Loading...
1/* Intel PRO/1000 Linux driver
2 * Copyright(c) 1999 - 2015 Intel Corporation.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
11 * more details.
12 *
13 * The full GNU General Public License is included in this distribution in
14 * the file called "COPYING".
15 *
16 * Contact Information:
17 * Linux NICS <linux.nics@intel.com>
18 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
19 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
20 */
21
22#include "e1000.h"
23
24static s32 e1000_wait_autoneg(struct e1000_hw *hw);
25static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
26 u16 *data, bool read, bool page_set);
27static u32 e1000_get_phy_addr_for_hv_page(u32 page);
28static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
29 u16 *data, bool read);
30
31/* Cable length tables */
32static const u16 e1000_m88_cable_length_table[] = {
33 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED
34};
35
36#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
37 ARRAY_SIZE(e1000_m88_cable_length_table)
38
39static const u16 e1000_igp_2_cable_length_table[] = {
40 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
41 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
42 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
43 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
44 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
45 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
46 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
47 124
48};
49
50#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
51 ARRAY_SIZE(e1000_igp_2_cable_length_table)
52
53/**
54 * e1000e_check_reset_block_generic - Check if PHY reset is blocked
55 * @hw: pointer to the HW structure
56 *
57 * Read the PHY management control register and check whether a PHY reset
58 * is blocked. If a reset is not blocked return 0, otherwise
59 * return E1000_BLK_PHY_RESET (12).
60 **/
61s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
62{
63 u32 manc;
64
65 manc = er32(MANC);
66
67 return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : 0;
68}
69
70/**
71 * e1000e_get_phy_id - Retrieve the PHY ID and revision
72 * @hw: pointer to the HW structure
73 *
74 * Reads the PHY registers and stores the PHY ID and possibly the PHY
75 * revision in the hardware structure.
76 **/
77s32 e1000e_get_phy_id(struct e1000_hw *hw)
78{
79 struct e1000_phy_info *phy = &hw->phy;
80 s32 ret_val = 0;
81 u16 phy_id;
82 u16 retry_count = 0;
83
84 if (!phy->ops.read_reg)
85 return 0;
86
87 while (retry_count < 2) {
88 ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id);
89 if (ret_val)
90 return ret_val;
91
92 phy->id = (u32)(phy_id << 16);
93 usleep_range(20, 40);
94 ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
95 if (ret_val)
96 return ret_val;
97
98 phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
99 phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
100
101 if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
102 return 0;
103
104 retry_count++;
105 }
106
107 return 0;
108}
109
110/**
111 * e1000e_phy_reset_dsp - Reset PHY DSP
112 * @hw: pointer to the HW structure
113 *
114 * Reset the digital signal processor.
115 **/
116s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
117{
118 s32 ret_val;
119
120 ret_val = e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
121 if (ret_val)
122 return ret_val;
123
124 return e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0);
125}
126
127/**
128 * e1000e_read_phy_reg_mdic - Read MDI control register
129 * @hw: pointer to the HW structure
130 * @offset: register offset to be read
131 * @data: pointer to the read data
132 *
133 * Reads the MDI control register in the PHY at offset and stores the
134 * information read to data.
135 **/
136s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
137{
138 struct e1000_phy_info *phy = &hw->phy;
139 u32 i, mdic = 0;
140
141 if (offset > MAX_PHY_REG_ADDRESS) {
142 e_dbg("PHY Address %d is out of range\n", offset);
143 return -E1000_ERR_PARAM;
144 }
145
146 /* Set up Op-code, Phy Address, and register offset in the MDI
147 * Control register. The MAC will take care of interfacing with the
148 * PHY to retrieve the desired data.
149 */
150 mdic = ((offset << E1000_MDIC_REG_SHIFT) |
151 (phy->addr << E1000_MDIC_PHY_SHIFT) |
152 (E1000_MDIC_OP_READ));
153
154 ew32(MDIC, mdic);
155
156 /* Poll the ready bit to see if the MDI read completed
157 * Increasing the time out as testing showed failures with
158 * the lower time out
159 */
160 for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
161 udelay(50);
162 mdic = er32(MDIC);
163 if (mdic & E1000_MDIC_READY)
164 break;
165 }
166 if (!(mdic & E1000_MDIC_READY)) {
167 e_dbg("MDI Read did not complete\n");
168 return -E1000_ERR_PHY;
169 }
170 if (mdic & E1000_MDIC_ERROR) {
171 e_dbg("MDI Error\n");
172 return -E1000_ERR_PHY;
173 }
174 if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
175 e_dbg("MDI Read offset error - requested %d, returned %d\n",
176 offset,
177 (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
178 return -E1000_ERR_PHY;
179 }
180 *data = (u16)mdic;
181
182 /* Allow some time after each MDIC transaction to avoid
183 * reading duplicate data in the next MDIC transaction.
184 */
185 if (hw->mac.type == e1000_pch2lan)
186 udelay(100);
187
188 return 0;
189}
190
191/**
192 * e1000e_write_phy_reg_mdic - Write MDI control register
193 * @hw: pointer to the HW structure
194 * @offset: register offset to write to
195 * @data: data to write to register at offset
196 *
197 * Writes data to MDI control register in the PHY at offset.
198 **/
199s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
200{
201 struct e1000_phy_info *phy = &hw->phy;
202 u32 i, mdic = 0;
203
204 if (offset > MAX_PHY_REG_ADDRESS) {
205 e_dbg("PHY Address %d is out of range\n", offset);
206 return -E1000_ERR_PARAM;
207 }
208
209 /* Set up Op-code, Phy Address, and register offset in the MDI
210 * Control register. The MAC will take care of interfacing with the
211 * PHY to retrieve the desired data.
212 */
213 mdic = (((u32)data) |
214 (offset << E1000_MDIC_REG_SHIFT) |
215 (phy->addr << E1000_MDIC_PHY_SHIFT) |
216 (E1000_MDIC_OP_WRITE));
217
218 ew32(MDIC, mdic);
219
220 /* Poll the ready bit to see if the MDI read completed
221 * Increasing the time out as testing showed failures with
222 * the lower time out
223 */
224 for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
225 udelay(50);
226 mdic = er32(MDIC);
227 if (mdic & E1000_MDIC_READY)
228 break;
229 }
230 if (!(mdic & E1000_MDIC_READY)) {
231 e_dbg("MDI Write did not complete\n");
232 return -E1000_ERR_PHY;
233 }
234 if (mdic & E1000_MDIC_ERROR) {
235 e_dbg("MDI Error\n");
236 return -E1000_ERR_PHY;
237 }
238 if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
239 e_dbg("MDI Write offset error - requested %d, returned %d\n",
240 offset,
241 (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
242 return -E1000_ERR_PHY;
243 }
244
245 /* Allow some time after each MDIC transaction to avoid
246 * reading duplicate data in the next MDIC transaction.
247 */
248 if (hw->mac.type == e1000_pch2lan)
249 udelay(100);
250
251 return 0;
252}
253
254/**
255 * e1000e_read_phy_reg_m88 - Read m88 PHY register
256 * @hw: pointer to the HW structure
257 * @offset: register offset to be read
258 * @data: pointer to the read data
259 *
260 * Acquires semaphore, if necessary, then reads the PHY register at offset
261 * and storing the retrieved information in data. Release any acquired
262 * semaphores before exiting.
263 **/
264s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
265{
266 s32 ret_val;
267
268 ret_val = hw->phy.ops.acquire(hw);
269 if (ret_val)
270 return ret_val;
271
272 ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
273 data);
274
275 hw->phy.ops.release(hw);
276
277 return ret_val;
278}
279
280/**
281 * e1000e_write_phy_reg_m88 - Write m88 PHY register
282 * @hw: pointer to the HW structure
283 * @offset: register offset to write to
284 * @data: data to write at register offset
285 *
286 * Acquires semaphore, if necessary, then writes the data to PHY register
287 * at the offset. Release any acquired semaphores before exiting.
288 **/
289s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
290{
291 s32 ret_val;
292
293 ret_val = hw->phy.ops.acquire(hw);
294 if (ret_val)
295 return ret_val;
296
297 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
298 data);
299
300 hw->phy.ops.release(hw);
301
302 return ret_val;
303}
304
305/**
306 * e1000_set_page_igp - Set page as on IGP-like PHY(s)
307 * @hw: pointer to the HW structure
308 * @page: page to set (shifted left when necessary)
309 *
310 * Sets PHY page required for PHY register access. Assumes semaphore is
311 * already acquired. Note, this function sets phy.addr to 1 so the caller
312 * must set it appropriately (if necessary) after this function returns.
313 **/
314s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page)
315{
316 e_dbg("Setting page 0x%x\n", page);
317
318 hw->phy.addr = 1;
319
320 return e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page);
321}
322
323/**
324 * __e1000e_read_phy_reg_igp - Read igp PHY register
325 * @hw: pointer to the HW structure
326 * @offset: register offset to be read
327 * @data: pointer to the read data
328 * @locked: semaphore has already been acquired or not
329 *
330 * Acquires semaphore, if necessary, then reads the PHY register at offset
331 * and stores the retrieved information in data. Release any acquired
332 * semaphores before exiting.
333 **/
334static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
335 bool locked)
336{
337 s32 ret_val = 0;
338
339 if (!locked) {
340 if (!hw->phy.ops.acquire)
341 return 0;
342
343 ret_val = hw->phy.ops.acquire(hw);
344 if (ret_val)
345 return ret_val;
346 }
347
348 if (offset > MAX_PHY_MULTI_PAGE_REG)
349 ret_val = e1000e_write_phy_reg_mdic(hw,
350 IGP01E1000_PHY_PAGE_SELECT,
351 (u16)offset);
352 if (!ret_val)
353 ret_val = e1000e_read_phy_reg_mdic(hw,
354 MAX_PHY_REG_ADDRESS & offset,
355 data);
356 if (!locked)
357 hw->phy.ops.release(hw);
358
359 return ret_val;
360}
361
362/**
363 * e1000e_read_phy_reg_igp - Read igp PHY register
364 * @hw: pointer to the HW structure
365 * @offset: register offset to be read
366 * @data: pointer to the read data
367 *
368 * Acquires semaphore then reads the PHY register at offset and stores the
369 * retrieved information in data.
370 * Release the acquired semaphore before exiting.
371 **/
372s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
373{
374 return __e1000e_read_phy_reg_igp(hw, offset, data, false);
375}
376
377/**
378 * e1000e_read_phy_reg_igp_locked - Read igp PHY register
379 * @hw: pointer to the HW structure
380 * @offset: register offset to be read
381 * @data: pointer to the read data
382 *
383 * Reads the PHY register at offset and stores the retrieved information
384 * in data. Assumes semaphore already acquired.
385 **/
386s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
387{
388 return __e1000e_read_phy_reg_igp(hw, offset, data, true);
389}
390
391/**
392 * e1000e_write_phy_reg_igp - Write igp PHY register
393 * @hw: pointer to the HW structure
394 * @offset: register offset to write to
395 * @data: data to write at register offset
396 * @locked: semaphore has already been acquired or not
397 *
398 * Acquires semaphore, if necessary, then writes the data to PHY register
399 * at the offset. Release any acquired semaphores before exiting.
400 **/
401static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
402 bool locked)
403{
404 s32 ret_val = 0;
405
406 if (!locked) {
407 if (!hw->phy.ops.acquire)
408 return 0;
409
410 ret_val = hw->phy.ops.acquire(hw);
411 if (ret_val)
412 return ret_val;
413 }
414
415 if (offset > MAX_PHY_MULTI_PAGE_REG)
416 ret_val = e1000e_write_phy_reg_mdic(hw,
417 IGP01E1000_PHY_PAGE_SELECT,
418 (u16)offset);
419 if (!ret_val)
420 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
421 offset, data);
422 if (!locked)
423 hw->phy.ops.release(hw);
424
425 return ret_val;
426}
427
428/**
429 * e1000e_write_phy_reg_igp - Write igp PHY register
430 * @hw: pointer to the HW structure
431 * @offset: register offset to write to
432 * @data: data to write at register offset
433 *
434 * Acquires semaphore then writes the data to PHY register
435 * at the offset. Release any acquired semaphores before exiting.
436 **/
437s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
438{
439 return __e1000e_write_phy_reg_igp(hw, offset, data, false);
440}
441
442/**
443 * e1000e_write_phy_reg_igp_locked - Write igp PHY register
444 * @hw: pointer to the HW structure
445 * @offset: register offset to write to
446 * @data: data to write at register offset
447 *
448 * Writes the data to PHY register at the offset.
449 * Assumes semaphore already acquired.
450 **/
451s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
452{
453 return __e1000e_write_phy_reg_igp(hw, offset, data, true);
454}
455
456/**
457 * __e1000_read_kmrn_reg - Read kumeran register
458 * @hw: pointer to the HW structure
459 * @offset: register offset to be read
460 * @data: pointer to the read data
461 * @locked: semaphore has already been acquired or not
462 *
463 * Acquires semaphore, if necessary. Then reads the PHY register at offset
464 * using the kumeran interface. The information retrieved is stored in data.
465 * Release any acquired semaphores before exiting.
466 **/
467static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
468 bool locked)
469{
470 u32 kmrnctrlsta;
471
472 if (!locked) {
473 s32 ret_val = 0;
474
475 if (!hw->phy.ops.acquire)
476 return 0;
477
478 ret_val = hw->phy.ops.acquire(hw);
479 if (ret_val)
480 return ret_val;
481 }
482
483 kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
484 E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
485 ew32(KMRNCTRLSTA, kmrnctrlsta);
486 e1e_flush();
487
488 udelay(2);
489
490 kmrnctrlsta = er32(KMRNCTRLSTA);
491 *data = (u16)kmrnctrlsta;
492
493 if (!locked)
494 hw->phy.ops.release(hw);
495
496 return 0;
497}
498
499/**
500 * e1000e_read_kmrn_reg - Read kumeran register
501 * @hw: pointer to the HW structure
502 * @offset: register offset to be read
503 * @data: pointer to the read data
504 *
505 * Acquires semaphore then reads the PHY register at offset using the
506 * kumeran interface. The information retrieved is stored in data.
507 * Release the acquired semaphore before exiting.
508 **/
509s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
510{
511 return __e1000_read_kmrn_reg(hw, offset, data, false);
512}
513
514/**
515 * e1000e_read_kmrn_reg_locked - Read kumeran register
516 * @hw: pointer to the HW structure
517 * @offset: register offset to be read
518 * @data: pointer to the read data
519 *
520 * Reads the PHY register at offset using the kumeran interface. The
521 * information retrieved is stored in data.
522 * Assumes semaphore already acquired.
523 **/
524s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
525{
526 return __e1000_read_kmrn_reg(hw, offset, data, true);
527}
528
529/**
530 * __e1000_write_kmrn_reg - Write kumeran register
531 * @hw: pointer to the HW structure
532 * @offset: register offset to write to
533 * @data: data to write at register offset
534 * @locked: semaphore has already been acquired or not
535 *
536 * Acquires semaphore, if necessary. Then write the data to PHY register
537 * at the offset using the kumeran interface. Release any acquired semaphores
538 * before exiting.
539 **/
540static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
541 bool locked)
542{
543 u32 kmrnctrlsta;
544
545 if (!locked) {
546 s32 ret_val = 0;
547
548 if (!hw->phy.ops.acquire)
549 return 0;
550
551 ret_val = hw->phy.ops.acquire(hw);
552 if (ret_val)
553 return ret_val;
554 }
555
556 kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
557 E1000_KMRNCTRLSTA_OFFSET) | data;
558 ew32(KMRNCTRLSTA, kmrnctrlsta);
559 e1e_flush();
560
561 udelay(2);
562
563 if (!locked)
564 hw->phy.ops.release(hw);
565
566 return 0;
567}
568
569/**
570 * e1000e_write_kmrn_reg - Write kumeran register
571 * @hw: pointer to the HW structure
572 * @offset: register offset to write to
573 * @data: data to write at register offset
574 *
575 * Acquires semaphore then writes the data to the PHY register at the offset
576 * using the kumeran interface. Release the acquired semaphore before exiting.
577 **/
578s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
579{
580 return __e1000_write_kmrn_reg(hw, offset, data, false);
581}
582
583/**
584 * e1000e_write_kmrn_reg_locked - Write kumeran register
585 * @hw: pointer to the HW structure
586 * @offset: register offset to write to
587 * @data: data to write at register offset
588 *
589 * Write the data to PHY register at the offset using the kumeran interface.
590 * Assumes semaphore already acquired.
591 **/
592s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
593{
594 return __e1000_write_kmrn_reg(hw, offset, data, true);
595}
596
597/**
598 * e1000_set_master_slave_mode - Setup PHY for Master/slave mode
599 * @hw: pointer to the HW structure
600 *
601 * Sets up Master/slave mode
602 **/
603static s32 e1000_set_master_slave_mode(struct e1000_hw *hw)
604{
605 s32 ret_val;
606 u16 phy_data;
607
608 /* Resolve Master/Slave mode */
609 ret_val = e1e_rphy(hw, MII_CTRL1000, &phy_data);
610 if (ret_val)
611 return ret_val;
612
613 /* load defaults for future use */
614 hw->phy.original_ms_type = (phy_data & CTL1000_ENABLE_MASTER) ?
615 ((phy_data & CTL1000_AS_MASTER) ?
616 e1000_ms_force_master : e1000_ms_force_slave) : e1000_ms_auto;
617
618 switch (hw->phy.ms_type) {
619 case e1000_ms_force_master:
620 phy_data |= (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
621 break;
622 case e1000_ms_force_slave:
623 phy_data |= CTL1000_ENABLE_MASTER;
624 phy_data &= ~(CTL1000_AS_MASTER);
625 break;
626 case e1000_ms_auto:
627 phy_data &= ~CTL1000_ENABLE_MASTER;
628 /* fall-through */
629 default:
630 break;
631 }
632
633 return e1e_wphy(hw, MII_CTRL1000, phy_data);
634}
635
636/**
637 * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
638 * @hw: pointer to the HW structure
639 *
640 * Sets up Carrier-sense on Transmit and downshift values.
641 **/
642s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
643{
644 s32 ret_val;
645 u16 phy_data;
646
647 /* Enable CRS on Tx. This must be set for half-duplex operation. */
648 ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
649 if (ret_val)
650 return ret_val;
651
652 phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
653
654 /* Enable downshift */
655 phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
656
657 ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
658 if (ret_val)
659 return ret_val;
660
661 /* Set MDI/MDIX mode */
662 ret_val = e1e_rphy(hw, I82577_PHY_CTRL_2, &phy_data);
663 if (ret_val)
664 return ret_val;
665 phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
666 /* Options:
667 * 0 - Auto (default)
668 * 1 - MDI mode
669 * 2 - MDI-X mode
670 */
671 switch (hw->phy.mdix) {
672 case 1:
673 break;
674 case 2:
675 phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
676 break;
677 case 0:
678 default:
679 phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
680 break;
681 }
682 ret_val = e1e_wphy(hw, I82577_PHY_CTRL_2, phy_data);
683 if (ret_val)
684 return ret_val;
685
686 return e1000_set_master_slave_mode(hw);
687}
688
689/**
690 * e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link
691 * @hw: pointer to the HW structure
692 *
693 * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
694 * and downshift values are set also.
695 **/
696s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
697{
698 struct e1000_phy_info *phy = &hw->phy;
699 s32 ret_val;
700 u16 phy_data;
701
702 /* Enable CRS on Tx. This must be set for half-duplex operation. */
703 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
704 if (ret_val)
705 return ret_val;
706
707 /* For BM PHY this bit is downshift enable */
708 if (phy->type != e1000_phy_bm)
709 phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
710
711 /* Options:
712 * MDI/MDI-X = 0 (default)
713 * 0 - Auto for all speeds
714 * 1 - MDI mode
715 * 2 - MDI-X mode
716 * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
717 */
718 phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
719
720 switch (phy->mdix) {
721 case 1:
722 phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
723 break;
724 case 2:
725 phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
726 break;
727 case 3:
728 phy_data |= M88E1000_PSCR_AUTO_X_1000T;
729 break;
730 case 0:
731 default:
732 phy_data |= M88E1000_PSCR_AUTO_X_MODE;
733 break;
734 }
735
736 /* Options:
737 * disable_polarity_correction = 0 (default)
738 * Automatic Correction for Reversed Cable Polarity
739 * 0 - Disabled
740 * 1 - Enabled
741 */
742 phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
743 if (phy->disable_polarity_correction)
744 phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
745
746 /* Enable downshift on BM (disabled by default) */
747 if (phy->type == e1000_phy_bm) {
748 /* For 82574/82583, first disable then enable downshift */
749 if (phy->id == BME1000_E_PHY_ID_R2) {
750 phy_data &= ~BME1000_PSCR_ENABLE_DOWNSHIFT;
751 ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL,
752 phy_data);
753 if (ret_val)
754 return ret_val;
755 /* Commit the changes. */
756 ret_val = phy->ops.commit(hw);
757 if (ret_val) {
758 e_dbg("Error committing the PHY changes\n");
759 return ret_val;
760 }
761 }
762
763 phy_data |= BME1000_PSCR_ENABLE_DOWNSHIFT;
764 }
765
766 ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
767 if (ret_val)
768 return ret_val;
769
770 if ((phy->type == e1000_phy_m88) &&
771 (phy->revision < E1000_REVISION_4) &&
772 (phy->id != BME1000_E_PHY_ID_R2)) {
773 /* Force TX_CLK in the Extended PHY Specific Control Register
774 * to 25MHz clock.
775 */
776 ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
777 if (ret_val)
778 return ret_val;
779
780 phy_data |= M88E1000_EPSCR_TX_CLK_25;
781
782 if ((phy->revision == 2) && (phy->id == M88E1111_I_PHY_ID)) {
783 /* 82573L PHY - set the downshift counter to 5x. */
784 phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
785 phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
786 } else {
787 /* Configure Master and Slave downshift values */
788 phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
789 M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
790 phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
791 M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
792 }
793 ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
794 if (ret_val)
795 return ret_val;
796 }
797
798 if ((phy->type == e1000_phy_bm) && (phy->id == BME1000_E_PHY_ID_R2)) {
799 /* Set PHY page 0, register 29 to 0x0003 */
800 ret_val = e1e_wphy(hw, 29, 0x0003);
801 if (ret_val)
802 return ret_val;
803
804 /* Set PHY page 0, register 30 to 0x0000 */
805 ret_val = e1e_wphy(hw, 30, 0x0000);
806 if (ret_val)
807 return ret_val;
808 }
809
810 /* Commit the changes. */
811 if (phy->ops.commit) {
812 ret_val = phy->ops.commit(hw);
813 if (ret_val) {
814 e_dbg("Error committing the PHY changes\n");
815 return ret_val;
816 }
817 }
818
819 if (phy->type == e1000_phy_82578) {
820 ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
821 if (ret_val)
822 return ret_val;
823
824 /* 82578 PHY - set the downshift count to 1x. */
825 phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
826 phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
827 ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
828 if (ret_val)
829 return ret_val;
830 }
831
832 return 0;
833}
834
835/**
836 * e1000e_copper_link_setup_igp - Setup igp PHY's for copper link
837 * @hw: pointer to the HW structure
838 *
839 * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
840 * igp PHY's.
841 **/
842s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
843{
844 struct e1000_phy_info *phy = &hw->phy;
845 s32 ret_val;
846 u16 data;
847
848 ret_val = e1000_phy_hw_reset(hw);
849 if (ret_val) {
850 e_dbg("Error resetting the PHY.\n");
851 return ret_val;
852 }
853
854 /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
855 * timeout issues when LFS is enabled.
856 */
857 msleep(100);
858
859 /* disable lplu d0 during driver init */
860 if (hw->phy.ops.set_d0_lplu_state) {
861 ret_val = hw->phy.ops.set_d0_lplu_state(hw, false);
862 if (ret_val) {
863 e_dbg("Error Disabling LPLU D0\n");
864 return ret_val;
865 }
866 }
867 /* Configure mdi-mdix settings */
868 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data);
869 if (ret_val)
870 return ret_val;
871
872 data &= ~IGP01E1000_PSCR_AUTO_MDIX;
873
874 switch (phy->mdix) {
875 case 1:
876 data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
877 break;
878 case 2:
879 data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
880 break;
881 case 0:
882 default:
883 data |= IGP01E1000_PSCR_AUTO_MDIX;
884 break;
885 }
886 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, data);
887 if (ret_val)
888 return ret_val;
889
890 /* set auto-master slave resolution settings */
891 if (hw->mac.autoneg) {
892 /* when autonegotiation advertisement is only 1000Mbps then we
893 * should disable SmartSpeed and enable Auto MasterSlave
894 * resolution as hardware default.
895 */
896 if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
897 /* Disable SmartSpeed */
898 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
899 &data);
900 if (ret_val)
901 return ret_val;
902
903 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
904 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
905 data);
906 if (ret_val)
907 return ret_val;
908
909 /* Set auto Master/Slave resolution process */
910 ret_val = e1e_rphy(hw, MII_CTRL1000, &data);
911 if (ret_val)
912 return ret_val;
913
914 data &= ~CTL1000_ENABLE_MASTER;
915 ret_val = e1e_wphy(hw, MII_CTRL1000, data);
916 if (ret_val)
917 return ret_val;
918 }
919
920 ret_val = e1000_set_master_slave_mode(hw);
921 }
922
923 return ret_val;
924}
925
926/**
927 * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation
928 * @hw: pointer to the HW structure
929 *
930 * Reads the MII auto-neg advertisement register and/or the 1000T control
931 * register and if the PHY is already setup for auto-negotiation, then
932 * return successful. Otherwise, setup advertisement and flow control to
933 * the appropriate values for the wanted auto-negotiation.
934 **/
935static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
936{
937 struct e1000_phy_info *phy = &hw->phy;
938 s32 ret_val;
939 u16 mii_autoneg_adv_reg;
940 u16 mii_1000t_ctrl_reg = 0;
941
942 phy->autoneg_advertised &= phy->autoneg_mask;
943
944 /* Read the MII Auto-Neg Advertisement Register (Address 4). */
945 ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_autoneg_adv_reg);
946 if (ret_val)
947 return ret_val;
948
949 if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
950 /* Read the MII 1000Base-T Control Register (Address 9). */
951 ret_val = e1e_rphy(hw, MII_CTRL1000, &mii_1000t_ctrl_reg);
952 if (ret_val)
953 return ret_val;
954 }
955
956 /* Need to parse both autoneg_advertised and fc and set up
957 * the appropriate PHY registers. First we will parse for
958 * autoneg_advertised software override. Since we can advertise
959 * a plethora of combinations, we need to check each bit
960 * individually.
961 */
962
963 /* First we clear all the 10/100 mb speed bits in the Auto-Neg
964 * Advertisement Register (Address 4) and the 1000 mb speed bits in
965 * the 1000Base-T Control Register (Address 9).
966 */
967 mii_autoneg_adv_reg &= ~(ADVERTISE_100FULL |
968 ADVERTISE_100HALF |
969 ADVERTISE_10FULL | ADVERTISE_10HALF);
970 mii_1000t_ctrl_reg &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
971
972 e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
973
974 /* Do we want to advertise 10 Mb Half Duplex? */
975 if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
976 e_dbg("Advertise 10mb Half duplex\n");
977 mii_autoneg_adv_reg |= ADVERTISE_10HALF;
978 }
979
980 /* Do we want to advertise 10 Mb Full Duplex? */
981 if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
982 e_dbg("Advertise 10mb Full duplex\n");
983 mii_autoneg_adv_reg |= ADVERTISE_10FULL;
984 }
985
986 /* Do we want to advertise 100 Mb Half Duplex? */
987 if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
988 e_dbg("Advertise 100mb Half duplex\n");
989 mii_autoneg_adv_reg |= ADVERTISE_100HALF;
990 }
991
992 /* Do we want to advertise 100 Mb Full Duplex? */
993 if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
994 e_dbg("Advertise 100mb Full duplex\n");
995 mii_autoneg_adv_reg |= ADVERTISE_100FULL;
996 }
997
998 /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
999 if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
1000 e_dbg("Advertise 1000mb Half duplex request denied!\n");
1001
1002 /* Do we want to advertise 1000 Mb Full Duplex? */
1003 if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
1004 e_dbg("Advertise 1000mb Full duplex\n");
1005 mii_1000t_ctrl_reg |= ADVERTISE_1000FULL;
1006 }
1007
1008 /* Check for a software override of the flow control settings, and
1009 * setup the PHY advertisement registers accordingly. If
1010 * auto-negotiation is enabled, then software will have to set the
1011 * "PAUSE" bits to the correct value in the Auto-Negotiation
1012 * Advertisement Register (MII_ADVERTISE) and re-start auto-
1013 * negotiation.
1014 *
1015 * The possible values of the "fc" parameter are:
1016 * 0: Flow control is completely disabled
1017 * 1: Rx flow control is enabled (we can receive pause frames
1018 * but not send pause frames).
1019 * 2: Tx flow control is enabled (we can send pause frames
1020 * but we do not support receiving pause frames).
1021 * 3: Both Rx and Tx flow control (symmetric) are enabled.
1022 * other: No software override. The flow control configuration
1023 * in the EEPROM is used.
1024 */
1025 switch (hw->fc.current_mode) {
1026 case e1000_fc_none:
1027 /* Flow control (Rx & Tx) is completely disabled by a
1028 * software over-ride.
1029 */
1030 mii_autoneg_adv_reg &=
1031 ~(ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
1032 break;
1033 case e1000_fc_rx_pause:
1034 /* Rx Flow control is enabled, and Tx Flow control is
1035 * disabled, by a software over-ride.
1036 *
1037 * Since there really isn't a way to advertise that we are
1038 * capable of Rx Pause ONLY, we will advertise that we
1039 * support both symmetric and asymmetric Rx PAUSE. Later
1040 * (in e1000e_config_fc_after_link_up) we will disable the
1041 * hw's ability to send PAUSE frames.
1042 */
1043 mii_autoneg_adv_reg |=
1044 (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
1045 break;
1046 case e1000_fc_tx_pause:
1047 /* Tx Flow control is enabled, and Rx Flow control is
1048 * disabled, by a software over-ride.
1049 */
1050 mii_autoneg_adv_reg |= ADVERTISE_PAUSE_ASYM;
1051 mii_autoneg_adv_reg &= ~ADVERTISE_PAUSE_CAP;
1052 break;
1053 case e1000_fc_full:
1054 /* Flow control (both Rx and Tx) is enabled by a software
1055 * over-ride.
1056 */
1057 mii_autoneg_adv_reg |=
1058 (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
1059 break;
1060 default:
1061 e_dbg("Flow control param set incorrectly\n");
1062 return -E1000_ERR_CONFIG;
1063 }
1064
1065 ret_val = e1e_wphy(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
1066 if (ret_val)
1067 return ret_val;
1068
1069 e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
1070
1071 if (phy->autoneg_mask & ADVERTISE_1000_FULL)
1072 ret_val = e1e_wphy(hw, MII_CTRL1000, mii_1000t_ctrl_reg);
1073
1074 return ret_val;
1075}
1076
1077/**
1078 * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link
1079 * @hw: pointer to the HW structure
1080 *
1081 * Performs initial bounds checking on autoneg advertisement parameter, then
1082 * configure to advertise the full capability. Setup the PHY to autoneg
1083 * and restart the negotiation process between the link partner. If
1084 * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
1085 **/
1086static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
1087{
1088 struct e1000_phy_info *phy = &hw->phy;
1089 s32 ret_val;
1090 u16 phy_ctrl;
1091
1092 /* Perform some bounds checking on the autoneg advertisement
1093 * parameter.
1094 */
1095 phy->autoneg_advertised &= phy->autoneg_mask;
1096
1097 /* If autoneg_advertised is zero, we assume it was not defaulted
1098 * by the calling code so we set to advertise full capability.
1099 */
1100 if (!phy->autoneg_advertised)
1101 phy->autoneg_advertised = phy->autoneg_mask;
1102
1103 e_dbg("Reconfiguring auto-neg advertisement params\n");
1104 ret_val = e1000_phy_setup_autoneg(hw);
1105 if (ret_val) {
1106 e_dbg("Error Setting up Auto-Negotiation\n");
1107 return ret_val;
1108 }
1109 e_dbg("Restarting Auto-Neg\n");
1110
1111 /* Restart auto-negotiation by setting the Auto Neg Enable bit and
1112 * the Auto Neg Restart bit in the PHY control register.
1113 */
1114 ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl);
1115 if (ret_val)
1116 return ret_val;
1117
1118 phy_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART);
1119 ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl);
1120 if (ret_val)
1121 return ret_val;
1122
1123 /* Does the user want to wait for Auto-Neg to complete here, or
1124 * check at a later time (for example, callback routine).
1125 */
1126 if (phy->autoneg_wait_to_complete) {
1127 ret_val = e1000_wait_autoneg(hw);
1128 if (ret_val) {
1129 e_dbg("Error while waiting for autoneg to complete\n");
1130 return ret_val;
1131 }
1132 }
1133
1134 hw->mac.get_link_status = true;
1135
1136 return ret_val;
1137}
1138
1139/**
1140 * e1000e_setup_copper_link - Configure copper link settings
1141 * @hw: pointer to the HW structure
1142 *
1143 * Calls the appropriate function to configure the link for auto-neg or forced
1144 * speed and duplex. Then we check for link, once link is established calls
1145 * to configure collision distance and flow control are called. If link is
1146 * not established, we return -E1000_ERR_PHY (-2).
1147 **/
1148s32 e1000e_setup_copper_link(struct e1000_hw *hw)
1149{
1150 s32 ret_val;
1151 bool link;
1152
1153 if (hw->mac.autoneg) {
1154 /* Setup autoneg and flow control advertisement and perform
1155 * autonegotiation.
1156 */
1157 ret_val = e1000_copper_link_autoneg(hw);
1158 if (ret_val)
1159 return ret_val;
1160 } else {
1161 /* PHY will be set to 10H, 10F, 100H or 100F
1162 * depending on user settings.
1163 */
1164 e_dbg("Forcing Speed and Duplex\n");
1165 ret_val = hw->phy.ops.force_speed_duplex(hw);
1166 if (ret_val) {
1167 e_dbg("Error Forcing Speed and Duplex\n");
1168 return ret_val;
1169 }
1170 }
1171
1172 /* Check link status. Wait up to 100 microseconds for link to become
1173 * valid.
1174 */
1175 ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
1176 &link);
1177 if (ret_val)
1178 return ret_val;
1179
1180 if (link) {
1181 e_dbg("Valid link established!!!\n");
1182 hw->mac.ops.config_collision_dist(hw);
1183 ret_val = e1000e_config_fc_after_link_up(hw);
1184 } else {
1185 e_dbg("Unable to establish link!!!\n");
1186 }
1187
1188 return ret_val;
1189}
1190
1191/**
1192 * e1000e_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
1193 * @hw: pointer to the HW structure
1194 *
1195 * Calls the PHY setup function to force speed and duplex. Clears the
1196 * auto-crossover to force MDI manually. Waits for link and returns
1197 * successful if link up is successful, else -E1000_ERR_PHY (-2).
1198 **/
1199s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
1200{
1201 struct e1000_phy_info *phy = &hw->phy;
1202 s32 ret_val;
1203 u16 phy_data;
1204 bool link;
1205
1206 ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
1207 if (ret_val)
1208 return ret_val;
1209
1210 e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
1211
1212 ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
1213 if (ret_val)
1214 return ret_val;
1215
1216 /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
1217 * forced whenever speed and duplex are forced.
1218 */
1219 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
1220 if (ret_val)
1221 return ret_val;
1222
1223 phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
1224 phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
1225
1226 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
1227 if (ret_val)
1228 return ret_val;
1229
1230 e_dbg("IGP PSCR: %X\n", phy_data);
1231
1232 udelay(1);
1233
1234 if (phy->autoneg_wait_to_complete) {
1235 e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
1236
1237 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1238 100000, &link);
1239 if (ret_val)
1240 return ret_val;
1241
1242 if (!link)
1243 e_dbg("Link taking longer than expected.\n");
1244
1245 /* Try once more */
1246 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1247 100000, &link);
1248 }
1249
1250 return ret_val;
1251}
1252
1253/**
1254 * e1000e_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
1255 * @hw: pointer to the HW structure
1256 *
1257 * Calls the PHY setup function to force speed and duplex. Clears the
1258 * auto-crossover to force MDI manually. Resets the PHY to commit the
1259 * changes. If time expires while waiting for link up, we reset the DSP.
1260 * After reset, TX_CLK and CRS on Tx must be set. Return successful upon
1261 * successful completion, else return corresponding error code.
1262 **/
1263s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
1264{
1265 struct e1000_phy_info *phy = &hw->phy;
1266 s32 ret_val;
1267 u16 phy_data;
1268 bool link;
1269
1270 /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
1271 * forced whenever speed and duplex are forced.
1272 */
1273 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
1274 if (ret_val)
1275 return ret_val;
1276
1277 phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
1278 ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
1279 if (ret_val)
1280 return ret_val;
1281
1282 e_dbg("M88E1000 PSCR: %X\n", phy_data);
1283
1284 ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
1285 if (ret_val)
1286 return ret_val;
1287
1288 e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
1289
1290 ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
1291 if (ret_val)
1292 return ret_val;
1293
1294 /* Reset the phy to commit changes. */
1295 if (hw->phy.ops.commit) {
1296 ret_val = hw->phy.ops.commit(hw);
1297 if (ret_val)
1298 return ret_val;
1299 }
1300
1301 if (phy->autoneg_wait_to_complete) {
1302 e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
1303
1304 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1305 100000, &link);
1306 if (ret_val)
1307 return ret_val;
1308
1309 if (!link) {
1310 if (hw->phy.type != e1000_phy_m88) {
1311 e_dbg("Link taking longer than expected.\n");
1312 } else {
1313 /* We didn't get link.
1314 * Reset the DSP and cross our fingers.
1315 */
1316 ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
1317 0x001d);
1318 if (ret_val)
1319 return ret_val;
1320 ret_val = e1000e_phy_reset_dsp(hw);
1321 if (ret_val)
1322 return ret_val;
1323 }
1324 }
1325
1326 /* Try once more */
1327 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1328 100000, &link);
1329 if (ret_val)
1330 return ret_val;
1331 }
1332
1333 if (hw->phy.type != e1000_phy_m88)
1334 return 0;
1335
1336 ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
1337 if (ret_val)
1338 return ret_val;
1339
1340 /* Resetting the phy means we need to re-force TX_CLK in the
1341 * Extended PHY Specific Control Register to 25MHz clock from
1342 * the reset value of 2.5MHz.
1343 */
1344 phy_data |= M88E1000_EPSCR_TX_CLK_25;
1345 ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
1346 if (ret_val)
1347 return ret_val;
1348
1349 /* In addition, we must re-enable CRS on Tx for both half and full
1350 * duplex.
1351 */
1352 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
1353 if (ret_val)
1354 return ret_val;
1355
1356 phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
1357 ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
1358
1359 return ret_val;
1360}
1361
1362/**
1363 * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
1364 * @hw: pointer to the HW structure
1365 *
1366 * Forces the speed and duplex settings of the PHY.
1367 * This is a function pointer entry point only called by
1368 * PHY setup routines.
1369 **/
1370s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
1371{
1372 struct e1000_phy_info *phy = &hw->phy;
1373 s32 ret_val;
1374 u16 data;
1375 bool link;
1376
1377 ret_val = e1e_rphy(hw, MII_BMCR, &data);
1378 if (ret_val)
1379 return ret_val;
1380
1381 e1000e_phy_force_speed_duplex_setup(hw, &data);
1382
1383 ret_val = e1e_wphy(hw, MII_BMCR, data);
1384 if (ret_val)
1385 return ret_val;
1386
1387 /* Disable MDI-X support for 10/100 */
1388 ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
1389 if (ret_val)
1390 return ret_val;
1391
1392 data &= ~IFE_PMC_AUTO_MDIX;
1393 data &= ~IFE_PMC_FORCE_MDIX;
1394
1395 ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
1396 if (ret_val)
1397 return ret_val;
1398
1399 e_dbg("IFE PMC: %X\n", data);
1400
1401 udelay(1);
1402
1403 if (phy->autoneg_wait_to_complete) {
1404 e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
1405
1406 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1407 100000, &link);
1408 if (ret_val)
1409 return ret_val;
1410
1411 if (!link)
1412 e_dbg("Link taking longer than expected.\n");
1413
1414 /* Try once more */
1415 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1416 100000, &link);
1417 if (ret_val)
1418 return ret_val;
1419 }
1420
1421 return 0;
1422}
1423
1424/**
1425 * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
1426 * @hw: pointer to the HW structure
1427 * @phy_ctrl: pointer to current value of MII_BMCR
1428 *
1429 * Forces speed and duplex on the PHY by doing the following: disable flow
1430 * control, force speed/duplex on the MAC, disable auto speed detection,
1431 * disable auto-negotiation, configure duplex, configure speed, configure
1432 * the collision distance, write configuration to CTRL register. The
1433 * caller must write to the MII_BMCR register for these settings to
1434 * take affect.
1435 **/
1436void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
1437{
1438 struct e1000_mac_info *mac = &hw->mac;
1439 u32 ctrl;
1440
1441 /* Turn off flow control when forcing speed/duplex */
1442 hw->fc.current_mode = e1000_fc_none;
1443
1444 /* Force speed/duplex on the mac */
1445 ctrl = er32(CTRL);
1446 ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
1447 ctrl &= ~E1000_CTRL_SPD_SEL;
1448
1449 /* Disable Auto Speed Detection */
1450 ctrl &= ~E1000_CTRL_ASDE;
1451
1452 /* Disable autoneg on the phy */
1453 *phy_ctrl &= ~BMCR_ANENABLE;
1454
1455 /* Forcing Full or Half Duplex? */
1456 if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
1457 ctrl &= ~E1000_CTRL_FD;
1458 *phy_ctrl &= ~BMCR_FULLDPLX;
1459 e_dbg("Half Duplex\n");
1460 } else {
1461 ctrl |= E1000_CTRL_FD;
1462 *phy_ctrl |= BMCR_FULLDPLX;
1463 e_dbg("Full Duplex\n");
1464 }
1465
1466 /* Forcing 10mb or 100mb? */
1467 if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
1468 ctrl |= E1000_CTRL_SPD_100;
1469 *phy_ctrl |= BMCR_SPEED100;
1470 *phy_ctrl &= ~BMCR_SPEED1000;
1471 e_dbg("Forcing 100mb\n");
1472 } else {
1473 ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
1474 *phy_ctrl &= ~(BMCR_SPEED1000 | BMCR_SPEED100);
1475 e_dbg("Forcing 10mb\n");
1476 }
1477
1478 hw->mac.ops.config_collision_dist(hw);
1479
1480 ew32(CTRL, ctrl);
1481}
1482
1483/**
1484 * e1000e_set_d3_lplu_state - Sets low power link up state for D3
1485 * @hw: pointer to the HW structure
1486 * @active: boolean used to enable/disable lplu
1487 *
1488 * Success returns 0, Failure returns 1
1489 *
1490 * The low power link up (lplu) state is set to the power management level D3
1491 * and SmartSpeed is disabled when active is true, else clear lplu for D3
1492 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
1493 * is used during Dx states where the power conservation is most important.
1494 * During driver activity, SmartSpeed should be enabled so performance is
1495 * maintained.
1496 **/
1497s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
1498{
1499 struct e1000_phy_info *phy = &hw->phy;
1500 s32 ret_val;
1501 u16 data;
1502
1503 ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
1504 if (ret_val)
1505 return ret_val;
1506
1507 if (!active) {
1508 data &= ~IGP02E1000_PM_D3_LPLU;
1509 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
1510 if (ret_val)
1511 return ret_val;
1512 /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
1513 * during Dx states where the power conservation is most
1514 * important. During driver activity we should enable
1515 * SmartSpeed, so performance is maintained.
1516 */
1517 if (phy->smart_speed == e1000_smart_speed_on) {
1518 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
1519 &data);
1520 if (ret_val)
1521 return ret_val;
1522
1523 data |= IGP01E1000_PSCFR_SMART_SPEED;
1524 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
1525 data);
1526 if (ret_val)
1527 return ret_val;
1528 } else if (phy->smart_speed == e1000_smart_speed_off) {
1529 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
1530 &data);
1531 if (ret_val)
1532 return ret_val;
1533
1534 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
1535 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
1536 data);
1537 if (ret_val)
1538 return ret_val;
1539 }
1540 } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
1541 (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
1542 (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
1543 data |= IGP02E1000_PM_D3_LPLU;
1544 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
1545 if (ret_val)
1546 return ret_val;
1547
1548 /* When LPLU is enabled, we should disable SmartSpeed */
1549 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
1550 if (ret_val)
1551 return ret_val;
1552
1553 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
1554 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
1555 }
1556
1557 return ret_val;
1558}
1559
1560/**
1561 * e1000e_check_downshift - Checks whether a downshift in speed occurred
1562 * @hw: pointer to the HW structure
1563 *
1564 * Success returns 0, Failure returns 1
1565 *
1566 * A downshift is detected by querying the PHY link health.
1567 **/
1568s32 e1000e_check_downshift(struct e1000_hw *hw)
1569{
1570 struct e1000_phy_info *phy = &hw->phy;
1571 s32 ret_val;
1572 u16 phy_data, offset, mask;
1573
1574 switch (phy->type) {
1575 case e1000_phy_m88:
1576 case e1000_phy_gg82563:
1577 case e1000_phy_bm:
1578 case e1000_phy_82578:
1579 offset = M88E1000_PHY_SPEC_STATUS;
1580 mask = M88E1000_PSSR_DOWNSHIFT;
1581 break;
1582 case e1000_phy_igp_2:
1583 case e1000_phy_igp_3:
1584 offset = IGP01E1000_PHY_LINK_HEALTH;
1585 mask = IGP01E1000_PLHR_SS_DOWNGRADE;
1586 break;
1587 default:
1588 /* speed downshift not supported */
1589 phy->speed_downgraded = false;
1590 return 0;
1591 }
1592
1593 ret_val = e1e_rphy(hw, offset, &phy_data);
1594
1595 if (!ret_val)
1596 phy->speed_downgraded = !!(phy_data & mask);
1597
1598 return ret_val;
1599}
1600
1601/**
1602 * e1000_check_polarity_m88 - Checks the polarity.
1603 * @hw: pointer to the HW structure
1604 *
1605 * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
1606 *
1607 * Polarity is determined based on the PHY specific status register.
1608 **/
1609s32 e1000_check_polarity_m88(struct e1000_hw *hw)
1610{
1611 struct e1000_phy_info *phy = &hw->phy;
1612 s32 ret_val;
1613 u16 data;
1614
1615 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &data);
1616
1617 if (!ret_val)
1618 phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY)
1619 ? e1000_rev_polarity_reversed
1620 : e1000_rev_polarity_normal);
1621
1622 return ret_val;
1623}
1624
1625/**
1626 * e1000_check_polarity_igp - Checks the polarity.
1627 * @hw: pointer to the HW structure
1628 *
1629 * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
1630 *
1631 * Polarity is determined based on the PHY port status register, and the
1632 * current speed (since there is no polarity at 100Mbps).
1633 **/
1634s32 e1000_check_polarity_igp(struct e1000_hw *hw)
1635{
1636 struct e1000_phy_info *phy = &hw->phy;
1637 s32 ret_val;
1638 u16 data, offset, mask;
1639
1640 /* Polarity is determined based on the speed of
1641 * our connection.
1642 */
1643 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
1644 if (ret_val)
1645 return ret_val;
1646
1647 if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
1648 IGP01E1000_PSSR_SPEED_1000MBPS) {
1649 offset = IGP01E1000_PHY_PCS_INIT_REG;
1650 mask = IGP01E1000_PHY_POLARITY_MASK;
1651 } else {
1652 /* This really only applies to 10Mbps since
1653 * there is no polarity for 100Mbps (always 0).
1654 */
1655 offset = IGP01E1000_PHY_PORT_STATUS;
1656 mask = IGP01E1000_PSSR_POLARITY_REVERSED;
1657 }
1658
1659 ret_val = e1e_rphy(hw, offset, &data);
1660
1661 if (!ret_val)
1662 phy->cable_polarity = ((data & mask)
1663 ? e1000_rev_polarity_reversed
1664 : e1000_rev_polarity_normal);
1665
1666 return ret_val;
1667}
1668
1669/**
1670 * e1000_check_polarity_ife - Check cable polarity for IFE PHY
1671 * @hw: pointer to the HW structure
1672 *
1673 * Polarity is determined on the polarity reversal feature being enabled.
1674 **/
1675s32 e1000_check_polarity_ife(struct e1000_hw *hw)
1676{
1677 struct e1000_phy_info *phy = &hw->phy;
1678 s32 ret_val;
1679 u16 phy_data, offset, mask;
1680
1681 /* Polarity is determined based on the reversal feature being enabled.
1682 */
1683 if (phy->polarity_correction) {
1684 offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
1685 mask = IFE_PESC_POLARITY_REVERSED;
1686 } else {
1687 offset = IFE_PHY_SPECIAL_CONTROL;
1688 mask = IFE_PSC_FORCE_POLARITY;
1689 }
1690
1691 ret_val = e1e_rphy(hw, offset, &phy_data);
1692
1693 if (!ret_val)
1694 phy->cable_polarity = ((phy_data & mask)
1695 ? e1000_rev_polarity_reversed
1696 : e1000_rev_polarity_normal);
1697
1698 return ret_val;
1699}
1700
1701/**
1702 * e1000_wait_autoneg - Wait for auto-neg completion
1703 * @hw: pointer to the HW structure
1704 *
1705 * Waits for auto-negotiation to complete or for the auto-negotiation time
1706 * limit to expire, which ever happens first.
1707 **/
1708static s32 e1000_wait_autoneg(struct e1000_hw *hw)
1709{
1710 s32 ret_val = 0;
1711 u16 i, phy_status;
1712
1713 /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
1714 for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
1715 ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
1716 if (ret_val)
1717 break;
1718 ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
1719 if (ret_val)
1720 break;
1721 if (phy_status & BMSR_ANEGCOMPLETE)
1722 break;
1723 msleep(100);
1724 }
1725
1726 /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
1727 * has completed.
1728 */
1729 return ret_val;
1730}
1731
1732/**
1733 * e1000e_phy_has_link_generic - Polls PHY for link
1734 * @hw: pointer to the HW structure
1735 * @iterations: number of times to poll for link
1736 * @usec_interval: delay between polling attempts
1737 * @success: pointer to whether polling was successful or not
1738 *
1739 * Polls the PHY status register for link, 'iterations' number of times.
1740 **/
1741s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
1742 u32 usec_interval, bool *success)
1743{
1744 s32 ret_val = 0;
1745 u16 i, phy_status;
1746
1747 for (i = 0; i < iterations; i++) {
1748 /* Some PHYs require the MII_BMSR register to be read
1749 * twice due to the link bit being sticky. No harm doing
1750 * it across the board.
1751 */
1752 ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
1753 if (ret_val) {
1754 /* If the first read fails, another entity may have
1755 * ownership of the resources, wait and try again to
1756 * see if they have relinquished the resources yet.
1757 */
1758 if (usec_interval >= 1000)
1759 msleep(usec_interval / 1000);
1760 else
1761 udelay(usec_interval);
1762 }
1763 ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
1764 if (ret_val)
1765 break;
1766 if (phy_status & BMSR_LSTATUS)
1767 break;
1768 if (usec_interval >= 1000)
1769 msleep(usec_interval / 1000);
1770 else
1771 udelay(usec_interval);
1772 }
1773
1774 *success = (i < iterations);
1775
1776 return ret_val;
1777}
1778
1779/**
1780 * e1000e_get_cable_length_m88 - Determine cable length for m88 PHY
1781 * @hw: pointer to the HW structure
1782 *
1783 * Reads the PHY specific status register to retrieve the cable length
1784 * information. The cable length is determined by averaging the minimum and
1785 * maximum values to get the "average" cable length. The m88 PHY has four
1786 * possible cable length values, which are:
1787 * Register Value Cable Length
1788 * 0 < 50 meters
1789 * 1 50 - 80 meters
1790 * 2 80 - 110 meters
1791 * 3 110 - 140 meters
1792 * 4 > 140 meters
1793 **/
1794s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
1795{
1796 struct e1000_phy_info *phy = &hw->phy;
1797 s32 ret_val;
1798 u16 phy_data, index;
1799
1800 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
1801 if (ret_val)
1802 return ret_val;
1803
1804 index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
1805 M88E1000_PSSR_CABLE_LENGTH_SHIFT);
1806
1807 if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
1808 return -E1000_ERR_PHY;
1809
1810 phy->min_cable_length = e1000_m88_cable_length_table[index];
1811 phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
1812
1813 phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
1814
1815 return 0;
1816}
1817
1818/**
1819 * e1000e_get_cable_length_igp_2 - Determine cable length for igp2 PHY
1820 * @hw: pointer to the HW structure
1821 *
1822 * The automatic gain control (agc) normalizes the amplitude of the
1823 * received signal, adjusting for the attenuation produced by the
1824 * cable. By reading the AGC registers, which represent the
1825 * combination of coarse and fine gain value, the value can be put
1826 * into a lookup table to obtain the approximate cable length
1827 * for each channel.
1828 **/
1829s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
1830{
1831 struct e1000_phy_info *phy = &hw->phy;
1832 s32 ret_val;
1833 u16 phy_data, i, agc_value = 0;
1834 u16 cur_agc_index, max_agc_index = 0;
1835 u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
1836 static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
1837 IGP02E1000_PHY_AGC_A,
1838 IGP02E1000_PHY_AGC_B,
1839 IGP02E1000_PHY_AGC_C,
1840 IGP02E1000_PHY_AGC_D
1841 };
1842
1843 /* Read the AGC registers for all channels */
1844 for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
1845 ret_val = e1e_rphy(hw, agc_reg_array[i], &phy_data);
1846 if (ret_val)
1847 return ret_val;
1848
1849 /* Getting bits 15:9, which represent the combination of
1850 * coarse and fine gain values. The result is a number
1851 * that can be put into the lookup table to obtain the
1852 * approximate cable length.
1853 */
1854 cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
1855 IGP02E1000_AGC_LENGTH_MASK);
1856
1857 /* Array index bound check. */
1858 if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
1859 (cur_agc_index == 0))
1860 return -E1000_ERR_PHY;
1861
1862 /* Remove min & max AGC values from calculation. */
1863 if (e1000_igp_2_cable_length_table[min_agc_index] >
1864 e1000_igp_2_cable_length_table[cur_agc_index])
1865 min_agc_index = cur_agc_index;
1866 if (e1000_igp_2_cable_length_table[max_agc_index] <
1867 e1000_igp_2_cable_length_table[cur_agc_index])
1868 max_agc_index = cur_agc_index;
1869
1870 agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
1871 }
1872
1873 agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
1874 e1000_igp_2_cable_length_table[max_agc_index]);
1875 agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
1876
1877 /* Calculate cable length with the error range of +/- 10 meters. */
1878 phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
1879 (agc_value - IGP02E1000_AGC_RANGE) : 0);
1880 phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
1881
1882 phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
1883
1884 return 0;
1885}
1886
1887/**
1888 * e1000e_get_phy_info_m88 - Retrieve PHY information
1889 * @hw: pointer to the HW structure
1890 *
1891 * Valid for only copper links. Read the PHY status register (sticky read)
1892 * to verify that link is up. Read the PHY special control register to
1893 * determine the polarity and 10base-T extended distance. Read the PHY
1894 * special status register to determine MDI/MDIx and current speed. If
1895 * speed is 1000, then determine cable length, local and remote receiver.
1896 **/
1897s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
1898{
1899 struct e1000_phy_info *phy = &hw->phy;
1900 s32 ret_val;
1901 u16 phy_data;
1902 bool link;
1903
1904 if (phy->media_type != e1000_media_type_copper) {
1905 e_dbg("Phy info is only valid for copper media\n");
1906 return -E1000_ERR_CONFIG;
1907 }
1908
1909 ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
1910 if (ret_val)
1911 return ret_val;
1912
1913 if (!link) {
1914 e_dbg("Phy info is only valid if link is up\n");
1915 return -E1000_ERR_CONFIG;
1916 }
1917
1918 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
1919 if (ret_val)
1920 return ret_val;
1921
1922 phy->polarity_correction = !!(phy_data &
1923 M88E1000_PSCR_POLARITY_REVERSAL);
1924
1925 ret_val = e1000_check_polarity_m88(hw);
1926 if (ret_val)
1927 return ret_val;
1928
1929 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
1930 if (ret_val)
1931 return ret_val;
1932
1933 phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX);
1934
1935 if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
1936 ret_val = hw->phy.ops.get_cable_length(hw);
1937 if (ret_val)
1938 return ret_val;
1939
1940 ret_val = e1e_rphy(hw, MII_STAT1000, &phy_data);
1941 if (ret_val)
1942 return ret_val;
1943
1944 phy->local_rx = (phy_data & LPA_1000LOCALRXOK)
1945 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
1946
1947 phy->remote_rx = (phy_data & LPA_1000REMRXOK)
1948 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
1949 } else {
1950 /* Set values to "undefined" */
1951 phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
1952 phy->local_rx = e1000_1000t_rx_status_undefined;
1953 phy->remote_rx = e1000_1000t_rx_status_undefined;
1954 }
1955
1956 return ret_val;
1957}
1958
1959/**
1960 * e1000e_get_phy_info_igp - Retrieve igp PHY information
1961 * @hw: pointer to the HW structure
1962 *
1963 * Read PHY status to determine if link is up. If link is up, then
1964 * set/determine 10base-T extended distance and polarity correction. Read
1965 * PHY port status to determine MDI/MDIx and speed. Based on the speed,
1966 * determine on the cable length, local and remote receiver.
1967 **/
1968s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
1969{
1970 struct e1000_phy_info *phy = &hw->phy;
1971 s32 ret_val;
1972 u16 data;
1973 bool link;
1974
1975 ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
1976 if (ret_val)
1977 return ret_val;
1978
1979 if (!link) {
1980 e_dbg("Phy info is only valid if link is up\n");
1981 return -E1000_ERR_CONFIG;
1982 }
1983
1984 phy->polarity_correction = true;
1985
1986 ret_val = e1000_check_polarity_igp(hw);
1987 if (ret_val)
1988 return ret_val;
1989
1990 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
1991 if (ret_val)
1992 return ret_val;
1993
1994 phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX);
1995
1996 if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
1997 IGP01E1000_PSSR_SPEED_1000MBPS) {
1998 ret_val = phy->ops.get_cable_length(hw);
1999 if (ret_val)
2000 return ret_val;
2001
2002 ret_val = e1e_rphy(hw, MII_STAT1000, &data);
2003 if (ret_val)
2004 return ret_val;
2005
2006 phy->local_rx = (data & LPA_1000LOCALRXOK)
2007 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
2008
2009 phy->remote_rx = (data & LPA_1000REMRXOK)
2010 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
2011 } else {
2012 phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
2013 phy->local_rx = e1000_1000t_rx_status_undefined;
2014 phy->remote_rx = e1000_1000t_rx_status_undefined;
2015 }
2016
2017 return ret_val;
2018}
2019
2020/**
2021 * e1000_get_phy_info_ife - Retrieves various IFE PHY states
2022 * @hw: pointer to the HW structure
2023 *
2024 * Populates "phy" structure with various feature states.
2025 **/
2026s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
2027{
2028 struct e1000_phy_info *phy = &hw->phy;
2029 s32 ret_val;
2030 u16 data;
2031 bool link;
2032
2033 ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
2034 if (ret_val)
2035 return ret_val;
2036
2037 if (!link) {
2038 e_dbg("Phy info is only valid if link is up\n");
2039 return -E1000_ERR_CONFIG;
2040 }
2041
2042 ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
2043 if (ret_val)
2044 return ret_val;
2045 phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE);
2046
2047 if (phy->polarity_correction) {
2048 ret_val = e1000_check_polarity_ife(hw);
2049 if (ret_val)
2050 return ret_val;
2051 } else {
2052 /* Polarity is forced */
2053 phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY)
2054 ? e1000_rev_polarity_reversed
2055 : e1000_rev_polarity_normal);
2056 }
2057
2058 ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
2059 if (ret_val)
2060 return ret_val;
2061
2062 phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS);
2063
2064 /* The following parameters are undefined for 10/100 operation. */
2065 phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
2066 phy->local_rx = e1000_1000t_rx_status_undefined;
2067 phy->remote_rx = e1000_1000t_rx_status_undefined;
2068
2069 return 0;
2070}
2071
2072/**
2073 * e1000e_phy_sw_reset - PHY software reset
2074 * @hw: pointer to the HW structure
2075 *
2076 * Does a software reset of the PHY by reading the PHY control register and
2077 * setting/write the control register reset bit to the PHY.
2078 **/
2079s32 e1000e_phy_sw_reset(struct e1000_hw *hw)
2080{
2081 s32 ret_val;
2082 u16 phy_ctrl;
2083
2084 ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl);
2085 if (ret_val)
2086 return ret_val;
2087
2088 phy_ctrl |= BMCR_RESET;
2089 ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl);
2090 if (ret_val)
2091 return ret_val;
2092
2093 udelay(1);
2094
2095 return ret_val;
2096}
2097
2098/**
2099 * e1000e_phy_hw_reset_generic - PHY hardware reset
2100 * @hw: pointer to the HW structure
2101 *
2102 * Verify the reset block is not blocking us from resetting. Acquire
2103 * semaphore (if necessary) and read/set/write the device control reset
2104 * bit in the PHY. Wait the appropriate delay time for the device to
2105 * reset and release the semaphore (if necessary).
2106 **/
2107s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
2108{
2109 struct e1000_phy_info *phy = &hw->phy;
2110 s32 ret_val;
2111 u32 ctrl;
2112
2113 if (phy->ops.check_reset_block) {
2114 ret_val = phy->ops.check_reset_block(hw);
2115 if (ret_val)
2116 return 0;
2117 }
2118
2119 ret_val = phy->ops.acquire(hw);
2120 if (ret_val)
2121 return ret_val;
2122
2123 ctrl = er32(CTRL);
2124 ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
2125 e1e_flush();
2126
2127 udelay(phy->reset_delay_us);
2128
2129 ew32(CTRL, ctrl);
2130 e1e_flush();
2131
2132 usleep_range(150, 300);
2133
2134 phy->ops.release(hw);
2135
2136 return phy->ops.get_cfg_done(hw);
2137}
2138
2139/**
2140 * e1000e_get_cfg_done_generic - Generic configuration done
2141 * @hw: pointer to the HW structure
2142 *
2143 * Generic function to wait 10 milli-seconds for configuration to complete
2144 * and return success.
2145 **/
2146s32 e1000e_get_cfg_done_generic(struct e1000_hw __always_unused *hw)
2147{
2148 mdelay(10);
2149
2150 return 0;
2151}
2152
2153/**
2154 * e1000e_phy_init_script_igp3 - Inits the IGP3 PHY
2155 * @hw: pointer to the HW structure
2156 *
2157 * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
2158 **/
2159s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
2160{
2161 e_dbg("Running IGP 3 PHY init script\n");
2162
2163 /* PHY init IGP 3 */
2164 /* Enable rise/fall, 10-mode work in class-A */
2165 e1e_wphy(hw, 0x2F5B, 0x9018);
2166 /* Remove all caps from Replica path filter */
2167 e1e_wphy(hw, 0x2F52, 0x0000);
2168 /* Bias trimming for ADC, AFE and Driver (Default) */
2169 e1e_wphy(hw, 0x2FB1, 0x8B24);
2170 /* Increase Hybrid poly bias */
2171 e1e_wphy(hw, 0x2FB2, 0xF8F0);
2172 /* Add 4% to Tx amplitude in Gig mode */
2173 e1e_wphy(hw, 0x2010, 0x10B0);
2174 /* Disable trimming (TTT) */
2175 e1e_wphy(hw, 0x2011, 0x0000);
2176 /* Poly DC correction to 94.6% + 2% for all channels */
2177 e1e_wphy(hw, 0x20DD, 0x249A);
2178 /* ABS DC correction to 95.9% */
2179 e1e_wphy(hw, 0x20DE, 0x00D3);
2180 /* BG temp curve trim */
2181 e1e_wphy(hw, 0x28B4, 0x04CE);
2182 /* Increasing ADC OPAMP stage 1 currents to max */
2183 e1e_wphy(hw, 0x2F70, 0x29E4);
2184 /* Force 1000 ( required for enabling PHY regs configuration) */
2185 e1e_wphy(hw, 0x0000, 0x0140);
2186 /* Set upd_freq to 6 */
2187 e1e_wphy(hw, 0x1F30, 0x1606);
2188 /* Disable NPDFE */
2189 e1e_wphy(hw, 0x1F31, 0xB814);
2190 /* Disable adaptive fixed FFE (Default) */
2191 e1e_wphy(hw, 0x1F35, 0x002A);
2192 /* Enable FFE hysteresis */
2193 e1e_wphy(hw, 0x1F3E, 0x0067);
2194 /* Fixed FFE for short cable lengths */
2195 e1e_wphy(hw, 0x1F54, 0x0065);
2196 /* Fixed FFE for medium cable lengths */
2197 e1e_wphy(hw, 0x1F55, 0x002A);
2198 /* Fixed FFE for long cable lengths */
2199 e1e_wphy(hw, 0x1F56, 0x002A);
2200 /* Enable Adaptive Clip Threshold */
2201 e1e_wphy(hw, 0x1F72, 0x3FB0);
2202 /* AHT reset limit to 1 */
2203 e1e_wphy(hw, 0x1F76, 0xC0FF);
2204 /* Set AHT master delay to 127 msec */
2205 e1e_wphy(hw, 0x1F77, 0x1DEC);
2206 /* Set scan bits for AHT */
2207 e1e_wphy(hw, 0x1F78, 0xF9EF);
2208 /* Set AHT Preset bits */
2209 e1e_wphy(hw, 0x1F79, 0x0210);
2210 /* Change integ_factor of channel A to 3 */
2211 e1e_wphy(hw, 0x1895, 0x0003);
2212 /* Change prop_factor of channels BCD to 8 */
2213 e1e_wphy(hw, 0x1796, 0x0008);
2214 /* Change cg_icount + enable integbp for channels BCD */
2215 e1e_wphy(hw, 0x1798, 0xD008);
2216 /* Change cg_icount + enable integbp + change prop_factor_master
2217 * to 8 for channel A
2218 */
2219 e1e_wphy(hw, 0x1898, 0xD918);
2220 /* Disable AHT in Slave mode on channel A */
2221 e1e_wphy(hw, 0x187A, 0x0800);
2222 /* Enable LPLU and disable AN to 1000 in non-D0a states,
2223 * Enable SPD+B2B
2224 */
2225 e1e_wphy(hw, 0x0019, 0x008D);
2226 /* Enable restart AN on an1000_dis change */
2227 e1e_wphy(hw, 0x001B, 0x2080);
2228 /* Enable wh_fifo read clock in 10/100 modes */
2229 e1e_wphy(hw, 0x0014, 0x0045);
2230 /* Restart AN, Speed selection is 1000 */
2231 e1e_wphy(hw, 0x0000, 0x1340);
2232
2233 return 0;
2234}
2235
2236/**
2237 * e1000e_get_phy_type_from_id - Get PHY type from id
2238 * @phy_id: phy_id read from the phy
2239 *
2240 * Returns the phy type from the id.
2241 **/
2242enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
2243{
2244 enum e1000_phy_type phy_type = e1000_phy_unknown;
2245
2246 switch (phy_id) {
2247 case M88E1000_I_PHY_ID:
2248 case M88E1000_E_PHY_ID:
2249 case M88E1111_I_PHY_ID:
2250 case M88E1011_I_PHY_ID:
2251 phy_type = e1000_phy_m88;
2252 break;
2253 case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */
2254 phy_type = e1000_phy_igp_2;
2255 break;
2256 case GG82563_E_PHY_ID:
2257 phy_type = e1000_phy_gg82563;
2258 break;
2259 case IGP03E1000_E_PHY_ID:
2260 phy_type = e1000_phy_igp_3;
2261 break;
2262 case IFE_E_PHY_ID:
2263 case IFE_PLUS_E_PHY_ID:
2264 case IFE_C_E_PHY_ID:
2265 phy_type = e1000_phy_ife;
2266 break;
2267 case BME1000_E_PHY_ID:
2268 case BME1000_E_PHY_ID_R2:
2269 phy_type = e1000_phy_bm;
2270 break;
2271 case I82578_E_PHY_ID:
2272 phy_type = e1000_phy_82578;
2273 break;
2274 case I82577_E_PHY_ID:
2275 phy_type = e1000_phy_82577;
2276 break;
2277 case I82579_E_PHY_ID:
2278 phy_type = e1000_phy_82579;
2279 break;
2280 case I217_E_PHY_ID:
2281 phy_type = e1000_phy_i217;
2282 break;
2283 default:
2284 phy_type = e1000_phy_unknown;
2285 break;
2286 }
2287 return phy_type;
2288}
2289
2290/**
2291 * e1000e_determine_phy_address - Determines PHY address.
2292 * @hw: pointer to the HW structure
2293 *
2294 * This uses a trial and error method to loop through possible PHY
2295 * addresses. It tests each by reading the PHY ID registers and
2296 * checking for a match.
2297 **/
2298s32 e1000e_determine_phy_address(struct e1000_hw *hw)
2299{
2300 u32 phy_addr = 0;
2301 u32 i;
2302 enum e1000_phy_type phy_type = e1000_phy_unknown;
2303
2304 hw->phy.id = phy_type;
2305
2306 for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
2307 hw->phy.addr = phy_addr;
2308 i = 0;
2309
2310 do {
2311 e1000e_get_phy_id(hw);
2312 phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
2313
2314 /* If phy_type is valid, break - we found our
2315 * PHY address
2316 */
2317 if (phy_type != e1000_phy_unknown)
2318 return 0;
2319
2320 usleep_range(1000, 2000);
2321 i++;
2322 } while (i < 10);
2323 }
2324
2325 return -E1000_ERR_PHY_TYPE;
2326}
2327
2328/**
2329 * e1000_get_phy_addr_for_bm_page - Retrieve PHY page address
2330 * @page: page to access
2331 *
2332 * Returns the phy address for the page requested.
2333 **/
2334static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg)
2335{
2336 u32 phy_addr = 2;
2337
2338 if ((page >= 768) || (page == 0 && reg == 25) || (reg == 31))
2339 phy_addr = 1;
2340
2341 return phy_addr;
2342}
2343
2344/**
2345 * e1000e_write_phy_reg_bm - Write BM PHY register
2346 * @hw: pointer to the HW structure
2347 * @offset: register offset to write to
2348 * @data: data to write at register offset
2349 *
2350 * Acquires semaphore, if necessary, then writes the data to PHY register
2351 * at the offset. Release any acquired semaphores before exiting.
2352 **/
2353s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
2354{
2355 s32 ret_val;
2356 u32 page = offset >> IGP_PAGE_SHIFT;
2357
2358 ret_val = hw->phy.ops.acquire(hw);
2359 if (ret_val)
2360 return ret_val;
2361
2362 /* Page 800 works differently than the rest so it has its own func */
2363 if (page == BM_WUC_PAGE) {
2364 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
2365 false, false);
2366 goto release;
2367 }
2368
2369 hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
2370
2371 if (offset > MAX_PHY_MULTI_PAGE_REG) {
2372 u32 page_shift, page_select;
2373
2374 /* Page select is register 31 for phy address 1 and 22 for
2375 * phy address 2 and 3. Page select is shifted only for
2376 * phy address 1.
2377 */
2378 if (hw->phy.addr == 1) {
2379 page_shift = IGP_PAGE_SHIFT;
2380 page_select = IGP01E1000_PHY_PAGE_SELECT;
2381 } else {
2382 page_shift = 0;
2383 page_select = BM_PHY_PAGE_SELECT;
2384 }
2385
2386 /* Page is shifted left, PHY expects (page x 32) */
2387 ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
2388 (page << page_shift));
2389 if (ret_val)
2390 goto release;
2391 }
2392
2393 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
2394 data);
2395
2396release:
2397 hw->phy.ops.release(hw);
2398 return ret_val;
2399}
2400
2401/**
2402 * e1000e_read_phy_reg_bm - Read BM PHY register
2403 * @hw: pointer to the HW structure
2404 * @offset: register offset to be read
2405 * @data: pointer to the read data
2406 *
2407 * Acquires semaphore, if necessary, then reads the PHY register at offset
2408 * and storing the retrieved information in data. Release any acquired
2409 * semaphores before exiting.
2410 **/
2411s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
2412{
2413 s32 ret_val;
2414 u32 page = offset >> IGP_PAGE_SHIFT;
2415
2416 ret_val = hw->phy.ops.acquire(hw);
2417 if (ret_val)
2418 return ret_val;
2419
2420 /* Page 800 works differently than the rest so it has its own func */
2421 if (page == BM_WUC_PAGE) {
2422 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
2423 true, false);
2424 goto release;
2425 }
2426
2427 hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
2428
2429 if (offset > MAX_PHY_MULTI_PAGE_REG) {
2430 u32 page_shift, page_select;
2431
2432 /* Page select is register 31 for phy address 1 and 22 for
2433 * phy address 2 and 3. Page select is shifted only for
2434 * phy address 1.
2435 */
2436 if (hw->phy.addr == 1) {
2437 page_shift = IGP_PAGE_SHIFT;
2438 page_select = IGP01E1000_PHY_PAGE_SELECT;
2439 } else {
2440 page_shift = 0;
2441 page_select = BM_PHY_PAGE_SELECT;
2442 }
2443
2444 /* Page is shifted left, PHY expects (page x 32) */
2445 ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
2446 (page << page_shift));
2447 if (ret_val)
2448 goto release;
2449 }
2450
2451 ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
2452 data);
2453release:
2454 hw->phy.ops.release(hw);
2455 return ret_val;
2456}
2457
2458/**
2459 * e1000e_read_phy_reg_bm2 - Read BM PHY register
2460 * @hw: pointer to the HW structure
2461 * @offset: register offset to be read
2462 * @data: pointer to the read data
2463 *
2464 * Acquires semaphore, if necessary, then reads the PHY register at offset
2465 * and storing the retrieved information in data. Release any acquired
2466 * semaphores before exiting.
2467 **/
2468s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
2469{
2470 s32 ret_val;
2471 u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
2472
2473 ret_val = hw->phy.ops.acquire(hw);
2474 if (ret_val)
2475 return ret_val;
2476
2477 /* Page 800 works differently than the rest so it has its own func */
2478 if (page == BM_WUC_PAGE) {
2479 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
2480 true, false);
2481 goto release;
2482 }
2483
2484 hw->phy.addr = 1;
2485
2486 if (offset > MAX_PHY_MULTI_PAGE_REG) {
2487 /* Page is shifted left, PHY expects (page x 32) */
2488 ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
2489 page);
2490
2491 if (ret_val)
2492 goto release;
2493 }
2494
2495 ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
2496 data);
2497release:
2498 hw->phy.ops.release(hw);
2499 return ret_val;
2500}
2501
2502/**
2503 * e1000e_write_phy_reg_bm2 - Write BM PHY register
2504 * @hw: pointer to the HW structure
2505 * @offset: register offset to write to
2506 * @data: data to write at register offset
2507 *
2508 * Acquires semaphore, if necessary, then writes the data to PHY register
2509 * at the offset. Release any acquired semaphores before exiting.
2510 **/
2511s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
2512{
2513 s32 ret_val;
2514 u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
2515
2516 ret_val = hw->phy.ops.acquire(hw);
2517 if (ret_val)
2518 return ret_val;
2519
2520 /* Page 800 works differently than the rest so it has its own func */
2521 if (page == BM_WUC_PAGE) {
2522 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
2523 false, false);
2524 goto release;
2525 }
2526
2527 hw->phy.addr = 1;
2528
2529 if (offset > MAX_PHY_MULTI_PAGE_REG) {
2530 /* Page is shifted left, PHY expects (page x 32) */
2531 ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
2532 page);
2533
2534 if (ret_val)
2535 goto release;
2536 }
2537
2538 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
2539 data);
2540
2541release:
2542 hw->phy.ops.release(hw);
2543 return ret_val;
2544}
2545
2546/**
2547 * e1000_enable_phy_wakeup_reg_access_bm - enable access to BM wakeup registers
2548 * @hw: pointer to the HW structure
2549 * @phy_reg: pointer to store original contents of BM_WUC_ENABLE_REG
2550 *
2551 * Assumes semaphore already acquired and phy_reg points to a valid memory
2552 * address to store contents of the BM_WUC_ENABLE_REG register.
2553 **/
2554s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
2555{
2556 s32 ret_val;
2557 u16 temp;
2558
2559 /* All page select, port ctrl and wakeup registers use phy address 1 */
2560 hw->phy.addr = 1;
2561
2562 /* Select Port Control Registers page */
2563 ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
2564 if (ret_val) {
2565 e_dbg("Could not set Port Control page\n");
2566 return ret_val;
2567 }
2568
2569 ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
2570 if (ret_val) {
2571 e_dbg("Could not read PHY register %d.%d\n",
2572 BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
2573 return ret_val;
2574 }
2575
2576 /* Enable both PHY wakeup mode and Wakeup register page writes.
2577 * Prevent a power state change by disabling ME and Host PHY wakeup.
2578 */
2579 temp = *phy_reg;
2580 temp |= BM_WUC_ENABLE_BIT;
2581 temp &= ~(BM_WUC_ME_WU_BIT | BM_WUC_HOST_WU_BIT);
2582
2583 ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, temp);
2584 if (ret_val) {
2585 e_dbg("Could not write PHY register %d.%d\n",
2586 BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
2587 return ret_val;
2588 }
2589
2590 /* Select Host Wakeup Registers page - caller now able to write
2591 * registers on the Wakeup registers page
2592 */
2593 return e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
2594}
2595
2596/**
2597 * e1000_disable_phy_wakeup_reg_access_bm - disable access to BM wakeup regs
2598 * @hw: pointer to the HW structure
2599 * @phy_reg: pointer to original contents of BM_WUC_ENABLE_REG
2600 *
2601 * Restore BM_WUC_ENABLE_REG to its original value.
2602 *
2603 * Assumes semaphore already acquired and *phy_reg is the contents of the
2604 * BM_WUC_ENABLE_REG before register(s) on BM_WUC_PAGE were accessed by
2605 * caller.
2606 **/
2607s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
2608{
2609 s32 ret_val;
2610
2611 /* Select Port Control Registers page */
2612 ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
2613 if (ret_val) {
2614 e_dbg("Could not set Port Control page\n");
2615 return ret_val;
2616 }
2617
2618 /* Restore 769.17 to its original value */
2619 ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, *phy_reg);
2620 if (ret_val)
2621 e_dbg("Could not restore PHY register %d.%d\n",
2622 BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
2623
2624 return ret_val;
2625}
2626
2627/**
2628 * e1000_access_phy_wakeup_reg_bm - Read/write BM PHY wakeup register
2629 * @hw: pointer to the HW structure
2630 * @offset: register offset to be read or written
2631 * @data: pointer to the data to read or write
2632 * @read: determines if operation is read or write
2633 * @page_set: BM_WUC_PAGE already set and access enabled
2634 *
2635 * Read the PHY register at offset and store the retrieved information in
2636 * data, or write data to PHY register at offset. Note the procedure to
2637 * access the PHY wakeup registers is different than reading the other PHY
2638 * registers. It works as such:
2639 * 1) Set 769.17.2 (page 769, register 17, bit 2) = 1
2640 * 2) Set page to 800 for host (801 if we were manageability)
2641 * 3) Write the address using the address opcode (0x11)
2642 * 4) Read or write the data using the data opcode (0x12)
2643 * 5) Restore 769.17.2 to its original value
2644 *
2645 * Steps 1 and 2 are done by e1000_enable_phy_wakeup_reg_access_bm() and
2646 * step 5 is done by e1000_disable_phy_wakeup_reg_access_bm().
2647 *
2648 * Assumes semaphore is already acquired. When page_set==true, assumes
2649 * the PHY page is set to BM_WUC_PAGE (i.e. a function in the call stack
2650 * is responsible for calls to e1000_[enable|disable]_phy_wakeup_reg_bm()).
2651 **/
2652static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
2653 u16 *data, bool read, bool page_set)
2654{
2655 s32 ret_val;
2656 u16 reg = BM_PHY_REG_NUM(offset);
2657 u16 page = BM_PHY_REG_PAGE(offset);
2658 u16 phy_reg = 0;
2659
2660 /* Gig must be disabled for MDIO accesses to Host Wakeup reg page */
2661 if ((hw->mac.type == e1000_pchlan) &&
2662 (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
2663 e_dbg("Attempting to access page %d while gig enabled.\n",
2664 page);
2665
2666 if (!page_set) {
2667 /* Enable access to PHY wakeup registers */
2668 ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
2669 if (ret_val) {
2670 e_dbg("Could not enable PHY wakeup reg access\n");
2671 return ret_val;
2672 }
2673 }
2674
2675 e_dbg("Accessing PHY page %d reg 0x%x\n", page, reg);
2676
2677 /* Write the Wakeup register page offset value using opcode 0x11 */
2678 ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
2679 if (ret_val) {
2680 e_dbg("Could not write address opcode to page %d\n", page);
2681 return ret_val;
2682 }
2683
2684 if (read) {
2685 /* Read the Wakeup register page value using opcode 0x12 */
2686 ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
2687 data);
2688 } else {
2689 /* Write the Wakeup register page value using opcode 0x12 */
2690 ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
2691 *data);
2692 }
2693
2694 if (ret_val) {
2695 e_dbg("Could not access PHY reg %d.%d\n", page, reg);
2696 return ret_val;
2697 }
2698
2699 if (!page_set)
2700 ret_val = e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
2701
2702 return ret_val;
2703}
2704
2705/**
2706 * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
2707 * @hw: pointer to the HW structure
2708 *
2709 * In the case of a PHY power down to save power, or to turn off link during a
2710 * driver unload, or wake on lan is not enabled, restore the link to previous
2711 * settings.
2712 **/
2713void e1000_power_up_phy_copper(struct e1000_hw *hw)
2714{
2715 u16 mii_reg = 0;
2716
2717 /* The PHY will retain its settings across a power down/up cycle */
2718 e1e_rphy(hw, MII_BMCR, &mii_reg);
2719 mii_reg &= ~BMCR_PDOWN;
2720 e1e_wphy(hw, MII_BMCR, mii_reg);
2721}
2722
2723/**
2724 * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
2725 * @hw: pointer to the HW structure
2726 *
2727 * In the case of a PHY power down to save power, or to turn off link during a
2728 * driver unload, or wake on lan is not enabled, restore the link to previous
2729 * settings.
2730 **/
2731void e1000_power_down_phy_copper(struct e1000_hw *hw)
2732{
2733 u16 mii_reg = 0;
2734
2735 /* The PHY will retain its settings across a power down/up cycle */
2736 e1e_rphy(hw, MII_BMCR, &mii_reg);
2737 mii_reg |= BMCR_PDOWN;
2738 e1e_wphy(hw, MII_BMCR, mii_reg);
2739 usleep_range(1000, 2000);
2740}
2741
2742/**
2743 * __e1000_read_phy_reg_hv - Read HV PHY register
2744 * @hw: pointer to the HW structure
2745 * @offset: register offset to be read
2746 * @data: pointer to the read data
2747 * @locked: semaphore has already been acquired or not
2748 *
2749 * Acquires semaphore, if necessary, then reads the PHY register at offset
2750 * and stores the retrieved information in data. Release any acquired
2751 * semaphore before exiting.
2752 **/
2753static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
2754 bool locked, bool page_set)
2755{
2756 s32 ret_val;
2757 u16 page = BM_PHY_REG_PAGE(offset);
2758 u16 reg = BM_PHY_REG_NUM(offset);
2759 u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
2760
2761 if (!locked) {
2762 ret_val = hw->phy.ops.acquire(hw);
2763 if (ret_val)
2764 return ret_val;
2765 }
2766
2767 /* Page 800 works differently than the rest so it has its own func */
2768 if (page == BM_WUC_PAGE) {
2769 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
2770 true, page_set);
2771 goto out;
2772 }
2773
2774 if (page > 0 && page < HV_INTC_FC_PAGE_START) {
2775 ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
2776 data, true);
2777 goto out;
2778 }
2779
2780 if (!page_set) {
2781 if (page == HV_INTC_FC_PAGE_START)
2782 page = 0;
2783
2784 if (reg > MAX_PHY_MULTI_PAGE_REG) {
2785 /* Page is shifted left, PHY expects (page x 32) */
2786 ret_val = e1000_set_page_igp(hw,
2787 (page << IGP_PAGE_SHIFT));
2788
2789 hw->phy.addr = phy_addr;
2790
2791 if (ret_val)
2792 goto out;
2793 }
2794 }
2795
2796 e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
2797 page << IGP_PAGE_SHIFT, reg);
2798
2799 ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data);
2800out:
2801 if (!locked)
2802 hw->phy.ops.release(hw);
2803
2804 return ret_val;
2805}
2806
2807/**
2808 * e1000_read_phy_reg_hv - Read HV PHY register
2809 * @hw: pointer to the HW structure
2810 * @offset: register offset to be read
2811 * @data: pointer to the read data
2812 *
2813 * Acquires semaphore then reads the PHY register at offset and stores
2814 * the retrieved information in data. Release the acquired semaphore
2815 * before exiting.
2816 **/
2817s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
2818{
2819 return __e1000_read_phy_reg_hv(hw, offset, data, false, false);
2820}
2821
2822/**
2823 * e1000_read_phy_reg_hv_locked - Read HV PHY register
2824 * @hw: pointer to the HW structure
2825 * @offset: register offset to be read
2826 * @data: pointer to the read data
2827 *
2828 * Reads the PHY register at offset and stores the retrieved information
2829 * in data. Assumes semaphore already acquired.
2830 **/
2831s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
2832{
2833 return __e1000_read_phy_reg_hv(hw, offset, data, true, false);
2834}
2835
2836/**
2837 * e1000_read_phy_reg_page_hv - Read HV PHY register
2838 * @hw: pointer to the HW structure
2839 * @offset: register offset to write to
2840 * @data: data to write at register offset
2841 *
2842 * Reads the PHY register at offset and stores the retrieved information
2843 * in data. Assumes semaphore already acquired and page already set.
2844 **/
2845s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data)
2846{
2847 return __e1000_read_phy_reg_hv(hw, offset, data, true, true);
2848}
2849
2850/**
2851 * __e1000_write_phy_reg_hv - Write HV PHY register
2852 * @hw: pointer to the HW structure
2853 * @offset: register offset to write to
2854 * @data: data to write at register offset
2855 * @locked: semaphore has already been acquired or not
2856 *
2857 * Acquires semaphore, if necessary, then writes the data to PHY register
2858 * at the offset. Release any acquired semaphores before exiting.
2859 **/
2860static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
2861 bool locked, bool page_set)
2862{
2863 s32 ret_val;
2864 u16 page = BM_PHY_REG_PAGE(offset);
2865 u16 reg = BM_PHY_REG_NUM(offset);
2866 u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
2867
2868 if (!locked) {
2869 ret_val = hw->phy.ops.acquire(hw);
2870 if (ret_val)
2871 return ret_val;
2872 }
2873
2874 /* Page 800 works differently than the rest so it has its own func */
2875 if (page == BM_WUC_PAGE) {
2876 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
2877 false, page_set);
2878 goto out;
2879 }
2880
2881 if (page > 0 && page < HV_INTC_FC_PAGE_START) {
2882 ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
2883 &data, false);
2884 goto out;
2885 }
2886
2887 if (!page_set) {
2888 if (page == HV_INTC_FC_PAGE_START)
2889 page = 0;
2890
2891 /* Workaround MDIO accesses being disabled after entering IEEE
2892 * Power Down (when bit 11 of the PHY Control register is set)
2893 */
2894 if ((hw->phy.type == e1000_phy_82578) &&
2895 (hw->phy.revision >= 1) &&
2896 (hw->phy.addr == 2) &&
2897 !(MAX_PHY_REG_ADDRESS & reg) && (data & (1 << 11))) {
2898 u16 data2 = 0x7EFF;
2899
2900 ret_val = e1000_access_phy_debug_regs_hv(hw,
2901 (1 << 6) | 0x3,
2902 &data2, false);
2903 if (ret_val)
2904 goto out;
2905 }
2906
2907 if (reg > MAX_PHY_MULTI_PAGE_REG) {
2908 /* Page is shifted left, PHY expects (page x 32) */
2909 ret_val = e1000_set_page_igp(hw,
2910 (page << IGP_PAGE_SHIFT));
2911
2912 hw->phy.addr = phy_addr;
2913
2914 if (ret_val)
2915 goto out;
2916 }
2917 }
2918
2919 e_dbg("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
2920 page << IGP_PAGE_SHIFT, reg);
2921
2922 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
2923 data);
2924
2925out:
2926 if (!locked)
2927 hw->phy.ops.release(hw);
2928
2929 return ret_val;
2930}
2931
2932/**
2933 * e1000_write_phy_reg_hv - Write HV PHY register
2934 * @hw: pointer to the HW structure
2935 * @offset: register offset to write to
2936 * @data: data to write at register offset
2937 *
2938 * Acquires semaphore then writes the data to PHY register at the offset.
2939 * Release the acquired semaphores before exiting.
2940 **/
2941s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
2942{
2943 return __e1000_write_phy_reg_hv(hw, offset, data, false, false);
2944}
2945
2946/**
2947 * e1000_write_phy_reg_hv_locked - Write HV PHY register
2948 * @hw: pointer to the HW structure
2949 * @offset: register offset to write to
2950 * @data: data to write at register offset
2951 *
2952 * Writes the data to PHY register at the offset. Assumes semaphore
2953 * already acquired.
2954 **/
2955s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
2956{
2957 return __e1000_write_phy_reg_hv(hw, offset, data, true, false);
2958}
2959
2960/**
2961 * e1000_write_phy_reg_page_hv - Write HV PHY register
2962 * @hw: pointer to the HW structure
2963 * @offset: register offset to write to
2964 * @data: data to write at register offset
2965 *
2966 * Writes the data to PHY register at the offset. Assumes semaphore
2967 * already acquired and page already set.
2968 **/
2969s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data)
2970{
2971 return __e1000_write_phy_reg_hv(hw, offset, data, true, true);
2972}
2973
2974/**
2975 * e1000_get_phy_addr_for_hv_page - Get PHY address based on page
2976 * @page: page to be accessed
2977 **/
2978static u32 e1000_get_phy_addr_for_hv_page(u32 page)
2979{
2980 u32 phy_addr = 2;
2981
2982 if (page >= HV_INTC_FC_PAGE_START)
2983 phy_addr = 1;
2984
2985 return phy_addr;
2986}
2987
2988/**
2989 * e1000_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers
2990 * @hw: pointer to the HW structure
2991 * @offset: register offset to be read or written
2992 * @data: pointer to the data to be read or written
2993 * @read: determines if operation is read or write
2994 *
2995 * Reads the PHY register at offset and stores the retreived information
2996 * in data. Assumes semaphore already acquired. Note that the procedure
2997 * to access these regs uses the address port and data port to read/write.
2998 * These accesses done with PHY address 2 and without using pages.
2999 **/
3000static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
3001 u16 *data, bool read)
3002{
3003 s32 ret_val;
3004 u32 addr_reg;
3005 u32 data_reg;
3006
3007 /* This takes care of the difference with desktop vs mobile phy */
3008 addr_reg = ((hw->phy.type == e1000_phy_82578) ?
3009 I82578_ADDR_REG : I82577_ADDR_REG);
3010 data_reg = addr_reg + 1;
3011
3012 /* All operations in this function are phy address 2 */
3013 hw->phy.addr = 2;
3014
3015 /* masking with 0x3F to remove the page from offset */
3016 ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
3017 if (ret_val) {
3018 e_dbg("Could not write the Address Offset port register\n");
3019 return ret_val;
3020 }
3021
3022 /* Read or write the data value next */
3023 if (read)
3024 ret_val = e1000e_read_phy_reg_mdic(hw, data_reg, data);
3025 else
3026 ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
3027
3028 if (ret_val)
3029 e_dbg("Could not access the Data port register\n");
3030
3031 return ret_val;
3032}
3033
3034/**
3035 * e1000_link_stall_workaround_hv - Si workaround
3036 * @hw: pointer to the HW structure
3037 *
3038 * This function works around a Si bug where the link partner can get
3039 * a link up indication before the PHY does. If small packets are sent
3040 * by the link partner they can be placed in the packet buffer without
3041 * being properly accounted for by the PHY and will stall preventing
3042 * further packets from being received. The workaround is to clear the
3043 * packet buffer after the PHY detects link up.
3044 **/
3045s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
3046{
3047 s32 ret_val = 0;
3048 u16 data;
3049
3050 if (hw->phy.type != e1000_phy_82578)
3051 return 0;
3052
3053 /* Do not apply workaround if in PHY loopback bit 14 set */
3054 e1e_rphy(hw, MII_BMCR, &data);
3055 if (data & BMCR_LOOPBACK)
3056 return 0;
3057
3058 /* check if link is up and at 1Gbps */
3059 ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
3060 if (ret_val)
3061 return ret_val;
3062
3063 data &= (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
3064 BM_CS_STATUS_SPEED_MASK);
3065
3066 if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
3067 BM_CS_STATUS_SPEED_1000))
3068 return 0;
3069
3070 msleep(200);
3071
3072 /* flush the packets in the fifo buffer */
3073 ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL,
3074 (HV_MUX_DATA_CTRL_GEN_TO_MAC |
3075 HV_MUX_DATA_CTRL_FORCE_SPEED));
3076 if (ret_val)
3077 return ret_val;
3078
3079 return e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
3080}
3081
3082/**
3083 * e1000_check_polarity_82577 - Checks the polarity.
3084 * @hw: pointer to the HW structure
3085 *
3086 * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
3087 *
3088 * Polarity is determined based on the PHY specific status register.
3089 **/
3090s32 e1000_check_polarity_82577(struct e1000_hw *hw)
3091{
3092 struct e1000_phy_info *phy = &hw->phy;
3093 s32 ret_val;
3094 u16 data;
3095
3096 ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
3097
3098 if (!ret_val)
3099 phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY)
3100 ? e1000_rev_polarity_reversed
3101 : e1000_rev_polarity_normal);
3102
3103 return ret_val;
3104}
3105
3106/**
3107 * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
3108 * @hw: pointer to the HW structure
3109 *
3110 * Calls the PHY setup function to force speed and duplex.
3111 **/
3112s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
3113{
3114 struct e1000_phy_info *phy = &hw->phy;
3115 s32 ret_val;
3116 u16 phy_data;
3117 bool link;
3118
3119 ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
3120 if (ret_val)
3121 return ret_val;
3122
3123 e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
3124
3125 ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
3126 if (ret_val)
3127 return ret_val;
3128
3129 udelay(1);
3130
3131 if (phy->autoneg_wait_to_complete) {
3132 e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
3133
3134 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
3135 100000, &link);
3136 if (ret_val)
3137 return ret_val;
3138
3139 if (!link)
3140 e_dbg("Link taking longer than expected.\n");
3141
3142 /* Try once more */
3143 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
3144 100000, &link);
3145 }
3146
3147 return ret_val;
3148}
3149
3150/**
3151 * e1000_get_phy_info_82577 - Retrieve I82577 PHY information
3152 * @hw: pointer to the HW structure
3153 *
3154 * Read PHY status to determine if link is up. If link is up, then
3155 * set/determine 10base-T extended distance and polarity correction. Read
3156 * PHY port status to determine MDI/MDIx and speed. Based on the speed,
3157 * determine on the cable length, local and remote receiver.
3158 **/
3159s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
3160{
3161 struct e1000_phy_info *phy = &hw->phy;
3162 s32 ret_val;
3163 u16 data;
3164 bool link;
3165
3166 ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
3167 if (ret_val)
3168 return ret_val;
3169
3170 if (!link) {
3171 e_dbg("Phy info is only valid if link is up\n");
3172 return -E1000_ERR_CONFIG;
3173 }
3174
3175 phy->polarity_correction = true;
3176
3177 ret_val = e1000_check_polarity_82577(hw);
3178 if (ret_val)
3179 return ret_val;
3180
3181 ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
3182 if (ret_val)
3183 return ret_val;
3184
3185 phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX);
3186
3187 if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
3188 I82577_PHY_STATUS2_SPEED_1000MBPS) {
3189 ret_val = hw->phy.ops.get_cable_length(hw);
3190 if (ret_val)
3191 return ret_val;
3192
3193 ret_val = e1e_rphy(hw, MII_STAT1000, &data);
3194 if (ret_val)
3195 return ret_val;
3196
3197 phy->local_rx = (data & LPA_1000LOCALRXOK)
3198 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
3199
3200 phy->remote_rx = (data & LPA_1000REMRXOK)
3201 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
3202 } else {
3203 phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
3204 phy->local_rx = e1000_1000t_rx_status_undefined;
3205 phy->remote_rx = e1000_1000t_rx_status_undefined;
3206 }
3207
3208 return 0;
3209}
3210
3211/**
3212 * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY
3213 * @hw: pointer to the HW structure
3214 *
3215 * Reads the diagnostic status register and verifies result is valid before
3216 * placing it in the phy_cable_length field.
3217 **/
3218s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
3219{
3220 struct e1000_phy_info *phy = &hw->phy;
3221 s32 ret_val;
3222 u16 phy_data, length;
3223
3224 ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
3225 if (ret_val)
3226 return ret_val;
3227
3228 length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
3229 I82577_DSTATUS_CABLE_LENGTH_SHIFT);
3230
3231 if (length == E1000_CABLE_LENGTH_UNDEFINED)
3232 return -E1000_ERR_PHY;
3233
3234 phy->cable_length = length;
3235
3236 return 0;
3237}
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright(c) 1999 - 2018 Intel Corporation. */
3
4#include "e1000.h"
5
6static s32 e1000_wait_autoneg(struct e1000_hw *hw);
7static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
8 u16 *data, bool read, bool page_set);
9static u32 e1000_get_phy_addr_for_hv_page(u32 page);
10static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
11 u16 *data, bool read);
12
13/* Cable length tables */
14static const u16 e1000_m88_cable_length_table[] = {
15 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED
16};
17
18#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
19 ARRAY_SIZE(e1000_m88_cable_length_table)
20
21static const u16 e1000_igp_2_cable_length_table[] = {
22 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
23 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
24 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
25 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
26 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
27 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
28 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
29 124
30};
31
32#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
33 ARRAY_SIZE(e1000_igp_2_cable_length_table)
34
35/**
36 * e1000e_check_reset_block_generic - Check if PHY reset is blocked
37 * @hw: pointer to the HW structure
38 *
39 * Read the PHY management control register and check whether a PHY reset
40 * is blocked. If a reset is not blocked return 0, otherwise
41 * return E1000_BLK_PHY_RESET (12).
42 **/
43s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
44{
45 u32 manc;
46
47 manc = er32(MANC);
48
49 return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : 0;
50}
51
52/**
53 * e1000e_get_phy_id - Retrieve the PHY ID and revision
54 * @hw: pointer to the HW structure
55 *
56 * Reads the PHY registers and stores the PHY ID and possibly the PHY
57 * revision in the hardware structure.
58 **/
59s32 e1000e_get_phy_id(struct e1000_hw *hw)
60{
61 struct e1000_phy_info *phy = &hw->phy;
62 s32 ret_val = 0;
63 u16 phy_id;
64 u16 retry_count = 0;
65
66 if (!phy->ops.read_reg)
67 return 0;
68
69 while (retry_count < 2) {
70 ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id);
71 if (ret_val)
72 return ret_val;
73
74 phy->id = (u32)(phy_id << 16);
75 usleep_range(20, 40);
76 ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
77 if (ret_val)
78 return ret_val;
79
80 phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
81 phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
82
83 if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
84 return 0;
85
86 retry_count++;
87 }
88
89 return 0;
90}
91
92/**
93 * e1000e_phy_reset_dsp - Reset PHY DSP
94 * @hw: pointer to the HW structure
95 *
96 * Reset the digital signal processor.
97 **/
98s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
99{
100 s32 ret_val;
101
102 ret_val = e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
103 if (ret_val)
104 return ret_val;
105
106 return e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0);
107}
108
109/**
110 * e1000e_read_phy_reg_mdic - Read MDI control register
111 * @hw: pointer to the HW structure
112 * @offset: register offset to be read
113 * @data: pointer to the read data
114 *
115 * Reads the MDI control register in the PHY at offset and stores the
116 * information read to data.
117 **/
118s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
119{
120 struct e1000_phy_info *phy = &hw->phy;
121 u32 i, mdic = 0;
122
123 if (offset > MAX_PHY_REG_ADDRESS) {
124 e_dbg("PHY Address %d is out of range\n", offset);
125 return -E1000_ERR_PARAM;
126 }
127
128 /* Set up Op-code, Phy Address, and register offset in the MDI
129 * Control register. The MAC will take care of interfacing with the
130 * PHY to retrieve the desired data.
131 */
132 mdic = ((offset << E1000_MDIC_REG_SHIFT) |
133 (phy->addr << E1000_MDIC_PHY_SHIFT) |
134 (E1000_MDIC_OP_READ));
135
136 ew32(MDIC, mdic);
137
138 /* Poll the ready bit to see if the MDI read completed
139 * Increasing the time out as testing showed failures with
140 * the lower time out
141 */
142 for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
143 udelay(50);
144 mdic = er32(MDIC);
145 if (mdic & E1000_MDIC_READY)
146 break;
147 }
148 if (!(mdic & E1000_MDIC_READY)) {
149 e_dbg("MDI Read did not complete\n");
150 return -E1000_ERR_PHY;
151 }
152 if (mdic & E1000_MDIC_ERROR) {
153 e_dbg("MDI Error\n");
154 return -E1000_ERR_PHY;
155 }
156 if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
157 e_dbg("MDI Read offset error - requested %d, returned %d\n",
158 offset,
159 (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
160 return -E1000_ERR_PHY;
161 }
162 *data = (u16)mdic;
163
164 /* Allow some time after each MDIC transaction to avoid
165 * reading duplicate data in the next MDIC transaction.
166 */
167 if (hw->mac.type == e1000_pch2lan)
168 udelay(100);
169
170 return 0;
171}
172
173/**
174 * e1000e_write_phy_reg_mdic - Write MDI control register
175 * @hw: pointer to the HW structure
176 * @offset: register offset to write to
177 * @data: data to write to register at offset
178 *
179 * Writes data to MDI control register in the PHY at offset.
180 **/
181s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
182{
183 struct e1000_phy_info *phy = &hw->phy;
184 u32 i, mdic = 0;
185
186 if (offset > MAX_PHY_REG_ADDRESS) {
187 e_dbg("PHY Address %d is out of range\n", offset);
188 return -E1000_ERR_PARAM;
189 }
190
191 /* Set up Op-code, Phy Address, and register offset in the MDI
192 * Control register. The MAC will take care of interfacing with the
193 * PHY to retrieve the desired data.
194 */
195 mdic = (((u32)data) |
196 (offset << E1000_MDIC_REG_SHIFT) |
197 (phy->addr << E1000_MDIC_PHY_SHIFT) |
198 (E1000_MDIC_OP_WRITE));
199
200 ew32(MDIC, mdic);
201
202 /* Poll the ready bit to see if the MDI read completed
203 * Increasing the time out as testing showed failures with
204 * the lower time out
205 */
206 for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
207 udelay(50);
208 mdic = er32(MDIC);
209 if (mdic & E1000_MDIC_READY)
210 break;
211 }
212 if (!(mdic & E1000_MDIC_READY)) {
213 e_dbg("MDI Write did not complete\n");
214 return -E1000_ERR_PHY;
215 }
216 if (mdic & E1000_MDIC_ERROR) {
217 e_dbg("MDI Error\n");
218 return -E1000_ERR_PHY;
219 }
220 if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
221 e_dbg("MDI Write offset error - requested %d, returned %d\n",
222 offset,
223 (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
224 return -E1000_ERR_PHY;
225 }
226
227 /* Allow some time after each MDIC transaction to avoid
228 * reading duplicate data in the next MDIC transaction.
229 */
230 if (hw->mac.type == e1000_pch2lan)
231 udelay(100);
232
233 return 0;
234}
235
236/**
237 * e1000e_read_phy_reg_m88 - Read m88 PHY register
238 * @hw: pointer to the HW structure
239 * @offset: register offset to be read
240 * @data: pointer to the read data
241 *
242 * Acquires semaphore, if necessary, then reads the PHY register at offset
243 * and storing the retrieved information in data. Release any acquired
244 * semaphores before exiting.
245 **/
246s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
247{
248 s32 ret_val;
249
250 ret_val = hw->phy.ops.acquire(hw);
251 if (ret_val)
252 return ret_val;
253
254 ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
255 data);
256
257 hw->phy.ops.release(hw);
258
259 return ret_val;
260}
261
262/**
263 * e1000e_write_phy_reg_m88 - Write m88 PHY register
264 * @hw: pointer to the HW structure
265 * @offset: register offset to write to
266 * @data: data to write at register offset
267 *
268 * Acquires semaphore, if necessary, then writes the data to PHY register
269 * at the offset. Release any acquired semaphores before exiting.
270 **/
271s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
272{
273 s32 ret_val;
274
275 ret_val = hw->phy.ops.acquire(hw);
276 if (ret_val)
277 return ret_val;
278
279 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
280 data);
281
282 hw->phy.ops.release(hw);
283
284 return ret_val;
285}
286
287/**
288 * e1000_set_page_igp - Set page as on IGP-like PHY(s)
289 * @hw: pointer to the HW structure
290 * @page: page to set (shifted left when necessary)
291 *
292 * Sets PHY page required for PHY register access. Assumes semaphore is
293 * already acquired. Note, this function sets phy.addr to 1 so the caller
294 * must set it appropriately (if necessary) after this function returns.
295 **/
296s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page)
297{
298 e_dbg("Setting page 0x%x\n", page);
299
300 hw->phy.addr = 1;
301
302 return e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page);
303}
304
305/**
306 * __e1000e_read_phy_reg_igp - Read igp PHY register
307 * @hw: pointer to the HW structure
308 * @offset: register offset to be read
309 * @data: pointer to the read data
310 * @locked: semaphore has already been acquired or not
311 *
312 * Acquires semaphore, if necessary, then reads the PHY register at offset
313 * and stores the retrieved information in data. Release any acquired
314 * semaphores before exiting.
315 **/
316static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
317 bool locked)
318{
319 s32 ret_val = 0;
320
321 if (!locked) {
322 if (!hw->phy.ops.acquire)
323 return 0;
324
325 ret_val = hw->phy.ops.acquire(hw);
326 if (ret_val)
327 return ret_val;
328 }
329
330 if (offset > MAX_PHY_MULTI_PAGE_REG)
331 ret_val = e1000e_write_phy_reg_mdic(hw,
332 IGP01E1000_PHY_PAGE_SELECT,
333 (u16)offset);
334 if (!ret_val)
335 ret_val = e1000e_read_phy_reg_mdic(hw,
336 MAX_PHY_REG_ADDRESS & offset,
337 data);
338 if (!locked)
339 hw->phy.ops.release(hw);
340
341 return ret_val;
342}
343
344/**
345 * e1000e_read_phy_reg_igp - Read igp PHY register
346 * @hw: pointer to the HW structure
347 * @offset: register offset to be read
348 * @data: pointer to the read data
349 *
350 * Acquires semaphore then reads the PHY register at offset and stores the
351 * retrieved information in data.
352 * Release the acquired semaphore before exiting.
353 **/
354s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
355{
356 return __e1000e_read_phy_reg_igp(hw, offset, data, false);
357}
358
359/**
360 * e1000e_read_phy_reg_igp_locked - Read igp PHY register
361 * @hw: pointer to the HW structure
362 * @offset: register offset to be read
363 * @data: pointer to the read data
364 *
365 * Reads the PHY register at offset and stores the retrieved information
366 * in data. Assumes semaphore already acquired.
367 **/
368s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
369{
370 return __e1000e_read_phy_reg_igp(hw, offset, data, true);
371}
372
373/**
374 * __e1000e_write_phy_reg_igp - Write igp PHY register
375 * @hw: pointer to the HW structure
376 * @offset: register offset to write to
377 * @data: data to write at register offset
378 * @locked: semaphore has already been acquired or not
379 *
380 * Acquires semaphore, if necessary, then writes the data to PHY register
381 * at the offset. Release any acquired semaphores before exiting.
382 **/
383static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
384 bool locked)
385{
386 s32 ret_val = 0;
387
388 if (!locked) {
389 if (!hw->phy.ops.acquire)
390 return 0;
391
392 ret_val = hw->phy.ops.acquire(hw);
393 if (ret_val)
394 return ret_val;
395 }
396
397 if (offset > MAX_PHY_MULTI_PAGE_REG)
398 ret_val = e1000e_write_phy_reg_mdic(hw,
399 IGP01E1000_PHY_PAGE_SELECT,
400 (u16)offset);
401 if (!ret_val)
402 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
403 offset, data);
404 if (!locked)
405 hw->phy.ops.release(hw);
406
407 return ret_val;
408}
409
410/**
411 * e1000e_write_phy_reg_igp - Write igp PHY register
412 * @hw: pointer to the HW structure
413 * @offset: register offset to write to
414 * @data: data to write at register offset
415 *
416 * Acquires semaphore then writes the data to PHY register
417 * at the offset. Release any acquired semaphores before exiting.
418 **/
419s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
420{
421 return __e1000e_write_phy_reg_igp(hw, offset, data, false);
422}
423
424/**
425 * e1000e_write_phy_reg_igp_locked - Write igp PHY register
426 * @hw: pointer to the HW structure
427 * @offset: register offset to write to
428 * @data: data to write at register offset
429 *
430 * Writes the data to PHY register at the offset.
431 * Assumes semaphore already acquired.
432 **/
433s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
434{
435 return __e1000e_write_phy_reg_igp(hw, offset, data, true);
436}
437
438/**
439 * __e1000_read_kmrn_reg - Read kumeran register
440 * @hw: pointer to the HW structure
441 * @offset: register offset to be read
442 * @data: pointer to the read data
443 * @locked: semaphore has already been acquired or not
444 *
445 * Acquires semaphore, if necessary. Then reads the PHY register at offset
446 * using the kumeran interface. The information retrieved is stored in data.
447 * Release any acquired semaphores before exiting.
448 **/
449static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
450 bool locked)
451{
452 u32 kmrnctrlsta;
453
454 if (!locked) {
455 s32 ret_val = 0;
456
457 if (!hw->phy.ops.acquire)
458 return 0;
459
460 ret_val = hw->phy.ops.acquire(hw);
461 if (ret_val)
462 return ret_val;
463 }
464
465 kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
466 E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
467 ew32(KMRNCTRLSTA, kmrnctrlsta);
468 e1e_flush();
469
470 udelay(2);
471
472 kmrnctrlsta = er32(KMRNCTRLSTA);
473 *data = (u16)kmrnctrlsta;
474
475 if (!locked)
476 hw->phy.ops.release(hw);
477
478 return 0;
479}
480
481/**
482 * e1000e_read_kmrn_reg - Read kumeran register
483 * @hw: pointer to the HW structure
484 * @offset: register offset to be read
485 * @data: pointer to the read data
486 *
487 * Acquires semaphore then reads the PHY register at offset using the
488 * kumeran interface. The information retrieved is stored in data.
489 * Release the acquired semaphore before exiting.
490 **/
491s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
492{
493 return __e1000_read_kmrn_reg(hw, offset, data, false);
494}
495
496/**
497 * e1000e_read_kmrn_reg_locked - Read kumeran register
498 * @hw: pointer to the HW structure
499 * @offset: register offset to be read
500 * @data: pointer to the read data
501 *
502 * Reads the PHY register at offset using the kumeran interface. The
503 * information retrieved is stored in data.
504 * Assumes semaphore already acquired.
505 **/
506s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
507{
508 return __e1000_read_kmrn_reg(hw, offset, data, true);
509}
510
511/**
512 * __e1000_write_kmrn_reg - Write kumeran register
513 * @hw: pointer to the HW structure
514 * @offset: register offset to write to
515 * @data: data to write at register offset
516 * @locked: semaphore has already been acquired or not
517 *
518 * Acquires semaphore, if necessary. Then write the data to PHY register
519 * at the offset using the kumeran interface. Release any acquired semaphores
520 * before exiting.
521 **/
522static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
523 bool locked)
524{
525 u32 kmrnctrlsta;
526
527 if (!locked) {
528 s32 ret_val = 0;
529
530 if (!hw->phy.ops.acquire)
531 return 0;
532
533 ret_val = hw->phy.ops.acquire(hw);
534 if (ret_val)
535 return ret_val;
536 }
537
538 kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
539 E1000_KMRNCTRLSTA_OFFSET) | data;
540 ew32(KMRNCTRLSTA, kmrnctrlsta);
541 e1e_flush();
542
543 udelay(2);
544
545 if (!locked)
546 hw->phy.ops.release(hw);
547
548 return 0;
549}
550
551/**
552 * e1000e_write_kmrn_reg - Write kumeran register
553 * @hw: pointer to the HW structure
554 * @offset: register offset to write to
555 * @data: data to write at register offset
556 *
557 * Acquires semaphore then writes the data to the PHY register at the offset
558 * using the kumeran interface. Release the acquired semaphore before exiting.
559 **/
560s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
561{
562 return __e1000_write_kmrn_reg(hw, offset, data, false);
563}
564
565/**
566 * e1000e_write_kmrn_reg_locked - Write kumeran register
567 * @hw: pointer to the HW structure
568 * @offset: register offset to write to
569 * @data: data to write at register offset
570 *
571 * Write the data to PHY register at the offset using the kumeran interface.
572 * Assumes semaphore already acquired.
573 **/
574s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
575{
576 return __e1000_write_kmrn_reg(hw, offset, data, true);
577}
578
579/**
580 * e1000_set_master_slave_mode - Setup PHY for Master/slave mode
581 * @hw: pointer to the HW structure
582 *
583 * Sets up Master/slave mode
584 **/
585static s32 e1000_set_master_slave_mode(struct e1000_hw *hw)
586{
587 s32 ret_val;
588 u16 phy_data;
589
590 /* Resolve Master/Slave mode */
591 ret_val = e1e_rphy(hw, MII_CTRL1000, &phy_data);
592 if (ret_val)
593 return ret_val;
594
595 /* load defaults for future use */
596 hw->phy.original_ms_type = (phy_data & CTL1000_ENABLE_MASTER) ?
597 ((phy_data & CTL1000_AS_MASTER) ?
598 e1000_ms_force_master : e1000_ms_force_slave) : e1000_ms_auto;
599
600 switch (hw->phy.ms_type) {
601 case e1000_ms_force_master:
602 phy_data |= (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
603 break;
604 case e1000_ms_force_slave:
605 phy_data |= CTL1000_ENABLE_MASTER;
606 phy_data &= ~(CTL1000_AS_MASTER);
607 break;
608 case e1000_ms_auto:
609 phy_data &= ~CTL1000_ENABLE_MASTER;
610 fallthrough;
611 default:
612 break;
613 }
614
615 return e1e_wphy(hw, MII_CTRL1000, phy_data);
616}
617
618/**
619 * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
620 * @hw: pointer to the HW structure
621 *
622 * Sets up Carrier-sense on Transmit and downshift values.
623 **/
624s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
625{
626 s32 ret_val;
627 u16 phy_data;
628
629 /* Enable CRS on Tx. This must be set for half-duplex operation. */
630 ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
631 if (ret_val)
632 return ret_val;
633
634 phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
635
636 /* Enable downshift */
637 phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
638
639 ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
640 if (ret_val)
641 return ret_val;
642
643 /* Set MDI/MDIX mode */
644 ret_val = e1e_rphy(hw, I82577_PHY_CTRL_2, &phy_data);
645 if (ret_val)
646 return ret_val;
647 phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
648 /* Options:
649 * 0 - Auto (default)
650 * 1 - MDI mode
651 * 2 - MDI-X mode
652 */
653 switch (hw->phy.mdix) {
654 case 1:
655 break;
656 case 2:
657 phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
658 break;
659 case 0:
660 default:
661 phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
662 break;
663 }
664 ret_val = e1e_wphy(hw, I82577_PHY_CTRL_2, phy_data);
665 if (ret_val)
666 return ret_val;
667
668 return e1000_set_master_slave_mode(hw);
669}
670
671/**
672 * e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link
673 * @hw: pointer to the HW structure
674 *
675 * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
676 * and downshift values are set also.
677 **/
678s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
679{
680 struct e1000_phy_info *phy = &hw->phy;
681 s32 ret_val;
682 u16 phy_data;
683
684 /* Enable CRS on Tx. This must be set for half-duplex operation. */
685 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
686 if (ret_val)
687 return ret_val;
688
689 /* For BM PHY this bit is downshift enable */
690 if (phy->type != e1000_phy_bm)
691 phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
692
693 /* Options:
694 * MDI/MDI-X = 0 (default)
695 * 0 - Auto for all speeds
696 * 1 - MDI mode
697 * 2 - MDI-X mode
698 * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
699 */
700 phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
701
702 switch (phy->mdix) {
703 case 1:
704 phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
705 break;
706 case 2:
707 phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
708 break;
709 case 3:
710 phy_data |= M88E1000_PSCR_AUTO_X_1000T;
711 break;
712 case 0:
713 default:
714 phy_data |= M88E1000_PSCR_AUTO_X_MODE;
715 break;
716 }
717
718 /* Options:
719 * disable_polarity_correction = 0 (default)
720 * Automatic Correction for Reversed Cable Polarity
721 * 0 - Disabled
722 * 1 - Enabled
723 */
724 phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
725 if (phy->disable_polarity_correction)
726 phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
727
728 /* Enable downshift on BM (disabled by default) */
729 if (phy->type == e1000_phy_bm) {
730 /* For 82574/82583, first disable then enable downshift */
731 if (phy->id == BME1000_E_PHY_ID_R2) {
732 phy_data &= ~BME1000_PSCR_ENABLE_DOWNSHIFT;
733 ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL,
734 phy_data);
735 if (ret_val)
736 return ret_val;
737 /* Commit the changes. */
738 ret_val = phy->ops.commit(hw);
739 if (ret_val) {
740 e_dbg("Error committing the PHY changes\n");
741 return ret_val;
742 }
743 }
744
745 phy_data |= BME1000_PSCR_ENABLE_DOWNSHIFT;
746 }
747
748 ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
749 if (ret_val)
750 return ret_val;
751
752 if ((phy->type == e1000_phy_m88) &&
753 (phy->revision < E1000_REVISION_4) &&
754 (phy->id != BME1000_E_PHY_ID_R2)) {
755 /* Force TX_CLK in the Extended PHY Specific Control Register
756 * to 25MHz clock.
757 */
758 ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
759 if (ret_val)
760 return ret_val;
761
762 phy_data |= M88E1000_EPSCR_TX_CLK_25;
763
764 if ((phy->revision == 2) && (phy->id == M88E1111_I_PHY_ID)) {
765 /* 82573L PHY - set the downshift counter to 5x. */
766 phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
767 phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
768 } else {
769 /* Configure Master and Slave downshift values */
770 phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
771 M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
772 phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
773 M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
774 }
775 ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
776 if (ret_val)
777 return ret_val;
778 }
779
780 if ((phy->type == e1000_phy_bm) && (phy->id == BME1000_E_PHY_ID_R2)) {
781 /* Set PHY page 0, register 29 to 0x0003 */
782 ret_val = e1e_wphy(hw, 29, 0x0003);
783 if (ret_val)
784 return ret_val;
785
786 /* Set PHY page 0, register 30 to 0x0000 */
787 ret_val = e1e_wphy(hw, 30, 0x0000);
788 if (ret_val)
789 return ret_val;
790 }
791
792 /* Commit the changes. */
793 if (phy->ops.commit) {
794 ret_val = phy->ops.commit(hw);
795 if (ret_val) {
796 e_dbg("Error committing the PHY changes\n");
797 return ret_val;
798 }
799 }
800
801 if (phy->type == e1000_phy_82578) {
802 ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
803 if (ret_val)
804 return ret_val;
805
806 /* 82578 PHY - set the downshift count to 1x. */
807 phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
808 phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
809 ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
810 if (ret_val)
811 return ret_val;
812 }
813
814 return 0;
815}
816
817/**
818 * e1000e_copper_link_setup_igp - Setup igp PHY's for copper link
819 * @hw: pointer to the HW structure
820 *
821 * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
822 * igp PHY's.
823 **/
824s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
825{
826 struct e1000_phy_info *phy = &hw->phy;
827 s32 ret_val;
828 u16 data;
829
830 ret_val = e1000_phy_hw_reset(hw);
831 if (ret_val) {
832 e_dbg("Error resetting the PHY.\n");
833 return ret_val;
834 }
835
836 /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
837 * timeout issues when LFS is enabled.
838 */
839 msleep(100);
840
841 /* disable lplu d0 during driver init */
842 if (hw->phy.ops.set_d0_lplu_state) {
843 ret_val = hw->phy.ops.set_d0_lplu_state(hw, false);
844 if (ret_val) {
845 e_dbg("Error Disabling LPLU D0\n");
846 return ret_val;
847 }
848 }
849 /* Configure mdi-mdix settings */
850 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data);
851 if (ret_val)
852 return ret_val;
853
854 data &= ~IGP01E1000_PSCR_AUTO_MDIX;
855
856 switch (phy->mdix) {
857 case 1:
858 data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
859 break;
860 case 2:
861 data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
862 break;
863 case 0:
864 default:
865 data |= IGP01E1000_PSCR_AUTO_MDIX;
866 break;
867 }
868 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, data);
869 if (ret_val)
870 return ret_val;
871
872 /* set auto-master slave resolution settings */
873 if (hw->mac.autoneg) {
874 /* when autonegotiation advertisement is only 1000Mbps then we
875 * should disable SmartSpeed and enable Auto MasterSlave
876 * resolution as hardware default.
877 */
878 if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
879 /* Disable SmartSpeed */
880 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
881 &data);
882 if (ret_val)
883 return ret_val;
884
885 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
886 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
887 data);
888 if (ret_val)
889 return ret_val;
890
891 /* Set auto Master/Slave resolution process */
892 ret_val = e1e_rphy(hw, MII_CTRL1000, &data);
893 if (ret_val)
894 return ret_val;
895
896 data &= ~CTL1000_ENABLE_MASTER;
897 ret_val = e1e_wphy(hw, MII_CTRL1000, data);
898 if (ret_val)
899 return ret_val;
900 }
901
902 ret_val = e1000_set_master_slave_mode(hw);
903 }
904
905 return ret_val;
906}
907
908/**
909 * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation
910 * @hw: pointer to the HW structure
911 *
912 * Reads the MII auto-neg advertisement register and/or the 1000T control
913 * register and if the PHY is already setup for auto-negotiation, then
914 * return successful. Otherwise, setup advertisement and flow control to
915 * the appropriate values for the wanted auto-negotiation.
916 **/
917static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
918{
919 struct e1000_phy_info *phy = &hw->phy;
920 s32 ret_val;
921 u16 mii_autoneg_adv_reg;
922 u16 mii_1000t_ctrl_reg = 0;
923
924 phy->autoneg_advertised &= phy->autoneg_mask;
925
926 /* Read the MII Auto-Neg Advertisement Register (Address 4). */
927 ret_val = e1e_rphy(hw, MII_ADVERTISE, &mii_autoneg_adv_reg);
928 if (ret_val)
929 return ret_val;
930
931 if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
932 /* Read the MII 1000Base-T Control Register (Address 9). */
933 ret_val = e1e_rphy(hw, MII_CTRL1000, &mii_1000t_ctrl_reg);
934 if (ret_val)
935 return ret_val;
936 }
937
938 /* Need to parse both autoneg_advertised and fc and set up
939 * the appropriate PHY registers. First we will parse for
940 * autoneg_advertised software override. Since we can advertise
941 * a plethora of combinations, we need to check each bit
942 * individually.
943 */
944
945 /* First we clear all the 10/100 mb speed bits in the Auto-Neg
946 * Advertisement Register (Address 4) and the 1000 mb speed bits in
947 * the 1000Base-T Control Register (Address 9).
948 */
949 mii_autoneg_adv_reg &= ~(ADVERTISE_100FULL |
950 ADVERTISE_100HALF |
951 ADVERTISE_10FULL | ADVERTISE_10HALF);
952 mii_1000t_ctrl_reg &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
953
954 e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
955
956 /* Do we want to advertise 10 Mb Half Duplex? */
957 if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
958 e_dbg("Advertise 10mb Half duplex\n");
959 mii_autoneg_adv_reg |= ADVERTISE_10HALF;
960 }
961
962 /* Do we want to advertise 10 Mb Full Duplex? */
963 if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
964 e_dbg("Advertise 10mb Full duplex\n");
965 mii_autoneg_adv_reg |= ADVERTISE_10FULL;
966 }
967
968 /* Do we want to advertise 100 Mb Half Duplex? */
969 if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
970 e_dbg("Advertise 100mb Half duplex\n");
971 mii_autoneg_adv_reg |= ADVERTISE_100HALF;
972 }
973
974 /* Do we want to advertise 100 Mb Full Duplex? */
975 if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
976 e_dbg("Advertise 100mb Full duplex\n");
977 mii_autoneg_adv_reg |= ADVERTISE_100FULL;
978 }
979
980 /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
981 if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
982 e_dbg("Advertise 1000mb Half duplex request denied!\n");
983
984 /* Do we want to advertise 1000 Mb Full Duplex? */
985 if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
986 e_dbg("Advertise 1000mb Full duplex\n");
987 mii_1000t_ctrl_reg |= ADVERTISE_1000FULL;
988 }
989
990 /* Check for a software override of the flow control settings, and
991 * setup the PHY advertisement registers accordingly. If
992 * auto-negotiation is enabled, then software will have to set the
993 * "PAUSE" bits to the correct value in the Auto-Negotiation
994 * Advertisement Register (MII_ADVERTISE) and re-start auto-
995 * negotiation.
996 *
997 * The possible values of the "fc" parameter are:
998 * 0: Flow control is completely disabled
999 * 1: Rx flow control is enabled (we can receive pause frames
1000 * but not send pause frames).
1001 * 2: Tx flow control is enabled (we can send pause frames
1002 * but we do not support receiving pause frames).
1003 * 3: Both Rx and Tx flow control (symmetric) are enabled.
1004 * other: No software override. The flow control configuration
1005 * in the EEPROM is used.
1006 */
1007 switch (hw->fc.current_mode) {
1008 case e1000_fc_none:
1009 /* Flow control (Rx & Tx) is completely disabled by a
1010 * software over-ride.
1011 */
1012 mii_autoneg_adv_reg &=
1013 ~(ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
1014 break;
1015 case e1000_fc_rx_pause:
1016 /* Rx Flow control is enabled, and Tx Flow control is
1017 * disabled, by a software over-ride.
1018 *
1019 * Since there really isn't a way to advertise that we are
1020 * capable of Rx Pause ONLY, we will advertise that we
1021 * support both symmetric and asymmetric Rx PAUSE. Later
1022 * (in e1000e_config_fc_after_link_up) we will disable the
1023 * hw's ability to send PAUSE frames.
1024 */
1025 mii_autoneg_adv_reg |=
1026 (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
1027 break;
1028 case e1000_fc_tx_pause:
1029 /* Tx Flow control is enabled, and Rx Flow control is
1030 * disabled, by a software over-ride.
1031 */
1032 mii_autoneg_adv_reg |= ADVERTISE_PAUSE_ASYM;
1033 mii_autoneg_adv_reg &= ~ADVERTISE_PAUSE_CAP;
1034 break;
1035 case e1000_fc_full:
1036 /* Flow control (both Rx and Tx) is enabled by a software
1037 * over-ride.
1038 */
1039 mii_autoneg_adv_reg |=
1040 (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
1041 break;
1042 default:
1043 e_dbg("Flow control param set incorrectly\n");
1044 return -E1000_ERR_CONFIG;
1045 }
1046
1047 ret_val = e1e_wphy(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
1048 if (ret_val)
1049 return ret_val;
1050
1051 e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
1052
1053 if (phy->autoneg_mask & ADVERTISE_1000_FULL)
1054 ret_val = e1e_wphy(hw, MII_CTRL1000, mii_1000t_ctrl_reg);
1055
1056 return ret_val;
1057}
1058
1059/**
1060 * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link
1061 * @hw: pointer to the HW structure
1062 *
1063 * Performs initial bounds checking on autoneg advertisement parameter, then
1064 * configure to advertise the full capability. Setup the PHY to autoneg
1065 * and restart the negotiation process between the link partner. If
1066 * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
1067 **/
1068static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
1069{
1070 struct e1000_phy_info *phy = &hw->phy;
1071 s32 ret_val;
1072 u16 phy_ctrl;
1073
1074 /* Perform some bounds checking on the autoneg advertisement
1075 * parameter.
1076 */
1077 phy->autoneg_advertised &= phy->autoneg_mask;
1078
1079 /* If autoneg_advertised is zero, we assume it was not defaulted
1080 * by the calling code so we set to advertise full capability.
1081 */
1082 if (!phy->autoneg_advertised)
1083 phy->autoneg_advertised = phy->autoneg_mask;
1084
1085 e_dbg("Reconfiguring auto-neg advertisement params\n");
1086 ret_val = e1000_phy_setup_autoneg(hw);
1087 if (ret_val) {
1088 e_dbg("Error Setting up Auto-Negotiation\n");
1089 return ret_val;
1090 }
1091 e_dbg("Restarting Auto-Neg\n");
1092
1093 /* Restart auto-negotiation by setting the Auto Neg Enable bit and
1094 * the Auto Neg Restart bit in the PHY control register.
1095 */
1096 ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl);
1097 if (ret_val)
1098 return ret_val;
1099
1100 phy_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART);
1101 ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl);
1102 if (ret_val)
1103 return ret_val;
1104
1105 /* Does the user want to wait for Auto-Neg to complete here, or
1106 * check at a later time (for example, callback routine).
1107 */
1108 if (phy->autoneg_wait_to_complete) {
1109 ret_val = e1000_wait_autoneg(hw);
1110 if (ret_val) {
1111 e_dbg("Error while waiting for autoneg to complete\n");
1112 return ret_val;
1113 }
1114 }
1115
1116 hw->mac.get_link_status = true;
1117
1118 return ret_val;
1119}
1120
1121/**
1122 * e1000e_setup_copper_link - Configure copper link settings
1123 * @hw: pointer to the HW structure
1124 *
1125 * Calls the appropriate function to configure the link for auto-neg or forced
1126 * speed and duplex. Then we check for link, once link is established calls
1127 * to configure collision distance and flow control are called. If link is
1128 * not established, we return -E1000_ERR_PHY (-2).
1129 **/
1130s32 e1000e_setup_copper_link(struct e1000_hw *hw)
1131{
1132 s32 ret_val;
1133 bool link;
1134
1135 if (hw->mac.autoneg) {
1136 /* Setup autoneg and flow control advertisement and perform
1137 * autonegotiation.
1138 */
1139 ret_val = e1000_copper_link_autoneg(hw);
1140 if (ret_val)
1141 return ret_val;
1142 } else {
1143 /* PHY will be set to 10H, 10F, 100H or 100F
1144 * depending on user settings.
1145 */
1146 e_dbg("Forcing Speed and Duplex\n");
1147 ret_val = hw->phy.ops.force_speed_duplex(hw);
1148 if (ret_val) {
1149 e_dbg("Error Forcing Speed and Duplex\n");
1150 return ret_val;
1151 }
1152 }
1153
1154 /* Check link status. Wait up to 100 microseconds for link to become
1155 * valid.
1156 */
1157 ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
1158 &link);
1159 if (ret_val)
1160 return ret_val;
1161
1162 if (link) {
1163 e_dbg("Valid link established!!!\n");
1164 hw->mac.ops.config_collision_dist(hw);
1165 ret_val = e1000e_config_fc_after_link_up(hw);
1166 } else {
1167 e_dbg("Unable to establish link!!!\n");
1168 }
1169
1170 return ret_val;
1171}
1172
1173/**
1174 * e1000e_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
1175 * @hw: pointer to the HW structure
1176 *
1177 * Calls the PHY setup function to force speed and duplex. Clears the
1178 * auto-crossover to force MDI manually. Waits for link and returns
1179 * successful if link up is successful, else -E1000_ERR_PHY (-2).
1180 **/
1181s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
1182{
1183 struct e1000_phy_info *phy = &hw->phy;
1184 s32 ret_val;
1185 u16 phy_data;
1186 bool link;
1187
1188 ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
1189 if (ret_val)
1190 return ret_val;
1191
1192 e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
1193
1194 ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
1195 if (ret_val)
1196 return ret_val;
1197
1198 /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
1199 * forced whenever speed and duplex are forced.
1200 */
1201 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
1202 if (ret_val)
1203 return ret_val;
1204
1205 phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
1206 phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
1207
1208 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
1209 if (ret_val)
1210 return ret_val;
1211
1212 e_dbg("IGP PSCR: %X\n", phy_data);
1213
1214 udelay(1);
1215
1216 if (phy->autoneg_wait_to_complete) {
1217 e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
1218
1219 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1220 100000, &link);
1221 if (ret_val)
1222 return ret_val;
1223
1224 if (!link)
1225 e_dbg("Link taking longer than expected.\n");
1226
1227 /* Try once more */
1228 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1229 100000, &link);
1230 }
1231
1232 return ret_val;
1233}
1234
1235/**
1236 * e1000e_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
1237 * @hw: pointer to the HW structure
1238 *
1239 * Calls the PHY setup function to force speed and duplex. Clears the
1240 * auto-crossover to force MDI manually. Resets the PHY to commit the
1241 * changes. If time expires while waiting for link up, we reset the DSP.
1242 * After reset, TX_CLK and CRS on Tx must be set. Return successful upon
1243 * successful completion, else return corresponding error code.
1244 **/
1245s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
1246{
1247 struct e1000_phy_info *phy = &hw->phy;
1248 s32 ret_val;
1249 u16 phy_data;
1250 bool link;
1251
1252 /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
1253 * forced whenever speed and duplex are forced.
1254 */
1255 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
1256 if (ret_val)
1257 return ret_val;
1258
1259 phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
1260 ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
1261 if (ret_val)
1262 return ret_val;
1263
1264 e_dbg("M88E1000 PSCR: %X\n", phy_data);
1265
1266 ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
1267 if (ret_val)
1268 return ret_val;
1269
1270 e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
1271
1272 ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
1273 if (ret_val)
1274 return ret_val;
1275
1276 /* Reset the phy to commit changes. */
1277 if (hw->phy.ops.commit) {
1278 ret_val = hw->phy.ops.commit(hw);
1279 if (ret_val)
1280 return ret_val;
1281 }
1282
1283 if (phy->autoneg_wait_to_complete) {
1284 e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
1285
1286 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1287 100000, &link);
1288 if (ret_val)
1289 return ret_val;
1290
1291 if (!link) {
1292 if (hw->phy.type != e1000_phy_m88) {
1293 e_dbg("Link taking longer than expected.\n");
1294 } else {
1295 /* We didn't get link.
1296 * Reset the DSP and cross our fingers.
1297 */
1298 ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
1299 0x001d);
1300 if (ret_val)
1301 return ret_val;
1302 ret_val = e1000e_phy_reset_dsp(hw);
1303 if (ret_val)
1304 return ret_val;
1305 }
1306 }
1307
1308 /* Try once more */
1309 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1310 100000, &link);
1311 if (ret_val)
1312 return ret_val;
1313 }
1314
1315 if (hw->phy.type != e1000_phy_m88)
1316 return 0;
1317
1318 ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
1319 if (ret_val)
1320 return ret_val;
1321
1322 /* Resetting the phy means we need to re-force TX_CLK in the
1323 * Extended PHY Specific Control Register to 25MHz clock from
1324 * the reset value of 2.5MHz.
1325 */
1326 phy_data |= M88E1000_EPSCR_TX_CLK_25;
1327 ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
1328 if (ret_val)
1329 return ret_val;
1330
1331 /* In addition, we must re-enable CRS on Tx for both half and full
1332 * duplex.
1333 */
1334 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
1335 if (ret_val)
1336 return ret_val;
1337
1338 phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
1339 ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
1340
1341 return ret_val;
1342}
1343
1344/**
1345 * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
1346 * @hw: pointer to the HW structure
1347 *
1348 * Forces the speed and duplex settings of the PHY.
1349 * This is a function pointer entry point only called by
1350 * PHY setup routines.
1351 **/
1352s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
1353{
1354 struct e1000_phy_info *phy = &hw->phy;
1355 s32 ret_val;
1356 u16 data;
1357 bool link;
1358
1359 ret_val = e1e_rphy(hw, MII_BMCR, &data);
1360 if (ret_val)
1361 return ret_val;
1362
1363 e1000e_phy_force_speed_duplex_setup(hw, &data);
1364
1365 ret_val = e1e_wphy(hw, MII_BMCR, data);
1366 if (ret_val)
1367 return ret_val;
1368
1369 /* Disable MDI-X support for 10/100 */
1370 ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
1371 if (ret_val)
1372 return ret_val;
1373
1374 data &= ~IFE_PMC_AUTO_MDIX;
1375 data &= ~IFE_PMC_FORCE_MDIX;
1376
1377 ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
1378 if (ret_val)
1379 return ret_val;
1380
1381 e_dbg("IFE PMC: %X\n", data);
1382
1383 udelay(1);
1384
1385 if (phy->autoneg_wait_to_complete) {
1386 e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
1387
1388 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1389 100000, &link);
1390 if (ret_val)
1391 return ret_val;
1392
1393 if (!link)
1394 e_dbg("Link taking longer than expected.\n");
1395
1396 /* Try once more */
1397 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
1398 100000, &link);
1399 if (ret_val)
1400 return ret_val;
1401 }
1402
1403 return 0;
1404}
1405
1406/**
1407 * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
1408 * @hw: pointer to the HW structure
1409 * @phy_ctrl: pointer to current value of MII_BMCR
1410 *
1411 * Forces speed and duplex on the PHY by doing the following: disable flow
1412 * control, force speed/duplex on the MAC, disable auto speed detection,
1413 * disable auto-negotiation, configure duplex, configure speed, configure
1414 * the collision distance, write configuration to CTRL register. The
1415 * caller must write to the MII_BMCR register for these settings to
1416 * take affect.
1417 **/
1418void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
1419{
1420 struct e1000_mac_info *mac = &hw->mac;
1421 u32 ctrl;
1422
1423 /* Turn off flow control when forcing speed/duplex */
1424 hw->fc.current_mode = e1000_fc_none;
1425
1426 /* Force speed/duplex on the mac */
1427 ctrl = er32(CTRL);
1428 ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
1429 ctrl &= ~E1000_CTRL_SPD_SEL;
1430
1431 /* Disable Auto Speed Detection */
1432 ctrl &= ~E1000_CTRL_ASDE;
1433
1434 /* Disable autoneg on the phy */
1435 *phy_ctrl &= ~BMCR_ANENABLE;
1436
1437 /* Forcing Full or Half Duplex? */
1438 if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
1439 ctrl &= ~E1000_CTRL_FD;
1440 *phy_ctrl &= ~BMCR_FULLDPLX;
1441 e_dbg("Half Duplex\n");
1442 } else {
1443 ctrl |= E1000_CTRL_FD;
1444 *phy_ctrl |= BMCR_FULLDPLX;
1445 e_dbg("Full Duplex\n");
1446 }
1447
1448 /* Forcing 10mb or 100mb? */
1449 if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
1450 ctrl |= E1000_CTRL_SPD_100;
1451 *phy_ctrl |= BMCR_SPEED100;
1452 *phy_ctrl &= ~BMCR_SPEED1000;
1453 e_dbg("Forcing 100mb\n");
1454 } else {
1455 ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
1456 *phy_ctrl &= ~(BMCR_SPEED1000 | BMCR_SPEED100);
1457 e_dbg("Forcing 10mb\n");
1458 }
1459
1460 hw->mac.ops.config_collision_dist(hw);
1461
1462 ew32(CTRL, ctrl);
1463}
1464
1465/**
1466 * e1000e_set_d3_lplu_state - Sets low power link up state for D3
1467 * @hw: pointer to the HW structure
1468 * @active: boolean used to enable/disable lplu
1469 *
1470 * Success returns 0, Failure returns 1
1471 *
1472 * The low power link up (lplu) state is set to the power management level D3
1473 * and SmartSpeed is disabled when active is true, else clear lplu for D3
1474 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
1475 * is used during Dx states where the power conservation is most important.
1476 * During driver activity, SmartSpeed should be enabled so performance is
1477 * maintained.
1478 **/
1479s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
1480{
1481 struct e1000_phy_info *phy = &hw->phy;
1482 s32 ret_val;
1483 u16 data;
1484
1485 ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
1486 if (ret_val)
1487 return ret_val;
1488
1489 if (!active) {
1490 data &= ~IGP02E1000_PM_D3_LPLU;
1491 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
1492 if (ret_val)
1493 return ret_val;
1494 /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
1495 * during Dx states where the power conservation is most
1496 * important. During driver activity we should enable
1497 * SmartSpeed, so performance is maintained.
1498 */
1499 if (phy->smart_speed == e1000_smart_speed_on) {
1500 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
1501 &data);
1502 if (ret_val)
1503 return ret_val;
1504
1505 data |= IGP01E1000_PSCFR_SMART_SPEED;
1506 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
1507 data);
1508 if (ret_val)
1509 return ret_val;
1510 } else if (phy->smart_speed == e1000_smart_speed_off) {
1511 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
1512 &data);
1513 if (ret_val)
1514 return ret_val;
1515
1516 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
1517 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
1518 data);
1519 if (ret_val)
1520 return ret_val;
1521 }
1522 } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
1523 (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
1524 (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
1525 data |= IGP02E1000_PM_D3_LPLU;
1526 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
1527 if (ret_val)
1528 return ret_val;
1529
1530 /* When LPLU is enabled, we should disable SmartSpeed */
1531 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
1532 if (ret_val)
1533 return ret_val;
1534
1535 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
1536 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
1537 }
1538
1539 return ret_val;
1540}
1541
1542/**
1543 * e1000e_check_downshift - Checks whether a downshift in speed occurred
1544 * @hw: pointer to the HW structure
1545 *
1546 * Success returns 0, Failure returns 1
1547 *
1548 * A downshift is detected by querying the PHY link health.
1549 **/
1550s32 e1000e_check_downshift(struct e1000_hw *hw)
1551{
1552 struct e1000_phy_info *phy = &hw->phy;
1553 s32 ret_val;
1554 u16 phy_data, offset, mask;
1555
1556 switch (phy->type) {
1557 case e1000_phy_m88:
1558 case e1000_phy_gg82563:
1559 case e1000_phy_bm:
1560 case e1000_phy_82578:
1561 offset = M88E1000_PHY_SPEC_STATUS;
1562 mask = M88E1000_PSSR_DOWNSHIFT;
1563 break;
1564 case e1000_phy_igp_2:
1565 case e1000_phy_igp_3:
1566 offset = IGP01E1000_PHY_LINK_HEALTH;
1567 mask = IGP01E1000_PLHR_SS_DOWNGRADE;
1568 break;
1569 default:
1570 /* speed downshift not supported */
1571 phy->speed_downgraded = false;
1572 return 0;
1573 }
1574
1575 ret_val = e1e_rphy(hw, offset, &phy_data);
1576
1577 if (!ret_val)
1578 phy->speed_downgraded = !!(phy_data & mask);
1579
1580 return ret_val;
1581}
1582
1583/**
1584 * e1000_check_polarity_m88 - Checks the polarity.
1585 * @hw: pointer to the HW structure
1586 *
1587 * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
1588 *
1589 * Polarity is determined based on the PHY specific status register.
1590 **/
1591s32 e1000_check_polarity_m88(struct e1000_hw *hw)
1592{
1593 struct e1000_phy_info *phy = &hw->phy;
1594 s32 ret_val;
1595 u16 data;
1596
1597 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &data);
1598
1599 if (!ret_val)
1600 phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY)
1601 ? e1000_rev_polarity_reversed
1602 : e1000_rev_polarity_normal);
1603
1604 return ret_val;
1605}
1606
1607/**
1608 * e1000_check_polarity_igp - Checks the polarity.
1609 * @hw: pointer to the HW structure
1610 *
1611 * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
1612 *
1613 * Polarity is determined based on the PHY port status register, and the
1614 * current speed (since there is no polarity at 100Mbps).
1615 **/
1616s32 e1000_check_polarity_igp(struct e1000_hw *hw)
1617{
1618 struct e1000_phy_info *phy = &hw->phy;
1619 s32 ret_val;
1620 u16 data, offset, mask;
1621
1622 /* Polarity is determined based on the speed of
1623 * our connection.
1624 */
1625 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
1626 if (ret_val)
1627 return ret_val;
1628
1629 if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
1630 IGP01E1000_PSSR_SPEED_1000MBPS) {
1631 offset = IGP01E1000_PHY_PCS_INIT_REG;
1632 mask = IGP01E1000_PHY_POLARITY_MASK;
1633 } else {
1634 /* This really only applies to 10Mbps since
1635 * there is no polarity for 100Mbps (always 0).
1636 */
1637 offset = IGP01E1000_PHY_PORT_STATUS;
1638 mask = IGP01E1000_PSSR_POLARITY_REVERSED;
1639 }
1640
1641 ret_val = e1e_rphy(hw, offset, &data);
1642
1643 if (!ret_val)
1644 phy->cable_polarity = ((data & mask)
1645 ? e1000_rev_polarity_reversed
1646 : e1000_rev_polarity_normal);
1647
1648 return ret_val;
1649}
1650
1651/**
1652 * e1000_check_polarity_ife - Check cable polarity for IFE PHY
1653 * @hw: pointer to the HW structure
1654 *
1655 * Polarity is determined on the polarity reversal feature being enabled.
1656 **/
1657s32 e1000_check_polarity_ife(struct e1000_hw *hw)
1658{
1659 struct e1000_phy_info *phy = &hw->phy;
1660 s32 ret_val;
1661 u16 phy_data, offset, mask;
1662
1663 /* Polarity is determined based on the reversal feature being enabled.
1664 */
1665 if (phy->polarity_correction) {
1666 offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
1667 mask = IFE_PESC_POLARITY_REVERSED;
1668 } else {
1669 offset = IFE_PHY_SPECIAL_CONTROL;
1670 mask = IFE_PSC_FORCE_POLARITY;
1671 }
1672
1673 ret_val = e1e_rphy(hw, offset, &phy_data);
1674
1675 if (!ret_val)
1676 phy->cable_polarity = ((phy_data & mask)
1677 ? e1000_rev_polarity_reversed
1678 : e1000_rev_polarity_normal);
1679
1680 return ret_val;
1681}
1682
1683/**
1684 * e1000_wait_autoneg - Wait for auto-neg completion
1685 * @hw: pointer to the HW structure
1686 *
1687 * Waits for auto-negotiation to complete or for the auto-negotiation time
1688 * limit to expire, which ever happens first.
1689 **/
1690static s32 e1000_wait_autoneg(struct e1000_hw *hw)
1691{
1692 s32 ret_val = 0;
1693 u16 i, phy_status;
1694
1695 /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
1696 for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
1697 ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
1698 if (ret_val)
1699 break;
1700 ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
1701 if (ret_val)
1702 break;
1703 if (phy_status & BMSR_ANEGCOMPLETE)
1704 break;
1705 msleep(100);
1706 }
1707
1708 /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
1709 * has completed.
1710 */
1711 return ret_val;
1712}
1713
1714/**
1715 * e1000e_phy_has_link_generic - Polls PHY for link
1716 * @hw: pointer to the HW structure
1717 * @iterations: number of times to poll for link
1718 * @usec_interval: delay between polling attempts
1719 * @success: pointer to whether polling was successful or not
1720 *
1721 * Polls the PHY status register for link, 'iterations' number of times.
1722 **/
1723s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
1724 u32 usec_interval, bool *success)
1725{
1726 s32 ret_val = 0;
1727 u16 i, phy_status;
1728
1729 *success = false;
1730 for (i = 0; i < iterations; i++) {
1731 /* Some PHYs require the MII_BMSR register to be read
1732 * twice due to the link bit being sticky. No harm doing
1733 * it across the board.
1734 */
1735 ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
1736 if (ret_val) {
1737 /* If the first read fails, another entity may have
1738 * ownership of the resources, wait and try again to
1739 * see if they have relinquished the resources yet.
1740 */
1741 if (usec_interval >= 1000)
1742 msleep(usec_interval / 1000);
1743 else
1744 udelay(usec_interval);
1745 }
1746 ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
1747 if (ret_val)
1748 break;
1749 if (phy_status & BMSR_LSTATUS) {
1750 *success = true;
1751 break;
1752 }
1753 if (usec_interval >= 1000)
1754 msleep(usec_interval / 1000);
1755 else
1756 udelay(usec_interval);
1757 }
1758
1759 return ret_val;
1760}
1761
1762/**
1763 * e1000e_get_cable_length_m88 - Determine cable length for m88 PHY
1764 * @hw: pointer to the HW structure
1765 *
1766 * Reads the PHY specific status register to retrieve the cable length
1767 * information. The cable length is determined by averaging the minimum and
1768 * maximum values to get the "average" cable length. The m88 PHY has four
1769 * possible cable length values, which are:
1770 * Register Value Cable Length
1771 * 0 < 50 meters
1772 * 1 50 - 80 meters
1773 * 2 80 - 110 meters
1774 * 3 110 - 140 meters
1775 * 4 > 140 meters
1776 **/
1777s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
1778{
1779 struct e1000_phy_info *phy = &hw->phy;
1780 s32 ret_val;
1781 u16 phy_data, index;
1782
1783 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
1784 if (ret_val)
1785 return ret_val;
1786
1787 index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
1788 M88E1000_PSSR_CABLE_LENGTH_SHIFT);
1789
1790 if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1)
1791 return -E1000_ERR_PHY;
1792
1793 phy->min_cable_length = e1000_m88_cable_length_table[index];
1794 phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
1795
1796 phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
1797
1798 return 0;
1799}
1800
1801/**
1802 * e1000e_get_cable_length_igp_2 - Determine cable length for igp2 PHY
1803 * @hw: pointer to the HW structure
1804 *
1805 * The automatic gain control (agc) normalizes the amplitude of the
1806 * received signal, adjusting for the attenuation produced by the
1807 * cable. By reading the AGC registers, which represent the
1808 * combination of coarse and fine gain value, the value can be put
1809 * into a lookup table to obtain the approximate cable length
1810 * for each channel.
1811 **/
1812s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
1813{
1814 struct e1000_phy_info *phy = &hw->phy;
1815 s32 ret_val;
1816 u16 phy_data, i, agc_value = 0;
1817 u16 cur_agc_index, max_agc_index = 0;
1818 u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
1819 static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
1820 IGP02E1000_PHY_AGC_A,
1821 IGP02E1000_PHY_AGC_B,
1822 IGP02E1000_PHY_AGC_C,
1823 IGP02E1000_PHY_AGC_D
1824 };
1825
1826 /* Read the AGC registers for all channels */
1827 for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
1828 ret_val = e1e_rphy(hw, agc_reg_array[i], &phy_data);
1829 if (ret_val)
1830 return ret_val;
1831
1832 /* Getting bits 15:9, which represent the combination of
1833 * coarse and fine gain values. The result is a number
1834 * that can be put into the lookup table to obtain the
1835 * approximate cable length.
1836 */
1837 cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
1838 IGP02E1000_AGC_LENGTH_MASK);
1839
1840 /* Array index bound check. */
1841 if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
1842 (cur_agc_index == 0))
1843 return -E1000_ERR_PHY;
1844
1845 /* Remove min & max AGC values from calculation. */
1846 if (e1000_igp_2_cable_length_table[min_agc_index] >
1847 e1000_igp_2_cable_length_table[cur_agc_index])
1848 min_agc_index = cur_agc_index;
1849 if (e1000_igp_2_cable_length_table[max_agc_index] <
1850 e1000_igp_2_cable_length_table[cur_agc_index])
1851 max_agc_index = cur_agc_index;
1852
1853 agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
1854 }
1855
1856 agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
1857 e1000_igp_2_cable_length_table[max_agc_index]);
1858 agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
1859
1860 /* Calculate cable length with the error range of +/- 10 meters. */
1861 phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
1862 (agc_value - IGP02E1000_AGC_RANGE) : 0);
1863 phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
1864
1865 phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
1866
1867 return 0;
1868}
1869
1870/**
1871 * e1000e_get_phy_info_m88 - Retrieve PHY information
1872 * @hw: pointer to the HW structure
1873 *
1874 * Valid for only copper links. Read the PHY status register (sticky read)
1875 * to verify that link is up. Read the PHY special control register to
1876 * determine the polarity and 10base-T extended distance. Read the PHY
1877 * special status register to determine MDI/MDIx and current speed. If
1878 * speed is 1000, then determine cable length, local and remote receiver.
1879 **/
1880s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
1881{
1882 struct e1000_phy_info *phy = &hw->phy;
1883 s32 ret_val;
1884 u16 phy_data;
1885 bool link;
1886
1887 if (phy->media_type != e1000_media_type_copper) {
1888 e_dbg("Phy info is only valid for copper media\n");
1889 return -E1000_ERR_CONFIG;
1890 }
1891
1892 ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
1893 if (ret_val)
1894 return ret_val;
1895
1896 if (!link) {
1897 e_dbg("Phy info is only valid if link is up\n");
1898 return -E1000_ERR_CONFIG;
1899 }
1900
1901 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
1902 if (ret_val)
1903 return ret_val;
1904
1905 phy->polarity_correction = !!(phy_data &
1906 M88E1000_PSCR_POLARITY_REVERSAL);
1907
1908 ret_val = e1000_check_polarity_m88(hw);
1909 if (ret_val)
1910 return ret_val;
1911
1912 ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
1913 if (ret_val)
1914 return ret_val;
1915
1916 phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX);
1917
1918 if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
1919 ret_val = hw->phy.ops.get_cable_length(hw);
1920 if (ret_val)
1921 return ret_val;
1922
1923 ret_val = e1e_rphy(hw, MII_STAT1000, &phy_data);
1924 if (ret_val)
1925 return ret_val;
1926
1927 phy->local_rx = (phy_data & LPA_1000LOCALRXOK)
1928 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
1929
1930 phy->remote_rx = (phy_data & LPA_1000REMRXOK)
1931 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
1932 } else {
1933 /* Set values to "undefined" */
1934 phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
1935 phy->local_rx = e1000_1000t_rx_status_undefined;
1936 phy->remote_rx = e1000_1000t_rx_status_undefined;
1937 }
1938
1939 return ret_val;
1940}
1941
1942/**
1943 * e1000e_get_phy_info_igp - Retrieve igp PHY information
1944 * @hw: pointer to the HW structure
1945 *
1946 * Read PHY status to determine if link is up. If link is up, then
1947 * set/determine 10base-T extended distance and polarity correction. Read
1948 * PHY port status to determine MDI/MDIx and speed. Based on the speed,
1949 * determine on the cable length, local and remote receiver.
1950 **/
1951s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
1952{
1953 struct e1000_phy_info *phy = &hw->phy;
1954 s32 ret_val;
1955 u16 data;
1956 bool link;
1957
1958 ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
1959 if (ret_val)
1960 return ret_val;
1961
1962 if (!link) {
1963 e_dbg("Phy info is only valid if link is up\n");
1964 return -E1000_ERR_CONFIG;
1965 }
1966
1967 phy->polarity_correction = true;
1968
1969 ret_val = e1000_check_polarity_igp(hw);
1970 if (ret_val)
1971 return ret_val;
1972
1973 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
1974 if (ret_val)
1975 return ret_val;
1976
1977 phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX);
1978
1979 if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
1980 IGP01E1000_PSSR_SPEED_1000MBPS) {
1981 ret_val = phy->ops.get_cable_length(hw);
1982 if (ret_val)
1983 return ret_val;
1984
1985 ret_val = e1e_rphy(hw, MII_STAT1000, &data);
1986 if (ret_val)
1987 return ret_val;
1988
1989 phy->local_rx = (data & LPA_1000LOCALRXOK)
1990 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
1991
1992 phy->remote_rx = (data & LPA_1000REMRXOK)
1993 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
1994 } else {
1995 phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
1996 phy->local_rx = e1000_1000t_rx_status_undefined;
1997 phy->remote_rx = e1000_1000t_rx_status_undefined;
1998 }
1999
2000 return ret_val;
2001}
2002
2003/**
2004 * e1000_get_phy_info_ife - Retrieves various IFE PHY states
2005 * @hw: pointer to the HW structure
2006 *
2007 * Populates "phy" structure with various feature states.
2008 **/
2009s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
2010{
2011 struct e1000_phy_info *phy = &hw->phy;
2012 s32 ret_val;
2013 u16 data;
2014 bool link;
2015
2016 ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
2017 if (ret_val)
2018 return ret_val;
2019
2020 if (!link) {
2021 e_dbg("Phy info is only valid if link is up\n");
2022 return -E1000_ERR_CONFIG;
2023 }
2024
2025 ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
2026 if (ret_val)
2027 return ret_val;
2028 phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE);
2029
2030 if (phy->polarity_correction) {
2031 ret_val = e1000_check_polarity_ife(hw);
2032 if (ret_val)
2033 return ret_val;
2034 } else {
2035 /* Polarity is forced */
2036 phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY)
2037 ? e1000_rev_polarity_reversed
2038 : e1000_rev_polarity_normal);
2039 }
2040
2041 ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
2042 if (ret_val)
2043 return ret_val;
2044
2045 phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS);
2046
2047 /* The following parameters are undefined for 10/100 operation. */
2048 phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
2049 phy->local_rx = e1000_1000t_rx_status_undefined;
2050 phy->remote_rx = e1000_1000t_rx_status_undefined;
2051
2052 return 0;
2053}
2054
2055/**
2056 * e1000e_phy_sw_reset - PHY software reset
2057 * @hw: pointer to the HW structure
2058 *
2059 * Does a software reset of the PHY by reading the PHY control register and
2060 * setting/write the control register reset bit to the PHY.
2061 **/
2062s32 e1000e_phy_sw_reset(struct e1000_hw *hw)
2063{
2064 s32 ret_val;
2065 u16 phy_ctrl;
2066
2067 ret_val = e1e_rphy(hw, MII_BMCR, &phy_ctrl);
2068 if (ret_val)
2069 return ret_val;
2070
2071 phy_ctrl |= BMCR_RESET;
2072 ret_val = e1e_wphy(hw, MII_BMCR, phy_ctrl);
2073 if (ret_val)
2074 return ret_val;
2075
2076 udelay(1);
2077
2078 return ret_val;
2079}
2080
2081/**
2082 * e1000e_phy_hw_reset_generic - PHY hardware reset
2083 * @hw: pointer to the HW structure
2084 *
2085 * Verify the reset block is not blocking us from resetting. Acquire
2086 * semaphore (if necessary) and read/set/write the device control reset
2087 * bit in the PHY. Wait the appropriate delay time for the device to
2088 * reset and release the semaphore (if necessary).
2089 **/
2090s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
2091{
2092 struct e1000_phy_info *phy = &hw->phy;
2093 s32 ret_val;
2094 u32 ctrl;
2095
2096 if (phy->ops.check_reset_block) {
2097 ret_val = phy->ops.check_reset_block(hw);
2098 if (ret_val)
2099 return 0;
2100 }
2101
2102 ret_val = phy->ops.acquire(hw);
2103 if (ret_val)
2104 return ret_val;
2105
2106 ctrl = er32(CTRL);
2107 ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
2108 e1e_flush();
2109
2110 udelay(phy->reset_delay_us);
2111
2112 ew32(CTRL, ctrl);
2113 e1e_flush();
2114
2115 usleep_range(150, 300);
2116
2117 phy->ops.release(hw);
2118
2119 return phy->ops.get_cfg_done(hw);
2120}
2121
2122/**
2123 * e1000e_get_cfg_done_generic - Generic configuration done
2124 * @hw: pointer to the HW structure
2125 *
2126 * Generic function to wait 10 milli-seconds for configuration to complete
2127 * and return success.
2128 **/
2129s32 e1000e_get_cfg_done_generic(struct e1000_hw __always_unused *hw)
2130{
2131 mdelay(10);
2132
2133 return 0;
2134}
2135
2136/**
2137 * e1000e_phy_init_script_igp3 - Inits the IGP3 PHY
2138 * @hw: pointer to the HW structure
2139 *
2140 * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
2141 **/
2142s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
2143{
2144 e_dbg("Running IGP 3 PHY init script\n");
2145
2146 /* PHY init IGP 3 */
2147 /* Enable rise/fall, 10-mode work in class-A */
2148 e1e_wphy(hw, 0x2F5B, 0x9018);
2149 /* Remove all caps from Replica path filter */
2150 e1e_wphy(hw, 0x2F52, 0x0000);
2151 /* Bias trimming for ADC, AFE and Driver (Default) */
2152 e1e_wphy(hw, 0x2FB1, 0x8B24);
2153 /* Increase Hybrid poly bias */
2154 e1e_wphy(hw, 0x2FB2, 0xF8F0);
2155 /* Add 4% to Tx amplitude in Gig mode */
2156 e1e_wphy(hw, 0x2010, 0x10B0);
2157 /* Disable trimming (TTT) */
2158 e1e_wphy(hw, 0x2011, 0x0000);
2159 /* Poly DC correction to 94.6% + 2% for all channels */
2160 e1e_wphy(hw, 0x20DD, 0x249A);
2161 /* ABS DC correction to 95.9% */
2162 e1e_wphy(hw, 0x20DE, 0x00D3);
2163 /* BG temp curve trim */
2164 e1e_wphy(hw, 0x28B4, 0x04CE);
2165 /* Increasing ADC OPAMP stage 1 currents to max */
2166 e1e_wphy(hw, 0x2F70, 0x29E4);
2167 /* Force 1000 ( required for enabling PHY regs configuration) */
2168 e1e_wphy(hw, 0x0000, 0x0140);
2169 /* Set upd_freq to 6 */
2170 e1e_wphy(hw, 0x1F30, 0x1606);
2171 /* Disable NPDFE */
2172 e1e_wphy(hw, 0x1F31, 0xB814);
2173 /* Disable adaptive fixed FFE (Default) */
2174 e1e_wphy(hw, 0x1F35, 0x002A);
2175 /* Enable FFE hysteresis */
2176 e1e_wphy(hw, 0x1F3E, 0x0067);
2177 /* Fixed FFE for short cable lengths */
2178 e1e_wphy(hw, 0x1F54, 0x0065);
2179 /* Fixed FFE for medium cable lengths */
2180 e1e_wphy(hw, 0x1F55, 0x002A);
2181 /* Fixed FFE for long cable lengths */
2182 e1e_wphy(hw, 0x1F56, 0x002A);
2183 /* Enable Adaptive Clip Threshold */
2184 e1e_wphy(hw, 0x1F72, 0x3FB0);
2185 /* AHT reset limit to 1 */
2186 e1e_wphy(hw, 0x1F76, 0xC0FF);
2187 /* Set AHT master delay to 127 msec */
2188 e1e_wphy(hw, 0x1F77, 0x1DEC);
2189 /* Set scan bits for AHT */
2190 e1e_wphy(hw, 0x1F78, 0xF9EF);
2191 /* Set AHT Preset bits */
2192 e1e_wphy(hw, 0x1F79, 0x0210);
2193 /* Change integ_factor of channel A to 3 */
2194 e1e_wphy(hw, 0x1895, 0x0003);
2195 /* Change prop_factor of channels BCD to 8 */
2196 e1e_wphy(hw, 0x1796, 0x0008);
2197 /* Change cg_icount + enable integbp for channels BCD */
2198 e1e_wphy(hw, 0x1798, 0xD008);
2199 /* Change cg_icount + enable integbp + change prop_factor_master
2200 * to 8 for channel A
2201 */
2202 e1e_wphy(hw, 0x1898, 0xD918);
2203 /* Disable AHT in Slave mode on channel A */
2204 e1e_wphy(hw, 0x187A, 0x0800);
2205 /* Enable LPLU and disable AN to 1000 in non-D0a states,
2206 * Enable SPD+B2B
2207 */
2208 e1e_wphy(hw, 0x0019, 0x008D);
2209 /* Enable restart AN on an1000_dis change */
2210 e1e_wphy(hw, 0x001B, 0x2080);
2211 /* Enable wh_fifo read clock in 10/100 modes */
2212 e1e_wphy(hw, 0x0014, 0x0045);
2213 /* Restart AN, Speed selection is 1000 */
2214 e1e_wphy(hw, 0x0000, 0x1340);
2215
2216 return 0;
2217}
2218
2219/**
2220 * e1000e_get_phy_type_from_id - Get PHY type from id
2221 * @phy_id: phy_id read from the phy
2222 *
2223 * Returns the phy type from the id.
2224 **/
2225enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
2226{
2227 enum e1000_phy_type phy_type = e1000_phy_unknown;
2228
2229 switch (phy_id) {
2230 case M88E1000_I_PHY_ID:
2231 case M88E1000_E_PHY_ID:
2232 case M88E1111_I_PHY_ID:
2233 case M88E1011_I_PHY_ID:
2234 phy_type = e1000_phy_m88;
2235 break;
2236 case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */
2237 phy_type = e1000_phy_igp_2;
2238 break;
2239 case GG82563_E_PHY_ID:
2240 phy_type = e1000_phy_gg82563;
2241 break;
2242 case IGP03E1000_E_PHY_ID:
2243 phy_type = e1000_phy_igp_3;
2244 break;
2245 case IFE_E_PHY_ID:
2246 case IFE_PLUS_E_PHY_ID:
2247 case IFE_C_E_PHY_ID:
2248 phy_type = e1000_phy_ife;
2249 break;
2250 case BME1000_E_PHY_ID:
2251 case BME1000_E_PHY_ID_R2:
2252 phy_type = e1000_phy_bm;
2253 break;
2254 case I82578_E_PHY_ID:
2255 phy_type = e1000_phy_82578;
2256 break;
2257 case I82577_E_PHY_ID:
2258 phy_type = e1000_phy_82577;
2259 break;
2260 case I82579_E_PHY_ID:
2261 phy_type = e1000_phy_82579;
2262 break;
2263 case I217_E_PHY_ID:
2264 phy_type = e1000_phy_i217;
2265 break;
2266 default:
2267 phy_type = e1000_phy_unknown;
2268 break;
2269 }
2270 return phy_type;
2271}
2272
2273/**
2274 * e1000e_determine_phy_address - Determines PHY address.
2275 * @hw: pointer to the HW structure
2276 *
2277 * This uses a trial and error method to loop through possible PHY
2278 * addresses. It tests each by reading the PHY ID registers and
2279 * checking for a match.
2280 **/
2281s32 e1000e_determine_phy_address(struct e1000_hw *hw)
2282{
2283 u32 phy_addr = 0;
2284 u32 i;
2285 enum e1000_phy_type phy_type = e1000_phy_unknown;
2286
2287 hw->phy.id = phy_type;
2288
2289 for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
2290 hw->phy.addr = phy_addr;
2291 i = 0;
2292
2293 do {
2294 e1000e_get_phy_id(hw);
2295 phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
2296
2297 /* If phy_type is valid, break - we found our
2298 * PHY address
2299 */
2300 if (phy_type != e1000_phy_unknown)
2301 return 0;
2302
2303 usleep_range(1000, 2000);
2304 i++;
2305 } while (i < 10);
2306 }
2307
2308 return -E1000_ERR_PHY_TYPE;
2309}
2310
2311/**
2312 * e1000_get_phy_addr_for_bm_page - Retrieve PHY page address
2313 * @page: page to access
2314 * @reg: register to check
2315 *
2316 * Returns the phy address for the page requested.
2317 **/
2318static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg)
2319{
2320 u32 phy_addr = 2;
2321
2322 if ((page >= 768) || (page == 0 && reg == 25) || (reg == 31))
2323 phy_addr = 1;
2324
2325 return phy_addr;
2326}
2327
2328/**
2329 * e1000e_write_phy_reg_bm - Write BM PHY register
2330 * @hw: pointer to the HW structure
2331 * @offset: register offset to write to
2332 * @data: data to write at register offset
2333 *
2334 * Acquires semaphore, if necessary, then writes the data to PHY register
2335 * at the offset. Release any acquired semaphores before exiting.
2336 **/
2337s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
2338{
2339 s32 ret_val;
2340 u32 page = offset >> IGP_PAGE_SHIFT;
2341
2342 ret_val = hw->phy.ops.acquire(hw);
2343 if (ret_val)
2344 return ret_val;
2345
2346 /* Page 800 works differently than the rest so it has its own func */
2347 if (page == BM_WUC_PAGE) {
2348 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
2349 false, false);
2350 goto release;
2351 }
2352
2353 hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
2354
2355 if (offset > MAX_PHY_MULTI_PAGE_REG) {
2356 u32 page_shift, page_select;
2357
2358 /* Page select is register 31 for phy address 1 and 22 for
2359 * phy address 2 and 3. Page select is shifted only for
2360 * phy address 1.
2361 */
2362 if (hw->phy.addr == 1) {
2363 page_shift = IGP_PAGE_SHIFT;
2364 page_select = IGP01E1000_PHY_PAGE_SELECT;
2365 } else {
2366 page_shift = 0;
2367 page_select = BM_PHY_PAGE_SELECT;
2368 }
2369
2370 /* Page is shifted left, PHY expects (page x 32) */
2371 ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
2372 (page << page_shift));
2373 if (ret_val)
2374 goto release;
2375 }
2376
2377 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
2378 data);
2379
2380release:
2381 hw->phy.ops.release(hw);
2382 return ret_val;
2383}
2384
2385/**
2386 * e1000e_read_phy_reg_bm - Read BM PHY register
2387 * @hw: pointer to the HW structure
2388 * @offset: register offset to be read
2389 * @data: pointer to the read data
2390 *
2391 * Acquires semaphore, if necessary, then reads the PHY register at offset
2392 * and storing the retrieved information in data. Release any acquired
2393 * semaphores before exiting.
2394 **/
2395s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
2396{
2397 s32 ret_val;
2398 u32 page = offset >> IGP_PAGE_SHIFT;
2399
2400 ret_val = hw->phy.ops.acquire(hw);
2401 if (ret_val)
2402 return ret_val;
2403
2404 /* Page 800 works differently than the rest so it has its own func */
2405 if (page == BM_WUC_PAGE) {
2406 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
2407 true, false);
2408 goto release;
2409 }
2410
2411 hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
2412
2413 if (offset > MAX_PHY_MULTI_PAGE_REG) {
2414 u32 page_shift, page_select;
2415
2416 /* Page select is register 31 for phy address 1 and 22 for
2417 * phy address 2 and 3. Page select is shifted only for
2418 * phy address 1.
2419 */
2420 if (hw->phy.addr == 1) {
2421 page_shift = IGP_PAGE_SHIFT;
2422 page_select = IGP01E1000_PHY_PAGE_SELECT;
2423 } else {
2424 page_shift = 0;
2425 page_select = BM_PHY_PAGE_SELECT;
2426 }
2427
2428 /* Page is shifted left, PHY expects (page x 32) */
2429 ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
2430 (page << page_shift));
2431 if (ret_val)
2432 goto release;
2433 }
2434
2435 ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
2436 data);
2437release:
2438 hw->phy.ops.release(hw);
2439 return ret_val;
2440}
2441
2442/**
2443 * e1000e_read_phy_reg_bm2 - Read BM PHY register
2444 * @hw: pointer to the HW structure
2445 * @offset: register offset to be read
2446 * @data: pointer to the read data
2447 *
2448 * Acquires semaphore, if necessary, then reads the PHY register at offset
2449 * and storing the retrieved information in data. Release any acquired
2450 * semaphores before exiting.
2451 **/
2452s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
2453{
2454 s32 ret_val;
2455 u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
2456
2457 ret_val = hw->phy.ops.acquire(hw);
2458 if (ret_val)
2459 return ret_val;
2460
2461 /* Page 800 works differently than the rest so it has its own func */
2462 if (page == BM_WUC_PAGE) {
2463 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
2464 true, false);
2465 goto release;
2466 }
2467
2468 hw->phy.addr = 1;
2469
2470 if (offset > MAX_PHY_MULTI_PAGE_REG) {
2471 /* Page is shifted left, PHY expects (page x 32) */
2472 ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
2473 page);
2474
2475 if (ret_val)
2476 goto release;
2477 }
2478
2479 ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
2480 data);
2481release:
2482 hw->phy.ops.release(hw);
2483 return ret_val;
2484}
2485
2486/**
2487 * e1000e_write_phy_reg_bm2 - Write BM PHY register
2488 * @hw: pointer to the HW structure
2489 * @offset: register offset to write to
2490 * @data: data to write at register offset
2491 *
2492 * Acquires semaphore, if necessary, then writes the data to PHY register
2493 * at the offset. Release any acquired semaphores before exiting.
2494 **/
2495s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
2496{
2497 s32 ret_val;
2498 u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
2499
2500 ret_val = hw->phy.ops.acquire(hw);
2501 if (ret_val)
2502 return ret_val;
2503
2504 /* Page 800 works differently than the rest so it has its own func */
2505 if (page == BM_WUC_PAGE) {
2506 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
2507 false, false);
2508 goto release;
2509 }
2510
2511 hw->phy.addr = 1;
2512
2513 if (offset > MAX_PHY_MULTI_PAGE_REG) {
2514 /* Page is shifted left, PHY expects (page x 32) */
2515 ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
2516 page);
2517
2518 if (ret_val)
2519 goto release;
2520 }
2521
2522 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
2523 data);
2524
2525release:
2526 hw->phy.ops.release(hw);
2527 return ret_val;
2528}
2529
2530/**
2531 * e1000_enable_phy_wakeup_reg_access_bm - enable access to BM wakeup registers
2532 * @hw: pointer to the HW structure
2533 * @phy_reg: pointer to store original contents of BM_WUC_ENABLE_REG
2534 *
2535 * Assumes semaphore already acquired and phy_reg points to a valid memory
2536 * address to store contents of the BM_WUC_ENABLE_REG register.
2537 **/
2538s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
2539{
2540 s32 ret_val;
2541 u16 temp;
2542
2543 /* All page select, port ctrl and wakeup registers use phy address 1 */
2544 hw->phy.addr = 1;
2545
2546 /* Select Port Control Registers page */
2547 ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
2548 if (ret_val) {
2549 e_dbg("Could not set Port Control page\n");
2550 return ret_val;
2551 }
2552
2553 ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
2554 if (ret_val) {
2555 e_dbg("Could not read PHY register %d.%d\n",
2556 BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
2557 return ret_val;
2558 }
2559
2560 /* Enable both PHY wakeup mode and Wakeup register page writes.
2561 * Prevent a power state change by disabling ME and Host PHY wakeup.
2562 */
2563 temp = *phy_reg;
2564 temp |= BM_WUC_ENABLE_BIT;
2565 temp &= ~(BM_WUC_ME_WU_BIT | BM_WUC_HOST_WU_BIT);
2566
2567 ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, temp);
2568 if (ret_val) {
2569 e_dbg("Could not write PHY register %d.%d\n",
2570 BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
2571 return ret_val;
2572 }
2573
2574 /* Select Host Wakeup Registers page - caller now able to write
2575 * registers on the Wakeup registers page
2576 */
2577 return e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
2578}
2579
2580/**
2581 * e1000_disable_phy_wakeup_reg_access_bm - disable access to BM wakeup regs
2582 * @hw: pointer to the HW structure
2583 * @phy_reg: pointer to original contents of BM_WUC_ENABLE_REG
2584 *
2585 * Restore BM_WUC_ENABLE_REG to its original value.
2586 *
2587 * Assumes semaphore already acquired and *phy_reg is the contents of the
2588 * BM_WUC_ENABLE_REG before register(s) on BM_WUC_PAGE were accessed by
2589 * caller.
2590 **/
2591s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
2592{
2593 s32 ret_val;
2594
2595 /* Select Port Control Registers page */
2596 ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
2597 if (ret_val) {
2598 e_dbg("Could not set Port Control page\n");
2599 return ret_val;
2600 }
2601
2602 /* Restore 769.17 to its original value */
2603 ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, *phy_reg);
2604 if (ret_val)
2605 e_dbg("Could not restore PHY register %d.%d\n",
2606 BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
2607
2608 return ret_val;
2609}
2610
2611/**
2612 * e1000_access_phy_wakeup_reg_bm - Read/write BM PHY wakeup register
2613 * @hw: pointer to the HW structure
2614 * @offset: register offset to be read or written
2615 * @data: pointer to the data to read or write
2616 * @read: determines if operation is read or write
2617 * @page_set: BM_WUC_PAGE already set and access enabled
2618 *
2619 * Read the PHY register at offset and store the retrieved information in
2620 * data, or write data to PHY register at offset. Note the procedure to
2621 * access the PHY wakeup registers is different than reading the other PHY
2622 * registers. It works as such:
2623 * 1) Set 769.17.2 (page 769, register 17, bit 2) = 1
2624 * 2) Set page to 800 for host (801 if we were manageability)
2625 * 3) Write the address using the address opcode (0x11)
2626 * 4) Read or write the data using the data opcode (0x12)
2627 * 5) Restore 769.17.2 to its original value
2628 *
2629 * Steps 1 and 2 are done by e1000_enable_phy_wakeup_reg_access_bm() and
2630 * step 5 is done by e1000_disable_phy_wakeup_reg_access_bm().
2631 *
2632 * Assumes semaphore is already acquired. When page_set==true, assumes
2633 * the PHY page is set to BM_WUC_PAGE (i.e. a function in the call stack
2634 * is responsible for calls to e1000_[enable|disable]_phy_wakeup_reg_bm()).
2635 **/
2636static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
2637 u16 *data, bool read, bool page_set)
2638{
2639 s32 ret_val;
2640 u16 reg = BM_PHY_REG_NUM(offset);
2641 u16 page = BM_PHY_REG_PAGE(offset);
2642 u16 phy_reg = 0;
2643
2644 /* Gig must be disabled for MDIO accesses to Host Wakeup reg page */
2645 if ((hw->mac.type == e1000_pchlan) &&
2646 (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
2647 e_dbg("Attempting to access page %d while gig enabled.\n",
2648 page);
2649
2650 if (!page_set) {
2651 /* Enable access to PHY wakeup registers */
2652 ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
2653 if (ret_val) {
2654 e_dbg("Could not enable PHY wakeup reg access\n");
2655 return ret_val;
2656 }
2657 }
2658
2659 e_dbg("Accessing PHY page %d reg 0x%x\n", page, reg);
2660
2661 /* Write the Wakeup register page offset value using opcode 0x11 */
2662 ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
2663 if (ret_val) {
2664 e_dbg("Could not write address opcode to page %d\n", page);
2665 return ret_val;
2666 }
2667
2668 if (read) {
2669 /* Read the Wakeup register page value using opcode 0x12 */
2670 ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
2671 data);
2672 } else {
2673 /* Write the Wakeup register page value using opcode 0x12 */
2674 ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
2675 *data);
2676 }
2677
2678 if (ret_val) {
2679 e_dbg("Could not access PHY reg %d.%d\n", page, reg);
2680 return ret_val;
2681 }
2682
2683 if (!page_set)
2684 ret_val = e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
2685
2686 return ret_val;
2687}
2688
2689/**
2690 * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
2691 * @hw: pointer to the HW structure
2692 *
2693 * In the case of a PHY power down to save power, or to turn off link during a
2694 * driver unload, or wake on lan is not enabled, restore the link to previous
2695 * settings.
2696 **/
2697void e1000_power_up_phy_copper(struct e1000_hw *hw)
2698{
2699 u16 mii_reg = 0;
2700
2701 /* The PHY will retain its settings across a power down/up cycle */
2702 e1e_rphy(hw, MII_BMCR, &mii_reg);
2703 mii_reg &= ~BMCR_PDOWN;
2704 e1e_wphy(hw, MII_BMCR, mii_reg);
2705}
2706
2707/**
2708 * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
2709 * @hw: pointer to the HW structure
2710 *
2711 * In the case of a PHY power down to save power, or to turn off link during a
2712 * driver unload, or wake on lan is not enabled, restore the link to previous
2713 * settings.
2714 **/
2715void e1000_power_down_phy_copper(struct e1000_hw *hw)
2716{
2717 u16 mii_reg = 0;
2718
2719 /* The PHY will retain its settings across a power down/up cycle */
2720 e1e_rphy(hw, MII_BMCR, &mii_reg);
2721 mii_reg |= BMCR_PDOWN;
2722 e1e_wphy(hw, MII_BMCR, mii_reg);
2723 usleep_range(1000, 2000);
2724}
2725
2726/**
2727 * __e1000_read_phy_reg_hv - Read HV PHY register
2728 * @hw: pointer to the HW structure
2729 * @offset: register offset to be read
2730 * @data: pointer to the read data
2731 * @locked: semaphore has already been acquired or not
2732 * @page_set: BM_WUC_PAGE already set and access enabled
2733 *
2734 * Acquires semaphore, if necessary, then reads the PHY register at offset
2735 * and stores the retrieved information in data. Release any acquired
2736 * semaphore before exiting.
2737 **/
2738static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
2739 bool locked, bool page_set)
2740{
2741 s32 ret_val;
2742 u16 page = BM_PHY_REG_PAGE(offset);
2743 u16 reg = BM_PHY_REG_NUM(offset);
2744 u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
2745
2746 if (!locked) {
2747 ret_val = hw->phy.ops.acquire(hw);
2748 if (ret_val)
2749 return ret_val;
2750 }
2751
2752 /* Page 800 works differently than the rest so it has its own func */
2753 if (page == BM_WUC_PAGE) {
2754 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
2755 true, page_set);
2756 goto out;
2757 }
2758
2759 if (page > 0 && page < HV_INTC_FC_PAGE_START) {
2760 ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
2761 data, true);
2762 goto out;
2763 }
2764
2765 if (!page_set) {
2766 if (page == HV_INTC_FC_PAGE_START)
2767 page = 0;
2768
2769 if (reg > MAX_PHY_MULTI_PAGE_REG) {
2770 /* Page is shifted left, PHY expects (page x 32) */
2771 ret_val = e1000_set_page_igp(hw,
2772 (page << IGP_PAGE_SHIFT));
2773
2774 hw->phy.addr = phy_addr;
2775
2776 if (ret_val)
2777 goto out;
2778 }
2779 }
2780
2781 e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
2782 page << IGP_PAGE_SHIFT, reg);
2783
2784 ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data);
2785out:
2786 if (!locked)
2787 hw->phy.ops.release(hw);
2788
2789 return ret_val;
2790}
2791
2792/**
2793 * e1000_read_phy_reg_hv - Read HV PHY register
2794 * @hw: pointer to the HW structure
2795 * @offset: register offset to be read
2796 * @data: pointer to the read data
2797 *
2798 * Acquires semaphore then reads the PHY register at offset and stores
2799 * the retrieved information in data. Release the acquired semaphore
2800 * before exiting.
2801 **/
2802s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
2803{
2804 return __e1000_read_phy_reg_hv(hw, offset, data, false, false);
2805}
2806
2807/**
2808 * e1000_read_phy_reg_hv_locked - Read HV PHY register
2809 * @hw: pointer to the HW structure
2810 * @offset: register offset to be read
2811 * @data: pointer to the read data
2812 *
2813 * Reads the PHY register at offset and stores the retrieved information
2814 * in data. Assumes semaphore already acquired.
2815 **/
2816s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
2817{
2818 return __e1000_read_phy_reg_hv(hw, offset, data, true, false);
2819}
2820
2821/**
2822 * e1000_read_phy_reg_page_hv - Read HV PHY register
2823 * @hw: pointer to the HW structure
2824 * @offset: register offset to write to
2825 * @data: data to write at register offset
2826 *
2827 * Reads the PHY register at offset and stores the retrieved information
2828 * in data. Assumes semaphore already acquired and page already set.
2829 **/
2830s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data)
2831{
2832 return __e1000_read_phy_reg_hv(hw, offset, data, true, true);
2833}
2834
2835/**
2836 * __e1000_write_phy_reg_hv - Write HV PHY register
2837 * @hw: pointer to the HW structure
2838 * @offset: register offset to write to
2839 * @data: data to write at register offset
2840 * @locked: semaphore has already been acquired or not
2841 * @page_set: BM_WUC_PAGE already set and access enabled
2842 *
2843 * Acquires semaphore, if necessary, then writes the data to PHY register
2844 * at the offset. Release any acquired semaphores before exiting.
2845 **/
2846static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
2847 bool locked, bool page_set)
2848{
2849 s32 ret_val;
2850 u16 page = BM_PHY_REG_PAGE(offset);
2851 u16 reg = BM_PHY_REG_NUM(offset);
2852 u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
2853
2854 if (!locked) {
2855 ret_val = hw->phy.ops.acquire(hw);
2856 if (ret_val)
2857 return ret_val;
2858 }
2859
2860 /* Page 800 works differently than the rest so it has its own func */
2861 if (page == BM_WUC_PAGE) {
2862 ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
2863 false, page_set);
2864 goto out;
2865 }
2866
2867 if (page > 0 && page < HV_INTC_FC_PAGE_START) {
2868 ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
2869 &data, false);
2870 goto out;
2871 }
2872
2873 if (!page_set) {
2874 if (page == HV_INTC_FC_PAGE_START)
2875 page = 0;
2876
2877 /* Workaround MDIO accesses being disabled after entering IEEE
2878 * Power Down (when bit 11 of the PHY Control register is set)
2879 */
2880 if ((hw->phy.type == e1000_phy_82578) &&
2881 (hw->phy.revision >= 1) &&
2882 (hw->phy.addr == 2) &&
2883 !(MAX_PHY_REG_ADDRESS & reg) && (data & BIT(11))) {
2884 u16 data2 = 0x7EFF;
2885
2886 ret_val = e1000_access_phy_debug_regs_hv(hw,
2887 BIT(6) | 0x3,
2888 &data2, false);
2889 if (ret_val)
2890 goto out;
2891 }
2892
2893 if (reg > MAX_PHY_MULTI_PAGE_REG) {
2894 /* Page is shifted left, PHY expects (page x 32) */
2895 ret_val = e1000_set_page_igp(hw,
2896 (page << IGP_PAGE_SHIFT));
2897
2898 hw->phy.addr = phy_addr;
2899
2900 if (ret_val)
2901 goto out;
2902 }
2903 }
2904
2905 e_dbg("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
2906 page << IGP_PAGE_SHIFT, reg);
2907
2908 ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
2909 data);
2910
2911out:
2912 if (!locked)
2913 hw->phy.ops.release(hw);
2914
2915 return ret_val;
2916}
2917
2918/**
2919 * e1000_write_phy_reg_hv - Write HV PHY register
2920 * @hw: pointer to the HW structure
2921 * @offset: register offset to write to
2922 * @data: data to write at register offset
2923 *
2924 * Acquires semaphore then writes the data to PHY register at the offset.
2925 * Release the acquired semaphores before exiting.
2926 **/
2927s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
2928{
2929 return __e1000_write_phy_reg_hv(hw, offset, data, false, false);
2930}
2931
2932/**
2933 * e1000_write_phy_reg_hv_locked - Write HV PHY register
2934 * @hw: pointer to the HW structure
2935 * @offset: register offset to write to
2936 * @data: data to write at register offset
2937 *
2938 * Writes the data to PHY register at the offset. Assumes semaphore
2939 * already acquired.
2940 **/
2941s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
2942{
2943 return __e1000_write_phy_reg_hv(hw, offset, data, true, false);
2944}
2945
2946/**
2947 * e1000_write_phy_reg_page_hv - Write HV PHY register
2948 * @hw: pointer to the HW structure
2949 * @offset: register offset to write to
2950 * @data: data to write at register offset
2951 *
2952 * Writes the data to PHY register at the offset. Assumes semaphore
2953 * already acquired and page already set.
2954 **/
2955s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data)
2956{
2957 return __e1000_write_phy_reg_hv(hw, offset, data, true, true);
2958}
2959
2960/**
2961 * e1000_get_phy_addr_for_hv_page - Get PHY address based on page
2962 * @page: page to be accessed
2963 **/
2964static u32 e1000_get_phy_addr_for_hv_page(u32 page)
2965{
2966 u32 phy_addr = 2;
2967
2968 if (page >= HV_INTC_FC_PAGE_START)
2969 phy_addr = 1;
2970
2971 return phy_addr;
2972}
2973
2974/**
2975 * e1000_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers
2976 * @hw: pointer to the HW structure
2977 * @offset: register offset to be read or written
2978 * @data: pointer to the data to be read or written
2979 * @read: determines if operation is read or write
2980 *
2981 * Reads the PHY register at offset and stores the retrieved information
2982 * in data. Assumes semaphore already acquired. Note that the procedure
2983 * to access these regs uses the address port and data port to read/write.
2984 * These accesses done with PHY address 2 and without using pages.
2985 **/
2986static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
2987 u16 *data, bool read)
2988{
2989 s32 ret_val;
2990 u32 addr_reg;
2991 u32 data_reg;
2992
2993 /* This takes care of the difference with desktop vs mobile phy */
2994 addr_reg = ((hw->phy.type == e1000_phy_82578) ?
2995 I82578_ADDR_REG : I82577_ADDR_REG);
2996 data_reg = addr_reg + 1;
2997
2998 /* All operations in this function are phy address 2 */
2999 hw->phy.addr = 2;
3000
3001 /* masking with 0x3F to remove the page from offset */
3002 ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
3003 if (ret_val) {
3004 e_dbg("Could not write the Address Offset port register\n");
3005 return ret_val;
3006 }
3007
3008 /* Read or write the data value next */
3009 if (read)
3010 ret_val = e1000e_read_phy_reg_mdic(hw, data_reg, data);
3011 else
3012 ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
3013
3014 if (ret_val)
3015 e_dbg("Could not access the Data port register\n");
3016
3017 return ret_val;
3018}
3019
3020/**
3021 * e1000_link_stall_workaround_hv - Si workaround
3022 * @hw: pointer to the HW structure
3023 *
3024 * This function works around a Si bug where the link partner can get
3025 * a link up indication before the PHY does. If small packets are sent
3026 * by the link partner they can be placed in the packet buffer without
3027 * being properly accounted for by the PHY and will stall preventing
3028 * further packets from being received. The workaround is to clear the
3029 * packet buffer after the PHY detects link up.
3030 **/
3031s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
3032{
3033 s32 ret_val = 0;
3034 u16 data;
3035
3036 if (hw->phy.type != e1000_phy_82578)
3037 return 0;
3038
3039 /* Do not apply workaround if in PHY loopback bit 14 set */
3040 e1e_rphy(hw, MII_BMCR, &data);
3041 if (data & BMCR_LOOPBACK)
3042 return 0;
3043
3044 /* check if link is up and at 1Gbps */
3045 ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
3046 if (ret_val)
3047 return ret_val;
3048
3049 data &= (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
3050 BM_CS_STATUS_SPEED_MASK);
3051
3052 if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
3053 BM_CS_STATUS_SPEED_1000))
3054 return 0;
3055
3056 msleep(200);
3057
3058 /* flush the packets in the fifo buffer */
3059 ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL,
3060 (HV_MUX_DATA_CTRL_GEN_TO_MAC |
3061 HV_MUX_DATA_CTRL_FORCE_SPEED));
3062 if (ret_val)
3063 return ret_val;
3064
3065 return e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
3066}
3067
3068/**
3069 * e1000_check_polarity_82577 - Checks the polarity.
3070 * @hw: pointer to the HW structure
3071 *
3072 * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
3073 *
3074 * Polarity is determined based on the PHY specific status register.
3075 **/
3076s32 e1000_check_polarity_82577(struct e1000_hw *hw)
3077{
3078 struct e1000_phy_info *phy = &hw->phy;
3079 s32 ret_val;
3080 u16 data;
3081
3082 ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
3083
3084 if (!ret_val)
3085 phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY)
3086 ? e1000_rev_polarity_reversed
3087 : e1000_rev_polarity_normal);
3088
3089 return ret_val;
3090}
3091
3092/**
3093 * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
3094 * @hw: pointer to the HW structure
3095 *
3096 * Calls the PHY setup function to force speed and duplex.
3097 **/
3098s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
3099{
3100 struct e1000_phy_info *phy = &hw->phy;
3101 s32 ret_val;
3102 u16 phy_data;
3103 bool link;
3104
3105 ret_val = e1e_rphy(hw, MII_BMCR, &phy_data);
3106 if (ret_val)
3107 return ret_val;
3108
3109 e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
3110
3111 ret_val = e1e_wphy(hw, MII_BMCR, phy_data);
3112 if (ret_val)
3113 return ret_val;
3114
3115 udelay(1);
3116
3117 if (phy->autoneg_wait_to_complete) {
3118 e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
3119
3120 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
3121 100000, &link);
3122 if (ret_val)
3123 return ret_val;
3124
3125 if (!link)
3126 e_dbg("Link taking longer than expected.\n");
3127
3128 /* Try once more */
3129 ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
3130 100000, &link);
3131 }
3132
3133 return ret_val;
3134}
3135
3136/**
3137 * e1000_get_phy_info_82577 - Retrieve I82577 PHY information
3138 * @hw: pointer to the HW structure
3139 *
3140 * Read PHY status to determine if link is up. If link is up, then
3141 * set/determine 10base-T extended distance and polarity correction. Read
3142 * PHY port status to determine MDI/MDIx and speed. Based on the speed,
3143 * determine on the cable length, local and remote receiver.
3144 **/
3145s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
3146{
3147 struct e1000_phy_info *phy = &hw->phy;
3148 s32 ret_val;
3149 u16 data;
3150 bool link;
3151
3152 ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
3153 if (ret_val)
3154 return ret_val;
3155
3156 if (!link) {
3157 e_dbg("Phy info is only valid if link is up\n");
3158 return -E1000_ERR_CONFIG;
3159 }
3160
3161 phy->polarity_correction = true;
3162
3163 ret_val = e1000_check_polarity_82577(hw);
3164 if (ret_val)
3165 return ret_val;
3166
3167 ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
3168 if (ret_val)
3169 return ret_val;
3170
3171 phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX);
3172
3173 if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
3174 I82577_PHY_STATUS2_SPEED_1000MBPS) {
3175 ret_val = hw->phy.ops.get_cable_length(hw);
3176 if (ret_val)
3177 return ret_val;
3178
3179 ret_val = e1e_rphy(hw, MII_STAT1000, &data);
3180 if (ret_val)
3181 return ret_val;
3182
3183 phy->local_rx = (data & LPA_1000LOCALRXOK)
3184 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
3185
3186 phy->remote_rx = (data & LPA_1000REMRXOK)
3187 ? e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
3188 } else {
3189 phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
3190 phy->local_rx = e1000_1000t_rx_status_undefined;
3191 phy->remote_rx = e1000_1000t_rx_status_undefined;
3192 }
3193
3194 return 0;
3195}
3196
3197/**
3198 * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY
3199 * @hw: pointer to the HW structure
3200 *
3201 * Reads the diagnostic status register and verifies result is valid before
3202 * placing it in the phy_cable_length field.
3203 **/
3204s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
3205{
3206 struct e1000_phy_info *phy = &hw->phy;
3207 s32 ret_val;
3208 u16 phy_data, length;
3209
3210 ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
3211 if (ret_val)
3212 return ret_val;
3213
3214 length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
3215 I82577_DSTATUS_CABLE_LENGTH_SHIFT);
3216
3217 if (length == E1000_CABLE_LENGTH_UNDEFINED)
3218 return -E1000_ERR_PHY;
3219
3220 phy->cable_length = length;
3221
3222 return 0;
3223}