Loading...
1/**************************************************************************
2 *
3 * Copyright 2006 Tungsten Graphics, Inc., Bismarck, ND., USA.
4 * All Rights Reserved.
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a
7 * copy of this software and associated documentation files (the
8 * "Software"), to deal in the Software without restriction, including
9 * without limitation the rights to use, copy, modify, merge, publish,
10 * distribute, sub license, and/or sell copies of the Software, and to
11 * permit persons to whom the Software is furnished to do so, subject to
12 * the following conditions:
13 *
14 * The above copyright notice and this permission notice (including the
15 * next paragraph) shall be included in all copies or substantial portions
16 * of the Software.
17 *
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
21 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
22 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
23 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
24 * USE OR OTHER DEALINGS IN THE SOFTWARE.
25 *
26 *
27 **************************************************************************/
28
29/*
30 * Generic simple memory manager implementation. Intended to be used as a base
31 * class implementation for more advanced memory managers.
32 *
33 * Note that the algorithm used is quite simple and there might be substantial
34 * performance gains if a smarter free list is implemented. Currently it is just an
35 * unordered stack of free regions. This could easily be improved if an RB-tree
36 * is used instead. At least if we expect heavy fragmentation.
37 *
38 * Aligned allocations can also see improvement.
39 *
40 * Authors:
41 * Thomas Hellström <thomas-at-tungstengraphics-dot-com>
42 */
43
44#include <drm/drmP.h>
45#include <drm/drm_mm.h>
46#include <linux/slab.h>
47#include <linux/seq_file.h>
48#include <linux/export.h>
49
50/**
51 * DOC: Overview
52 *
53 * drm_mm provides a simple range allocator. The drivers are free to use the
54 * resource allocator from the linux core if it suits them, the upside of drm_mm
55 * is that it's in the DRM core. Which means that it's easier to extend for
56 * some of the crazier special purpose needs of gpus.
57 *
58 * The main data struct is &drm_mm, allocations are tracked in &drm_mm_node.
59 * Drivers are free to embed either of them into their own suitable
60 * datastructures. drm_mm itself will not do any allocations of its own, so if
61 * drivers choose not to embed nodes they need to still allocate them
62 * themselves.
63 *
64 * The range allocator also supports reservation of preallocated blocks. This is
65 * useful for taking over initial mode setting configurations from the firmware,
66 * where an object needs to be created which exactly matches the firmware's
67 * scanout target. As long as the range is still free it can be inserted anytime
68 * after the allocator is initialized, which helps with avoiding looped
69 * depencies in the driver load sequence.
70 *
71 * drm_mm maintains a stack of most recently freed holes, which of all
72 * simplistic datastructures seems to be a fairly decent approach to clustering
73 * allocations and avoiding too much fragmentation. This means free space
74 * searches are O(num_holes). Given that all the fancy features drm_mm supports
75 * something better would be fairly complex and since gfx thrashing is a fairly
76 * steep cliff not a real concern. Removing a node again is O(1).
77 *
78 * drm_mm supports a few features: Alignment and range restrictions can be
79 * supplied. Further more every &drm_mm_node has a color value (which is just an
80 * opaqua unsigned long) which in conjunction with a driver callback can be used
81 * to implement sophisticated placement restrictions. The i915 DRM driver uses
82 * this to implement guard pages between incompatible caching domains in the
83 * graphics TT.
84 *
85 * Two behaviors are supported for searching and allocating: bottom-up and top-down.
86 * The default is bottom-up. Top-down allocation can be used if the memory area
87 * has different restrictions, or just to reduce fragmentation.
88 *
89 * Finally iteration helpers to walk all nodes and all holes are provided as are
90 * some basic allocator dumpers for debugging.
91 */
92
93static struct drm_mm_node *drm_mm_search_free_generic(const struct drm_mm *mm,
94 u64 size,
95 unsigned alignment,
96 unsigned long color,
97 enum drm_mm_search_flags flags);
98static struct drm_mm_node *drm_mm_search_free_in_range_generic(const struct drm_mm *mm,
99 u64 size,
100 unsigned alignment,
101 unsigned long color,
102 u64 start,
103 u64 end,
104 enum drm_mm_search_flags flags);
105
106static void drm_mm_insert_helper(struct drm_mm_node *hole_node,
107 struct drm_mm_node *node,
108 u64 size, unsigned alignment,
109 unsigned long color,
110 enum drm_mm_allocator_flags flags)
111{
112 struct drm_mm *mm = hole_node->mm;
113 u64 hole_start = drm_mm_hole_node_start(hole_node);
114 u64 hole_end = drm_mm_hole_node_end(hole_node);
115 u64 adj_start = hole_start;
116 u64 adj_end = hole_end;
117
118 BUG_ON(node->allocated);
119
120 if (mm->color_adjust)
121 mm->color_adjust(hole_node, color, &adj_start, &adj_end);
122
123 if (flags & DRM_MM_CREATE_TOP)
124 adj_start = adj_end - size;
125
126 if (alignment) {
127 u64 tmp = adj_start;
128 unsigned rem;
129
130 rem = do_div(tmp, alignment);
131 if (rem) {
132 if (flags & DRM_MM_CREATE_TOP)
133 adj_start -= rem;
134 else
135 adj_start += alignment - rem;
136 }
137 }
138
139 BUG_ON(adj_start < hole_start);
140 BUG_ON(adj_end > hole_end);
141
142 if (adj_start == hole_start) {
143 hole_node->hole_follows = 0;
144 list_del(&hole_node->hole_stack);
145 }
146
147 node->start = adj_start;
148 node->size = size;
149 node->mm = mm;
150 node->color = color;
151 node->allocated = 1;
152
153 INIT_LIST_HEAD(&node->hole_stack);
154 list_add(&node->node_list, &hole_node->node_list);
155
156 BUG_ON(node->start + node->size > adj_end);
157
158 node->hole_follows = 0;
159 if (__drm_mm_hole_node_start(node) < hole_end) {
160 list_add(&node->hole_stack, &mm->hole_stack);
161 node->hole_follows = 1;
162 }
163}
164
165/**
166 * drm_mm_reserve_node - insert an pre-initialized node
167 * @mm: drm_mm allocator to insert @node into
168 * @node: drm_mm_node to insert
169 *
170 * This functions inserts an already set-up drm_mm_node into the allocator,
171 * meaning that start, size and color must be set by the caller. This is useful
172 * to initialize the allocator with preallocated objects which must be set-up
173 * before the range allocator can be set-up, e.g. when taking over a firmware
174 * framebuffer.
175 *
176 * Returns:
177 * 0 on success, -ENOSPC if there's no hole where @node is.
178 */
179int drm_mm_reserve_node(struct drm_mm *mm, struct drm_mm_node *node)
180{
181 struct drm_mm_node *hole;
182 u64 end = node->start + node->size;
183 u64 hole_start;
184 u64 hole_end;
185
186 BUG_ON(node == NULL);
187
188 /* Find the relevant hole to add our node to */
189 drm_mm_for_each_hole(hole, mm, hole_start, hole_end) {
190 if (hole_start > node->start || hole_end < end)
191 continue;
192
193 node->mm = mm;
194 node->allocated = 1;
195
196 INIT_LIST_HEAD(&node->hole_stack);
197 list_add(&node->node_list, &hole->node_list);
198
199 if (node->start == hole_start) {
200 hole->hole_follows = 0;
201 list_del_init(&hole->hole_stack);
202 }
203
204 node->hole_follows = 0;
205 if (end != hole_end) {
206 list_add(&node->hole_stack, &mm->hole_stack);
207 node->hole_follows = 1;
208 }
209
210 return 0;
211 }
212
213 return -ENOSPC;
214}
215EXPORT_SYMBOL(drm_mm_reserve_node);
216
217/**
218 * drm_mm_insert_node_generic - search for space and insert @node
219 * @mm: drm_mm to allocate from
220 * @node: preallocate node to insert
221 * @size: size of the allocation
222 * @alignment: alignment of the allocation
223 * @color: opaque tag value to use for this node
224 * @sflags: flags to fine-tune the allocation search
225 * @aflags: flags to fine-tune the allocation behavior
226 *
227 * The preallocated node must be cleared to 0.
228 *
229 * Returns:
230 * 0 on success, -ENOSPC if there's no suitable hole.
231 */
232int drm_mm_insert_node_generic(struct drm_mm *mm, struct drm_mm_node *node,
233 u64 size, unsigned alignment,
234 unsigned long color,
235 enum drm_mm_search_flags sflags,
236 enum drm_mm_allocator_flags aflags)
237{
238 struct drm_mm_node *hole_node;
239
240 hole_node = drm_mm_search_free_generic(mm, size, alignment,
241 color, sflags);
242 if (!hole_node)
243 return -ENOSPC;
244
245 drm_mm_insert_helper(hole_node, node, size, alignment, color, aflags);
246 return 0;
247}
248EXPORT_SYMBOL(drm_mm_insert_node_generic);
249
250static void drm_mm_insert_helper_range(struct drm_mm_node *hole_node,
251 struct drm_mm_node *node,
252 u64 size, unsigned alignment,
253 unsigned long color,
254 u64 start, u64 end,
255 enum drm_mm_allocator_flags flags)
256{
257 struct drm_mm *mm = hole_node->mm;
258 u64 hole_start = drm_mm_hole_node_start(hole_node);
259 u64 hole_end = drm_mm_hole_node_end(hole_node);
260 u64 adj_start = hole_start;
261 u64 adj_end = hole_end;
262
263 BUG_ON(!hole_node->hole_follows || node->allocated);
264
265 if (adj_start < start)
266 adj_start = start;
267 if (adj_end > end)
268 adj_end = end;
269
270 if (mm->color_adjust)
271 mm->color_adjust(hole_node, color, &adj_start, &adj_end);
272
273 if (flags & DRM_MM_CREATE_TOP)
274 adj_start = adj_end - size;
275
276 if (alignment) {
277 u64 tmp = adj_start;
278 unsigned rem;
279
280 rem = do_div(tmp, alignment);
281 if (rem) {
282 if (flags & DRM_MM_CREATE_TOP)
283 adj_start -= rem;
284 else
285 adj_start += alignment - rem;
286 }
287 }
288
289 if (adj_start == hole_start) {
290 hole_node->hole_follows = 0;
291 list_del(&hole_node->hole_stack);
292 }
293
294 node->start = adj_start;
295 node->size = size;
296 node->mm = mm;
297 node->color = color;
298 node->allocated = 1;
299
300 INIT_LIST_HEAD(&node->hole_stack);
301 list_add(&node->node_list, &hole_node->node_list);
302
303 BUG_ON(node->start < start);
304 BUG_ON(node->start < adj_start);
305 BUG_ON(node->start + node->size > adj_end);
306 BUG_ON(node->start + node->size > end);
307
308 node->hole_follows = 0;
309 if (__drm_mm_hole_node_start(node) < hole_end) {
310 list_add(&node->hole_stack, &mm->hole_stack);
311 node->hole_follows = 1;
312 }
313}
314
315/**
316 * drm_mm_insert_node_in_range_generic - ranged search for space and insert @node
317 * @mm: drm_mm to allocate from
318 * @node: preallocate node to insert
319 * @size: size of the allocation
320 * @alignment: alignment of the allocation
321 * @color: opaque tag value to use for this node
322 * @start: start of the allowed range for this node
323 * @end: end of the allowed range for this node
324 * @sflags: flags to fine-tune the allocation search
325 * @aflags: flags to fine-tune the allocation behavior
326 *
327 * The preallocated node must be cleared to 0.
328 *
329 * Returns:
330 * 0 on success, -ENOSPC if there's no suitable hole.
331 */
332int drm_mm_insert_node_in_range_generic(struct drm_mm *mm, struct drm_mm_node *node,
333 u64 size, unsigned alignment,
334 unsigned long color,
335 u64 start, u64 end,
336 enum drm_mm_search_flags sflags,
337 enum drm_mm_allocator_flags aflags)
338{
339 struct drm_mm_node *hole_node;
340
341 hole_node = drm_mm_search_free_in_range_generic(mm,
342 size, alignment, color,
343 start, end, sflags);
344 if (!hole_node)
345 return -ENOSPC;
346
347 drm_mm_insert_helper_range(hole_node, node,
348 size, alignment, color,
349 start, end, aflags);
350 return 0;
351}
352EXPORT_SYMBOL(drm_mm_insert_node_in_range_generic);
353
354/**
355 * drm_mm_remove_node - Remove a memory node from the allocator.
356 * @node: drm_mm_node to remove
357 *
358 * This just removes a node from its drm_mm allocator. The node does not need to
359 * be cleared again before it can be re-inserted into this or any other drm_mm
360 * allocator. It is a bug to call this function on a un-allocated node.
361 */
362void drm_mm_remove_node(struct drm_mm_node *node)
363{
364 struct drm_mm *mm = node->mm;
365 struct drm_mm_node *prev_node;
366
367 if (WARN_ON(!node->allocated))
368 return;
369
370 BUG_ON(node->scanned_block || node->scanned_prev_free
371 || node->scanned_next_free);
372
373 prev_node =
374 list_entry(node->node_list.prev, struct drm_mm_node, node_list);
375
376 if (node->hole_follows) {
377 BUG_ON(__drm_mm_hole_node_start(node) ==
378 __drm_mm_hole_node_end(node));
379 list_del(&node->hole_stack);
380 } else
381 BUG_ON(__drm_mm_hole_node_start(node) !=
382 __drm_mm_hole_node_end(node));
383
384
385 if (!prev_node->hole_follows) {
386 prev_node->hole_follows = 1;
387 list_add(&prev_node->hole_stack, &mm->hole_stack);
388 } else
389 list_move(&prev_node->hole_stack, &mm->hole_stack);
390
391 list_del(&node->node_list);
392 node->allocated = 0;
393}
394EXPORT_SYMBOL(drm_mm_remove_node);
395
396static int check_free_hole(u64 start, u64 end, u64 size, unsigned alignment)
397{
398 if (end - start < size)
399 return 0;
400
401 if (alignment) {
402 u64 tmp = start;
403 unsigned rem;
404
405 rem = do_div(tmp, alignment);
406 if (rem)
407 start += alignment - rem;
408 }
409
410 return end >= start + size;
411}
412
413static struct drm_mm_node *drm_mm_search_free_generic(const struct drm_mm *mm,
414 u64 size,
415 unsigned alignment,
416 unsigned long color,
417 enum drm_mm_search_flags flags)
418{
419 struct drm_mm_node *entry;
420 struct drm_mm_node *best;
421 u64 adj_start;
422 u64 adj_end;
423 u64 best_size;
424
425 BUG_ON(mm->scanned_blocks);
426
427 best = NULL;
428 best_size = ~0UL;
429
430 __drm_mm_for_each_hole(entry, mm, adj_start, adj_end,
431 flags & DRM_MM_SEARCH_BELOW) {
432 u64 hole_size = adj_end - adj_start;
433
434 if (mm->color_adjust) {
435 mm->color_adjust(entry, color, &adj_start, &adj_end);
436 if (adj_end <= adj_start)
437 continue;
438 }
439
440 if (!check_free_hole(adj_start, adj_end, size, alignment))
441 continue;
442
443 if (!(flags & DRM_MM_SEARCH_BEST))
444 return entry;
445
446 if (hole_size < best_size) {
447 best = entry;
448 best_size = hole_size;
449 }
450 }
451
452 return best;
453}
454
455static struct drm_mm_node *drm_mm_search_free_in_range_generic(const struct drm_mm *mm,
456 u64 size,
457 unsigned alignment,
458 unsigned long color,
459 u64 start,
460 u64 end,
461 enum drm_mm_search_flags flags)
462{
463 struct drm_mm_node *entry;
464 struct drm_mm_node *best;
465 u64 adj_start;
466 u64 adj_end;
467 u64 best_size;
468
469 BUG_ON(mm->scanned_blocks);
470
471 best = NULL;
472 best_size = ~0UL;
473
474 __drm_mm_for_each_hole(entry, mm, adj_start, adj_end,
475 flags & DRM_MM_SEARCH_BELOW) {
476 u64 hole_size = adj_end - adj_start;
477
478 if (adj_start < start)
479 adj_start = start;
480 if (adj_end > end)
481 adj_end = end;
482
483 if (mm->color_adjust) {
484 mm->color_adjust(entry, color, &adj_start, &adj_end);
485 if (adj_end <= adj_start)
486 continue;
487 }
488
489 if (!check_free_hole(adj_start, adj_end, size, alignment))
490 continue;
491
492 if (!(flags & DRM_MM_SEARCH_BEST))
493 return entry;
494
495 if (hole_size < best_size) {
496 best = entry;
497 best_size = hole_size;
498 }
499 }
500
501 return best;
502}
503
504/**
505 * drm_mm_replace_node - move an allocation from @old to @new
506 * @old: drm_mm_node to remove from the allocator
507 * @new: drm_mm_node which should inherit @old's allocation
508 *
509 * This is useful for when drivers embed the drm_mm_node structure and hence
510 * can't move allocations by reassigning pointers. It's a combination of remove
511 * and insert with the guarantee that the allocation start will match.
512 */
513void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new)
514{
515 list_replace(&old->node_list, &new->node_list);
516 list_replace(&old->hole_stack, &new->hole_stack);
517 new->hole_follows = old->hole_follows;
518 new->mm = old->mm;
519 new->start = old->start;
520 new->size = old->size;
521 new->color = old->color;
522
523 old->allocated = 0;
524 new->allocated = 1;
525}
526EXPORT_SYMBOL(drm_mm_replace_node);
527
528/**
529 * DOC: lru scan roaster
530 *
531 * Very often GPUs need to have continuous allocations for a given object. When
532 * evicting objects to make space for a new one it is therefore not most
533 * efficient when we simply start to select all objects from the tail of an LRU
534 * until there's a suitable hole: Especially for big objects or nodes that
535 * otherwise have special allocation constraints there's a good chance we evict
536 * lots of (smaller) objects unecessarily.
537 *
538 * The DRM range allocator supports this use-case through the scanning
539 * interfaces. First a scan operation needs to be initialized with
540 * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds
541 * objects to the roaster (probably by walking an LRU list, but this can be
542 * freely implemented) until a suitable hole is found or there's no further
543 * evitable object.
544 *
545 * The the driver must walk through all objects again in exactly the reverse
546 * order to restore the allocator state. Note that while the allocator is used
547 * in the scan mode no other operation is allowed.
548 *
549 * Finally the driver evicts all objects selected in the scan. Adding and
550 * removing an object is O(1), and since freeing a node is also O(1) the overall
551 * complexity is O(scanned_objects). So like the free stack which needs to be
552 * walked before a scan operation even begins this is linear in the number of
553 * objects. It doesn't seem to hurt badly.
554 */
555
556/**
557 * drm_mm_init_scan - initialize lru scanning
558 * @mm: drm_mm to scan
559 * @size: size of the allocation
560 * @alignment: alignment of the allocation
561 * @color: opaque tag value to use for the allocation
562 *
563 * This simply sets up the scanning routines with the parameters for the desired
564 * hole. Note that there's no need to specify allocation flags, since they only
565 * change the place a node is allocated from within a suitable hole.
566 *
567 * Warning:
568 * As long as the scan list is non-empty, no other operations than
569 * adding/removing nodes to/from the scan list are allowed.
570 */
571void drm_mm_init_scan(struct drm_mm *mm,
572 u64 size,
573 unsigned alignment,
574 unsigned long color)
575{
576 mm->scan_color = color;
577 mm->scan_alignment = alignment;
578 mm->scan_size = size;
579 mm->scanned_blocks = 0;
580 mm->scan_hit_start = 0;
581 mm->scan_hit_end = 0;
582 mm->scan_check_range = 0;
583 mm->prev_scanned_node = NULL;
584}
585EXPORT_SYMBOL(drm_mm_init_scan);
586
587/**
588 * drm_mm_init_scan - initialize range-restricted lru scanning
589 * @mm: drm_mm to scan
590 * @size: size of the allocation
591 * @alignment: alignment of the allocation
592 * @color: opaque tag value to use for the allocation
593 * @start: start of the allowed range for the allocation
594 * @end: end of the allowed range for the allocation
595 *
596 * This simply sets up the scanning routines with the parameters for the desired
597 * hole. Note that there's no need to specify allocation flags, since they only
598 * change the place a node is allocated from within a suitable hole.
599 *
600 * Warning:
601 * As long as the scan list is non-empty, no other operations than
602 * adding/removing nodes to/from the scan list are allowed.
603 */
604void drm_mm_init_scan_with_range(struct drm_mm *mm,
605 u64 size,
606 unsigned alignment,
607 unsigned long color,
608 u64 start,
609 u64 end)
610{
611 mm->scan_color = color;
612 mm->scan_alignment = alignment;
613 mm->scan_size = size;
614 mm->scanned_blocks = 0;
615 mm->scan_hit_start = 0;
616 mm->scan_hit_end = 0;
617 mm->scan_start = start;
618 mm->scan_end = end;
619 mm->scan_check_range = 1;
620 mm->prev_scanned_node = NULL;
621}
622EXPORT_SYMBOL(drm_mm_init_scan_with_range);
623
624/**
625 * drm_mm_scan_add_block - add a node to the scan list
626 * @node: drm_mm_node to add
627 *
628 * Add a node to the scan list that might be freed to make space for the desired
629 * hole.
630 *
631 * Returns:
632 * True if a hole has been found, false otherwise.
633 */
634bool drm_mm_scan_add_block(struct drm_mm_node *node)
635{
636 struct drm_mm *mm = node->mm;
637 struct drm_mm_node *prev_node;
638 u64 hole_start, hole_end;
639 u64 adj_start, adj_end;
640
641 mm->scanned_blocks++;
642
643 BUG_ON(node->scanned_block);
644 node->scanned_block = 1;
645
646 prev_node = list_entry(node->node_list.prev, struct drm_mm_node,
647 node_list);
648
649 node->scanned_preceeds_hole = prev_node->hole_follows;
650 prev_node->hole_follows = 1;
651 list_del(&node->node_list);
652 node->node_list.prev = &prev_node->node_list;
653 node->node_list.next = &mm->prev_scanned_node->node_list;
654 mm->prev_scanned_node = node;
655
656 adj_start = hole_start = drm_mm_hole_node_start(prev_node);
657 adj_end = hole_end = drm_mm_hole_node_end(prev_node);
658
659 if (mm->scan_check_range) {
660 if (adj_start < mm->scan_start)
661 adj_start = mm->scan_start;
662 if (adj_end > mm->scan_end)
663 adj_end = mm->scan_end;
664 }
665
666 if (mm->color_adjust)
667 mm->color_adjust(prev_node, mm->scan_color,
668 &adj_start, &adj_end);
669
670 if (check_free_hole(adj_start, adj_end,
671 mm->scan_size, mm->scan_alignment)) {
672 mm->scan_hit_start = hole_start;
673 mm->scan_hit_end = hole_end;
674 return true;
675 }
676
677 return false;
678}
679EXPORT_SYMBOL(drm_mm_scan_add_block);
680
681/**
682 * drm_mm_scan_remove_block - remove a node from the scan list
683 * @node: drm_mm_node to remove
684 *
685 * Nodes _must_ be removed in the exact same order from the scan list as they
686 * have been added, otherwise the internal state of the memory manager will be
687 * corrupted.
688 *
689 * When the scan list is empty, the selected memory nodes can be freed. An
690 * immediately following drm_mm_search_free with !DRM_MM_SEARCH_BEST will then
691 * return the just freed block (because its at the top of the free_stack list).
692 *
693 * Returns:
694 * True if this block should be evicted, false otherwise. Will always
695 * return false when no hole has been found.
696 */
697bool drm_mm_scan_remove_block(struct drm_mm_node *node)
698{
699 struct drm_mm *mm = node->mm;
700 struct drm_mm_node *prev_node;
701
702 mm->scanned_blocks--;
703
704 BUG_ON(!node->scanned_block);
705 node->scanned_block = 0;
706
707 prev_node = list_entry(node->node_list.prev, struct drm_mm_node,
708 node_list);
709
710 prev_node->hole_follows = node->scanned_preceeds_hole;
711 list_add(&node->node_list, &prev_node->node_list);
712
713 return (drm_mm_hole_node_end(node) > mm->scan_hit_start &&
714 node->start < mm->scan_hit_end);
715}
716EXPORT_SYMBOL(drm_mm_scan_remove_block);
717
718/**
719 * drm_mm_clean - checks whether an allocator is clean
720 * @mm: drm_mm allocator to check
721 *
722 * Returns:
723 * True if the allocator is completely free, false if there's still a node
724 * allocated in it.
725 */
726bool drm_mm_clean(struct drm_mm * mm)
727{
728 struct list_head *head = &mm->head_node.node_list;
729
730 return (head->next->next == head);
731}
732EXPORT_SYMBOL(drm_mm_clean);
733
734/**
735 * drm_mm_init - initialize a drm-mm allocator
736 * @mm: the drm_mm structure to initialize
737 * @start: start of the range managed by @mm
738 * @size: end of the range managed by @mm
739 *
740 * Note that @mm must be cleared to 0 before calling this function.
741 */
742void drm_mm_init(struct drm_mm * mm, u64 start, u64 size)
743{
744 INIT_LIST_HEAD(&mm->hole_stack);
745 mm->scanned_blocks = 0;
746
747 /* Clever trick to avoid a special case in the free hole tracking. */
748 INIT_LIST_HEAD(&mm->head_node.node_list);
749 INIT_LIST_HEAD(&mm->head_node.hole_stack);
750 mm->head_node.hole_follows = 1;
751 mm->head_node.scanned_block = 0;
752 mm->head_node.scanned_prev_free = 0;
753 mm->head_node.scanned_next_free = 0;
754 mm->head_node.mm = mm;
755 mm->head_node.start = start + size;
756 mm->head_node.size = start - mm->head_node.start;
757 list_add_tail(&mm->head_node.hole_stack, &mm->hole_stack);
758
759 mm->color_adjust = NULL;
760}
761EXPORT_SYMBOL(drm_mm_init);
762
763/**
764 * drm_mm_takedown - clean up a drm_mm allocator
765 * @mm: drm_mm allocator to clean up
766 *
767 * Note that it is a bug to call this function on an allocator which is not
768 * clean.
769 */
770void drm_mm_takedown(struct drm_mm * mm)
771{
772 WARN(!list_empty(&mm->head_node.node_list),
773 "Memory manager not clean during takedown.\n");
774}
775EXPORT_SYMBOL(drm_mm_takedown);
776
777static u64 drm_mm_debug_hole(struct drm_mm_node *entry,
778 const char *prefix)
779{
780 u64 hole_start, hole_end, hole_size;
781
782 if (entry->hole_follows) {
783 hole_start = drm_mm_hole_node_start(entry);
784 hole_end = drm_mm_hole_node_end(entry);
785 hole_size = hole_end - hole_start;
786 pr_debug("%s %#llx-%#llx: %llu: free\n", prefix, hole_start,
787 hole_end, hole_size);
788 return hole_size;
789 }
790
791 return 0;
792}
793
794/**
795 * drm_mm_debug_table - dump allocator state to dmesg
796 * @mm: drm_mm allocator to dump
797 * @prefix: prefix to use for dumping to dmesg
798 */
799void drm_mm_debug_table(struct drm_mm *mm, const char *prefix)
800{
801 struct drm_mm_node *entry;
802 u64 total_used = 0, total_free = 0, total = 0;
803
804 total_free += drm_mm_debug_hole(&mm->head_node, prefix);
805
806 drm_mm_for_each_node(entry, mm) {
807 pr_debug("%s %#llx-%#llx: %llu: used\n", prefix, entry->start,
808 entry->start + entry->size, entry->size);
809 total_used += entry->size;
810 total_free += drm_mm_debug_hole(entry, prefix);
811 }
812 total = total_free + total_used;
813
814 pr_debug("%s total: %llu, used %llu free %llu\n", prefix, total,
815 total_used, total_free);
816}
817EXPORT_SYMBOL(drm_mm_debug_table);
818
819#if defined(CONFIG_DEBUG_FS)
820static u64 drm_mm_dump_hole(struct seq_file *m, struct drm_mm_node *entry)
821{
822 u64 hole_start, hole_end, hole_size;
823
824 if (entry->hole_follows) {
825 hole_start = drm_mm_hole_node_start(entry);
826 hole_end = drm_mm_hole_node_end(entry);
827 hole_size = hole_end - hole_start;
828 seq_printf(m, "%#018llx-%#018llx: %llu: free\n", hole_start,
829 hole_end, hole_size);
830 return hole_size;
831 }
832
833 return 0;
834}
835
836/**
837 * drm_mm_dump_table - dump allocator state to a seq_file
838 * @m: seq_file to dump to
839 * @mm: drm_mm allocator to dump
840 */
841int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm)
842{
843 struct drm_mm_node *entry;
844 u64 total_used = 0, total_free = 0, total = 0;
845
846 total_free += drm_mm_dump_hole(m, &mm->head_node);
847
848 drm_mm_for_each_node(entry, mm) {
849 seq_printf(m, "%#018llx-%#018llx: %llu: used\n", entry->start,
850 entry->start + entry->size, entry->size);
851 total_used += entry->size;
852 total_free += drm_mm_dump_hole(m, entry);
853 }
854 total = total_free + total_used;
855
856 seq_printf(m, "total: %llu, used %llu free %llu\n", total,
857 total_used, total_free);
858 return 0;
859}
860EXPORT_SYMBOL(drm_mm_dump_table);
861#endif
1/**************************************************************************
2 *
3 * Copyright 2006 Tungsten Graphics, Inc., Bismarck, ND., USA.
4 * Copyright 2016 Intel Corporation
5 * All Rights Reserved.
6 *
7 * Permission is hereby granted, free of charge, to any person obtaining a
8 * copy of this software and associated documentation files (the
9 * "Software"), to deal in the Software without restriction, including
10 * without limitation the rights to use, copy, modify, merge, publish,
11 * distribute, sub license, and/or sell copies of the Software, and to
12 * permit persons to whom the Software is furnished to do so, subject to
13 * the following conditions:
14 *
15 * The above copyright notice and this permission notice (including the
16 * next paragraph) shall be included in all copies or substantial portions
17 * of the Software.
18 *
19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
21 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
22 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
23 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
24 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
25 * USE OR OTHER DEALINGS IN THE SOFTWARE.
26 *
27 *
28 **************************************************************************/
29
30/*
31 * Generic simple memory manager implementation. Intended to be used as a base
32 * class implementation for more advanced memory managers.
33 *
34 * Note that the algorithm used is quite simple and there might be substantial
35 * performance gains if a smarter free list is implemented. Currently it is
36 * just an unordered stack of free regions. This could easily be improved if
37 * an RB-tree is used instead. At least if we expect heavy fragmentation.
38 *
39 * Aligned allocations can also see improvement.
40 *
41 * Authors:
42 * Thomas Hellström <thomas-at-tungstengraphics-dot-com>
43 */
44
45#include <linux/export.h>
46#include <linux/interval_tree_generic.h>
47#include <linux/seq_file.h>
48#include <linux/slab.h>
49#include <linux/stacktrace.h>
50
51#include <drm/drm_mm.h>
52
53/**
54 * DOC: Overview
55 *
56 * drm_mm provides a simple range allocator. The drivers are free to use the
57 * resource allocator from the linux core if it suits them, the upside of drm_mm
58 * is that it's in the DRM core. Which means that it's easier to extend for
59 * some of the crazier special purpose needs of gpus.
60 *
61 * The main data struct is &drm_mm, allocations are tracked in &drm_mm_node.
62 * Drivers are free to embed either of them into their own suitable
63 * datastructures. drm_mm itself will not do any memory allocations of its own,
64 * so if drivers choose not to embed nodes they need to still allocate them
65 * themselves.
66 *
67 * The range allocator also supports reservation of preallocated blocks. This is
68 * useful for taking over initial mode setting configurations from the firmware,
69 * where an object needs to be created which exactly matches the firmware's
70 * scanout target. As long as the range is still free it can be inserted anytime
71 * after the allocator is initialized, which helps with avoiding looped
72 * dependencies in the driver load sequence.
73 *
74 * drm_mm maintains a stack of most recently freed holes, which of all
75 * simplistic datastructures seems to be a fairly decent approach to clustering
76 * allocations and avoiding too much fragmentation. This means free space
77 * searches are O(num_holes). Given that all the fancy features drm_mm supports
78 * something better would be fairly complex and since gfx thrashing is a fairly
79 * steep cliff not a real concern. Removing a node again is O(1).
80 *
81 * drm_mm supports a few features: Alignment and range restrictions can be
82 * supplied. Furthermore every &drm_mm_node has a color value (which is just an
83 * opaque unsigned long) which in conjunction with a driver callback can be used
84 * to implement sophisticated placement restrictions. The i915 DRM driver uses
85 * this to implement guard pages between incompatible caching domains in the
86 * graphics TT.
87 *
88 * Two behaviors are supported for searching and allocating: bottom-up and
89 * top-down. The default is bottom-up. Top-down allocation can be used if the
90 * memory area has different restrictions, or just to reduce fragmentation.
91 *
92 * Finally iteration helpers to walk all nodes and all holes are provided as are
93 * some basic allocator dumpers for debugging.
94 *
95 * Note that this range allocator is not thread-safe, drivers need to protect
96 * modifications with their own locking. The idea behind this is that for a full
97 * memory manager additional data needs to be protected anyway, hence internal
98 * locking would be fully redundant.
99 */
100
101#ifdef CONFIG_DRM_DEBUG_MM
102#include <linux/stackdepot.h>
103
104#define STACKDEPTH 32
105#define BUFSZ 4096
106
107static noinline void save_stack(struct drm_mm_node *node)
108{
109 unsigned long entries[STACKDEPTH];
110 unsigned int n;
111
112 n = stack_trace_save(entries, ARRAY_SIZE(entries), 1);
113
114 /* May be called under spinlock, so avoid sleeping */
115 node->stack = stack_depot_save(entries, n, GFP_NOWAIT);
116}
117
118static void show_leaks(struct drm_mm *mm)
119{
120 struct drm_mm_node *node;
121 unsigned long *entries;
122 unsigned int nr_entries;
123 char *buf;
124
125 buf = kmalloc(BUFSZ, GFP_KERNEL);
126 if (!buf)
127 return;
128
129 list_for_each_entry(node, drm_mm_nodes(mm), node_list) {
130 if (!node->stack) {
131 DRM_ERROR("node [%08llx + %08llx]: unknown owner\n",
132 node->start, node->size);
133 continue;
134 }
135
136 nr_entries = stack_depot_fetch(node->stack, &entries);
137 stack_trace_snprint(buf, BUFSZ, entries, nr_entries, 0);
138 DRM_ERROR("node [%08llx + %08llx]: inserted at\n%s",
139 node->start, node->size, buf);
140 }
141
142 kfree(buf);
143}
144
145#undef STACKDEPTH
146#undef BUFSZ
147#else
148static void save_stack(struct drm_mm_node *node) { }
149static void show_leaks(struct drm_mm *mm) { }
150#endif
151
152#define START(node) ((node)->start)
153#define LAST(node) ((node)->start + (node)->size - 1)
154
155INTERVAL_TREE_DEFINE(struct drm_mm_node, rb,
156 u64, __subtree_last,
157 START, LAST, static inline, drm_mm_interval_tree)
158
159struct drm_mm_node *
160__drm_mm_interval_first(const struct drm_mm *mm, u64 start, u64 last)
161{
162 return drm_mm_interval_tree_iter_first((struct rb_root_cached *)&mm->interval_tree,
163 start, last) ?: (struct drm_mm_node *)&mm->head_node;
164}
165EXPORT_SYMBOL(__drm_mm_interval_first);
166
167static void drm_mm_interval_tree_add_node(struct drm_mm_node *hole_node,
168 struct drm_mm_node *node)
169{
170 struct drm_mm *mm = hole_node->mm;
171 struct rb_node **link, *rb;
172 struct drm_mm_node *parent;
173 bool leftmost;
174
175 node->__subtree_last = LAST(node);
176
177 if (hole_node->allocated) {
178 rb = &hole_node->rb;
179 while (rb) {
180 parent = rb_entry(rb, struct drm_mm_node, rb);
181 if (parent->__subtree_last >= node->__subtree_last)
182 break;
183
184 parent->__subtree_last = node->__subtree_last;
185 rb = rb_parent(rb);
186 }
187
188 rb = &hole_node->rb;
189 link = &hole_node->rb.rb_right;
190 leftmost = false;
191 } else {
192 rb = NULL;
193 link = &mm->interval_tree.rb_root.rb_node;
194 leftmost = true;
195 }
196
197 while (*link) {
198 rb = *link;
199 parent = rb_entry(rb, struct drm_mm_node, rb);
200 if (parent->__subtree_last < node->__subtree_last)
201 parent->__subtree_last = node->__subtree_last;
202 if (node->start < parent->start) {
203 link = &parent->rb.rb_left;
204 } else {
205 link = &parent->rb.rb_right;
206 leftmost = false;
207 }
208 }
209
210 rb_link_node(&node->rb, rb, link);
211 rb_insert_augmented_cached(&node->rb, &mm->interval_tree, leftmost,
212 &drm_mm_interval_tree_augment);
213}
214
215#define RB_INSERT(root, member, expr) do { \
216 struct rb_node **link = &root.rb_node, *rb = NULL; \
217 u64 x = expr(node); \
218 while (*link) { \
219 rb = *link; \
220 if (x < expr(rb_entry(rb, struct drm_mm_node, member))) \
221 link = &rb->rb_left; \
222 else \
223 link = &rb->rb_right; \
224 } \
225 rb_link_node(&node->member, rb, link); \
226 rb_insert_color(&node->member, &root); \
227} while (0)
228
229#define HOLE_SIZE(NODE) ((NODE)->hole_size)
230#define HOLE_ADDR(NODE) (__drm_mm_hole_node_start(NODE))
231
232static u64 rb_to_hole_size(struct rb_node *rb)
233{
234 return rb_entry(rb, struct drm_mm_node, rb_hole_size)->hole_size;
235}
236
237static void insert_hole_size(struct rb_root_cached *root,
238 struct drm_mm_node *node)
239{
240 struct rb_node **link = &root->rb_root.rb_node, *rb = NULL;
241 u64 x = node->hole_size;
242 bool first = true;
243
244 while (*link) {
245 rb = *link;
246 if (x > rb_to_hole_size(rb)) {
247 link = &rb->rb_left;
248 } else {
249 link = &rb->rb_right;
250 first = false;
251 }
252 }
253
254 rb_link_node(&node->rb_hole_size, rb, link);
255 rb_insert_color_cached(&node->rb_hole_size, root, first);
256}
257
258static void add_hole(struct drm_mm_node *node)
259{
260 struct drm_mm *mm = node->mm;
261
262 node->hole_size =
263 __drm_mm_hole_node_end(node) - __drm_mm_hole_node_start(node);
264 DRM_MM_BUG_ON(!drm_mm_hole_follows(node));
265
266 insert_hole_size(&mm->holes_size, node);
267 RB_INSERT(mm->holes_addr, rb_hole_addr, HOLE_ADDR);
268
269 list_add(&node->hole_stack, &mm->hole_stack);
270}
271
272static void rm_hole(struct drm_mm_node *node)
273{
274 DRM_MM_BUG_ON(!drm_mm_hole_follows(node));
275
276 list_del(&node->hole_stack);
277 rb_erase_cached(&node->rb_hole_size, &node->mm->holes_size);
278 rb_erase(&node->rb_hole_addr, &node->mm->holes_addr);
279 node->hole_size = 0;
280
281 DRM_MM_BUG_ON(drm_mm_hole_follows(node));
282}
283
284static inline struct drm_mm_node *rb_hole_size_to_node(struct rb_node *rb)
285{
286 return rb_entry_safe(rb, struct drm_mm_node, rb_hole_size);
287}
288
289static inline struct drm_mm_node *rb_hole_addr_to_node(struct rb_node *rb)
290{
291 return rb_entry_safe(rb, struct drm_mm_node, rb_hole_addr);
292}
293
294static inline u64 rb_hole_size(struct rb_node *rb)
295{
296 return rb_entry(rb, struct drm_mm_node, rb_hole_size)->hole_size;
297}
298
299static struct drm_mm_node *best_hole(struct drm_mm *mm, u64 size)
300{
301 struct rb_node *rb = mm->holes_size.rb_root.rb_node;
302 struct drm_mm_node *best = NULL;
303
304 do {
305 struct drm_mm_node *node =
306 rb_entry(rb, struct drm_mm_node, rb_hole_size);
307
308 if (size <= node->hole_size) {
309 best = node;
310 rb = rb->rb_right;
311 } else {
312 rb = rb->rb_left;
313 }
314 } while (rb);
315
316 return best;
317}
318
319static struct drm_mm_node *find_hole(struct drm_mm *mm, u64 addr)
320{
321 struct rb_node *rb = mm->holes_addr.rb_node;
322 struct drm_mm_node *node = NULL;
323
324 while (rb) {
325 u64 hole_start;
326
327 node = rb_hole_addr_to_node(rb);
328 hole_start = __drm_mm_hole_node_start(node);
329
330 if (addr < hole_start)
331 rb = node->rb_hole_addr.rb_left;
332 else if (addr > hole_start + node->hole_size)
333 rb = node->rb_hole_addr.rb_right;
334 else
335 break;
336 }
337
338 return node;
339}
340
341static struct drm_mm_node *
342first_hole(struct drm_mm *mm,
343 u64 start, u64 end, u64 size,
344 enum drm_mm_insert_mode mode)
345{
346 switch (mode) {
347 default:
348 case DRM_MM_INSERT_BEST:
349 return best_hole(mm, size);
350
351 case DRM_MM_INSERT_LOW:
352 return find_hole(mm, start);
353
354 case DRM_MM_INSERT_HIGH:
355 return find_hole(mm, end);
356
357 case DRM_MM_INSERT_EVICT:
358 return list_first_entry_or_null(&mm->hole_stack,
359 struct drm_mm_node,
360 hole_stack);
361 }
362}
363
364static struct drm_mm_node *
365next_hole(struct drm_mm *mm,
366 struct drm_mm_node *node,
367 enum drm_mm_insert_mode mode)
368{
369 switch (mode) {
370 default:
371 case DRM_MM_INSERT_BEST:
372 return rb_hole_size_to_node(rb_prev(&node->rb_hole_size));
373
374 case DRM_MM_INSERT_LOW:
375 return rb_hole_addr_to_node(rb_next(&node->rb_hole_addr));
376
377 case DRM_MM_INSERT_HIGH:
378 return rb_hole_addr_to_node(rb_prev(&node->rb_hole_addr));
379
380 case DRM_MM_INSERT_EVICT:
381 node = list_next_entry(node, hole_stack);
382 return &node->hole_stack == &mm->hole_stack ? NULL : node;
383 }
384}
385
386/**
387 * drm_mm_reserve_node - insert an pre-initialized node
388 * @mm: drm_mm allocator to insert @node into
389 * @node: drm_mm_node to insert
390 *
391 * This functions inserts an already set-up &drm_mm_node into the allocator,
392 * meaning that start, size and color must be set by the caller. All other
393 * fields must be cleared to 0. This is useful to initialize the allocator with
394 * preallocated objects which must be set-up before the range allocator can be
395 * set-up, e.g. when taking over a firmware framebuffer.
396 *
397 * Returns:
398 * 0 on success, -ENOSPC if there's no hole where @node is.
399 */
400int drm_mm_reserve_node(struct drm_mm *mm, struct drm_mm_node *node)
401{
402 u64 end = node->start + node->size;
403 struct drm_mm_node *hole;
404 u64 hole_start, hole_end;
405 u64 adj_start, adj_end;
406
407 end = node->start + node->size;
408 if (unlikely(end <= node->start))
409 return -ENOSPC;
410
411 /* Find the relevant hole to add our node to */
412 hole = find_hole(mm, node->start);
413 if (!hole)
414 return -ENOSPC;
415
416 adj_start = hole_start = __drm_mm_hole_node_start(hole);
417 adj_end = hole_end = hole_start + hole->hole_size;
418
419 if (mm->color_adjust)
420 mm->color_adjust(hole, node->color, &adj_start, &adj_end);
421
422 if (adj_start > node->start || adj_end < end)
423 return -ENOSPC;
424
425 node->mm = mm;
426
427 list_add(&node->node_list, &hole->node_list);
428 drm_mm_interval_tree_add_node(hole, node);
429 node->allocated = true;
430 node->hole_size = 0;
431
432 rm_hole(hole);
433 if (node->start > hole_start)
434 add_hole(hole);
435 if (end < hole_end)
436 add_hole(node);
437
438 save_stack(node);
439 return 0;
440}
441EXPORT_SYMBOL(drm_mm_reserve_node);
442
443static u64 rb_to_hole_size_or_zero(struct rb_node *rb)
444{
445 return rb ? rb_to_hole_size(rb) : 0;
446}
447
448/**
449 * drm_mm_insert_node_in_range - ranged search for space and insert @node
450 * @mm: drm_mm to allocate from
451 * @node: preallocate node to insert
452 * @size: size of the allocation
453 * @alignment: alignment of the allocation
454 * @color: opaque tag value to use for this node
455 * @range_start: start of the allowed range for this node
456 * @range_end: end of the allowed range for this node
457 * @mode: fine-tune the allocation search and placement
458 *
459 * The preallocated @node must be cleared to 0.
460 *
461 * Returns:
462 * 0 on success, -ENOSPC if there's no suitable hole.
463 */
464int drm_mm_insert_node_in_range(struct drm_mm * const mm,
465 struct drm_mm_node * const node,
466 u64 size, u64 alignment,
467 unsigned long color,
468 u64 range_start, u64 range_end,
469 enum drm_mm_insert_mode mode)
470{
471 struct drm_mm_node *hole;
472 u64 remainder_mask;
473 bool once;
474
475 DRM_MM_BUG_ON(range_start > range_end);
476
477 if (unlikely(size == 0 || range_end - range_start < size))
478 return -ENOSPC;
479
480 if (rb_to_hole_size_or_zero(rb_first_cached(&mm->holes_size)) < size)
481 return -ENOSPC;
482
483 if (alignment <= 1)
484 alignment = 0;
485
486 once = mode & DRM_MM_INSERT_ONCE;
487 mode &= ~DRM_MM_INSERT_ONCE;
488
489 remainder_mask = is_power_of_2(alignment) ? alignment - 1 : 0;
490 for (hole = first_hole(mm, range_start, range_end, size, mode);
491 hole;
492 hole = once ? NULL : next_hole(mm, hole, mode)) {
493 u64 hole_start = __drm_mm_hole_node_start(hole);
494 u64 hole_end = hole_start + hole->hole_size;
495 u64 adj_start, adj_end;
496 u64 col_start, col_end;
497
498 if (mode == DRM_MM_INSERT_LOW && hole_start >= range_end)
499 break;
500
501 if (mode == DRM_MM_INSERT_HIGH && hole_end <= range_start)
502 break;
503
504 col_start = hole_start;
505 col_end = hole_end;
506 if (mm->color_adjust)
507 mm->color_adjust(hole, color, &col_start, &col_end);
508
509 adj_start = max(col_start, range_start);
510 adj_end = min(col_end, range_end);
511
512 if (adj_end <= adj_start || adj_end - adj_start < size)
513 continue;
514
515 if (mode == DRM_MM_INSERT_HIGH)
516 adj_start = adj_end - size;
517
518 if (alignment) {
519 u64 rem;
520
521 if (likely(remainder_mask))
522 rem = adj_start & remainder_mask;
523 else
524 div64_u64_rem(adj_start, alignment, &rem);
525 if (rem) {
526 adj_start -= rem;
527 if (mode != DRM_MM_INSERT_HIGH)
528 adj_start += alignment;
529
530 if (adj_start < max(col_start, range_start) ||
531 min(col_end, range_end) - adj_start < size)
532 continue;
533
534 if (adj_end <= adj_start ||
535 adj_end - adj_start < size)
536 continue;
537 }
538 }
539
540 node->mm = mm;
541 node->size = size;
542 node->start = adj_start;
543 node->color = color;
544 node->hole_size = 0;
545
546 list_add(&node->node_list, &hole->node_list);
547 drm_mm_interval_tree_add_node(hole, node);
548 node->allocated = true;
549
550 rm_hole(hole);
551 if (adj_start > hole_start)
552 add_hole(hole);
553 if (adj_start + size < hole_end)
554 add_hole(node);
555
556 save_stack(node);
557 return 0;
558 }
559
560 return -ENOSPC;
561}
562EXPORT_SYMBOL(drm_mm_insert_node_in_range);
563
564/**
565 * drm_mm_remove_node - Remove a memory node from the allocator.
566 * @node: drm_mm_node to remove
567 *
568 * This just removes a node from its drm_mm allocator. The node does not need to
569 * be cleared again before it can be re-inserted into this or any other drm_mm
570 * allocator. It is a bug to call this function on a unallocated node.
571 */
572void drm_mm_remove_node(struct drm_mm_node *node)
573{
574 struct drm_mm *mm = node->mm;
575 struct drm_mm_node *prev_node;
576
577 DRM_MM_BUG_ON(!node->allocated);
578 DRM_MM_BUG_ON(node->scanned_block);
579
580 prev_node = list_prev_entry(node, node_list);
581
582 if (drm_mm_hole_follows(node))
583 rm_hole(node);
584
585 drm_mm_interval_tree_remove(node, &mm->interval_tree);
586 list_del(&node->node_list);
587 node->allocated = false;
588
589 if (drm_mm_hole_follows(prev_node))
590 rm_hole(prev_node);
591 add_hole(prev_node);
592}
593EXPORT_SYMBOL(drm_mm_remove_node);
594
595/**
596 * drm_mm_replace_node - move an allocation from @old to @new
597 * @old: drm_mm_node to remove from the allocator
598 * @new: drm_mm_node which should inherit @old's allocation
599 *
600 * This is useful for when drivers embed the drm_mm_node structure and hence
601 * can't move allocations by reassigning pointers. It's a combination of remove
602 * and insert with the guarantee that the allocation start will match.
603 */
604void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new)
605{
606 struct drm_mm *mm = old->mm;
607
608 DRM_MM_BUG_ON(!old->allocated);
609
610 *new = *old;
611
612 list_replace(&old->node_list, &new->node_list);
613 rb_replace_node_cached(&old->rb, &new->rb, &mm->interval_tree);
614
615 if (drm_mm_hole_follows(old)) {
616 list_replace(&old->hole_stack, &new->hole_stack);
617 rb_replace_node_cached(&old->rb_hole_size,
618 &new->rb_hole_size,
619 &mm->holes_size);
620 rb_replace_node(&old->rb_hole_addr,
621 &new->rb_hole_addr,
622 &mm->holes_addr);
623 }
624
625 old->allocated = false;
626 new->allocated = true;
627}
628EXPORT_SYMBOL(drm_mm_replace_node);
629
630/**
631 * DOC: lru scan roster
632 *
633 * Very often GPUs need to have continuous allocations for a given object. When
634 * evicting objects to make space for a new one it is therefore not most
635 * efficient when we simply start to select all objects from the tail of an LRU
636 * until there's a suitable hole: Especially for big objects or nodes that
637 * otherwise have special allocation constraints there's a good chance we evict
638 * lots of (smaller) objects unnecessarily.
639 *
640 * The DRM range allocator supports this use-case through the scanning
641 * interfaces. First a scan operation needs to be initialized with
642 * drm_mm_scan_init() or drm_mm_scan_init_with_range(). The driver adds
643 * objects to the roster, probably by walking an LRU list, but this can be
644 * freely implemented. Eviction candiates are added using
645 * drm_mm_scan_add_block() until a suitable hole is found or there are no
646 * further evictable objects. Eviction roster metadata is tracked in &struct
647 * drm_mm_scan.
648 *
649 * The driver must walk through all objects again in exactly the reverse
650 * order to restore the allocator state. Note that while the allocator is used
651 * in the scan mode no other operation is allowed.
652 *
653 * Finally the driver evicts all objects selected (drm_mm_scan_remove_block()
654 * reported true) in the scan, and any overlapping nodes after color adjustment
655 * (drm_mm_scan_color_evict()). Adding and removing an object is O(1), and
656 * since freeing a node is also O(1) the overall complexity is
657 * O(scanned_objects). So like the free stack which needs to be walked before a
658 * scan operation even begins this is linear in the number of objects. It
659 * doesn't seem to hurt too badly.
660 */
661
662/**
663 * drm_mm_scan_init_with_range - initialize range-restricted lru scanning
664 * @scan: scan state
665 * @mm: drm_mm to scan
666 * @size: size of the allocation
667 * @alignment: alignment of the allocation
668 * @color: opaque tag value to use for the allocation
669 * @start: start of the allowed range for the allocation
670 * @end: end of the allowed range for the allocation
671 * @mode: fine-tune the allocation search and placement
672 *
673 * This simply sets up the scanning routines with the parameters for the desired
674 * hole.
675 *
676 * Warning:
677 * As long as the scan list is non-empty, no other operations than
678 * adding/removing nodes to/from the scan list are allowed.
679 */
680void drm_mm_scan_init_with_range(struct drm_mm_scan *scan,
681 struct drm_mm *mm,
682 u64 size,
683 u64 alignment,
684 unsigned long color,
685 u64 start,
686 u64 end,
687 enum drm_mm_insert_mode mode)
688{
689 DRM_MM_BUG_ON(start >= end);
690 DRM_MM_BUG_ON(!size || size > end - start);
691 DRM_MM_BUG_ON(mm->scan_active);
692
693 scan->mm = mm;
694
695 if (alignment <= 1)
696 alignment = 0;
697
698 scan->color = color;
699 scan->alignment = alignment;
700 scan->remainder_mask = is_power_of_2(alignment) ? alignment - 1 : 0;
701 scan->size = size;
702 scan->mode = mode;
703
704 DRM_MM_BUG_ON(end <= start);
705 scan->range_start = start;
706 scan->range_end = end;
707
708 scan->hit_start = U64_MAX;
709 scan->hit_end = 0;
710}
711EXPORT_SYMBOL(drm_mm_scan_init_with_range);
712
713/**
714 * drm_mm_scan_add_block - add a node to the scan list
715 * @scan: the active drm_mm scanner
716 * @node: drm_mm_node to add
717 *
718 * Add a node to the scan list that might be freed to make space for the desired
719 * hole.
720 *
721 * Returns:
722 * True if a hole has been found, false otherwise.
723 */
724bool drm_mm_scan_add_block(struct drm_mm_scan *scan,
725 struct drm_mm_node *node)
726{
727 struct drm_mm *mm = scan->mm;
728 struct drm_mm_node *hole;
729 u64 hole_start, hole_end;
730 u64 col_start, col_end;
731 u64 adj_start, adj_end;
732
733 DRM_MM_BUG_ON(node->mm != mm);
734 DRM_MM_BUG_ON(!node->allocated);
735 DRM_MM_BUG_ON(node->scanned_block);
736 node->scanned_block = true;
737 mm->scan_active++;
738
739 /* Remove this block from the node_list so that we enlarge the hole
740 * (distance between the end of our previous node and the start of
741 * or next), without poisoning the link so that we can restore it
742 * later in drm_mm_scan_remove_block().
743 */
744 hole = list_prev_entry(node, node_list);
745 DRM_MM_BUG_ON(list_next_entry(hole, node_list) != node);
746 __list_del_entry(&node->node_list);
747
748 hole_start = __drm_mm_hole_node_start(hole);
749 hole_end = __drm_mm_hole_node_end(hole);
750
751 col_start = hole_start;
752 col_end = hole_end;
753 if (mm->color_adjust)
754 mm->color_adjust(hole, scan->color, &col_start, &col_end);
755
756 adj_start = max(col_start, scan->range_start);
757 adj_end = min(col_end, scan->range_end);
758 if (adj_end <= adj_start || adj_end - adj_start < scan->size)
759 return false;
760
761 if (scan->mode == DRM_MM_INSERT_HIGH)
762 adj_start = adj_end - scan->size;
763
764 if (scan->alignment) {
765 u64 rem;
766
767 if (likely(scan->remainder_mask))
768 rem = adj_start & scan->remainder_mask;
769 else
770 div64_u64_rem(adj_start, scan->alignment, &rem);
771 if (rem) {
772 adj_start -= rem;
773 if (scan->mode != DRM_MM_INSERT_HIGH)
774 adj_start += scan->alignment;
775 if (adj_start < max(col_start, scan->range_start) ||
776 min(col_end, scan->range_end) - adj_start < scan->size)
777 return false;
778
779 if (adj_end <= adj_start ||
780 adj_end - adj_start < scan->size)
781 return false;
782 }
783 }
784
785 scan->hit_start = adj_start;
786 scan->hit_end = adj_start + scan->size;
787
788 DRM_MM_BUG_ON(scan->hit_start >= scan->hit_end);
789 DRM_MM_BUG_ON(scan->hit_start < hole_start);
790 DRM_MM_BUG_ON(scan->hit_end > hole_end);
791
792 return true;
793}
794EXPORT_SYMBOL(drm_mm_scan_add_block);
795
796/**
797 * drm_mm_scan_remove_block - remove a node from the scan list
798 * @scan: the active drm_mm scanner
799 * @node: drm_mm_node to remove
800 *
801 * Nodes **must** be removed in exactly the reverse order from the scan list as
802 * they have been added (e.g. using list_add() as they are added and then
803 * list_for_each() over that eviction list to remove), otherwise the internal
804 * state of the memory manager will be corrupted.
805 *
806 * When the scan list is empty, the selected memory nodes can be freed. An
807 * immediately following drm_mm_insert_node_in_range_generic() or one of the
808 * simpler versions of that function with !DRM_MM_SEARCH_BEST will then return
809 * the just freed block (because it's at the top of the free_stack list).
810 *
811 * Returns:
812 * True if this block should be evicted, false otherwise. Will always
813 * return false when no hole has been found.
814 */
815bool drm_mm_scan_remove_block(struct drm_mm_scan *scan,
816 struct drm_mm_node *node)
817{
818 struct drm_mm_node *prev_node;
819
820 DRM_MM_BUG_ON(node->mm != scan->mm);
821 DRM_MM_BUG_ON(!node->scanned_block);
822 node->scanned_block = false;
823
824 DRM_MM_BUG_ON(!node->mm->scan_active);
825 node->mm->scan_active--;
826
827 /* During drm_mm_scan_add_block() we decoupled this node leaving
828 * its pointers intact. Now that the caller is walking back along
829 * the eviction list we can restore this block into its rightful
830 * place on the full node_list. To confirm that the caller is walking
831 * backwards correctly we check that prev_node->next == node->next,
832 * i.e. both believe the same node should be on the other side of the
833 * hole.
834 */
835 prev_node = list_prev_entry(node, node_list);
836 DRM_MM_BUG_ON(list_next_entry(prev_node, node_list) !=
837 list_next_entry(node, node_list));
838 list_add(&node->node_list, &prev_node->node_list);
839
840 return (node->start + node->size > scan->hit_start &&
841 node->start < scan->hit_end);
842}
843EXPORT_SYMBOL(drm_mm_scan_remove_block);
844
845/**
846 * drm_mm_scan_color_evict - evict overlapping nodes on either side of hole
847 * @scan: drm_mm scan with target hole
848 *
849 * After completing an eviction scan and removing the selected nodes, we may
850 * need to remove a few more nodes from either side of the target hole if
851 * mm.color_adjust is being used.
852 *
853 * Returns:
854 * A node to evict, or NULL if there are no overlapping nodes.
855 */
856struct drm_mm_node *drm_mm_scan_color_evict(struct drm_mm_scan *scan)
857{
858 struct drm_mm *mm = scan->mm;
859 struct drm_mm_node *hole;
860 u64 hole_start, hole_end;
861
862 DRM_MM_BUG_ON(list_empty(&mm->hole_stack));
863
864 if (!mm->color_adjust)
865 return NULL;
866
867 /*
868 * The hole found during scanning should ideally be the first element
869 * in the hole_stack list, but due to side-effects in the driver it
870 * may not be.
871 */
872 list_for_each_entry(hole, &mm->hole_stack, hole_stack) {
873 hole_start = __drm_mm_hole_node_start(hole);
874 hole_end = hole_start + hole->hole_size;
875
876 if (hole_start <= scan->hit_start &&
877 hole_end >= scan->hit_end)
878 break;
879 }
880
881 /* We should only be called after we found the hole previously */
882 DRM_MM_BUG_ON(&hole->hole_stack == &mm->hole_stack);
883 if (unlikely(&hole->hole_stack == &mm->hole_stack))
884 return NULL;
885
886 DRM_MM_BUG_ON(hole_start > scan->hit_start);
887 DRM_MM_BUG_ON(hole_end < scan->hit_end);
888
889 mm->color_adjust(hole, scan->color, &hole_start, &hole_end);
890 if (hole_start > scan->hit_start)
891 return hole;
892 if (hole_end < scan->hit_end)
893 return list_next_entry(hole, node_list);
894
895 return NULL;
896}
897EXPORT_SYMBOL(drm_mm_scan_color_evict);
898
899/**
900 * drm_mm_init - initialize a drm-mm allocator
901 * @mm: the drm_mm structure to initialize
902 * @start: start of the range managed by @mm
903 * @size: end of the range managed by @mm
904 *
905 * Note that @mm must be cleared to 0 before calling this function.
906 */
907void drm_mm_init(struct drm_mm *mm, u64 start, u64 size)
908{
909 DRM_MM_BUG_ON(start + size <= start);
910
911 mm->color_adjust = NULL;
912
913 INIT_LIST_HEAD(&mm->hole_stack);
914 mm->interval_tree = RB_ROOT_CACHED;
915 mm->holes_size = RB_ROOT_CACHED;
916 mm->holes_addr = RB_ROOT;
917
918 /* Clever trick to avoid a special case in the free hole tracking. */
919 INIT_LIST_HEAD(&mm->head_node.node_list);
920 mm->head_node.allocated = false;
921 mm->head_node.mm = mm;
922 mm->head_node.start = start + size;
923 mm->head_node.size = -size;
924 add_hole(&mm->head_node);
925
926 mm->scan_active = 0;
927}
928EXPORT_SYMBOL(drm_mm_init);
929
930/**
931 * drm_mm_takedown - clean up a drm_mm allocator
932 * @mm: drm_mm allocator to clean up
933 *
934 * Note that it is a bug to call this function on an allocator which is not
935 * clean.
936 */
937void drm_mm_takedown(struct drm_mm *mm)
938{
939 if (WARN(!drm_mm_clean(mm),
940 "Memory manager not clean during takedown.\n"))
941 show_leaks(mm);
942}
943EXPORT_SYMBOL(drm_mm_takedown);
944
945static u64 drm_mm_dump_hole(struct drm_printer *p, const struct drm_mm_node *entry)
946{
947 u64 start, size;
948
949 size = entry->hole_size;
950 if (size) {
951 start = drm_mm_hole_node_start(entry);
952 drm_printf(p, "%#018llx-%#018llx: %llu: free\n",
953 start, start + size, size);
954 }
955
956 return size;
957}
958/**
959 * drm_mm_print - print allocator state
960 * @mm: drm_mm allocator to print
961 * @p: DRM printer to use
962 */
963void drm_mm_print(const struct drm_mm *mm, struct drm_printer *p)
964{
965 const struct drm_mm_node *entry;
966 u64 total_used = 0, total_free = 0, total = 0;
967
968 total_free += drm_mm_dump_hole(p, &mm->head_node);
969
970 drm_mm_for_each_node(entry, mm) {
971 drm_printf(p, "%#018llx-%#018llx: %llu: used\n", entry->start,
972 entry->start + entry->size, entry->size);
973 total_used += entry->size;
974 total_free += drm_mm_dump_hole(p, entry);
975 }
976 total = total_free + total_used;
977
978 drm_printf(p, "total: %llu, used %llu free %llu\n", total,
979 total_used, total_free);
980}
981EXPORT_SYMBOL(drm_mm_print);