Loading...
1/*
2 * CAN bus driver for Bosch C_CAN controller
3 *
4 * Copyright (C) 2010 ST Microelectronics
5 * Bhupesh Sharma <bhupesh.sharma@st.com>
6 *
7 * Borrowed heavily from the C_CAN driver originally written by:
8 * Copyright (C) 2007
9 * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
10 * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
11 *
12 * TX and RX NAPI implementation has been borrowed from at91 CAN driver
13 * written by:
14 * Copyright
15 * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
16 * (C) 2008, 2009 by Marc Kleine-Budde <kernel@pengutronix.de>
17 *
18 * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
19 * Bosch C_CAN user manual can be obtained from:
20 * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
21 * users_manual_c_can.pdf
22 *
23 * This file is licensed under the terms of the GNU General Public
24 * License version 2. This program is licensed "as is" without any
25 * warranty of any kind, whether express or implied.
26 */
27
28#include <linux/kernel.h>
29#include <linux/module.h>
30#include <linux/interrupt.h>
31#include <linux/delay.h>
32#include <linux/netdevice.h>
33#include <linux/if_arp.h>
34#include <linux/if_ether.h>
35#include <linux/list.h>
36#include <linux/io.h>
37#include <linux/pm_runtime.h>
38#include <linux/pinctrl/consumer.h>
39
40#include <linux/can.h>
41#include <linux/can/dev.h>
42#include <linux/can/error.h>
43#include <linux/can/led.h>
44
45#include "c_can.h"
46
47/* Number of interface registers */
48#define IF_ENUM_REG_LEN 11
49#define C_CAN_IFACE(reg, iface) (C_CAN_IF1_##reg + (iface) * IF_ENUM_REG_LEN)
50
51/* control extension register D_CAN specific */
52#define CONTROL_EX_PDR BIT(8)
53
54/* control register */
55#define CONTROL_TEST BIT(7)
56#define CONTROL_CCE BIT(6)
57#define CONTROL_DISABLE_AR BIT(5)
58#define CONTROL_ENABLE_AR (0 << 5)
59#define CONTROL_EIE BIT(3)
60#define CONTROL_SIE BIT(2)
61#define CONTROL_IE BIT(1)
62#define CONTROL_INIT BIT(0)
63
64#define CONTROL_IRQMSK (CONTROL_EIE | CONTROL_IE | CONTROL_SIE)
65
66/* test register */
67#define TEST_RX BIT(7)
68#define TEST_TX1 BIT(6)
69#define TEST_TX2 BIT(5)
70#define TEST_LBACK BIT(4)
71#define TEST_SILENT BIT(3)
72#define TEST_BASIC BIT(2)
73
74/* status register */
75#define STATUS_PDA BIT(10)
76#define STATUS_BOFF BIT(7)
77#define STATUS_EWARN BIT(6)
78#define STATUS_EPASS BIT(5)
79#define STATUS_RXOK BIT(4)
80#define STATUS_TXOK BIT(3)
81
82/* error counter register */
83#define ERR_CNT_TEC_MASK 0xff
84#define ERR_CNT_TEC_SHIFT 0
85#define ERR_CNT_REC_SHIFT 8
86#define ERR_CNT_REC_MASK (0x7f << ERR_CNT_REC_SHIFT)
87#define ERR_CNT_RP_SHIFT 15
88#define ERR_CNT_RP_MASK (0x1 << ERR_CNT_RP_SHIFT)
89
90/* bit-timing register */
91#define BTR_BRP_MASK 0x3f
92#define BTR_BRP_SHIFT 0
93#define BTR_SJW_SHIFT 6
94#define BTR_SJW_MASK (0x3 << BTR_SJW_SHIFT)
95#define BTR_TSEG1_SHIFT 8
96#define BTR_TSEG1_MASK (0xf << BTR_TSEG1_SHIFT)
97#define BTR_TSEG2_SHIFT 12
98#define BTR_TSEG2_MASK (0x7 << BTR_TSEG2_SHIFT)
99
100/* brp extension register */
101#define BRP_EXT_BRPE_MASK 0x0f
102#define BRP_EXT_BRPE_SHIFT 0
103
104/* IFx command request */
105#define IF_COMR_BUSY BIT(15)
106
107/* IFx command mask */
108#define IF_COMM_WR BIT(7)
109#define IF_COMM_MASK BIT(6)
110#define IF_COMM_ARB BIT(5)
111#define IF_COMM_CONTROL BIT(4)
112#define IF_COMM_CLR_INT_PND BIT(3)
113#define IF_COMM_TXRQST BIT(2)
114#define IF_COMM_CLR_NEWDAT IF_COMM_TXRQST
115#define IF_COMM_DATAA BIT(1)
116#define IF_COMM_DATAB BIT(0)
117
118/* TX buffer setup */
119#define IF_COMM_TX (IF_COMM_ARB | IF_COMM_CONTROL | \
120 IF_COMM_TXRQST | \
121 IF_COMM_DATAA | IF_COMM_DATAB)
122
123/* For the low buffers we clear the interrupt bit, but keep newdat */
124#define IF_COMM_RCV_LOW (IF_COMM_MASK | IF_COMM_ARB | \
125 IF_COMM_CONTROL | IF_COMM_CLR_INT_PND | \
126 IF_COMM_DATAA | IF_COMM_DATAB)
127
128/* For the high buffers we clear the interrupt bit and newdat */
129#define IF_COMM_RCV_HIGH (IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT)
130
131
132/* Receive setup of message objects */
133#define IF_COMM_RCV_SETUP (IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL)
134
135/* Invalidation of message objects */
136#define IF_COMM_INVAL (IF_COMM_ARB | IF_COMM_CONTROL)
137
138/* IFx arbitration */
139#define IF_ARB_MSGVAL BIT(31)
140#define IF_ARB_MSGXTD BIT(30)
141#define IF_ARB_TRANSMIT BIT(29)
142
143/* IFx message control */
144#define IF_MCONT_NEWDAT BIT(15)
145#define IF_MCONT_MSGLST BIT(14)
146#define IF_MCONT_INTPND BIT(13)
147#define IF_MCONT_UMASK BIT(12)
148#define IF_MCONT_TXIE BIT(11)
149#define IF_MCONT_RXIE BIT(10)
150#define IF_MCONT_RMTEN BIT(9)
151#define IF_MCONT_TXRQST BIT(8)
152#define IF_MCONT_EOB BIT(7)
153#define IF_MCONT_DLC_MASK 0xf
154
155#define IF_MCONT_RCV (IF_MCONT_RXIE | IF_MCONT_UMASK)
156#define IF_MCONT_RCV_EOB (IF_MCONT_RCV | IF_MCONT_EOB)
157
158#define IF_MCONT_TX (IF_MCONT_TXIE | IF_MCONT_EOB)
159
160/*
161 * Use IF1 for RX and IF2 for TX
162 */
163#define IF_RX 0
164#define IF_TX 1
165
166/* minimum timeout for checking BUSY status */
167#define MIN_TIMEOUT_VALUE 6
168
169/* Wait for ~1 sec for INIT bit */
170#define INIT_WAIT_MS 1000
171
172/* napi related */
173#define C_CAN_NAPI_WEIGHT C_CAN_MSG_OBJ_RX_NUM
174
175/* c_can lec values */
176enum c_can_lec_type {
177 LEC_NO_ERROR = 0,
178 LEC_STUFF_ERROR,
179 LEC_FORM_ERROR,
180 LEC_ACK_ERROR,
181 LEC_BIT1_ERROR,
182 LEC_BIT0_ERROR,
183 LEC_CRC_ERROR,
184 LEC_UNUSED,
185 LEC_MASK = LEC_UNUSED,
186};
187
188/*
189 * c_can error types:
190 * Bus errors (BUS_OFF, ERROR_WARNING, ERROR_PASSIVE) are supported
191 */
192enum c_can_bus_error_types {
193 C_CAN_NO_ERROR = 0,
194 C_CAN_BUS_OFF,
195 C_CAN_ERROR_WARNING,
196 C_CAN_ERROR_PASSIVE,
197};
198
199static const struct can_bittiming_const c_can_bittiming_const = {
200 .name = KBUILD_MODNAME,
201 .tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */
202 .tseg1_max = 16,
203 .tseg2_min = 1, /* Time segment 2 = phase_seg2 */
204 .tseg2_max = 8,
205 .sjw_max = 4,
206 .brp_min = 1,
207 .brp_max = 1024, /* 6-bit BRP field + 4-bit BRPE field*/
208 .brp_inc = 1,
209};
210
211static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv)
212{
213 if (priv->device)
214 pm_runtime_enable(priv->device);
215}
216
217static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv)
218{
219 if (priv->device)
220 pm_runtime_disable(priv->device);
221}
222
223static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv)
224{
225 if (priv->device)
226 pm_runtime_get_sync(priv->device);
227}
228
229static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv)
230{
231 if (priv->device)
232 pm_runtime_put_sync(priv->device);
233}
234
235static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable)
236{
237 if (priv->raminit)
238 priv->raminit(priv, enable);
239}
240
241static void c_can_irq_control(struct c_can_priv *priv, bool enable)
242{
243 u32 ctrl = priv->read_reg(priv, C_CAN_CTRL_REG) & ~CONTROL_IRQMSK;
244
245 if (enable)
246 ctrl |= CONTROL_IRQMSK;
247
248 priv->write_reg(priv, C_CAN_CTRL_REG, ctrl);
249}
250
251static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj)
252{
253 struct c_can_priv *priv = netdev_priv(dev);
254 int cnt, reg = C_CAN_IFACE(COMREQ_REG, iface);
255
256 priv->write_reg32(priv, reg, (cmd << 16) | obj);
257
258 for (cnt = MIN_TIMEOUT_VALUE; cnt; cnt--) {
259 if (!(priv->read_reg(priv, reg) & IF_COMR_BUSY))
260 return;
261 udelay(1);
262 }
263 netdev_err(dev, "Updating object timed out\n");
264
265}
266
267static inline void c_can_object_get(struct net_device *dev, int iface,
268 u32 obj, u32 cmd)
269{
270 c_can_obj_update(dev, iface, cmd, obj);
271}
272
273static inline void c_can_object_put(struct net_device *dev, int iface,
274 u32 obj, u32 cmd)
275{
276 c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj);
277}
278
279/*
280 * Note: According to documentation clearing TXIE while MSGVAL is set
281 * is not allowed, but works nicely on C/DCAN. And that lowers the I/O
282 * load significantly.
283 */
284static void c_can_inval_tx_object(struct net_device *dev, int iface, int obj)
285{
286 struct c_can_priv *priv = netdev_priv(dev);
287
288 priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0);
289 c_can_object_put(dev, iface, obj, IF_COMM_INVAL);
290}
291
292static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj)
293{
294 struct c_can_priv *priv = netdev_priv(dev);
295
296 priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
297 priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0);
298 c_can_inval_tx_object(dev, iface, obj);
299}
300
301static void c_can_setup_tx_object(struct net_device *dev, int iface,
302 struct can_frame *frame, int idx)
303{
304 struct c_can_priv *priv = netdev_priv(dev);
305 u16 ctrl = IF_MCONT_TX | frame->can_dlc;
306 bool rtr = frame->can_id & CAN_RTR_FLAG;
307 u32 arb = IF_ARB_MSGVAL;
308 int i;
309
310 if (frame->can_id & CAN_EFF_FLAG) {
311 arb |= frame->can_id & CAN_EFF_MASK;
312 arb |= IF_ARB_MSGXTD;
313 } else {
314 arb |= (frame->can_id & CAN_SFF_MASK) << 18;
315 }
316
317 if (!rtr)
318 arb |= IF_ARB_TRANSMIT;
319
320 /*
321 * If we change the DIR bit, we need to invalidate the buffer
322 * first, i.e. clear the MSGVAL flag in the arbiter.
323 */
324 if (rtr != (bool)test_bit(idx, &priv->tx_dir)) {
325 u32 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
326
327 c_can_inval_msg_object(dev, iface, obj);
328 change_bit(idx, &priv->tx_dir);
329 }
330
331 priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), arb);
332
333 priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
334
335 for (i = 0; i < frame->can_dlc; i += 2) {
336 priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2,
337 frame->data[i] | (frame->data[i + 1] << 8));
338 }
339}
340
341static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev,
342 int iface)
343{
344 int i;
345
346 for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++)
347 c_can_object_get(dev, iface, i, IF_COMM_CLR_NEWDAT);
348}
349
350static int c_can_handle_lost_msg_obj(struct net_device *dev,
351 int iface, int objno, u32 ctrl)
352{
353 struct net_device_stats *stats = &dev->stats;
354 struct c_can_priv *priv = netdev_priv(dev);
355 struct can_frame *frame;
356 struct sk_buff *skb;
357
358 ctrl &= ~(IF_MCONT_MSGLST | IF_MCONT_INTPND | IF_MCONT_NEWDAT);
359 priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
360 c_can_object_put(dev, iface, objno, IF_COMM_CONTROL);
361
362 stats->rx_errors++;
363 stats->rx_over_errors++;
364
365 /* create an error msg */
366 skb = alloc_can_err_skb(dev, &frame);
367 if (unlikely(!skb))
368 return 0;
369
370 frame->can_id |= CAN_ERR_CRTL;
371 frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
372
373 netif_receive_skb(skb);
374 return 1;
375}
376
377static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl)
378{
379 struct net_device_stats *stats = &dev->stats;
380 struct c_can_priv *priv = netdev_priv(dev);
381 struct can_frame *frame;
382 struct sk_buff *skb;
383 u32 arb, data;
384
385 skb = alloc_can_skb(dev, &frame);
386 if (!skb) {
387 stats->rx_dropped++;
388 return -ENOMEM;
389 }
390
391 frame->can_dlc = get_can_dlc(ctrl & 0x0F);
392
393 arb = priv->read_reg32(priv, C_CAN_IFACE(ARB1_REG, iface));
394
395 if (arb & IF_ARB_MSGXTD)
396 frame->can_id = (arb & CAN_EFF_MASK) | CAN_EFF_FLAG;
397 else
398 frame->can_id = (arb >> 18) & CAN_SFF_MASK;
399
400 if (arb & IF_ARB_TRANSMIT) {
401 frame->can_id |= CAN_RTR_FLAG;
402 } else {
403 int i, dreg = C_CAN_IFACE(DATA1_REG, iface);
404
405 for (i = 0; i < frame->can_dlc; i += 2, dreg ++) {
406 data = priv->read_reg(priv, dreg);
407 frame->data[i] = data;
408 frame->data[i + 1] = data >> 8;
409 }
410 }
411
412 stats->rx_packets++;
413 stats->rx_bytes += frame->can_dlc;
414
415 netif_receive_skb(skb);
416 return 0;
417}
418
419static void c_can_setup_receive_object(struct net_device *dev, int iface,
420 u32 obj, u32 mask, u32 id, u32 mcont)
421{
422 struct c_can_priv *priv = netdev_priv(dev);
423
424 mask |= BIT(29);
425 priv->write_reg32(priv, C_CAN_IFACE(MASK1_REG, iface), mask);
426
427 id |= IF_ARB_MSGVAL;
428 priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), id);
429
430 priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), mcont);
431 c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP);
432}
433
434static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
435 struct net_device *dev)
436{
437 struct can_frame *frame = (struct can_frame *)skb->data;
438 struct c_can_priv *priv = netdev_priv(dev);
439 u32 idx, obj;
440
441 if (can_dropped_invalid_skb(dev, skb))
442 return NETDEV_TX_OK;
443 /*
444 * This is not a FIFO. C/D_CAN sends out the buffers
445 * prioritized. The lowest buffer number wins.
446 */
447 idx = fls(atomic_read(&priv->tx_active));
448 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
449
450 /* If this is the last buffer, stop the xmit queue */
451 if (idx == C_CAN_MSG_OBJ_TX_NUM - 1)
452 netif_stop_queue(dev);
453 /*
454 * Store the message in the interface so we can call
455 * can_put_echo_skb(). We must do this before we enable
456 * transmit as we might race against do_tx().
457 */
458 c_can_setup_tx_object(dev, IF_TX, frame, idx);
459 priv->dlc[idx] = frame->can_dlc;
460 can_put_echo_skb(skb, dev, idx);
461
462 /* Update the active bits */
463 atomic_add((1 << idx), &priv->tx_active);
464 /* Start transmission */
465 c_can_object_put(dev, IF_TX, obj, IF_COMM_TX);
466
467 return NETDEV_TX_OK;
468}
469
470static int c_can_wait_for_ctrl_init(struct net_device *dev,
471 struct c_can_priv *priv, u32 init)
472{
473 int retry = 0;
474
475 while (init != (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_INIT)) {
476 udelay(10);
477 if (retry++ > 1000) {
478 netdev_err(dev, "CCTRL: set CONTROL_INIT failed\n");
479 return -EIO;
480 }
481 }
482 return 0;
483}
484
485static int c_can_set_bittiming(struct net_device *dev)
486{
487 unsigned int reg_btr, reg_brpe, ctrl_save;
488 u8 brp, brpe, sjw, tseg1, tseg2;
489 u32 ten_bit_brp;
490 struct c_can_priv *priv = netdev_priv(dev);
491 const struct can_bittiming *bt = &priv->can.bittiming;
492 int res;
493
494 /* c_can provides a 6-bit brp and 4-bit brpe fields */
495 ten_bit_brp = bt->brp - 1;
496 brp = ten_bit_brp & BTR_BRP_MASK;
497 brpe = ten_bit_brp >> 6;
498
499 sjw = bt->sjw - 1;
500 tseg1 = bt->prop_seg + bt->phase_seg1 - 1;
501 tseg2 = bt->phase_seg2 - 1;
502 reg_btr = brp | (sjw << BTR_SJW_SHIFT) | (tseg1 << BTR_TSEG1_SHIFT) |
503 (tseg2 << BTR_TSEG2_SHIFT);
504 reg_brpe = brpe & BRP_EXT_BRPE_MASK;
505
506 netdev_info(dev,
507 "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe);
508
509 ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG);
510 ctrl_save &= ~CONTROL_INIT;
511 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_CCE | CONTROL_INIT);
512 res = c_can_wait_for_ctrl_init(dev, priv, CONTROL_INIT);
513 if (res)
514 return res;
515
516 priv->write_reg(priv, C_CAN_BTR_REG, reg_btr);
517 priv->write_reg(priv, C_CAN_BRPEXT_REG, reg_brpe);
518 priv->write_reg(priv, C_CAN_CTRL_REG, ctrl_save);
519
520 return c_can_wait_for_ctrl_init(dev, priv, 0);
521}
522
523/*
524 * Configure C_CAN message objects for Tx and Rx purposes:
525 * C_CAN provides a total of 32 message objects that can be configured
526 * either for Tx or Rx purposes. Here the first 16 message objects are used as
527 * a reception FIFO. The end of reception FIFO is signified by the EoB bit
528 * being SET. The remaining 16 message objects are kept aside for Tx purposes.
529 * See user guide document for further details on configuring message
530 * objects.
531 */
532static void c_can_configure_msg_objects(struct net_device *dev)
533{
534 int i;
535
536 /* first invalidate all message objects */
537 for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_NO_OF_OBJECTS; i++)
538 c_can_inval_msg_object(dev, IF_RX, i);
539
540 /* setup receive message objects */
541 for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++)
542 c_can_setup_receive_object(dev, IF_RX, i, 0, 0, IF_MCONT_RCV);
543
544 c_can_setup_receive_object(dev, IF_RX, C_CAN_MSG_OBJ_RX_LAST, 0, 0,
545 IF_MCONT_RCV_EOB);
546}
547
548/*
549 * Configure C_CAN chip:
550 * - enable/disable auto-retransmission
551 * - set operating mode
552 * - configure message objects
553 */
554static int c_can_chip_config(struct net_device *dev)
555{
556 struct c_can_priv *priv = netdev_priv(dev);
557
558 /* enable automatic retransmission */
559 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR);
560
561 if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
562 (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
563 /* loopback + silent mode : useful for hot self-test */
564 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
565 priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT);
566 } else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
567 /* loopback mode : useful for self-test function */
568 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
569 priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK);
570 } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) {
571 /* silent mode : bus-monitoring mode */
572 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
573 priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT);
574 }
575
576 /* configure message objects */
577 c_can_configure_msg_objects(dev);
578
579 /* set a `lec` value so that we can check for updates later */
580 priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
581
582 /* Clear all internal status */
583 atomic_set(&priv->tx_active, 0);
584 priv->rxmasked = 0;
585 priv->tx_dir = 0;
586
587 /* set bittiming params */
588 return c_can_set_bittiming(dev);
589}
590
591static int c_can_start(struct net_device *dev)
592{
593 struct c_can_priv *priv = netdev_priv(dev);
594 int err;
595 struct pinctrl *p;
596
597 /* basic c_can configuration */
598 err = c_can_chip_config(dev);
599 if (err)
600 return err;
601
602 /* Setup the command for new messages */
603 priv->comm_rcv_high = priv->type != BOSCH_D_CAN ?
604 IF_COMM_RCV_LOW : IF_COMM_RCV_HIGH;
605
606 priv->can.state = CAN_STATE_ERROR_ACTIVE;
607
608 /* Attempt to use "active" if available else use "default" */
609 p = pinctrl_get_select(priv->device, "active");
610 if (!IS_ERR(p))
611 pinctrl_put(p);
612 else
613 pinctrl_pm_select_default_state(priv->device);
614
615 return 0;
616}
617
618static void c_can_stop(struct net_device *dev)
619{
620 struct c_can_priv *priv = netdev_priv(dev);
621
622 c_can_irq_control(priv, false);
623
624 /* put ctrl to init on stop to end ongoing transmission */
625 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_INIT);
626
627 /* deactivate pins */
628 pinctrl_pm_select_sleep_state(dev->dev.parent);
629 priv->can.state = CAN_STATE_STOPPED;
630}
631
632static int c_can_set_mode(struct net_device *dev, enum can_mode mode)
633{
634 struct c_can_priv *priv = netdev_priv(dev);
635 int err;
636
637 switch (mode) {
638 case CAN_MODE_START:
639 err = c_can_start(dev);
640 if (err)
641 return err;
642 netif_wake_queue(dev);
643 c_can_irq_control(priv, true);
644 break;
645 default:
646 return -EOPNOTSUPP;
647 }
648
649 return 0;
650}
651
652static int __c_can_get_berr_counter(const struct net_device *dev,
653 struct can_berr_counter *bec)
654{
655 unsigned int reg_err_counter;
656 struct c_can_priv *priv = netdev_priv(dev);
657
658 reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
659 bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >>
660 ERR_CNT_REC_SHIFT;
661 bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK;
662
663 return 0;
664}
665
666static int c_can_get_berr_counter(const struct net_device *dev,
667 struct can_berr_counter *bec)
668{
669 struct c_can_priv *priv = netdev_priv(dev);
670 int err;
671
672 c_can_pm_runtime_get_sync(priv);
673 err = __c_can_get_berr_counter(dev, bec);
674 c_can_pm_runtime_put_sync(priv);
675
676 return err;
677}
678
679static void c_can_do_tx(struct net_device *dev)
680{
681 struct c_can_priv *priv = netdev_priv(dev);
682 struct net_device_stats *stats = &dev->stats;
683 u32 idx, obj, pkts = 0, bytes = 0, pend, clr;
684
685 clr = pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
686
687 while ((idx = ffs(pend))) {
688 idx--;
689 pend &= ~(1 << idx);
690 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
691 c_can_inval_tx_object(dev, IF_RX, obj);
692 can_get_echo_skb(dev, idx);
693 bytes += priv->dlc[idx];
694 pkts++;
695 }
696
697 /* Clear the bits in the tx_active mask */
698 atomic_sub(clr, &priv->tx_active);
699
700 if (clr & (1 << (C_CAN_MSG_OBJ_TX_NUM - 1)))
701 netif_wake_queue(dev);
702
703 if (pkts) {
704 stats->tx_bytes += bytes;
705 stats->tx_packets += pkts;
706 can_led_event(dev, CAN_LED_EVENT_TX);
707 }
708}
709
710/*
711 * If we have a gap in the pending bits, that means we either
712 * raced with the hardware or failed to readout all upper
713 * objects in the last run due to quota limit.
714 */
715static u32 c_can_adjust_pending(u32 pend)
716{
717 u32 weight, lasts;
718
719 if (pend == RECEIVE_OBJECT_BITS)
720 return pend;
721
722 /*
723 * If the last set bit is larger than the number of pending
724 * bits we have a gap.
725 */
726 weight = hweight32(pend);
727 lasts = fls(pend);
728
729 /* If the bits are linear, nothing to do */
730 if (lasts == weight)
731 return pend;
732
733 /*
734 * Find the first set bit after the gap. We walk backwards
735 * from the last set bit.
736 */
737 for (lasts--; pend & (1 << (lasts - 1)); lasts--);
738
739 return pend & ~((1 << lasts) - 1);
740}
741
742static inline void c_can_rx_object_get(struct net_device *dev,
743 struct c_can_priv *priv, u32 obj)
744{
745 c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high);
746}
747
748static inline void c_can_rx_finalize(struct net_device *dev,
749 struct c_can_priv *priv, u32 obj)
750{
751 if (priv->type != BOSCH_D_CAN)
752 c_can_object_get(dev, IF_RX, obj, IF_COMM_CLR_NEWDAT);
753}
754
755static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
756 u32 pend, int quota)
757{
758 u32 pkts = 0, ctrl, obj;
759
760 while ((obj = ffs(pend)) && quota > 0) {
761 pend &= ~BIT(obj - 1);
762
763 c_can_rx_object_get(dev, priv, obj);
764 ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_RX));
765
766 if (ctrl & IF_MCONT_MSGLST) {
767 int n = c_can_handle_lost_msg_obj(dev, IF_RX, obj, ctrl);
768
769 pkts += n;
770 quota -= n;
771 continue;
772 }
773
774 /*
775 * This really should not happen, but this covers some
776 * odd HW behaviour. Do not remove that unless you
777 * want to brick your machine.
778 */
779 if (!(ctrl & IF_MCONT_NEWDAT))
780 continue;
781
782 /* read the data from the message object */
783 c_can_read_msg_object(dev, IF_RX, ctrl);
784
785 c_can_rx_finalize(dev, priv, obj);
786
787 pkts++;
788 quota--;
789 }
790
791 return pkts;
792}
793
794static inline u32 c_can_get_pending(struct c_can_priv *priv)
795{
796 u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
797
798 return pend;
799}
800
801/*
802 * theory of operation:
803 *
804 * c_can core saves a received CAN message into the first free message
805 * object it finds free (starting with the lowest). Bits NEWDAT and
806 * INTPND are set for this message object indicating that a new message
807 * has arrived. To work-around this issue, we keep two groups of message
808 * objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT.
809 *
810 * We clear the newdat bit right away.
811 *
812 * This can result in packet reordering when the readout is slow.
813 */
814static int c_can_do_rx_poll(struct net_device *dev, int quota)
815{
816 struct c_can_priv *priv = netdev_priv(dev);
817 u32 pkts = 0, pend = 0, toread, n;
818
819 /*
820 * It is faster to read only one 16bit register. This is only possible
821 * for a maximum number of 16 objects.
822 */
823 BUILD_BUG_ON_MSG(C_CAN_MSG_OBJ_RX_LAST > 16,
824 "Implementation does not support more message objects than 16");
825
826 while (quota > 0) {
827 if (!pend) {
828 pend = c_can_get_pending(priv);
829 if (!pend)
830 break;
831 /*
832 * If the pending field has a gap, handle the
833 * bits above the gap first.
834 */
835 toread = c_can_adjust_pending(pend);
836 } else {
837 toread = pend;
838 }
839 /* Remove the bits from pend */
840 pend &= ~toread;
841 /* Read the objects */
842 n = c_can_read_objects(dev, priv, toread, quota);
843 pkts += n;
844 quota -= n;
845 }
846
847 if (pkts)
848 can_led_event(dev, CAN_LED_EVENT_RX);
849
850 return pkts;
851}
852
853static int c_can_handle_state_change(struct net_device *dev,
854 enum c_can_bus_error_types error_type)
855{
856 unsigned int reg_err_counter;
857 unsigned int rx_err_passive;
858 struct c_can_priv *priv = netdev_priv(dev);
859 struct net_device_stats *stats = &dev->stats;
860 struct can_frame *cf;
861 struct sk_buff *skb;
862 struct can_berr_counter bec;
863
864 switch (error_type) {
865 case C_CAN_ERROR_WARNING:
866 /* error warning state */
867 priv->can.can_stats.error_warning++;
868 priv->can.state = CAN_STATE_ERROR_WARNING;
869 break;
870 case C_CAN_ERROR_PASSIVE:
871 /* error passive state */
872 priv->can.can_stats.error_passive++;
873 priv->can.state = CAN_STATE_ERROR_PASSIVE;
874 break;
875 case C_CAN_BUS_OFF:
876 /* bus-off state */
877 priv->can.state = CAN_STATE_BUS_OFF;
878 priv->can.can_stats.bus_off++;
879 break;
880 default:
881 break;
882 }
883
884 /* propagate the error condition to the CAN stack */
885 skb = alloc_can_err_skb(dev, &cf);
886 if (unlikely(!skb))
887 return 0;
888
889 __c_can_get_berr_counter(dev, &bec);
890 reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
891 rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >>
892 ERR_CNT_RP_SHIFT;
893
894 switch (error_type) {
895 case C_CAN_ERROR_WARNING:
896 /* error warning state */
897 cf->can_id |= CAN_ERR_CRTL;
898 cf->data[1] = (bec.txerr > bec.rxerr) ?
899 CAN_ERR_CRTL_TX_WARNING :
900 CAN_ERR_CRTL_RX_WARNING;
901 cf->data[6] = bec.txerr;
902 cf->data[7] = bec.rxerr;
903
904 break;
905 case C_CAN_ERROR_PASSIVE:
906 /* error passive state */
907 cf->can_id |= CAN_ERR_CRTL;
908 if (rx_err_passive)
909 cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
910 if (bec.txerr > 127)
911 cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
912
913 cf->data[6] = bec.txerr;
914 cf->data[7] = bec.rxerr;
915 break;
916 case C_CAN_BUS_OFF:
917 /* bus-off state */
918 cf->can_id |= CAN_ERR_BUSOFF;
919 can_bus_off(dev);
920 break;
921 default:
922 break;
923 }
924
925 stats->rx_packets++;
926 stats->rx_bytes += cf->can_dlc;
927 netif_receive_skb(skb);
928
929 return 1;
930}
931
932static int c_can_handle_bus_err(struct net_device *dev,
933 enum c_can_lec_type lec_type)
934{
935 struct c_can_priv *priv = netdev_priv(dev);
936 struct net_device_stats *stats = &dev->stats;
937 struct can_frame *cf;
938 struct sk_buff *skb;
939
940 /*
941 * early exit if no lec update or no error.
942 * no lec update means that no CAN bus event has been detected
943 * since CPU wrote 0x7 value to status reg.
944 */
945 if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR)
946 return 0;
947
948 if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING))
949 return 0;
950
951 /* common for all type of bus errors */
952 priv->can.can_stats.bus_error++;
953 stats->rx_errors++;
954
955 /* propagate the error condition to the CAN stack */
956 skb = alloc_can_err_skb(dev, &cf);
957 if (unlikely(!skb))
958 return 0;
959
960 /*
961 * check for 'last error code' which tells us the
962 * type of the last error to occur on the CAN bus
963 */
964 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
965
966 switch (lec_type) {
967 case LEC_STUFF_ERROR:
968 netdev_dbg(dev, "stuff error\n");
969 cf->data[2] |= CAN_ERR_PROT_STUFF;
970 break;
971 case LEC_FORM_ERROR:
972 netdev_dbg(dev, "form error\n");
973 cf->data[2] |= CAN_ERR_PROT_FORM;
974 break;
975 case LEC_ACK_ERROR:
976 netdev_dbg(dev, "ack error\n");
977 cf->data[3] = CAN_ERR_PROT_LOC_ACK;
978 break;
979 case LEC_BIT1_ERROR:
980 netdev_dbg(dev, "bit1 error\n");
981 cf->data[2] |= CAN_ERR_PROT_BIT1;
982 break;
983 case LEC_BIT0_ERROR:
984 netdev_dbg(dev, "bit0 error\n");
985 cf->data[2] |= CAN_ERR_PROT_BIT0;
986 break;
987 case LEC_CRC_ERROR:
988 netdev_dbg(dev, "CRC error\n");
989 cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
990 break;
991 default:
992 break;
993 }
994
995 stats->rx_packets++;
996 stats->rx_bytes += cf->can_dlc;
997 netif_receive_skb(skb);
998 return 1;
999}
1000
1001static int c_can_poll(struct napi_struct *napi, int quota)
1002{
1003 struct net_device *dev = napi->dev;
1004 struct c_can_priv *priv = netdev_priv(dev);
1005 u16 curr, last = priv->last_status;
1006 int work_done = 0;
1007
1008 priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
1009 /* Ack status on C_CAN. D_CAN is self clearing */
1010 if (priv->type != BOSCH_D_CAN)
1011 priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
1012
1013 /* handle state changes */
1014 if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) {
1015 netdev_dbg(dev, "entered error warning state\n");
1016 work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING);
1017 }
1018
1019 if ((curr & STATUS_EPASS) && (!(last & STATUS_EPASS))) {
1020 netdev_dbg(dev, "entered error passive state\n");
1021 work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE);
1022 }
1023
1024 if ((curr & STATUS_BOFF) && (!(last & STATUS_BOFF))) {
1025 netdev_dbg(dev, "entered bus off state\n");
1026 work_done += c_can_handle_state_change(dev, C_CAN_BUS_OFF);
1027 goto end;
1028 }
1029
1030 /* handle bus recovery events */
1031 if ((!(curr & STATUS_BOFF)) && (last & STATUS_BOFF)) {
1032 netdev_dbg(dev, "left bus off state\n");
1033 priv->can.state = CAN_STATE_ERROR_ACTIVE;
1034 }
1035 if ((!(curr & STATUS_EPASS)) && (last & STATUS_EPASS)) {
1036 netdev_dbg(dev, "left error passive state\n");
1037 priv->can.state = CAN_STATE_ERROR_ACTIVE;
1038 }
1039
1040 /* handle lec errors on the bus */
1041 work_done += c_can_handle_bus_err(dev, curr & LEC_MASK);
1042
1043 /* Handle Tx/Rx events. We do this unconditionally */
1044 work_done += c_can_do_rx_poll(dev, (quota - work_done));
1045 c_can_do_tx(dev);
1046
1047end:
1048 if (work_done < quota) {
1049 napi_complete(napi);
1050 /* enable all IRQs if we are not in bus off state */
1051 if (priv->can.state != CAN_STATE_BUS_OFF)
1052 c_can_irq_control(priv, true);
1053 }
1054
1055 return work_done;
1056}
1057
1058static irqreturn_t c_can_isr(int irq, void *dev_id)
1059{
1060 struct net_device *dev = (struct net_device *)dev_id;
1061 struct c_can_priv *priv = netdev_priv(dev);
1062
1063 if (!priv->read_reg(priv, C_CAN_INT_REG))
1064 return IRQ_NONE;
1065
1066 /* disable all interrupts and schedule the NAPI */
1067 c_can_irq_control(priv, false);
1068 napi_schedule(&priv->napi);
1069
1070 return IRQ_HANDLED;
1071}
1072
1073static int c_can_open(struct net_device *dev)
1074{
1075 int err;
1076 struct c_can_priv *priv = netdev_priv(dev);
1077
1078 c_can_pm_runtime_get_sync(priv);
1079 c_can_reset_ram(priv, true);
1080
1081 /* open the can device */
1082 err = open_candev(dev);
1083 if (err) {
1084 netdev_err(dev, "failed to open can device\n");
1085 goto exit_open_fail;
1086 }
1087
1088 /* register interrupt handler */
1089 err = request_irq(dev->irq, &c_can_isr, IRQF_SHARED, dev->name,
1090 dev);
1091 if (err < 0) {
1092 netdev_err(dev, "failed to request interrupt\n");
1093 goto exit_irq_fail;
1094 }
1095
1096 /* start the c_can controller */
1097 err = c_can_start(dev);
1098 if (err)
1099 goto exit_start_fail;
1100
1101 can_led_event(dev, CAN_LED_EVENT_OPEN);
1102
1103 napi_enable(&priv->napi);
1104 /* enable status change, error and module interrupts */
1105 c_can_irq_control(priv, true);
1106 netif_start_queue(dev);
1107
1108 return 0;
1109
1110exit_start_fail:
1111 free_irq(dev->irq, dev);
1112exit_irq_fail:
1113 close_candev(dev);
1114exit_open_fail:
1115 c_can_reset_ram(priv, false);
1116 c_can_pm_runtime_put_sync(priv);
1117 return err;
1118}
1119
1120static int c_can_close(struct net_device *dev)
1121{
1122 struct c_can_priv *priv = netdev_priv(dev);
1123
1124 netif_stop_queue(dev);
1125 napi_disable(&priv->napi);
1126 c_can_stop(dev);
1127 free_irq(dev->irq, dev);
1128 close_candev(dev);
1129
1130 c_can_reset_ram(priv, false);
1131 c_can_pm_runtime_put_sync(priv);
1132
1133 can_led_event(dev, CAN_LED_EVENT_STOP);
1134
1135 return 0;
1136}
1137
1138struct net_device *alloc_c_can_dev(void)
1139{
1140 struct net_device *dev;
1141 struct c_can_priv *priv;
1142
1143 dev = alloc_candev(sizeof(struct c_can_priv), C_CAN_MSG_OBJ_TX_NUM);
1144 if (!dev)
1145 return NULL;
1146
1147 priv = netdev_priv(dev);
1148 netif_napi_add(dev, &priv->napi, c_can_poll, C_CAN_NAPI_WEIGHT);
1149
1150 priv->dev = dev;
1151 priv->can.bittiming_const = &c_can_bittiming_const;
1152 priv->can.do_set_mode = c_can_set_mode;
1153 priv->can.do_get_berr_counter = c_can_get_berr_counter;
1154 priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
1155 CAN_CTRLMODE_LISTENONLY |
1156 CAN_CTRLMODE_BERR_REPORTING;
1157
1158 return dev;
1159}
1160EXPORT_SYMBOL_GPL(alloc_c_can_dev);
1161
1162#ifdef CONFIG_PM
1163int c_can_power_down(struct net_device *dev)
1164{
1165 u32 val;
1166 unsigned long time_out;
1167 struct c_can_priv *priv = netdev_priv(dev);
1168
1169 if (!(dev->flags & IFF_UP))
1170 return 0;
1171
1172 WARN_ON(priv->type != BOSCH_D_CAN);
1173
1174 /* set PDR value so the device goes to power down mode */
1175 val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);
1176 val |= CONTROL_EX_PDR;
1177 priv->write_reg(priv, C_CAN_CTRL_EX_REG, val);
1178
1179 /* Wait for the PDA bit to get set */
1180 time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
1181 while (!(priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
1182 time_after(time_out, jiffies))
1183 cpu_relax();
1184
1185 if (time_after(jiffies, time_out))
1186 return -ETIMEDOUT;
1187
1188 c_can_stop(dev);
1189
1190 c_can_reset_ram(priv, false);
1191 c_can_pm_runtime_put_sync(priv);
1192
1193 return 0;
1194}
1195EXPORT_SYMBOL_GPL(c_can_power_down);
1196
1197int c_can_power_up(struct net_device *dev)
1198{
1199 u32 val;
1200 unsigned long time_out;
1201 struct c_can_priv *priv = netdev_priv(dev);
1202 int ret;
1203
1204 if (!(dev->flags & IFF_UP))
1205 return 0;
1206
1207 WARN_ON(priv->type != BOSCH_D_CAN);
1208
1209 c_can_pm_runtime_get_sync(priv);
1210 c_can_reset_ram(priv, true);
1211
1212 /* Clear PDR and INIT bits */
1213 val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);
1214 val &= ~CONTROL_EX_PDR;
1215 priv->write_reg(priv, C_CAN_CTRL_EX_REG, val);
1216 val = priv->read_reg(priv, C_CAN_CTRL_REG);
1217 val &= ~CONTROL_INIT;
1218 priv->write_reg(priv, C_CAN_CTRL_REG, val);
1219
1220 /* Wait for the PDA bit to get clear */
1221 time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
1222 while ((priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
1223 time_after(time_out, jiffies))
1224 cpu_relax();
1225
1226 if (time_after(jiffies, time_out))
1227 return -ETIMEDOUT;
1228
1229 ret = c_can_start(dev);
1230 if (!ret)
1231 c_can_irq_control(priv, true);
1232
1233 return ret;
1234}
1235EXPORT_SYMBOL_GPL(c_can_power_up);
1236#endif
1237
1238void free_c_can_dev(struct net_device *dev)
1239{
1240 struct c_can_priv *priv = netdev_priv(dev);
1241
1242 netif_napi_del(&priv->napi);
1243 free_candev(dev);
1244}
1245EXPORT_SYMBOL_GPL(free_c_can_dev);
1246
1247static const struct net_device_ops c_can_netdev_ops = {
1248 .ndo_open = c_can_open,
1249 .ndo_stop = c_can_close,
1250 .ndo_start_xmit = c_can_start_xmit,
1251 .ndo_change_mtu = can_change_mtu,
1252};
1253
1254int register_c_can_dev(struct net_device *dev)
1255{
1256 struct c_can_priv *priv = netdev_priv(dev);
1257 int err;
1258
1259 /* Deactivate pins to prevent DRA7 DCAN IP from being
1260 * stuck in transition when module is disabled.
1261 * Pins are activated in c_can_start() and deactivated
1262 * in c_can_stop()
1263 */
1264 pinctrl_pm_select_sleep_state(dev->dev.parent);
1265
1266 c_can_pm_runtime_enable(priv);
1267
1268 dev->flags |= IFF_ECHO; /* we support local echo */
1269 dev->netdev_ops = &c_can_netdev_ops;
1270
1271 err = register_candev(dev);
1272 if (err)
1273 c_can_pm_runtime_disable(priv);
1274 else
1275 devm_can_led_init(dev);
1276
1277 return err;
1278}
1279EXPORT_SYMBOL_GPL(register_c_can_dev);
1280
1281void unregister_c_can_dev(struct net_device *dev)
1282{
1283 struct c_can_priv *priv = netdev_priv(dev);
1284
1285 unregister_candev(dev);
1286
1287 c_can_pm_runtime_disable(priv);
1288}
1289EXPORT_SYMBOL_GPL(unregister_c_can_dev);
1290
1291MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>");
1292MODULE_LICENSE("GPL v2");
1293MODULE_DESCRIPTION("CAN bus driver for Bosch C_CAN controller");
1/*
2 * CAN bus driver for Bosch C_CAN controller
3 *
4 * Copyright (C) 2010 ST Microelectronics
5 * Bhupesh Sharma <bhupesh.sharma@st.com>
6 *
7 * Borrowed heavily from the C_CAN driver originally written by:
8 * Copyright (C) 2007
9 * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
10 * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
11 *
12 * TX and RX NAPI implementation has been borrowed from at91 CAN driver
13 * written by:
14 * Copyright
15 * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
16 * (C) 2008, 2009 by Marc Kleine-Budde <kernel@pengutronix.de>
17 *
18 * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
19 * Bosch C_CAN user manual can be obtained from:
20 * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
21 * users_manual_c_can.pdf
22 *
23 * This file is licensed under the terms of the GNU General Public
24 * License version 2. This program is licensed "as is" without any
25 * warranty of any kind, whether express or implied.
26 */
27
28#include <linux/kernel.h>
29#include <linux/module.h>
30#include <linux/interrupt.h>
31#include <linux/delay.h>
32#include <linux/netdevice.h>
33#include <linux/if_arp.h>
34#include <linux/if_ether.h>
35#include <linux/list.h>
36#include <linux/io.h>
37#include <linux/pm_runtime.h>
38#include <linux/pinctrl/consumer.h>
39
40#include <linux/can.h>
41#include <linux/can/dev.h>
42#include <linux/can/error.h>
43#include <linux/can/led.h>
44
45#include "c_can.h"
46
47/* Number of interface registers */
48#define IF_ENUM_REG_LEN 11
49#define C_CAN_IFACE(reg, iface) (C_CAN_IF1_##reg + (iface) * IF_ENUM_REG_LEN)
50
51/* control extension register D_CAN specific */
52#define CONTROL_EX_PDR BIT(8)
53
54/* control register */
55#define CONTROL_SWR BIT(15)
56#define CONTROL_TEST BIT(7)
57#define CONTROL_CCE BIT(6)
58#define CONTROL_DISABLE_AR BIT(5)
59#define CONTROL_ENABLE_AR (0 << 5)
60#define CONTROL_EIE BIT(3)
61#define CONTROL_SIE BIT(2)
62#define CONTROL_IE BIT(1)
63#define CONTROL_INIT BIT(0)
64
65#define CONTROL_IRQMSK (CONTROL_EIE | CONTROL_IE | CONTROL_SIE)
66
67/* test register */
68#define TEST_RX BIT(7)
69#define TEST_TX1 BIT(6)
70#define TEST_TX2 BIT(5)
71#define TEST_LBACK BIT(4)
72#define TEST_SILENT BIT(3)
73#define TEST_BASIC BIT(2)
74
75/* status register */
76#define STATUS_PDA BIT(10)
77#define STATUS_BOFF BIT(7)
78#define STATUS_EWARN BIT(6)
79#define STATUS_EPASS BIT(5)
80#define STATUS_RXOK BIT(4)
81#define STATUS_TXOK BIT(3)
82
83/* error counter register */
84#define ERR_CNT_TEC_MASK 0xff
85#define ERR_CNT_TEC_SHIFT 0
86#define ERR_CNT_REC_SHIFT 8
87#define ERR_CNT_REC_MASK (0x7f << ERR_CNT_REC_SHIFT)
88#define ERR_CNT_RP_SHIFT 15
89#define ERR_CNT_RP_MASK (0x1 << ERR_CNT_RP_SHIFT)
90
91/* bit-timing register */
92#define BTR_BRP_MASK 0x3f
93#define BTR_BRP_SHIFT 0
94#define BTR_SJW_SHIFT 6
95#define BTR_SJW_MASK (0x3 << BTR_SJW_SHIFT)
96#define BTR_TSEG1_SHIFT 8
97#define BTR_TSEG1_MASK (0xf << BTR_TSEG1_SHIFT)
98#define BTR_TSEG2_SHIFT 12
99#define BTR_TSEG2_MASK (0x7 << BTR_TSEG2_SHIFT)
100
101/* interrupt register */
102#define INT_STS_PENDING 0x8000
103
104/* brp extension register */
105#define BRP_EXT_BRPE_MASK 0x0f
106#define BRP_EXT_BRPE_SHIFT 0
107
108/* IFx command request */
109#define IF_COMR_BUSY BIT(15)
110
111/* IFx command mask */
112#define IF_COMM_WR BIT(7)
113#define IF_COMM_MASK BIT(6)
114#define IF_COMM_ARB BIT(5)
115#define IF_COMM_CONTROL BIT(4)
116#define IF_COMM_CLR_INT_PND BIT(3)
117#define IF_COMM_TXRQST BIT(2)
118#define IF_COMM_CLR_NEWDAT IF_COMM_TXRQST
119#define IF_COMM_DATAA BIT(1)
120#define IF_COMM_DATAB BIT(0)
121
122/* TX buffer setup */
123#define IF_COMM_TX (IF_COMM_ARB | IF_COMM_CONTROL | \
124 IF_COMM_TXRQST | \
125 IF_COMM_DATAA | IF_COMM_DATAB)
126
127/* For the low buffers we clear the interrupt bit, but keep newdat */
128#define IF_COMM_RCV_LOW (IF_COMM_MASK | IF_COMM_ARB | \
129 IF_COMM_CONTROL | IF_COMM_CLR_INT_PND | \
130 IF_COMM_DATAA | IF_COMM_DATAB)
131
132/* For the high buffers we clear the interrupt bit and newdat */
133#define IF_COMM_RCV_HIGH (IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT)
134
135
136/* Receive setup of message objects */
137#define IF_COMM_RCV_SETUP (IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL)
138
139/* Invalidation of message objects */
140#define IF_COMM_INVAL (IF_COMM_ARB | IF_COMM_CONTROL)
141
142/* IFx arbitration */
143#define IF_ARB_MSGVAL BIT(31)
144#define IF_ARB_MSGXTD BIT(30)
145#define IF_ARB_TRANSMIT BIT(29)
146
147/* IFx message control */
148#define IF_MCONT_NEWDAT BIT(15)
149#define IF_MCONT_MSGLST BIT(14)
150#define IF_MCONT_INTPND BIT(13)
151#define IF_MCONT_UMASK BIT(12)
152#define IF_MCONT_TXIE BIT(11)
153#define IF_MCONT_RXIE BIT(10)
154#define IF_MCONT_RMTEN BIT(9)
155#define IF_MCONT_TXRQST BIT(8)
156#define IF_MCONT_EOB BIT(7)
157#define IF_MCONT_DLC_MASK 0xf
158
159#define IF_MCONT_RCV (IF_MCONT_RXIE | IF_MCONT_UMASK)
160#define IF_MCONT_RCV_EOB (IF_MCONT_RCV | IF_MCONT_EOB)
161
162#define IF_MCONT_TX (IF_MCONT_TXIE | IF_MCONT_EOB)
163
164/*
165 * Use IF1 for RX and IF2 for TX
166 */
167#define IF_RX 0
168#define IF_TX 1
169
170/* minimum timeout for checking BUSY status */
171#define MIN_TIMEOUT_VALUE 6
172
173/* Wait for ~1 sec for INIT bit */
174#define INIT_WAIT_MS 1000
175
176/* napi related */
177#define C_CAN_NAPI_WEIGHT C_CAN_MSG_OBJ_RX_NUM
178
179/* c_can lec values */
180enum c_can_lec_type {
181 LEC_NO_ERROR = 0,
182 LEC_STUFF_ERROR,
183 LEC_FORM_ERROR,
184 LEC_ACK_ERROR,
185 LEC_BIT1_ERROR,
186 LEC_BIT0_ERROR,
187 LEC_CRC_ERROR,
188 LEC_UNUSED,
189 LEC_MASK = LEC_UNUSED,
190};
191
192/*
193 * c_can error types:
194 * Bus errors (BUS_OFF, ERROR_WARNING, ERROR_PASSIVE) are supported
195 */
196enum c_can_bus_error_types {
197 C_CAN_NO_ERROR = 0,
198 C_CAN_BUS_OFF,
199 C_CAN_ERROR_WARNING,
200 C_CAN_ERROR_PASSIVE,
201};
202
203static const struct can_bittiming_const c_can_bittiming_const = {
204 .name = KBUILD_MODNAME,
205 .tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */
206 .tseg1_max = 16,
207 .tseg2_min = 1, /* Time segment 2 = phase_seg2 */
208 .tseg2_max = 8,
209 .sjw_max = 4,
210 .brp_min = 1,
211 .brp_max = 1024, /* 6-bit BRP field + 4-bit BRPE field*/
212 .brp_inc = 1,
213};
214
215static inline void c_can_pm_runtime_enable(const struct c_can_priv *priv)
216{
217 if (priv->device)
218 pm_runtime_enable(priv->device);
219}
220
221static inline void c_can_pm_runtime_disable(const struct c_can_priv *priv)
222{
223 if (priv->device)
224 pm_runtime_disable(priv->device);
225}
226
227static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv)
228{
229 if (priv->device)
230 pm_runtime_get_sync(priv->device);
231}
232
233static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv)
234{
235 if (priv->device)
236 pm_runtime_put_sync(priv->device);
237}
238
239static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable)
240{
241 if (priv->raminit)
242 priv->raminit(priv, enable);
243}
244
245static void c_can_irq_control(struct c_can_priv *priv, bool enable)
246{
247 u32 ctrl = priv->read_reg(priv, C_CAN_CTRL_REG) & ~CONTROL_IRQMSK;
248
249 if (enable)
250 ctrl |= CONTROL_IRQMSK;
251
252 priv->write_reg(priv, C_CAN_CTRL_REG, ctrl);
253}
254
255static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj)
256{
257 struct c_can_priv *priv = netdev_priv(dev);
258 int cnt, reg = C_CAN_IFACE(COMREQ_REG, iface);
259
260 priv->write_reg32(priv, reg, (cmd << 16) | obj);
261
262 for (cnt = MIN_TIMEOUT_VALUE; cnt; cnt--) {
263 if (!(priv->read_reg(priv, reg) & IF_COMR_BUSY))
264 return;
265 udelay(1);
266 }
267 netdev_err(dev, "Updating object timed out\n");
268
269}
270
271static inline void c_can_object_get(struct net_device *dev, int iface,
272 u32 obj, u32 cmd)
273{
274 c_can_obj_update(dev, iface, cmd, obj);
275}
276
277static inline void c_can_object_put(struct net_device *dev, int iface,
278 u32 obj, u32 cmd)
279{
280 c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj);
281}
282
283/*
284 * Note: According to documentation clearing TXIE while MSGVAL is set
285 * is not allowed, but works nicely on C/DCAN. And that lowers the I/O
286 * load significantly.
287 */
288static void c_can_inval_tx_object(struct net_device *dev, int iface, int obj)
289{
290 struct c_can_priv *priv = netdev_priv(dev);
291
292 priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0);
293 c_can_object_put(dev, iface, obj, IF_COMM_INVAL);
294}
295
296static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj)
297{
298 struct c_can_priv *priv = netdev_priv(dev);
299
300 priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
301 priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0);
302 c_can_inval_tx_object(dev, iface, obj);
303}
304
305static void c_can_setup_tx_object(struct net_device *dev, int iface,
306 struct can_frame *frame, int idx)
307{
308 struct c_can_priv *priv = netdev_priv(dev);
309 u16 ctrl = IF_MCONT_TX | frame->can_dlc;
310 bool rtr = frame->can_id & CAN_RTR_FLAG;
311 u32 arb = IF_ARB_MSGVAL;
312 int i;
313
314 if (frame->can_id & CAN_EFF_FLAG) {
315 arb |= frame->can_id & CAN_EFF_MASK;
316 arb |= IF_ARB_MSGXTD;
317 } else {
318 arb |= (frame->can_id & CAN_SFF_MASK) << 18;
319 }
320
321 if (!rtr)
322 arb |= IF_ARB_TRANSMIT;
323
324 /*
325 * If we change the DIR bit, we need to invalidate the buffer
326 * first, i.e. clear the MSGVAL flag in the arbiter.
327 */
328 if (rtr != (bool)test_bit(idx, &priv->tx_dir)) {
329 u32 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
330
331 c_can_inval_msg_object(dev, iface, obj);
332 change_bit(idx, &priv->tx_dir);
333 }
334
335 priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), arb);
336
337 priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
338
339 if (priv->type == BOSCH_D_CAN) {
340 u32 data = 0, dreg = C_CAN_IFACE(DATA1_REG, iface);
341
342 for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) {
343 data = (u32)frame->data[i];
344 data |= (u32)frame->data[i + 1] << 8;
345 data |= (u32)frame->data[i + 2] << 16;
346 data |= (u32)frame->data[i + 3] << 24;
347 priv->write_reg32(priv, dreg, data);
348 }
349 } else {
350 for (i = 0; i < frame->can_dlc; i += 2) {
351 priv->write_reg(priv,
352 C_CAN_IFACE(DATA1_REG, iface) + i / 2,
353 frame->data[i] |
354 (frame->data[i + 1] << 8));
355 }
356 }
357}
358
359static inline void c_can_activate_all_lower_rx_msg_obj(struct net_device *dev,
360 int iface)
361{
362 int i;
363
364 for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_MSG_RX_LOW_LAST; i++)
365 c_can_object_get(dev, iface, i, IF_COMM_CLR_NEWDAT);
366}
367
368static int c_can_handle_lost_msg_obj(struct net_device *dev,
369 int iface, int objno, u32 ctrl)
370{
371 struct net_device_stats *stats = &dev->stats;
372 struct c_can_priv *priv = netdev_priv(dev);
373 struct can_frame *frame;
374 struct sk_buff *skb;
375
376 ctrl &= ~(IF_MCONT_MSGLST | IF_MCONT_INTPND | IF_MCONT_NEWDAT);
377 priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
378 c_can_object_put(dev, iface, objno, IF_COMM_CONTROL);
379
380 stats->rx_errors++;
381 stats->rx_over_errors++;
382
383 /* create an error msg */
384 skb = alloc_can_err_skb(dev, &frame);
385 if (unlikely(!skb))
386 return 0;
387
388 frame->can_id |= CAN_ERR_CRTL;
389 frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
390
391 netif_receive_skb(skb);
392 return 1;
393}
394
395static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl)
396{
397 struct net_device_stats *stats = &dev->stats;
398 struct c_can_priv *priv = netdev_priv(dev);
399 struct can_frame *frame;
400 struct sk_buff *skb;
401 u32 arb, data;
402
403 skb = alloc_can_skb(dev, &frame);
404 if (!skb) {
405 stats->rx_dropped++;
406 return -ENOMEM;
407 }
408
409 frame->can_dlc = get_can_dlc(ctrl & 0x0F);
410
411 arb = priv->read_reg32(priv, C_CAN_IFACE(ARB1_REG, iface));
412
413 if (arb & IF_ARB_MSGXTD)
414 frame->can_id = (arb & CAN_EFF_MASK) | CAN_EFF_FLAG;
415 else
416 frame->can_id = (arb >> 18) & CAN_SFF_MASK;
417
418 if (arb & IF_ARB_TRANSMIT) {
419 frame->can_id |= CAN_RTR_FLAG;
420 } else {
421 int i, dreg = C_CAN_IFACE(DATA1_REG, iface);
422
423 if (priv->type == BOSCH_D_CAN) {
424 for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) {
425 data = priv->read_reg32(priv, dreg);
426 frame->data[i] = data;
427 frame->data[i + 1] = data >> 8;
428 frame->data[i + 2] = data >> 16;
429 frame->data[i + 3] = data >> 24;
430 }
431 } else {
432 for (i = 0; i < frame->can_dlc; i += 2, dreg++) {
433 data = priv->read_reg(priv, dreg);
434 frame->data[i] = data;
435 frame->data[i + 1] = data >> 8;
436 }
437 }
438 }
439
440 stats->rx_packets++;
441 stats->rx_bytes += frame->can_dlc;
442
443 netif_receive_skb(skb);
444 return 0;
445}
446
447static void c_can_setup_receive_object(struct net_device *dev, int iface,
448 u32 obj, u32 mask, u32 id, u32 mcont)
449{
450 struct c_can_priv *priv = netdev_priv(dev);
451
452 mask |= BIT(29);
453 priv->write_reg32(priv, C_CAN_IFACE(MASK1_REG, iface), mask);
454
455 id |= IF_ARB_MSGVAL;
456 priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), id);
457
458 priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), mcont);
459 c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP);
460}
461
462static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
463 struct net_device *dev)
464{
465 struct can_frame *frame = (struct can_frame *)skb->data;
466 struct c_can_priv *priv = netdev_priv(dev);
467 u32 idx, obj;
468
469 if (can_dropped_invalid_skb(dev, skb))
470 return NETDEV_TX_OK;
471 /*
472 * This is not a FIFO. C/D_CAN sends out the buffers
473 * prioritized. The lowest buffer number wins.
474 */
475 idx = fls(atomic_read(&priv->tx_active));
476 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
477
478 /* If this is the last buffer, stop the xmit queue */
479 if (idx == C_CAN_MSG_OBJ_TX_NUM - 1)
480 netif_stop_queue(dev);
481 /*
482 * Store the message in the interface so we can call
483 * can_put_echo_skb(). We must do this before we enable
484 * transmit as we might race against do_tx().
485 */
486 c_can_setup_tx_object(dev, IF_TX, frame, idx);
487 priv->dlc[idx] = frame->can_dlc;
488 can_put_echo_skb(skb, dev, idx);
489
490 /* Update the active bits */
491 atomic_add((1 << idx), &priv->tx_active);
492 /* Start transmission */
493 c_can_object_put(dev, IF_TX, obj, IF_COMM_TX);
494
495 return NETDEV_TX_OK;
496}
497
498static int c_can_wait_for_ctrl_init(struct net_device *dev,
499 struct c_can_priv *priv, u32 init)
500{
501 int retry = 0;
502
503 while (init != (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_INIT)) {
504 udelay(10);
505 if (retry++ > 1000) {
506 netdev_err(dev, "CCTRL: set CONTROL_INIT failed\n");
507 return -EIO;
508 }
509 }
510 return 0;
511}
512
513static int c_can_set_bittiming(struct net_device *dev)
514{
515 unsigned int reg_btr, reg_brpe, ctrl_save;
516 u8 brp, brpe, sjw, tseg1, tseg2;
517 u32 ten_bit_brp;
518 struct c_can_priv *priv = netdev_priv(dev);
519 const struct can_bittiming *bt = &priv->can.bittiming;
520 int res;
521
522 /* c_can provides a 6-bit brp and 4-bit brpe fields */
523 ten_bit_brp = bt->brp - 1;
524 brp = ten_bit_brp & BTR_BRP_MASK;
525 brpe = ten_bit_brp >> 6;
526
527 sjw = bt->sjw - 1;
528 tseg1 = bt->prop_seg + bt->phase_seg1 - 1;
529 tseg2 = bt->phase_seg2 - 1;
530 reg_btr = brp | (sjw << BTR_SJW_SHIFT) | (tseg1 << BTR_TSEG1_SHIFT) |
531 (tseg2 << BTR_TSEG2_SHIFT);
532 reg_brpe = brpe & BRP_EXT_BRPE_MASK;
533
534 netdev_info(dev,
535 "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe);
536
537 ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG);
538 ctrl_save &= ~CONTROL_INIT;
539 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_CCE | CONTROL_INIT);
540 res = c_can_wait_for_ctrl_init(dev, priv, CONTROL_INIT);
541 if (res)
542 return res;
543
544 priv->write_reg(priv, C_CAN_BTR_REG, reg_btr);
545 priv->write_reg(priv, C_CAN_BRPEXT_REG, reg_brpe);
546 priv->write_reg(priv, C_CAN_CTRL_REG, ctrl_save);
547
548 return c_can_wait_for_ctrl_init(dev, priv, 0);
549}
550
551/*
552 * Configure C_CAN message objects for Tx and Rx purposes:
553 * C_CAN provides a total of 32 message objects that can be configured
554 * either for Tx or Rx purposes. Here the first 16 message objects are used as
555 * a reception FIFO. The end of reception FIFO is signified by the EoB bit
556 * being SET. The remaining 16 message objects are kept aside for Tx purposes.
557 * See user guide document for further details on configuring message
558 * objects.
559 */
560static void c_can_configure_msg_objects(struct net_device *dev)
561{
562 int i;
563
564 /* first invalidate all message objects */
565 for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_NO_OF_OBJECTS; i++)
566 c_can_inval_msg_object(dev, IF_RX, i);
567
568 /* setup receive message objects */
569 for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++)
570 c_can_setup_receive_object(dev, IF_RX, i, 0, 0, IF_MCONT_RCV);
571
572 c_can_setup_receive_object(dev, IF_RX, C_CAN_MSG_OBJ_RX_LAST, 0, 0,
573 IF_MCONT_RCV_EOB);
574}
575
576static int c_can_software_reset(struct net_device *dev)
577{
578 struct c_can_priv *priv = netdev_priv(dev);
579 int retry = 0;
580
581 if (priv->type != BOSCH_D_CAN)
582 return 0;
583
584 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_SWR | CONTROL_INIT);
585 while (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_SWR) {
586 msleep(20);
587 if (retry++ > 100) {
588 netdev_err(dev, "CCTRL: software reset failed\n");
589 return -EIO;
590 }
591 }
592
593 return 0;
594}
595
596/*
597 * Configure C_CAN chip:
598 * - enable/disable auto-retransmission
599 * - set operating mode
600 * - configure message objects
601 */
602static int c_can_chip_config(struct net_device *dev)
603{
604 struct c_can_priv *priv = netdev_priv(dev);
605 int err;
606
607 err = c_can_software_reset(dev);
608 if (err)
609 return err;
610
611 /* enable automatic retransmission */
612 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR);
613
614 if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
615 (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
616 /* loopback + silent mode : useful for hot self-test */
617 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
618 priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT);
619 } else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
620 /* loopback mode : useful for self-test function */
621 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
622 priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK);
623 } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) {
624 /* silent mode : bus-monitoring mode */
625 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
626 priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT);
627 }
628
629 /* configure message objects */
630 c_can_configure_msg_objects(dev);
631
632 /* set a `lec` value so that we can check for updates later */
633 priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
634
635 /* Clear all internal status */
636 atomic_set(&priv->tx_active, 0);
637 priv->rxmasked = 0;
638 priv->tx_dir = 0;
639
640 /* set bittiming params */
641 return c_can_set_bittiming(dev);
642}
643
644static int c_can_start(struct net_device *dev)
645{
646 struct c_can_priv *priv = netdev_priv(dev);
647 int err;
648 struct pinctrl *p;
649
650 /* basic c_can configuration */
651 err = c_can_chip_config(dev);
652 if (err)
653 return err;
654
655 /* Setup the command for new messages */
656 priv->comm_rcv_high = priv->type != BOSCH_D_CAN ?
657 IF_COMM_RCV_LOW : IF_COMM_RCV_HIGH;
658
659 priv->can.state = CAN_STATE_ERROR_ACTIVE;
660
661 /* Attempt to use "active" if available else use "default" */
662 p = pinctrl_get_select(priv->device, "active");
663 if (!IS_ERR(p))
664 pinctrl_put(p);
665 else
666 pinctrl_pm_select_default_state(priv->device);
667
668 return 0;
669}
670
671static void c_can_stop(struct net_device *dev)
672{
673 struct c_can_priv *priv = netdev_priv(dev);
674
675 c_can_irq_control(priv, false);
676
677 /* put ctrl to init on stop to end ongoing transmission */
678 priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_INIT);
679
680 /* deactivate pins */
681 pinctrl_pm_select_sleep_state(dev->dev.parent);
682 priv->can.state = CAN_STATE_STOPPED;
683}
684
685static int c_can_set_mode(struct net_device *dev, enum can_mode mode)
686{
687 struct c_can_priv *priv = netdev_priv(dev);
688 int err;
689
690 switch (mode) {
691 case CAN_MODE_START:
692 err = c_can_start(dev);
693 if (err)
694 return err;
695 netif_wake_queue(dev);
696 c_can_irq_control(priv, true);
697 break;
698 default:
699 return -EOPNOTSUPP;
700 }
701
702 return 0;
703}
704
705static int __c_can_get_berr_counter(const struct net_device *dev,
706 struct can_berr_counter *bec)
707{
708 unsigned int reg_err_counter;
709 struct c_can_priv *priv = netdev_priv(dev);
710
711 reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
712 bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >>
713 ERR_CNT_REC_SHIFT;
714 bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK;
715
716 return 0;
717}
718
719static int c_can_get_berr_counter(const struct net_device *dev,
720 struct can_berr_counter *bec)
721{
722 struct c_can_priv *priv = netdev_priv(dev);
723 int err;
724
725 c_can_pm_runtime_get_sync(priv);
726 err = __c_can_get_berr_counter(dev, bec);
727 c_can_pm_runtime_put_sync(priv);
728
729 return err;
730}
731
732static void c_can_do_tx(struct net_device *dev)
733{
734 struct c_can_priv *priv = netdev_priv(dev);
735 struct net_device_stats *stats = &dev->stats;
736 u32 idx, obj, pkts = 0, bytes = 0, pend, clr;
737
738 clr = pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
739
740 while ((idx = ffs(pend))) {
741 idx--;
742 pend &= ~(1 << idx);
743 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
744 c_can_inval_tx_object(dev, IF_RX, obj);
745 can_get_echo_skb(dev, idx);
746 bytes += priv->dlc[idx];
747 pkts++;
748 }
749
750 /* Clear the bits in the tx_active mask */
751 atomic_sub(clr, &priv->tx_active);
752
753 if (clr & (1 << (C_CAN_MSG_OBJ_TX_NUM - 1)))
754 netif_wake_queue(dev);
755
756 if (pkts) {
757 stats->tx_bytes += bytes;
758 stats->tx_packets += pkts;
759 can_led_event(dev, CAN_LED_EVENT_TX);
760 }
761}
762
763/*
764 * If we have a gap in the pending bits, that means we either
765 * raced with the hardware or failed to readout all upper
766 * objects in the last run due to quota limit.
767 */
768static u32 c_can_adjust_pending(u32 pend)
769{
770 u32 weight, lasts;
771
772 if (pend == RECEIVE_OBJECT_BITS)
773 return pend;
774
775 /*
776 * If the last set bit is larger than the number of pending
777 * bits we have a gap.
778 */
779 weight = hweight32(pend);
780 lasts = fls(pend);
781
782 /* If the bits are linear, nothing to do */
783 if (lasts == weight)
784 return pend;
785
786 /*
787 * Find the first set bit after the gap. We walk backwards
788 * from the last set bit.
789 */
790 for (lasts--; pend & (1 << (lasts - 1)); lasts--);
791
792 return pend & ~((1 << lasts) - 1);
793}
794
795static inline void c_can_rx_object_get(struct net_device *dev,
796 struct c_can_priv *priv, u32 obj)
797{
798 c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high);
799}
800
801static inline void c_can_rx_finalize(struct net_device *dev,
802 struct c_can_priv *priv, u32 obj)
803{
804 if (priv->type != BOSCH_D_CAN)
805 c_can_object_get(dev, IF_RX, obj, IF_COMM_CLR_NEWDAT);
806}
807
808static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
809 u32 pend, int quota)
810{
811 u32 pkts = 0, ctrl, obj;
812
813 while ((obj = ffs(pend)) && quota > 0) {
814 pend &= ~BIT(obj - 1);
815
816 c_can_rx_object_get(dev, priv, obj);
817 ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_RX));
818
819 if (ctrl & IF_MCONT_MSGLST) {
820 int n = c_can_handle_lost_msg_obj(dev, IF_RX, obj, ctrl);
821
822 pkts += n;
823 quota -= n;
824 continue;
825 }
826
827 /*
828 * This really should not happen, but this covers some
829 * odd HW behaviour. Do not remove that unless you
830 * want to brick your machine.
831 */
832 if (!(ctrl & IF_MCONT_NEWDAT))
833 continue;
834
835 /* read the data from the message object */
836 c_can_read_msg_object(dev, IF_RX, ctrl);
837
838 c_can_rx_finalize(dev, priv, obj);
839
840 pkts++;
841 quota--;
842 }
843
844 return pkts;
845}
846
847static inline u32 c_can_get_pending(struct c_can_priv *priv)
848{
849 u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
850
851 return pend;
852}
853
854/*
855 * theory of operation:
856 *
857 * c_can core saves a received CAN message into the first free message
858 * object it finds free (starting with the lowest). Bits NEWDAT and
859 * INTPND are set for this message object indicating that a new message
860 * has arrived. To work-around this issue, we keep two groups of message
861 * objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT.
862 *
863 * We clear the newdat bit right away.
864 *
865 * This can result in packet reordering when the readout is slow.
866 */
867static int c_can_do_rx_poll(struct net_device *dev, int quota)
868{
869 struct c_can_priv *priv = netdev_priv(dev);
870 u32 pkts = 0, pend = 0, toread, n;
871
872 /*
873 * It is faster to read only one 16bit register. This is only possible
874 * for a maximum number of 16 objects.
875 */
876 BUILD_BUG_ON_MSG(C_CAN_MSG_OBJ_RX_LAST > 16,
877 "Implementation does not support more message objects than 16");
878
879 while (quota > 0) {
880 if (!pend) {
881 pend = c_can_get_pending(priv);
882 if (!pend)
883 break;
884 /*
885 * If the pending field has a gap, handle the
886 * bits above the gap first.
887 */
888 toread = c_can_adjust_pending(pend);
889 } else {
890 toread = pend;
891 }
892 /* Remove the bits from pend */
893 pend &= ~toread;
894 /* Read the objects */
895 n = c_can_read_objects(dev, priv, toread, quota);
896 pkts += n;
897 quota -= n;
898 }
899
900 if (pkts)
901 can_led_event(dev, CAN_LED_EVENT_RX);
902
903 return pkts;
904}
905
906static int c_can_handle_state_change(struct net_device *dev,
907 enum c_can_bus_error_types error_type)
908{
909 unsigned int reg_err_counter;
910 unsigned int rx_err_passive;
911 struct c_can_priv *priv = netdev_priv(dev);
912 struct net_device_stats *stats = &dev->stats;
913 struct can_frame *cf;
914 struct sk_buff *skb;
915 struct can_berr_counter bec;
916
917 switch (error_type) {
918 case C_CAN_NO_ERROR:
919 priv->can.state = CAN_STATE_ERROR_ACTIVE;
920 break;
921 case C_CAN_ERROR_WARNING:
922 /* error warning state */
923 priv->can.can_stats.error_warning++;
924 priv->can.state = CAN_STATE_ERROR_WARNING;
925 break;
926 case C_CAN_ERROR_PASSIVE:
927 /* error passive state */
928 priv->can.can_stats.error_passive++;
929 priv->can.state = CAN_STATE_ERROR_PASSIVE;
930 break;
931 case C_CAN_BUS_OFF:
932 /* bus-off state */
933 priv->can.state = CAN_STATE_BUS_OFF;
934 priv->can.can_stats.bus_off++;
935 break;
936 default:
937 break;
938 }
939
940 /* propagate the error condition to the CAN stack */
941 skb = alloc_can_err_skb(dev, &cf);
942 if (unlikely(!skb))
943 return 0;
944
945 __c_can_get_berr_counter(dev, &bec);
946 reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
947 rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >>
948 ERR_CNT_RP_SHIFT;
949
950 switch (error_type) {
951 case C_CAN_NO_ERROR:
952 /* error warning state */
953 cf->can_id |= CAN_ERR_CRTL;
954 cf->data[1] = CAN_ERR_CRTL_ACTIVE;
955 cf->data[6] = bec.txerr;
956 cf->data[7] = bec.rxerr;
957 break;
958 case C_CAN_ERROR_WARNING:
959 /* error warning state */
960 cf->can_id |= CAN_ERR_CRTL;
961 cf->data[1] = (bec.txerr > bec.rxerr) ?
962 CAN_ERR_CRTL_TX_WARNING :
963 CAN_ERR_CRTL_RX_WARNING;
964 cf->data[6] = bec.txerr;
965 cf->data[7] = bec.rxerr;
966
967 break;
968 case C_CAN_ERROR_PASSIVE:
969 /* error passive state */
970 cf->can_id |= CAN_ERR_CRTL;
971 if (rx_err_passive)
972 cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
973 if (bec.txerr > 127)
974 cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
975
976 cf->data[6] = bec.txerr;
977 cf->data[7] = bec.rxerr;
978 break;
979 case C_CAN_BUS_OFF:
980 /* bus-off state */
981 cf->can_id |= CAN_ERR_BUSOFF;
982 can_bus_off(dev);
983 break;
984 default:
985 break;
986 }
987
988 stats->rx_packets++;
989 stats->rx_bytes += cf->can_dlc;
990 netif_receive_skb(skb);
991
992 return 1;
993}
994
995static int c_can_handle_bus_err(struct net_device *dev,
996 enum c_can_lec_type lec_type)
997{
998 struct c_can_priv *priv = netdev_priv(dev);
999 struct net_device_stats *stats = &dev->stats;
1000 struct can_frame *cf;
1001 struct sk_buff *skb;
1002
1003 /*
1004 * early exit if no lec update or no error.
1005 * no lec update means that no CAN bus event has been detected
1006 * since CPU wrote 0x7 value to status reg.
1007 */
1008 if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR)
1009 return 0;
1010
1011 if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING))
1012 return 0;
1013
1014 /* common for all type of bus errors */
1015 priv->can.can_stats.bus_error++;
1016 stats->rx_errors++;
1017
1018 /* propagate the error condition to the CAN stack */
1019 skb = alloc_can_err_skb(dev, &cf);
1020 if (unlikely(!skb))
1021 return 0;
1022
1023 /*
1024 * check for 'last error code' which tells us the
1025 * type of the last error to occur on the CAN bus
1026 */
1027 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
1028
1029 switch (lec_type) {
1030 case LEC_STUFF_ERROR:
1031 netdev_dbg(dev, "stuff error\n");
1032 cf->data[2] |= CAN_ERR_PROT_STUFF;
1033 break;
1034 case LEC_FORM_ERROR:
1035 netdev_dbg(dev, "form error\n");
1036 cf->data[2] |= CAN_ERR_PROT_FORM;
1037 break;
1038 case LEC_ACK_ERROR:
1039 netdev_dbg(dev, "ack error\n");
1040 cf->data[3] = CAN_ERR_PROT_LOC_ACK;
1041 break;
1042 case LEC_BIT1_ERROR:
1043 netdev_dbg(dev, "bit1 error\n");
1044 cf->data[2] |= CAN_ERR_PROT_BIT1;
1045 break;
1046 case LEC_BIT0_ERROR:
1047 netdev_dbg(dev, "bit0 error\n");
1048 cf->data[2] |= CAN_ERR_PROT_BIT0;
1049 break;
1050 case LEC_CRC_ERROR:
1051 netdev_dbg(dev, "CRC error\n");
1052 cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
1053 break;
1054 default:
1055 break;
1056 }
1057
1058 stats->rx_packets++;
1059 stats->rx_bytes += cf->can_dlc;
1060 netif_receive_skb(skb);
1061 return 1;
1062}
1063
1064static int c_can_poll(struct napi_struct *napi, int quota)
1065{
1066 struct net_device *dev = napi->dev;
1067 struct c_can_priv *priv = netdev_priv(dev);
1068 u16 curr, last = priv->last_status;
1069 int work_done = 0;
1070
1071 /* Only read the status register if a status interrupt was pending */
1072 if (atomic_xchg(&priv->sie_pending, 0)) {
1073 priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
1074 /* Ack status on C_CAN. D_CAN is self clearing */
1075 if (priv->type != BOSCH_D_CAN)
1076 priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
1077 } else {
1078 /* no change detected ... */
1079 curr = last;
1080 }
1081
1082 /* handle state changes */
1083 if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) {
1084 netdev_dbg(dev, "entered error warning state\n");
1085 work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING);
1086 }
1087
1088 if ((curr & STATUS_EPASS) && (!(last & STATUS_EPASS))) {
1089 netdev_dbg(dev, "entered error passive state\n");
1090 work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE);
1091 }
1092
1093 if ((curr & STATUS_BOFF) && (!(last & STATUS_BOFF))) {
1094 netdev_dbg(dev, "entered bus off state\n");
1095 work_done += c_can_handle_state_change(dev, C_CAN_BUS_OFF);
1096 goto end;
1097 }
1098
1099 /* handle bus recovery events */
1100 if ((!(curr & STATUS_BOFF)) && (last & STATUS_BOFF)) {
1101 netdev_dbg(dev, "left bus off state\n");
1102 work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE);
1103 }
1104
1105 if ((!(curr & STATUS_EPASS)) && (last & STATUS_EPASS)) {
1106 netdev_dbg(dev, "left error passive state\n");
1107 work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING);
1108 }
1109
1110 if ((!(curr & STATUS_EWARN)) && (last & STATUS_EWARN)) {
1111 netdev_dbg(dev, "left error warning state\n");
1112 work_done += c_can_handle_state_change(dev, C_CAN_NO_ERROR);
1113 }
1114
1115 /* handle lec errors on the bus */
1116 work_done += c_can_handle_bus_err(dev, curr & LEC_MASK);
1117
1118 /* Handle Tx/Rx events. We do this unconditionally */
1119 work_done += c_can_do_rx_poll(dev, (quota - work_done));
1120 c_can_do_tx(dev);
1121
1122end:
1123 if (work_done < quota) {
1124 napi_complete_done(napi, work_done);
1125 /* enable all IRQs if we are not in bus off state */
1126 if (priv->can.state != CAN_STATE_BUS_OFF)
1127 c_can_irq_control(priv, true);
1128 }
1129
1130 return work_done;
1131}
1132
1133static irqreturn_t c_can_isr(int irq, void *dev_id)
1134{
1135 struct net_device *dev = (struct net_device *)dev_id;
1136 struct c_can_priv *priv = netdev_priv(dev);
1137 int reg_int;
1138
1139 reg_int = priv->read_reg(priv, C_CAN_INT_REG);
1140 if (!reg_int)
1141 return IRQ_NONE;
1142
1143 /* save for later use */
1144 if (reg_int & INT_STS_PENDING)
1145 atomic_set(&priv->sie_pending, 1);
1146
1147 /* disable all interrupts and schedule the NAPI */
1148 c_can_irq_control(priv, false);
1149 napi_schedule(&priv->napi);
1150
1151 return IRQ_HANDLED;
1152}
1153
1154static int c_can_open(struct net_device *dev)
1155{
1156 int err;
1157 struct c_can_priv *priv = netdev_priv(dev);
1158
1159 c_can_pm_runtime_get_sync(priv);
1160 c_can_reset_ram(priv, true);
1161
1162 /* open the can device */
1163 err = open_candev(dev);
1164 if (err) {
1165 netdev_err(dev, "failed to open can device\n");
1166 goto exit_open_fail;
1167 }
1168
1169 /* register interrupt handler */
1170 err = request_irq(dev->irq, &c_can_isr, IRQF_SHARED, dev->name,
1171 dev);
1172 if (err < 0) {
1173 netdev_err(dev, "failed to request interrupt\n");
1174 goto exit_irq_fail;
1175 }
1176
1177 /* start the c_can controller */
1178 err = c_can_start(dev);
1179 if (err)
1180 goto exit_start_fail;
1181
1182 can_led_event(dev, CAN_LED_EVENT_OPEN);
1183
1184 napi_enable(&priv->napi);
1185 /* enable status change, error and module interrupts */
1186 c_can_irq_control(priv, true);
1187 netif_start_queue(dev);
1188
1189 return 0;
1190
1191exit_start_fail:
1192 free_irq(dev->irq, dev);
1193exit_irq_fail:
1194 close_candev(dev);
1195exit_open_fail:
1196 c_can_reset_ram(priv, false);
1197 c_can_pm_runtime_put_sync(priv);
1198 return err;
1199}
1200
1201static int c_can_close(struct net_device *dev)
1202{
1203 struct c_can_priv *priv = netdev_priv(dev);
1204
1205 netif_stop_queue(dev);
1206 napi_disable(&priv->napi);
1207 c_can_stop(dev);
1208 free_irq(dev->irq, dev);
1209 close_candev(dev);
1210
1211 c_can_reset_ram(priv, false);
1212 c_can_pm_runtime_put_sync(priv);
1213
1214 can_led_event(dev, CAN_LED_EVENT_STOP);
1215
1216 return 0;
1217}
1218
1219struct net_device *alloc_c_can_dev(void)
1220{
1221 struct net_device *dev;
1222 struct c_can_priv *priv;
1223
1224 dev = alloc_candev(sizeof(struct c_can_priv), C_CAN_MSG_OBJ_TX_NUM);
1225 if (!dev)
1226 return NULL;
1227
1228 priv = netdev_priv(dev);
1229 netif_napi_add(dev, &priv->napi, c_can_poll, C_CAN_NAPI_WEIGHT);
1230
1231 priv->dev = dev;
1232 priv->can.bittiming_const = &c_can_bittiming_const;
1233 priv->can.do_set_mode = c_can_set_mode;
1234 priv->can.do_get_berr_counter = c_can_get_berr_counter;
1235 priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
1236 CAN_CTRLMODE_LISTENONLY |
1237 CAN_CTRLMODE_BERR_REPORTING;
1238
1239 return dev;
1240}
1241EXPORT_SYMBOL_GPL(alloc_c_can_dev);
1242
1243#ifdef CONFIG_PM
1244int c_can_power_down(struct net_device *dev)
1245{
1246 u32 val;
1247 unsigned long time_out;
1248 struct c_can_priv *priv = netdev_priv(dev);
1249
1250 if (!(dev->flags & IFF_UP))
1251 return 0;
1252
1253 WARN_ON(priv->type != BOSCH_D_CAN);
1254
1255 /* set PDR value so the device goes to power down mode */
1256 val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);
1257 val |= CONTROL_EX_PDR;
1258 priv->write_reg(priv, C_CAN_CTRL_EX_REG, val);
1259
1260 /* Wait for the PDA bit to get set */
1261 time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
1262 while (!(priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
1263 time_after(time_out, jiffies))
1264 cpu_relax();
1265
1266 if (time_after(jiffies, time_out))
1267 return -ETIMEDOUT;
1268
1269 c_can_stop(dev);
1270
1271 c_can_reset_ram(priv, false);
1272 c_can_pm_runtime_put_sync(priv);
1273
1274 return 0;
1275}
1276EXPORT_SYMBOL_GPL(c_can_power_down);
1277
1278int c_can_power_up(struct net_device *dev)
1279{
1280 u32 val;
1281 unsigned long time_out;
1282 struct c_can_priv *priv = netdev_priv(dev);
1283 int ret;
1284
1285 if (!(dev->flags & IFF_UP))
1286 return 0;
1287
1288 WARN_ON(priv->type != BOSCH_D_CAN);
1289
1290 c_can_pm_runtime_get_sync(priv);
1291 c_can_reset_ram(priv, true);
1292
1293 /* Clear PDR and INIT bits */
1294 val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);
1295 val &= ~CONTROL_EX_PDR;
1296 priv->write_reg(priv, C_CAN_CTRL_EX_REG, val);
1297 val = priv->read_reg(priv, C_CAN_CTRL_REG);
1298 val &= ~CONTROL_INIT;
1299 priv->write_reg(priv, C_CAN_CTRL_REG, val);
1300
1301 /* Wait for the PDA bit to get clear */
1302 time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
1303 while ((priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
1304 time_after(time_out, jiffies))
1305 cpu_relax();
1306
1307 if (time_after(jiffies, time_out))
1308 return -ETIMEDOUT;
1309
1310 ret = c_can_start(dev);
1311 if (!ret)
1312 c_can_irq_control(priv, true);
1313
1314 return ret;
1315}
1316EXPORT_SYMBOL_GPL(c_can_power_up);
1317#endif
1318
1319void free_c_can_dev(struct net_device *dev)
1320{
1321 struct c_can_priv *priv = netdev_priv(dev);
1322
1323 netif_napi_del(&priv->napi);
1324 free_candev(dev);
1325}
1326EXPORT_SYMBOL_GPL(free_c_can_dev);
1327
1328static const struct net_device_ops c_can_netdev_ops = {
1329 .ndo_open = c_can_open,
1330 .ndo_stop = c_can_close,
1331 .ndo_start_xmit = c_can_start_xmit,
1332 .ndo_change_mtu = can_change_mtu,
1333};
1334
1335int register_c_can_dev(struct net_device *dev)
1336{
1337 struct c_can_priv *priv = netdev_priv(dev);
1338 int err;
1339
1340 /* Deactivate pins to prevent DRA7 DCAN IP from being
1341 * stuck in transition when module is disabled.
1342 * Pins are activated in c_can_start() and deactivated
1343 * in c_can_stop()
1344 */
1345 pinctrl_pm_select_sleep_state(dev->dev.parent);
1346
1347 c_can_pm_runtime_enable(priv);
1348
1349 dev->flags |= IFF_ECHO; /* we support local echo */
1350 dev->netdev_ops = &c_can_netdev_ops;
1351
1352 err = register_candev(dev);
1353 if (err)
1354 c_can_pm_runtime_disable(priv);
1355 else
1356 devm_can_led_init(dev);
1357
1358 return err;
1359}
1360EXPORT_SYMBOL_GPL(register_c_can_dev);
1361
1362void unregister_c_can_dev(struct net_device *dev)
1363{
1364 struct c_can_priv *priv = netdev_priv(dev);
1365
1366 unregister_candev(dev);
1367
1368 c_can_pm_runtime_disable(priv);
1369}
1370EXPORT_SYMBOL_GPL(unregister_c_can_dev);
1371
1372MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>");
1373MODULE_LICENSE("GPL v2");
1374MODULE_DESCRIPTION("CAN bus driver for Bosch C_CAN controller");