Loading...
1/*******************************************************************************
2 *
3 * Module Name: rsutils - Utilities for the resource manager
4 *
5 ******************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acnamesp.h"
47#include "acresrc.h"
48
49#define _COMPONENT ACPI_RESOURCES
50ACPI_MODULE_NAME("rsutils")
51
52/*******************************************************************************
53 *
54 * FUNCTION: acpi_rs_decode_bitmask
55 *
56 * PARAMETERS: mask - Bitmask to decode
57 * list - Where the converted list is returned
58 *
59 * RETURN: Count of bits set (length of list)
60 *
61 * DESCRIPTION: Convert a bit mask into a list of values
62 *
63 ******************************************************************************/
64u8 acpi_rs_decode_bitmask(u16 mask, u8 * list)
65{
66 u8 i;
67 u8 bit_count;
68
69 ACPI_FUNCTION_ENTRY();
70
71 /* Decode the mask bits */
72
73 for (i = 0, bit_count = 0; mask; i++) {
74 if (mask & 0x0001) {
75 list[bit_count] = i;
76 bit_count++;
77 }
78
79 mask >>= 1;
80 }
81
82 return (bit_count);
83}
84
85/*******************************************************************************
86 *
87 * FUNCTION: acpi_rs_encode_bitmask
88 *
89 * PARAMETERS: list - List of values to encode
90 * count - Length of list
91 *
92 * RETURN: Encoded bitmask
93 *
94 * DESCRIPTION: Convert a list of values to an encoded bitmask
95 *
96 ******************************************************************************/
97
98u16 acpi_rs_encode_bitmask(u8 * list, u8 count)
99{
100 u32 i;
101 u16 mask;
102
103 ACPI_FUNCTION_ENTRY();
104
105 /* Encode the list into a single bitmask */
106
107 for (i = 0, mask = 0; i < count; i++) {
108 mask |= (0x1 << list[i]);
109 }
110
111 return (mask);
112}
113
114/*******************************************************************************
115 *
116 * FUNCTION: acpi_rs_move_data
117 *
118 * PARAMETERS: destination - Pointer to the destination descriptor
119 * source - Pointer to the source descriptor
120 * item_count - How many items to move
121 * move_type - Byte width
122 *
123 * RETURN: None
124 *
125 * DESCRIPTION: Move multiple data items from one descriptor to another. Handles
126 * alignment issues and endian issues if necessary, as configured
127 * via the ACPI_MOVE_* macros. (This is why a memcpy is not used)
128 *
129 ******************************************************************************/
130
131void
132acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type)
133{
134 u32 i;
135
136 ACPI_FUNCTION_ENTRY();
137
138 /* One move per item */
139
140 for (i = 0; i < item_count; i++) {
141 switch (move_type) {
142 /*
143 * For the 8-bit case, we can perform the move all at once
144 * since there are no alignment or endian issues
145 */
146 case ACPI_RSC_MOVE8:
147 case ACPI_RSC_MOVE_GPIO_RES:
148 case ACPI_RSC_MOVE_SERIAL_VEN:
149 case ACPI_RSC_MOVE_SERIAL_RES:
150
151 memcpy(destination, source, item_count);
152 return;
153
154 /*
155 * 16-, 32-, and 64-bit cases must use the move macros that perform
156 * endian conversion and/or accommodate hardware that cannot perform
157 * misaligned memory transfers
158 */
159 case ACPI_RSC_MOVE16:
160 case ACPI_RSC_MOVE_GPIO_PIN:
161
162 ACPI_MOVE_16_TO_16(&ACPI_CAST_PTR(u16, destination)[i],
163 &ACPI_CAST_PTR(u16, source)[i]);
164 break;
165
166 case ACPI_RSC_MOVE32:
167
168 ACPI_MOVE_32_TO_32(&ACPI_CAST_PTR(u32, destination)[i],
169 &ACPI_CAST_PTR(u32, source)[i]);
170 break;
171
172 case ACPI_RSC_MOVE64:
173
174 ACPI_MOVE_64_TO_64(&ACPI_CAST_PTR(u64, destination)[i],
175 &ACPI_CAST_PTR(u64, source)[i]);
176 break;
177
178 default:
179
180 return;
181 }
182 }
183}
184
185/*******************************************************************************
186 *
187 * FUNCTION: acpi_rs_set_resource_length
188 *
189 * PARAMETERS: total_length - Length of the AML descriptor, including
190 * the header and length fields.
191 * aml - Pointer to the raw AML descriptor
192 *
193 * RETURN: None
194 *
195 * DESCRIPTION: Set the resource_length field of an AML
196 * resource descriptor, both Large and Small descriptors are
197 * supported automatically. Note: Descriptor Type field must
198 * be valid.
199 *
200 ******************************************************************************/
201
202void
203acpi_rs_set_resource_length(acpi_rsdesc_size total_length,
204 union aml_resource *aml)
205{
206 acpi_rs_length resource_length;
207
208 ACPI_FUNCTION_ENTRY();
209
210 /* Length is the total descriptor length minus the header length */
211
212 resource_length = (acpi_rs_length)
213 (total_length - acpi_ut_get_resource_header_length(aml));
214
215 /* Length is stored differently for large and small descriptors */
216
217 if (aml->small_header.descriptor_type & ACPI_RESOURCE_NAME_LARGE) {
218
219 /* Large descriptor -- bytes 1-2 contain the 16-bit length */
220
221 ACPI_MOVE_16_TO_16(&aml->large_header.resource_length,
222 &resource_length);
223 } else {
224 /*
225 * Small descriptor -- bits 2:0 of byte 0 contain the length
226 * Clear any existing length, preserving descriptor type bits
227 */
228 aml->small_header.descriptor_type = (u8)
229 ((aml->small_header.descriptor_type &
230 ~ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK)
231 | resource_length);
232 }
233}
234
235/*******************************************************************************
236 *
237 * FUNCTION: acpi_rs_set_resource_header
238 *
239 * PARAMETERS: descriptor_type - Byte to be inserted as the type
240 * total_length - Length of the AML descriptor, including
241 * the header and length fields.
242 * aml - Pointer to the raw AML descriptor
243 *
244 * RETURN: None
245 *
246 * DESCRIPTION: Set the descriptor_type and resource_length fields of an AML
247 * resource descriptor, both Large and Small descriptors are
248 * supported automatically
249 *
250 ******************************************************************************/
251
252void
253acpi_rs_set_resource_header(u8 descriptor_type,
254 acpi_rsdesc_size total_length,
255 union aml_resource *aml)
256{
257 ACPI_FUNCTION_ENTRY();
258
259 /* Set the Resource Type */
260
261 aml->small_header.descriptor_type = descriptor_type;
262
263 /* Set the Resource Length */
264
265 acpi_rs_set_resource_length(total_length, aml);
266}
267
268/*******************************************************************************
269 *
270 * FUNCTION: acpi_rs_strcpy
271 *
272 * PARAMETERS: destination - Pointer to the destination string
273 * source - Pointer to the source string
274 *
275 * RETURN: String length, including NULL terminator
276 *
277 * DESCRIPTION: Local string copy that returns the string length, saving a
278 * strcpy followed by a strlen.
279 *
280 ******************************************************************************/
281
282static u16 acpi_rs_strcpy(char *destination, char *source)
283{
284 u16 i;
285
286 ACPI_FUNCTION_ENTRY();
287
288 for (i = 0; source[i]; i++) {
289 destination[i] = source[i];
290 }
291
292 destination[i] = 0;
293
294 /* Return string length including the NULL terminator */
295
296 return ((u16) (i + 1));
297}
298
299/*******************************************************************************
300 *
301 * FUNCTION: acpi_rs_get_resource_source
302 *
303 * PARAMETERS: resource_length - Length field of the descriptor
304 * minimum_length - Minimum length of the descriptor (minus
305 * any optional fields)
306 * resource_source - Where the resource_source is returned
307 * aml - Pointer to the raw AML descriptor
308 * string_ptr - (optional) where to store the actual
309 * resource_source string
310 *
311 * RETURN: Length of the string plus NULL terminator, rounded up to native
312 * word boundary
313 *
314 * DESCRIPTION: Copy the optional resource_source data from a raw AML descriptor
315 * to an internal resource descriptor
316 *
317 ******************************************************************************/
318
319acpi_rs_length
320acpi_rs_get_resource_source(acpi_rs_length resource_length,
321 acpi_rs_length minimum_length,
322 struct acpi_resource_source * resource_source,
323 union aml_resource * aml, char *string_ptr)
324{
325 acpi_rsdesc_size total_length;
326 u8 *aml_resource_source;
327
328 ACPI_FUNCTION_ENTRY();
329
330 total_length =
331 resource_length + sizeof(struct aml_resource_large_header);
332 aml_resource_source = ACPI_ADD_PTR(u8, aml, minimum_length);
333
334 /*
335 * resource_source is present if the length of the descriptor is longer
336 * than the minimum length.
337 *
338 * Note: Some resource descriptors will have an additional null, so
339 * we add 1 to the minimum length.
340 */
341 if (total_length > (acpi_rsdesc_size) (minimum_length + 1)) {
342
343 /* Get the resource_source_index */
344
345 resource_source->index = aml_resource_source[0];
346
347 resource_source->string_ptr = string_ptr;
348 if (!string_ptr) {
349 /*
350 * String destination pointer is not specified; Set the String
351 * pointer to the end of the current resource_source structure.
352 */
353 resource_source->string_ptr =
354 ACPI_ADD_PTR(char, resource_source,
355 sizeof(struct acpi_resource_source));
356 }
357
358 /*
359 * In order for the Resource length to be a multiple of the native
360 * word, calculate the length of the string (+1 for NULL terminator)
361 * and expand to the next word multiple.
362 *
363 * Zero the entire area of the buffer.
364 */
365 total_length =
366 (u32)strlen(ACPI_CAST_PTR(char, &aml_resource_source[1])) +
367 1;
368
369 total_length = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(total_length);
370
371 memset(resource_source->string_ptr, 0, total_length);
372
373 /* Copy the resource_source string to the destination */
374
375 resource_source->string_length =
376 acpi_rs_strcpy(resource_source->string_ptr,
377 ACPI_CAST_PTR(char,
378 &aml_resource_source[1]));
379
380 return ((acpi_rs_length) total_length);
381 }
382
383 /* resource_source is not present */
384
385 resource_source->index = 0;
386 resource_source->string_length = 0;
387 resource_source->string_ptr = NULL;
388 return (0);
389}
390
391/*******************************************************************************
392 *
393 * FUNCTION: acpi_rs_set_resource_source
394 *
395 * PARAMETERS: aml - Pointer to the raw AML descriptor
396 * minimum_length - Minimum length of the descriptor (minus
397 * any optional fields)
398 * resource_source - Internal resource_source
399
400 *
401 * RETURN: Total length of the AML descriptor
402 *
403 * DESCRIPTION: Convert an optional resource_source from internal format to a
404 * raw AML resource descriptor
405 *
406 ******************************************************************************/
407
408acpi_rsdesc_size
409acpi_rs_set_resource_source(union aml_resource * aml,
410 acpi_rs_length minimum_length,
411 struct acpi_resource_source * resource_source)
412{
413 u8 *aml_resource_source;
414 acpi_rsdesc_size descriptor_length;
415
416 ACPI_FUNCTION_ENTRY();
417
418 descriptor_length = minimum_length;
419
420 /* Non-zero string length indicates presence of a resource_source */
421
422 if (resource_source->string_length) {
423
424 /* Point to the end of the AML descriptor */
425
426 aml_resource_source = ACPI_ADD_PTR(u8, aml, minimum_length);
427
428 /* Copy the resource_source_index */
429
430 aml_resource_source[0] = (u8) resource_source->index;
431
432 /* Copy the resource_source string */
433
434 strcpy(ACPI_CAST_PTR(char, &aml_resource_source[1]),
435 resource_source->string_ptr);
436
437 /*
438 * Add the length of the string (+ 1 for null terminator) to the
439 * final descriptor length
440 */
441 descriptor_length += ((acpi_rsdesc_size)
442 resource_source->string_length + 1);
443 }
444
445 /* Return the new total length of the AML descriptor */
446
447 return (descriptor_length);
448}
449
450/*******************************************************************************
451 *
452 * FUNCTION: acpi_rs_get_prt_method_data
453 *
454 * PARAMETERS: node - Device node
455 * ret_buffer - Pointer to a buffer structure for the
456 * results
457 *
458 * RETURN: Status
459 *
460 * DESCRIPTION: This function is called to get the _PRT value of an object
461 * contained in an object specified by the handle passed in
462 *
463 * If the function fails an appropriate status will be returned
464 * and the contents of the callers buffer is undefined.
465 *
466 ******************************************************************************/
467
468acpi_status
469acpi_rs_get_prt_method_data(struct acpi_namespace_node * node,
470 struct acpi_buffer * ret_buffer)
471{
472 union acpi_operand_object *obj_desc;
473 acpi_status status;
474
475 ACPI_FUNCTION_TRACE(rs_get_prt_method_data);
476
477 /* Parameters guaranteed valid by caller */
478
479 /* Execute the method, no parameters */
480
481 status =
482 acpi_ut_evaluate_object(node, METHOD_NAME__PRT, ACPI_BTYPE_PACKAGE,
483 &obj_desc);
484 if (ACPI_FAILURE(status)) {
485 return_ACPI_STATUS(status);
486 }
487
488 /*
489 * Create a resource linked list from the byte stream buffer that comes
490 * back from the _CRS method execution.
491 */
492 status = acpi_rs_create_pci_routing_table(obj_desc, ret_buffer);
493
494 /* On exit, we must delete the object returned by evaluate_object */
495
496 acpi_ut_remove_reference(obj_desc);
497 return_ACPI_STATUS(status);
498}
499
500/*******************************************************************************
501 *
502 * FUNCTION: acpi_rs_get_crs_method_data
503 *
504 * PARAMETERS: node - Device node
505 * ret_buffer - Pointer to a buffer structure for the
506 * results
507 *
508 * RETURN: Status
509 *
510 * DESCRIPTION: This function is called to get the _CRS value of an object
511 * contained in an object specified by the handle passed in
512 *
513 * If the function fails an appropriate status will be returned
514 * and the contents of the callers buffer is undefined.
515 *
516 ******************************************************************************/
517
518acpi_status
519acpi_rs_get_crs_method_data(struct acpi_namespace_node *node,
520 struct acpi_buffer *ret_buffer)
521{
522 union acpi_operand_object *obj_desc;
523 acpi_status status;
524
525 ACPI_FUNCTION_TRACE(rs_get_crs_method_data);
526
527 /* Parameters guaranteed valid by caller */
528
529 /* Execute the method, no parameters */
530
531 status =
532 acpi_ut_evaluate_object(node, METHOD_NAME__CRS, ACPI_BTYPE_BUFFER,
533 &obj_desc);
534 if (ACPI_FAILURE(status)) {
535 return_ACPI_STATUS(status);
536 }
537
538 /*
539 * Make the call to create a resource linked list from the
540 * byte stream buffer that comes back from the _CRS method
541 * execution.
542 */
543 status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
544
545 /* On exit, we must delete the object returned by evaluateObject */
546
547 acpi_ut_remove_reference(obj_desc);
548 return_ACPI_STATUS(status);
549}
550
551/*******************************************************************************
552 *
553 * FUNCTION: acpi_rs_get_prs_method_data
554 *
555 * PARAMETERS: node - Device node
556 * ret_buffer - Pointer to a buffer structure for the
557 * results
558 *
559 * RETURN: Status
560 *
561 * DESCRIPTION: This function is called to get the _PRS value of an object
562 * contained in an object specified by the handle passed in
563 *
564 * If the function fails an appropriate status will be returned
565 * and the contents of the callers buffer is undefined.
566 *
567 ******************************************************************************/
568
569acpi_status
570acpi_rs_get_prs_method_data(struct acpi_namespace_node *node,
571 struct acpi_buffer *ret_buffer)
572{
573 union acpi_operand_object *obj_desc;
574 acpi_status status;
575
576 ACPI_FUNCTION_TRACE(rs_get_prs_method_data);
577
578 /* Parameters guaranteed valid by caller */
579
580 /* Execute the method, no parameters */
581
582 status =
583 acpi_ut_evaluate_object(node, METHOD_NAME__PRS, ACPI_BTYPE_BUFFER,
584 &obj_desc);
585 if (ACPI_FAILURE(status)) {
586 return_ACPI_STATUS(status);
587 }
588
589 /*
590 * Make the call to create a resource linked list from the
591 * byte stream buffer that comes back from the _CRS method
592 * execution.
593 */
594 status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
595
596 /* On exit, we must delete the object returned by evaluateObject */
597
598 acpi_ut_remove_reference(obj_desc);
599 return_ACPI_STATUS(status);
600}
601
602/*******************************************************************************
603 *
604 * FUNCTION: acpi_rs_get_aei_method_data
605 *
606 * PARAMETERS: node - Device node
607 * ret_buffer - Pointer to a buffer structure for the
608 * results
609 *
610 * RETURN: Status
611 *
612 * DESCRIPTION: This function is called to get the _AEI value of an object
613 * contained in an object specified by the handle passed in
614 *
615 * If the function fails an appropriate status will be returned
616 * and the contents of the callers buffer is undefined.
617 *
618 ******************************************************************************/
619
620acpi_status
621acpi_rs_get_aei_method_data(struct acpi_namespace_node *node,
622 struct acpi_buffer *ret_buffer)
623{
624 union acpi_operand_object *obj_desc;
625 acpi_status status;
626
627 ACPI_FUNCTION_TRACE(rs_get_aei_method_data);
628
629 /* Parameters guaranteed valid by caller */
630
631 /* Execute the method, no parameters */
632
633 status =
634 acpi_ut_evaluate_object(node, METHOD_NAME__AEI, ACPI_BTYPE_BUFFER,
635 &obj_desc);
636 if (ACPI_FAILURE(status)) {
637 return_ACPI_STATUS(status);
638 }
639
640 /*
641 * Make the call to create a resource linked list from the
642 * byte stream buffer that comes back from the _CRS method
643 * execution.
644 */
645 status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
646
647 /* On exit, we must delete the object returned by evaluateObject */
648
649 acpi_ut_remove_reference(obj_desc);
650 return_ACPI_STATUS(status);
651}
652
653/*******************************************************************************
654 *
655 * FUNCTION: acpi_rs_get_method_data
656 *
657 * PARAMETERS: handle - Handle to the containing object
658 * path - Path to method, relative to Handle
659 * ret_buffer - Pointer to a buffer structure for the
660 * results
661 *
662 * RETURN: Status
663 *
664 * DESCRIPTION: This function is called to get the _CRS or _PRS value of an
665 * object contained in an object specified by the handle passed in
666 *
667 * If the function fails an appropriate status will be returned
668 * and the contents of the callers buffer is undefined.
669 *
670 ******************************************************************************/
671
672acpi_status
673acpi_rs_get_method_data(acpi_handle handle,
674 char *path, struct acpi_buffer *ret_buffer)
675{
676 union acpi_operand_object *obj_desc;
677 acpi_status status;
678
679 ACPI_FUNCTION_TRACE(rs_get_method_data);
680
681 /* Parameters guaranteed valid by caller */
682
683 /* Execute the method, no parameters */
684
685 status =
686 acpi_ut_evaluate_object(ACPI_CAST_PTR
687 (struct acpi_namespace_node, handle), path,
688 ACPI_BTYPE_BUFFER, &obj_desc);
689 if (ACPI_FAILURE(status)) {
690 return_ACPI_STATUS(status);
691 }
692
693 /*
694 * Make the call to create a resource linked list from the
695 * byte stream buffer that comes back from the method
696 * execution.
697 */
698 status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
699
700 /* On exit, we must delete the object returned by evaluate_object */
701
702 acpi_ut_remove_reference(obj_desc);
703 return_ACPI_STATUS(status);
704}
705
706/*******************************************************************************
707 *
708 * FUNCTION: acpi_rs_set_srs_method_data
709 *
710 * PARAMETERS: node - Device node
711 * in_buffer - Pointer to a buffer structure of the
712 * parameter
713 *
714 * RETURN: Status
715 *
716 * DESCRIPTION: This function is called to set the _SRS of an object contained
717 * in an object specified by the handle passed in
718 *
719 * If the function fails an appropriate status will be returned
720 * and the contents of the callers buffer is undefined.
721 *
722 * Note: Parameters guaranteed valid by caller
723 *
724 ******************************************************************************/
725
726acpi_status
727acpi_rs_set_srs_method_data(struct acpi_namespace_node *node,
728 struct acpi_buffer *in_buffer)
729{
730 struct acpi_evaluate_info *info;
731 union acpi_operand_object *args[2];
732 acpi_status status;
733 struct acpi_buffer buffer;
734
735 ACPI_FUNCTION_TRACE(rs_set_srs_method_data);
736
737 /* Allocate and initialize the evaluation information block */
738
739 info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
740 if (!info) {
741 return_ACPI_STATUS(AE_NO_MEMORY);
742 }
743
744 info->prefix_node = node;
745 info->relative_pathname = METHOD_NAME__SRS;
746 info->parameters = args;
747 info->flags = ACPI_IGNORE_RETURN_VALUE;
748
749 /*
750 * The in_buffer parameter will point to a linked list of
751 * resource parameters. It needs to be formatted into a
752 * byte stream to be sent in as an input parameter to _SRS
753 *
754 * Convert the linked list into a byte stream
755 */
756 buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
757 status = acpi_rs_create_aml_resources(in_buffer, &buffer);
758 if (ACPI_FAILURE(status)) {
759 goto cleanup;
760 }
761
762 /* Create and initialize the method parameter object */
763
764 args[0] = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
765 if (!args[0]) {
766 /*
767 * Must free the buffer allocated above (otherwise it is freed
768 * later)
769 */
770 ACPI_FREE(buffer.pointer);
771 status = AE_NO_MEMORY;
772 goto cleanup;
773 }
774
775 args[0]->buffer.length = (u32) buffer.length;
776 args[0]->buffer.pointer = buffer.pointer;
777 args[0]->common.flags = AOPOBJ_DATA_VALID;
778 args[1] = NULL;
779
780 /* Execute the method, no return value is expected */
781
782 status = acpi_ns_evaluate(info);
783
784 /* Clean up and return the status from acpi_ns_evaluate */
785
786 acpi_ut_remove_reference(args[0]);
787
788cleanup:
789 ACPI_FREE(info);
790 return_ACPI_STATUS(status);
791}
1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2/*******************************************************************************
3 *
4 * Module Name: rsutils - Utilities for the resource manager
5 *
6 ******************************************************************************/
7
8#include <acpi/acpi.h>
9#include "accommon.h"
10#include "acnamesp.h"
11#include "acresrc.h"
12
13#define _COMPONENT ACPI_RESOURCES
14ACPI_MODULE_NAME("rsutils")
15
16/*******************************************************************************
17 *
18 * FUNCTION: acpi_rs_decode_bitmask
19 *
20 * PARAMETERS: mask - Bitmask to decode
21 * list - Where the converted list is returned
22 *
23 * RETURN: Count of bits set (length of list)
24 *
25 * DESCRIPTION: Convert a bit mask into a list of values
26 *
27 ******************************************************************************/
28u8 acpi_rs_decode_bitmask(u16 mask, u8 * list)
29{
30 u8 i;
31 u8 bit_count;
32
33 ACPI_FUNCTION_ENTRY();
34
35 /* Decode the mask bits */
36
37 for (i = 0, bit_count = 0; mask; i++) {
38 if (mask & 0x0001) {
39 list[bit_count] = i;
40 bit_count++;
41 }
42
43 mask >>= 1;
44 }
45
46 return (bit_count);
47}
48
49/*******************************************************************************
50 *
51 * FUNCTION: acpi_rs_encode_bitmask
52 *
53 * PARAMETERS: list - List of values to encode
54 * count - Length of list
55 *
56 * RETURN: Encoded bitmask
57 *
58 * DESCRIPTION: Convert a list of values to an encoded bitmask
59 *
60 ******************************************************************************/
61
62u16 acpi_rs_encode_bitmask(u8 * list, u8 count)
63{
64 u32 i;
65 u16 mask;
66
67 ACPI_FUNCTION_ENTRY();
68
69 /* Encode the list into a single bitmask */
70
71 for (i = 0, mask = 0; i < count; i++) {
72 mask |= (0x1 << list[i]);
73 }
74
75 return (mask);
76}
77
78/*******************************************************************************
79 *
80 * FUNCTION: acpi_rs_move_data
81 *
82 * PARAMETERS: destination - Pointer to the destination descriptor
83 * source - Pointer to the source descriptor
84 * item_count - How many items to move
85 * move_type - Byte width
86 *
87 * RETURN: None
88 *
89 * DESCRIPTION: Move multiple data items from one descriptor to another. Handles
90 * alignment issues and endian issues if necessary, as configured
91 * via the ACPI_MOVE_* macros. (This is why a memcpy is not used)
92 *
93 ******************************************************************************/
94
95void
96acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type)
97{
98 u32 i;
99
100 ACPI_FUNCTION_ENTRY();
101
102 /* One move per item */
103
104 for (i = 0; i < item_count; i++) {
105 switch (move_type) {
106 /*
107 * For the 8-bit case, we can perform the move all at once
108 * since there are no alignment or endian issues
109 */
110 case ACPI_RSC_MOVE8:
111 case ACPI_RSC_MOVE_GPIO_RES:
112 case ACPI_RSC_MOVE_SERIAL_VEN:
113 case ACPI_RSC_MOVE_SERIAL_RES:
114
115 memcpy(destination, source, item_count);
116 return;
117
118 /*
119 * 16-, 32-, and 64-bit cases must use the move macros that perform
120 * endian conversion and/or accommodate hardware that cannot perform
121 * misaligned memory transfers
122 */
123 case ACPI_RSC_MOVE16:
124 case ACPI_RSC_MOVE_GPIO_PIN:
125
126 ACPI_MOVE_16_TO_16(&ACPI_CAST_PTR(u16, destination)[i],
127 &ACPI_CAST_PTR(u16, source)[i]);
128 break;
129
130 case ACPI_RSC_MOVE32:
131
132 ACPI_MOVE_32_TO_32(&ACPI_CAST_PTR(u32, destination)[i],
133 &ACPI_CAST_PTR(u32, source)[i]);
134 break;
135
136 case ACPI_RSC_MOVE64:
137
138 ACPI_MOVE_64_TO_64(&ACPI_CAST_PTR(u64, destination)[i],
139 &ACPI_CAST_PTR(u64, source)[i]);
140 break;
141
142 default:
143
144 return;
145 }
146 }
147}
148
149/*******************************************************************************
150 *
151 * FUNCTION: acpi_rs_set_resource_length
152 *
153 * PARAMETERS: total_length - Length of the AML descriptor, including
154 * the header and length fields.
155 * aml - Pointer to the raw AML descriptor
156 *
157 * RETURN: None
158 *
159 * DESCRIPTION: Set the resource_length field of an AML
160 * resource descriptor, both Large and Small descriptors are
161 * supported automatically. Note: Descriptor Type field must
162 * be valid.
163 *
164 ******************************************************************************/
165
166void
167acpi_rs_set_resource_length(acpi_rsdesc_size total_length,
168 union aml_resource *aml)
169{
170 acpi_rs_length resource_length;
171
172 ACPI_FUNCTION_ENTRY();
173
174 /* Length is the total descriptor length minus the header length */
175
176 resource_length = (acpi_rs_length)
177 (total_length - acpi_ut_get_resource_header_length(aml));
178
179 /* Length is stored differently for large and small descriptors */
180
181 if (aml->small_header.descriptor_type & ACPI_RESOURCE_NAME_LARGE) {
182
183 /* Large descriptor -- bytes 1-2 contain the 16-bit length */
184
185 ACPI_MOVE_16_TO_16(&aml->large_header.resource_length,
186 &resource_length);
187 } else {
188 /*
189 * Small descriptor -- bits 2:0 of byte 0 contain the length
190 * Clear any existing length, preserving descriptor type bits
191 */
192 aml->small_header.descriptor_type = (u8)
193 ((aml->small_header.descriptor_type &
194 ~ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK)
195 | resource_length);
196 }
197}
198
199/*******************************************************************************
200 *
201 * FUNCTION: acpi_rs_set_resource_header
202 *
203 * PARAMETERS: descriptor_type - Byte to be inserted as the type
204 * total_length - Length of the AML descriptor, including
205 * the header and length fields.
206 * aml - Pointer to the raw AML descriptor
207 *
208 * RETURN: None
209 *
210 * DESCRIPTION: Set the descriptor_type and resource_length fields of an AML
211 * resource descriptor, both Large and Small descriptors are
212 * supported automatically
213 *
214 ******************************************************************************/
215
216void
217acpi_rs_set_resource_header(u8 descriptor_type,
218 acpi_rsdesc_size total_length,
219 union aml_resource *aml)
220{
221 ACPI_FUNCTION_ENTRY();
222
223 /* Set the Resource Type */
224
225 aml->small_header.descriptor_type = descriptor_type;
226
227 /* Set the Resource Length */
228
229 acpi_rs_set_resource_length(total_length, aml);
230}
231
232/*******************************************************************************
233 *
234 * FUNCTION: acpi_rs_strcpy
235 *
236 * PARAMETERS: destination - Pointer to the destination string
237 * source - Pointer to the source string
238 *
239 * RETURN: String length, including NULL terminator
240 *
241 * DESCRIPTION: Local string copy that returns the string length, saving a
242 * strcpy followed by a strlen.
243 *
244 ******************************************************************************/
245
246static u16 acpi_rs_strcpy(char *destination, char *source)
247{
248 u16 i;
249
250 ACPI_FUNCTION_ENTRY();
251
252 for (i = 0; source[i]; i++) {
253 destination[i] = source[i];
254 }
255
256 destination[i] = 0;
257
258 /* Return string length including the NULL terminator */
259
260 return ((u16) (i + 1));
261}
262
263/*******************************************************************************
264 *
265 * FUNCTION: acpi_rs_get_resource_source
266 *
267 * PARAMETERS: resource_length - Length field of the descriptor
268 * minimum_length - Minimum length of the descriptor (minus
269 * any optional fields)
270 * resource_source - Where the resource_source is returned
271 * aml - Pointer to the raw AML descriptor
272 * string_ptr - (optional) where to store the actual
273 * resource_source string
274 *
275 * RETURN: Length of the string plus NULL terminator, rounded up to native
276 * word boundary
277 *
278 * DESCRIPTION: Copy the optional resource_source data from a raw AML descriptor
279 * to an internal resource descriptor
280 *
281 ******************************************************************************/
282
283acpi_rs_length
284acpi_rs_get_resource_source(acpi_rs_length resource_length,
285 acpi_rs_length minimum_length,
286 struct acpi_resource_source * resource_source,
287 union aml_resource * aml, char *string_ptr)
288{
289 acpi_rsdesc_size total_length;
290 u8 *aml_resource_source;
291
292 ACPI_FUNCTION_ENTRY();
293
294 total_length =
295 resource_length + sizeof(struct aml_resource_large_header);
296 aml_resource_source = ACPI_ADD_PTR(u8, aml, minimum_length);
297
298 /*
299 * resource_source is present if the length of the descriptor is longer
300 * than the minimum length.
301 *
302 * Note: Some resource descriptors will have an additional null, so
303 * we add 1 to the minimum length.
304 */
305 if (total_length > (acpi_rsdesc_size)(minimum_length + 1)) {
306
307 /* Get the resource_source_index */
308
309 resource_source->index = aml_resource_source[0];
310
311 resource_source->string_ptr = string_ptr;
312 if (!string_ptr) {
313 /*
314 * String destination pointer is not specified; Set the String
315 * pointer to the end of the current resource_source structure.
316 */
317 resource_source->string_ptr =
318 ACPI_ADD_PTR(char, resource_source,
319 sizeof(struct acpi_resource_source));
320 }
321
322 /*
323 * In order for the Resource length to be a multiple of the native
324 * word, calculate the length of the string (+1 for NULL terminator)
325 * and expand to the next word multiple.
326 *
327 * Zero the entire area of the buffer.
328 */
329 total_length =
330 (u32)strlen(ACPI_CAST_PTR(char, &aml_resource_source[1])) +
331 1;
332
333 total_length = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(total_length);
334
335 memset(resource_source->string_ptr, 0, total_length);
336
337 /* Copy the resource_source string to the destination */
338
339 resource_source->string_length =
340 acpi_rs_strcpy(resource_source->string_ptr,
341 ACPI_CAST_PTR(char,
342 &aml_resource_source[1]));
343
344 return ((acpi_rs_length)total_length);
345 }
346
347 /* resource_source is not present */
348
349 resource_source->index = 0;
350 resource_source->string_length = 0;
351 resource_source->string_ptr = NULL;
352 return (0);
353}
354
355/*******************************************************************************
356 *
357 * FUNCTION: acpi_rs_set_resource_source
358 *
359 * PARAMETERS: aml - Pointer to the raw AML descriptor
360 * minimum_length - Minimum length of the descriptor (minus
361 * any optional fields)
362 * resource_source - Internal resource_source
363
364 *
365 * RETURN: Total length of the AML descriptor
366 *
367 * DESCRIPTION: Convert an optional resource_source from internal format to a
368 * raw AML resource descriptor
369 *
370 ******************************************************************************/
371
372acpi_rsdesc_size
373acpi_rs_set_resource_source(union aml_resource *aml,
374 acpi_rs_length minimum_length,
375 struct acpi_resource_source *resource_source)
376{
377 u8 *aml_resource_source;
378 acpi_rsdesc_size descriptor_length;
379
380 ACPI_FUNCTION_ENTRY();
381
382 descriptor_length = minimum_length;
383
384 /* Non-zero string length indicates presence of a resource_source */
385
386 if (resource_source->string_length) {
387
388 /* Point to the end of the AML descriptor */
389
390 aml_resource_source = ACPI_ADD_PTR(u8, aml, minimum_length);
391
392 /* Copy the resource_source_index */
393
394 aml_resource_source[0] = (u8) resource_source->index;
395
396 /* Copy the resource_source string */
397
398 strcpy(ACPI_CAST_PTR(char, &aml_resource_source[1]),
399 resource_source->string_ptr);
400
401 /*
402 * Add the length of the string (+ 1 for null terminator) to the
403 * final descriptor length
404 */
405 descriptor_length += ((acpi_rsdesc_size)
406 resource_source->string_length + 1);
407 }
408
409 /* Return the new total length of the AML descriptor */
410
411 return (descriptor_length);
412}
413
414/*******************************************************************************
415 *
416 * FUNCTION: acpi_rs_get_prt_method_data
417 *
418 * PARAMETERS: node - Device node
419 * ret_buffer - Pointer to a buffer structure for the
420 * results
421 *
422 * RETURN: Status
423 *
424 * DESCRIPTION: This function is called to get the _PRT value of an object
425 * contained in an object specified by the handle passed in
426 *
427 * If the function fails an appropriate status will be returned
428 * and the contents of the callers buffer is undefined.
429 *
430 ******************************************************************************/
431
432acpi_status
433acpi_rs_get_prt_method_data(struct acpi_namespace_node *node,
434 struct acpi_buffer *ret_buffer)
435{
436 union acpi_operand_object *obj_desc;
437 acpi_status status;
438
439 ACPI_FUNCTION_TRACE(rs_get_prt_method_data);
440
441 /* Parameters guaranteed valid by caller */
442
443 /* Execute the method, no parameters */
444
445 status =
446 acpi_ut_evaluate_object(node, METHOD_NAME__PRT, ACPI_BTYPE_PACKAGE,
447 &obj_desc);
448 if (ACPI_FAILURE(status)) {
449 return_ACPI_STATUS(status);
450 }
451
452 /*
453 * Create a resource linked list from the byte stream buffer that comes
454 * back from the _CRS method execution.
455 */
456 status = acpi_rs_create_pci_routing_table(obj_desc, ret_buffer);
457
458 /* On exit, we must delete the object returned by evaluate_object */
459
460 acpi_ut_remove_reference(obj_desc);
461 return_ACPI_STATUS(status);
462}
463
464/*******************************************************************************
465 *
466 * FUNCTION: acpi_rs_get_crs_method_data
467 *
468 * PARAMETERS: node - Device node
469 * ret_buffer - Pointer to a buffer structure for the
470 * results
471 *
472 * RETURN: Status
473 *
474 * DESCRIPTION: This function is called to get the _CRS value of an object
475 * contained in an object specified by the handle passed in
476 *
477 * If the function fails an appropriate status will be returned
478 * and the contents of the callers buffer is undefined.
479 *
480 ******************************************************************************/
481
482acpi_status
483acpi_rs_get_crs_method_data(struct acpi_namespace_node *node,
484 struct acpi_buffer *ret_buffer)
485{
486 union acpi_operand_object *obj_desc;
487 acpi_status status;
488
489 ACPI_FUNCTION_TRACE(rs_get_crs_method_data);
490
491 /* Parameters guaranteed valid by caller */
492
493 /* Execute the method, no parameters */
494
495 status =
496 acpi_ut_evaluate_object(node, METHOD_NAME__CRS, ACPI_BTYPE_BUFFER,
497 &obj_desc);
498 if (ACPI_FAILURE(status)) {
499 return_ACPI_STATUS(status);
500 }
501
502 /*
503 * Make the call to create a resource linked list from the
504 * byte stream buffer that comes back from the _CRS method
505 * execution.
506 */
507 status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
508
509 /* On exit, we must delete the object returned by evaluateObject */
510
511 acpi_ut_remove_reference(obj_desc);
512 return_ACPI_STATUS(status);
513}
514
515/*******************************************************************************
516 *
517 * FUNCTION: acpi_rs_get_prs_method_data
518 *
519 * PARAMETERS: node - Device node
520 * ret_buffer - Pointer to a buffer structure for the
521 * results
522 *
523 * RETURN: Status
524 *
525 * DESCRIPTION: This function is called to get the _PRS value of an object
526 * contained in an object specified by the handle passed in
527 *
528 * If the function fails an appropriate status will be returned
529 * and the contents of the callers buffer is undefined.
530 *
531 ******************************************************************************/
532
533acpi_status
534acpi_rs_get_prs_method_data(struct acpi_namespace_node *node,
535 struct acpi_buffer *ret_buffer)
536{
537 union acpi_operand_object *obj_desc;
538 acpi_status status;
539
540 ACPI_FUNCTION_TRACE(rs_get_prs_method_data);
541
542 /* Parameters guaranteed valid by caller */
543
544 /* Execute the method, no parameters */
545
546 status =
547 acpi_ut_evaluate_object(node, METHOD_NAME__PRS, ACPI_BTYPE_BUFFER,
548 &obj_desc);
549 if (ACPI_FAILURE(status)) {
550 return_ACPI_STATUS(status);
551 }
552
553 /*
554 * Make the call to create a resource linked list from the
555 * byte stream buffer that comes back from the _CRS method
556 * execution.
557 */
558 status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
559
560 /* On exit, we must delete the object returned by evaluateObject */
561
562 acpi_ut_remove_reference(obj_desc);
563 return_ACPI_STATUS(status);
564}
565
566/*******************************************************************************
567 *
568 * FUNCTION: acpi_rs_get_aei_method_data
569 *
570 * PARAMETERS: node - Device node
571 * ret_buffer - Pointer to a buffer structure for the
572 * results
573 *
574 * RETURN: Status
575 *
576 * DESCRIPTION: This function is called to get the _AEI value of an object
577 * contained in an object specified by the handle passed in
578 *
579 * If the function fails an appropriate status will be returned
580 * and the contents of the callers buffer is undefined.
581 *
582 ******************************************************************************/
583
584acpi_status
585acpi_rs_get_aei_method_data(struct acpi_namespace_node *node,
586 struct acpi_buffer *ret_buffer)
587{
588 union acpi_operand_object *obj_desc;
589 acpi_status status;
590
591 ACPI_FUNCTION_TRACE(rs_get_aei_method_data);
592
593 /* Parameters guaranteed valid by caller */
594
595 /* Execute the method, no parameters */
596
597 status =
598 acpi_ut_evaluate_object(node, METHOD_NAME__AEI, ACPI_BTYPE_BUFFER,
599 &obj_desc);
600 if (ACPI_FAILURE(status)) {
601 return_ACPI_STATUS(status);
602 }
603
604 /*
605 * Make the call to create a resource linked list from the
606 * byte stream buffer that comes back from the _CRS method
607 * execution.
608 */
609 status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
610
611 /* On exit, we must delete the object returned by evaluateObject */
612
613 acpi_ut_remove_reference(obj_desc);
614 return_ACPI_STATUS(status);
615}
616
617/*******************************************************************************
618 *
619 * FUNCTION: acpi_rs_get_method_data
620 *
621 * PARAMETERS: handle - Handle to the containing object
622 * path - Path to method, relative to Handle
623 * ret_buffer - Pointer to a buffer structure for the
624 * results
625 *
626 * RETURN: Status
627 *
628 * DESCRIPTION: This function is called to get the _CRS or _PRS value of an
629 * object contained in an object specified by the handle passed in
630 *
631 * If the function fails an appropriate status will be returned
632 * and the contents of the callers buffer is undefined.
633 *
634 ******************************************************************************/
635
636acpi_status
637acpi_rs_get_method_data(acpi_handle handle,
638 const char *path, struct acpi_buffer *ret_buffer)
639{
640 union acpi_operand_object *obj_desc;
641 acpi_status status;
642
643 ACPI_FUNCTION_TRACE(rs_get_method_data);
644
645 /* Parameters guaranteed valid by caller */
646
647 /* Execute the method, no parameters */
648
649 status =
650 acpi_ut_evaluate_object(ACPI_CAST_PTR
651 (struct acpi_namespace_node, handle), path,
652 ACPI_BTYPE_BUFFER, &obj_desc);
653 if (ACPI_FAILURE(status)) {
654 return_ACPI_STATUS(status);
655 }
656
657 /*
658 * Make the call to create a resource linked list from the
659 * byte stream buffer that comes back from the method
660 * execution.
661 */
662 status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
663
664 /* On exit, we must delete the object returned by evaluate_object */
665
666 acpi_ut_remove_reference(obj_desc);
667 return_ACPI_STATUS(status);
668}
669
670/*******************************************************************************
671 *
672 * FUNCTION: acpi_rs_set_srs_method_data
673 *
674 * PARAMETERS: node - Device node
675 * in_buffer - Pointer to a buffer structure of the
676 * parameter
677 *
678 * RETURN: Status
679 *
680 * DESCRIPTION: This function is called to set the _SRS of an object contained
681 * in an object specified by the handle passed in
682 *
683 * If the function fails an appropriate status will be returned
684 * and the contents of the callers buffer is undefined.
685 *
686 * Note: Parameters guaranteed valid by caller
687 *
688 ******************************************************************************/
689
690acpi_status
691acpi_rs_set_srs_method_data(struct acpi_namespace_node *node,
692 struct acpi_buffer *in_buffer)
693{
694 struct acpi_evaluate_info *info;
695 union acpi_operand_object *args[2];
696 acpi_status status;
697 struct acpi_buffer buffer;
698
699 ACPI_FUNCTION_TRACE(rs_set_srs_method_data);
700
701 /* Allocate and initialize the evaluation information block */
702
703 info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
704 if (!info) {
705 return_ACPI_STATUS(AE_NO_MEMORY);
706 }
707
708 info->prefix_node = node;
709 info->relative_pathname = METHOD_NAME__SRS;
710 info->parameters = args;
711 info->flags = ACPI_IGNORE_RETURN_VALUE;
712
713 /*
714 * The in_buffer parameter will point to a linked list of
715 * resource parameters. It needs to be formatted into a
716 * byte stream to be sent in as an input parameter to _SRS
717 *
718 * Convert the linked list into a byte stream
719 */
720 buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
721 status = acpi_rs_create_aml_resources(in_buffer, &buffer);
722 if (ACPI_FAILURE(status)) {
723 goto cleanup;
724 }
725
726 /* Create and initialize the method parameter object */
727
728 args[0] = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
729 if (!args[0]) {
730 /*
731 * Must free the buffer allocated above (otherwise it is freed
732 * later)
733 */
734 ACPI_FREE(buffer.pointer);
735 status = AE_NO_MEMORY;
736 goto cleanup;
737 }
738
739 args[0]->buffer.length = (u32) buffer.length;
740 args[0]->buffer.pointer = buffer.pointer;
741 args[0]->common.flags = AOPOBJ_DATA_VALID;
742 args[1] = NULL;
743
744 /* Execute the method, no return value is expected */
745
746 status = acpi_ns_evaluate(info);
747
748 /* Clean up and return the status from acpi_ns_evaluate */
749
750 acpi_ut_remove_reference(args[0]);
751
752cleanup:
753 ACPI_FREE(info);
754 return_ACPI_STATUS(status);
755}