Loading...
1config DRM_PANEL
2 bool
3 depends on DRM
4 help
5 Panel registration and lookup framework.
6
7menu "Display Panels"
8 depends on DRM && DRM_PANEL
9
10config DRM_PANEL_SIMPLE
11 tristate "support for simple panels"
12 depends on OF
13 depends on BACKLIGHT_CLASS_DEVICE
14 select VIDEOMODE_HELPERS
15 help
16 DRM panel driver for dumb panels that need at most a regulator and
17 a GPIO to be powered up. Optionally a backlight can be attached so
18 that it can be automatically turned off when the panel goes into a
19 low power state.
20
21config DRM_PANEL_SAMSUNG_LD9040
22 tristate "Samsung LD9040 RGB/SPI panel"
23 depends on OF && SPI
24 select VIDEOMODE_HELPERS
25
26config DRM_PANEL_LG_LG4573
27 tristate "LG4573 RGB/SPI panel"
28 depends on OF && SPI
29 select VIDEOMODE_HELPERS
30 help
31 Say Y here if you want to enable support for LG4573 RGB panel.
32 To compile this driver as a module, choose M here.
33
34config DRM_PANEL_PANASONIC_VVX10F034N00
35 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
36 depends on OF
37 depends on DRM_MIPI_DSI
38 depends on BACKLIGHT_CLASS_DEVICE
39 help
40 Say Y here if you want to enable support for Panasonic VVX10F034N00
41 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
42 Xperia Z2 tablets
43
44config DRM_PANEL_SAMSUNG_S6E8AA0
45 tristate "Samsung S6E8AA0 DSI video mode panel"
46 depends on OF
47 select DRM_MIPI_DSI
48 select VIDEOMODE_HELPERS
49
50config DRM_PANEL_SHARP_LQ101R1SX01
51 tristate "Sharp LQ101R1SX01 panel"
52 depends on OF
53 depends on DRM_MIPI_DSI
54 depends on BACKLIGHT_CLASS_DEVICE
55 help
56 Say Y here if you want to enable support for Sharp LQ101R1SX01
57 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
58 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
59 the host and has a built-in LED backlight.
60
61 To compile this driver as a module, choose M here: the module
62 will be called panel-sharp-lq101r1sx01.
63
64config DRM_PANEL_SHARP_LS043T1LE01
65 tristate "Sharp LS043T1LE01 qHD video mode panel"
66 depends on OF
67 depends on DRM_MIPI_DSI
68 depends on BACKLIGHT_CLASS_DEVICE
69 help
70 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
71 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
72
73endmenu
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3 bool
4 depends on DRM
5 help
6 Panel registration and lookup framework.
7
8menu "Display Panels"
9 depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12 tristate "ARM Versatile panel driver"
13 depends on OF
14 depends on MFD_SYSCON
15 select VIDEOMODE_HELPERS
16 help
17 This driver supports the ARM Versatile panels connected to ARM
18 reference designs. The panel is detected using special registers
19 in the Versatile family syscon registers.
20
21config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
22 tristate "ASUS Z00T TM5P5 NT35596 panel"
23 depends on GPIOLIB && OF
24 depends on DRM_MIPI_DSI
25 depends on BACKLIGHT_CLASS_DEVICE
26 help
27 Say Y here if you want to enable support for the ASUS TMP5P5
28 NT35596 1080x1920 video mode panel as found in some Asus
29 Zenfone 2 Laser Z00T devices.
30
31config DRM_PANEL_BOE_HIMAX8279D
32 tristate "Boe Himax8279d panel"
33 depends on OF
34 depends on DRM_MIPI_DSI
35 depends on BACKLIGHT_CLASS_DEVICE
36 help
37 Say Y here if you want to enable support for Boe Himax8279d
38 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
39 24 bit RGB per pixel. It provides a MIPI DSI interface to
40 the host and has a built-in LED backlight.
41
42config DRM_PANEL_BOE_TV101WUM_NL6
43 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
44 depends on OF
45 depends on DRM_MIPI_DSI
46 depends on BACKLIGHT_CLASS_DEVICE
47 help
48 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
49 45NA WUXGA PANEL DSI Video Mode panel
50
51config DRM_PANEL_LVDS
52 tristate "Generic LVDS panel driver"
53 depends on OF
54 depends on BACKLIGHT_CLASS_DEVICE
55 select VIDEOMODE_HELPERS
56 help
57 This driver supports LVDS panels that don't require device-specific
58 handling of power supplies or control signals. It implements automatic
59 backlight handling if the panel is attached to a backlight controller.
60
61config DRM_PANEL_SIMPLE
62 tristate "support for simple panels"
63 depends on OF
64 depends on BACKLIGHT_CLASS_DEVICE
65 select VIDEOMODE_HELPERS
66 help
67 DRM panel driver for dumb panels that need at most a regulator and
68 a GPIO to be powered up. Optionally a backlight can be attached so
69 that it can be automatically turned off when the panel goes into a
70 low power state.
71
72config DRM_PANEL_ELIDA_KD35T133
73 tristate "Elida KD35T133 panel driver"
74 depends on OF
75 depends on DRM_MIPI_DSI
76 depends on BACKLIGHT_CLASS_DEVICE
77 help
78 Say Y here if you want to enable support for the Elida
79 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
80 system interfaces.
81
82config DRM_PANEL_FEIXIN_K101_IM2BA02
83 tristate "Feixin K101 IM2BA02 panel"
84 depends on OF
85 depends on DRM_MIPI_DSI
86 depends on BACKLIGHT_CLASS_DEVICE
87 help
88 Say Y here if you want to enable support for the Feixin K101 IM2BA02
89 4-lane 800x1280 MIPI DSI panel.
90
91config DRM_PANEL_FEIYANG_FY07024DI26A30D
92 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
93 depends on OF
94 depends on DRM_MIPI_DSI
95 depends on BACKLIGHT_CLASS_DEVICE
96 help
97 Say Y if you want to enable support for panels based on the
98 Feiyang FY07024DI26A30-D MIPI-DSI interface.
99
100config DRM_PANEL_ILITEK_IL9322
101 tristate "Ilitek ILI9322 320x240 QVGA panels"
102 depends on OF && SPI
103 select REGMAP
104 help
105 Say Y here if you want to enable support for Ilitek IL9322
106 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
107
108config DRM_PANEL_ILITEK_ILI9881C
109 tristate "Ilitek ILI9881C-based panels"
110 depends on OF
111 depends on DRM_MIPI_DSI
112 depends on BACKLIGHT_CLASS_DEVICE
113 help
114 Say Y if you want to enable support for panels based on the
115 Ilitek ILI9881c controller.
116
117config DRM_PANEL_INNOLUX_P079ZCA
118 tristate "Innolux P079ZCA panel"
119 depends on OF
120 depends on DRM_MIPI_DSI
121 depends on BACKLIGHT_CLASS_DEVICE
122 help
123 Say Y here if you want to enable support for Innolux P079ZCA
124 TFT-LCD modules. The panel has a 1024x768 resolution and uses
125 24 bit RGB per pixel. It provides a MIPI DSI interface to
126 the host and has a built-in LED backlight.
127
128config DRM_PANEL_JDI_LT070ME05000
129 tristate "JDI LT070ME05000 WUXGA DSI panel"
130 depends on OF
131 depends on DRM_MIPI_DSI
132 depends on BACKLIGHT_CLASS_DEVICE
133 help
134 Say Y here if you want to enable support for JDI DSI video mode
135 panel as found in Google Nexus 7 (2013) devices.
136 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
137 24 bit per pixel.
138
139config DRM_PANEL_KINGDISPLAY_KD097D04
140 tristate "Kingdisplay kd097d04 panel"
141 depends on OF
142 depends on DRM_MIPI_DSI
143 depends on BACKLIGHT_CLASS_DEVICE
144 help
145 Say Y here if you want to enable support for Kingdisplay kd097d04
146 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
147 24 bit RGB per pixel. It provides a MIPI DSI interface to
148 the host and has a built-in LED backlight.
149
150config DRM_PANEL_LEADTEK_LTK050H3146W
151 tristate "Leadtek LTK050H3146W panel"
152 depends on OF
153 depends on DRM_MIPI_DSI
154 depends on BACKLIGHT_CLASS_DEVICE
155 help
156 Say Y here if you want to enable support for Leadtek LTK050H3146W
157 TFT-LCD modules. The panel has a 720x1280 resolution and uses
158 24 bit RGB per pixel. It provides a MIPI DSI interface to
159 the host and has a built-in LED backlight.
160
161config DRM_PANEL_LEADTEK_LTK500HD1829
162 tristate "Leadtek LTK500HD1829 panel"
163 depends on OF
164 depends on DRM_MIPI_DSI
165 depends on BACKLIGHT_CLASS_DEVICE
166 help
167 Say Y here if you want to enable support for Kingdisplay kd097d04
168 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
169 24 bit RGB per pixel. It provides a MIPI DSI interface to
170 the host and has a built-in LED backlight.
171
172config DRM_PANEL_SAMSUNG_LD9040
173 tristate "Samsung LD9040 RGB/SPI panel"
174 depends on OF && SPI
175 select VIDEOMODE_HELPERS
176
177config DRM_PANEL_LG_LB035Q02
178 tristate "LG LB035Q024573 RGB panel"
179 depends on GPIOLIB && OF && SPI
180 help
181 Say Y here if you want to enable support for the LB035Q02 RGB panel
182 (found on the Gumstix Overo Palo35 board). To compile this driver as
183 a module, choose M here.
184
185config DRM_PANEL_LG_LG4573
186 tristate "LG4573 RGB/SPI panel"
187 depends on OF && SPI
188 select VIDEOMODE_HELPERS
189 help
190 Say Y here if you want to enable support for LG4573 RGB panel.
191 To compile this driver as a module, choose M here.
192
193config DRM_PANEL_NEC_NL8048HL11
194 tristate "NEC NL8048HL11 RGB panel"
195 depends on GPIOLIB && OF && SPI
196 help
197 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
198 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
199 as a module, choose M here.
200
201config DRM_PANEL_NOVATEK_NT35510
202 tristate "Novatek NT35510 RGB panel driver"
203 depends on OF
204 depends on DRM_MIPI_DSI
205 depends on BACKLIGHT_CLASS_DEVICE
206 help
207 Say Y here if you want to enable support for the panels built
208 around the Novatek NT35510 display controller, such as some
209 Hydis panels.
210
211config DRM_PANEL_NOVATEK_NT39016
212 tristate "Novatek NT39016 RGB/SPI panel"
213 depends on OF && SPI
214 depends on BACKLIGHT_CLASS_DEVICE
215 select REGMAP_SPI
216 help
217 Say Y here if you want to enable support for the panels built
218 around the Novatek NT39016 display controller.
219
220config DRM_PANEL_OLIMEX_LCD_OLINUXINO
221 tristate "Olimex LCD-OLinuXino panel"
222 depends on OF
223 depends on I2C
224 depends on BACKLIGHT_CLASS_DEVICE
225 help
226 The panel is used with different sizes LCDs, from 480x272 to
227 1280x800, and 24 bit per pixel.
228
229 Say Y here if you want to enable support for Olimex Ltd.
230 LCD-OLinuXino panel.
231
232config DRM_PANEL_ORISETECH_OTM8009A
233 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
234 depends on OF
235 depends on DRM_MIPI_DSI
236 depends on BACKLIGHT_CLASS_DEVICE
237 help
238 Say Y here if you want to enable support for Orise Technology
239 otm8009a 480x800 dsi 2dl panel.
240
241config DRM_PANEL_OSD_OSD101T2587_53TS
242 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
243 depends on OF
244 depends on DRM_MIPI_DSI
245 depends on BACKLIGHT_CLASS_DEVICE
246 help
247 Say Y here if you want to enable support for One Stop Displays
248 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
249
250config DRM_PANEL_PANASONIC_VVX10F034N00
251 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
252 depends on OF
253 depends on DRM_MIPI_DSI
254 depends on BACKLIGHT_CLASS_DEVICE
255 help
256 Say Y here if you want to enable support for Panasonic VVX10F034N00
257 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
258 Xperia Z2 tablets
259
260config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
261 tristate "Raspberry Pi 7-inch touchscreen panel"
262 depends on DRM_MIPI_DSI
263 help
264 Say Y here if you want to enable support for the Raspberry
265 Pi 7" Touchscreen. To compile this driver as a module,
266 choose M here.
267
268config DRM_PANEL_RAYDIUM_RM67191
269 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
270 depends on OF
271 depends on DRM_MIPI_DSI
272 depends on BACKLIGHT_CLASS_DEVICE
273 help
274 Say Y here if you want to enable support for Raydium RM67191 FHD
275 (1080x1920) DSI panel.
276
277config DRM_PANEL_RAYDIUM_RM68200
278 tristate "Raydium RM68200 720x1280 DSI video mode panel"
279 depends on OF
280 depends on DRM_MIPI_DSI
281 depends on BACKLIGHT_CLASS_DEVICE
282 help
283 Say Y here if you want to enable support for Raydium RM68200
284 720x1280 DSI video mode panel.
285
286config DRM_PANEL_RONBO_RB070D30
287 tristate "Ronbo Electronics RB070D30 panel"
288 depends on OF
289 depends on DRM_MIPI_DSI
290 depends on BACKLIGHT_CLASS_DEVICE
291 help
292 Say Y here if you want to enable support for Ronbo Electronics
293 RB070D30 1024x600 DSI panel.
294
295config DRM_PANEL_SAMSUNG_S6D16D0
296 tristate "Samsung S6D16D0 DSI video mode panel"
297 depends on OF
298 depends on DRM_MIPI_DSI
299 select VIDEOMODE_HELPERS
300
301config DRM_PANEL_SAMSUNG_S6E3HA2
302 tristate "Samsung S6E3HA2 DSI video mode panel"
303 depends on OF
304 depends on DRM_MIPI_DSI
305 depends on BACKLIGHT_CLASS_DEVICE
306 select VIDEOMODE_HELPERS
307
308config DRM_PANEL_SAMSUNG_S6E63J0X03
309 tristate "Samsung S6E63J0X03 DSI command mode panel"
310 depends on OF
311 depends on DRM_MIPI_DSI
312 depends on BACKLIGHT_CLASS_DEVICE
313 select VIDEOMODE_HELPERS
314
315config DRM_PANEL_SAMSUNG_S6E63M0
316 tristate "Samsung S6E63M0 RGB/SPI panel"
317 depends on OF
318 depends on SPI
319 depends on BACKLIGHT_CLASS_DEVICE
320 help
321 Say Y here if you want to enable support for Samsung S6E63M0
322 AMOLED LCD panel.
323
324config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
325 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
326 depends on OF
327 select DRM_MIPI_DSI
328 select VIDEOMODE_HELPERS
329
330config DRM_PANEL_SAMSUNG_S6E8AA0
331 tristate "Samsung S6E8AA0 DSI video mode panel"
332 depends on OF
333 select DRM_MIPI_DSI
334 select VIDEOMODE_HELPERS
335
336config DRM_PANEL_SEIKO_43WVF1G
337 tristate "Seiko 43WVF1G panel"
338 depends on OF
339 depends on BACKLIGHT_CLASS_DEVICE
340 select VIDEOMODE_HELPERS
341 help
342 Say Y here if you want to enable support for the Seiko
343 43WVF1G controller for 800x480 LCD panels
344
345config DRM_PANEL_SHARP_LQ101R1SX01
346 tristate "Sharp LQ101R1SX01 panel"
347 depends on OF
348 depends on DRM_MIPI_DSI
349 depends on BACKLIGHT_CLASS_DEVICE
350 help
351 Say Y here if you want to enable support for Sharp LQ101R1SX01
352 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
353 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
354 the host and has a built-in LED backlight.
355
356 To compile this driver as a module, choose M here: the module
357 will be called panel-sharp-lq101r1sx01.
358
359config DRM_PANEL_SHARP_LS037V7DW01
360 tristate "Sharp LS037V7DW01 VGA LCD panel"
361 depends on GPIOLIB && OF && REGULATOR
362 help
363 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
364 (480x640) LCD panel (found on the TI SDP3430 board).
365
366config DRM_PANEL_SHARP_LS043T1LE01
367 tristate "Sharp LS043T1LE01 qHD video mode panel"
368 depends on OF
369 depends on DRM_MIPI_DSI
370 depends on BACKLIGHT_CLASS_DEVICE
371 help
372 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
373 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
374
375config DRM_PANEL_SITRONIX_ST7701
376 tristate "Sitronix ST7701 panel driver"
377 depends on OF
378 depends on DRM_MIPI_DSI
379 depends on BACKLIGHT_CLASS_DEVICE
380 help
381 Say Y here if you want to enable support for the Sitronix
382 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
383 system interfaces.
384
385config DRM_PANEL_SITRONIX_ST7703
386 tristate "Sitronix ST7703 based MIPI touchscreen panels"
387 depends on OF
388 depends on DRM_MIPI_DSI
389 depends on BACKLIGHT_CLASS_DEVICE
390 help
391 Say Y here if you want to enable support for Sitronix ST7703 based
392 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
393 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
394 in backlight and touch controller.
395 Touch input support is provided by the goodix driver and needs to be
396 selected separately.
397
398config DRM_PANEL_SITRONIX_ST7789V
399 tristate "Sitronix ST7789V panel"
400 depends on OF && SPI
401 depends on BACKLIGHT_CLASS_DEVICE
402 help
403 Say Y here if you want to enable support for the Sitronix
404 ST7789V controller for 240x320 LCD panels
405
406config DRM_PANEL_SONY_ACX424AKP
407 tristate "Sony ACX424AKP DSI command mode panel"
408 depends on OF
409 depends on DRM_MIPI_DSI
410 depends on BACKLIGHT_CLASS_DEVICE
411 select VIDEOMODE_HELPERS
412 help
413 Say Y here if you want to enable the Sony ACX424 display
414 panel. This panel supports DSI in both command and video
415 mode.
416
417config DRM_PANEL_SONY_ACX565AKM
418 tristate "Sony ACX565AKM panel"
419 depends on GPIOLIB && OF && SPI
420 depends on BACKLIGHT_CLASS_DEVICE
421 help
422 Say Y here if you want to enable support for the Sony ACX565AKM
423 800x600 3.5" panel (found on the Nokia N900).
424
425config DRM_PANEL_TPO_TD028TTEC1
426 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
427 depends on OF && SPI
428 depends on BACKLIGHT_CLASS_DEVICE
429 help
430 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
431 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
432
433config DRM_PANEL_TPO_TD043MTEA1
434 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
435 depends on GPIOLIB && OF && REGULATOR && SPI
436 help
437 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
438 4.3" panel (found on the OMAP3 Pandora board).
439
440config DRM_PANEL_TPO_TPG110
441 tristate "TPO TPG 800x400 panel"
442 depends on OF && SPI && GPIOLIB
443 depends on BACKLIGHT_CLASS_DEVICE
444 help
445 Say Y here if you want to enable support for TPO TPG110
446 400CH LTPS TFT LCD Single Chip Digital Driver for up to
447 800x400 LCD panels.
448
449config DRM_PANEL_TRULY_NT35597_WQXGA
450 tristate "Truly WQXGA"
451 depends on OF
452 depends on DRM_MIPI_DSI
453 help
454 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
455 Video Mode panel
456
457config DRM_PANEL_VISIONOX_RM69299
458 tristate "Visionox RM69299"
459 depends on OF
460 depends on DRM_MIPI_DSI
461 help
462 Say Y here if you want to enable support for Visionox
463 RM69299 DSI Video Mode panel.
464
465config DRM_PANEL_XINPENG_XPP055C272
466 tristate "Xinpeng XPP055C272 panel driver"
467 depends on OF
468 depends on DRM_MIPI_DSI
469 depends on BACKLIGHT_CLASS_DEVICE
470 help
471 Say Y here if you want to enable support for the Xinpeng
472 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
473 system interfaces.
474endmenu