1/*
  2 * OHCI HCD (Host Controller Driver) for USB.
  3 *
  4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
  6 * (C) Copyright 2002 Hewlett-Packard Company
  7 *
  8 * SA1111 Bus Glue
  9 *
 10 * Written by Christopher Hoover <ch@hpl.hp.com>
 11 * Based on fragments of previous driver by Russell King et al.
 12 *
 13 * This file is licenced under the GPL.
 14 */
 15
 16#include <mach/hardware.h>
 17#include <asm/mach-types.h>
 18#include <mach/assabet.h>
 19#include <asm/hardware/sa1111.h>
 20
 21#ifndef CONFIG_SA1111
 22#error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
 23#endif
 24
 25#define USB_STATUS	0x0118
 26#define USB_RESET	0x011c
 27#define USB_IRQTEST	0x0120
 28
 29#define USB_RESET_FORCEIFRESET	(1 << 0)
 30#define USB_RESET_FORCEHCRESET	(1 << 1)
 31#define USB_RESET_CLKGENRESET	(1 << 2)
 32#define USB_RESET_SIMSCALEDOWN	(1 << 3)
 33#define USB_RESET_USBINTTEST	(1 << 4)
 34#define USB_RESET_SLEEPSTBYEN	(1 << 5)
 35#define USB_RESET_PWRSENSELOW	(1 << 6)
 36#define USB_RESET_PWRCTRLLOW	(1 << 7)
 37
 38#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
 39#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
 40#define USB_STATUS_NIRQHCIM       (1 <<  9)
 41#define USB_STATUS_NHCIMFCLR      (1 << 10)
 42#define USB_STATUS_USBPWRSENSE    (1 << 11)
 43
 44#if 0
 45static void dump_hci_status(struct usb_hcd *hcd, const char *label)
 46{
 47	unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
 48
 49	printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
 50	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
 51	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
 52	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
 53	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
 54	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
 55}
 56#endif
 57
 58static int ohci_sa1111_reset(struct usb_hcd *hcd)
 59{
 60	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 61
 62	ohci_hcd_init(ohci);
 63	return ohci_init(ohci);
 64}
 65
 66static int ohci_sa1111_start(struct usb_hcd *hcd)
 67{
 68	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
 69	int ret;
 70
 71	ret = ohci_run(ohci);
 72	if (ret < 0) {
 73		ohci_err(ohci, "can't start\n");
 74		ohci_stop(hcd);
 75	}
 76	return ret;
 77}
 78
 79static const struct hc_driver ohci_sa1111_hc_driver = {
 80	.description =		hcd_name,
 81	.product_desc =		"SA-1111 OHCI",
 82	.hcd_priv_size =	sizeof(struct ohci_hcd),
 83
 84	/*
 85	 * generic hardware linkage
 86	 */
 87	.irq =			ohci_irq,
 88	.flags =		HCD_USB11 | HCD_MEMORY,
 89
 90	/*
 91	 * basic lifecycle operations
 92	 */
 93	.reset =		ohci_sa1111_reset,
 94	.start =		ohci_sa1111_start,
 95	.stop =			ohci_stop,
 96	.shutdown =		ohci_shutdown,
 97
 98	/*
 99	 * managing i/o requests and associated device resources
100	 */
101	.urb_enqueue =		ohci_urb_enqueue,
102	.urb_dequeue =		ohci_urb_dequeue,
103	.endpoint_disable =	ohci_endpoint_disable,
104
105	/*
106	 * scheduling support
107	 */
108	.get_frame_number =	ohci_get_frame,
109
110	/*
111	 * root hub support
112	 */
113	.hub_status_data =	ohci_hub_status_data,
114	.hub_control =		ohci_hub_control,
115#ifdef	CONFIG_PM
116	.bus_suspend =		ohci_bus_suspend,
117	.bus_resume =		ohci_bus_resume,
118#endif
119	.start_port_reset =	ohci_start_port_reset,
120};
121
122static int sa1111_start_hc(struct sa1111_dev *dev)
123{
124	unsigned int usb_rst = 0;
125	int ret;
126
127	dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
128
129	if (machine_is_xp860() ||
130	    machine_has_neponset() ||
131	    machine_is_pfs168() ||
132	    machine_is_badge4())
133		usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
134
135	/*
136	 * Configure the power sense and control lines.  Place the USB
137	 * host controller in reset.
138	 */
139	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
140		      dev->mapbase + USB_RESET);
141
142	/*
143	 * Now, carefully enable the USB clock, and take
144	 * the USB host controller out of reset.
145	 */
146	ret = sa1111_enable_device(dev);
147	if (ret == 0) {
148		udelay(11);
149		sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
150	}
151
152	return ret;
153}
154
155static void sa1111_stop_hc(struct sa1111_dev *dev)
156{
157	unsigned int usb_rst;
158
159	dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
160
161	/*
162	 * Put the USB host controller into reset.
163	 */
164	usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
165	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
166		      dev->mapbase + USB_RESET);
167
168	/*
169	 * Stop the USB clock.
170	 */
171	sa1111_disable_device(dev);
172}
173
174/**
175 * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
176 *
177 * Allocates basic resources for this USB host controller, and
178 * then invokes the start() method for the HCD associated with it.
179 */
180static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
181{
182	struct usb_hcd *hcd;
183	int ret;
184
185	if (usb_disabled())
186		return -ENODEV;
187
188	/*
189	 * We don't call dma_set_mask_and_coherent() here because the
190	 * DMA mask has already been appropraitely setup by the core
191	 * SA-1111 bus code (which includes bug workarounds.)
192	 */
193
194	hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
195	if (!hcd)
196		return -ENOMEM;
197
198	hcd->rsrc_start = dev->res.start;
199	hcd->rsrc_len = resource_size(&dev->res);
200
 
 
 
 
 
 
201	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
202		dev_dbg(&dev->dev, "request_mem_region failed\n");
203		ret = -EBUSY;
204		goto err1;
205	}
206
207	hcd->regs = dev->mapbase;
208
209	ret = sa1111_start_hc(dev);
210	if (ret)
211		goto err2;
212
213	ret = usb_add_hcd(hcd, dev->irq[1], 0);
214	if (ret == 0) {
215		device_wakeup_enable(hcd->self.controller);
216		return ret;
217	}
218
219	sa1111_stop_hc(dev);
220 err2:
221	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
222 err1:
223	usb_put_hcd(hcd);
224	return ret;
225}
226
227/**
228 * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
229 * @dev: USB Host Controller being removed
230 *
231 * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
232 * the HCD's stop() method.
233 */
234static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
235{
236	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
237
238	usb_remove_hcd(hcd);
239	sa1111_stop_hc(dev);
240	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
241	usb_put_hcd(hcd);
242
243	return 0;
244}
245
246static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
247{
 
248	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
249
250	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
251		hcd->driver->shutdown(hcd);
252		sa1111_stop_hc(dev);
253	}
254}
255
256static struct sa1111_driver ohci_hcd_sa1111_driver = {
257	.drv = {
258		.name	= "sa1111-ohci",
259		.owner	= THIS_MODULE,
 
260	},
261	.devid		= SA1111_DEVID_USB,
262	.probe		= ohci_hcd_sa1111_probe,
263	.remove		= ohci_hcd_sa1111_remove,
264	.shutdown	= ohci_hcd_sa1111_shutdown,
265};

  1// SPDX-License-Identifier: GPL-1.0+
  2/*
  3 * OHCI HCD (Host Controller Driver) for USB.
  4 *
  5 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  6 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
  7 * (C) Copyright 2002 Hewlett-Packard Company
  8 *
  9 * SA1111 Bus Glue
 10 *
 11 * Written by Christopher Hoover <ch@hpl.hp.com>
 12 * Based on fragments of previous driver by Russell King et al.
 13 *
 14 * This file is licenced under the GPL.
 15 */
 16
 
 17#include <asm/mach-types.h>
 
 18#include <asm/hardware/sa1111.h>
 19
 20#ifndef CONFIG_SA1111
 21#error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
 22#endif
 23
 24#define USB_STATUS	0x0118
 25#define USB_RESET	0x011c
 26#define USB_IRQTEST	0x0120
 27
 28#define USB_RESET_FORCEIFRESET	(1 << 0)
 29#define USB_RESET_FORCEHCRESET	(1 << 1)
 30#define USB_RESET_CLKGENRESET	(1 << 2)
 31#define USB_RESET_SIMSCALEDOWN	(1 << 3)
 32#define USB_RESET_USBINTTEST	(1 << 4)
 33#define USB_RESET_SLEEPSTBYEN	(1 << 5)
 34#define USB_RESET_PWRSENSELOW	(1 << 6)
 35#define USB_RESET_PWRCTRLLOW	(1 << 7)
 36
 37#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
 38#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
 39#define USB_STATUS_NIRQHCIM       (1 <<  9)
 40#define USB_STATUS_NHCIMFCLR      (1 << 10)
 41#define USB_STATUS_USBPWRSENSE    (1 << 11)
 42
 43#if 0
 44static void dump_hci_status(struct usb_hcd *hcd, const char *label)
 45{
 46	unsigned long status = readl_relaxed(hcd->regs + USB_STATUS);
 47
 48	printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
 49	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
 50	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
 51	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
 52	     ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
 53	     ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
 54}
 55#endif
 56
 57static int ohci_sa1111_reset(struct usb_hcd *hcd)
 58{
 59	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 60
 61	ohci_hcd_init(ohci);
 62	return ohci_init(ohci);
 63}
 64
 65static int ohci_sa1111_start(struct usb_hcd *hcd)
 66{
 67	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
 68	int ret;
 69
 70	ret = ohci_run(ohci);
 71	if (ret < 0) {
 72		ohci_err(ohci, "can't start\n");
 73		ohci_stop(hcd);
 74	}
 75	return ret;
 76}
 77
 78static const struct hc_driver ohci_sa1111_hc_driver = {
 79	.description =		hcd_name,
 80	.product_desc =		"SA-1111 OHCI",
 81	.hcd_priv_size =	sizeof(struct ohci_hcd),
 82
 83	/*
 84	 * generic hardware linkage
 85	 */
 86	.irq =			ohci_irq,
 87	.flags =		HCD_USB11 | HCD_DMA | HCD_MEMORY,
 88
 89	/*
 90	 * basic lifecycle operations
 91	 */
 92	.reset =		ohci_sa1111_reset,
 93	.start =		ohci_sa1111_start,
 94	.stop =			ohci_stop,
 95	.shutdown =		ohci_shutdown,
 96
 97	/*
 98	 * managing i/o requests and associated device resources
 99	 */
100	.urb_enqueue =		ohci_urb_enqueue,
101	.urb_dequeue =		ohci_urb_dequeue,
102	.endpoint_disable =	ohci_endpoint_disable,
103
104	/*
105	 * scheduling support
106	 */
107	.get_frame_number =	ohci_get_frame,
108
109	/*
110	 * root hub support
111	 */
112	.hub_status_data =	ohci_hub_status_data,
113	.hub_control =		ohci_hub_control,
114#ifdef	CONFIG_PM
115	.bus_suspend =		ohci_bus_suspend,
116	.bus_resume =		ohci_bus_resume,
117#endif
118	.start_port_reset =	ohci_start_port_reset,
119};
120
121static int sa1111_start_hc(struct sa1111_dev *dev)
122{
123	unsigned int usb_rst = 0;
124	int ret;
125
126	dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
127
128	if (machine_is_xp860() ||
129	    machine_is_assabet() ||
130	    machine_is_pfs168() ||
131	    machine_is_badge4())
132		usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
133
134	/*
135	 * Configure the power sense and control lines.  Place the USB
136	 * host controller in reset.
137	 */
138	writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
139		      dev->mapbase + USB_RESET);
140
141	/*
142	 * Now, carefully enable the USB clock, and take
143	 * the USB host controller out of reset.
144	 */
145	ret = sa1111_enable_device(dev);
146	if (ret == 0) {
147		udelay(11);
148		writel_relaxed(usb_rst, dev->mapbase + USB_RESET);
149	}
150
151	return ret;
152}
153
154static void sa1111_stop_hc(struct sa1111_dev *dev)
155{
156	unsigned int usb_rst;
157
158	dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
159
160	/*
161	 * Put the USB host controller into reset.
162	 */
163	usb_rst = readl_relaxed(dev->mapbase + USB_RESET);
164	writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
165		      dev->mapbase + USB_RESET);
166
167	/*
168	 * Stop the USB clock.
169	 */
170	sa1111_disable_device(dev);
171}
172
173/**
174 * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
175 *
176 * Allocates basic resources for this USB host controller, and
177 * then invokes the start() method for the HCD associated with it.
178 */
179static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
180{
181	struct usb_hcd *hcd;
182	int ret, irq;
183
184	if (usb_disabled())
185		return -ENODEV;
186
187	/*
188	 * We don't call dma_set_mask_and_coherent() here because the
189	 * DMA mask has already been appropraitely setup by the core
190	 * SA-1111 bus code (which includes bug workarounds.)
191	 */
192
193	hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
194	if (!hcd)
195		return -ENOMEM;
196
197	hcd->rsrc_start = dev->res.start;
198	hcd->rsrc_len = resource_size(&dev->res);
199
200	irq = sa1111_get_irq(dev, 1);
201	if (irq <= 0) {
202		ret = irq ? : -ENXIO;
203		goto err1;
204	}
205
206	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
207		dev_dbg(&dev->dev, "request_mem_region failed\n");
208		ret = -EBUSY;
209		goto err1;
210	}
211
212	hcd->regs = dev->mapbase;
213
214	ret = sa1111_start_hc(dev);
215	if (ret)
216		goto err2;
217
218	ret = usb_add_hcd(hcd, irq, 0);
219	if (ret == 0) {
220		device_wakeup_enable(hcd->self.controller);
221		return ret;
222	}
223
224	sa1111_stop_hc(dev);
225 err2:
226	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
227 err1:
228	usb_put_hcd(hcd);
229	return ret;
230}
231
232/**
233 * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
234 * @dev: USB Host Controller being removed
235 *
236 * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
237 * the HCD's stop() method.
238 */
239static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
240{
241	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
242
243	usb_remove_hcd(hcd);
244	sa1111_stop_hc(dev);
245	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
246	usb_put_hcd(hcd);
247
248	return 0;
249}
250
251static void ohci_hcd_sa1111_shutdown(struct device *_dev)
252{
253	struct sa1111_dev *dev = to_sa1111_device(_dev);
254	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
255
256	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
257		hcd->driver->shutdown(hcd);
258		sa1111_stop_hc(dev);
259	}
260}
261
262static struct sa1111_driver ohci_hcd_sa1111_driver = {
263	.drv = {
264		.name	= "sa1111-ohci",
265		.owner	= THIS_MODULE,
266		.shutdown = ohci_hcd_sa1111_shutdown,
267	},
268	.devid		= SA1111_DEVID_USB,
269	.probe		= ohci_hcd_sa1111_probe,
270	.remove		= ohci_hcd_sa1111_remove,
 
271};