Loading...
1/*
2 * au1550 psc spi controller driver
3 * may work also with au1200, au1210, au1250
4 * will not work on au1000, au1100 and au1500 (no full spi controller there)
5 *
6 * Copyright (c) 2006 ATRON electronic GmbH
7 * Author: Jan Nikitenko <jan.nikitenko@gmail.com>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20#include <linux/init.h>
21#include <linux/interrupt.h>
22#include <linux/slab.h>
23#include <linux/errno.h>
24#include <linux/module.h>
25#include <linux/device.h>
26#include <linux/platform_device.h>
27#include <linux/resource.h>
28#include <linux/spi/spi.h>
29#include <linux/spi/spi_bitbang.h>
30#include <linux/dma-mapping.h>
31#include <linux/completion.h>
32#include <asm/mach-au1x00/au1000.h>
33#include <asm/mach-au1x00/au1xxx_psc.h>
34#include <asm/mach-au1x00/au1xxx_dbdma.h>
35
36#include <asm/mach-au1x00/au1550_spi.h>
37
38static unsigned usedma = 1;
39module_param(usedma, uint, 0644);
40
41/*
42#define AU1550_SPI_DEBUG_LOOPBACK
43*/
44
45
46#define AU1550_SPI_DBDMA_DESCRIPTORS 1
47#define AU1550_SPI_DMA_RXTMP_MINSIZE 2048U
48
49struct au1550_spi {
50 struct spi_bitbang bitbang;
51
52 volatile psc_spi_t __iomem *regs;
53 int irq;
54
55 unsigned len;
56 unsigned tx_count;
57 unsigned rx_count;
58 const u8 *tx;
59 u8 *rx;
60
61 void (*rx_word)(struct au1550_spi *hw);
62 void (*tx_word)(struct au1550_spi *hw);
63 int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t);
64 irqreturn_t (*irq_callback)(struct au1550_spi *hw);
65
66 struct completion master_done;
67
68 unsigned usedma;
69 u32 dma_tx_id;
70 u32 dma_rx_id;
71 u32 dma_tx_ch;
72 u32 dma_rx_ch;
73
74 u8 *dma_rx_tmpbuf;
75 unsigned dma_rx_tmpbuf_size;
76 u32 dma_rx_tmpbuf_addr;
77
78 struct spi_master *master;
79 struct device *dev;
80 struct au1550_spi_info *pdata;
81 struct resource *ioarea;
82};
83
84
85/* we use an 8-bit memory device for dma transfers to/from spi fifo */
86static dbdev_tab_t au1550_spi_mem_dbdev =
87{
88 .dev_id = DBDMA_MEM_CHAN,
89 .dev_flags = DEV_FLAGS_ANYUSE|DEV_FLAGS_SYNC,
90 .dev_tsize = 0,
91 .dev_devwidth = 8,
92 .dev_physaddr = 0x00000000,
93 .dev_intlevel = 0,
94 .dev_intpolarity = 0
95};
96
97static int ddma_memid; /* id to above mem dma device */
98
99static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw);
100
101
102/*
103 * compute BRG and DIV bits to setup spi clock based on main input clock rate
104 * that was specified in platform data structure
105 * according to au1550 datasheet:
106 * psc_tempclk = psc_mainclk / (2 << DIV)
107 * spiclk = psc_tempclk / (2 * (BRG + 1))
108 * BRG valid range is 4..63
109 * DIV valid range is 0..3
110 */
111static u32 au1550_spi_baudcfg(struct au1550_spi *hw, unsigned speed_hz)
112{
113 u32 mainclk_hz = hw->pdata->mainclk_hz;
114 u32 div, brg;
115
116 for (div = 0; div < 4; div++) {
117 brg = mainclk_hz / speed_hz / (4 << div);
118 /* now we have BRG+1 in brg, so count with that */
119 if (brg < (4 + 1)) {
120 brg = (4 + 1); /* speed_hz too big */
121 break; /* set lowest brg (div is == 0) */
122 }
123 if (brg <= (63 + 1))
124 break; /* we have valid brg and div */
125 }
126 if (div == 4) {
127 div = 3; /* speed_hz too small */
128 brg = (63 + 1); /* set highest brg and div */
129 }
130 brg--;
131 return PSC_SPICFG_SET_BAUD(brg) | PSC_SPICFG_SET_DIV(div);
132}
133
134static inline void au1550_spi_mask_ack_all(struct au1550_spi *hw)
135{
136 hw->regs->psc_spimsk =
137 PSC_SPIMSK_MM | PSC_SPIMSK_RR | PSC_SPIMSK_RO
138 | PSC_SPIMSK_RU | PSC_SPIMSK_TR | PSC_SPIMSK_TO
139 | PSC_SPIMSK_TU | PSC_SPIMSK_SD | PSC_SPIMSK_MD;
140 wmb(); /* drain writebuffer */
141
142 hw->regs->psc_spievent =
143 PSC_SPIEVNT_MM | PSC_SPIEVNT_RR | PSC_SPIEVNT_RO
144 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TR | PSC_SPIEVNT_TO
145 | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD | PSC_SPIEVNT_MD;
146 wmb(); /* drain writebuffer */
147}
148
149static void au1550_spi_reset_fifos(struct au1550_spi *hw)
150{
151 u32 pcr;
152
153 hw->regs->psc_spipcr = PSC_SPIPCR_RC | PSC_SPIPCR_TC;
154 wmb(); /* drain writebuffer */
155 do {
156 pcr = hw->regs->psc_spipcr;
157 wmb(); /* drain writebuffer */
158 } while (pcr != 0);
159}
160
161/*
162 * dma transfers are used for the most common spi word size of 8-bits
163 * we cannot easily change already set up dma channels' width, so if we wanted
164 * dma support for more than 8-bit words (up to 24 bits), we would need to
165 * setup dma channels from scratch on each spi transfer, based on bits_per_word
166 * instead we have pre set up 8 bit dma channels supporting spi 4 to 8 bits
167 * transfers, and 9 to 24 bits spi transfers will be done in pio irq based mode
168 * callbacks to handle dma or pio are set up in au1550_spi_bits_handlers_set()
169 */
170static void au1550_spi_chipsel(struct spi_device *spi, int value)
171{
172 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
173 unsigned cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
174 u32 cfg, stat;
175
176 switch (value) {
177 case BITBANG_CS_INACTIVE:
178 if (hw->pdata->deactivate_cs)
179 hw->pdata->deactivate_cs(hw->pdata, spi->chip_select,
180 cspol);
181 break;
182
183 case BITBANG_CS_ACTIVE:
184 au1550_spi_bits_handlers_set(hw, spi->bits_per_word);
185
186 cfg = hw->regs->psc_spicfg;
187 wmb(); /* drain writebuffer */
188 hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE;
189 wmb(); /* drain writebuffer */
190
191 if (spi->mode & SPI_CPOL)
192 cfg |= PSC_SPICFG_BI;
193 else
194 cfg &= ~PSC_SPICFG_BI;
195 if (spi->mode & SPI_CPHA)
196 cfg &= ~PSC_SPICFG_CDE;
197 else
198 cfg |= PSC_SPICFG_CDE;
199
200 if (spi->mode & SPI_LSB_FIRST)
201 cfg |= PSC_SPICFG_MLF;
202 else
203 cfg &= ~PSC_SPICFG_MLF;
204
205 if (hw->usedma && spi->bits_per_word <= 8)
206 cfg &= ~PSC_SPICFG_DD_DISABLE;
207 else
208 cfg |= PSC_SPICFG_DD_DISABLE;
209 cfg = PSC_SPICFG_CLR_LEN(cfg);
210 cfg |= PSC_SPICFG_SET_LEN(spi->bits_per_word);
211
212 cfg = PSC_SPICFG_CLR_BAUD(cfg);
213 cfg &= ~PSC_SPICFG_SET_DIV(3);
214 cfg |= au1550_spi_baudcfg(hw, spi->max_speed_hz);
215
216 hw->regs->psc_spicfg = cfg | PSC_SPICFG_DE_ENABLE;
217 wmb(); /* drain writebuffer */
218 do {
219 stat = hw->regs->psc_spistat;
220 wmb(); /* drain writebuffer */
221 } while ((stat & PSC_SPISTAT_DR) == 0);
222
223 if (hw->pdata->activate_cs)
224 hw->pdata->activate_cs(hw->pdata, spi->chip_select,
225 cspol);
226 break;
227 }
228}
229
230static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
231{
232 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
233 unsigned bpw, hz;
234 u32 cfg, stat;
235
236 if (t) {
237 bpw = t->bits_per_word;
238 hz = t->speed_hz;
239 } else {
240 bpw = spi->bits_per_word;
241 hz = spi->max_speed_hz;
242 }
243
244 if (!hz)
245 return -EINVAL;
246
247 au1550_spi_bits_handlers_set(hw, spi->bits_per_word);
248
249 cfg = hw->regs->psc_spicfg;
250 wmb(); /* drain writebuffer */
251 hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE;
252 wmb(); /* drain writebuffer */
253
254 if (hw->usedma && bpw <= 8)
255 cfg &= ~PSC_SPICFG_DD_DISABLE;
256 else
257 cfg |= PSC_SPICFG_DD_DISABLE;
258 cfg = PSC_SPICFG_CLR_LEN(cfg);
259 cfg |= PSC_SPICFG_SET_LEN(bpw);
260
261 cfg = PSC_SPICFG_CLR_BAUD(cfg);
262 cfg &= ~PSC_SPICFG_SET_DIV(3);
263 cfg |= au1550_spi_baudcfg(hw, hz);
264
265 hw->regs->psc_spicfg = cfg;
266 wmb(); /* drain writebuffer */
267
268 if (cfg & PSC_SPICFG_DE_ENABLE) {
269 do {
270 stat = hw->regs->psc_spistat;
271 wmb(); /* drain writebuffer */
272 } while ((stat & PSC_SPISTAT_DR) == 0);
273 }
274
275 au1550_spi_reset_fifos(hw);
276 au1550_spi_mask_ack_all(hw);
277 return 0;
278}
279
280/*
281 * for dma spi transfers, we have to setup rx channel, otherwise there is
282 * no reliable way how to recognize that spi transfer is done
283 * dma complete callbacks are called before real spi transfer is finished
284 * and if only tx dma channel is set up (and rx fifo overflow event masked)
285 * spi master done event irq is not generated unless rx fifo is empty (emptied)
286 * so we need rx tmp buffer to use for rx dma if user does not provide one
287 */
288static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned size)
289{
290 hw->dma_rx_tmpbuf = kmalloc(size, GFP_KERNEL);
291 if (!hw->dma_rx_tmpbuf)
292 return -ENOMEM;
293 hw->dma_rx_tmpbuf_size = size;
294 hw->dma_rx_tmpbuf_addr = dma_map_single(hw->dev, hw->dma_rx_tmpbuf,
295 size, DMA_FROM_DEVICE);
296 if (dma_mapping_error(hw->dev, hw->dma_rx_tmpbuf_addr)) {
297 kfree(hw->dma_rx_tmpbuf);
298 hw->dma_rx_tmpbuf = 0;
299 hw->dma_rx_tmpbuf_size = 0;
300 return -EFAULT;
301 }
302 return 0;
303}
304
305static void au1550_spi_dma_rxtmp_free(struct au1550_spi *hw)
306{
307 dma_unmap_single(hw->dev, hw->dma_rx_tmpbuf_addr,
308 hw->dma_rx_tmpbuf_size, DMA_FROM_DEVICE);
309 kfree(hw->dma_rx_tmpbuf);
310 hw->dma_rx_tmpbuf = 0;
311 hw->dma_rx_tmpbuf_size = 0;
312}
313
314static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
315{
316 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
317 dma_addr_t dma_tx_addr;
318 dma_addr_t dma_rx_addr;
319 u32 res;
320
321 hw->len = t->len;
322 hw->tx_count = 0;
323 hw->rx_count = 0;
324
325 hw->tx = t->tx_buf;
326 hw->rx = t->rx_buf;
327 dma_tx_addr = t->tx_dma;
328 dma_rx_addr = t->rx_dma;
329
330 /*
331 * check if buffers are already dma mapped, map them otherwise:
332 * - first map the TX buffer, so cache data gets written to memory
333 * - then map the RX buffer, so that cache entries (with
334 * soon-to-be-stale data) get removed
335 * use rx buffer in place of tx if tx buffer was not provided
336 * use temp rx buffer (preallocated or realloc to fit) for rx dma
337 */
338 if (t->tx_buf) {
339 if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
340 dma_tx_addr = dma_map_single(hw->dev,
341 (void *)t->tx_buf,
342 t->len, DMA_TO_DEVICE);
343 if (dma_mapping_error(hw->dev, dma_tx_addr))
344 dev_err(hw->dev, "tx dma map error\n");
345 }
346 }
347
348 if (t->rx_buf) {
349 if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
350 dma_rx_addr = dma_map_single(hw->dev,
351 (void *)t->rx_buf,
352 t->len, DMA_FROM_DEVICE);
353 if (dma_mapping_error(hw->dev, dma_rx_addr))
354 dev_err(hw->dev, "rx dma map error\n");
355 }
356 } else {
357 if (t->len > hw->dma_rx_tmpbuf_size) {
358 int ret;
359
360 au1550_spi_dma_rxtmp_free(hw);
361 ret = au1550_spi_dma_rxtmp_alloc(hw, max(t->len,
362 AU1550_SPI_DMA_RXTMP_MINSIZE));
363 if (ret < 0)
364 return ret;
365 }
366 hw->rx = hw->dma_rx_tmpbuf;
367 dma_rx_addr = hw->dma_rx_tmpbuf_addr;
368 dma_sync_single_for_device(hw->dev, dma_rx_addr,
369 t->len, DMA_FROM_DEVICE);
370 }
371
372 if (!t->tx_buf) {
373 dma_sync_single_for_device(hw->dev, dma_rx_addr,
374 t->len, DMA_BIDIRECTIONAL);
375 hw->tx = hw->rx;
376 }
377
378 /* put buffers on the ring */
379 res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx),
380 t->len, DDMA_FLAGS_IE);
381 if (!res)
382 dev_err(hw->dev, "rx dma put dest error\n");
383
384 res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx),
385 t->len, DDMA_FLAGS_IE);
386 if (!res)
387 dev_err(hw->dev, "tx dma put source error\n");
388
389 au1xxx_dbdma_start(hw->dma_rx_ch);
390 au1xxx_dbdma_start(hw->dma_tx_ch);
391
392 /* by default enable nearly all events interrupt */
393 hw->regs->psc_spimsk = PSC_SPIMSK_SD;
394 wmb(); /* drain writebuffer */
395
396 /* start the transfer */
397 hw->regs->psc_spipcr = PSC_SPIPCR_MS;
398 wmb(); /* drain writebuffer */
399
400 wait_for_completion(&hw->master_done);
401
402 au1xxx_dbdma_stop(hw->dma_tx_ch);
403 au1xxx_dbdma_stop(hw->dma_rx_ch);
404
405 if (!t->rx_buf) {
406 /* using the temporal preallocated and premapped buffer */
407 dma_sync_single_for_cpu(hw->dev, dma_rx_addr, t->len,
408 DMA_FROM_DEVICE);
409 }
410 /* unmap buffers if mapped above */
411 if (t->rx_buf && t->rx_dma == 0 )
412 dma_unmap_single(hw->dev, dma_rx_addr, t->len,
413 DMA_FROM_DEVICE);
414 if (t->tx_buf && t->tx_dma == 0 )
415 dma_unmap_single(hw->dev, dma_tx_addr, t->len,
416 DMA_TO_DEVICE);
417
418 return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count;
419}
420
421static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
422{
423 u32 stat, evnt;
424
425 stat = hw->regs->psc_spistat;
426 evnt = hw->regs->psc_spievent;
427 wmb(); /* drain writebuffer */
428 if ((stat & PSC_SPISTAT_DI) == 0) {
429 dev_err(hw->dev, "Unexpected IRQ!\n");
430 return IRQ_NONE;
431 }
432
433 if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO
434 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO
435 | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD))
436 != 0) {
437 /*
438 * due to an spi error we consider transfer as done,
439 * so mask all events until before next transfer start
440 * and stop the possibly running dma immediately
441 */
442 au1550_spi_mask_ack_all(hw);
443 au1xxx_dbdma_stop(hw->dma_rx_ch);
444 au1xxx_dbdma_stop(hw->dma_tx_ch);
445
446 /* get number of transferred bytes */
447 hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch);
448 hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch);
449
450 au1xxx_dbdma_reset(hw->dma_rx_ch);
451 au1xxx_dbdma_reset(hw->dma_tx_ch);
452 au1550_spi_reset_fifos(hw);
453
454 if (evnt == PSC_SPIEVNT_RO)
455 dev_err(hw->dev,
456 "dma transfer: receive FIFO overflow!\n");
457 else
458 dev_err(hw->dev,
459 "dma transfer: unexpected SPI error "
460 "(event=0x%x stat=0x%x)!\n", evnt, stat);
461
462 complete(&hw->master_done);
463 return IRQ_HANDLED;
464 }
465
466 if ((evnt & PSC_SPIEVNT_MD) != 0) {
467 /* transfer completed successfully */
468 au1550_spi_mask_ack_all(hw);
469 hw->rx_count = hw->len;
470 hw->tx_count = hw->len;
471 complete(&hw->master_done);
472 }
473 return IRQ_HANDLED;
474}
475
476
477/* routines to handle different word sizes in pio mode */
478#define AU1550_SPI_RX_WORD(size, mask) \
479static void au1550_spi_rx_word_##size(struct au1550_spi *hw) \
480{ \
481 u32 fifoword = hw->regs->psc_spitxrx & (u32)(mask); \
482 wmb(); /* drain writebuffer */ \
483 if (hw->rx) { \
484 *(u##size *)hw->rx = (u##size)fifoword; \
485 hw->rx += (size) / 8; \
486 } \
487 hw->rx_count += (size) / 8; \
488}
489
490#define AU1550_SPI_TX_WORD(size, mask) \
491static void au1550_spi_tx_word_##size(struct au1550_spi *hw) \
492{ \
493 u32 fifoword = 0; \
494 if (hw->tx) { \
495 fifoword = *(u##size *)hw->tx & (u32)(mask); \
496 hw->tx += (size) / 8; \
497 } \
498 hw->tx_count += (size) / 8; \
499 if (hw->tx_count >= hw->len) \
500 fifoword |= PSC_SPITXRX_LC; \
501 hw->regs->psc_spitxrx = fifoword; \
502 wmb(); /* drain writebuffer */ \
503}
504
505AU1550_SPI_RX_WORD(8,0xff)
506AU1550_SPI_RX_WORD(16,0xffff)
507AU1550_SPI_RX_WORD(32,0xffffff)
508AU1550_SPI_TX_WORD(8,0xff)
509AU1550_SPI_TX_WORD(16,0xffff)
510AU1550_SPI_TX_WORD(32,0xffffff)
511
512static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t)
513{
514 u32 stat, mask;
515 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
516
517 hw->tx = t->tx_buf;
518 hw->rx = t->rx_buf;
519 hw->len = t->len;
520 hw->tx_count = 0;
521 hw->rx_count = 0;
522
523 /* by default enable nearly all events after filling tx fifo */
524 mask = PSC_SPIMSK_SD;
525
526 /* fill the transmit FIFO */
527 while (hw->tx_count < hw->len) {
528
529 hw->tx_word(hw);
530
531 if (hw->tx_count >= hw->len) {
532 /* mask tx fifo request interrupt as we are done */
533 mask |= PSC_SPIMSK_TR;
534 }
535
536 stat = hw->regs->psc_spistat;
537 wmb(); /* drain writebuffer */
538 if (stat & PSC_SPISTAT_TF)
539 break;
540 }
541
542 /* enable event interrupts */
543 hw->regs->psc_spimsk = mask;
544 wmb(); /* drain writebuffer */
545
546 /* start the transfer */
547 hw->regs->psc_spipcr = PSC_SPIPCR_MS;
548 wmb(); /* drain writebuffer */
549
550 wait_for_completion(&hw->master_done);
551
552 return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count;
553}
554
555static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw)
556{
557 int busy;
558 u32 stat, evnt;
559
560 stat = hw->regs->psc_spistat;
561 evnt = hw->regs->psc_spievent;
562 wmb(); /* drain writebuffer */
563 if ((stat & PSC_SPISTAT_DI) == 0) {
564 dev_err(hw->dev, "Unexpected IRQ!\n");
565 return IRQ_NONE;
566 }
567
568 if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO
569 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO
570 | PSC_SPIEVNT_SD))
571 != 0) {
572 /*
573 * due to an error we consider transfer as done,
574 * so mask all events until before next transfer start
575 */
576 au1550_spi_mask_ack_all(hw);
577 au1550_spi_reset_fifos(hw);
578 dev_err(hw->dev,
579 "pio transfer: unexpected SPI error "
580 "(event=0x%x stat=0x%x)!\n", evnt, stat);
581 complete(&hw->master_done);
582 return IRQ_HANDLED;
583 }
584
585 /*
586 * while there is something to read from rx fifo
587 * or there is a space to write to tx fifo:
588 */
589 do {
590 busy = 0;
591 stat = hw->regs->psc_spistat;
592 wmb(); /* drain writebuffer */
593
594 /*
595 * Take care to not let the Rx FIFO overflow.
596 *
597 * We only write a byte if we have read one at least. Initially,
598 * the write fifo is full, so we should read from the read fifo
599 * first.
600 * In case we miss a word from the read fifo, we should get a
601 * RO event and should back out.
602 */
603 if (!(stat & PSC_SPISTAT_RE) && hw->rx_count < hw->len) {
604 hw->rx_word(hw);
605 busy = 1;
606
607 if (!(stat & PSC_SPISTAT_TF) && hw->tx_count < hw->len)
608 hw->tx_word(hw);
609 }
610 } while (busy);
611
612 hw->regs->psc_spievent = PSC_SPIEVNT_RR | PSC_SPIEVNT_TR;
613 wmb(); /* drain writebuffer */
614
615 /*
616 * Restart the SPI transmission in case of a transmit underflow.
617 * This seems to work despite the notes in the Au1550 data book
618 * of Figure 8-4 with flowchart for SPI master operation:
619 *
620 * """Note 1: An XFR Error Interrupt occurs, unless masked,
621 * for any of the following events: Tx FIFO Underflow,
622 * Rx FIFO Overflow, or Multiple-master Error
623 * Note 2: In case of a Tx Underflow Error, all zeroes are
624 * transmitted."""
625 *
626 * By simply restarting the spi transfer on Tx Underflow Error,
627 * we assume that spi transfer was paused instead of zeroes
628 * transmittion mentioned in the Note 2 of Au1550 data book.
629 */
630 if (evnt & PSC_SPIEVNT_TU) {
631 hw->regs->psc_spievent = PSC_SPIEVNT_TU | PSC_SPIEVNT_MD;
632 wmb(); /* drain writebuffer */
633 hw->regs->psc_spipcr = PSC_SPIPCR_MS;
634 wmb(); /* drain writebuffer */
635 }
636
637 if (hw->rx_count >= hw->len) {
638 /* transfer completed successfully */
639 au1550_spi_mask_ack_all(hw);
640 complete(&hw->master_done);
641 }
642 return IRQ_HANDLED;
643}
644
645static int au1550_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
646{
647 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
648 return hw->txrx_bufs(spi, t);
649}
650
651static irqreturn_t au1550_spi_irq(int irq, void *dev)
652{
653 struct au1550_spi *hw = dev;
654 return hw->irq_callback(hw);
655}
656
657static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw)
658{
659 if (bpw <= 8) {
660 if (hw->usedma) {
661 hw->txrx_bufs = &au1550_spi_dma_txrxb;
662 hw->irq_callback = &au1550_spi_dma_irq_callback;
663 } else {
664 hw->rx_word = &au1550_spi_rx_word_8;
665 hw->tx_word = &au1550_spi_tx_word_8;
666 hw->txrx_bufs = &au1550_spi_pio_txrxb;
667 hw->irq_callback = &au1550_spi_pio_irq_callback;
668 }
669 } else if (bpw <= 16) {
670 hw->rx_word = &au1550_spi_rx_word_16;
671 hw->tx_word = &au1550_spi_tx_word_16;
672 hw->txrx_bufs = &au1550_spi_pio_txrxb;
673 hw->irq_callback = &au1550_spi_pio_irq_callback;
674 } else {
675 hw->rx_word = &au1550_spi_rx_word_32;
676 hw->tx_word = &au1550_spi_tx_word_32;
677 hw->txrx_bufs = &au1550_spi_pio_txrxb;
678 hw->irq_callback = &au1550_spi_pio_irq_callback;
679 }
680}
681
682static void au1550_spi_setup_psc_as_spi(struct au1550_spi *hw)
683{
684 u32 stat, cfg;
685
686 /* set up the PSC for SPI mode */
687 hw->regs->psc_ctrl = PSC_CTRL_DISABLE;
688 wmb(); /* drain writebuffer */
689 hw->regs->psc_sel = PSC_SEL_PS_SPIMODE;
690 wmb(); /* drain writebuffer */
691
692 hw->regs->psc_spicfg = 0;
693 wmb(); /* drain writebuffer */
694
695 hw->regs->psc_ctrl = PSC_CTRL_ENABLE;
696 wmb(); /* drain writebuffer */
697
698 do {
699 stat = hw->regs->psc_spistat;
700 wmb(); /* drain writebuffer */
701 } while ((stat & PSC_SPISTAT_SR) == 0);
702
703
704 cfg = hw->usedma ? 0 : PSC_SPICFG_DD_DISABLE;
705 cfg |= PSC_SPICFG_SET_LEN(8);
706 cfg |= PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8;
707 /* use minimal allowed brg and div values as initial setting: */
708 cfg |= PSC_SPICFG_SET_BAUD(4) | PSC_SPICFG_SET_DIV(0);
709
710#ifdef AU1550_SPI_DEBUG_LOOPBACK
711 cfg |= PSC_SPICFG_LB;
712#endif
713
714 hw->regs->psc_spicfg = cfg;
715 wmb(); /* drain writebuffer */
716
717 au1550_spi_mask_ack_all(hw);
718
719 hw->regs->psc_spicfg |= PSC_SPICFG_DE_ENABLE;
720 wmb(); /* drain writebuffer */
721
722 do {
723 stat = hw->regs->psc_spistat;
724 wmb(); /* drain writebuffer */
725 } while ((stat & PSC_SPISTAT_DR) == 0);
726
727 au1550_spi_reset_fifos(hw);
728}
729
730
731static int au1550_spi_probe(struct platform_device *pdev)
732{
733 struct au1550_spi *hw;
734 struct spi_master *master;
735 struct resource *r;
736 int err = 0;
737
738 master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi));
739 if (master == NULL) {
740 dev_err(&pdev->dev, "No memory for spi_master\n");
741 err = -ENOMEM;
742 goto err_nomem;
743 }
744
745 /* the spi->mode bits understood by this driver: */
746 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
747 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 24);
748
749 hw = spi_master_get_devdata(master);
750
751 hw->master = master;
752 hw->pdata = dev_get_platdata(&pdev->dev);
753 hw->dev = &pdev->dev;
754
755 if (hw->pdata == NULL) {
756 dev_err(&pdev->dev, "No platform data supplied\n");
757 err = -ENOENT;
758 goto err_no_pdata;
759 }
760
761 r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
762 if (!r) {
763 dev_err(&pdev->dev, "no IRQ\n");
764 err = -ENODEV;
765 goto err_no_iores;
766 }
767 hw->irq = r->start;
768
769 hw->usedma = 0;
770 r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
771 if (r) {
772 hw->dma_tx_id = r->start;
773 r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
774 if (r) {
775 hw->dma_rx_id = r->start;
776 if (usedma && ddma_memid) {
777 if (pdev->dev.dma_mask == NULL)
778 dev_warn(&pdev->dev, "no dma mask\n");
779 else
780 hw->usedma = 1;
781 }
782 }
783 }
784
785 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
786 if (!r) {
787 dev_err(&pdev->dev, "no mmio resource\n");
788 err = -ENODEV;
789 goto err_no_iores;
790 }
791
792 hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t),
793 pdev->name);
794 if (!hw->ioarea) {
795 dev_err(&pdev->dev, "Cannot reserve iomem region\n");
796 err = -ENXIO;
797 goto err_no_iores;
798 }
799
800 hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t));
801 if (!hw->regs) {
802 dev_err(&pdev->dev, "cannot ioremap\n");
803 err = -ENXIO;
804 goto err_ioremap;
805 }
806
807 platform_set_drvdata(pdev, hw);
808
809 init_completion(&hw->master_done);
810
811 hw->bitbang.master = hw->master;
812 hw->bitbang.setup_transfer = au1550_spi_setupxfer;
813 hw->bitbang.chipselect = au1550_spi_chipsel;
814 hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
815
816 if (hw->usedma) {
817 hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid,
818 hw->dma_tx_id, NULL, (void *)hw);
819 if (hw->dma_tx_ch == 0) {
820 dev_err(&pdev->dev,
821 "Cannot allocate tx dma channel\n");
822 err = -ENXIO;
823 goto err_no_txdma;
824 }
825 au1xxx_dbdma_set_devwidth(hw->dma_tx_ch, 8);
826 if (au1xxx_dbdma_ring_alloc(hw->dma_tx_ch,
827 AU1550_SPI_DBDMA_DESCRIPTORS) == 0) {
828 dev_err(&pdev->dev,
829 "Cannot allocate tx dma descriptors\n");
830 err = -ENXIO;
831 goto err_no_txdma_descr;
832 }
833
834
835 hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id,
836 ddma_memid, NULL, (void *)hw);
837 if (hw->dma_rx_ch == 0) {
838 dev_err(&pdev->dev,
839 "Cannot allocate rx dma channel\n");
840 err = -ENXIO;
841 goto err_no_rxdma;
842 }
843 au1xxx_dbdma_set_devwidth(hw->dma_rx_ch, 8);
844 if (au1xxx_dbdma_ring_alloc(hw->dma_rx_ch,
845 AU1550_SPI_DBDMA_DESCRIPTORS) == 0) {
846 dev_err(&pdev->dev,
847 "Cannot allocate rx dma descriptors\n");
848 err = -ENXIO;
849 goto err_no_rxdma_descr;
850 }
851
852 err = au1550_spi_dma_rxtmp_alloc(hw,
853 AU1550_SPI_DMA_RXTMP_MINSIZE);
854 if (err < 0) {
855 dev_err(&pdev->dev,
856 "Cannot allocate initial rx dma tmp buffer\n");
857 goto err_dma_rxtmp_alloc;
858 }
859 }
860
861 au1550_spi_bits_handlers_set(hw, 8);
862
863 err = request_irq(hw->irq, au1550_spi_irq, 0, pdev->name, hw);
864 if (err) {
865 dev_err(&pdev->dev, "Cannot claim IRQ\n");
866 goto err_no_irq;
867 }
868
869 master->bus_num = pdev->id;
870 master->num_chipselect = hw->pdata->num_chipselect;
871
872 /*
873 * precompute valid range for spi freq - from au1550 datasheet:
874 * psc_tempclk = psc_mainclk / (2 << DIV)
875 * spiclk = psc_tempclk / (2 * (BRG + 1))
876 * BRG valid range is 4..63
877 * DIV valid range is 0..3
878 * round the min and max frequencies to values that would still
879 * produce valid brg and div
880 */
881 {
882 int min_div = (2 << 0) * (2 * (4 + 1));
883 int max_div = (2 << 3) * (2 * (63 + 1));
884 master->max_speed_hz = hw->pdata->mainclk_hz / min_div;
885 master->min_speed_hz =
886 hw->pdata->mainclk_hz / (max_div + 1) + 1;
887 }
888
889 au1550_spi_setup_psc_as_spi(hw);
890
891 err = spi_bitbang_start(&hw->bitbang);
892 if (err) {
893 dev_err(&pdev->dev, "Failed to register SPI master\n");
894 goto err_register;
895 }
896
897 dev_info(&pdev->dev,
898 "spi master registered: bus_num=%d num_chipselect=%d\n",
899 master->bus_num, master->num_chipselect);
900
901 return 0;
902
903err_register:
904 free_irq(hw->irq, hw);
905
906err_no_irq:
907 au1550_spi_dma_rxtmp_free(hw);
908
909err_dma_rxtmp_alloc:
910err_no_rxdma_descr:
911 if (hw->usedma)
912 au1xxx_dbdma_chan_free(hw->dma_rx_ch);
913
914err_no_rxdma:
915err_no_txdma_descr:
916 if (hw->usedma)
917 au1xxx_dbdma_chan_free(hw->dma_tx_ch);
918
919err_no_txdma:
920 iounmap((void __iomem *)hw->regs);
921
922err_ioremap:
923 release_mem_region(r->start, sizeof(psc_spi_t));
924
925err_no_iores:
926err_no_pdata:
927 spi_master_put(hw->master);
928
929err_nomem:
930 return err;
931}
932
933static int au1550_spi_remove(struct platform_device *pdev)
934{
935 struct au1550_spi *hw = platform_get_drvdata(pdev);
936
937 dev_info(&pdev->dev, "spi master remove: bus_num=%d\n",
938 hw->master->bus_num);
939
940 spi_bitbang_stop(&hw->bitbang);
941 free_irq(hw->irq, hw);
942 iounmap((void __iomem *)hw->regs);
943 release_mem_region(hw->ioarea->start, sizeof(psc_spi_t));
944
945 if (hw->usedma) {
946 au1550_spi_dma_rxtmp_free(hw);
947 au1xxx_dbdma_chan_free(hw->dma_rx_ch);
948 au1xxx_dbdma_chan_free(hw->dma_tx_ch);
949 }
950
951 spi_master_put(hw->master);
952 return 0;
953}
954
955/* work with hotplug and coldplug */
956MODULE_ALIAS("platform:au1550-spi");
957
958static struct platform_driver au1550_spi_drv = {
959 .probe = au1550_spi_probe,
960 .remove = au1550_spi_remove,
961 .driver = {
962 .name = "au1550-spi",
963 },
964};
965
966static int __init au1550_spi_init(void)
967{
968 /*
969 * create memory device with 8 bits dev_devwidth
970 * needed for proper byte ordering to spi fifo
971 */
972 switch (alchemy_get_cputype()) {
973 case ALCHEMY_CPU_AU1550:
974 case ALCHEMY_CPU_AU1200:
975 case ALCHEMY_CPU_AU1300:
976 break;
977 default:
978 return -ENODEV;
979 }
980
981 if (usedma) {
982 ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
983 if (!ddma_memid)
984 printk(KERN_ERR "au1550-spi: cannot add memory"
985 "dbdma device\n");
986 }
987 return platform_driver_register(&au1550_spi_drv);
988}
989module_init(au1550_spi_init);
990
991static void __exit au1550_spi_exit(void)
992{
993 if (usedma && ddma_memid)
994 au1xxx_ddma_del_device(ddma_memid);
995 platform_driver_unregister(&au1550_spi_drv);
996}
997module_exit(au1550_spi_exit);
998
999MODULE_DESCRIPTION("Au1550 PSC SPI Driver");
1000MODULE_AUTHOR("Jan Nikitenko <jan.nikitenko@gmail.com>");
1001MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * au1550 psc spi controller driver
4 * may work also with au1200, au1210, au1250
5 * will not work on au1000, au1100 and au1500 (no full spi controller there)
6 *
7 * Copyright (c) 2006 ATRON electronic GmbH
8 * Author: Jan Nikitenko <jan.nikitenko@gmail.com>
9 */
10
11#include <linux/init.h>
12#include <linux/interrupt.h>
13#include <linux/slab.h>
14#include <linux/errno.h>
15#include <linux/module.h>
16#include <linux/device.h>
17#include <linux/platform_device.h>
18#include <linux/resource.h>
19#include <linux/spi/spi.h>
20#include <linux/spi/spi_bitbang.h>
21#include <linux/dma-mapping.h>
22#include <linux/completion.h>
23#include <asm/mach-au1x00/au1000.h>
24#include <asm/mach-au1x00/au1xxx_psc.h>
25#include <asm/mach-au1x00/au1xxx_dbdma.h>
26
27#include <asm/mach-au1x00/au1550_spi.h>
28
29static unsigned usedma = 1;
30module_param(usedma, uint, 0644);
31
32/*
33#define AU1550_SPI_DEBUG_LOOPBACK
34*/
35
36
37#define AU1550_SPI_DBDMA_DESCRIPTORS 1
38#define AU1550_SPI_DMA_RXTMP_MINSIZE 2048U
39
40struct au1550_spi {
41 struct spi_bitbang bitbang;
42
43 volatile psc_spi_t __iomem *regs;
44 int irq;
45
46 unsigned len;
47 unsigned tx_count;
48 unsigned rx_count;
49 const u8 *tx;
50 u8 *rx;
51
52 void (*rx_word)(struct au1550_spi *hw);
53 void (*tx_word)(struct au1550_spi *hw);
54 int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t);
55 irqreturn_t (*irq_callback)(struct au1550_spi *hw);
56
57 struct completion master_done;
58
59 unsigned usedma;
60 u32 dma_tx_id;
61 u32 dma_rx_id;
62 u32 dma_tx_ch;
63 u32 dma_rx_ch;
64
65 u8 *dma_rx_tmpbuf;
66 unsigned dma_rx_tmpbuf_size;
67 u32 dma_rx_tmpbuf_addr;
68
69 struct spi_master *master;
70 struct device *dev;
71 struct au1550_spi_info *pdata;
72 struct resource *ioarea;
73};
74
75
76/* we use an 8-bit memory device for dma transfers to/from spi fifo */
77static dbdev_tab_t au1550_spi_mem_dbdev =
78{
79 .dev_id = DBDMA_MEM_CHAN,
80 .dev_flags = DEV_FLAGS_ANYUSE|DEV_FLAGS_SYNC,
81 .dev_tsize = 0,
82 .dev_devwidth = 8,
83 .dev_physaddr = 0x00000000,
84 .dev_intlevel = 0,
85 .dev_intpolarity = 0
86};
87
88static int ddma_memid; /* id to above mem dma device */
89
90static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw);
91
92
93/*
94 * compute BRG and DIV bits to setup spi clock based on main input clock rate
95 * that was specified in platform data structure
96 * according to au1550 datasheet:
97 * psc_tempclk = psc_mainclk / (2 << DIV)
98 * spiclk = psc_tempclk / (2 * (BRG + 1))
99 * BRG valid range is 4..63
100 * DIV valid range is 0..3
101 */
102static u32 au1550_spi_baudcfg(struct au1550_spi *hw, unsigned speed_hz)
103{
104 u32 mainclk_hz = hw->pdata->mainclk_hz;
105 u32 div, brg;
106
107 for (div = 0; div < 4; div++) {
108 brg = mainclk_hz / speed_hz / (4 << div);
109 /* now we have BRG+1 in brg, so count with that */
110 if (brg < (4 + 1)) {
111 brg = (4 + 1); /* speed_hz too big */
112 break; /* set lowest brg (div is == 0) */
113 }
114 if (brg <= (63 + 1))
115 break; /* we have valid brg and div */
116 }
117 if (div == 4) {
118 div = 3; /* speed_hz too small */
119 brg = (63 + 1); /* set highest brg and div */
120 }
121 brg--;
122 return PSC_SPICFG_SET_BAUD(brg) | PSC_SPICFG_SET_DIV(div);
123}
124
125static inline void au1550_spi_mask_ack_all(struct au1550_spi *hw)
126{
127 hw->regs->psc_spimsk =
128 PSC_SPIMSK_MM | PSC_SPIMSK_RR | PSC_SPIMSK_RO
129 | PSC_SPIMSK_RU | PSC_SPIMSK_TR | PSC_SPIMSK_TO
130 | PSC_SPIMSK_TU | PSC_SPIMSK_SD | PSC_SPIMSK_MD;
131 wmb(); /* drain writebuffer */
132
133 hw->regs->psc_spievent =
134 PSC_SPIEVNT_MM | PSC_SPIEVNT_RR | PSC_SPIEVNT_RO
135 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TR | PSC_SPIEVNT_TO
136 | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD | PSC_SPIEVNT_MD;
137 wmb(); /* drain writebuffer */
138}
139
140static void au1550_spi_reset_fifos(struct au1550_spi *hw)
141{
142 u32 pcr;
143
144 hw->regs->psc_spipcr = PSC_SPIPCR_RC | PSC_SPIPCR_TC;
145 wmb(); /* drain writebuffer */
146 do {
147 pcr = hw->regs->psc_spipcr;
148 wmb(); /* drain writebuffer */
149 } while (pcr != 0);
150}
151
152/*
153 * dma transfers are used for the most common spi word size of 8-bits
154 * we cannot easily change already set up dma channels' width, so if we wanted
155 * dma support for more than 8-bit words (up to 24 bits), we would need to
156 * setup dma channels from scratch on each spi transfer, based on bits_per_word
157 * instead we have pre set up 8 bit dma channels supporting spi 4 to 8 bits
158 * transfers, and 9 to 24 bits spi transfers will be done in pio irq based mode
159 * callbacks to handle dma or pio are set up in au1550_spi_bits_handlers_set()
160 */
161static void au1550_spi_chipsel(struct spi_device *spi, int value)
162{
163 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
164 unsigned cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
165 u32 cfg, stat;
166
167 switch (value) {
168 case BITBANG_CS_INACTIVE:
169 if (hw->pdata->deactivate_cs)
170 hw->pdata->deactivate_cs(hw->pdata, spi->chip_select,
171 cspol);
172 break;
173
174 case BITBANG_CS_ACTIVE:
175 au1550_spi_bits_handlers_set(hw, spi->bits_per_word);
176
177 cfg = hw->regs->psc_spicfg;
178 wmb(); /* drain writebuffer */
179 hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE;
180 wmb(); /* drain writebuffer */
181
182 if (spi->mode & SPI_CPOL)
183 cfg |= PSC_SPICFG_BI;
184 else
185 cfg &= ~PSC_SPICFG_BI;
186 if (spi->mode & SPI_CPHA)
187 cfg &= ~PSC_SPICFG_CDE;
188 else
189 cfg |= PSC_SPICFG_CDE;
190
191 if (spi->mode & SPI_LSB_FIRST)
192 cfg |= PSC_SPICFG_MLF;
193 else
194 cfg &= ~PSC_SPICFG_MLF;
195
196 if (hw->usedma && spi->bits_per_word <= 8)
197 cfg &= ~PSC_SPICFG_DD_DISABLE;
198 else
199 cfg |= PSC_SPICFG_DD_DISABLE;
200 cfg = PSC_SPICFG_CLR_LEN(cfg);
201 cfg |= PSC_SPICFG_SET_LEN(spi->bits_per_word);
202
203 cfg = PSC_SPICFG_CLR_BAUD(cfg);
204 cfg &= ~PSC_SPICFG_SET_DIV(3);
205 cfg |= au1550_spi_baudcfg(hw, spi->max_speed_hz);
206
207 hw->regs->psc_spicfg = cfg | PSC_SPICFG_DE_ENABLE;
208 wmb(); /* drain writebuffer */
209 do {
210 stat = hw->regs->psc_spistat;
211 wmb(); /* drain writebuffer */
212 } while ((stat & PSC_SPISTAT_DR) == 0);
213
214 if (hw->pdata->activate_cs)
215 hw->pdata->activate_cs(hw->pdata, spi->chip_select,
216 cspol);
217 break;
218 }
219}
220
221static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
222{
223 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
224 unsigned bpw, hz;
225 u32 cfg, stat;
226
227 if (t) {
228 bpw = t->bits_per_word;
229 hz = t->speed_hz;
230 } else {
231 bpw = spi->bits_per_word;
232 hz = spi->max_speed_hz;
233 }
234
235 if (!hz)
236 return -EINVAL;
237
238 au1550_spi_bits_handlers_set(hw, spi->bits_per_word);
239
240 cfg = hw->regs->psc_spicfg;
241 wmb(); /* drain writebuffer */
242 hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE;
243 wmb(); /* drain writebuffer */
244
245 if (hw->usedma && bpw <= 8)
246 cfg &= ~PSC_SPICFG_DD_DISABLE;
247 else
248 cfg |= PSC_SPICFG_DD_DISABLE;
249 cfg = PSC_SPICFG_CLR_LEN(cfg);
250 cfg |= PSC_SPICFG_SET_LEN(bpw);
251
252 cfg = PSC_SPICFG_CLR_BAUD(cfg);
253 cfg &= ~PSC_SPICFG_SET_DIV(3);
254 cfg |= au1550_spi_baudcfg(hw, hz);
255
256 hw->regs->psc_spicfg = cfg;
257 wmb(); /* drain writebuffer */
258
259 if (cfg & PSC_SPICFG_DE_ENABLE) {
260 do {
261 stat = hw->regs->psc_spistat;
262 wmb(); /* drain writebuffer */
263 } while ((stat & PSC_SPISTAT_DR) == 0);
264 }
265
266 au1550_spi_reset_fifos(hw);
267 au1550_spi_mask_ack_all(hw);
268 return 0;
269}
270
271/*
272 * for dma spi transfers, we have to setup rx channel, otherwise there is
273 * no reliable way how to recognize that spi transfer is done
274 * dma complete callbacks are called before real spi transfer is finished
275 * and if only tx dma channel is set up (and rx fifo overflow event masked)
276 * spi master done event irq is not generated unless rx fifo is empty (emptied)
277 * so we need rx tmp buffer to use for rx dma if user does not provide one
278 */
279static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned size)
280{
281 hw->dma_rx_tmpbuf = kmalloc(size, GFP_KERNEL);
282 if (!hw->dma_rx_tmpbuf)
283 return -ENOMEM;
284 hw->dma_rx_tmpbuf_size = size;
285 hw->dma_rx_tmpbuf_addr = dma_map_single(hw->dev, hw->dma_rx_tmpbuf,
286 size, DMA_FROM_DEVICE);
287 if (dma_mapping_error(hw->dev, hw->dma_rx_tmpbuf_addr)) {
288 kfree(hw->dma_rx_tmpbuf);
289 hw->dma_rx_tmpbuf = 0;
290 hw->dma_rx_tmpbuf_size = 0;
291 return -EFAULT;
292 }
293 return 0;
294}
295
296static void au1550_spi_dma_rxtmp_free(struct au1550_spi *hw)
297{
298 dma_unmap_single(hw->dev, hw->dma_rx_tmpbuf_addr,
299 hw->dma_rx_tmpbuf_size, DMA_FROM_DEVICE);
300 kfree(hw->dma_rx_tmpbuf);
301 hw->dma_rx_tmpbuf = 0;
302 hw->dma_rx_tmpbuf_size = 0;
303}
304
305static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
306{
307 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
308 dma_addr_t dma_tx_addr;
309 dma_addr_t dma_rx_addr;
310 u32 res;
311
312 hw->len = t->len;
313 hw->tx_count = 0;
314 hw->rx_count = 0;
315
316 hw->tx = t->tx_buf;
317 hw->rx = t->rx_buf;
318 dma_tx_addr = t->tx_dma;
319 dma_rx_addr = t->rx_dma;
320
321 /*
322 * check if buffers are already dma mapped, map them otherwise:
323 * - first map the TX buffer, so cache data gets written to memory
324 * - then map the RX buffer, so that cache entries (with
325 * soon-to-be-stale data) get removed
326 * use rx buffer in place of tx if tx buffer was not provided
327 * use temp rx buffer (preallocated or realloc to fit) for rx dma
328 */
329 if (t->tx_buf) {
330 if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
331 dma_tx_addr = dma_map_single(hw->dev,
332 (void *)t->tx_buf,
333 t->len, DMA_TO_DEVICE);
334 if (dma_mapping_error(hw->dev, dma_tx_addr))
335 dev_err(hw->dev, "tx dma map error\n");
336 }
337 }
338
339 if (t->rx_buf) {
340 if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
341 dma_rx_addr = dma_map_single(hw->dev,
342 (void *)t->rx_buf,
343 t->len, DMA_FROM_DEVICE);
344 if (dma_mapping_error(hw->dev, dma_rx_addr))
345 dev_err(hw->dev, "rx dma map error\n");
346 }
347 } else {
348 if (t->len > hw->dma_rx_tmpbuf_size) {
349 int ret;
350
351 au1550_spi_dma_rxtmp_free(hw);
352 ret = au1550_spi_dma_rxtmp_alloc(hw, max(t->len,
353 AU1550_SPI_DMA_RXTMP_MINSIZE));
354 if (ret < 0)
355 return ret;
356 }
357 hw->rx = hw->dma_rx_tmpbuf;
358 dma_rx_addr = hw->dma_rx_tmpbuf_addr;
359 dma_sync_single_for_device(hw->dev, dma_rx_addr,
360 t->len, DMA_FROM_DEVICE);
361 }
362
363 if (!t->tx_buf) {
364 dma_sync_single_for_device(hw->dev, dma_rx_addr,
365 t->len, DMA_BIDIRECTIONAL);
366 hw->tx = hw->rx;
367 }
368
369 /* put buffers on the ring */
370 res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx),
371 t->len, DDMA_FLAGS_IE);
372 if (!res)
373 dev_err(hw->dev, "rx dma put dest error\n");
374
375 res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx),
376 t->len, DDMA_FLAGS_IE);
377 if (!res)
378 dev_err(hw->dev, "tx dma put source error\n");
379
380 au1xxx_dbdma_start(hw->dma_rx_ch);
381 au1xxx_dbdma_start(hw->dma_tx_ch);
382
383 /* by default enable nearly all events interrupt */
384 hw->regs->psc_spimsk = PSC_SPIMSK_SD;
385 wmb(); /* drain writebuffer */
386
387 /* start the transfer */
388 hw->regs->psc_spipcr = PSC_SPIPCR_MS;
389 wmb(); /* drain writebuffer */
390
391 wait_for_completion(&hw->master_done);
392
393 au1xxx_dbdma_stop(hw->dma_tx_ch);
394 au1xxx_dbdma_stop(hw->dma_rx_ch);
395
396 if (!t->rx_buf) {
397 /* using the temporal preallocated and premapped buffer */
398 dma_sync_single_for_cpu(hw->dev, dma_rx_addr, t->len,
399 DMA_FROM_DEVICE);
400 }
401 /* unmap buffers if mapped above */
402 if (t->rx_buf && t->rx_dma == 0 )
403 dma_unmap_single(hw->dev, dma_rx_addr, t->len,
404 DMA_FROM_DEVICE);
405 if (t->tx_buf && t->tx_dma == 0 )
406 dma_unmap_single(hw->dev, dma_tx_addr, t->len,
407 DMA_TO_DEVICE);
408
409 return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count;
410}
411
412static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
413{
414 u32 stat, evnt;
415
416 stat = hw->regs->psc_spistat;
417 evnt = hw->regs->psc_spievent;
418 wmb(); /* drain writebuffer */
419 if ((stat & PSC_SPISTAT_DI) == 0) {
420 dev_err(hw->dev, "Unexpected IRQ!\n");
421 return IRQ_NONE;
422 }
423
424 if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO
425 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO
426 | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD))
427 != 0) {
428 /*
429 * due to an spi error we consider transfer as done,
430 * so mask all events until before next transfer start
431 * and stop the possibly running dma immediately
432 */
433 au1550_spi_mask_ack_all(hw);
434 au1xxx_dbdma_stop(hw->dma_rx_ch);
435 au1xxx_dbdma_stop(hw->dma_tx_ch);
436
437 /* get number of transferred bytes */
438 hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch);
439 hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch);
440
441 au1xxx_dbdma_reset(hw->dma_rx_ch);
442 au1xxx_dbdma_reset(hw->dma_tx_ch);
443 au1550_spi_reset_fifos(hw);
444
445 if (evnt == PSC_SPIEVNT_RO)
446 dev_err(hw->dev,
447 "dma transfer: receive FIFO overflow!\n");
448 else
449 dev_err(hw->dev,
450 "dma transfer: unexpected SPI error "
451 "(event=0x%x stat=0x%x)!\n", evnt, stat);
452
453 complete(&hw->master_done);
454 return IRQ_HANDLED;
455 }
456
457 if ((evnt & PSC_SPIEVNT_MD) != 0) {
458 /* transfer completed successfully */
459 au1550_spi_mask_ack_all(hw);
460 hw->rx_count = hw->len;
461 hw->tx_count = hw->len;
462 complete(&hw->master_done);
463 }
464 return IRQ_HANDLED;
465}
466
467
468/* routines to handle different word sizes in pio mode */
469#define AU1550_SPI_RX_WORD(size, mask) \
470static void au1550_spi_rx_word_##size(struct au1550_spi *hw) \
471{ \
472 u32 fifoword = hw->regs->psc_spitxrx & (u32)(mask); \
473 wmb(); /* drain writebuffer */ \
474 if (hw->rx) { \
475 *(u##size *)hw->rx = (u##size)fifoword; \
476 hw->rx += (size) / 8; \
477 } \
478 hw->rx_count += (size) / 8; \
479}
480
481#define AU1550_SPI_TX_WORD(size, mask) \
482static void au1550_spi_tx_word_##size(struct au1550_spi *hw) \
483{ \
484 u32 fifoword = 0; \
485 if (hw->tx) { \
486 fifoword = *(u##size *)hw->tx & (u32)(mask); \
487 hw->tx += (size) / 8; \
488 } \
489 hw->tx_count += (size) / 8; \
490 if (hw->tx_count >= hw->len) \
491 fifoword |= PSC_SPITXRX_LC; \
492 hw->regs->psc_spitxrx = fifoword; \
493 wmb(); /* drain writebuffer */ \
494}
495
496AU1550_SPI_RX_WORD(8,0xff)
497AU1550_SPI_RX_WORD(16,0xffff)
498AU1550_SPI_RX_WORD(32,0xffffff)
499AU1550_SPI_TX_WORD(8,0xff)
500AU1550_SPI_TX_WORD(16,0xffff)
501AU1550_SPI_TX_WORD(32,0xffffff)
502
503static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t)
504{
505 u32 stat, mask;
506 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
507
508 hw->tx = t->tx_buf;
509 hw->rx = t->rx_buf;
510 hw->len = t->len;
511 hw->tx_count = 0;
512 hw->rx_count = 0;
513
514 /* by default enable nearly all events after filling tx fifo */
515 mask = PSC_SPIMSK_SD;
516
517 /* fill the transmit FIFO */
518 while (hw->tx_count < hw->len) {
519
520 hw->tx_word(hw);
521
522 if (hw->tx_count >= hw->len) {
523 /* mask tx fifo request interrupt as we are done */
524 mask |= PSC_SPIMSK_TR;
525 }
526
527 stat = hw->regs->psc_spistat;
528 wmb(); /* drain writebuffer */
529 if (stat & PSC_SPISTAT_TF)
530 break;
531 }
532
533 /* enable event interrupts */
534 hw->regs->psc_spimsk = mask;
535 wmb(); /* drain writebuffer */
536
537 /* start the transfer */
538 hw->regs->psc_spipcr = PSC_SPIPCR_MS;
539 wmb(); /* drain writebuffer */
540
541 wait_for_completion(&hw->master_done);
542
543 return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count;
544}
545
546static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw)
547{
548 int busy;
549 u32 stat, evnt;
550
551 stat = hw->regs->psc_spistat;
552 evnt = hw->regs->psc_spievent;
553 wmb(); /* drain writebuffer */
554 if ((stat & PSC_SPISTAT_DI) == 0) {
555 dev_err(hw->dev, "Unexpected IRQ!\n");
556 return IRQ_NONE;
557 }
558
559 if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO
560 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO
561 | PSC_SPIEVNT_SD))
562 != 0) {
563 /*
564 * due to an error we consider transfer as done,
565 * so mask all events until before next transfer start
566 */
567 au1550_spi_mask_ack_all(hw);
568 au1550_spi_reset_fifos(hw);
569 dev_err(hw->dev,
570 "pio transfer: unexpected SPI error "
571 "(event=0x%x stat=0x%x)!\n", evnt, stat);
572 complete(&hw->master_done);
573 return IRQ_HANDLED;
574 }
575
576 /*
577 * while there is something to read from rx fifo
578 * or there is a space to write to tx fifo:
579 */
580 do {
581 busy = 0;
582 stat = hw->regs->psc_spistat;
583 wmb(); /* drain writebuffer */
584
585 /*
586 * Take care to not let the Rx FIFO overflow.
587 *
588 * We only write a byte if we have read one at least. Initially,
589 * the write fifo is full, so we should read from the read fifo
590 * first.
591 * In case we miss a word from the read fifo, we should get a
592 * RO event and should back out.
593 */
594 if (!(stat & PSC_SPISTAT_RE) && hw->rx_count < hw->len) {
595 hw->rx_word(hw);
596 busy = 1;
597
598 if (!(stat & PSC_SPISTAT_TF) && hw->tx_count < hw->len)
599 hw->tx_word(hw);
600 }
601 } while (busy);
602
603 hw->regs->psc_spievent = PSC_SPIEVNT_RR | PSC_SPIEVNT_TR;
604 wmb(); /* drain writebuffer */
605
606 /*
607 * Restart the SPI transmission in case of a transmit underflow.
608 * This seems to work despite the notes in the Au1550 data book
609 * of Figure 8-4 with flowchart for SPI master operation:
610 *
611 * """Note 1: An XFR Error Interrupt occurs, unless masked,
612 * for any of the following events: Tx FIFO Underflow,
613 * Rx FIFO Overflow, or Multiple-master Error
614 * Note 2: In case of a Tx Underflow Error, all zeroes are
615 * transmitted."""
616 *
617 * By simply restarting the spi transfer on Tx Underflow Error,
618 * we assume that spi transfer was paused instead of zeroes
619 * transmittion mentioned in the Note 2 of Au1550 data book.
620 */
621 if (evnt & PSC_SPIEVNT_TU) {
622 hw->regs->psc_spievent = PSC_SPIEVNT_TU | PSC_SPIEVNT_MD;
623 wmb(); /* drain writebuffer */
624 hw->regs->psc_spipcr = PSC_SPIPCR_MS;
625 wmb(); /* drain writebuffer */
626 }
627
628 if (hw->rx_count >= hw->len) {
629 /* transfer completed successfully */
630 au1550_spi_mask_ack_all(hw);
631 complete(&hw->master_done);
632 }
633 return IRQ_HANDLED;
634}
635
636static int au1550_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
637{
638 struct au1550_spi *hw = spi_master_get_devdata(spi->master);
639 return hw->txrx_bufs(spi, t);
640}
641
642static irqreturn_t au1550_spi_irq(int irq, void *dev)
643{
644 struct au1550_spi *hw = dev;
645 return hw->irq_callback(hw);
646}
647
648static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw)
649{
650 if (bpw <= 8) {
651 if (hw->usedma) {
652 hw->txrx_bufs = &au1550_spi_dma_txrxb;
653 hw->irq_callback = &au1550_spi_dma_irq_callback;
654 } else {
655 hw->rx_word = &au1550_spi_rx_word_8;
656 hw->tx_word = &au1550_spi_tx_word_8;
657 hw->txrx_bufs = &au1550_spi_pio_txrxb;
658 hw->irq_callback = &au1550_spi_pio_irq_callback;
659 }
660 } else if (bpw <= 16) {
661 hw->rx_word = &au1550_spi_rx_word_16;
662 hw->tx_word = &au1550_spi_tx_word_16;
663 hw->txrx_bufs = &au1550_spi_pio_txrxb;
664 hw->irq_callback = &au1550_spi_pio_irq_callback;
665 } else {
666 hw->rx_word = &au1550_spi_rx_word_32;
667 hw->tx_word = &au1550_spi_tx_word_32;
668 hw->txrx_bufs = &au1550_spi_pio_txrxb;
669 hw->irq_callback = &au1550_spi_pio_irq_callback;
670 }
671}
672
673static void au1550_spi_setup_psc_as_spi(struct au1550_spi *hw)
674{
675 u32 stat, cfg;
676
677 /* set up the PSC for SPI mode */
678 hw->regs->psc_ctrl = PSC_CTRL_DISABLE;
679 wmb(); /* drain writebuffer */
680 hw->regs->psc_sel = PSC_SEL_PS_SPIMODE;
681 wmb(); /* drain writebuffer */
682
683 hw->regs->psc_spicfg = 0;
684 wmb(); /* drain writebuffer */
685
686 hw->regs->psc_ctrl = PSC_CTRL_ENABLE;
687 wmb(); /* drain writebuffer */
688
689 do {
690 stat = hw->regs->psc_spistat;
691 wmb(); /* drain writebuffer */
692 } while ((stat & PSC_SPISTAT_SR) == 0);
693
694
695 cfg = hw->usedma ? 0 : PSC_SPICFG_DD_DISABLE;
696 cfg |= PSC_SPICFG_SET_LEN(8);
697 cfg |= PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8;
698 /* use minimal allowed brg and div values as initial setting: */
699 cfg |= PSC_SPICFG_SET_BAUD(4) | PSC_SPICFG_SET_DIV(0);
700
701#ifdef AU1550_SPI_DEBUG_LOOPBACK
702 cfg |= PSC_SPICFG_LB;
703#endif
704
705 hw->regs->psc_spicfg = cfg;
706 wmb(); /* drain writebuffer */
707
708 au1550_spi_mask_ack_all(hw);
709
710 hw->regs->psc_spicfg |= PSC_SPICFG_DE_ENABLE;
711 wmb(); /* drain writebuffer */
712
713 do {
714 stat = hw->regs->psc_spistat;
715 wmb(); /* drain writebuffer */
716 } while ((stat & PSC_SPISTAT_DR) == 0);
717
718 au1550_spi_reset_fifos(hw);
719}
720
721
722static int au1550_spi_probe(struct platform_device *pdev)
723{
724 struct au1550_spi *hw;
725 struct spi_master *master;
726 struct resource *r;
727 int err = 0;
728
729 master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi));
730 if (master == NULL) {
731 dev_err(&pdev->dev, "No memory for spi_master\n");
732 err = -ENOMEM;
733 goto err_nomem;
734 }
735
736 /* the spi->mode bits understood by this driver: */
737 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
738 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 24);
739
740 hw = spi_master_get_devdata(master);
741
742 hw->master = master;
743 hw->pdata = dev_get_platdata(&pdev->dev);
744 hw->dev = &pdev->dev;
745
746 if (hw->pdata == NULL) {
747 dev_err(&pdev->dev, "No platform data supplied\n");
748 err = -ENOENT;
749 goto err_no_pdata;
750 }
751
752 r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
753 if (!r) {
754 dev_err(&pdev->dev, "no IRQ\n");
755 err = -ENODEV;
756 goto err_no_iores;
757 }
758 hw->irq = r->start;
759
760 hw->usedma = 0;
761 r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
762 if (r) {
763 hw->dma_tx_id = r->start;
764 r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
765 if (r) {
766 hw->dma_rx_id = r->start;
767 if (usedma && ddma_memid) {
768 if (pdev->dev.dma_mask == NULL)
769 dev_warn(&pdev->dev, "no dma mask\n");
770 else
771 hw->usedma = 1;
772 }
773 }
774 }
775
776 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
777 if (!r) {
778 dev_err(&pdev->dev, "no mmio resource\n");
779 err = -ENODEV;
780 goto err_no_iores;
781 }
782
783 hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t),
784 pdev->name);
785 if (!hw->ioarea) {
786 dev_err(&pdev->dev, "Cannot reserve iomem region\n");
787 err = -ENXIO;
788 goto err_no_iores;
789 }
790
791 hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t));
792 if (!hw->regs) {
793 dev_err(&pdev->dev, "cannot ioremap\n");
794 err = -ENXIO;
795 goto err_ioremap;
796 }
797
798 platform_set_drvdata(pdev, hw);
799
800 init_completion(&hw->master_done);
801
802 hw->bitbang.master = hw->master;
803 hw->bitbang.setup_transfer = au1550_spi_setupxfer;
804 hw->bitbang.chipselect = au1550_spi_chipsel;
805 hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs;
806
807 if (hw->usedma) {
808 hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid,
809 hw->dma_tx_id, NULL, (void *)hw);
810 if (hw->dma_tx_ch == 0) {
811 dev_err(&pdev->dev,
812 "Cannot allocate tx dma channel\n");
813 err = -ENXIO;
814 goto err_no_txdma;
815 }
816 au1xxx_dbdma_set_devwidth(hw->dma_tx_ch, 8);
817 if (au1xxx_dbdma_ring_alloc(hw->dma_tx_ch,
818 AU1550_SPI_DBDMA_DESCRIPTORS) == 0) {
819 dev_err(&pdev->dev,
820 "Cannot allocate tx dma descriptors\n");
821 err = -ENXIO;
822 goto err_no_txdma_descr;
823 }
824
825
826 hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id,
827 ddma_memid, NULL, (void *)hw);
828 if (hw->dma_rx_ch == 0) {
829 dev_err(&pdev->dev,
830 "Cannot allocate rx dma channel\n");
831 err = -ENXIO;
832 goto err_no_rxdma;
833 }
834 au1xxx_dbdma_set_devwidth(hw->dma_rx_ch, 8);
835 if (au1xxx_dbdma_ring_alloc(hw->dma_rx_ch,
836 AU1550_SPI_DBDMA_DESCRIPTORS) == 0) {
837 dev_err(&pdev->dev,
838 "Cannot allocate rx dma descriptors\n");
839 err = -ENXIO;
840 goto err_no_rxdma_descr;
841 }
842
843 err = au1550_spi_dma_rxtmp_alloc(hw,
844 AU1550_SPI_DMA_RXTMP_MINSIZE);
845 if (err < 0) {
846 dev_err(&pdev->dev,
847 "Cannot allocate initial rx dma tmp buffer\n");
848 goto err_dma_rxtmp_alloc;
849 }
850 }
851
852 au1550_spi_bits_handlers_set(hw, 8);
853
854 err = request_irq(hw->irq, au1550_spi_irq, 0, pdev->name, hw);
855 if (err) {
856 dev_err(&pdev->dev, "Cannot claim IRQ\n");
857 goto err_no_irq;
858 }
859
860 master->bus_num = pdev->id;
861 master->num_chipselect = hw->pdata->num_chipselect;
862
863 /*
864 * precompute valid range for spi freq - from au1550 datasheet:
865 * psc_tempclk = psc_mainclk / (2 << DIV)
866 * spiclk = psc_tempclk / (2 * (BRG + 1))
867 * BRG valid range is 4..63
868 * DIV valid range is 0..3
869 * round the min and max frequencies to values that would still
870 * produce valid brg and div
871 */
872 {
873 int min_div = (2 << 0) * (2 * (4 + 1));
874 int max_div = (2 << 3) * (2 * (63 + 1));
875 master->max_speed_hz = hw->pdata->mainclk_hz / min_div;
876 master->min_speed_hz =
877 hw->pdata->mainclk_hz / (max_div + 1) + 1;
878 }
879
880 au1550_spi_setup_psc_as_spi(hw);
881
882 err = spi_bitbang_start(&hw->bitbang);
883 if (err) {
884 dev_err(&pdev->dev, "Failed to register SPI master\n");
885 goto err_register;
886 }
887
888 dev_info(&pdev->dev,
889 "spi master registered: bus_num=%d num_chipselect=%d\n",
890 master->bus_num, master->num_chipselect);
891
892 return 0;
893
894err_register:
895 free_irq(hw->irq, hw);
896
897err_no_irq:
898 au1550_spi_dma_rxtmp_free(hw);
899
900err_dma_rxtmp_alloc:
901err_no_rxdma_descr:
902 if (hw->usedma)
903 au1xxx_dbdma_chan_free(hw->dma_rx_ch);
904
905err_no_rxdma:
906err_no_txdma_descr:
907 if (hw->usedma)
908 au1xxx_dbdma_chan_free(hw->dma_tx_ch);
909
910err_no_txdma:
911 iounmap((void __iomem *)hw->regs);
912
913err_ioremap:
914 release_mem_region(r->start, sizeof(psc_spi_t));
915
916err_no_iores:
917err_no_pdata:
918 spi_master_put(hw->master);
919
920err_nomem:
921 return err;
922}
923
924static int au1550_spi_remove(struct platform_device *pdev)
925{
926 struct au1550_spi *hw = platform_get_drvdata(pdev);
927
928 dev_info(&pdev->dev, "spi master remove: bus_num=%d\n",
929 hw->master->bus_num);
930
931 spi_bitbang_stop(&hw->bitbang);
932 free_irq(hw->irq, hw);
933 iounmap((void __iomem *)hw->regs);
934 release_mem_region(hw->ioarea->start, sizeof(psc_spi_t));
935
936 if (hw->usedma) {
937 au1550_spi_dma_rxtmp_free(hw);
938 au1xxx_dbdma_chan_free(hw->dma_rx_ch);
939 au1xxx_dbdma_chan_free(hw->dma_tx_ch);
940 }
941
942 spi_master_put(hw->master);
943 return 0;
944}
945
946/* work with hotplug and coldplug */
947MODULE_ALIAS("platform:au1550-spi");
948
949static struct platform_driver au1550_spi_drv = {
950 .probe = au1550_spi_probe,
951 .remove = au1550_spi_remove,
952 .driver = {
953 .name = "au1550-spi",
954 },
955};
956
957static int __init au1550_spi_init(void)
958{
959 /*
960 * create memory device with 8 bits dev_devwidth
961 * needed for proper byte ordering to spi fifo
962 */
963 switch (alchemy_get_cputype()) {
964 case ALCHEMY_CPU_AU1550:
965 case ALCHEMY_CPU_AU1200:
966 case ALCHEMY_CPU_AU1300:
967 break;
968 default:
969 return -ENODEV;
970 }
971
972 if (usedma) {
973 ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
974 if (!ddma_memid)
975 printk(KERN_ERR "au1550-spi: cannot add memory"
976 "dbdma device\n");
977 }
978 return platform_driver_register(&au1550_spi_drv);
979}
980module_init(au1550_spi_init);
981
982static void __exit au1550_spi_exit(void)
983{
984 if (usedma && ddma_memid)
985 au1xxx_ddma_del_device(ddma_memid);
986 platform_driver_unregister(&au1550_spi_drv);
987}
988module_exit(au1550_spi_exit);
989
990MODULE_DESCRIPTION("Au1550 PSC SPI Driver");
991MODULE_AUTHOR("Jan Nikitenko <jan.nikitenko@gmail.com>");
992MODULE_LICENSE("GPL");