Loading...
1/*
2 * Native support for the I/O-Warrior USB devices
3 *
4 * Copyright (c) 2003-2005 Code Mercenaries GmbH
5 * written by Christian Lucht <lucht@codemercs.com>
6 *
7 * based on
8
9 * usb-skeleton.c by Greg Kroah-Hartman <greg@kroah.com>
10 * brlvger.c by Stephane Dalton <sdalton@videotron.ca>
11 * and St�hane Doyon <s.doyon@videotron.ca>
12 *
13 * Released under the GPLv2.
14 */
15
16#include <linux/module.h>
17#include <linux/usb.h>
18#include <linux/slab.h>
19#include <linux/sched.h>
20#include <linux/mutex.h>
21#include <linux/poll.h>
22#include <linux/usb/iowarrior.h>
23
24/* Version Information */
25#define DRIVER_VERSION "v0.4.0"
26#define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>"
27#define DRIVER_DESC "USB IO-Warrior driver (Linux 2.6.x)"
28
29#define USB_VENDOR_ID_CODEMERCS 1984
30/* low speed iowarrior */
31#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
32#define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501
33#define USB_DEVICE_ID_CODEMERCS_IOWPV1 0x1511
34#define USB_DEVICE_ID_CODEMERCS_IOWPV2 0x1512
35/* full speed iowarrior */
36#define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503
37
38/* Get a minor range for your devices from the usb maintainer */
39#ifdef CONFIG_USB_DYNAMIC_MINORS
40#define IOWARRIOR_MINOR_BASE 0
41#else
42#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not official yet
43#endif
44
45/* interrupt input queue size */
46#define MAX_INTERRUPT_BUFFER 16
47/*
48 maximum number of urbs that are submitted for writes at the same time,
49 this applies to the IOWarrior56 only!
50 IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls.
51*/
52#define MAX_WRITES_IN_FLIGHT 4
53
54MODULE_AUTHOR(DRIVER_AUTHOR);
55MODULE_DESCRIPTION(DRIVER_DESC);
56MODULE_LICENSE("GPL");
57
58/* Module parameters */
59static DEFINE_MUTEX(iowarrior_mutex);
60
61static struct usb_driver iowarrior_driver;
62static DEFINE_MUTEX(iowarrior_open_disc_lock);
63
64/*--------------*/
65/* data */
66/*--------------*/
67
68/* Structure to hold all of our device specific stuff */
69struct iowarrior {
70 struct mutex mutex; /* locks this structure */
71 struct usb_device *udev; /* save off the usb device pointer */
72 struct usb_interface *interface; /* the interface for this device */
73 unsigned char minor; /* the starting minor number for this device */
74 struct usb_endpoint_descriptor *int_out_endpoint; /* endpoint for reading (needed for IOW56 only) */
75 struct usb_endpoint_descriptor *int_in_endpoint; /* endpoint for reading */
76 struct urb *int_in_urb; /* the urb for reading data */
77 unsigned char *int_in_buffer; /* buffer for data to be read */
78 unsigned char serial_number; /* to detect lost packages */
79 unsigned char *read_queue; /* size is MAX_INTERRUPT_BUFFER * packet size */
80 wait_queue_head_t read_wait;
81 wait_queue_head_t write_wait; /* wait-queue for writing to the device */
82 atomic_t write_busy; /* number of write-urbs submitted */
83 atomic_t read_idx;
84 atomic_t intr_idx;
85 spinlock_t intr_idx_lock; /* protects intr_idx */
86 atomic_t overflow_flag; /* signals an index 'rollover' */
87 int present; /* this is 1 as long as the device is connected */
88 int opened; /* this is 1 if the device is currently open */
89 char chip_serial[9]; /* the serial number string of the chip connected */
90 int report_size; /* number of bytes in a report */
91 u16 product_id;
92};
93
94/*--------------*/
95/* globals */
96/*--------------*/
97
98/*
99 * USB spec identifies 5 second timeouts.
100 */
101#define GET_TIMEOUT 5
102#define USB_REQ_GET_REPORT 0x01
103//#if 0
104static int usb_get_report(struct usb_device *dev,
105 struct usb_host_interface *inter, unsigned char type,
106 unsigned char id, void *buf, int size)
107{
108 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
109 USB_REQ_GET_REPORT,
110 USB_DIR_IN | USB_TYPE_CLASS |
111 USB_RECIP_INTERFACE, (type << 8) + id,
112 inter->desc.bInterfaceNumber, buf, size,
113 GET_TIMEOUT*HZ);
114}
115//#endif
116
117#define USB_REQ_SET_REPORT 0x09
118
119static int usb_set_report(struct usb_interface *intf, unsigned char type,
120 unsigned char id, void *buf, int size)
121{
122 return usb_control_msg(interface_to_usbdev(intf),
123 usb_sndctrlpipe(interface_to_usbdev(intf), 0),
124 USB_REQ_SET_REPORT,
125 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
126 (type << 8) + id,
127 intf->cur_altsetting->desc.bInterfaceNumber, buf,
128 size, HZ);
129}
130
131/*---------------------*/
132/* driver registration */
133/*---------------------*/
134/* table of devices that work with this driver */
135static const struct usb_device_id iowarrior_ids[] = {
136 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)},
137 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)},
138 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
139 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)},
140 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
141 {} /* Terminating entry */
142};
143MODULE_DEVICE_TABLE(usb, iowarrior_ids);
144
145/*
146 * USB callback handler for reading data
147 */
148static void iowarrior_callback(struct urb *urb)
149{
150 struct iowarrior *dev = urb->context;
151 int intr_idx;
152 int read_idx;
153 int aux_idx;
154 int offset;
155 int status = urb->status;
156 int retval;
157
158 switch (status) {
159 case 0:
160 /* success */
161 break;
162 case -ECONNRESET:
163 case -ENOENT:
164 case -ESHUTDOWN:
165 return;
166 default:
167 goto exit;
168 }
169
170 spin_lock(&dev->intr_idx_lock);
171 intr_idx = atomic_read(&dev->intr_idx);
172 /* aux_idx become previous intr_idx */
173 aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1);
174 read_idx = atomic_read(&dev->read_idx);
175
176 /* queue is not empty and it's interface 0 */
177 if ((intr_idx != read_idx)
178 && (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) {
179 /* + 1 for serial number */
180 offset = aux_idx * (dev->report_size + 1);
181 if (!memcmp
182 (dev->read_queue + offset, urb->transfer_buffer,
183 dev->report_size)) {
184 /* equal values on interface 0 will be ignored */
185 spin_unlock(&dev->intr_idx_lock);
186 goto exit;
187 }
188 }
189
190 /* aux_idx become next intr_idx */
191 aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1);
192 if (read_idx == aux_idx) {
193 /* queue full, dropping oldest input */
194 read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx;
195 atomic_set(&dev->read_idx, read_idx);
196 atomic_set(&dev->overflow_flag, 1);
197 }
198
199 /* +1 for serial number */
200 offset = intr_idx * (dev->report_size + 1);
201 memcpy(dev->read_queue + offset, urb->transfer_buffer,
202 dev->report_size);
203 *(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++;
204
205 atomic_set(&dev->intr_idx, aux_idx);
206 spin_unlock(&dev->intr_idx_lock);
207 /* tell the blocking read about the new data */
208 wake_up_interruptible(&dev->read_wait);
209
210exit:
211 retval = usb_submit_urb(urb, GFP_ATOMIC);
212 if (retval)
213 dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n",
214 __func__, retval);
215
216}
217
218/*
219 * USB Callback handler for write-ops
220 */
221static void iowarrior_write_callback(struct urb *urb)
222{
223 struct iowarrior *dev;
224 int status = urb->status;
225
226 dev = urb->context;
227 /* sync/async unlink faults aren't errors */
228 if (status &&
229 !(status == -ENOENT ||
230 status == -ECONNRESET || status == -ESHUTDOWN)) {
231 dev_dbg(&dev->interface->dev,
232 "nonzero write bulk status received: %d\n", status);
233 }
234 /* free up our allocated buffer */
235 usb_free_coherent(urb->dev, urb->transfer_buffer_length,
236 urb->transfer_buffer, urb->transfer_dma);
237 /* tell a waiting writer the interrupt-out-pipe is available again */
238 atomic_dec(&dev->write_busy);
239 wake_up_interruptible(&dev->write_wait);
240}
241
242/**
243 * iowarrior_delete
244 */
245static inline void iowarrior_delete(struct iowarrior *dev)
246{
247 dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
248 kfree(dev->int_in_buffer);
249 usb_free_urb(dev->int_in_urb);
250 kfree(dev->read_queue);
251 kfree(dev);
252}
253
254/*---------------------*/
255/* fops implementation */
256/*---------------------*/
257
258static int read_index(struct iowarrior *dev)
259{
260 int intr_idx, read_idx;
261
262 read_idx = atomic_read(&dev->read_idx);
263 intr_idx = atomic_read(&dev->intr_idx);
264
265 return (read_idx == intr_idx ? -1 : read_idx);
266}
267
268/**
269 * iowarrior_read
270 */
271static ssize_t iowarrior_read(struct file *file, char __user *buffer,
272 size_t count, loff_t *ppos)
273{
274 struct iowarrior *dev;
275 int read_idx;
276 int offset;
277
278 dev = file->private_data;
279
280 /* verify that the device wasn't unplugged */
281 if (dev == NULL || !dev->present)
282 return -ENODEV;
283
284 dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
285 dev->minor, count);
286
287 /* read count must be packet size (+ time stamp) */
288 if ((count != dev->report_size)
289 && (count != (dev->report_size + 1)))
290 return -EINVAL;
291
292 /* repeat until no buffer overrun in callback handler occur */
293 do {
294 atomic_set(&dev->overflow_flag, 0);
295 if ((read_idx = read_index(dev)) == -1) {
296 /* queue empty */
297 if (file->f_flags & O_NONBLOCK)
298 return -EAGAIN;
299 else {
300 //next line will return when there is either new data, or the device is unplugged
301 int r = wait_event_interruptible(dev->read_wait,
302 (!dev->present
303 || (read_idx =
304 read_index
305 (dev)) !=
306 -1));
307 if (r) {
308 //we were interrupted by a signal
309 return -ERESTART;
310 }
311 if (!dev->present) {
312 //The device was unplugged
313 return -ENODEV;
314 }
315 if (read_idx == -1) {
316 // Can this happen ???
317 return 0;
318 }
319 }
320 }
321
322 offset = read_idx * (dev->report_size + 1);
323 if (copy_to_user(buffer, dev->read_queue + offset, count)) {
324 return -EFAULT;
325 }
326 } while (atomic_read(&dev->overflow_flag));
327
328 read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx;
329 atomic_set(&dev->read_idx, read_idx);
330 return count;
331}
332
333/*
334 * iowarrior_write
335 */
336static ssize_t iowarrior_write(struct file *file,
337 const char __user *user_buffer,
338 size_t count, loff_t *ppos)
339{
340 struct iowarrior *dev;
341 int retval = 0;
342 char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */
343 struct urb *int_out_urb = NULL;
344
345 dev = file->private_data;
346
347 mutex_lock(&dev->mutex);
348 /* verify that the device wasn't unplugged */
349 if (!dev->present) {
350 retval = -ENODEV;
351 goto exit;
352 }
353 dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
354 dev->minor, count);
355 /* if count is 0 we're already done */
356 if (count == 0) {
357 retval = 0;
358 goto exit;
359 }
360 /* We only accept full reports */
361 if (count != dev->report_size) {
362 retval = -EINVAL;
363 goto exit;
364 }
365 switch (dev->product_id) {
366 case USB_DEVICE_ID_CODEMERCS_IOW24:
367 case USB_DEVICE_ID_CODEMERCS_IOWPV1:
368 case USB_DEVICE_ID_CODEMERCS_IOWPV2:
369 case USB_DEVICE_ID_CODEMERCS_IOW40:
370 /* IOW24 and IOW40 use a synchronous call */
371 buf = kmalloc(count, GFP_KERNEL);
372 if (!buf) {
373 retval = -ENOMEM;
374 goto exit;
375 }
376 if (copy_from_user(buf, user_buffer, count)) {
377 retval = -EFAULT;
378 kfree(buf);
379 goto exit;
380 }
381 retval = usb_set_report(dev->interface, 2, 0, buf, count);
382 kfree(buf);
383 goto exit;
384 break;
385 case USB_DEVICE_ID_CODEMERCS_IOW56:
386 /* The IOW56 uses asynchronous IO and more urbs */
387 if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
388 /* Wait until we are below the limit for submitted urbs */
389 if (file->f_flags & O_NONBLOCK) {
390 retval = -EAGAIN;
391 goto exit;
392 } else {
393 retval = wait_event_interruptible(dev->write_wait,
394 (!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT)));
395 if (retval) {
396 /* we were interrupted by a signal */
397 retval = -ERESTART;
398 goto exit;
399 }
400 if (!dev->present) {
401 /* The device was unplugged */
402 retval = -ENODEV;
403 goto exit;
404 }
405 if (!dev->opened) {
406 /* We were closed while waiting for an URB */
407 retval = -ENODEV;
408 goto exit;
409 }
410 }
411 }
412 atomic_inc(&dev->write_busy);
413 int_out_urb = usb_alloc_urb(0, GFP_KERNEL);
414 if (!int_out_urb) {
415 retval = -ENOMEM;
416 dev_dbg(&dev->interface->dev,
417 "Unable to allocate urb\n");
418 goto error_no_urb;
419 }
420 buf = usb_alloc_coherent(dev->udev, dev->report_size,
421 GFP_KERNEL, &int_out_urb->transfer_dma);
422 if (!buf) {
423 retval = -ENOMEM;
424 dev_dbg(&dev->interface->dev,
425 "Unable to allocate buffer\n");
426 goto error_no_buffer;
427 }
428 usb_fill_int_urb(int_out_urb, dev->udev,
429 usb_sndintpipe(dev->udev,
430 dev->int_out_endpoint->bEndpointAddress),
431 buf, dev->report_size,
432 iowarrior_write_callback, dev,
433 dev->int_out_endpoint->bInterval);
434 int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
435 if (copy_from_user(buf, user_buffer, count)) {
436 retval = -EFAULT;
437 goto error;
438 }
439 retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
440 if (retval) {
441 dev_dbg(&dev->interface->dev,
442 "submit error %d for urb nr.%d\n",
443 retval, atomic_read(&dev->write_busy));
444 goto error;
445 }
446 /* submit was ok */
447 retval = count;
448 usb_free_urb(int_out_urb);
449 goto exit;
450 break;
451 default:
452 /* what do we have here ? An unsupported Product-ID ? */
453 dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n",
454 __func__, dev->product_id);
455 retval = -EFAULT;
456 goto exit;
457 break;
458 }
459error:
460 usb_free_coherent(dev->udev, dev->report_size, buf,
461 int_out_urb->transfer_dma);
462error_no_buffer:
463 usb_free_urb(int_out_urb);
464error_no_urb:
465 atomic_dec(&dev->write_busy);
466 wake_up_interruptible(&dev->write_wait);
467exit:
468 mutex_unlock(&dev->mutex);
469 return retval;
470}
471
472/**
473 * iowarrior_ioctl
474 */
475static long iowarrior_ioctl(struct file *file, unsigned int cmd,
476 unsigned long arg)
477{
478 struct iowarrior *dev = NULL;
479 __u8 *buffer;
480 __u8 __user *user_buffer;
481 int retval;
482 int io_res; /* checks for bytes read/written and copy_to/from_user results */
483
484 dev = file->private_data;
485 if (dev == NULL) {
486 return -ENODEV;
487 }
488
489 buffer = kzalloc(dev->report_size, GFP_KERNEL);
490 if (!buffer)
491 return -ENOMEM;
492
493 /* lock this object */
494 mutex_lock(&iowarrior_mutex);
495 mutex_lock(&dev->mutex);
496
497 /* verify that the device wasn't unplugged */
498 if (!dev->present) {
499 retval = -ENODEV;
500 goto error_out;
501 }
502
503 dev_dbg(&dev->interface->dev, "minor %d, cmd 0x%.4x, arg %ld\n",
504 dev->minor, cmd, arg);
505
506 retval = 0;
507 io_res = 0;
508 switch (cmd) {
509 case IOW_WRITE:
510 if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 ||
511 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 ||
512 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 ||
513 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) {
514 user_buffer = (__u8 __user *)arg;
515 io_res = copy_from_user(buffer, user_buffer,
516 dev->report_size);
517 if (io_res) {
518 retval = -EFAULT;
519 } else {
520 io_res = usb_set_report(dev->interface, 2, 0,
521 buffer,
522 dev->report_size);
523 if (io_res < 0)
524 retval = io_res;
525 }
526 } else {
527 retval = -EINVAL;
528 dev_err(&dev->interface->dev,
529 "ioctl 'IOW_WRITE' is not supported for product=0x%x.\n",
530 dev->product_id);
531 }
532 break;
533 case IOW_READ:
534 user_buffer = (__u8 __user *)arg;
535 io_res = usb_get_report(dev->udev,
536 dev->interface->cur_altsetting, 1, 0,
537 buffer, dev->report_size);
538 if (io_res < 0)
539 retval = io_res;
540 else {
541 io_res = copy_to_user(user_buffer, buffer, dev->report_size);
542 if (io_res)
543 retval = -EFAULT;
544 }
545 break;
546 case IOW_GETINFO:
547 {
548 /* Report available information for the device */
549 struct iowarrior_info info;
550 /* needed for power consumption */
551 struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
552
553 memset(&info, 0, sizeof(info));
554 /* directly from the descriptor */
555 info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
556 info.product = dev->product_id;
557 info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
558
559 /* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
560 info.speed = le16_to_cpu(dev->udev->speed);
561 info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
562 info.report_size = dev->report_size;
563
564 /* serial number string has been read earlier 8 chars or empty string */
565 memcpy(info.serial, dev->chip_serial,
566 sizeof(dev->chip_serial));
567 if (cfg_descriptor == NULL) {
568 info.power = -1; /* no information available */
569 } else {
570 /* the MaxPower is stored in units of 2mA to make it fit into a byte-value */
571 info.power = cfg_descriptor->bMaxPower * 2;
572 }
573 io_res = copy_to_user((struct iowarrior_info __user *)arg, &info,
574 sizeof(struct iowarrior_info));
575 if (io_res)
576 retval = -EFAULT;
577 break;
578 }
579 default:
580 /* return that we did not understand this ioctl call */
581 retval = -ENOTTY;
582 break;
583 }
584error_out:
585 /* unlock the device */
586 mutex_unlock(&dev->mutex);
587 mutex_unlock(&iowarrior_mutex);
588 kfree(buffer);
589 return retval;
590}
591
592/**
593 * iowarrior_open
594 */
595static int iowarrior_open(struct inode *inode, struct file *file)
596{
597 struct iowarrior *dev = NULL;
598 struct usb_interface *interface;
599 int subminor;
600 int retval = 0;
601
602 mutex_lock(&iowarrior_mutex);
603 subminor = iminor(inode);
604
605 interface = usb_find_interface(&iowarrior_driver, subminor);
606 if (!interface) {
607 mutex_unlock(&iowarrior_mutex);
608 printk(KERN_ERR "%s - error, can't find device for minor %d\n",
609 __func__, subminor);
610 return -ENODEV;
611 }
612
613 mutex_lock(&iowarrior_open_disc_lock);
614 dev = usb_get_intfdata(interface);
615 if (!dev) {
616 mutex_unlock(&iowarrior_open_disc_lock);
617 mutex_unlock(&iowarrior_mutex);
618 return -ENODEV;
619 }
620
621 mutex_lock(&dev->mutex);
622 mutex_unlock(&iowarrior_open_disc_lock);
623
624 /* Only one process can open each device, no sharing. */
625 if (dev->opened) {
626 retval = -EBUSY;
627 goto out;
628 }
629
630 /* setup interrupt handler for receiving values */
631 if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) {
632 dev_err(&interface->dev, "Error %d while submitting URB\n", retval);
633 retval = -EFAULT;
634 goto out;
635 }
636 /* increment our usage count for the driver */
637 ++dev->opened;
638 /* save our object in the file's private structure */
639 file->private_data = dev;
640 retval = 0;
641
642out:
643 mutex_unlock(&dev->mutex);
644 mutex_unlock(&iowarrior_mutex);
645 return retval;
646}
647
648/**
649 * iowarrior_release
650 */
651static int iowarrior_release(struct inode *inode, struct file *file)
652{
653 struct iowarrior *dev;
654 int retval = 0;
655
656 dev = file->private_data;
657 if (dev == NULL) {
658 return -ENODEV;
659 }
660
661 dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
662
663 /* lock our device */
664 mutex_lock(&dev->mutex);
665
666 if (dev->opened <= 0) {
667 retval = -ENODEV; /* close called more than once */
668 mutex_unlock(&dev->mutex);
669 } else {
670 dev->opened = 0; /* we're closing now */
671 retval = 0;
672 if (dev->present) {
673 /*
674 The device is still connected so we only shutdown
675 pending read-/write-ops.
676 */
677 usb_kill_urb(dev->int_in_urb);
678 wake_up_interruptible(&dev->read_wait);
679 wake_up_interruptible(&dev->write_wait);
680 mutex_unlock(&dev->mutex);
681 } else {
682 /* The device was unplugged, cleanup resources */
683 mutex_unlock(&dev->mutex);
684 iowarrior_delete(dev);
685 }
686 }
687 return retval;
688}
689
690static unsigned iowarrior_poll(struct file *file, poll_table * wait)
691{
692 struct iowarrior *dev = file->private_data;
693 unsigned int mask = 0;
694
695 if (!dev->present)
696 return POLLERR | POLLHUP;
697
698 poll_wait(file, &dev->read_wait, wait);
699 poll_wait(file, &dev->write_wait, wait);
700
701 if (!dev->present)
702 return POLLERR | POLLHUP;
703
704 if (read_index(dev) != -1)
705 mask |= POLLIN | POLLRDNORM;
706
707 if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT)
708 mask |= POLLOUT | POLLWRNORM;
709 return mask;
710}
711
712/*
713 * File operations needed when we register this driver.
714 * This assumes that this driver NEEDS file operations,
715 * of course, which means that the driver is expected
716 * to have a node in the /dev directory. If the USB
717 * device were for a network interface then the driver
718 * would use "struct net_driver" instead, and a serial
719 * device would use "struct tty_driver".
720 */
721static const struct file_operations iowarrior_fops = {
722 .owner = THIS_MODULE,
723 .write = iowarrior_write,
724 .read = iowarrior_read,
725 .unlocked_ioctl = iowarrior_ioctl,
726 .open = iowarrior_open,
727 .release = iowarrior_release,
728 .poll = iowarrior_poll,
729 .llseek = noop_llseek,
730};
731
732static char *iowarrior_devnode(struct device *dev, umode_t *mode)
733{
734 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
735}
736
737/*
738 * usb class driver info in order to get a minor number from the usb core,
739 * and to have the device registered with devfs and the driver core
740 */
741static struct usb_class_driver iowarrior_class = {
742 .name = "iowarrior%d",
743 .devnode = iowarrior_devnode,
744 .fops = &iowarrior_fops,
745 .minor_base = IOWARRIOR_MINOR_BASE,
746};
747
748/*---------------------------------*/
749/* probe and disconnect functions */
750/*---------------------------------*/
751/**
752 * iowarrior_probe
753 *
754 * Called by the usb core when a new device is connected that it thinks
755 * this driver might be interested in.
756 */
757static int iowarrior_probe(struct usb_interface *interface,
758 const struct usb_device_id *id)
759{
760 struct usb_device *udev = interface_to_usbdev(interface);
761 struct iowarrior *dev = NULL;
762 struct usb_host_interface *iface_desc;
763 struct usb_endpoint_descriptor *endpoint;
764 int i;
765 int retval = -ENOMEM;
766
767 /* allocate memory for our device state and initialize it */
768 dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
769 if (dev == NULL) {
770 dev_err(&interface->dev, "Out of memory\n");
771 return retval;
772 }
773
774 mutex_init(&dev->mutex);
775
776 atomic_set(&dev->intr_idx, 0);
777 atomic_set(&dev->read_idx, 0);
778 spin_lock_init(&dev->intr_idx_lock);
779 atomic_set(&dev->overflow_flag, 0);
780 init_waitqueue_head(&dev->read_wait);
781 atomic_set(&dev->write_busy, 0);
782 init_waitqueue_head(&dev->write_wait);
783
784 dev->udev = udev;
785 dev->interface = interface;
786
787 iface_desc = interface->cur_altsetting;
788 dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
789
790 if (iface_desc->desc.bNumEndpoints < 1) {
791 dev_err(&interface->dev, "Invalid number of endpoints\n");
792 retval = -EINVAL;
793 goto error;
794 }
795
796 /* set up the endpoint information */
797 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
798 endpoint = &iface_desc->endpoint[i].desc;
799
800 if (usb_endpoint_is_int_in(endpoint))
801 dev->int_in_endpoint = endpoint;
802 if (usb_endpoint_is_int_out(endpoint))
803 /* this one will match for the IOWarrior56 only */
804 dev->int_out_endpoint = endpoint;
805 }
806 /* we have to check the report_size often, so remember it in the endianness suitable for our machine */
807 dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
808 if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
809 (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56))
810 /* IOWarrior56 has wMaxPacketSize different from report size */
811 dev->report_size = 7;
812
813 /* create the urb and buffer for reading */
814 dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
815 if (!dev->int_in_urb) {
816 dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n");
817 goto error;
818 }
819 dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL);
820 if (!dev->int_in_buffer) {
821 dev_err(&interface->dev, "Couldn't allocate int_in_buffer\n");
822 goto error;
823 }
824 usb_fill_int_urb(dev->int_in_urb, dev->udev,
825 usb_rcvintpipe(dev->udev,
826 dev->int_in_endpoint->bEndpointAddress),
827 dev->int_in_buffer, dev->report_size,
828 iowarrior_callback, dev,
829 dev->int_in_endpoint->bInterval);
830 /* create an internal buffer for interrupt data from the device */
831 dev->read_queue =
832 kmalloc(((dev->report_size + 1) * MAX_INTERRUPT_BUFFER),
833 GFP_KERNEL);
834 if (!dev->read_queue) {
835 dev_err(&interface->dev, "Couldn't allocate read_queue\n");
836 goto error;
837 }
838 /* Get the serial-number of the chip */
839 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
840 usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial,
841 sizeof(dev->chip_serial));
842 if (strlen(dev->chip_serial) != 8)
843 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
844
845 /* Set the idle timeout to 0, if this is interface 0 */
846 if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
847 usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
848 0x0A,
849 USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
850 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
851 }
852 /* allow device read and ioctl */
853 dev->present = 1;
854
855 /* we can register the device now, as it is ready */
856 usb_set_intfdata(interface, dev);
857
858 retval = usb_register_dev(interface, &iowarrior_class);
859 if (retval) {
860 /* something prevented us from registering this driver */
861 dev_err(&interface->dev, "Not able to get a minor for this device.\n");
862 usb_set_intfdata(interface, NULL);
863 goto error;
864 }
865
866 dev->minor = interface->minor;
867
868 /* let the user know what node this device is now attached to */
869 dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d "
870 "now attached to iowarrior%d\n", dev->product_id, dev->chip_serial,
871 iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE);
872 return retval;
873
874error:
875 iowarrior_delete(dev);
876 return retval;
877}
878
879/**
880 * iowarrior_disconnect
881 *
882 * Called by the usb core when the device is removed from the system.
883 */
884static void iowarrior_disconnect(struct usb_interface *interface)
885{
886 struct iowarrior *dev;
887 int minor;
888
889 dev = usb_get_intfdata(interface);
890 mutex_lock(&iowarrior_open_disc_lock);
891 usb_set_intfdata(interface, NULL);
892
893 minor = dev->minor;
894
895 /* give back our minor */
896 usb_deregister_dev(interface, &iowarrior_class);
897
898 mutex_lock(&dev->mutex);
899
900 /* prevent device read, write and ioctl */
901 dev->present = 0;
902
903 mutex_unlock(&dev->mutex);
904 mutex_unlock(&iowarrior_open_disc_lock);
905
906 if (dev->opened) {
907 /* There is a process that holds a filedescriptor to the device ,
908 so we only shutdown read-/write-ops going on.
909 Deleting the device is postponed until close() was called.
910 */
911 usb_kill_urb(dev->int_in_urb);
912 wake_up_interruptible(&dev->read_wait);
913 wake_up_interruptible(&dev->write_wait);
914 } else {
915 /* no process is using the device, cleanup now */
916 iowarrior_delete(dev);
917 }
918
919 dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n",
920 minor - IOWARRIOR_MINOR_BASE);
921}
922
923/* usb specific object needed to register this driver with the usb subsystem */
924static struct usb_driver iowarrior_driver = {
925 .name = "iowarrior",
926 .probe = iowarrior_probe,
927 .disconnect = iowarrior_disconnect,
928 .id_table = iowarrior_ids,
929};
930
931module_usb_driver(iowarrior_driver);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Native support for the I/O-Warrior USB devices
4 *
5 * Copyright (c) 2003-2005 Code Mercenaries GmbH
6 * written by Christian Lucht <lucht@codemercs.com>
7 *
8 * based on
9
10 * usb-skeleton.c by Greg Kroah-Hartman <greg@kroah.com>
11 * brlvger.c by Stephane Dalton <sdalton@videotron.ca>
12 * and St�hane Doyon <s.doyon@videotron.ca>
13 *
14 * Released under the GPLv2.
15 */
16
17#include <linux/module.h>
18#include <linux/usb.h>
19#include <linux/slab.h>
20#include <linux/sched.h>
21#include <linux/mutex.h>
22#include <linux/poll.h>
23#include <linux/usb/iowarrior.h>
24
25#define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>"
26#define DRIVER_DESC "USB IO-Warrior driver"
27
28#define USB_VENDOR_ID_CODEMERCS 1984
29/* low speed iowarrior */
30#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
31#define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501
32#define USB_DEVICE_ID_CODEMERCS_IOWPV1 0x1511
33#define USB_DEVICE_ID_CODEMERCS_IOWPV2 0x1512
34/* full speed iowarrior */
35#define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503
36
37/* Get a minor range for your devices from the usb maintainer */
38#ifdef CONFIG_USB_DYNAMIC_MINORS
39#define IOWARRIOR_MINOR_BASE 0
40#else
41#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not official yet
42#endif
43
44/* interrupt input queue size */
45#define MAX_INTERRUPT_BUFFER 16
46/*
47 maximum number of urbs that are submitted for writes at the same time,
48 this applies to the IOWarrior56 only!
49 IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls.
50*/
51#define MAX_WRITES_IN_FLIGHT 4
52
53MODULE_AUTHOR(DRIVER_AUTHOR);
54MODULE_DESCRIPTION(DRIVER_DESC);
55MODULE_LICENSE("GPL");
56
57static struct usb_driver iowarrior_driver;
58
59/*--------------*/
60/* data */
61/*--------------*/
62
63/* Structure to hold all of our device specific stuff */
64struct iowarrior {
65 struct mutex mutex; /* locks this structure */
66 struct usb_device *udev; /* save off the usb device pointer */
67 struct usb_interface *interface; /* the interface for this device */
68 unsigned char minor; /* the starting minor number for this device */
69 struct usb_endpoint_descriptor *int_out_endpoint; /* endpoint for reading (needed for IOW56 only) */
70 struct usb_endpoint_descriptor *int_in_endpoint; /* endpoint for reading */
71 struct urb *int_in_urb; /* the urb for reading data */
72 unsigned char *int_in_buffer; /* buffer for data to be read */
73 unsigned char serial_number; /* to detect lost packages */
74 unsigned char *read_queue; /* size is MAX_INTERRUPT_BUFFER * packet size */
75 wait_queue_head_t read_wait;
76 wait_queue_head_t write_wait; /* wait-queue for writing to the device */
77 atomic_t write_busy; /* number of write-urbs submitted */
78 atomic_t read_idx;
79 atomic_t intr_idx;
80 atomic_t overflow_flag; /* signals an index 'rollover' */
81 int present; /* this is 1 as long as the device is connected */
82 int opened; /* this is 1 if the device is currently open */
83 char chip_serial[9]; /* the serial number string of the chip connected */
84 int report_size; /* number of bytes in a report */
85 u16 product_id;
86 struct usb_anchor submitted;
87};
88
89/*--------------*/
90/* globals */
91/*--------------*/
92
93/*
94 * USB spec identifies 5 second timeouts.
95 */
96#define GET_TIMEOUT 5
97#define USB_REQ_GET_REPORT 0x01
98//#if 0
99static int usb_get_report(struct usb_device *dev,
100 struct usb_host_interface *inter, unsigned char type,
101 unsigned char id, void *buf, int size)
102{
103 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
104 USB_REQ_GET_REPORT,
105 USB_DIR_IN | USB_TYPE_CLASS |
106 USB_RECIP_INTERFACE, (type << 8) + id,
107 inter->desc.bInterfaceNumber, buf, size,
108 GET_TIMEOUT*HZ);
109}
110//#endif
111
112#define USB_REQ_SET_REPORT 0x09
113
114static int usb_set_report(struct usb_interface *intf, unsigned char type,
115 unsigned char id, void *buf, int size)
116{
117 return usb_control_msg(interface_to_usbdev(intf),
118 usb_sndctrlpipe(interface_to_usbdev(intf), 0),
119 USB_REQ_SET_REPORT,
120 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
121 (type << 8) + id,
122 intf->cur_altsetting->desc.bInterfaceNumber, buf,
123 size, HZ);
124}
125
126/*---------------------*/
127/* driver registration */
128/*---------------------*/
129/* table of devices that work with this driver */
130static const struct usb_device_id iowarrior_ids[] = {
131 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)},
132 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)},
133 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
134 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)},
135 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
136 {} /* Terminating entry */
137};
138MODULE_DEVICE_TABLE(usb, iowarrior_ids);
139
140/*
141 * USB callback handler for reading data
142 */
143static void iowarrior_callback(struct urb *urb)
144{
145 struct iowarrior *dev = urb->context;
146 int intr_idx;
147 int read_idx;
148 int aux_idx;
149 int offset;
150 int status = urb->status;
151 int retval;
152
153 switch (status) {
154 case 0:
155 /* success */
156 break;
157 case -ECONNRESET:
158 case -ENOENT:
159 case -ESHUTDOWN:
160 return;
161 default:
162 goto exit;
163 }
164
165 intr_idx = atomic_read(&dev->intr_idx);
166 /* aux_idx become previous intr_idx */
167 aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1);
168 read_idx = atomic_read(&dev->read_idx);
169
170 /* queue is not empty and it's interface 0 */
171 if ((intr_idx != read_idx)
172 && (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) {
173 /* + 1 for serial number */
174 offset = aux_idx * (dev->report_size + 1);
175 if (!memcmp
176 (dev->read_queue + offset, urb->transfer_buffer,
177 dev->report_size)) {
178 /* equal values on interface 0 will be ignored */
179 goto exit;
180 }
181 }
182
183 /* aux_idx become next intr_idx */
184 aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1);
185 if (read_idx == aux_idx) {
186 /* queue full, dropping oldest input */
187 read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx;
188 atomic_set(&dev->read_idx, read_idx);
189 atomic_set(&dev->overflow_flag, 1);
190 }
191
192 /* +1 for serial number */
193 offset = intr_idx * (dev->report_size + 1);
194 memcpy(dev->read_queue + offset, urb->transfer_buffer,
195 dev->report_size);
196 *(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++;
197
198 atomic_set(&dev->intr_idx, aux_idx);
199 /* tell the blocking read about the new data */
200 wake_up_interruptible(&dev->read_wait);
201
202exit:
203 retval = usb_submit_urb(urb, GFP_ATOMIC);
204 if (retval)
205 dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n",
206 __func__, retval);
207
208}
209
210/*
211 * USB Callback handler for write-ops
212 */
213static void iowarrior_write_callback(struct urb *urb)
214{
215 struct iowarrior *dev;
216 int status = urb->status;
217
218 dev = urb->context;
219 /* sync/async unlink faults aren't errors */
220 if (status &&
221 !(status == -ENOENT ||
222 status == -ECONNRESET || status == -ESHUTDOWN)) {
223 dev_dbg(&dev->interface->dev,
224 "nonzero write bulk status received: %d\n", status);
225 }
226 /* free up our allocated buffer */
227 usb_free_coherent(urb->dev, urb->transfer_buffer_length,
228 urb->transfer_buffer, urb->transfer_dma);
229 /* tell a waiting writer the interrupt-out-pipe is available again */
230 atomic_dec(&dev->write_busy);
231 wake_up_interruptible(&dev->write_wait);
232}
233
234/**
235 * iowarrior_delete
236 */
237static inline void iowarrior_delete(struct iowarrior *dev)
238{
239 dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
240 kfree(dev->int_in_buffer);
241 usb_free_urb(dev->int_in_urb);
242 kfree(dev->read_queue);
243 usb_put_intf(dev->interface);
244 kfree(dev);
245}
246
247/*---------------------*/
248/* fops implementation */
249/*---------------------*/
250
251static int read_index(struct iowarrior *dev)
252{
253 int intr_idx, read_idx;
254
255 read_idx = atomic_read(&dev->read_idx);
256 intr_idx = atomic_read(&dev->intr_idx);
257
258 return (read_idx == intr_idx ? -1 : read_idx);
259}
260
261/**
262 * iowarrior_read
263 */
264static ssize_t iowarrior_read(struct file *file, char __user *buffer,
265 size_t count, loff_t *ppos)
266{
267 struct iowarrior *dev;
268 int read_idx;
269 int offset;
270
271 dev = file->private_data;
272
273 /* verify that the device wasn't unplugged */
274 if (!dev || !dev->present)
275 return -ENODEV;
276
277 dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
278 dev->minor, count);
279
280 /* read count must be packet size (+ time stamp) */
281 if ((count != dev->report_size)
282 && (count != (dev->report_size + 1)))
283 return -EINVAL;
284
285 /* repeat until no buffer overrun in callback handler occur */
286 do {
287 atomic_set(&dev->overflow_flag, 0);
288 if ((read_idx = read_index(dev)) == -1) {
289 /* queue empty */
290 if (file->f_flags & O_NONBLOCK)
291 return -EAGAIN;
292 else {
293 //next line will return when there is either new data, or the device is unplugged
294 int r = wait_event_interruptible(dev->read_wait,
295 (!dev->present
296 || (read_idx =
297 read_index
298 (dev)) !=
299 -1));
300 if (r) {
301 //we were interrupted by a signal
302 return -ERESTART;
303 }
304 if (!dev->present) {
305 //The device was unplugged
306 return -ENODEV;
307 }
308 if (read_idx == -1) {
309 // Can this happen ???
310 return 0;
311 }
312 }
313 }
314
315 offset = read_idx * (dev->report_size + 1);
316 if (copy_to_user(buffer, dev->read_queue + offset, count)) {
317 return -EFAULT;
318 }
319 } while (atomic_read(&dev->overflow_flag));
320
321 read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx;
322 atomic_set(&dev->read_idx, read_idx);
323 return count;
324}
325
326/*
327 * iowarrior_write
328 */
329static ssize_t iowarrior_write(struct file *file,
330 const char __user *user_buffer,
331 size_t count, loff_t *ppos)
332{
333 struct iowarrior *dev;
334 int retval = 0;
335 char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */
336 struct urb *int_out_urb = NULL;
337
338 dev = file->private_data;
339
340 mutex_lock(&dev->mutex);
341 /* verify that the device wasn't unplugged */
342 if (!dev->present) {
343 retval = -ENODEV;
344 goto exit;
345 }
346 dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
347 dev->minor, count);
348 /* if count is 0 we're already done */
349 if (count == 0) {
350 retval = 0;
351 goto exit;
352 }
353 /* We only accept full reports */
354 if (count != dev->report_size) {
355 retval = -EINVAL;
356 goto exit;
357 }
358 switch (dev->product_id) {
359 case USB_DEVICE_ID_CODEMERCS_IOW24:
360 case USB_DEVICE_ID_CODEMERCS_IOWPV1:
361 case USB_DEVICE_ID_CODEMERCS_IOWPV2:
362 case USB_DEVICE_ID_CODEMERCS_IOW40:
363 /* IOW24 and IOW40 use a synchronous call */
364 buf = memdup_user(user_buffer, count);
365 if (IS_ERR(buf)) {
366 retval = PTR_ERR(buf);
367 goto exit;
368 }
369 retval = usb_set_report(dev->interface, 2, 0, buf, count);
370 kfree(buf);
371 goto exit;
372 break;
373 case USB_DEVICE_ID_CODEMERCS_IOW56:
374 /* The IOW56 uses asynchronous IO and more urbs */
375 if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
376 /* Wait until we are below the limit for submitted urbs */
377 if (file->f_flags & O_NONBLOCK) {
378 retval = -EAGAIN;
379 goto exit;
380 } else {
381 retval = wait_event_interruptible(dev->write_wait,
382 (!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT)));
383 if (retval) {
384 /* we were interrupted by a signal */
385 retval = -ERESTART;
386 goto exit;
387 }
388 if (!dev->present) {
389 /* The device was unplugged */
390 retval = -ENODEV;
391 goto exit;
392 }
393 if (!dev->opened) {
394 /* We were closed while waiting for an URB */
395 retval = -ENODEV;
396 goto exit;
397 }
398 }
399 }
400 atomic_inc(&dev->write_busy);
401 int_out_urb = usb_alloc_urb(0, GFP_KERNEL);
402 if (!int_out_urb) {
403 retval = -ENOMEM;
404 goto error_no_urb;
405 }
406 buf = usb_alloc_coherent(dev->udev, dev->report_size,
407 GFP_KERNEL, &int_out_urb->transfer_dma);
408 if (!buf) {
409 retval = -ENOMEM;
410 dev_dbg(&dev->interface->dev,
411 "Unable to allocate buffer\n");
412 goto error_no_buffer;
413 }
414 usb_fill_int_urb(int_out_urb, dev->udev,
415 usb_sndintpipe(dev->udev,
416 dev->int_out_endpoint->bEndpointAddress),
417 buf, dev->report_size,
418 iowarrior_write_callback, dev,
419 dev->int_out_endpoint->bInterval);
420 int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
421 if (copy_from_user(buf, user_buffer, count)) {
422 retval = -EFAULT;
423 goto error;
424 }
425 usb_anchor_urb(int_out_urb, &dev->submitted);
426 retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
427 if (retval) {
428 dev_dbg(&dev->interface->dev,
429 "submit error %d for urb nr.%d\n",
430 retval, atomic_read(&dev->write_busy));
431 usb_unanchor_urb(int_out_urb);
432 goto error;
433 }
434 /* submit was ok */
435 retval = count;
436 usb_free_urb(int_out_urb);
437 goto exit;
438 break;
439 default:
440 /* what do we have here ? An unsupported Product-ID ? */
441 dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n",
442 __func__, dev->product_id);
443 retval = -EFAULT;
444 goto exit;
445 break;
446 }
447error:
448 usb_free_coherent(dev->udev, dev->report_size, buf,
449 int_out_urb->transfer_dma);
450error_no_buffer:
451 usb_free_urb(int_out_urb);
452error_no_urb:
453 atomic_dec(&dev->write_busy);
454 wake_up_interruptible(&dev->write_wait);
455exit:
456 mutex_unlock(&dev->mutex);
457 return retval;
458}
459
460/**
461 * iowarrior_ioctl
462 */
463static long iowarrior_ioctl(struct file *file, unsigned int cmd,
464 unsigned long arg)
465{
466 struct iowarrior *dev = NULL;
467 __u8 *buffer;
468 __u8 __user *user_buffer;
469 int retval;
470 int io_res; /* checks for bytes read/written and copy_to/from_user results */
471
472 dev = file->private_data;
473 if (!dev)
474 return -ENODEV;
475
476 buffer = kzalloc(dev->report_size, GFP_KERNEL);
477 if (!buffer)
478 return -ENOMEM;
479
480 mutex_lock(&dev->mutex);
481
482 /* verify that the device wasn't unplugged */
483 if (!dev->present) {
484 retval = -ENODEV;
485 goto error_out;
486 }
487
488 dev_dbg(&dev->interface->dev, "minor %d, cmd 0x%.4x, arg %ld\n",
489 dev->minor, cmd, arg);
490
491 retval = 0;
492 io_res = 0;
493 switch (cmd) {
494 case IOW_WRITE:
495 if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 ||
496 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 ||
497 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 ||
498 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) {
499 user_buffer = (__u8 __user *)arg;
500 io_res = copy_from_user(buffer, user_buffer,
501 dev->report_size);
502 if (io_res) {
503 retval = -EFAULT;
504 } else {
505 io_res = usb_set_report(dev->interface, 2, 0,
506 buffer,
507 dev->report_size);
508 if (io_res < 0)
509 retval = io_res;
510 }
511 } else {
512 retval = -EINVAL;
513 dev_err(&dev->interface->dev,
514 "ioctl 'IOW_WRITE' is not supported for product=0x%x.\n",
515 dev->product_id);
516 }
517 break;
518 case IOW_READ:
519 user_buffer = (__u8 __user *)arg;
520 io_res = usb_get_report(dev->udev,
521 dev->interface->cur_altsetting, 1, 0,
522 buffer, dev->report_size);
523 if (io_res < 0)
524 retval = io_res;
525 else {
526 io_res = copy_to_user(user_buffer, buffer, dev->report_size);
527 if (io_res)
528 retval = -EFAULT;
529 }
530 break;
531 case IOW_GETINFO:
532 {
533 /* Report available information for the device */
534 struct iowarrior_info info;
535 /* needed for power consumption */
536 struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
537
538 memset(&info, 0, sizeof(info));
539 /* directly from the descriptor */
540 info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
541 info.product = dev->product_id;
542 info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
543
544 /* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
545 info.speed = dev->udev->speed;
546 info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
547 info.report_size = dev->report_size;
548
549 /* serial number string has been read earlier 8 chars or empty string */
550 memcpy(info.serial, dev->chip_serial,
551 sizeof(dev->chip_serial));
552 if (cfg_descriptor == NULL) {
553 info.power = -1; /* no information available */
554 } else {
555 /* the MaxPower is stored in units of 2mA to make it fit into a byte-value */
556 info.power = cfg_descriptor->bMaxPower * 2;
557 }
558 io_res = copy_to_user((struct iowarrior_info __user *)arg, &info,
559 sizeof(struct iowarrior_info));
560 if (io_res)
561 retval = -EFAULT;
562 break;
563 }
564 default:
565 /* return that we did not understand this ioctl call */
566 retval = -ENOTTY;
567 break;
568 }
569error_out:
570 /* unlock the device */
571 mutex_unlock(&dev->mutex);
572 kfree(buffer);
573 return retval;
574}
575
576/**
577 * iowarrior_open
578 */
579static int iowarrior_open(struct inode *inode, struct file *file)
580{
581 struct iowarrior *dev = NULL;
582 struct usb_interface *interface;
583 int subminor;
584 int retval = 0;
585
586 subminor = iminor(inode);
587
588 interface = usb_find_interface(&iowarrior_driver, subminor);
589 if (!interface) {
590 pr_err("%s - error, can't find device for minor %d\n",
591 __func__, subminor);
592 return -ENODEV;
593 }
594
595 dev = usb_get_intfdata(interface);
596 if (!dev)
597 return -ENODEV;
598
599 mutex_lock(&dev->mutex);
600
601 /* Only one process can open each device, no sharing. */
602 if (dev->opened) {
603 retval = -EBUSY;
604 goto out;
605 }
606
607 /* setup interrupt handler for receiving values */
608 if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) {
609 dev_err(&interface->dev, "Error %d while submitting URB\n", retval);
610 retval = -EFAULT;
611 goto out;
612 }
613 /* increment our usage count for the driver */
614 ++dev->opened;
615 /* save our object in the file's private structure */
616 file->private_data = dev;
617 retval = 0;
618
619out:
620 mutex_unlock(&dev->mutex);
621 return retval;
622}
623
624/**
625 * iowarrior_release
626 */
627static int iowarrior_release(struct inode *inode, struct file *file)
628{
629 struct iowarrior *dev;
630 int retval = 0;
631
632 dev = file->private_data;
633 if (!dev)
634 return -ENODEV;
635
636 dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
637
638 /* lock our device */
639 mutex_lock(&dev->mutex);
640
641 if (dev->opened <= 0) {
642 retval = -ENODEV; /* close called more than once */
643 mutex_unlock(&dev->mutex);
644 } else {
645 dev->opened = 0; /* we're closing now */
646 retval = 0;
647 if (dev->present) {
648 /*
649 The device is still connected so we only shutdown
650 pending read-/write-ops.
651 */
652 usb_kill_urb(dev->int_in_urb);
653 wake_up_interruptible(&dev->read_wait);
654 wake_up_interruptible(&dev->write_wait);
655 mutex_unlock(&dev->mutex);
656 } else {
657 /* The device was unplugged, cleanup resources */
658 mutex_unlock(&dev->mutex);
659 iowarrior_delete(dev);
660 }
661 }
662 return retval;
663}
664
665static __poll_t iowarrior_poll(struct file *file, poll_table * wait)
666{
667 struct iowarrior *dev = file->private_data;
668 __poll_t mask = 0;
669
670 if (!dev->present)
671 return EPOLLERR | EPOLLHUP;
672
673 poll_wait(file, &dev->read_wait, wait);
674 poll_wait(file, &dev->write_wait, wait);
675
676 if (!dev->present)
677 return EPOLLERR | EPOLLHUP;
678
679 if (read_index(dev) != -1)
680 mask |= EPOLLIN | EPOLLRDNORM;
681
682 if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT)
683 mask |= EPOLLOUT | EPOLLWRNORM;
684 return mask;
685}
686
687/*
688 * File operations needed when we register this driver.
689 * This assumes that this driver NEEDS file operations,
690 * of course, which means that the driver is expected
691 * to have a node in the /dev directory. If the USB
692 * device were for a network interface then the driver
693 * would use "struct net_driver" instead, and a serial
694 * device would use "struct tty_driver".
695 */
696static const struct file_operations iowarrior_fops = {
697 .owner = THIS_MODULE,
698 .write = iowarrior_write,
699 .read = iowarrior_read,
700 .unlocked_ioctl = iowarrior_ioctl,
701 .open = iowarrior_open,
702 .release = iowarrior_release,
703 .poll = iowarrior_poll,
704 .llseek = noop_llseek,
705};
706
707static char *iowarrior_devnode(struct device *dev, umode_t *mode)
708{
709 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
710}
711
712/*
713 * usb class driver info in order to get a minor number from the usb core,
714 * and to have the device registered with devfs and the driver core
715 */
716static struct usb_class_driver iowarrior_class = {
717 .name = "iowarrior%d",
718 .devnode = iowarrior_devnode,
719 .fops = &iowarrior_fops,
720 .minor_base = IOWARRIOR_MINOR_BASE,
721};
722
723/*---------------------------------*/
724/* probe and disconnect functions */
725/*---------------------------------*/
726/**
727 * iowarrior_probe
728 *
729 * Called by the usb core when a new device is connected that it thinks
730 * this driver might be interested in.
731 */
732static int iowarrior_probe(struct usb_interface *interface,
733 const struct usb_device_id *id)
734{
735 struct usb_device *udev = interface_to_usbdev(interface);
736 struct iowarrior *dev = NULL;
737 struct usb_host_interface *iface_desc;
738 int retval = -ENOMEM;
739 int res;
740
741 /* allocate memory for our device state and initialize it */
742 dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
743 if (!dev)
744 return retval;
745
746 mutex_init(&dev->mutex);
747
748 atomic_set(&dev->intr_idx, 0);
749 atomic_set(&dev->read_idx, 0);
750 atomic_set(&dev->overflow_flag, 0);
751 init_waitqueue_head(&dev->read_wait);
752 atomic_set(&dev->write_busy, 0);
753 init_waitqueue_head(&dev->write_wait);
754
755 dev->udev = udev;
756 dev->interface = usb_get_intf(interface);
757
758 iface_desc = interface->cur_altsetting;
759 dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
760
761 init_usb_anchor(&dev->submitted);
762
763 res = usb_find_last_int_in_endpoint(iface_desc, &dev->int_in_endpoint);
764 if (res) {
765 dev_err(&interface->dev, "no interrupt-in endpoint found\n");
766 retval = res;
767 goto error;
768 }
769
770 if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) {
771 res = usb_find_last_int_out_endpoint(iface_desc,
772 &dev->int_out_endpoint);
773 if (res) {
774 dev_err(&interface->dev, "no interrupt-out endpoint found\n");
775 retval = res;
776 goto error;
777 }
778 }
779
780 /* we have to check the report_size often, so remember it in the endianness suitable for our machine */
781 dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
782 if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
783 (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56))
784 /* IOWarrior56 has wMaxPacketSize different from report size */
785 dev->report_size = 7;
786
787 /* create the urb and buffer for reading */
788 dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
789 if (!dev->int_in_urb)
790 goto error;
791 dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL);
792 if (!dev->int_in_buffer)
793 goto error;
794 usb_fill_int_urb(dev->int_in_urb, dev->udev,
795 usb_rcvintpipe(dev->udev,
796 dev->int_in_endpoint->bEndpointAddress),
797 dev->int_in_buffer, dev->report_size,
798 iowarrior_callback, dev,
799 dev->int_in_endpoint->bInterval);
800 /* create an internal buffer for interrupt data from the device */
801 dev->read_queue =
802 kmalloc_array(dev->report_size + 1, MAX_INTERRUPT_BUFFER,
803 GFP_KERNEL);
804 if (!dev->read_queue)
805 goto error;
806 /* Get the serial-number of the chip */
807 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
808 usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial,
809 sizeof(dev->chip_serial));
810 if (strlen(dev->chip_serial) != 8)
811 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
812
813 /* Set the idle timeout to 0, if this is interface 0 */
814 if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
815 usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
816 0x0A,
817 USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
818 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
819 }
820 /* allow device read and ioctl */
821 dev->present = 1;
822
823 /* we can register the device now, as it is ready */
824 usb_set_intfdata(interface, dev);
825
826 retval = usb_register_dev(interface, &iowarrior_class);
827 if (retval) {
828 /* something prevented us from registering this driver */
829 dev_err(&interface->dev, "Not able to get a minor for this device.\n");
830 goto error;
831 }
832
833 dev->minor = interface->minor;
834
835 /* let the user know what node this device is now attached to */
836 dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d "
837 "now attached to iowarrior%d\n", dev->product_id, dev->chip_serial,
838 iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE);
839 return retval;
840
841error:
842 iowarrior_delete(dev);
843 return retval;
844}
845
846/**
847 * iowarrior_disconnect
848 *
849 * Called by the usb core when the device is removed from the system.
850 */
851static void iowarrior_disconnect(struct usb_interface *interface)
852{
853 struct iowarrior *dev = usb_get_intfdata(interface);
854 int minor = dev->minor;
855
856 usb_deregister_dev(interface, &iowarrior_class);
857
858 mutex_lock(&dev->mutex);
859
860 /* prevent device read, write and ioctl */
861 dev->present = 0;
862
863 if (dev->opened) {
864 /* There is a process that holds a filedescriptor to the device ,
865 so we only shutdown read-/write-ops going on.
866 Deleting the device is postponed until close() was called.
867 */
868 usb_kill_urb(dev->int_in_urb);
869 usb_kill_anchored_urbs(&dev->submitted);
870 wake_up_interruptible(&dev->read_wait);
871 wake_up_interruptible(&dev->write_wait);
872 mutex_unlock(&dev->mutex);
873 } else {
874 /* no process is using the device, cleanup now */
875 mutex_unlock(&dev->mutex);
876 iowarrior_delete(dev);
877 }
878
879 dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n",
880 minor - IOWARRIOR_MINOR_BASE);
881}
882
883/* usb specific object needed to register this driver with the usb subsystem */
884static struct usb_driver iowarrior_driver = {
885 .name = "iowarrior",
886 .probe = iowarrior_probe,
887 .disconnect = iowarrior_disconnect,
888 .id_table = iowarrior_ids,
889};
890
891module_usb_driver(iowarrior_driver);