Loading...
1/*
2 * linux/drivers/message/fusion/mptctl.c
3 * mpt Ioctl driver.
4 * For use with LSI PCI chip/adapters
5 * running LSI Fusion MPT (Message Passing Technology) firmware.
6 *
7 * Copyright (c) 1999-2008 LSI Corporation
8 * (mailto:DL-MPTFusionLinux@lsi.com)
9 *
10 */
11/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
12/*
13 This program is free software; you can redistribute it and/or modify
14 it under the terms of the GNU General Public License as published by
15 the Free Software Foundation; version 2 of the License.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 NO WARRANTY
23 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
24 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
25 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
26 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
27 solely responsible for determining the appropriateness of using and
28 distributing the Program and assumes all risks associated with its
29 exercise of rights under this Agreement, including but not limited to
30 the risks and costs of program errors, damage to or loss of data,
31 programs or equipment, and unavailability or interruption of operations.
32
33 DISCLAIMER OF LIABILITY
34 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
35 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
37 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
38 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
39 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
40 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
41
42 You should have received a copy of the GNU General Public License
43 along with this program; if not, write to the Free Software
44 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
45*/
46/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
47
48#include <linux/kernel.h>
49#include <linux/module.h>
50#include <linux/errno.h>
51#include <linux/init.h>
52#include <linux/slab.h>
53#include <linux/types.h>
54#include <linux/pci.h>
55#include <linux/delay.h> /* for mdelay */
56#include <linux/miscdevice.h>
57#include <linux/mutex.h>
58#include <linux/compat.h>
59
60#include <asm/io.h>
61#include <asm/uaccess.h>
62
63#include <scsi/scsi.h>
64#include <scsi/scsi_cmnd.h>
65#include <scsi/scsi_device.h>
66#include <scsi/scsi_host.h>
67#include <scsi/scsi_tcq.h>
68
69#define COPYRIGHT "Copyright (c) 1999-2008 LSI Corporation"
70#define MODULEAUTHOR "LSI Corporation"
71#include "mptbase.h"
72#include "mptctl.h"
73
74/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
75#define my_NAME "Fusion MPT misc device (ioctl) driver"
76#define my_VERSION MPT_LINUX_VERSION_COMMON
77#define MYNAM "mptctl"
78
79MODULE_AUTHOR(MODULEAUTHOR);
80MODULE_DESCRIPTION(my_NAME);
81MODULE_LICENSE("GPL");
82MODULE_VERSION(my_VERSION);
83
84/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
85
86static DEFINE_MUTEX(mpctl_mutex);
87static u8 mptctl_id = MPT_MAX_PROTOCOL_DRIVERS;
88static u8 mptctl_taskmgmt_id = MPT_MAX_PROTOCOL_DRIVERS;
89
90static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait );
91
92/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
93
94struct buflist {
95 u8 *kptr;
96 int len;
97};
98
99/*
100 * Function prototypes. Called from OS entry point mptctl_ioctl.
101 * arg contents specific to function.
102 */
103static int mptctl_fw_download(unsigned long arg);
104static int mptctl_getiocinfo(unsigned long arg, unsigned int cmd);
105static int mptctl_gettargetinfo(unsigned long arg);
106static int mptctl_readtest(unsigned long arg);
107static int mptctl_mpt_command(unsigned long arg);
108static int mptctl_eventquery(unsigned long arg);
109static int mptctl_eventenable(unsigned long arg);
110static int mptctl_eventreport(unsigned long arg);
111static int mptctl_replace_fw(unsigned long arg);
112
113static int mptctl_do_reset(unsigned long arg);
114static int mptctl_hp_hostinfo(unsigned long arg, unsigned int cmd);
115static int mptctl_hp_targetinfo(unsigned long arg);
116
117static int mptctl_probe(struct pci_dev *, const struct pci_device_id *);
118static void mptctl_remove(struct pci_dev *);
119
120#ifdef CONFIG_COMPAT
121static long compat_mpctl_ioctl(struct file *f, unsigned cmd, unsigned long arg);
122#endif
123/*
124 * Private function calls.
125 */
126static int mptctl_do_mpt_command(struct mpt_ioctl_command karg, void __user *mfPtr);
127static int mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen);
128static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags,
129 struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc);
130static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma,
131 struct buflist *buflist, MPT_ADAPTER *ioc);
132
133/*
134 * Reset Handler cleanup function
135 */
136static int mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase);
137
138/*
139 * Event Handler function
140 */
141static int mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
142static struct fasync_struct *async_queue=NULL;
143
144/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
145/*
146 * Scatter gather list (SGL) sizes and limits...
147 */
148//#define MAX_SCSI_FRAGS 9
149#define MAX_FRAGS_SPILL1 9
150#define MAX_FRAGS_SPILL2 15
151#define FRAGS_PER_BUCKET (MAX_FRAGS_SPILL2 + 1)
152
153//#define MAX_CHAIN_FRAGS 64
154//#define MAX_CHAIN_FRAGS (15+15+15+16)
155#define MAX_CHAIN_FRAGS (4 * MAX_FRAGS_SPILL2 + 1)
156
157// Define max sg LIST bytes ( == (#frags + #chains) * 8 bytes each)
158// Works out to: 592d bytes! (9+1)*8 + 4*(15+1)*8
159// ^----------------- 80 + 512
160#define MAX_SGL_BYTES ((MAX_FRAGS_SPILL1 + 1 + (4 * FRAGS_PER_BUCKET)) * 8)
161
162/* linux only seems to ever give 128kB MAX contiguous (GFP_USER) mem bytes */
163#define MAX_KMALLOC_SZ (128*1024)
164
165#define MPT_IOCTL_DEFAULT_TIMEOUT 10 /* Default timeout value (seconds) */
166
167/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
168/**
169 * mptctl_syscall_down - Down the MPT adapter syscall semaphore.
170 * @ioc: Pointer to MPT adapter
171 * @nonblock: boolean, non-zero if O_NONBLOCK is set
172 *
173 * All of the ioctl commands can potentially sleep, which is illegal
174 * with a spinlock held, thus we perform mutual exclusion here.
175 *
176 * Returns negative errno on error, or zero for success.
177 */
178static inline int
179mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock)
180{
181 int rc = 0;
182
183 if (nonblock) {
184 if (!mutex_trylock(&ioc->ioctl_cmds.mutex))
185 rc = -EAGAIN;
186 } else {
187 if (mutex_lock_interruptible(&ioc->ioctl_cmds.mutex))
188 rc = -ERESTARTSYS;
189 }
190 return rc;
191}
192
193/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
194/*
195 * This is the callback for any message we have posted. The message itself
196 * will be returned to the message pool when we return from the IRQ
197 *
198 * This runs in irq context so be short and sweet.
199 */
200static int
201mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
202{
203 char *sense_data;
204 int req_index;
205 int sz;
206
207 if (!req)
208 return 0;
209
210 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function "
211 "(0x%02X), req=%p, reply=%p\n", ioc->name, req->u.hdr.Function,
212 req, reply));
213
214 /*
215 * Handling continuation of the same reply. Processing the first
216 * reply, and eating the other replys that come later.
217 */
218 if (ioc->ioctl_cmds.msg_context != req->u.hdr.MsgContext)
219 goto out_continuation;
220
221 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
222
223 if (!reply)
224 goto out;
225
226 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
227 sz = min(ioc->reply_sz, 4*reply->u.reply.MsgLength);
228 memcpy(ioc->ioctl_cmds.reply, reply, sz);
229
230 if (reply->u.reply.IOCStatus || reply->u.reply.IOCLogInfo)
231 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
232 "iocstatus (0x%04X), loginfo (0x%08X)\n", ioc->name,
233 le16_to_cpu(reply->u.reply.IOCStatus),
234 le32_to_cpu(reply->u.reply.IOCLogInfo)));
235
236 if ((req->u.hdr.Function == MPI_FUNCTION_SCSI_IO_REQUEST) ||
237 (req->u.hdr.Function ==
238 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
239
240 if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
241 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
242 "scsi_status (0x%02x), scsi_state (0x%02x), "
243 "tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
244 reply->u.sreply.SCSIStatus,
245 reply->u.sreply.SCSIState,
246 le16_to_cpu(reply->u.sreply.TaskTag),
247 le32_to_cpu(reply->u.sreply.TransferCount)));
248
249 if (reply->u.sreply.SCSIState &
250 MPI_SCSI_STATE_AUTOSENSE_VALID) {
251 sz = req->u.scsireq.SenseBufferLength;
252 req_index =
253 le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
254 sense_data = ((u8 *)ioc->sense_buf_pool +
255 (req_index * MPT_SENSE_BUFFER_ALLOC));
256 memcpy(ioc->ioctl_cmds.sense, sense_data, sz);
257 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_SENSE_VALID;
258 }
259 }
260
261 out:
262 /* We are done, issue wake up
263 */
264 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
265 if (req->u.hdr.Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
266 mpt_clear_taskmgmt_in_progress_flag(ioc);
267 ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
268 complete(&ioc->ioctl_cmds.done);
269 if (ioc->bus_type == SAS)
270 ioc->schedule_target_reset(ioc);
271 } else {
272 ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
273 complete(&ioc->ioctl_cmds.done);
274 }
275 }
276
277 out_continuation:
278 if (reply && (reply->u.reply.MsgFlags &
279 MPI_MSGFLAGS_CONTINUATION_REPLY))
280 return 0;
281 return 1;
282}
283
284
285static int
286mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
287{
288 if (!mf)
289 return 0;
290
291 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
292 "TaskMgmt completed (mf=%p, mr=%p)\n",
293 ioc->name, mf, mr));
294
295 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
296
297 if (!mr)
298 goto out;
299
300 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
301 memcpy(ioc->taskmgmt_cmds.reply, mr,
302 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
303 out:
304 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
305 mpt_clear_taskmgmt_in_progress_flag(ioc);
306 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
307 complete(&ioc->taskmgmt_cmds.done);
308 if (ioc->bus_type == SAS)
309 ioc->schedule_target_reset(ioc);
310 return 1;
311 }
312 return 0;
313}
314
315static int
316mptctl_do_taskmgmt(MPT_ADAPTER *ioc, u8 tm_type, u8 bus_id, u8 target_id)
317{
318 MPT_FRAME_HDR *mf;
319 SCSITaskMgmt_t *pScsiTm;
320 SCSITaskMgmtReply_t *pScsiTmReply;
321 int ii;
322 int retval;
323 unsigned long timeout;
324 unsigned long time_count;
325 u16 iocstatus;
326
327
328 mutex_lock(&ioc->taskmgmt_cmds.mutex);
329 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
330 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
331 return -EPERM;
332 }
333
334 retval = 0;
335
336 mf = mpt_get_msg_frame(mptctl_taskmgmt_id, ioc);
337 if (mf == NULL) {
338 dtmprintk(ioc,
339 printk(MYIOC_s_WARN_FMT "TaskMgmt, no msg frames!!\n",
340 ioc->name));
341 mpt_clear_taskmgmt_in_progress_flag(ioc);
342 retval = -ENOMEM;
343 goto tm_done;
344 }
345
346 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
347 ioc->name, mf));
348
349 pScsiTm = (SCSITaskMgmt_t *) mf;
350 memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
351 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
352 pScsiTm->TaskType = tm_type;
353 if ((tm_type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) &&
354 (ioc->bus_type == FC))
355 pScsiTm->MsgFlags =
356 MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
357 pScsiTm->TargetID = target_id;
358 pScsiTm->Bus = bus_id;
359 pScsiTm->ChainOffset = 0;
360 pScsiTm->Reserved = 0;
361 pScsiTm->Reserved1 = 0;
362 pScsiTm->TaskMsgContext = 0;
363 for (ii= 0; ii < 8; ii++)
364 pScsiTm->LUN[ii] = 0;
365 for (ii=0; ii < 7; ii++)
366 pScsiTm->Reserved2[ii] = 0;
367
368 switch (ioc->bus_type) {
369 case FC:
370 timeout = 40;
371 break;
372 case SAS:
373 timeout = 30;
374 break;
375 case SPI:
376 default:
377 timeout = 10;
378 break;
379 }
380
381 dtmprintk(ioc,
382 printk(MYIOC_s_DEBUG_FMT "TaskMgmt type=%d timeout=%ld\n",
383 ioc->name, tm_type, timeout));
384
385 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
386 time_count = jiffies;
387 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
388 (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
389 mpt_put_msg_frame_hi_pri(mptctl_taskmgmt_id, ioc, mf);
390 else {
391 retval = mpt_send_handshake_request(mptctl_taskmgmt_id, ioc,
392 sizeof(SCSITaskMgmt_t), (u32 *)pScsiTm, CAN_SLEEP);
393 if (retval != 0) {
394 dfailprintk(ioc,
395 printk(MYIOC_s_ERR_FMT
396 "TaskMgmt send_handshake FAILED!"
397 " (ioc %p, mf %p, rc=%d) \n", ioc->name,
398 ioc, mf, retval));
399 mpt_free_msg_frame(ioc, mf);
400 mpt_clear_taskmgmt_in_progress_flag(ioc);
401 goto tm_done;
402 }
403 }
404
405 /* Now wait for the command to complete */
406 ii = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, timeout*HZ);
407
408 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
409 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
410 "TaskMgmt failed\n", ioc->name));
411 mpt_free_msg_frame(ioc, mf);
412 mpt_clear_taskmgmt_in_progress_flag(ioc);
413 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
414 retval = 0;
415 else
416 retval = -1; /* return failure */
417 goto tm_done;
418 }
419
420 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
421 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
422 "TaskMgmt failed\n", ioc->name));
423 retval = -1; /* return failure */
424 goto tm_done;
425 }
426
427 pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
428 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
429 "TaskMgmt fw_channel = %d, fw_id = %d, task_type=0x%02X, "
430 "iocstatus=0x%04X\n\tloginfo=0x%08X, response_code=0x%02X, "
431 "term_cmnds=%d\n", ioc->name, pScsiTmReply->Bus,
432 pScsiTmReply->TargetID, tm_type,
433 le16_to_cpu(pScsiTmReply->IOCStatus),
434 le32_to_cpu(pScsiTmReply->IOCLogInfo),
435 pScsiTmReply->ResponseCode,
436 le32_to_cpu(pScsiTmReply->TerminationCount)));
437
438 iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
439
440 if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
441 iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED ||
442 iocstatus == MPI_IOCSTATUS_SUCCESS)
443 retval = 0;
444 else {
445 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
446 "TaskMgmt failed\n", ioc->name));
447 retval = -1; /* return failure */
448 }
449
450 tm_done:
451 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
452 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
453 return retval;
454}
455
456/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
457/* mptctl_timeout_expired
458 *
459 * Expecting an interrupt, however timed out.
460 *
461 */
462static void
463mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
464{
465 unsigned long flags;
466 int ret_val = -1;
467 SCSIIORequest_t *scsi_req = (SCSIIORequest_t *) mf;
468 u8 function = mf->u.hdr.Function;
469
470 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n",
471 ioc->name, __func__));
472
473 if (mpt_fwfault_debug)
474 mpt_halt_firmware(ioc);
475
476 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
477 if (ioc->ioc_reset_in_progress) {
478 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
479 CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
480 mpt_free_msg_frame(ioc, mf);
481 return;
482 }
483 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
484
485
486 CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
487
488 if (ioc->bus_type == SAS) {
489 if (function == MPI_FUNCTION_SCSI_IO_REQUEST)
490 ret_val = mptctl_do_taskmgmt(ioc,
491 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
492 scsi_req->Bus, scsi_req->TargetID);
493 else if (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)
494 ret_val = mptctl_do_taskmgmt(ioc,
495 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
496 scsi_req->Bus, 0);
497 if (!ret_val)
498 return;
499 } else {
500 if ((function == MPI_FUNCTION_SCSI_IO_REQUEST) ||
501 (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH))
502 ret_val = mptctl_do_taskmgmt(ioc,
503 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
504 scsi_req->Bus, 0);
505 if (!ret_val)
506 return;
507 }
508
509 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling Reset! \n",
510 ioc->name));
511 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
512 mpt_free_msg_frame(ioc, mf);
513}
514
515
516/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
517/* mptctl_ioc_reset
518 *
519 * Clean-up functionality. Used only if there has been a
520 * reload of the FW due.
521 *
522 */
523static int
524mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
525{
526 switch(reset_phase) {
527 case MPT_IOC_SETUP_RESET:
528 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
529 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
530 break;
531 case MPT_IOC_PRE_RESET:
532 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
533 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
534 break;
535 case MPT_IOC_POST_RESET:
536 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
537 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
538 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
539 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_DID_IOCRESET;
540 complete(&ioc->ioctl_cmds.done);
541 }
542 break;
543 default:
544 break;
545 }
546
547 return 1;
548}
549
550/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
551/* ASYNC Event Notification Support */
552static int
553mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
554{
555 u8 event;
556
557 event = le32_to_cpu(pEvReply->Event) & 0xFF;
558
559 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s() called\n",
560 ioc->name, __func__));
561 if(async_queue == NULL)
562 return 1;
563
564 /* Raise SIGIO for persistent events.
565 * TODO - this define is not in MPI spec yet,
566 * but they plan to set it to 0x21
567 */
568 if (event == 0x21 ) {
569 ioc->aen_event_read_flag=1;
570 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Raised SIGIO to application\n",
571 ioc->name));
572 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
573 "Raised SIGIO to application\n", ioc->name));
574 kill_fasync(&async_queue, SIGIO, POLL_IN);
575 return 1;
576 }
577
578 /* This flag is set after SIGIO was raised, and
579 * remains set until the application has read
580 * the event log via ioctl=MPTEVENTREPORT
581 */
582 if(ioc->aen_event_read_flag)
583 return 1;
584
585 /* Signal only for the events that are
586 * requested for by the application
587 */
588 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
589 ioc->aen_event_read_flag=1;
590 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
591 "Raised SIGIO to application\n", ioc->name));
592 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
593 "Raised SIGIO to application\n", ioc->name));
594 kill_fasync(&async_queue, SIGIO, POLL_IN);
595 }
596 return 1;
597}
598
599static int
600mptctl_fasync(int fd, struct file *filep, int mode)
601{
602 MPT_ADAPTER *ioc;
603 int ret;
604
605 mutex_lock(&mpctl_mutex);
606 list_for_each_entry(ioc, &ioc_list, list)
607 ioc->aen_event_read_flag=0;
608
609 ret = fasync_helper(fd, filep, mode, &async_queue);
610 mutex_unlock(&mpctl_mutex);
611 return ret;
612}
613
614/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
615/*
616 * MPT ioctl handler
617 * cmd - specify the particular IOCTL command to be issued
618 * arg - data specific to the command. Must not be null.
619 */
620static long
621__mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
622{
623 mpt_ioctl_header __user *uhdr = (void __user *) arg;
624 mpt_ioctl_header khdr;
625 int iocnum;
626 unsigned iocnumX;
627 int nonblock = (file->f_flags & O_NONBLOCK);
628 int ret;
629 MPT_ADAPTER *iocp = NULL;
630
631 if (copy_from_user(&khdr, uhdr, sizeof(khdr))) {
632 printk(KERN_ERR MYNAM "%s::mptctl_ioctl() @%d - "
633 "Unable to copy mpt_ioctl_header data @ %p\n",
634 __FILE__, __LINE__, uhdr);
635 return -EFAULT;
636 }
637 ret = -ENXIO; /* (-6) No such device or address */
638
639 /* Verify intended MPT adapter - set iocnum and the adapter
640 * pointer (iocp)
641 */
642 iocnumX = khdr.iocnum & 0xFF;
643 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
644 (iocp == NULL))
645 return -ENODEV;
646
647 if (!iocp->active) {
648 printk(KERN_DEBUG MYNAM "%s::mptctl_ioctl() @%d - Controller disabled.\n",
649 __FILE__, __LINE__);
650 return -EFAULT;
651 }
652
653 /* Handle those commands that are just returning
654 * information stored in the driver.
655 * These commands should never time out and are unaffected
656 * by TM and FW reloads.
657 */
658 if ((cmd & ~IOCSIZE_MASK) == (MPTIOCINFO & ~IOCSIZE_MASK)) {
659 return mptctl_getiocinfo(arg, _IOC_SIZE(cmd));
660 } else if (cmd == MPTTARGETINFO) {
661 return mptctl_gettargetinfo(arg);
662 } else if (cmd == MPTTEST) {
663 return mptctl_readtest(arg);
664 } else if (cmd == MPTEVENTQUERY) {
665 return mptctl_eventquery(arg);
666 } else if (cmd == MPTEVENTENABLE) {
667 return mptctl_eventenable(arg);
668 } else if (cmd == MPTEVENTREPORT) {
669 return mptctl_eventreport(arg);
670 } else if (cmd == MPTFWREPLACE) {
671 return mptctl_replace_fw(arg);
672 }
673
674 /* All of these commands require an interrupt or
675 * are unknown/illegal.
676 */
677 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
678 return ret;
679
680 if (cmd == MPTFWDOWNLOAD)
681 ret = mptctl_fw_download(arg);
682 else if (cmd == MPTCOMMAND)
683 ret = mptctl_mpt_command(arg);
684 else if (cmd == MPTHARDRESET)
685 ret = mptctl_do_reset(arg);
686 else if ((cmd & ~IOCSIZE_MASK) == (HP_GETHOSTINFO & ~IOCSIZE_MASK))
687 ret = mptctl_hp_hostinfo(arg, _IOC_SIZE(cmd));
688 else if (cmd == HP_GETTARGETINFO)
689 ret = mptctl_hp_targetinfo(arg);
690 else
691 ret = -EINVAL;
692
693 mutex_unlock(&iocp->ioctl_cmds.mutex);
694
695 return ret;
696}
697
698static long
699mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
700{
701 long ret;
702 mutex_lock(&mpctl_mutex);
703 ret = __mptctl_ioctl(file, cmd, arg);
704 mutex_unlock(&mpctl_mutex);
705 return ret;
706}
707
708static int mptctl_do_reset(unsigned long arg)
709{
710 struct mpt_ioctl_diag_reset __user *urinfo = (void __user *) arg;
711 struct mpt_ioctl_diag_reset krinfo;
712 MPT_ADAPTER *iocp;
713
714 if (copy_from_user(&krinfo, urinfo, sizeof(struct mpt_ioctl_diag_reset))) {
715 printk(KERN_ERR MYNAM "%s@%d::mptctl_do_reset - "
716 "Unable to copy mpt_ioctl_diag_reset struct @ %p\n",
717 __FILE__, __LINE__, urinfo);
718 return -EFAULT;
719 }
720
721 if (mpt_verify_adapter(krinfo.hdr.iocnum, &iocp) < 0) {
722 printk(KERN_DEBUG MYNAM "%s@%d::mptctl_do_reset - ioc%d not found!\n",
723 __FILE__, __LINE__, krinfo.hdr.iocnum);
724 return -ENODEV; /* (-6) No such device or address */
725 }
726
727 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_reset called.\n",
728 iocp->name));
729
730 if (mpt_HardResetHandler(iocp, CAN_SLEEP) != 0) {
731 printk (MYIOC_s_ERR_FMT "%s@%d::mptctl_do_reset - reset failed.\n",
732 iocp->name, __FILE__, __LINE__);
733 return -1;
734 }
735
736 return 0;
737}
738
739/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
740/*
741 * MPT FW download function. Cast the arg into the mpt_fw_xfer structure.
742 * This structure contains: iocnum, firmware length (bytes),
743 * pointer to user space memory where the fw image is stored.
744 *
745 * Outputs: None.
746 * Return: 0 if successful
747 * -EFAULT if data unavailable
748 * -ENXIO if no such device
749 * -EAGAIN if resource problem
750 * -ENOMEM if no memory for SGE
751 * -EMLINK if too many chain buffers required
752 * -EBADRQC if adapter does not support FW download
753 * -EBUSY if adapter is busy
754 * -ENOMSG if FW upload returned bad status
755 */
756static int
757mptctl_fw_download(unsigned long arg)
758{
759 struct mpt_fw_xfer __user *ufwdl = (void __user *) arg;
760 struct mpt_fw_xfer kfwdl;
761
762 if (copy_from_user(&kfwdl, ufwdl, sizeof(struct mpt_fw_xfer))) {
763 printk(KERN_ERR MYNAM "%s@%d::_ioctl_fwdl - "
764 "Unable to copy mpt_fw_xfer struct @ %p\n",
765 __FILE__, __LINE__, ufwdl);
766 return -EFAULT;
767 }
768
769 return mptctl_do_fw_download(kfwdl.iocnum, kfwdl.bufp, kfwdl.fwlen);
770}
771
772/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
773/*
774 * FW Download engine.
775 * Outputs: None.
776 * Return: 0 if successful
777 * -EFAULT if data unavailable
778 * -ENXIO if no such device
779 * -EAGAIN if resource problem
780 * -ENOMEM if no memory for SGE
781 * -EMLINK if too many chain buffers required
782 * -EBADRQC if adapter does not support FW download
783 * -EBUSY if adapter is busy
784 * -ENOMSG if FW upload returned bad status
785 */
786static int
787mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen)
788{
789 FWDownload_t *dlmsg;
790 MPT_FRAME_HDR *mf;
791 MPT_ADAPTER *iocp;
792 FWDownloadTCSGE_t *ptsge;
793 MptSge_t *sgl, *sgIn;
794 char *sgOut;
795 struct buflist *buflist;
796 struct buflist *bl;
797 dma_addr_t sgl_dma;
798 int ret;
799 int numfrags = 0;
800 int maxfrags;
801 int n = 0;
802 u32 sgdir;
803 u32 nib;
804 int fw_bytes_copied = 0;
805 int i;
806 int sge_offset = 0;
807 u16 iocstat;
808 pFWDownloadReply_t ReplyMsg = NULL;
809 unsigned long timeleft;
810
811 if (mpt_verify_adapter(ioc, &iocp) < 0) {
812 printk(KERN_DEBUG MYNAM "ioctl_fwdl - ioc%d not found!\n",
813 ioc);
814 return -ENODEV; /* (-6) No such device or address */
815 } else {
816
817 /* Valid device. Get a message frame and construct the FW download message.
818 */
819 if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL)
820 return -EAGAIN;
821 }
822
823 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT
824 "mptctl_do_fwdl called. mptctl_id = %xh.\n", iocp->name, mptctl_id));
825 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.bufp = %p\n",
826 iocp->name, ufwbuf));
827 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.fwlen = %d\n",
828 iocp->name, (int)fwlen));
829 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.ioc = %04xh\n",
830 iocp->name, ioc));
831
832 dlmsg = (FWDownload_t*) mf;
833 ptsge = (FWDownloadTCSGE_t *) &dlmsg->SGL;
834 sgOut = (char *) (ptsge + 1);
835
836 /*
837 * Construct f/w download request
838 */
839 dlmsg->ImageType = MPI_FW_DOWNLOAD_ITYPE_FW;
840 dlmsg->Reserved = 0;
841 dlmsg->ChainOffset = 0;
842 dlmsg->Function = MPI_FUNCTION_FW_DOWNLOAD;
843 dlmsg->Reserved1[0] = dlmsg->Reserved1[1] = dlmsg->Reserved1[2] = 0;
844 if (iocp->facts.MsgVersion >= MPI_VERSION_01_05)
845 dlmsg->MsgFlags = MPI_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT;
846 else
847 dlmsg->MsgFlags = 0;
848
849
850 /* Set up the Transaction SGE.
851 */
852 ptsge->Reserved = 0;
853 ptsge->ContextSize = 0;
854 ptsge->DetailsLength = 12;
855 ptsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
856 ptsge->Reserved_0100_Checksum = 0;
857 ptsge->ImageOffset = 0;
858 ptsge->ImageSize = cpu_to_le32(fwlen);
859
860 /* Add the SGL
861 */
862
863 /*
864 * Need to kmalloc area(s) for holding firmware image bytes.
865 * But we need to do it piece meal, using a proper
866 * scatter gather list (with 128kB MAX hunks).
867 *
868 * A practical limit here might be # of sg hunks that fit into
869 * a single IOC request frame; 12 or 8 (see below), so:
870 * For FC9xx: 12 x 128kB == 1.5 mB (max)
871 * For C1030: 8 x 128kB == 1 mB (max)
872 * We could support chaining, but things get ugly(ier:)
873 *
874 * Set the sge_offset to the start of the sgl (bytes).
875 */
876 sgdir = 0x04000000; /* IOC will READ from sys mem */
877 sge_offset = sizeof(MPIHeader_t) + sizeof(FWDownloadTCSGE_t);
878 if ((sgl = kbuf_alloc_2_sgl(fwlen, sgdir, sge_offset,
879 &numfrags, &buflist, &sgl_dma, iocp)) == NULL)
880 return -ENOMEM;
881
882 /*
883 * We should only need SGL with 2 simple_32bit entries (up to 256 kB)
884 * for FC9xx f/w image, but calculate max number of sge hunks
885 * we can fit into a request frame, and limit ourselves to that.
886 * (currently no chain support)
887 * maxfrags = (Request Size - FWdownload Size ) / Size of 32 bit SGE
888 * Request maxfrags
889 * 128 12
890 * 96 8
891 * 64 4
892 */
893 maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) -
894 sizeof(FWDownloadTCSGE_t))
895 / iocp->SGE_size;
896 if (numfrags > maxfrags) {
897 ret = -EMLINK;
898 goto fwdl_out;
899 }
900
901 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: sgl buffer = %p, sgfrags = %d\n",
902 iocp->name, sgl, numfrags));
903
904 /*
905 * Parse SG list, copying sgl itself,
906 * plus f/w image hunks from user space as we go...
907 */
908 ret = -EFAULT;
909 sgIn = sgl;
910 bl = buflist;
911 for (i=0; i < numfrags; i++) {
912
913 /* Get the SGE type: 0 - TCSGE, 3 - Chain, 1 - Simple SGE
914 * Skip everything but Simple. If simple, copy from
915 * user space into kernel space.
916 * Note: we should not have anything but Simple as
917 * Chain SGE are illegal.
918 */
919 nib = (sgIn->FlagsLength & 0x30000000) >> 28;
920 if (nib == 0 || nib == 3) {
921 ;
922 } else if (sgIn->Address) {
923 iocp->add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
924 n++;
925 if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) {
926 printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - "
927 "Unable to copy f/w buffer hunk#%d @ %p\n",
928 iocp->name, __FILE__, __LINE__, n, ufwbuf);
929 goto fwdl_out;
930 }
931 fw_bytes_copied += bl->len;
932 }
933 sgIn++;
934 bl++;
935 sgOut += iocp->SGE_size;
936 }
937
938 DBG_DUMP_FW_DOWNLOAD(iocp, (u32 *)mf, numfrags);
939
940 /*
941 * Finally, perform firmware download.
942 */
943 ReplyMsg = NULL;
944 SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, dlmsg->MsgContext);
945 INITIALIZE_MGMT_STATUS(iocp->ioctl_cmds.status)
946 mpt_put_msg_frame(mptctl_id, iocp, mf);
947
948 /* Now wait for the command to complete */
949retry_wait:
950 timeleft = wait_for_completion_timeout(&iocp->ioctl_cmds.done, HZ*60);
951 if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
952 ret = -ETIME;
953 printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
954 if (iocp->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
955 mpt_free_msg_frame(iocp, mf);
956 goto fwdl_out;
957 }
958 if (!timeleft) {
959 printk(MYIOC_s_WARN_FMT
960 "FW download timeout, doorbell=0x%08x\n",
961 iocp->name, mpt_GetIocState(iocp, 0));
962 mptctl_timeout_expired(iocp, mf);
963 } else
964 goto retry_wait;
965 goto fwdl_out;
966 }
967
968 if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
969 printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
970 mpt_free_msg_frame(iocp, mf);
971 ret = -ENODATA;
972 goto fwdl_out;
973 }
974
975 if (sgl)
976 kfree_sgl(sgl, sgl_dma, buflist, iocp);
977
978 ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
979 iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
980 if (iocstat == MPI_IOCSTATUS_SUCCESS) {
981 printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name);
982 return 0;
983 } else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) {
984 printk(MYIOC_s_WARN_FMT "Hmmm... F/W download not supported!?!\n",
985 iocp->name);
986 printk(MYIOC_s_WARN_FMT "(time to go bang on somebodies door)\n",
987 iocp->name);
988 return -EBADRQC;
989 } else if (iocstat == MPI_IOCSTATUS_BUSY) {
990 printk(MYIOC_s_WARN_FMT "IOC_BUSY!\n", iocp->name);
991 printk(MYIOC_s_WARN_FMT "(try again later?)\n", iocp->name);
992 return -EBUSY;
993 } else {
994 printk(MYIOC_s_WARN_FMT "ioctl_fwdl() returned [bad] status = %04xh\n",
995 iocp->name, iocstat);
996 printk(MYIOC_s_WARN_FMT "(bad VooDoo)\n", iocp->name);
997 return -ENOMSG;
998 }
999 return 0;
1000
1001fwdl_out:
1002
1003 CLEAR_MGMT_STATUS(iocp->ioctl_cmds.status);
1004 SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, 0);
1005 kfree_sgl(sgl, sgl_dma, buflist, iocp);
1006 return ret;
1007}
1008
1009/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1010/*
1011 * SGE Allocation routine
1012 *
1013 * Inputs: bytes - number of bytes to be transferred
1014 * sgdir - data direction
1015 * sge_offset - offset (in bytes) from the start of the request
1016 * frame to the first SGE
1017 * ioc - pointer to the mptadapter
1018 * Outputs: frags - number of scatter gather elements
1019 * blp - point to the buflist pointer
1020 * sglbuf_dma - pointer to the (dma) sgl
1021 * Returns: Null if failes
1022 * pointer to the (virtual) sgl if successful.
1023 */
1024static MptSge_t *
1025kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags,
1026 struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc)
1027{
1028 MptSge_t *sglbuf = NULL; /* pointer to array of SGE */
1029 /* and chain buffers */
1030 struct buflist *buflist = NULL; /* kernel routine */
1031 MptSge_t *sgl;
1032 int numfrags = 0;
1033 int fragcnt = 0;
1034 int alloc_sz = min(bytes,MAX_KMALLOC_SZ); // avoid kernel warning msg!
1035 int bytes_allocd = 0;
1036 int this_alloc;
1037 dma_addr_t pa; // phys addr
1038 int i, buflist_ent;
1039 int sg_spill = MAX_FRAGS_SPILL1;
1040 int dir;
1041
1042 if (bytes < 0)
1043 return NULL;
1044
1045 /* initialization */
1046 *frags = 0;
1047 *blp = NULL;
1048
1049 /* Allocate and initialize an array of kernel
1050 * structures for the SG elements.
1051 */
1052 i = MAX_SGL_BYTES / 8;
1053 buflist = kzalloc(i, GFP_USER);
1054 if (!buflist)
1055 return NULL;
1056 buflist_ent = 0;
1057
1058 /* Allocate a single block of memory to store the sg elements and
1059 * the chain buffers. The calling routine is responsible for
1060 * copying the data in this array into the correct place in the
1061 * request and chain buffers.
1062 */
1063 sglbuf = pci_alloc_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf_dma);
1064 if (sglbuf == NULL)
1065 goto free_and_fail;
1066
1067 if (sgdir & 0x04000000)
1068 dir = PCI_DMA_TODEVICE;
1069 else
1070 dir = PCI_DMA_FROMDEVICE;
1071
1072 /* At start:
1073 * sgl = sglbuf = point to beginning of sg buffer
1074 * buflist_ent = 0 = first kernel structure
1075 * sg_spill = number of SGE that can be written before the first
1076 * chain element.
1077 *
1078 */
1079 sgl = sglbuf;
1080 sg_spill = ((ioc->req_sz - sge_offset)/ioc->SGE_size) - 1;
1081 while (bytes_allocd < bytes) {
1082 this_alloc = min(alloc_sz, bytes-bytes_allocd);
1083 buflist[buflist_ent].len = this_alloc;
1084 buflist[buflist_ent].kptr = pci_alloc_consistent(ioc->pcidev,
1085 this_alloc,
1086 &pa);
1087 if (buflist[buflist_ent].kptr == NULL) {
1088 alloc_sz = alloc_sz / 2;
1089 if (alloc_sz == 0) {
1090 printk(MYIOC_s_WARN_FMT "-SG: No can do - "
1091 "not enough memory! :-(\n", ioc->name);
1092 printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n",
1093 ioc->name, numfrags);
1094 goto free_and_fail;
1095 }
1096 continue;
1097 } else {
1098 dma_addr_t dma_addr;
1099
1100 bytes_allocd += this_alloc;
1101 sgl->FlagsLength = (0x10000000|sgdir|this_alloc);
1102 dma_addr = pci_map_single(ioc->pcidev,
1103 buflist[buflist_ent].kptr, this_alloc, dir);
1104 sgl->Address = dma_addr;
1105
1106 fragcnt++;
1107 numfrags++;
1108 sgl++;
1109 buflist_ent++;
1110 }
1111
1112 if (bytes_allocd >= bytes)
1113 break;
1114
1115 /* Need to chain? */
1116 if (fragcnt == sg_spill) {
1117 printk(MYIOC_s_WARN_FMT
1118 "-SG: No can do - " "Chain required! :-(\n", ioc->name);
1119 printk(MYIOC_s_WARN_FMT "(freeing %d frags)\n", ioc->name, numfrags);
1120 goto free_and_fail;
1121 }
1122
1123 /* overflow check... */
1124 if (numfrags*8 > MAX_SGL_BYTES){
1125 /* GRRRRR... */
1126 printk(MYIOC_s_WARN_FMT "-SG: No can do - "
1127 "too many SG frags! :-(\n", ioc->name);
1128 printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n",
1129 ioc->name, numfrags);
1130 goto free_and_fail;
1131 }
1132 }
1133
1134 /* Last sge fixup: set LE+eol+eob bits */
1135 sgl[-1].FlagsLength |= 0xC1000000;
1136
1137 *frags = numfrags;
1138 *blp = buflist;
1139
1140 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - "
1141 "%d SG frags generated!\n", ioc->name, numfrags));
1142
1143 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - "
1144 "last (big) alloc_sz=%d\n", ioc->name, alloc_sz));
1145
1146 return sglbuf;
1147
1148free_and_fail:
1149 if (sglbuf != NULL) {
1150 for (i = 0; i < numfrags; i++) {
1151 dma_addr_t dma_addr;
1152 u8 *kptr;
1153 int len;
1154
1155 if ((sglbuf[i].FlagsLength >> 24) == 0x30)
1156 continue;
1157
1158 dma_addr = sglbuf[i].Address;
1159 kptr = buflist[i].kptr;
1160 len = buflist[i].len;
1161
1162 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr);
1163 }
1164 pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf, *sglbuf_dma);
1165 }
1166 kfree(buflist);
1167 return NULL;
1168}
1169
1170/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1171/*
1172 * Routine to free the SGL elements.
1173 */
1174static void
1175kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, struct buflist *buflist, MPT_ADAPTER *ioc)
1176{
1177 MptSge_t *sg = sgl;
1178 struct buflist *bl = buflist;
1179 u32 nib;
1180 int dir;
1181 int n = 0;
1182
1183 if (sg->FlagsLength & 0x04000000)
1184 dir = PCI_DMA_TODEVICE;
1185 else
1186 dir = PCI_DMA_FROMDEVICE;
1187
1188 nib = (sg->FlagsLength & 0xF0000000) >> 28;
1189 while (! (nib & 0x4)) { /* eob */
1190 /* skip ignore/chain. */
1191 if (nib == 0 || nib == 3) {
1192 ;
1193 } else if (sg->Address) {
1194 dma_addr_t dma_addr;
1195 void *kptr;
1196 int len;
1197
1198 dma_addr = sg->Address;
1199 kptr = bl->kptr;
1200 len = bl->len;
1201 pci_unmap_single(ioc->pcidev, dma_addr, len, dir);
1202 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr);
1203 n++;
1204 }
1205 sg++;
1206 bl++;
1207 nib = (le32_to_cpu(sg->FlagsLength) & 0xF0000000) >> 28;
1208 }
1209
1210 /* we're at eob! */
1211 if (sg->Address) {
1212 dma_addr_t dma_addr;
1213 void *kptr;
1214 int len;
1215
1216 dma_addr = sg->Address;
1217 kptr = bl->kptr;
1218 len = bl->len;
1219 pci_unmap_single(ioc->pcidev, dma_addr, len, dir);
1220 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr);
1221 n++;
1222 }
1223
1224 pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sgl, sgl_dma);
1225 kfree(buflist);
1226 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: Free'd 1 SGL buf + %d kbufs!\n",
1227 ioc->name, n));
1228}
1229
1230/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1231/*
1232 * mptctl_getiocinfo - Query the host adapter for IOC information.
1233 * @arg: User space argument
1234 *
1235 * Outputs: None.
1236 * Return: 0 if successful
1237 * -EFAULT if data unavailable
1238 * -ENODEV if no such device/adapter
1239 */
1240static int
1241mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
1242{
1243 struct mpt_ioctl_iocinfo __user *uarg = (void __user *) arg;
1244 struct mpt_ioctl_iocinfo *karg;
1245 MPT_ADAPTER *ioc;
1246 struct pci_dev *pdev;
1247 int iocnum;
1248 unsigned int port;
1249 int cim_rev;
1250 struct scsi_device *sdev;
1251 VirtDevice *vdevice;
1252
1253 /* Add of PCI INFO results in unaligned access for
1254 * IA64 and Sparc. Reset long to int. Return no PCI
1255 * data for obsolete format.
1256 */
1257 if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev0))
1258 cim_rev = 0;
1259 else if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev1))
1260 cim_rev = 1;
1261 else if (data_size == sizeof(struct mpt_ioctl_iocinfo))
1262 cim_rev = 2;
1263 else if (data_size == (sizeof(struct mpt_ioctl_iocinfo_rev0)+12))
1264 cim_rev = 0; /* obsolete */
1265 else
1266 return -EFAULT;
1267
1268 karg = memdup_user(uarg, data_size);
1269 if (IS_ERR(karg)) {
1270 printk(KERN_ERR MYNAM "%s@%d::mpt_ioctl_iocinfo() - memdup_user returned error [%ld]\n",
1271 __FILE__, __LINE__, PTR_ERR(karg));
1272 return PTR_ERR(karg);
1273 }
1274
1275 if (((iocnum = mpt_verify_adapter(karg->hdr.iocnum, &ioc)) < 0) ||
1276 (ioc == NULL)) {
1277 printk(KERN_DEBUG MYNAM "%s::mptctl_getiocinfo() @%d - ioc%d not found!\n",
1278 __FILE__, __LINE__, iocnum);
1279 kfree(karg);
1280 return -ENODEV;
1281 }
1282
1283 /* Verify the data transfer size is correct. */
1284 if (karg->hdr.maxDataSize != data_size) {
1285 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - "
1286 "Structure size mismatch. Command not completed.\n",
1287 ioc->name, __FILE__, __LINE__);
1288 kfree(karg);
1289 return -EFAULT;
1290 }
1291
1292 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_getiocinfo called.\n",
1293 ioc->name));
1294
1295 /* Fill in the data and return the structure to the calling
1296 * program
1297 */
1298 if (ioc->bus_type == SAS)
1299 karg->adapterType = MPT_IOCTL_INTERFACE_SAS;
1300 else if (ioc->bus_type == FC)
1301 karg->adapterType = MPT_IOCTL_INTERFACE_FC;
1302 else
1303 karg->adapterType = MPT_IOCTL_INTERFACE_SCSI;
1304
1305 if (karg->hdr.port > 1) {
1306 kfree(karg);
1307 return -EINVAL;
1308 }
1309 port = karg->hdr.port;
1310
1311 karg->port = port;
1312 pdev = (struct pci_dev *) ioc->pcidev;
1313
1314 karg->pciId = pdev->device;
1315 karg->hwRev = pdev->revision;
1316 karg->subSystemDevice = pdev->subsystem_device;
1317 karg->subSystemVendor = pdev->subsystem_vendor;
1318
1319 if (cim_rev == 1) {
1320 /* Get the PCI bus, device, and function numbers for the IOC
1321 */
1322 karg->pciInfo.u.bits.busNumber = pdev->bus->number;
1323 karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn );
1324 karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
1325 } else if (cim_rev == 2) {
1326 /* Get the PCI bus, device, function and segment ID numbers
1327 for the IOC */
1328 karg->pciInfo.u.bits.busNumber = pdev->bus->number;
1329 karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn );
1330 karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
1331 karg->pciInfo.segmentID = pci_domain_nr(pdev->bus);
1332 }
1333
1334 /* Get number of devices
1335 */
1336 karg->numDevices = 0;
1337 if (ioc->sh) {
1338 shost_for_each_device(sdev, ioc->sh) {
1339 vdevice = sdev->hostdata;
1340 if (vdevice == NULL || vdevice->vtarget == NULL)
1341 continue;
1342 if (vdevice->vtarget->tflags &
1343 MPT_TARGET_FLAGS_RAID_COMPONENT)
1344 continue;
1345 karg->numDevices++;
1346 }
1347 }
1348
1349 /* Set the BIOS and FW Version
1350 */
1351 karg->FWVersion = ioc->facts.FWVersion.Word;
1352 karg->BIOSVersion = ioc->biosVersion;
1353
1354 /* Set the Version Strings.
1355 */
1356 strncpy (karg->driverVersion, MPT_LINUX_PACKAGE_NAME, MPT_IOCTL_VERSION_LENGTH);
1357 karg->driverVersion[MPT_IOCTL_VERSION_LENGTH-1]='\0';
1358
1359 karg->busChangeEvent = 0;
1360 karg->hostId = ioc->pfacts[port].PortSCSIID;
1361 karg->rsvd[0] = karg->rsvd[1] = 0;
1362
1363 /* Copy the data from kernel memory to user memory
1364 */
1365 if (copy_to_user((char __user *)arg, karg, data_size)) {
1366 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - "
1367 "Unable to write out mpt_ioctl_iocinfo struct @ %p\n",
1368 ioc->name, __FILE__, __LINE__, uarg);
1369 kfree(karg);
1370 return -EFAULT;
1371 }
1372
1373 kfree(karg);
1374 return 0;
1375}
1376
1377/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1378/*
1379 * mptctl_gettargetinfo - Query the host adapter for target information.
1380 * @arg: User space argument
1381 *
1382 * Outputs: None.
1383 * Return: 0 if successful
1384 * -EFAULT if data unavailable
1385 * -ENODEV if no such device/adapter
1386 */
1387static int
1388mptctl_gettargetinfo (unsigned long arg)
1389{
1390 struct mpt_ioctl_targetinfo __user *uarg = (void __user *) arg;
1391 struct mpt_ioctl_targetinfo karg;
1392 MPT_ADAPTER *ioc;
1393 VirtDevice *vdevice;
1394 char *pmem;
1395 int *pdata;
1396 int iocnum;
1397 int numDevices = 0;
1398 int lun;
1399 int maxWordsLeft;
1400 int numBytes;
1401 u8 port;
1402 struct scsi_device *sdev;
1403
1404 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_targetinfo))) {
1405 printk(KERN_ERR MYNAM "%s@%d::mptctl_gettargetinfo - "
1406 "Unable to read in mpt_ioctl_targetinfo struct @ %p\n",
1407 __FILE__, __LINE__, uarg);
1408 return -EFAULT;
1409 }
1410
1411 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
1412 (ioc == NULL)) {
1413 printk(KERN_DEBUG MYNAM "%s::mptctl_gettargetinfo() @%d - ioc%d not found!\n",
1414 __FILE__, __LINE__, iocnum);
1415 return -ENODEV;
1416 }
1417
1418 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_gettargetinfo called.\n",
1419 ioc->name));
1420 /* Get the port number and set the maximum number of bytes
1421 * in the returned structure.
1422 * Ignore the port setting.
1423 */
1424 numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header);
1425 maxWordsLeft = numBytes/sizeof(int);
1426 port = karg.hdr.port;
1427
1428 if (maxWordsLeft <= 0) {
1429 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n",
1430 ioc->name, __FILE__, __LINE__);
1431 return -ENOMEM;
1432 }
1433
1434 /* Fill in the data and return the structure to the calling
1435 * program
1436 */
1437
1438 /* struct mpt_ioctl_targetinfo does not contain sufficient space
1439 * for the target structures so when the IOCTL is called, there is
1440 * not sufficient stack space for the structure. Allocate memory,
1441 * populate the memory, copy back to the user, then free memory.
1442 * targetInfo format:
1443 * bits 31-24: reserved
1444 * 23-16: LUN
1445 * 15- 8: Bus Number
1446 * 7- 0: Target ID
1447 */
1448 pmem = kzalloc(numBytes, GFP_KERNEL);
1449 if (!pmem) {
1450 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n",
1451 ioc->name, __FILE__, __LINE__);
1452 return -ENOMEM;
1453 }
1454 pdata = (int *) pmem;
1455
1456 /* Get number of devices
1457 */
1458 if (ioc->sh){
1459 shost_for_each_device(sdev, ioc->sh) {
1460 if (!maxWordsLeft)
1461 continue;
1462 vdevice = sdev->hostdata;
1463 if (vdevice == NULL || vdevice->vtarget == NULL)
1464 continue;
1465 if (vdevice->vtarget->tflags &
1466 MPT_TARGET_FLAGS_RAID_COMPONENT)
1467 continue;
1468 lun = (vdevice->vtarget->raidVolume) ? 0x80 : vdevice->lun;
1469 *pdata = (((u8)lun << 16) + (vdevice->vtarget->channel << 8) +
1470 (vdevice->vtarget->id ));
1471 pdata++;
1472 numDevices++;
1473 --maxWordsLeft;
1474 }
1475 }
1476 karg.numDevices = numDevices;
1477
1478 /* Copy part of the data from kernel memory to user memory
1479 */
1480 if (copy_to_user((char __user *)arg, &karg,
1481 sizeof(struct mpt_ioctl_targetinfo))) {
1482 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - "
1483 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n",
1484 ioc->name, __FILE__, __LINE__, uarg);
1485 kfree(pmem);
1486 return -EFAULT;
1487 }
1488
1489 /* Copy the remaining data from kernel memory to user memory
1490 */
1491 if (copy_to_user(uarg->targetInfo, pmem, numBytes)) {
1492 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - "
1493 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n",
1494 ioc->name, __FILE__, __LINE__, pdata);
1495 kfree(pmem);
1496 return -EFAULT;
1497 }
1498
1499 kfree(pmem);
1500
1501 return 0;
1502}
1503
1504/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1505/* MPT IOCTL Test function.
1506 *
1507 * Outputs: None.
1508 * Return: 0 if successful
1509 * -EFAULT if data unavailable
1510 * -ENODEV if no such device/adapter
1511 */
1512static int
1513mptctl_readtest (unsigned long arg)
1514{
1515 struct mpt_ioctl_test __user *uarg = (void __user *) arg;
1516 struct mpt_ioctl_test karg;
1517 MPT_ADAPTER *ioc;
1518 int iocnum;
1519
1520 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_test))) {
1521 printk(KERN_ERR MYNAM "%s@%d::mptctl_readtest - "
1522 "Unable to read in mpt_ioctl_test struct @ %p\n",
1523 __FILE__, __LINE__, uarg);
1524 return -EFAULT;
1525 }
1526
1527 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
1528 (ioc == NULL)) {
1529 printk(KERN_DEBUG MYNAM "%s::mptctl_readtest() @%d - ioc%d not found!\n",
1530 __FILE__, __LINE__, iocnum);
1531 return -ENODEV;
1532 }
1533
1534 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_readtest called.\n",
1535 ioc->name));
1536 /* Fill in the data and return the structure to the calling
1537 * program
1538 */
1539
1540#ifdef MFCNT
1541 karg.chip_type = ioc->mfcnt;
1542#else
1543 karg.chip_type = ioc->pcidev->device;
1544#endif
1545 strncpy (karg.name, ioc->name, MPT_MAX_NAME);
1546 karg.name[MPT_MAX_NAME-1]='\0';
1547 strncpy (karg.product, ioc->prod_name, MPT_PRODUCT_LENGTH);
1548 karg.product[MPT_PRODUCT_LENGTH-1]='\0';
1549
1550 /* Copy the data from kernel memory to user memory
1551 */
1552 if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_test))) {
1553 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_readtest - "
1554 "Unable to write out mpt_ioctl_test struct @ %p\n",
1555 ioc->name, __FILE__, __LINE__, uarg);
1556 return -EFAULT;
1557 }
1558
1559 return 0;
1560}
1561
1562/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1563/*
1564 * mptctl_eventquery - Query the host adapter for the event types
1565 * that are being logged.
1566 * @arg: User space argument
1567 *
1568 * Outputs: None.
1569 * Return: 0 if successful
1570 * -EFAULT if data unavailable
1571 * -ENODEV if no such device/adapter
1572 */
1573static int
1574mptctl_eventquery (unsigned long arg)
1575{
1576 struct mpt_ioctl_eventquery __user *uarg = (void __user *) arg;
1577 struct mpt_ioctl_eventquery karg;
1578 MPT_ADAPTER *ioc;
1579 int iocnum;
1580
1581 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventquery))) {
1582 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventquery - "
1583 "Unable to read in mpt_ioctl_eventquery struct @ %p\n",
1584 __FILE__, __LINE__, uarg);
1585 return -EFAULT;
1586 }
1587
1588 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
1589 (ioc == NULL)) {
1590 printk(KERN_DEBUG MYNAM "%s::mptctl_eventquery() @%d - ioc%d not found!\n",
1591 __FILE__, __LINE__, iocnum);
1592 return -ENODEV;
1593 }
1594
1595 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventquery called.\n",
1596 ioc->name));
1597 karg.eventEntries = MPTCTL_EVENT_LOG_SIZE;
1598 karg.eventTypes = ioc->eventTypes;
1599
1600 /* Copy the data from kernel memory to user memory
1601 */
1602 if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_eventquery))) {
1603 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventquery - "
1604 "Unable to write out mpt_ioctl_eventquery struct @ %p\n",
1605 ioc->name, __FILE__, __LINE__, uarg);
1606 return -EFAULT;
1607 }
1608 return 0;
1609}
1610
1611/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1612static int
1613mptctl_eventenable (unsigned long arg)
1614{
1615 struct mpt_ioctl_eventenable __user *uarg = (void __user *) arg;
1616 struct mpt_ioctl_eventenable karg;
1617 MPT_ADAPTER *ioc;
1618 int iocnum;
1619
1620 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventenable))) {
1621 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventenable - "
1622 "Unable to read in mpt_ioctl_eventenable struct @ %p\n",
1623 __FILE__, __LINE__, uarg);
1624 return -EFAULT;
1625 }
1626
1627 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
1628 (ioc == NULL)) {
1629 printk(KERN_DEBUG MYNAM "%s::mptctl_eventenable() @%d - ioc%d not found!\n",
1630 __FILE__, __LINE__, iocnum);
1631 return -ENODEV;
1632 }
1633
1634 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventenable called.\n",
1635 ioc->name));
1636 if (ioc->events == NULL) {
1637 /* Have not yet allocated memory - do so now.
1638 */
1639 int sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
1640 ioc->events = kzalloc(sz, GFP_KERNEL);
1641 if (!ioc->events) {
1642 printk(MYIOC_s_ERR_FMT
1643 ": ERROR - Insufficient memory to add adapter!\n",
1644 ioc->name);
1645 return -ENOMEM;
1646 }
1647 ioc->alloc_total += sz;
1648
1649 ioc->eventContext = 0;
1650 }
1651
1652 /* Update the IOC event logging flag.
1653 */
1654 ioc->eventTypes = karg.eventTypes;
1655
1656 return 0;
1657}
1658
1659/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1660static int
1661mptctl_eventreport (unsigned long arg)
1662{
1663 struct mpt_ioctl_eventreport __user *uarg = (void __user *) arg;
1664 struct mpt_ioctl_eventreport karg;
1665 MPT_ADAPTER *ioc;
1666 int iocnum;
1667 int numBytes, maxEvents, max;
1668
1669 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventreport))) {
1670 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventreport - "
1671 "Unable to read in mpt_ioctl_eventreport struct @ %p\n",
1672 __FILE__, __LINE__, uarg);
1673 return -EFAULT;
1674 }
1675
1676 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
1677 (ioc == NULL)) {
1678 printk(KERN_DEBUG MYNAM "%s::mptctl_eventreport() @%d - ioc%d not found!\n",
1679 __FILE__, __LINE__, iocnum);
1680 return -ENODEV;
1681 }
1682 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventreport called.\n",
1683 ioc->name));
1684
1685 numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header);
1686 maxEvents = numBytes/sizeof(MPT_IOCTL_EVENTS);
1687
1688
1689 max = MPTCTL_EVENT_LOG_SIZE < maxEvents ? MPTCTL_EVENT_LOG_SIZE : maxEvents;
1690
1691 /* If fewer than 1 event is requested, there must have
1692 * been some type of error.
1693 */
1694 if ((max < 1) || !ioc->events)
1695 return -ENODATA;
1696
1697 /* reset this flag so SIGIO can restart */
1698 ioc->aen_event_read_flag=0;
1699
1700 /* Copy the data from kernel memory to user memory
1701 */
1702 numBytes = max * sizeof(MPT_IOCTL_EVENTS);
1703 if (copy_to_user(uarg->eventData, ioc->events, numBytes)) {
1704 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventreport - "
1705 "Unable to write out mpt_ioctl_eventreport struct @ %p\n",
1706 ioc->name, __FILE__, __LINE__, ioc->events);
1707 return -EFAULT;
1708 }
1709
1710 return 0;
1711}
1712
1713/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1714static int
1715mptctl_replace_fw (unsigned long arg)
1716{
1717 struct mpt_ioctl_replace_fw __user *uarg = (void __user *) arg;
1718 struct mpt_ioctl_replace_fw karg;
1719 MPT_ADAPTER *ioc;
1720 int iocnum;
1721 int newFwSize;
1722
1723 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_replace_fw))) {
1724 printk(KERN_ERR MYNAM "%s@%d::mptctl_replace_fw - "
1725 "Unable to read in mpt_ioctl_replace_fw struct @ %p\n",
1726 __FILE__, __LINE__, uarg);
1727 return -EFAULT;
1728 }
1729
1730 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
1731 (ioc == NULL)) {
1732 printk(KERN_DEBUG MYNAM "%s::mptctl_replace_fw() @%d - ioc%d not found!\n",
1733 __FILE__, __LINE__, iocnum);
1734 return -ENODEV;
1735 }
1736
1737 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_replace_fw called.\n",
1738 ioc->name));
1739 /* If caching FW, Free the old FW image
1740 */
1741 if (ioc->cached_fw == NULL)
1742 return 0;
1743
1744 mpt_free_fw_memory(ioc);
1745
1746 /* Allocate memory for the new FW image
1747 */
1748 newFwSize = ALIGN(karg.newImageSize, 4);
1749
1750 mpt_alloc_fw_memory(ioc, newFwSize);
1751 if (ioc->cached_fw == NULL)
1752 return -ENOMEM;
1753
1754 /* Copy the data from user memory to kernel space
1755 */
1756 if (copy_from_user(ioc->cached_fw, uarg->newImage, newFwSize)) {
1757 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_replace_fw - "
1758 "Unable to read in mpt_ioctl_replace_fw image "
1759 "@ %p\n", ioc->name, __FILE__, __LINE__, uarg);
1760 mpt_free_fw_memory(ioc);
1761 return -EFAULT;
1762 }
1763
1764 /* Update IOCFactsReply
1765 */
1766 ioc->facts.FWImageSize = newFwSize;
1767 return 0;
1768}
1769
1770/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1771/* MPT IOCTL MPTCOMMAND function.
1772 * Cast the arg into the mpt_ioctl_mpt_command structure.
1773 *
1774 * Outputs: None.
1775 * Return: 0 if successful
1776 * -EBUSY if previous command timeout and IOC reset is not complete.
1777 * -EFAULT if data unavailable
1778 * -ENODEV if no such device/adapter
1779 * -ETIME if timer expires
1780 * -ENOMEM if memory allocation error
1781 */
1782static int
1783mptctl_mpt_command (unsigned long arg)
1784{
1785 struct mpt_ioctl_command __user *uarg = (void __user *) arg;
1786 struct mpt_ioctl_command karg;
1787 MPT_ADAPTER *ioc;
1788 int iocnum;
1789 int rc;
1790
1791
1792 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_command))) {
1793 printk(KERN_ERR MYNAM "%s@%d::mptctl_mpt_command - "
1794 "Unable to read in mpt_ioctl_command struct @ %p\n",
1795 __FILE__, __LINE__, uarg);
1796 return -EFAULT;
1797 }
1798
1799 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
1800 (ioc == NULL)) {
1801 printk(KERN_DEBUG MYNAM "%s::mptctl_mpt_command() @%d - ioc%d not found!\n",
1802 __FILE__, __LINE__, iocnum);
1803 return -ENODEV;
1804 }
1805
1806 rc = mptctl_do_mpt_command (karg, &uarg->MF);
1807
1808 return rc;
1809}
1810
1811/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1812/* Worker routine for the IOCTL MPTCOMMAND and MPTCOMMAND32 (sparc) commands.
1813 *
1814 * Outputs: None.
1815 * Return: 0 if successful
1816 * -EBUSY if previous command timeout and IOC reset is not complete.
1817 * -EFAULT if data unavailable
1818 * -ENODEV if no such device/adapter
1819 * -ETIME if timer expires
1820 * -ENOMEM if memory allocation error
1821 * -EPERM if SCSI I/O and target is untagged
1822 */
1823static int
1824mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
1825{
1826 MPT_ADAPTER *ioc;
1827 MPT_FRAME_HDR *mf = NULL;
1828 MPIHeader_t *hdr;
1829 char *psge;
1830 struct buflist bufIn; /* data In buffer */
1831 struct buflist bufOut; /* data Out buffer */
1832 dma_addr_t dma_addr_in;
1833 dma_addr_t dma_addr_out;
1834 int sgSize = 0; /* Num SG elements */
1835 int iocnum, flagsLength;
1836 int sz, rc = 0;
1837 int msgContext;
1838 u16 req_idx;
1839 ulong timeout;
1840 unsigned long timeleft;
1841 struct scsi_device *sdev;
1842 unsigned long flags;
1843 u8 function;
1844
1845 /* bufIn and bufOut are used for user to kernel space transfers
1846 */
1847 bufIn.kptr = bufOut.kptr = NULL;
1848 bufIn.len = bufOut.len = 0;
1849
1850 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
1851 (ioc == NULL)) {
1852 printk(KERN_DEBUG MYNAM "%s::mptctl_do_mpt_command() @%d - ioc%d not found!\n",
1853 __FILE__, __LINE__, iocnum);
1854 return -ENODEV;
1855 }
1856
1857 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
1858 if (ioc->ioc_reset_in_progress) {
1859 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
1860 printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
1861 "Busy with diagnostic reset\n", __FILE__, __LINE__);
1862 return -EBUSY;
1863 }
1864 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
1865
1866 /* Basic sanity checks to prevent underflows or integer overflows */
1867 if (karg.maxReplyBytes < 0 ||
1868 karg.dataInSize < 0 ||
1869 karg.dataOutSize < 0 ||
1870 karg.dataSgeOffset < 0 ||
1871 karg.maxSenseBytes < 0 ||
1872 karg.dataSgeOffset > ioc->req_sz / 4)
1873 return -EINVAL;
1874
1875 /* Verify that the final request frame will not be too large.
1876 */
1877 sz = karg.dataSgeOffset * 4;
1878 if (karg.dataInSize > 0)
1879 sz += ioc->SGE_size;
1880 if (karg.dataOutSize > 0)
1881 sz += ioc->SGE_size;
1882
1883 if (sz > ioc->req_sz) {
1884 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1885 "Request frame too large (%d) maximum (%d)\n",
1886 ioc->name, __FILE__, __LINE__, sz, ioc->req_sz);
1887 return -EFAULT;
1888 }
1889
1890 /* Get a free request frame and save the message context.
1891 */
1892 if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL)
1893 return -EAGAIN;
1894
1895 hdr = (MPIHeader_t *) mf;
1896 msgContext = le32_to_cpu(hdr->MsgContext);
1897 req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
1898
1899 /* Copy the request frame
1900 * Reset the saved message context.
1901 * Request frame in user space
1902 */
1903 if (copy_from_user(mf, mfPtr, karg.dataSgeOffset * 4)) {
1904 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1905 "Unable to read MF from mpt_ioctl_command struct @ %p\n",
1906 ioc->name, __FILE__, __LINE__, mfPtr);
1907 function = -1;
1908 rc = -EFAULT;
1909 goto done_free_mem;
1910 }
1911 hdr->MsgContext = cpu_to_le32(msgContext);
1912 function = hdr->Function;
1913
1914
1915 /* Verify that this request is allowed.
1916 */
1917 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n",
1918 ioc->name, hdr->Function, mf));
1919
1920 switch (function) {
1921 case MPI_FUNCTION_IOC_FACTS:
1922 case MPI_FUNCTION_PORT_FACTS:
1923 karg.dataOutSize = karg.dataInSize = 0;
1924 break;
1925
1926 case MPI_FUNCTION_CONFIG:
1927 {
1928 Config_t *config_frame;
1929 config_frame = (Config_t *)mf;
1930 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\ttype=0x%02x ext_type=0x%02x "
1931 "number=0x%02x action=0x%02x\n", ioc->name,
1932 config_frame->Header.PageType,
1933 config_frame->ExtPageType,
1934 config_frame->Header.PageNumber,
1935 config_frame->Action));
1936 break;
1937 }
1938
1939 case MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND:
1940 case MPI_FUNCTION_FC_EX_LINK_SRVC_SEND:
1941 case MPI_FUNCTION_FW_UPLOAD:
1942 case MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
1943 case MPI_FUNCTION_FW_DOWNLOAD:
1944 case MPI_FUNCTION_FC_PRIMITIVE_SEND:
1945 case MPI_FUNCTION_TOOLBOX:
1946 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
1947 break;
1948
1949 case MPI_FUNCTION_SCSI_IO_REQUEST:
1950 if (ioc->sh) {
1951 SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
1952 int qtag = MPI_SCSIIO_CONTROL_UNTAGGED;
1953 int scsidir = 0;
1954 int dataSize;
1955 u32 id;
1956
1957 id = (ioc->devices_per_bus == 0) ? 256 : ioc->devices_per_bus;
1958 if (pScsiReq->TargetID > id) {
1959 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1960 "Target ID out of bounds. \n",
1961 ioc->name, __FILE__, __LINE__);
1962 rc = -ENODEV;
1963 goto done_free_mem;
1964 }
1965
1966 if (pScsiReq->Bus >= ioc->number_of_buses) {
1967 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1968 "Target Bus out of bounds. \n",
1969 ioc->name, __FILE__, __LINE__);
1970 rc = -ENODEV;
1971 goto done_free_mem;
1972 }
1973
1974 pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
1975 pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
1976
1977
1978 /* verify that app has not requested
1979 * more sense data than driver
1980 * can provide, if so, reset this parameter
1981 * set the sense buffer pointer low address
1982 * update the control field to specify Q type
1983 */
1984 if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE)
1985 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
1986 else
1987 pScsiReq->SenseBufferLength = karg.maxSenseBytes;
1988
1989 pScsiReq->SenseBufferLowAddr =
1990 cpu_to_le32(ioc->sense_buf_low_dma
1991 + (req_idx * MPT_SENSE_BUFFER_ALLOC));
1992
1993 shost_for_each_device(sdev, ioc->sh) {
1994 struct scsi_target *starget = scsi_target(sdev);
1995 VirtTarget *vtarget = starget->hostdata;
1996
1997 if (vtarget == NULL)
1998 continue;
1999
2000 if ((pScsiReq->TargetID == vtarget->id) &&
2001 (pScsiReq->Bus == vtarget->channel) &&
2002 (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
2003 qtag = MPI_SCSIIO_CONTROL_SIMPLEQ;
2004 }
2005
2006 /* Have the IOCTL driver set the direction based
2007 * on the dataOutSize (ordering issue with Sparc).
2008 */
2009 if (karg.dataOutSize > 0) {
2010 scsidir = MPI_SCSIIO_CONTROL_WRITE;
2011 dataSize = karg.dataOutSize;
2012 } else {
2013 scsidir = MPI_SCSIIO_CONTROL_READ;
2014 dataSize = karg.dataInSize;
2015 }
2016
2017 pScsiReq->Control = cpu_to_le32(scsidir | qtag);
2018 pScsiReq->DataLength = cpu_to_le32(dataSize);
2019
2020
2021 } else {
2022 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2023 "SCSI driver is not loaded. \n",
2024 ioc->name, __FILE__, __LINE__);
2025 rc = -EFAULT;
2026 goto done_free_mem;
2027 }
2028 break;
2029
2030 case MPI_FUNCTION_SMP_PASSTHROUGH:
2031 /* Check mf->PassthruFlags to determine if
2032 * transfer is ImmediateMode or not.
2033 * Immediate mode returns data in the ReplyFrame.
2034 * Else, we are sending request and response data
2035 * in two SGLs at the end of the mf.
2036 */
2037 break;
2038
2039 case MPI_FUNCTION_SATA_PASSTHROUGH:
2040 if (!ioc->sh) {
2041 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2042 "SCSI driver is not loaded. \n",
2043 ioc->name, __FILE__, __LINE__);
2044 rc = -EFAULT;
2045 goto done_free_mem;
2046 }
2047 break;
2048
2049 case MPI_FUNCTION_RAID_ACTION:
2050 /* Just add a SGE
2051 */
2052 break;
2053
2054 case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
2055 if (ioc->sh) {
2056 SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
2057 int qtag = MPI_SCSIIO_CONTROL_SIMPLEQ;
2058 int scsidir = MPI_SCSIIO_CONTROL_READ;
2059 int dataSize;
2060
2061 pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
2062 pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
2063
2064
2065 /* verify that app has not requested
2066 * more sense data than driver
2067 * can provide, if so, reset this parameter
2068 * set the sense buffer pointer low address
2069 * update the control field to specify Q type
2070 */
2071 if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE)
2072 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
2073 else
2074 pScsiReq->SenseBufferLength = karg.maxSenseBytes;
2075
2076 pScsiReq->SenseBufferLowAddr =
2077 cpu_to_le32(ioc->sense_buf_low_dma
2078 + (req_idx * MPT_SENSE_BUFFER_ALLOC));
2079
2080 /* All commands to physical devices are tagged
2081 */
2082
2083 /* Have the IOCTL driver set the direction based
2084 * on the dataOutSize (ordering issue with Sparc).
2085 */
2086 if (karg.dataOutSize > 0) {
2087 scsidir = MPI_SCSIIO_CONTROL_WRITE;
2088 dataSize = karg.dataOutSize;
2089 } else {
2090 scsidir = MPI_SCSIIO_CONTROL_READ;
2091 dataSize = karg.dataInSize;
2092 }
2093
2094 pScsiReq->Control = cpu_to_le32(scsidir | qtag);
2095 pScsiReq->DataLength = cpu_to_le32(dataSize);
2096
2097 } else {
2098 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2099 "SCSI driver is not loaded. \n",
2100 ioc->name, __FILE__, __LINE__);
2101 rc = -EFAULT;
2102 goto done_free_mem;
2103 }
2104 break;
2105
2106 case MPI_FUNCTION_SCSI_TASK_MGMT:
2107 {
2108 SCSITaskMgmt_t *pScsiTm;
2109 pScsiTm = (SCSITaskMgmt_t *)mf;
2110 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2111 "\tTaskType=0x%x MsgFlags=0x%x "
2112 "TaskMsgContext=0x%x id=%d channel=%d\n",
2113 ioc->name, pScsiTm->TaskType, le32_to_cpu
2114 (pScsiTm->TaskMsgContext), pScsiTm->MsgFlags,
2115 pScsiTm->TargetID, pScsiTm->Bus));
2116 break;
2117 }
2118
2119 case MPI_FUNCTION_IOC_INIT:
2120 {
2121 IOCInit_t *pInit = (IOCInit_t *) mf;
2122 u32 high_addr, sense_high;
2123
2124 /* Verify that all entries in the IOC INIT match
2125 * existing setup (and in LE format).
2126 */
2127 if (sizeof(dma_addr_t) == sizeof(u64)) {
2128 high_addr = cpu_to_le32((u32)((u64)ioc->req_frames_dma >> 32));
2129 sense_high= cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
2130 } else {
2131 high_addr = 0;
2132 sense_high= 0;
2133 }
2134
2135 if ((pInit->Flags != 0) || (pInit->MaxDevices != ioc->facts.MaxDevices) ||
2136 (pInit->MaxBuses != ioc->facts.MaxBuses) ||
2137 (pInit->ReplyFrameSize != cpu_to_le16(ioc->reply_sz)) ||
2138 (pInit->HostMfaHighAddr != high_addr) ||
2139 (pInit->SenseBufferHighAddr != sense_high)) {
2140 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2141 "IOC_INIT issued with 1 or more incorrect parameters. Rejected.\n",
2142 ioc->name, __FILE__, __LINE__);
2143 rc = -EFAULT;
2144 goto done_free_mem;
2145 }
2146 }
2147 break;
2148 default:
2149 /*
2150 * MPI_FUNCTION_PORT_ENABLE
2151 * MPI_FUNCTION_TARGET_CMD_BUFFER_POST
2152 * MPI_FUNCTION_TARGET_ASSIST
2153 * MPI_FUNCTION_TARGET_STATUS_SEND
2154 * MPI_FUNCTION_TARGET_MODE_ABORT
2155 * MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET
2156 * MPI_FUNCTION_IO_UNIT_RESET
2157 * MPI_FUNCTION_HANDSHAKE
2158 * MPI_FUNCTION_REPLY_FRAME_REMOVAL
2159 * MPI_FUNCTION_EVENT_NOTIFICATION
2160 * (driver handles event notification)
2161 * MPI_FUNCTION_EVENT_ACK
2162 */
2163
2164 /* What to do with these??? CHECK ME!!!
2165 MPI_FUNCTION_FC_LINK_SRVC_BUF_POST
2166 MPI_FUNCTION_FC_LINK_SRVC_RSP
2167 MPI_FUNCTION_FC_ABORT
2168 MPI_FUNCTION_LAN_SEND
2169 MPI_FUNCTION_LAN_RECEIVE
2170 MPI_FUNCTION_LAN_RESET
2171 */
2172
2173 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2174 "Illegal request (function 0x%x) \n",
2175 ioc->name, __FILE__, __LINE__, hdr->Function);
2176 rc = -EFAULT;
2177 goto done_free_mem;
2178 }
2179
2180 /* Add the SGL ( at most one data in SGE and one data out SGE )
2181 * In the case of two SGE's - the data out (write) will always
2182 * preceede the data in (read) SGE. psgList is used to free the
2183 * allocated memory.
2184 */
2185 psge = (char *) (((int *) mf) + karg.dataSgeOffset);
2186 flagsLength = 0;
2187
2188 if (karg.dataOutSize > 0)
2189 sgSize ++;
2190
2191 if (karg.dataInSize > 0)
2192 sgSize ++;
2193
2194 if (sgSize > 0) {
2195
2196 /* Set up the dataOut memory allocation */
2197 if (karg.dataOutSize > 0) {
2198 if (karg.dataInSize > 0) {
2199 flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT |
2200 MPI_SGE_FLAGS_END_OF_BUFFER |
2201 MPI_SGE_FLAGS_DIRECTION)
2202 << MPI_SGE_FLAGS_SHIFT;
2203 } else {
2204 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
2205 }
2206 flagsLength |= karg.dataOutSize;
2207 bufOut.len = karg.dataOutSize;
2208 bufOut.kptr = pci_alloc_consistent(
2209 ioc->pcidev, bufOut.len, &dma_addr_out);
2210
2211 if (bufOut.kptr == NULL) {
2212 rc = -ENOMEM;
2213 goto done_free_mem;
2214 } else {
2215 /* Set up this SGE.
2216 * Copy to MF and to sglbuf
2217 */
2218 ioc->add_sge(psge, flagsLength, dma_addr_out);
2219 psge += ioc->SGE_size;
2220
2221 /* Copy user data to kernel space.
2222 */
2223 if (copy_from_user(bufOut.kptr,
2224 karg.dataOutBufPtr,
2225 bufOut.len)) {
2226 printk(MYIOC_s_ERR_FMT
2227 "%s@%d::mptctl_do_mpt_command - Unable "
2228 "to read user data "
2229 "struct @ %p\n",
2230 ioc->name, __FILE__, __LINE__,karg.dataOutBufPtr);
2231 rc = -EFAULT;
2232 goto done_free_mem;
2233 }
2234 }
2235 }
2236
2237 if (karg.dataInSize > 0) {
2238 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
2239 flagsLength |= karg.dataInSize;
2240
2241 bufIn.len = karg.dataInSize;
2242 bufIn.kptr = pci_alloc_consistent(ioc->pcidev,
2243 bufIn.len, &dma_addr_in);
2244
2245 if (bufIn.kptr == NULL) {
2246 rc = -ENOMEM;
2247 goto done_free_mem;
2248 } else {
2249 /* Set up this SGE
2250 * Copy to MF and to sglbuf
2251 */
2252 ioc->add_sge(psge, flagsLength, dma_addr_in);
2253 }
2254 }
2255 } else {
2256 /* Add a NULL SGE
2257 */
2258 ioc->add_sge(psge, flagsLength, (dma_addr_t) -1);
2259 }
2260
2261 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, hdr->MsgContext);
2262 INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
2263 if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
2264
2265 mutex_lock(&ioc->taskmgmt_cmds.mutex);
2266 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
2267 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2268 goto done_free_mem;
2269 }
2270
2271 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
2272
2273 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
2274 (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
2275 mpt_put_msg_frame_hi_pri(mptctl_id, ioc, mf);
2276 else {
2277 rc =mpt_send_handshake_request(mptctl_id, ioc,
2278 sizeof(SCSITaskMgmt_t), (u32*)mf, CAN_SLEEP);
2279 if (rc != 0) {
2280 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2281 "send_handshake FAILED! (ioc %p, mf %p)\n",
2282 ioc->name, ioc, mf));
2283 mpt_clear_taskmgmt_in_progress_flag(ioc);
2284 rc = -ENODATA;
2285 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2286 goto done_free_mem;
2287 }
2288 }
2289
2290 } else
2291 mpt_put_msg_frame(mptctl_id, ioc, mf);
2292
2293 /* Now wait for the command to complete */
2294 timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT;
2295retry_wait:
2296 timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
2297 HZ*timeout);
2298 if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
2299 rc = -ETIME;
2300 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n",
2301 ioc->name, __func__));
2302 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
2303 if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
2304 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2305 goto done_free_mem;
2306 }
2307 if (!timeleft) {
2308 printk(MYIOC_s_WARN_FMT
2309 "mpt cmd timeout, doorbell=0x%08x"
2310 " function=0x%x\n",
2311 ioc->name, mpt_GetIocState(ioc, 0), function);
2312 if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
2313 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2314 mptctl_timeout_expired(ioc, mf);
2315 mf = NULL;
2316 } else
2317 goto retry_wait;
2318 goto done_free_mem;
2319 }
2320
2321 if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
2322 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2323
2324
2325 mf = NULL;
2326
2327 /* If a valid reply frame, copy to the user.
2328 * Offset 2: reply length in U32's
2329 */
2330 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) {
2331 if (karg.maxReplyBytes < ioc->reply_sz) {
2332 sz = min(karg.maxReplyBytes,
2333 4*ioc->ioctl_cmds.reply[2]);
2334 } else {
2335 sz = min(ioc->reply_sz, 4*ioc->ioctl_cmds.reply[2]);
2336 }
2337 if (sz > 0) {
2338 if (copy_to_user(karg.replyFrameBufPtr,
2339 ioc->ioctl_cmds.reply, sz)){
2340 printk(MYIOC_s_ERR_FMT
2341 "%s@%d::mptctl_do_mpt_command - "
2342 "Unable to write out reply frame %p\n",
2343 ioc->name, __FILE__, __LINE__, karg.replyFrameBufPtr);
2344 rc = -ENODATA;
2345 goto done_free_mem;
2346 }
2347 }
2348 }
2349
2350 /* If valid sense data, copy to user.
2351 */
2352 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_SENSE_VALID) {
2353 sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE);
2354 if (sz > 0) {
2355 if (copy_to_user(karg.senseDataPtr,
2356 ioc->ioctl_cmds.sense, sz)) {
2357 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2358 "Unable to write sense data to user %p\n",
2359 ioc->name, __FILE__, __LINE__,
2360 karg.senseDataPtr);
2361 rc = -ENODATA;
2362 goto done_free_mem;
2363 }
2364 }
2365 }
2366
2367 /* If the overall status is _GOOD and data in, copy data
2368 * to user.
2369 */
2370 if ((ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD) &&
2371 (karg.dataInSize > 0) && (bufIn.kptr)) {
2372
2373 if (copy_to_user(karg.dataInBufPtr,
2374 bufIn.kptr, karg.dataInSize)) {
2375 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2376 "Unable to write data to user %p\n",
2377 ioc->name, __FILE__, __LINE__,
2378 karg.dataInBufPtr);
2379 rc = -ENODATA;
2380 }
2381 }
2382
2383done_free_mem:
2384
2385 CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
2386 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
2387
2388 /* Free the allocated memory.
2389 */
2390 if (bufOut.kptr != NULL) {
2391 pci_free_consistent(ioc->pcidev,
2392 bufOut.len, (void *) bufOut.kptr, dma_addr_out);
2393 }
2394
2395 if (bufIn.kptr != NULL) {
2396 pci_free_consistent(ioc->pcidev,
2397 bufIn.len, (void *) bufIn.kptr, dma_addr_in);
2398 }
2399
2400 /* mf is null if command issued successfully
2401 * otherwise, failure occurred after mf acquired.
2402 */
2403 if (mf)
2404 mpt_free_msg_frame(ioc, mf);
2405
2406 return rc;
2407}
2408
2409/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2410/* Prototype Routine for the HOST INFO command.
2411 *
2412 * Outputs: None.
2413 * Return: 0 if successful
2414 * -EFAULT if data unavailable
2415 * -EBUSY if previous command timeout and IOC reset is not complete.
2416 * -ENODEV if no such device/adapter
2417 * -ETIME if timer expires
2418 * -ENOMEM if memory allocation error
2419 */
2420static int
2421mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
2422{
2423 hp_host_info_t __user *uarg = (void __user *) arg;
2424 MPT_ADAPTER *ioc;
2425 struct pci_dev *pdev;
2426 char *pbuf=NULL;
2427 dma_addr_t buf_dma;
2428 hp_host_info_t karg;
2429 CONFIGPARMS cfg;
2430 ConfigPageHeader_t hdr;
2431 int iocnum;
2432 int rc, cim_rev;
2433 ToolboxIstwiReadWriteRequest_t *IstwiRWRequest;
2434 MPT_FRAME_HDR *mf = NULL;
2435 unsigned long timeleft;
2436 int retval;
2437 u32 msgcontext;
2438
2439 /* Reset long to int. Should affect IA64 and SPARC only
2440 */
2441 if (data_size == sizeof(hp_host_info_t))
2442 cim_rev = 1;
2443 else if (data_size == sizeof(hp_host_info_rev0_t))
2444 cim_rev = 0; /* obsolete */
2445 else
2446 return -EFAULT;
2447
2448 if (copy_from_user(&karg, uarg, sizeof(hp_host_info_t))) {
2449 printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_host_info - "
2450 "Unable to read in hp_host_info struct @ %p\n",
2451 __FILE__, __LINE__, uarg);
2452 return -EFAULT;
2453 }
2454
2455 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
2456 (ioc == NULL)) {
2457 printk(KERN_DEBUG MYNAM "%s::mptctl_hp_hostinfo() @%d - ioc%d not found!\n",
2458 __FILE__, __LINE__, iocnum);
2459 return -ENODEV;
2460 }
2461 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": mptctl_hp_hostinfo called.\n",
2462 ioc->name));
2463
2464 /* Fill in the data and return the structure to the calling
2465 * program
2466 */
2467 pdev = (struct pci_dev *) ioc->pcidev;
2468
2469 karg.vendor = pdev->vendor;
2470 karg.device = pdev->device;
2471 karg.subsystem_id = pdev->subsystem_device;
2472 karg.subsystem_vendor = pdev->subsystem_vendor;
2473 karg.devfn = pdev->devfn;
2474 karg.bus = pdev->bus->number;
2475
2476 /* Save the SCSI host no. if
2477 * SCSI driver loaded
2478 */
2479 if (ioc->sh != NULL)
2480 karg.host_no = ioc->sh->host_no;
2481 else
2482 karg.host_no = -1;
2483
2484 /* Reformat the fw_version into a string
2485 */
2486 karg.fw_version[0] = ioc->facts.FWVersion.Struct.Major >= 10 ?
2487 ((ioc->facts.FWVersion.Struct.Major / 10) + '0') : '0';
2488 karg.fw_version[1] = (ioc->facts.FWVersion.Struct.Major % 10 ) + '0';
2489 karg.fw_version[2] = '.';
2490 karg.fw_version[3] = ioc->facts.FWVersion.Struct.Minor >= 10 ?
2491 ((ioc->facts.FWVersion.Struct.Minor / 10) + '0') : '0';
2492 karg.fw_version[4] = (ioc->facts.FWVersion.Struct.Minor % 10 ) + '0';
2493 karg.fw_version[5] = '.';
2494 karg.fw_version[6] = ioc->facts.FWVersion.Struct.Unit >= 10 ?
2495 ((ioc->facts.FWVersion.Struct.Unit / 10) + '0') : '0';
2496 karg.fw_version[7] = (ioc->facts.FWVersion.Struct.Unit % 10 ) + '0';
2497 karg.fw_version[8] = '.';
2498 karg.fw_version[9] = ioc->facts.FWVersion.Struct.Dev >= 10 ?
2499 ((ioc->facts.FWVersion.Struct.Dev / 10) + '0') : '0';
2500 karg.fw_version[10] = (ioc->facts.FWVersion.Struct.Dev % 10 ) + '0';
2501 karg.fw_version[11] = '\0';
2502
2503 /* Issue a config request to get the device serial number
2504 */
2505 hdr.PageVersion = 0;
2506 hdr.PageLength = 0;
2507 hdr.PageNumber = 0;
2508 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
2509 cfg.cfghdr.hdr = &hdr;
2510 cfg.physAddr = -1;
2511 cfg.pageAddr = 0;
2512 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
2513 cfg.dir = 0; /* read */
2514 cfg.timeout = 10;
2515
2516 strncpy(karg.serial_number, " ", 24);
2517 if (mpt_config(ioc, &cfg) == 0) {
2518 if (cfg.cfghdr.hdr->PageLength > 0) {
2519 /* Issue the second config page request */
2520 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
2521
2522 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
2523 if (pbuf) {
2524 cfg.physAddr = buf_dma;
2525 if (mpt_config(ioc, &cfg) == 0) {
2526 ManufacturingPage0_t *pdata = (ManufacturingPage0_t *) pbuf;
2527 if (strlen(pdata->BoardTracerNumber) > 1) {
2528 strncpy(karg.serial_number, pdata->BoardTracerNumber, 24);
2529 karg.serial_number[24-1]='\0';
2530 }
2531 }
2532 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
2533 pbuf = NULL;
2534 }
2535 }
2536 }
2537 rc = mpt_GetIocState(ioc, 1);
2538 switch (rc) {
2539 case MPI_IOC_STATE_OPERATIONAL:
2540 karg.ioc_status = HP_STATUS_OK;
2541 break;
2542
2543 case MPI_IOC_STATE_FAULT:
2544 karg.ioc_status = HP_STATUS_FAILED;
2545 break;
2546
2547 case MPI_IOC_STATE_RESET:
2548 case MPI_IOC_STATE_READY:
2549 default:
2550 karg.ioc_status = HP_STATUS_OTHER;
2551 break;
2552 }
2553
2554 karg.base_io_addr = pci_resource_start(pdev, 0);
2555
2556 if ((ioc->bus_type == SAS) || (ioc->bus_type == FC))
2557 karg.bus_phys_width = HP_BUS_WIDTH_UNK;
2558 else
2559 karg.bus_phys_width = HP_BUS_WIDTH_16;
2560
2561 karg.hard_resets = 0;
2562 karg.soft_resets = 0;
2563 karg.timeouts = 0;
2564 if (ioc->sh != NULL) {
2565 MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
2566
2567 if (hd && (cim_rev == 1)) {
2568 karg.hard_resets = ioc->hard_resets;
2569 karg.soft_resets = ioc->soft_resets;
2570 karg.timeouts = ioc->timeouts;
2571 }
2572 }
2573
2574 /*
2575 * Gather ISTWI(Industry Standard Two Wire Interface) Data
2576 */
2577 if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
2578 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
2579 "%s, no msg frames!!\n", ioc->name, __func__));
2580 goto out;
2581 }
2582
2583 IstwiRWRequest = (ToolboxIstwiReadWriteRequest_t *)mf;
2584 msgcontext = IstwiRWRequest->MsgContext;
2585 memset(IstwiRWRequest,0,sizeof(ToolboxIstwiReadWriteRequest_t));
2586 IstwiRWRequest->MsgContext = msgcontext;
2587 IstwiRWRequest->Function = MPI_FUNCTION_TOOLBOX;
2588 IstwiRWRequest->Tool = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL;
2589 IstwiRWRequest->Flags = MPI_TB_ISTWI_FLAGS_READ;
2590 IstwiRWRequest->NumAddressBytes = 0x01;
2591 IstwiRWRequest->DataLength = cpu_to_le16(0x04);
2592 if (pdev->devfn & 1)
2593 IstwiRWRequest->DeviceAddr = 0xB2;
2594 else
2595 IstwiRWRequest->DeviceAddr = 0xB0;
2596
2597 pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
2598 if (!pbuf)
2599 goto out;
2600 ioc->add_sge((char *)&IstwiRWRequest->SGL,
2601 (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma);
2602
2603 retval = 0;
2604 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context,
2605 IstwiRWRequest->MsgContext);
2606 INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
2607 mpt_put_msg_frame(mptctl_id, ioc, mf);
2608
2609retry_wait:
2610 timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
2611 HZ*MPT_IOCTL_DEFAULT_TIMEOUT);
2612 if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
2613 retval = -ETIME;
2614 printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__);
2615 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
2616 mpt_free_msg_frame(ioc, mf);
2617 goto out;
2618 }
2619 if (!timeleft) {
2620 printk(MYIOC_s_WARN_FMT
2621 "HOST INFO command timeout, doorbell=0x%08x\n",
2622 ioc->name, mpt_GetIocState(ioc, 0));
2623 mptctl_timeout_expired(ioc, mf);
2624 } else
2625 goto retry_wait;
2626 goto out;
2627 }
2628
2629 /*
2630 *ISTWI Data Definition
2631 * pbuf[0] = FW_VERSION = 0x4
2632 * pbuf[1] = Bay Count = 6 or 4 or 2, depending on
2633 * the config, you should be seeing one out of these three values
2634 * pbuf[2] = Drive Installed Map = bit pattern depend on which
2635 * bays have drives in them
2636 * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3)
2637 */
2638 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)
2639 karg.rsvd = *(u32 *)pbuf;
2640
2641 out:
2642 CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
2643 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
2644
2645 if (pbuf)
2646 pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
2647
2648 /* Copy the data from kernel memory to user memory
2649 */
2650 if (copy_to_user((char __user *)arg, &karg, sizeof(hp_host_info_t))) {
2651 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hpgethostinfo - "
2652 "Unable to write out hp_host_info @ %p\n",
2653 ioc->name, __FILE__, __LINE__, uarg);
2654 return -EFAULT;
2655 }
2656
2657 return 0;
2658
2659}
2660
2661/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2662/* Prototype Routine for the TARGET INFO command.
2663 *
2664 * Outputs: None.
2665 * Return: 0 if successful
2666 * -EFAULT if data unavailable
2667 * -EBUSY if previous command timeout and IOC reset is not complete.
2668 * -ENODEV if no such device/adapter
2669 * -ETIME if timer expires
2670 * -ENOMEM if memory allocation error
2671 */
2672static int
2673mptctl_hp_targetinfo(unsigned long arg)
2674{
2675 hp_target_info_t __user *uarg = (void __user *) arg;
2676 SCSIDevicePage0_t *pg0_alloc;
2677 SCSIDevicePage3_t *pg3_alloc;
2678 MPT_ADAPTER *ioc;
2679 MPT_SCSI_HOST *hd = NULL;
2680 hp_target_info_t karg;
2681 int iocnum;
2682 int data_sz;
2683 dma_addr_t page_dma;
2684 CONFIGPARMS cfg;
2685 ConfigPageHeader_t hdr;
2686 int tmp, np, rc = 0;
2687
2688 if (copy_from_user(&karg, uarg, sizeof(hp_target_info_t))) {
2689 printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_targetinfo - "
2690 "Unable to read in hp_host_targetinfo struct @ %p\n",
2691 __FILE__, __LINE__, uarg);
2692 return -EFAULT;
2693 }
2694
2695 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) ||
2696 (ioc == NULL)) {
2697 printk(KERN_DEBUG MYNAM "%s::mptctl_hp_targetinfo() @%d - ioc%d not found!\n",
2698 __FILE__, __LINE__, iocnum);
2699 return -ENODEV;
2700 }
2701 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n",
2702 ioc->name));
2703
2704 /* There is nothing to do for FCP parts.
2705 */
2706 if ((ioc->bus_type == SAS) || (ioc->bus_type == FC))
2707 return 0;
2708
2709 if ((ioc->spi_data.sdp0length == 0) || (ioc->sh == NULL))
2710 return 0;
2711
2712 if (ioc->sh->host_no != karg.hdr.host)
2713 return -ENODEV;
2714
2715 /* Get the data transfer speeds
2716 */
2717 data_sz = ioc->spi_data.sdp0length * 4;
2718 pg0_alloc = (SCSIDevicePage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
2719 if (pg0_alloc) {
2720 hdr.PageVersion = ioc->spi_data.sdp0version;
2721 hdr.PageLength = data_sz;
2722 hdr.PageNumber = 0;
2723 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
2724
2725 cfg.cfghdr.hdr = &hdr;
2726 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
2727 cfg.dir = 0;
2728 cfg.timeout = 0;
2729 cfg.physAddr = page_dma;
2730
2731 cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id;
2732
2733 if ((rc = mpt_config(ioc, &cfg)) == 0) {
2734 np = le32_to_cpu(pg0_alloc->NegotiatedParameters);
2735 karg.negotiated_width = np & MPI_SCSIDEVPAGE0_NP_WIDE ?
2736 HP_BUS_WIDTH_16 : HP_BUS_WIDTH_8;
2737
2738 if (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) {
2739 tmp = (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
2740 if (tmp < 0x09)
2741 karg.negotiated_speed = HP_DEV_SPEED_ULTRA320;
2742 else if (tmp <= 0x09)
2743 karg.negotiated_speed = HP_DEV_SPEED_ULTRA160;
2744 else if (tmp <= 0x0A)
2745 karg.negotiated_speed = HP_DEV_SPEED_ULTRA2;
2746 else if (tmp <= 0x0C)
2747 karg.negotiated_speed = HP_DEV_SPEED_ULTRA;
2748 else if (tmp <= 0x25)
2749 karg.negotiated_speed = HP_DEV_SPEED_FAST;
2750 else
2751 karg.negotiated_speed = HP_DEV_SPEED_ASYNC;
2752 } else
2753 karg.negotiated_speed = HP_DEV_SPEED_ASYNC;
2754 }
2755
2756 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg0_alloc, page_dma);
2757 }
2758
2759 /* Set defaults
2760 */
2761 karg.message_rejects = -1;
2762 karg.phase_errors = -1;
2763 karg.parity_errors = -1;
2764 karg.select_timeouts = -1;
2765
2766 /* Get the target error parameters
2767 */
2768 hdr.PageVersion = 0;
2769 hdr.PageLength = 0;
2770 hdr.PageNumber = 3;
2771 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
2772
2773 cfg.cfghdr.hdr = &hdr;
2774 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
2775 cfg.dir = 0;
2776 cfg.timeout = 0;
2777 cfg.physAddr = -1;
2778 if ((mpt_config(ioc, &cfg) == 0) && (cfg.cfghdr.hdr->PageLength > 0)) {
2779 /* Issue the second config page request */
2780 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
2781 data_sz = (int) cfg.cfghdr.hdr->PageLength * 4;
2782 pg3_alloc = (SCSIDevicePage3_t *) pci_alloc_consistent(
2783 ioc->pcidev, data_sz, &page_dma);
2784 if (pg3_alloc) {
2785 cfg.physAddr = page_dma;
2786 cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id;
2787 if ((rc = mpt_config(ioc, &cfg)) == 0) {
2788 karg.message_rejects = (u32) le16_to_cpu(pg3_alloc->MsgRejectCount);
2789 karg.phase_errors = (u32) le16_to_cpu(pg3_alloc->PhaseErrorCount);
2790 karg.parity_errors = (u32) le16_to_cpu(pg3_alloc->ParityErrorCount);
2791 }
2792 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg3_alloc, page_dma);
2793 }
2794 }
2795 hd = shost_priv(ioc->sh);
2796 if (hd != NULL)
2797 karg.select_timeouts = hd->sel_timeout[karg.hdr.id];
2798
2799 /* Copy the data from kernel memory to user memory
2800 */
2801 if (copy_to_user((char __user *)arg, &karg, sizeof(hp_target_info_t))) {
2802 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hp_target_info - "
2803 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n",
2804 ioc->name, __FILE__, __LINE__, uarg);
2805 return -EFAULT;
2806 }
2807
2808 return 0;
2809}
2810
2811/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2812
2813static const struct file_operations mptctl_fops = {
2814 .owner = THIS_MODULE,
2815 .llseek = no_llseek,
2816 .fasync = mptctl_fasync,
2817 .unlocked_ioctl = mptctl_ioctl,
2818#ifdef CONFIG_COMPAT
2819 .compat_ioctl = compat_mpctl_ioctl,
2820#endif
2821};
2822
2823static struct miscdevice mptctl_miscdev = {
2824 MPT_MINOR,
2825 MYNAM,
2826 &mptctl_fops
2827};
2828
2829/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2830
2831#ifdef CONFIG_COMPAT
2832
2833static int
2834compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd,
2835 unsigned long arg)
2836{
2837 struct mpt_fw_xfer32 kfw32;
2838 struct mpt_fw_xfer kfw;
2839 MPT_ADAPTER *iocp = NULL;
2840 int iocnum, iocnumX;
2841 int nonblock = (filp->f_flags & O_NONBLOCK);
2842 int ret;
2843
2844
2845 if (copy_from_user(&kfw32, (char __user *)arg, sizeof(kfw32)))
2846 return -EFAULT;
2847
2848 /* Verify intended MPT adapter */
2849 iocnumX = kfw32.iocnum & 0xFF;
2850 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
2851 (iocp == NULL)) {
2852 printk(KERN_DEBUG MYNAM "::compat_mptfwxfer_ioctl @%d - ioc%d not found!\n",
2853 __LINE__, iocnumX);
2854 return -ENODEV;
2855 }
2856
2857 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
2858 return ret;
2859
2860 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mptfwxfer_ioctl() called\n",
2861 iocp->name));
2862 kfw.iocnum = iocnum;
2863 kfw.fwlen = kfw32.fwlen;
2864 kfw.bufp = compat_ptr(kfw32.bufp);
2865
2866 ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen);
2867
2868 mutex_unlock(&iocp->ioctl_cmds.mutex);
2869
2870 return ret;
2871}
2872
2873static int
2874compat_mpt_command(struct file *filp, unsigned int cmd,
2875 unsigned long arg)
2876{
2877 struct mpt_ioctl_command32 karg32;
2878 struct mpt_ioctl_command32 __user *uarg = (struct mpt_ioctl_command32 __user *) arg;
2879 struct mpt_ioctl_command karg;
2880 MPT_ADAPTER *iocp = NULL;
2881 int iocnum, iocnumX;
2882 int nonblock = (filp->f_flags & O_NONBLOCK);
2883 int ret;
2884
2885 if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32)))
2886 return -EFAULT;
2887
2888 /* Verify intended MPT adapter */
2889 iocnumX = karg32.hdr.iocnum & 0xFF;
2890 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
2891 (iocp == NULL)) {
2892 printk(KERN_DEBUG MYNAM "::compat_mpt_command @%d - ioc%d not found!\n",
2893 __LINE__, iocnumX);
2894 return -ENODEV;
2895 }
2896
2897 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
2898 return ret;
2899
2900 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mpt_command() called\n",
2901 iocp->name));
2902 /* Copy data to karg */
2903 karg.hdr.iocnum = karg32.hdr.iocnum;
2904 karg.hdr.port = karg32.hdr.port;
2905 karg.timeout = karg32.timeout;
2906 karg.maxReplyBytes = karg32.maxReplyBytes;
2907
2908 karg.dataInSize = karg32.dataInSize;
2909 karg.dataOutSize = karg32.dataOutSize;
2910 karg.maxSenseBytes = karg32.maxSenseBytes;
2911 karg.dataSgeOffset = karg32.dataSgeOffset;
2912
2913 karg.replyFrameBufPtr = (char __user *)(unsigned long)karg32.replyFrameBufPtr;
2914 karg.dataInBufPtr = (char __user *)(unsigned long)karg32.dataInBufPtr;
2915 karg.dataOutBufPtr = (char __user *)(unsigned long)karg32.dataOutBufPtr;
2916 karg.senseDataPtr = (char __user *)(unsigned long)karg32.senseDataPtr;
2917
2918 /* Pass new structure to do_mpt_command
2919 */
2920 ret = mptctl_do_mpt_command (karg, &uarg->MF);
2921
2922 mutex_unlock(&iocp->ioctl_cmds.mutex);
2923
2924 return ret;
2925}
2926
2927static long compat_mpctl_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
2928{
2929 long ret;
2930 mutex_lock(&mpctl_mutex);
2931 switch (cmd) {
2932 case MPTIOCINFO:
2933 case MPTIOCINFO1:
2934 case MPTIOCINFO2:
2935 case MPTTARGETINFO:
2936 case MPTEVENTQUERY:
2937 case MPTEVENTENABLE:
2938 case MPTEVENTREPORT:
2939 case MPTHARDRESET:
2940 case HP_GETHOSTINFO:
2941 case HP_GETTARGETINFO:
2942 case MPTTEST:
2943 ret = __mptctl_ioctl(f, cmd, arg);
2944 break;
2945 case MPTCOMMAND32:
2946 ret = compat_mpt_command(f, cmd, arg);
2947 break;
2948 case MPTFWDOWNLOAD32:
2949 ret = compat_mptfwxfer_ioctl(f, cmd, arg);
2950 break;
2951 default:
2952 ret = -ENOIOCTLCMD;
2953 break;
2954 }
2955 mutex_unlock(&mpctl_mutex);
2956 return ret;
2957}
2958
2959#endif
2960
2961
2962/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2963/*
2964 * mptctl_probe - Installs ioctl devices per bus.
2965 * @pdev: Pointer to pci_dev structure
2966 *
2967 * Returns 0 for success, non-zero for failure.
2968 *
2969 */
2970
2971static int
2972mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
2973{
2974 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2975
2976 mutex_init(&ioc->ioctl_cmds.mutex);
2977 init_completion(&ioc->ioctl_cmds.done);
2978 return 0;
2979}
2980
2981/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2982/*
2983 * mptctl_remove - Removed ioctl devices
2984 * @pdev: Pointer to pci_dev structure
2985 *
2986 *
2987 */
2988static void
2989mptctl_remove(struct pci_dev *pdev)
2990{
2991}
2992
2993static struct mpt_pci_driver mptctl_driver = {
2994 .probe = mptctl_probe,
2995 .remove = mptctl_remove,
2996};
2997
2998/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2999static int __init mptctl_init(void)
3000{
3001 int err;
3002 int where = 1;
3003
3004 show_mptmod_ver(my_NAME, my_VERSION);
3005
3006 mpt_device_driver_register(&mptctl_driver, MPTCTL_DRIVER);
3007
3008 /* Register this device */
3009 err = misc_register(&mptctl_miscdev);
3010 if (err < 0) {
3011 printk(KERN_ERR MYNAM ": Can't register misc device [minor=%d].\n", MPT_MINOR);
3012 goto out_fail;
3013 }
3014 printk(KERN_INFO MYNAM ": Registered with Fusion MPT base driver\n");
3015 printk(KERN_INFO MYNAM ": /dev/%s @ (major,minor=%d,%d)\n",
3016 mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor);
3017
3018 /*
3019 * Install our handler
3020 */
3021 ++where;
3022 mptctl_id = mpt_register(mptctl_reply, MPTCTL_DRIVER,
3023 "mptctl_reply");
3024 if (!mptctl_id || mptctl_id >= MPT_MAX_PROTOCOL_DRIVERS) {
3025 printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n");
3026 misc_deregister(&mptctl_miscdev);
3027 err = -EBUSY;
3028 goto out_fail;
3029 }
3030
3031 mptctl_taskmgmt_id = mpt_register(mptctl_taskmgmt_reply, MPTCTL_DRIVER,
3032 "mptctl_taskmgmt_reply");
3033 if (!mptctl_taskmgmt_id || mptctl_taskmgmt_id >= MPT_MAX_PROTOCOL_DRIVERS) {
3034 printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n");
3035 mpt_deregister(mptctl_id);
3036 misc_deregister(&mptctl_miscdev);
3037 err = -EBUSY;
3038 goto out_fail;
3039 }
3040
3041 mpt_reset_register(mptctl_id, mptctl_ioc_reset);
3042 mpt_event_register(mptctl_id, mptctl_event_process);
3043
3044 return 0;
3045
3046out_fail:
3047
3048 mpt_device_driver_deregister(MPTCTL_DRIVER);
3049
3050 return err;
3051}
3052
3053/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3054static void mptctl_exit(void)
3055{
3056 misc_deregister(&mptctl_miscdev);
3057 printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n",
3058 mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor);
3059
3060 /* De-register event handler from base module */
3061 mpt_event_deregister(mptctl_id);
3062
3063 /* De-register reset handler from base module */
3064 mpt_reset_deregister(mptctl_id);
3065
3066 /* De-register callback handler from base module */
3067 mpt_deregister(mptctl_taskmgmt_id);
3068 mpt_deregister(mptctl_id);
3069
3070 mpt_device_driver_deregister(MPTCTL_DRIVER);
3071
3072}
3073
3074/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3075
3076module_init(mptctl_init);
3077module_exit(mptctl_exit);
1/*
2 * linux/drivers/message/fusion/mptctl.c
3 * mpt Ioctl driver.
4 * For use with LSI PCI chip/adapters
5 * running LSI Fusion MPT (Message Passing Technology) firmware.
6 *
7 * Copyright (c) 1999-2008 LSI Corporation
8 * (mailto:DL-MPTFusionLinux@lsi.com)
9 *
10 */
11/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
12/*
13 This program is free software; you can redistribute it and/or modify
14 it under the terms of the GNU General Public License as published by
15 the Free Software Foundation; version 2 of the License.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 NO WARRANTY
23 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
24 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
25 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
26 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
27 solely responsible for determining the appropriateness of using and
28 distributing the Program and assumes all risks associated with its
29 exercise of rights under this Agreement, including but not limited to
30 the risks and costs of program errors, damage to or loss of data,
31 programs or equipment, and unavailability or interruption of operations.
32
33 DISCLAIMER OF LIABILITY
34 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
35 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
37 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
38 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
39 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
40 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
41
42 You should have received a copy of the GNU General Public License
43 along with this program; if not, write to the Free Software
44 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
45*/
46/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
47
48#include <linux/kernel.h>
49#include <linux/module.h>
50#include <linux/errno.h>
51#include <linux/init.h>
52#include <linux/slab.h>
53#include <linux/types.h>
54#include <linux/pci.h>
55#include <linux/delay.h> /* for mdelay */
56#include <linux/miscdevice.h>
57#include <linux/mutex.h>
58#include <linux/compat.h>
59
60#include <asm/io.h>
61#include <linux/uaccess.h>
62
63#include <scsi/scsi.h>
64#include <scsi/scsi_cmnd.h>
65#include <scsi/scsi_device.h>
66#include <scsi/scsi_host.h>
67#include <scsi/scsi_tcq.h>
68
69#define COPYRIGHT "Copyright (c) 1999-2008 LSI Corporation"
70#define MODULEAUTHOR "LSI Corporation"
71#include "mptbase.h"
72#include "mptctl.h"
73
74/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
75#define my_NAME "Fusion MPT misc device (ioctl) driver"
76#define my_VERSION MPT_LINUX_VERSION_COMMON
77#define MYNAM "mptctl"
78
79MODULE_AUTHOR(MODULEAUTHOR);
80MODULE_DESCRIPTION(my_NAME);
81MODULE_LICENSE("GPL");
82MODULE_VERSION(my_VERSION);
83
84/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
85
86static DEFINE_MUTEX(mpctl_mutex);
87static u8 mptctl_id = MPT_MAX_PROTOCOL_DRIVERS;
88static u8 mptctl_taskmgmt_id = MPT_MAX_PROTOCOL_DRIVERS;
89
90static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait );
91
92/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
93
94struct buflist {
95 u8 *kptr;
96 int len;
97};
98
99/*
100 * Function prototypes. Called from OS entry point mptctl_ioctl.
101 * arg contents specific to function.
102 */
103static int mptctl_fw_download(MPT_ADAPTER *iocp, unsigned long arg);
104static int mptctl_getiocinfo(MPT_ADAPTER *iocp, unsigned long arg, unsigned int cmd);
105static int mptctl_gettargetinfo(MPT_ADAPTER *iocp, unsigned long arg);
106static int mptctl_readtest(MPT_ADAPTER *iocp, unsigned long arg);
107static int mptctl_mpt_command(MPT_ADAPTER *iocp, unsigned long arg);
108static int mptctl_eventquery(MPT_ADAPTER *iocp, unsigned long arg);
109static int mptctl_eventenable(MPT_ADAPTER *iocp, unsigned long arg);
110static int mptctl_eventreport(MPT_ADAPTER *iocp, unsigned long arg);
111static int mptctl_replace_fw(MPT_ADAPTER *iocp, unsigned long arg);
112
113static int mptctl_do_reset(MPT_ADAPTER *iocp, unsigned long arg);
114static int mptctl_hp_hostinfo(MPT_ADAPTER *iocp, unsigned long arg, unsigned int cmd);
115static int mptctl_hp_targetinfo(MPT_ADAPTER *iocp, unsigned long arg);
116
117static int mptctl_probe(struct pci_dev *, const struct pci_device_id *);
118static void mptctl_remove(struct pci_dev *);
119
120#ifdef CONFIG_COMPAT
121static long compat_mpctl_ioctl(struct file *f, unsigned cmd, unsigned long arg);
122#endif
123/*
124 * Private function calls.
125 */
126static int mptctl_do_mpt_command(MPT_ADAPTER *iocp, struct mpt_ioctl_command karg, void __user *mfPtr);
127static int mptctl_do_fw_download(MPT_ADAPTER *iocp, char __user *ufwbuf, size_t fwlen);
128static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags,
129 struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc);
130static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma,
131 struct buflist *buflist, MPT_ADAPTER *ioc);
132
133/*
134 * Reset Handler cleanup function
135 */
136static int mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase);
137
138/*
139 * Event Handler function
140 */
141static int mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
142static struct fasync_struct *async_queue=NULL;
143
144/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
145/*
146 * Scatter gather list (SGL) sizes and limits...
147 */
148//#define MAX_SCSI_FRAGS 9
149#define MAX_FRAGS_SPILL1 9
150#define MAX_FRAGS_SPILL2 15
151#define FRAGS_PER_BUCKET (MAX_FRAGS_SPILL2 + 1)
152
153//#define MAX_CHAIN_FRAGS 64
154//#define MAX_CHAIN_FRAGS (15+15+15+16)
155#define MAX_CHAIN_FRAGS (4 * MAX_FRAGS_SPILL2 + 1)
156
157// Define max sg LIST bytes ( == (#frags + #chains) * 8 bytes each)
158// Works out to: 592d bytes! (9+1)*8 + 4*(15+1)*8
159// ^----------------- 80 + 512
160#define MAX_SGL_BYTES ((MAX_FRAGS_SPILL1 + 1 + (4 * FRAGS_PER_BUCKET)) * 8)
161
162/* linux only seems to ever give 128kB MAX contiguous (GFP_USER) mem bytes */
163#define MAX_KMALLOC_SZ (128*1024)
164
165#define MPT_IOCTL_DEFAULT_TIMEOUT 10 /* Default timeout value (seconds) */
166
167/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
168/**
169 * mptctl_syscall_down - Down the MPT adapter syscall semaphore.
170 * @ioc: Pointer to MPT adapter
171 * @nonblock: boolean, non-zero if O_NONBLOCK is set
172 *
173 * All of the ioctl commands can potentially sleep, which is illegal
174 * with a spinlock held, thus we perform mutual exclusion here.
175 *
176 * Returns negative errno on error, or zero for success.
177 */
178static inline int
179mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock)
180{
181 int rc = 0;
182
183 if (nonblock) {
184 if (!mutex_trylock(&ioc->ioctl_cmds.mutex))
185 rc = -EAGAIN;
186 } else {
187 if (mutex_lock_interruptible(&ioc->ioctl_cmds.mutex))
188 rc = -ERESTARTSYS;
189 }
190 return rc;
191}
192
193/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
194/*
195 * This is the callback for any message we have posted. The message itself
196 * will be returned to the message pool when we return from the IRQ
197 *
198 * This runs in irq context so be short and sweet.
199 */
200static int
201mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
202{
203 char *sense_data;
204 int req_index;
205 int sz;
206
207 if (!req)
208 return 0;
209
210 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function "
211 "(0x%02X), req=%p, reply=%p\n", ioc->name, req->u.hdr.Function,
212 req, reply));
213
214 /*
215 * Handling continuation of the same reply. Processing the first
216 * reply, and eating the other replys that come later.
217 */
218 if (ioc->ioctl_cmds.msg_context != req->u.hdr.MsgContext)
219 goto out_continuation;
220
221 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
222
223 if (!reply)
224 goto out;
225
226 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
227 sz = min(ioc->reply_sz, 4*reply->u.reply.MsgLength);
228 memcpy(ioc->ioctl_cmds.reply, reply, sz);
229
230 if (reply->u.reply.IOCStatus || reply->u.reply.IOCLogInfo)
231 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
232 "iocstatus (0x%04X), loginfo (0x%08X)\n", ioc->name,
233 le16_to_cpu(reply->u.reply.IOCStatus),
234 le32_to_cpu(reply->u.reply.IOCLogInfo)));
235
236 if ((req->u.hdr.Function == MPI_FUNCTION_SCSI_IO_REQUEST) ||
237 (req->u.hdr.Function ==
238 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
239
240 if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
241 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
242 "scsi_status (0x%02x), scsi_state (0x%02x), "
243 "tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
244 reply->u.sreply.SCSIStatus,
245 reply->u.sreply.SCSIState,
246 le16_to_cpu(reply->u.sreply.TaskTag),
247 le32_to_cpu(reply->u.sreply.TransferCount)));
248
249 if (reply->u.sreply.SCSIState &
250 MPI_SCSI_STATE_AUTOSENSE_VALID) {
251 sz = req->u.scsireq.SenseBufferLength;
252 req_index =
253 le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
254 sense_data = ((u8 *)ioc->sense_buf_pool +
255 (req_index * MPT_SENSE_BUFFER_ALLOC));
256 memcpy(ioc->ioctl_cmds.sense, sense_data, sz);
257 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_SENSE_VALID;
258 }
259 }
260
261 out:
262 /* We are done, issue wake up
263 */
264 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
265 if (req->u.hdr.Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
266 mpt_clear_taskmgmt_in_progress_flag(ioc);
267 ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
268 complete(&ioc->ioctl_cmds.done);
269 if (ioc->bus_type == SAS)
270 ioc->schedule_target_reset(ioc);
271 } else {
272 ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
273 complete(&ioc->ioctl_cmds.done);
274 }
275 }
276
277 out_continuation:
278 if (reply && (reply->u.reply.MsgFlags &
279 MPI_MSGFLAGS_CONTINUATION_REPLY))
280 return 0;
281 return 1;
282}
283
284
285static int
286mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
287{
288 if (!mf)
289 return 0;
290
291 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
292 "TaskMgmt completed (mf=%p, mr=%p)\n",
293 ioc->name, mf, mr));
294
295 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
296
297 if (!mr)
298 goto out;
299
300 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
301 memcpy(ioc->taskmgmt_cmds.reply, mr,
302 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
303 out:
304 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
305 mpt_clear_taskmgmt_in_progress_flag(ioc);
306 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
307 complete(&ioc->taskmgmt_cmds.done);
308 if (ioc->bus_type == SAS)
309 ioc->schedule_target_reset(ioc);
310 return 1;
311 }
312 return 0;
313}
314
315static int
316mptctl_do_taskmgmt(MPT_ADAPTER *ioc, u8 tm_type, u8 bus_id, u8 target_id)
317{
318 MPT_FRAME_HDR *mf;
319 SCSITaskMgmt_t *pScsiTm;
320 SCSITaskMgmtReply_t *pScsiTmReply;
321 int ii;
322 int retval;
323 unsigned long timeout;
324 u16 iocstatus;
325
326
327 mutex_lock(&ioc->taskmgmt_cmds.mutex);
328 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
329 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
330 return -EPERM;
331 }
332
333 retval = 0;
334
335 mf = mpt_get_msg_frame(mptctl_taskmgmt_id, ioc);
336 if (mf == NULL) {
337 dtmprintk(ioc,
338 printk(MYIOC_s_WARN_FMT "TaskMgmt, no msg frames!!\n",
339 ioc->name));
340 mpt_clear_taskmgmt_in_progress_flag(ioc);
341 retval = -ENOMEM;
342 goto tm_done;
343 }
344
345 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
346 ioc->name, mf));
347
348 pScsiTm = (SCSITaskMgmt_t *) mf;
349 memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
350 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
351 pScsiTm->TaskType = tm_type;
352 if ((tm_type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) &&
353 (ioc->bus_type == FC))
354 pScsiTm->MsgFlags =
355 MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
356 pScsiTm->TargetID = target_id;
357 pScsiTm->Bus = bus_id;
358 pScsiTm->ChainOffset = 0;
359 pScsiTm->Reserved = 0;
360 pScsiTm->Reserved1 = 0;
361 pScsiTm->TaskMsgContext = 0;
362 for (ii= 0; ii < 8; ii++)
363 pScsiTm->LUN[ii] = 0;
364 for (ii=0; ii < 7; ii++)
365 pScsiTm->Reserved2[ii] = 0;
366
367 switch (ioc->bus_type) {
368 case FC:
369 timeout = 40;
370 break;
371 case SAS:
372 timeout = 30;
373 break;
374 case SPI:
375 default:
376 timeout = 10;
377 break;
378 }
379
380 dtmprintk(ioc,
381 printk(MYIOC_s_DEBUG_FMT "TaskMgmt type=%d timeout=%ld\n",
382 ioc->name, tm_type, timeout));
383
384 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
385 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
386 (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
387 mpt_put_msg_frame_hi_pri(mptctl_taskmgmt_id, ioc, mf);
388 else {
389 retval = mpt_send_handshake_request(mptctl_taskmgmt_id, ioc,
390 sizeof(SCSITaskMgmt_t), (u32 *)pScsiTm, CAN_SLEEP);
391 if (retval != 0) {
392 dfailprintk(ioc,
393 printk(MYIOC_s_ERR_FMT
394 "TaskMgmt send_handshake FAILED!"
395 " (ioc %p, mf %p, rc=%d) \n", ioc->name,
396 ioc, mf, retval));
397 mpt_free_msg_frame(ioc, mf);
398 mpt_clear_taskmgmt_in_progress_flag(ioc);
399 goto tm_done;
400 }
401 }
402
403 /* Now wait for the command to complete */
404 ii = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, timeout*HZ);
405
406 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
407 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
408 "TaskMgmt failed\n", ioc->name));
409 mpt_free_msg_frame(ioc, mf);
410 mpt_clear_taskmgmt_in_progress_flag(ioc);
411 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
412 retval = 0;
413 else
414 retval = -1; /* return failure */
415 goto tm_done;
416 }
417
418 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
419 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
420 "TaskMgmt failed\n", ioc->name));
421 retval = -1; /* return failure */
422 goto tm_done;
423 }
424
425 pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
426 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
427 "TaskMgmt fw_channel = %d, fw_id = %d, task_type=0x%02X, "
428 "iocstatus=0x%04X\n\tloginfo=0x%08X, response_code=0x%02X, "
429 "term_cmnds=%d\n", ioc->name, pScsiTmReply->Bus,
430 pScsiTmReply->TargetID, tm_type,
431 le16_to_cpu(pScsiTmReply->IOCStatus),
432 le32_to_cpu(pScsiTmReply->IOCLogInfo),
433 pScsiTmReply->ResponseCode,
434 le32_to_cpu(pScsiTmReply->TerminationCount)));
435
436 iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
437
438 if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
439 iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED ||
440 iocstatus == MPI_IOCSTATUS_SUCCESS)
441 retval = 0;
442 else {
443 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
444 "TaskMgmt failed\n", ioc->name));
445 retval = -1; /* return failure */
446 }
447
448 tm_done:
449 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
450 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
451 return retval;
452}
453
454/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
455/* mptctl_timeout_expired
456 *
457 * Expecting an interrupt, however timed out.
458 *
459 */
460static void
461mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
462{
463 unsigned long flags;
464 int ret_val = -1;
465 SCSIIORequest_t *scsi_req = (SCSIIORequest_t *) mf;
466 u8 function = mf->u.hdr.Function;
467
468 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n",
469 ioc->name, __func__));
470
471 if (mpt_fwfault_debug)
472 mpt_halt_firmware(ioc);
473
474 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
475 if (ioc->ioc_reset_in_progress) {
476 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
477 CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
478 mpt_free_msg_frame(ioc, mf);
479 return;
480 }
481 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
482
483
484 CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
485
486 if (ioc->bus_type == SAS) {
487 if (function == MPI_FUNCTION_SCSI_IO_REQUEST)
488 ret_val = mptctl_do_taskmgmt(ioc,
489 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
490 scsi_req->Bus, scsi_req->TargetID);
491 else if (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)
492 ret_val = mptctl_do_taskmgmt(ioc,
493 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
494 scsi_req->Bus, 0);
495 if (!ret_val)
496 return;
497 } else {
498 if ((function == MPI_FUNCTION_SCSI_IO_REQUEST) ||
499 (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH))
500 ret_val = mptctl_do_taskmgmt(ioc,
501 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
502 scsi_req->Bus, 0);
503 if (!ret_val)
504 return;
505 }
506
507 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling Reset! \n",
508 ioc->name));
509 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
510 mpt_free_msg_frame(ioc, mf);
511}
512
513
514/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
515/* mptctl_ioc_reset
516 *
517 * Clean-up functionality. Used only if there has been a
518 * reload of the FW due.
519 *
520 */
521static int
522mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
523{
524 switch(reset_phase) {
525 case MPT_IOC_SETUP_RESET:
526 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
527 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
528 break;
529 case MPT_IOC_PRE_RESET:
530 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
531 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
532 break;
533 case MPT_IOC_POST_RESET:
534 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
535 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
536 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
537 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_DID_IOCRESET;
538 complete(&ioc->ioctl_cmds.done);
539 }
540 break;
541 default:
542 break;
543 }
544
545 return 1;
546}
547
548/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
549/* ASYNC Event Notification Support */
550static int
551mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
552{
553 u8 event;
554
555 event = le32_to_cpu(pEvReply->Event) & 0xFF;
556
557 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s() called\n",
558 ioc->name, __func__));
559 if(async_queue == NULL)
560 return 1;
561
562 /* Raise SIGIO for persistent events.
563 * TODO - this define is not in MPI spec yet,
564 * but they plan to set it to 0x21
565 */
566 if (event == 0x21) {
567 ioc->aen_event_read_flag=1;
568 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Raised SIGIO to application\n",
569 ioc->name));
570 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
571 "Raised SIGIO to application\n", ioc->name));
572 kill_fasync(&async_queue, SIGIO, POLL_IN);
573 return 1;
574 }
575
576 /* This flag is set after SIGIO was raised, and
577 * remains set until the application has read
578 * the event log via ioctl=MPTEVENTREPORT
579 */
580 if(ioc->aen_event_read_flag)
581 return 1;
582
583 /* Signal only for the events that are
584 * requested for by the application
585 */
586 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
587 ioc->aen_event_read_flag=1;
588 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
589 "Raised SIGIO to application\n", ioc->name));
590 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
591 "Raised SIGIO to application\n", ioc->name));
592 kill_fasync(&async_queue, SIGIO, POLL_IN);
593 }
594 return 1;
595}
596
597static int
598mptctl_fasync(int fd, struct file *filep, int mode)
599{
600 MPT_ADAPTER *ioc;
601 int ret;
602
603 mutex_lock(&mpctl_mutex);
604 list_for_each_entry(ioc, &ioc_list, list)
605 ioc->aen_event_read_flag=0;
606
607 ret = fasync_helper(fd, filep, mode, &async_queue);
608 mutex_unlock(&mpctl_mutex);
609 return ret;
610}
611
612/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
613/*
614 * MPT ioctl handler
615 * cmd - specify the particular IOCTL command to be issued
616 * arg - data specific to the command. Must not be null.
617 */
618static long
619__mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
620{
621 mpt_ioctl_header __user *uhdr = (void __user *) arg;
622 mpt_ioctl_header khdr;
623 int iocnum;
624 unsigned iocnumX;
625 int nonblock = (file->f_flags & O_NONBLOCK);
626 int ret;
627 MPT_ADAPTER *iocp = NULL;
628
629 if (copy_from_user(&khdr, uhdr, sizeof(khdr))) {
630 printk(KERN_ERR MYNAM "%s::mptctl_ioctl() @%d - "
631 "Unable to copy mpt_ioctl_header data @ %p\n",
632 __FILE__, __LINE__, uhdr);
633 return -EFAULT;
634 }
635 ret = -ENXIO; /* (-6) No such device or address */
636
637 /* Verify intended MPT adapter - set iocnum and the adapter
638 * pointer (iocp)
639 */
640 iocnumX = khdr.iocnum & 0xFF;
641 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
642 (iocp == NULL))
643 return -ENODEV;
644
645 if (!iocp->active) {
646 printk(KERN_DEBUG MYNAM "%s::mptctl_ioctl() @%d - Controller disabled.\n",
647 __FILE__, __LINE__);
648 return -EFAULT;
649 }
650
651 /* Handle those commands that are just returning
652 * information stored in the driver.
653 * These commands should never time out and are unaffected
654 * by TM and FW reloads.
655 */
656 if ((cmd & ~IOCSIZE_MASK) == (MPTIOCINFO & ~IOCSIZE_MASK)) {
657 return mptctl_getiocinfo(iocp, arg, _IOC_SIZE(cmd));
658 } else if (cmd == MPTTARGETINFO) {
659 return mptctl_gettargetinfo(iocp, arg);
660 } else if (cmd == MPTTEST) {
661 return mptctl_readtest(iocp, arg);
662 } else if (cmd == MPTEVENTQUERY) {
663 return mptctl_eventquery(iocp, arg);
664 } else if (cmd == MPTEVENTENABLE) {
665 return mptctl_eventenable(iocp, arg);
666 } else if (cmd == MPTEVENTREPORT) {
667 return mptctl_eventreport(iocp, arg);
668 } else if (cmd == MPTFWREPLACE) {
669 return mptctl_replace_fw(iocp, arg);
670 }
671
672 /* All of these commands require an interrupt or
673 * are unknown/illegal.
674 */
675 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
676 return ret;
677
678 if (cmd == MPTFWDOWNLOAD)
679 ret = mptctl_fw_download(iocp, arg);
680 else if (cmd == MPTCOMMAND)
681 ret = mptctl_mpt_command(iocp, arg);
682 else if (cmd == MPTHARDRESET)
683 ret = mptctl_do_reset(iocp, arg);
684 else if ((cmd & ~IOCSIZE_MASK) == (HP_GETHOSTINFO & ~IOCSIZE_MASK))
685 ret = mptctl_hp_hostinfo(iocp, arg, _IOC_SIZE(cmd));
686 else if (cmd == HP_GETTARGETINFO)
687 ret = mptctl_hp_targetinfo(iocp, arg);
688 else
689 ret = -EINVAL;
690
691 mutex_unlock(&iocp->ioctl_cmds.mutex);
692
693 return ret;
694}
695
696static long
697mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
698{
699 long ret;
700 mutex_lock(&mpctl_mutex);
701 ret = __mptctl_ioctl(file, cmd, arg);
702 mutex_unlock(&mpctl_mutex);
703 return ret;
704}
705
706static int mptctl_do_reset(MPT_ADAPTER *iocp, unsigned long arg)
707{
708 struct mpt_ioctl_diag_reset __user *urinfo = (void __user *) arg;
709 struct mpt_ioctl_diag_reset krinfo;
710
711 if (copy_from_user(&krinfo, urinfo, sizeof(struct mpt_ioctl_diag_reset))) {
712 printk(KERN_ERR MYNAM "%s@%d::mptctl_do_reset - "
713 "Unable to copy mpt_ioctl_diag_reset struct @ %p\n",
714 __FILE__, __LINE__, urinfo);
715 return -EFAULT;
716 }
717
718 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_reset called.\n",
719 iocp->name));
720
721 if (mpt_HardResetHandler(iocp, CAN_SLEEP) != 0) {
722 printk (MYIOC_s_ERR_FMT "%s@%d::mptctl_do_reset - reset failed.\n",
723 iocp->name, __FILE__, __LINE__);
724 return -1;
725 }
726
727 return 0;
728}
729
730/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
731/*
732 * MPT FW download function. Cast the arg into the mpt_fw_xfer structure.
733 * This structure contains: iocnum, firmware length (bytes),
734 * pointer to user space memory where the fw image is stored.
735 *
736 * Outputs: None.
737 * Return: 0 if successful
738 * -EFAULT if data unavailable
739 * -ENXIO if no such device
740 * -EAGAIN if resource problem
741 * -ENOMEM if no memory for SGE
742 * -EMLINK if too many chain buffers required
743 * -EBADRQC if adapter does not support FW download
744 * -EBUSY if adapter is busy
745 * -ENOMSG if FW upload returned bad status
746 */
747static int
748mptctl_fw_download(MPT_ADAPTER *iocp, unsigned long arg)
749{
750 struct mpt_fw_xfer __user *ufwdl = (void __user *) arg;
751 struct mpt_fw_xfer kfwdl;
752
753 if (copy_from_user(&kfwdl, ufwdl, sizeof(struct mpt_fw_xfer))) {
754 printk(KERN_ERR MYNAM "%s@%d::_ioctl_fwdl - "
755 "Unable to copy mpt_fw_xfer struct @ %p\n",
756 __FILE__, __LINE__, ufwdl);
757 return -EFAULT;
758 }
759
760 return mptctl_do_fw_download(iocp, kfwdl.bufp, kfwdl.fwlen);
761}
762
763/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
764/*
765 * FW Download engine.
766 * Outputs: None.
767 * Return: 0 if successful
768 * -EFAULT if data unavailable
769 * -ENXIO if no such device
770 * -EAGAIN if resource problem
771 * -ENOMEM if no memory for SGE
772 * -EMLINK if too many chain buffers required
773 * -EBADRQC if adapter does not support FW download
774 * -EBUSY if adapter is busy
775 * -ENOMSG if FW upload returned bad status
776 */
777static int
778mptctl_do_fw_download(MPT_ADAPTER *iocp, char __user *ufwbuf, size_t fwlen)
779{
780 FWDownload_t *dlmsg;
781 MPT_FRAME_HDR *mf;
782 FWDownloadTCSGE_t *ptsge;
783 MptSge_t *sgl, *sgIn;
784 char *sgOut;
785 struct buflist *buflist;
786 struct buflist *bl;
787 dma_addr_t sgl_dma;
788 int ret;
789 int numfrags = 0;
790 int maxfrags;
791 int n = 0;
792 u32 sgdir;
793 u32 nib;
794 int fw_bytes_copied = 0;
795 int i;
796 int sge_offset = 0;
797 u16 iocstat;
798 pFWDownloadReply_t ReplyMsg = NULL;
799 unsigned long timeleft;
800
801 /* Valid device. Get a message frame and construct the FW download message.
802 */
803 if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL)
804 return -EAGAIN;
805
806 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT
807 "mptctl_do_fwdl called. mptctl_id = %xh.\n", iocp->name, mptctl_id));
808 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.bufp = %p\n",
809 iocp->name, ufwbuf));
810 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.fwlen = %d\n",
811 iocp->name, (int)fwlen));
812
813 dlmsg = (FWDownload_t*) mf;
814 ptsge = (FWDownloadTCSGE_t *) &dlmsg->SGL;
815 sgOut = (char *) (ptsge + 1);
816
817 /*
818 * Construct f/w download request
819 */
820 dlmsg->ImageType = MPI_FW_DOWNLOAD_ITYPE_FW;
821 dlmsg->Reserved = 0;
822 dlmsg->ChainOffset = 0;
823 dlmsg->Function = MPI_FUNCTION_FW_DOWNLOAD;
824 dlmsg->Reserved1[0] = dlmsg->Reserved1[1] = dlmsg->Reserved1[2] = 0;
825 if (iocp->facts.MsgVersion >= MPI_VERSION_01_05)
826 dlmsg->MsgFlags = MPI_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT;
827 else
828 dlmsg->MsgFlags = 0;
829
830
831 /* Set up the Transaction SGE.
832 */
833 ptsge->Reserved = 0;
834 ptsge->ContextSize = 0;
835 ptsge->DetailsLength = 12;
836 ptsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
837 ptsge->Reserved_0100_Checksum = 0;
838 ptsge->ImageOffset = 0;
839 ptsge->ImageSize = cpu_to_le32(fwlen);
840
841 /* Add the SGL
842 */
843
844 /*
845 * Need to kmalloc area(s) for holding firmware image bytes.
846 * But we need to do it piece meal, using a proper
847 * scatter gather list (with 128kB MAX hunks).
848 *
849 * A practical limit here might be # of sg hunks that fit into
850 * a single IOC request frame; 12 or 8 (see below), so:
851 * For FC9xx: 12 x 128kB == 1.5 mB (max)
852 * For C1030: 8 x 128kB == 1 mB (max)
853 * We could support chaining, but things get ugly(ier:)
854 *
855 * Set the sge_offset to the start of the sgl (bytes).
856 */
857 sgdir = 0x04000000; /* IOC will READ from sys mem */
858 sge_offset = sizeof(MPIHeader_t) + sizeof(FWDownloadTCSGE_t);
859 if ((sgl = kbuf_alloc_2_sgl(fwlen, sgdir, sge_offset,
860 &numfrags, &buflist, &sgl_dma, iocp)) == NULL)
861 return -ENOMEM;
862
863 /*
864 * We should only need SGL with 2 simple_32bit entries (up to 256 kB)
865 * for FC9xx f/w image, but calculate max number of sge hunks
866 * we can fit into a request frame, and limit ourselves to that.
867 * (currently no chain support)
868 * maxfrags = (Request Size - FWdownload Size ) / Size of 32 bit SGE
869 * Request maxfrags
870 * 128 12
871 * 96 8
872 * 64 4
873 */
874 maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) -
875 sizeof(FWDownloadTCSGE_t))
876 / iocp->SGE_size;
877 if (numfrags > maxfrags) {
878 ret = -EMLINK;
879 goto fwdl_out;
880 }
881
882 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: sgl buffer = %p, sgfrags = %d\n",
883 iocp->name, sgl, numfrags));
884
885 /*
886 * Parse SG list, copying sgl itself,
887 * plus f/w image hunks from user space as we go...
888 */
889 ret = -EFAULT;
890 sgIn = sgl;
891 bl = buflist;
892 for (i=0; i < numfrags; i++) {
893
894 /* Get the SGE type: 0 - TCSGE, 3 - Chain, 1 - Simple SGE
895 * Skip everything but Simple. If simple, copy from
896 * user space into kernel space.
897 * Note: we should not have anything but Simple as
898 * Chain SGE are illegal.
899 */
900 nib = (sgIn->FlagsLength & 0x30000000) >> 28;
901 if (nib == 0 || nib == 3) {
902 ;
903 } else if (sgIn->Address) {
904 iocp->add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
905 n++;
906 if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) {
907 printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - "
908 "Unable to copy f/w buffer hunk#%d @ %p\n",
909 iocp->name, __FILE__, __LINE__, n, ufwbuf);
910 goto fwdl_out;
911 }
912 fw_bytes_copied += bl->len;
913 }
914 sgIn++;
915 bl++;
916 sgOut += iocp->SGE_size;
917 }
918
919 DBG_DUMP_FW_DOWNLOAD(iocp, (u32 *)mf, numfrags);
920
921 /*
922 * Finally, perform firmware download.
923 */
924 ReplyMsg = NULL;
925 SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, dlmsg->MsgContext);
926 INITIALIZE_MGMT_STATUS(iocp->ioctl_cmds.status)
927 mpt_put_msg_frame(mptctl_id, iocp, mf);
928
929 /* Now wait for the command to complete */
930retry_wait:
931 timeleft = wait_for_completion_timeout(&iocp->ioctl_cmds.done, HZ*60);
932 if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
933 ret = -ETIME;
934 printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
935 if (iocp->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
936 mpt_free_msg_frame(iocp, mf);
937 goto fwdl_out;
938 }
939 if (!timeleft) {
940 printk(MYIOC_s_WARN_FMT
941 "FW download timeout, doorbell=0x%08x\n",
942 iocp->name, mpt_GetIocState(iocp, 0));
943 mptctl_timeout_expired(iocp, mf);
944 } else
945 goto retry_wait;
946 goto fwdl_out;
947 }
948
949 if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
950 printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
951 mpt_free_msg_frame(iocp, mf);
952 ret = -ENODATA;
953 goto fwdl_out;
954 }
955
956 if (sgl)
957 kfree_sgl(sgl, sgl_dma, buflist, iocp);
958
959 ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
960 iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
961 if (iocstat == MPI_IOCSTATUS_SUCCESS) {
962 printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name);
963 return 0;
964 } else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) {
965 printk(MYIOC_s_WARN_FMT "Hmmm... F/W download not supported!?!\n",
966 iocp->name);
967 printk(MYIOC_s_WARN_FMT "(time to go bang on somebodies door)\n",
968 iocp->name);
969 return -EBADRQC;
970 } else if (iocstat == MPI_IOCSTATUS_BUSY) {
971 printk(MYIOC_s_WARN_FMT "IOC_BUSY!\n", iocp->name);
972 printk(MYIOC_s_WARN_FMT "(try again later?)\n", iocp->name);
973 return -EBUSY;
974 } else {
975 printk(MYIOC_s_WARN_FMT "ioctl_fwdl() returned [bad] status = %04xh\n",
976 iocp->name, iocstat);
977 printk(MYIOC_s_WARN_FMT "(bad VooDoo)\n", iocp->name);
978 return -ENOMSG;
979 }
980 return 0;
981
982fwdl_out:
983
984 CLEAR_MGMT_STATUS(iocp->ioctl_cmds.status);
985 SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, 0);
986 kfree_sgl(sgl, sgl_dma, buflist, iocp);
987 return ret;
988}
989
990/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
991/*
992 * SGE Allocation routine
993 *
994 * Inputs: bytes - number of bytes to be transferred
995 * sgdir - data direction
996 * sge_offset - offset (in bytes) from the start of the request
997 * frame to the first SGE
998 * ioc - pointer to the mptadapter
999 * Outputs: frags - number of scatter gather elements
1000 * blp - point to the buflist pointer
1001 * sglbuf_dma - pointer to the (dma) sgl
1002 * Returns: Null if failes
1003 * pointer to the (virtual) sgl if successful.
1004 */
1005static MptSge_t *
1006kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags,
1007 struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc)
1008{
1009 MptSge_t *sglbuf = NULL; /* pointer to array of SGE */
1010 /* and chain buffers */
1011 struct buflist *buflist = NULL; /* kernel routine */
1012 MptSge_t *sgl;
1013 int numfrags = 0;
1014 int fragcnt = 0;
1015 int alloc_sz = min(bytes,MAX_KMALLOC_SZ); // avoid kernel warning msg!
1016 int bytes_allocd = 0;
1017 int this_alloc;
1018 dma_addr_t pa; // phys addr
1019 int i, buflist_ent;
1020 int sg_spill = MAX_FRAGS_SPILL1;
1021 int dir;
1022
1023 if (bytes < 0)
1024 return NULL;
1025
1026 /* initialization */
1027 *frags = 0;
1028 *blp = NULL;
1029
1030 /* Allocate and initialize an array of kernel
1031 * structures for the SG elements.
1032 */
1033 i = MAX_SGL_BYTES / 8;
1034 buflist = kzalloc(i, GFP_USER);
1035 if (!buflist)
1036 return NULL;
1037 buflist_ent = 0;
1038
1039 /* Allocate a single block of memory to store the sg elements and
1040 * the chain buffers. The calling routine is responsible for
1041 * copying the data in this array into the correct place in the
1042 * request and chain buffers.
1043 */
1044 sglbuf = pci_alloc_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf_dma);
1045 if (sglbuf == NULL)
1046 goto free_and_fail;
1047
1048 if (sgdir & 0x04000000)
1049 dir = PCI_DMA_TODEVICE;
1050 else
1051 dir = PCI_DMA_FROMDEVICE;
1052
1053 /* At start:
1054 * sgl = sglbuf = point to beginning of sg buffer
1055 * buflist_ent = 0 = first kernel structure
1056 * sg_spill = number of SGE that can be written before the first
1057 * chain element.
1058 *
1059 */
1060 sgl = sglbuf;
1061 sg_spill = ((ioc->req_sz - sge_offset)/ioc->SGE_size) - 1;
1062 while (bytes_allocd < bytes) {
1063 this_alloc = min(alloc_sz, bytes-bytes_allocd);
1064 buflist[buflist_ent].len = this_alloc;
1065 buflist[buflist_ent].kptr = pci_alloc_consistent(ioc->pcidev,
1066 this_alloc,
1067 &pa);
1068 if (buflist[buflist_ent].kptr == NULL) {
1069 alloc_sz = alloc_sz / 2;
1070 if (alloc_sz == 0) {
1071 printk(MYIOC_s_WARN_FMT "-SG: No can do - "
1072 "not enough memory! :-(\n", ioc->name);
1073 printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n",
1074 ioc->name, numfrags);
1075 goto free_and_fail;
1076 }
1077 continue;
1078 } else {
1079 dma_addr_t dma_addr;
1080
1081 bytes_allocd += this_alloc;
1082 sgl->FlagsLength = (0x10000000|sgdir|this_alloc);
1083 dma_addr = pci_map_single(ioc->pcidev,
1084 buflist[buflist_ent].kptr, this_alloc, dir);
1085 sgl->Address = dma_addr;
1086
1087 fragcnt++;
1088 numfrags++;
1089 sgl++;
1090 buflist_ent++;
1091 }
1092
1093 if (bytes_allocd >= bytes)
1094 break;
1095
1096 /* Need to chain? */
1097 if (fragcnt == sg_spill) {
1098 printk(MYIOC_s_WARN_FMT
1099 "-SG: No can do - " "Chain required! :-(\n", ioc->name);
1100 printk(MYIOC_s_WARN_FMT "(freeing %d frags)\n", ioc->name, numfrags);
1101 goto free_and_fail;
1102 }
1103
1104 /* overflow check... */
1105 if (numfrags*8 > MAX_SGL_BYTES){
1106 /* GRRRRR... */
1107 printk(MYIOC_s_WARN_FMT "-SG: No can do - "
1108 "too many SG frags! :-(\n", ioc->name);
1109 printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n",
1110 ioc->name, numfrags);
1111 goto free_and_fail;
1112 }
1113 }
1114
1115 /* Last sge fixup: set LE+eol+eob bits */
1116 sgl[-1].FlagsLength |= 0xC1000000;
1117
1118 *frags = numfrags;
1119 *blp = buflist;
1120
1121 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - "
1122 "%d SG frags generated!\n", ioc->name, numfrags));
1123
1124 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - "
1125 "last (big) alloc_sz=%d\n", ioc->name, alloc_sz));
1126
1127 return sglbuf;
1128
1129free_and_fail:
1130 if (sglbuf != NULL) {
1131 for (i = 0; i < numfrags; i++) {
1132 dma_addr_t dma_addr;
1133 u8 *kptr;
1134 int len;
1135
1136 if ((sglbuf[i].FlagsLength >> 24) == 0x30)
1137 continue;
1138
1139 dma_addr = sglbuf[i].Address;
1140 kptr = buflist[i].kptr;
1141 len = buflist[i].len;
1142
1143 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr);
1144 }
1145 pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf, *sglbuf_dma);
1146 }
1147 kfree(buflist);
1148 return NULL;
1149}
1150
1151/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1152/*
1153 * Routine to free the SGL elements.
1154 */
1155static void
1156kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, struct buflist *buflist, MPT_ADAPTER *ioc)
1157{
1158 MptSge_t *sg = sgl;
1159 struct buflist *bl = buflist;
1160 u32 nib;
1161 int dir;
1162 int n = 0;
1163
1164 if (sg->FlagsLength & 0x04000000)
1165 dir = PCI_DMA_TODEVICE;
1166 else
1167 dir = PCI_DMA_FROMDEVICE;
1168
1169 nib = (sg->FlagsLength & 0xF0000000) >> 28;
1170 while (! (nib & 0x4)) { /* eob */
1171 /* skip ignore/chain. */
1172 if (nib == 0 || nib == 3) {
1173 ;
1174 } else if (sg->Address) {
1175 dma_addr_t dma_addr;
1176 void *kptr;
1177 int len;
1178
1179 dma_addr = sg->Address;
1180 kptr = bl->kptr;
1181 len = bl->len;
1182 pci_unmap_single(ioc->pcidev, dma_addr, len, dir);
1183 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr);
1184 n++;
1185 }
1186 sg++;
1187 bl++;
1188 nib = (le32_to_cpu(sg->FlagsLength) & 0xF0000000) >> 28;
1189 }
1190
1191 /* we're at eob! */
1192 if (sg->Address) {
1193 dma_addr_t dma_addr;
1194 void *kptr;
1195 int len;
1196
1197 dma_addr = sg->Address;
1198 kptr = bl->kptr;
1199 len = bl->len;
1200 pci_unmap_single(ioc->pcidev, dma_addr, len, dir);
1201 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr);
1202 n++;
1203 }
1204
1205 pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sgl, sgl_dma);
1206 kfree(buflist);
1207 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: Free'd 1 SGL buf + %d kbufs!\n",
1208 ioc->name, n));
1209}
1210
1211/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1212/*
1213 * mptctl_getiocinfo - Query the host adapter for IOC information.
1214 * @arg: User space argument
1215 *
1216 * Outputs: None.
1217 * Return: 0 if successful
1218 * -EFAULT if data unavailable
1219 * -ENODEV if no such device/adapter
1220 */
1221static int
1222mptctl_getiocinfo (MPT_ADAPTER *ioc, unsigned long arg, unsigned int data_size)
1223{
1224 struct mpt_ioctl_iocinfo __user *uarg = (void __user *) arg;
1225 struct mpt_ioctl_iocinfo *karg;
1226 struct pci_dev *pdev;
1227 unsigned int port;
1228 int cim_rev;
1229 struct scsi_device *sdev;
1230 VirtDevice *vdevice;
1231
1232 /* Add of PCI INFO results in unaligned access for
1233 * IA64 and Sparc. Reset long to int. Return no PCI
1234 * data for obsolete format.
1235 */
1236 if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev0))
1237 cim_rev = 0;
1238 else if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev1))
1239 cim_rev = 1;
1240 else if (data_size == sizeof(struct mpt_ioctl_iocinfo))
1241 cim_rev = 2;
1242 else if (data_size == (sizeof(struct mpt_ioctl_iocinfo_rev0)+12))
1243 cim_rev = 0; /* obsolete */
1244 else
1245 return -EFAULT;
1246
1247 karg = memdup_user(uarg, data_size);
1248 if (IS_ERR(karg)) {
1249 printk(KERN_ERR MYNAM "%s@%d::mpt_ioctl_iocinfo() - memdup_user returned error [%ld]\n",
1250 __FILE__, __LINE__, PTR_ERR(karg));
1251 return PTR_ERR(karg);
1252 }
1253
1254 /* Verify the data transfer size is correct. */
1255 if (karg->hdr.maxDataSize != data_size) {
1256 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - "
1257 "Structure size mismatch. Command not completed.\n",
1258 ioc->name, __FILE__, __LINE__);
1259 kfree(karg);
1260 return -EFAULT;
1261 }
1262
1263 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_getiocinfo called.\n",
1264 ioc->name));
1265
1266 /* Fill in the data and return the structure to the calling
1267 * program
1268 */
1269 if (ioc->bus_type == SAS)
1270 karg->adapterType = MPT_IOCTL_INTERFACE_SAS;
1271 else if (ioc->bus_type == FC)
1272 karg->adapterType = MPT_IOCTL_INTERFACE_FC;
1273 else
1274 karg->adapterType = MPT_IOCTL_INTERFACE_SCSI;
1275
1276 if (karg->hdr.port > 1) {
1277 kfree(karg);
1278 return -EINVAL;
1279 }
1280 port = karg->hdr.port;
1281
1282 karg->port = port;
1283 pdev = (struct pci_dev *) ioc->pcidev;
1284
1285 karg->pciId = pdev->device;
1286 karg->hwRev = pdev->revision;
1287 karg->subSystemDevice = pdev->subsystem_device;
1288 karg->subSystemVendor = pdev->subsystem_vendor;
1289
1290 if (cim_rev == 1) {
1291 /* Get the PCI bus, device, and function numbers for the IOC
1292 */
1293 karg->pciInfo.u.bits.busNumber = pdev->bus->number;
1294 karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn );
1295 karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
1296 } else if (cim_rev == 2) {
1297 /* Get the PCI bus, device, function and segment ID numbers
1298 for the IOC */
1299 karg->pciInfo.u.bits.busNumber = pdev->bus->number;
1300 karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn );
1301 karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
1302 karg->pciInfo.segmentID = pci_domain_nr(pdev->bus);
1303 }
1304
1305 /* Get number of devices
1306 */
1307 karg->numDevices = 0;
1308 if (ioc->sh) {
1309 shost_for_each_device(sdev, ioc->sh) {
1310 vdevice = sdev->hostdata;
1311 if (vdevice == NULL || vdevice->vtarget == NULL)
1312 continue;
1313 if (vdevice->vtarget->tflags &
1314 MPT_TARGET_FLAGS_RAID_COMPONENT)
1315 continue;
1316 karg->numDevices++;
1317 }
1318 }
1319
1320 /* Set the BIOS and FW Version
1321 */
1322 karg->FWVersion = ioc->facts.FWVersion.Word;
1323 karg->BIOSVersion = ioc->biosVersion;
1324
1325 /* Set the Version Strings.
1326 */
1327 strncpy (karg->driverVersion, MPT_LINUX_PACKAGE_NAME, MPT_IOCTL_VERSION_LENGTH);
1328 karg->driverVersion[MPT_IOCTL_VERSION_LENGTH-1]='\0';
1329
1330 karg->busChangeEvent = 0;
1331 karg->hostId = ioc->pfacts[port].PortSCSIID;
1332 karg->rsvd[0] = karg->rsvd[1] = 0;
1333
1334 /* Copy the data from kernel memory to user memory
1335 */
1336 if (copy_to_user((char __user *)arg, karg, data_size)) {
1337 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - "
1338 "Unable to write out mpt_ioctl_iocinfo struct @ %p\n",
1339 ioc->name, __FILE__, __LINE__, uarg);
1340 kfree(karg);
1341 return -EFAULT;
1342 }
1343
1344 kfree(karg);
1345 return 0;
1346}
1347
1348/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1349/*
1350 * mptctl_gettargetinfo - Query the host adapter for target information.
1351 * @arg: User space argument
1352 *
1353 * Outputs: None.
1354 * Return: 0 if successful
1355 * -EFAULT if data unavailable
1356 * -ENODEV if no such device/adapter
1357 */
1358static int
1359mptctl_gettargetinfo (MPT_ADAPTER *ioc, unsigned long arg)
1360{
1361 struct mpt_ioctl_targetinfo __user *uarg = (void __user *) arg;
1362 struct mpt_ioctl_targetinfo karg;
1363 VirtDevice *vdevice;
1364 char *pmem;
1365 int *pdata;
1366 int numDevices = 0;
1367 int lun;
1368 int maxWordsLeft;
1369 int numBytes;
1370 struct scsi_device *sdev;
1371
1372 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_targetinfo))) {
1373 printk(KERN_ERR MYNAM "%s@%d::mptctl_gettargetinfo - "
1374 "Unable to read in mpt_ioctl_targetinfo struct @ %p\n",
1375 __FILE__, __LINE__, uarg);
1376 return -EFAULT;
1377 }
1378
1379 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_gettargetinfo called.\n",
1380 ioc->name));
1381 numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header);
1382 maxWordsLeft = numBytes/sizeof(int);
1383
1384 if (maxWordsLeft <= 0) {
1385 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n",
1386 ioc->name, __FILE__, __LINE__);
1387 return -ENOMEM;
1388 }
1389
1390 /* Fill in the data and return the structure to the calling
1391 * program
1392 */
1393
1394 /* struct mpt_ioctl_targetinfo does not contain sufficient space
1395 * for the target structures so when the IOCTL is called, there is
1396 * not sufficient stack space for the structure. Allocate memory,
1397 * populate the memory, copy back to the user, then free memory.
1398 * targetInfo format:
1399 * bits 31-24: reserved
1400 * 23-16: LUN
1401 * 15- 8: Bus Number
1402 * 7- 0: Target ID
1403 */
1404 pmem = kzalloc(numBytes, GFP_KERNEL);
1405 if (!pmem) {
1406 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n",
1407 ioc->name, __FILE__, __LINE__);
1408 return -ENOMEM;
1409 }
1410 pdata = (int *) pmem;
1411
1412 /* Get number of devices
1413 */
1414 if (ioc->sh){
1415 shost_for_each_device(sdev, ioc->sh) {
1416 if (!maxWordsLeft)
1417 continue;
1418 vdevice = sdev->hostdata;
1419 if (vdevice == NULL || vdevice->vtarget == NULL)
1420 continue;
1421 if (vdevice->vtarget->tflags &
1422 MPT_TARGET_FLAGS_RAID_COMPONENT)
1423 continue;
1424 lun = (vdevice->vtarget->raidVolume) ? 0x80 : vdevice->lun;
1425 *pdata = (((u8)lun << 16) + (vdevice->vtarget->channel << 8) +
1426 (vdevice->vtarget->id ));
1427 pdata++;
1428 numDevices++;
1429 --maxWordsLeft;
1430 }
1431 }
1432 karg.numDevices = numDevices;
1433
1434 /* Copy part of the data from kernel memory to user memory
1435 */
1436 if (copy_to_user((char __user *)arg, &karg,
1437 sizeof(struct mpt_ioctl_targetinfo))) {
1438 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - "
1439 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n",
1440 ioc->name, __FILE__, __LINE__, uarg);
1441 kfree(pmem);
1442 return -EFAULT;
1443 }
1444
1445 /* Copy the remaining data from kernel memory to user memory
1446 */
1447 if (copy_to_user(uarg->targetInfo, pmem, numBytes)) {
1448 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - "
1449 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n",
1450 ioc->name, __FILE__, __LINE__, pdata);
1451 kfree(pmem);
1452 return -EFAULT;
1453 }
1454
1455 kfree(pmem);
1456
1457 return 0;
1458}
1459
1460/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1461/* MPT IOCTL Test function.
1462 *
1463 * Outputs: None.
1464 * Return: 0 if successful
1465 * -EFAULT if data unavailable
1466 * -ENODEV if no such device/adapter
1467 */
1468static int
1469mptctl_readtest (MPT_ADAPTER *ioc, unsigned long arg)
1470{
1471 struct mpt_ioctl_test __user *uarg = (void __user *) arg;
1472 struct mpt_ioctl_test karg;
1473
1474 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_test))) {
1475 printk(KERN_ERR MYNAM "%s@%d::mptctl_readtest - "
1476 "Unable to read in mpt_ioctl_test struct @ %p\n",
1477 __FILE__, __LINE__, uarg);
1478 return -EFAULT;
1479 }
1480
1481 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_readtest called.\n",
1482 ioc->name));
1483 /* Fill in the data and return the structure to the calling
1484 * program
1485 */
1486
1487#ifdef MFCNT
1488 karg.chip_type = ioc->mfcnt;
1489#else
1490 karg.chip_type = ioc->pcidev->device;
1491#endif
1492 strncpy (karg.name, ioc->name, MPT_MAX_NAME);
1493 karg.name[MPT_MAX_NAME-1]='\0';
1494 strncpy (karg.product, ioc->prod_name, MPT_PRODUCT_LENGTH);
1495 karg.product[MPT_PRODUCT_LENGTH-1]='\0';
1496
1497 /* Copy the data from kernel memory to user memory
1498 */
1499 if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_test))) {
1500 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_readtest - "
1501 "Unable to write out mpt_ioctl_test struct @ %p\n",
1502 ioc->name, __FILE__, __LINE__, uarg);
1503 return -EFAULT;
1504 }
1505
1506 return 0;
1507}
1508
1509/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1510/*
1511 * mptctl_eventquery - Query the host adapter for the event types
1512 * that are being logged.
1513 * @arg: User space argument
1514 *
1515 * Outputs: None.
1516 * Return: 0 if successful
1517 * -EFAULT if data unavailable
1518 * -ENODEV if no such device/adapter
1519 */
1520static int
1521mptctl_eventquery (MPT_ADAPTER *ioc, unsigned long arg)
1522{
1523 struct mpt_ioctl_eventquery __user *uarg = (void __user *) arg;
1524 struct mpt_ioctl_eventquery karg;
1525
1526 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventquery))) {
1527 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventquery - "
1528 "Unable to read in mpt_ioctl_eventquery struct @ %p\n",
1529 __FILE__, __LINE__, uarg);
1530 return -EFAULT;
1531 }
1532
1533 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventquery called.\n",
1534 ioc->name));
1535 karg.eventEntries = MPTCTL_EVENT_LOG_SIZE;
1536 karg.eventTypes = ioc->eventTypes;
1537
1538 /* Copy the data from kernel memory to user memory
1539 */
1540 if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_eventquery))) {
1541 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventquery - "
1542 "Unable to write out mpt_ioctl_eventquery struct @ %p\n",
1543 ioc->name, __FILE__, __LINE__, uarg);
1544 return -EFAULT;
1545 }
1546 return 0;
1547}
1548
1549/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1550static int
1551mptctl_eventenable (MPT_ADAPTER *ioc, unsigned long arg)
1552{
1553 struct mpt_ioctl_eventenable __user *uarg = (void __user *) arg;
1554 struct mpt_ioctl_eventenable karg;
1555
1556 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventenable))) {
1557 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventenable - "
1558 "Unable to read in mpt_ioctl_eventenable struct @ %p\n",
1559 __FILE__, __LINE__, uarg);
1560 return -EFAULT;
1561 }
1562
1563 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventenable called.\n",
1564 ioc->name));
1565 if (ioc->events == NULL) {
1566 /* Have not yet allocated memory - do so now.
1567 */
1568 int sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
1569 ioc->events = kzalloc(sz, GFP_KERNEL);
1570 if (!ioc->events) {
1571 printk(MYIOC_s_ERR_FMT
1572 ": ERROR - Insufficient memory to add adapter!\n",
1573 ioc->name);
1574 return -ENOMEM;
1575 }
1576 ioc->alloc_total += sz;
1577
1578 ioc->eventContext = 0;
1579 }
1580
1581 /* Update the IOC event logging flag.
1582 */
1583 ioc->eventTypes = karg.eventTypes;
1584
1585 return 0;
1586}
1587
1588/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1589static int
1590mptctl_eventreport (MPT_ADAPTER *ioc, unsigned long arg)
1591{
1592 struct mpt_ioctl_eventreport __user *uarg = (void __user *) arg;
1593 struct mpt_ioctl_eventreport karg;
1594 int numBytes, maxEvents, max;
1595
1596 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventreport))) {
1597 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventreport - "
1598 "Unable to read in mpt_ioctl_eventreport struct @ %p\n",
1599 __FILE__, __LINE__, uarg);
1600 return -EFAULT;
1601 }
1602
1603 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventreport called.\n",
1604 ioc->name));
1605
1606 numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header);
1607 maxEvents = numBytes/sizeof(MPT_IOCTL_EVENTS);
1608
1609
1610 max = MPTCTL_EVENT_LOG_SIZE < maxEvents ? MPTCTL_EVENT_LOG_SIZE : maxEvents;
1611
1612 /* If fewer than 1 event is requested, there must have
1613 * been some type of error.
1614 */
1615 if ((max < 1) || !ioc->events)
1616 return -ENODATA;
1617
1618 /* reset this flag so SIGIO can restart */
1619 ioc->aen_event_read_flag=0;
1620
1621 /* Copy the data from kernel memory to user memory
1622 */
1623 numBytes = max * sizeof(MPT_IOCTL_EVENTS);
1624 if (copy_to_user(uarg->eventData, ioc->events, numBytes)) {
1625 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventreport - "
1626 "Unable to write out mpt_ioctl_eventreport struct @ %p\n",
1627 ioc->name, __FILE__, __LINE__, ioc->events);
1628 return -EFAULT;
1629 }
1630
1631 return 0;
1632}
1633
1634/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1635static int
1636mptctl_replace_fw (MPT_ADAPTER *ioc, unsigned long arg)
1637{
1638 struct mpt_ioctl_replace_fw __user *uarg = (void __user *) arg;
1639 struct mpt_ioctl_replace_fw karg;
1640 int newFwSize;
1641
1642 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_replace_fw))) {
1643 printk(KERN_ERR MYNAM "%s@%d::mptctl_replace_fw - "
1644 "Unable to read in mpt_ioctl_replace_fw struct @ %p\n",
1645 __FILE__, __LINE__, uarg);
1646 return -EFAULT;
1647 }
1648
1649 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_replace_fw called.\n",
1650 ioc->name));
1651 /* If caching FW, Free the old FW image
1652 */
1653 if (ioc->cached_fw == NULL)
1654 return 0;
1655
1656 mpt_free_fw_memory(ioc);
1657
1658 /* Allocate memory for the new FW image
1659 */
1660 newFwSize = ALIGN(karg.newImageSize, 4);
1661
1662 mpt_alloc_fw_memory(ioc, newFwSize);
1663 if (ioc->cached_fw == NULL)
1664 return -ENOMEM;
1665
1666 /* Copy the data from user memory to kernel space
1667 */
1668 if (copy_from_user(ioc->cached_fw, uarg->newImage, newFwSize)) {
1669 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_replace_fw - "
1670 "Unable to read in mpt_ioctl_replace_fw image "
1671 "@ %p\n", ioc->name, __FILE__, __LINE__, uarg);
1672 mpt_free_fw_memory(ioc);
1673 return -EFAULT;
1674 }
1675
1676 /* Update IOCFactsReply
1677 */
1678 ioc->facts.FWImageSize = newFwSize;
1679 return 0;
1680}
1681
1682/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1683/* MPT IOCTL MPTCOMMAND function.
1684 * Cast the arg into the mpt_ioctl_mpt_command structure.
1685 *
1686 * Outputs: None.
1687 * Return: 0 if successful
1688 * -EBUSY if previous command timeout and IOC reset is not complete.
1689 * -EFAULT if data unavailable
1690 * -ENODEV if no such device/adapter
1691 * -ETIME if timer expires
1692 * -ENOMEM if memory allocation error
1693 */
1694static int
1695mptctl_mpt_command (MPT_ADAPTER *ioc, unsigned long arg)
1696{
1697 struct mpt_ioctl_command __user *uarg = (void __user *) arg;
1698 struct mpt_ioctl_command karg;
1699 int rc;
1700
1701
1702 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_command))) {
1703 printk(KERN_ERR MYNAM "%s@%d::mptctl_mpt_command - "
1704 "Unable to read in mpt_ioctl_command struct @ %p\n",
1705 __FILE__, __LINE__, uarg);
1706 return -EFAULT;
1707 }
1708
1709 rc = mptctl_do_mpt_command (ioc, karg, &uarg->MF);
1710
1711 return rc;
1712}
1713
1714/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1715/* Worker routine for the IOCTL MPTCOMMAND and MPTCOMMAND32 (sparc) commands.
1716 *
1717 * Outputs: None.
1718 * Return: 0 if successful
1719 * -EBUSY if previous command timeout and IOC reset is not complete.
1720 * -EFAULT if data unavailable
1721 * -ENODEV if no such device/adapter
1722 * -ETIME if timer expires
1723 * -ENOMEM if memory allocation error
1724 * -EPERM if SCSI I/O and target is untagged
1725 */
1726static int
1727mptctl_do_mpt_command (MPT_ADAPTER *ioc, struct mpt_ioctl_command karg, void __user *mfPtr)
1728{
1729 MPT_FRAME_HDR *mf = NULL;
1730 MPIHeader_t *hdr;
1731 char *psge;
1732 struct buflist bufIn; /* data In buffer */
1733 struct buflist bufOut; /* data Out buffer */
1734 dma_addr_t dma_addr_in;
1735 dma_addr_t dma_addr_out;
1736 int sgSize = 0; /* Num SG elements */
1737 int flagsLength;
1738 int sz, rc = 0;
1739 int msgContext;
1740 u16 req_idx;
1741 ulong timeout;
1742 unsigned long timeleft;
1743 struct scsi_device *sdev;
1744 unsigned long flags;
1745 u8 function;
1746
1747 /* bufIn and bufOut are used for user to kernel space transfers
1748 */
1749 bufIn.kptr = bufOut.kptr = NULL;
1750 bufIn.len = bufOut.len = 0;
1751
1752 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
1753 if (ioc->ioc_reset_in_progress) {
1754 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
1755 printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
1756 "Busy with diagnostic reset\n", __FILE__, __LINE__);
1757 return -EBUSY;
1758 }
1759 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
1760
1761 /* Basic sanity checks to prevent underflows or integer overflows */
1762 if (karg.maxReplyBytes < 0 ||
1763 karg.dataInSize < 0 ||
1764 karg.dataOutSize < 0 ||
1765 karg.dataSgeOffset < 0 ||
1766 karg.maxSenseBytes < 0 ||
1767 karg.dataSgeOffset > ioc->req_sz / 4)
1768 return -EINVAL;
1769
1770 /* Verify that the final request frame will not be too large.
1771 */
1772 sz = karg.dataSgeOffset * 4;
1773 if (karg.dataInSize > 0)
1774 sz += ioc->SGE_size;
1775 if (karg.dataOutSize > 0)
1776 sz += ioc->SGE_size;
1777
1778 if (sz > ioc->req_sz) {
1779 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1780 "Request frame too large (%d) maximum (%d)\n",
1781 ioc->name, __FILE__, __LINE__, sz, ioc->req_sz);
1782 return -EFAULT;
1783 }
1784
1785 /* Get a free request frame and save the message context.
1786 */
1787 if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL)
1788 return -EAGAIN;
1789
1790 hdr = (MPIHeader_t *) mf;
1791 msgContext = le32_to_cpu(hdr->MsgContext);
1792 req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
1793
1794 /* Copy the request frame
1795 * Reset the saved message context.
1796 * Request frame in user space
1797 */
1798 if (copy_from_user(mf, mfPtr, karg.dataSgeOffset * 4)) {
1799 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1800 "Unable to read MF from mpt_ioctl_command struct @ %p\n",
1801 ioc->name, __FILE__, __LINE__, mfPtr);
1802 function = -1;
1803 rc = -EFAULT;
1804 goto done_free_mem;
1805 }
1806 hdr->MsgContext = cpu_to_le32(msgContext);
1807 function = hdr->Function;
1808
1809
1810 /* Verify that this request is allowed.
1811 */
1812 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n",
1813 ioc->name, hdr->Function, mf));
1814
1815 switch (function) {
1816 case MPI_FUNCTION_IOC_FACTS:
1817 case MPI_FUNCTION_PORT_FACTS:
1818 karg.dataOutSize = karg.dataInSize = 0;
1819 break;
1820
1821 case MPI_FUNCTION_CONFIG:
1822 {
1823 Config_t *config_frame;
1824 config_frame = (Config_t *)mf;
1825 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\ttype=0x%02x ext_type=0x%02x "
1826 "number=0x%02x action=0x%02x\n", ioc->name,
1827 config_frame->Header.PageType,
1828 config_frame->ExtPageType,
1829 config_frame->Header.PageNumber,
1830 config_frame->Action));
1831 break;
1832 }
1833
1834 case MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND:
1835 case MPI_FUNCTION_FC_EX_LINK_SRVC_SEND:
1836 case MPI_FUNCTION_FW_UPLOAD:
1837 case MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
1838 case MPI_FUNCTION_FW_DOWNLOAD:
1839 case MPI_FUNCTION_FC_PRIMITIVE_SEND:
1840 case MPI_FUNCTION_TOOLBOX:
1841 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
1842 break;
1843
1844 case MPI_FUNCTION_SCSI_IO_REQUEST:
1845 if (ioc->sh) {
1846 SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
1847 int qtag = MPI_SCSIIO_CONTROL_UNTAGGED;
1848 int scsidir = 0;
1849 int dataSize;
1850 u32 id;
1851
1852 id = (ioc->devices_per_bus == 0) ? 256 : ioc->devices_per_bus;
1853 if (pScsiReq->TargetID > id) {
1854 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1855 "Target ID out of bounds. \n",
1856 ioc->name, __FILE__, __LINE__);
1857 rc = -ENODEV;
1858 goto done_free_mem;
1859 }
1860
1861 if (pScsiReq->Bus >= ioc->number_of_buses) {
1862 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1863 "Target Bus out of bounds. \n",
1864 ioc->name, __FILE__, __LINE__);
1865 rc = -ENODEV;
1866 goto done_free_mem;
1867 }
1868
1869 pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
1870 pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
1871
1872
1873 /* verify that app has not requested
1874 * more sense data than driver
1875 * can provide, if so, reset this parameter
1876 * set the sense buffer pointer low address
1877 * update the control field to specify Q type
1878 */
1879 if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE)
1880 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
1881 else
1882 pScsiReq->SenseBufferLength = karg.maxSenseBytes;
1883
1884 pScsiReq->SenseBufferLowAddr =
1885 cpu_to_le32(ioc->sense_buf_low_dma
1886 + (req_idx * MPT_SENSE_BUFFER_ALLOC));
1887
1888 shost_for_each_device(sdev, ioc->sh) {
1889 struct scsi_target *starget = scsi_target(sdev);
1890 VirtTarget *vtarget = starget->hostdata;
1891
1892 if (vtarget == NULL)
1893 continue;
1894
1895 if ((pScsiReq->TargetID == vtarget->id) &&
1896 (pScsiReq->Bus == vtarget->channel) &&
1897 (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
1898 qtag = MPI_SCSIIO_CONTROL_SIMPLEQ;
1899 }
1900
1901 /* Have the IOCTL driver set the direction based
1902 * on the dataOutSize (ordering issue with Sparc).
1903 */
1904 if (karg.dataOutSize > 0) {
1905 scsidir = MPI_SCSIIO_CONTROL_WRITE;
1906 dataSize = karg.dataOutSize;
1907 } else {
1908 scsidir = MPI_SCSIIO_CONTROL_READ;
1909 dataSize = karg.dataInSize;
1910 }
1911
1912 pScsiReq->Control = cpu_to_le32(scsidir | qtag);
1913 pScsiReq->DataLength = cpu_to_le32(dataSize);
1914
1915
1916 } else {
1917 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1918 "SCSI driver is not loaded. \n",
1919 ioc->name, __FILE__, __LINE__);
1920 rc = -EFAULT;
1921 goto done_free_mem;
1922 }
1923 break;
1924
1925 case MPI_FUNCTION_SMP_PASSTHROUGH:
1926 /* Check mf->PassthruFlags to determine if
1927 * transfer is ImmediateMode or not.
1928 * Immediate mode returns data in the ReplyFrame.
1929 * Else, we are sending request and response data
1930 * in two SGLs at the end of the mf.
1931 */
1932 break;
1933
1934 case MPI_FUNCTION_SATA_PASSTHROUGH:
1935 if (!ioc->sh) {
1936 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1937 "SCSI driver is not loaded. \n",
1938 ioc->name, __FILE__, __LINE__);
1939 rc = -EFAULT;
1940 goto done_free_mem;
1941 }
1942 break;
1943
1944 case MPI_FUNCTION_RAID_ACTION:
1945 /* Just add a SGE
1946 */
1947 break;
1948
1949 case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
1950 if (ioc->sh) {
1951 SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
1952 int qtag = MPI_SCSIIO_CONTROL_SIMPLEQ;
1953 int scsidir = MPI_SCSIIO_CONTROL_READ;
1954 int dataSize;
1955
1956 pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
1957 pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
1958
1959
1960 /* verify that app has not requested
1961 * more sense data than driver
1962 * can provide, if so, reset this parameter
1963 * set the sense buffer pointer low address
1964 * update the control field to specify Q type
1965 */
1966 if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE)
1967 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
1968 else
1969 pScsiReq->SenseBufferLength = karg.maxSenseBytes;
1970
1971 pScsiReq->SenseBufferLowAddr =
1972 cpu_to_le32(ioc->sense_buf_low_dma
1973 + (req_idx * MPT_SENSE_BUFFER_ALLOC));
1974
1975 /* All commands to physical devices are tagged
1976 */
1977
1978 /* Have the IOCTL driver set the direction based
1979 * on the dataOutSize (ordering issue with Sparc).
1980 */
1981 if (karg.dataOutSize > 0) {
1982 scsidir = MPI_SCSIIO_CONTROL_WRITE;
1983 dataSize = karg.dataOutSize;
1984 } else {
1985 scsidir = MPI_SCSIIO_CONTROL_READ;
1986 dataSize = karg.dataInSize;
1987 }
1988
1989 pScsiReq->Control = cpu_to_le32(scsidir | qtag);
1990 pScsiReq->DataLength = cpu_to_le32(dataSize);
1991
1992 } else {
1993 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
1994 "SCSI driver is not loaded. \n",
1995 ioc->name, __FILE__, __LINE__);
1996 rc = -EFAULT;
1997 goto done_free_mem;
1998 }
1999 break;
2000
2001 case MPI_FUNCTION_SCSI_TASK_MGMT:
2002 {
2003 SCSITaskMgmt_t *pScsiTm;
2004 pScsiTm = (SCSITaskMgmt_t *)mf;
2005 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2006 "\tTaskType=0x%x MsgFlags=0x%x "
2007 "TaskMsgContext=0x%x id=%d channel=%d\n",
2008 ioc->name, pScsiTm->TaskType, le32_to_cpu
2009 (pScsiTm->TaskMsgContext), pScsiTm->MsgFlags,
2010 pScsiTm->TargetID, pScsiTm->Bus));
2011 break;
2012 }
2013
2014 case MPI_FUNCTION_IOC_INIT:
2015 {
2016 IOCInit_t *pInit = (IOCInit_t *) mf;
2017 u32 high_addr, sense_high;
2018
2019 /* Verify that all entries in the IOC INIT match
2020 * existing setup (and in LE format).
2021 */
2022 if (sizeof(dma_addr_t) == sizeof(u64)) {
2023 high_addr = cpu_to_le32((u32)((u64)ioc->req_frames_dma >> 32));
2024 sense_high= cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
2025 } else {
2026 high_addr = 0;
2027 sense_high= 0;
2028 }
2029
2030 if ((pInit->Flags != 0) || (pInit->MaxDevices != ioc->facts.MaxDevices) ||
2031 (pInit->MaxBuses != ioc->facts.MaxBuses) ||
2032 (pInit->ReplyFrameSize != cpu_to_le16(ioc->reply_sz)) ||
2033 (pInit->HostMfaHighAddr != high_addr) ||
2034 (pInit->SenseBufferHighAddr != sense_high)) {
2035 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2036 "IOC_INIT issued with 1 or more incorrect parameters. Rejected.\n",
2037 ioc->name, __FILE__, __LINE__);
2038 rc = -EFAULT;
2039 goto done_free_mem;
2040 }
2041 }
2042 break;
2043 default:
2044 /*
2045 * MPI_FUNCTION_PORT_ENABLE
2046 * MPI_FUNCTION_TARGET_CMD_BUFFER_POST
2047 * MPI_FUNCTION_TARGET_ASSIST
2048 * MPI_FUNCTION_TARGET_STATUS_SEND
2049 * MPI_FUNCTION_TARGET_MODE_ABORT
2050 * MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET
2051 * MPI_FUNCTION_IO_UNIT_RESET
2052 * MPI_FUNCTION_HANDSHAKE
2053 * MPI_FUNCTION_REPLY_FRAME_REMOVAL
2054 * MPI_FUNCTION_EVENT_NOTIFICATION
2055 * (driver handles event notification)
2056 * MPI_FUNCTION_EVENT_ACK
2057 */
2058
2059 /* What to do with these??? CHECK ME!!!
2060 MPI_FUNCTION_FC_LINK_SRVC_BUF_POST
2061 MPI_FUNCTION_FC_LINK_SRVC_RSP
2062 MPI_FUNCTION_FC_ABORT
2063 MPI_FUNCTION_LAN_SEND
2064 MPI_FUNCTION_LAN_RECEIVE
2065 MPI_FUNCTION_LAN_RESET
2066 */
2067
2068 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2069 "Illegal request (function 0x%x) \n",
2070 ioc->name, __FILE__, __LINE__, hdr->Function);
2071 rc = -EFAULT;
2072 goto done_free_mem;
2073 }
2074
2075 /* Add the SGL ( at most one data in SGE and one data out SGE )
2076 * In the case of two SGE's - the data out (write) will always
2077 * preceede the data in (read) SGE. psgList is used to free the
2078 * allocated memory.
2079 */
2080 psge = (char *) (((int *) mf) + karg.dataSgeOffset);
2081 flagsLength = 0;
2082
2083 if (karg.dataOutSize > 0)
2084 sgSize ++;
2085
2086 if (karg.dataInSize > 0)
2087 sgSize ++;
2088
2089 if (sgSize > 0) {
2090
2091 /* Set up the dataOut memory allocation */
2092 if (karg.dataOutSize > 0) {
2093 if (karg.dataInSize > 0) {
2094 flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT |
2095 MPI_SGE_FLAGS_END_OF_BUFFER |
2096 MPI_SGE_FLAGS_DIRECTION)
2097 << MPI_SGE_FLAGS_SHIFT;
2098 } else {
2099 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
2100 }
2101 flagsLength |= karg.dataOutSize;
2102 bufOut.len = karg.dataOutSize;
2103 bufOut.kptr = pci_alloc_consistent(
2104 ioc->pcidev, bufOut.len, &dma_addr_out);
2105
2106 if (bufOut.kptr == NULL) {
2107 rc = -ENOMEM;
2108 goto done_free_mem;
2109 } else {
2110 /* Set up this SGE.
2111 * Copy to MF and to sglbuf
2112 */
2113 ioc->add_sge(psge, flagsLength, dma_addr_out);
2114 psge += ioc->SGE_size;
2115
2116 /* Copy user data to kernel space.
2117 */
2118 if (copy_from_user(bufOut.kptr,
2119 karg.dataOutBufPtr,
2120 bufOut.len)) {
2121 printk(MYIOC_s_ERR_FMT
2122 "%s@%d::mptctl_do_mpt_command - Unable "
2123 "to read user data "
2124 "struct @ %p\n",
2125 ioc->name, __FILE__, __LINE__,karg.dataOutBufPtr);
2126 rc = -EFAULT;
2127 goto done_free_mem;
2128 }
2129 }
2130 }
2131
2132 if (karg.dataInSize > 0) {
2133 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
2134 flagsLength |= karg.dataInSize;
2135
2136 bufIn.len = karg.dataInSize;
2137 bufIn.kptr = pci_alloc_consistent(ioc->pcidev,
2138 bufIn.len, &dma_addr_in);
2139
2140 if (bufIn.kptr == NULL) {
2141 rc = -ENOMEM;
2142 goto done_free_mem;
2143 } else {
2144 /* Set up this SGE
2145 * Copy to MF and to sglbuf
2146 */
2147 ioc->add_sge(psge, flagsLength, dma_addr_in);
2148 }
2149 }
2150 } else {
2151 /* Add a NULL SGE
2152 */
2153 ioc->add_sge(psge, flagsLength, (dma_addr_t) -1);
2154 }
2155
2156 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, hdr->MsgContext);
2157 INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
2158 if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
2159
2160 mutex_lock(&ioc->taskmgmt_cmds.mutex);
2161 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
2162 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2163 goto done_free_mem;
2164 }
2165
2166 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
2167
2168 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
2169 (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
2170 mpt_put_msg_frame_hi_pri(mptctl_id, ioc, mf);
2171 else {
2172 rc =mpt_send_handshake_request(mptctl_id, ioc,
2173 sizeof(SCSITaskMgmt_t), (u32*)mf, CAN_SLEEP);
2174 if (rc != 0) {
2175 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2176 "send_handshake FAILED! (ioc %p, mf %p)\n",
2177 ioc->name, ioc, mf));
2178 mpt_clear_taskmgmt_in_progress_flag(ioc);
2179 rc = -ENODATA;
2180 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2181 goto done_free_mem;
2182 }
2183 }
2184
2185 } else
2186 mpt_put_msg_frame(mptctl_id, ioc, mf);
2187
2188 /* Now wait for the command to complete */
2189 timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT;
2190retry_wait:
2191 timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
2192 HZ*timeout);
2193 if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
2194 rc = -ETIME;
2195 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n",
2196 ioc->name, __func__));
2197 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
2198 if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
2199 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2200 goto done_free_mem;
2201 }
2202 if (!timeleft) {
2203 printk(MYIOC_s_WARN_FMT
2204 "mpt cmd timeout, doorbell=0x%08x"
2205 " function=0x%x\n",
2206 ioc->name, mpt_GetIocState(ioc, 0), function);
2207 if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
2208 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2209 mptctl_timeout_expired(ioc, mf);
2210 mf = NULL;
2211 } else
2212 goto retry_wait;
2213 goto done_free_mem;
2214 }
2215
2216 if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
2217 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
2218
2219
2220 mf = NULL;
2221
2222 /* If a valid reply frame, copy to the user.
2223 * Offset 2: reply length in U32's
2224 */
2225 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) {
2226 if (karg.maxReplyBytes < ioc->reply_sz) {
2227 sz = min(karg.maxReplyBytes,
2228 4*ioc->ioctl_cmds.reply[2]);
2229 } else {
2230 sz = min(ioc->reply_sz, 4*ioc->ioctl_cmds.reply[2]);
2231 }
2232 if (sz > 0) {
2233 if (copy_to_user(karg.replyFrameBufPtr,
2234 ioc->ioctl_cmds.reply, sz)){
2235 printk(MYIOC_s_ERR_FMT
2236 "%s@%d::mptctl_do_mpt_command - "
2237 "Unable to write out reply frame %p\n",
2238 ioc->name, __FILE__, __LINE__, karg.replyFrameBufPtr);
2239 rc = -ENODATA;
2240 goto done_free_mem;
2241 }
2242 }
2243 }
2244
2245 /* If valid sense data, copy to user.
2246 */
2247 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_SENSE_VALID) {
2248 sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE);
2249 if (sz > 0) {
2250 if (copy_to_user(karg.senseDataPtr,
2251 ioc->ioctl_cmds.sense, sz)) {
2252 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2253 "Unable to write sense data to user %p\n",
2254 ioc->name, __FILE__, __LINE__,
2255 karg.senseDataPtr);
2256 rc = -ENODATA;
2257 goto done_free_mem;
2258 }
2259 }
2260 }
2261
2262 /* If the overall status is _GOOD and data in, copy data
2263 * to user.
2264 */
2265 if ((ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD) &&
2266 (karg.dataInSize > 0) && (bufIn.kptr)) {
2267
2268 if (copy_to_user(karg.dataInBufPtr,
2269 bufIn.kptr, karg.dataInSize)) {
2270 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
2271 "Unable to write data to user %p\n",
2272 ioc->name, __FILE__, __LINE__,
2273 karg.dataInBufPtr);
2274 rc = -ENODATA;
2275 }
2276 }
2277
2278done_free_mem:
2279
2280 CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
2281 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
2282
2283 /* Free the allocated memory.
2284 */
2285 if (bufOut.kptr != NULL) {
2286 pci_free_consistent(ioc->pcidev,
2287 bufOut.len, (void *) bufOut.kptr, dma_addr_out);
2288 }
2289
2290 if (bufIn.kptr != NULL) {
2291 pci_free_consistent(ioc->pcidev,
2292 bufIn.len, (void *) bufIn.kptr, dma_addr_in);
2293 }
2294
2295 /* mf is null if command issued successfully
2296 * otherwise, failure occurred after mf acquired.
2297 */
2298 if (mf)
2299 mpt_free_msg_frame(ioc, mf);
2300
2301 return rc;
2302}
2303
2304/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2305/* Prototype Routine for the HOST INFO command.
2306 *
2307 * Outputs: None.
2308 * Return: 0 if successful
2309 * -EFAULT if data unavailable
2310 * -EBUSY if previous command timeout and IOC reset is not complete.
2311 * -ENODEV if no such device/adapter
2312 * -ETIME if timer expires
2313 * -ENOMEM if memory allocation error
2314 */
2315static int
2316mptctl_hp_hostinfo(MPT_ADAPTER *ioc, unsigned long arg, unsigned int data_size)
2317{
2318 hp_host_info_t __user *uarg = (void __user *) arg;
2319 struct pci_dev *pdev;
2320 char *pbuf=NULL;
2321 dma_addr_t buf_dma;
2322 hp_host_info_t karg;
2323 CONFIGPARMS cfg;
2324 ConfigPageHeader_t hdr;
2325 int rc, cim_rev;
2326 ToolboxIstwiReadWriteRequest_t *IstwiRWRequest;
2327 MPT_FRAME_HDR *mf = NULL;
2328 unsigned long timeleft;
2329 int retval;
2330 u32 msgcontext;
2331
2332 /* Reset long to int. Should affect IA64 and SPARC only
2333 */
2334 if (data_size == sizeof(hp_host_info_t))
2335 cim_rev = 1;
2336 else if (data_size == sizeof(hp_host_info_rev0_t))
2337 cim_rev = 0; /* obsolete */
2338 else
2339 return -EFAULT;
2340
2341 if (copy_from_user(&karg, uarg, sizeof(hp_host_info_t))) {
2342 printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_host_info - "
2343 "Unable to read in hp_host_info struct @ %p\n",
2344 __FILE__, __LINE__, uarg);
2345 return -EFAULT;
2346 }
2347
2348 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": mptctl_hp_hostinfo called.\n",
2349 ioc->name));
2350
2351 /* Fill in the data and return the structure to the calling
2352 * program
2353 */
2354 pdev = (struct pci_dev *) ioc->pcidev;
2355
2356 karg.vendor = pdev->vendor;
2357 karg.device = pdev->device;
2358 karg.subsystem_id = pdev->subsystem_device;
2359 karg.subsystem_vendor = pdev->subsystem_vendor;
2360 karg.devfn = pdev->devfn;
2361 karg.bus = pdev->bus->number;
2362
2363 /* Save the SCSI host no. if
2364 * SCSI driver loaded
2365 */
2366 if (ioc->sh != NULL)
2367 karg.host_no = ioc->sh->host_no;
2368 else
2369 karg.host_no = -1;
2370
2371 /* Reformat the fw_version into a string */
2372 snprintf(karg.fw_version, sizeof(karg.fw_version),
2373 "%.2hhu.%.2hhu.%.2hhu.%.2hhu",
2374 ioc->facts.FWVersion.Struct.Major,
2375 ioc->facts.FWVersion.Struct.Minor,
2376 ioc->facts.FWVersion.Struct.Unit,
2377 ioc->facts.FWVersion.Struct.Dev);
2378
2379 /* Issue a config request to get the device serial number
2380 */
2381 hdr.PageVersion = 0;
2382 hdr.PageLength = 0;
2383 hdr.PageNumber = 0;
2384 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
2385 cfg.cfghdr.hdr = &hdr;
2386 cfg.physAddr = -1;
2387 cfg.pageAddr = 0;
2388 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
2389 cfg.dir = 0; /* read */
2390 cfg.timeout = 10;
2391
2392 strncpy(karg.serial_number, " ", 24);
2393 if (mpt_config(ioc, &cfg) == 0) {
2394 if (cfg.cfghdr.hdr->PageLength > 0) {
2395 /* Issue the second config page request */
2396 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
2397
2398 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
2399 if (pbuf) {
2400 cfg.physAddr = buf_dma;
2401 if (mpt_config(ioc, &cfg) == 0) {
2402 ManufacturingPage0_t *pdata = (ManufacturingPage0_t *) pbuf;
2403 if (strlen(pdata->BoardTracerNumber) > 1) {
2404 strlcpy(karg.serial_number,
2405 pdata->BoardTracerNumber, 24);
2406 }
2407 }
2408 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
2409 pbuf = NULL;
2410 }
2411 }
2412 }
2413 rc = mpt_GetIocState(ioc, 1);
2414 switch (rc) {
2415 case MPI_IOC_STATE_OPERATIONAL:
2416 karg.ioc_status = HP_STATUS_OK;
2417 break;
2418
2419 case MPI_IOC_STATE_FAULT:
2420 karg.ioc_status = HP_STATUS_FAILED;
2421 break;
2422
2423 case MPI_IOC_STATE_RESET:
2424 case MPI_IOC_STATE_READY:
2425 default:
2426 karg.ioc_status = HP_STATUS_OTHER;
2427 break;
2428 }
2429
2430 karg.base_io_addr = pci_resource_start(pdev, 0);
2431
2432 if ((ioc->bus_type == SAS) || (ioc->bus_type == FC))
2433 karg.bus_phys_width = HP_BUS_WIDTH_UNK;
2434 else
2435 karg.bus_phys_width = HP_BUS_WIDTH_16;
2436
2437 karg.hard_resets = 0;
2438 karg.soft_resets = 0;
2439 karg.timeouts = 0;
2440 if (ioc->sh != NULL) {
2441 MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
2442
2443 if (hd && (cim_rev == 1)) {
2444 karg.hard_resets = ioc->hard_resets;
2445 karg.soft_resets = ioc->soft_resets;
2446 karg.timeouts = ioc->timeouts;
2447 }
2448 }
2449
2450 /*
2451 * Gather ISTWI(Industry Standard Two Wire Interface) Data
2452 */
2453 if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
2454 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
2455 "%s, no msg frames!!\n", ioc->name, __func__));
2456 goto out;
2457 }
2458
2459 IstwiRWRequest = (ToolboxIstwiReadWriteRequest_t *)mf;
2460 msgcontext = IstwiRWRequest->MsgContext;
2461 memset(IstwiRWRequest,0,sizeof(ToolboxIstwiReadWriteRequest_t));
2462 IstwiRWRequest->MsgContext = msgcontext;
2463 IstwiRWRequest->Function = MPI_FUNCTION_TOOLBOX;
2464 IstwiRWRequest->Tool = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL;
2465 IstwiRWRequest->Flags = MPI_TB_ISTWI_FLAGS_READ;
2466 IstwiRWRequest->NumAddressBytes = 0x01;
2467 IstwiRWRequest->DataLength = cpu_to_le16(0x04);
2468 if (pdev->devfn & 1)
2469 IstwiRWRequest->DeviceAddr = 0xB2;
2470 else
2471 IstwiRWRequest->DeviceAddr = 0xB0;
2472
2473 pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
2474 if (!pbuf)
2475 goto out;
2476 ioc->add_sge((char *)&IstwiRWRequest->SGL,
2477 (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma);
2478
2479 retval = 0;
2480 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context,
2481 IstwiRWRequest->MsgContext);
2482 INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
2483 mpt_put_msg_frame(mptctl_id, ioc, mf);
2484
2485retry_wait:
2486 timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
2487 HZ*MPT_IOCTL_DEFAULT_TIMEOUT);
2488 if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
2489 retval = -ETIME;
2490 printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__);
2491 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
2492 mpt_free_msg_frame(ioc, mf);
2493 goto out;
2494 }
2495 if (!timeleft) {
2496 printk(MYIOC_s_WARN_FMT
2497 "HOST INFO command timeout, doorbell=0x%08x\n",
2498 ioc->name, mpt_GetIocState(ioc, 0));
2499 mptctl_timeout_expired(ioc, mf);
2500 } else
2501 goto retry_wait;
2502 goto out;
2503 }
2504
2505 /*
2506 *ISTWI Data Definition
2507 * pbuf[0] = FW_VERSION = 0x4
2508 * pbuf[1] = Bay Count = 6 or 4 or 2, depending on
2509 * the config, you should be seeing one out of these three values
2510 * pbuf[2] = Drive Installed Map = bit pattern depend on which
2511 * bays have drives in them
2512 * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3)
2513 */
2514 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)
2515 karg.rsvd = *(u32 *)pbuf;
2516
2517 out:
2518 CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
2519 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
2520
2521 if (pbuf)
2522 pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
2523
2524 /* Copy the data from kernel memory to user memory
2525 */
2526 if (copy_to_user((char __user *)arg, &karg, sizeof(hp_host_info_t))) {
2527 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hpgethostinfo - "
2528 "Unable to write out hp_host_info @ %p\n",
2529 ioc->name, __FILE__, __LINE__, uarg);
2530 return -EFAULT;
2531 }
2532
2533 return 0;
2534
2535}
2536
2537/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2538/* Prototype Routine for the TARGET INFO command.
2539 *
2540 * Outputs: None.
2541 * Return: 0 if successful
2542 * -EFAULT if data unavailable
2543 * -EBUSY if previous command timeout and IOC reset is not complete.
2544 * -ENODEV if no such device/adapter
2545 * -ETIME if timer expires
2546 * -ENOMEM if memory allocation error
2547 */
2548static int
2549mptctl_hp_targetinfo(MPT_ADAPTER *ioc, unsigned long arg)
2550{
2551 hp_target_info_t __user *uarg = (void __user *) arg;
2552 SCSIDevicePage0_t *pg0_alloc;
2553 SCSIDevicePage3_t *pg3_alloc;
2554 MPT_SCSI_HOST *hd = NULL;
2555 hp_target_info_t karg;
2556 int data_sz;
2557 dma_addr_t page_dma;
2558 CONFIGPARMS cfg;
2559 ConfigPageHeader_t hdr;
2560 int tmp, np, rc = 0;
2561
2562 if (copy_from_user(&karg, uarg, sizeof(hp_target_info_t))) {
2563 printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_targetinfo - "
2564 "Unable to read in hp_host_targetinfo struct @ %p\n",
2565 __FILE__, __LINE__, uarg);
2566 return -EFAULT;
2567 }
2568
2569 if (karg.hdr.id >= MPT_MAX_FC_DEVICES)
2570 return -EINVAL;
2571 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n",
2572 ioc->name));
2573
2574 /* There is nothing to do for FCP parts.
2575 */
2576 if ((ioc->bus_type == SAS) || (ioc->bus_type == FC))
2577 return 0;
2578
2579 if ((ioc->spi_data.sdp0length == 0) || (ioc->sh == NULL))
2580 return 0;
2581
2582 if (ioc->sh->host_no != karg.hdr.host)
2583 return -ENODEV;
2584
2585 /* Get the data transfer speeds
2586 */
2587 data_sz = ioc->spi_data.sdp0length * 4;
2588 pg0_alloc = pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
2589 if (pg0_alloc) {
2590 hdr.PageVersion = ioc->spi_data.sdp0version;
2591 hdr.PageLength = data_sz;
2592 hdr.PageNumber = 0;
2593 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
2594
2595 cfg.cfghdr.hdr = &hdr;
2596 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
2597 cfg.dir = 0;
2598 cfg.timeout = 0;
2599 cfg.physAddr = page_dma;
2600
2601 cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id;
2602
2603 if ((rc = mpt_config(ioc, &cfg)) == 0) {
2604 np = le32_to_cpu(pg0_alloc->NegotiatedParameters);
2605 karg.negotiated_width = np & MPI_SCSIDEVPAGE0_NP_WIDE ?
2606 HP_BUS_WIDTH_16 : HP_BUS_WIDTH_8;
2607
2608 if (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) {
2609 tmp = (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
2610 if (tmp < 0x09)
2611 karg.negotiated_speed = HP_DEV_SPEED_ULTRA320;
2612 else if (tmp <= 0x09)
2613 karg.negotiated_speed = HP_DEV_SPEED_ULTRA160;
2614 else if (tmp <= 0x0A)
2615 karg.negotiated_speed = HP_DEV_SPEED_ULTRA2;
2616 else if (tmp <= 0x0C)
2617 karg.negotiated_speed = HP_DEV_SPEED_ULTRA;
2618 else if (tmp <= 0x25)
2619 karg.negotiated_speed = HP_DEV_SPEED_FAST;
2620 else
2621 karg.negotiated_speed = HP_DEV_SPEED_ASYNC;
2622 } else
2623 karg.negotiated_speed = HP_DEV_SPEED_ASYNC;
2624 }
2625
2626 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg0_alloc, page_dma);
2627 }
2628
2629 /* Set defaults
2630 */
2631 karg.message_rejects = -1;
2632 karg.phase_errors = -1;
2633 karg.parity_errors = -1;
2634 karg.select_timeouts = -1;
2635
2636 /* Get the target error parameters
2637 */
2638 hdr.PageVersion = 0;
2639 hdr.PageLength = 0;
2640 hdr.PageNumber = 3;
2641 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
2642
2643 cfg.cfghdr.hdr = &hdr;
2644 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
2645 cfg.dir = 0;
2646 cfg.timeout = 0;
2647 cfg.physAddr = -1;
2648 if ((mpt_config(ioc, &cfg) == 0) && (cfg.cfghdr.hdr->PageLength > 0)) {
2649 /* Issue the second config page request */
2650 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
2651 data_sz = (int) cfg.cfghdr.hdr->PageLength * 4;
2652 pg3_alloc = pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
2653 if (pg3_alloc) {
2654 cfg.physAddr = page_dma;
2655 cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id;
2656 if ((rc = mpt_config(ioc, &cfg)) == 0) {
2657 karg.message_rejects = (u32) le16_to_cpu(pg3_alloc->MsgRejectCount);
2658 karg.phase_errors = (u32) le16_to_cpu(pg3_alloc->PhaseErrorCount);
2659 karg.parity_errors = (u32) le16_to_cpu(pg3_alloc->ParityErrorCount);
2660 }
2661 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg3_alloc, page_dma);
2662 }
2663 }
2664 hd = shost_priv(ioc->sh);
2665 if (hd != NULL)
2666 karg.select_timeouts = hd->sel_timeout[karg.hdr.id];
2667
2668 /* Copy the data from kernel memory to user memory
2669 */
2670 if (copy_to_user((char __user *)arg, &karg, sizeof(hp_target_info_t))) {
2671 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hp_target_info - "
2672 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n",
2673 ioc->name, __FILE__, __LINE__, uarg);
2674 return -EFAULT;
2675 }
2676
2677 return 0;
2678}
2679
2680/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2681
2682static const struct file_operations mptctl_fops = {
2683 .owner = THIS_MODULE,
2684 .llseek = no_llseek,
2685 .fasync = mptctl_fasync,
2686 .unlocked_ioctl = mptctl_ioctl,
2687#ifdef CONFIG_COMPAT
2688 .compat_ioctl = compat_mpctl_ioctl,
2689#endif
2690};
2691
2692static struct miscdevice mptctl_miscdev = {
2693 MPT_MINOR,
2694 MYNAM,
2695 &mptctl_fops
2696};
2697
2698/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2699
2700#ifdef CONFIG_COMPAT
2701
2702static int
2703compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd,
2704 unsigned long arg)
2705{
2706 struct mpt_fw_xfer32 kfw32;
2707 struct mpt_fw_xfer kfw;
2708 MPT_ADAPTER *iocp = NULL;
2709 int iocnum, iocnumX;
2710 int nonblock = (filp->f_flags & O_NONBLOCK);
2711 int ret;
2712
2713
2714 if (copy_from_user(&kfw32, (char __user *)arg, sizeof(kfw32)))
2715 return -EFAULT;
2716
2717 /* Verify intended MPT adapter */
2718 iocnumX = kfw32.iocnum & 0xFF;
2719 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
2720 (iocp == NULL)) {
2721 printk(KERN_DEBUG MYNAM "::compat_mptfwxfer_ioctl @%d - ioc%d not found!\n",
2722 __LINE__, iocnumX);
2723 return -ENODEV;
2724 }
2725
2726 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
2727 return ret;
2728
2729 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mptfwxfer_ioctl() called\n",
2730 iocp->name));
2731 kfw.iocnum = iocnum;
2732 kfw.fwlen = kfw32.fwlen;
2733 kfw.bufp = compat_ptr(kfw32.bufp);
2734
2735 ret = mptctl_do_fw_download(iocp, kfw.bufp, kfw.fwlen);
2736
2737 mutex_unlock(&iocp->ioctl_cmds.mutex);
2738
2739 return ret;
2740}
2741
2742static int
2743compat_mpt_command(struct file *filp, unsigned int cmd,
2744 unsigned long arg)
2745{
2746 struct mpt_ioctl_command32 karg32;
2747 struct mpt_ioctl_command32 __user *uarg = (struct mpt_ioctl_command32 __user *) arg;
2748 struct mpt_ioctl_command karg;
2749 MPT_ADAPTER *iocp = NULL;
2750 int iocnum, iocnumX;
2751 int nonblock = (filp->f_flags & O_NONBLOCK);
2752 int ret;
2753
2754 if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32)))
2755 return -EFAULT;
2756
2757 /* Verify intended MPT adapter */
2758 iocnumX = karg32.hdr.iocnum & 0xFF;
2759 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
2760 (iocp == NULL)) {
2761 printk(KERN_DEBUG MYNAM "::compat_mpt_command @%d - ioc%d not found!\n",
2762 __LINE__, iocnumX);
2763 return -ENODEV;
2764 }
2765
2766 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0)
2767 return ret;
2768
2769 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mpt_command() called\n",
2770 iocp->name));
2771 /* Copy data to karg */
2772 karg.hdr.iocnum = karg32.hdr.iocnum;
2773 karg.hdr.port = karg32.hdr.port;
2774 karg.timeout = karg32.timeout;
2775 karg.maxReplyBytes = karg32.maxReplyBytes;
2776
2777 karg.dataInSize = karg32.dataInSize;
2778 karg.dataOutSize = karg32.dataOutSize;
2779 karg.maxSenseBytes = karg32.maxSenseBytes;
2780 karg.dataSgeOffset = karg32.dataSgeOffset;
2781
2782 karg.replyFrameBufPtr = (char __user *)(unsigned long)karg32.replyFrameBufPtr;
2783 karg.dataInBufPtr = (char __user *)(unsigned long)karg32.dataInBufPtr;
2784 karg.dataOutBufPtr = (char __user *)(unsigned long)karg32.dataOutBufPtr;
2785 karg.senseDataPtr = (char __user *)(unsigned long)karg32.senseDataPtr;
2786
2787 /* Pass new structure to do_mpt_command
2788 */
2789 ret = mptctl_do_mpt_command (iocp, karg, &uarg->MF);
2790
2791 mutex_unlock(&iocp->ioctl_cmds.mutex);
2792
2793 return ret;
2794}
2795
2796static long compat_mpctl_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
2797{
2798 long ret;
2799 mutex_lock(&mpctl_mutex);
2800 switch (cmd) {
2801 case MPTIOCINFO:
2802 case MPTIOCINFO1:
2803 case MPTIOCINFO2:
2804 case MPTTARGETINFO:
2805 case MPTEVENTQUERY:
2806 case MPTEVENTENABLE:
2807 case MPTEVENTREPORT:
2808 case MPTHARDRESET:
2809 case HP_GETHOSTINFO:
2810 case HP_GETTARGETINFO:
2811 case MPTTEST:
2812 ret = __mptctl_ioctl(f, cmd, arg);
2813 break;
2814 case MPTCOMMAND32:
2815 ret = compat_mpt_command(f, cmd, arg);
2816 break;
2817 case MPTFWDOWNLOAD32:
2818 ret = compat_mptfwxfer_ioctl(f, cmd, arg);
2819 break;
2820 default:
2821 ret = -ENOIOCTLCMD;
2822 break;
2823 }
2824 mutex_unlock(&mpctl_mutex);
2825 return ret;
2826}
2827
2828#endif
2829
2830
2831/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2832/*
2833 * mptctl_probe - Installs ioctl devices per bus.
2834 * @pdev: Pointer to pci_dev structure
2835 *
2836 * Returns 0 for success, non-zero for failure.
2837 *
2838 */
2839
2840static int
2841mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
2842{
2843 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2844
2845 mutex_init(&ioc->ioctl_cmds.mutex);
2846 init_completion(&ioc->ioctl_cmds.done);
2847 return 0;
2848}
2849
2850/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2851/*
2852 * mptctl_remove - Removed ioctl devices
2853 * @pdev: Pointer to pci_dev structure
2854 *
2855 *
2856 */
2857static void
2858mptctl_remove(struct pci_dev *pdev)
2859{
2860}
2861
2862static struct mpt_pci_driver mptctl_driver = {
2863 .probe = mptctl_probe,
2864 .remove = mptctl_remove,
2865};
2866
2867/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2868static int __init mptctl_init(void)
2869{
2870 int err;
2871 int where = 1;
2872
2873 show_mptmod_ver(my_NAME, my_VERSION);
2874
2875 mpt_device_driver_register(&mptctl_driver, MPTCTL_DRIVER);
2876
2877 /* Register this device */
2878 err = misc_register(&mptctl_miscdev);
2879 if (err < 0) {
2880 printk(KERN_ERR MYNAM ": Can't register misc device [minor=%d].\n", MPT_MINOR);
2881 goto out_fail;
2882 }
2883 printk(KERN_INFO MYNAM ": Registered with Fusion MPT base driver\n");
2884 printk(KERN_INFO MYNAM ": /dev/%s @ (major,minor=%d,%d)\n",
2885 mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor);
2886
2887 /*
2888 * Install our handler
2889 */
2890 ++where;
2891 mptctl_id = mpt_register(mptctl_reply, MPTCTL_DRIVER,
2892 "mptctl_reply");
2893 if (!mptctl_id || mptctl_id >= MPT_MAX_PROTOCOL_DRIVERS) {
2894 printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n");
2895 misc_deregister(&mptctl_miscdev);
2896 err = -EBUSY;
2897 goto out_fail;
2898 }
2899
2900 mptctl_taskmgmt_id = mpt_register(mptctl_taskmgmt_reply, MPTCTL_DRIVER,
2901 "mptctl_taskmgmt_reply");
2902 if (!mptctl_taskmgmt_id || mptctl_taskmgmt_id >= MPT_MAX_PROTOCOL_DRIVERS) {
2903 printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n");
2904 mpt_deregister(mptctl_id);
2905 misc_deregister(&mptctl_miscdev);
2906 err = -EBUSY;
2907 goto out_fail;
2908 }
2909
2910 mpt_reset_register(mptctl_id, mptctl_ioc_reset);
2911 mpt_event_register(mptctl_id, mptctl_event_process);
2912
2913 return 0;
2914
2915out_fail:
2916
2917 mpt_device_driver_deregister(MPTCTL_DRIVER);
2918
2919 return err;
2920}
2921
2922/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2923static void mptctl_exit(void)
2924{
2925 misc_deregister(&mptctl_miscdev);
2926 printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n",
2927 mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor);
2928
2929 /* De-register event handler from base module */
2930 mpt_event_deregister(mptctl_id);
2931
2932 /* De-register reset handler from base module */
2933 mpt_reset_deregister(mptctl_id);
2934
2935 /* De-register callback handler from base module */
2936 mpt_deregister(mptctl_taskmgmt_id);
2937 mpt_deregister(mptctl_id);
2938
2939 mpt_device_driver_deregister(MPTCTL_DRIVER);
2940
2941}
2942
2943/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2944
2945module_init(mptctl_init);
2946module_exit(mptctl_exit);