Loading...
1/*
2 * Copyright © 2006-2011 Intel Corporation
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
11 * more details.
12 *
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, write to the Free Software Foundation, Inc.,
15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16 *
17 * Authors:
18 * Eric Anholt <eric@anholt.net>
19 * Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
20 */
21
22#include <drm/drmP.h>
23#include "gma_display.h"
24#include "psb_intel_drv.h"
25#include "psb_intel_reg.h"
26#include "psb_drv.h"
27#include "framebuffer.h"
28
29/**
30 * Returns whether any output on the specified pipe is of the specified type
31 */
32bool gma_pipe_has_type(struct drm_crtc *crtc, int type)
33{
34 struct drm_device *dev = crtc->dev;
35 struct drm_mode_config *mode_config = &dev->mode_config;
36 struct drm_connector *l_entry;
37
38 list_for_each_entry(l_entry, &mode_config->connector_list, head) {
39 if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
40 struct gma_encoder *gma_encoder =
41 gma_attached_encoder(l_entry);
42 if (gma_encoder->type == type)
43 return true;
44 }
45 }
46
47 return false;
48}
49
50void gma_wait_for_vblank(struct drm_device *dev)
51{
52 /* Wait for 20ms, i.e. one cycle at 50hz. */
53 mdelay(20);
54}
55
56int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y,
57 struct drm_framebuffer *old_fb)
58{
59 struct drm_device *dev = crtc->dev;
60 struct drm_psb_private *dev_priv = dev->dev_private;
61 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
62 struct psb_framebuffer *psbfb = to_psb_fb(crtc->primary->fb);
63 int pipe = gma_crtc->pipe;
64 const struct psb_offset *map = &dev_priv->regmap[pipe];
65 unsigned long start, offset;
66 u32 dspcntr;
67 int ret = 0;
68
69 if (!gma_power_begin(dev, true))
70 return 0;
71
72 /* no fb bound */
73 if (!crtc->primary->fb) {
74 dev_err(dev->dev, "No FB bound\n");
75 goto gma_pipe_cleaner;
76 }
77
78 /* We are displaying this buffer, make sure it is actually loaded
79 into the GTT */
80 ret = psb_gtt_pin(psbfb->gtt);
81 if (ret < 0)
82 goto gma_pipe_set_base_exit;
83 start = psbfb->gtt->offset;
84 offset = y * crtc->primary->fb->pitches[0] + x * (crtc->primary->fb->bits_per_pixel / 8);
85
86 REG_WRITE(map->stride, crtc->primary->fb->pitches[0]);
87
88 dspcntr = REG_READ(map->cntr);
89 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
90
91 switch (crtc->primary->fb->bits_per_pixel) {
92 case 8:
93 dspcntr |= DISPPLANE_8BPP;
94 break;
95 case 16:
96 if (crtc->primary->fb->depth == 15)
97 dspcntr |= DISPPLANE_15_16BPP;
98 else
99 dspcntr |= DISPPLANE_16BPP;
100 break;
101 case 24:
102 case 32:
103 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
104 break;
105 default:
106 dev_err(dev->dev, "Unknown color depth\n");
107 ret = -EINVAL;
108 goto gma_pipe_set_base_exit;
109 }
110 REG_WRITE(map->cntr, dspcntr);
111
112 dev_dbg(dev->dev,
113 "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
114
115 /* FIXME: Investigate whether this really is the base for psb and why
116 the linear offset is named base for the other chips. map->surf
117 should be the base and map->linoff the offset for all chips */
118 if (IS_PSB(dev)) {
119 REG_WRITE(map->base, offset + start);
120 REG_READ(map->base);
121 } else {
122 REG_WRITE(map->base, offset);
123 REG_READ(map->base);
124 REG_WRITE(map->surf, start);
125 REG_READ(map->surf);
126 }
127
128gma_pipe_cleaner:
129 /* If there was a previous display we can now unpin it */
130 if (old_fb)
131 psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
132
133gma_pipe_set_base_exit:
134 gma_power_end(dev);
135 return ret;
136}
137
138/* Loads the palette/gamma unit for the CRTC with the prepared values */
139void gma_crtc_load_lut(struct drm_crtc *crtc)
140{
141 struct drm_device *dev = crtc->dev;
142 struct drm_psb_private *dev_priv = dev->dev_private;
143 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
144 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
145 int palreg = map->palette;
146 int i;
147
148 /* The clocks have to be on to load the palette. */
149 if (!crtc->enabled)
150 return;
151
152 if (gma_power_begin(dev, false)) {
153 for (i = 0; i < 256; i++) {
154 REG_WRITE(palreg + 4 * i,
155 ((gma_crtc->lut_r[i] +
156 gma_crtc->lut_adj[i]) << 16) |
157 ((gma_crtc->lut_g[i] +
158 gma_crtc->lut_adj[i]) << 8) |
159 (gma_crtc->lut_b[i] +
160 gma_crtc->lut_adj[i]));
161 }
162 gma_power_end(dev);
163 } else {
164 for (i = 0; i < 256; i++) {
165 /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */
166 dev_priv->regs.pipe[0].palette[i] =
167 ((gma_crtc->lut_r[i] +
168 gma_crtc->lut_adj[i]) << 16) |
169 ((gma_crtc->lut_g[i] +
170 gma_crtc->lut_adj[i]) << 8) |
171 (gma_crtc->lut_b[i] +
172 gma_crtc->lut_adj[i]);
173 }
174
175 }
176}
177
178void gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue,
179 u32 start, u32 size)
180{
181 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
182 int i;
183 int end = (start + size > 256) ? 256 : start + size;
184
185 for (i = start; i < end; i++) {
186 gma_crtc->lut_r[i] = red[i] >> 8;
187 gma_crtc->lut_g[i] = green[i] >> 8;
188 gma_crtc->lut_b[i] = blue[i] >> 8;
189 }
190
191 gma_crtc_load_lut(crtc);
192}
193
194/**
195 * Sets the power management mode of the pipe and plane.
196 *
197 * This code should probably grow support for turning the cursor off and back
198 * on appropriately at the same time as we're turning the pipe off/on.
199 */
200void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
201{
202 struct drm_device *dev = crtc->dev;
203 struct drm_psb_private *dev_priv = dev->dev_private;
204 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
205 int pipe = gma_crtc->pipe;
206 const struct psb_offset *map = &dev_priv->regmap[pipe];
207 u32 temp;
208
209 /* XXX: When our outputs are all unaware of DPMS modes other than off
210 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
211 */
212
213 if (IS_CDV(dev))
214 dev_priv->ops->disable_sr(dev);
215
216 switch (mode) {
217 case DRM_MODE_DPMS_ON:
218 case DRM_MODE_DPMS_STANDBY:
219 case DRM_MODE_DPMS_SUSPEND:
220 if (gma_crtc->active)
221 break;
222
223 gma_crtc->active = true;
224
225 /* Enable the DPLL */
226 temp = REG_READ(map->dpll);
227 if ((temp & DPLL_VCO_ENABLE) == 0) {
228 REG_WRITE(map->dpll, temp);
229 REG_READ(map->dpll);
230 /* Wait for the clocks to stabilize. */
231 udelay(150);
232 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
233 REG_READ(map->dpll);
234 /* Wait for the clocks to stabilize. */
235 udelay(150);
236 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
237 REG_READ(map->dpll);
238 /* Wait for the clocks to stabilize. */
239 udelay(150);
240 }
241
242 /* Enable the plane */
243 temp = REG_READ(map->cntr);
244 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
245 REG_WRITE(map->cntr,
246 temp | DISPLAY_PLANE_ENABLE);
247 /* Flush the plane changes */
248 REG_WRITE(map->base, REG_READ(map->base));
249 }
250
251 udelay(150);
252
253 /* Enable the pipe */
254 temp = REG_READ(map->conf);
255 if ((temp & PIPEACONF_ENABLE) == 0)
256 REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
257
258 temp = REG_READ(map->status);
259 temp &= ~(0xFFFF);
260 temp |= PIPE_FIFO_UNDERRUN;
261 REG_WRITE(map->status, temp);
262 REG_READ(map->status);
263
264 gma_crtc_load_lut(crtc);
265
266 /* Give the overlay scaler a chance to enable
267 * if it's on this pipe */
268 /* psb_intel_crtc_dpms_video(crtc, true); TODO */
269 break;
270 case DRM_MODE_DPMS_OFF:
271 if (!gma_crtc->active)
272 break;
273
274 gma_crtc->active = false;
275
276 /* Give the overlay scaler a chance to disable
277 * if it's on this pipe */
278 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
279
280 /* Disable the VGA plane that we never use */
281 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
282
283 /* Turn off vblank interrupts */
284 drm_vblank_off(dev, pipe);
285
286 /* Wait for vblank for the disable to take effect */
287 gma_wait_for_vblank(dev);
288
289 /* Disable plane */
290 temp = REG_READ(map->cntr);
291 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
292 REG_WRITE(map->cntr,
293 temp & ~DISPLAY_PLANE_ENABLE);
294 /* Flush the plane changes */
295 REG_WRITE(map->base, REG_READ(map->base));
296 REG_READ(map->base);
297 }
298
299 /* Disable pipe */
300 temp = REG_READ(map->conf);
301 if ((temp & PIPEACONF_ENABLE) != 0) {
302 REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
303 REG_READ(map->conf);
304 }
305
306 /* Wait for vblank for the disable to take effect. */
307 gma_wait_for_vblank(dev);
308
309 udelay(150);
310
311 /* Disable DPLL */
312 temp = REG_READ(map->dpll);
313 if ((temp & DPLL_VCO_ENABLE) != 0) {
314 REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
315 REG_READ(map->dpll);
316 }
317
318 /* Wait for the clocks to turn off. */
319 udelay(150);
320 break;
321 }
322
323 if (IS_CDV(dev))
324 dev_priv->ops->update_wm(dev, crtc);
325
326 /* Set FIFO watermarks */
327 REG_WRITE(DSPARB, 0x3F3E);
328}
329
330int gma_crtc_cursor_set(struct drm_crtc *crtc,
331 struct drm_file *file_priv,
332 uint32_t handle,
333 uint32_t width, uint32_t height)
334{
335 struct drm_device *dev = crtc->dev;
336 struct drm_psb_private *dev_priv = dev->dev_private;
337 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
338 int pipe = gma_crtc->pipe;
339 uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
340 uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
341 uint32_t temp;
342 size_t addr = 0;
343 struct gtt_range *gt;
344 struct gtt_range *cursor_gt = gma_crtc->cursor_gt;
345 struct drm_gem_object *obj;
346 void *tmp_dst, *tmp_src;
347 int ret = 0, i, cursor_pages;
348
349 /* If we didn't get a handle then turn the cursor off */
350 if (!handle) {
351 temp = CURSOR_MODE_DISABLE;
352 if (gma_power_begin(dev, false)) {
353 REG_WRITE(control, temp);
354 REG_WRITE(base, 0);
355 gma_power_end(dev);
356 }
357
358 /* Unpin the old GEM object */
359 if (gma_crtc->cursor_obj) {
360 gt = container_of(gma_crtc->cursor_obj,
361 struct gtt_range, gem);
362 psb_gtt_unpin(gt);
363 drm_gem_object_unreference_unlocked(gma_crtc->cursor_obj);
364 gma_crtc->cursor_obj = NULL;
365 }
366 return 0;
367 }
368
369 /* Currently we only support 64x64 cursors */
370 if (width != 64 || height != 64) {
371 dev_dbg(dev->dev, "We currently only support 64x64 cursors\n");
372 return -EINVAL;
373 }
374
375 obj = drm_gem_object_lookup(dev, file_priv, handle);
376 if (!obj) {
377 ret = -ENOENT;
378 goto unlock;
379 }
380
381 if (obj->size < width * height * 4) {
382 dev_dbg(dev->dev, "Buffer is too small\n");
383 ret = -ENOMEM;
384 goto unref_cursor;
385 }
386
387 gt = container_of(obj, struct gtt_range, gem);
388
389 /* Pin the memory into the GTT */
390 ret = psb_gtt_pin(gt);
391 if (ret) {
392 dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
393 goto unref_cursor;
394 }
395
396 if (dev_priv->ops->cursor_needs_phys) {
397 if (cursor_gt == NULL) {
398 dev_err(dev->dev, "No hardware cursor mem available");
399 ret = -ENOMEM;
400 goto unref_cursor;
401 }
402
403 /* Prevent overflow */
404 if (gt->npage > 4)
405 cursor_pages = 4;
406 else
407 cursor_pages = gt->npage;
408
409 /* Copy the cursor to cursor mem */
410 tmp_dst = dev_priv->vram_addr + cursor_gt->offset;
411 for (i = 0; i < cursor_pages; i++) {
412 tmp_src = kmap(gt->pages[i]);
413 memcpy(tmp_dst, tmp_src, PAGE_SIZE);
414 kunmap(gt->pages[i]);
415 tmp_dst += PAGE_SIZE;
416 }
417
418 addr = gma_crtc->cursor_addr;
419 } else {
420 addr = gt->offset;
421 gma_crtc->cursor_addr = addr;
422 }
423
424 temp = 0;
425 /* set the pipe for the cursor */
426 temp |= (pipe << 28);
427 temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
428
429 if (gma_power_begin(dev, false)) {
430 REG_WRITE(control, temp);
431 REG_WRITE(base, addr);
432 gma_power_end(dev);
433 }
434
435 /* unpin the old bo */
436 if (gma_crtc->cursor_obj) {
437 gt = container_of(gma_crtc->cursor_obj, struct gtt_range, gem);
438 psb_gtt_unpin(gt);
439 drm_gem_object_unreference_unlocked(gma_crtc->cursor_obj);
440 }
441
442 gma_crtc->cursor_obj = obj;
443unlock:
444 return ret;
445
446unref_cursor:
447 drm_gem_object_unreference_unlocked(obj);
448 return ret;
449}
450
451int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
452{
453 struct drm_device *dev = crtc->dev;
454 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
455 int pipe = gma_crtc->pipe;
456 uint32_t temp = 0;
457 uint32_t addr;
458
459 if (x < 0) {
460 temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
461 x = -x;
462 }
463 if (y < 0) {
464 temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
465 y = -y;
466 }
467
468 temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
469 temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
470
471 addr = gma_crtc->cursor_addr;
472
473 if (gma_power_begin(dev, false)) {
474 REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
475 REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr);
476 gma_power_end(dev);
477 }
478 return 0;
479}
480
481void gma_crtc_prepare(struct drm_crtc *crtc)
482{
483 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
484 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
485}
486
487void gma_crtc_commit(struct drm_crtc *crtc)
488{
489 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
490 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
491}
492
493void gma_crtc_disable(struct drm_crtc *crtc)
494{
495 struct gtt_range *gt;
496 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
497
498 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
499
500 if (crtc->primary->fb) {
501 gt = to_psb_fb(crtc->primary->fb)->gtt;
502 psb_gtt_unpin(gt);
503 }
504}
505
506void gma_crtc_destroy(struct drm_crtc *crtc)
507{
508 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
509
510 kfree(gma_crtc->crtc_state);
511 drm_crtc_cleanup(crtc);
512 kfree(gma_crtc);
513}
514
515int gma_crtc_set_config(struct drm_mode_set *set)
516{
517 struct drm_device *dev = set->crtc->dev;
518 struct drm_psb_private *dev_priv = dev->dev_private;
519 int ret;
520
521 if (!dev_priv->rpm_enabled)
522 return drm_crtc_helper_set_config(set);
523
524 pm_runtime_forbid(&dev->pdev->dev);
525 ret = drm_crtc_helper_set_config(set);
526 pm_runtime_allow(&dev->pdev->dev);
527
528 return ret;
529}
530
531/**
532 * Save HW states of given crtc
533 */
534void gma_crtc_save(struct drm_crtc *crtc)
535{
536 struct drm_device *dev = crtc->dev;
537 struct drm_psb_private *dev_priv = dev->dev_private;
538 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
539 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
540 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
541 uint32_t palette_reg;
542 int i;
543
544 if (!crtc_state) {
545 dev_err(dev->dev, "No CRTC state found\n");
546 return;
547 }
548
549 crtc_state->saveDSPCNTR = REG_READ(map->cntr);
550 crtc_state->savePIPECONF = REG_READ(map->conf);
551 crtc_state->savePIPESRC = REG_READ(map->src);
552 crtc_state->saveFP0 = REG_READ(map->fp0);
553 crtc_state->saveFP1 = REG_READ(map->fp1);
554 crtc_state->saveDPLL = REG_READ(map->dpll);
555 crtc_state->saveHTOTAL = REG_READ(map->htotal);
556 crtc_state->saveHBLANK = REG_READ(map->hblank);
557 crtc_state->saveHSYNC = REG_READ(map->hsync);
558 crtc_state->saveVTOTAL = REG_READ(map->vtotal);
559 crtc_state->saveVBLANK = REG_READ(map->vblank);
560 crtc_state->saveVSYNC = REG_READ(map->vsync);
561 crtc_state->saveDSPSTRIDE = REG_READ(map->stride);
562
563 /* NOTE: DSPSIZE DSPPOS only for psb */
564 crtc_state->saveDSPSIZE = REG_READ(map->size);
565 crtc_state->saveDSPPOS = REG_READ(map->pos);
566
567 crtc_state->saveDSPBASE = REG_READ(map->base);
568
569 palette_reg = map->palette;
570 for (i = 0; i < 256; ++i)
571 crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2));
572}
573
574/**
575 * Restore HW states of given crtc
576 */
577void gma_crtc_restore(struct drm_crtc *crtc)
578{
579 struct drm_device *dev = crtc->dev;
580 struct drm_psb_private *dev_priv = dev->dev_private;
581 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
582 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
583 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
584 uint32_t palette_reg;
585 int i;
586
587 if (!crtc_state) {
588 dev_err(dev->dev, "No crtc state\n");
589 return;
590 }
591
592 if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
593 REG_WRITE(map->dpll,
594 crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
595 REG_READ(map->dpll);
596 udelay(150);
597 }
598
599 REG_WRITE(map->fp0, crtc_state->saveFP0);
600 REG_READ(map->fp0);
601
602 REG_WRITE(map->fp1, crtc_state->saveFP1);
603 REG_READ(map->fp1);
604
605 REG_WRITE(map->dpll, crtc_state->saveDPLL);
606 REG_READ(map->dpll);
607 udelay(150);
608
609 REG_WRITE(map->htotal, crtc_state->saveHTOTAL);
610 REG_WRITE(map->hblank, crtc_state->saveHBLANK);
611 REG_WRITE(map->hsync, crtc_state->saveHSYNC);
612 REG_WRITE(map->vtotal, crtc_state->saveVTOTAL);
613 REG_WRITE(map->vblank, crtc_state->saveVBLANK);
614 REG_WRITE(map->vsync, crtc_state->saveVSYNC);
615 REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE);
616
617 REG_WRITE(map->size, crtc_state->saveDSPSIZE);
618 REG_WRITE(map->pos, crtc_state->saveDSPPOS);
619
620 REG_WRITE(map->src, crtc_state->savePIPESRC);
621 REG_WRITE(map->base, crtc_state->saveDSPBASE);
622 REG_WRITE(map->conf, crtc_state->savePIPECONF);
623
624 gma_wait_for_vblank(dev);
625
626 REG_WRITE(map->cntr, crtc_state->saveDSPCNTR);
627 REG_WRITE(map->base, crtc_state->saveDSPBASE);
628
629 gma_wait_for_vblank(dev);
630
631 palette_reg = map->palette;
632 for (i = 0; i < 256; ++i)
633 REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]);
634}
635
636void gma_encoder_prepare(struct drm_encoder *encoder)
637{
638 const struct drm_encoder_helper_funcs *encoder_funcs =
639 encoder->helper_private;
640 /* lvds has its own version of prepare see psb_intel_lvds_prepare */
641 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
642}
643
644void gma_encoder_commit(struct drm_encoder *encoder)
645{
646 const struct drm_encoder_helper_funcs *encoder_funcs =
647 encoder->helper_private;
648 /* lvds has its own version of commit see psb_intel_lvds_commit */
649 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
650}
651
652void gma_encoder_destroy(struct drm_encoder *encoder)
653{
654 struct gma_encoder *intel_encoder = to_gma_encoder(encoder);
655
656 drm_encoder_cleanup(encoder);
657 kfree(intel_encoder);
658}
659
660/* Currently there is only a 1:1 mapping of encoders and connectors */
661struct drm_encoder *gma_best_encoder(struct drm_connector *connector)
662{
663 struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
664
665 return &gma_encoder->base;
666}
667
668void gma_connector_attach_encoder(struct gma_connector *connector,
669 struct gma_encoder *encoder)
670{
671 connector->encoder = encoder;
672 drm_mode_connector_attach_encoder(&connector->base,
673 &encoder->base);
674}
675
676#define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; }
677
678bool gma_pll_is_valid(struct drm_crtc *crtc,
679 const struct gma_limit_t *limit,
680 struct gma_clock_t *clock)
681{
682 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
683 GMA_PLL_INVALID("p1 out of range");
684 if (clock->p < limit->p.min || limit->p.max < clock->p)
685 GMA_PLL_INVALID("p out of range");
686 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
687 GMA_PLL_INVALID("m2 out of range");
688 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
689 GMA_PLL_INVALID("m1 out of range");
690 /* On CDV m1 is always 0 */
691 if (clock->m1 <= clock->m2 && clock->m1 != 0)
692 GMA_PLL_INVALID("m1 <= m2 && m1 != 0");
693 if (clock->m < limit->m.min || limit->m.max < clock->m)
694 GMA_PLL_INVALID("m out of range");
695 if (clock->n < limit->n.min || limit->n.max < clock->n)
696 GMA_PLL_INVALID("n out of range");
697 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
698 GMA_PLL_INVALID("vco out of range");
699 /* XXX: We may need to be checking "Dot clock"
700 * depending on the multiplier, connector, etc.,
701 * rather than just a single range.
702 */
703 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
704 GMA_PLL_INVALID("dot out of range");
705
706 return true;
707}
708
709bool gma_find_best_pll(const struct gma_limit_t *limit,
710 struct drm_crtc *crtc, int target, int refclk,
711 struct gma_clock_t *best_clock)
712{
713 struct drm_device *dev = crtc->dev;
714 const struct gma_clock_funcs *clock_funcs =
715 to_gma_crtc(crtc)->clock_funcs;
716 struct gma_clock_t clock;
717 int err = target;
718
719 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
720 (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
721 /*
722 * For LVDS, if the panel is on, just rely on its current
723 * settings for dual-channel. We haven't figured out how to
724 * reliably set up different single/dual channel state, if we
725 * even can.
726 */
727 if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
728 LVDS_CLKB_POWER_UP)
729 clock.p2 = limit->p2.p2_fast;
730 else
731 clock.p2 = limit->p2.p2_slow;
732 } else {
733 if (target < limit->p2.dot_limit)
734 clock.p2 = limit->p2.p2_slow;
735 else
736 clock.p2 = limit->p2.p2_fast;
737 }
738
739 memset(best_clock, 0, sizeof(*best_clock));
740
741 /* m1 is always 0 on CDV so the outmost loop will run just once */
742 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
743 for (clock.m2 = limit->m2.min;
744 (clock.m2 < clock.m1 || clock.m1 == 0) &&
745 clock.m2 <= limit->m2.max; clock.m2++) {
746 for (clock.n = limit->n.min;
747 clock.n <= limit->n.max; clock.n++) {
748 for (clock.p1 = limit->p1.min;
749 clock.p1 <= limit->p1.max;
750 clock.p1++) {
751 int this_err;
752
753 clock_funcs->clock(refclk, &clock);
754
755 if (!clock_funcs->pll_is_valid(crtc,
756 limit, &clock))
757 continue;
758
759 this_err = abs(clock.dot - target);
760 if (this_err < err) {
761 *best_clock = clock;
762 err = this_err;
763 }
764 }
765 }
766 }
767 }
768
769 return err != target;
770}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright © 2006-2011 Intel Corporation
4 *
5 * Authors:
6 * Eric Anholt <eric@anholt.net>
7 * Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
8 */
9
10#include <linux/delay.h>
11#include <linux/highmem.h>
12
13#include <drm/drm_crtc.h>
14#include <drm/drm_fourcc.h>
15#include <drm/drm_vblank.h>
16
17#include "framebuffer.h"
18#include "gma_display.h"
19#include "psb_drv.h"
20#include "psb_intel_drv.h"
21#include "psb_intel_reg.h"
22
23/**
24 * Returns whether any output on the specified pipe is of the specified type
25 */
26bool gma_pipe_has_type(struct drm_crtc *crtc, int type)
27{
28 struct drm_device *dev = crtc->dev;
29 struct drm_mode_config *mode_config = &dev->mode_config;
30 struct drm_connector *l_entry;
31
32 list_for_each_entry(l_entry, &mode_config->connector_list, head) {
33 if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
34 struct gma_encoder *gma_encoder =
35 gma_attached_encoder(l_entry);
36 if (gma_encoder->type == type)
37 return true;
38 }
39 }
40
41 return false;
42}
43
44void gma_wait_for_vblank(struct drm_device *dev)
45{
46 /* Wait for 20ms, i.e. one cycle at 50hz. */
47 mdelay(20);
48}
49
50int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y,
51 struct drm_framebuffer *old_fb)
52{
53 struct drm_device *dev = crtc->dev;
54 struct drm_psb_private *dev_priv = dev->dev_private;
55 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
56 struct drm_framebuffer *fb = crtc->primary->fb;
57 struct gtt_range *gtt;
58 int pipe = gma_crtc->pipe;
59 const struct psb_offset *map = &dev_priv->regmap[pipe];
60 unsigned long start, offset;
61 u32 dspcntr;
62 int ret = 0;
63
64 if (!gma_power_begin(dev, true))
65 return 0;
66
67 /* no fb bound */
68 if (!fb) {
69 dev_err(dev->dev, "No FB bound\n");
70 goto gma_pipe_cleaner;
71 }
72
73 gtt = to_gtt_range(fb->obj[0]);
74
75 /* We are displaying this buffer, make sure it is actually loaded
76 into the GTT */
77 ret = psb_gtt_pin(gtt);
78 if (ret < 0)
79 goto gma_pipe_set_base_exit;
80 start = gtt->offset;
81 offset = y * fb->pitches[0] + x * fb->format->cpp[0];
82
83 REG_WRITE(map->stride, fb->pitches[0]);
84
85 dspcntr = REG_READ(map->cntr);
86 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
87
88 switch (fb->format->cpp[0] * 8) {
89 case 8:
90 dspcntr |= DISPPLANE_8BPP;
91 break;
92 case 16:
93 if (fb->format->depth == 15)
94 dspcntr |= DISPPLANE_15_16BPP;
95 else
96 dspcntr |= DISPPLANE_16BPP;
97 break;
98 case 24:
99 case 32:
100 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
101 break;
102 default:
103 dev_err(dev->dev, "Unknown color depth\n");
104 ret = -EINVAL;
105 goto gma_pipe_set_base_exit;
106 }
107 REG_WRITE(map->cntr, dspcntr);
108
109 dev_dbg(dev->dev,
110 "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
111
112 /* FIXME: Investigate whether this really is the base for psb and why
113 the linear offset is named base for the other chips. map->surf
114 should be the base and map->linoff the offset for all chips */
115 if (IS_PSB(dev)) {
116 REG_WRITE(map->base, offset + start);
117 REG_READ(map->base);
118 } else {
119 REG_WRITE(map->base, offset);
120 REG_READ(map->base);
121 REG_WRITE(map->surf, start);
122 REG_READ(map->surf);
123 }
124
125gma_pipe_cleaner:
126 /* If there was a previous display we can now unpin it */
127 if (old_fb)
128 psb_gtt_unpin(to_gtt_range(old_fb->obj[0]));
129
130gma_pipe_set_base_exit:
131 gma_power_end(dev);
132 return ret;
133}
134
135/* Loads the palette/gamma unit for the CRTC with the prepared values */
136void gma_crtc_load_lut(struct drm_crtc *crtc)
137{
138 struct drm_device *dev = crtc->dev;
139 struct drm_psb_private *dev_priv = dev->dev_private;
140 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
141 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
142 int palreg = map->palette;
143 u16 *r, *g, *b;
144 int i;
145
146 /* The clocks have to be on to load the palette. */
147 if (!crtc->enabled)
148 return;
149
150 r = crtc->gamma_store;
151 g = r + crtc->gamma_size;
152 b = g + crtc->gamma_size;
153
154 if (gma_power_begin(dev, false)) {
155 for (i = 0; i < 256; i++) {
156 REG_WRITE(palreg + 4 * i,
157 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) |
158 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) |
159 ((*b++ >> 8) + gma_crtc->lut_adj[i]));
160 }
161 gma_power_end(dev);
162 } else {
163 for (i = 0; i < 256; i++) {
164 /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */
165 dev_priv->regs.pipe[0].palette[i] =
166 (((*r++ >> 8) + gma_crtc->lut_adj[i]) << 16) |
167 (((*g++ >> 8) + gma_crtc->lut_adj[i]) << 8) |
168 ((*b++ >> 8) + gma_crtc->lut_adj[i]);
169 }
170
171 }
172}
173
174int gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue,
175 u32 size,
176 struct drm_modeset_acquire_ctx *ctx)
177{
178 gma_crtc_load_lut(crtc);
179
180 return 0;
181}
182
183/**
184 * Sets the power management mode of the pipe and plane.
185 *
186 * This code should probably grow support for turning the cursor off and back
187 * on appropriately at the same time as we're turning the pipe off/on.
188 */
189void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
190{
191 struct drm_device *dev = crtc->dev;
192 struct drm_psb_private *dev_priv = dev->dev_private;
193 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
194 int pipe = gma_crtc->pipe;
195 const struct psb_offset *map = &dev_priv->regmap[pipe];
196 u32 temp;
197
198 /* XXX: When our outputs are all unaware of DPMS modes other than off
199 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
200 */
201
202 if (IS_CDV(dev))
203 dev_priv->ops->disable_sr(dev);
204
205 switch (mode) {
206 case DRM_MODE_DPMS_ON:
207 case DRM_MODE_DPMS_STANDBY:
208 case DRM_MODE_DPMS_SUSPEND:
209 if (gma_crtc->active)
210 break;
211
212 gma_crtc->active = true;
213
214 /* Enable the DPLL */
215 temp = REG_READ(map->dpll);
216 if ((temp & DPLL_VCO_ENABLE) == 0) {
217 REG_WRITE(map->dpll, temp);
218 REG_READ(map->dpll);
219 /* Wait for the clocks to stabilize. */
220 udelay(150);
221 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
222 REG_READ(map->dpll);
223 /* Wait for the clocks to stabilize. */
224 udelay(150);
225 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
226 REG_READ(map->dpll);
227 /* Wait for the clocks to stabilize. */
228 udelay(150);
229 }
230
231 /* Enable the plane */
232 temp = REG_READ(map->cntr);
233 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
234 REG_WRITE(map->cntr,
235 temp | DISPLAY_PLANE_ENABLE);
236 /* Flush the plane changes */
237 REG_WRITE(map->base, REG_READ(map->base));
238 }
239
240 udelay(150);
241
242 /* Enable the pipe */
243 temp = REG_READ(map->conf);
244 if ((temp & PIPEACONF_ENABLE) == 0)
245 REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
246
247 temp = REG_READ(map->status);
248 temp &= ~(0xFFFF);
249 temp |= PIPE_FIFO_UNDERRUN;
250 REG_WRITE(map->status, temp);
251 REG_READ(map->status);
252
253 gma_crtc_load_lut(crtc);
254
255 /* Give the overlay scaler a chance to enable
256 * if it's on this pipe */
257 /* psb_intel_crtc_dpms_video(crtc, true); TODO */
258
259 drm_crtc_vblank_on(crtc);
260 break;
261 case DRM_MODE_DPMS_OFF:
262 if (!gma_crtc->active)
263 break;
264
265 gma_crtc->active = false;
266
267 /* Give the overlay scaler a chance to disable
268 * if it's on this pipe */
269 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
270
271 /* Disable the VGA plane that we never use */
272 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
273
274 /* Turn off vblank interrupts */
275 drm_crtc_vblank_off(crtc);
276
277 /* Wait for vblank for the disable to take effect */
278 gma_wait_for_vblank(dev);
279
280 /* Disable plane */
281 temp = REG_READ(map->cntr);
282 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
283 REG_WRITE(map->cntr,
284 temp & ~DISPLAY_PLANE_ENABLE);
285 /* Flush the plane changes */
286 REG_WRITE(map->base, REG_READ(map->base));
287 REG_READ(map->base);
288 }
289
290 /* Disable pipe */
291 temp = REG_READ(map->conf);
292 if ((temp & PIPEACONF_ENABLE) != 0) {
293 REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
294 REG_READ(map->conf);
295 }
296
297 /* Wait for vblank for the disable to take effect. */
298 gma_wait_for_vblank(dev);
299
300 udelay(150);
301
302 /* Disable DPLL */
303 temp = REG_READ(map->dpll);
304 if ((temp & DPLL_VCO_ENABLE) != 0) {
305 REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
306 REG_READ(map->dpll);
307 }
308
309 /* Wait for the clocks to turn off. */
310 udelay(150);
311 break;
312 }
313
314 if (IS_CDV(dev))
315 dev_priv->ops->update_wm(dev, crtc);
316
317 /* Set FIFO watermarks */
318 REG_WRITE(DSPARB, 0x3F3E);
319}
320
321int gma_crtc_cursor_set(struct drm_crtc *crtc,
322 struct drm_file *file_priv,
323 uint32_t handle,
324 uint32_t width, uint32_t height)
325{
326 struct drm_device *dev = crtc->dev;
327 struct drm_psb_private *dev_priv = dev->dev_private;
328 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
329 int pipe = gma_crtc->pipe;
330 uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
331 uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
332 uint32_t temp;
333 size_t addr = 0;
334 struct gtt_range *gt;
335 struct gtt_range *cursor_gt = gma_crtc->cursor_gt;
336 struct drm_gem_object *obj;
337 void *tmp_dst, *tmp_src;
338 int ret = 0, i, cursor_pages;
339
340 /* If we didn't get a handle then turn the cursor off */
341 if (!handle) {
342 temp = CURSOR_MODE_DISABLE;
343 if (gma_power_begin(dev, false)) {
344 REG_WRITE(control, temp);
345 REG_WRITE(base, 0);
346 gma_power_end(dev);
347 }
348
349 /* Unpin the old GEM object */
350 if (gma_crtc->cursor_obj) {
351 gt = container_of(gma_crtc->cursor_obj,
352 struct gtt_range, gem);
353 psb_gtt_unpin(gt);
354 drm_gem_object_put(gma_crtc->cursor_obj);
355 gma_crtc->cursor_obj = NULL;
356 }
357 return 0;
358 }
359
360 /* Currently we only support 64x64 cursors */
361 if (width != 64 || height != 64) {
362 dev_dbg(dev->dev, "We currently only support 64x64 cursors\n");
363 return -EINVAL;
364 }
365
366 obj = drm_gem_object_lookup(file_priv, handle);
367 if (!obj) {
368 ret = -ENOENT;
369 goto unlock;
370 }
371
372 if (obj->size < width * height * 4) {
373 dev_dbg(dev->dev, "Buffer is too small\n");
374 ret = -ENOMEM;
375 goto unref_cursor;
376 }
377
378 gt = container_of(obj, struct gtt_range, gem);
379
380 /* Pin the memory into the GTT */
381 ret = psb_gtt_pin(gt);
382 if (ret) {
383 dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
384 goto unref_cursor;
385 }
386
387 if (dev_priv->ops->cursor_needs_phys) {
388 if (cursor_gt == NULL) {
389 dev_err(dev->dev, "No hardware cursor mem available");
390 ret = -ENOMEM;
391 goto unref_cursor;
392 }
393
394 /* Prevent overflow */
395 if (gt->npage > 4)
396 cursor_pages = 4;
397 else
398 cursor_pages = gt->npage;
399
400 /* Copy the cursor to cursor mem */
401 tmp_dst = dev_priv->vram_addr + cursor_gt->offset;
402 for (i = 0; i < cursor_pages; i++) {
403 tmp_src = kmap(gt->pages[i]);
404 memcpy(tmp_dst, tmp_src, PAGE_SIZE);
405 kunmap(gt->pages[i]);
406 tmp_dst += PAGE_SIZE;
407 }
408
409 addr = gma_crtc->cursor_addr;
410 } else {
411 addr = gt->offset;
412 gma_crtc->cursor_addr = addr;
413 }
414
415 temp = 0;
416 /* set the pipe for the cursor */
417 temp |= (pipe << 28);
418 temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
419
420 if (gma_power_begin(dev, false)) {
421 REG_WRITE(control, temp);
422 REG_WRITE(base, addr);
423 gma_power_end(dev);
424 }
425
426 /* unpin the old bo */
427 if (gma_crtc->cursor_obj) {
428 gt = container_of(gma_crtc->cursor_obj, struct gtt_range, gem);
429 psb_gtt_unpin(gt);
430 drm_gem_object_put(gma_crtc->cursor_obj);
431 }
432
433 gma_crtc->cursor_obj = obj;
434unlock:
435 return ret;
436
437unref_cursor:
438 drm_gem_object_put(obj);
439 return ret;
440}
441
442int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
443{
444 struct drm_device *dev = crtc->dev;
445 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
446 int pipe = gma_crtc->pipe;
447 uint32_t temp = 0;
448 uint32_t addr;
449
450 if (x < 0) {
451 temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
452 x = -x;
453 }
454 if (y < 0) {
455 temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
456 y = -y;
457 }
458
459 temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
460 temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
461
462 addr = gma_crtc->cursor_addr;
463
464 if (gma_power_begin(dev, false)) {
465 REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
466 REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr);
467 gma_power_end(dev);
468 }
469 return 0;
470}
471
472void gma_crtc_prepare(struct drm_crtc *crtc)
473{
474 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
475 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
476}
477
478void gma_crtc_commit(struct drm_crtc *crtc)
479{
480 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
481 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
482}
483
484void gma_crtc_disable(struct drm_crtc *crtc)
485{
486 struct gtt_range *gt;
487 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
488
489 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
490
491 if (crtc->primary->fb) {
492 gt = to_gtt_range(crtc->primary->fb->obj[0]);
493 psb_gtt_unpin(gt);
494 }
495}
496
497void gma_crtc_destroy(struct drm_crtc *crtc)
498{
499 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
500
501 kfree(gma_crtc->crtc_state);
502 drm_crtc_cleanup(crtc);
503 kfree(gma_crtc);
504}
505
506int gma_crtc_page_flip(struct drm_crtc *crtc,
507 struct drm_framebuffer *fb,
508 struct drm_pending_vblank_event *event,
509 uint32_t page_flip_flags,
510 struct drm_modeset_acquire_ctx *ctx)
511{
512 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
513 struct drm_framebuffer *current_fb = crtc->primary->fb;
514 struct drm_framebuffer *old_fb = crtc->primary->old_fb;
515 const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
516 struct drm_device *dev = crtc->dev;
517 unsigned long flags;
518 int ret;
519
520 if (!crtc_funcs->mode_set_base)
521 return -EINVAL;
522
523 /* Using mode_set_base requires the new fb to be set already. */
524 crtc->primary->fb = fb;
525
526 if (event) {
527 spin_lock_irqsave(&dev->event_lock, flags);
528
529 WARN_ON(drm_crtc_vblank_get(crtc) != 0);
530
531 gma_crtc->page_flip_event = event;
532
533 /* Call this locked if we want an event at vblank interrupt. */
534 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb);
535 if (ret) {
536 gma_crtc->page_flip_event = NULL;
537 drm_crtc_vblank_put(crtc);
538 }
539
540 spin_unlock_irqrestore(&dev->event_lock, flags);
541 } else {
542 ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb);
543 }
544
545 /* Restore previous fb in case of failure. */
546 if (ret)
547 crtc->primary->fb = current_fb;
548
549 return ret;
550}
551
552int gma_crtc_set_config(struct drm_mode_set *set,
553 struct drm_modeset_acquire_ctx *ctx)
554{
555 struct drm_device *dev = set->crtc->dev;
556 struct drm_psb_private *dev_priv = dev->dev_private;
557 int ret;
558
559 if (!dev_priv->rpm_enabled)
560 return drm_crtc_helper_set_config(set, ctx);
561
562 pm_runtime_forbid(&dev->pdev->dev);
563 ret = drm_crtc_helper_set_config(set, ctx);
564 pm_runtime_allow(&dev->pdev->dev);
565
566 return ret;
567}
568
569/**
570 * Save HW states of given crtc
571 */
572void gma_crtc_save(struct drm_crtc *crtc)
573{
574 struct drm_device *dev = crtc->dev;
575 struct drm_psb_private *dev_priv = dev->dev_private;
576 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
577 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
578 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
579 uint32_t palette_reg;
580 int i;
581
582 if (!crtc_state) {
583 dev_err(dev->dev, "No CRTC state found\n");
584 return;
585 }
586
587 crtc_state->saveDSPCNTR = REG_READ(map->cntr);
588 crtc_state->savePIPECONF = REG_READ(map->conf);
589 crtc_state->savePIPESRC = REG_READ(map->src);
590 crtc_state->saveFP0 = REG_READ(map->fp0);
591 crtc_state->saveFP1 = REG_READ(map->fp1);
592 crtc_state->saveDPLL = REG_READ(map->dpll);
593 crtc_state->saveHTOTAL = REG_READ(map->htotal);
594 crtc_state->saveHBLANK = REG_READ(map->hblank);
595 crtc_state->saveHSYNC = REG_READ(map->hsync);
596 crtc_state->saveVTOTAL = REG_READ(map->vtotal);
597 crtc_state->saveVBLANK = REG_READ(map->vblank);
598 crtc_state->saveVSYNC = REG_READ(map->vsync);
599 crtc_state->saveDSPSTRIDE = REG_READ(map->stride);
600
601 /* NOTE: DSPSIZE DSPPOS only for psb */
602 crtc_state->saveDSPSIZE = REG_READ(map->size);
603 crtc_state->saveDSPPOS = REG_READ(map->pos);
604
605 crtc_state->saveDSPBASE = REG_READ(map->base);
606
607 palette_reg = map->palette;
608 for (i = 0; i < 256; ++i)
609 crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2));
610}
611
612/**
613 * Restore HW states of given crtc
614 */
615void gma_crtc_restore(struct drm_crtc *crtc)
616{
617 struct drm_device *dev = crtc->dev;
618 struct drm_psb_private *dev_priv = dev->dev_private;
619 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
620 struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
621 const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
622 uint32_t palette_reg;
623 int i;
624
625 if (!crtc_state) {
626 dev_err(dev->dev, "No crtc state\n");
627 return;
628 }
629
630 if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
631 REG_WRITE(map->dpll,
632 crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
633 REG_READ(map->dpll);
634 udelay(150);
635 }
636
637 REG_WRITE(map->fp0, crtc_state->saveFP0);
638 REG_READ(map->fp0);
639
640 REG_WRITE(map->fp1, crtc_state->saveFP1);
641 REG_READ(map->fp1);
642
643 REG_WRITE(map->dpll, crtc_state->saveDPLL);
644 REG_READ(map->dpll);
645 udelay(150);
646
647 REG_WRITE(map->htotal, crtc_state->saveHTOTAL);
648 REG_WRITE(map->hblank, crtc_state->saveHBLANK);
649 REG_WRITE(map->hsync, crtc_state->saveHSYNC);
650 REG_WRITE(map->vtotal, crtc_state->saveVTOTAL);
651 REG_WRITE(map->vblank, crtc_state->saveVBLANK);
652 REG_WRITE(map->vsync, crtc_state->saveVSYNC);
653 REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE);
654
655 REG_WRITE(map->size, crtc_state->saveDSPSIZE);
656 REG_WRITE(map->pos, crtc_state->saveDSPPOS);
657
658 REG_WRITE(map->src, crtc_state->savePIPESRC);
659 REG_WRITE(map->base, crtc_state->saveDSPBASE);
660 REG_WRITE(map->conf, crtc_state->savePIPECONF);
661
662 gma_wait_for_vblank(dev);
663
664 REG_WRITE(map->cntr, crtc_state->saveDSPCNTR);
665 REG_WRITE(map->base, crtc_state->saveDSPBASE);
666
667 gma_wait_for_vblank(dev);
668
669 palette_reg = map->palette;
670 for (i = 0; i < 256; ++i)
671 REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]);
672}
673
674void gma_encoder_prepare(struct drm_encoder *encoder)
675{
676 const struct drm_encoder_helper_funcs *encoder_funcs =
677 encoder->helper_private;
678 /* lvds has its own version of prepare see psb_intel_lvds_prepare */
679 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
680}
681
682void gma_encoder_commit(struct drm_encoder *encoder)
683{
684 const struct drm_encoder_helper_funcs *encoder_funcs =
685 encoder->helper_private;
686 /* lvds has its own version of commit see psb_intel_lvds_commit */
687 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
688}
689
690void gma_encoder_destroy(struct drm_encoder *encoder)
691{
692 struct gma_encoder *intel_encoder = to_gma_encoder(encoder);
693
694 drm_encoder_cleanup(encoder);
695 kfree(intel_encoder);
696}
697
698/* Currently there is only a 1:1 mapping of encoders and connectors */
699struct drm_encoder *gma_best_encoder(struct drm_connector *connector)
700{
701 struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
702
703 return &gma_encoder->base;
704}
705
706void gma_connector_attach_encoder(struct gma_connector *connector,
707 struct gma_encoder *encoder)
708{
709 connector->encoder = encoder;
710 drm_connector_attach_encoder(&connector->base,
711 &encoder->base);
712}
713
714#define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; }
715
716bool gma_pll_is_valid(struct drm_crtc *crtc,
717 const struct gma_limit_t *limit,
718 struct gma_clock_t *clock)
719{
720 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
721 GMA_PLL_INVALID("p1 out of range");
722 if (clock->p < limit->p.min || limit->p.max < clock->p)
723 GMA_PLL_INVALID("p out of range");
724 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
725 GMA_PLL_INVALID("m2 out of range");
726 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
727 GMA_PLL_INVALID("m1 out of range");
728 /* On CDV m1 is always 0 */
729 if (clock->m1 <= clock->m2 && clock->m1 != 0)
730 GMA_PLL_INVALID("m1 <= m2 && m1 != 0");
731 if (clock->m < limit->m.min || limit->m.max < clock->m)
732 GMA_PLL_INVALID("m out of range");
733 if (clock->n < limit->n.min || limit->n.max < clock->n)
734 GMA_PLL_INVALID("n out of range");
735 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
736 GMA_PLL_INVALID("vco out of range");
737 /* XXX: We may need to be checking "Dot clock"
738 * depending on the multiplier, connector, etc.,
739 * rather than just a single range.
740 */
741 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
742 GMA_PLL_INVALID("dot out of range");
743
744 return true;
745}
746
747bool gma_find_best_pll(const struct gma_limit_t *limit,
748 struct drm_crtc *crtc, int target, int refclk,
749 struct gma_clock_t *best_clock)
750{
751 struct drm_device *dev = crtc->dev;
752 const struct gma_clock_funcs *clock_funcs =
753 to_gma_crtc(crtc)->clock_funcs;
754 struct gma_clock_t clock;
755 int err = target;
756
757 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
758 (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
759 /*
760 * For LVDS, if the panel is on, just rely on its current
761 * settings for dual-channel. We haven't figured out how to
762 * reliably set up different single/dual channel state, if we
763 * even can.
764 */
765 if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
766 LVDS_CLKB_POWER_UP)
767 clock.p2 = limit->p2.p2_fast;
768 else
769 clock.p2 = limit->p2.p2_slow;
770 } else {
771 if (target < limit->p2.dot_limit)
772 clock.p2 = limit->p2.p2_slow;
773 else
774 clock.p2 = limit->p2.p2_fast;
775 }
776
777 memset(best_clock, 0, sizeof(*best_clock));
778
779 /* m1 is always 0 on CDV so the outmost loop will run just once */
780 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
781 for (clock.m2 = limit->m2.min;
782 (clock.m2 < clock.m1 || clock.m1 == 0) &&
783 clock.m2 <= limit->m2.max; clock.m2++) {
784 for (clock.n = limit->n.min;
785 clock.n <= limit->n.max; clock.n++) {
786 for (clock.p1 = limit->p1.min;
787 clock.p1 <= limit->p1.max;
788 clock.p1++) {
789 int this_err;
790
791 clock_funcs->clock(refclk, &clock);
792
793 if (!clock_funcs->pll_is_valid(crtc,
794 limit, &clock))
795 continue;
796
797 this_err = abs(clock.dot - target);
798 if (this_err < err) {
799 *best_clock = clock;
800 err = this_err;
801 }
802 }
803 }
804 }
805 }
806
807 return err != target;
808}