Loading...
Note: File does not exist in v4.6.
1/*
2 * Copyright © 2013 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
22 *
23 * Author: Jani Nikula <jani.nikula@intel.com>
24 */
25
26#include <linux/slab.h>
27
28#include <drm/drm_atomic_helper.h>
29#include <drm/drm_crtc.h>
30#include <drm/drm_edid.h>
31#include <drm/drm_mipi_dsi.h>
32
33#include "i915_drv.h"
34#include "intel_atomic.h"
35#include "intel_connector.h"
36#include "intel_crtc.h"
37#include "intel_de.h"
38#include "intel_display_types.h"
39#include "intel_dsi.h"
40#include "intel_fifo_underrun.h"
41#include "intel_panel.h"
42#include "intel_sideband.h"
43#include "skl_scaler.h"
44
45/* return pixels in terms of txbyteclkhs */
46static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
47 u16 burst_mode_ratio)
48{
49 return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
50 8 * 100), lane_count);
51}
52
53/* return pixels equvalent to txbyteclkhs */
54static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count,
55 u16 burst_mode_ratio)
56{
57 return DIV_ROUND_UP((clk_hs * lane_count * 8 * 100),
58 (bpp * burst_mode_ratio));
59}
60
61enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt)
62{
63 /* It just so happens the VBT matches register contents. */
64 switch (fmt) {
65 case VID_MODE_FORMAT_RGB888:
66 return MIPI_DSI_FMT_RGB888;
67 case VID_MODE_FORMAT_RGB666:
68 return MIPI_DSI_FMT_RGB666;
69 case VID_MODE_FORMAT_RGB666_PACKED:
70 return MIPI_DSI_FMT_RGB666_PACKED;
71 case VID_MODE_FORMAT_RGB565:
72 return MIPI_DSI_FMT_RGB565;
73 default:
74 MISSING_CASE(fmt);
75 return MIPI_DSI_FMT_RGB666;
76 }
77}
78
79void vlv_dsi_wait_for_fifo_empty(struct intel_dsi *intel_dsi, enum port port)
80{
81 struct drm_encoder *encoder = &intel_dsi->base.base;
82 struct drm_device *dev = encoder->dev;
83 struct drm_i915_private *dev_priv = to_i915(dev);
84 u32 mask;
85
86 mask = LP_CTRL_FIFO_EMPTY | HS_CTRL_FIFO_EMPTY |
87 LP_DATA_FIFO_EMPTY | HS_DATA_FIFO_EMPTY;
88
89 if (intel_de_wait_for_set(dev_priv, MIPI_GEN_FIFO_STAT(port),
90 mask, 100))
91 drm_err(&dev_priv->drm, "DPI FIFOs are not empty\n");
92}
93
94static void write_data(struct drm_i915_private *dev_priv,
95 i915_reg_t reg,
96 const u8 *data, u32 len)
97{
98 u32 i, j;
99
100 for (i = 0; i < len; i += 4) {
101 u32 val = 0;
102
103 for (j = 0; j < min_t(u32, len - i, 4); j++)
104 val |= *data++ << 8 * j;
105
106 intel_de_write(dev_priv, reg, val);
107 }
108}
109
110static void read_data(struct drm_i915_private *dev_priv,
111 i915_reg_t reg,
112 u8 *data, u32 len)
113{
114 u32 i, j;
115
116 for (i = 0; i < len; i += 4) {
117 u32 val = intel_de_read(dev_priv, reg);
118
119 for (j = 0; j < min_t(u32, len - i, 4); j++)
120 *data++ = val >> 8 * j;
121 }
122}
123
124static ssize_t intel_dsi_host_transfer(struct mipi_dsi_host *host,
125 const struct mipi_dsi_msg *msg)
126{
127 struct intel_dsi_host *intel_dsi_host = to_intel_dsi_host(host);
128 struct drm_device *dev = intel_dsi_host->intel_dsi->base.base.dev;
129 struct drm_i915_private *dev_priv = to_i915(dev);
130 enum port port = intel_dsi_host->port;
131 struct mipi_dsi_packet packet;
132 ssize_t ret;
133 const u8 *header, *data;
134 i915_reg_t data_reg, ctrl_reg;
135 u32 data_mask, ctrl_mask;
136
137 ret = mipi_dsi_create_packet(&packet, msg);
138 if (ret < 0)
139 return ret;
140
141 header = packet.header;
142 data = packet.payload;
143
144 if (msg->flags & MIPI_DSI_MSG_USE_LPM) {
145 data_reg = MIPI_LP_GEN_DATA(port);
146 data_mask = LP_DATA_FIFO_FULL;
147 ctrl_reg = MIPI_LP_GEN_CTRL(port);
148 ctrl_mask = LP_CTRL_FIFO_FULL;
149 } else {
150 data_reg = MIPI_HS_GEN_DATA(port);
151 data_mask = HS_DATA_FIFO_FULL;
152 ctrl_reg = MIPI_HS_GEN_CTRL(port);
153 ctrl_mask = HS_CTRL_FIFO_FULL;
154 }
155
156 /* note: this is never true for reads */
157 if (packet.payload_length) {
158 if (intel_de_wait_for_clear(dev_priv, MIPI_GEN_FIFO_STAT(port),
159 data_mask, 50))
160 drm_err(&dev_priv->drm,
161 "Timeout waiting for HS/LP DATA FIFO !full\n");
162
163 write_data(dev_priv, data_reg, packet.payload,
164 packet.payload_length);
165 }
166
167 if (msg->rx_len) {
168 intel_de_write(dev_priv, MIPI_INTR_STAT(port),
169 GEN_READ_DATA_AVAIL);
170 }
171
172 if (intel_de_wait_for_clear(dev_priv, MIPI_GEN_FIFO_STAT(port),
173 ctrl_mask, 50)) {
174 drm_err(&dev_priv->drm,
175 "Timeout waiting for HS/LP CTRL FIFO !full\n");
176 }
177
178 intel_de_write(dev_priv, ctrl_reg,
179 header[2] << 16 | header[1] << 8 | header[0]);
180
181 /* ->rx_len is set only for reads */
182 if (msg->rx_len) {
183 data_mask = GEN_READ_DATA_AVAIL;
184 if (intel_de_wait_for_set(dev_priv, MIPI_INTR_STAT(port),
185 data_mask, 50))
186 drm_err(&dev_priv->drm,
187 "Timeout waiting for read data.\n");
188
189 read_data(dev_priv, data_reg, msg->rx_buf, msg->rx_len);
190 }
191
192 /* XXX: fix for reads and writes */
193 return 4 + packet.payload_length;
194}
195
196static int intel_dsi_host_attach(struct mipi_dsi_host *host,
197 struct mipi_dsi_device *dsi)
198{
199 return 0;
200}
201
202static int intel_dsi_host_detach(struct mipi_dsi_host *host,
203 struct mipi_dsi_device *dsi)
204{
205 return 0;
206}
207
208static const struct mipi_dsi_host_ops intel_dsi_host_ops = {
209 .attach = intel_dsi_host_attach,
210 .detach = intel_dsi_host_detach,
211 .transfer = intel_dsi_host_transfer,
212};
213
214/*
215 * send a video mode command
216 *
217 * XXX: commands with data in MIPI_DPI_DATA?
218 */
219static int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs,
220 enum port port)
221{
222 struct drm_encoder *encoder = &intel_dsi->base.base;
223 struct drm_device *dev = encoder->dev;
224 struct drm_i915_private *dev_priv = to_i915(dev);
225 u32 mask;
226
227 /* XXX: pipe, hs */
228 if (hs)
229 cmd &= ~DPI_LP_MODE;
230 else
231 cmd |= DPI_LP_MODE;
232
233 /* clear bit */
234 intel_de_write(dev_priv, MIPI_INTR_STAT(port), SPL_PKT_SENT_INTERRUPT);
235
236 /* XXX: old code skips write if control unchanged */
237 if (cmd == intel_de_read(dev_priv, MIPI_DPI_CONTROL(port)))
238 drm_dbg_kms(&dev_priv->drm,
239 "Same special packet %02x twice in a row.\n", cmd);
240
241 intel_de_write(dev_priv, MIPI_DPI_CONTROL(port), cmd);
242
243 mask = SPL_PKT_SENT_INTERRUPT;
244 if (intel_de_wait_for_set(dev_priv, MIPI_INTR_STAT(port), mask, 100))
245 drm_err(&dev_priv->drm,
246 "Video mode command 0x%08x send failed.\n", cmd);
247
248 return 0;
249}
250
251static void band_gap_reset(struct drm_i915_private *dev_priv)
252{
253 vlv_flisdsi_get(dev_priv);
254
255 vlv_flisdsi_write(dev_priv, 0x08, 0x0001);
256 vlv_flisdsi_write(dev_priv, 0x0F, 0x0005);
257 vlv_flisdsi_write(dev_priv, 0x0F, 0x0025);
258 udelay(150);
259 vlv_flisdsi_write(dev_priv, 0x0F, 0x0000);
260 vlv_flisdsi_write(dev_priv, 0x08, 0x0000);
261
262 vlv_flisdsi_put(dev_priv);
263}
264
265static int intel_dsi_compute_config(struct intel_encoder *encoder,
266 struct intel_crtc_state *pipe_config,
267 struct drm_connector_state *conn_state)
268{
269 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
270 struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
271 base);
272 struct intel_connector *intel_connector = intel_dsi->attached_connector;
273 const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
274 struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
275 int ret;
276
277 drm_dbg_kms(&dev_priv->drm, "\n");
278 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
279
280 if (fixed_mode) {
281 intel_fixed_panel_mode(fixed_mode, adjusted_mode);
282
283 if (HAS_GMCH(dev_priv))
284 ret = intel_gmch_panel_fitting(pipe_config, conn_state);
285 else
286 ret = intel_pch_panel_fitting(pipe_config, conn_state);
287 if (ret)
288 return ret;
289 }
290
291 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
292 return -EINVAL;
293
294 /* DSI uses short packets for sync events, so clear mode flags for DSI */
295 adjusted_mode->flags = 0;
296
297 if (intel_dsi->pixel_format == MIPI_DSI_FMT_RGB888)
298 pipe_config->pipe_bpp = 24;
299 else
300 pipe_config->pipe_bpp = 18;
301
302 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
303 /* Enable Frame time stamp based scanline reporting */
304 pipe_config->mode_flags |=
305 I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP;
306
307 /* Dual link goes to DSI transcoder A. */
308 if (intel_dsi->ports == BIT(PORT_C))
309 pipe_config->cpu_transcoder = TRANSCODER_DSI_C;
310 else
311 pipe_config->cpu_transcoder = TRANSCODER_DSI_A;
312
313 ret = bxt_dsi_pll_compute(encoder, pipe_config);
314 if (ret)
315 return -EINVAL;
316 } else {
317 ret = vlv_dsi_pll_compute(encoder, pipe_config);
318 if (ret)
319 return -EINVAL;
320 }
321
322 pipe_config->clock_set = true;
323
324 return 0;
325}
326
327static bool glk_dsi_enable_io(struct intel_encoder *encoder)
328{
329 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
330 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
331 enum port port;
332 u32 tmp;
333 bool cold_boot = false;
334
335 /* Set the MIPI mode
336 * If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting.
337 * Power ON MIPI IO first and then write into IO reset and LP wake bits
338 */
339 for_each_dsi_port(port, intel_dsi->ports) {
340 tmp = intel_de_read(dev_priv, MIPI_CTRL(port));
341 intel_de_write(dev_priv, MIPI_CTRL(port),
342 tmp | GLK_MIPIIO_ENABLE);
343 }
344
345 /* Put the IO into reset */
346 tmp = intel_de_read(dev_priv, MIPI_CTRL(PORT_A));
347 tmp &= ~GLK_MIPIIO_RESET_RELEASED;
348 intel_de_write(dev_priv, MIPI_CTRL(PORT_A), tmp);
349
350 /* Program LP Wake */
351 for_each_dsi_port(port, intel_dsi->ports) {
352 tmp = intel_de_read(dev_priv, MIPI_CTRL(port));
353 if (!(intel_de_read(dev_priv, MIPI_DEVICE_READY(port)) & DEVICE_READY))
354 tmp &= ~GLK_LP_WAKE;
355 else
356 tmp |= GLK_LP_WAKE;
357 intel_de_write(dev_priv, MIPI_CTRL(port), tmp);
358 }
359
360 /* Wait for Pwr ACK */
361 for_each_dsi_port(port, intel_dsi->ports) {
362 if (intel_de_wait_for_set(dev_priv, MIPI_CTRL(port),
363 GLK_MIPIIO_PORT_POWERED, 20))
364 drm_err(&dev_priv->drm, "MIPIO port is powergated\n");
365 }
366
367 /* Check for cold boot scenario */
368 for_each_dsi_port(port, intel_dsi->ports) {
369 cold_boot |=
370 !(intel_de_read(dev_priv, MIPI_DEVICE_READY(port)) & DEVICE_READY);
371 }
372
373 return cold_boot;
374}
375
376static void glk_dsi_device_ready(struct intel_encoder *encoder)
377{
378 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
379 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
380 enum port port;
381 u32 val;
382
383 /* Wait for MIPI PHY status bit to set */
384 for_each_dsi_port(port, intel_dsi->ports) {
385 if (intel_de_wait_for_set(dev_priv, MIPI_CTRL(port),
386 GLK_PHY_STATUS_PORT_READY, 20))
387 drm_err(&dev_priv->drm, "PHY is not ON\n");
388 }
389
390 /* Get IO out of reset */
391 val = intel_de_read(dev_priv, MIPI_CTRL(PORT_A));
392 intel_de_write(dev_priv, MIPI_CTRL(PORT_A),
393 val | GLK_MIPIIO_RESET_RELEASED);
394
395 /* Get IO out of Low power state*/
396 for_each_dsi_port(port, intel_dsi->ports) {
397 if (!(intel_de_read(dev_priv, MIPI_DEVICE_READY(port)) & DEVICE_READY)) {
398 val = intel_de_read(dev_priv, MIPI_DEVICE_READY(port));
399 val &= ~ULPS_STATE_MASK;
400 val |= DEVICE_READY;
401 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), val);
402 usleep_range(10, 15);
403 } else {
404 /* Enter ULPS */
405 val = intel_de_read(dev_priv, MIPI_DEVICE_READY(port));
406 val &= ~ULPS_STATE_MASK;
407 val |= (ULPS_STATE_ENTER | DEVICE_READY);
408 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), val);
409
410 /* Wait for ULPS active */
411 if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
412 GLK_ULPS_NOT_ACTIVE, 20))
413 drm_err(&dev_priv->drm, "ULPS not active\n");
414
415 /* Exit ULPS */
416 val = intel_de_read(dev_priv, MIPI_DEVICE_READY(port));
417 val &= ~ULPS_STATE_MASK;
418 val |= (ULPS_STATE_EXIT | DEVICE_READY);
419 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), val);
420
421 /* Enter Normal Mode */
422 val = intel_de_read(dev_priv, MIPI_DEVICE_READY(port));
423 val &= ~ULPS_STATE_MASK;
424 val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
425 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), val);
426
427 val = intel_de_read(dev_priv, MIPI_CTRL(port));
428 val &= ~GLK_LP_WAKE;
429 intel_de_write(dev_priv, MIPI_CTRL(port), val);
430 }
431 }
432
433 /* Wait for Stop state */
434 for_each_dsi_port(port, intel_dsi->ports) {
435 if (intel_de_wait_for_set(dev_priv, MIPI_CTRL(port),
436 GLK_DATA_LANE_STOP_STATE, 20))
437 drm_err(&dev_priv->drm,
438 "Date lane not in STOP state\n");
439 }
440
441 /* Wait for AFE LATCH */
442 for_each_dsi_port(port, intel_dsi->ports) {
443 if (intel_de_wait_for_set(dev_priv, BXT_MIPI_PORT_CTRL(port),
444 AFE_LATCHOUT, 20))
445 drm_err(&dev_priv->drm,
446 "D-PHY not entering LP-11 state\n");
447 }
448}
449
450static void bxt_dsi_device_ready(struct intel_encoder *encoder)
451{
452 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
453 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
454 enum port port;
455 u32 val;
456
457 drm_dbg_kms(&dev_priv->drm, "\n");
458
459 /* Enable MIPI PHY transparent latch */
460 for_each_dsi_port(port, intel_dsi->ports) {
461 val = intel_de_read(dev_priv, BXT_MIPI_PORT_CTRL(port));
462 intel_de_write(dev_priv, BXT_MIPI_PORT_CTRL(port),
463 val | LP_OUTPUT_HOLD);
464 usleep_range(2000, 2500);
465 }
466
467 /* Clear ULPS and set device ready */
468 for_each_dsi_port(port, intel_dsi->ports) {
469 val = intel_de_read(dev_priv, MIPI_DEVICE_READY(port));
470 val &= ~ULPS_STATE_MASK;
471 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), val);
472 usleep_range(2000, 2500);
473 val |= DEVICE_READY;
474 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), val);
475 }
476}
477
478static void vlv_dsi_device_ready(struct intel_encoder *encoder)
479{
480 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
481 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
482 enum port port;
483 u32 val;
484
485 drm_dbg_kms(&dev_priv->drm, "\n");
486
487 vlv_flisdsi_get(dev_priv);
488 /* program rcomp for compliance, reduce from 50 ohms to 45 ohms
489 * needed everytime after power gate */
490 vlv_flisdsi_write(dev_priv, 0x04, 0x0004);
491 vlv_flisdsi_put(dev_priv);
492
493 /* bandgap reset is needed after everytime we do power gate */
494 band_gap_reset(dev_priv);
495
496 for_each_dsi_port(port, intel_dsi->ports) {
497
498 intel_de_write(dev_priv, MIPI_DEVICE_READY(port),
499 ULPS_STATE_ENTER);
500 usleep_range(2500, 3000);
501
502 /* Enable MIPI PHY transparent latch
503 * Common bit for both MIPI Port A & MIPI Port C
504 * No similar bit in MIPI Port C reg
505 */
506 val = intel_de_read(dev_priv, MIPI_PORT_CTRL(PORT_A));
507 intel_de_write(dev_priv, MIPI_PORT_CTRL(PORT_A),
508 val | LP_OUTPUT_HOLD);
509 usleep_range(1000, 1500);
510
511 intel_de_write(dev_priv, MIPI_DEVICE_READY(port),
512 ULPS_STATE_EXIT);
513 usleep_range(2500, 3000);
514
515 intel_de_write(dev_priv, MIPI_DEVICE_READY(port),
516 DEVICE_READY);
517 usleep_range(2500, 3000);
518 }
519}
520
521static void intel_dsi_device_ready(struct intel_encoder *encoder)
522{
523 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
524
525 if (IS_GEMINILAKE(dev_priv))
526 glk_dsi_device_ready(encoder);
527 else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
528 bxt_dsi_device_ready(encoder);
529 else
530 vlv_dsi_device_ready(encoder);
531}
532
533static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder)
534{
535 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
536 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
537 enum port port;
538 u32 val;
539
540 /* Enter ULPS */
541 for_each_dsi_port(port, intel_dsi->ports) {
542 val = intel_de_read(dev_priv, MIPI_DEVICE_READY(port));
543 val &= ~ULPS_STATE_MASK;
544 val |= (ULPS_STATE_ENTER | DEVICE_READY);
545 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), val);
546 }
547
548 /* Wait for MIPI PHY status bit to unset */
549 for_each_dsi_port(port, intel_dsi->ports) {
550 if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
551 GLK_PHY_STATUS_PORT_READY, 20))
552 drm_err(&dev_priv->drm, "PHY is not turning OFF\n");
553 }
554
555 /* Wait for Pwr ACK bit to unset */
556 for_each_dsi_port(port, intel_dsi->ports) {
557 if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
558 GLK_MIPIIO_PORT_POWERED, 20))
559 drm_err(&dev_priv->drm,
560 "MIPI IO Port is not powergated\n");
561 }
562}
563
564static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder)
565{
566 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
567 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
568 enum port port;
569 u32 tmp;
570
571 /* Put the IO into reset */
572 tmp = intel_de_read(dev_priv, MIPI_CTRL(PORT_A));
573 tmp &= ~GLK_MIPIIO_RESET_RELEASED;
574 intel_de_write(dev_priv, MIPI_CTRL(PORT_A), tmp);
575
576 /* Wait for MIPI PHY status bit to unset */
577 for_each_dsi_port(port, intel_dsi->ports) {
578 if (intel_de_wait_for_clear(dev_priv, MIPI_CTRL(port),
579 GLK_PHY_STATUS_PORT_READY, 20))
580 drm_err(&dev_priv->drm, "PHY is not turning OFF\n");
581 }
582
583 /* Clear MIPI mode */
584 for_each_dsi_port(port, intel_dsi->ports) {
585 tmp = intel_de_read(dev_priv, MIPI_CTRL(port));
586 tmp &= ~GLK_MIPIIO_ENABLE;
587 intel_de_write(dev_priv, MIPI_CTRL(port), tmp);
588 }
589}
590
591static void glk_dsi_clear_device_ready(struct intel_encoder *encoder)
592{
593 glk_dsi_enter_low_power_mode(encoder);
594 glk_dsi_disable_mipi_io(encoder);
595}
596
597static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
598{
599 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
600 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
601 enum port port;
602
603 drm_dbg_kms(&dev_priv->drm, "\n");
604 for_each_dsi_port(port, intel_dsi->ports) {
605 /* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */
606 i915_reg_t port_ctrl = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
607 BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A);
608 u32 val;
609
610 intel_de_write(dev_priv, MIPI_DEVICE_READY(port),
611 DEVICE_READY | ULPS_STATE_ENTER);
612 usleep_range(2000, 2500);
613
614 intel_de_write(dev_priv, MIPI_DEVICE_READY(port),
615 DEVICE_READY | ULPS_STATE_EXIT);
616 usleep_range(2000, 2500);
617
618 intel_de_write(dev_priv, MIPI_DEVICE_READY(port),
619 DEVICE_READY | ULPS_STATE_ENTER);
620 usleep_range(2000, 2500);
621
622 /*
623 * On VLV/CHV, wait till Clock lanes are in LP-00 state for MIPI
624 * Port A only. MIPI Port C has no similar bit for checking.
625 */
626 if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) || port == PORT_A) &&
627 intel_de_wait_for_clear(dev_priv, port_ctrl,
628 AFE_LATCHOUT, 30))
629 drm_err(&dev_priv->drm, "DSI LP not going Low\n");
630
631 /* Disable MIPI PHY transparent latch */
632 val = intel_de_read(dev_priv, port_ctrl);
633 intel_de_write(dev_priv, port_ctrl, val & ~LP_OUTPUT_HOLD);
634 usleep_range(1000, 1500);
635
636 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), 0x00);
637 usleep_range(2000, 2500);
638 }
639}
640
641static void intel_dsi_port_enable(struct intel_encoder *encoder,
642 const struct intel_crtc_state *crtc_state)
643{
644 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
645 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
646 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
647 enum port port;
648
649 if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
650 u32 temp;
651 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
652 for_each_dsi_port(port, intel_dsi->ports) {
653 temp = intel_de_read(dev_priv,
654 MIPI_CTRL(port));
655 temp &= ~BXT_PIXEL_OVERLAP_CNT_MASK |
656 intel_dsi->pixel_overlap <<
657 BXT_PIXEL_OVERLAP_CNT_SHIFT;
658 intel_de_write(dev_priv, MIPI_CTRL(port),
659 temp);
660 }
661 } else {
662 temp = intel_de_read(dev_priv, VLV_CHICKEN_3);
663 temp &= ~PIXEL_OVERLAP_CNT_MASK |
664 intel_dsi->pixel_overlap <<
665 PIXEL_OVERLAP_CNT_SHIFT;
666 intel_de_write(dev_priv, VLV_CHICKEN_3, temp);
667 }
668 }
669
670 for_each_dsi_port(port, intel_dsi->ports) {
671 i915_reg_t port_ctrl = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
672 BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
673 u32 temp;
674
675 temp = intel_de_read(dev_priv, port_ctrl);
676
677 temp &= ~LANE_CONFIGURATION_MASK;
678 temp &= ~DUAL_LINK_MODE_MASK;
679
680 if (intel_dsi->ports == (BIT(PORT_A) | BIT(PORT_C))) {
681 temp |= (intel_dsi->dual_link - 1)
682 << DUAL_LINK_MODE_SHIFT;
683 if (IS_BROXTON(dev_priv))
684 temp |= LANE_CONFIGURATION_DUAL_LINK_A;
685 else
686 temp |= crtc->pipe ?
687 LANE_CONFIGURATION_DUAL_LINK_B :
688 LANE_CONFIGURATION_DUAL_LINK_A;
689 }
690
691 if (intel_dsi->pixel_format != MIPI_DSI_FMT_RGB888)
692 temp |= DITHERING_ENABLE;
693
694 /* assert ip_tg_enable signal */
695 intel_de_write(dev_priv, port_ctrl, temp | DPI_ENABLE);
696 intel_de_posting_read(dev_priv, port_ctrl);
697 }
698}
699
700static void intel_dsi_port_disable(struct intel_encoder *encoder)
701{
702 struct drm_device *dev = encoder->base.dev;
703 struct drm_i915_private *dev_priv = to_i915(dev);
704 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
705 enum port port;
706
707 for_each_dsi_port(port, intel_dsi->ports) {
708 i915_reg_t port_ctrl = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
709 BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
710 u32 temp;
711
712 /* de-assert ip_tg_enable signal */
713 temp = intel_de_read(dev_priv, port_ctrl);
714 intel_de_write(dev_priv, port_ctrl, temp & ~DPI_ENABLE);
715 intel_de_posting_read(dev_priv, port_ctrl);
716 }
717}
718
719static void intel_dsi_wait_panel_power_cycle(struct intel_dsi *intel_dsi)
720{
721 ktime_t panel_power_on_time;
722 s64 panel_power_off_duration;
723
724 panel_power_on_time = ktime_get_boottime();
725 panel_power_off_duration = ktime_ms_delta(panel_power_on_time,
726 intel_dsi->panel_power_off_time);
727
728 if (panel_power_off_duration < (s64)intel_dsi->panel_pwr_cycle_delay)
729 msleep(intel_dsi->panel_pwr_cycle_delay - panel_power_off_duration);
730}
731
732static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
733 const struct intel_crtc_state *pipe_config);
734static void intel_dsi_unprepare(struct intel_encoder *encoder);
735
736/*
737 * Panel enable/disable sequences from the VBT spec.
738 *
739 * Note the spec has AssertReset / DeassertReset swapped from their
740 * usual naming. We use the normal names to avoid confusion (so below
741 * they are swapped compared to the spec).
742 *
743 * Steps starting with MIPI refer to VBT sequences, note that for v2
744 * VBTs several steps which have a VBT in v2 are expected to be handled
745 * directly by the driver, by directly driving gpios for example.
746 *
747 * v2 video mode seq v3 video mode seq command mode seq
748 * - power on - MIPIPanelPowerOn - power on
749 * - wait t1+t2 - wait t1+t2
750 * - MIPIDeassertResetPin - MIPIDeassertResetPin - MIPIDeassertResetPin
751 * - io lines to lp-11 - io lines to lp-11 - io lines to lp-11
752 * - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds
753 * - MIPITearOn
754 * - MIPIDisplayOn
755 * - turn on DPI - turn on DPI - set pipe to dsr mode
756 * - MIPIDisplayOn - MIPIDisplayOn
757 * - wait t5 - wait t5
758 * - backlight on - MIPIBacklightOn - backlight on
759 * ... ... ... issue mem cmds ...
760 * - backlight off - MIPIBacklightOff - backlight off
761 * - wait t6 - wait t6
762 * - MIPIDisplayOff
763 * - turn off DPI - turn off DPI - disable pipe dsr mode
764 * - MIPITearOff
765 * - MIPIDisplayOff - MIPIDisplayOff
766 * - io lines to lp-00 - io lines to lp-00 - io lines to lp-00
767 * - MIPIAssertResetPin - MIPIAssertResetPin - MIPIAssertResetPin
768 * - wait t3 - wait t3
769 * - power off - MIPIPanelPowerOff - power off
770 * - wait t4 - wait t4
771 */
772
773/*
774 * DSI port enable has to be done before pipe and plane enable, so we do it in
775 * the pre_enable hook instead of the enable hook.
776 */
777static void intel_dsi_pre_enable(struct intel_atomic_state *state,
778 struct intel_encoder *encoder,
779 const struct intel_crtc_state *pipe_config,
780 const struct drm_connector_state *conn_state)
781{
782 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
783 struct drm_crtc *crtc = pipe_config->uapi.crtc;
784 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
785 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
786 enum pipe pipe = intel_crtc->pipe;
787 enum port port;
788 u32 val;
789 bool glk_cold_boot = false;
790
791 drm_dbg_kms(&dev_priv->drm, "\n");
792
793 intel_dsi_wait_panel_power_cycle(intel_dsi);
794
795 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
796
797 /*
798 * The BIOS may leave the PLL in a wonky state where it doesn't
799 * lock. It needs to be fully powered down to fix it.
800 */
801 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
802 bxt_dsi_pll_disable(encoder);
803 bxt_dsi_pll_enable(encoder, pipe_config);
804 } else {
805 vlv_dsi_pll_disable(encoder);
806 vlv_dsi_pll_enable(encoder, pipe_config);
807 }
808
809 if (IS_BROXTON(dev_priv)) {
810 /* Add MIPI IO reset programming for modeset */
811 val = intel_de_read(dev_priv, BXT_P_CR_GT_DISP_PWRON);
812 intel_de_write(dev_priv, BXT_P_CR_GT_DISP_PWRON,
813 val | MIPIO_RST_CTRL);
814
815 /* Power up DSI regulator */
816 intel_de_write(dev_priv, BXT_P_DSI_REGULATOR_CFG, STAP_SELECT);
817 intel_de_write(dev_priv, BXT_P_DSI_REGULATOR_TX_CTRL, 0);
818 }
819
820 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
821 u32 val;
822
823 /* Disable DPOunit clock gating, can stall pipe */
824 val = intel_de_read(dev_priv, DSPCLK_GATE_D);
825 val |= DPOUNIT_CLOCK_GATE_DISABLE;
826 intel_de_write(dev_priv, DSPCLK_GATE_D, val);
827 }
828
829 if (!IS_GEMINILAKE(dev_priv))
830 intel_dsi_prepare(encoder, pipe_config);
831
832 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
833
834 /*
835 * Give the panel time to power-on and then deassert its reset.
836 * Depending on the VBT MIPI sequences version the deassert-seq
837 * may contain the necessary delay, intel_dsi_msleep() will skip
838 * the delay in that case. If there is no deassert-seq, then an
839 * unconditional msleep is used to give the panel time to power-on.
840 */
841 if (dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET]) {
842 intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay);
843 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
844 } else {
845 msleep(intel_dsi->panel_on_delay);
846 }
847
848 if (IS_GEMINILAKE(dev_priv)) {
849 glk_cold_boot = glk_dsi_enable_io(encoder);
850
851 /* Prepare port in cold boot(s3/s4) scenario */
852 if (glk_cold_boot)
853 intel_dsi_prepare(encoder, pipe_config);
854 }
855
856 /* Put device in ready state (LP-11) */
857 intel_dsi_device_ready(encoder);
858
859 /* Prepare port in normal boot scenario */
860 if (IS_GEMINILAKE(dev_priv) && !glk_cold_boot)
861 intel_dsi_prepare(encoder, pipe_config);
862
863 /* Send initialization commands in LP mode */
864 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);
865
866 /*
867 * Enable port in pre-enable phase itself because as per hw team
868 * recommendation, port should be enabled before plane & pipe
869 */
870 if (is_cmd_mode(intel_dsi)) {
871 for_each_dsi_port(port, intel_dsi->ports)
872 intel_de_write(dev_priv,
873 MIPI_MAX_RETURN_PKT_SIZE(port), 8 * 4);
874 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_ON);
875 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
876 } else {
877 msleep(20); /* XXX */
878 for_each_dsi_port(port, intel_dsi->ports)
879 dpi_send_cmd(intel_dsi, TURN_ON, false, port);
880 intel_dsi_msleep(intel_dsi, 100);
881
882 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
883
884 intel_dsi_port_enable(encoder, pipe_config);
885 }
886
887 intel_panel_enable_backlight(pipe_config, conn_state);
888 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_ON);
889}
890
891static void bxt_dsi_enable(struct intel_atomic_state *state,
892 struct intel_encoder *encoder,
893 const struct intel_crtc_state *crtc_state,
894 const struct drm_connector_state *conn_state)
895{
896 drm_WARN_ON(state->base.dev, crtc_state->has_pch_encoder);
897
898 intel_crtc_vblank_on(crtc_state);
899}
900
901/*
902 * DSI port disable has to be done after pipe and plane disable, so we do it in
903 * the post_disable hook.
904 */
905static void intel_dsi_disable(struct intel_atomic_state *state,
906 struct intel_encoder *encoder,
907 const struct intel_crtc_state *old_crtc_state,
908 const struct drm_connector_state *old_conn_state)
909{
910 struct drm_i915_private *i915 = to_i915(encoder->base.dev);
911 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
912 enum port port;
913
914 drm_dbg_kms(&i915->drm, "\n");
915
916 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
917 intel_panel_disable_backlight(old_conn_state);
918
919 /*
920 * According to the spec we should send SHUTDOWN before
921 * MIPI_SEQ_DISPLAY_OFF only for v3+ VBTs, but field testing
922 * has shown that the v3 sequence works for v2 VBTs too
923 */
924 if (is_vid_mode(intel_dsi)) {
925 /* Send Shutdown command to the panel in LP mode */
926 for_each_dsi_port(port, intel_dsi->ports)
927 dpi_send_cmd(intel_dsi, SHUTDOWN, false, port);
928 msleep(10);
929 }
930}
931
932static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
933{
934 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
935
936 if (IS_GEMINILAKE(dev_priv))
937 glk_dsi_clear_device_ready(encoder);
938 else
939 vlv_dsi_clear_device_ready(encoder);
940}
941
942static void intel_dsi_post_disable(struct intel_atomic_state *state,
943 struct intel_encoder *encoder,
944 const struct intel_crtc_state *old_crtc_state,
945 const struct drm_connector_state *old_conn_state)
946{
947 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
948 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
949 enum port port;
950 u32 val;
951
952 drm_dbg_kms(&dev_priv->drm, "\n");
953
954 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
955 intel_crtc_vblank_off(old_crtc_state);
956
957 skl_scaler_disable(old_crtc_state);
958 }
959
960 if (is_vid_mode(intel_dsi)) {
961 for_each_dsi_port(port, intel_dsi->ports)
962 vlv_dsi_wait_for_fifo_empty(intel_dsi, port);
963
964 intel_dsi_port_disable(encoder);
965 usleep_range(2000, 5000);
966 }
967
968 intel_dsi_unprepare(encoder);
969
970 /*
971 * if disable packets are sent before sending shutdown packet then in
972 * some next enable sequence send turn on packet error is observed
973 */
974 if (is_cmd_mode(intel_dsi))
975 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_OFF);
976 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_OFF);
977
978 /* Transition to LP-00 */
979 intel_dsi_clear_device_ready(encoder);
980
981 if (IS_BROXTON(dev_priv)) {
982 /* Power down DSI regulator to save power */
983 intel_de_write(dev_priv, BXT_P_DSI_REGULATOR_CFG, STAP_SELECT);
984 intel_de_write(dev_priv, BXT_P_DSI_REGULATOR_TX_CTRL,
985 HS_IO_CTRL_SELECT);
986
987 /* Add MIPI IO reset programming for modeset */
988 val = intel_de_read(dev_priv, BXT_P_CR_GT_DISP_PWRON);
989 intel_de_write(dev_priv, BXT_P_CR_GT_DISP_PWRON,
990 val & ~MIPIO_RST_CTRL);
991 }
992
993 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
994 bxt_dsi_pll_disable(encoder);
995 } else {
996 u32 val;
997
998 vlv_dsi_pll_disable(encoder);
999
1000 val = intel_de_read(dev_priv, DSPCLK_GATE_D);
1001 val &= ~DPOUNIT_CLOCK_GATE_DISABLE;
1002 intel_de_write(dev_priv, DSPCLK_GATE_D, val);
1003 }
1004
1005 /* Assert reset */
1006 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
1007
1008 intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay);
1009 intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
1010
1011 intel_dsi->panel_power_off_time = ktime_get_boottime();
1012}
1013
1014static void intel_dsi_shutdown(struct intel_encoder *encoder)
1015{
1016 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
1017
1018 intel_dsi_wait_panel_power_cycle(intel_dsi);
1019}
1020
1021static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
1022 enum pipe *pipe)
1023{
1024 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
1025 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
1026 intel_wakeref_t wakeref;
1027 enum port port;
1028 bool active = false;
1029
1030 drm_dbg_kms(&dev_priv->drm, "\n");
1031
1032 wakeref = intel_display_power_get_if_enabled(dev_priv,
1033 encoder->power_domain);
1034 if (!wakeref)
1035 return false;
1036
1037 /*
1038 * On Broxton the PLL needs to be enabled with a valid divider
1039 * configuration, otherwise accessing DSI registers will hang the
1040 * machine. See BSpec North Display Engine registers/MIPI[BXT].
1041 */
1042 if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) &&
1043 !bxt_dsi_pll_is_enabled(dev_priv))
1044 goto out_put_power;
1045
1046 /* XXX: this only works for one DSI output */
1047 for_each_dsi_port(port, intel_dsi->ports) {
1048 i915_reg_t ctrl_reg = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
1049 BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
1050 bool enabled = intel_de_read(dev_priv, ctrl_reg) & DPI_ENABLE;
1051
1052 /*
1053 * Due to some hardware limitations on VLV/CHV, the DPI enable
1054 * bit in port C control register does not get set. As a
1055 * workaround, check pipe B conf instead.
1056 */
1057 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
1058 port == PORT_C)
1059 enabled = intel_de_read(dev_priv, PIPECONF(PIPE_B)) & PIPECONF_ENABLE;
1060
1061 /* Try command mode if video mode not enabled */
1062 if (!enabled) {
1063 u32 tmp = intel_de_read(dev_priv,
1064 MIPI_DSI_FUNC_PRG(port));
1065 enabled = tmp & CMD_MODE_DATA_WIDTH_MASK;
1066 }
1067
1068 if (!enabled)
1069 continue;
1070
1071 if (!(intel_de_read(dev_priv, MIPI_DEVICE_READY(port)) & DEVICE_READY))
1072 continue;
1073
1074 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
1075 u32 tmp = intel_de_read(dev_priv, MIPI_CTRL(port));
1076 tmp &= BXT_PIPE_SELECT_MASK;
1077 tmp >>= BXT_PIPE_SELECT_SHIFT;
1078
1079 if (drm_WARN_ON(&dev_priv->drm, tmp > PIPE_C))
1080 continue;
1081
1082 *pipe = tmp;
1083 } else {
1084 *pipe = port == PORT_A ? PIPE_A : PIPE_B;
1085 }
1086
1087 active = true;
1088 break;
1089 }
1090
1091out_put_power:
1092 intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
1093
1094 return active;
1095}
1096
1097static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
1098 struct intel_crtc_state *pipe_config)
1099{
1100 struct drm_device *dev = encoder->base.dev;
1101 struct drm_i915_private *dev_priv = to_i915(dev);
1102 struct drm_display_mode *adjusted_mode =
1103 &pipe_config->hw.adjusted_mode;
1104 struct drm_display_mode *adjusted_mode_sw;
1105 struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
1106 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
1107 unsigned int lane_count = intel_dsi->lane_count;
1108 unsigned int bpp, fmt;
1109 enum port port;
1110 u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
1111 u16 hfp_sw, hsync_sw, hbp_sw;
1112 u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
1113 crtc_hblank_start_sw, crtc_hblank_end_sw;
1114
1115 /* FIXME: hw readout should not depend on SW state */
1116 adjusted_mode_sw = &crtc->config->hw.adjusted_mode;
1117
1118 /*
1119 * Atleast one port is active as encoder->get_config called only if
1120 * encoder->get_hw_state() returns true.
1121 */
1122 for_each_dsi_port(port, intel_dsi->ports) {
1123 if (intel_de_read(dev_priv, BXT_MIPI_PORT_CTRL(port)) & DPI_ENABLE)
1124 break;
1125 }
1126
1127 fmt = intel_de_read(dev_priv, MIPI_DSI_FUNC_PRG(port)) & VID_MODE_FORMAT_MASK;
1128 bpp = mipi_dsi_pixel_format_to_bpp(
1129 pixel_format_from_register_bits(fmt));
1130
1131 pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
1132
1133 /* Enable Frame time stamo based scanline reporting */
1134 pipe_config->mode_flags |=
1135 I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP;
1136
1137 /* In terms of pixels */
1138 adjusted_mode->crtc_hdisplay =
1139 intel_de_read(dev_priv,
1140 BXT_MIPI_TRANS_HACTIVE(port));
1141 adjusted_mode->crtc_vdisplay =
1142 intel_de_read(dev_priv,
1143 BXT_MIPI_TRANS_VACTIVE(port));
1144 adjusted_mode->crtc_vtotal =
1145 intel_de_read(dev_priv,
1146 BXT_MIPI_TRANS_VTOTAL(port));
1147
1148 hactive = adjusted_mode->crtc_hdisplay;
1149 hfp = intel_de_read(dev_priv, MIPI_HFP_COUNT(port));
1150
1151 /*
1152 * Meaningful for video mode non-burst sync pulse mode only,
1153 * can be zero for non-burst sync events and burst modes
1154 */
1155 hsync = intel_de_read(dev_priv, MIPI_HSYNC_PADDING_COUNT(port));
1156 hbp = intel_de_read(dev_priv, MIPI_HBP_COUNT(port));
1157
1158 /* harizontal values are in terms of high speed byte clock */
1159 hfp = pixels_from_txbyteclkhs(hfp, bpp, lane_count,
1160 intel_dsi->burst_mode_ratio);
1161 hsync = pixels_from_txbyteclkhs(hsync, bpp, lane_count,
1162 intel_dsi->burst_mode_ratio);
1163 hbp = pixels_from_txbyteclkhs(hbp, bpp, lane_count,
1164 intel_dsi->burst_mode_ratio);
1165
1166 if (intel_dsi->dual_link) {
1167 hfp *= 2;
1168 hsync *= 2;
1169 hbp *= 2;
1170 }
1171
1172 /* vertical values are in terms of lines */
1173 vfp = intel_de_read(dev_priv, MIPI_VFP_COUNT(port));
1174 vsync = intel_de_read(dev_priv, MIPI_VSYNC_PADDING_COUNT(port));
1175 vbp = intel_de_read(dev_priv, MIPI_VBP_COUNT(port));
1176
1177 adjusted_mode->crtc_htotal = hactive + hfp + hsync + hbp;
1178 adjusted_mode->crtc_hsync_start = hfp + adjusted_mode->crtc_hdisplay;
1179 adjusted_mode->crtc_hsync_end = hsync + adjusted_mode->crtc_hsync_start;
1180 adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay;
1181 adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal;
1182
1183 adjusted_mode->crtc_vsync_start = vfp + adjusted_mode->crtc_vdisplay;
1184 adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start;
1185 adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay;
1186 adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
1187
1188 /*
1189 * In BXT DSI there is no regs programmed with few horizontal timings
1190 * in Pixels but txbyteclkhs.. So retrieval process adds some
1191 * ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs.
1192 * Actually here for the given adjusted_mode, we are calculating the
1193 * value programmed to the port and then back to the horizontal timing
1194 * param in pixels. This is the expected value, including roundup errors
1195 * And if that is same as retrieved value from port, then
1196 * (HW state) adjusted_mode's horizontal timings are corrected to
1197 * match with SW state to nullify the errors.
1198 */
1199 /* Calculating the value programmed to the Port register */
1200 hfp_sw = adjusted_mode_sw->crtc_hsync_start -
1201 adjusted_mode_sw->crtc_hdisplay;
1202 hsync_sw = adjusted_mode_sw->crtc_hsync_end -
1203 adjusted_mode_sw->crtc_hsync_start;
1204 hbp_sw = adjusted_mode_sw->crtc_htotal -
1205 adjusted_mode_sw->crtc_hsync_end;
1206
1207 if (intel_dsi->dual_link) {
1208 hfp_sw /= 2;
1209 hsync_sw /= 2;
1210 hbp_sw /= 2;
1211 }
1212
1213 hfp_sw = txbyteclkhs(hfp_sw, bpp, lane_count,
1214 intel_dsi->burst_mode_ratio);
1215 hsync_sw = txbyteclkhs(hsync_sw, bpp, lane_count,
1216 intel_dsi->burst_mode_ratio);
1217 hbp_sw = txbyteclkhs(hbp_sw, bpp, lane_count,
1218 intel_dsi->burst_mode_ratio);
1219
1220 /* Reverse calculating the adjusted mode parameters from port reg vals*/
1221 hfp_sw = pixels_from_txbyteclkhs(hfp_sw, bpp, lane_count,
1222 intel_dsi->burst_mode_ratio);
1223 hsync_sw = pixels_from_txbyteclkhs(hsync_sw, bpp, lane_count,
1224 intel_dsi->burst_mode_ratio);
1225 hbp_sw = pixels_from_txbyteclkhs(hbp_sw, bpp, lane_count,
1226 intel_dsi->burst_mode_ratio);
1227
1228 if (intel_dsi->dual_link) {
1229 hfp_sw *= 2;
1230 hsync_sw *= 2;
1231 hbp_sw *= 2;
1232 }
1233
1234 crtc_htotal_sw = adjusted_mode_sw->crtc_hdisplay + hfp_sw +
1235 hsync_sw + hbp_sw;
1236 crtc_hsync_start_sw = hfp_sw + adjusted_mode_sw->crtc_hdisplay;
1237 crtc_hsync_end_sw = hsync_sw + crtc_hsync_start_sw;
1238 crtc_hblank_start_sw = adjusted_mode_sw->crtc_hdisplay;
1239 crtc_hblank_end_sw = crtc_htotal_sw;
1240
1241 if (adjusted_mode->crtc_htotal == crtc_htotal_sw)
1242 adjusted_mode->crtc_htotal = adjusted_mode_sw->crtc_htotal;
1243
1244 if (adjusted_mode->crtc_hsync_start == crtc_hsync_start_sw)
1245 adjusted_mode->crtc_hsync_start =
1246 adjusted_mode_sw->crtc_hsync_start;
1247
1248 if (adjusted_mode->crtc_hsync_end == crtc_hsync_end_sw)
1249 adjusted_mode->crtc_hsync_end =
1250 adjusted_mode_sw->crtc_hsync_end;
1251
1252 if (adjusted_mode->crtc_hblank_start == crtc_hblank_start_sw)
1253 adjusted_mode->crtc_hblank_start =
1254 adjusted_mode_sw->crtc_hblank_start;
1255
1256 if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw)
1257 adjusted_mode->crtc_hblank_end =
1258 adjusted_mode_sw->crtc_hblank_end;
1259}
1260
1261static void intel_dsi_get_config(struct intel_encoder *encoder,
1262 struct intel_crtc_state *pipe_config)
1263{
1264 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
1265 u32 pclk;
1266 drm_dbg_kms(&dev_priv->drm, "\n");
1267
1268 pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
1269
1270 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
1271 bxt_dsi_get_pipe_config(encoder, pipe_config);
1272 pclk = bxt_dsi_get_pclk(encoder, pipe_config);
1273 } else {
1274 pclk = vlv_dsi_get_pclk(encoder, pipe_config);
1275 }
1276
1277 if (pclk) {
1278 pipe_config->hw.adjusted_mode.crtc_clock = pclk;
1279 pipe_config->port_clock = pclk;
1280 }
1281}
1282
1283/* return txclkesc cycles in terms of divider and duration in us */
1284static u16 txclkesc(u32 divider, unsigned int us)
1285{
1286 switch (divider) {
1287 case ESCAPE_CLOCK_DIVIDER_1:
1288 default:
1289 return 20 * us;
1290 case ESCAPE_CLOCK_DIVIDER_2:
1291 return 10 * us;
1292 case ESCAPE_CLOCK_DIVIDER_4:
1293 return 5 * us;
1294 }
1295}
1296
1297static void set_dsi_timings(struct drm_encoder *encoder,
1298 const struct drm_display_mode *adjusted_mode)
1299{
1300 struct drm_device *dev = encoder->dev;
1301 struct drm_i915_private *dev_priv = to_i915(dev);
1302 struct intel_dsi *intel_dsi = enc_to_intel_dsi(to_intel_encoder(encoder));
1303 enum port port;
1304 unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
1305 unsigned int lane_count = intel_dsi->lane_count;
1306
1307 u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
1308
1309 hactive = adjusted_mode->crtc_hdisplay;
1310 hfp = adjusted_mode->crtc_hsync_start - adjusted_mode->crtc_hdisplay;
1311 hsync = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
1312 hbp = adjusted_mode->crtc_htotal - adjusted_mode->crtc_hsync_end;
1313
1314 if (intel_dsi->dual_link) {
1315 hactive /= 2;
1316 if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
1317 hactive += intel_dsi->pixel_overlap;
1318 hfp /= 2;
1319 hsync /= 2;
1320 hbp /= 2;
1321 }
1322
1323 vfp = adjusted_mode->crtc_vsync_start - adjusted_mode->crtc_vdisplay;
1324 vsync = adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start;
1325 vbp = adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vsync_end;
1326
1327 /* horizontal values are in terms of high speed byte clock */
1328 hactive = txbyteclkhs(hactive, bpp, lane_count,
1329 intel_dsi->burst_mode_ratio);
1330 hfp = txbyteclkhs(hfp, bpp, lane_count, intel_dsi->burst_mode_ratio);
1331 hsync = txbyteclkhs(hsync, bpp, lane_count,
1332 intel_dsi->burst_mode_ratio);
1333 hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
1334
1335 for_each_dsi_port(port, intel_dsi->ports) {
1336 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
1337 /*
1338 * Program hdisplay and vdisplay on MIPI transcoder.
1339 * This is different from calculated hactive and
1340 * vactive, as they are calculated per channel basis,
1341 * whereas these values should be based on resolution.
1342 */
1343 intel_de_write(dev_priv, BXT_MIPI_TRANS_HACTIVE(port),
1344 adjusted_mode->crtc_hdisplay);
1345 intel_de_write(dev_priv, BXT_MIPI_TRANS_VACTIVE(port),
1346 adjusted_mode->crtc_vdisplay);
1347 intel_de_write(dev_priv, BXT_MIPI_TRANS_VTOTAL(port),
1348 adjusted_mode->crtc_vtotal);
1349 }
1350
1351 intel_de_write(dev_priv, MIPI_HACTIVE_AREA_COUNT(port),
1352 hactive);
1353 intel_de_write(dev_priv, MIPI_HFP_COUNT(port), hfp);
1354
1355 /* meaningful for video mode non-burst sync pulse mode only,
1356 * can be zero for non-burst sync events and burst modes */
1357 intel_de_write(dev_priv, MIPI_HSYNC_PADDING_COUNT(port),
1358 hsync);
1359 intel_de_write(dev_priv, MIPI_HBP_COUNT(port), hbp);
1360
1361 /* vertical values are in terms of lines */
1362 intel_de_write(dev_priv, MIPI_VFP_COUNT(port), vfp);
1363 intel_de_write(dev_priv, MIPI_VSYNC_PADDING_COUNT(port),
1364 vsync);
1365 intel_de_write(dev_priv, MIPI_VBP_COUNT(port), vbp);
1366 }
1367}
1368
1369static u32 pixel_format_to_reg(enum mipi_dsi_pixel_format fmt)
1370{
1371 switch (fmt) {
1372 case MIPI_DSI_FMT_RGB888:
1373 return VID_MODE_FORMAT_RGB888;
1374 case MIPI_DSI_FMT_RGB666:
1375 return VID_MODE_FORMAT_RGB666;
1376 case MIPI_DSI_FMT_RGB666_PACKED:
1377 return VID_MODE_FORMAT_RGB666_PACKED;
1378 case MIPI_DSI_FMT_RGB565:
1379 return VID_MODE_FORMAT_RGB565;
1380 default:
1381 MISSING_CASE(fmt);
1382 return VID_MODE_FORMAT_RGB666;
1383 }
1384}
1385
1386static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
1387 const struct intel_crtc_state *pipe_config)
1388{
1389 struct drm_encoder *encoder = &intel_encoder->base;
1390 struct drm_device *dev = encoder->dev;
1391 struct drm_i915_private *dev_priv = to_i915(dev);
1392 struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->uapi.crtc);
1393 struct intel_dsi *intel_dsi = enc_to_intel_dsi(to_intel_encoder(encoder));
1394 const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
1395 enum port port;
1396 unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
1397 u32 val, tmp;
1398 u16 mode_hdisplay;
1399
1400 drm_dbg_kms(&dev_priv->drm, "pipe %c\n", pipe_name(intel_crtc->pipe));
1401
1402 mode_hdisplay = adjusted_mode->crtc_hdisplay;
1403
1404 if (intel_dsi->dual_link) {
1405 mode_hdisplay /= 2;
1406 if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
1407 mode_hdisplay += intel_dsi->pixel_overlap;
1408 }
1409
1410 for_each_dsi_port(port, intel_dsi->ports) {
1411 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
1412 /*
1413 * escape clock divider, 20MHz, shared for A and C.
1414 * device ready must be off when doing this! txclkesc?
1415 */
1416 tmp = intel_de_read(dev_priv, MIPI_CTRL(PORT_A));
1417 tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
1418 intel_de_write(dev_priv, MIPI_CTRL(PORT_A),
1419 tmp | ESCAPE_CLOCK_DIVIDER_1);
1420
1421 /* read request priority is per pipe */
1422 tmp = intel_de_read(dev_priv, MIPI_CTRL(port));
1423 tmp &= ~READ_REQUEST_PRIORITY_MASK;
1424 intel_de_write(dev_priv, MIPI_CTRL(port),
1425 tmp | READ_REQUEST_PRIORITY_HIGH);
1426 } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
1427 enum pipe pipe = intel_crtc->pipe;
1428
1429 tmp = intel_de_read(dev_priv, MIPI_CTRL(port));
1430 tmp &= ~BXT_PIPE_SELECT_MASK;
1431
1432 tmp |= BXT_PIPE_SELECT(pipe);
1433 intel_de_write(dev_priv, MIPI_CTRL(port), tmp);
1434 }
1435
1436 /* XXX: why here, why like this? handling in irq handler?! */
1437 intel_de_write(dev_priv, MIPI_INTR_STAT(port), 0xffffffff);
1438 intel_de_write(dev_priv, MIPI_INTR_EN(port), 0xffffffff);
1439
1440 intel_de_write(dev_priv, MIPI_DPHY_PARAM(port),
1441 intel_dsi->dphy_reg);
1442
1443 intel_de_write(dev_priv, MIPI_DPI_RESOLUTION(port),
1444 adjusted_mode->crtc_vdisplay << VERTICAL_ADDRESS_SHIFT | mode_hdisplay << HORIZONTAL_ADDRESS_SHIFT);
1445 }
1446
1447 set_dsi_timings(encoder, adjusted_mode);
1448
1449 val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT;
1450 if (is_cmd_mode(intel_dsi)) {
1451 val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT;
1452 val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */
1453 } else {
1454 val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT;
1455 val |= pixel_format_to_reg(intel_dsi->pixel_format);
1456 }
1457
1458 tmp = 0;
1459 if (intel_dsi->eotp_pkt == 0)
1460 tmp |= EOT_DISABLE;
1461 if (intel_dsi->clock_stop)
1462 tmp |= CLOCKSTOP;
1463
1464 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
1465 tmp |= BXT_DPHY_DEFEATURE_EN;
1466 if (!is_cmd_mode(intel_dsi))
1467 tmp |= BXT_DEFEATURE_DPI_FIFO_CTR;
1468 }
1469
1470 for_each_dsi_port(port, intel_dsi->ports) {
1471 intel_de_write(dev_priv, MIPI_DSI_FUNC_PRG(port), val);
1472
1473 /* timeouts for recovery. one frame IIUC. if counter expires,
1474 * EOT and stop state. */
1475
1476 /*
1477 * In burst mode, value greater than one DPI line Time in byte
1478 * clock (txbyteclkhs) To timeout this timer 1+ of the above
1479 * said value is recommended.
1480 *
1481 * In non-burst mode, Value greater than one DPI frame time in
1482 * byte clock(txbyteclkhs) To timeout this timer 1+ of the above
1483 * said value is recommended.
1484 *
1485 * In DBI only mode, value greater than one DBI frame time in
1486 * byte clock(txbyteclkhs) To timeout this timer 1+ of the above
1487 * said value is recommended.
1488 */
1489
1490 if (is_vid_mode(intel_dsi) &&
1491 intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
1492 intel_de_write(dev_priv, MIPI_HS_TX_TIMEOUT(port),
1493 txbyteclkhs(adjusted_mode->crtc_htotal, bpp, intel_dsi->lane_count, intel_dsi->burst_mode_ratio) + 1);
1494 } else {
1495 intel_de_write(dev_priv, MIPI_HS_TX_TIMEOUT(port),
1496 txbyteclkhs(adjusted_mode->crtc_vtotal * adjusted_mode->crtc_htotal, bpp, intel_dsi->lane_count, intel_dsi->burst_mode_ratio) + 1);
1497 }
1498 intel_de_write(dev_priv, MIPI_LP_RX_TIMEOUT(port),
1499 intel_dsi->lp_rx_timeout);
1500 intel_de_write(dev_priv, MIPI_TURN_AROUND_TIMEOUT(port),
1501 intel_dsi->turn_arnd_val);
1502 intel_de_write(dev_priv, MIPI_DEVICE_RESET_TIMER(port),
1503 intel_dsi->rst_timer_val);
1504
1505 /* dphy stuff */
1506
1507 /* in terms of low power clock */
1508 intel_de_write(dev_priv, MIPI_INIT_COUNT(port),
1509 txclkesc(intel_dsi->escape_clk_div, 100));
1510
1511 if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) &&
1512 !intel_dsi->dual_link) {
1513 /*
1514 * BXT spec says write MIPI_INIT_COUNT for
1515 * both the ports, even if only one is
1516 * getting used. So write the other port
1517 * if not in dual link mode.
1518 */
1519 intel_de_write(dev_priv,
1520 MIPI_INIT_COUNT(port == PORT_A ? PORT_C : PORT_A),
1521 intel_dsi->init_count);
1522 }
1523
1524 /* recovery disables */
1525 intel_de_write(dev_priv, MIPI_EOT_DISABLE(port), tmp);
1526
1527 /* in terms of low power clock */
1528 intel_de_write(dev_priv, MIPI_INIT_COUNT(port),
1529 intel_dsi->init_count);
1530
1531 /* in terms of txbyteclkhs. actual high to low switch +
1532 * MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK.
1533 *
1534 * XXX: write MIPI_STOP_STATE_STALL?
1535 */
1536 intel_de_write(dev_priv, MIPI_HIGH_LOW_SWITCH_COUNT(port),
1537 intel_dsi->hs_to_lp_count);
1538
1539 /* XXX: low power clock equivalence in terms of byte clock.
1540 * the number of byte clocks occupied in one low power clock.
1541 * based on txbyteclkhs and txclkesc.
1542 * txclkesc time / txbyteclk time * (105 + MIPI_STOP_STATE_STALL
1543 * ) / 105.???
1544 */
1545 intel_de_write(dev_priv, MIPI_LP_BYTECLK(port),
1546 intel_dsi->lp_byte_clk);
1547
1548 if (IS_GEMINILAKE(dev_priv)) {
1549 intel_de_write(dev_priv, MIPI_TLPX_TIME_COUNT(port),
1550 intel_dsi->lp_byte_clk);
1551 /* Shadow of DPHY reg */
1552 intel_de_write(dev_priv, MIPI_CLK_LANE_TIMING(port),
1553 intel_dsi->dphy_reg);
1554 }
1555
1556 /* the bw essential for transmitting 16 long packets containing
1557 * 252 bytes meant for dcs write memory command is programmed in
1558 * this register in terms of byte clocks. based on dsi transfer
1559 * rate and the number of lanes configured the time taken to
1560 * transmit 16 long packets in a dsi stream varies. */
1561 intel_de_write(dev_priv, MIPI_DBI_BW_CTRL(port),
1562 intel_dsi->bw_timer);
1563
1564 intel_de_write(dev_priv, MIPI_CLK_LANE_SWITCH_TIME_CNT(port),
1565 intel_dsi->clk_lp_to_hs_count << LP_HS_SSW_CNT_SHIFT | intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT);
1566
1567 if (is_vid_mode(intel_dsi))
1568 /* Some panels might have resolution which is not a
1569 * multiple of 64 like 1366 x 768. Enable RANDOM
1570 * resolution support for such panels by default */
1571 intel_de_write(dev_priv, MIPI_VIDEO_MODE_FORMAT(port),
1572 intel_dsi->video_frmt_cfg_bits | intel_dsi->video_mode_format | IP_TG_CONFIG | RANDOM_DPI_DISPLAY_RESOLUTION);
1573 }
1574}
1575
1576static void intel_dsi_unprepare(struct intel_encoder *encoder)
1577{
1578 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
1579 struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
1580 enum port port;
1581 u32 val;
1582
1583 if (IS_GEMINILAKE(dev_priv))
1584 return;
1585
1586 for_each_dsi_port(port, intel_dsi->ports) {
1587 /* Panel commands can be sent when clock is in LP11 */
1588 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), 0x0);
1589
1590 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
1591 bxt_dsi_reset_clocks(encoder, port);
1592 else
1593 vlv_dsi_reset_clocks(encoder, port);
1594 intel_de_write(dev_priv, MIPI_EOT_DISABLE(port), CLOCKSTOP);
1595
1596 val = intel_de_read(dev_priv, MIPI_DSI_FUNC_PRG(port));
1597 val &= ~VID_MODE_FORMAT_MASK;
1598 intel_de_write(dev_priv, MIPI_DSI_FUNC_PRG(port), val);
1599
1600 intel_de_write(dev_priv, MIPI_DEVICE_READY(port), 0x1);
1601 }
1602}
1603
1604static void intel_dsi_encoder_destroy(struct drm_encoder *encoder)
1605{
1606 struct intel_dsi *intel_dsi = enc_to_intel_dsi(to_intel_encoder(encoder));
1607
1608 intel_dsi_vbt_gpio_cleanup(intel_dsi);
1609 intel_encoder_destroy(encoder);
1610}
1611
1612static const struct drm_encoder_funcs intel_dsi_funcs = {
1613 .destroy = intel_dsi_encoder_destroy,
1614};
1615
1616static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = {
1617 .get_modes = intel_dsi_get_modes,
1618 .mode_valid = intel_dsi_mode_valid,
1619 .atomic_check = intel_digital_connector_atomic_check,
1620};
1621
1622static const struct drm_connector_funcs intel_dsi_connector_funcs = {
1623 .detect = intel_panel_detect,
1624 .late_register = intel_connector_register,
1625 .early_unregister = intel_connector_unregister,
1626 .destroy = intel_connector_destroy,
1627 .fill_modes = drm_helper_probe_single_connector_modes,
1628 .atomic_get_property = intel_digital_connector_atomic_get_property,
1629 .atomic_set_property = intel_digital_connector_atomic_set_property,
1630 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
1631 .atomic_duplicate_state = intel_digital_connector_duplicate_state,
1632};
1633
1634static void vlv_dsi_add_properties(struct intel_connector *connector)
1635{
1636 struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
1637
1638 if (connector->panel.fixed_mode) {
1639 u32 allowed_scalers;
1640
1641 allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) | BIT(DRM_MODE_SCALE_FULLSCREEN);
1642 if (!HAS_GMCH(dev_priv))
1643 allowed_scalers |= BIT(DRM_MODE_SCALE_CENTER);
1644
1645 drm_connector_attach_scaling_mode_property(&connector->base,
1646 allowed_scalers);
1647
1648 connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
1649
1650 drm_connector_set_panel_orientation_with_quirk(
1651 &connector->base,
1652 intel_dsi_get_panel_orientation(connector),
1653 connector->panel.fixed_mode->hdisplay,
1654 connector->panel.fixed_mode->vdisplay);
1655 }
1656}
1657
1658#define NS_KHZ_RATIO 1000000
1659
1660#define PREPARE_CNT_MAX 0x3F
1661#define EXIT_ZERO_CNT_MAX 0x3F
1662#define CLK_ZERO_CNT_MAX 0xFF
1663#define TRAIL_CNT_MAX 0x1F
1664
1665static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
1666{
1667 struct drm_device *dev = intel_dsi->base.base.dev;
1668 struct drm_i915_private *dev_priv = to_i915(dev);
1669 struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
1670 u32 tlpx_ns, extra_byte_count, tlpx_ui;
1671 u32 ui_num, ui_den;
1672 u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
1673 u32 ths_prepare_ns, tclk_trail_ns;
1674 u32 tclk_prepare_clkzero, ths_prepare_hszero;
1675 u32 lp_to_hs_switch, hs_to_lp_switch;
1676 u32 mul;
1677
1678 tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
1679
1680 switch (intel_dsi->lane_count) {
1681 case 1:
1682 case 2:
1683 extra_byte_count = 2;
1684 break;
1685 case 3:
1686 extra_byte_count = 4;
1687 break;
1688 case 4:
1689 default:
1690 extra_byte_count = 3;
1691 break;
1692 }
1693
1694 /* in Kbps */
1695 ui_num = NS_KHZ_RATIO;
1696 ui_den = intel_dsi_bitrate(intel_dsi);
1697
1698 tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
1699 ths_prepare_hszero = mipi_config->ths_prepare_hszero;
1700
1701 /*
1702 * B060
1703 * LP byte clock = TLPX/ (8UI)
1704 */
1705 intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
1706
1707 /* DDR clock period = 2 * UI
1708 * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ)
1709 * UI(nsec) = 10^6 / bitrate
1710 * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate
1711 * DDR clock count = ns_value / DDR clock period
1712 *
1713 * For GEMINILAKE dphy_param_reg will be programmed in terms of
1714 * HS byte clock count for other platform in HS ddr clock count
1715 */
1716 mul = IS_GEMINILAKE(dev_priv) ? 8 : 2;
1717 ths_prepare_ns = max(mipi_config->ths_prepare,
1718 mipi_config->tclk_prepare);
1719
1720 /* prepare count */
1721 prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
1722
1723 if (prepare_cnt > PREPARE_CNT_MAX) {
1724 drm_dbg_kms(&dev_priv->drm, "prepare count too high %u\n",
1725 prepare_cnt);
1726 prepare_cnt = PREPARE_CNT_MAX;
1727 }
1728
1729 /* exit zero count */
1730 exit_zero_cnt = DIV_ROUND_UP(
1731 (ths_prepare_hszero - ths_prepare_ns) * ui_den,
1732 ui_num * mul
1733 );
1734
1735 /*
1736 * Exit zero is unified val ths_zero and ths_exit
1737 * minimum value for ths_exit = 110ns
1738 * min (exit_zero_cnt * 2) = 110/UI
1739 * exit_zero_cnt = 55/UI
1740 */
1741 if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
1742 exit_zero_cnt += 1;
1743
1744 if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
1745 drm_dbg_kms(&dev_priv->drm, "exit zero count too high %u\n",
1746 exit_zero_cnt);
1747 exit_zero_cnt = EXIT_ZERO_CNT_MAX;
1748 }
1749
1750 /* clk zero count */
1751 clk_zero_cnt = DIV_ROUND_UP(
1752 (tclk_prepare_clkzero - ths_prepare_ns)
1753 * ui_den, ui_num * mul);
1754
1755 if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
1756 drm_dbg_kms(&dev_priv->drm, "clock zero count too high %u\n",
1757 clk_zero_cnt);
1758 clk_zero_cnt = CLK_ZERO_CNT_MAX;
1759 }
1760
1761 /* trail count */
1762 tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
1763 trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
1764
1765 if (trail_cnt > TRAIL_CNT_MAX) {
1766 drm_dbg_kms(&dev_priv->drm, "trail count too high %u\n",
1767 trail_cnt);
1768 trail_cnt = TRAIL_CNT_MAX;
1769 }
1770
1771 /* B080 */
1772 intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
1773 clk_zero_cnt << 8 | prepare_cnt;
1774
1775 /*
1776 * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT *
1777 * mul + 10UI + Extra Byte Count
1778 *
1779 * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
1780 * Extra Byte Count is calculated according to number of lanes.
1781 * High Low Switch Count is the Max of LP to HS and
1782 * HS to LP switch count
1783 *
1784 */
1785 tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
1786
1787 /* B044 */
1788 /* FIXME:
1789 * The comment above does not match with the code */
1790 lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul +
1791 exit_zero_cnt * mul + 10, 8);
1792
1793 hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
1794
1795 intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
1796 intel_dsi->hs_to_lp_count += extra_byte_count;
1797
1798 /* B088 */
1799 /* LP -> HS for clock lanes
1800 * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
1801 * extra byte count
1802 * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
1803 * 2(in UI) + extra byte count
1804 * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
1805 * 8 + extra byte count
1806 */
1807 intel_dsi->clk_lp_to_hs_count =
1808 DIV_ROUND_UP(
1809 4 * tlpx_ui + prepare_cnt * 2 +
1810 clk_zero_cnt * 2,
1811 8);
1812
1813 intel_dsi->clk_lp_to_hs_count += extra_byte_count;
1814
1815 /* HS->LP for Clock Lanes
1816 * Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
1817 * Extra byte count
1818 * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
1819 * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
1820 * Extra byte count
1821 */
1822 intel_dsi->clk_hs_to_lp_count =
1823 DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
1824 8);
1825 intel_dsi->clk_hs_to_lp_count += extra_byte_count;
1826
1827 intel_dsi_log_params(intel_dsi);
1828}
1829
1830void vlv_dsi_init(struct drm_i915_private *dev_priv)
1831{
1832 struct drm_device *dev = &dev_priv->drm;
1833 struct intel_dsi *intel_dsi;
1834 struct intel_encoder *intel_encoder;
1835 struct drm_encoder *encoder;
1836 struct intel_connector *intel_connector;
1837 struct drm_connector *connector;
1838 struct drm_display_mode *current_mode, *fixed_mode;
1839 enum port port;
1840 enum pipe pipe;
1841
1842 drm_dbg_kms(&dev_priv->drm, "\n");
1843
1844 /* There is no detection method for MIPI so rely on VBT */
1845 if (!intel_bios_is_dsi_present(dev_priv, &port))
1846 return;
1847
1848 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
1849 dev_priv->mipi_mmio_base = BXT_MIPI_BASE;
1850 else
1851 dev_priv->mipi_mmio_base = VLV_MIPI_BASE;
1852
1853 intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
1854 if (!intel_dsi)
1855 return;
1856
1857 intel_connector = intel_connector_alloc();
1858 if (!intel_connector) {
1859 kfree(intel_dsi);
1860 return;
1861 }
1862
1863 intel_encoder = &intel_dsi->base;
1864 encoder = &intel_encoder->base;
1865 intel_dsi->attached_connector = intel_connector;
1866
1867 connector = &intel_connector->base;
1868
1869 drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI,
1870 "DSI %c", port_name(port));
1871
1872 intel_encoder->compute_config = intel_dsi_compute_config;
1873 intel_encoder->pre_enable = intel_dsi_pre_enable;
1874 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
1875 intel_encoder->enable = bxt_dsi_enable;
1876 intel_encoder->disable = intel_dsi_disable;
1877 intel_encoder->post_disable = intel_dsi_post_disable;
1878 intel_encoder->get_hw_state = intel_dsi_get_hw_state;
1879 intel_encoder->get_config = intel_dsi_get_config;
1880 intel_encoder->update_pipe = intel_panel_update_backlight;
1881 intel_encoder->shutdown = intel_dsi_shutdown;
1882
1883 intel_connector->get_hw_state = intel_connector_get_hw_state;
1884
1885 intel_encoder->port = port;
1886 intel_encoder->type = INTEL_OUTPUT_DSI;
1887 intel_encoder->power_domain = POWER_DOMAIN_PORT_DSI;
1888 intel_encoder->cloneable = 0;
1889
1890 /*
1891 * On BYT/CHV, pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI
1892 * port C. BXT isn't limited like this.
1893 */
1894 if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
1895 intel_encoder->pipe_mask = ~0;
1896 else if (port == PORT_A)
1897 intel_encoder->pipe_mask = BIT(PIPE_A);
1898 else
1899 intel_encoder->pipe_mask = BIT(PIPE_B);
1900
1901 intel_dsi->panel_power_off_time = ktime_get_boottime();
1902
1903 if (dev_priv->vbt.dsi.config->dual_link)
1904 intel_dsi->ports = BIT(PORT_A) | BIT(PORT_C);
1905 else
1906 intel_dsi->ports = BIT(port);
1907
1908 intel_dsi->dcs_backlight_ports = dev_priv->vbt.dsi.bl_ports;
1909 intel_dsi->dcs_cabc_ports = dev_priv->vbt.dsi.cabc_ports;
1910
1911 /* Create a DSI host (and a device) for each port. */
1912 for_each_dsi_port(port, intel_dsi->ports) {
1913 struct intel_dsi_host *host;
1914
1915 host = intel_dsi_host_init(intel_dsi, &intel_dsi_host_ops,
1916 port);
1917 if (!host)
1918 goto err;
1919
1920 intel_dsi->dsi_hosts[port] = host;
1921 }
1922
1923 if (!intel_dsi_vbt_init(intel_dsi, MIPI_DSI_GENERIC_PANEL_ID)) {
1924 drm_dbg_kms(&dev_priv->drm, "no device found\n");
1925 goto err;
1926 }
1927
1928 /* Use clock read-back from current hw-state for fastboot */
1929 current_mode = intel_encoder_current_mode(intel_encoder);
1930 if (current_mode) {
1931 drm_dbg_kms(&dev_priv->drm, "Calculated pclk %d GOP %d\n",
1932 intel_dsi->pclk, current_mode->clock);
1933 if (intel_fuzzy_clock_check(intel_dsi->pclk,
1934 current_mode->clock)) {
1935 drm_dbg_kms(&dev_priv->drm, "Using GOP pclk\n");
1936 intel_dsi->pclk = current_mode->clock;
1937 }
1938
1939 kfree(current_mode);
1940 }
1941
1942 vlv_dphy_param_init(intel_dsi);
1943
1944 intel_dsi_vbt_gpio_init(intel_dsi,
1945 intel_dsi_get_hw_state(intel_encoder, &pipe));
1946
1947 drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
1948 DRM_MODE_CONNECTOR_DSI);
1949
1950 drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs);
1951
1952 connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/
1953 connector->interlace_allowed = false;
1954 connector->doublescan_allowed = false;
1955
1956 intel_connector_attach_encoder(intel_connector, intel_encoder);
1957
1958 mutex_lock(&dev->mode_config.mutex);
1959 fixed_mode = intel_panel_vbt_fixed_mode(intel_connector);
1960 mutex_unlock(&dev->mode_config.mutex);
1961
1962 if (!fixed_mode) {
1963 drm_dbg_kms(&dev_priv->drm, "no fixed mode\n");
1964 goto err_cleanup_connector;
1965 }
1966
1967 intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
1968 intel_panel_setup_backlight(connector, INVALID_PIPE);
1969
1970 vlv_dsi_add_properties(intel_connector);
1971
1972 return;
1973
1974err_cleanup_connector:
1975 drm_connector_cleanup(&intel_connector->base);
1976err:
1977 drm_encoder_cleanup(&intel_encoder->base);
1978 kfree(intel_dsi);
1979 kfree(intel_connector);
1980}