Loading...
1#
2# RTC class/drivers configuration
3#
4
5config RTC_LIB
6 bool
7
8menuconfig RTC_CLASS
9 bool "Real Time Clock"
10 default n
11 depends on !S390 && !UML
12 select RTC_LIB
13 help
14 Generic RTC class support. If you say yes here, you will
15 be allowed to plug one or more RTCs to your system. You will
16 probably want to enable one or more of the interfaces below.
17
18if RTC_CLASS
19
20config RTC_HCTOSYS
21 bool "Set system time from RTC on startup and resume"
22 default y
23 help
24 If you say yes here, the system time (wall clock) will be set using
25 the value read from a specified RTC device. This is useful to avoid
26 unnecessary fsck runs at boot time, and to network better.
27
28config RTC_HCTOSYS_DEVICE
29 string "RTC used to set the system time"
30 depends on RTC_HCTOSYS
31 default "rtc0"
32 help
33 The RTC device that will be used to (re)initialize the system
34 clock, usually rtc0. Initialization is done when the system
35 starts up, and when it resumes from a low power state. This
36 device should record time in UTC, since the kernel won't do
37 timezone correction.
38
39 The driver for this RTC device must be loaded before late_initcall
40 functions run, so it must usually be statically linked.
41
42 This clock should be battery-backed, so that it reads the correct
43 time when the system boots from a power-off state. Otherwise, your
44 system will need an external clock source (like an NTP server).
45
46 If the clock you specify here is not battery backed, it may still
47 be useful to reinitialize system time when resuming from system
48 sleep states. Do not specify an RTC here unless it stays powered
49 during all this system's supported sleep states.
50
51config RTC_SYSTOHC
52 bool "Set the RTC time based on NTP synchronization"
53 default y
54 help
55 If you say yes here, the system time (wall clock) will be stored
56 in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11
57 minutes if userspace reports synchronized NTP status.
58
59config RTC_SYSTOHC_DEVICE
60 string "RTC used to synchronize NTP adjustment"
61 depends on RTC_SYSTOHC
62 default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
63 default "rtc0"
64 help
65 The RTC device used for NTP synchronization. The main difference
66 between RTC_HCTOSYS_DEVICE and RTC_SYSTOHC_DEVICE is that this
67 one can sleep when setting time, because it runs in the workqueue
68 context.
69
70config RTC_DEBUG
71 bool "RTC debug support"
72 help
73 Say yes here to enable debugging support in the RTC framework
74 and individual RTC drivers.
75
76comment "RTC interfaces"
77
78config RTC_INTF_SYSFS
79 bool "/sys/class/rtc/rtcN (sysfs)"
80 depends on SYSFS
81 default RTC_CLASS
82 help
83 Say yes here if you want to use your RTCs using sysfs interfaces,
84 /sys/class/rtc/rtc0 through /sys/.../rtcN.
85
86 If unsure, say Y.
87
88config RTC_INTF_PROC
89 bool "/proc/driver/rtc (procfs for rtcN)"
90 depends on PROC_FS
91 default RTC_CLASS
92 help
93 Say yes here if you want to use your system clock RTC through
94 the proc interface, /proc/driver/rtc.
95 Other RTCs will not be available through that API.
96 If there is no RTC for the system clock, then the first RTC(rtc0)
97 is used by default.
98
99 If unsure, say Y.
100
101config RTC_INTF_DEV
102 bool "/dev/rtcN (character devices)"
103 default RTC_CLASS
104 help
105 Say yes here if you want to use your RTCs using the /dev
106 interfaces, which "udev" sets up as /dev/rtc0 through
107 /dev/rtcN.
108
109 You may want to set up a symbolic link so one of these
110 can be accessed as /dev/rtc, which is a name
111 expected by "hwclock" and some other programs. Recent
112 versions of "udev" are known to set up the symlink for you.
113
114 If unsure, say Y.
115
116config RTC_INTF_DEV_UIE_EMUL
117 bool "RTC UIE emulation on dev interface"
118 depends on RTC_INTF_DEV
119 help
120 Provides an emulation for RTC_UIE if the underlying rtc chip
121 driver does not expose RTC_UIE ioctls. Those requests generate
122 once-per-second update interrupts, used for synchronization.
123
124 The emulation code will read the time from the hardware
125 clock several times per second, please enable this option
126 only if you know that you really need it.
127
128config RTC_DRV_TEST
129 tristate "Test driver/device"
130 help
131 If you say yes here you get support for the
132 RTC test driver. It's a software RTC which can be
133 used to test the RTC subsystem APIs. It gets
134 the time from the system clock.
135 You want this driver only if you are doing development
136 on the RTC subsystem. Please read the source code
137 for further details.
138
139 This driver can also be built as a module. If so, the module
140 will be called rtc-test.
141
142comment "I2C RTC drivers"
143
144if I2C
145
146config RTC_DRV_88PM860X
147 tristate "Marvell 88PM860x"
148 depends on MFD_88PM860X
149 help
150 If you say yes here you get support for RTC function in Marvell
151 88PM860x chips.
152
153 This driver can also be built as a module. If so, the module
154 will be called rtc-88pm860x.
155
156config RTC_DRV_88PM80X
157 tristate "Marvell 88PM80x"
158 depends on MFD_88PM800
159 help
160 If you say yes here you get support for RTC function in Marvell
161 88PM80x chips.
162
163 This driver can also be built as a module. If so, the module
164 will be called rtc-88pm80x.
165
166config RTC_DRV_ABB5ZES3
167 select REGMAP_I2C
168 tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
169 help
170 If you say yes here you get support for the Abracon
171 AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
172
173 This driver can also be built as a module. If so, the module
174 will be called rtc-ab-b5ze-s3.
175
176config RTC_DRV_ABX80X
177 tristate "Abracon ABx80x"
178 help
179 If you say yes here you get support for Abracon AB080X and AB180X
180 families of ultra-low-power battery- and capacitor-backed real-time
181 clock chips.
182
183 This driver can also be built as a module. If so, the module
184 will be called rtc-abx80x.
185
186config RTC_DRV_AS3722
187 tristate "ams AS3722 RTC driver"
188 depends on MFD_AS3722
189 help
190 If you say yes here you get support for the RTC of ams AS3722 PMIC
191 chips.
192
193 This driver can also be built as a module. If so, the module
194 will be called rtc-as3722.
195
196config RTC_DRV_DS1307
197 tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00, EPSON RX-8025"
198 help
199 If you say yes here you get support for various compatible RTC
200 chips (often with battery backup) connected with I2C. This driver
201 should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00,
202 EPSON RX-8025 and probably other chips. In some cases the RTC
203 must already have been initialized (by manufacturing or a
204 bootloader).
205
206 The first seven registers on these chips hold an RTC, and other
207 registers may add features such as NVRAM, a trickle charger for
208 the RTC/NVRAM backup power, and alarms. NVRAM is visible in
209 sysfs, but other chip features may not be available.
210
211 This driver can also be built as a module. If so, the module
212 will be called rtc-ds1307.
213
214config RTC_DRV_DS1307_HWMON
215 bool "HWMON support for rtc-ds1307"
216 depends on RTC_DRV_DS1307 && HWMON
217 depends on !(RTC_DRV_DS1307=y && HWMON=m)
218 default y
219 help
220 Say Y here if you want to expose temperature sensor data on
221 rtc-ds1307 (only DS3231)
222
223config RTC_DRV_DS1374
224 tristate "Dallas/Maxim DS1374"
225 help
226 If you say yes here you get support for Dallas Semiconductor
227 DS1374 real-time clock chips. If an interrupt is associated
228 with the device, the alarm functionality is supported.
229
230 This driver can also be built as a module. If so, the module
231 will be called rtc-ds1374.
232
233config RTC_DRV_DS1374_WDT
234 bool "Dallas/Maxim DS1374 watchdog timer"
235 depends on RTC_DRV_DS1374
236 help
237 If you say Y here you will get support for the
238 watchdog timer in the Dallas Semiconductor DS1374
239 real-time clock chips.
240
241config RTC_DRV_DS1672
242 tristate "Dallas/Maxim DS1672"
243 help
244 If you say yes here you get support for the
245 Dallas/Maxim DS1672 timekeeping chip.
246
247 This driver can also be built as a module. If so, the module
248 will be called rtc-ds1672.
249
250config RTC_DRV_HYM8563
251 tristate "Haoyu Microelectronics HYM8563"
252 depends on OF
253 help
254 Say Y to enable support for the HYM8563 I2C RTC chip. Apart
255 from the usual rtc functions it provides a clock output of
256 up to 32kHz.
257
258 This driver can also be built as a module. If so, the module
259 will be called rtc-hym8563.
260
261config RTC_DRV_LP8788
262 tristate "TI LP8788 RTC driver"
263 depends on MFD_LP8788
264 help
265 Say Y to enable support for the LP8788 RTC/ALARM driver.
266
267config RTC_DRV_MAX6900
268 tristate "Maxim MAX6900"
269 help
270 If you say yes here you will get support for the
271 Maxim MAX6900 I2C RTC chip.
272
273 This driver can also be built as a module. If so, the module
274 will be called rtc-max6900.
275
276config RTC_DRV_MAX8907
277 tristate "Maxim MAX8907"
278 depends on MFD_MAX8907
279 help
280 If you say yes here you will get support for the
281 RTC of Maxim MAX8907 PMIC.
282
283 This driver can also be built as a module. If so, the module
284 will be called rtc-max8907.
285
286config RTC_DRV_MAX8925
287 tristate "Maxim MAX8925"
288 depends on MFD_MAX8925
289 help
290 If you say yes here you will get support for the
291 RTC of Maxim MAX8925 PMIC.
292
293 This driver can also be built as a module. If so, the module
294 will be called rtc-max8925.
295
296config RTC_DRV_MAX8998
297 tristate "Maxim MAX8998"
298 depends on MFD_MAX8998
299 help
300 If you say yes here you will get support for the
301 RTC of Maxim MAX8998 PMIC.
302
303 This driver can also be built as a module. If so, the module
304 will be called rtc-max8998.
305
306config RTC_DRV_MAX8997
307 tristate "Maxim MAX8997"
308 depends on MFD_MAX8997
309 help
310 If you say yes here you will get support for the
311 RTC of Maxim MAX8997 PMIC.
312
313 This driver can also be built as a module. If so, the module
314 will be called rtc-max8997.
315
316config RTC_DRV_MAX77686
317 tristate "Maxim MAX77686"
318 depends on MFD_MAX77686 || MFD_MAX77620
319 help
320 If you say yes here you will get support for the
321 RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
322
323 This driver can also be built as a module. If so, the module
324 will be called rtc-max77686.
325
326config RTC_DRV_RK808
327 tristate "Rockchip RK808 RTC"
328 depends on MFD_RK808
329 help
330 If you say yes here you will get support for the
331 RTC of RK808 PMIC.
332
333 This driver can also be built as a module. If so, the module
334 will be called rk808-rtc.
335
336config RTC_DRV_RS5C372
337 tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
338 help
339 If you say yes here you get support for the
340 Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
341
342 This driver can also be built as a module. If so, the module
343 will be called rtc-rs5c372.
344
345config RTC_DRV_ISL1208
346 tristate "Intersil ISL1208"
347 help
348 If you say yes here you get support for the
349 Intersil ISL1208 RTC chip.
350
351 This driver can also be built as a module. If so, the module
352 will be called rtc-isl1208.
353
354config RTC_DRV_ISL12022
355 tristate "Intersil ISL12022"
356 help
357 If you say yes here you get support for the
358 Intersil ISL12022 RTC chip.
359
360 This driver can also be built as a module. If so, the module
361 will be called rtc-isl12022.
362
363config RTC_DRV_ISL12057
364 select REGMAP_I2C
365 tristate "Intersil ISL12057"
366 help
367 If you say yes here you get support for the Intersil ISL12057
368 I2C RTC chip.
369
370 This driver can also be built as a module. If so, the module
371 will be called rtc-isl12057.
372
373config RTC_DRV_X1205
374 tristate "Xicor/Intersil X1205"
375 help
376 If you say yes here you get support for the
377 Xicor/Intersil X1205 RTC chip.
378
379 This driver can also be built as a module. If so, the module
380 will be called rtc-x1205.
381
382config RTC_DRV_PCF8523
383 tristate "NXP PCF8523"
384 help
385 If you say yes here you get support for the NXP PCF8523 RTC
386 chips.
387
388 This driver can also be built as a module. If so, the module
389 will be called rtc-pcf8523.
390
391config RTC_DRV_PCF85063
392 tristate "NXP PCF85063"
393 help
394 If you say yes here you get support for the PCF85063 RTC chip
395
396 This driver can also be built as a module. If so, the module
397 will be called rtc-pcf85063.
398
399config RTC_DRV_PCF8563
400 tristate "Philips PCF8563/Epson RTC8564"
401 help
402 If you say yes here you get support for the
403 Philips PCF8563 RTC chip. The Epson RTC8564
404 should work as well.
405
406 This driver can also be built as a module. If so, the module
407 will be called rtc-pcf8563.
408
409config RTC_DRV_PCF8583
410 tristate "Philips PCF8583"
411 help
412 If you say yes here you get support for the Philips PCF8583
413 RTC chip found on Acorn RiscPCs. This driver supports the
414 platform specific method of retrieving the current year from
415 the RTC's SRAM. It will work on other platforms with the same
416 chip, but the year will probably have to be tweaked.
417
418 This driver can also be built as a module. If so, the module
419 will be called rtc-pcf8583.
420
421config RTC_DRV_M41T80
422 tristate "ST M41T62/65/M41T80/81/82/83/84/85/87 and compatible"
423 help
424 If you say Y here you will get support for the ST M41T60
425 and M41T80 RTC chips series. Currently, the following chips are
426 supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
427 M41ST85, M41ST87, and MicroCrystal RV4162.
428
429 This driver can also be built as a module. If so, the module
430 will be called rtc-m41t80.
431
432config RTC_DRV_M41T80_WDT
433 bool "ST M41T65/M41T80 series RTC watchdog timer"
434 depends on RTC_DRV_M41T80
435 help
436 If you say Y here you will get support for the
437 watchdog timer in the ST M41T60 and M41T80 RTC chips series.
438
439config RTC_DRV_BQ32K
440 tristate "TI BQ32000"
441 help
442 If you say Y here you will get support for the TI
443 BQ32000 I2C RTC chip.
444
445 This driver can also be built as a module. If so, the module
446 will be called rtc-bq32k.
447
448config RTC_DRV_DM355EVM
449 tristate "TI DaVinci DM355 EVM RTC"
450 depends on MFD_DM355EVM_MSP
451 help
452 Supports the RTC firmware in the MSP430 on the DM355 EVM.
453
454config RTC_DRV_TWL92330
455 bool "TI TWL92330/Menelaus"
456 depends on MENELAUS
457 help
458 If you say yes here you get support for the RTC on the
459 TWL92330 "Menelaus" power management chip, used with OMAP2
460 platforms. The support is integrated with the rest of
461 the Menelaus driver; it's not separate module.
462
463config RTC_DRV_TWL4030
464 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
465 depends on TWL4030_CORE
466 help
467 If you say yes here you get support for the RTC on the
468 TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
469
470 This driver can also be built as a module. If so, the module
471 will be called rtc-twl.
472
473config RTC_DRV_PALMAS
474 tristate "TI Palmas RTC driver"
475 depends on MFD_PALMAS
476 help
477 If you say yes here you get support for the RTC of TI PALMA series PMIC
478 chips.
479
480 This driver can also be built as a module. If so, the module
481 will be called rtc-palma.
482
483config RTC_DRV_TPS6586X
484 tristate "TI TPS6586X RTC driver"
485 depends on MFD_TPS6586X
486 help
487 TI Power Management IC TPS6586X supports RTC functionality
488 along with alarm. This driver supports the RTC driver for
489 the TPS6586X RTC module.
490
491config RTC_DRV_TPS65910
492 tristate "TI TPS65910 RTC driver"
493 depends on RTC_CLASS && MFD_TPS65910
494 help
495 If you say yes here you get support for the RTC on the
496 TPS65910 chips.
497
498 This driver can also be built as a module. If so, the module
499 will be called rtc-tps65910.
500
501config RTC_DRV_TPS80031
502 tristate "TI TPS80031/TPS80032 RTC driver"
503 depends on MFD_TPS80031
504 help
505 TI Power Management IC TPS80031 supports RTC functionality
506 along with alarm. This driver supports the RTC driver for
507 the TPS80031 RTC module.
508
509config RTC_DRV_RC5T583
510 tristate "RICOH 5T583 RTC driver"
511 depends on MFD_RC5T583
512 help
513 If you say yes here you get support for the RTC on the
514 RICOH 5T583 chips.
515
516 This driver can also be built as a module. If so, the module
517 will be called rtc-rc5t583.
518
519config RTC_DRV_S35390A
520 tristate "Seiko Instruments S-35390A"
521 select BITREVERSE
522 help
523 If you say yes here you will get support for the Seiko
524 Instruments S-35390A.
525
526 This driver can also be built as a module. If so the module
527 will be called rtc-s35390a.
528
529config RTC_DRV_FM3130
530 tristate "Ramtron FM3130"
531 help
532 If you say Y here you will get support for the
533 Ramtron FM3130 RTC chips.
534 Ramtron FM3130 is a chip with two separate devices inside,
535 RTC clock and FRAM. This driver provides only RTC functionality.
536
537 This driver can also be built as a module. If so the module
538 will be called rtc-fm3130.
539
540config RTC_DRV_RX8010
541 tristate "Epson RX8010SJ"
542 depends on I2C
543 help
544 If you say yes here you get support for the Epson RX8010SJ RTC
545 chip.
546
547 This driver can also be built as a module. If so, the module
548 will be called rtc-rx8010.
549
550config RTC_DRV_RX8581
551 tristate "Epson RX-8581"
552 help
553 If you say yes here you will get support for the Epson RX-8581.
554
555 This driver can also be built as a module. If so the module
556 will be called rtc-rx8581.
557
558config RTC_DRV_RX8025
559 tristate "Epson RX-8025SA/NB"
560 help
561 If you say yes here you get support for the Epson
562 RX-8025SA/NB RTC chips.
563
564 This driver can also be built as a module. If so, the module
565 will be called rtc-rx8025.
566
567config RTC_DRV_EM3027
568 tristate "EM Microelectronic EM3027"
569 help
570 If you say yes here you get support for the EM
571 Microelectronic EM3027 RTC chips.
572
573 This driver can also be built as a module. If so, the module
574 will be called rtc-em3027.
575
576config RTC_DRV_RV3029C2
577 tristate "Micro Crystal RV3029"
578 help
579 If you say yes here you get support for the Micro Crystal
580 RV3029 RTC chips.
581
582 This driver can also be built as a module. If so, the module
583 will be called rtc-rv3029c2.
584
585config RTC_DRV_RV3029_HWMON
586 bool "HWMON support for RV3029"
587 depends on RTC_DRV_RV3029C2 && HWMON
588 depends on !(RTC_DRV_RV3029C2=y && HWMON=m)
589 default y
590 help
591 Say Y here if you want to expose temperature sensor data on
592 rtc-rv3029.
593
594config RTC_DRV_RV8803
595 tristate "Micro Crystal RV8803"
596 help
597 If you say yes here you get support for the Micro Crystal
598 RV8803 RTC chips.
599
600 This driver can also be built as a module. If so, the module
601 will be called rtc-rv8803.
602
603config RTC_DRV_S5M
604 tristate "Samsung S2M/S5M series"
605 depends on MFD_SEC_CORE
606 help
607 If you say yes here you will get support for the
608 RTC of Samsung S2MPS14 and S5M PMIC series.
609
610 This driver can also be built as a module. If so, the module
611 will be called rtc-s5m.
612
613endif # I2C
614
615comment "SPI RTC drivers"
616
617if SPI_MASTER
618
619config RTC_DRV_M41T93
620 tristate "ST M41T93"
621 help
622 If you say yes here you will get support for the
623 ST M41T93 SPI RTC chip.
624
625 This driver can also be built as a module. If so, the module
626 will be called rtc-m41t93.
627
628config RTC_DRV_M41T94
629 tristate "ST M41T94"
630 help
631 If you say yes here you will get support for the
632 ST M41T94 SPI RTC chip.
633
634 This driver can also be built as a module. If so, the module
635 will be called rtc-m41t94.
636
637config RTC_DRV_DS1305
638 tristate "Dallas/Maxim DS1305/DS1306"
639 help
640 Select this driver to get support for the Dallas/Maxim DS1305
641 and DS1306 real time clock chips. These support a trickle
642 charger, alarms, and NVRAM in addition to the clock.
643
644 This driver can also be built as a module. If so, the module
645 will be called rtc-ds1305.
646
647config RTC_DRV_DS1343
648 select REGMAP_SPI
649 tristate "Dallas/Maxim DS1343/DS1344"
650 help
651 If you say yes here you get support for the
652 Dallas/Maxim DS1343 and DS1344 real time clock chips.
653 Support for trickle charger, alarm is provided.
654
655 This driver can also be built as a module. If so, the module
656 will be called rtc-ds1343.
657
658config RTC_DRV_DS1347
659 tristate "Dallas/Maxim DS1347"
660 help
661 If you say yes here you get support for the
662 Dallas/Maxim DS1347 chips.
663
664 This driver only supports the RTC feature, and not other chip
665 features such as alarms.
666
667 This driver can also be built as a module. If so, the module
668 will be called rtc-ds1347.
669
670config RTC_DRV_DS1390
671 tristate "Dallas/Maxim DS1390/93/94"
672 help
673 If you say yes here you get support for the
674 Dallas/Maxim DS1390/93/94 chips.
675
676 This driver supports the RTC feature and trickle charging but not
677 other chip features such as alarms.
678
679 This driver can also be built as a module. If so, the module
680 will be called rtc-ds1390.
681
682config RTC_DRV_R9701
683 tristate "Epson RTC-9701JE"
684 help
685 If you say yes here you will get support for the
686 Epson RTC-9701JE SPI RTC chip.
687
688 This driver can also be built as a module. If so, the module
689 will be called rtc-r9701.
690
691config RTC_DRV_RX4581
692 tristate "Epson RX-4581"
693 help
694 If you say yes here you will get support for the Epson RX-4581.
695
696 This driver can also be built as a module. If so the module
697 will be called rtc-rx4581.
698
699config RTC_DRV_RX6110
700 tristate "Epson RX-6110"
701 select REGMAP_SPI
702 help
703 If you say yes here you will get support for the Epson RX-6610.
704
705 This driver can also be built as a module. If so the module
706 will be called rtc-rx6110.
707
708config RTC_DRV_RS5C348
709 tristate "Ricoh RS5C348A/B"
710 help
711 If you say yes here you get support for the
712 Ricoh RS5C348A and RS5C348B RTC chips.
713
714 This driver can also be built as a module. If so, the module
715 will be called rtc-rs5c348.
716
717config RTC_DRV_MAX6902
718 tristate "Maxim MAX6902"
719 help
720 If you say yes here you will get support for the
721 Maxim MAX6902 SPI RTC chip.
722
723 This driver can also be built as a module. If so, the module
724 will be called rtc-max6902.
725
726config RTC_DRV_PCF2123
727 tristate "NXP PCF2123"
728 help
729 If you say yes here you get support for the NXP PCF2123
730 RTC chip.
731
732 This driver can also be built as a module. If so, the module
733 will be called rtc-pcf2123.
734
735config RTC_DRV_MCP795
736 tristate "Microchip MCP795"
737 help
738 If you say yes here you will get support for the Microchip MCP795.
739
740 This driver can also be built as a module. If so the module
741 will be called rtc-mcp795.
742
743endif # SPI_MASTER
744
745#
746# Helper to resolve issues with configs that have SPI enabled but I2C
747# modular. See SND_SOC_I2C_AND_SPI for more information
748#
749config RTC_I2C_AND_SPI
750 tristate
751 default m if I2C=m
752 default y if I2C=y
753 default y if SPI_MASTER=y
754 select REGMAP_I2C if I2C
755 select REGMAP_SPI if SPI_MASTER
756
757comment "SPI and I2C RTC drivers"
758
759config RTC_DRV_DS3232
760 tristate "Dallas/Maxim DS3232/DS3234"
761 depends on RTC_I2C_AND_SPI
762 help
763 If you say yes here you get support for Dallas Semiconductor
764 DS3232 and DS3234 real-time clock chips. If an interrupt is associated
765 with the device, the alarm functionality is supported.
766
767 This driver can also be built as a module. If so, the module
768 will be called rtc-ds3232.
769
770config RTC_DRV_PCF2127
771 tristate "NXP PCF2127"
772 depends on RTC_I2C_AND_SPI
773 help
774 If you say yes here you get support for the NXP PCF2127/29 RTC
775 chips.
776
777 This driver can also be built as a module. If so, the module
778 will be called rtc-pcf2127.
779
780comment "Platform RTC drivers"
781
782# this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h>
783# requires <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
784# global rtc_lock ... it's not yet just another platform_device.
785
786config RTC_DRV_CMOS
787 tristate "PC-style 'CMOS'"
788 depends on X86 || ARM || M32R || PPC || MIPS || SPARC64
789 default y if X86
790 help
791 Say "yes" here to get direct support for the real time clock
792 found in every PC or ACPI-based system, and some other boards.
793 Specifically the original MC146818, compatibles like those in
794 PC south bridges, the DS12887 or M48T86, some multifunction
795 or LPC bus chips, and so on.
796
797 Your system will need to define the platform device used by
798 this driver, otherwise it won't be accessible. This means
799 you can safely enable this driver if you don't know whether
800 or not your board has this kind of hardware.
801
802 This driver can also be built as a module. If so, the module
803 will be called rtc-cmos.
804
805config RTC_DRV_ALPHA
806 bool "Alpha PC-style CMOS"
807 depends on ALPHA
808 default y
809 help
810 Direct support for the real-time clock found on every Alpha
811 system, specifically MC146818 compatibles. If in doubt, say Y.
812
813config RTC_DRV_VRTC
814 tristate "Virtual RTC for Intel MID platforms"
815 depends on X86_INTEL_MID
816 default y if X86_INTEL_MID
817
818 help
819 Say "yes" here to get direct support for the real time clock
820 found on Moorestown platforms. The VRTC is a emulated RTC that
821 derives its clock source from a real RTC in the PMIC. The MC146818
822 style programming interface is mostly conserved, but any
823 updates are done via IPC calls to the system controller FW.
824
825config RTC_DRV_DS1216
826 tristate "Dallas DS1216"
827 depends on SNI_RM
828 help
829 If you say yes here you get support for the Dallas DS1216 RTC chips.
830
831config RTC_DRV_DS1286
832 tristate "Dallas DS1286"
833 depends on HAS_IOMEM
834 help
835 If you say yes here you get support for the Dallas DS1286 RTC chips.
836
837config RTC_DRV_DS1302
838 tristate "Dallas DS1302"
839 depends on SH_SECUREEDGE5410
840 help
841 If you say yes here you get support for the Dallas DS1302 RTC chips.
842
843config RTC_DRV_DS1511
844 tristate "Dallas DS1511"
845 depends on HAS_IOMEM
846 help
847 If you say yes here you get support for the
848 Dallas DS1511 timekeeping/watchdog chip.
849
850 This driver can also be built as a module. If so, the module
851 will be called rtc-ds1511.
852
853config RTC_DRV_DS1553
854 tristate "Maxim/Dallas DS1553"
855 depends on HAS_IOMEM
856 help
857 If you say yes here you get support for the
858 Maxim/Dallas DS1553 timekeeping chip.
859
860 This driver can also be built as a module. If so, the module
861 will be called rtc-ds1553.
862
863config RTC_DRV_DS1685_FAMILY
864 tristate "Dallas/Maxim DS1685 Family"
865 help
866 If you say yes here you get support for the Dallas/Maxim DS1685
867 family of real time chips. This family includes the DS1685/DS1687,
868 DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and
869 DS17885/DS17887 chips.
870
871 This driver can also be built as a module. If so, the module
872 will be called rtc-ds1685.
873
874choice
875 prompt "Subtype"
876 depends on RTC_DRV_DS1685_FAMILY
877 default RTC_DRV_DS1685
878
879config RTC_DRV_DS1685
880 bool "DS1685/DS1687"
881 help
882 This enables support for the Dallas/Maxim DS1685/DS1687 real time
883 clock chip.
884
885 This chip is commonly found in SGI O2 (IP32) and SGI Octane (IP30)
886 systems, as well as EPPC-405-UC modules by electronic system design
887 GmbH.
888
889config RTC_DRV_DS1689
890 bool "DS1689/DS1693"
891 help
892 This enables support for the Dallas/Maxim DS1689/DS1693 real time
893 clock chip.
894
895 This is an older RTC chip, supplanted by the DS1685/DS1687 above,
896 which supports a few minor features such as Vcc, Vbat, and Power
897 Cycle counters, plus a customer-specific, 8-byte ROM/Serial number.
898
899 It also works for the even older DS1688/DS1691 RTC chips, which are
900 virtually the same and carry the same model number. Both chips
901 have 114 bytes of user NVRAM.
902
903config RTC_DRV_DS17285
904 bool "DS17285/DS17287"
905 help
906 This enables support for the Dallas/Maxim DS17285/DS17287 real time
907 clock chip.
908
909 This chip features 2kb of extended NV-SRAM. It may possibly be
910 found in some SGI O2 systems (rare).
911
912config RTC_DRV_DS17485
913 bool "DS17485/DS17487"
914 help
915 This enables support for the Dallas/Maxim DS17485/DS17487 real time
916 clock chip.
917
918 This chip features 4kb of extended NV-SRAM.
919
920config RTC_DRV_DS17885
921 bool "DS17885/DS17887"
922 help
923 This enables support for the Dallas/Maxim DS17885/DS17887 real time
924 clock chip.
925
926 This chip features 8kb of extended NV-SRAM.
927
928endchoice
929
930config RTC_DS1685_PROC_REGS
931 bool "Display register values in /proc"
932 depends on RTC_DRV_DS1685_FAMILY && PROC_FS
933 help
934 Enable this to display a readout of all of the RTC registers in
935 /proc/drivers/rtc. Keep in mind that this can potentially lead
936 to lost interrupts, as reading Control Register C will clear
937 all pending IRQ flags.
938
939 Unless you are debugging this driver, choose N.
940
941config RTC_DS1685_SYSFS_REGS
942 bool "SysFS access to RTC register bits"
943 depends on RTC_DRV_DS1685_FAMILY && SYSFS
944 help
945 Enable this to provide access to the RTC control register bits
946 in /sys. Some of the bits are read-write, others are read-only.
947
948 Keep in mind that reading Control C's bits automatically clears
949 all pending IRQ flags - this can cause lost interrupts.
950
951 If you know that you need access to these bits, choose Y, Else N.
952
953config RTC_DRV_DS1742
954 tristate "Maxim/Dallas DS1742/1743"
955 depends on HAS_IOMEM
956 help
957 If you say yes here you get support for the
958 Maxim/Dallas DS1742/1743 timekeeping chip.
959
960 This driver can also be built as a module. If so, the module
961 will be called rtc-ds1742.
962
963config RTC_DRV_DS2404
964 tristate "Maxim/Dallas DS2404"
965 help
966 If you say yes here you get support for the
967 Dallas DS2404 RTC chip.
968
969 This driver can also be built as a module. If so, the module
970 will be called rtc-ds2404.
971
972config RTC_DRV_DA9052
973 tristate "Dialog DA9052/DA9053 RTC"
974 depends on PMIC_DA9052
975 help
976 Say y here to support the RTC driver for Dialog Semiconductor
977 DA9052-BC and DA9053-AA/Bx PMICs.
978
979config RTC_DRV_DA9055
980 tristate "Dialog Semiconductor DA9055 RTC"
981 depends on MFD_DA9055
982 help
983 If you say yes here you will get support for the
984 RTC of the Dialog DA9055 PMIC.
985
986 This driver can also be built as a module. If so, the module
987 will be called rtc-da9055
988
989config RTC_DRV_DA9063
990 tristate "Dialog Semiconductor DA9063/DA9062 RTC"
991 depends on MFD_DA9063 || MFD_DA9062
992 help
993 If you say yes here you will get support for the RTC subsystem
994 for the Dialog Semiconductor PMIC chips DA9063 and DA9062.
995
996 This driver can also be built as a module. If so, the module
997 will be called "rtc-da9063".
998
999config RTC_DRV_EFI
1000 tristate "EFI RTC"
1001 depends on EFI && !X86
1002 help
1003 If you say yes here you will get support for the EFI
1004 Real Time Clock.
1005
1006 This driver can also be built as a module. If so, the module
1007 will be called rtc-efi.
1008
1009config RTC_DRV_STK17TA8
1010 tristate "Simtek STK17TA8"
1011 depends on HAS_IOMEM
1012 help
1013 If you say yes here you get support for the
1014 Simtek STK17TA8 timekeeping chip.
1015
1016 This driver can also be built as a module. If so, the module
1017 will be called rtc-stk17ta8.
1018
1019config RTC_DRV_M48T86
1020 tristate "ST M48T86/Dallas DS12887"
1021 help
1022 If you say Y here you will get support for the
1023 ST M48T86 and Dallas DS12887 RTC chips.
1024
1025 This driver can also be built as a module. If so, the module
1026 will be called rtc-m48t86.
1027
1028config RTC_DRV_M48T35
1029 tristate "ST M48T35"
1030 depends on HAS_IOMEM
1031 help
1032 If you say Y here you will get support for the
1033 ST M48T35 RTC chip.
1034
1035 This driver can also be built as a module, if so, the module
1036 will be called "rtc-m48t35".
1037
1038config RTC_DRV_M48T59
1039 tristate "ST M48T59/M48T08/M48T02"
1040 depends on HAS_IOMEM
1041 help
1042 If you say Y here you will get support for the
1043 ST M48T59 RTC chip and compatible ST M48T08 and M48T02.
1044
1045 These chips are usually found in Sun SPARC and UltraSPARC
1046 workstations.
1047
1048 This driver can also be built as a module, if so, the module
1049 will be called "rtc-m48t59".
1050
1051config RTC_DRV_MSM6242
1052 tristate "Oki MSM6242"
1053 depends on HAS_IOMEM
1054 help
1055 If you say yes here you get support for the Oki MSM6242
1056 timekeeping chip. It is used in some Amiga models (e.g. A2000).
1057
1058 This driver can also be built as a module. If so, the module
1059 will be called rtc-msm6242.
1060
1061config RTC_DRV_BQ4802
1062 tristate "TI BQ4802"
1063 depends on HAS_IOMEM
1064 help
1065 If you say Y here you will get support for the TI
1066 BQ4802 RTC chip.
1067
1068 This driver can also be built as a module. If so, the module
1069 will be called rtc-bq4802.
1070
1071config RTC_DRV_RP5C01
1072 tristate "Ricoh RP5C01"
1073 depends on HAS_IOMEM
1074 help
1075 If you say yes here you get support for the Ricoh RP5C01
1076 timekeeping chip. It is used in some Amiga models (e.g. A3000
1077 and A4000).
1078
1079 This driver can also be built as a module. If so, the module
1080 will be called rtc-rp5c01.
1081
1082config RTC_DRV_V3020
1083 tristate "EM Microelectronic V3020"
1084 help
1085 If you say yes here you will get support for the
1086 EM Microelectronic v3020 RTC chip.
1087
1088 This driver can also be built as a module. If so, the module
1089 will be called rtc-v3020.
1090
1091config RTC_DRV_WM831X
1092 tristate "Wolfson Microelectronics WM831x RTC"
1093 depends on MFD_WM831X
1094 help
1095 If you say yes here you will get support for the RTC subsystem
1096 of the Wolfson Microelectronics WM831X series PMICs.
1097
1098 This driver can also be built as a module. If so, the module
1099 will be called "rtc-wm831x".
1100
1101config RTC_DRV_WM8350
1102 tristate "Wolfson Microelectronics WM8350 RTC"
1103 depends on MFD_WM8350
1104 help
1105 If you say yes here you will get support for the RTC subsystem
1106 of the Wolfson Microelectronics WM8350.
1107
1108 This driver can also be built as a module. If so, the module
1109 will be called "rtc-wm8350".
1110
1111config RTC_DRV_SPEAR
1112 tristate "SPEAR ST RTC"
1113 depends on PLAT_SPEAR || COMPILE_TEST
1114 default y
1115 help
1116 If you say Y here you will get support for the RTC found on
1117 spear
1118
1119config RTC_DRV_PCF50633
1120 depends on MFD_PCF50633
1121 tristate "NXP PCF50633 RTC"
1122 help
1123 If you say yes here you get support for the RTC subsystem of the
1124 NXP PCF50633 used in embedded systems.
1125
1126config RTC_DRV_AB3100
1127 tristate "ST-Ericsson AB3100 RTC"
1128 depends on AB3100_CORE
1129 default y if AB3100_CORE
1130 help
1131 Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
1132 support. This chip contains a battery- and capacitor-backed RTC.
1133
1134config RTC_DRV_AB8500
1135 tristate "ST-Ericsson AB8500 RTC"
1136 depends on AB8500_CORE
1137 select RTC_INTF_DEV
1138 select RTC_INTF_DEV_UIE_EMUL
1139 help
1140 Select this to enable the ST-Ericsson AB8500 power management IC RTC
1141 support. This chip contains a battery- and capacitor-backed RTC.
1142
1143config RTC_DRV_NUC900
1144 tristate "NUC910/NUC920 RTC driver"
1145 depends on ARCH_W90X900 || COMPILE_TEST
1146 help
1147 If you say yes here you get support for the RTC subsystem of the
1148 NUC910/NUC920 used in embedded systems.
1149
1150config RTC_DRV_OPAL
1151 tristate "IBM OPAL RTC driver"
1152 depends on PPC_POWERNV
1153 default y
1154 help
1155 If you say yes here you get support for the PowerNV platform RTC
1156 driver based on OPAL interfaces.
1157
1158 This driver can also be built as a module. If so, the module
1159 will be called rtc-opal.
1160
1161config RTC_DRV_ZYNQMP
1162 tristate "Xilinx Zynq Ultrascale+ MPSoC RTC"
1163 depends on OF
1164 help
1165 If you say yes here you get support for the RTC controller found on
1166 Xilinx Zynq Ultrascale+ MPSoC.
1167
1168comment "on-CPU RTC drivers"
1169
1170config RTC_DRV_ASM9260
1171 tristate "Alphascale asm9260 RTC"
1172 depends on MACH_ASM9260
1173 help
1174 If you say yes here you get support for the RTC on the
1175 Alphascale asm9260 SoC.
1176
1177 This driver can also be built as a module. If so, the module
1178 will be called rtc-asm9260.
1179
1180config RTC_DRV_DAVINCI
1181 tristate "TI DaVinci RTC"
1182 depends on ARCH_DAVINCI_DM365 || COMPILE_TEST
1183 help
1184 If you say yes here you get support for the RTC on the
1185 DaVinci platforms (DM365).
1186
1187 This driver can also be built as a module. If so, the module
1188 will be called rtc-davinci.
1189
1190config RTC_DRV_DIGICOLOR
1191 tristate "Conexant Digicolor RTC"
1192 depends on ARCH_DIGICOLOR || COMPILE_TEST
1193 help
1194 If you say yes here you get support for the RTC on Conexant
1195 Digicolor platforms. This currently includes the CX92755 SoC.
1196
1197 This driver can also be built as a module. If so, the module
1198 will be called rtc-digicolor.
1199
1200config RTC_DRV_IMXDI
1201 tristate "Freescale IMX DryIce Real Time Clock"
1202 depends on ARCH_MXC
1203 help
1204 Support for Freescale IMX DryIce RTC
1205
1206 This driver can also be built as a module, if so, the module
1207 will be called "rtc-imxdi".
1208
1209config RTC_DRV_OMAP
1210 tristate "TI OMAP Real Time Clock"
1211 depends on ARCH_OMAP || ARCH_DAVINCI || COMPILE_TEST
1212 help
1213 Say "yes" here to support the on chip real time clock
1214 present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx.
1215
1216 This driver can also be built as a module, if so, module
1217 will be called rtc-omap.
1218
1219config HAVE_S3C_RTC
1220 bool
1221 help
1222 This will include RTC support for Samsung SoCs. If
1223 you want to include RTC support for any machine, kindly
1224 select this in the respective mach-XXXX/Kconfig file.
1225
1226config RTC_DRV_S3C
1227 tristate "Samsung S3C series SoC RTC"
1228 depends on ARCH_S3C64XX || HAVE_S3C_RTC || COMPILE_TEST
1229 help
1230 RTC (Realtime Clock) driver for the clock inbuilt into the
1231 Samsung S3C24XX series of SoCs. This can provide periodic
1232 interrupt rates from 1Hz to 64Hz for user programs, and
1233 wakeup from Alarm.
1234
1235 The driver currently supports the common features on all the
1236 S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
1237 and S3C2442.
1238
1239 This driver can also be build as a module. If so, the module
1240 will be called rtc-s3c.
1241
1242config RTC_DRV_EP93XX
1243 tristate "Cirrus Logic EP93XX"
1244 depends on ARCH_EP93XX || COMPILE_TEST
1245 help
1246 If you say yes here you get support for the
1247 RTC embedded in the Cirrus Logic EP93XX processors.
1248
1249 This driver can also be built as a module. If so, the module
1250 will be called rtc-ep93xx.
1251
1252config RTC_DRV_SA1100
1253 tristate "SA11x0/PXA2xx/PXA910"
1254 depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
1255 help
1256 If you say Y here you will get access to the real time clock
1257 built into your SA11x0 or PXA2xx CPU.
1258
1259 To compile this driver as a module, choose M here: the
1260 module will be called rtc-sa1100.
1261
1262config RTC_DRV_SH
1263 tristate "SuperH On-Chip RTC"
1264 depends on SUPERH && HAVE_CLK
1265 help
1266 Say Y here to enable support for the on-chip RTC found in
1267 most SuperH processors.
1268
1269 To compile this driver as a module, choose M here: the
1270 module will be called rtc-sh.
1271
1272config RTC_DRV_VR41XX
1273 tristate "NEC VR41XX"
1274 depends on CPU_VR41XX || COMPILE_TEST
1275 help
1276 If you say Y here you will get access to the real time clock
1277 built into your NEC VR41XX CPU.
1278
1279 To compile this driver as a module, choose M here: the
1280 module will be called rtc-vr41xx.
1281
1282config RTC_DRV_PL030
1283 tristate "ARM AMBA PL030 RTC"
1284 depends on ARM_AMBA
1285 help
1286 If you say Y here you will get access to ARM AMBA
1287 PrimeCell PL030 RTC found on certain ARM SOCs.
1288
1289 To compile this driver as a module, choose M here: the
1290 module will be called rtc-pl030.
1291
1292config RTC_DRV_PL031
1293 tristate "ARM AMBA PL031 RTC"
1294 depends on ARM_AMBA
1295 help
1296 If you say Y here you will get access to ARM AMBA
1297 PrimeCell PL031 RTC found on certain ARM SOCs.
1298
1299 To compile this driver as a module, choose M here: the
1300 module will be called rtc-pl031.
1301
1302config RTC_DRV_AT32AP700X
1303 tristate "AT32AP700X series RTC"
1304 depends on PLATFORM_AT32AP || COMPILE_TEST
1305 help
1306 Driver for the internal RTC (Realtime Clock) on Atmel AVR32
1307 AT32AP700x family processors.
1308
1309config RTC_DRV_AT91RM9200
1310 tristate "AT91RM9200 or some AT91SAM9 RTC"
1311 depends on ARCH_AT91 || COMPILE_TEST
1312 help
1313 Driver for the internal RTC (Realtime Clock) module found on
1314 Atmel AT91RM9200's and some AT91SAM9 chips. On AT91SAM9 chips
1315 this is powered by the backup power supply.
1316
1317config RTC_DRV_AT91SAM9
1318 tristate "AT91SAM9 RTT as RTC"
1319 depends on ARCH_AT91 || COMPILE_TEST
1320 select MFD_SYSCON
1321 help
1322 Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
1323 can be used as an RTC thanks to the backup power supply (e.g. a
1324 small coin cell battery) which keeps this block and the GPBR
1325 (General Purpose Backup Registers) block powered when the device
1326 is shutdown.
1327 Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd
1328 probably want to use the real RTC block instead of the "RTT as an
1329 RTC" driver.
1330
1331config RTC_DRV_AU1XXX
1332 tristate "Au1xxx Counter0 RTC support"
1333 depends on MIPS_ALCHEMY
1334 help
1335 This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
1336 counter) to be used as a RTC.
1337
1338 This driver can also be built as a module. If so, the module
1339 will be called rtc-au1xxx.
1340
1341config RTC_DRV_BFIN
1342 tristate "Blackfin On-Chip RTC"
1343 depends on BLACKFIN && !BF561
1344 help
1345 If you say yes here you will get support for the
1346 Blackfin On-Chip Real Time Clock.
1347
1348 This driver can also be built as a module. If so, the module
1349 will be called rtc-bfin.
1350
1351config RTC_DRV_RS5C313
1352 tristate "Ricoh RS5C313"
1353 depends on SH_LANDISK
1354 help
1355 If you say yes here you get support for the Ricoh RS5C313 RTC chips.
1356
1357config RTC_DRV_GENERIC
1358 tristate "Generic RTC support"
1359 # Please consider writing a new RTC driver instead of using the generic
1360 # RTC abstraction
1361 depends on PARISC || M68K || PPC || SUPERH32 || COMPILE_TEST
1362 help
1363 Say Y or M here to enable RTC support on systems using the generic
1364 RTC abstraction. If you do not know what you are doing, you should
1365 just say Y.
1366
1367config RTC_DRV_PXA
1368 tristate "PXA27x/PXA3xx"
1369 depends on ARCH_PXA
1370 select RTC_DRV_SA1100
1371 help
1372 If you say Y here you will get access to the real time clock
1373 built into your PXA27x or PXA3xx CPU. This RTC is actually 2 RTCs
1374 consisting of an SA1100 compatible RTC and the extended PXA RTC.
1375
1376 This RTC driver uses PXA RTC registers available since pxa27x
1377 series (RDxR, RYxR) instead of legacy RCNR, RTAR.
1378
1379config RTC_DRV_VT8500
1380 tristate "VIA/WonderMedia 85xx SoC RTC"
1381 depends on ARCH_VT8500 || COMPILE_TEST
1382 help
1383 If you say Y here you will get access to the real time clock
1384 built into your VIA VT8500 SoC or its relatives.
1385
1386
1387config RTC_DRV_SUN4V
1388 bool "SUN4V Hypervisor RTC"
1389 depends on SPARC64
1390 help
1391 If you say Y here you will get support for the Hypervisor
1392 based RTC on SUN4V systems.
1393
1394config RTC_DRV_SUN6I
1395 tristate "Allwinner A31 RTC"
1396 default MACH_SUN6I || MACH_SUN8I || COMPILE_TEST
1397 depends on ARCH_SUNXI
1398 help
1399 If you say Y here you will get support for the RTC found in
1400 some Allwinner SoCs like the A31 or the A64.
1401
1402config RTC_DRV_SUNXI
1403 tristate "Allwinner sun4i/sun7i RTC"
1404 depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
1405 help
1406 If you say Y here you will get support for the RTC found on
1407 Allwinner A10/A20.
1408
1409config RTC_DRV_STARFIRE
1410 bool "Starfire RTC"
1411 depends on SPARC64
1412 help
1413 If you say Y here you will get support for the RTC found on
1414 Starfire systems.
1415
1416config RTC_DRV_TX4939
1417 tristate "TX4939 SoC"
1418 depends on SOC_TX4939
1419 help
1420 Driver for the internal RTC (Realtime Clock) module found on
1421 Toshiba TX4939 SoC.
1422
1423config RTC_DRV_MV
1424 tristate "Marvell SoC RTC"
1425 depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST
1426 help
1427 If you say yes here you will get support for the in-chip RTC
1428 that can be found in some of Marvell's SoC devices, such as
1429 the Kirkwood 88F6281 and 88F6192.
1430
1431 This driver can also be built as a module. If so, the module
1432 will be called rtc-mv.
1433
1434config RTC_DRV_ARMADA38X
1435 tristate "Armada 38x Marvell SoC RTC"
1436 depends on ARCH_MVEBU || COMPILE_TEST
1437 help
1438 If you say yes here you will get support for the in-chip RTC
1439 that can be found in the Armada 38x Marvell's SoC device
1440
1441 This driver can also be built as a module. If so, the module
1442 will be called armada38x-rtc.
1443
1444config RTC_DRV_GEMINI
1445 tristate "Gemini SoC RTC"
1446 depends on ARCH_GEMINI || COMPILE_TEST
1447 depends on HAS_IOMEM
1448 help
1449 If you say Y here you will get support for the
1450 RTC found on Gemini SoC's.
1451
1452 This driver can also be built as a module. If so, the module
1453 will be called rtc-gemini.
1454
1455config RTC_DRV_PS3
1456 tristate "PS3 RTC"
1457 depends on PPC_PS3
1458 help
1459 If you say yes here you will get support for the RTC on PS3.
1460
1461 This driver can also be built as a module. If so, the module
1462 will be called rtc-ps3.
1463
1464config RTC_DRV_COH901331
1465 tristate "ST-Ericsson COH 901 331 RTC"
1466 depends on ARCH_U300 || COMPILE_TEST
1467 help
1468 If you say Y here you will get access to ST-Ericsson
1469 COH 901 331 RTC clock found in some ST-Ericsson Mobile
1470 Platforms.
1471
1472 This driver can also be built as a module. If so, the module
1473 will be called "rtc-coh901331".
1474
1475
1476config RTC_DRV_STMP
1477 tristate "Freescale STMP3xxx/i.MX23/i.MX28 RTC"
1478 depends on ARCH_MXS || COMPILE_TEST
1479 select STMP_DEVICE
1480 help
1481 If you say yes here you will get support for the onboard
1482 STMP3xxx/i.MX23/i.MX28 RTC.
1483
1484 This driver can also be built as a module. If so, the module
1485 will be called rtc-stmp3xxx.
1486
1487config RTC_DRV_PCAP
1488 tristate "PCAP RTC"
1489 depends on EZX_PCAP
1490 help
1491 If you say Y here you will get support for the RTC found on
1492 the PCAP2 ASIC used on some Motorola phones.
1493
1494config RTC_DRV_MC13XXX
1495 depends on MFD_MC13XXX
1496 tristate "Freescale MC13xxx RTC"
1497 help
1498 This enables support for the RTCs found on Freescale's PMICs
1499 MC13783 and MC13892.
1500
1501config RTC_DRV_MPC5121
1502 tristate "Freescale MPC5121 built-in RTC"
1503 depends on PPC_MPC512x || PPC_MPC52xx
1504 help
1505 If you say yes here you will get support for the
1506 built-in RTC on MPC5121 or on MPC5200.
1507
1508 This driver can also be built as a module. If so, the module
1509 will be called rtc-mpc5121.
1510
1511config RTC_DRV_JZ4740
1512 tristate "Ingenic JZ4740 SoC"
1513 depends on MACH_JZ4740 || COMPILE_TEST
1514 help
1515 If you say yes here you get support for the Ingenic JZ4740 SoC RTC
1516 controller.
1517
1518 This driver can also be buillt as a module. If so, the module
1519 will be called rtc-jz4740.
1520
1521config RTC_DRV_LPC24XX
1522 tristate "NXP RTC for LPC178x/18xx/408x/43xx"
1523 depends on ARCH_LPC18XX || COMPILE_TEST
1524 depends on OF && HAS_IOMEM
1525 help
1526 This enables support for the NXP RTC found which can be found on
1527 NXP LPC178x/18xx/408x/43xx devices.
1528
1529 If you have one of the devices above enable this driver to use
1530 the hardware RTC. This driver can also be buillt as a module. If
1531 so, the module will be called rtc-lpc24xx.
1532
1533config RTC_DRV_LPC32XX
1534 depends on ARCH_LPC32XX || COMPILE_TEST
1535 tristate "NXP LPC32XX RTC"
1536 help
1537 This enables support for the NXP RTC in the LPC32XX
1538
1539 This driver can also be buillt as a module. If so, the module
1540 will be called rtc-lpc32xx.
1541
1542config RTC_DRV_PM8XXX
1543 tristate "Qualcomm PMIC8XXX RTC"
1544 depends on MFD_PM8XXX || MFD_SPMI_PMIC || COMPILE_TEST
1545 help
1546 If you say yes here you get support for the
1547 Qualcomm PMIC8XXX RTC.
1548
1549 To compile this driver as a module, choose M here: the
1550 module will be called rtc-pm8xxx.
1551
1552config RTC_DRV_TEGRA
1553 tristate "NVIDIA Tegra Internal RTC driver"
1554 depends on ARCH_TEGRA || COMPILE_TEST
1555 help
1556 If you say yes here you get support for the
1557 Tegra 200 series internal RTC module.
1558
1559 This drive can also be built as a module. If so, the module
1560 will be called rtc-tegra.
1561
1562config RTC_DRV_TILE
1563 tristate "Tilera hypervisor RTC support"
1564 depends on TILE
1565 help
1566 Enable support for the Linux driver side of the Tilera
1567 hypervisor's real-time clock interface.
1568
1569config RTC_DRV_PUV3
1570 tristate "PKUnity v3 RTC support"
1571 depends on ARCH_PUV3
1572 help
1573 This enables support for the RTC in the PKUnity-v3 SoCs.
1574
1575 This drive can also be built as a module. If so, the module
1576 will be called rtc-puv3.
1577
1578config RTC_DRV_LOONGSON1
1579 tristate "loongson1 RTC support"
1580 depends on MACH_LOONGSON32
1581 help
1582 This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year
1583 counter) to be used as a RTC.
1584
1585 This driver can also be built as a module. If so, the module
1586 will be called rtc-ls1x.
1587
1588config RTC_DRV_MXC
1589 tristate "Freescale MXC Real Time Clock"
1590 depends on ARCH_MXC
1591 help
1592 If you say yes here you get support for the Freescale MXC
1593 RTC module.
1594
1595 This driver can also be built as a module, if so, the module
1596 will be called "rtc-mxc".
1597
1598config RTC_DRV_SNVS
1599 tristate "Freescale SNVS RTC support"
1600 select REGMAP_MMIO
1601 depends on HAS_IOMEM
1602 depends on OF
1603 help
1604 If you say yes here you get support for the Freescale SNVS
1605 Low Power (LP) RTC module.
1606
1607 This driver can also be built as a module, if so, the module
1608 will be called "rtc-snvs".
1609
1610config RTC_DRV_SIRFSOC
1611 tristate "SiRFSOC RTC"
1612 depends on ARCH_SIRF
1613 help
1614 Say "yes" here to support the real time clock on SiRF SOC chips.
1615 This driver can also be built as a module called rtc-sirfsoc.
1616
1617config RTC_DRV_ST_LPC
1618 tristate "STMicroelectronics LPC RTC"
1619 depends on ARCH_STI
1620 depends on OF
1621 help
1622 Say Y here to include STMicroelectronics Low Power Controller
1623 (LPC) based RTC support.
1624
1625 To compile this driver as a module, choose M here: the
1626 module will be called rtc-st-lpc.
1627
1628config RTC_DRV_MOXART
1629 tristate "MOXA ART RTC"
1630 depends on ARCH_MOXART || COMPILE_TEST
1631 help
1632 If you say yes here you get support for the MOXA ART
1633 RTC module.
1634
1635 This driver can also be built as a module. If so, the module
1636 will be called rtc-moxart
1637
1638config RTC_DRV_MT6397
1639 tristate "Mediatek Real Time Clock driver"
1640 depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
1641 help
1642 This selects the Mediatek(R) RTC driver. RTC is part of Mediatek
1643 MT6397 PMIC. You should enable MT6397 PMIC MFD before select
1644 Mediatek(R) RTC driver.
1645
1646 If you want to use Mediatek(R) RTC interface, select Y or M here.
1647
1648config RTC_DRV_XGENE
1649 tristate "APM X-Gene RTC"
1650 depends on HAS_IOMEM
1651 depends on ARCH_XGENE || COMPILE_TEST
1652 help
1653 If you say yes here you get support for the APM X-Gene SoC real time
1654 clock.
1655
1656 This driver can also be built as a module, if so, the module
1657 will be called "rtc-xgene".
1658
1659config RTC_DRV_PIC32
1660 tristate "Microchip PIC32 RTC"
1661 depends on MACH_PIC32
1662 default y
1663 help
1664 If you say yes here you get support for the PIC32 RTC module.
1665
1666 This driver can also be built as a module. If so, the module
1667 will be called rtc-pic32
1668
1669comment "HID Sensor RTC drivers"
1670
1671config RTC_DRV_HID_SENSOR_TIME
1672 tristate "HID Sensor Time"
1673 depends on USB_HID
1674 select IIO
1675 select HID_SENSOR_HUB
1676 select HID_SENSOR_IIO_COMMON
1677 help
1678 Say yes here to build support for the HID Sensors of type Time.
1679 This drivers makes such sensors available as RTCs.
1680
1681 If this driver is compiled as a module, it will be named
1682 rtc-hid-sensor-time.
1683
1684
1685endif # RTC_CLASS
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# RTC class/drivers configuration
4#
5
6config RTC_LIB
7 bool
8
9config RTC_MC146818_LIB
10 bool
11 select RTC_LIB
12
13menuconfig RTC_CLASS
14 bool "Real Time Clock"
15 default n
16 depends on !S390
17 select RTC_LIB
18 help
19 Generic RTC class support. If you say yes here, you will
20 be allowed to plug one or more RTCs to your system. You will
21 probably want to enable one or more of the interfaces below.
22
23if RTC_CLASS
24
25config RTC_HCTOSYS
26 bool "Set system time from RTC on startup and resume"
27 default y
28 help
29 If you say yes here, the system time (wall clock) will be set using
30 the value read from a specified RTC device. This is useful to avoid
31 unnecessary fsck runs at boot time, and to network better.
32
33config RTC_HCTOSYS_DEVICE
34 string "RTC used to set the system time"
35 depends on RTC_HCTOSYS
36 default "rtc0"
37 help
38 The RTC device that will be used to (re)initialize the system
39 clock, usually rtc0. Initialization is done when the system
40 starts up, and when it resumes from a low power state. This
41 device should record time in UTC, since the kernel won't do
42 timezone correction.
43
44 This clock should be battery-backed, so that it reads the correct
45 time when the system boots from a power-off state. Otherwise, your
46 system will need an external clock source (like an NTP server).
47
48 If the clock you specify here is not battery backed, it may still
49 be useful to reinitialize system time when resuming from system
50 sleep states. Do not specify an RTC here unless it stays powered
51 during all this system's supported sleep states.
52
53config RTC_SYSTOHC
54 bool "Set the RTC time based on NTP synchronization"
55 default y
56 help
57 If you say yes here, the system time (wall clock) will be stored
58 in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11
59 minutes if userspace reports synchronized NTP status.
60
61config RTC_SYSTOHC_DEVICE
62 string "RTC used to synchronize NTP adjustment"
63 depends on RTC_SYSTOHC
64 default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
65 default "rtc0"
66 help
67 The RTC device used for NTP synchronization. The main difference
68 between RTC_HCTOSYS_DEVICE and RTC_SYSTOHC_DEVICE is that this
69 one can sleep when setting time, because it runs in the workqueue
70 context.
71
72config RTC_DEBUG
73 bool "RTC debug support"
74 help
75 Say yes here to enable debugging support in the RTC framework
76 and individual RTC drivers.
77
78config RTC_NVMEM
79 bool "RTC non volatile storage support"
80 select NVMEM
81 default RTC_CLASS
82 help
83 Say yes here to add support for the non volatile (often battery
84 backed) storage present on RTCs.
85
86comment "RTC interfaces"
87
88config RTC_INTF_SYSFS
89 bool "/sys/class/rtc/rtcN (sysfs)"
90 depends on SYSFS
91 default RTC_CLASS
92 help
93 Say yes here if you want to use your RTCs using sysfs interfaces,
94 /sys/class/rtc/rtc0 through /sys/.../rtcN.
95
96 If unsure, say Y.
97
98config RTC_INTF_PROC
99 bool "/proc/driver/rtc (procfs for rtcN)"
100 depends on PROC_FS
101 default RTC_CLASS
102 help
103 Say yes here if you want to use your system clock RTC through
104 the proc interface, /proc/driver/rtc.
105 Other RTCs will not be available through that API.
106 If there is no RTC for the system clock, then the first RTC(rtc0)
107 is used by default.
108
109 If unsure, say Y.
110
111config RTC_INTF_DEV
112 bool "/dev/rtcN (character devices)"
113 default RTC_CLASS
114 help
115 Say yes here if you want to use your RTCs using the /dev
116 interfaces, which "udev" sets up as /dev/rtc0 through
117 /dev/rtcN.
118
119 You may want to set up a symbolic link so one of these
120 can be accessed as /dev/rtc, which is a name
121 expected by "hwclock" and some other programs. Recent
122 versions of "udev" are known to set up the symlink for you.
123
124 If unsure, say Y.
125
126config RTC_INTF_DEV_UIE_EMUL
127 bool "RTC UIE emulation on dev interface"
128 depends on RTC_INTF_DEV
129 help
130 Provides an emulation for RTC_UIE if the underlying rtc chip
131 driver does not expose RTC_UIE ioctls. Those requests generate
132 once-per-second update interrupts, used for synchronization.
133
134 The emulation code will read the time from the hardware
135 clock several times per second, please enable this option
136 only if you know that you really need it.
137
138config RTC_DRV_TEST
139 tristate "Test driver/device"
140 help
141 If you say yes here you get support for the
142 RTC test driver. It's a software RTC which can be
143 used to test the RTC subsystem APIs. It gets
144 the time from the system clock.
145 You want this driver only if you are doing development
146 on the RTC subsystem. Please read the source code
147 for further details.
148
149 This driver can also be built as a module. If so, the module
150 will be called rtc-test.
151
152comment "I2C RTC drivers"
153
154if I2C
155
156config RTC_DRV_88PM860X
157 tristate "Marvell 88PM860x"
158 depends on MFD_88PM860X
159 help
160 If you say yes here you get support for RTC function in Marvell
161 88PM860x chips.
162
163 This driver can also be built as a module. If so, the module
164 will be called rtc-88pm860x.
165
166config RTC_DRV_88PM80X
167 tristate "Marvell 88PM80x"
168 depends on MFD_88PM800
169 help
170 If you say yes here you get support for RTC function in Marvell
171 88PM80x chips.
172
173 This driver can also be built as a module. If so, the module
174 will be called rtc-88pm80x.
175
176config RTC_DRV_ABB5ZES3
177 select REGMAP_I2C
178 tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
179 help
180 If you say yes here you get support for the Abracon
181 AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
182
183 This driver can also be built as a module. If so, the module
184 will be called rtc-ab-b5ze-s3.
185
186config RTC_DRV_ABEOZ9
187 select REGMAP_I2C
188 tristate "Abracon AB-RTCMC-32.768kHz-EOZ9"
189 help
190 If you say yes here you get support for the Abracon
191 AB-RTCMC-32.768kHz-EOA9 I2C RTC chip.
192
193 This driver can also be built as a module. If so, the module
194 will be called rtc-ab-e0z9.
195
196config RTC_DRV_ABX80X
197 tristate "Abracon ABx80x"
198 select WATCHDOG_CORE if WATCHDOG
199 help
200 If you say yes here you get support for Abracon AB080X and AB180X
201 families of ultra-low-power battery- and capacitor-backed real-time
202 clock chips.
203
204 This driver can also be built as a module. If so, the module
205 will be called rtc-abx80x.
206
207config RTC_DRV_AC100
208 tristate "X-Powers AC100"
209 depends on MFD_AC100
210 help
211 If you say yes here you get support for the real-time clock found
212 in X-Powers AC100 family peripheral ICs.
213
214 This driver can also be built as a module. If so, the module
215 will be called rtc-ac100.
216
217config RTC_DRV_BRCMSTB
218 tristate "Broadcom STB wake-timer"
219 depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
220 default ARCH_BRCMSTB || BMIPS_GENERIC
221 help
222 If you say yes here you get support for the wake-timer found on
223 Broadcom STB SoCs (BCM7xxx).
224
225 This driver can also be built as a module. If so, the module will
226 be called rtc-brcmstb-waketimer.
227
228config RTC_DRV_AS3722
229 tristate "ams AS3722 RTC driver"
230 depends on MFD_AS3722
231 help
232 If you say yes here you get support for the RTC of ams AS3722 PMIC
233 chips.
234
235 This driver can also be built as a module. If so, the module
236 will be called rtc-as3722.
237
238config RTC_DRV_DS1307
239 tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
240 select REGMAP_I2C
241 select WATCHDOG_CORE if WATCHDOG
242 help
243 If you say yes here you get support for various compatible RTC
244 chips (often with battery backup) connected with I2C. This driver
245 should handle DS1307, DS1337, DS1338, DS1339, DS1340, DS1341,
246 ST M41T00, EPSON RX-8025, Intersil ISL12057 and probably other chips.
247 In some cases the RTC must already have been initialized (by
248 manufacturing or a bootloader).
249
250 The first seven registers on these chips hold an RTC, and other
251 registers may add features such as NVRAM, a trickle charger for
252 the RTC/NVRAM backup power, and alarms. NVRAM is visible in
253 sysfs, but other chip features may not be available.
254
255 This driver can also be built as a module. If so, the module
256 will be called rtc-ds1307.
257
258config RTC_DRV_DS1307_CENTURY
259 bool "Century bit support for rtc-ds1307"
260 depends on RTC_DRV_DS1307
261 default n
262 help
263 The DS1307 driver suffered from a bug where it was enabling the
264 century bit inconditionnally but never used it when reading the time.
265 It made the driver unable to support dates beyond 2099.
266 Setting this option will add proper support for the century bit but if
267 the time was previously set using a kernel predating this option,
268 reading the date will return a date in the next century.
269 To solve that, you could boot a kernel without this option set, set
270 the RTC date and then boot a kernel with this option set.
271
272config RTC_DRV_DS1374
273 tristate "Dallas/Maxim DS1374"
274 help
275 If you say yes here you get support for Dallas Semiconductor
276 DS1374 real-time clock chips. If an interrupt is associated
277 with the device, the alarm functionality is supported.
278
279 This driver can also be built as a module. If so, the module
280 will be called rtc-ds1374.
281
282config RTC_DRV_DS1374_WDT
283 bool "Dallas/Maxim DS1374 watchdog timer"
284 depends on RTC_DRV_DS1374 && WATCHDOG
285 select WATCHDOG_CORE
286 help
287 If you say Y here you will get support for the
288 watchdog timer in the Dallas Semiconductor DS1374
289 real-time clock chips.
290
291config RTC_DRV_DS1672
292 tristate "Dallas/Maxim DS1672"
293 help
294 If you say yes here you get support for the
295 Dallas/Maxim DS1672 timekeeping chip.
296
297 This driver can also be built as a module. If so, the module
298 will be called rtc-ds1672.
299
300config RTC_DRV_HYM8563
301 tristate "Haoyu Microelectronics HYM8563"
302 depends on OF
303 help
304 Say Y to enable support for the HYM8563 I2C RTC chip. Apart
305 from the usual rtc functions it provides a clock output of
306 up to 32kHz.
307
308 This driver can also be built as a module. If so, the module
309 will be called rtc-hym8563.
310
311config RTC_DRV_LP8788
312 tristate "TI LP8788 RTC driver"
313 depends on MFD_LP8788
314 help
315 Say Y to enable support for the LP8788 RTC/ALARM driver.
316
317config RTC_DRV_MAX6900
318 tristate "Maxim MAX6900"
319 help
320 If you say yes here you will get support for the
321 Maxim MAX6900 I2C RTC chip.
322
323 This driver can also be built as a module. If so, the module
324 will be called rtc-max6900.
325
326config RTC_DRV_MAX8907
327 tristate "Maxim MAX8907"
328 depends on MFD_MAX8907 || COMPILE_TEST
329 select REGMAP_IRQ
330 help
331 If you say yes here you will get support for the
332 RTC of Maxim MAX8907 PMIC.
333
334 This driver can also be built as a module. If so, the module
335 will be called rtc-max8907.
336
337config RTC_DRV_MAX8925
338 tristate "Maxim MAX8925"
339 depends on MFD_MAX8925
340 help
341 If you say yes here you will get support for the
342 RTC of Maxim MAX8925 PMIC.
343
344 This driver can also be built as a module. If so, the module
345 will be called rtc-max8925.
346
347config RTC_DRV_MAX8998
348 tristate "Maxim MAX8998"
349 depends on MFD_MAX8998
350 help
351 If you say yes here you will get support for the
352 RTC of Maxim MAX8998 PMIC.
353
354 This driver can also be built as a module. If so, the module
355 will be called rtc-max8998.
356
357config RTC_DRV_MAX8997
358 tristate "Maxim MAX8997"
359 depends on MFD_MAX8997
360 help
361 If you say yes here you will get support for the
362 RTC of Maxim MAX8997 PMIC.
363
364 This driver can also be built as a module. If so, the module
365 will be called rtc-max8997.
366
367config RTC_DRV_MAX77686
368 tristate "Maxim MAX77686"
369 depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
370 help
371 If you say yes here you will get support for the
372 RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
373
374 This driver can also be built as a module. If so, the module
375 will be called rtc-max77686.
376
377config RTC_DRV_RK808
378 tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC"
379 depends on MFD_RK808
380 help
381 If you say yes here you will get support for the
382 RTC of RK805, RK809 and RK817, RK808 and RK818 PMIC.
383
384 This driver can also be built as a module. If so, the module
385 will be called rk808-rtc.
386
387config RTC_DRV_RS5C372
388 tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
389 help
390 If you say yes here you get support for the
391 Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
392
393 This driver can also be built as a module. If so, the module
394 will be called rtc-rs5c372.
395
396config RTC_DRV_ISL1208
397 tristate "Intersil ISL1208"
398 help
399 If you say yes here you get support for the
400 Intersil ISL1208 RTC chip.
401
402 This driver can also be built as a module. If so, the module
403 will be called rtc-isl1208.
404
405config RTC_DRV_ISL12022
406 tristate "Intersil ISL12022"
407 help
408 If you say yes here you get support for the
409 Intersil ISL12022 RTC chip.
410
411 This driver can also be built as a module. If so, the module
412 will be called rtc-isl12022.
413
414config RTC_DRV_ISL12026
415 tristate "Intersil ISL12026"
416 depends on OF || COMPILE_TEST
417 help
418 If you say yes here you get support for the
419 Intersil ISL12026 RTC chip.
420
421 This driver can also be built as a module. If so, the module
422 will be called rtc-isl12026.
423
424config RTC_DRV_X1205
425 tristate "Xicor/Intersil X1205"
426 help
427 If you say yes here you get support for the
428 Xicor/Intersil X1205 RTC chip.
429
430 This driver can also be built as a module. If so, the module
431 will be called rtc-x1205.
432
433config RTC_DRV_PCF8523
434 tristate "NXP PCF8523"
435 help
436 If you say yes here you get support for the NXP PCF8523 RTC
437 chips.
438
439 This driver can also be built as a module. If so, the module
440 will be called rtc-pcf8523.
441
442config RTC_DRV_PCF85063
443 tristate "NXP PCF85063"
444 select REGMAP_I2C
445 help
446 If you say yes here you get support for the PCF85063 RTC chip
447
448 This driver can also be built as a module. If so, the module
449 will be called rtc-pcf85063.
450
451config RTC_DRV_PCF85363
452 tristate "NXP PCF85363"
453 select REGMAP_I2C
454 help
455 If you say yes here you get support for the PCF85363 RTC chip.
456
457 This driver can also be built as a module. If so, the module
458 will be called rtc-pcf85363.
459
460 The nvmem interface will be named pcf85363-#, where # is the
461 zero-based instance number.
462
463config RTC_DRV_PCF8563
464 tristate "Philips PCF8563/Epson RTC8564"
465 help
466 If you say yes here you get support for the
467 Philips PCF8563 RTC chip. The Epson RTC8564
468 should work as well.
469
470 This driver can also be built as a module. If so, the module
471 will be called rtc-pcf8563.
472
473config RTC_DRV_PCF8583
474 tristate "Philips PCF8583"
475 help
476 If you say yes here you get support for the Philips PCF8583
477 RTC chip found on Acorn RiscPCs. This driver supports the
478 platform specific method of retrieving the current year from
479 the RTC's SRAM. It will work on other platforms with the same
480 chip, but the year will probably have to be tweaked.
481
482 This driver can also be built as a module. If so, the module
483 will be called rtc-pcf8583.
484
485config RTC_DRV_M41T80
486 tristate "ST M41T62/65/M41T80/81/82/83/84/85/87 and compatible"
487 help
488 If you say Y here you will get support for the ST M41T60
489 and M41T80 RTC chips series. Currently, the following chips are
490 supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
491 M41ST85, M41ST87, and MicroCrystal RV4162.
492
493 This driver can also be built as a module. If so, the module
494 will be called rtc-m41t80.
495
496config RTC_DRV_M41T80_WDT
497 bool "ST M41T65/M41T80 series RTC watchdog timer"
498 depends on RTC_DRV_M41T80
499 help
500 If you say Y here you will get support for the
501 watchdog timer in the ST M41T60 and M41T80 RTC chips series.
502
503config RTC_DRV_BD70528
504 tristate "ROHM BD71815 and BD71828 PMIC RTC"
505 depends on MFD_ROHM_BD71828
506 help
507 If you say Y here you will get support for the RTC
508 block on ROHM BD71815 and BD71828 Power Management IC.
509
510 This driver can also be built as a module. If so, the module
511 will be called rtc-bd70528.
512
513config RTC_DRV_BQ32K
514 tristate "TI BQ32000"
515 help
516 If you say Y here you will get support for the TI
517 BQ32000 I2C RTC chip.
518
519 This driver can also be built as a module. If so, the module
520 will be called rtc-bq32k.
521
522config RTC_DRV_DM355EVM
523 tristate "TI DaVinci DM355 EVM RTC"
524 depends on MFD_DM355EVM_MSP
525 help
526 Supports the RTC firmware in the MSP430 on the DM355 EVM.
527
528config RTC_DRV_TWL92330
529 bool "TI TWL92330/Menelaus"
530 depends on MENELAUS
531 help
532 If you say yes here you get support for the RTC on the
533 TWL92330 "Menelaus" power management chip, used with OMAP2
534 platforms. The support is integrated with the rest of
535 the Menelaus driver; it's not separate module.
536
537config RTC_DRV_TWL4030
538 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
539 depends on TWL4030_CORE
540 depends on OF
541 help
542 If you say yes here you get support for the RTC on the
543 TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
544
545 This driver can also be built as a module. If so, the module
546 will be called rtc-twl.
547
548config RTC_DRV_PALMAS
549 tristate "TI Palmas RTC driver"
550 depends on MFD_PALMAS
551 help
552 If you say yes here you get support for the RTC of TI PALMA series PMIC
553 chips.
554
555 This driver can also be built as a module. If so, the module
556 will be called rtc-palma.
557
558config RTC_DRV_TPS6586X
559 tristate "TI TPS6586X RTC driver"
560 depends on MFD_TPS6586X
561 help
562 TI Power Management IC TPS6586X supports RTC functionality
563 along with alarm. This driver supports the RTC driver for
564 the TPS6586X RTC module.
565
566config RTC_DRV_TPS65910
567 tristate "TI TPS65910 RTC driver"
568 depends on MFD_TPS65910
569 help
570 If you say yes here you get support for the RTC on the
571 TPS65910 chips.
572
573 This driver can also be built as a module. If so, the module
574 will be called rtc-tps65910.
575
576config RTC_DRV_TPS80031
577 tristate "TI TPS80031/TPS80032 RTC driver"
578 depends on MFD_TPS80031
579 help
580 TI Power Management IC TPS80031 supports RTC functionality
581 along with alarm. This driver supports the RTC driver for
582 the TPS80031 RTC module.
583
584config RTC_DRV_RC5T583
585 tristate "RICOH 5T583 RTC driver"
586 depends on MFD_RC5T583
587 help
588 If you say yes here you get support for the RTC on the
589 RICOH 5T583 chips.
590
591 This driver can also be built as a module. If so, the module
592 will be called rtc-rc5t583.
593
594config RTC_DRV_RC5T619
595 tristate "RICOH RC5T619 RTC driver"
596 depends on MFD_RN5T618
597 help
598 If you say yes here you get support for the RTC on the
599 RICOH RC5T619 chips.
600
601 This driver can also be built as a module. If so, the module
602 will be called rtc-rc5t619.
603
604config RTC_DRV_S35390A
605 tristate "Seiko Instruments S-35390A"
606 select BITREVERSE
607 help
608 If you say yes here you will get support for the Seiko
609 Instruments S-35390A.
610
611 This driver can also be built as a module. If so the module
612 will be called rtc-s35390a.
613
614config RTC_DRV_FM3130
615 tristate "Ramtron FM3130"
616 help
617 If you say Y here you will get support for the
618 Ramtron FM3130 RTC chips.
619 Ramtron FM3130 is a chip with two separate devices inside,
620 RTC clock and FRAM. This driver provides only RTC functionality.
621
622 This driver can also be built as a module. If so the module
623 will be called rtc-fm3130.
624
625config RTC_DRV_RX8010
626 tristate "Epson RX8010SJ"
627 select REGMAP_I2C
628 help
629 If you say yes here you get support for the Epson RX8010SJ RTC
630 chip.
631
632 This driver can also be built as a module. If so, the module
633 will be called rtc-rx8010.
634
635config RTC_DRV_RX8581
636 tristate "Epson RX-8571/RX-8581"
637 select REGMAP_I2C
638 help
639 If you say yes here you will get support for the Epson RX-8571/
640 RX-8581.
641
642 This driver can also be built as a module. If so the module
643 will be called rtc-rx8581.
644
645config RTC_DRV_RX8025
646 tristate "Epson RX-8025SA/NB"
647 help
648 If you say yes here you get support for the Epson
649 RX-8025SA/NB RTC chips.
650
651 This driver can also be built as a module. If so, the module
652 will be called rtc-rx8025.
653
654config RTC_DRV_EM3027
655 tristate "EM Microelectronic EM3027"
656 help
657 If you say yes here you get support for the EM
658 Microelectronic EM3027 RTC chips.
659
660 This driver can also be built as a module. If so, the module
661 will be called rtc-em3027.
662
663config RTC_DRV_RV3028
664 tristate "Micro Crystal RV3028"
665 select REGMAP_I2C
666 help
667 If you say yes here you get support for the Micro Crystal
668 RV3028.
669
670 This driver can also be built as a module. If so, the module
671 will be called rtc-rv3028.
672
673config RTC_DRV_RV3032
674 tristate "Micro Crystal RV3032"
675 select REGMAP_I2C
676 help
677 If you say yes here you get support for the Micro Crystal
678 RV3032.
679
680 This driver can also be built as a module. If so, the module
681 will be called rtc-rv3032.
682
683config RTC_DRV_RV8803
684 tristate "Micro Crystal RV8803, Epson RX8900"
685 help
686 If you say yes here you get support for the Micro Crystal RV8803 and
687 Epson RX8900 RTC chips.
688
689 This driver can also be built as a module. If so, the module
690 will be called rtc-rv8803.
691
692config RTC_DRV_S5M
693 tristate "Samsung S2M/S5M series"
694 depends on MFD_SEC_CORE || COMPILE_TEST
695 select REGMAP_IRQ
696 select REGMAP_I2C
697 help
698 If you say yes here you will get support for the
699 RTC of Samsung S2MPS14 and S5M PMIC series.
700
701 This driver can also be built as a module. If so, the module
702 will be called rtc-s5m.
703
704config RTC_DRV_SD3078
705 tristate "ZXW Shenzhen whwave SD3078"
706 select REGMAP_I2C
707 help
708 If you say yes here you get support for the ZXW Shenzhen whwave
709 SD3078 RTC chips.
710
711 This driver can also be built as a module. If so, the module
712 will be called rtc-sd3078
713
714endif # I2C
715
716comment "SPI RTC drivers"
717
718if SPI_MASTER
719
720config RTC_DRV_M41T93
721 tristate "ST M41T93"
722 help
723 If you say yes here you will get support for the
724 ST M41T93 SPI RTC chip.
725
726 This driver can also be built as a module. If so, the module
727 will be called rtc-m41t93.
728
729config RTC_DRV_M41T94
730 tristate "ST M41T94"
731 help
732 If you say yes here you will get support for the
733 ST M41T94 SPI RTC chip.
734
735 This driver can also be built as a module. If so, the module
736 will be called rtc-m41t94.
737
738config RTC_DRV_DS1302
739 tristate "Dallas/Maxim DS1302"
740 depends on SPI
741 help
742 If you say yes here you get support for the Dallas DS1302 RTC chips.
743
744 This driver can also be built as a module. If so, the module
745 will be called rtc-ds1302.
746
747config RTC_DRV_DS1305
748 tristate "Dallas/Maxim DS1305/DS1306"
749 help
750 Select this driver to get support for the Dallas/Maxim DS1305
751 and DS1306 real time clock chips. These support a trickle
752 charger, alarms, and NVRAM in addition to the clock.
753
754 This driver can also be built as a module. If so, the module
755 will be called rtc-ds1305.
756
757config RTC_DRV_DS1343
758 select REGMAP_SPI
759 tristate "Dallas/Maxim DS1343/DS1344"
760 help
761 If you say yes here you get support for the
762 Dallas/Maxim DS1343 and DS1344 real time clock chips.
763 Support for trickle charger, alarm is provided.
764
765 This driver can also be built as a module. If so, the module
766 will be called rtc-ds1343.
767
768config RTC_DRV_DS1347
769 select REGMAP_SPI
770 tristate "Dallas/Maxim DS1347"
771 help
772 If you say yes here you get support for the
773 Dallas/Maxim DS1347 chips.
774
775 This driver only supports the RTC feature, and not other chip
776 features such as alarms.
777
778 This driver can also be built as a module. If so, the module
779 will be called rtc-ds1347.
780
781config RTC_DRV_DS1390
782 tristate "Dallas/Maxim DS1390/93/94"
783 help
784 If you say yes here you get support for the
785 Dallas/Maxim DS1390/93/94 chips.
786
787 This driver supports the RTC feature and trickle charging but not
788 other chip features such as alarms.
789
790 This driver can also be built as a module. If so, the module
791 will be called rtc-ds1390.
792
793config RTC_DRV_MAX6916
794 tristate "Maxim MAX6916"
795 help
796 If you say yes here you will get support for the
797 Maxim MAX6916 SPI RTC chip.
798
799 This driver only supports the RTC feature, and not other chip
800 features such as alarms.
801
802 This driver can also be built as a module. If so, the module
803 will be called rtc-max6916.
804
805config RTC_DRV_R9701
806 tristate "Epson RTC-9701JE"
807 help
808 If you say yes here you will get support for the
809 Epson RTC-9701JE SPI RTC chip.
810
811 This driver can also be built as a module. If so, the module
812 will be called rtc-r9701.
813
814config RTC_DRV_RX4581
815 tristate "Epson RX-4581"
816 help
817 If you say yes here you will get support for the Epson RX-4581.
818
819 This driver can also be built as a module. If so the module
820 will be called rtc-rx4581.
821
822config RTC_DRV_RS5C348
823 tristate "Ricoh RS5C348A/B"
824 help
825 If you say yes here you get support for the
826 Ricoh RS5C348A and RS5C348B RTC chips.
827
828 This driver can also be built as a module. If so, the module
829 will be called rtc-rs5c348.
830
831config RTC_DRV_MAX6902
832 tristate "Maxim MAX6902"
833 help
834 If you say yes here you will get support for the
835 Maxim MAX6902 SPI RTC chip.
836
837 This driver can also be built as a module. If so, the module
838 will be called rtc-max6902.
839
840config RTC_DRV_PCF2123
841 tristate "NXP PCF2123"
842 select REGMAP_SPI
843 help
844 If you say yes here you get support for the NXP PCF2123
845 RTC chip.
846
847 This driver can also be built as a module. If so, the module
848 will be called rtc-pcf2123.
849
850config RTC_DRV_MCP795
851 tristate "Microchip MCP795"
852 help
853 If you say yes here you will get support for the Microchip MCP795.
854
855 This driver can also be built as a module. If so the module
856 will be called rtc-mcp795.
857
858endif # SPI_MASTER
859
860#
861# Helper to resolve issues with configs that have SPI enabled but I2C
862# modular. See SND_SOC_I2C_AND_SPI for more information
863#
864config RTC_I2C_AND_SPI
865 tristate
866 default m if I2C=m
867 default y if I2C=y
868 default y if SPI_MASTER=y
869
870comment "SPI and I2C RTC drivers"
871
872config RTC_DRV_DS3232
873 tristate "Dallas/Maxim DS3232/DS3234"
874 depends on RTC_I2C_AND_SPI
875 select REGMAP_I2C if I2C
876 select REGMAP_SPI if SPI_MASTER
877 help
878 If you say yes here you get support for Dallas Semiconductor
879 DS3232 and DS3234 real-time clock chips. If an interrupt is associated
880 with the device, the alarm functionality is supported.
881
882 This driver can also be built as a module. If so, the module
883 will be called rtc-ds3232.
884
885config RTC_DRV_DS3232_HWMON
886 bool "HWMON support for Dallas/Maxim DS3232/DS3234"
887 depends on RTC_DRV_DS3232 && HWMON && !(RTC_DRV_DS3232=y && HWMON=m)
888 default y
889 help
890 Say Y here if you want to expose temperature sensor data on
891 rtc-ds3232
892
893config RTC_DRV_PCF2127
894 tristate "NXP PCF2127"
895 depends on RTC_I2C_AND_SPI
896 select REGMAP_I2C if I2C
897 select REGMAP_SPI if SPI_MASTER
898 select WATCHDOG_CORE if WATCHDOG
899 help
900 If you say yes here you get support for the NXP PCF2127/29 RTC
901 chips with integrated quartz crystal for industrial applications.
902 Both chips also have watchdog timer and tamper switch detection
903 features.
904
905 PCF2127 has an additional feature of 512 bytes battery backed
906 memory that's accessible using nvmem interface.
907
908 This driver can also be built as a module. If so, the module
909 will be called rtc-pcf2127.
910
911config RTC_DRV_RV3029C2
912 tristate "Micro Crystal RV3029/3049"
913 depends on RTC_I2C_AND_SPI
914 select REGMAP_I2C if I2C
915 select REGMAP_SPI if SPI_MASTER
916 help
917 If you say yes here you get support for the Micro Crystal
918 RV3029 and RV3049 RTC chips.
919
920 This driver can also be built as a module. If so, the module
921 will be called rtc-rv3029c2.
922
923config RTC_DRV_RV3029_HWMON
924 bool "HWMON support for RV3029/3049"
925 depends on RTC_DRV_RV3029C2 && HWMON
926 depends on !(RTC_DRV_RV3029C2=y && HWMON=m)
927 default y
928 help
929 Say Y here if you want to expose temperature sensor data on
930 rtc-rv3029.
931
932config RTC_DRV_RX6110
933 tristate "Epson RX-6110"
934 depends on RTC_I2C_AND_SPI
935 select REGMAP_SPI if SPI_MASTER
936 select REGMAP_I2C if I2C
937 help
938 If you say yes here you will get support for the Epson RX-6110.
939
940 This driver can also be built as a module. If so the module
941 will be called rtc-rx6110.
942
943comment "Platform RTC drivers"
944
945# this 'CMOS' RTC driver is arch dependent because it requires
946# <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
947# global rtc_lock ... it's not yet just another platform_device.
948
949config RTC_DRV_CMOS
950 tristate "PC-style 'CMOS'"
951 depends on X86 || ARM || PPC || MIPS || SPARC64
952 default y if X86
953 select RTC_MC146818_LIB
954 help
955 Say "yes" here to get direct support for the real time clock
956 found in every PC or ACPI-based system, and some other boards.
957 Specifically the original MC146818, compatibles like those in
958 PC south bridges, the DS12887 or M48T86, some multifunction
959 or LPC bus chips, and so on.
960
961 Your system will need to define the platform device used by
962 this driver, otherwise it won't be accessible. This means
963 you can safely enable this driver if you don't know whether
964 or not your board has this kind of hardware.
965
966 This driver can also be built as a module. If so, the module
967 will be called rtc-cmos.
968
969config RTC_DRV_ALPHA
970 bool "Alpha PC-style CMOS"
971 depends on ALPHA
972 select RTC_MC146818_LIB
973 default y
974 help
975 Direct support for the real-time clock found on every Alpha
976 system, specifically MC146818 compatibles. If in doubt, say Y.
977
978config RTC_DRV_DS1216
979 tristate "Dallas DS1216"
980 depends on SNI_RM
981 help
982 If you say yes here you get support for the Dallas DS1216 RTC chips.
983
984config RTC_DRV_DS1286
985 tristate "Dallas DS1286"
986 depends on HAS_IOMEM
987 help
988 If you say yes here you get support for the Dallas DS1286 RTC chips.
989
990config RTC_DRV_DS1511
991 tristate "Dallas DS1511"
992 depends on HAS_IOMEM
993 help
994 If you say yes here you get support for the
995 Dallas DS1511 timekeeping/watchdog chip.
996
997 This driver can also be built as a module. If so, the module
998 will be called rtc-ds1511.
999
1000config RTC_DRV_DS1553
1001 tristate "Maxim/Dallas DS1553"
1002 depends on HAS_IOMEM
1003 help
1004 If you say yes here you get support for the
1005 Maxim/Dallas DS1553 timekeeping chip.
1006
1007 This driver can also be built as a module. If so, the module
1008 will be called rtc-ds1553.
1009
1010config RTC_DRV_DS1685_FAMILY
1011 tristate "Dallas/Maxim DS1685 Family"
1012 depends on HAS_IOMEM
1013 help
1014 If you say yes here you get support for the Dallas/Maxim DS1685
1015 family of real time chips. This family includes the DS1685/DS1687,
1016 DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and
1017 DS17885/DS17887 chips.
1018
1019 This driver can also be built as a module. If so, the module
1020 will be called rtc-ds1685.
1021
1022choice
1023 prompt "Subtype"
1024 depends on RTC_DRV_DS1685_FAMILY
1025 default RTC_DRV_DS1685
1026
1027config RTC_DRV_DS1685
1028 bool "DS1685/DS1687"
1029 help
1030 This enables support for the Dallas/Maxim DS1685/DS1687 real time
1031 clock chip.
1032
1033 This chip is commonly found in SGI O2 (IP32) and SGI Octane (IP30)
1034 systems, as well as EPPC-405-UC modules by electronic system design
1035 GmbH.
1036
1037config RTC_DRV_DS1689
1038 bool "DS1689/DS1693"
1039 help
1040 This enables support for the Dallas/Maxim DS1689/DS1693 real time
1041 clock chip.
1042
1043 This is an older RTC chip, supplanted by the DS1685/DS1687 above,
1044 which supports a few minor features such as Vcc, Vbat, and Power
1045 Cycle counters, plus a customer-specific, 8-byte ROM/Serial number.
1046
1047 It also works for the even older DS1688/DS1691 RTC chips, which are
1048 virtually the same and carry the same model number. Both chips
1049 have 114 bytes of user NVRAM.
1050
1051config RTC_DRV_DS17285
1052 bool "DS17285/DS17287"
1053 help
1054 This enables support for the Dallas/Maxim DS17285/DS17287 real time
1055 clock chip.
1056
1057 This chip features 2kb of extended NV-SRAM. It may possibly be
1058 found in some SGI O2 systems (rare).
1059
1060config RTC_DRV_DS17485
1061 bool "DS17485/DS17487"
1062 help
1063 This enables support for the Dallas/Maxim DS17485/DS17487 real time
1064 clock chip.
1065
1066 This chip features 4kb of extended NV-SRAM.
1067
1068config RTC_DRV_DS17885
1069 bool "DS17885/DS17887"
1070 help
1071 This enables support for the Dallas/Maxim DS17885/DS17887 real time
1072 clock chip.
1073
1074 This chip features 8kb of extended NV-SRAM.
1075
1076endchoice
1077
1078config RTC_DRV_DS1742
1079 tristate "Maxim/Dallas DS1742/1743"
1080 depends on HAS_IOMEM
1081 help
1082 If you say yes here you get support for the
1083 Maxim/Dallas DS1742/1743 timekeeping chip.
1084
1085 This driver can also be built as a module. If so, the module
1086 will be called rtc-ds1742.
1087
1088config RTC_DRV_DS2404
1089 tristate "Maxim/Dallas DS2404"
1090 help
1091 If you say yes here you get support for the
1092 Dallas DS2404 RTC chip.
1093
1094 This driver can also be built as a module. If so, the module
1095 will be called rtc-ds2404.
1096
1097config RTC_DRV_DA9052
1098 tristate "Dialog DA9052/DA9053 RTC"
1099 depends on PMIC_DA9052
1100 help
1101 Say y here to support the RTC driver for Dialog Semiconductor
1102 DA9052-BC and DA9053-AA/Bx PMICs.
1103
1104config RTC_DRV_DA9055
1105 tristate "Dialog Semiconductor DA9055 RTC"
1106 depends on MFD_DA9055
1107 help
1108 If you say yes here you will get support for the
1109 RTC of the Dialog DA9055 PMIC.
1110
1111 This driver can also be built as a module. If so, the module
1112 will be called rtc-da9055
1113
1114config RTC_DRV_DA9063
1115 tristate "Dialog Semiconductor DA9063/DA9062 RTC"
1116 depends on MFD_DA9063 || MFD_DA9062
1117 help
1118 If you say yes here you will get support for the RTC subsystem
1119 for the Dialog Semiconductor PMIC chips DA9063 and DA9062.
1120
1121 This driver can also be built as a module. If so, the module
1122 will be called "rtc-da9063".
1123
1124config RTC_DRV_EFI
1125 tristate "EFI RTC"
1126 depends on EFI && !X86
1127 help
1128 If you say yes here you will get support for the EFI
1129 Real Time Clock.
1130
1131 This driver can also be built as a module. If so, the module
1132 will be called rtc-efi.
1133
1134config RTC_DRV_STK17TA8
1135 tristate "Simtek STK17TA8"
1136 depends on HAS_IOMEM
1137 help
1138 If you say yes here you get support for the
1139 Simtek STK17TA8 timekeeping chip.
1140
1141 This driver can also be built as a module. If so, the module
1142 will be called rtc-stk17ta8.
1143
1144config RTC_DRV_M48T86
1145 tristate "ST M48T86/Dallas DS12887"
1146 depends on HAS_IOMEM
1147 help
1148 If you say Y here you will get support for the
1149 ST M48T86 and Dallas DS12887 RTC chips.
1150
1151 This driver can also be built as a module. If so, the module
1152 will be called rtc-m48t86.
1153
1154config RTC_DRV_M48T35
1155 tristate "ST M48T35"
1156 depends on HAS_IOMEM
1157 help
1158 If you say Y here you will get support for the
1159 ST M48T35 RTC chip.
1160
1161 This driver can also be built as a module, if so, the module
1162 will be called "rtc-m48t35".
1163
1164config RTC_DRV_M48T59
1165 tristate "ST M48T59/M48T08/M48T02"
1166 depends on HAS_IOMEM
1167 help
1168 If you say Y here you will get support for the
1169 ST M48T59 RTC chip and compatible ST M48T08 and M48T02.
1170
1171 These chips are usually found in Sun SPARC and UltraSPARC
1172 workstations.
1173
1174 This driver can also be built as a module, if so, the module
1175 will be called "rtc-m48t59".
1176
1177config RTC_DRV_MSM6242
1178 tristate "Oki MSM6242"
1179 depends on HAS_IOMEM
1180 help
1181 If you say yes here you get support for the Oki MSM6242
1182 timekeeping chip. It is used in some Amiga models (e.g. A2000).
1183
1184 This driver can also be built as a module. If so, the module
1185 will be called rtc-msm6242.
1186
1187config RTC_DRV_BQ4802
1188 tristate "TI BQ4802"
1189 depends on HAS_IOMEM
1190 help
1191 If you say Y here you will get support for the TI
1192 BQ4802 RTC chip.
1193
1194 This driver can also be built as a module. If so, the module
1195 will be called rtc-bq4802.
1196
1197config RTC_DRV_RP5C01
1198 tristate "Ricoh RP5C01"
1199 depends on HAS_IOMEM
1200 help
1201 If you say yes here you get support for the Ricoh RP5C01
1202 timekeeping chip. It is used in some Amiga models (e.g. A3000
1203 and A4000).
1204
1205 This driver can also be built as a module. If so, the module
1206 will be called rtc-rp5c01.
1207
1208config RTC_DRV_V3020
1209 tristate "EM Microelectronic V3020"
1210 help
1211 If you say yes here you will get support for the
1212 EM Microelectronic v3020 RTC chip.
1213
1214 This driver can also be built as a module. If so, the module
1215 will be called rtc-v3020.
1216
1217config RTC_DRV_WM831X
1218 tristate "Wolfson Microelectronics WM831x RTC"
1219 depends on MFD_WM831X
1220 help
1221 If you say yes here you will get support for the RTC subsystem
1222 of the Wolfson Microelectronics WM831X series PMICs.
1223
1224 This driver can also be built as a module. If so, the module
1225 will be called "rtc-wm831x".
1226
1227config RTC_DRV_WM8350
1228 tristate "Wolfson Microelectronics WM8350 RTC"
1229 depends on MFD_WM8350
1230 help
1231 If you say yes here you will get support for the RTC subsystem
1232 of the Wolfson Microelectronics WM8350.
1233
1234 This driver can also be built as a module. If so, the module
1235 will be called "rtc-wm8350".
1236
1237config RTC_DRV_SC27XX
1238 tristate "Spreadtrum SC27xx RTC"
1239 depends on MFD_SC27XX_PMIC || COMPILE_TEST
1240 help
1241 If you say Y here you will get support for the RTC subsystem
1242 of the Spreadtrum SC27xx series PMICs. The SC27xx series PMICs
1243 includes the SC2720, SC2721, SC2723, SC2730 and SC2731 chips.
1244
1245 This driver can also be built as a module. If so, the module
1246 will be called rtc-sc27xx.
1247
1248config RTC_DRV_SPEAR
1249 tristate "SPEAR ST RTC"
1250 depends on PLAT_SPEAR || COMPILE_TEST
1251 default y
1252 help
1253 If you say Y here you will get support for the RTC found on
1254 spear
1255
1256config RTC_DRV_PCF50633
1257 depends on MFD_PCF50633
1258 tristate "NXP PCF50633 RTC"
1259 help
1260 If you say yes here you get support for the RTC subsystem of the
1261 NXP PCF50633 used in embedded systems.
1262
1263config RTC_DRV_AB8500
1264 tristate "ST-Ericsson AB8500 RTC"
1265 depends on AB8500_CORE
1266 select RTC_INTF_DEV
1267 select RTC_INTF_DEV_UIE_EMUL
1268 help
1269 Select this to enable the ST-Ericsson AB8500 power management IC RTC
1270 support. This chip contains a battery- and capacitor-backed RTC.
1271
1272config RTC_DRV_OPAL
1273 tristate "IBM OPAL RTC driver"
1274 depends on PPC_POWERNV
1275 default y
1276 help
1277 If you say yes here you get support for the PowerNV platform RTC
1278 driver based on OPAL interfaces.
1279
1280 This driver can also be built as a module. If so, the module
1281 will be called rtc-opal.
1282
1283config RTC_DRV_ZYNQMP
1284 tristate "Xilinx Zynq Ultrascale+ MPSoC RTC"
1285 depends on OF && HAS_IOMEM
1286 help
1287 If you say yes here you get support for the RTC controller found on
1288 Xilinx Zynq Ultrascale+ MPSoC.
1289
1290config RTC_DRV_CROS_EC
1291 tristate "Chrome OS EC RTC driver"
1292 depends on CROS_EC
1293 help
1294 If you say yes here you will get support for the
1295 Chrome OS Embedded Controller's RTC.
1296
1297 This driver can also be built as a module. If so, the module
1298 will be called rtc-cros-ec.
1299
1300config RTC_DRV_NTXEC
1301 tristate "Netronix embedded controller RTC"
1302 depends on MFD_NTXEC
1303 help
1304 Say yes here if you want to support the RTC functionality of the
1305 embedded controller found in certain e-book readers designed by the
1306 original design manufacturer Netronix.
1307
1308comment "on-CPU RTC drivers"
1309
1310config RTC_DRV_ASM9260
1311 tristate "Alphascale asm9260 RTC"
1312 depends on MACH_ASM9260 || COMPILE_TEST
1313 help
1314 If you say yes here you get support for the RTC on the
1315 Alphascale asm9260 SoC.
1316
1317 This driver can also be built as a module. If so, the module
1318 will be called rtc-asm9260.
1319
1320config RTC_DRV_DAVINCI
1321 tristate "TI DaVinci RTC"
1322 depends on ARCH_DAVINCI_DM365 || COMPILE_TEST
1323 help
1324 If you say yes here you get support for the RTC on the
1325 DaVinci platforms (DM365).
1326
1327 This driver can also be built as a module. If so, the module
1328 will be called rtc-davinci.
1329
1330config RTC_DRV_DIGICOLOR
1331 tristate "Conexant Digicolor RTC"
1332 depends on ARCH_DIGICOLOR || COMPILE_TEST
1333 help
1334 If you say yes here you get support for the RTC on Conexant
1335 Digicolor platforms. This currently includes the CX92755 SoC.
1336
1337 This driver can also be built as a module. If so, the module
1338 will be called rtc-digicolor.
1339
1340config RTC_DRV_IMXDI
1341 tristate "Freescale IMX DryIce Real Time Clock"
1342 depends on ARCH_MXC
1343 depends on OF
1344 help
1345 Support for Freescale IMX DryIce RTC
1346
1347 This driver can also be built as a module, if so, the module
1348 will be called "rtc-imxdi".
1349
1350config RTC_DRV_FSL_FTM_ALARM
1351 tristate "Freescale FlexTimer alarm timer"
1352 depends on ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
1353 help
1354 For the FlexTimer in LS1012A, LS1021A, LS1028A, LS1043A, LS1046A,
1355 LS1088A, LS208xA, we can use FTM as the wakeup source.
1356
1357 Say y here to enable FTM alarm support. The FTM alarm provides
1358 alarm functions for wakeup system from deep sleep.
1359
1360 This driver can also be built as a module, if so, the module
1361 will be called "rtc-fsl-ftm-alarm".
1362
1363config RTC_DRV_MESON
1364 tristate "Amlogic Meson RTC"
1365 depends on (ARM && ARCH_MESON) || COMPILE_TEST
1366 select REGMAP_MMIO
1367 help
1368 Support for the RTC block on the Amlogic Meson6, Meson8, Meson8b
1369 and Meson8m2 SoCs.
1370
1371 This driver can also be built as a module, if so, the module
1372 will be called "rtc-meson".
1373
1374config RTC_DRV_MESON_VRTC
1375 tristate "Amlogic Meson Virtual RTC"
1376 depends on ARCH_MESON || COMPILE_TEST
1377 default m if ARCH_MESON
1378 help
1379 If you say yes here you will get support for the
1380 Virtual RTC of Amlogic SoCs.
1381
1382 This driver can also be built as a module. If so, the module
1383 will be called rtc-meson-vrtc.
1384
1385config RTC_DRV_OMAP
1386 tristate "TI OMAP Real Time Clock"
1387 depends on ARCH_OMAP || ARCH_DAVINCI || COMPILE_TEST
1388 depends on OF
1389 depends on PINCTRL
1390 select GENERIC_PINCONF
1391 help
1392 Say "yes" here to support the on chip real time clock
1393 present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx.
1394
1395 This driver can also be built as a module, if so, module
1396 will be called rtc-omap.
1397
1398config HAVE_S3C_RTC
1399 bool
1400 help
1401 This will include RTC support for Samsung SoCs. If
1402 you want to include RTC support for any machine, kindly
1403 select this in the respective mach-XXXX/Kconfig file.
1404
1405config RTC_DRV_S3C
1406 tristate "Samsung S3C series SoC RTC"
1407 depends on ARCH_S3C64XX || HAVE_S3C_RTC || COMPILE_TEST
1408 help
1409 RTC (Realtime Clock) driver for the clock inbuilt into the
1410 Samsung S3C24XX series of SoCs. This can provide periodic
1411 interrupt rates from 1Hz to 64Hz for user programs, and
1412 wakeup from Alarm.
1413
1414 The driver currently supports the common features on all the
1415 S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
1416 and S3C2442.
1417
1418 This driver can also be build as a module. If so, the module
1419 will be called rtc-s3c.
1420
1421config RTC_DRV_EP93XX
1422 tristate "Cirrus Logic EP93XX"
1423 depends on ARCH_EP93XX || COMPILE_TEST
1424 help
1425 If you say yes here you get support for the
1426 RTC embedded in the Cirrus Logic EP93XX processors.
1427
1428 This driver can also be built as a module. If so, the module
1429 will be called rtc-ep93xx.
1430
1431config RTC_DRV_SA1100
1432 tristate "SA11x0/PXA2xx/PXA910"
1433 depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
1434 help
1435 If you say Y here you will get access to the real time clock
1436 built into your SA11x0 or PXA2xx CPU.
1437
1438 To compile this driver as a module, choose M here: the
1439 module will be called rtc-sa1100.
1440
1441config RTC_DRV_SH
1442 tristate "SuperH On-Chip RTC"
1443 depends on SUPERH || ARCH_RENESAS
1444 help
1445 Say Y here to enable support for the on-chip RTC found in
1446 most SuperH processors. This RTC is also found in RZ/A SoCs.
1447
1448 To compile this driver as a module, choose M here: the
1449 module will be called rtc-sh.
1450
1451config RTC_DRV_VR41XX
1452 tristate "NEC VR41XX"
1453 depends on CPU_VR41XX || COMPILE_TEST
1454 help
1455 If you say Y here you will get access to the real time clock
1456 built into your NEC VR41XX CPU.
1457
1458 To compile this driver as a module, choose M here: the
1459 module will be called rtc-vr41xx.
1460
1461config RTC_DRV_PL030
1462 tristate "ARM AMBA PL030 RTC"
1463 depends on ARM_AMBA
1464 help
1465 If you say Y here you will get access to ARM AMBA
1466 PrimeCell PL030 RTC found on certain ARM SOCs.
1467
1468 To compile this driver as a module, choose M here: the
1469 module will be called rtc-pl030.
1470
1471config RTC_DRV_PL031
1472 tristate "ARM AMBA PL031 RTC"
1473 depends on ARM_AMBA
1474 help
1475 If you say Y here you will get access to ARM AMBA
1476 PrimeCell PL031 RTC found on certain ARM SOCs.
1477
1478 To compile this driver as a module, choose M here: the
1479 module will be called rtc-pl031.
1480
1481config RTC_DRV_AT91RM9200
1482 tristate "AT91RM9200 or some AT91SAM9 RTC"
1483 depends on ARCH_AT91 || COMPILE_TEST
1484 depends on OF
1485 help
1486 Driver for the internal RTC (Realtime Clock) module found on
1487 Atmel AT91RM9200's and some AT91SAM9 chips. On AT91SAM9 chips
1488 this is powered by the backup power supply.
1489
1490config RTC_DRV_AT91SAM9
1491 tristate "AT91SAM9 RTT as RTC"
1492 depends on ARCH_AT91 || COMPILE_TEST
1493 depends on OF && HAS_IOMEM
1494 select MFD_SYSCON
1495 help
1496 Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
1497 can be used as an RTC thanks to the backup power supply (e.g. a
1498 small coin cell battery) which keeps this block and the GPBR
1499 (General Purpose Backup Registers) block powered when the device
1500 is shutdown.
1501 Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd
1502 probably want to use the real RTC block instead of the "RTT as an
1503 RTC" driver.
1504
1505config RTC_DRV_AU1XXX
1506 tristate "Au1xxx Counter0 RTC support"
1507 depends on MIPS_ALCHEMY
1508 help
1509 This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
1510 counter) to be used as a RTC.
1511
1512 This driver can also be built as a module. If so, the module
1513 will be called rtc-au1xxx.
1514
1515config RTC_DRV_RS5C313
1516 tristate "Ricoh RS5C313"
1517 depends on SH_LANDISK
1518 help
1519 If you say yes here you get support for the Ricoh RS5C313 RTC chips.
1520
1521config RTC_DRV_GENERIC
1522 tristate "Generic RTC support"
1523 # Please consider writing a new RTC driver instead of using the generic
1524 # RTC abstraction
1525 depends on PARISC || M68K || PPC || SUPERH || COMPILE_TEST
1526 help
1527 Say Y or M here to enable RTC support on systems using the generic
1528 RTC abstraction. If you do not know what you are doing, you should
1529 just say Y.
1530
1531config RTC_DRV_PXA
1532 tristate "PXA27x/PXA3xx"
1533 depends on ARCH_PXA
1534 select RTC_DRV_SA1100
1535 help
1536 If you say Y here you will get access to the real time clock
1537 built into your PXA27x or PXA3xx CPU. This RTC is actually 2 RTCs
1538 consisting of an SA1100 compatible RTC and the extended PXA RTC.
1539
1540 This RTC driver uses PXA RTC registers available since pxa27x
1541 series (RDxR, RYxR) instead of legacy RCNR, RTAR.
1542
1543config RTC_DRV_VT8500
1544 tristate "VIA/WonderMedia 85xx SoC RTC"
1545 depends on ARCH_VT8500 || COMPILE_TEST
1546 help
1547 If you say Y here you will get access to the real time clock
1548 built into your VIA VT8500 SoC or its relatives.
1549
1550
1551config RTC_DRV_SUN4V
1552 bool "SUN4V Hypervisor RTC"
1553 depends on SPARC64
1554 help
1555 If you say Y here you will get support for the Hypervisor
1556 based RTC on SUN4V systems.
1557
1558config RTC_DRV_SUN6I
1559 bool "Allwinner A31 RTC"
1560 default MACH_SUN6I || MACH_SUN8I
1561 depends on COMMON_CLK
1562 depends on ARCH_SUNXI || COMPILE_TEST
1563 help
1564 If you say Y here you will get support for the RTC found in
1565 some Allwinner SoCs like the A31 or the A64.
1566
1567config RTC_DRV_SUNXI
1568 tristate "Allwinner sun4i/sun7i RTC"
1569 depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
1570 help
1571 If you say Y here you will get support for the RTC found on
1572 Allwinner A10/A20.
1573
1574config RTC_DRV_STARFIRE
1575 bool "Starfire RTC"
1576 depends on SPARC64
1577 help
1578 If you say Y here you will get support for the RTC found on
1579 Starfire systems.
1580
1581config RTC_DRV_MV
1582 tristate "Marvell SoC RTC"
1583 depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST
1584 help
1585 If you say yes here you will get support for the in-chip RTC
1586 that can be found in some of Marvell's SoC devices, such as
1587 the Kirkwood 88F6281 and 88F6192.
1588
1589 This driver can also be built as a module. If so, the module
1590 will be called rtc-mv.
1591
1592config RTC_DRV_ARMADA38X
1593 tristate "Armada 38x Marvell SoC RTC"
1594 depends on ARCH_MVEBU || COMPILE_TEST
1595 depends on OF
1596 help
1597 If you say yes here you will get support for the in-chip RTC
1598 that can be found in the Armada 38x Marvell's SoC device
1599
1600 This driver can also be built as a module. If so, the module
1601 will be called armada38x-rtc.
1602
1603config RTC_DRV_CADENCE
1604 tristate "Cadence RTC driver"
1605 depends on OF && HAS_IOMEM
1606 help
1607 If you say Y here you will get access to Cadence RTC IP
1608 found on certain SOCs.
1609
1610 To compile this driver as a module, choose M here: the
1611 module will be called rtc-cadence.
1612
1613config RTC_DRV_FTRTC010
1614 tristate "Faraday Technology FTRTC010 RTC"
1615 depends on HAS_IOMEM
1616 default ARCH_GEMINI
1617 help
1618 If you say Y here you will get support for the
1619 Faraday Technolog FTRTC010 found on e.g. Gemini SoC's.
1620
1621 This driver can also be built as a module. If so, the module
1622 will be called rtc-ftrtc010.
1623
1624config RTC_DRV_PS3
1625 tristate "PS3 RTC"
1626 depends on PPC_PS3
1627 help
1628 If you say yes here you will get support for the RTC on PS3.
1629
1630 This driver can also be built as a module. If so, the module
1631 will be called rtc-ps3.
1632
1633config RTC_DRV_STMP
1634 tristate "Freescale STMP3xxx/i.MX23/i.MX28 RTC"
1635 depends on ARCH_MXS || COMPILE_TEST
1636 select STMP_DEVICE
1637 help
1638 If you say yes here you will get support for the onboard
1639 STMP3xxx/i.MX23/i.MX28 RTC.
1640
1641 This driver can also be built as a module. If so, the module
1642 will be called rtc-stmp3xxx.
1643
1644config RTC_DRV_PCAP
1645 tristate "PCAP RTC"
1646 depends on EZX_PCAP
1647 help
1648 If you say Y here you will get support for the RTC found on
1649 the PCAP2 ASIC used on some Motorola phones.
1650
1651config RTC_DRV_MC13XXX
1652 depends on MFD_MC13XXX
1653 tristate "Freescale MC13xxx RTC"
1654 help
1655 This enables support for the RTCs found on Freescale's PMICs
1656 MC13783 and MC13892.
1657
1658config RTC_DRV_MPC5121
1659 tristate "Freescale MPC5121 built-in RTC"
1660 depends on PPC_MPC512x || PPC_MPC52xx
1661 help
1662 If you say yes here you will get support for the
1663 built-in RTC on MPC5121 or on MPC5200.
1664
1665 This driver can also be built as a module. If so, the module
1666 will be called rtc-mpc5121.
1667
1668config RTC_DRV_JZ4740
1669 tristate "Ingenic JZ4740 SoC"
1670 depends on MIPS || COMPILE_TEST
1671 depends on OF
1672 help
1673 If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
1674 controllers.
1675
1676 This driver can also be built as a module. If so, the module
1677 will be called rtc-jz4740.
1678
1679config RTC_DRV_LPC24XX
1680 tristate "NXP RTC for LPC178x/18xx/408x/43xx"
1681 depends on ARCH_LPC18XX || COMPILE_TEST
1682 depends on OF && HAS_IOMEM
1683 help
1684 This enables support for the NXP RTC found which can be found on
1685 NXP LPC178x/18xx/408x/43xx devices.
1686
1687 If you have one of the devices above enable this driver to use
1688 the hardware RTC. This driver can also be built as a module. If
1689 so, the module will be called rtc-lpc24xx.
1690
1691config RTC_DRV_LPC32XX
1692 depends on ARCH_LPC32XX || COMPILE_TEST
1693 tristate "NXP LPC32XX RTC"
1694 help
1695 This enables support for the NXP RTC in the LPC32XX
1696
1697 This driver can also be built as a module. If so, the module
1698 will be called rtc-lpc32xx.
1699
1700config RTC_DRV_PM8XXX
1701 tristate "Qualcomm PMIC8XXX RTC"
1702 depends on MFD_PM8XXX || MFD_SPMI_PMIC || COMPILE_TEST
1703 help
1704 If you say yes here you get support for the
1705 Qualcomm PMIC8XXX RTC.
1706
1707 To compile this driver as a module, choose M here: the
1708 module will be called rtc-pm8xxx.
1709
1710config RTC_DRV_TEGRA
1711 tristate "NVIDIA Tegra Internal RTC driver"
1712 depends on ARCH_TEGRA || COMPILE_TEST
1713 help
1714 If you say yes here you get support for the
1715 Tegra 200 series internal RTC module.
1716
1717 This drive can also be built as a module. If so, the module
1718 will be called rtc-tegra.
1719
1720config RTC_DRV_LOONGSON1
1721 tristate "loongson1 RTC support"
1722 depends on MACH_LOONGSON32
1723 help
1724 This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year
1725 counter) to be used as a RTC.
1726
1727 This driver can also be built as a module. If so, the module
1728 will be called rtc-ls1x.
1729
1730config RTC_DRV_MXC
1731 tristate "Freescale MXC Real Time Clock"
1732 depends on ARCH_MXC || COMPILE_TEST
1733 depends on HAS_IOMEM
1734 depends on OF
1735 help
1736 If you say yes here you get support for the Freescale MXC
1737 RTC module.
1738
1739 This driver can also be built as a module, if so, the module
1740 will be called "rtc-mxc".
1741
1742config RTC_DRV_MXC_V2
1743 tristate "Freescale MXC Real Time Clock for i.MX53"
1744 depends on ARCH_MXC || COMPILE_TEST
1745 depends on HAS_IOMEM
1746 depends on OF
1747 help
1748 If you say yes here you get support for the Freescale MXC
1749 SRTC module in i.MX53 processor.
1750
1751 This driver can also be built as a module, if so, the module
1752 will be called "rtc-mxc_v2".
1753
1754config RTC_DRV_SNVS
1755 tristate "Freescale SNVS RTC support"
1756 select REGMAP_MMIO
1757 depends on ARCH_MXC || COMPILE_TEST
1758 depends on HAS_IOMEM
1759 depends on OF
1760 help
1761 If you say yes here you get support for the Freescale SNVS
1762 Low Power (LP) RTC module.
1763
1764 This driver can also be built as a module, if so, the module
1765 will be called "rtc-snvs".
1766
1767config RTC_DRV_IMX_SC
1768 depends on IMX_SCU
1769 depends on HAVE_ARM_SMCCC
1770 tristate "NXP i.MX System Controller RTC support"
1771 help
1772 If you say yes here you get support for the NXP i.MX System
1773 Controller RTC module.
1774
1775config RTC_DRV_ST_LPC
1776 tristate "STMicroelectronics LPC RTC"
1777 depends on ARCH_STI
1778 depends on OF
1779 help
1780 Say Y here to include STMicroelectronics Low Power Controller
1781 (LPC) based RTC support.
1782
1783 To compile this driver as a module, choose M here: the
1784 module will be called rtc-st-lpc.
1785
1786config RTC_DRV_MOXART
1787 tristate "MOXA ART RTC"
1788 depends on ARCH_MOXART || COMPILE_TEST
1789 help
1790 If you say yes here you get support for the MOXA ART
1791 RTC module.
1792
1793 This driver can also be built as a module. If so, the module
1794 will be called rtc-moxart
1795
1796config RTC_DRV_MT2712
1797 tristate "MediaTek MT2712 SoC based RTC"
1798 depends on ARCH_MEDIATEK || COMPILE_TEST
1799 help
1800 This enables support for the real time clock built in the MediaTek
1801 SoCs for MT2712.
1802
1803 This drive can also be built as a module. If so, the module
1804 will be called rtc-mt2712.
1805
1806config RTC_DRV_MT6397
1807 tristate "MediaTek PMIC based RTC"
1808 depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
1809 help
1810 This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
1811 MT6397 PMIC. You should enable MT6397 PMIC MFD before select
1812 MediaTek(R) RTC driver.
1813
1814 If you want to use MediaTek(R) RTC interface, select Y or M here.
1815
1816config RTC_DRV_MT7622
1817 tristate "MediaTek SoC based RTC"
1818 depends on ARCH_MEDIATEK || COMPILE_TEST
1819 help
1820 This enables support for the real time clock built in the MediaTek
1821 SoCs.
1822
1823 This drive can also be built as a module. If so, the module
1824 will be called rtc-mt7622.
1825
1826config RTC_DRV_XGENE
1827 tristate "APM X-Gene RTC"
1828 depends on HAS_IOMEM
1829 depends on ARCH_XGENE || COMPILE_TEST
1830 help
1831 If you say yes here you get support for the APM X-Gene SoC real time
1832 clock.
1833
1834 This driver can also be built as a module, if so, the module
1835 will be called "rtc-xgene".
1836
1837config RTC_DRV_PIC32
1838 tristate "Microchip PIC32 RTC"
1839 depends on MACH_PIC32
1840 default y
1841 help
1842 If you say yes here you get support for the PIC32 RTC module.
1843
1844 This driver can also be built as a module. If so, the module
1845 will be called rtc-pic32
1846
1847config RTC_DRV_R7301
1848 tristate "EPSON TOYOCOM RTC-7301SF/DG"
1849 select REGMAP_MMIO
1850 depends on OF && HAS_IOMEM
1851 help
1852 If you say yes here you get support for the EPSON TOYOCOM
1853 RTC-7301SF/DG chips.
1854
1855 This driver can also be built as a module. If so, the module
1856 will be called rtc-r7301.
1857
1858config RTC_DRV_STM32
1859 tristate "STM32 RTC"
1860 select REGMAP_MMIO
1861 depends on ARCH_STM32 || COMPILE_TEST
1862 help
1863 If you say yes here you get support for the STM32 On-Chip
1864 Real Time Clock.
1865
1866 This driver can also be built as a module, if so, the module
1867 will be called "rtc-stm32".
1868
1869config RTC_DRV_CPCAP
1870 depends on MFD_CPCAP
1871 tristate "Motorola CPCAP RTC"
1872 help
1873 Say y here for CPCAP rtc found on some Motorola phones
1874 and tablets such as Droid 4.
1875
1876config RTC_DRV_RTD119X
1877 bool "Realtek RTD129x RTC"
1878 depends on ARCH_REALTEK || COMPILE_TEST
1879 default ARCH_REALTEK
1880 help
1881 If you say yes here, you get support for the RTD1295 SoC
1882 Real Time Clock.
1883
1884config RTC_DRV_ASPEED
1885 tristate "ASPEED RTC"
1886 depends on OF
1887 depends on ARCH_ASPEED || COMPILE_TEST
1888 help
1889 If you say yes here you get support for the ASPEED BMC SoC real time
1890 clocks.
1891
1892 This driver can also be built as a module, if so, the module
1893 will be called "rtc-aspeed".
1894
1895comment "HID Sensor RTC drivers"
1896
1897config RTC_DRV_HID_SENSOR_TIME
1898 tristate "HID Sensor Time"
1899 depends on USB_HID
1900 depends on HID_SENSOR_HUB && IIO
1901 select HID_SENSOR_IIO_COMMON
1902 help
1903 Say yes here to build support for the HID Sensors of type Time.
1904 This drivers makes such sensors available as RTCs.
1905
1906 If this driver is compiled as a module, it will be named
1907 rtc-hid-sensor-time.
1908
1909config RTC_DRV_GOLDFISH
1910 tristate "Goldfish Real Time Clock"
1911 depends on HAS_IOMEM
1912 help
1913 Say yes to enable RTC driver for the Goldfish based virtual platform.
1914
1915 Goldfish is a code name for the virtual platform developed by Google
1916 for Android emulation.
1917
1918config RTC_DRV_WILCO_EC
1919 tristate "Wilco EC RTC"
1920 depends on WILCO_EC
1921 default m
1922 help
1923 If you say yes here, you get read/write support for the Real Time
1924 Clock on the Wilco Embedded Controller (Wilco is a kind of Chromebook)
1925
1926 This can also be built as a module. If so, the module will
1927 be named "rtc_wilco_ec".
1928
1929endif # RTC_CLASS