Loading...
1#
2# USB Storage driver configuration
3#
4
5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6comment "also be needed; see USB_STORAGE Help for more info"
7
8config USB_STORAGE
9 tristate "USB Mass Storage support"
10 depends on SCSI
11 ---help---
12 Say Y here if you want to connect USB mass storage devices to your
13 computer's USB port. This is the driver you need for USB
14 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
15 USB flash devices, and memory sticks, along with
16 similar devices. This driver may also be used for some cameras
17 and card readers.
18
19 This option depends on 'SCSI' support being enabled, but you
20 probably also need 'SCSI device support: SCSI disk support'
21 (BLK_DEV_SD) for most USB storage devices.
22
23 To compile this driver as a module, choose M here: the
24 module will be called usb-storage.
25
26config USB_STORAGE_DEBUG
27 bool "USB Mass Storage verbose debug"
28 depends on USB_STORAGE
29 help
30 Say Y here in order to have the USB Mass Storage code generate
31 verbose debugging messages.
32
33config USB_STORAGE_REALTEK
34 tristate "Realtek Card Reader support"
35 depends on USB_STORAGE
36 help
37 Say Y here to include additional code to support the power-saving function
38 for Realtek RTS51xx USB card readers.
39
40 If this driver is compiled as a module, it will be named ums-realtek.
41
42config REALTEK_AUTOPM
43 bool "Realtek Card Reader autosuspend support"
44 depends on USB_STORAGE_REALTEK && PM
45 default y
46
47config USB_STORAGE_DATAFAB
48 tristate "Datafab Compact Flash Reader support"
49 depends on USB_STORAGE
50 help
51 Support for certain Datafab CompactFlash readers.
52 Datafab has a web page at <http://www.datafab.com/>.
53
54 If this driver is compiled as a module, it will be named ums-datafab.
55
56config USB_STORAGE_FREECOM
57 tristate "Freecom USB/ATAPI Bridge support"
58 depends on USB_STORAGE
59 help
60 Support for the Freecom USB to IDE/ATAPI adaptor.
61 Freecom has a web page at <http://www.freecom.de/>.
62
63 If this driver is compiled as a module, it will be named ums-freecom.
64
65config USB_STORAGE_ISD200
66 tristate "ISD-200 USB/ATA Bridge support"
67 depends on USB_STORAGE
68 ---help---
69 Say Y here if you want to use USB Mass Store devices based
70 on the In-Systems Design ISD-200 USB/ATA bridge.
71
72 Some of the products that use this chip are:
73
74 - Archos Jukebox 6000
75 - ISD SmartCable for Storage
76 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
77 - Sony CRX10U CD-R/RW drive
78 - CyQ've CQ8060A CDRW drive
79 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
80
81 If this driver is compiled as a module, it will be named ums-isd200.
82
83config USB_STORAGE_USBAT
84 tristate "USBAT/USBAT02-based storage support"
85 depends on USB_STORAGE
86 help
87 Say Y here to include additional code to support storage devices
88 based on the SCM/Shuttle USBAT/USBAT02 processors.
89
90 Devices reported to work with this driver include:
91 - CompactFlash reader included with Kodak DC3800 camera
92 - Dane-Elec Zmate CompactFlash reader
93 - Delkin Efilm reader2
94 - HP 8200e/8210e/8230e CD-Writer Plus drives
95 - I-JAM JS-50U
96 - Jessops CompactFlash JESDCFRU BLACK
97 - Kingston Technology PCREAD-USB/CF
98 - Maxell UA4 CompactFlash reader
99 - Memorex UCF-100
100 - Microtech ZiO! ICS-45 CF2
101 - RCA LYRA MP3 portable
102 - Sandisk ImageMate SDDR-05b
103
104 If this driver is compiled as a module, it will be named ums-usbat.
105
106config USB_STORAGE_SDDR09
107 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
108 depends on USB_STORAGE
109 help
110 Say Y here to include additional code to support the Sandisk SDDR-09
111 SmartMedia reader in the USB Mass Storage driver.
112 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
113
114 If this driver is compiled as a module, it will be named ums-sddr09.
115
116config USB_STORAGE_SDDR55
117 tristate "SanDisk SDDR-55 SmartMedia support"
118 depends on USB_STORAGE
119 help
120 Say Y here to include additional code to support the Sandisk SDDR-55
121 SmartMedia reader in the USB Mass Storage driver.
122
123 If this driver is compiled as a module, it will be named ums-sddr55.
124
125config USB_STORAGE_JUMPSHOT
126 tristate "Lexar Jumpshot Compact Flash Reader"
127 depends on USB_STORAGE
128 help
129 Say Y here to include additional code to support the Lexar Jumpshot
130 USB CompactFlash reader.
131
132 If this driver is compiled as a module, it will be named ums-jumpshot.
133
134config USB_STORAGE_ALAUDA
135 tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
136 depends on USB_STORAGE
137 help
138 Say Y here to include additional code to support the Olympus MAUSB-10
139 and Fujifilm DPC-R1 USB Card reader/writer devices.
140
141 These devices are based on the Alauda chip and support both
142 XD and SmartMedia cards.
143
144 If this driver is compiled as a module, it will be named ums-alauda.
145
146config USB_STORAGE_ONETOUCH
147 tristate "Support OneTouch Button on Maxtor Hard Drives"
148 depends on USB_STORAGE
149 depends on INPUT=y || INPUT=USB_STORAGE
150 help
151 Say Y here to include additional code to support the Maxtor OneTouch
152 USB hard drive's onetouch button.
153
154 This code registers the button on the front of Maxtor OneTouch USB
155 hard drive's as an input device. An action can be associated with
156 this input in any keybinding software. (e.g. gnome's keyboard short-
157 cuts)
158
159 If this driver is compiled as a module, it will be named ums-onetouch.
160
161config USB_STORAGE_KARMA
162 tristate "Support for Rio Karma music player"
163 depends on USB_STORAGE
164 help
165 Say Y here to include additional code to support the Rio Karma
166 USB interface.
167
168 This code places the Rio Karma into mass storage mode, enabling
169 it to be mounted as an ordinary filesystem. Performing an eject
170 on the resulting scsi device node returns the Karma to normal
171 operation.
172
173 If this driver is compiled as a module, it will be named ums-karma.
174
175config USB_STORAGE_CYPRESS_ATACB
176 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
177 depends on USB_STORAGE
178 ---help---
179 Say Y here if you want to use SAT (ata pass through) on devices based
180 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
181 to use tools to tune and monitor your drive (like hdparm or smartctl).
182
183 If you say no here your device will still work with the standard usb
184 mass storage class.
185
186 If this driver is compiled as a module, it will be named ums-cypress.
187
188config USB_STORAGE_ENE_UB6250
189 tristate "USB ENE card reader support"
190 depends on SCSI
191 depends on USB_STORAGE
192 ---help---
193 Say Y here if you wish to control a ENE SD/MS Card reader.
194 Note that this driver does not support SM cards.
195
196 This option depends on 'SCSI' support being enabled, but you
197 probably also need 'SCSI device support: SCSI disk support'
198 (BLK_DEV_SD) for most USB storage devices.
199
200 To compile this driver as a module, choose M here: the
201 module will be called ums-eneub6250.
202
203config USB_UAS
204 tristate "USB Attached SCSI"
205 depends on SCSI && USB_STORAGE
206 help
207 The USB Attached SCSI protocol is supported by some USB
208 storage devices. It permits higher performance by supporting
209 multiple outstanding commands.
210
211 If you don't know whether you have a UAS device, it is safe to
212 say 'Y' or 'M' here and the kernel will use the right driver.
213
214 If you compile this driver as a module, it will be named uas.
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Storage driver configuration
4#
5
6comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
7comment "also be needed; see USB_STORAGE Help for more info"
8
9config USB_STORAGE
10 tristate "USB Mass Storage support"
11 depends on SCSI
12 ---help---
13 Say Y here if you want to connect USB mass storage devices to your
14 computer's USB port. This is the driver you need for USB
15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
16 USB flash devices, and memory sticks, along with
17 similar devices. This driver may also be used for some cameras
18 and card readers.
19
20 This option depends on 'SCSI' support being enabled, but you
21 probably also need 'SCSI device support: SCSI disk support'
22 (BLK_DEV_SD) for most USB storage devices.
23
24 To compile this driver as a module, choose M here: the
25 module will be called usb-storage.
26
27if USB_STORAGE
28
29config USB_STORAGE_DEBUG
30 bool "USB Mass Storage verbose debug"
31 help
32 Say Y here in order to have the USB Mass Storage code generate
33 verbose debugging messages.
34
35config USB_STORAGE_REALTEK
36 tristate "Realtek Card Reader support"
37 help
38 Say Y here to include additional code to support the power-saving function
39 for Realtek RTS51xx USB card readers.
40
41 If this driver is compiled as a module, it will be named ums-realtek.
42
43config REALTEK_AUTOPM
44 bool "Realtek Card Reader autosuspend support"
45 depends on USB_STORAGE_REALTEK && PM
46 default y
47
48config USB_STORAGE_DATAFAB
49 tristate "Datafab Compact Flash Reader support"
50 help
51 Support for certain Datafab CompactFlash readers.
52 Datafab has a web page at <http://www.datafab.com/>.
53
54 If this driver is compiled as a module, it will be named ums-datafab.
55
56config USB_STORAGE_FREECOM
57 tristate "Freecom USB/ATAPI Bridge support"
58 help
59 Support for the Freecom USB to IDE/ATAPI adaptor.
60 Freecom has a web page at <http://www.freecom.de/>.
61
62 If this driver is compiled as a module, it will be named ums-freecom.
63
64config USB_STORAGE_ISD200
65 tristate "ISD-200 USB/ATA Bridge support"
66 ---help---
67 Say Y here if you want to use USB Mass Store devices based
68 on the In-Systems Design ISD-200 USB/ATA bridge.
69
70 Some of the products that use this chip are:
71
72 - Archos Jukebox 6000
73 - ISD SmartCable for Storage
74 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
75 - Sony CRX10U CD-R/RW drive
76 - CyQ've CQ8060A CDRW drive
77 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
78
79 If this driver is compiled as a module, it will be named ums-isd200.
80
81config USB_STORAGE_USBAT
82 tristate "USBAT/USBAT02-based storage support"
83 help
84 Say Y here to include additional code to support storage devices
85 based on the SCM/Shuttle USBAT/USBAT02 processors.
86
87 Devices reported to work with this driver include:
88 - CompactFlash reader included with Kodak DC3800 camera
89 - Dane-Elec Zmate CompactFlash reader
90 - Delkin Efilm reader2
91 - HP 8200e/8210e/8230e CD-Writer Plus drives
92 - I-JAM JS-50U
93 - Jessops CompactFlash JESDCFRU BLACK
94 - Kingston Technology PCREAD-USB/CF
95 - Maxell UA4 CompactFlash reader
96 - Memorex UCF-100
97 - Microtech ZiO! ICS-45 CF2
98 - RCA LYRA MP3 portable
99 - Sandisk ImageMate SDDR-05b
100
101 If this driver is compiled as a module, it will be named ums-usbat.
102
103config USB_STORAGE_SDDR09
104 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
105 help
106 Say Y here to include additional code to support the Sandisk SDDR-09
107 SmartMedia reader in the USB Mass Storage driver.
108 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
109
110 If this driver is compiled as a module, it will be named ums-sddr09.
111
112config USB_STORAGE_SDDR55
113 tristate "SanDisk SDDR-55 SmartMedia support"
114 help
115 Say Y here to include additional code to support the Sandisk SDDR-55
116 SmartMedia reader in the USB Mass Storage driver.
117
118 If this driver is compiled as a module, it will be named ums-sddr55.
119
120config USB_STORAGE_JUMPSHOT
121 tristate "Lexar Jumpshot Compact Flash Reader"
122 help
123 Say Y here to include additional code to support the Lexar Jumpshot
124 USB CompactFlash reader.
125
126 If this driver is compiled as a module, it will be named ums-jumpshot.
127
128config USB_STORAGE_ALAUDA
129 tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
130 help
131 Say Y here to include additional code to support the Olympus MAUSB-10
132 and Fujifilm DPC-R1 USB Card reader/writer devices.
133
134 These devices are based on the Alauda chip and support both
135 XD and SmartMedia cards.
136
137 If this driver is compiled as a module, it will be named ums-alauda.
138
139config USB_STORAGE_ONETOUCH
140 tristate "Support OneTouch Button on Maxtor Hard Drives"
141 depends on INPUT=y || INPUT=USB_STORAGE
142 help
143 Say Y here to include additional code to support the Maxtor OneTouch
144 USB hard drive's onetouch button.
145
146 This code registers the button on the front of Maxtor OneTouch USB
147 hard drive's as an input device. An action can be associated with
148 this input in any keybinding software. (e.g. gnome's keyboard short-
149 cuts)
150
151 If this driver is compiled as a module, it will be named ums-onetouch.
152
153config USB_STORAGE_KARMA
154 tristate "Support for Rio Karma music player"
155 help
156 Say Y here to include additional code to support the Rio Karma
157 USB interface.
158
159 This code places the Rio Karma into mass storage mode, enabling
160 it to be mounted as an ordinary filesystem. Performing an eject
161 on the resulting scsi device node returns the Karma to normal
162 operation.
163
164 If this driver is compiled as a module, it will be named ums-karma.
165
166config USB_STORAGE_CYPRESS_ATACB
167 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
168 ---help---
169 Say Y here if you want to use SAT (ata pass through) on devices based
170 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
171 to use tools to tune and monitor your drive (like hdparm or smartctl).
172
173 If you say no here your device will still work with the standard usb
174 mass storage class.
175
176 If this driver is compiled as a module, it will be named ums-cypress.
177
178config USB_STORAGE_ENE_UB6250
179 tristate "USB ENE card reader support"
180 ---help---
181 Say Y here if you wish to control a ENE SD/MS Card reader.
182 Note that this driver does not support SM cards.
183
184 To compile this driver as a module, choose M here: the
185 module will be called ums-eneub6250.
186
187endif # USB_STORAGE
188
189config USB_UAS
190 tristate "USB Attached SCSI"
191 depends on SCSI && USB_STORAGE
192 help
193 The USB Attached SCSI protocol is supported by some USB
194 storage devices. It permits higher performance by supporting
195 multiple outstanding commands.
196
197 If you don't know whether you have a UAS device, it is safe to
198 say 'Y' or 'M' here and the kernel will use the right driver.
199
200 If you compile this driver as a module, it will be named uas.