Loading...
1/*
2 * DMM IOMMU driver support functions for TI OMAP processors.
3 *
4 * Author: Rob Clark <rob@ti.com>
5 * Andy Gross <andy.gross@ti.com>
6 *
7 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation version 2.
12 *
13 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
14 * kind, whether express or implied; without even the implied warranty
15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 */
18
19#include <linux/completion.h>
20#include <linux/delay.h>
21#include <linux/dma-mapping.h>
22#include <linux/errno.h>
23#include <linux/init.h>
24#include <linux/interrupt.h>
25#include <linux/list.h>
26#include <linux/mm.h>
27#include <linux/module.h>
28#include <linux/platform_device.h> /* platform_device() */
29#include <linux/sched.h>
30#include <linux/slab.h>
31#include <linux/time.h>
32#include <linux/vmalloc.h>
33#include <linux/wait.h>
34
35#include "omap_dmm_tiler.h"
36#include "omap_dmm_priv.h"
37
38#define DMM_DRIVER_NAME "dmm"
39
40/* mappings for associating views to luts */
41static struct tcm *containers[TILFMT_NFORMATS];
42static struct dmm *omap_dmm;
43
44#if defined(CONFIG_OF)
45static const struct of_device_id dmm_of_match[];
46#endif
47
48/* global spinlock for protecting lists */
49static DEFINE_SPINLOCK(list_lock);
50
51/* Geometry table */
52#define GEOM(xshift, yshift, bytes_per_pixel) { \
53 .x_shft = (xshift), \
54 .y_shft = (yshift), \
55 .cpp = (bytes_per_pixel), \
56 .slot_w = 1 << (SLOT_WIDTH_BITS - (xshift)), \
57 .slot_h = 1 << (SLOT_HEIGHT_BITS - (yshift)), \
58 }
59
60static const struct {
61 uint32_t x_shft; /* unused X-bits (as part of bpp) */
62 uint32_t y_shft; /* unused Y-bits (as part of bpp) */
63 uint32_t cpp; /* bytes/chars per pixel */
64 uint32_t slot_w; /* width of each slot (in pixels) */
65 uint32_t slot_h; /* height of each slot (in pixels) */
66} geom[TILFMT_NFORMATS] = {
67 [TILFMT_8BIT] = GEOM(0, 0, 1),
68 [TILFMT_16BIT] = GEOM(0, 1, 2),
69 [TILFMT_32BIT] = GEOM(1, 1, 4),
70 [TILFMT_PAGE] = GEOM(SLOT_WIDTH_BITS, SLOT_HEIGHT_BITS, 1),
71};
72
73
74/* lookup table for registers w/ per-engine instances */
75static const uint32_t reg[][4] = {
76 [PAT_STATUS] = {DMM_PAT_STATUS__0, DMM_PAT_STATUS__1,
77 DMM_PAT_STATUS__2, DMM_PAT_STATUS__3},
78 [PAT_DESCR] = {DMM_PAT_DESCR__0, DMM_PAT_DESCR__1,
79 DMM_PAT_DESCR__2, DMM_PAT_DESCR__3},
80};
81
82static u32 dmm_read(struct dmm *dmm, u32 reg)
83{
84 return readl(dmm->base + reg);
85}
86
87static void dmm_write(struct dmm *dmm, u32 val, u32 reg)
88{
89 writel(val, dmm->base + reg);
90}
91
92/* simple allocator to grab next 16 byte aligned memory from txn */
93static void *alloc_dma(struct dmm_txn *txn, size_t sz, dma_addr_t *pa)
94{
95 void *ptr;
96 struct refill_engine *engine = txn->engine_handle;
97
98 /* dmm programming requires 16 byte aligned addresses */
99 txn->current_pa = round_up(txn->current_pa, 16);
100 txn->current_va = (void *)round_up((long)txn->current_va, 16);
101
102 ptr = txn->current_va;
103 *pa = txn->current_pa;
104
105 txn->current_pa += sz;
106 txn->current_va += sz;
107
108 BUG_ON((txn->current_va - engine->refill_va) > REFILL_BUFFER_SIZE);
109
110 return ptr;
111}
112
113/* check status and spin until wait_mask comes true */
114static int wait_status(struct refill_engine *engine, uint32_t wait_mask)
115{
116 struct dmm *dmm = engine->dmm;
117 uint32_t r = 0, err, i;
118
119 i = DMM_FIXED_RETRY_COUNT;
120 while (true) {
121 r = dmm_read(dmm, reg[PAT_STATUS][engine->id]);
122 err = r & DMM_PATSTATUS_ERR;
123 if (err)
124 return -EFAULT;
125
126 if ((r & wait_mask) == wait_mask)
127 break;
128
129 if (--i == 0)
130 return -ETIMEDOUT;
131
132 udelay(1);
133 }
134
135 return 0;
136}
137
138static void release_engine(struct refill_engine *engine)
139{
140 unsigned long flags;
141
142 spin_lock_irqsave(&list_lock, flags);
143 list_add(&engine->idle_node, &omap_dmm->idle_head);
144 spin_unlock_irqrestore(&list_lock, flags);
145
146 atomic_inc(&omap_dmm->engine_counter);
147 wake_up_interruptible(&omap_dmm->engine_queue);
148}
149
150static irqreturn_t omap_dmm_irq_handler(int irq, void *arg)
151{
152 struct dmm *dmm = arg;
153 uint32_t status = dmm_read(dmm, DMM_PAT_IRQSTATUS);
154 int i;
155
156 /* ack IRQ */
157 dmm_write(dmm, status, DMM_PAT_IRQSTATUS);
158
159 for (i = 0; i < dmm->num_engines; i++) {
160 if (status & DMM_IRQSTAT_LST) {
161 if (dmm->engines[i].async)
162 release_engine(&dmm->engines[i]);
163
164 complete(&dmm->engines[i].compl);
165 }
166
167 status >>= 8;
168 }
169
170 return IRQ_HANDLED;
171}
172
173/**
174 * Get a handle for a DMM transaction
175 */
176static struct dmm_txn *dmm_txn_init(struct dmm *dmm, struct tcm *tcm)
177{
178 struct dmm_txn *txn = NULL;
179 struct refill_engine *engine = NULL;
180 int ret;
181 unsigned long flags;
182
183
184 /* wait until an engine is available */
185 ret = wait_event_interruptible(omap_dmm->engine_queue,
186 atomic_add_unless(&omap_dmm->engine_counter, -1, 0));
187 if (ret)
188 return ERR_PTR(ret);
189
190 /* grab an idle engine */
191 spin_lock_irqsave(&list_lock, flags);
192 if (!list_empty(&dmm->idle_head)) {
193 engine = list_entry(dmm->idle_head.next, struct refill_engine,
194 idle_node);
195 list_del(&engine->idle_node);
196 }
197 spin_unlock_irqrestore(&list_lock, flags);
198
199 BUG_ON(!engine);
200
201 txn = &engine->txn;
202 engine->tcm = tcm;
203 txn->engine_handle = engine;
204 txn->last_pat = NULL;
205 txn->current_va = engine->refill_va;
206 txn->current_pa = engine->refill_pa;
207
208 return txn;
209}
210
211/**
212 * Add region to DMM transaction. If pages or pages[i] is NULL, then the
213 * corresponding slot is cleared (ie. dummy_pa is programmed)
214 */
215static void dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
216 struct page **pages, uint32_t npages, uint32_t roll)
217{
218 dma_addr_t pat_pa = 0, data_pa = 0;
219 uint32_t *data;
220 struct pat *pat;
221 struct refill_engine *engine = txn->engine_handle;
222 int columns = (1 + area->x1 - area->x0);
223 int rows = (1 + area->y1 - area->y0);
224 int i = columns*rows;
225
226 pat = alloc_dma(txn, sizeof(struct pat), &pat_pa);
227
228 if (txn->last_pat)
229 txn->last_pat->next_pa = (uint32_t)pat_pa;
230
231 pat->area = *area;
232
233 /* adjust Y coordinates based off of container parameters */
234 pat->area.y0 += engine->tcm->y_offset;
235 pat->area.y1 += engine->tcm->y_offset;
236
237 pat->ctrl = (struct pat_ctrl){
238 .start = 1,
239 .lut_id = engine->tcm->lut_id,
240 };
241
242 data = alloc_dma(txn, 4*i, &data_pa);
243 /* FIXME: what if data_pa is more than 32-bit ? */
244 pat->data_pa = data_pa;
245
246 while (i--) {
247 int n = i + roll;
248 if (n >= npages)
249 n -= npages;
250 data[i] = (pages && pages[n]) ?
251 page_to_phys(pages[n]) : engine->dmm->dummy_pa;
252 }
253
254 txn->last_pat = pat;
255
256 return;
257}
258
259/**
260 * Commit the DMM transaction.
261 */
262static int dmm_txn_commit(struct dmm_txn *txn, bool wait)
263{
264 int ret = 0;
265 struct refill_engine *engine = txn->engine_handle;
266 struct dmm *dmm = engine->dmm;
267
268 if (!txn->last_pat) {
269 dev_err(engine->dmm->dev, "need at least one txn\n");
270 ret = -EINVAL;
271 goto cleanup;
272 }
273
274 txn->last_pat->next_pa = 0;
275
276 /* write to PAT_DESCR to clear out any pending transaction */
277 dmm_write(dmm, 0x0, reg[PAT_DESCR][engine->id]);
278
279 /* wait for engine ready: */
280 ret = wait_status(engine, DMM_PATSTATUS_READY);
281 if (ret) {
282 ret = -EFAULT;
283 goto cleanup;
284 }
285
286 /* mark whether it is async to denote list management in IRQ handler */
287 engine->async = wait ? false : true;
288 reinit_completion(&engine->compl);
289 /* verify that the irq handler sees the 'async' and completion value */
290 smp_mb();
291
292 /* kick reload */
293 dmm_write(dmm, engine->refill_pa, reg[PAT_DESCR][engine->id]);
294
295 if (wait) {
296 if (!wait_for_completion_timeout(&engine->compl,
297 msecs_to_jiffies(100))) {
298 dev_err(dmm->dev, "timed out waiting for done\n");
299 ret = -ETIMEDOUT;
300 }
301 }
302
303cleanup:
304 /* only place engine back on list if we are done with it */
305 if (ret || wait)
306 release_engine(engine);
307
308 return ret;
309}
310
311/*
312 * DMM programming
313 */
314static int fill(struct tcm_area *area, struct page **pages,
315 uint32_t npages, uint32_t roll, bool wait)
316{
317 int ret = 0;
318 struct tcm_area slice, area_s;
319 struct dmm_txn *txn;
320
321 /*
322 * FIXME
323 *
324 * Asynchronous fill does not work reliably, as the driver does not
325 * handle errors in the async code paths. The fill operation may
326 * silently fail, leading to leaking DMM engines, which may eventually
327 * lead to deadlock if we run out of DMM engines.
328 *
329 * For now, always set 'wait' so that we only use sync fills. Async
330 * fills should be fixed, or alternatively we could decide to only
331 * support sync fills and so the whole async code path could be removed.
332 */
333
334 wait = true;
335
336 txn = dmm_txn_init(omap_dmm, area->tcm);
337 if (IS_ERR_OR_NULL(txn))
338 return -ENOMEM;
339
340 tcm_for_each_slice(slice, *area, area_s) {
341 struct pat_area p_area = {
342 .x0 = slice.p0.x, .y0 = slice.p0.y,
343 .x1 = slice.p1.x, .y1 = slice.p1.y,
344 };
345
346 dmm_txn_append(txn, &p_area, pages, npages, roll);
347
348 roll += tcm_sizeof(slice);
349 }
350
351 ret = dmm_txn_commit(txn, wait);
352
353 return ret;
354}
355
356/*
357 * Pin/unpin
358 */
359
360/* note: slots for which pages[i] == NULL are filled w/ dummy page
361 */
362int tiler_pin(struct tiler_block *block, struct page **pages,
363 uint32_t npages, uint32_t roll, bool wait)
364{
365 int ret;
366
367 ret = fill(&block->area, pages, npages, roll, wait);
368
369 if (ret)
370 tiler_unpin(block);
371
372 return ret;
373}
374
375int tiler_unpin(struct tiler_block *block)
376{
377 return fill(&block->area, NULL, 0, 0, false);
378}
379
380/*
381 * Reserve/release
382 */
383struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w,
384 uint16_t h, uint16_t align)
385{
386 struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
387 u32 min_align = 128;
388 int ret;
389 unsigned long flags;
390 size_t slot_bytes;
391
392 BUG_ON(!validfmt(fmt));
393
394 /* convert width/height to slots */
395 w = DIV_ROUND_UP(w, geom[fmt].slot_w);
396 h = DIV_ROUND_UP(h, geom[fmt].slot_h);
397
398 /* convert alignment to slots */
399 slot_bytes = geom[fmt].slot_w * geom[fmt].cpp;
400 min_align = max(min_align, slot_bytes);
401 align = (align > min_align) ? ALIGN(align, min_align) : min_align;
402 align /= slot_bytes;
403
404 block->fmt = fmt;
405
406 ret = tcm_reserve_2d(containers[fmt], w, h, align, -1, slot_bytes,
407 &block->area);
408 if (ret) {
409 kfree(block);
410 return ERR_PTR(-ENOMEM);
411 }
412
413 /* add to allocation list */
414 spin_lock_irqsave(&list_lock, flags);
415 list_add(&block->alloc_node, &omap_dmm->alloc_head);
416 spin_unlock_irqrestore(&list_lock, flags);
417
418 return block;
419}
420
421struct tiler_block *tiler_reserve_1d(size_t size)
422{
423 struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
424 int num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
425 unsigned long flags;
426
427 if (!block)
428 return ERR_PTR(-ENOMEM);
429
430 block->fmt = TILFMT_PAGE;
431
432 if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages,
433 &block->area)) {
434 kfree(block);
435 return ERR_PTR(-ENOMEM);
436 }
437
438 spin_lock_irqsave(&list_lock, flags);
439 list_add(&block->alloc_node, &omap_dmm->alloc_head);
440 spin_unlock_irqrestore(&list_lock, flags);
441
442 return block;
443}
444
445/* note: if you have pin'd pages, you should have already unpin'd first! */
446int tiler_release(struct tiler_block *block)
447{
448 int ret = tcm_free(&block->area);
449 unsigned long flags;
450
451 if (block->area.tcm)
452 dev_err(omap_dmm->dev, "failed to release block\n");
453
454 spin_lock_irqsave(&list_lock, flags);
455 list_del(&block->alloc_node);
456 spin_unlock_irqrestore(&list_lock, flags);
457
458 kfree(block);
459 return ret;
460}
461
462/*
463 * Utils
464 */
465
466/* calculate the tiler space address of a pixel in a view orientation...
467 * below description copied from the display subsystem section of TRM:
468 *
469 * When the TILER is addressed, the bits:
470 * [28:27] = 0x0 for 8-bit tiled
471 * 0x1 for 16-bit tiled
472 * 0x2 for 32-bit tiled
473 * 0x3 for page mode
474 * [31:29] = 0x0 for 0-degree view
475 * 0x1 for 180-degree view + mirroring
476 * 0x2 for 0-degree view + mirroring
477 * 0x3 for 180-degree view
478 * 0x4 for 270-degree view + mirroring
479 * 0x5 for 270-degree view
480 * 0x6 for 90-degree view
481 * 0x7 for 90-degree view + mirroring
482 * Otherwise the bits indicated the corresponding bit address to access
483 * the SDRAM.
484 */
485static u32 tiler_get_address(enum tiler_fmt fmt, u32 orient, u32 x, u32 y)
486{
487 u32 x_bits, y_bits, tmp, x_mask, y_mask, alignment;
488
489 x_bits = CONT_WIDTH_BITS - geom[fmt].x_shft;
490 y_bits = CONT_HEIGHT_BITS - geom[fmt].y_shft;
491 alignment = geom[fmt].x_shft + geom[fmt].y_shft;
492
493 /* validate coordinate */
494 x_mask = MASK(x_bits);
495 y_mask = MASK(y_bits);
496
497 if (x < 0 || x > x_mask || y < 0 || y > y_mask) {
498 DBG("invalid coords: %u < 0 || %u > %u || %u < 0 || %u > %u",
499 x, x, x_mask, y, y, y_mask);
500 return 0;
501 }
502
503 /* account for mirroring */
504 if (orient & MASK_X_INVERT)
505 x ^= x_mask;
506 if (orient & MASK_Y_INVERT)
507 y ^= y_mask;
508
509 /* get coordinate address */
510 if (orient & MASK_XY_FLIP)
511 tmp = ((x << y_bits) + y);
512 else
513 tmp = ((y << x_bits) + x);
514
515 return TIL_ADDR((tmp << alignment), orient, fmt);
516}
517
518dma_addr_t tiler_ssptr(struct tiler_block *block)
519{
520 BUG_ON(!validfmt(block->fmt));
521
522 return TILVIEW_8BIT + tiler_get_address(block->fmt, 0,
523 block->area.p0.x * geom[block->fmt].slot_w,
524 block->area.p0.y * geom[block->fmt].slot_h);
525}
526
527dma_addr_t tiler_tsptr(struct tiler_block *block, uint32_t orient,
528 uint32_t x, uint32_t y)
529{
530 struct tcm_pt *p = &block->area.p0;
531 BUG_ON(!validfmt(block->fmt));
532
533 return tiler_get_address(block->fmt, orient,
534 (p->x * geom[block->fmt].slot_w) + x,
535 (p->y * geom[block->fmt].slot_h) + y);
536}
537
538void tiler_align(enum tiler_fmt fmt, uint16_t *w, uint16_t *h)
539{
540 BUG_ON(!validfmt(fmt));
541 *w = round_up(*w, geom[fmt].slot_w);
542 *h = round_up(*h, geom[fmt].slot_h);
543}
544
545uint32_t tiler_stride(enum tiler_fmt fmt, uint32_t orient)
546{
547 BUG_ON(!validfmt(fmt));
548
549 if (orient & MASK_XY_FLIP)
550 return 1 << (CONT_HEIGHT_BITS + geom[fmt].x_shft);
551 else
552 return 1 << (CONT_WIDTH_BITS + geom[fmt].y_shft);
553}
554
555size_t tiler_size(enum tiler_fmt fmt, uint16_t w, uint16_t h)
556{
557 tiler_align(fmt, &w, &h);
558 return geom[fmt].cpp * w * h;
559}
560
561size_t tiler_vsize(enum tiler_fmt fmt, uint16_t w, uint16_t h)
562{
563 BUG_ON(!validfmt(fmt));
564 return round_up(geom[fmt].cpp * w, PAGE_SIZE) * h;
565}
566
567uint32_t tiler_get_cpu_cache_flags(void)
568{
569 return omap_dmm->plat_data->cpu_cache_flags;
570}
571
572bool dmm_is_available(void)
573{
574 return omap_dmm ? true : false;
575}
576
577static int omap_dmm_remove(struct platform_device *dev)
578{
579 struct tiler_block *block, *_block;
580 int i;
581 unsigned long flags;
582
583 if (omap_dmm) {
584 /* free all area regions */
585 spin_lock_irqsave(&list_lock, flags);
586 list_for_each_entry_safe(block, _block, &omap_dmm->alloc_head,
587 alloc_node) {
588 list_del(&block->alloc_node);
589 kfree(block);
590 }
591 spin_unlock_irqrestore(&list_lock, flags);
592
593 for (i = 0; i < omap_dmm->num_lut; i++)
594 if (omap_dmm->tcm && omap_dmm->tcm[i])
595 omap_dmm->tcm[i]->deinit(omap_dmm->tcm[i]);
596 kfree(omap_dmm->tcm);
597
598 kfree(omap_dmm->engines);
599 if (omap_dmm->refill_va)
600 dma_free_wc(omap_dmm->dev,
601 REFILL_BUFFER_SIZE * omap_dmm->num_engines,
602 omap_dmm->refill_va, omap_dmm->refill_pa);
603 if (omap_dmm->dummy_page)
604 __free_page(omap_dmm->dummy_page);
605
606 if (omap_dmm->irq > 0)
607 free_irq(omap_dmm->irq, omap_dmm);
608
609 iounmap(omap_dmm->base);
610 kfree(omap_dmm);
611 omap_dmm = NULL;
612 }
613
614 return 0;
615}
616
617static int omap_dmm_probe(struct platform_device *dev)
618{
619 int ret = -EFAULT, i;
620 struct tcm_area area = {0};
621 u32 hwinfo, pat_geom;
622 struct resource *mem;
623
624 omap_dmm = kzalloc(sizeof(*omap_dmm), GFP_KERNEL);
625 if (!omap_dmm)
626 goto fail;
627
628 /* initialize lists */
629 INIT_LIST_HEAD(&omap_dmm->alloc_head);
630 INIT_LIST_HEAD(&omap_dmm->idle_head);
631
632 init_waitqueue_head(&omap_dmm->engine_queue);
633
634 if (dev->dev.of_node) {
635 const struct of_device_id *match;
636
637 match = of_match_node(dmm_of_match, dev->dev.of_node);
638 if (!match) {
639 dev_err(&dev->dev, "failed to find matching device node\n");
640 return -ENODEV;
641 }
642
643 omap_dmm->plat_data = match->data;
644 }
645
646 /* lookup hwmod data - base address and irq */
647 mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
648 if (!mem) {
649 dev_err(&dev->dev, "failed to get base address resource\n");
650 goto fail;
651 }
652
653 omap_dmm->base = ioremap(mem->start, SZ_2K);
654
655 if (!omap_dmm->base) {
656 dev_err(&dev->dev, "failed to get dmm base address\n");
657 goto fail;
658 }
659
660 omap_dmm->irq = platform_get_irq(dev, 0);
661 if (omap_dmm->irq < 0) {
662 dev_err(&dev->dev, "failed to get IRQ resource\n");
663 goto fail;
664 }
665
666 omap_dmm->dev = &dev->dev;
667
668 hwinfo = dmm_read(omap_dmm, DMM_PAT_HWINFO);
669 omap_dmm->num_engines = (hwinfo >> 24) & 0x1F;
670 omap_dmm->num_lut = (hwinfo >> 16) & 0x1F;
671 omap_dmm->container_width = 256;
672 omap_dmm->container_height = 128;
673
674 atomic_set(&omap_dmm->engine_counter, omap_dmm->num_engines);
675
676 /* read out actual LUT width and height */
677 pat_geom = dmm_read(omap_dmm, DMM_PAT_GEOMETRY);
678 omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5;
679 omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5;
680
681 /* increment LUT by one if on OMAP5 */
682 /* LUT has twice the height, and is split into a separate container */
683 if (omap_dmm->lut_height != omap_dmm->container_height)
684 omap_dmm->num_lut++;
685
686 /* initialize DMM registers */
687 dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__0);
688 dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__1);
689 dmm_write(omap_dmm, 0x80808080, DMM_PAT_VIEW_MAP__0);
690 dmm_write(omap_dmm, 0x80000000, DMM_PAT_VIEW_MAP_BASE);
691 dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__0);
692 dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__1);
693
694 ret = request_irq(omap_dmm->irq, omap_dmm_irq_handler, IRQF_SHARED,
695 "omap_dmm_irq_handler", omap_dmm);
696
697 if (ret) {
698 dev_err(&dev->dev, "couldn't register IRQ %d, error %d\n",
699 omap_dmm->irq, ret);
700 omap_dmm->irq = -1;
701 goto fail;
702 }
703
704 /* Enable all interrupts for each refill engine except
705 * ERR_LUT_MISS<n> (which is just advisory, and we don't care
706 * about because we want to be able to refill live scanout
707 * buffers for accelerated pan/scroll) and FILL_DSC<n> which
708 * we just generally don't care about.
709 */
710 dmm_write(omap_dmm, 0x7e7e7e7e, DMM_PAT_IRQENABLE_SET);
711
712 omap_dmm->dummy_page = alloc_page(GFP_KERNEL | __GFP_DMA32);
713 if (!omap_dmm->dummy_page) {
714 dev_err(&dev->dev, "could not allocate dummy page\n");
715 ret = -ENOMEM;
716 goto fail;
717 }
718
719 /* set dma mask for device */
720 ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
721 if (ret)
722 goto fail;
723
724 omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page);
725
726 /* alloc refill memory */
727 omap_dmm->refill_va = dma_alloc_wc(&dev->dev,
728 REFILL_BUFFER_SIZE * omap_dmm->num_engines,
729 &omap_dmm->refill_pa, GFP_KERNEL);
730 if (!omap_dmm->refill_va) {
731 dev_err(&dev->dev, "could not allocate refill memory\n");
732 goto fail;
733 }
734
735 /* alloc engines */
736 omap_dmm->engines = kcalloc(omap_dmm->num_engines,
737 sizeof(struct refill_engine), GFP_KERNEL);
738 if (!omap_dmm->engines) {
739 ret = -ENOMEM;
740 goto fail;
741 }
742
743 for (i = 0; i < omap_dmm->num_engines; i++) {
744 omap_dmm->engines[i].id = i;
745 omap_dmm->engines[i].dmm = omap_dmm;
746 omap_dmm->engines[i].refill_va = omap_dmm->refill_va +
747 (REFILL_BUFFER_SIZE * i);
748 omap_dmm->engines[i].refill_pa = omap_dmm->refill_pa +
749 (REFILL_BUFFER_SIZE * i);
750 init_completion(&omap_dmm->engines[i].compl);
751
752 list_add(&omap_dmm->engines[i].idle_node, &omap_dmm->idle_head);
753 }
754
755 omap_dmm->tcm = kcalloc(omap_dmm->num_lut, sizeof(*omap_dmm->tcm),
756 GFP_KERNEL);
757 if (!omap_dmm->tcm) {
758 ret = -ENOMEM;
759 goto fail;
760 }
761
762 /* init containers */
763 /* Each LUT is associated with a TCM (container manager). We use the
764 lut_id to denote the lut_id used to identify the correct LUT for
765 programming during reill operations */
766 for (i = 0; i < omap_dmm->num_lut; i++) {
767 omap_dmm->tcm[i] = sita_init(omap_dmm->container_width,
768 omap_dmm->container_height);
769
770 if (!omap_dmm->tcm[i]) {
771 dev_err(&dev->dev, "failed to allocate container\n");
772 ret = -ENOMEM;
773 goto fail;
774 }
775
776 omap_dmm->tcm[i]->lut_id = i;
777 }
778
779 /* assign access mode containers to applicable tcm container */
780 /* OMAP 4 has 1 container for all 4 views */
781 /* OMAP 5 has 2 containers, 1 for 2D and 1 for 1D */
782 containers[TILFMT_8BIT] = omap_dmm->tcm[0];
783 containers[TILFMT_16BIT] = omap_dmm->tcm[0];
784 containers[TILFMT_32BIT] = omap_dmm->tcm[0];
785
786 if (omap_dmm->container_height != omap_dmm->lut_height) {
787 /* second LUT is used for PAGE mode. Programming must use
788 y offset that is added to all y coordinates. LUT id is still
789 0, because it is the same LUT, just the upper 128 lines */
790 containers[TILFMT_PAGE] = omap_dmm->tcm[1];
791 omap_dmm->tcm[1]->y_offset = OMAP5_LUT_OFFSET;
792 omap_dmm->tcm[1]->lut_id = 0;
793 } else {
794 containers[TILFMT_PAGE] = omap_dmm->tcm[0];
795 }
796
797 area = (struct tcm_area) {
798 .tcm = NULL,
799 .p1.x = omap_dmm->container_width - 1,
800 .p1.y = omap_dmm->container_height - 1,
801 };
802
803 /* initialize all LUTs to dummy page entries */
804 for (i = 0; i < omap_dmm->num_lut; i++) {
805 area.tcm = omap_dmm->tcm[i];
806 if (fill(&area, NULL, 0, 0, true))
807 dev_err(omap_dmm->dev, "refill failed");
808 }
809
810 dev_info(omap_dmm->dev, "initialized all PAT entries\n");
811
812 return 0;
813
814fail:
815 if (omap_dmm_remove(dev))
816 dev_err(&dev->dev, "cleanup failed\n");
817 return ret;
818}
819
820/*
821 * debugfs support
822 */
823
824#ifdef CONFIG_DEBUG_FS
825
826static const char *alphabet = "abcdefghijklmnopqrstuvwxyz"
827 "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
828static const char *special = ".,:;'\"`~!^-+";
829
830static void fill_map(char **map, int xdiv, int ydiv, struct tcm_area *a,
831 char c, bool ovw)
832{
833 int x, y;
834 for (y = a->p0.y / ydiv; y <= a->p1.y / ydiv; y++)
835 for (x = a->p0.x / xdiv; x <= a->p1.x / xdiv; x++)
836 if (map[y][x] == ' ' || ovw)
837 map[y][x] = c;
838}
839
840static void fill_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p,
841 char c)
842{
843 map[p->y / ydiv][p->x / xdiv] = c;
844}
845
846static char read_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p)
847{
848 return map[p->y / ydiv][p->x / xdiv];
849}
850
851static int map_width(int xdiv, int x0, int x1)
852{
853 return (x1 / xdiv) - (x0 / xdiv) + 1;
854}
855
856static void text_map(char **map, int xdiv, char *nice, int yd, int x0, int x1)
857{
858 char *p = map[yd] + (x0 / xdiv);
859 int w = (map_width(xdiv, x0, x1) - strlen(nice)) / 2;
860 if (w >= 0) {
861 p += w;
862 while (*nice)
863 *p++ = *nice++;
864 }
865}
866
867static void map_1d_info(char **map, int xdiv, int ydiv, char *nice,
868 struct tcm_area *a)
869{
870 sprintf(nice, "%dK", tcm_sizeof(*a) * 4);
871 if (a->p0.y + 1 < a->p1.y) {
872 text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, 0,
873 256 - 1);
874 } else if (a->p0.y < a->p1.y) {
875 if (strlen(nice) < map_width(xdiv, a->p0.x, 256 - 1))
876 text_map(map, xdiv, nice, a->p0.y / ydiv,
877 a->p0.x + xdiv, 256 - 1);
878 else if (strlen(nice) < map_width(xdiv, 0, a->p1.x))
879 text_map(map, xdiv, nice, a->p1.y / ydiv,
880 0, a->p1.y - xdiv);
881 } else if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) {
882 text_map(map, xdiv, nice, a->p0.y / ydiv, a->p0.x, a->p1.x);
883 }
884}
885
886static void map_2d_info(char **map, int xdiv, int ydiv, char *nice,
887 struct tcm_area *a)
888{
889 sprintf(nice, "(%d*%d)", tcm_awidth(*a), tcm_aheight(*a));
890 if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x))
891 text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv,
892 a->p0.x, a->p1.x);
893}
894
895int tiler_map_show(struct seq_file *s, void *arg)
896{
897 int xdiv = 2, ydiv = 1;
898 char **map = NULL, *global_map;
899 struct tiler_block *block;
900 struct tcm_area a, p;
901 int i;
902 const char *m2d = alphabet;
903 const char *a2d = special;
904 const char *m2dp = m2d, *a2dp = a2d;
905 char nice[128];
906 int h_adj;
907 int w_adj;
908 unsigned long flags;
909 int lut_idx;
910
911
912 if (!omap_dmm) {
913 /* early return if dmm/tiler device is not initialized */
914 return 0;
915 }
916
917 h_adj = omap_dmm->container_height / ydiv;
918 w_adj = omap_dmm->container_width / xdiv;
919
920 map = kmalloc(h_adj * sizeof(*map), GFP_KERNEL);
921 global_map = kmalloc((w_adj + 1) * h_adj, GFP_KERNEL);
922
923 if (!map || !global_map)
924 goto error;
925
926 for (lut_idx = 0; lut_idx < omap_dmm->num_lut; lut_idx++) {
927 memset(map, 0, h_adj * sizeof(*map));
928 memset(global_map, ' ', (w_adj + 1) * h_adj);
929
930 for (i = 0; i < omap_dmm->container_height; i++) {
931 map[i] = global_map + i * (w_adj + 1);
932 map[i][w_adj] = 0;
933 }
934
935 spin_lock_irqsave(&list_lock, flags);
936
937 list_for_each_entry(block, &omap_dmm->alloc_head, alloc_node) {
938 if (block->area.tcm == omap_dmm->tcm[lut_idx]) {
939 if (block->fmt != TILFMT_PAGE) {
940 fill_map(map, xdiv, ydiv, &block->area,
941 *m2dp, true);
942 if (!*++a2dp)
943 a2dp = a2d;
944 if (!*++m2dp)
945 m2dp = m2d;
946 map_2d_info(map, xdiv, ydiv, nice,
947 &block->area);
948 } else {
949 bool start = read_map_pt(map, xdiv,
950 ydiv, &block->area.p0) == ' ';
951 bool end = read_map_pt(map, xdiv, ydiv,
952 &block->area.p1) == ' ';
953
954 tcm_for_each_slice(a, block->area, p)
955 fill_map(map, xdiv, ydiv, &a,
956 '=', true);
957 fill_map_pt(map, xdiv, ydiv,
958 &block->area.p0,
959 start ? '<' : 'X');
960 fill_map_pt(map, xdiv, ydiv,
961 &block->area.p1,
962 end ? '>' : 'X');
963 map_1d_info(map, xdiv, ydiv, nice,
964 &block->area);
965 }
966 }
967 }
968
969 spin_unlock_irqrestore(&list_lock, flags);
970
971 if (s) {
972 seq_printf(s, "CONTAINER %d DUMP BEGIN\n", lut_idx);
973 for (i = 0; i < 128; i++)
974 seq_printf(s, "%03d:%s\n", i, map[i]);
975 seq_printf(s, "CONTAINER %d DUMP END\n", lut_idx);
976 } else {
977 dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP BEGIN\n",
978 lut_idx);
979 for (i = 0; i < 128; i++)
980 dev_dbg(omap_dmm->dev, "%03d:%s\n", i, map[i]);
981 dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP END\n",
982 lut_idx);
983 }
984 }
985
986error:
987 kfree(map);
988 kfree(global_map);
989
990 return 0;
991}
992#endif
993
994#ifdef CONFIG_PM_SLEEP
995static int omap_dmm_resume(struct device *dev)
996{
997 struct tcm_area area;
998 int i;
999
1000 if (!omap_dmm)
1001 return -ENODEV;
1002
1003 area = (struct tcm_area) {
1004 .tcm = NULL,
1005 .p1.x = omap_dmm->container_width - 1,
1006 .p1.y = omap_dmm->container_height - 1,
1007 };
1008
1009 /* initialize all LUTs to dummy page entries */
1010 for (i = 0; i < omap_dmm->num_lut; i++) {
1011 area.tcm = omap_dmm->tcm[i];
1012 if (fill(&area, NULL, 0, 0, true))
1013 dev_err(dev, "refill failed");
1014 }
1015
1016 return 0;
1017}
1018#endif
1019
1020static SIMPLE_DEV_PM_OPS(omap_dmm_pm_ops, NULL, omap_dmm_resume);
1021
1022#if defined(CONFIG_OF)
1023static const struct dmm_platform_data dmm_omap4_platform_data = {
1024 .cpu_cache_flags = OMAP_BO_WC,
1025};
1026
1027static const struct dmm_platform_data dmm_omap5_platform_data = {
1028 .cpu_cache_flags = OMAP_BO_UNCACHED,
1029};
1030
1031static const struct of_device_id dmm_of_match[] = {
1032 {
1033 .compatible = "ti,omap4-dmm",
1034 .data = &dmm_omap4_platform_data,
1035 },
1036 {
1037 .compatible = "ti,omap5-dmm",
1038 .data = &dmm_omap5_platform_data,
1039 },
1040 {},
1041};
1042#endif
1043
1044struct platform_driver omap_dmm_driver = {
1045 .probe = omap_dmm_probe,
1046 .remove = omap_dmm_remove,
1047 .driver = {
1048 .owner = THIS_MODULE,
1049 .name = DMM_DRIVER_NAME,
1050 .of_match_table = of_match_ptr(dmm_of_match),
1051 .pm = &omap_dmm_pm_ops,
1052 },
1053};
1054
1055MODULE_LICENSE("GPL v2");
1056MODULE_AUTHOR("Andy Gross <andy.gross@ti.com>");
1057MODULE_DESCRIPTION("OMAP DMM/Tiler Driver");
1/*
2 * DMM IOMMU driver support functions for TI OMAP processors.
3 *
4 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
5 * Author: Rob Clark <rob@ti.com>
6 * Andy Gross <andy.gross@ti.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation version 2.
11 *
12 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
13 * kind, whether express or implied; without even the implied warranty
14 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 */
17
18#include <linux/completion.h>
19#include <linux/delay.h>
20#include <linux/dma-mapping.h>
21#include <linux/dmaengine.h>
22#include <linux/errno.h>
23#include <linux/init.h>
24#include <linux/interrupt.h>
25#include <linux/list.h>
26#include <linux/mm.h>
27#include <linux/module.h>
28#include <linux/platform_device.h> /* platform_device() */
29#include <linux/sched.h>
30#include <linux/seq_file.h>
31#include <linux/slab.h>
32#include <linux/time.h>
33#include <linux/vmalloc.h>
34#include <linux/wait.h>
35
36#include "omap_dmm_tiler.h"
37#include "omap_dmm_priv.h"
38
39#define DMM_DRIVER_NAME "dmm"
40
41/* mappings for associating views to luts */
42static struct tcm *containers[TILFMT_NFORMATS];
43static struct dmm *omap_dmm;
44
45#if defined(CONFIG_OF)
46static const struct of_device_id dmm_of_match[];
47#endif
48
49/* global spinlock for protecting lists */
50static DEFINE_SPINLOCK(list_lock);
51
52/* Geometry table */
53#define GEOM(xshift, yshift, bytes_per_pixel) { \
54 .x_shft = (xshift), \
55 .y_shft = (yshift), \
56 .cpp = (bytes_per_pixel), \
57 .slot_w = 1 << (SLOT_WIDTH_BITS - (xshift)), \
58 .slot_h = 1 << (SLOT_HEIGHT_BITS - (yshift)), \
59 }
60
61static const struct {
62 u32 x_shft; /* unused X-bits (as part of bpp) */
63 u32 y_shft; /* unused Y-bits (as part of bpp) */
64 u32 cpp; /* bytes/chars per pixel */
65 u32 slot_w; /* width of each slot (in pixels) */
66 u32 slot_h; /* height of each slot (in pixels) */
67} geom[TILFMT_NFORMATS] = {
68 [TILFMT_8BIT] = GEOM(0, 0, 1),
69 [TILFMT_16BIT] = GEOM(0, 1, 2),
70 [TILFMT_32BIT] = GEOM(1, 1, 4),
71 [TILFMT_PAGE] = GEOM(SLOT_WIDTH_BITS, SLOT_HEIGHT_BITS, 1),
72};
73
74
75/* lookup table for registers w/ per-engine instances */
76static const u32 reg[][4] = {
77 [PAT_STATUS] = {DMM_PAT_STATUS__0, DMM_PAT_STATUS__1,
78 DMM_PAT_STATUS__2, DMM_PAT_STATUS__3},
79 [PAT_DESCR] = {DMM_PAT_DESCR__0, DMM_PAT_DESCR__1,
80 DMM_PAT_DESCR__2, DMM_PAT_DESCR__3},
81};
82
83static int dmm_dma_copy(struct dmm *dmm, dma_addr_t src, dma_addr_t dst)
84{
85 struct dma_async_tx_descriptor *tx;
86 enum dma_status status;
87 dma_cookie_t cookie;
88
89 tx = dmaengine_prep_dma_memcpy(dmm->wa_dma_chan, dst, src, 4, 0);
90 if (!tx) {
91 dev_err(dmm->dev, "Failed to prepare DMA memcpy\n");
92 return -EIO;
93 }
94
95 cookie = tx->tx_submit(tx);
96 if (dma_submit_error(cookie)) {
97 dev_err(dmm->dev, "Failed to do DMA tx_submit\n");
98 return -EIO;
99 }
100
101 status = dma_sync_wait(dmm->wa_dma_chan, cookie);
102 if (status != DMA_COMPLETE)
103 dev_err(dmm->dev, "i878 wa DMA copy failure\n");
104
105 dmaengine_terminate_all(dmm->wa_dma_chan);
106 return 0;
107}
108
109static u32 dmm_read_wa(struct dmm *dmm, u32 reg)
110{
111 dma_addr_t src, dst;
112 int r;
113
114 src = dmm->phys_base + reg;
115 dst = dmm->wa_dma_handle;
116
117 r = dmm_dma_copy(dmm, src, dst);
118 if (r) {
119 dev_err(dmm->dev, "sDMA read transfer timeout\n");
120 return readl(dmm->base + reg);
121 }
122
123 /*
124 * As per i878 workaround, the DMA is used to access the DMM registers.
125 * Make sure that the readl is not moved by the compiler or the CPU
126 * earlier than the DMA finished writing the value to memory.
127 */
128 rmb();
129 return readl(dmm->wa_dma_data);
130}
131
132static void dmm_write_wa(struct dmm *dmm, u32 val, u32 reg)
133{
134 dma_addr_t src, dst;
135 int r;
136
137 writel(val, dmm->wa_dma_data);
138 /*
139 * As per i878 workaround, the DMA is used to access the DMM registers.
140 * Make sure that the writel is not moved by the compiler or the CPU, so
141 * the data will be in place before we start the DMA to do the actual
142 * register write.
143 */
144 wmb();
145
146 src = dmm->wa_dma_handle;
147 dst = dmm->phys_base + reg;
148
149 r = dmm_dma_copy(dmm, src, dst);
150 if (r) {
151 dev_err(dmm->dev, "sDMA write transfer timeout\n");
152 writel(val, dmm->base + reg);
153 }
154}
155
156static u32 dmm_read(struct dmm *dmm, u32 reg)
157{
158 if (dmm->dmm_workaround) {
159 u32 v;
160 unsigned long flags;
161
162 spin_lock_irqsave(&dmm->wa_lock, flags);
163 v = dmm_read_wa(dmm, reg);
164 spin_unlock_irqrestore(&dmm->wa_lock, flags);
165
166 return v;
167 } else {
168 return readl(dmm->base + reg);
169 }
170}
171
172static void dmm_write(struct dmm *dmm, u32 val, u32 reg)
173{
174 if (dmm->dmm_workaround) {
175 unsigned long flags;
176
177 spin_lock_irqsave(&dmm->wa_lock, flags);
178 dmm_write_wa(dmm, val, reg);
179 spin_unlock_irqrestore(&dmm->wa_lock, flags);
180 } else {
181 writel(val, dmm->base + reg);
182 }
183}
184
185static int dmm_workaround_init(struct dmm *dmm)
186{
187 dma_cap_mask_t mask;
188
189 spin_lock_init(&dmm->wa_lock);
190
191 dmm->wa_dma_data = dma_alloc_coherent(dmm->dev, sizeof(u32),
192 &dmm->wa_dma_handle, GFP_KERNEL);
193 if (!dmm->wa_dma_data)
194 return -ENOMEM;
195
196 dma_cap_zero(mask);
197 dma_cap_set(DMA_MEMCPY, mask);
198
199 dmm->wa_dma_chan = dma_request_channel(mask, NULL, NULL);
200 if (!dmm->wa_dma_chan) {
201 dma_free_coherent(dmm->dev, 4, dmm->wa_dma_data, dmm->wa_dma_handle);
202 return -ENODEV;
203 }
204
205 return 0;
206}
207
208static void dmm_workaround_uninit(struct dmm *dmm)
209{
210 dma_release_channel(dmm->wa_dma_chan);
211
212 dma_free_coherent(dmm->dev, 4, dmm->wa_dma_data, dmm->wa_dma_handle);
213}
214
215/* simple allocator to grab next 16 byte aligned memory from txn */
216static void *alloc_dma(struct dmm_txn *txn, size_t sz, dma_addr_t *pa)
217{
218 void *ptr;
219 struct refill_engine *engine = txn->engine_handle;
220
221 /* dmm programming requires 16 byte aligned addresses */
222 txn->current_pa = round_up(txn->current_pa, 16);
223 txn->current_va = (void *)round_up((long)txn->current_va, 16);
224
225 ptr = txn->current_va;
226 *pa = txn->current_pa;
227
228 txn->current_pa += sz;
229 txn->current_va += sz;
230
231 BUG_ON((txn->current_va - engine->refill_va) > REFILL_BUFFER_SIZE);
232
233 return ptr;
234}
235
236/* check status and spin until wait_mask comes true */
237static int wait_status(struct refill_engine *engine, u32 wait_mask)
238{
239 struct dmm *dmm = engine->dmm;
240 u32 r = 0, err, i;
241
242 i = DMM_FIXED_RETRY_COUNT;
243 while (true) {
244 r = dmm_read(dmm, reg[PAT_STATUS][engine->id]);
245 err = r & DMM_PATSTATUS_ERR;
246 if (err) {
247 dev_err(dmm->dev,
248 "%s: error (engine%d). PAT_STATUS: 0x%08x\n",
249 __func__, engine->id, r);
250 return -EFAULT;
251 }
252
253 if ((r & wait_mask) == wait_mask)
254 break;
255
256 if (--i == 0) {
257 dev_err(dmm->dev,
258 "%s: timeout (engine%d). PAT_STATUS: 0x%08x\n",
259 __func__, engine->id, r);
260 return -ETIMEDOUT;
261 }
262
263 udelay(1);
264 }
265
266 return 0;
267}
268
269static void release_engine(struct refill_engine *engine)
270{
271 unsigned long flags;
272
273 spin_lock_irqsave(&list_lock, flags);
274 list_add(&engine->idle_node, &omap_dmm->idle_head);
275 spin_unlock_irqrestore(&list_lock, flags);
276
277 atomic_inc(&omap_dmm->engine_counter);
278 wake_up_interruptible(&omap_dmm->engine_queue);
279}
280
281static irqreturn_t omap_dmm_irq_handler(int irq, void *arg)
282{
283 struct dmm *dmm = arg;
284 u32 status = dmm_read(dmm, DMM_PAT_IRQSTATUS);
285 int i;
286
287 /* ack IRQ */
288 dmm_write(dmm, status, DMM_PAT_IRQSTATUS);
289
290 for (i = 0; i < dmm->num_engines; i++) {
291 if (status & DMM_IRQSTAT_ERR_MASK)
292 dev_err(dmm->dev,
293 "irq error(engine%d): IRQSTAT 0x%02x\n",
294 i, status & 0xff);
295
296 if (status & DMM_IRQSTAT_LST) {
297 if (dmm->engines[i].async)
298 release_engine(&dmm->engines[i]);
299
300 complete(&dmm->engines[i].compl);
301 }
302
303 status >>= 8;
304 }
305
306 return IRQ_HANDLED;
307}
308
309/**
310 * Get a handle for a DMM transaction
311 */
312static struct dmm_txn *dmm_txn_init(struct dmm *dmm, struct tcm *tcm)
313{
314 struct dmm_txn *txn = NULL;
315 struct refill_engine *engine = NULL;
316 int ret;
317 unsigned long flags;
318
319
320 /* wait until an engine is available */
321 ret = wait_event_interruptible(omap_dmm->engine_queue,
322 atomic_add_unless(&omap_dmm->engine_counter, -1, 0));
323 if (ret)
324 return ERR_PTR(ret);
325
326 /* grab an idle engine */
327 spin_lock_irqsave(&list_lock, flags);
328 if (!list_empty(&dmm->idle_head)) {
329 engine = list_entry(dmm->idle_head.next, struct refill_engine,
330 idle_node);
331 list_del(&engine->idle_node);
332 }
333 spin_unlock_irqrestore(&list_lock, flags);
334
335 BUG_ON(!engine);
336
337 txn = &engine->txn;
338 engine->tcm = tcm;
339 txn->engine_handle = engine;
340 txn->last_pat = NULL;
341 txn->current_va = engine->refill_va;
342 txn->current_pa = engine->refill_pa;
343
344 return txn;
345}
346
347/**
348 * Add region to DMM transaction. If pages or pages[i] is NULL, then the
349 * corresponding slot is cleared (ie. dummy_pa is programmed)
350 */
351static void dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
352 struct page **pages, u32 npages, u32 roll)
353{
354 dma_addr_t pat_pa = 0, data_pa = 0;
355 u32 *data;
356 struct pat *pat;
357 struct refill_engine *engine = txn->engine_handle;
358 int columns = (1 + area->x1 - area->x0);
359 int rows = (1 + area->y1 - area->y0);
360 int i = columns*rows;
361
362 pat = alloc_dma(txn, sizeof(*pat), &pat_pa);
363
364 if (txn->last_pat)
365 txn->last_pat->next_pa = (u32)pat_pa;
366
367 pat->area = *area;
368
369 /* adjust Y coordinates based off of container parameters */
370 pat->area.y0 += engine->tcm->y_offset;
371 pat->area.y1 += engine->tcm->y_offset;
372
373 pat->ctrl = (struct pat_ctrl){
374 .start = 1,
375 .lut_id = engine->tcm->lut_id,
376 };
377
378 data = alloc_dma(txn, 4*i, &data_pa);
379 /* FIXME: what if data_pa is more than 32-bit ? */
380 pat->data_pa = data_pa;
381
382 while (i--) {
383 int n = i + roll;
384 if (n >= npages)
385 n -= npages;
386 data[i] = (pages && pages[n]) ?
387 page_to_phys(pages[n]) : engine->dmm->dummy_pa;
388 }
389
390 txn->last_pat = pat;
391
392 return;
393}
394
395/**
396 * Commit the DMM transaction.
397 */
398static int dmm_txn_commit(struct dmm_txn *txn, bool wait)
399{
400 int ret = 0;
401 struct refill_engine *engine = txn->engine_handle;
402 struct dmm *dmm = engine->dmm;
403
404 if (!txn->last_pat) {
405 dev_err(engine->dmm->dev, "need at least one txn\n");
406 ret = -EINVAL;
407 goto cleanup;
408 }
409
410 txn->last_pat->next_pa = 0;
411 /* ensure that the written descriptors are visible to DMM */
412 wmb();
413
414 /*
415 * NOTE: the wmb() above should be enough, but there seems to be a bug
416 * in OMAP's memory barrier implementation, which in some rare cases may
417 * cause the writes not to be observable after wmb().
418 */
419
420 /* read back to ensure the data is in RAM */
421 readl(&txn->last_pat->next_pa);
422
423 /* write to PAT_DESCR to clear out any pending transaction */
424 dmm_write(dmm, 0x0, reg[PAT_DESCR][engine->id]);
425
426 /* wait for engine ready: */
427 ret = wait_status(engine, DMM_PATSTATUS_READY);
428 if (ret) {
429 ret = -EFAULT;
430 goto cleanup;
431 }
432
433 /* mark whether it is async to denote list management in IRQ handler */
434 engine->async = wait ? false : true;
435 reinit_completion(&engine->compl);
436 /* verify that the irq handler sees the 'async' and completion value */
437 smp_mb();
438
439 /* kick reload */
440 dmm_write(dmm, engine->refill_pa, reg[PAT_DESCR][engine->id]);
441
442 if (wait) {
443 if (!wait_for_completion_timeout(&engine->compl,
444 msecs_to_jiffies(100))) {
445 dev_err(dmm->dev, "timed out waiting for done\n");
446 ret = -ETIMEDOUT;
447 goto cleanup;
448 }
449
450 /* Check the engine status before continue */
451 ret = wait_status(engine, DMM_PATSTATUS_READY |
452 DMM_PATSTATUS_VALID | DMM_PATSTATUS_DONE);
453 }
454
455cleanup:
456 /* only place engine back on list if we are done with it */
457 if (ret || wait)
458 release_engine(engine);
459
460 return ret;
461}
462
463/*
464 * DMM programming
465 */
466static int fill(struct tcm_area *area, struct page **pages,
467 u32 npages, u32 roll, bool wait)
468{
469 int ret = 0;
470 struct tcm_area slice, area_s;
471 struct dmm_txn *txn;
472
473 /*
474 * FIXME
475 *
476 * Asynchronous fill does not work reliably, as the driver does not
477 * handle errors in the async code paths. The fill operation may
478 * silently fail, leading to leaking DMM engines, which may eventually
479 * lead to deadlock if we run out of DMM engines.
480 *
481 * For now, always set 'wait' so that we only use sync fills. Async
482 * fills should be fixed, or alternatively we could decide to only
483 * support sync fills and so the whole async code path could be removed.
484 */
485
486 wait = true;
487
488 txn = dmm_txn_init(omap_dmm, area->tcm);
489 if (IS_ERR_OR_NULL(txn))
490 return -ENOMEM;
491
492 tcm_for_each_slice(slice, *area, area_s) {
493 struct pat_area p_area = {
494 .x0 = slice.p0.x, .y0 = slice.p0.y,
495 .x1 = slice.p1.x, .y1 = slice.p1.y,
496 };
497
498 dmm_txn_append(txn, &p_area, pages, npages, roll);
499
500 roll += tcm_sizeof(slice);
501 }
502
503 ret = dmm_txn_commit(txn, wait);
504
505 return ret;
506}
507
508/*
509 * Pin/unpin
510 */
511
512/* note: slots for which pages[i] == NULL are filled w/ dummy page
513 */
514int tiler_pin(struct tiler_block *block, struct page **pages,
515 u32 npages, u32 roll, bool wait)
516{
517 int ret;
518
519 ret = fill(&block->area, pages, npages, roll, wait);
520
521 if (ret)
522 tiler_unpin(block);
523
524 return ret;
525}
526
527int tiler_unpin(struct tiler_block *block)
528{
529 return fill(&block->area, NULL, 0, 0, false);
530}
531
532/*
533 * Reserve/release
534 */
535struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, u16 w,
536 u16 h, u16 align)
537{
538 struct tiler_block *block;
539 u32 min_align = 128;
540 int ret;
541 unsigned long flags;
542 u32 slot_bytes;
543
544 block = kzalloc(sizeof(*block), GFP_KERNEL);
545 if (!block)
546 return ERR_PTR(-ENOMEM);
547
548 BUG_ON(!validfmt(fmt));
549
550 /* convert width/height to slots */
551 w = DIV_ROUND_UP(w, geom[fmt].slot_w);
552 h = DIV_ROUND_UP(h, geom[fmt].slot_h);
553
554 /* convert alignment to slots */
555 slot_bytes = geom[fmt].slot_w * geom[fmt].cpp;
556 min_align = max(min_align, slot_bytes);
557 align = (align > min_align) ? ALIGN(align, min_align) : min_align;
558 align /= slot_bytes;
559
560 block->fmt = fmt;
561
562 ret = tcm_reserve_2d(containers[fmt], w, h, align, -1, slot_bytes,
563 &block->area);
564 if (ret) {
565 kfree(block);
566 return ERR_PTR(-ENOMEM);
567 }
568
569 /* add to allocation list */
570 spin_lock_irqsave(&list_lock, flags);
571 list_add(&block->alloc_node, &omap_dmm->alloc_head);
572 spin_unlock_irqrestore(&list_lock, flags);
573
574 return block;
575}
576
577struct tiler_block *tiler_reserve_1d(size_t size)
578{
579 struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
580 int num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
581 unsigned long flags;
582
583 if (!block)
584 return ERR_PTR(-ENOMEM);
585
586 block->fmt = TILFMT_PAGE;
587
588 if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages,
589 &block->area)) {
590 kfree(block);
591 return ERR_PTR(-ENOMEM);
592 }
593
594 spin_lock_irqsave(&list_lock, flags);
595 list_add(&block->alloc_node, &omap_dmm->alloc_head);
596 spin_unlock_irqrestore(&list_lock, flags);
597
598 return block;
599}
600
601/* note: if you have pin'd pages, you should have already unpin'd first! */
602int tiler_release(struct tiler_block *block)
603{
604 int ret = tcm_free(&block->area);
605 unsigned long flags;
606
607 if (block->area.tcm)
608 dev_err(omap_dmm->dev, "failed to release block\n");
609
610 spin_lock_irqsave(&list_lock, flags);
611 list_del(&block->alloc_node);
612 spin_unlock_irqrestore(&list_lock, flags);
613
614 kfree(block);
615 return ret;
616}
617
618/*
619 * Utils
620 */
621
622/* calculate the tiler space address of a pixel in a view orientation...
623 * below description copied from the display subsystem section of TRM:
624 *
625 * When the TILER is addressed, the bits:
626 * [28:27] = 0x0 for 8-bit tiled
627 * 0x1 for 16-bit tiled
628 * 0x2 for 32-bit tiled
629 * 0x3 for page mode
630 * [31:29] = 0x0 for 0-degree view
631 * 0x1 for 180-degree view + mirroring
632 * 0x2 for 0-degree view + mirroring
633 * 0x3 for 180-degree view
634 * 0x4 for 270-degree view + mirroring
635 * 0x5 for 270-degree view
636 * 0x6 for 90-degree view
637 * 0x7 for 90-degree view + mirroring
638 * Otherwise the bits indicated the corresponding bit address to access
639 * the SDRAM.
640 */
641static u32 tiler_get_address(enum tiler_fmt fmt, u32 orient, u32 x, u32 y)
642{
643 u32 x_bits, y_bits, tmp, x_mask, y_mask, alignment;
644
645 x_bits = CONT_WIDTH_BITS - geom[fmt].x_shft;
646 y_bits = CONT_HEIGHT_BITS - geom[fmt].y_shft;
647 alignment = geom[fmt].x_shft + geom[fmt].y_shft;
648
649 /* validate coordinate */
650 x_mask = MASK(x_bits);
651 y_mask = MASK(y_bits);
652
653 if (x < 0 || x > x_mask || y < 0 || y > y_mask) {
654 DBG("invalid coords: %u < 0 || %u > %u || %u < 0 || %u > %u",
655 x, x, x_mask, y, y, y_mask);
656 return 0;
657 }
658
659 /* account for mirroring */
660 if (orient & MASK_X_INVERT)
661 x ^= x_mask;
662 if (orient & MASK_Y_INVERT)
663 y ^= y_mask;
664
665 /* get coordinate address */
666 if (orient & MASK_XY_FLIP)
667 tmp = ((x << y_bits) + y);
668 else
669 tmp = ((y << x_bits) + x);
670
671 return TIL_ADDR((tmp << alignment), orient, fmt);
672}
673
674dma_addr_t tiler_ssptr(struct tiler_block *block)
675{
676 BUG_ON(!validfmt(block->fmt));
677
678 return TILVIEW_8BIT + tiler_get_address(block->fmt, 0,
679 block->area.p0.x * geom[block->fmt].slot_w,
680 block->area.p0.y * geom[block->fmt].slot_h);
681}
682
683dma_addr_t tiler_tsptr(struct tiler_block *block, u32 orient,
684 u32 x, u32 y)
685{
686 struct tcm_pt *p = &block->area.p0;
687 BUG_ON(!validfmt(block->fmt));
688
689 return tiler_get_address(block->fmt, orient,
690 (p->x * geom[block->fmt].slot_w) + x,
691 (p->y * geom[block->fmt].slot_h) + y);
692}
693
694void tiler_align(enum tiler_fmt fmt, u16 *w, u16 *h)
695{
696 BUG_ON(!validfmt(fmt));
697 *w = round_up(*w, geom[fmt].slot_w);
698 *h = round_up(*h, geom[fmt].slot_h);
699}
700
701u32 tiler_stride(enum tiler_fmt fmt, u32 orient)
702{
703 BUG_ON(!validfmt(fmt));
704
705 if (orient & MASK_XY_FLIP)
706 return 1 << (CONT_HEIGHT_BITS + geom[fmt].x_shft);
707 else
708 return 1 << (CONT_WIDTH_BITS + geom[fmt].y_shft);
709}
710
711size_t tiler_size(enum tiler_fmt fmt, u16 w, u16 h)
712{
713 tiler_align(fmt, &w, &h);
714 return geom[fmt].cpp * w * h;
715}
716
717size_t tiler_vsize(enum tiler_fmt fmt, u16 w, u16 h)
718{
719 BUG_ON(!validfmt(fmt));
720 return round_up(geom[fmt].cpp * w, PAGE_SIZE) * h;
721}
722
723u32 tiler_get_cpu_cache_flags(void)
724{
725 return omap_dmm->plat_data->cpu_cache_flags;
726}
727
728bool dmm_is_available(void)
729{
730 return omap_dmm ? true : false;
731}
732
733static int omap_dmm_remove(struct platform_device *dev)
734{
735 struct tiler_block *block, *_block;
736 int i;
737 unsigned long flags;
738
739 if (omap_dmm) {
740 /* Disable all enabled interrupts */
741 dmm_write(omap_dmm, 0x7e7e7e7e, DMM_PAT_IRQENABLE_CLR);
742 free_irq(omap_dmm->irq, omap_dmm);
743
744 /* free all area regions */
745 spin_lock_irqsave(&list_lock, flags);
746 list_for_each_entry_safe(block, _block, &omap_dmm->alloc_head,
747 alloc_node) {
748 list_del(&block->alloc_node);
749 kfree(block);
750 }
751 spin_unlock_irqrestore(&list_lock, flags);
752
753 for (i = 0; i < omap_dmm->num_lut; i++)
754 if (omap_dmm->tcm && omap_dmm->tcm[i])
755 omap_dmm->tcm[i]->deinit(omap_dmm->tcm[i]);
756 kfree(omap_dmm->tcm);
757
758 kfree(omap_dmm->engines);
759 if (omap_dmm->refill_va)
760 dma_free_wc(omap_dmm->dev,
761 REFILL_BUFFER_SIZE * omap_dmm->num_engines,
762 omap_dmm->refill_va, omap_dmm->refill_pa);
763 if (omap_dmm->dummy_page)
764 __free_page(omap_dmm->dummy_page);
765
766 if (omap_dmm->dmm_workaround)
767 dmm_workaround_uninit(omap_dmm);
768
769 iounmap(omap_dmm->base);
770 kfree(omap_dmm);
771 omap_dmm = NULL;
772 }
773
774 return 0;
775}
776
777static int omap_dmm_probe(struct platform_device *dev)
778{
779 int ret = -EFAULT, i;
780 struct tcm_area area = {0};
781 u32 hwinfo, pat_geom;
782 struct resource *mem;
783
784 omap_dmm = kzalloc(sizeof(*omap_dmm), GFP_KERNEL);
785 if (!omap_dmm)
786 goto fail;
787
788 /* initialize lists */
789 INIT_LIST_HEAD(&omap_dmm->alloc_head);
790 INIT_LIST_HEAD(&omap_dmm->idle_head);
791
792 init_waitqueue_head(&omap_dmm->engine_queue);
793
794 if (dev->dev.of_node) {
795 const struct of_device_id *match;
796
797 match = of_match_node(dmm_of_match, dev->dev.of_node);
798 if (!match) {
799 dev_err(&dev->dev, "failed to find matching device node\n");
800 ret = -ENODEV;
801 goto fail;
802 }
803
804 omap_dmm->plat_data = match->data;
805 }
806
807 /* lookup hwmod data - base address and irq */
808 mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
809 if (!mem) {
810 dev_err(&dev->dev, "failed to get base address resource\n");
811 goto fail;
812 }
813
814 omap_dmm->phys_base = mem->start;
815 omap_dmm->base = ioremap(mem->start, SZ_2K);
816
817 if (!omap_dmm->base) {
818 dev_err(&dev->dev, "failed to get dmm base address\n");
819 goto fail;
820 }
821
822 omap_dmm->irq = platform_get_irq(dev, 0);
823 if (omap_dmm->irq < 0) {
824 dev_err(&dev->dev, "failed to get IRQ resource\n");
825 goto fail;
826 }
827
828 omap_dmm->dev = &dev->dev;
829
830 if (of_machine_is_compatible("ti,dra7")) {
831 /*
832 * DRA7 Errata i878 says that MPU should not be used to access
833 * RAM and DMM at the same time. As it's not possible to prevent
834 * MPU accessing RAM, we need to access DMM via a proxy.
835 */
836 if (!dmm_workaround_init(omap_dmm)) {
837 omap_dmm->dmm_workaround = true;
838 dev_info(&dev->dev,
839 "workaround for errata i878 in use\n");
840 } else {
841 dev_warn(&dev->dev,
842 "failed to initialize work-around for i878\n");
843 }
844 }
845
846 hwinfo = dmm_read(omap_dmm, DMM_PAT_HWINFO);
847 omap_dmm->num_engines = (hwinfo >> 24) & 0x1F;
848 omap_dmm->num_lut = (hwinfo >> 16) & 0x1F;
849 omap_dmm->container_width = 256;
850 omap_dmm->container_height = 128;
851
852 atomic_set(&omap_dmm->engine_counter, omap_dmm->num_engines);
853
854 /* read out actual LUT width and height */
855 pat_geom = dmm_read(omap_dmm, DMM_PAT_GEOMETRY);
856 omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5;
857 omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5;
858
859 /* increment LUT by one if on OMAP5 */
860 /* LUT has twice the height, and is split into a separate container */
861 if (omap_dmm->lut_height != omap_dmm->container_height)
862 omap_dmm->num_lut++;
863
864 /* initialize DMM registers */
865 dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__0);
866 dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__1);
867 dmm_write(omap_dmm, 0x80808080, DMM_PAT_VIEW_MAP__0);
868 dmm_write(omap_dmm, 0x80000000, DMM_PAT_VIEW_MAP_BASE);
869 dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__0);
870 dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__1);
871
872 omap_dmm->dummy_page = alloc_page(GFP_KERNEL | __GFP_DMA32);
873 if (!omap_dmm->dummy_page) {
874 dev_err(&dev->dev, "could not allocate dummy page\n");
875 ret = -ENOMEM;
876 goto fail;
877 }
878
879 /* set dma mask for device */
880 ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
881 if (ret)
882 goto fail;
883
884 omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page);
885
886 /* alloc refill memory */
887 omap_dmm->refill_va = dma_alloc_wc(&dev->dev,
888 REFILL_BUFFER_SIZE * omap_dmm->num_engines,
889 &omap_dmm->refill_pa, GFP_KERNEL);
890 if (!omap_dmm->refill_va) {
891 dev_err(&dev->dev, "could not allocate refill memory\n");
892 goto fail;
893 }
894
895 /* alloc engines */
896 omap_dmm->engines = kcalloc(omap_dmm->num_engines,
897 sizeof(*omap_dmm->engines), GFP_KERNEL);
898 if (!omap_dmm->engines) {
899 ret = -ENOMEM;
900 goto fail;
901 }
902
903 for (i = 0; i < omap_dmm->num_engines; i++) {
904 omap_dmm->engines[i].id = i;
905 omap_dmm->engines[i].dmm = omap_dmm;
906 omap_dmm->engines[i].refill_va = omap_dmm->refill_va +
907 (REFILL_BUFFER_SIZE * i);
908 omap_dmm->engines[i].refill_pa = omap_dmm->refill_pa +
909 (REFILL_BUFFER_SIZE * i);
910 init_completion(&omap_dmm->engines[i].compl);
911
912 list_add(&omap_dmm->engines[i].idle_node, &omap_dmm->idle_head);
913 }
914
915 omap_dmm->tcm = kcalloc(omap_dmm->num_lut, sizeof(*omap_dmm->tcm),
916 GFP_KERNEL);
917 if (!omap_dmm->tcm) {
918 ret = -ENOMEM;
919 goto fail;
920 }
921
922 /* init containers */
923 /* Each LUT is associated with a TCM (container manager). We use the
924 lut_id to denote the lut_id used to identify the correct LUT for
925 programming during reill operations */
926 for (i = 0; i < omap_dmm->num_lut; i++) {
927 omap_dmm->tcm[i] = sita_init(omap_dmm->container_width,
928 omap_dmm->container_height);
929
930 if (!omap_dmm->tcm[i]) {
931 dev_err(&dev->dev, "failed to allocate container\n");
932 ret = -ENOMEM;
933 goto fail;
934 }
935
936 omap_dmm->tcm[i]->lut_id = i;
937 }
938
939 /* assign access mode containers to applicable tcm container */
940 /* OMAP 4 has 1 container for all 4 views */
941 /* OMAP 5 has 2 containers, 1 for 2D and 1 for 1D */
942 containers[TILFMT_8BIT] = omap_dmm->tcm[0];
943 containers[TILFMT_16BIT] = omap_dmm->tcm[0];
944 containers[TILFMT_32BIT] = omap_dmm->tcm[0];
945
946 if (omap_dmm->container_height != omap_dmm->lut_height) {
947 /* second LUT is used for PAGE mode. Programming must use
948 y offset that is added to all y coordinates. LUT id is still
949 0, because it is the same LUT, just the upper 128 lines */
950 containers[TILFMT_PAGE] = omap_dmm->tcm[1];
951 omap_dmm->tcm[1]->y_offset = OMAP5_LUT_OFFSET;
952 omap_dmm->tcm[1]->lut_id = 0;
953 } else {
954 containers[TILFMT_PAGE] = omap_dmm->tcm[0];
955 }
956
957 area = (struct tcm_area) {
958 .tcm = NULL,
959 .p1.x = omap_dmm->container_width - 1,
960 .p1.y = omap_dmm->container_height - 1,
961 };
962
963 ret = request_irq(omap_dmm->irq, omap_dmm_irq_handler, IRQF_SHARED,
964 "omap_dmm_irq_handler", omap_dmm);
965
966 if (ret) {
967 dev_err(&dev->dev, "couldn't register IRQ %d, error %d\n",
968 omap_dmm->irq, ret);
969 omap_dmm->irq = -1;
970 goto fail;
971 }
972
973 /* Enable all interrupts for each refill engine except
974 * ERR_LUT_MISS<n> (which is just advisory, and we don't care
975 * about because we want to be able to refill live scanout
976 * buffers for accelerated pan/scroll) and FILL_DSC<n> which
977 * we just generally don't care about.
978 */
979 dmm_write(omap_dmm, 0x7e7e7e7e, DMM_PAT_IRQENABLE_SET);
980
981 /* initialize all LUTs to dummy page entries */
982 for (i = 0; i < omap_dmm->num_lut; i++) {
983 area.tcm = omap_dmm->tcm[i];
984 if (fill(&area, NULL, 0, 0, true))
985 dev_err(omap_dmm->dev, "refill failed");
986 }
987
988 dev_info(omap_dmm->dev, "initialized all PAT entries\n");
989
990 return 0;
991
992fail:
993 if (omap_dmm_remove(dev))
994 dev_err(&dev->dev, "cleanup failed\n");
995 return ret;
996}
997
998/*
999 * debugfs support
1000 */
1001
1002#ifdef CONFIG_DEBUG_FS
1003
1004static const char *alphabet = "abcdefghijklmnopqrstuvwxyz"
1005 "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
1006static const char *special = ".,:;'\"`~!^-+";
1007
1008static void fill_map(char **map, int xdiv, int ydiv, struct tcm_area *a,
1009 char c, bool ovw)
1010{
1011 int x, y;
1012 for (y = a->p0.y / ydiv; y <= a->p1.y / ydiv; y++)
1013 for (x = a->p0.x / xdiv; x <= a->p1.x / xdiv; x++)
1014 if (map[y][x] == ' ' || ovw)
1015 map[y][x] = c;
1016}
1017
1018static void fill_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p,
1019 char c)
1020{
1021 map[p->y / ydiv][p->x / xdiv] = c;
1022}
1023
1024static char read_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p)
1025{
1026 return map[p->y / ydiv][p->x / xdiv];
1027}
1028
1029static int map_width(int xdiv, int x0, int x1)
1030{
1031 return (x1 / xdiv) - (x0 / xdiv) + 1;
1032}
1033
1034static void text_map(char **map, int xdiv, char *nice, int yd, int x0, int x1)
1035{
1036 char *p = map[yd] + (x0 / xdiv);
1037 int w = (map_width(xdiv, x0, x1) - strlen(nice)) / 2;
1038 if (w >= 0) {
1039 p += w;
1040 while (*nice)
1041 *p++ = *nice++;
1042 }
1043}
1044
1045static void map_1d_info(char **map, int xdiv, int ydiv, char *nice,
1046 struct tcm_area *a)
1047{
1048 sprintf(nice, "%dK", tcm_sizeof(*a) * 4);
1049 if (a->p0.y + 1 < a->p1.y) {
1050 text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, 0,
1051 256 - 1);
1052 } else if (a->p0.y < a->p1.y) {
1053 if (strlen(nice) < map_width(xdiv, a->p0.x, 256 - 1))
1054 text_map(map, xdiv, nice, a->p0.y / ydiv,
1055 a->p0.x + xdiv, 256 - 1);
1056 else if (strlen(nice) < map_width(xdiv, 0, a->p1.x))
1057 text_map(map, xdiv, nice, a->p1.y / ydiv,
1058 0, a->p1.y - xdiv);
1059 } else if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) {
1060 text_map(map, xdiv, nice, a->p0.y / ydiv, a->p0.x, a->p1.x);
1061 }
1062}
1063
1064static void map_2d_info(char **map, int xdiv, int ydiv, char *nice,
1065 struct tcm_area *a)
1066{
1067 sprintf(nice, "(%d*%d)", tcm_awidth(*a), tcm_aheight(*a));
1068 if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x))
1069 text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv,
1070 a->p0.x, a->p1.x);
1071}
1072
1073int tiler_map_show(struct seq_file *s, void *arg)
1074{
1075 int xdiv = 2, ydiv = 1;
1076 char **map = NULL, *global_map;
1077 struct tiler_block *block;
1078 struct tcm_area a, p;
1079 int i;
1080 const char *m2d = alphabet;
1081 const char *a2d = special;
1082 const char *m2dp = m2d, *a2dp = a2d;
1083 char nice[128];
1084 int h_adj;
1085 int w_adj;
1086 unsigned long flags;
1087 int lut_idx;
1088
1089
1090 if (!omap_dmm) {
1091 /* early return if dmm/tiler device is not initialized */
1092 return 0;
1093 }
1094
1095 h_adj = omap_dmm->container_height / ydiv;
1096 w_adj = omap_dmm->container_width / xdiv;
1097
1098 map = kmalloc_array(h_adj, sizeof(*map), GFP_KERNEL);
1099 global_map = kmalloc_array(w_adj + 1, h_adj, GFP_KERNEL);
1100
1101 if (!map || !global_map)
1102 goto error;
1103
1104 for (lut_idx = 0; lut_idx < omap_dmm->num_lut; lut_idx++) {
1105 memset(map, 0, h_adj * sizeof(*map));
1106 memset(global_map, ' ', (w_adj + 1) * h_adj);
1107
1108 for (i = 0; i < omap_dmm->container_height; i++) {
1109 map[i] = global_map + i * (w_adj + 1);
1110 map[i][w_adj] = 0;
1111 }
1112
1113 spin_lock_irqsave(&list_lock, flags);
1114
1115 list_for_each_entry(block, &omap_dmm->alloc_head, alloc_node) {
1116 if (block->area.tcm == omap_dmm->tcm[lut_idx]) {
1117 if (block->fmt != TILFMT_PAGE) {
1118 fill_map(map, xdiv, ydiv, &block->area,
1119 *m2dp, true);
1120 if (!*++a2dp)
1121 a2dp = a2d;
1122 if (!*++m2dp)
1123 m2dp = m2d;
1124 map_2d_info(map, xdiv, ydiv, nice,
1125 &block->area);
1126 } else {
1127 bool start = read_map_pt(map, xdiv,
1128 ydiv, &block->area.p0) == ' ';
1129 bool end = read_map_pt(map, xdiv, ydiv,
1130 &block->area.p1) == ' ';
1131
1132 tcm_for_each_slice(a, block->area, p)
1133 fill_map(map, xdiv, ydiv, &a,
1134 '=', true);
1135 fill_map_pt(map, xdiv, ydiv,
1136 &block->area.p0,
1137 start ? '<' : 'X');
1138 fill_map_pt(map, xdiv, ydiv,
1139 &block->area.p1,
1140 end ? '>' : 'X');
1141 map_1d_info(map, xdiv, ydiv, nice,
1142 &block->area);
1143 }
1144 }
1145 }
1146
1147 spin_unlock_irqrestore(&list_lock, flags);
1148
1149 if (s) {
1150 seq_printf(s, "CONTAINER %d DUMP BEGIN\n", lut_idx);
1151 for (i = 0; i < 128; i++)
1152 seq_printf(s, "%03d:%s\n", i, map[i]);
1153 seq_printf(s, "CONTAINER %d DUMP END\n", lut_idx);
1154 } else {
1155 dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP BEGIN\n",
1156 lut_idx);
1157 for (i = 0; i < 128; i++)
1158 dev_dbg(omap_dmm->dev, "%03d:%s\n", i, map[i]);
1159 dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP END\n",
1160 lut_idx);
1161 }
1162 }
1163
1164error:
1165 kfree(map);
1166 kfree(global_map);
1167
1168 return 0;
1169}
1170#endif
1171
1172#ifdef CONFIG_PM_SLEEP
1173static int omap_dmm_resume(struct device *dev)
1174{
1175 struct tcm_area area;
1176 int i;
1177
1178 if (!omap_dmm)
1179 return -ENODEV;
1180
1181 area = (struct tcm_area) {
1182 .tcm = NULL,
1183 .p1.x = omap_dmm->container_width - 1,
1184 .p1.y = omap_dmm->container_height - 1,
1185 };
1186
1187 /* initialize all LUTs to dummy page entries */
1188 for (i = 0; i < omap_dmm->num_lut; i++) {
1189 area.tcm = omap_dmm->tcm[i];
1190 if (fill(&area, NULL, 0, 0, true))
1191 dev_err(dev, "refill failed");
1192 }
1193
1194 return 0;
1195}
1196#endif
1197
1198static SIMPLE_DEV_PM_OPS(omap_dmm_pm_ops, NULL, omap_dmm_resume);
1199
1200#if defined(CONFIG_OF)
1201static const struct dmm_platform_data dmm_omap4_platform_data = {
1202 .cpu_cache_flags = OMAP_BO_WC,
1203};
1204
1205static const struct dmm_platform_data dmm_omap5_platform_data = {
1206 .cpu_cache_flags = OMAP_BO_UNCACHED,
1207};
1208
1209static const struct of_device_id dmm_of_match[] = {
1210 {
1211 .compatible = "ti,omap4-dmm",
1212 .data = &dmm_omap4_platform_data,
1213 },
1214 {
1215 .compatible = "ti,omap5-dmm",
1216 .data = &dmm_omap5_platform_data,
1217 },
1218 {},
1219};
1220#endif
1221
1222struct platform_driver omap_dmm_driver = {
1223 .probe = omap_dmm_probe,
1224 .remove = omap_dmm_remove,
1225 .driver = {
1226 .owner = THIS_MODULE,
1227 .name = DMM_DRIVER_NAME,
1228 .of_match_table = of_match_ptr(dmm_of_match),
1229 .pm = &omap_dmm_pm_ops,
1230 },
1231};
1232
1233MODULE_LICENSE("GPL v2");
1234MODULE_AUTHOR("Andy Gross <andy.gross@ti.com>");
1235MODULE_DESCRIPTION("OMAP DMM/Tiler Driver");