1/*
   2 * Atmel maXTouch Touchscreen driver
   3 *
   4 * Copyright (C) 2010 Samsung Electronics Co.Ltd
   5 * Copyright (C) 2011-2014 Atmel Corporation
   6 * Copyright (C) 2012 Google, Inc.
 
   7 *
   8 * Author: Joonyoung Shim <jy0922.shim@samsung.com>
   9 *
  10 * This program is free software; you can redistribute  it and/or modify it
  11 * under  the terms of  the GNU General  Public License as published by the
  12 * Free Software Foundation;  either version 2 of the  License, or (at your
  13 * option) any later version.
  14 *
  15 */
  16
  17#include <linux/acpi.h>
  18#include <linux/dmi.h>
  19#include <linux/module.h>
  20#include <linux/init.h>
  21#include <linux/completion.h>
  22#include <linux/delay.h>
  23#include <linux/firmware.h>
  24#include <linux/i2c.h>
  25#include <linux/platform_data/atmel_mxt_ts.h>
  26#include <linux/input/mt.h>
  27#include <linux/interrupt.h>
  28#include <linux/of.h>
 
  29#include <linux/slab.h>
 
 
  30#include <asm/unaligned.h>
 
 
 
 
  31
  32/* Firmware files */
  33#define MXT_FW_NAME		"maxtouch.fw"
  34#define MXT_CFG_NAME		"maxtouch.cfg"
  35#define MXT_CFG_MAGIC		"OBP_RAW V1"
  36
  37/* Registers */
  38#define MXT_OBJECT_START	0x07
  39#define MXT_OBJECT_SIZE		6
  40#define MXT_INFO_CHECKSUM_SIZE	3
  41#define MXT_MAX_BLOCK_WRITE	256
  42
  43/* Object types */
  44#define MXT_DEBUG_DIAGNOSTIC_T37	37
  45#define MXT_GEN_MESSAGE_T5		5
  46#define MXT_GEN_COMMAND_T6		6
  47#define MXT_GEN_POWER_T7		7
  48#define MXT_GEN_ACQUIRE_T8		8
  49#define MXT_GEN_DATASOURCE_T53		53
  50#define MXT_TOUCH_MULTI_T9		9
  51#define MXT_TOUCH_KEYARRAY_T15		15
  52#define MXT_TOUCH_PROXIMITY_T23		23
  53#define MXT_TOUCH_PROXKEY_T52		52
  54#define MXT_PROCI_GRIPFACE_T20		20
  55#define MXT_PROCG_NOISE_T22		22
  56#define MXT_PROCI_ONETOUCH_T24		24
  57#define MXT_PROCI_TWOTOUCH_T27		27
  58#define MXT_PROCI_GRIP_T40		40
  59#define MXT_PROCI_PALM_T41		41
  60#define MXT_PROCI_TOUCHSUPPRESSION_T42	42
  61#define MXT_PROCI_STYLUS_T47		47
  62#define MXT_PROCG_NOISESUPPRESSION_T48	48
  63#define MXT_SPT_COMMSCONFIG_T18		18
  64#define MXT_SPT_GPIOPWM_T19		19
  65#define MXT_SPT_SELFTEST_T25		25
  66#define MXT_SPT_CTECONFIG_T28		28
  67#define MXT_SPT_USERDATA_T38		38
  68#define MXT_SPT_DIGITIZER_T43		43
  69#define MXT_SPT_MESSAGECOUNT_T44	44
  70#define MXT_SPT_CTECONFIG_T46		46
  71#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
  72
  73/* MXT_GEN_MESSAGE_T5 object */
  74#define MXT_RPTID_NOMSG		0xff
  75
  76/* MXT_GEN_COMMAND_T6 field */
  77#define MXT_COMMAND_RESET	0
  78#define MXT_COMMAND_BACKUPNV	1
  79#define MXT_COMMAND_CALIBRATE	2
  80#define MXT_COMMAND_REPORTALL	3
  81#define MXT_COMMAND_DIAGNOSTIC	5
  82
  83/* Define for T6 status byte */
  84#define MXT_T6_STATUS_RESET	(1 << 7)
  85#define MXT_T6_STATUS_OFL	(1 << 6)
  86#define MXT_T6_STATUS_SIGERR	(1 << 5)
  87#define MXT_T6_STATUS_CAL	(1 << 4)
  88#define MXT_T6_STATUS_CFGERR	(1 << 3)
  89#define MXT_T6_STATUS_COMSERR	(1 << 2)
  90
  91/* MXT_GEN_POWER_T7 field */
  92struct t7_config {
  93	u8 idle;
  94	u8 active;
  95} __packed;
  96
  97#define MXT_POWER_CFG_RUN		0
  98#define MXT_POWER_CFG_DEEPSLEEP		1
  99
 100/* MXT_TOUCH_MULTI_T9 field */
 101#define MXT_T9_CTRL		0
 
 
 102#define MXT_T9_ORIENT		9
 103#define MXT_T9_RANGE		18
 104
 105/* MXT_TOUCH_MULTI_T9 status */
 106#define MXT_T9_UNGRIP		(1 << 0)
 107#define MXT_T9_SUPPRESS		(1 << 1)
 108#define MXT_T9_AMP		(1 << 2)
 109#define MXT_T9_VECTOR		(1 << 3)
 110#define MXT_T9_MOVE		(1 << 4)
 111#define MXT_T9_RELEASE		(1 << 5)
 112#define MXT_T9_PRESS		(1 << 6)
 113#define MXT_T9_DETECT		(1 << 7)
 114
 115struct t9_range {
 116	__le16 x;
 117	__le16 y;
 118} __packed;
 119
 120/* MXT_TOUCH_MULTI_T9 orient */
 121#define MXT_T9_ORIENT_SWITCH	(1 << 0)
 
 
 122
 123/* MXT_SPT_COMMSCONFIG_T18 */
 124#define MXT_COMMS_CTRL		0
 125#define MXT_COMMS_CMD		1
 126
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 127/* Define for MXT_GEN_COMMAND_T6 */
 128#define MXT_BOOT_VALUE		0xa5
 129#define MXT_RESET_VALUE		0x01
 130#define MXT_BACKUP_VALUE	0x55
 131
 132/* T100 Multiple Touch Touchscreen */
 133#define MXT_T100_CTRL		0
 134#define MXT_T100_CFG1		1
 135#define MXT_T100_TCHAUX		3
 
 136#define MXT_T100_XRANGE		13
 
 137#define MXT_T100_YRANGE		24
 138
 139#define MXT_T100_CFG_SWITCHXY	BIT(5)
 
 
 140
 141#define MXT_T100_TCHAUX_VECT	BIT(0)
 142#define MXT_T100_TCHAUX_AMPL	BIT(1)
 143#define MXT_T100_TCHAUX_AREA	BIT(2)
 144
 145#define MXT_T100_DETECT		BIT(7)
 146#define MXT_T100_TYPE_MASK	0x70
 147
 148enum t100_type {
 149	MXT_T100_TYPE_FINGER		= 1,
 150	MXT_T100_TYPE_PASSIVE_STYLUS	= 2,
 151	MXT_T100_TYPE_HOVERING_FINGER	= 4,
 152	MXT_T100_TYPE_GLOVE		= 5,
 153	MXT_T100_TYPE_LARGE_TOUCH	= 6,
 154};
 155
 156#define MXT_DISTANCE_ACTIVE_TOUCH	0
 157#define MXT_DISTANCE_HOVERING		1
 158
 159#define MXT_TOUCH_MAJOR_DEFAULT		1
 160#define MXT_PRESSURE_DEFAULT		1
 161
 162/* Delay times */
 163#define MXT_BACKUP_TIME		50	/* msec */
 164#define MXT_RESET_TIME		200	/* msec */
 165#define MXT_RESET_TIMEOUT	3000	/* msec */
 166#define MXT_CRC_TIMEOUT		1000	/* msec */
 167#define MXT_FW_RESET_TIME	3000	/* msec */
 168#define MXT_FW_CHG_TIMEOUT	300	/* msec */
 169
 170/* Command to unlock bootloader */
 171#define MXT_UNLOCK_CMD_MSB	0xaa
 172#define MXT_UNLOCK_CMD_LSB	0xdc
 173
 174/* Bootloader mode status */
 175#define MXT_WAITING_BOOTLOAD_CMD	0xc0	/* valid 7 6 bit only */
 176#define MXT_WAITING_FRAME_DATA	0x80	/* valid 7 6 bit only */
 177#define MXT_FRAME_CRC_CHECK	0x02
 178#define MXT_FRAME_CRC_FAIL	0x03
 179#define MXT_FRAME_CRC_PASS	0x04
 180#define MXT_APP_CRC_FAIL	0x40	/* valid 7 8 bit only */
 181#define MXT_BOOT_STATUS_MASK	0x3f
 182#define MXT_BOOT_EXTENDED_ID	(1 << 5)
 183#define MXT_BOOT_ID_MASK	0x1f
 184
 185/* Touchscreen absolute values */
 186#define MXT_MAX_AREA		0xff
 187
 188#define MXT_PIXELS_PER_MM	20
 189
 190struct mxt_info {
 191	u8 family_id;
 192	u8 variant_id;
 193	u8 version;
 194	u8 build;
 195	u8 matrix_xsize;
 196	u8 matrix_ysize;
 197	u8 object_num;
 198};
 199
 200struct mxt_object {
 201	u8 type;
 202	u16 start_address;
 203	u8 size_minus_one;
 204	u8 instances_minus_one;
 205	u8 num_report_ids;
 206} __packed;
 207
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 208/* Each client has this additional data */
 209struct mxt_data {
 210	struct i2c_client *client;
 211	struct input_dev *input_dev;
 212	char phys[64];		/* device physical location */
 213	const struct mxt_platform_data *pdata;
 214	struct mxt_object *object_table;
 215	struct mxt_info info;
 
 216	unsigned int irq;
 217	unsigned int max_x;
 218	unsigned int max_y;
 
 
 219	bool xy_switch;
 
 
 220	bool in_bootloader;
 221	u16 mem_size;
 222	u8 t100_aux_ampl;
 223	u8 t100_aux_area;
 224	u8 t100_aux_vect;
 225	u8 max_reportid;
 226	u32 config_crc;
 227	u32 info_crc;
 228	u8 bootloader_addr;
 229	u8 *msg_buf;
 230	u8 t6_status;
 231	bool update_input;
 232	u8 last_message_count;
 233	u8 num_touchids;
 234	u8 multitouch;
 235	struct t7_config t7_cfg;
 
 
 236
 237	/* Cached parameters from object table */
 238	u16 T5_address;
 239	u8 T5_msg_size;
 240	u8 T6_reportid;
 241	u16 T6_address;
 242	u16 T7_address;
 243	u8 T9_reportid_min;
 244	u8 T9_reportid_max;
 245	u8 T19_reportid;
 246	u16 T44_address;
 247	u8 T100_reportid_min;
 248	u8 T100_reportid_max;
 249
 250	/* for fw update in bootloader */
 251	struct completion bl_completion;
 252
 253	/* for reset handling */
 254	struct completion reset_completion;
 255
 256	/* for config update handling */
 257	struct completion crc_completion;
 
 
 
 
 
 
 
 
 
 
 258};
 259
 260static size_t mxt_obj_size(const struct mxt_object *obj)
 261{
 262	return obj->size_minus_one + 1;
 263}
 264
 265static size_t mxt_obj_instances(const struct mxt_object *obj)
 266{
 267	return obj->instances_minus_one + 1;
 268}
 269
 270static bool mxt_object_readable(unsigned int type)
 271{
 272	switch (type) {
 273	case MXT_GEN_COMMAND_T6:
 274	case MXT_GEN_POWER_T7:
 275	case MXT_GEN_ACQUIRE_T8:
 276	case MXT_GEN_DATASOURCE_T53:
 277	case MXT_TOUCH_MULTI_T9:
 278	case MXT_TOUCH_KEYARRAY_T15:
 279	case MXT_TOUCH_PROXIMITY_T23:
 280	case MXT_TOUCH_PROXKEY_T52:
 
 281	case MXT_PROCI_GRIPFACE_T20:
 282	case MXT_PROCG_NOISE_T22:
 283	case MXT_PROCI_ONETOUCH_T24:
 284	case MXT_PROCI_TWOTOUCH_T27:
 285	case MXT_PROCI_GRIP_T40:
 286	case MXT_PROCI_PALM_T41:
 287	case MXT_PROCI_TOUCHSUPPRESSION_T42:
 288	case MXT_PROCI_STYLUS_T47:
 289	case MXT_PROCG_NOISESUPPRESSION_T48:
 290	case MXT_SPT_COMMSCONFIG_T18:
 291	case MXT_SPT_GPIOPWM_T19:
 292	case MXT_SPT_SELFTEST_T25:
 293	case MXT_SPT_CTECONFIG_T28:
 294	case MXT_SPT_USERDATA_T38:
 295	case MXT_SPT_DIGITIZER_T43:
 296	case MXT_SPT_CTECONFIG_T46:
 297		return true;
 298	default:
 299		return false;
 300	}
 301}
 302
 303static void mxt_dump_message(struct mxt_data *data, u8 *message)
 304{
 305	dev_dbg(&data->client->dev, "message: %*ph\n",
 306		data->T5_msg_size, message);
 307}
 308
 309static int mxt_wait_for_completion(struct mxt_data *data,
 310				   struct completion *comp,
 311				   unsigned int timeout_ms)
 312{
 313	struct device *dev = &data->client->dev;
 314	unsigned long timeout = msecs_to_jiffies(timeout_ms);
 315	long ret;
 316
 317	ret = wait_for_completion_interruptible_timeout(comp, timeout);
 318	if (ret < 0) {
 319		return ret;
 320	} else if (ret == 0) {
 321		dev_err(dev, "Wait for completion timed out.\n");
 322		return -ETIMEDOUT;
 323	}
 324	return 0;
 325}
 326
 327static int mxt_bootloader_read(struct mxt_data *data,
 328			       u8 *val, unsigned int count)
 329{
 330	int ret;
 331	struct i2c_msg msg;
 332
 333	msg.addr = data->bootloader_addr;
 334	msg.flags = data->client->flags & I2C_M_TEN;
 335	msg.flags |= I2C_M_RD;
 336	msg.len = count;
 337	msg.buf = val;
 338
 339	ret = i2c_transfer(data->client->adapter, &msg, 1);
 340	if (ret == 1) {
 341		ret = 0;
 342	} else {
 343		ret = ret < 0 ? ret : -EIO;
 344		dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
 345			__func__, ret);
 346	}
 347
 348	return ret;
 349}
 350
 351static int mxt_bootloader_write(struct mxt_data *data,
 352				const u8 * const val, unsigned int count)
 353{
 354	int ret;
 355	struct i2c_msg msg;
 356
 357	msg.addr = data->bootloader_addr;
 358	msg.flags = data->client->flags & I2C_M_TEN;
 359	msg.len = count;
 360	msg.buf = (u8 *)val;
 361
 362	ret = i2c_transfer(data->client->adapter, &msg, 1);
 363	if (ret == 1) {
 364		ret = 0;
 365	} else {
 366		ret = ret < 0 ? ret : -EIO;
 367		dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
 368			__func__, ret);
 369	}
 370
 371	return ret;
 372}
 373
 374static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
 375{
 376	u8 appmode = data->client->addr;
 377	u8 bootloader;
 
 378
 379	switch (appmode) {
 380	case 0x4a:
 381	case 0x4b:
 382		/* Chips after 1664S use different scheme */
 383		if (retry || data->info.family_id >= 0xa2) {
 384			bootloader = appmode - 0x24;
 385			break;
 386		}
 387		/* Fall through for normal case */
 388	case 0x4c:
 389	case 0x4d:
 390	case 0x5a:
 391	case 0x5b:
 392		bootloader = appmode - 0x26;
 393		break;
 394
 395	default:
 396		dev_err(&data->client->dev,
 397			"Appmode i2c address 0x%02x not found\n",
 398			appmode);
 399		return -EINVAL;
 400	}
 401
 402	data->bootloader_addr = bootloader;
 403	return 0;
 404}
 405
 406static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
 407{
 408	struct device *dev = &data->client->dev;
 409	int error;
 410	u8 val;
 411	bool crc_failure;
 412
 413	error = mxt_lookup_bootloader_address(data, alt_address);
 414	if (error)
 415		return error;
 416
 417	error = mxt_bootloader_read(data, &val, 1);
 418	if (error)
 419		return error;
 420
 421	/* Check app crc fail mode */
 422	crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
 423
 424	dev_err(dev, "Detected bootloader, status:%02X%s\n",
 425			val, crc_failure ? ", APP_CRC_FAIL" : "");
 426
 427	return 0;
 428}
 429
 430static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
 431{
 432	struct device *dev = &data->client->dev;
 433	u8 buf[3];
 434
 435	if (val & MXT_BOOT_EXTENDED_ID) {
 436		if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
 437			dev_err(dev, "%s: i2c failure\n", __func__);
 438			return val;
 439		}
 440
 441		dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
 442
 443		return buf[0];
 444	} else {
 445		dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
 446
 447		return val;
 448	}
 449}
 450
 451static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
 452				bool wait)
 453{
 454	struct device *dev = &data->client->dev;
 455	u8 val;
 456	int ret;
 457
 458recheck:
 459	if (wait) {
 460		/*
 461		 * In application update mode, the interrupt
 462		 * line signals state transitions. We must wait for the
 463		 * CHG assertion before reading the status byte.
 464		 * Once the status byte has been read, the line is deasserted.
 465		 */
 466		ret = mxt_wait_for_completion(data, &data->bl_completion,
 467					      MXT_FW_CHG_TIMEOUT);
 468		if (ret) {
 469			/*
 470			 * TODO: handle -ERESTARTSYS better by terminating
 471			 * fw update process before returning to userspace
 472			 * by writing length 0x000 to device (iff we are in
 473			 * WAITING_FRAME_DATA state).
 474			 */
 475			dev_err(dev, "Update wait error %d\n", ret);
 476			return ret;
 477		}
 478	}
 479
 480	ret = mxt_bootloader_read(data, &val, 1);
 481	if (ret)
 482		return ret;
 483
 484	if (state == MXT_WAITING_BOOTLOAD_CMD)
 485		val = mxt_get_bootloader_version(data, val);
 486
 487	switch (state) {
 488	case MXT_WAITING_BOOTLOAD_CMD:
 489	case MXT_WAITING_FRAME_DATA:
 490	case MXT_APP_CRC_FAIL:
 491		val &= ~MXT_BOOT_STATUS_MASK;
 492		break;
 493	case MXT_FRAME_CRC_PASS:
 494		if (val == MXT_FRAME_CRC_CHECK) {
 495			goto recheck;
 496		} else if (val == MXT_FRAME_CRC_FAIL) {
 497			dev_err(dev, "Bootloader CRC fail\n");
 498			return -EINVAL;
 499		}
 500		break;
 501	default:
 502		return -EINVAL;
 503	}
 504
 505	if (val != state) {
 506		dev_err(dev, "Invalid bootloader state %02X != %02X\n",
 507			val, state);
 508		return -EINVAL;
 509	}
 510
 511	return 0;
 512}
 513
 514static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
 515{
 516	int ret;
 517	u8 buf[2];
 518
 519	if (unlock) {
 520		buf[0] = MXT_UNLOCK_CMD_LSB;
 521		buf[1] = MXT_UNLOCK_CMD_MSB;
 522	} else {
 523		buf[0] = 0x01;
 524		buf[1] = 0x01;
 525	}
 526
 527	ret = mxt_bootloader_write(data, buf, 2);
 528	if (ret)
 529		return ret;
 530
 531	return 0;
 532}
 533
 534static int __mxt_read_reg(struct i2c_client *client,
 535			       u16 reg, u16 len, void *val)
 536{
 537	struct i2c_msg xfer[2];
 538	u8 buf[2];
 539	int ret;
 540
 541	buf[0] = reg & 0xff;
 542	buf[1] = (reg >> 8) & 0xff;
 543
 544	/* Write register */
 545	xfer[0].addr = client->addr;
 546	xfer[0].flags = 0;
 547	xfer[0].len = 2;
 548	xfer[0].buf = buf;
 549
 550	/* Read data */
 551	xfer[1].addr = client->addr;
 552	xfer[1].flags = I2C_M_RD;
 553	xfer[1].len = len;
 554	xfer[1].buf = val;
 555
 556	ret = i2c_transfer(client->adapter, xfer, 2);
 557	if (ret == 2) {
 558		ret = 0;
 559	} else {
 560		if (ret >= 0)
 561			ret = -EIO;
 562		dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
 563			__func__, ret);
 564	}
 565
 566	return ret;
 567}
 568
 569static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
 570			   const void *val)
 571{
 572	u8 *buf;
 573	size_t count;
 574	int ret;
 575
 576	count = len + 2;
 577	buf = kmalloc(count, GFP_KERNEL);
 578	if (!buf)
 579		return -ENOMEM;
 580
 581	buf[0] = reg & 0xff;
 582	buf[1] = (reg >> 8) & 0xff;
 583	memcpy(&buf[2], val, len);
 584
 585	ret = i2c_master_send(client, buf, count);
 586	if (ret == count) {
 587		ret = 0;
 588	} else {
 589		if (ret >= 0)
 590			ret = -EIO;
 591		dev_err(&client->dev, "%s: i2c send failed (%d)\n",
 592			__func__, ret);
 593	}
 594
 595	kfree(buf);
 596	return ret;
 597}
 598
 599static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
 600{
 601	return __mxt_write_reg(client, reg, 1, &val);
 602}
 603
 604static struct mxt_object *
 605mxt_get_object(struct mxt_data *data, u8 type)
 606{
 607	struct mxt_object *object;
 608	int i;
 609
 610	for (i = 0; i < data->info.object_num; i++) {
 611		object = data->object_table + i;
 612		if (object->type == type)
 613			return object;
 614	}
 615
 616	dev_warn(&data->client->dev, "Invalid object type T%u\n", type);
 617	return NULL;
 618}
 619
 620static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
 621{
 622	struct device *dev = &data->client->dev;
 623	u8 status = msg[1];
 624	u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16);
 625
 626	complete(&data->crc_completion);
 627
 628	if (crc != data->config_crc) {
 629		data->config_crc = crc;
 630		dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc);
 631	}
 632
 633	/* Detect reset */
 634	if (status & MXT_T6_STATUS_RESET)
 635		complete(&data->reset_completion);
 636
 637	/* Output debug if status has changed */
 638	if (status != data->t6_status)
 639		dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n",
 640			status,
 641			status == 0 ? " OK" : "",
 642			status & MXT_T6_STATUS_RESET ? " RESET" : "",
 643			status & MXT_T6_STATUS_OFL ? " OFL" : "",
 644			status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "",
 645			status & MXT_T6_STATUS_CAL ? " CAL" : "",
 646			status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "",
 647			status & MXT_T6_STATUS_COMSERR ? " COMSERR" : "");
 648
 649	/* Save current status */
 650	data->t6_status = status;
 651}
 652
 653static int mxt_write_object(struct mxt_data *data,
 654				 u8 type, u8 offset, u8 val)
 655{
 656	struct mxt_object *object;
 657	u16 reg;
 658
 659	object = mxt_get_object(data, type);
 660	if (!object || offset >= mxt_obj_size(object))
 661		return -EINVAL;
 662
 663	reg = object->start_address;
 664	return mxt_write_reg(data->client, reg + offset, val);
 665}
 666
 667static void mxt_input_button(struct mxt_data *data, u8 *message)
 668{
 669	struct input_dev *input = data->input_dev;
 670	const struct mxt_platform_data *pdata = data->pdata;
 671	int i;
 672
 673	for (i = 0; i < pdata->t19_num_keys; i++) {
 674		if (pdata->t19_keymap[i] == KEY_RESERVED)
 675			continue;
 676
 677		/* Active-low switch */
 678		input_report_key(input, pdata->t19_keymap[i],
 679				 !(message[1] & BIT(i)));
 680	}
 681}
 682
 683static void mxt_input_sync(struct mxt_data *data)
 684{
 685	input_mt_report_pointer_emulation(data->input_dev,
 686					  data->pdata->t19_num_keys);
 687	input_sync(data->input_dev);
 688}
 689
 690static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 691{
 692	struct device *dev = &data->client->dev;
 693	struct input_dev *input_dev = data->input_dev;
 694	int id;
 695	u8 status;
 696	int x;
 697	int y;
 698	int area;
 699	int amplitude;
 700
 701	id = message[0] - data->T9_reportid_min;
 702	status = message[1];
 703	x = (message[2] << 4) | ((message[4] >> 4) & 0xf);
 704	y = (message[3] << 4) | ((message[4] & 0xf));
 705
 706	/* Handle 10/12 bit switching */
 707	if (data->max_x < 1024)
 708		x >>= 2;
 709	if (data->max_y < 1024)
 710		y >>= 2;
 711
 712	area = message[5];
 713	amplitude = message[6];
 714
 715	dev_dbg(dev,
 716		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
 717		id,
 718		(status & MXT_T9_DETECT) ? 'D' : '.',
 719		(status & MXT_T9_PRESS) ? 'P' : '.',
 720		(status & MXT_T9_RELEASE) ? 'R' : '.',
 721		(status & MXT_T9_MOVE) ? 'M' : '.',
 722		(status & MXT_T9_VECTOR) ? 'V' : '.',
 723		(status & MXT_T9_AMP) ? 'A' : '.',
 724		(status & MXT_T9_SUPPRESS) ? 'S' : '.',
 725		(status & MXT_T9_UNGRIP) ? 'U' : '.',
 726		x, y, area, amplitude);
 727
 728	input_mt_slot(input_dev, id);
 729
 730	if (status & MXT_T9_DETECT) {
 731		/*
 732		 * Multiple bits may be set if the host is slow to read
 733		 * the status messages, indicating all the events that
 734		 * have happened.
 735		 */
 736		if (status & MXT_T9_RELEASE) {
 737			input_mt_report_slot_state(input_dev,
 738						   MT_TOOL_FINGER, 0);
 739			mxt_input_sync(data);
 740		}
 741
 742		/* Touch active */
 743		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
 744		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
 745		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
 746		input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
 747		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
 748	} else {
 749		/* Touch no longer active, close out slot */
 750		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
 751	}
 752
 753	data->update_input = true;
 754}
 755
 756static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
 757{
 758	struct device *dev = &data->client->dev;
 759	struct input_dev *input_dev = data->input_dev;
 760	int id;
 761	u8 status;
 762	u8 type = 0;
 763	u16 x;
 764	u16 y;
 765	int distance = 0;
 766	int tool = 0;
 767	u8 major = 0;
 768	u8 pressure = 0;
 769	u8 orientation = 0;
 770
 771	id = message[0] - data->T100_reportid_min - 2;
 772
 773	/* ignore SCRSTATUS events */
 774	if (id < 0)
 775		return;
 776
 777	status = message[1];
 778	x = get_unaligned_le16(&message[2]);
 779	y = get_unaligned_le16(&message[4]);
 780
 781	if (status & MXT_T100_DETECT) {
 782		type = (status & MXT_T100_TYPE_MASK) >> 4;
 783
 784		switch (type) {
 785		case MXT_T100_TYPE_HOVERING_FINGER:
 786			tool = MT_TOOL_FINGER;
 787			distance = MXT_DISTANCE_HOVERING;
 788
 789			if (data->t100_aux_vect)
 790				orientation = message[data->t100_aux_vect];
 791
 792			break;
 793
 794		case MXT_T100_TYPE_FINGER:
 795		case MXT_T100_TYPE_GLOVE:
 796			tool = MT_TOOL_FINGER;
 797			distance = MXT_DISTANCE_ACTIVE_TOUCH;
 798
 799			if (data->t100_aux_area)
 800				major = message[data->t100_aux_area];
 801
 802			if (data->t100_aux_ampl)
 803				pressure = message[data->t100_aux_ampl];
 804
 805			if (data->t100_aux_vect)
 806				orientation = message[data->t100_aux_vect];
 807
 808			break;
 809
 810		case MXT_T100_TYPE_PASSIVE_STYLUS:
 811			tool = MT_TOOL_PEN;
 812
 813			/*
 814			 * Passive stylus is reported with size zero so
 815			 * hardcode.
 816			 */
 817			major = MXT_TOUCH_MAJOR_DEFAULT;
 818
 819			if (data->t100_aux_ampl)
 820				pressure = message[data->t100_aux_ampl];
 821
 822			break;
 823
 824		case MXT_T100_TYPE_LARGE_TOUCH:
 825			/* Ignore suppressed touch */
 826			break;
 827
 828		default:
 829			dev_dbg(dev, "Unexpected T100 type\n");
 830			return;
 831		}
 832	}
 833
 834	/*
 835	 * Values reported should be non-zero if tool is touching the
 836	 * device
 837	 */
 838	if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
 839		pressure = MXT_PRESSURE_DEFAULT;
 840
 841	input_mt_slot(input_dev, id);
 842
 843	if (status & MXT_T100_DETECT) {
 844		dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
 845			id, type, x, y, major, pressure, orientation);
 846
 847		input_mt_report_slot_state(input_dev, tool, 1);
 848		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
 849		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
 850		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major);
 851		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
 852		input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
 853		input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
 854	} else {
 855		dev_dbg(dev, "[%u] release\n", id);
 856
 857		/* close out slot */
 858		input_mt_report_slot_state(input_dev, 0, 0);
 859	}
 860
 861	data->update_input = true;
 862}
 863
 864static int mxt_proc_message(struct mxt_data *data, u8 *message)
 865{
 866	u8 report_id = message[0];
 867
 868	if (report_id == MXT_RPTID_NOMSG)
 869		return 0;
 870
 871	if (report_id == data->T6_reportid) {
 872		mxt_proc_t6_messages(data, message);
 873	} else if (!data->input_dev) {
 874		/*
 875		 * Do not report events if input device
 876		 * is not yet registered.
 877		 */
 878		mxt_dump_message(data, message);
 879	} else if (report_id >= data->T9_reportid_min &&
 880		   report_id <= data->T9_reportid_max) {
 881		mxt_proc_t9_message(data, message);
 882	} else if (report_id >= data->T100_reportid_min &&
 883		   report_id <= data->T100_reportid_max) {
 884		mxt_proc_t100_message(data, message);
 885	} else if (report_id == data->T19_reportid) {
 886		mxt_input_button(data, message);
 887		data->update_input = true;
 888	} else {
 889		mxt_dump_message(data, message);
 890	}
 891
 892	return 1;
 893}
 894
 895static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
 896{
 897	struct device *dev = &data->client->dev;
 898	int ret;
 899	int i;
 900	u8 num_valid = 0;
 901
 902	/* Safety check for msg_buf */
 903	if (count > data->max_reportid)
 904		return -EINVAL;
 905
 906	/* Process remaining messages if necessary */
 907	ret = __mxt_read_reg(data->client, data->T5_address,
 908				data->T5_msg_size * count, data->msg_buf);
 909	if (ret) {
 910		dev_err(dev, "Failed to read %u messages (%d)\n", count, ret);
 911		return ret;
 912	}
 913
 914	for (i = 0;  i < count; i++) {
 915		ret = mxt_proc_message(data,
 916			data->msg_buf + data->T5_msg_size * i);
 917
 918		if (ret == 1)
 919			num_valid++;
 920	}
 921
 922	/* return number of messages read */
 923	return num_valid;
 924}
 925
 926static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 927{
 928	struct device *dev = &data->client->dev;
 929	int ret;
 930	u8 count, num_left;
 931
 932	/* Read T44 and T5 together */
 933	ret = __mxt_read_reg(data->client, data->T44_address,
 934		data->T5_msg_size + 1, data->msg_buf);
 935	if (ret) {
 936		dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret);
 937		return IRQ_NONE;
 938	}
 939
 940	count = data->msg_buf[0];
 941
 942	/*
 943	 * This condition may be caused by the CHG line being configured in
 944	 * Mode 0. It results in unnecessary I2C operations but it is benign.
 945	 */
 946	if (count == 0)
 947		return IRQ_NONE;
 948
 949	if (count > data->max_reportid) {
 950		dev_warn(dev, "T44 count %d exceeded max report id\n", count);
 951		count = data->max_reportid;
 952	}
 953
 954	/* Process first message */
 955	ret = mxt_proc_message(data, data->msg_buf + 1);
 956	if (ret < 0) {
 957		dev_warn(dev, "Unexpected invalid message\n");
 958		return IRQ_NONE;
 959	}
 960
 961	num_left = count - 1;
 962
 963	/* Process remaining messages if necessary */
 964	if (num_left) {
 965		ret = mxt_read_and_process_messages(data, num_left);
 966		if (ret < 0)
 967			goto end;
 968		else if (ret != num_left)
 969			dev_warn(dev, "Unexpected invalid message\n");
 970	}
 971
 972end:
 973	if (data->update_input) {
 974		mxt_input_sync(data);
 975		data->update_input = false;
 976	}
 977
 978	return IRQ_HANDLED;
 979}
 980
 981static int mxt_process_messages_until_invalid(struct mxt_data *data)
 982{
 983	struct device *dev = &data->client->dev;
 984	int count, read;
 985	u8 tries = 2;
 986
 987	count = data->max_reportid;
 988
 989	/* Read messages until we force an invalid */
 990	do {
 991		read = mxt_read_and_process_messages(data, count);
 992		if (read < count)
 993			return 0;
 994	} while (--tries);
 995
 996	if (data->update_input) {
 997		mxt_input_sync(data);
 998		data->update_input = false;
 999	}
1000
1001	dev_err(dev, "CHG pin isn't cleared\n");
1002	return -EBUSY;
1003}
1004
1005static irqreturn_t mxt_process_messages(struct mxt_data *data)
1006{
1007	int total_handled, num_handled;
1008	u8 count = data->last_message_count;
1009
1010	if (count < 1 || count > data->max_reportid)
1011		count = 1;
1012
1013	/* include final invalid message */
1014	total_handled = mxt_read_and_process_messages(data, count + 1);
1015	if (total_handled < 0)
1016		return IRQ_NONE;
1017	/* if there were invalid messages, then we are done */
1018	else if (total_handled <= count)
1019		goto update_count;
1020
1021	/* keep reading two msgs until one is invalid or reportid limit */
1022	do {
1023		num_handled = mxt_read_and_process_messages(data, 2);
1024		if (num_handled < 0)
1025			return IRQ_NONE;
1026
1027		total_handled += num_handled;
1028
1029		if (num_handled < 2)
1030			break;
1031	} while (total_handled < data->num_touchids);
1032
1033update_count:
1034	data->last_message_count = total_handled;
1035
1036	if (data->update_input) {
1037		mxt_input_sync(data);
1038		data->update_input = false;
1039	}
1040
1041	return IRQ_HANDLED;
1042}
1043
1044static irqreturn_t mxt_interrupt(int irq, void *dev_id)
1045{
1046	struct mxt_data *data = dev_id;
1047
1048	if (data->in_bootloader) {
1049		/* bootloader state transition completion */
1050		complete(&data->bl_completion);
1051		return IRQ_HANDLED;
1052	}
1053
1054	if (!data->object_table)
1055		return IRQ_HANDLED;
1056
1057	if (data->T44_address) {
1058		return mxt_process_messages_t44(data);
1059	} else {
1060		return mxt_process_messages(data);
1061	}
1062}
1063
1064static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
1065			  u8 value, bool wait)
1066{
1067	u16 reg;
1068	u8 command_register;
1069	int timeout_counter = 0;
1070	int ret;
1071
1072	reg = data->T6_address + cmd_offset;
1073
1074	ret = mxt_write_reg(data->client, reg, value);
1075	if (ret)
1076		return ret;
1077
1078	if (!wait)
1079		return 0;
1080
1081	do {
1082		msleep(20);
1083		ret = __mxt_read_reg(data->client, reg, 1, &command_register);
1084		if (ret)
1085			return ret;
1086	} while (command_register != 0 && timeout_counter++ <= 100);
1087
1088	if (timeout_counter > 100) {
1089		dev_err(&data->client->dev, "Command failed!\n");
1090		return -EIO;
1091	}
1092
1093	return 0;
1094}
1095
1096static int mxt_acquire_irq(struct mxt_data *data)
1097{
1098	int error;
1099
1100	enable_irq(data->irq);
1101
1102	error = mxt_process_messages_until_invalid(data);
1103	if (error)
1104		return error;
1105
1106	return 0;
1107}
1108
1109static int mxt_soft_reset(struct mxt_data *data)
1110{
1111	struct device *dev = &data->client->dev;
1112	int ret = 0;
1113
1114	dev_info(dev, "Resetting device\n");
1115
1116	disable_irq(data->irq);
1117
1118	reinit_completion(&data->reset_completion);
1119
1120	ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
1121	if (ret)
1122		return ret;
1123
1124	/* Ignore CHG line for 100ms after reset */
1125	msleep(100);
1126
1127	mxt_acquire_irq(data);
1128
1129	ret = mxt_wait_for_completion(data, &data->reset_completion,
1130				      MXT_RESET_TIMEOUT);
1131	if (ret)
1132		return ret;
1133
1134	return 0;
1135}
1136
1137static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
1138{
1139	/*
1140	 * On failure, CRC is set to 0 and config will always be
1141	 * downloaded.
1142	 */
1143	data->config_crc = 0;
1144	reinit_completion(&data->crc_completion);
1145
1146	mxt_t6_command(data, cmd, value, true);
1147
1148	/*
1149	 * Wait for crc message. On failure, CRC is set to 0 and config will
1150	 * always be downloaded.
1151	 */
1152	mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
1153}
1154
1155static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte)
1156{
1157	static const unsigned int crcpoly = 0x80001B;
1158	u32 result;
1159	u32 data_word;
1160
1161	data_word = (secondbyte << 8) | firstbyte;
1162	result = ((*crc << 1) ^ data_word);
1163
1164	if (result & 0x1000000)
1165		result ^= crcpoly;
1166
1167	*crc = result;
1168}
1169
1170static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
1171{
1172	u32 crc = 0;
1173	u8 *ptr = base + start_off;
1174	u8 *last_val = base + end_off - 1;
1175
1176	if (end_off < start_off)
1177		return -EINVAL;
1178
1179	while (ptr < last_val) {
1180		mxt_calc_crc24(&crc, *ptr, *(ptr + 1));
1181		ptr += 2;
1182	}
1183
1184	/* if len is odd, fill the last byte with 0 */
1185	if (ptr == last_val)
1186		mxt_calc_crc24(&crc, *ptr, 0);
1187
1188	/* Mask to 24-bit */
1189	crc &= 0x00FFFFFF;
1190
1191	return crc;
1192}
1193
1194static int mxt_prepare_cfg_mem(struct mxt_data *data,
1195			       const struct firmware *cfg,
1196			       unsigned int data_pos,
1197			       unsigned int cfg_start_ofs,
1198			       u8 *config_mem,
1199			       size_t config_mem_size)
1200{
1201	struct device *dev = &data->client->dev;
1202	struct mxt_object *object;
1203	unsigned int type, instance, size, byte_offset;
1204	int offset;
1205	int ret;
1206	int i;
1207	u16 reg;
1208	u8 val;
1209
1210	while (data_pos < cfg->size) {
1211		/* Read type, instance, length */
1212		ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
1213			     &type, &instance, &size, &offset);
1214		if (ret == 0) {
1215			/* EOF */
1216			break;
1217		} else if (ret != 3) {
1218			dev_err(dev, "Bad format: failed to parse object\n");
1219			return -EINVAL;
1220		}
1221		data_pos += offset;
1222
1223		object = mxt_get_object(data, type);
1224		if (!object) {
1225			/* Skip object */
1226			for (i = 0; i < size; i++) {
1227				ret = sscanf(cfg->data + data_pos, "%hhx%n",
1228					     &val, &offset);
1229				if (ret != 1) {
1230					dev_err(dev, "Bad format in T%d at %d\n",
1231						type, i);
1232					return -EINVAL;
1233				}
1234				data_pos += offset;
1235			}
1236			continue;
1237		}
1238
1239		if (size > mxt_obj_size(object)) {
1240			/*
1241			 * Either we are in fallback mode due to wrong
1242			 * config or config from a later fw version,
1243			 * or the file is corrupt or hand-edited.
1244			 */
1245			dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
1246				 size - mxt_obj_size(object), type);
1247		} else if (mxt_obj_size(object) > size) {
1248			/*
1249			 * If firmware is upgraded, new bytes may be added to
1250			 * end of objects. It is generally forward compatible
1251			 * to zero these bytes - previous behaviour will be
1252			 * retained. However this does invalidate the CRC and
1253			 * will force fallback mode until the configuration is
1254			 * updated. We warn here but do nothing else - the
1255			 * malloc has zeroed the entire configuration.
1256			 */
1257			dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
1258				 mxt_obj_size(object) - size, type);
1259		}
1260
1261		if (instance >= mxt_obj_instances(object)) {
1262			dev_err(dev, "Object instances exceeded!\n");
1263			return -EINVAL;
1264		}
1265
1266		reg = object->start_address + mxt_obj_size(object) * instance;
1267
1268		for (i = 0; i < size; i++) {
1269			ret = sscanf(cfg->data + data_pos, "%hhx%n",
1270				     &val,
1271				     &offset);
1272			if (ret != 1) {
1273				dev_err(dev, "Bad format in T%d at %d\n",
1274					type, i);
1275				return -EINVAL;
1276			}
1277			data_pos += offset;
1278
1279			if (i > mxt_obj_size(object))
1280				continue;
1281
1282			byte_offset = reg + i - cfg_start_ofs;
1283
1284			if (byte_offset >= 0 && byte_offset < config_mem_size) {
1285				*(config_mem + byte_offset) = val;
1286			} else {
1287				dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
1288					reg, object->type, byte_offset);
1289				return -EINVAL;
1290			}
1291		}
1292	}
1293
1294	return 0;
1295}
1296
1297static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start,
1298			      u8 *config_mem, size_t config_mem_size)
1299{
1300	unsigned int byte_offset = 0;
1301	int error;
1302
1303	/* Write configuration as blocks */
1304	while (byte_offset < config_mem_size) {
1305		unsigned int size = config_mem_size - byte_offset;
1306
1307		if (size > MXT_MAX_BLOCK_WRITE)
1308			size = MXT_MAX_BLOCK_WRITE;
1309
1310		error = __mxt_write_reg(data->client,
1311					cfg_start + byte_offset,
1312					size, config_mem + byte_offset);
1313		if (error) {
1314			dev_err(&data->client->dev,
1315				"Config write error, ret=%d\n", error);
1316			return error;
1317		}
1318
1319		byte_offset += size;
1320	}
1321
1322	return 0;
1323}
1324
1325static int mxt_init_t7_power_cfg(struct mxt_data *data);
1326
1327/*
1328 * mxt_update_cfg - download configuration to chip
1329 *
1330 * Atmel Raw Config File Format
1331 *
1332 * The first four lines of the raw config file contain:
1333 *  1) Version
1334 *  2) Chip ID Information (first 7 bytes of device memory)
1335 *  3) Chip Information Block 24-bit CRC Checksum
1336 *  4) Chip Configuration 24-bit CRC Checksum
1337 *
1338 * The rest of the file consists of one line per object instance:
1339 *   <TYPE> <INSTANCE> <SIZE> <CONTENTS>
1340 *
1341 *   <TYPE> - 2-byte object type as hex
1342 *   <INSTANCE> - 2-byte object instance number as hex
1343 *   <SIZE> - 2-byte object size as hex
1344 *   <CONTENTS> - array of <SIZE> 1-byte hex values
1345 */
1346static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
1347{
1348	struct device *dev = &data->client->dev;
1349	struct mxt_info cfg_info;
1350	int ret;
1351	int offset;
1352	int data_pos;
1353	int i;
1354	int cfg_start_ofs;
1355	u32 info_crc, config_crc, calculated_crc;
1356	u8 *config_mem;
1357	size_t config_mem_size;
1358
1359	mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
1360
1361	if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
1362		dev_err(dev, "Unrecognised config file\n");
1363		return -EINVAL;
1364	}
1365
1366	data_pos = strlen(MXT_CFG_MAGIC);
1367
1368	/* Load information block and check */
1369	for (i = 0; i < sizeof(struct mxt_info); i++) {
1370		ret = sscanf(cfg->data + data_pos, "%hhx%n",
1371			     (unsigned char *)&cfg_info + i,
1372			     &offset);
1373		if (ret != 1) {
1374			dev_err(dev, "Bad format\n");
1375			return -EINVAL;
1376		}
1377
1378		data_pos += offset;
1379	}
1380
1381	if (cfg_info.family_id != data->info.family_id) {
1382		dev_err(dev, "Family ID mismatch!\n");
1383		return -EINVAL;
1384	}
1385
1386	if (cfg_info.variant_id != data->info.variant_id) {
1387		dev_err(dev, "Variant ID mismatch!\n");
1388		return -EINVAL;
1389	}
1390
1391	/* Read CRCs */
1392	ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
1393	if (ret != 1) {
1394		dev_err(dev, "Bad format: failed to parse Info CRC\n");
1395		return -EINVAL;
1396	}
1397	data_pos += offset;
1398
1399	ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
1400	if (ret != 1) {
1401		dev_err(dev, "Bad format: failed to parse Config CRC\n");
1402		return -EINVAL;
1403	}
1404	data_pos += offset;
1405
1406	/*
1407	 * The Info Block CRC is calculated over mxt_info and the object
1408	 * table. If it does not match then we are trying to load the
1409	 * configuration from a different chip or firmware version, so
1410	 * the configuration CRC is invalid anyway.
1411	 */
1412	if (info_crc == data->info_crc) {
1413		if (config_crc == 0 || data->config_crc == 0) {
1414			dev_info(dev, "CRC zero, attempting to apply config\n");
1415		} else if (config_crc == data->config_crc) {
1416			dev_dbg(dev, "Config CRC 0x%06X: OK\n",
1417				 data->config_crc);
1418			return 0;
1419		} else {
1420			dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
1421				 data->config_crc, config_crc);
1422		}
1423	} else {
1424		dev_warn(dev,
1425			 "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
1426			 data->info_crc, info_crc);
1427	}
1428
1429	/* Malloc memory to store configuration */
1430	cfg_start_ofs = MXT_OBJECT_START +
1431			data->info.object_num * sizeof(struct mxt_object) +
1432			MXT_INFO_CHECKSUM_SIZE;
1433	config_mem_size = data->mem_size - cfg_start_ofs;
1434	config_mem = kzalloc(config_mem_size, GFP_KERNEL);
1435	if (!config_mem) {
1436		dev_err(dev, "Failed to allocate memory\n");
1437		return -ENOMEM;
1438	}
1439
1440	ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs,
1441				  config_mem, config_mem_size);
1442	if (ret)
1443		goto release_mem;
1444
1445	/* Calculate crc of the received configs (not the raw config file) */
1446	if (data->T7_address < cfg_start_ofs) {
1447		dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n",
1448			data->T7_address, cfg_start_ofs);
1449		ret = 0;
1450		goto release_mem;
1451	}
1452
1453	calculated_crc = mxt_calculate_crc(config_mem,
1454					   data->T7_address - cfg_start_ofs,
1455					   config_mem_size);
1456
1457	if (config_crc > 0 && config_crc != calculated_crc)
1458		dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
1459			 calculated_crc, config_crc);
1460
1461	ret = mxt_upload_cfg_mem(data, cfg_start_ofs,
1462				 config_mem, config_mem_size);
1463	if (ret)
1464		goto release_mem;
1465
1466	mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
1467
1468	ret = mxt_soft_reset(data);
1469	if (ret)
1470		goto release_mem;
1471
1472	dev_info(dev, "Config successfully updated\n");
1473
1474	/* T7 config may have changed */
1475	mxt_init_t7_power_cfg(data);
1476
1477release_mem:
1478	kfree(config_mem);
1479	return ret;
1480}
1481
1482static int mxt_get_info(struct mxt_data *data)
1483{
1484	struct i2c_client *client = data->client;
1485	struct mxt_info *info = &data->info;
1486	int error;
1487
1488	/* Read 7-byte info block starting at address 0 */
1489	error = __mxt_read_reg(client, 0, sizeof(*info), info);
1490	if (error)
1491		return error;
1492
1493	return 0;
1494}
1495
1496static void mxt_free_input_device(struct mxt_data *data)
1497{
1498	if (data->input_dev) {
1499		input_unregister_device(data->input_dev);
1500		data->input_dev = NULL;
1501	}
1502}
1503
1504static void mxt_free_object_table(struct mxt_data *data)
1505{
1506	kfree(data->object_table);
 
 
 
1507	data->object_table = NULL;
 
 
 
1508	kfree(data->msg_buf);
1509	data->msg_buf = NULL;
1510	data->T5_address = 0;
1511	data->T5_msg_size = 0;
1512	data->T6_reportid = 0;
1513	data->T7_address = 0;
1514	data->T9_reportid_min = 0;
1515	data->T9_reportid_max = 0;
1516	data->T19_reportid = 0;
1517	data->T44_address = 0;
1518	data->T100_reportid_min = 0;
1519	data->T100_reportid_max = 0;
1520	data->max_reportid = 0;
1521}
1522
1523static int mxt_get_object_table(struct mxt_data *data)
 
1524{
1525	struct i2c_client *client = data->client;
1526	size_t table_size;
1527	struct mxt_object *object_table;
1528	int error;
1529	int i;
1530	u8 reportid;
1531	u16 end_address;
1532
1533	table_size = data->info.object_num * sizeof(struct mxt_object);
1534	object_table = kzalloc(table_size, GFP_KERNEL);
1535	if (!object_table) {
1536		dev_err(&data->client->dev, "Failed to allocate memory\n");
1537		return -ENOMEM;
1538	}
1539
1540	error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
1541			object_table);
1542	if (error) {
1543		kfree(object_table);
1544		return error;
1545	}
1546
1547	/* Valid Report IDs start counting from 1 */
1548	reportid = 1;
1549	data->mem_size = 0;
1550	for (i = 0; i < data->info.object_num; i++) {
1551		struct mxt_object *object = object_table + i;
1552		u8 min_id, max_id;
1553
1554		le16_to_cpus(&object->start_address);
1555
1556		if (object->num_report_ids) {
1557			min_id = reportid;
1558			reportid += object->num_report_ids *
1559					mxt_obj_instances(object);
1560			max_id = reportid - 1;
1561		} else {
1562			min_id = 0;
1563			max_id = 0;
1564		}
1565
1566		dev_dbg(&data->client->dev,
1567			"T%u Start:%u Size:%zu Instances:%zu Report IDs:%u-%u\n",
1568			object->type, object->start_address,
1569			mxt_obj_size(object), mxt_obj_instances(object),
1570			min_id, max_id);
1571
1572		switch (object->type) {
1573		case MXT_GEN_MESSAGE_T5:
1574			if (data->info.family_id == 0x80 &&
1575			    data->info.version < 0x20) {
1576				/*
1577				 * On mXT224 firmware versions prior to V2.0
1578				 * read and discard unused CRC byte otherwise
1579				 * DMA reads are misaligned.
1580				 */
1581				data->T5_msg_size = mxt_obj_size(object);
1582			} else {
1583				/* CRC not enabled, so skip last byte */
1584				data->T5_msg_size = mxt_obj_size(object) - 1;
1585			}
1586			data->T5_address = object->start_address;
1587			break;
1588		case MXT_GEN_COMMAND_T6:
1589			data->T6_reportid = min_id;
1590			data->T6_address = object->start_address;
1591			break;
1592		case MXT_GEN_POWER_T7:
1593			data->T7_address = object->start_address;
1594			break;
1595		case MXT_TOUCH_MULTI_T9:
1596			data->multitouch = MXT_TOUCH_MULTI_T9;
1597			data->T9_reportid_min = min_id;
1598			data->T9_reportid_max = max_id;
1599			data->num_touchids = object->num_report_ids
1600						* mxt_obj_instances(object);
1601			break;
1602		case MXT_SPT_MESSAGECOUNT_T44:
1603			data->T44_address = object->start_address;
1604			break;
1605		case MXT_SPT_GPIOPWM_T19:
1606			data->T19_reportid = min_id;
1607			break;
1608		case MXT_TOUCH_MULTITOUCHSCREEN_T100:
1609			data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
1610			data->T100_reportid_min = min_id;
1611			data->T100_reportid_max = max_id;
1612			/* first two report IDs reserved */
1613			data->num_touchids = object->num_report_ids - 2;
1614			break;
1615		}
1616
1617		end_address = object->start_address
1618			+ mxt_obj_size(object) * mxt_obj_instances(object) - 1;
1619
1620		if (end_address >= data->mem_size)
1621			data->mem_size = end_address + 1;
1622	}
1623
1624	/* Store maximum reportid */
1625	data->max_reportid = reportid;
1626
1627	/* If T44 exists, T5 position has to be directly after */
1628	if (data->T44_address && (data->T5_address != data->T44_address + 1)) {
1629		dev_err(&client->dev, "Invalid T44 position\n");
1630		error = -EINVAL;
1631		goto free_object_table;
1632	}
1633
1634	data->msg_buf = kcalloc(data->max_reportid,
1635				data->T5_msg_size, GFP_KERNEL);
1636	if (!data->msg_buf) {
1637		dev_err(&client->dev, "Failed to allocate message buffer\n");
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1638		error = -ENOMEM;
1639		goto free_object_table;
1640	}
 
 
 
 
 
 
 
 
1641
1642	data->object_table = object_table;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1643
1644	return 0;
1645
1646free_object_table:
1647	mxt_free_object_table(data);
1648	return error;
1649}
1650
1651static int mxt_read_t9_resolution(struct mxt_data *data)
1652{
1653	struct i2c_client *client = data->client;
1654	int error;
1655	struct t9_range range;
1656	unsigned char orient;
1657	struct mxt_object *object;
1658
1659	object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
1660	if (!object)
1661		return -EINVAL;
1662
1663	error = __mxt_read_reg(client,
 
 
 
 
 
 
 
 
 
 
 
 
1664			       object->start_address + MXT_T9_RANGE,
1665			       sizeof(range), &range);
1666	if (error)
1667		return error;
1668
1669	data->max_x = get_unaligned_le16(&range.x);
1670	data->max_y = get_unaligned_le16(&range.y);
1671
1672	error =  __mxt_read_reg(client,
1673				object->start_address + MXT_T9_ORIENT,
1674				1, &orient);
1675	if (error)
1676		return error;
1677
1678	data->xy_switch = orient & MXT_T9_ORIENT_SWITCH;
 
 
1679
1680	return 0;
1681}
1682
1683static int mxt_read_t100_config(struct mxt_data *data)
1684{
1685	struct i2c_client *client = data->client;
1686	int error;
1687	struct mxt_object *object;
1688	u16 range_x, range_y;
1689	u8 cfg, tchaux;
1690	u8 aux;
1691
1692	object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
1693	if (!object)
1694		return -EINVAL;
1695
1696	/* read touchscreen dimensions */
1697	error = __mxt_read_reg(client,
1698			       object->start_address + MXT_T100_XRANGE,
1699			       sizeof(range_x), &range_x);
1700	if (error)
1701		return error;
1702
1703	data->max_x = get_unaligned_le16(&range_x);
1704
1705	error = __mxt_read_reg(client,
1706			       object->start_address + MXT_T100_YRANGE,
1707			       sizeof(range_y), &range_y);
1708	if (error)
1709		return error;
1710
1711	data->max_y = get_unaligned_le16(&range_y);
1712
 
 
 
 
 
 
 
 
 
 
 
 
1713	/* read orientation config */
1714	error =  __mxt_read_reg(client,
1715				object->start_address + MXT_T100_CFG1,
1716				1, &cfg);
1717	if (error)
1718		return error;
1719
1720	data->xy_switch = cfg & MXT_T100_CFG_SWITCHXY;
 
 
1721
1722	/* allocate aux bytes */
1723	error =  __mxt_read_reg(client,
1724				object->start_address + MXT_T100_TCHAUX,
1725				1, &tchaux);
1726	if (error)
1727		return error;
1728
1729	aux = 6;
1730
1731	if (tchaux & MXT_T100_TCHAUX_VECT)
1732		data->t100_aux_vect = aux++;
1733
1734	if (tchaux & MXT_T100_TCHAUX_AMPL)
1735		data->t100_aux_ampl = aux++;
1736
1737	if (tchaux & MXT_T100_TCHAUX_AREA)
1738		data->t100_aux_area = aux++;
1739
1740	dev_dbg(&client->dev,
1741		"T100 aux mappings vect:%u ampl:%u area:%u\n",
1742		data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area);
1743
1744	return 0;
1745}
1746
1747static int mxt_input_open(struct input_dev *dev);
1748static void mxt_input_close(struct input_dev *dev);
1749
1750static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
1751				   struct mxt_data *data)
1752{
1753	const struct mxt_platform_data *pdata = data->pdata;
1754	int i;
1755
1756	input_dev->name = "Atmel maXTouch Touchpad";
1757
1758	__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
1759
1760	input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
1761	input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
1762	input_abs_set_res(input_dev, ABS_MT_POSITION_X,
1763			  MXT_PIXELS_PER_MM);
1764	input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
1765			  MXT_PIXELS_PER_MM);
1766
1767	for (i = 0; i < pdata->t19_num_keys; i++)
1768		if (pdata->t19_keymap[i] != KEY_RESERVED)
1769			input_set_capability(input_dev, EV_KEY,
1770					     pdata->t19_keymap[i]);
1771}
1772
1773static int mxt_initialize_input_device(struct mxt_data *data)
1774{
1775	const struct mxt_platform_data *pdata = data->pdata;
1776	struct device *dev = &data->client->dev;
1777	struct input_dev *input_dev;
1778	int error;
1779	unsigned int num_mt_slots;
1780	unsigned int mt_flags = 0;
1781
1782	switch (data->multitouch) {
1783	case MXT_TOUCH_MULTI_T9:
1784		num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
1785		error = mxt_read_t9_resolution(data);
1786		if (error)
1787			dev_warn(dev, "Failed to initialize T9 resolution\n");
1788		break;
1789
1790	case MXT_TOUCH_MULTITOUCHSCREEN_T100:
1791		num_mt_slots = data->num_touchids;
1792		error = mxt_read_t100_config(data);
1793		if (error)
1794			dev_warn(dev, "Failed to read T100 config\n");
1795		break;
1796
1797	default:
1798		dev_err(dev, "Invalid multitouch object\n");
1799		return -EINVAL;
1800	}
1801
1802	/* Handle default values and orientation switch */
1803	if (data->max_x == 0)
1804		data->max_x = 1023;
1805
1806	if (data->max_y == 0)
1807		data->max_y = 1023;
1808
1809	if (data->xy_switch)
1810		swap(data->max_x, data->max_y);
1811
1812	dev_info(dev, "Touchscreen size X%uY%u\n", data->max_x, data->max_y);
1813
1814	/* Register input device */
1815	input_dev = input_allocate_device();
1816	if (!input_dev) {
1817		dev_err(dev, "Failed to allocate memory\n");
1818		return -ENOMEM;
1819	}
1820
1821	input_dev->name = "Atmel maXTouch Touchscreen";
1822	input_dev->phys = data->phys;
1823	input_dev->id.bustype = BUS_I2C;
1824	input_dev->dev.parent = dev;
1825	input_dev->open = mxt_input_open;
1826	input_dev->close = mxt_input_close;
1827
1828	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
1829
1830	/* For single touch */
1831	input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0);
1832	input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0);
1833
1834	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
1835	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
1836	     data->t100_aux_ampl)) {
1837		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
1838	}
1839
1840	/* If device has buttons we assume it is a touchpad */
1841	if (pdata->t19_num_keys) {
1842		mxt_set_up_as_touchpad(input_dev, data);
1843		mt_flags |= INPUT_MT_POINTER;
1844	} else {
1845		mt_flags |= INPUT_MT_DIRECT;
1846	}
1847
1848	/* For multi touch */
1849	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
1850	if (error) {
1851		dev_err(dev, "Error %d initialising slots\n", error);
1852		goto err_free_mem;
1853	}
1854
1855	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100) {
1856		input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
1857				     0, MT_TOOL_MAX, 0, 0);
1858		input_set_abs_params(input_dev, ABS_MT_DISTANCE,
1859				     MXT_DISTANCE_ACTIVE_TOUCH,
1860				     MXT_DISTANCE_HOVERING,
1861				     0, 0);
1862	}
1863
1864	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
1865			     0, data->max_x, 0, 0);
1866	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
1867			     0, data->max_y, 0, 0);
1868
1869	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
1870	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
1871	     data->t100_aux_area)) {
1872		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
1873				     0, MXT_MAX_AREA, 0, 0);
1874	}
1875
1876	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
1877	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
1878	     data->t100_aux_ampl)) {
1879		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
1880				     0, 255, 0, 0);
1881	}
1882
1883	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
1884	    data->t100_aux_vect) {
1885		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
1886				     0, 255, 0, 0);
1887	}
1888
1889	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
1890	    data->t100_aux_ampl) {
1891		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
1892				     0, 255, 0, 0);
1893	}
1894
1895	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
1896	    data->t100_aux_vect) {
1897		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
1898				     0, 255, 0, 0);
1899	}
1900
1901	input_set_drvdata(input_dev, data);
1902
1903	error = input_register_device(input_dev);
1904	if (error) {
1905		dev_err(dev, "Error %d registering input device\n", error);
1906		goto err_free_mem;
1907	}
1908
1909	data->input_dev = input_dev;
1910
1911	return 0;
1912
1913err_free_mem:
1914	input_free_device(input_dev);
1915	return error;
1916}
1917
1918static int mxt_configure_objects(struct mxt_data *data,
1919				 const struct firmware *cfg);
1920
1921static void mxt_config_cb(const struct firmware *cfg, void *ctx)
1922{
1923	mxt_configure_objects(ctx, cfg);
1924	release_firmware(cfg);
1925}
1926
1927static int mxt_initialize(struct mxt_data *data)
1928{
1929	struct i2c_client *client = data->client;
1930	int recovery_attempts = 0;
1931	int error;
1932
1933	while (1) {
1934		error = mxt_get_info(data);
1935		if (!error)
1936			break;
1937
1938		/* Check bootloader state */
1939		error = mxt_probe_bootloader(data, false);
1940		if (error) {
1941			dev_info(&client->dev, "Trying alternate bootloader address\n");
1942			error = mxt_probe_bootloader(data, true);
1943			if (error) {
1944				/* Chip is not in appmode or bootloader mode */
1945				return error;
1946			}
1947		}
1948
1949		/* OK, we are in bootloader, see if we can recover */
1950		if (++recovery_attempts > 1) {
1951			dev_err(&client->dev, "Could not recover from bootloader mode\n");
1952			/*
1953			 * We can reflash from this state, so do not
1954			 * abort initialization.
1955			 */
1956			data->in_bootloader = true;
1957			return 0;
1958		}
1959
1960		/* Attempt to exit bootloader into app mode */
1961		mxt_send_bootloader_cmd(data, false);
1962		msleep(MXT_FW_RESET_TIME);
1963	}
1964
1965	/* Get object table information */
1966	error = mxt_get_object_table(data);
1967	if (error) {
1968		dev_err(&client->dev, "Error %d reading object table\n", error);
1969		return error;
1970	}
1971
1972	error = mxt_acquire_irq(data);
1973	if (error)
1974		goto err_free_object_table;
1975
1976	error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
1977					&client->dev, GFP_KERNEL, data,
1978					mxt_config_cb);
1979	if (error) {
1980		dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
1981			error);
1982		goto err_free_object_table;
1983	}
1984
1985	return 0;
1986
1987err_free_object_table:
1988	mxt_free_object_table(data);
1989	return error;
1990}
1991
1992static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
1993{
1994	struct device *dev = &data->client->dev;
1995	int error;
1996	struct t7_config *new_config;
1997	struct t7_config deepsleep = { .active = 0, .idle = 0 };
1998
1999	if (sleep == MXT_POWER_CFG_DEEPSLEEP)
2000		new_config = &deepsleep;
2001	else
2002		new_config = &data->t7_cfg;
2003
2004	error = __mxt_write_reg(data->client, data->T7_address,
2005				sizeof(data->t7_cfg), new_config);
2006	if (error)
2007		return error;
2008
2009	dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n",
2010		new_config->active, new_config->idle);
2011
2012	return 0;
2013}
2014
2015static int mxt_init_t7_power_cfg(struct mxt_data *data)
2016{
2017	struct device *dev = &data->client->dev;
2018	int error;
2019	bool retry = false;
2020
2021recheck:
2022	error = __mxt_read_reg(data->client, data->T7_address,
2023				sizeof(data->t7_cfg), &data->t7_cfg);
2024	if (error)
2025		return error;
2026
2027	if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) {
2028		if (!retry) {
2029			dev_dbg(dev, "T7 cfg zero, resetting\n");
2030			mxt_soft_reset(data);
2031			retry = true;
2032			goto recheck;
2033		} else {
2034			dev_dbg(dev, "T7 cfg zero after reset, overriding\n");
2035			data->t7_cfg.active = 20;
2036			data->t7_cfg.idle = 100;
2037			return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
2038		}
2039	}
2040
2041	dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n",
2042		data->t7_cfg.active, data->t7_cfg.idle);
2043	return 0;
2044}
2045
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2046static int mxt_configure_objects(struct mxt_data *data,
2047				 const struct firmware *cfg)
2048{
2049	struct device *dev = &data->client->dev;
2050	struct mxt_info *info = &data->info;
2051	int error;
2052
2053	error = mxt_init_t7_power_cfg(data);
2054	if (error) {
2055		dev_err(dev, "Failed to initialize power cfg\n");
2056		return error;
2057	}
2058
2059	if (cfg) {
2060		error = mxt_update_cfg(data, cfg);
2061		if (error)
2062			dev_warn(dev, "Error %d updating config\n", error);
2063	}
2064
2065	if (data->multitouch) {
2066		error = mxt_initialize_input_device(data);
2067		if (error)
2068			return error;
2069	} else {
2070		dev_warn(dev, "No touch object detected\n");
2071	}
2072
2073	dev_info(dev,
2074		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
2075		 info->family_id, info->variant_id, info->version >> 4,
2076		 info->version & 0xf, info->build, info->object_num);
2077
2078	return 0;
2079}
2080
2081/* Firmware Version is returned as Major.Minor.Build */
2082static ssize_t mxt_fw_version_show(struct device *dev,
2083				   struct device_attribute *attr, char *buf)
2084{
2085	struct mxt_data *data = dev_get_drvdata(dev);
2086	struct mxt_info *info = &data->info;
2087	return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
2088			 info->version >> 4, info->version & 0xf, info->build);
2089}
2090
2091/* Hardware Version is returned as FamilyID.VariantID */
2092static ssize_t mxt_hw_version_show(struct device *dev,
2093				   struct device_attribute *attr, char *buf)
2094{
2095	struct mxt_data *data = dev_get_drvdata(dev);
2096	struct mxt_info *info = &data->info;
2097	return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
2098			 info->family_id, info->variant_id);
2099}
2100
2101static ssize_t mxt_show_instance(char *buf, int count,
2102				 struct mxt_object *object, int instance,
2103				 const u8 *val)
2104{
2105	int i;
2106
2107	if (mxt_obj_instances(object) > 1)
2108		count += scnprintf(buf + count, PAGE_SIZE - count,
2109				   "Instance %u\n", instance);
2110
2111	for (i = 0; i < mxt_obj_size(object); i++)
2112		count += scnprintf(buf + count, PAGE_SIZE - count,
2113				"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
2114	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
2115
2116	return count;
2117}
2118
2119static ssize_t mxt_object_show(struct device *dev,
2120				    struct device_attribute *attr, char *buf)
2121{
2122	struct mxt_data *data = dev_get_drvdata(dev);
2123	struct mxt_object *object;
2124	int count = 0;
2125	int i, j;
2126	int error;
2127	u8 *obuf;
2128
2129	/* Pre-allocate buffer large enough to hold max sized object. */
2130	obuf = kmalloc(256, GFP_KERNEL);
2131	if (!obuf)
2132		return -ENOMEM;
2133
2134	error = 0;
2135	for (i = 0; i < data->info.object_num; i++) {
2136		object = data->object_table + i;
2137
2138		if (!mxt_object_readable(object->type))
2139			continue;
2140
2141		count += scnprintf(buf + count, PAGE_SIZE - count,
2142				"T%u:\n", object->type);
2143
2144		for (j = 0; j < mxt_obj_instances(object); j++) {
2145			u16 size = mxt_obj_size(object);
2146			u16 addr = object->start_address + j * size;
2147
2148			error = __mxt_read_reg(data->client, addr, size, obuf);
2149			if (error)
2150				goto done;
2151
2152			count = mxt_show_instance(buf, count, object, j, obuf);
2153		}
2154	}
2155
2156done:
2157	kfree(obuf);
2158	return error ?: count;
2159}
2160
2161static int mxt_check_firmware_format(struct device *dev,
2162				     const struct firmware *fw)
2163{
2164	unsigned int pos = 0;
2165	char c;
2166
2167	while (pos < fw->size) {
2168		c = *(fw->data + pos);
2169
2170		if (c < '0' || (c > '9' && c < 'A') || c > 'F')
2171			return 0;
2172
2173		pos++;
2174	}
2175
2176	/*
2177	 * To convert file try:
2178	 * xxd -r -p mXTXXX__APP_VX-X-XX.enc > maxtouch.fw
2179	 */
2180	dev_err(dev, "Aborting: firmware file must be in binary format\n");
2181
2182	return -EINVAL;
2183}
2184
2185static int mxt_load_fw(struct device *dev, const char *fn)
2186{
2187	struct mxt_data *data = dev_get_drvdata(dev);
2188	const struct firmware *fw = NULL;
2189	unsigned int frame_size;
2190	unsigned int pos = 0;
2191	unsigned int retry = 0;
2192	unsigned int frame = 0;
2193	int ret;
2194
2195	ret = request_firmware(&fw, fn, dev);
2196	if (ret) {
2197		dev_err(dev, "Unable to open firmware %s\n", fn);
2198		return ret;
2199	}
2200
2201	/* Check for incorrect enc file */
2202	ret = mxt_check_firmware_format(dev, fw);
2203	if (ret)
2204		goto release_firmware;
2205
2206	if (!data->in_bootloader) {
2207		/* Change to the bootloader mode */
2208		data->in_bootloader = true;
2209
2210		ret = mxt_t6_command(data, MXT_COMMAND_RESET,
2211				     MXT_BOOT_VALUE, false);
2212		if (ret)
2213			goto release_firmware;
2214
2215		msleep(MXT_RESET_TIME);
2216
2217		/* Do not need to scan since we know family ID */
2218		ret = mxt_lookup_bootloader_address(data, 0);
2219		if (ret)
2220			goto release_firmware;
2221
2222		mxt_free_input_device(data);
2223		mxt_free_object_table(data);
2224	} else {
2225		enable_irq(data->irq);
2226	}
2227
2228	reinit_completion(&data->bl_completion);
2229
2230	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
2231	if (ret) {
2232		/* Bootloader may still be unlocked from previous attempt */
2233		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
2234		if (ret)
2235			goto disable_irq;
2236	} else {
2237		dev_info(dev, "Unlocking bootloader\n");
2238
2239		/* Unlock bootloader */
2240		ret = mxt_send_bootloader_cmd(data, true);
2241		if (ret)
2242			goto disable_irq;
2243	}
2244
2245	while (pos < fw->size) {
2246		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
2247		if (ret)
2248			goto disable_irq;
2249
2250		frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
2251
2252		/* Take account of CRC bytes */
2253		frame_size += 2;
2254
2255		/* Write one frame to device */
2256		ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
2257		if (ret)
2258			goto disable_irq;
2259
2260		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
2261		if (ret) {
2262			retry++;
2263
2264			/* Back off by 20ms per retry */
2265			msleep(retry * 20);
2266
2267			if (retry > 20) {
2268				dev_err(dev, "Retry count exceeded\n");
2269				goto disable_irq;
2270			}
2271		} else {
2272			retry = 0;
2273			pos += frame_size;
2274			frame++;
2275		}
2276
2277		if (frame % 50 == 0)
2278			dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
2279				frame, pos, fw->size);
2280	}
2281
2282	/* Wait for flash. */
2283	ret = mxt_wait_for_completion(data, &data->bl_completion,
2284				      MXT_FW_RESET_TIME);
2285	if (ret)
2286		goto disable_irq;
2287
2288	dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
2289
2290	/*
2291	 * Wait for device to reset. Some bootloader versions do not assert
2292	 * the CHG line after bootloading has finished, so ignore potential
2293	 * errors.
2294	 */
2295	mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
2296
2297	data->in_bootloader = false;
2298
2299disable_irq:
2300	disable_irq(data->irq);
2301release_firmware:
2302	release_firmware(fw);
2303	return ret;
2304}
2305
2306static ssize_t mxt_update_fw_store(struct device *dev,
2307					struct device_attribute *attr,
2308					const char *buf, size_t count)
2309{
2310	struct mxt_data *data = dev_get_drvdata(dev);
2311	int error;
2312
2313	error = mxt_load_fw(dev, MXT_FW_NAME);
2314	if (error) {
2315		dev_err(dev, "The firmware update failed(%d)\n", error);
2316		count = error;
2317	} else {
2318		dev_info(dev, "The firmware update succeeded\n");
2319
2320		error = mxt_initialize(data);
2321		if (error)
2322			return error;
2323	}
2324
2325	return count;
2326}
2327
2328static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
2329static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
2330static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
2331static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
2332
2333static struct attribute *mxt_attrs[] = {
2334	&dev_attr_fw_version.attr,
2335	&dev_attr_hw_version.attr,
2336	&dev_attr_object.attr,
2337	&dev_attr_update_fw.attr,
2338	NULL
2339};
2340
2341static const struct attribute_group mxt_attr_group = {
2342	.attrs = mxt_attrs,
2343};
2344
2345static void mxt_start(struct mxt_data *data)
2346{
2347	switch (data->pdata->suspend_mode) {
2348	case MXT_SUSPEND_T9_CTRL:
2349		mxt_soft_reset(data);
2350
2351		/* Touch enable */
2352		/* 0x83 = SCANEN | RPTEN | ENABLE */
2353		mxt_write_object(data,
2354				MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
2355		break;
2356
2357	case MXT_SUSPEND_DEEP_SLEEP:
2358	default:
2359		mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
2360
2361		/* Recalibrate since chip has been in deep sleep */
2362		mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
2363		break;
2364	}
2365
2366}
2367
2368static void mxt_stop(struct mxt_data *data)
2369{
2370	switch (data->pdata->suspend_mode) {
2371	case MXT_SUSPEND_T9_CTRL:
2372		/* Touch disable */
2373		mxt_write_object(data,
2374				MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
2375		break;
2376
2377	case MXT_SUSPEND_DEEP_SLEEP:
2378	default:
2379		mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
2380		break;
2381	}
2382}
2383
2384static int mxt_input_open(struct input_dev *dev)
2385{
2386	struct mxt_data *data = input_get_drvdata(dev);
2387
2388	mxt_start(data);
2389
2390	return 0;
2391}
2392
2393static void mxt_input_close(struct input_dev *dev)
2394{
2395	struct mxt_data *data = input_get_drvdata(dev);
2396
2397	mxt_stop(data);
2398}
2399
2400#ifdef CONFIG_OF
2401static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
2402{
2403	struct mxt_platform_data *pdata;
2404	struct device_node *np = client->dev.of_node;
2405	u32 *keymap;
2406	int proplen, ret;
2407
2408	if (!np)
2409		return ERR_PTR(-ENOENT);
2410
2411	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
2412	if (!pdata)
2413		return ERR_PTR(-ENOMEM);
2414
2415	if (of_find_property(np, "linux,gpio-keymap", &proplen)) {
2416		pdata->t19_num_keys = proplen / sizeof(u32);
 
 
 
 
 
 
 
2417
2418		keymap = devm_kzalloc(&client->dev,
2419				pdata->t19_num_keys * sizeof(keymap[0]),
2420				GFP_KERNEL);
2421		if (!keymap)
2422			return ERR_PTR(-ENOMEM);
2423
2424		ret = of_property_read_u32_array(np, "linux,gpio-keymap",
2425						 keymap, pdata->t19_num_keys);
2426		if (ret)
2427			dev_warn(&client->dev,
2428				 "Couldn't read linux,gpio-keymap: %d\n", ret);
 
 
2429
2430		pdata->t19_keymap = keymap;
 
2431	}
2432
2433	pdata->suspend_mode = MXT_SUSPEND_DEEP_SLEEP;
2434
2435	return pdata;
2436}
2437#else
2438static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
2439{
2440	return ERR_PTR(-ENOENT);
2441}
2442#endif
2443
2444#ifdef CONFIG_ACPI
2445
2446struct mxt_acpi_platform_data {
2447	const char *hid;
2448	struct mxt_platform_data pdata;
2449};
2450
2451static unsigned int samus_touchpad_buttons[] = {
2452	KEY_RESERVED,
2453	KEY_RESERVED,
2454	KEY_RESERVED,
2455	BTN_LEFT
2456};
2457
 
 
 
 
 
2458static struct mxt_acpi_platform_data samus_platform_data[] = {
2459	{
2460		/* Touchpad */
2461		.hid	= "ATML0000",
2462		.pdata	= {
2463			.t19_num_keys	= ARRAY_SIZE(samus_touchpad_buttons),
2464			.t19_keymap	= samus_touchpad_buttons,
2465		},
2466	},
2467	{
2468		/* Touchscreen */
2469		.hid	= "ATML0001",
2470	},
2471	{ }
2472};
2473
2474static unsigned int chromebook_tp_buttons[] = {
2475	KEY_RESERVED,
2476	KEY_RESERVED,
2477	KEY_RESERVED,
2478	KEY_RESERVED,
2479	KEY_RESERVED,
2480	BTN_LEFT
2481};
2482
 
 
 
 
 
2483static struct mxt_acpi_platform_data chromebook_platform_data[] = {
2484	{
2485		/* Touchpad */
2486		.hid	= "ATML0000",
2487		.pdata	= {
2488			.t19_num_keys	= ARRAY_SIZE(chromebook_tp_buttons),
2489			.t19_keymap	= chromebook_tp_buttons,
2490		},
2491	},
2492	{
2493		/* Touchscreen */
2494		.hid	= "ATML0001",
2495	},
2496	{ }
2497};
2498
2499static const struct dmi_system_id mxt_dmi_table[] = {
2500	{
2501		/* 2015 Google Pixel */
2502		.ident = "Chromebook Pixel 2",
2503		.matches = {
2504			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
2505			DMI_MATCH(DMI_PRODUCT_NAME, "Samus"),
2506		},
2507		.driver_data = samus_platform_data,
2508	},
2509	{
 
 
 
 
 
 
 
 
 
2510		/* Other Google Chromebooks */
2511		.ident = "Chromebook",
2512		.matches = {
2513			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
2514		},
2515		.driver_data = chromebook_platform_data,
2516	},
2517	{ }
2518};
2519
2520static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
2521{
2522	struct acpi_device *adev;
2523	const struct dmi_system_id *system_id;
2524	const struct mxt_acpi_platform_data *acpi_pdata;
2525
2526	/*
2527	 * Ignore ACPI devices representing bootloader mode.
2528	 *
2529	 * This is a bit of a hack: Google Chromebook BIOS creates ACPI
2530	 * devices for both application and bootloader modes, but we are
2531	 * interested in application mode only (if device is in bootloader
2532	 * mode we'll end up switching into application anyway). So far
2533	 * application mode addresses were all above 0x40, so we'll use it
2534	 * as a threshold.
2535	 */
2536	if (client->addr < 0x40)
2537		return ERR_PTR(-ENXIO);
2538
2539	adev = ACPI_COMPANION(&client->dev);
2540	if (!adev)
2541		return ERR_PTR(-ENOENT);
2542
2543	system_id = dmi_first_match(mxt_dmi_table);
2544	if (!system_id)
2545		return ERR_PTR(-ENOENT);
2546
2547	acpi_pdata = system_id->driver_data;
2548	if (!acpi_pdata)
2549		return ERR_PTR(-ENOENT);
2550
2551	while (acpi_pdata->hid) {
2552		if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid))
2553			return &acpi_pdata->pdata;
 
 
 
 
 
 
 
 
 
 
 
 
 
2554
2555		acpi_pdata++;
2556	}
2557
2558	return ERR_PTR(-ENOENT);
2559}
2560#else
2561static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
2562{
2563	return ERR_PTR(-ENOENT);
2564}
2565#endif
2566
2567static const struct mxt_platform_data *
2568mxt_get_platform_data(struct i2c_client *client)
2569{
2570	const struct mxt_platform_data *pdata;
2571
2572	pdata = dev_get_platdata(&client->dev);
2573	if (pdata)
2574		return pdata;
2575
2576	pdata = mxt_parse_dt(client);
2577	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
2578		return pdata;
2579
2580	pdata = mxt_parse_acpi(client);
2581	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
2582		return pdata;
2583
2584	dev_err(&client->dev, "No platform data specified\n");
2585	return ERR_PTR(-EINVAL);
2586}
2587
2588static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
2589{
2590	struct mxt_data *data;
2591	const struct mxt_platform_data *pdata;
2592	int error;
2593
2594	pdata = mxt_get_platform_data(client);
2595	if (IS_ERR(pdata))
2596		return PTR_ERR(pdata);
2597
2598	data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
2599	if (!data) {
2600		dev_err(&client->dev, "Failed to allocate memory\n");
 
 
 
 
 
 
 
 
2601		return -ENOMEM;
2602	}
2603
2604	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
2605		 client->adapter->nr, client->addr);
2606
2607	data->client = client;
2608	data->pdata = pdata;
2609	data->irq = client->irq;
2610	i2c_set_clientdata(client, data);
2611
2612	init_completion(&data->bl_completion);
2613	init_completion(&data->reset_completion);
2614	init_completion(&data->crc_completion);
2615
2616	error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
2617				     pdata->irqflags | IRQF_ONESHOT,
2618				     client->name, data);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2619	if (error) {
2620		dev_err(&client->dev, "Failed to register interrupt\n");
2621		goto err_free_mem;
 
 
 
 
 
 
 
 
 
 
 
 
2622	}
2623
2624	disable_irq(client->irq);
2625
2626	error = mxt_initialize(data);
2627	if (error)
2628		goto err_free_irq;
2629
2630	error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
2631	if (error) {
2632		dev_err(&client->dev, "Failure %d creating sysfs group\n",
2633			error);
2634		goto err_free_object;
2635	}
2636
2637	return 0;
2638
2639err_free_object:
2640	mxt_free_input_device(data);
2641	mxt_free_object_table(data);
2642err_free_irq:
2643	free_irq(client->irq, data);
2644err_free_mem:
2645	kfree(data);
2646	return error;
2647}
2648
2649static int mxt_remove(struct i2c_client *client)
2650{
2651	struct mxt_data *data = i2c_get_clientdata(client);
2652
 
2653	sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
2654	free_irq(data->irq, data);
2655	mxt_free_input_device(data);
2656	mxt_free_object_table(data);
2657	kfree(data);
2658
2659	return 0;
2660}
2661
2662static int __maybe_unused mxt_suspend(struct device *dev)
2663{
2664	struct i2c_client *client = to_i2c_client(dev);
2665	struct mxt_data *data = i2c_get_clientdata(client);
2666	struct input_dev *input_dev = data->input_dev;
2667
2668	if (!input_dev)
2669		return 0;
2670
2671	mutex_lock(&input_dev->mutex);
2672
2673	if (input_dev->users)
2674		mxt_stop(data);
2675
2676	mutex_unlock(&input_dev->mutex);
2677
2678	return 0;
2679}
2680
2681static int __maybe_unused mxt_resume(struct device *dev)
2682{
2683	struct i2c_client *client = to_i2c_client(dev);
2684	struct mxt_data *data = i2c_get_clientdata(client);
2685	struct input_dev *input_dev = data->input_dev;
2686
2687	if (!input_dev)
2688		return 0;
2689
2690	mutex_lock(&input_dev->mutex);
2691
2692	if (input_dev->users)
2693		mxt_start(data);
2694
2695	mutex_unlock(&input_dev->mutex);
2696
2697	return 0;
2698}
2699
2700static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
2701
2702static const struct of_device_id mxt_of_match[] = {
2703	{ .compatible = "atmel,maxtouch", },
 
 
 
 
 
2704	{},
2705};
2706MODULE_DEVICE_TABLE(of, mxt_of_match);
2707
2708#ifdef CONFIG_ACPI
2709static const struct acpi_device_id mxt_acpi_id[] = {
2710	{ "ATML0000", 0 },	/* Touchpad */
2711	{ "ATML0001", 0 },	/* Touchscreen */
2712	{ }
2713};
2714MODULE_DEVICE_TABLE(acpi, mxt_acpi_id);
2715#endif
2716
2717static const struct i2c_device_id mxt_id[] = {
2718	{ "qt602240_ts", 0 },
2719	{ "atmel_mxt_ts", 0 },
2720	{ "atmel_mxt_tp", 0 },
2721	{ "maxtouch", 0 },
2722	{ "mXT224", 0 },
2723	{ }
2724};
2725MODULE_DEVICE_TABLE(i2c, mxt_id);
2726
2727static struct i2c_driver mxt_driver = {
2728	.driver = {
2729		.name	= "atmel_mxt_ts",
2730		.of_match_table = of_match_ptr(mxt_of_match),
2731		.acpi_match_table = ACPI_PTR(mxt_acpi_id),
2732		.pm	= &mxt_pm_ops,
2733	},
2734	.probe		= mxt_probe,
2735	.remove		= mxt_remove,
2736	.id_table	= mxt_id,
2737};
2738
2739module_i2c_driver(mxt_driver);
2740
2741/* Module information */
2742MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
2743MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
2744MODULE_LICENSE("GPL");