Loading...
1/*
2 * platform.c - DesignWare HS OTG Controller platform driver
3 *
4 * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions, and the following disclaimer,
11 * without modification.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. The names of the above-listed copyright holders may not be used
16 * to endorse or promote products derived from this software without
17 * specific prior written permission.
18 *
19 * ALTERNATIVELY, this software may be distributed under the terms of the
20 * GNU General Public License ("GPL") as published by the Free Software
21 * Foundation; either version 2 of the License, or (at your option) any
22 * later version.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
25 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
26 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
27 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
28 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
29 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
30 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
31 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
32 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
33 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
34 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#include <linux/kernel.h>
38#include <linux/module.h>
39#include <linux/slab.h>
40#include <linux/clk.h>
41#include <linux/device.h>
42#include <linux/dma-mapping.h>
43#include <linux/of_device.h>
44#include <linux/mutex.h>
45#include <linux/platform_device.h>
46#include <linux/phy/phy.h>
47#include <linux/platform_data/s3c-hsotg.h>
48
49#include <linux/usb/of.h>
50
51#include "core.h"
52#include "hcd.h"
53#include "debug.h"
54
55static const char dwc2_driver_name[] = "dwc2";
56
57static const struct dwc2_core_params params_hi6220 = {
58 .otg_cap = 2, /* No HNP/SRP capable */
59 .otg_ver = 0, /* 1.3 */
60 .dma_enable = 1,
61 .dma_desc_enable = 0,
62 .dma_desc_fs_enable = 0,
63 .speed = 0, /* High Speed */
64 .enable_dynamic_fifo = 1,
65 .en_multiple_tx_fifo = 1,
66 .host_rx_fifo_size = 512,
67 .host_nperio_tx_fifo_size = 512,
68 .host_perio_tx_fifo_size = 512,
69 .max_transfer_size = 65535,
70 .max_packet_count = 511,
71 .host_channels = 16,
72 .phy_type = 1, /* UTMI */
73 .phy_utmi_width = 8,
74 .phy_ulpi_ddr = 0, /* Single */
75 .phy_ulpi_ext_vbus = 0,
76 .i2c_enable = 0,
77 .ulpi_fs_ls = 0,
78 .host_support_fs_ls_low_power = 0,
79 .host_ls_low_power_phy_clk = 0, /* 48 MHz */
80 .ts_dline = 0,
81 .reload_ctl = 0,
82 .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
83 GAHBCFG_HBSTLEN_SHIFT,
84 .uframe_sched = 0,
85 .external_id_pin_ctl = -1,
86 .hibernation = -1,
87};
88
89static const struct dwc2_core_params params_bcm2835 = {
90 .otg_cap = 0, /* HNP/SRP capable */
91 .otg_ver = 0, /* 1.3 */
92 .dma_enable = 1,
93 .dma_desc_enable = 0,
94 .dma_desc_fs_enable = 0,
95 .speed = 0, /* High Speed */
96 .enable_dynamic_fifo = 1,
97 .en_multiple_tx_fifo = 1,
98 .host_rx_fifo_size = 774, /* 774 DWORDs */
99 .host_nperio_tx_fifo_size = 256, /* 256 DWORDs */
100 .host_perio_tx_fifo_size = 512, /* 512 DWORDs */
101 .max_transfer_size = 65535,
102 .max_packet_count = 511,
103 .host_channels = 8,
104 .phy_type = 1, /* UTMI */
105 .phy_utmi_width = 8, /* 8 bits */
106 .phy_ulpi_ddr = 0, /* Single */
107 .phy_ulpi_ext_vbus = 0,
108 .i2c_enable = 0,
109 .ulpi_fs_ls = 0,
110 .host_support_fs_ls_low_power = 0,
111 .host_ls_low_power_phy_clk = 0, /* 48 MHz */
112 .ts_dline = 0,
113 .reload_ctl = 0,
114 .ahbcfg = 0x10,
115 .uframe_sched = 0,
116 .external_id_pin_ctl = -1,
117 .hibernation = -1,
118};
119
120static const struct dwc2_core_params params_rk3066 = {
121 .otg_cap = 2, /* non-HNP/non-SRP */
122 .otg_ver = -1,
123 .dma_enable = -1,
124 .dma_desc_enable = 0,
125 .dma_desc_fs_enable = 0,
126 .speed = -1,
127 .enable_dynamic_fifo = 1,
128 .en_multiple_tx_fifo = -1,
129 .host_rx_fifo_size = 525, /* 525 DWORDs */
130 .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
131 .host_perio_tx_fifo_size = 256, /* 256 DWORDs */
132 .max_transfer_size = -1,
133 .max_packet_count = -1,
134 .host_channels = -1,
135 .phy_type = -1,
136 .phy_utmi_width = -1,
137 .phy_ulpi_ddr = -1,
138 .phy_ulpi_ext_vbus = -1,
139 .i2c_enable = -1,
140 .ulpi_fs_ls = -1,
141 .host_support_fs_ls_low_power = -1,
142 .host_ls_low_power_phy_clk = -1,
143 .ts_dline = -1,
144 .reload_ctl = -1,
145 .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
146 GAHBCFG_HBSTLEN_SHIFT,
147 .uframe_sched = -1,
148 .external_id_pin_ctl = -1,
149 .hibernation = -1,
150};
151
152static const struct dwc2_core_params params_ltq = {
153 .otg_cap = 2, /* non-HNP/non-SRP */
154 .otg_ver = -1,
155 .dma_enable = -1,
156 .dma_desc_enable = -1,
157 .dma_desc_fs_enable = -1,
158 .speed = -1,
159 .enable_dynamic_fifo = -1,
160 .en_multiple_tx_fifo = -1,
161 .host_rx_fifo_size = 288, /* 288 DWORDs */
162 .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
163 .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
164 .max_transfer_size = 65535,
165 .max_packet_count = 511,
166 .host_channels = -1,
167 .phy_type = -1,
168 .phy_utmi_width = -1,
169 .phy_ulpi_ddr = -1,
170 .phy_ulpi_ext_vbus = -1,
171 .i2c_enable = -1,
172 .ulpi_fs_ls = -1,
173 .host_support_fs_ls_low_power = -1,
174 .host_ls_low_power_phy_clk = -1,
175 .ts_dline = -1,
176 .reload_ctl = -1,
177 .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
178 GAHBCFG_HBSTLEN_SHIFT,
179 .uframe_sched = -1,
180 .external_id_pin_ctl = -1,
181 .hibernation = -1,
182};
183
184/*
185 * Check the dr_mode against the module configuration and hardware
186 * capabilities.
187 *
188 * The hardware, module, and dr_mode, can each be set to host, device,
189 * or otg. Check that all these values are compatible and adjust the
190 * value of dr_mode if possible.
191 *
192 * actual
193 * HW MOD dr_mode dr_mode
194 * ------------------------------
195 * HST HST any : HST
196 * HST DEV any : ---
197 * HST OTG any : HST
198 *
199 * DEV HST any : ---
200 * DEV DEV any : DEV
201 * DEV OTG any : DEV
202 *
203 * OTG HST any : HST
204 * OTG DEV any : DEV
205 * OTG OTG any : dr_mode
206 */
207static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
208{
209 enum usb_dr_mode mode;
210
211 hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
212 if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
213 hsotg->dr_mode = USB_DR_MODE_OTG;
214
215 mode = hsotg->dr_mode;
216
217 if (dwc2_hw_is_device(hsotg)) {
218 if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
219 dev_err(hsotg->dev,
220 "Controller does not support host mode.\n");
221 return -EINVAL;
222 }
223 mode = USB_DR_MODE_PERIPHERAL;
224 } else if (dwc2_hw_is_host(hsotg)) {
225 if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
226 dev_err(hsotg->dev,
227 "Controller does not support device mode.\n");
228 return -EINVAL;
229 }
230 mode = USB_DR_MODE_HOST;
231 } else {
232 if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
233 mode = USB_DR_MODE_HOST;
234 else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
235 mode = USB_DR_MODE_PERIPHERAL;
236 }
237
238 if (mode != hsotg->dr_mode) {
239 dev_warn(hsotg->dev,
240 "Configuration mismatch. dr_mode forced to %s\n",
241 mode == USB_DR_MODE_HOST ? "host" : "device");
242
243 hsotg->dr_mode = mode;
244 }
245
246 return 0;
247}
248
249static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
250{
251 struct platform_device *pdev = to_platform_device(hsotg->dev);
252 int ret;
253
254 ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
255 hsotg->supplies);
256 if (ret)
257 return ret;
258
259 if (hsotg->clk) {
260 ret = clk_prepare_enable(hsotg->clk);
261 if (ret)
262 return ret;
263 }
264
265 if (hsotg->uphy)
266 ret = usb_phy_init(hsotg->uphy);
267 else if (hsotg->plat && hsotg->plat->phy_init)
268 ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
269 else {
270 ret = phy_power_on(hsotg->phy);
271 if (ret == 0)
272 ret = phy_init(hsotg->phy);
273 }
274
275 return ret;
276}
277
278/**
279 * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
280 * @hsotg: The driver state
281 *
282 * A wrapper for platform code responsible for controlling
283 * low-level USB platform resources (phy, clock, regulators)
284 */
285int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
286{
287 int ret = __dwc2_lowlevel_hw_enable(hsotg);
288
289 if (ret == 0)
290 hsotg->ll_hw_enabled = true;
291 return ret;
292}
293
294static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
295{
296 struct platform_device *pdev = to_platform_device(hsotg->dev);
297 int ret = 0;
298
299 if (hsotg->uphy)
300 usb_phy_shutdown(hsotg->uphy);
301 else if (hsotg->plat && hsotg->plat->phy_exit)
302 ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
303 else {
304 ret = phy_exit(hsotg->phy);
305 if (ret == 0)
306 ret = phy_power_off(hsotg->phy);
307 }
308 if (ret)
309 return ret;
310
311 if (hsotg->clk)
312 clk_disable_unprepare(hsotg->clk);
313
314 ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
315 hsotg->supplies);
316
317 return ret;
318}
319
320/**
321 * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
322 * @hsotg: The driver state
323 *
324 * A wrapper for platform code responsible for controlling
325 * low-level USB platform resources (phy, clock, regulators)
326 */
327int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
328{
329 int ret = __dwc2_lowlevel_hw_disable(hsotg);
330
331 if (ret == 0)
332 hsotg->ll_hw_enabled = false;
333 return ret;
334}
335
336static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
337{
338 int i, ret;
339
340 /* Set default UTMI width */
341 hsotg->phyif = GUSBCFG_PHYIF16;
342
343 /*
344 * Attempt to find a generic PHY, then look for an old style
345 * USB PHY and then fall back to pdata
346 */
347 hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
348 if (IS_ERR(hsotg->phy)) {
349 ret = PTR_ERR(hsotg->phy);
350 switch (ret) {
351 case -ENODEV:
352 case -ENOSYS:
353 hsotg->phy = NULL;
354 break;
355 case -EPROBE_DEFER:
356 return ret;
357 default:
358 dev_err(hsotg->dev, "error getting phy %d\n", ret);
359 return ret;
360 }
361 }
362
363 if (!hsotg->phy) {
364 hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
365 if (IS_ERR(hsotg->uphy)) {
366 ret = PTR_ERR(hsotg->uphy);
367 switch (ret) {
368 case -ENODEV:
369 case -ENXIO:
370 hsotg->uphy = NULL;
371 break;
372 case -EPROBE_DEFER:
373 return ret;
374 default:
375 dev_err(hsotg->dev, "error getting usb phy %d\n",
376 ret);
377 return ret;
378 }
379 }
380 }
381
382 hsotg->plat = dev_get_platdata(hsotg->dev);
383
384 if (hsotg->phy) {
385 /*
386 * If using the generic PHY framework, check if the PHY bus
387 * width is 8-bit and set the phyif appropriately.
388 */
389 if (phy_get_bus_width(hsotg->phy) == 8)
390 hsotg->phyif = GUSBCFG_PHYIF8;
391 }
392
393 /* Clock */
394 hsotg->clk = devm_clk_get(hsotg->dev, "otg");
395 if (IS_ERR(hsotg->clk)) {
396 hsotg->clk = NULL;
397 dev_dbg(hsotg->dev, "cannot get otg clock\n");
398 }
399
400 /* Regulators */
401 for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
402 hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
403
404 ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
405 hsotg->supplies);
406 if (ret) {
407 dev_err(hsotg->dev, "failed to request supplies: %d\n", ret);
408 return ret;
409 }
410 return 0;
411}
412
413/**
414 * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
415 * DWC_otg driver
416 *
417 * @dev: Platform device
418 *
419 * This routine is called, for example, when the rmmod command is executed. The
420 * device may or may not be electrically present. If it is present, the driver
421 * stops device processing. Any resources used on behalf of this device are
422 * freed.
423 */
424static int dwc2_driver_remove(struct platform_device *dev)
425{
426 struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
427
428 dwc2_debugfs_exit(hsotg);
429 if (hsotg->hcd_enabled)
430 dwc2_hcd_remove(hsotg);
431 if (hsotg->gadget_enabled)
432 dwc2_hsotg_remove(hsotg);
433
434 if (hsotg->ll_hw_enabled)
435 dwc2_lowlevel_hw_disable(hsotg);
436
437 return 0;
438}
439
440/**
441 * dwc2_driver_shutdown() - Called on device shutdown
442 *
443 * @dev: Platform device
444 *
445 * In specific conditions (involving usb hubs) dwc2 devices can create a
446 * lot of interrupts, even to the point of overwhelming devices running
447 * at low frequencies. Some devices need to do special clock handling
448 * at shutdown-time which may bring the system clock below the threshold
449 * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
450 * prevents reboots/poweroffs from getting stuck in such cases.
451 */
452static void dwc2_driver_shutdown(struct platform_device *dev)
453{
454 struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
455
456 disable_irq(hsotg->irq);
457}
458
459static const struct of_device_id dwc2_of_match_table[] = {
460 { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 },
461 { .compatible = "hisilicon,hi6220-usb", .data = ¶ms_hi6220 },
462 { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 },
463 { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq },
464 { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq },
465 { .compatible = "snps,dwc2", .data = NULL },
466 { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
467 {},
468};
469MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
470
471/**
472 * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
473 * driver
474 *
475 * @dev: Platform device
476 *
477 * This routine creates the driver components required to control the device
478 * (core, HCD, and PCD) and initializes the device. The driver components are
479 * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
480 * in the device private data. This allows the driver to access the dwc2_hsotg
481 * structure on subsequent calls to driver methods for this device.
482 */
483static int dwc2_driver_probe(struct platform_device *dev)
484{
485 const struct of_device_id *match;
486 const struct dwc2_core_params *params;
487 struct dwc2_core_params defparams;
488 struct dwc2_hsotg *hsotg;
489 struct resource *res;
490 int retval;
491
492 match = of_match_device(dwc2_of_match_table, &dev->dev);
493 if (match && match->data) {
494 params = match->data;
495 } else {
496 /* Default all params to autodetect */
497 dwc2_set_all_params(&defparams, -1);
498 params = &defparams;
499
500 /*
501 * Disable descriptor dma mode by default as the HW can support
502 * it, but does not support it for SPLIT transactions.
503 * Disable it for FS devices as well.
504 */
505 defparams.dma_desc_enable = 0;
506 defparams.dma_desc_fs_enable = 0;
507 }
508
509 hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
510 if (!hsotg)
511 return -ENOMEM;
512
513 hsotg->dev = &dev->dev;
514
515 /*
516 * Use reasonable defaults so platforms don't have to provide these.
517 */
518 if (!dev->dev.dma_mask)
519 dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
520 retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
521 if (retval)
522 return retval;
523
524 res = platform_get_resource(dev, IORESOURCE_MEM, 0);
525 hsotg->regs = devm_ioremap_resource(&dev->dev, res);
526 if (IS_ERR(hsotg->regs))
527 return PTR_ERR(hsotg->regs);
528
529 dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
530 (unsigned long)res->start, hsotg->regs);
531
532 retval = dwc2_lowlevel_hw_init(hsotg);
533 if (retval)
534 return retval;
535
536 spin_lock_init(&hsotg->lock);
537
538 hsotg->core_params = devm_kzalloc(&dev->dev,
539 sizeof(*hsotg->core_params), GFP_KERNEL);
540 if (!hsotg->core_params)
541 return -ENOMEM;
542
543 dwc2_set_all_params(hsotg->core_params, -1);
544
545 hsotg->irq = platform_get_irq(dev, 0);
546 if (hsotg->irq < 0) {
547 dev_err(&dev->dev, "missing IRQ resource\n");
548 return hsotg->irq;
549 }
550
551 dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
552 hsotg->irq);
553 retval = devm_request_irq(hsotg->dev, hsotg->irq,
554 dwc2_handle_common_intr, IRQF_SHARED,
555 dev_name(hsotg->dev), hsotg);
556 if (retval)
557 return retval;
558
559 retval = dwc2_lowlevel_hw_enable(hsotg);
560 if (retval)
561 return retval;
562
563 retval = dwc2_get_dr_mode(hsotg);
564 if (retval)
565 return retval;
566
567 /*
568 * Reset before dwc2_get_hwparams() then it could get power-on real
569 * reset value form registers.
570 */
571 dwc2_core_reset_and_force_dr_mode(hsotg);
572
573 /* Detect config values from hardware */
574 retval = dwc2_get_hwparams(hsotg);
575 if (retval)
576 goto error;
577
578 /* Validate parameter values */
579 dwc2_set_parameters(hsotg, params);
580
581 dwc2_force_dr_mode(hsotg);
582
583 if (hsotg->dr_mode != USB_DR_MODE_HOST) {
584 retval = dwc2_gadget_init(hsotg, hsotg->irq);
585 if (retval)
586 goto error;
587 hsotg->gadget_enabled = 1;
588 }
589
590 if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
591 retval = dwc2_hcd_init(hsotg, hsotg->irq);
592 if (retval) {
593 if (hsotg->gadget_enabled)
594 dwc2_hsotg_remove(hsotg);
595 goto error;
596 }
597 hsotg->hcd_enabled = 1;
598 }
599
600 platform_set_drvdata(dev, hsotg);
601
602 dwc2_debugfs_init(hsotg);
603
604 /* Gadget code manages lowlevel hw on its own */
605 if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
606 dwc2_lowlevel_hw_disable(hsotg);
607
608 return 0;
609
610error:
611 dwc2_lowlevel_hw_disable(hsotg);
612 return retval;
613}
614
615static int __maybe_unused dwc2_suspend(struct device *dev)
616{
617 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
618 int ret = 0;
619
620 if (dwc2_is_device_mode(dwc2))
621 dwc2_hsotg_suspend(dwc2);
622
623 if (dwc2->ll_hw_enabled)
624 ret = __dwc2_lowlevel_hw_disable(dwc2);
625
626 return ret;
627}
628
629static int __maybe_unused dwc2_resume(struct device *dev)
630{
631 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
632 int ret = 0;
633
634 if (dwc2->ll_hw_enabled) {
635 ret = __dwc2_lowlevel_hw_enable(dwc2);
636 if (ret)
637 return ret;
638 }
639
640 if (dwc2_is_device_mode(dwc2))
641 ret = dwc2_hsotg_resume(dwc2);
642
643 return ret;
644}
645
646static const struct dev_pm_ops dwc2_dev_pm_ops = {
647 SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
648};
649
650static struct platform_driver dwc2_platform_driver = {
651 .driver = {
652 .name = dwc2_driver_name,
653 .of_match_table = dwc2_of_match_table,
654 .pm = &dwc2_dev_pm_ops,
655 },
656 .probe = dwc2_driver_probe,
657 .remove = dwc2_driver_remove,
658 .shutdown = dwc2_driver_shutdown,
659};
660
661module_platform_driver(dwc2_platform_driver);
662
663MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
664MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
665MODULE_LICENSE("Dual BSD/GPL");
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * platform.c - DesignWare HS OTG Controller platform driver
4 *
5 * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. The names of the above-listed copyright holders may not be used
17 * to endorse or promote products derived from this software without
18 * specific prior written permission.
19 *
20 * ALTERNATIVELY, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") as published by the Free Software
22 * Foundation; either version 2 of the License, or (at your option) any
23 * later version.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 */
37
38#include <linux/kernel.h>
39#include <linux/module.h>
40#include <linux/slab.h>
41#include <linux/clk.h>
42#include <linux/device.h>
43#include <linux/dma-mapping.h>
44#include <linux/of_device.h>
45#include <linux/mutex.h>
46#include <linux/platform_device.h>
47#include <linux/phy/phy.h>
48#include <linux/platform_data/s3c-hsotg.h>
49#include <linux/reset.h>
50
51#include <linux/usb/of.h>
52
53#include "core.h"
54#include "hcd.h"
55#include "debug.h"
56
57static const char dwc2_driver_name[] = "dwc2";
58
59/*
60 * Check the dr_mode against the module configuration and hardware
61 * capabilities.
62 *
63 * The hardware, module, and dr_mode, can each be set to host, device,
64 * or otg. Check that all these values are compatible and adjust the
65 * value of dr_mode if possible.
66 *
67 * actual
68 * HW MOD dr_mode dr_mode
69 * ------------------------------
70 * HST HST any : HST
71 * HST DEV any : ---
72 * HST OTG any : HST
73 *
74 * DEV HST any : ---
75 * DEV DEV any : DEV
76 * DEV OTG any : DEV
77 *
78 * OTG HST any : HST
79 * OTG DEV any : DEV
80 * OTG OTG any : dr_mode
81 */
82static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
83{
84 enum usb_dr_mode mode;
85
86 hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
87 if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
88 hsotg->dr_mode = USB_DR_MODE_OTG;
89
90 mode = hsotg->dr_mode;
91
92 if (dwc2_hw_is_device(hsotg)) {
93 if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
94 dev_err(hsotg->dev,
95 "Controller does not support host mode.\n");
96 return -EINVAL;
97 }
98 mode = USB_DR_MODE_PERIPHERAL;
99 } else if (dwc2_hw_is_host(hsotg)) {
100 if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
101 dev_err(hsotg->dev,
102 "Controller does not support device mode.\n");
103 return -EINVAL;
104 }
105 mode = USB_DR_MODE_HOST;
106 } else {
107 if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
108 mode = USB_DR_MODE_HOST;
109 else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
110 mode = USB_DR_MODE_PERIPHERAL;
111 }
112
113 if (mode != hsotg->dr_mode) {
114 dev_warn(hsotg->dev,
115 "Configuration mismatch. dr_mode forced to %s\n",
116 mode == USB_DR_MODE_HOST ? "host" : "device");
117
118 hsotg->dr_mode = mode;
119 }
120
121 return 0;
122}
123
124static void __dwc2_disable_regulators(void *data)
125{
126 struct dwc2_hsotg *hsotg = data;
127
128 regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
129}
130
131static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
132{
133 struct platform_device *pdev = to_platform_device(hsotg->dev);
134 int ret;
135
136 ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
137 hsotg->supplies);
138 if (ret)
139 return ret;
140
141 ret = devm_add_action_or_reset(&pdev->dev,
142 __dwc2_disable_regulators, hsotg);
143 if (ret)
144 return ret;
145
146 if (hsotg->clk) {
147 ret = clk_prepare_enable(hsotg->clk);
148 if (ret)
149 return ret;
150 }
151
152 if (hsotg->uphy) {
153 ret = usb_phy_init(hsotg->uphy);
154 } else if (hsotg->plat && hsotg->plat->phy_init) {
155 ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
156 } else {
157 ret = phy_power_on(hsotg->phy);
158 if (ret == 0)
159 ret = phy_init(hsotg->phy);
160 }
161
162 return ret;
163}
164
165/**
166 * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
167 * @hsotg: The driver state
168 *
169 * A wrapper for platform code responsible for controlling
170 * low-level USB platform resources (phy, clock, regulators)
171 */
172int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
173{
174 int ret = __dwc2_lowlevel_hw_enable(hsotg);
175
176 if (ret == 0)
177 hsotg->ll_hw_enabled = true;
178 return ret;
179}
180
181static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
182{
183 struct platform_device *pdev = to_platform_device(hsotg->dev);
184 int ret = 0;
185
186 if (hsotg->uphy) {
187 usb_phy_shutdown(hsotg->uphy);
188 } else if (hsotg->plat && hsotg->plat->phy_exit) {
189 ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
190 } else {
191 ret = phy_exit(hsotg->phy);
192 if (ret == 0)
193 ret = phy_power_off(hsotg->phy);
194 }
195 if (ret)
196 return ret;
197
198 if (hsotg->clk)
199 clk_disable_unprepare(hsotg->clk);
200
201 return 0;
202}
203
204/**
205 * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
206 * @hsotg: The driver state
207 *
208 * A wrapper for platform code responsible for controlling
209 * low-level USB platform resources (phy, clock, regulators)
210 */
211int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
212{
213 int ret = __dwc2_lowlevel_hw_disable(hsotg);
214
215 if (ret == 0)
216 hsotg->ll_hw_enabled = false;
217 return ret;
218}
219
220static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
221{
222 int i, ret;
223
224 hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
225 if (IS_ERR(hsotg->reset)) {
226 ret = PTR_ERR(hsotg->reset);
227 dev_err(hsotg->dev, "error getting reset control %d\n", ret);
228 return ret;
229 }
230
231 reset_control_deassert(hsotg->reset);
232
233 hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
234 if (IS_ERR(hsotg->reset_ecc)) {
235 ret = PTR_ERR(hsotg->reset_ecc);
236 dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret);
237 return ret;
238 }
239
240 reset_control_deassert(hsotg->reset_ecc);
241
242 /*
243 * Attempt to find a generic PHY, then look for an old style
244 * USB PHY and then fall back to pdata
245 */
246 hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
247 if (IS_ERR(hsotg->phy)) {
248 ret = PTR_ERR(hsotg->phy);
249 switch (ret) {
250 case -ENODEV:
251 case -ENOSYS:
252 hsotg->phy = NULL;
253 break;
254 case -EPROBE_DEFER:
255 return ret;
256 default:
257 dev_err(hsotg->dev, "error getting phy %d\n", ret);
258 return ret;
259 }
260 }
261
262 if (!hsotg->phy) {
263 hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
264 if (IS_ERR(hsotg->uphy)) {
265 ret = PTR_ERR(hsotg->uphy);
266 switch (ret) {
267 case -ENODEV:
268 case -ENXIO:
269 hsotg->uphy = NULL;
270 break;
271 case -EPROBE_DEFER:
272 return ret;
273 default:
274 dev_err(hsotg->dev, "error getting usb phy %d\n",
275 ret);
276 return ret;
277 }
278 }
279 }
280
281 hsotg->plat = dev_get_platdata(hsotg->dev);
282
283 /* Clock */
284 hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
285 if (IS_ERR(hsotg->clk)) {
286 dev_err(hsotg->dev, "cannot get otg clock\n");
287 return PTR_ERR(hsotg->clk);
288 }
289
290 /* Regulators */
291 for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
292 hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
293
294 ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
295 hsotg->supplies);
296 if (ret) {
297 if (ret != -EPROBE_DEFER)
298 dev_err(hsotg->dev, "failed to request supplies: %d\n",
299 ret);
300 return ret;
301 }
302 return 0;
303}
304
305/**
306 * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
307 * DWC_otg driver
308 *
309 * @dev: Platform device
310 *
311 * This routine is called, for example, when the rmmod command is executed. The
312 * device may or may not be electrically present. If it is present, the driver
313 * stops device processing. Any resources used on behalf of this device are
314 * freed.
315 */
316static int dwc2_driver_remove(struct platform_device *dev)
317{
318 struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
319 struct dwc2_gregs_backup *gr;
320 int ret = 0;
321
322 gr = &hsotg->gr_backup;
323
324 /* Exit Hibernation when driver is removed. */
325 if (hsotg->hibernated) {
326 if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
327 ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
328 else
329 ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
330
331 if (ret)
332 dev_err(hsotg->dev,
333 "exit hibernation failed.\n");
334 }
335
336 /* Exit Partial Power Down when driver is removed. */
337 if (hsotg->in_ppd) {
338 ret = dwc2_exit_partial_power_down(hsotg, 0, true);
339 if (ret)
340 dev_err(hsotg->dev,
341 "exit partial_power_down failed\n");
342 }
343
344 /* Exit clock gating when driver is removed. */
345 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
346 hsotg->bus_suspended) {
347 if (dwc2_is_device_mode(hsotg))
348 dwc2_gadget_exit_clock_gating(hsotg, 0);
349 else
350 dwc2_host_exit_clock_gating(hsotg, 0);
351 }
352
353 dwc2_debugfs_exit(hsotg);
354 if (hsotg->hcd_enabled)
355 dwc2_hcd_remove(hsotg);
356 if (hsotg->gadget_enabled)
357 dwc2_hsotg_remove(hsotg);
358
359 dwc2_drd_exit(hsotg);
360
361 if (hsotg->params.activate_stm_id_vb_detection)
362 regulator_disable(hsotg->usb33d);
363
364 if (hsotg->ll_hw_enabled)
365 dwc2_lowlevel_hw_disable(hsotg);
366
367 reset_control_assert(hsotg->reset);
368 reset_control_assert(hsotg->reset_ecc);
369
370 return ret;
371}
372
373/**
374 * dwc2_driver_shutdown() - Called on device shutdown
375 *
376 * @dev: Platform device
377 *
378 * In specific conditions (involving usb hubs) dwc2 devices can create a
379 * lot of interrupts, even to the point of overwhelming devices running
380 * at low frequencies. Some devices need to do special clock handling
381 * at shutdown-time which may bring the system clock below the threshold
382 * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
383 * prevents reboots/poweroffs from getting stuck in such cases.
384 */
385static void dwc2_driver_shutdown(struct platform_device *dev)
386{
387 struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
388
389 dwc2_disable_global_interrupts(hsotg);
390 synchronize_irq(hsotg->irq);
391}
392
393/**
394 * dwc2_check_core_endianness() - Returns true if core and AHB have
395 * opposite endianness.
396 * @hsotg: Programming view of the DWC_otg controller.
397 */
398static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
399{
400 u32 snpsid;
401
402 snpsid = ioread32(hsotg->regs + GSNPSID);
403 if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
404 (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
405 (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
406 return false;
407 return true;
408}
409
410/**
411 * dwc2_check_core_version() - Check core version
412 *
413 * @hsotg: Programming view of the DWC_otg controller
414 *
415 */
416int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
417{
418 struct dwc2_hw_params *hw = &hsotg->hw_params;
419
420 /*
421 * Attempt to ensure this device is really a DWC_otg Controller.
422 * Read and verify the GSNPSID register contents. The value should be
423 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
424 */
425
426 hw->snpsid = dwc2_readl(hsotg, GSNPSID);
427 if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
428 (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
429 (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
430 dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
431 hw->snpsid);
432 return -ENODEV;
433 }
434
435 dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
436 hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
437 hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
438 return 0;
439}
440
441/**
442 * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
443 * driver
444 *
445 * @dev: Platform device
446 *
447 * This routine creates the driver components required to control the device
448 * (core, HCD, and PCD) and initializes the device. The driver components are
449 * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
450 * in the device private data. This allows the driver to access the dwc2_hsotg
451 * structure on subsequent calls to driver methods for this device.
452 */
453static int dwc2_driver_probe(struct platform_device *dev)
454{
455 struct dwc2_hsotg *hsotg;
456 struct resource *res;
457 int retval;
458
459 hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
460 if (!hsotg)
461 return -ENOMEM;
462
463 hsotg->dev = &dev->dev;
464
465 /*
466 * Use reasonable defaults so platforms don't have to provide these.
467 */
468 if (!dev->dev.dma_mask)
469 dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
470 retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
471 if (retval) {
472 dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
473 return retval;
474 }
475
476 hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
477 if (IS_ERR(hsotg->regs))
478 return PTR_ERR(hsotg->regs);
479
480 dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
481 (unsigned long)res->start, hsotg->regs);
482
483 retval = dwc2_lowlevel_hw_init(hsotg);
484 if (retval)
485 return retval;
486
487 spin_lock_init(&hsotg->lock);
488
489 hsotg->irq = platform_get_irq(dev, 0);
490 if (hsotg->irq < 0)
491 return hsotg->irq;
492
493 dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
494 hsotg->irq);
495 retval = devm_request_irq(hsotg->dev, hsotg->irq,
496 dwc2_handle_common_intr, IRQF_SHARED,
497 dev_name(hsotg->dev), hsotg);
498 if (retval)
499 return retval;
500
501 hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
502 if (IS_ERR(hsotg->vbus_supply)) {
503 retval = PTR_ERR(hsotg->vbus_supply);
504 hsotg->vbus_supply = NULL;
505 if (retval != -ENODEV)
506 return retval;
507 }
508
509 retval = dwc2_lowlevel_hw_enable(hsotg);
510 if (retval)
511 return retval;
512
513 hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
514
515 retval = dwc2_get_dr_mode(hsotg);
516 if (retval)
517 goto error;
518
519 hsotg->need_phy_for_wake =
520 of_property_read_bool(dev->dev.of_node,
521 "snps,need-phy-for-wake");
522
523 /*
524 * Before performing any core related operations
525 * check core version.
526 */
527 retval = dwc2_check_core_version(hsotg);
528 if (retval)
529 goto error;
530
531 /*
532 * Reset before dwc2_get_hwparams() then it could get power-on real
533 * reset value form registers.
534 */
535 retval = dwc2_core_reset(hsotg, false);
536 if (retval)
537 goto error;
538
539 /* Detect config values from hardware */
540 retval = dwc2_get_hwparams(hsotg);
541 if (retval)
542 goto error;
543
544 /*
545 * For OTG cores, set the force mode bits to reflect the value
546 * of dr_mode. Force mode bits should not be touched at any
547 * other time after this.
548 */
549 dwc2_force_dr_mode(hsotg);
550
551 retval = dwc2_init_params(hsotg);
552 if (retval)
553 goto error;
554
555 if (hsotg->params.activate_stm_id_vb_detection) {
556 u32 ggpio;
557
558 hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
559 if (IS_ERR(hsotg->usb33d)) {
560 retval = PTR_ERR(hsotg->usb33d);
561 if (retval != -EPROBE_DEFER)
562 dev_err(hsotg->dev,
563 "failed to request usb33d supply: %d\n",
564 retval);
565 goto error;
566 }
567 retval = regulator_enable(hsotg->usb33d);
568 if (retval) {
569 dev_err(hsotg->dev,
570 "failed to enable usb33d supply: %d\n", retval);
571 goto error;
572 }
573
574 ggpio = dwc2_readl(hsotg, GGPIO);
575 ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
576 ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
577 dwc2_writel(hsotg, ggpio, GGPIO);
578 }
579
580 retval = dwc2_drd_init(hsotg);
581 if (retval) {
582 if (retval != -EPROBE_DEFER)
583 dev_err(hsotg->dev, "failed to initialize dual-role\n");
584 goto error_init;
585 }
586
587 if (hsotg->dr_mode != USB_DR_MODE_HOST) {
588 retval = dwc2_gadget_init(hsotg);
589 if (retval)
590 goto error_drd;
591 hsotg->gadget_enabled = 1;
592 }
593
594 /*
595 * If we need PHY for wakeup we must be wakeup capable.
596 * When we have a device that can wake without the PHY we
597 * can adjust this condition.
598 */
599 if (hsotg->need_phy_for_wake)
600 device_set_wakeup_capable(&dev->dev, true);
601
602 hsotg->reset_phy_on_wake =
603 of_property_read_bool(dev->dev.of_node,
604 "snps,reset-phy-on-wake");
605 if (hsotg->reset_phy_on_wake && !hsotg->phy) {
606 dev_warn(hsotg->dev,
607 "Quirk reset-phy-on-wake only supports generic PHYs\n");
608 hsotg->reset_phy_on_wake = false;
609 }
610
611 if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
612 retval = dwc2_hcd_init(hsotg);
613 if (retval) {
614 if (hsotg->gadget_enabled)
615 dwc2_hsotg_remove(hsotg);
616 goto error_drd;
617 }
618 hsotg->hcd_enabled = 1;
619 }
620
621 platform_set_drvdata(dev, hsotg);
622 hsotg->hibernated = 0;
623
624 dwc2_debugfs_init(hsotg);
625
626 /* Gadget code manages lowlevel hw on its own */
627 if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
628 dwc2_lowlevel_hw_disable(hsotg);
629
630#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
631 IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
632 /* Postponed adding a new gadget to the udc class driver list */
633 if (hsotg->gadget_enabled) {
634 retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
635 if (retval) {
636 hsotg->gadget.udc = NULL;
637 dwc2_hsotg_remove(hsotg);
638 goto error_debugfs;
639 }
640 }
641#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
642 return 0;
643
644#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
645 IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
646error_debugfs:
647 dwc2_debugfs_exit(hsotg);
648 if (hsotg->hcd_enabled)
649 dwc2_hcd_remove(hsotg);
650#endif
651error_drd:
652 dwc2_drd_exit(hsotg);
653
654error_init:
655 if (hsotg->params.activate_stm_id_vb_detection)
656 regulator_disable(hsotg->usb33d);
657error:
658 if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL)
659 dwc2_lowlevel_hw_disable(hsotg);
660 return retval;
661}
662
663static int __maybe_unused dwc2_suspend(struct device *dev)
664{
665 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
666 bool is_device_mode = dwc2_is_device_mode(dwc2);
667 int ret = 0;
668
669 if (is_device_mode)
670 dwc2_hsotg_suspend(dwc2);
671
672 dwc2_drd_suspend(dwc2);
673
674 if (dwc2->params.activate_stm_id_vb_detection) {
675 unsigned long flags;
676 u32 ggpio, gotgctl;
677
678 /*
679 * Need to force the mode to the current mode to avoid Mode
680 * Mismatch Interrupt when ID detection will be disabled.
681 */
682 dwc2_force_mode(dwc2, !is_device_mode);
683
684 spin_lock_irqsave(&dwc2->lock, flags);
685 gotgctl = dwc2_readl(dwc2, GOTGCTL);
686 /* bypass debounce filter, enable overrides */
687 gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
688 gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
689 /* Force A / B session if needed */
690 if (gotgctl & GOTGCTL_ASESVLD)
691 gotgctl |= GOTGCTL_AVALOVAL;
692 if (gotgctl & GOTGCTL_BSESVLD)
693 gotgctl |= GOTGCTL_BVALOVAL;
694 dwc2_writel(dwc2, gotgctl, GOTGCTL);
695 spin_unlock_irqrestore(&dwc2->lock, flags);
696
697 ggpio = dwc2_readl(dwc2, GGPIO);
698 ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
699 ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
700 dwc2_writel(dwc2, ggpio, GGPIO);
701
702 regulator_disable(dwc2->usb33d);
703 }
704
705 if (dwc2->ll_hw_enabled &&
706 (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
707 ret = __dwc2_lowlevel_hw_disable(dwc2);
708 dwc2->phy_off_for_suspend = true;
709 }
710
711 return ret;
712}
713
714static int __maybe_unused dwc2_resume(struct device *dev)
715{
716 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
717 int ret = 0;
718
719 if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
720 ret = __dwc2_lowlevel_hw_enable(dwc2);
721 if (ret)
722 return ret;
723 }
724 dwc2->phy_off_for_suspend = false;
725
726 if (dwc2->params.activate_stm_id_vb_detection) {
727 unsigned long flags;
728 u32 ggpio, gotgctl;
729
730 ret = regulator_enable(dwc2->usb33d);
731 if (ret)
732 return ret;
733
734 ggpio = dwc2_readl(dwc2, GGPIO);
735 ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
736 ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
737 dwc2_writel(dwc2, ggpio, GGPIO);
738
739 /* ID/VBUS detection startup time */
740 usleep_range(5000, 7000);
741
742 spin_lock_irqsave(&dwc2->lock, flags);
743 gotgctl = dwc2_readl(dwc2, GOTGCTL);
744 gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
745 gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
746 GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
747 dwc2_writel(dwc2, gotgctl, GOTGCTL);
748 spin_unlock_irqrestore(&dwc2->lock, flags);
749 }
750
751 /* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
752 dwc2_force_dr_mode(dwc2);
753
754 dwc2_drd_resume(dwc2);
755
756 if (dwc2_is_device_mode(dwc2))
757 ret = dwc2_hsotg_resume(dwc2);
758
759 return ret;
760}
761
762static const struct dev_pm_ops dwc2_dev_pm_ops = {
763 SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
764};
765
766static struct platform_driver dwc2_platform_driver = {
767 .driver = {
768 .name = dwc2_driver_name,
769 .of_match_table = dwc2_of_match_table,
770 .acpi_match_table = ACPI_PTR(dwc2_acpi_match),
771 .pm = &dwc2_dev_pm_ops,
772 },
773 .probe = dwc2_driver_probe,
774 .remove = dwc2_driver_remove,
775 .shutdown = dwc2_driver_shutdown,
776};
777
778module_platform_driver(dwc2_platform_driver);