Linux Audio

Check our new training course

Loading...
v4.6
 
  1/*
  2 * Renesas R-Car GPIO Support
  3 *
  4 *  Copyright (C) 2014 Renesas Electronics Corporation
  5 *  Copyright (C) 2013 Magnus Damm
  6 *
  7 * This program is free software; you can redistribute it and/or modify
  8 * it under the terms of the GNU General Public License as published by
  9 * the Free Software Foundation; either version 2 of the License
 10 *
 11 * This program is distributed in the hope that it will be useful,
 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 14 * GNU General Public License for more details.
 15 */
 16
 17#include <linux/clk.h>
 18#include <linux/err.h>
 19#include <linux/gpio.h>
 20#include <linux/init.h>
 21#include <linux/interrupt.h>
 22#include <linux/io.h>
 23#include <linux/ioport.h>
 24#include <linux/irq.h>
 25#include <linux/module.h>
 26#include <linux/of.h>
 
 27#include <linux/pinctrl/consumer.h>
 28#include <linux/platform_device.h>
 29#include <linux/pm_runtime.h>
 30#include <linux/spinlock.h>
 31#include <linux/slab.h>
 32
 
 
 
 
 
 
 
 
 
 
 33struct gpio_rcar_priv {
 34	void __iomem *base;
 35	spinlock_t lock;
 36	struct platform_device *pdev;
 37	struct gpio_chip gpio_chip;
 38	struct irq_chip irq_chip;
 39	struct clk *clk;
 40	unsigned int irq_parent;
 
 
 41	bool has_both_edge_trigger;
 42	bool needs_clk;
 43};
 44
 45#define IOINTSEL 0x00	/* General IO/Interrupt Switching Register */
 46#define INOUTSEL 0x04	/* General Input/Output Switching Register */
 47#define OUTDT 0x08	/* General Output Register */
 48#define INDT 0x0c	/* General Input Register */
 49#define INTDT 0x10	/* Interrupt Display Register */
 50#define INTCLR 0x14	/* Interrupt Clear Register */
 51#define INTMSK 0x18	/* Interrupt Mask Register */
 52#define MSKCLR 0x1c	/* Interrupt Mask Clear Register */
 53#define POSNEG 0x20	/* Positive/Negative Logic Select Register */
 54#define EDGLEVEL 0x24	/* Edge/level Select Register */
 55#define FILONOFF 0x28	/* Chattering Prevention On/Off Register */
 
 56#define BOTHEDGE 0x4c	/* One Edge/Both Edge Select Register */
 57
 58#define RCAR_MAX_GPIO_PER_BANK		32
 59
 60static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
 61{
 62	return ioread32(p->base + offs);
 63}
 64
 65static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs,
 66				   u32 value)
 67{
 68	iowrite32(value, p->base + offs);
 69}
 70
 71static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs,
 72				 int bit, bool value)
 73{
 74	u32 tmp = gpio_rcar_read(p, offs);
 75
 76	if (value)
 77		tmp |= BIT(bit);
 78	else
 79		tmp &= ~BIT(bit);
 80
 81	gpio_rcar_write(p, offs, tmp);
 82}
 83
 84static void gpio_rcar_irq_disable(struct irq_data *d)
 85{
 86	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 87	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
 88
 89	gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d)));
 90}
 91
 92static void gpio_rcar_irq_enable(struct irq_data *d)
 93{
 94	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 95	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
 96
 97	gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d)));
 98}
 99
100static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
101						  unsigned int hwirq,
102						  bool active_high_rising_edge,
103						  bool level_trigger,
104						  bool both)
105{
106	unsigned long flags;
107
108	/* follow steps in the GPIO documentation for
109	 * "Setting Edge-Sensitive Interrupt Input Mode" and
110	 * "Setting Level-Sensitive Interrupt Input Mode"
111	 */
112
113	spin_lock_irqsave(&p->lock, flags);
114
115	/* Configure postive or negative logic in POSNEG */
116	gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
117
118	/* Configure edge or level trigger in EDGLEVEL */
119	gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
120
121	/* Select one edge or both edges in BOTHEDGE */
122	if (p->has_both_edge_trigger)
123		gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
124
125	/* Select "Interrupt Input Mode" in IOINTSEL */
126	gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
127
128	/* Write INTCLR in case of edge trigger */
129	if (!level_trigger)
130		gpio_rcar_write(p, INTCLR, BIT(hwirq));
131
132	spin_unlock_irqrestore(&p->lock, flags);
133}
134
135static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
136{
137	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
138	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
139	unsigned int hwirq = irqd_to_hwirq(d);
140
141	dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type);
142
143	switch (type & IRQ_TYPE_SENSE_MASK) {
144	case IRQ_TYPE_LEVEL_HIGH:
145		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
146						      false);
147		break;
148	case IRQ_TYPE_LEVEL_LOW:
149		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
150						      false);
151		break;
152	case IRQ_TYPE_EDGE_RISING:
153		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
154						      false);
155		break;
156	case IRQ_TYPE_EDGE_FALLING:
157		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
158						      false);
159		break;
160	case IRQ_TYPE_EDGE_BOTH:
161		if (!p->has_both_edge_trigger)
162			return -EINVAL;
163		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
164						      true);
165		break;
166	default:
167		return -EINVAL;
168	}
169	return 0;
170}
171
172static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
173{
174	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
175	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
176	int error;
177
178	if (p->irq_parent) {
179		error = irq_set_irq_wake(p->irq_parent, on);
180		if (error) {
181			dev_dbg(&p->pdev->dev,
182				"irq %u doesn't support irq_set_wake\n",
183				p->irq_parent);
184			p->irq_parent = 0;
185		}
186	}
187
188	if (!p->clk)
189		return 0;
190
191	if (on)
192		clk_enable(p->clk);
193	else
194		clk_disable(p->clk);
195
196	return 0;
197}
198
199static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
200{
201	struct gpio_rcar_priv *p = dev_id;
202	u32 pending;
203	unsigned int offset, irqs_handled = 0;
204
205	while ((pending = gpio_rcar_read(p, INTDT) &
206			  gpio_rcar_read(p, INTMSK))) {
207		offset = __ffs(pending);
208		gpio_rcar_write(p, INTCLR, BIT(offset));
209		generic_handle_irq(irq_find_mapping(p->gpio_chip.irqdomain,
210						    offset));
211		irqs_handled++;
212	}
213
214	return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
215}
216
217static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
218						       unsigned int gpio,
219						       bool output)
220{
221	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
222	unsigned long flags;
223
224	/* follow steps in the GPIO documentation for
225	 * "Setting General Output Mode" and
226	 * "Setting General Input Mode"
227	 */
228
229	spin_lock_irqsave(&p->lock, flags);
230
231	/* Configure postive logic in POSNEG */
232	gpio_rcar_modify_bit(p, POSNEG, gpio, false);
233
234	/* Select "General Input/Output Mode" in IOINTSEL */
235	gpio_rcar_modify_bit(p, IOINTSEL, gpio, false);
236
237	/* Select Input Mode or Output Mode in INOUTSEL */
238	gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
239
 
 
 
 
240	spin_unlock_irqrestore(&p->lock, flags);
241}
242
243static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
244{
245	return pinctrl_request_gpio(chip->base + offset);
 
 
 
 
 
 
 
 
 
 
 
 
 
246}
247
248static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
249{
250	pinctrl_free_gpio(chip->base + offset);
 
 
251
252	/*
253	 * Set the GPIO as an input to ensure that the next GPIO request won't
254	 * drive the GPIO pin as an output.
255	 */
256	gpio_rcar_config_general_input_output_mode(chip, offset, false);
 
 
 
 
 
 
 
 
 
 
 
 
257}
258
259static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
260{
261	gpio_rcar_config_general_input_output_mode(chip, offset, false);
262	return 0;
263}
264
265static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
266{
267	u32 bit = BIT(offset);
268
269	/* testing on r8a7790 shows that INDT does not show correct pin state
270	 * when configured as output, so use OUTDT in case of output pins */
271	if (gpio_rcar_read(gpiochip_get_data(chip), INOUTSEL) & bit)
272		return !!(gpio_rcar_read(gpiochip_get_data(chip), OUTDT) & bit);
273	else
274		return !!(gpio_rcar_read(gpiochip_get_data(chip), INDT) & bit);
275}
276
277static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
278{
279	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
280	unsigned long flags;
281
282	spin_lock_irqsave(&p->lock, flags);
283	gpio_rcar_modify_bit(p, OUTDT, offset, value);
284	spin_unlock_irqrestore(&p->lock, flags);
285}
286
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
287static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
288				      int value)
289{
290	/* write GPIO value to output before selecting output mode of pin */
291	gpio_rcar_set(chip, offset, value);
292	gpio_rcar_config_general_input_output_mode(chip, offset, true);
293	return 0;
294}
295
296struct gpio_rcar_info {
 
297	bool has_both_edge_trigger;
298	bool needs_clk;
299};
300
301static const struct gpio_rcar_info gpio_rcar_info_gen1 = {
 
302	.has_both_edge_trigger = false,
303	.needs_clk = false,
304};
305
306static const struct gpio_rcar_info gpio_rcar_info_gen2 = {
 
307	.has_both_edge_trigger = true,
308	.needs_clk = true,
309};
310
311static const struct of_device_id gpio_rcar_of_table[] = {
312	{
 
 
 
 
313		.compatible = "renesas,gpio-r8a7790",
314		.data = &gpio_rcar_info_gen2,
315	}, {
316		.compatible = "renesas,gpio-r8a7791",
317		.data = &gpio_rcar_info_gen2,
318	}, {
 
 
 
319		.compatible = "renesas,gpio-r8a7793",
320		.data = &gpio_rcar_info_gen2,
321	}, {
322		.compatible = "renesas,gpio-r8a7794",
323		.data = &gpio_rcar_info_gen2,
324	}, {
325		.compatible = "renesas,gpio-r8a7795",
326		/* Gen3 GPIO is identical to Gen2. */
327		.data = &gpio_rcar_info_gen2,
328	}, {
 
 
 
 
 
 
 
 
 
 
 
 
 
 
329		.compatible = "renesas,gpio-rcar",
330		.data = &gpio_rcar_info_gen1,
331	}, {
332		/* Terminator */
333	},
334};
335
336MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
337
338static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
339{
340	struct device_node *np = p->pdev->dev.of_node;
341	const struct of_device_id *match;
342	const struct gpio_rcar_info *info;
343	struct of_phandle_args args;
344	int ret;
345
346	match = of_match_node(gpio_rcar_of_table, np);
347	if (!match)
348		return -EINVAL;
349
350	info = match->data;
351
352	ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args);
353	*npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK;
354	p->has_both_edge_trigger = info->has_both_edge_trigger;
355	p->needs_clk = info->needs_clk;
356
357	if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) {
358		dev_warn(&p->pdev->dev,
359			 "Invalid number of gpio lines %u, using %u\n", *npins,
360			 RCAR_MAX_GPIO_PER_BANK);
361		*npins = RCAR_MAX_GPIO_PER_BANK;
362	}
363
364	return 0;
365}
366
367static int gpio_rcar_probe(struct platform_device *pdev)
368{
369	struct gpio_rcar_priv *p;
370	struct resource *io, *irq;
371	struct gpio_chip *gpio_chip;
372	struct irq_chip *irq_chip;
 
373	struct device *dev = &pdev->dev;
374	const char *name = dev_name(dev);
375	unsigned int npins;
376	int ret;
377
378	p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
379	if (!p)
380		return -ENOMEM;
381
382	p->pdev = pdev;
383	spin_lock_init(&p->lock);
384
385	/* Get device configuration from DT node */
386	ret = gpio_rcar_parse_dt(p, &npins);
387	if (ret < 0)
388		return ret;
389
390	platform_set_drvdata(pdev, p);
391
392	p->clk = devm_clk_get(dev, NULL);
393	if (IS_ERR(p->clk)) {
394		if (p->needs_clk) {
395			dev_err(dev, "unable to get clock\n");
396			ret = PTR_ERR(p->clk);
397			goto err0;
398		}
399		p->clk = NULL;
400	}
401
402	pm_runtime_enable(dev);
403	pm_runtime_get_sync(dev);
404
405	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
406	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
407
408	if (!io || !irq) {
409		dev_err(dev, "missing IRQ or IOMEM\n");
410		ret = -EINVAL;
411		goto err0;
412	}
413
414	p->base = devm_ioremap_nocache(dev, io->start, resource_size(io));
415	if (!p->base) {
416		dev_err(dev, "failed to remap I/O memory\n");
417		ret = -ENXIO;
418		goto err0;
419	}
420
421	gpio_chip = &p->gpio_chip;
422	gpio_chip->request = gpio_rcar_request;
423	gpio_chip->free = gpio_rcar_free;
 
424	gpio_chip->direction_input = gpio_rcar_direction_input;
425	gpio_chip->get = gpio_rcar_get;
426	gpio_chip->direction_output = gpio_rcar_direction_output;
427	gpio_chip->set = gpio_rcar_set;
 
428	gpio_chip->label = name;
429	gpio_chip->parent = dev;
430	gpio_chip->owner = THIS_MODULE;
431	gpio_chip->base = -1;
432	gpio_chip->ngpio = npins;
433
434	irq_chip = &p->irq_chip;
435	irq_chip->name = name;
 
436	irq_chip->irq_mask = gpio_rcar_irq_disable;
437	irq_chip->irq_unmask = gpio_rcar_irq_enable;
438	irq_chip->irq_set_type = gpio_rcar_irq_set_type;
439	irq_chip->irq_set_wake = gpio_rcar_irq_set_wake;
440	irq_chip->flags	= IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
 
 
 
 
 
 
 
 
 
441
442	ret = gpiochip_add_data(gpio_chip, p);
443	if (ret) {
444		dev_err(dev, "failed to add GPIO controller\n");
445		goto err0;
446	}
447
448	ret = gpiochip_irqchip_add(gpio_chip, irq_chip, 0, handle_level_irq,
449				   IRQ_TYPE_NONE);
450	if (ret) {
451		dev_err(dev, "cannot add irqchip\n");
452		goto err1;
453	}
454
455	p->irq_parent = irq->start;
456	if (devm_request_irq(dev, irq->start, gpio_rcar_irq_handler,
457			     IRQF_SHARED, name, p)) {
458		dev_err(dev, "failed to request IRQ\n");
459		ret = -ENOENT;
460		goto err1;
461	}
462
463	dev_info(dev, "driving %d GPIOs\n", npins);
464
465	return 0;
466
467err1:
468	gpiochip_remove(gpio_chip);
469err0:
470	pm_runtime_put(dev);
471	pm_runtime_disable(dev);
472	return ret;
473}
474
475static int gpio_rcar_remove(struct platform_device *pdev)
476{
477	struct gpio_rcar_priv *p = platform_get_drvdata(pdev);
478
479	gpiochip_remove(&p->gpio_chip);
480
481	pm_runtime_put(&pdev->dev);
482	pm_runtime_disable(&pdev->dev);
483	return 0;
484}
485
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
486static struct platform_driver gpio_rcar_device_driver = {
487	.probe		= gpio_rcar_probe,
488	.remove		= gpio_rcar_remove,
489	.driver		= {
490		.name	= "gpio_rcar",
 
491		.of_match_table = of_match_ptr(gpio_rcar_of_table),
492	}
493};
494
495module_platform_driver(gpio_rcar_device_driver);
496
497MODULE_AUTHOR("Magnus Damm");
498MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
499MODULE_LICENSE("GPL v2");
v5.9
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Renesas R-Car GPIO Support
  4 *
  5 *  Copyright (C) 2014 Renesas Electronics Corporation
  6 *  Copyright (C) 2013 Magnus Damm
 
 
 
 
 
 
 
 
 
  7 */
  8
 
  9#include <linux/err.h>
 10#include <linux/gpio/driver.h>
 11#include <linux/init.h>
 12#include <linux/interrupt.h>
 13#include <linux/io.h>
 14#include <linux/ioport.h>
 15#include <linux/irq.h>
 16#include <linux/module.h>
 17#include <linux/of.h>
 18#include <linux/of_device.h>
 19#include <linux/pinctrl/consumer.h>
 20#include <linux/platform_device.h>
 21#include <linux/pm_runtime.h>
 22#include <linux/spinlock.h>
 23#include <linux/slab.h>
 24
 25struct gpio_rcar_bank_info {
 26	u32 iointsel;
 27	u32 inoutsel;
 28	u32 outdt;
 29	u32 posneg;
 30	u32 edglevel;
 31	u32 bothedge;
 32	u32 intmsk;
 33};
 34
 35struct gpio_rcar_priv {
 36	void __iomem *base;
 37	spinlock_t lock;
 38	struct device *dev;
 39	struct gpio_chip gpio_chip;
 40	struct irq_chip irq_chip;
 
 41	unsigned int irq_parent;
 42	atomic_t wakeup_path;
 43	bool has_outdtsel;
 44	bool has_both_edge_trigger;
 45	struct gpio_rcar_bank_info bank_info;
 46};
 47
 48#define IOINTSEL 0x00	/* General IO/Interrupt Switching Register */
 49#define INOUTSEL 0x04	/* General Input/Output Switching Register */
 50#define OUTDT 0x08	/* General Output Register */
 51#define INDT 0x0c	/* General Input Register */
 52#define INTDT 0x10	/* Interrupt Display Register */
 53#define INTCLR 0x14	/* Interrupt Clear Register */
 54#define INTMSK 0x18	/* Interrupt Mask Register */
 55#define MSKCLR 0x1c	/* Interrupt Mask Clear Register */
 56#define POSNEG 0x20	/* Positive/Negative Logic Select Register */
 57#define EDGLEVEL 0x24	/* Edge/level Select Register */
 58#define FILONOFF 0x28	/* Chattering Prevention On/Off Register */
 59#define OUTDTSEL 0x40	/* Output Data Select Register */
 60#define BOTHEDGE 0x4c	/* One Edge/Both Edge Select Register */
 61
 62#define RCAR_MAX_GPIO_PER_BANK		32
 63
 64static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
 65{
 66	return ioread32(p->base + offs);
 67}
 68
 69static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs,
 70				   u32 value)
 71{
 72	iowrite32(value, p->base + offs);
 73}
 74
 75static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs,
 76				 int bit, bool value)
 77{
 78	u32 tmp = gpio_rcar_read(p, offs);
 79
 80	if (value)
 81		tmp |= BIT(bit);
 82	else
 83		tmp &= ~BIT(bit);
 84
 85	gpio_rcar_write(p, offs, tmp);
 86}
 87
 88static void gpio_rcar_irq_disable(struct irq_data *d)
 89{
 90	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 91	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
 92
 93	gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d)));
 94}
 95
 96static void gpio_rcar_irq_enable(struct irq_data *d)
 97{
 98	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 99	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
100
101	gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d)));
102}
103
104static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
105						  unsigned int hwirq,
106						  bool active_high_rising_edge,
107						  bool level_trigger,
108						  bool both)
109{
110	unsigned long flags;
111
112	/* follow steps in the GPIO documentation for
113	 * "Setting Edge-Sensitive Interrupt Input Mode" and
114	 * "Setting Level-Sensitive Interrupt Input Mode"
115	 */
116
117	spin_lock_irqsave(&p->lock, flags);
118
119	/* Configure positive or negative logic in POSNEG */
120	gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
121
122	/* Configure edge or level trigger in EDGLEVEL */
123	gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
124
125	/* Select one edge or both edges in BOTHEDGE */
126	if (p->has_both_edge_trigger)
127		gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
128
129	/* Select "Interrupt Input Mode" in IOINTSEL */
130	gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
131
132	/* Write INTCLR in case of edge trigger */
133	if (!level_trigger)
134		gpio_rcar_write(p, INTCLR, BIT(hwirq));
135
136	spin_unlock_irqrestore(&p->lock, flags);
137}
138
139static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
140{
141	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
142	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
143	unsigned int hwirq = irqd_to_hwirq(d);
144
145	dev_dbg(p->dev, "sense irq = %d, type = %d\n", hwirq, type);
146
147	switch (type & IRQ_TYPE_SENSE_MASK) {
148	case IRQ_TYPE_LEVEL_HIGH:
149		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
150						      false);
151		break;
152	case IRQ_TYPE_LEVEL_LOW:
153		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
154						      false);
155		break;
156	case IRQ_TYPE_EDGE_RISING:
157		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
158						      false);
159		break;
160	case IRQ_TYPE_EDGE_FALLING:
161		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
162						      false);
163		break;
164	case IRQ_TYPE_EDGE_BOTH:
165		if (!p->has_both_edge_trigger)
166			return -EINVAL;
167		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
168						      true);
169		break;
170	default:
171		return -EINVAL;
172	}
173	return 0;
174}
175
176static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
177{
178	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
179	struct gpio_rcar_priv *p = gpiochip_get_data(gc);
180	int error;
181
182	if (p->irq_parent) {
183		error = irq_set_irq_wake(p->irq_parent, on);
184		if (error) {
185			dev_dbg(p->dev, "irq %u doesn't support irq_set_wake\n",
 
186				p->irq_parent);
187			p->irq_parent = 0;
188		}
189	}
190
 
 
 
191	if (on)
192		atomic_inc(&p->wakeup_path);
193	else
194		atomic_dec(&p->wakeup_path);
195
196	return 0;
197}
198
199static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
200{
201	struct gpio_rcar_priv *p = dev_id;
202	u32 pending;
203	unsigned int offset, irqs_handled = 0;
204
205	while ((pending = gpio_rcar_read(p, INTDT) &
206			  gpio_rcar_read(p, INTMSK))) {
207		offset = __ffs(pending);
208		gpio_rcar_write(p, INTCLR, BIT(offset));
209		generic_handle_irq(irq_find_mapping(p->gpio_chip.irq.domain,
210						    offset));
211		irqs_handled++;
212	}
213
214	return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
215}
216
217static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
218						       unsigned int gpio,
219						       bool output)
220{
221	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
222	unsigned long flags;
223
224	/* follow steps in the GPIO documentation for
225	 * "Setting General Output Mode" and
226	 * "Setting General Input Mode"
227	 */
228
229	spin_lock_irqsave(&p->lock, flags);
230
231	/* Configure positive logic in POSNEG */
232	gpio_rcar_modify_bit(p, POSNEG, gpio, false);
233
234	/* Select "General Input/Output Mode" in IOINTSEL */
235	gpio_rcar_modify_bit(p, IOINTSEL, gpio, false);
236
237	/* Select Input Mode or Output Mode in INOUTSEL */
238	gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
239
240	/* Select General Output Register to output data in OUTDTSEL */
241	if (p->has_outdtsel && output)
242		gpio_rcar_modify_bit(p, OUTDTSEL, gpio, false);
243
244	spin_unlock_irqrestore(&p->lock, flags);
245}
246
247static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
248{
249	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
250	int error;
251
252	error = pm_runtime_get_sync(p->dev);
253	if (error < 0) {
254		pm_runtime_put(p->dev);
255		return error;
256	}
257
258	error = pinctrl_gpio_request(chip->base + offset);
259	if (error)
260		pm_runtime_put(p->dev);
261
262	return error;
263}
264
265static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
266{
267	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
268
269	pinctrl_gpio_free(chip->base + offset);
270
271	/*
272	 * Set the GPIO as an input to ensure that the next GPIO request won't
273	 * drive the GPIO pin as an output.
274	 */
275	gpio_rcar_config_general_input_output_mode(chip, offset, false);
276
277	pm_runtime_put(p->dev);
278}
279
280static int gpio_rcar_get_direction(struct gpio_chip *chip, unsigned int offset)
281{
282	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
283
284	if (gpio_rcar_read(p, INOUTSEL) & BIT(offset))
285		return GPIO_LINE_DIRECTION_OUT;
286
287	return GPIO_LINE_DIRECTION_IN;
288}
289
290static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
291{
292	gpio_rcar_config_general_input_output_mode(chip, offset, false);
293	return 0;
294}
295
296static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
297{
298	u32 bit = BIT(offset);
299
300	/* testing on r8a7790 shows that INDT does not show correct pin state
301	 * when configured as output, so use OUTDT in case of output pins */
302	if (gpio_rcar_read(gpiochip_get_data(chip), INOUTSEL) & bit)
303		return !!(gpio_rcar_read(gpiochip_get_data(chip), OUTDT) & bit);
304	else
305		return !!(gpio_rcar_read(gpiochip_get_data(chip), INDT) & bit);
306}
307
308static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
309{
310	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
311	unsigned long flags;
312
313	spin_lock_irqsave(&p->lock, flags);
314	gpio_rcar_modify_bit(p, OUTDT, offset, value);
315	spin_unlock_irqrestore(&p->lock, flags);
316}
317
318static void gpio_rcar_set_multiple(struct gpio_chip *chip, unsigned long *mask,
319				   unsigned long *bits)
320{
321	struct gpio_rcar_priv *p = gpiochip_get_data(chip);
322	unsigned long flags;
323	u32 val, bankmask;
324
325	bankmask = mask[0] & GENMASK(chip->ngpio - 1, 0);
326	if (chip->valid_mask)
327		bankmask &= chip->valid_mask[0];
328
329	if (!bankmask)
330		return;
331
332	spin_lock_irqsave(&p->lock, flags);
333	val = gpio_rcar_read(p, OUTDT);
334	val &= ~bankmask;
335	val |= (bankmask & bits[0]);
336	gpio_rcar_write(p, OUTDT, val);
337	spin_unlock_irqrestore(&p->lock, flags);
338}
339
340static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
341				      int value)
342{
343	/* write GPIO value to output before selecting output mode of pin */
344	gpio_rcar_set(chip, offset, value);
345	gpio_rcar_config_general_input_output_mode(chip, offset, true);
346	return 0;
347}
348
349struct gpio_rcar_info {
350	bool has_outdtsel;
351	bool has_both_edge_trigger;
 
352};
353
354static const struct gpio_rcar_info gpio_rcar_info_gen1 = {
355	.has_outdtsel = false,
356	.has_both_edge_trigger = false,
 
357};
358
359static const struct gpio_rcar_info gpio_rcar_info_gen2 = {
360	.has_outdtsel = true,
361	.has_both_edge_trigger = true,
 
362};
363
364static const struct of_device_id gpio_rcar_of_table[] = {
365	{
366		.compatible = "renesas,gpio-r8a7743",
367		/* RZ/G1 GPIO is identical to R-Car Gen2. */
368		.data = &gpio_rcar_info_gen2,
369	}, {
370		.compatible = "renesas,gpio-r8a7790",
371		.data = &gpio_rcar_info_gen2,
372	}, {
373		.compatible = "renesas,gpio-r8a7791",
374		.data = &gpio_rcar_info_gen2,
375	}, {
376		.compatible = "renesas,gpio-r8a7792",
377		.data = &gpio_rcar_info_gen2,
378	}, {
379		.compatible = "renesas,gpio-r8a7793",
380		.data = &gpio_rcar_info_gen2,
381	}, {
382		.compatible = "renesas,gpio-r8a7794",
383		.data = &gpio_rcar_info_gen2,
384	}, {
385		.compatible = "renesas,gpio-r8a7795",
386		/* Gen3 GPIO is identical to Gen2. */
387		.data = &gpio_rcar_info_gen2,
388	}, {
389		.compatible = "renesas,gpio-r8a7796",
390		/* Gen3 GPIO is identical to Gen2. */
391		.data = &gpio_rcar_info_gen2,
392	}, {
393		.compatible = "renesas,rcar-gen1-gpio",
394		.data = &gpio_rcar_info_gen1,
395	}, {
396		.compatible = "renesas,rcar-gen2-gpio",
397		.data = &gpio_rcar_info_gen2,
398	}, {
399		.compatible = "renesas,rcar-gen3-gpio",
400		/* Gen3 GPIO is identical to Gen2. */
401		.data = &gpio_rcar_info_gen2,
402	}, {
403		.compatible = "renesas,gpio-rcar",
404		.data = &gpio_rcar_info_gen1,
405	}, {
406		/* Terminator */
407	},
408};
409
410MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
411
412static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
413{
414	struct device_node *np = p->dev->of_node;
 
415	const struct gpio_rcar_info *info;
416	struct of_phandle_args args;
417	int ret;
418
419	info = of_device_get_match_data(p->dev);
420	p->has_outdtsel = info->has_outdtsel;
421	p->has_both_edge_trigger = info->has_both_edge_trigger;
 
 
422
423	ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args);
424	*npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK;
 
 
425
426	if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) {
427		dev_warn(p->dev, "Invalid number of gpio lines %u, using %u\n",
428			 *npins, RCAR_MAX_GPIO_PER_BANK);
 
429		*npins = RCAR_MAX_GPIO_PER_BANK;
430	}
431
432	return 0;
433}
434
435static int gpio_rcar_probe(struct platform_device *pdev)
436{
437	struct gpio_rcar_priv *p;
438	struct resource *irq;
439	struct gpio_chip *gpio_chip;
440	struct irq_chip *irq_chip;
441	struct gpio_irq_chip *girq;
442	struct device *dev = &pdev->dev;
443	const char *name = dev_name(dev);
444	unsigned int npins;
445	int ret;
446
447	p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
448	if (!p)
449		return -ENOMEM;
450
451	p->dev = dev;
452	spin_lock_init(&p->lock);
453
454	/* Get device configuration from DT node */
455	ret = gpio_rcar_parse_dt(p, &npins);
456	if (ret < 0)
457		return ret;
458
459	platform_set_drvdata(pdev, p);
460
 
 
 
 
 
 
 
 
 
 
461	pm_runtime_enable(dev);
 
462
 
463	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
464	if (!irq) {
465		dev_err(dev, "missing IRQ\n");
 
466		ret = -EINVAL;
467		goto err0;
468	}
469
470	p->base = devm_platform_ioremap_resource(pdev, 0);
471	if (IS_ERR(p->base)) {
472		ret = PTR_ERR(p->base);
 
473		goto err0;
474	}
475
476	gpio_chip = &p->gpio_chip;
477	gpio_chip->request = gpio_rcar_request;
478	gpio_chip->free = gpio_rcar_free;
479	gpio_chip->get_direction = gpio_rcar_get_direction;
480	gpio_chip->direction_input = gpio_rcar_direction_input;
481	gpio_chip->get = gpio_rcar_get;
482	gpio_chip->direction_output = gpio_rcar_direction_output;
483	gpio_chip->set = gpio_rcar_set;
484	gpio_chip->set_multiple = gpio_rcar_set_multiple;
485	gpio_chip->label = name;
486	gpio_chip->parent = dev;
487	gpio_chip->owner = THIS_MODULE;
488	gpio_chip->base = -1;
489	gpio_chip->ngpio = npins;
490
491	irq_chip = &p->irq_chip;
492	irq_chip->name = "gpio-rcar";
493	irq_chip->parent_device = dev;
494	irq_chip->irq_mask = gpio_rcar_irq_disable;
495	irq_chip->irq_unmask = gpio_rcar_irq_enable;
496	irq_chip->irq_set_type = gpio_rcar_irq_set_type;
497	irq_chip->irq_set_wake = gpio_rcar_irq_set_wake;
498	irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
499
500	girq = &gpio_chip->irq;
501	girq->chip = irq_chip;
502	/* This will let us handle the parent IRQ in the driver */
503	girq->parent_handler = NULL;
504	girq->num_parents = 0;
505	girq->parents = NULL;
506	girq->default_type = IRQ_TYPE_NONE;
507	girq->handler = handle_level_irq;
508
509	ret = gpiochip_add_data(gpio_chip, p);
510	if (ret) {
511		dev_err(dev, "failed to add GPIO controller\n");
512		goto err0;
513	}
514
 
 
 
 
 
 
 
515	p->irq_parent = irq->start;
516	if (devm_request_irq(dev, irq->start, gpio_rcar_irq_handler,
517			     IRQF_SHARED, name, p)) {
518		dev_err(dev, "failed to request IRQ\n");
519		ret = -ENOENT;
520		goto err1;
521	}
522
523	dev_info(dev, "driving %d GPIOs\n", npins);
524
525	return 0;
526
527err1:
528	gpiochip_remove(gpio_chip);
529err0:
 
530	pm_runtime_disable(dev);
531	return ret;
532}
533
534static int gpio_rcar_remove(struct platform_device *pdev)
535{
536	struct gpio_rcar_priv *p = platform_get_drvdata(pdev);
537
538	gpiochip_remove(&p->gpio_chip);
539
 
540	pm_runtime_disable(&pdev->dev);
541	return 0;
542}
543
544#ifdef CONFIG_PM_SLEEP
545static int gpio_rcar_suspend(struct device *dev)
546{
547	struct gpio_rcar_priv *p = dev_get_drvdata(dev);
548
549	p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL);
550	p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL);
551	p->bank_info.outdt = gpio_rcar_read(p, OUTDT);
552	p->bank_info.intmsk = gpio_rcar_read(p, INTMSK);
553	p->bank_info.posneg = gpio_rcar_read(p, POSNEG);
554	p->bank_info.edglevel = gpio_rcar_read(p, EDGLEVEL);
555	if (p->has_both_edge_trigger)
556		p->bank_info.bothedge = gpio_rcar_read(p, BOTHEDGE);
557
558	if (atomic_read(&p->wakeup_path))
559		device_set_wakeup_path(dev);
560
561	return 0;
562}
563
564static int gpio_rcar_resume(struct device *dev)
565{
566	struct gpio_rcar_priv *p = dev_get_drvdata(dev);
567	unsigned int offset;
568	u32 mask;
569
570	for (offset = 0; offset < p->gpio_chip.ngpio; offset++) {
571		if (!gpiochip_line_is_valid(&p->gpio_chip, offset))
572			continue;
573
574		mask = BIT(offset);
575		/* I/O pin */
576		if (!(p->bank_info.iointsel & mask)) {
577			if (p->bank_info.inoutsel & mask)
578				gpio_rcar_direction_output(
579					&p->gpio_chip, offset,
580					!!(p->bank_info.outdt & mask));
581			else
582				gpio_rcar_direction_input(&p->gpio_chip,
583							  offset);
584		} else {
585			/* Interrupt pin */
586			gpio_rcar_config_interrupt_input_mode(
587				p,
588				offset,
589				!(p->bank_info.posneg & mask),
590				!(p->bank_info.edglevel & mask),
591				!!(p->bank_info.bothedge & mask));
592
593			if (p->bank_info.intmsk & mask)
594				gpio_rcar_write(p, MSKCLR, mask);
595		}
596	}
597
598	return 0;
599}
600#endif /* CONFIG_PM_SLEEP*/
601
602static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend, gpio_rcar_resume);
603
604static struct platform_driver gpio_rcar_device_driver = {
605	.probe		= gpio_rcar_probe,
606	.remove		= gpio_rcar_remove,
607	.driver		= {
608		.name	= "gpio_rcar",
609		.pm     = &gpio_rcar_pm_ops,
610		.of_match_table = of_match_ptr(gpio_rcar_of_table),
611	}
612};
613
614module_platform_driver(gpio_rcar_device_driver);
615
616MODULE_AUTHOR("Magnus Damm");
617MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
618MODULE_LICENSE("GPL v2");