Loading...
1/*
2 * core.c - ChipIdea USB IP core family device controller
3 *
4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
5 *
6 * Author: David Lopo
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13/*
14 * Description: ChipIdea USB IP core family device controller
15 *
16 * This driver is composed of several blocks:
17 * - HW: hardware interface
18 * - DBG: debug facilities (optional)
19 * - UTIL: utilities
20 * - ISR: interrupts handling
21 * - ENDPT: endpoint operations (Gadget API)
22 * - GADGET: gadget operations (Gadget API)
23 * - BUS: bus glue code, bus abstraction layer
24 *
25 * Compile Options
26 * - STALL_IN: non-empty bulk-in pipes cannot be halted
27 * if defined mass storage compliance succeeds but with warnings
28 * => case 4: Hi > Dn
29 * => case 5: Hi > Di
30 * => case 8: Hi <> Do
31 * if undefined usbtest 13 fails
32 * - TRACE: enable function tracing (depends on DEBUG)
33 *
34 * Main Features
35 * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
36 * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
37 * - Normal & LPM support
38 *
39 * USBTEST Report
40 * - OK: 0-12, 13 (STALL_IN defined) & 14
41 * - Not Supported: 15 & 16 (ISO)
42 *
43 * TODO List
44 * - Suspend & Remote Wakeup
45 */
46#include <linux/delay.h>
47#include <linux/device.h>
48#include <linux/dma-mapping.h>
49#include <linux/extcon.h>
50#include <linux/phy/phy.h>
51#include <linux/platform_device.h>
52#include <linux/module.h>
53#include <linux/idr.h>
54#include <linux/interrupt.h>
55#include <linux/io.h>
56#include <linux/kernel.h>
57#include <linux/slab.h>
58#include <linux/pm_runtime.h>
59#include <linux/usb/ch9.h>
60#include <linux/usb/gadget.h>
61#include <linux/usb/otg.h>
62#include <linux/usb/chipidea.h>
63#include <linux/usb/of.h>
64#include <linux/of.h>
65#include <linux/phy.h>
66#include <linux/regulator/consumer.h>
67#include <linux/usb/ehci_def.h>
68
69#include "ci.h"
70#include "udc.h"
71#include "bits.h"
72#include "host.h"
73#include "otg.h"
74#include "otg_fsm.h"
75
76/* Controller register map */
77static const u8 ci_regs_nolpm[] = {
78 [CAP_CAPLENGTH] = 0x00U,
79 [CAP_HCCPARAMS] = 0x08U,
80 [CAP_DCCPARAMS] = 0x24U,
81 [CAP_TESTMODE] = 0x38U,
82 [OP_USBCMD] = 0x00U,
83 [OP_USBSTS] = 0x04U,
84 [OP_USBINTR] = 0x08U,
85 [OP_DEVICEADDR] = 0x14U,
86 [OP_ENDPTLISTADDR] = 0x18U,
87 [OP_TTCTRL] = 0x1CU,
88 [OP_BURSTSIZE] = 0x20U,
89 [OP_PORTSC] = 0x44U,
90 [OP_DEVLC] = 0x84U,
91 [OP_OTGSC] = 0x64U,
92 [OP_USBMODE] = 0x68U,
93 [OP_ENDPTSETUPSTAT] = 0x6CU,
94 [OP_ENDPTPRIME] = 0x70U,
95 [OP_ENDPTFLUSH] = 0x74U,
96 [OP_ENDPTSTAT] = 0x78U,
97 [OP_ENDPTCOMPLETE] = 0x7CU,
98 [OP_ENDPTCTRL] = 0x80U,
99};
100
101static const u8 ci_regs_lpm[] = {
102 [CAP_CAPLENGTH] = 0x00U,
103 [CAP_HCCPARAMS] = 0x08U,
104 [CAP_DCCPARAMS] = 0x24U,
105 [CAP_TESTMODE] = 0xFCU,
106 [OP_USBCMD] = 0x00U,
107 [OP_USBSTS] = 0x04U,
108 [OP_USBINTR] = 0x08U,
109 [OP_DEVICEADDR] = 0x14U,
110 [OP_ENDPTLISTADDR] = 0x18U,
111 [OP_TTCTRL] = 0x1CU,
112 [OP_BURSTSIZE] = 0x20U,
113 [OP_PORTSC] = 0x44U,
114 [OP_DEVLC] = 0x84U,
115 [OP_OTGSC] = 0xC4U,
116 [OP_USBMODE] = 0xC8U,
117 [OP_ENDPTSETUPSTAT] = 0xD8U,
118 [OP_ENDPTPRIME] = 0xDCU,
119 [OP_ENDPTFLUSH] = 0xE0U,
120 [OP_ENDPTSTAT] = 0xE4U,
121 [OP_ENDPTCOMPLETE] = 0xE8U,
122 [OP_ENDPTCTRL] = 0xECU,
123};
124
125static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
126{
127 int i;
128
129 for (i = 0; i < OP_ENDPTCTRL; i++)
130 ci->hw_bank.regmap[i] =
131 (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
132 (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
133
134 for (; i <= OP_LAST; i++)
135 ci->hw_bank.regmap[i] = ci->hw_bank.op +
136 4 * (i - OP_ENDPTCTRL) +
137 (is_lpm
138 ? ci_regs_lpm[OP_ENDPTCTRL]
139 : ci_regs_nolpm[OP_ENDPTCTRL]);
140
141}
142
143static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
144{
145 int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
146 enum ci_revision rev = CI_REVISION_UNKNOWN;
147
148 if (ver == 0x2) {
149 rev = hw_read_id_reg(ci, ID_ID, REVISION)
150 >> __ffs(REVISION);
151 rev += CI_REVISION_20;
152 } else if (ver == 0x0) {
153 rev = CI_REVISION_1X;
154 }
155
156 return rev;
157}
158
159/**
160 * hw_read_intr_enable: returns interrupt enable register
161 *
162 * @ci: the controller
163 *
164 * This function returns register data
165 */
166u32 hw_read_intr_enable(struct ci_hdrc *ci)
167{
168 return hw_read(ci, OP_USBINTR, ~0);
169}
170
171/**
172 * hw_read_intr_status: returns interrupt status register
173 *
174 * @ci: the controller
175 *
176 * This function returns register data
177 */
178u32 hw_read_intr_status(struct ci_hdrc *ci)
179{
180 return hw_read(ci, OP_USBSTS, ~0);
181}
182
183/**
184 * hw_port_test_set: writes port test mode (execute without interruption)
185 * @mode: new value
186 *
187 * This function returns an error code
188 */
189int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
190{
191 const u8 TEST_MODE_MAX = 7;
192
193 if (mode > TEST_MODE_MAX)
194 return -EINVAL;
195
196 hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
197 return 0;
198}
199
200/**
201 * hw_port_test_get: reads port test mode value
202 *
203 * @ci: the controller
204 *
205 * This function returns port test mode value
206 */
207u8 hw_port_test_get(struct ci_hdrc *ci)
208{
209 return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
210}
211
212static void hw_wait_phy_stable(void)
213{
214 /*
215 * The phy needs some delay to output the stable status from low
216 * power mode. And for OTGSC, the status inputs are debounced
217 * using a 1 ms time constant, so, delay 2ms for controller to get
218 * the stable status, like vbus and id when the phy leaves low power.
219 */
220 usleep_range(2000, 2500);
221}
222
223/* The PHY enters/leaves low power mode */
224static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
225{
226 enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
227 bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
228
229 if (enable && !lpm)
230 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
231 PORTSC_PHCD(ci->hw_bank.lpm));
232 else if (!enable && lpm)
233 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
234 0);
235}
236
237static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
238{
239 u32 reg;
240
241 /* bank is a module variable */
242 ci->hw_bank.abs = base;
243
244 ci->hw_bank.cap = ci->hw_bank.abs;
245 ci->hw_bank.cap += ci->platdata->capoffset;
246 ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
247
248 hw_alloc_regmap(ci, false);
249 reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
250 __ffs(HCCPARAMS_LEN);
251 ci->hw_bank.lpm = reg;
252 if (reg)
253 hw_alloc_regmap(ci, !!reg);
254 ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
255 ci->hw_bank.size += OP_LAST;
256 ci->hw_bank.size /= sizeof(u32);
257
258 reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
259 __ffs(DCCPARAMS_DEN);
260 ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */
261
262 if (ci->hw_ep_max > ENDPT_MAX)
263 return -ENODEV;
264
265 ci_hdrc_enter_lpm(ci, false);
266
267 /* Disable all interrupts bits */
268 hw_write(ci, OP_USBINTR, 0xffffffff, 0);
269
270 /* Clear all interrupts status bits*/
271 hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
272
273 ci->rev = ci_get_revision(ci);
274
275 dev_dbg(ci->dev,
276 "ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
277 ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
278
279 /* setup lock mode ? */
280
281 /* ENDPTSETUPSTAT is '0' by default */
282
283 /* HCSPARAMS.bf.ppc SHOULD BE zero for device */
284
285 return 0;
286}
287
288static void hw_phymode_configure(struct ci_hdrc *ci)
289{
290 u32 portsc, lpm, sts = 0;
291
292 switch (ci->platdata->phy_mode) {
293 case USBPHY_INTERFACE_MODE_UTMI:
294 portsc = PORTSC_PTS(PTS_UTMI);
295 lpm = DEVLC_PTS(PTS_UTMI);
296 break;
297 case USBPHY_INTERFACE_MODE_UTMIW:
298 portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
299 lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
300 break;
301 case USBPHY_INTERFACE_MODE_ULPI:
302 portsc = PORTSC_PTS(PTS_ULPI);
303 lpm = DEVLC_PTS(PTS_ULPI);
304 break;
305 case USBPHY_INTERFACE_MODE_SERIAL:
306 portsc = PORTSC_PTS(PTS_SERIAL);
307 lpm = DEVLC_PTS(PTS_SERIAL);
308 sts = 1;
309 break;
310 case USBPHY_INTERFACE_MODE_HSIC:
311 portsc = PORTSC_PTS(PTS_HSIC);
312 lpm = DEVLC_PTS(PTS_HSIC);
313 break;
314 default:
315 return;
316 }
317
318 if (ci->hw_bank.lpm) {
319 hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
320 if (sts)
321 hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
322 } else {
323 hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
324 if (sts)
325 hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
326 }
327}
328
329/**
330 * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
331 * interfaces
332 * @ci: the controller
333 *
334 * This function returns an error code if the phy failed to init
335 */
336static int _ci_usb_phy_init(struct ci_hdrc *ci)
337{
338 int ret;
339
340 if (ci->phy) {
341 ret = phy_init(ci->phy);
342 if (ret)
343 return ret;
344
345 ret = phy_power_on(ci->phy);
346 if (ret) {
347 phy_exit(ci->phy);
348 return ret;
349 }
350 } else {
351 ret = usb_phy_init(ci->usb_phy);
352 }
353
354 return ret;
355}
356
357/**
358 * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy
359 * interfaces
360 * @ci: the controller
361 */
362static void ci_usb_phy_exit(struct ci_hdrc *ci)
363{
364 if (ci->phy) {
365 phy_power_off(ci->phy);
366 phy_exit(ci->phy);
367 } else {
368 usb_phy_shutdown(ci->usb_phy);
369 }
370}
371
372/**
373 * ci_usb_phy_init: initialize phy according to different phy type
374 * @ci: the controller
375 *
376 * This function returns an error code if usb_phy_init has failed
377 */
378static int ci_usb_phy_init(struct ci_hdrc *ci)
379{
380 int ret;
381
382 switch (ci->platdata->phy_mode) {
383 case USBPHY_INTERFACE_MODE_UTMI:
384 case USBPHY_INTERFACE_MODE_UTMIW:
385 case USBPHY_INTERFACE_MODE_HSIC:
386 ret = _ci_usb_phy_init(ci);
387 if (!ret)
388 hw_wait_phy_stable();
389 else
390 return ret;
391 hw_phymode_configure(ci);
392 break;
393 case USBPHY_INTERFACE_MODE_ULPI:
394 case USBPHY_INTERFACE_MODE_SERIAL:
395 hw_phymode_configure(ci);
396 ret = _ci_usb_phy_init(ci);
397 if (ret)
398 return ret;
399 break;
400 default:
401 ret = _ci_usb_phy_init(ci);
402 if (!ret)
403 hw_wait_phy_stable();
404 }
405
406 return ret;
407}
408
409
410/**
411 * ci_platform_configure: do controller configure
412 * @ci: the controller
413 *
414 */
415void ci_platform_configure(struct ci_hdrc *ci)
416{
417 bool is_device_mode, is_host_mode;
418
419 is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
420 is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
421
422 if (is_device_mode &&
423 (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING))
424 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
425
426 if (is_host_mode &&
427 (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING))
428 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
429
430 if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
431 if (ci->hw_bank.lpm)
432 hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
433 else
434 hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
435 }
436
437 if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
438 hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
439
440 hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16);
441
442 if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST)
443 hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK,
444 ci->platdata->ahb_burst_config);
445
446 /* override burst size, take effect only when ahb_burst_config is 0 */
447 if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) {
448 if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST)
449 hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK,
450 ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK));
451
452 if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST)
453 hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
454 ci->platdata->rx_burst_size);
455 }
456}
457
458/**
459 * hw_controller_reset: do controller reset
460 * @ci: the controller
461 *
462 * This function returns an error code
463 */
464static int hw_controller_reset(struct ci_hdrc *ci)
465{
466 int count = 0;
467
468 hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
469 while (hw_read(ci, OP_USBCMD, USBCMD_RST)) {
470 udelay(10);
471 if (count++ > 1000)
472 return -ETIMEDOUT;
473 }
474
475 return 0;
476}
477
478/**
479 * hw_device_reset: resets chip (execute without interruption)
480 * @ci: the controller
481 *
482 * This function returns an error code
483 */
484int hw_device_reset(struct ci_hdrc *ci)
485{
486 int ret;
487
488 /* should flush & stop before reset */
489 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
490 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
491
492 ret = hw_controller_reset(ci);
493 if (ret) {
494 dev_err(ci->dev, "error resetting controller, ret=%d\n", ret);
495 return ret;
496 }
497
498 if (ci->platdata->notify_event)
499 ci->platdata->notify_event(ci,
500 CI_HDRC_CONTROLLER_RESET_EVENT);
501
502 /* USBMODE should be configured step by step */
503 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
504 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
505 /* HW >= 2.3 */
506 hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
507
508 if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
509 pr_err("cannot enter in %s device mode", ci_role(ci)->name);
510 pr_err("lpm = %i", ci->hw_bank.lpm);
511 return -ENODEV;
512 }
513
514 ci_platform_configure(ci);
515
516 return 0;
517}
518
519/**
520 * hw_wait_reg: wait the register value
521 *
522 * Sometimes, it needs to wait register value before going on.
523 * Eg, when switch to device mode, the vbus value should be lower
524 * than OTGSC_BSV before connects to host.
525 *
526 * @ci: the controller
527 * @reg: register index
528 * @mask: mast bit
529 * @value: the bit value to wait
530 * @timeout_ms: timeout in millisecond
531 *
532 * This function returns an error code if timeout
533 */
534int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
535 u32 value, unsigned int timeout_ms)
536{
537 unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms);
538
539 while (hw_read(ci, reg, mask) != value) {
540 if (time_after(jiffies, elapse)) {
541 dev_err(ci->dev, "timeout waiting for %08x in %d\n",
542 mask, reg);
543 return -ETIMEDOUT;
544 }
545 msleep(20);
546 }
547
548 return 0;
549}
550
551static irqreturn_t ci_irq(int irq, void *data)
552{
553 struct ci_hdrc *ci = data;
554 irqreturn_t ret = IRQ_NONE;
555 u32 otgsc = 0;
556
557 if (ci->in_lpm) {
558 disable_irq_nosync(irq);
559 ci->wakeup_int = true;
560 pm_runtime_get(ci->dev);
561 return IRQ_HANDLED;
562 }
563
564 if (ci->is_otg) {
565 otgsc = hw_read_otgsc(ci, ~0);
566 if (ci_otg_is_fsm_mode(ci)) {
567 ret = ci_otg_fsm_irq(ci);
568 if (ret == IRQ_HANDLED)
569 return ret;
570 }
571 }
572
573 /*
574 * Handle id change interrupt, it indicates device/host function
575 * switch.
576 */
577 if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
578 ci->id_event = true;
579 /* Clear ID change irq status */
580 hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
581 ci_otg_queue_work(ci);
582 return IRQ_HANDLED;
583 }
584
585 /*
586 * Handle vbus change interrupt, it indicates device connection
587 * and disconnection events.
588 */
589 if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
590 ci->b_sess_valid_event = true;
591 /* Clear BSV irq */
592 hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
593 ci_otg_queue_work(ci);
594 return IRQ_HANDLED;
595 }
596
597 /* Handle device/host interrupt */
598 if (ci->role != CI_ROLE_END)
599 ret = ci_role(ci)->irq(ci);
600
601 return ret;
602}
603
604static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event,
605 void *ptr)
606{
607 struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb);
608 struct ci_hdrc *ci = vbus->ci;
609
610 if (event)
611 vbus->state = true;
612 else
613 vbus->state = false;
614
615 vbus->changed = true;
616
617 ci_irq(ci->irq, ci);
618 return NOTIFY_DONE;
619}
620
621static int ci_id_notifier(struct notifier_block *nb, unsigned long event,
622 void *ptr)
623{
624 struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb);
625 struct ci_hdrc *ci = id->ci;
626
627 if (event)
628 id->state = false;
629 else
630 id->state = true;
631
632 id->changed = true;
633
634 ci_irq(ci->irq, ci);
635 return NOTIFY_DONE;
636}
637
638static int ci_get_platdata(struct device *dev,
639 struct ci_hdrc_platform_data *platdata)
640{
641 struct extcon_dev *ext_vbus, *ext_id;
642 struct ci_hdrc_cable *cable;
643 int ret;
644
645 if (!platdata->phy_mode)
646 platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
647
648 if (!platdata->dr_mode)
649 platdata->dr_mode = usb_get_dr_mode(dev);
650
651 if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
652 platdata->dr_mode = USB_DR_MODE_OTG;
653
654 if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
655 /* Get the vbus regulator */
656 platdata->reg_vbus = devm_regulator_get(dev, "vbus");
657 if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
658 return -EPROBE_DEFER;
659 } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
660 /* no vbus regulator is needed */
661 platdata->reg_vbus = NULL;
662 } else if (IS_ERR(platdata->reg_vbus)) {
663 dev_err(dev, "Getting regulator error: %ld\n",
664 PTR_ERR(platdata->reg_vbus));
665 return PTR_ERR(platdata->reg_vbus);
666 }
667 /* Get TPL support */
668 if (!platdata->tpl_support)
669 platdata->tpl_support =
670 of_usb_host_tpl_support(dev->of_node);
671 }
672
673 if (platdata->dr_mode == USB_DR_MODE_OTG) {
674 /* We can support HNP and SRP of OTG 2.0 */
675 platdata->ci_otg_caps.otg_rev = 0x0200;
676 platdata->ci_otg_caps.hnp_support = true;
677 platdata->ci_otg_caps.srp_support = true;
678
679 /* Update otg capabilities by DT properties */
680 ret = of_usb_update_otg_caps(dev->of_node,
681 &platdata->ci_otg_caps);
682 if (ret)
683 return ret;
684 }
685
686 if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
687 platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
688
689 of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
690 &platdata->phy_clkgate_delay_us);
691
692 platdata->itc_setting = 1;
693
694 of_property_read_u32(dev->of_node, "itc-setting",
695 &platdata->itc_setting);
696
697 ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
698 &platdata->ahb_burst_config);
699 if (!ret) {
700 platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
701 } else if (ret != -EINVAL) {
702 dev_err(dev, "failed to get ahb-burst-config\n");
703 return ret;
704 }
705
706 ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
707 &platdata->tx_burst_size);
708 if (!ret) {
709 platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
710 } else if (ret != -EINVAL) {
711 dev_err(dev, "failed to get tx-burst-size-dword\n");
712 return ret;
713 }
714
715 ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
716 &platdata->rx_burst_size);
717 if (!ret) {
718 platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
719 } else if (ret != -EINVAL) {
720 dev_err(dev, "failed to get rx-burst-size-dword\n");
721 return ret;
722 }
723
724 if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
725 platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
726
727 ext_id = ERR_PTR(-ENODEV);
728 ext_vbus = ERR_PTR(-ENODEV);
729 if (of_property_read_bool(dev->of_node, "extcon")) {
730 /* Each one of them is not mandatory */
731 ext_vbus = extcon_get_edev_by_phandle(dev, 0);
732 if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
733 return PTR_ERR(ext_vbus);
734
735 ext_id = extcon_get_edev_by_phandle(dev, 1);
736 if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
737 return PTR_ERR(ext_id);
738 }
739
740 cable = &platdata->vbus_extcon;
741 cable->nb.notifier_call = ci_vbus_notifier;
742 cable->edev = ext_vbus;
743
744 if (!IS_ERR(ext_vbus)) {
745 ret = extcon_get_cable_state_(cable->edev, EXTCON_USB);
746 if (ret)
747 cable->state = true;
748 else
749 cable->state = false;
750 }
751
752 cable = &platdata->id_extcon;
753 cable->nb.notifier_call = ci_id_notifier;
754 cable->edev = ext_id;
755
756 if (!IS_ERR(ext_id)) {
757 ret = extcon_get_cable_state_(cable->edev, EXTCON_USB_HOST);
758 if (ret)
759 cable->state = false;
760 else
761 cable->state = true;
762 }
763 return 0;
764}
765
766static int ci_extcon_register(struct ci_hdrc *ci)
767{
768 struct ci_hdrc_cable *id, *vbus;
769 int ret;
770
771 id = &ci->platdata->id_extcon;
772 id->ci = ci;
773 if (!IS_ERR(id->edev)) {
774 ret = extcon_register_notifier(id->edev, EXTCON_USB_HOST,
775 &id->nb);
776 if (ret < 0) {
777 dev_err(ci->dev, "register ID failed\n");
778 return ret;
779 }
780 }
781
782 vbus = &ci->platdata->vbus_extcon;
783 vbus->ci = ci;
784 if (!IS_ERR(vbus->edev)) {
785 ret = extcon_register_notifier(vbus->edev, EXTCON_USB,
786 &vbus->nb);
787 if (ret < 0) {
788 extcon_unregister_notifier(id->edev, EXTCON_USB_HOST,
789 &id->nb);
790 dev_err(ci->dev, "register VBUS failed\n");
791 return ret;
792 }
793 }
794
795 return 0;
796}
797
798static void ci_extcon_unregister(struct ci_hdrc *ci)
799{
800 struct ci_hdrc_cable *cable;
801
802 cable = &ci->platdata->id_extcon;
803 if (!IS_ERR(cable->edev))
804 extcon_unregister_notifier(cable->edev, EXTCON_USB_HOST,
805 &cable->nb);
806
807 cable = &ci->platdata->vbus_extcon;
808 if (!IS_ERR(cable->edev))
809 extcon_unregister_notifier(cable->edev, EXTCON_USB, &cable->nb);
810}
811
812static DEFINE_IDA(ci_ida);
813
814struct platform_device *ci_hdrc_add_device(struct device *dev,
815 struct resource *res, int nres,
816 struct ci_hdrc_platform_data *platdata)
817{
818 struct platform_device *pdev;
819 int id, ret;
820
821 ret = ci_get_platdata(dev, platdata);
822 if (ret)
823 return ERR_PTR(ret);
824
825 id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
826 if (id < 0)
827 return ERR_PTR(id);
828
829 pdev = platform_device_alloc("ci_hdrc", id);
830 if (!pdev) {
831 ret = -ENOMEM;
832 goto put_id;
833 }
834
835 pdev->dev.parent = dev;
836 pdev->dev.dma_mask = dev->dma_mask;
837 pdev->dev.dma_parms = dev->dma_parms;
838 dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
839
840 ret = platform_device_add_resources(pdev, res, nres);
841 if (ret)
842 goto err;
843
844 ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
845 if (ret)
846 goto err;
847
848 ret = platform_device_add(pdev);
849 if (ret)
850 goto err;
851
852 return pdev;
853
854err:
855 platform_device_put(pdev);
856put_id:
857 ida_simple_remove(&ci_ida, id);
858 return ERR_PTR(ret);
859}
860EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
861
862void ci_hdrc_remove_device(struct platform_device *pdev)
863{
864 int id = pdev->id;
865 platform_device_unregister(pdev);
866 ida_simple_remove(&ci_ida, id);
867}
868EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
869
870static inline void ci_role_destroy(struct ci_hdrc *ci)
871{
872 ci_hdrc_gadget_destroy(ci);
873 ci_hdrc_host_destroy(ci);
874 if (ci->is_otg)
875 ci_hdrc_otg_destroy(ci);
876}
877
878static void ci_get_otg_capable(struct ci_hdrc *ci)
879{
880 if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
881 ci->is_otg = false;
882 else
883 ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
884 DCCPARAMS_DC | DCCPARAMS_HC)
885 == (DCCPARAMS_DC | DCCPARAMS_HC));
886 if (ci->is_otg) {
887 dev_dbg(ci->dev, "It is OTG capable controller\n");
888 /* Disable and clear all OTG irq */
889 hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
890 OTGSC_INT_STATUS_BITS);
891 }
892}
893
894static int ci_hdrc_probe(struct platform_device *pdev)
895{
896 struct device *dev = &pdev->dev;
897 struct ci_hdrc *ci;
898 struct resource *res;
899 void __iomem *base;
900 int ret;
901 enum usb_dr_mode dr_mode;
902
903 if (!dev_get_platdata(dev)) {
904 dev_err(dev, "platform data missing\n");
905 return -ENODEV;
906 }
907
908 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
909 base = devm_ioremap_resource(dev, res);
910 if (IS_ERR(base))
911 return PTR_ERR(base);
912
913 ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
914 if (!ci)
915 return -ENOMEM;
916
917 ci->dev = dev;
918 ci->platdata = dev_get_platdata(dev);
919 ci->imx28_write_fix = !!(ci->platdata->flags &
920 CI_HDRC_IMX28_WRITE_FIX);
921 ci->supports_runtime_pm = !!(ci->platdata->flags &
922 CI_HDRC_SUPPORTS_RUNTIME_PM);
923
924 ret = hw_device_init(ci, base);
925 if (ret < 0) {
926 dev_err(dev, "can't initialize hardware\n");
927 return -ENODEV;
928 }
929
930 if (ci->platdata->phy) {
931 ci->phy = ci->platdata->phy;
932 } else if (ci->platdata->usb_phy) {
933 ci->usb_phy = ci->platdata->usb_phy;
934 } else {
935 ci->phy = devm_phy_get(dev->parent, "usb-phy");
936 ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2);
937
938 /* if both generic PHY and USB PHY layers aren't enabled */
939 if (PTR_ERR(ci->phy) == -ENOSYS &&
940 PTR_ERR(ci->usb_phy) == -ENXIO)
941 return -ENXIO;
942
943 if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy))
944 return -EPROBE_DEFER;
945
946 if (IS_ERR(ci->phy))
947 ci->phy = NULL;
948 else if (IS_ERR(ci->usb_phy))
949 ci->usb_phy = NULL;
950 }
951
952 ret = ci_usb_phy_init(ci);
953 if (ret) {
954 dev_err(dev, "unable to init phy: %d\n", ret);
955 return ret;
956 }
957
958 ci->hw_bank.phys = res->start;
959
960 ci->irq = platform_get_irq(pdev, 0);
961 if (ci->irq < 0) {
962 dev_err(dev, "missing IRQ\n");
963 ret = ci->irq;
964 goto deinit_phy;
965 }
966
967 ci_get_otg_capable(ci);
968
969 dr_mode = ci->platdata->dr_mode;
970 /* initialize role(s) before the interrupt is requested */
971 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
972 ret = ci_hdrc_host_init(ci);
973 if (ret)
974 dev_info(dev, "doesn't support host\n");
975 }
976
977 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
978 ret = ci_hdrc_gadget_init(ci);
979 if (ret)
980 dev_info(dev, "doesn't support gadget\n");
981 }
982
983 if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
984 dev_err(dev, "no supported roles\n");
985 ret = -ENODEV;
986 goto deinit_phy;
987 }
988
989 if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
990 ret = ci_hdrc_otg_init(ci);
991 if (ret) {
992 dev_err(dev, "init otg fails, ret = %d\n", ret);
993 goto stop;
994 }
995 }
996
997 if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
998 if (ci->is_otg) {
999 ci->role = ci_otg_role(ci);
1000 /* Enable ID change irq */
1001 hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
1002 } else {
1003 /*
1004 * If the controller is not OTG capable, but support
1005 * role switch, the defalt role is gadget, and the
1006 * user can switch it through debugfs.
1007 */
1008 ci->role = CI_ROLE_GADGET;
1009 }
1010 } else {
1011 ci->role = ci->roles[CI_ROLE_HOST]
1012 ? CI_ROLE_HOST
1013 : CI_ROLE_GADGET;
1014 }
1015
1016 if (!ci_otg_is_fsm_mode(ci)) {
1017 /* only update vbus status for peripheral */
1018 if (ci->role == CI_ROLE_GADGET)
1019 ci_handle_vbus_change(ci);
1020
1021 ret = ci_role_start(ci, ci->role);
1022 if (ret) {
1023 dev_err(dev, "can't start %s role\n",
1024 ci_role(ci)->name);
1025 goto stop;
1026 }
1027 }
1028
1029 platform_set_drvdata(pdev, ci);
1030 ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
1031 ci->platdata->name, ci);
1032 if (ret)
1033 goto stop;
1034
1035 ret = ci_extcon_register(ci);
1036 if (ret)
1037 goto stop;
1038
1039 if (ci->supports_runtime_pm) {
1040 pm_runtime_set_active(&pdev->dev);
1041 pm_runtime_enable(&pdev->dev);
1042 pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
1043 pm_runtime_mark_last_busy(ci->dev);
1044 pm_runtime_use_autosuspend(&pdev->dev);
1045 }
1046
1047 if (ci_otg_is_fsm_mode(ci))
1048 ci_hdrc_otg_fsm_start(ci);
1049
1050 device_set_wakeup_capable(&pdev->dev, true);
1051
1052 ret = dbg_create_files(ci);
1053 if (!ret)
1054 return 0;
1055
1056 ci_extcon_unregister(ci);
1057stop:
1058 ci_role_destroy(ci);
1059deinit_phy:
1060 ci_usb_phy_exit(ci);
1061
1062 return ret;
1063}
1064
1065static int ci_hdrc_remove(struct platform_device *pdev)
1066{
1067 struct ci_hdrc *ci = platform_get_drvdata(pdev);
1068
1069 if (ci->supports_runtime_pm) {
1070 pm_runtime_get_sync(&pdev->dev);
1071 pm_runtime_disable(&pdev->dev);
1072 pm_runtime_put_noidle(&pdev->dev);
1073 }
1074
1075 dbg_remove_files(ci);
1076 ci_extcon_unregister(ci);
1077 ci_role_destroy(ci);
1078 ci_hdrc_enter_lpm(ci, true);
1079 ci_usb_phy_exit(ci);
1080
1081 return 0;
1082}
1083
1084#ifdef CONFIG_PM
1085/* Prepare wakeup by SRP before suspend */
1086static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
1087{
1088 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1089 !hw_read_otgsc(ci, OTGSC_ID)) {
1090 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
1091 PORTSC_PP);
1092 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
1093 PORTSC_WKCN);
1094 }
1095}
1096
1097/* Handle SRP when wakeup by data pulse */
1098static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
1099{
1100 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1101 (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
1102 if (!hw_read_otgsc(ci, OTGSC_ID)) {
1103 ci->fsm.a_srp_det = 1;
1104 ci->fsm.a_bus_drop = 0;
1105 } else {
1106 ci->fsm.id = 1;
1107 }
1108 ci_otg_queue_work(ci);
1109 }
1110}
1111
1112static void ci_controller_suspend(struct ci_hdrc *ci)
1113{
1114 disable_irq(ci->irq);
1115 ci_hdrc_enter_lpm(ci, true);
1116 if (ci->platdata->phy_clkgate_delay_us)
1117 usleep_range(ci->platdata->phy_clkgate_delay_us,
1118 ci->platdata->phy_clkgate_delay_us + 50);
1119 usb_phy_set_suspend(ci->usb_phy, 1);
1120 ci->in_lpm = true;
1121 enable_irq(ci->irq);
1122}
1123
1124static int ci_controller_resume(struct device *dev)
1125{
1126 struct ci_hdrc *ci = dev_get_drvdata(dev);
1127
1128 dev_dbg(dev, "at %s\n", __func__);
1129
1130 if (!ci->in_lpm) {
1131 WARN_ON(1);
1132 return 0;
1133 }
1134
1135 ci_hdrc_enter_lpm(ci, false);
1136 if (ci->usb_phy) {
1137 usb_phy_set_suspend(ci->usb_phy, 0);
1138 usb_phy_set_wakeup(ci->usb_phy, false);
1139 hw_wait_phy_stable();
1140 }
1141
1142 ci->in_lpm = false;
1143 if (ci->wakeup_int) {
1144 ci->wakeup_int = false;
1145 pm_runtime_mark_last_busy(ci->dev);
1146 pm_runtime_put_autosuspend(ci->dev);
1147 enable_irq(ci->irq);
1148 if (ci_otg_is_fsm_mode(ci))
1149 ci_otg_fsm_wakeup_by_srp(ci);
1150 }
1151
1152 return 0;
1153}
1154
1155#ifdef CONFIG_PM_SLEEP
1156static int ci_suspend(struct device *dev)
1157{
1158 struct ci_hdrc *ci = dev_get_drvdata(dev);
1159
1160 if (ci->wq)
1161 flush_workqueue(ci->wq);
1162 /*
1163 * Controller needs to be active during suspend, otherwise the core
1164 * may run resume when the parent is at suspend if other driver's
1165 * suspend fails, it occurs before parent's suspend has not started,
1166 * but the core suspend has finished.
1167 */
1168 if (ci->in_lpm)
1169 pm_runtime_resume(dev);
1170
1171 if (ci->in_lpm) {
1172 WARN_ON(1);
1173 return 0;
1174 }
1175
1176 if (device_may_wakeup(dev)) {
1177 if (ci_otg_is_fsm_mode(ci))
1178 ci_otg_fsm_suspend_for_srp(ci);
1179
1180 usb_phy_set_wakeup(ci->usb_phy, true);
1181 enable_irq_wake(ci->irq);
1182 }
1183
1184 ci_controller_suspend(ci);
1185
1186 return 0;
1187}
1188
1189static int ci_resume(struct device *dev)
1190{
1191 struct ci_hdrc *ci = dev_get_drvdata(dev);
1192 int ret;
1193
1194 if (device_may_wakeup(dev))
1195 disable_irq_wake(ci->irq);
1196
1197 ret = ci_controller_resume(dev);
1198 if (ret)
1199 return ret;
1200
1201 if (ci->supports_runtime_pm) {
1202 pm_runtime_disable(dev);
1203 pm_runtime_set_active(dev);
1204 pm_runtime_enable(dev);
1205 }
1206
1207 return ret;
1208}
1209#endif /* CONFIG_PM_SLEEP */
1210
1211static int ci_runtime_suspend(struct device *dev)
1212{
1213 struct ci_hdrc *ci = dev_get_drvdata(dev);
1214
1215 dev_dbg(dev, "at %s\n", __func__);
1216
1217 if (ci->in_lpm) {
1218 WARN_ON(1);
1219 return 0;
1220 }
1221
1222 if (ci_otg_is_fsm_mode(ci))
1223 ci_otg_fsm_suspend_for_srp(ci);
1224
1225 usb_phy_set_wakeup(ci->usb_phy, true);
1226 ci_controller_suspend(ci);
1227
1228 return 0;
1229}
1230
1231static int ci_runtime_resume(struct device *dev)
1232{
1233 return ci_controller_resume(dev);
1234}
1235
1236#endif /* CONFIG_PM */
1237static const struct dev_pm_ops ci_pm_ops = {
1238 SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
1239 SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
1240};
1241
1242static struct platform_driver ci_hdrc_driver = {
1243 .probe = ci_hdrc_probe,
1244 .remove = ci_hdrc_remove,
1245 .driver = {
1246 .name = "ci_hdrc",
1247 .pm = &ci_pm_ops,
1248 },
1249};
1250
1251static int __init ci_hdrc_platform_register(void)
1252{
1253 ci_hdrc_host_driver_init();
1254 return platform_driver_register(&ci_hdrc_driver);
1255}
1256module_init(ci_hdrc_platform_register);
1257
1258static void __exit ci_hdrc_platform_unregister(void)
1259{
1260 platform_driver_unregister(&ci_hdrc_driver);
1261}
1262module_exit(ci_hdrc_platform_unregister);
1263
1264MODULE_ALIAS("platform:ci_hdrc");
1265MODULE_LICENSE("GPL v2");
1266MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
1267MODULE_DESCRIPTION("ChipIdea HDRC Driver");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * core.c - ChipIdea USB IP core family device controller
4 *
5 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
6 *
7 * Author: David Lopo
8 */
9
10/*
11 * Description: ChipIdea USB IP core family device controller
12 *
13 * This driver is composed of several blocks:
14 * - HW: hardware interface
15 * - DBG: debug facilities (optional)
16 * - UTIL: utilities
17 * - ISR: interrupts handling
18 * - ENDPT: endpoint operations (Gadget API)
19 * - GADGET: gadget operations (Gadget API)
20 * - BUS: bus glue code, bus abstraction layer
21 *
22 * Compile Options
23 * - STALL_IN: non-empty bulk-in pipes cannot be halted
24 * if defined mass storage compliance succeeds but with warnings
25 * => case 4: Hi > Dn
26 * => case 5: Hi > Di
27 * => case 8: Hi <> Do
28 * if undefined usbtest 13 fails
29 * - TRACE: enable function tracing (depends on DEBUG)
30 *
31 * Main Features
32 * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
33 * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
34 * - Normal & LPM support
35 *
36 * USBTEST Report
37 * - OK: 0-12, 13 (STALL_IN defined) & 14
38 * - Not Supported: 15 & 16 (ISO)
39 *
40 * TODO List
41 * - Suspend & Remote Wakeup
42 */
43#include <linux/delay.h>
44#include <linux/device.h>
45#include <linux/dma-mapping.h>
46#include <linux/extcon.h>
47#include <linux/phy/phy.h>
48#include <linux/platform_device.h>
49#include <linux/module.h>
50#include <linux/idr.h>
51#include <linux/interrupt.h>
52#include <linux/io.h>
53#include <linux/kernel.h>
54#include <linux/slab.h>
55#include <linux/pm_runtime.h>
56#include <linux/usb/ch9.h>
57#include <linux/usb/gadget.h>
58#include <linux/usb/otg.h>
59#include <linux/usb/chipidea.h>
60#include <linux/usb/of.h>
61#include <linux/of.h>
62#include <linux/regulator/consumer.h>
63#include <linux/usb/ehci_def.h>
64
65#include "ci.h"
66#include "udc.h"
67#include "bits.h"
68#include "host.h"
69#include "otg.h"
70#include "otg_fsm.h"
71
72/* Controller register map */
73static const u8 ci_regs_nolpm[] = {
74 [CAP_CAPLENGTH] = 0x00U,
75 [CAP_HCCPARAMS] = 0x08U,
76 [CAP_DCCPARAMS] = 0x24U,
77 [CAP_TESTMODE] = 0x38U,
78 [OP_USBCMD] = 0x00U,
79 [OP_USBSTS] = 0x04U,
80 [OP_USBINTR] = 0x08U,
81 [OP_DEVICEADDR] = 0x14U,
82 [OP_ENDPTLISTADDR] = 0x18U,
83 [OP_TTCTRL] = 0x1CU,
84 [OP_BURSTSIZE] = 0x20U,
85 [OP_ULPI_VIEWPORT] = 0x30U,
86 [OP_PORTSC] = 0x44U,
87 [OP_DEVLC] = 0x84U,
88 [OP_OTGSC] = 0x64U,
89 [OP_USBMODE] = 0x68U,
90 [OP_ENDPTSETUPSTAT] = 0x6CU,
91 [OP_ENDPTPRIME] = 0x70U,
92 [OP_ENDPTFLUSH] = 0x74U,
93 [OP_ENDPTSTAT] = 0x78U,
94 [OP_ENDPTCOMPLETE] = 0x7CU,
95 [OP_ENDPTCTRL] = 0x80U,
96};
97
98static const u8 ci_regs_lpm[] = {
99 [CAP_CAPLENGTH] = 0x00U,
100 [CAP_HCCPARAMS] = 0x08U,
101 [CAP_DCCPARAMS] = 0x24U,
102 [CAP_TESTMODE] = 0xFCU,
103 [OP_USBCMD] = 0x00U,
104 [OP_USBSTS] = 0x04U,
105 [OP_USBINTR] = 0x08U,
106 [OP_DEVICEADDR] = 0x14U,
107 [OP_ENDPTLISTADDR] = 0x18U,
108 [OP_TTCTRL] = 0x1CU,
109 [OP_BURSTSIZE] = 0x20U,
110 [OP_ULPI_VIEWPORT] = 0x30U,
111 [OP_PORTSC] = 0x44U,
112 [OP_DEVLC] = 0x84U,
113 [OP_OTGSC] = 0xC4U,
114 [OP_USBMODE] = 0xC8U,
115 [OP_ENDPTSETUPSTAT] = 0xD8U,
116 [OP_ENDPTPRIME] = 0xDCU,
117 [OP_ENDPTFLUSH] = 0xE0U,
118 [OP_ENDPTSTAT] = 0xE4U,
119 [OP_ENDPTCOMPLETE] = 0xE8U,
120 [OP_ENDPTCTRL] = 0xECU,
121};
122
123static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
124{
125 int i;
126
127 for (i = 0; i < OP_ENDPTCTRL; i++)
128 ci->hw_bank.regmap[i] =
129 (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
130 (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
131
132 for (; i <= OP_LAST; i++)
133 ci->hw_bank.regmap[i] = ci->hw_bank.op +
134 4 * (i - OP_ENDPTCTRL) +
135 (is_lpm
136 ? ci_regs_lpm[OP_ENDPTCTRL]
137 : ci_regs_nolpm[OP_ENDPTCTRL]);
138
139}
140
141static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
142{
143 int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
144 enum ci_revision rev = CI_REVISION_UNKNOWN;
145
146 if (ver == 0x2) {
147 rev = hw_read_id_reg(ci, ID_ID, REVISION)
148 >> __ffs(REVISION);
149 rev += CI_REVISION_20;
150 } else if (ver == 0x0) {
151 rev = CI_REVISION_1X;
152 }
153
154 return rev;
155}
156
157/**
158 * hw_read_intr_enable: returns interrupt enable register
159 *
160 * @ci: the controller
161 *
162 * This function returns register data
163 */
164u32 hw_read_intr_enable(struct ci_hdrc *ci)
165{
166 return hw_read(ci, OP_USBINTR, ~0);
167}
168
169/**
170 * hw_read_intr_status: returns interrupt status register
171 *
172 * @ci: the controller
173 *
174 * This function returns register data
175 */
176u32 hw_read_intr_status(struct ci_hdrc *ci)
177{
178 return hw_read(ci, OP_USBSTS, ~0);
179}
180
181/**
182 * hw_port_test_set: writes port test mode (execute without interruption)
183 * @mode: new value
184 *
185 * This function returns an error code
186 */
187int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
188{
189 const u8 TEST_MODE_MAX = 7;
190
191 if (mode > TEST_MODE_MAX)
192 return -EINVAL;
193
194 hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
195 return 0;
196}
197
198/**
199 * hw_port_test_get: reads port test mode value
200 *
201 * @ci: the controller
202 *
203 * This function returns port test mode value
204 */
205u8 hw_port_test_get(struct ci_hdrc *ci)
206{
207 return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
208}
209
210static void hw_wait_phy_stable(void)
211{
212 /*
213 * The phy needs some delay to output the stable status from low
214 * power mode. And for OTGSC, the status inputs are debounced
215 * using a 1 ms time constant, so, delay 2ms for controller to get
216 * the stable status, like vbus and id when the phy leaves low power.
217 */
218 usleep_range(2000, 2500);
219}
220
221/* The PHY enters/leaves low power mode */
222static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
223{
224 enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
225 bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
226
227 if (enable && !lpm)
228 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
229 PORTSC_PHCD(ci->hw_bank.lpm));
230 else if (!enable && lpm)
231 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
232 0);
233}
234
235static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
236{
237 u32 reg;
238
239 /* bank is a module variable */
240 ci->hw_bank.abs = base;
241
242 ci->hw_bank.cap = ci->hw_bank.abs;
243 ci->hw_bank.cap += ci->platdata->capoffset;
244 ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
245
246 hw_alloc_regmap(ci, false);
247 reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
248 __ffs(HCCPARAMS_LEN);
249 ci->hw_bank.lpm = reg;
250 if (reg)
251 hw_alloc_regmap(ci, !!reg);
252 ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
253 ci->hw_bank.size += OP_LAST;
254 ci->hw_bank.size /= sizeof(u32);
255
256 reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
257 __ffs(DCCPARAMS_DEN);
258 ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */
259
260 if (ci->hw_ep_max > ENDPT_MAX)
261 return -ENODEV;
262
263 ci_hdrc_enter_lpm(ci, false);
264
265 /* Disable all interrupts bits */
266 hw_write(ci, OP_USBINTR, 0xffffffff, 0);
267
268 /* Clear all interrupts status bits*/
269 hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
270
271 ci->rev = ci_get_revision(ci);
272
273 dev_dbg(ci->dev,
274 "ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
275 ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
276
277 /* setup lock mode ? */
278
279 /* ENDPTSETUPSTAT is '0' by default */
280
281 /* HCSPARAMS.bf.ppc SHOULD BE zero for device */
282
283 return 0;
284}
285
286void hw_phymode_configure(struct ci_hdrc *ci)
287{
288 u32 portsc, lpm, sts = 0;
289
290 switch (ci->platdata->phy_mode) {
291 case USBPHY_INTERFACE_MODE_UTMI:
292 portsc = PORTSC_PTS(PTS_UTMI);
293 lpm = DEVLC_PTS(PTS_UTMI);
294 break;
295 case USBPHY_INTERFACE_MODE_UTMIW:
296 portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
297 lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
298 break;
299 case USBPHY_INTERFACE_MODE_ULPI:
300 portsc = PORTSC_PTS(PTS_ULPI);
301 lpm = DEVLC_PTS(PTS_ULPI);
302 break;
303 case USBPHY_INTERFACE_MODE_SERIAL:
304 portsc = PORTSC_PTS(PTS_SERIAL);
305 lpm = DEVLC_PTS(PTS_SERIAL);
306 sts = 1;
307 break;
308 case USBPHY_INTERFACE_MODE_HSIC:
309 portsc = PORTSC_PTS(PTS_HSIC);
310 lpm = DEVLC_PTS(PTS_HSIC);
311 break;
312 default:
313 return;
314 }
315
316 if (ci->hw_bank.lpm) {
317 hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
318 if (sts)
319 hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
320 } else {
321 hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
322 if (sts)
323 hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
324 }
325}
326EXPORT_SYMBOL_GPL(hw_phymode_configure);
327
328/**
329 * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
330 * interfaces
331 * @ci: the controller
332 *
333 * This function returns an error code if the phy failed to init
334 */
335static int _ci_usb_phy_init(struct ci_hdrc *ci)
336{
337 int ret;
338
339 if (ci->phy) {
340 ret = phy_init(ci->phy);
341 if (ret)
342 return ret;
343
344 ret = phy_power_on(ci->phy);
345 if (ret) {
346 phy_exit(ci->phy);
347 return ret;
348 }
349 } else {
350 ret = usb_phy_init(ci->usb_phy);
351 }
352
353 return ret;
354}
355
356/**
357 * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy
358 * interfaces
359 * @ci: the controller
360 */
361static void ci_usb_phy_exit(struct ci_hdrc *ci)
362{
363 if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
364 return;
365
366 if (ci->phy) {
367 phy_power_off(ci->phy);
368 phy_exit(ci->phy);
369 } else {
370 usb_phy_shutdown(ci->usb_phy);
371 }
372}
373
374/**
375 * ci_usb_phy_init: initialize phy according to different phy type
376 * @ci: the controller
377 *
378 * This function returns an error code if usb_phy_init has failed
379 */
380static int ci_usb_phy_init(struct ci_hdrc *ci)
381{
382 int ret;
383
384 if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
385 return 0;
386
387 switch (ci->platdata->phy_mode) {
388 case USBPHY_INTERFACE_MODE_UTMI:
389 case USBPHY_INTERFACE_MODE_UTMIW:
390 case USBPHY_INTERFACE_MODE_HSIC:
391 ret = _ci_usb_phy_init(ci);
392 if (!ret)
393 hw_wait_phy_stable();
394 else
395 return ret;
396 hw_phymode_configure(ci);
397 break;
398 case USBPHY_INTERFACE_MODE_ULPI:
399 case USBPHY_INTERFACE_MODE_SERIAL:
400 hw_phymode_configure(ci);
401 ret = _ci_usb_phy_init(ci);
402 if (ret)
403 return ret;
404 break;
405 default:
406 ret = _ci_usb_phy_init(ci);
407 if (!ret)
408 hw_wait_phy_stable();
409 }
410
411 return ret;
412}
413
414
415/**
416 * ci_platform_configure: do controller configure
417 * @ci: the controller
418 *
419 */
420void ci_platform_configure(struct ci_hdrc *ci)
421{
422 bool is_device_mode, is_host_mode;
423
424 is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
425 is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
426
427 if (is_device_mode) {
428 phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE);
429
430 if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)
431 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
432 USBMODE_CI_SDIS);
433 }
434
435 if (is_host_mode) {
436 phy_set_mode(ci->phy, PHY_MODE_USB_HOST);
437
438 if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)
439 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
440 USBMODE_CI_SDIS);
441 }
442
443 if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
444 if (ci->hw_bank.lpm)
445 hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
446 else
447 hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
448 }
449
450 if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
451 hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
452
453 hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16);
454
455 if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST)
456 hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK,
457 ci->platdata->ahb_burst_config);
458
459 /* override burst size, take effect only when ahb_burst_config is 0 */
460 if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) {
461 if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST)
462 hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK,
463 ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK));
464
465 if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST)
466 hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
467 ci->platdata->rx_burst_size);
468 }
469}
470
471/**
472 * hw_controller_reset: do controller reset
473 * @ci: the controller
474 *
475 * This function returns an error code
476 */
477static int hw_controller_reset(struct ci_hdrc *ci)
478{
479 int count = 0;
480
481 hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
482 while (hw_read(ci, OP_USBCMD, USBCMD_RST)) {
483 udelay(10);
484 if (count++ > 1000)
485 return -ETIMEDOUT;
486 }
487
488 return 0;
489}
490
491/**
492 * hw_device_reset: resets chip (execute without interruption)
493 * @ci: the controller
494 *
495 * This function returns an error code
496 */
497int hw_device_reset(struct ci_hdrc *ci)
498{
499 int ret;
500
501 /* should flush & stop before reset */
502 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
503 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
504
505 ret = hw_controller_reset(ci);
506 if (ret) {
507 dev_err(ci->dev, "error resetting controller, ret=%d\n", ret);
508 return ret;
509 }
510
511 if (ci->platdata->notify_event) {
512 ret = ci->platdata->notify_event(ci,
513 CI_HDRC_CONTROLLER_RESET_EVENT);
514 if (ret)
515 return ret;
516 }
517
518 /* USBMODE should be configured step by step */
519 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
520 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
521 /* HW >= 2.3 */
522 hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
523
524 if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
525 pr_err("cannot enter in %s device mode", ci_role(ci)->name);
526 pr_err("lpm = %i", ci->hw_bank.lpm);
527 return -ENODEV;
528 }
529
530 ci_platform_configure(ci);
531
532 return 0;
533}
534
535static irqreturn_t ci_irq(int irq, void *data)
536{
537 struct ci_hdrc *ci = data;
538 irqreturn_t ret = IRQ_NONE;
539 u32 otgsc = 0;
540
541 if (ci->in_lpm) {
542 disable_irq_nosync(irq);
543 ci->wakeup_int = true;
544 pm_runtime_get(ci->dev);
545 return IRQ_HANDLED;
546 }
547
548 if (ci->is_otg) {
549 otgsc = hw_read_otgsc(ci, ~0);
550 if (ci_otg_is_fsm_mode(ci)) {
551 ret = ci_otg_fsm_irq(ci);
552 if (ret == IRQ_HANDLED)
553 return ret;
554 }
555 }
556
557 /*
558 * Handle id change interrupt, it indicates device/host function
559 * switch.
560 */
561 if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
562 ci->id_event = true;
563 /* Clear ID change irq status */
564 hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
565 ci_otg_queue_work(ci);
566 return IRQ_HANDLED;
567 }
568
569 /*
570 * Handle vbus change interrupt, it indicates device connection
571 * and disconnection events.
572 */
573 if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
574 ci->b_sess_valid_event = true;
575 /* Clear BSV irq */
576 hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
577 ci_otg_queue_work(ci);
578 return IRQ_HANDLED;
579 }
580
581 /* Handle device/host interrupt */
582 if (ci->role != CI_ROLE_END)
583 ret = ci_role(ci)->irq(ci);
584
585 return ret;
586}
587
588static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
589 void *ptr)
590{
591 struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb);
592 struct ci_hdrc *ci = cbl->ci;
593
594 cbl->connected = event;
595 cbl->changed = true;
596
597 ci_irq(ci->irq, ci);
598 return NOTIFY_DONE;
599}
600
601static int ci_get_platdata(struct device *dev,
602 struct ci_hdrc_platform_data *platdata)
603{
604 struct extcon_dev *ext_vbus, *ext_id;
605 struct ci_hdrc_cable *cable;
606 int ret;
607
608 if (!platdata->phy_mode)
609 platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
610
611 if (!platdata->dr_mode)
612 platdata->dr_mode = usb_get_dr_mode(dev);
613
614 if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
615 platdata->dr_mode = USB_DR_MODE_OTG;
616
617 if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
618 /* Get the vbus regulator */
619 platdata->reg_vbus = devm_regulator_get(dev, "vbus");
620 if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
621 return -EPROBE_DEFER;
622 } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
623 /* no vbus regulator is needed */
624 platdata->reg_vbus = NULL;
625 } else if (IS_ERR(platdata->reg_vbus)) {
626 dev_err(dev, "Getting regulator error: %ld\n",
627 PTR_ERR(platdata->reg_vbus));
628 return PTR_ERR(platdata->reg_vbus);
629 }
630 /* Get TPL support */
631 if (!platdata->tpl_support)
632 platdata->tpl_support =
633 of_usb_host_tpl_support(dev->of_node);
634 }
635
636 if (platdata->dr_mode == USB_DR_MODE_OTG) {
637 /* We can support HNP and SRP of OTG 2.0 */
638 platdata->ci_otg_caps.otg_rev = 0x0200;
639 platdata->ci_otg_caps.hnp_support = true;
640 platdata->ci_otg_caps.srp_support = true;
641
642 /* Update otg capabilities by DT properties */
643 ret = of_usb_update_otg_caps(dev->of_node,
644 &platdata->ci_otg_caps);
645 if (ret)
646 return ret;
647 }
648
649 if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
650 platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
651
652 of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
653 &platdata->phy_clkgate_delay_us);
654
655 platdata->itc_setting = 1;
656
657 of_property_read_u32(dev->of_node, "itc-setting",
658 &platdata->itc_setting);
659
660 ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
661 &platdata->ahb_burst_config);
662 if (!ret) {
663 platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
664 } else if (ret != -EINVAL) {
665 dev_err(dev, "failed to get ahb-burst-config\n");
666 return ret;
667 }
668
669 ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
670 &platdata->tx_burst_size);
671 if (!ret) {
672 platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
673 } else if (ret != -EINVAL) {
674 dev_err(dev, "failed to get tx-burst-size-dword\n");
675 return ret;
676 }
677
678 ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
679 &platdata->rx_burst_size);
680 if (!ret) {
681 platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
682 } else if (ret != -EINVAL) {
683 dev_err(dev, "failed to get rx-burst-size-dword\n");
684 return ret;
685 }
686
687 if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
688 platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
689
690 ext_id = ERR_PTR(-ENODEV);
691 ext_vbus = ERR_PTR(-ENODEV);
692 if (of_property_read_bool(dev->of_node, "extcon")) {
693 /* Each one of them is not mandatory */
694 ext_vbus = extcon_get_edev_by_phandle(dev, 0);
695 if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
696 return PTR_ERR(ext_vbus);
697
698 ext_id = extcon_get_edev_by_phandle(dev, 1);
699 if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
700 return PTR_ERR(ext_id);
701 }
702
703 cable = &platdata->vbus_extcon;
704 cable->nb.notifier_call = ci_cable_notifier;
705 cable->edev = ext_vbus;
706
707 if (!IS_ERR(ext_vbus)) {
708 ret = extcon_get_state(cable->edev, EXTCON_USB);
709 if (ret)
710 cable->connected = true;
711 else
712 cable->connected = false;
713 }
714
715 cable = &platdata->id_extcon;
716 cable->nb.notifier_call = ci_cable_notifier;
717 cable->edev = ext_id;
718
719 if (!IS_ERR(ext_id)) {
720 ret = extcon_get_state(cable->edev, EXTCON_USB_HOST);
721 if (ret)
722 cable->connected = true;
723 else
724 cable->connected = false;
725 }
726 return 0;
727}
728
729static int ci_extcon_register(struct ci_hdrc *ci)
730{
731 struct ci_hdrc_cable *id, *vbus;
732 int ret;
733
734 id = &ci->platdata->id_extcon;
735 id->ci = ci;
736 if (!IS_ERR_OR_NULL(id->edev)) {
737 ret = devm_extcon_register_notifier(ci->dev, id->edev,
738 EXTCON_USB_HOST, &id->nb);
739 if (ret < 0) {
740 dev_err(ci->dev, "register ID failed\n");
741 return ret;
742 }
743 }
744
745 vbus = &ci->platdata->vbus_extcon;
746 vbus->ci = ci;
747 if (!IS_ERR_OR_NULL(vbus->edev)) {
748 ret = devm_extcon_register_notifier(ci->dev, vbus->edev,
749 EXTCON_USB, &vbus->nb);
750 if (ret < 0) {
751 dev_err(ci->dev, "register VBUS failed\n");
752 return ret;
753 }
754 }
755
756 return 0;
757}
758
759static DEFINE_IDA(ci_ida);
760
761struct platform_device *ci_hdrc_add_device(struct device *dev,
762 struct resource *res, int nres,
763 struct ci_hdrc_platform_data *platdata)
764{
765 struct platform_device *pdev;
766 int id, ret;
767
768 ret = ci_get_platdata(dev, platdata);
769 if (ret)
770 return ERR_PTR(ret);
771
772 id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
773 if (id < 0)
774 return ERR_PTR(id);
775
776 pdev = platform_device_alloc("ci_hdrc", id);
777 if (!pdev) {
778 ret = -ENOMEM;
779 goto put_id;
780 }
781
782 pdev->dev.parent = dev;
783
784 ret = platform_device_add_resources(pdev, res, nres);
785 if (ret)
786 goto err;
787
788 ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
789 if (ret)
790 goto err;
791
792 ret = platform_device_add(pdev);
793 if (ret)
794 goto err;
795
796 return pdev;
797
798err:
799 platform_device_put(pdev);
800put_id:
801 ida_simple_remove(&ci_ida, id);
802 return ERR_PTR(ret);
803}
804EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
805
806void ci_hdrc_remove_device(struct platform_device *pdev)
807{
808 int id = pdev->id;
809 platform_device_unregister(pdev);
810 ida_simple_remove(&ci_ida, id);
811}
812EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
813
814static inline void ci_role_destroy(struct ci_hdrc *ci)
815{
816 ci_hdrc_gadget_destroy(ci);
817 ci_hdrc_host_destroy(ci);
818 if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
819 ci_hdrc_otg_destroy(ci);
820}
821
822static void ci_get_otg_capable(struct ci_hdrc *ci)
823{
824 if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
825 ci->is_otg = false;
826 else
827 ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
828 DCCPARAMS_DC | DCCPARAMS_HC)
829 == (DCCPARAMS_DC | DCCPARAMS_HC));
830 if (ci->is_otg) {
831 dev_dbg(ci->dev, "It is OTG capable controller\n");
832 /* Disable and clear all OTG irq */
833 hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
834 OTGSC_INT_STATUS_BITS);
835 }
836}
837
838static ssize_t role_show(struct device *dev, struct device_attribute *attr,
839 char *buf)
840{
841 struct ci_hdrc *ci = dev_get_drvdata(dev);
842
843 if (ci->role != CI_ROLE_END)
844 return sprintf(buf, "%s\n", ci_role(ci)->name);
845
846 return 0;
847}
848
849static ssize_t role_store(struct device *dev,
850 struct device_attribute *attr, const char *buf, size_t n)
851{
852 struct ci_hdrc *ci = dev_get_drvdata(dev);
853 enum ci_role role;
854 int ret;
855
856 if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) {
857 dev_warn(dev, "Current configuration is not dual-role, quit\n");
858 return -EPERM;
859 }
860
861 for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++)
862 if (!strncmp(buf, ci->roles[role]->name,
863 strlen(ci->roles[role]->name)))
864 break;
865
866 if (role == CI_ROLE_END || role == ci->role)
867 return -EINVAL;
868
869 pm_runtime_get_sync(dev);
870 disable_irq(ci->irq);
871 ci_role_stop(ci);
872 ret = ci_role_start(ci, role);
873 if (!ret && ci->role == CI_ROLE_GADGET)
874 ci_handle_vbus_change(ci);
875 enable_irq(ci->irq);
876 pm_runtime_put_sync(dev);
877
878 return (ret == 0) ? n : ret;
879}
880static DEVICE_ATTR_RW(role);
881
882static struct attribute *ci_attrs[] = {
883 &dev_attr_role.attr,
884 NULL,
885};
886
887static const struct attribute_group ci_attr_group = {
888 .attrs = ci_attrs,
889};
890
891static int ci_hdrc_probe(struct platform_device *pdev)
892{
893 struct device *dev = &pdev->dev;
894 struct ci_hdrc *ci;
895 struct resource *res;
896 void __iomem *base;
897 int ret;
898 enum usb_dr_mode dr_mode;
899
900 if (!dev_get_platdata(dev)) {
901 dev_err(dev, "platform data missing\n");
902 return -ENODEV;
903 }
904
905 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
906 base = devm_ioremap_resource(dev, res);
907 if (IS_ERR(base))
908 return PTR_ERR(base);
909
910 ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
911 if (!ci)
912 return -ENOMEM;
913
914 spin_lock_init(&ci->lock);
915 ci->dev = dev;
916 ci->platdata = dev_get_platdata(dev);
917 ci->imx28_write_fix = !!(ci->platdata->flags &
918 CI_HDRC_IMX28_WRITE_FIX);
919 ci->supports_runtime_pm = !!(ci->platdata->flags &
920 CI_HDRC_SUPPORTS_RUNTIME_PM);
921 platform_set_drvdata(pdev, ci);
922
923 ret = hw_device_init(ci, base);
924 if (ret < 0) {
925 dev_err(dev, "can't initialize hardware\n");
926 return -ENODEV;
927 }
928
929 ret = ci_ulpi_init(ci);
930 if (ret)
931 return ret;
932
933 if (ci->platdata->phy) {
934 ci->phy = ci->platdata->phy;
935 } else if (ci->platdata->usb_phy) {
936 ci->usb_phy = ci->platdata->usb_phy;
937 } else {
938 ci->phy = devm_phy_get(dev->parent, "usb-phy");
939 ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2);
940
941 /* if both generic PHY and USB PHY layers aren't enabled */
942 if (PTR_ERR(ci->phy) == -ENOSYS &&
943 PTR_ERR(ci->usb_phy) == -ENXIO) {
944 ret = -ENXIO;
945 goto ulpi_exit;
946 }
947
948 if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) {
949 ret = -EPROBE_DEFER;
950 goto ulpi_exit;
951 }
952
953 if (IS_ERR(ci->phy))
954 ci->phy = NULL;
955 else if (IS_ERR(ci->usb_phy))
956 ci->usb_phy = NULL;
957 }
958
959 ret = ci_usb_phy_init(ci);
960 if (ret) {
961 dev_err(dev, "unable to init phy: %d\n", ret);
962 return ret;
963 }
964
965 ci->hw_bank.phys = res->start;
966
967 ci->irq = platform_get_irq(pdev, 0);
968 if (ci->irq < 0) {
969 dev_err(dev, "missing IRQ\n");
970 ret = ci->irq;
971 goto deinit_phy;
972 }
973
974 ci_get_otg_capable(ci);
975
976 dr_mode = ci->platdata->dr_mode;
977 /* initialize role(s) before the interrupt is requested */
978 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
979 ret = ci_hdrc_host_init(ci);
980 if (ret) {
981 if (ret == -ENXIO)
982 dev_info(dev, "doesn't support host\n");
983 else
984 goto deinit_phy;
985 }
986 }
987
988 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
989 ret = ci_hdrc_gadget_init(ci);
990 if (ret) {
991 if (ret == -ENXIO)
992 dev_info(dev, "doesn't support gadget\n");
993 else
994 goto deinit_host;
995 }
996 }
997
998 if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
999 dev_err(dev, "no supported roles\n");
1000 ret = -ENODEV;
1001 goto deinit_gadget;
1002 }
1003
1004 if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
1005 ret = ci_hdrc_otg_init(ci);
1006 if (ret) {
1007 dev_err(dev, "init otg fails, ret = %d\n", ret);
1008 goto deinit_gadget;
1009 }
1010 }
1011
1012 if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
1013 if (ci->is_otg) {
1014 ci->role = ci_otg_role(ci);
1015 /* Enable ID change irq */
1016 hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
1017 } else {
1018 /*
1019 * If the controller is not OTG capable, but support
1020 * role switch, the defalt role is gadget, and the
1021 * user can switch it through debugfs.
1022 */
1023 ci->role = CI_ROLE_GADGET;
1024 }
1025 } else {
1026 ci->role = ci->roles[CI_ROLE_HOST]
1027 ? CI_ROLE_HOST
1028 : CI_ROLE_GADGET;
1029 }
1030
1031 if (!ci_otg_is_fsm_mode(ci)) {
1032 /* only update vbus status for peripheral */
1033 if (ci->role == CI_ROLE_GADGET)
1034 ci_handle_vbus_change(ci);
1035
1036 ret = ci_role_start(ci, ci->role);
1037 if (ret) {
1038 dev_err(dev, "can't start %s role\n",
1039 ci_role(ci)->name);
1040 goto stop;
1041 }
1042 }
1043
1044 ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
1045 ci->platdata->name, ci);
1046 if (ret)
1047 goto stop;
1048
1049 ret = ci_extcon_register(ci);
1050 if (ret)
1051 goto stop;
1052
1053 if (ci->supports_runtime_pm) {
1054 pm_runtime_set_active(&pdev->dev);
1055 pm_runtime_enable(&pdev->dev);
1056 pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
1057 pm_runtime_mark_last_busy(ci->dev);
1058 pm_runtime_use_autosuspend(&pdev->dev);
1059 }
1060
1061 if (ci_otg_is_fsm_mode(ci))
1062 ci_hdrc_otg_fsm_start(ci);
1063
1064 device_set_wakeup_capable(&pdev->dev, true);
1065 ret = dbg_create_files(ci);
1066 if (ret)
1067 goto stop;
1068
1069 ret = sysfs_create_group(&dev->kobj, &ci_attr_group);
1070 if (ret)
1071 goto remove_debug;
1072
1073 return 0;
1074
1075remove_debug:
1076 dbg_remove_files(ci);
1077stop:
1078 if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
1079 ci_hdrc_otg_destroy(ci);
1080deinit_gadget:
1081 ci_hdrc_gadget_destroy(ci);
1082deinit_host:
1083 ci_hdrc_host_destroy(ci);
1084deinit_phy:
1085 ci_usb_phy_exit(ci);
1086ulpi_exit:
1087 ci_ulpi_exit(ci);
1088
1089 return ret;
1090}
1091
1092static int ci_hdrc_remove(struct platform_device *pdev)
1093{
1094 struct ci_hdrc *ci = platform_get_drvdata(pdev);
1095
1096 if (ci->supports_runtime_pm) {
1097 pm_runtime_get_sync(&pdev->dev);
1098 pm_runtime_disable(&pdev->dev);
1099 pm_runtime_put_noidle(&pdev->dev);
1100 }
1101
1102 dbg_remove_files(ci);
1103 sysfs_remove_group(&ci->dev->kobj, &ci_attr_group);
1104 ci_role_destroy(ci);
1105 ci_hdrc_enter_lpm(ci, true);
1106 ci_usb_phy_exit(ci);
1107 ci_ulpi_exit(ci);
1108
1109 return 0;
1110}
1111
1112#ifdef CONFIG_PM
1113/* Prepare wakeup by SRP before suspend */
1114static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
1115{
1116 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1117 !hw_read_otgsc(ci, OTGSC_ID)) {
1118 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
1119 PORTSC_PP);
1120 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
1121 PORTSC_WKCN);
1122 }
1123}
1124
1125/* Handle SRP when wakeup by data pulse */
1126static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
1127{
1128 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1129 (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
1130 if (!hw_read_otgsc(ci, OTGSC_ID)) {
1131 ci->fsm.a_srp_det = 1;
1132 ci->fsm.a_bus_drop = 0;
1133 } else {
1134 ci->fsm.id = 1;
1135 }
1136 ci_otg_queue_work(ci);
1137 }
1138}
1139
1140static void ci_controller_suspend(struct ci_hdrc *ci)
1141{
1142 disable_irq(ci->irq);
1143 ci_hdrc_enter_lpm(ci, true);
1144 if (ci->platdata->phy_clkgate_delay_us)
1145 usleep_range(ci->platdata->phy_clkgate_delay_us,
1146 ci->platdata->phy_clkgate_delay_us + 50);
1147 usb_phy_set_suspend(ci->usb_phy, 1);
1148 ci->in_lpm = true;
1149 enable_irq(ci->irq);
1150}
1151
1152static int ci_controller_resume(struct device *dev)
1153{
1154 struct ci_hdrc *ci = dev_get_drvdata(dev);
1155 int ret;
1156
1157 dev_dbg(dev, "at %s\n", __func__);
1158
1159 if (!ci->in_lpm) {
1160 WARN_ON(1);
1161 return 0;
1162 }
1163
1164 ci_hdrc_enter_lpm(ci, false);
1165
1166 ret = ci_ulpi_resume(ci);
1167 if (ret)
1168 return ret;
1169
1170 if (ci->usb_phy) {
1171 usb_phy_set_suspend(ci->usb_phy, 0);
1172 usb_phy_set_wakeup(ci->usb_phy, false);
1173 hw_wait_phy_stable();
1174 }
1175
1176 ci->in_lpm = false;
1177 if (ci->wakeup_int) {
1178 ci->wakeup_int = false;
1179 pm_runtime_mark_last_busy(ci->dev);
1180 pm_runtime_put_autosuspend(ci->dev);
1181 enable_irq(ci->irq);
1182 if (ci_otg_is_fsm_mode(ci))
1183 ci_otg_fsm_wakeup_by_srp(ci);
1184 }
1185
1186 return 0;
1187}
1188
1189#ifdef CONFIG_PM_SLEEP
1190static int ci_suspend(struct device *dev)
1191{
1192 struct ci_hdrc *ci = dev_get_drvdata(dev);
1193
1194 if (ci->wq)
1195 flush_workqueue(ci->wq);
1196 /*
1197 * Controller needs to be active during suspend, otherwise the core
1198 * may run resume when the parent is at suspend if other driver's
1199 * suspend fails, it occurs before parent's suspend has not started,
1200 * but the core suspend has finished.
1201 */
1202 if (ci->in_lpm)
1203 pm_runtime_resume(dev);
1204
1205 if (ci->in_lpm) {
1206 WARN_ON(1);
1207 return 0;
1208 }
1209
1210 if (device_may_wakeup(dev)) {
1211 if (ci_otg_is_fsm_mode(ci))
1212 ci_otg_fsm_suspend_for_srp(ci);
1213
1214 usb_phy_set_wakeup(ci->usb_phy, true);
1215 enable_irq_wake(ci->irq);
1216 }
1217
1218 ci_controller_suspend(ci);
1219
1220 return 0;
1221}
1222
1223static int ci_resume(struct device *dev)
1224{
1225 struct ci_hdrc *ci = dev_get_drvdata(dev);
1226 int ret;
1227
1228 if (device_may_wakeup(dev))
1229 disable_irq_wake(ci->irq);
1230
1231 ret = ci_controller_resume(dev);
1232 if (ret)
1233 return ret;
1234
1235 if (ci->supports_runtime_pm) {
1236 pm_runtime_disable(dev);
1237 pm_runtime_set_active(dev);
1238 pm_runtime_enable(dev);
1239 }
1240
1241 return ret;
1242}
1243#endif /* CONFIG_PM_SLEEP */
1244
1245static int ci_runtime_suspend(struct device *dev)
1246{
1247 struct ci_hdrc *ci = dev_get_drvdata(dev);
1248
1249 dev_dbg(dev, "at %s\n", __func__);
1250
1251 if (ci->in_lpm) {
1252 WARN_ON(1);
1253 return 0;
1254 }
1255
1256 if (ci_otg_is_fsm_mode(ci))
1257 ci_otg_fsm_suspend_for_srp(ci);
1258
1259 usb_phy_set_wakeup(ci->usb_phy, true);
1260 ci_controller_suspend(ci);
1261
1262 return 0;
1263}
1264
1265static int ci_runtime_resume(struct device *dev)
1266{
1267 return ci_controller_resume(dev);
1268}
1269
1270#endif /* CONFIG_PM */
1271static const struct dev_pm_ops ci_pm_ops = {
1272 SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
1273 SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
1274};
1275
1276static struct platform_driver ci_hdrc_driver = {
1277 .probe = ci_hdrc_probe,
1278 .remove = ci_hdrc_remove,
1279 .driver = {
1280 .name = "ci_hdrc",
1281 .pm = &ci_pm_ops,
1282 },
1283};
1284
1285static int __init ci_hdrc_platform_register(void)
1286{
1287 ci_hdrc_host_driver_init();
1288 return platform_driver_register(&ci_hdrc_driver);
1289}
1290module_init(ci_hdrc_platform_register);
1291
1292static void __exit ci_hdrc_platform_unregister(void)
1293{
1294 platform_driver_unregister(&ci_hdrc_driver);
1295}
1296module_exit(ci_hdrc_platform_unregister);
1297
1298MODULE_ALIAS("platform:ci_hdrc");
1299MODULE_LICENSE("GPL v2");
1300MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
1301MODULE_DESCRIPTION("ChipIdea HDRC Driver");