Loading...
1/*
2 * ati_remote2 - ATI/Philips USB RF remote driver
3 *
4 * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
5 * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2
9 * as published by the Free Software Foundation.
10 */
11
12#include <linux/usb/input.h>
13#include <linux/slab.h>
14#include <linux/module.h>
15
16#define DRIVER_DESC "ATI/Philips USB RF remote driver"
17#define DRIVER_VERSION "0.3"
18
19MODULE_DESCRIPTION(DRIVER_DESC);
20MODULE_VERSION(DRIVER_VERSION);
21MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
22MODULE_LICENSE("GPL");
23
24/*
25 * ATI Remote Wonder II Channel Configuration
26 *
27 * The remote control can by assigned one of sixteen "channels" in order to facilitate
28 * the use of multiple remote controls within range of each other.
29 * A remote's "channel" may be altered by pressing and holding the "PC" button for
30 * approximately 3 seconds, after which the button will slowly flash the count of the
31 * currently configured "channel", using the numeric keypad enter a number between 1 and
32 * 16 and then press the "PC" button again, the button will slowly flash the count of the
33 * newly configured "channel".
34 */
35
36enum {
37 ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF,
38 ATI_REMOTE2_MAX_MODE_MASK = 0x1F,
39};
40
41static int ati_remote2_set_mask(const char *val,
42 const struct kernel_param *kp,
43 unsigned int max)
44{
45 unsigned int mask;
46 int ret;
47
48 if (!val)
49 return -EINVAL;
50
51 ret = kstrtouint(val, 0, &mask);
52 if (ret)
53 return ret;
54
55 if (mask & ~max)
56 return -EINVAL;
57
58 *(unsigned int *)kp->arg = mask;
59
60 return 0;
61}
62
63static int ati_remote2_set_channel_mask(const char *val,
64 const struct kernel_param *kp)
65{
66 pr_debug("%s()\n", __func__);
67
68 return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
69}
70
71static int ati_remote2_get_channel_mask(char *buffer,
72 const struct kernel_param *kp)
73{
74 pr_debug("%s()\n", __func__);
75
76 return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg);
77}
78
79static int ati_remote2_set_mode_mask(const char *val,
80 const struct kernel_param *kp)
81{
82 pr_debug("%s()\n", __func__);
83
84 return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
85}
86
87static int ati_remote2_get_mode_mask(char *buffer,
88 const struct kernel_param *kp)
89{
90 pr_debug("%s()\n", __func__);
91
92 return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg);
93}
94
95static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
96#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
97static const struct kernel_param_ops param_ops_channel_mask = {
98 .set = ati_remote2_set_channel_mask,
99 .get = ati_remote2_get_channel_mask,
100};
101module_param(channel_mask, channel_mask, 0644);
102MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
103
104static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
105#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
106static const struct kernel_param_ops param_ops_mode_mask = {
107 .set = ati_remote2_set_mode_mask,
108 .get = ati_remote2_get_mode_mask,
109};
110module_param(mode_mask, mode_mask, 0644);
111MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
112
113static struct usb_device_id ati_remote2_id_table[] = {
114 { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
115 { }
116};
117MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
118
119static DEFINE_MUTEX(ati_remote2_mutex);
120
121enum {
122 ATI_REMOTE2_OPENED = 0x1,
123 ATI_REMOTE2_SUSPENDED = 0x2,
124};
125
126enum {
127 ATI_REMOTE2_AUX1,
128 ATI_REMOTE2_AUX2,
129 ATI_REMOTE2_AUX3,
130 ATI_REMOTE2_AUX4,
131 ATI_REMOTE2_PC,
132 ATI_REMOTE2_MODES,
133};
134
135static const struct {
136 u8 hw_code;
137 u16 keycode;
138} ati_remote2_key_table[] = {
139 { 0x00, KEY_0 },
140 { 0x01, KEY_1 },
141 { 0x02, KEY_2 },
142 { 0x03, KEY_3 },
143 { 0x04, KEY_4 },
144 { 0x05, KEY_5 },
145 { 0x06, KEY_6 },
146 { 0x07, KEY_7 },
147 { 0x08, KEY_8 },
148 { 0x09, KEY_9 },
149 { 0x0c, KEY_POWER },
150 { 0x0d, KEY_MUTE },
151 { 0x10, KEY_VOLUMEUP },
152 { 0x11, KEY_VOLUMEDOWN },
153 { 0x20, KEY_CHANNELUP },
154 { 0x21, KEY_CHANNELDOWN },
155 { 0x28, KEY_FORWARD },
156 { 0x29, KEY_REWIND },
157 { 0x2c, KEY_PLAY },
158 { 0x30, KEY_PAUSE },
159 { 0x31, KEY_STOP },
160 { 0x37, KEY_RECORD },
161 { 0x38, KEY_DVD },
162 { 0x39, KEY_TV },
163 { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
164 { 0x54, KEY_MENU },
165 { 0x58, KEY_UP },
166 { 0x59, KEY_DOWN },
167 { 0x5a, KEY_LEFT },
168 { 0x5b, KEY_RIGHT },
169 { 0x5c, KEY_OK },
170 { 0x78, KEY_A },
171 { 0x79, KEY_B },
172 { 0x7a, KEY_C },
173 { 0x7b, KEY_D },
174 { 0x7c, KEY_E },
175 { 0x7d, KEY_F },
176 { 0x82, KEY_ENTER },
177 { 0x8e, KEY_VENDOR },
178 { 0x96, KEY_COFFEE },
179 { 0xa9, BTN_LEFT },
180 { 0xaa, BTN_RIGHT },
181 { 0xbe, KEY_QUESTION },
182 { 0xd0, KEY_EDIT },
183 { 0xd5, KEY_FRONT },
184 { 0xf9, KEY_INFO },
185};
186
187struct ati_remote2 {
188 struct input_dev *idev;
189 struct usb_device *udev;
190
191 struct usb_interface *intf[2];
192 struct usb_endpoint_descriptor *ep[2];
193 struct urb *urb[2];
194 void *buf[2];
195 dma_addr_t buf_dma[2];
196
197 unsigned long jiffies;
198 int mode;
199
200 char name[64];
201 char phys[64];
202
203 /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
204 u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
205
206 unsigned int flags;
207
208 unsigned int channel_mask;
209 unsigned int mode_mask;
210};
211
212static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
213static void ati_remote2_disconnect(struct usb_interface *interface);
214static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
215static int ati_remote2_resume(struct usb_interface *interface);
216static int ati_remote2_reset_resume(struct usb_interface *interface);
217static int ati_remote2_pre_reset(struct usb_interface *interface);
218static int ati_remote2_post_reset(struct usb_interface *interface);
219
220static struct usb_driver ati_remote2_driver = {
221 .name = "ati_remote2",
222 .probe = ati_remote2_probe,
223 .disconnect = ati_remote2_disconnect,
224 .id_table = ati_remote2_id_table,
225 .suspend = ati_remote2_suspend,
226 .resume = ati_remote2_resume,
227 .reset_resume = ati_remote2_reset_resume,
228 .pre_reset = ati_remote2_pre_reset,
229 .post_reset = ati_remote2_post_reset,
230 .supports_autosuspend = 1,
231};
232
233static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
234{
235 int r;
236
237 r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
238 if (r) {
239 dev_err(&ar2->intf[0]->dev,
240 "%s(): usb_submit_urb() = %d\n", __func__, r);
241 return r;
242 }
243 r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
244 if (r) {
245 usb_kill_urb(ar2->urb[0]);
246 dev_err(&ar2->intf[1]->dev,
247 "%s(): usb_submit_urb() = %d\n", __func__, r);
248 return r;
249 }
250
251 return 0;
252}
253
254static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
255{
256 usb_kill_urb(ar2->urb[1]);
257 usb_kill_urb(ar2->urb[0]);
258}
259
260static int ati_remote2_open(struct input_dev *idev)
261{
262 struct ati_remote2 *ar2 = input_get_drvdata(idev);
263 int r;
264
265 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
266
267 r = usb_autopm_get_interface(ar2->intf[0]);
268 if (r) {
269 dev_err(&ar2->intf[0]->dev,
270 "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
271 goto fail1;
272 }
273
274 mutex_lock(&ati_remote2_mutex);
275
276 if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
277 r = ati_remote2_submit_urbs(ar2);
278 if (r)
279 goto fail2;
280 }
281
282 ar2->flags |= ATI_REMOTE2_OPENED;
283
284 mutex_unlock(&ati_remote2_mutex);
285
286 usb_autopm_put_interface(ar2->intf[0]);
287
288 return 0;
289
290 fail2:
291 mutex_unlock(&ati_remote2_mutex);
292 usb_autopm_put_interface(ar2->intf[0]);
293 fail1:
294 return r;
295}
296
297static void ati_remote2_close(struct input_dev *idev)
298{
299 struct ati_remote2 *ar2 = input_get_drvdata(idev);
300
301 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
302
303 mutex_lock(&ati_remote2_mutex);
304
305 if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
306 ati_remote2_kill_urbs(ar2);
307
308 ar2->flags &= ~ATI_REMOTE2_OPENED;
309
310 mutex_unlock(&ati_remote2_mutex);
311}
312
313static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
314{
315 struct input_dev *idev = ar2->idev;
316 u8 *data = ar2->buf[0];
317 int channel, mode;
318
319 channel = data[0] >> 4;
320
321 if (!((1 << channel) & ar2->channel_mask))
322 return;
323
324 mode = data[0] & 0x0F;
325
326 if (mode > ATI_REMOTE2_PC) {
327 dev_err(&ar2->intf[0]->dev,
328 "Unknown mode byte (%02x %02x %02x %02x)\n",
329 data[3], data[2], data[1], data[0]);
330 return;
331 }
332
333 if (!((1 << mode) & ar2->mode_mask))
334 return;
335
336 input_event(idev, EV_REL, REL_X, (s8) data[1]);
337 input_event(idev, EV_REL, REL_Y, (s8) data[2]);
338 input_sync(idev);
339}
340
341static int ati_remote2_lookup(unsigned int hw_code)
342{
343 int i;
344
345 for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
346 if (ati_remote2_key_table[i].hw_code == hw_code)
347 return i;
348
349 return -1;
350}
351
352static void ati_remote2_input_key(struct ati_remote2 *ar2)
353{
354 struct input_dev *idev = ar2->idev;
355 u8 *data = ar2->buf[1];
356 int channel, mode, hw_code, index;
357
358 channel = data[0] >> 4;
359
360 if (!((1 << channel) & ar2->channel_mask))
361 return;
362
363 mode = data[0] & 0x0F;
364
365 if (mode > ATI_REMOTE2_PC) {
366 dev_err(&ar2->intf[1]->dev,
367 "Unknown mode byte (%02x %02x %02x %02x)\n",
368 data[3], data[2], data[1], data[0]);
369 return;
370 }
371
372 hw_code = data[2];
373 if (hw_code == 0x3f) {
374 /*
375 * For some incomprehensible reason the mouse pad generates
376 * events which look identical to the events from the last
377 * pressed mode key. Naturally we don't want to generate key
378 * events for the mouse pad so we filter out any subsequent
379 * events from the same mode key.
380 */
381 if (ar2->mode == mode)
382 return;
383
384 if (data[1] == 0)
385 ar2->mode = mode;
386 }
387
388 if (!((1 << mode) & ar2->mode_mask))
389 return;
390
391 index = ati_remote2_lookup(hw_code);
392 if (index < 0) {
393 dev_err(&ar2->intf[1]->dev,
394 "Unknown code byte (%02x %02x %02x %02x)\n",
395 data[3], data[2], data[1], data[0]);
396 return;
397 }
398
399 switch (data[1]) {
400 case 0: /* release */
401 break;
402 case 1: /* press */
403 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
404 break;
405 case 2: /* repeat */
406
407 /* No repeat for mouse buttons. */
408 if (ar2->keycode[mode][index] == BTN_LEFT ||
409 ar2->keycode[mode][index] == BTN_RIGHT)
410 return;
411
412 if (!time_after_eq(jiffies, ar2->jiffies))
413 return;
414
415 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
416 break;
417 default:
418 dev_err(&ar2->intf[1]->dev,
419 "Unknown state byte (%02x %02x %02x %02x)\n",
420 data[3], data[2], data[1], data[0]);
421 return;
422 }
423
424 input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
425 input_sync(idev);
426}
427
428static void ati_remote2_complete_mouse(struct urb *urb)
429{
430 struct ati_remote2 *ar2 = urb->context;
431 int r;
432
433 switch (urb->status) {
434 case 0:
435 usb_mark_last_busy(ar2->udev);
436 ati_remote2_input_mouse(ar2);
437 break;
438 case -ENOENT:
439 case -EILSEQ:
440 case -ECONNRESET:
441 case -ESHUTDOWN:
442 dev_dbg(&ar2->intf[0]->dev,
443 "%s(): urb status = %d\n", __func__, urb->status);
444 return;
445 default:
446 usb_mark_last_busy(ar2->udev);
447 dev_err(&ar2->intf[0]->dev,
448 "%s(): urb status = %d\n", __func__, urb->status);
449 }
450
451 r = usb_submit_urb(urb, GFP_ATOMIC);
452 if (r)
453 dev_err(&ar2->intf[0]->dev,
454 "%s(): usb_submit_urb() = %d\n", __func__, r);
455}
456
457static void ati_remote2_complete_key(struct urb *urb)
458{
459 struct ati_remote2 *ar2 = urb->context;
460 int r;
461
462 switch (urb->status) {
463 case 0:
464 usb_mark_last_busy(ar2->udev);
465 ati_remote2_input_key(ar2);
466 break;
467 case -ENOENT:
468 case -EILSEQ:
469 case -ECONNRESET:
470 case -ESHUTDOWN:
471 dev_dbg(&ar2->intf[1]->dev,
472 "%s(): urb status = %d\n", __func__, urb->status);
473 return;
474 default:
475 usb_mark_last_busy(ar2->udev);
476 dev_err(&ar2->intf[1]->dev,
477 "%s(): urb status = %d\n", __func__, urb->status);
478 }
479
480 r = usb_submit_urb(urb, GFP_ATOMIC);
481 if (r)
482 dev_err(&ar2->intf[1]->dev,
483 "%s(): usb_submit_urb() = %d\n", __func__, r);
484}
485
486static int ati_remote2_getkeycode(struct input_dev *idev,
487 struct input_keymap_entry *ke)
488{
489 struct ati_remote2 *ar2 = input_get_drvdata(idev);
490 unsigned int mode;
491 int offset;
492 unsigned int index;
493 unsigned int scancode;
494
495 if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
496 index = ke->index;
497 if (index >= ATI_REMOTE2_MODES *
498 ARRAY_SIZE(ati_remote2_key_table))
499 return -EINVAL;
500
501 mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
502 offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
503 scancode = (mode << 8) + ati_remote2_key_table[offset].hw_code;
504 } else {
505 if (input_scancode_to_scalar(ke, &scancode))
506 return -EINVAL;
507
508 mode = scancode >> 8;
509 if (mode > ATI_REMOTE2_PC)
510 return -EINVAL;
511
512 offset = ati_remote2_lookup(scancode & 0xff);
513 if (offset < 0)
514 return -EINVAL;
515
516 index = mode * ARRAY_SIZE(ati_remote2_key_table) + offset;
517 }
518
519 ke->keycode = ar2->keycode[mode][offset];
520 ke->len = sizeof(scancode);
521 memcpy(&ke->scancode, &scancode, sizeof(scancode));
522 ke->index = index;
523
524 return 0;
525}
526
527static int ati_remote2_setkeycode(struct input_dev *idev,
528 const struct input_keymap_entry *ke,
529 unsigned int *old_keycode)
530{
531 struct ati_remote2 *ar2 = input_get_drvdata(idev);
532 unsigned int mode;
533 int offset;
534 unsigned int index;
535 unsigned int scancode;
536
537 if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
538 if (ke->index >= ATI_REMOTE2_MODES *
539 ARRAY_SIZE(ati_remote2_key_table))
540 return -EINVAL;
541
542 mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
543 offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
544 } else {
545 if (input_scancode_to_scalar(ke, &scancode))
546 return -EINVAL;
547
548 mode = scancode >> 8;
549 if (mode > ATI_REMOTE2_PC)
550 return -EINVAL;
551
552 offset = ati_remote2_lookup(scancode & 0xff);
553 if (offset < 0)
554 return -EINVAL;
555 }
556
557 *old_keycode = ar2->keycode[mode][offset];
558 ar2->keycode[mode][offset] = ke->keycode;
559 __set_bit(ke->keycode, idev->keybit);
560
561 for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
562 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
563 if (ar2->keycode[mode][index] == *old_keycode)
564 return 0;
565 }
566 }
567
568 __clear_bit(*old_keycode, idev->keybit);
569
570 return 0;
571}
572
573static int ati_remote2_input_init(struct ati_remote2 *ar2)
574{
575 struct input_dev *idev;
576 int index, mode, retval;
577
578 idev = input_allocate_device();
579 if (!idev)
580 return -ENOMEM;
581
582 ar2->idev = idev;
583 input_set_drvdata(idev, ar2);
584
585 idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
586 idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
587 BIT_MASK(BTN_RIGHT);
588 idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
589
590 for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
591 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
592 ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
593 __set_bit(ar2->keycode[mode][index], idev->keybit);
594 }
595 }
596
597 /* AUX1-AUX4 and PC generate the same scancode. */
598 index = ati_remote2_lookup(0x3f);
599 ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
600 ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
601 ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
602 ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
603 ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
604 __set_bit(KEY_PROG1, idev->keybit);
605 __set_bit(KEY_PROG2, idev->keybit);
606 __set_bit(KEY_PROG3, idev->keybit);
607 __set_bit(KEY_PROG4, idev->keybit);
608 __set_bit(KEY_PC, idev->keybit);
609
610 idev->rep[REP_DELAY] = 250;
611 idev->rep[REP_PERIOD] = 33;
612
613 idev->open = ati_remote2_open;
614 idev->close = ati_remote2_close;
615
616 idev->getkeycode = ati_remote2_getkeycode;
617 idev->setkeycode = ati_remote2_setkeycode;
618
619 idev->name = ar2->name;
620 idev->phys = ar2->phys;
621
622 usb_to_input_id(ar2->udev, &idev->id);
623 idev->dev.parent = &ar2->udev->dev;
624
625 retval = input_register_device(idev);
626 if (retval)
627 input_free_device(idev);
628
629 return retval;
630}
631
632static int ati_remote2_urb_init(struct ati_remote2 *ar2)
633{
634 struct usb_device *udev = ar2->udev;
635 int i, pipe, maxp;
636
637 for (i = 0; i < 2; i++) {
638 ar2->buf[i] = usb_alloc_coherent(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
639 if (!ar2->buf[i])
640 return -ENOMEM;
641
642 ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
643 if (!ar2->urb[i])
644 return -ENOMEM;
645
646 pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
647 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
648 maxp = maxp > 4 ? 4 : maxp;
649
650 usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
651 i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
652 ar2, ar2->ep[i]->bInterval);
653 ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
654 ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
655 }
656
657 return 0;
658}
659
660static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
661{
662 int i;
663
664 for (i = 0; i < 2; i++) {
665 usb_free_urb(ar2->urb[i]);
666 usb_free_coherent(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
667 }
668}
669
670static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask)
671{
672 int r, i, channel;
673
674 /*
675 * Configure receiver to only accept input from remote "channel"
676 * channel == 0 -> Accept input from any remote channel
677 * channel == 1 -> Only accept input from remote channel 1
678 * channel == 2 -> Only accept input from remote channel 2
679 * ...
680 * channel == 16 -> Only accept input from remote channel 16
681 */
682
683 channel = 0;
684 for (i = 0; i < 16; i++) {
685 if ((1 << i) & ch_mask) {
686 if (!(~(1 << i) & ch_mask))
687 channel = i + 1;
688 break;
689 }
690 }
691
692 r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
693 0x20,
694 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
695 channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
696 if (r) {
697 dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
698 __func__, r);
699 return r;
700 }
701
702 return 0;
703}
704
705static ssize_t ati_remote2_show_channel_mask(struct device *dev,
706 struct device_attribute *attr,
707 char *buf)
708{
709 struct usb_device *udev = to_usb_device(dev);
710 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
711 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
712
713 return sprintf(buf, "0x%04x\n", ar2->channel_mask);
714}
715
716static ssize_t ati_remote2_store_channel_mask(struct device *dev,
717 struct device_attribute *attr,
718 const char *buf, size_t count)
719{
720 struct usb_device *udev = to_usb_device(dev);
721 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
722 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
723 unsigned int mask;
724 int r;
725
726 r = kstrtouint(buf, 0, &mask);
727 if (r)
728 return r;
729
730 if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
731 return -EINVAL;
732
733 r = usb_autopm_get_interface(ar2->intf[0]);
734 if (r) {
735 dev_err(&ar2->intf[0]->dev,
736 "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
737 return r;
738 }
739
740 mutex_lock(&ati_remote2_mutex);
741
742 if (mask != ar2->channel_mask) {
743 r = ati_remote2_setup(ar2, mask);
744 if (!r)
745 ar2->channel_mask = mask;
746 }
747
748 mutex_unlock(&ati_remote2_mutex);
749
750 usb_autopm_put_interface(ar2->intf[0]);
751
752 return r ? r : count;
753}
754
755static ssize_t ati_remote2_show_mode_mask(struct device *dev,
756 struct device_attribute *attr,
757 char *buf)
758{
759 struct usb_device *udev = to_usb_device(dev);
760 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
761 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
762
763 return sprintf(buf, "0x%02x\n", ar2->mode_mask);
764}
765
766static ssize_t ati_remote2_store_mode_mask(struct device *dev,
767 struct device_attribute *attr,
768 const char *buf, size_t count)
769{
770 struct usb_device *udev = to_usb_device(dev);
771 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
772 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
773 unsigned int mask;
774 int err;
775
776 err = kstrtouint(buf, 0, &mask);
777 if (err)
778 return err;
779
780 if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
781 return -EINVAL;
782
783 ar2->mode_mask = mask;
784
785 return count;
786}
787
788static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask,
789 ati_remote2_store_channel_mask);
790
791static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask,
792 ati_remote2_store_mode_mask);
793
794static struct attribute *ati_remote2_attrs[] = {
795 &dev_attr_channel_mask.attr,
796 &dev_attr_mode_mask.attr,
797 NULL,
798};
799
800static struct attribute_group ati_remote2_attr_group = {
801 .attrs = ati_remote2_attrs,
802};
803
804static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
805{
806 struct usb_device *udev = interface_to_usbdev(interface);
807 struct usb_host_interface *alt = interface->cur_altsetting;
808 struct ati_remote2 *ar2;
809 int r;
810
811 if (alt->desc.bInterfaceNumber)
812 return -ENODEV;
813
814 ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
815 if (!ar2)
816 return -ENOMEM;
817
818 ar2->udev = udev;
819
820 /* Sanity check, first interface must have an endpoint */
821 if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
822 dev_err(&interface->dev,
823 "%s(): interface 0 must have an endpoint\n", __func__);
824 r = -ENODEV;
825 goto fail1;
826 }
827 ar2->intf[0] = interface;
828 ar2->ep[0] = &alt->endpoint[0].desc;
829
830 /* Sanity check, the device must have two interfaces */
831 ar2->intf[1] = usb_ifnum_to_if(udev, 1);
832 if ((udev->actconfig->desc.bNumInterfaces < 2) || !ar2->intf[1]) {
833 dev_err(&interface->dev, "%s(): need 2 interfaces, found %d\n",
834 __func__, udev->actconfig->desc.bNumInterfaces);
835 r = -ENODEV;
836 goto fail1;
837 }
838
839 r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
840 if (r)
841 goto fail1;
842
843 /* Sanity check, second interface must have an endpoint */
844 alt = ar2->intf[1]->cur_altsetting;
845 if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
846 dev_err(&interface->dev,
847 "%s(): interface 1 must have an endpoint\n", __func__);
848 r = -ENODEV;
849 goto fail2;
850 }
851 ar2->ep[1] = &alt->endpoint[0].desc;
852
853 r = ati_remote2_urb_init(ar2);
854 if (r)
855 goto fail3;
856
857 ar2->channel_mask = channel_mask;
858 ar2->mode_mask = mode_mask;
859
860 r = ati_remote2_setup(ar2, ar2->channel_mask);
861 if (r)
862 goto fail3;
863
864 usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
865 strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
866
867 strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
868
869 r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
870 if (r)
871 goto fail3;
872
873 r = ati_remote2_input_init(ar2);
874 if (r)
875 goto fail4;
876
877 usb_set_intfdata(interface, ar2);
878
879 interface->needs_remote_wakeup = 1;
880
881 return 0;
882
883 fail4:
884 sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
885 fail3:
886 ati_remote2_urb_cleanup(ar2);
887 fail2:
888 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
889 fail1:
890 kfree(ar2);
891
892 return r;
893}
894
895static void ati_remote2_disconnect(struct usb_interface *interface)
896{
897 struct ati_remote2 *ar2;
898 struct usb_host_interface *alt = interface->cur_altsetting;
899
900 if (alt->desc.bInterfaceNumber)
901 return;
902
903 ar2 = usb_get_intfdata(interface);
904 usb_set_intfdata(interface, NULL);
905
906 input_unregister_device(ar2->idev);
907
908 sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
909
910 ati_remote2_urb_cleanup(ar2);
911
912 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
913
914 kfree(ar2);
915}
916
917static int ati_remote2_suspend(struct usb_interface *interface,
918 pm_message_t message)
919{
920 struct ati_remote2 *ar2;
921 struct usb_host_interface *alt = interface->cur_altsetting;
922
923 if (alt->desc.bInterfaceNumber)
924 return 0;
925
926 ar2 = usb_get_intfdata(interface);
927
928 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
929
930 mutex_lock(&ati_remote2_mutex);
931
932 if (ar2->flags & ATI_REMOTE2_OPENED)
933 ati_remote2_kill_urbs(ar2);
934
935 ar2->flags |= ATI_REMOTE2_SUSPENDED;
936
937 mutex_unlock(&ati_remote2_mutex);
938
939 return 0;
940}
941
942static int ati_remote2_resume(struct usb_interface *interface)
943{
944 struct ati_remote2 *ar2;
945 struct usb_host_interface *alt = interface->cur_altsetting;
946 int r = 0;
947
948 if (alt->desc.bInterfaceNumber)
949 return 0;
950
951 ar2 = usb_get_intfdata(interface);
952
953 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
954
955 mutex_lock(&ati_remote2_mutex);
956
957 if (ar2->flags & ATI_REMOTE2_OPENED)
958 r = ati_remote2_submit_urbs(ar2);
959
960 if (!r)
961 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
962
963 mutex_unlock(&ati_remote2_mutex);
964
965 return r;
966}
967
968static int ati_remote2_reset_resume(struct usb_interface *interface)
969{
970 struct ati_remote2 *ar2;
971 struct usb_host_interface *alt = interface->cur_altsetting;
972 int r = 0;
973
974 if (alt->desc.bInterfaceNumber)
975 return 0;
976
977 ar2 = usb_get_intfdata(interface);
978
979 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
980
981 mutex_lock(&ati_remote2_mutex);
982
983 r = ati_remote2_setup(ar2, ar2->channel_mask);
984 if (r)
985 goto out;
986
987 if (ar2->flags & ATI_REMOTE2_OPENED)
988 r = ati_remote2_submit_urbs(ar2);
989
990 if (!r)
991 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
992
993 out:
994 mutex_unlock(&ati_remote2_mutex);
995
996 return r;
997}
998
999static int ati_remote2_pre_reset(struct usb_interface *interface)
1000{
1001 struct ati_remote2 *ar2;
1002 struct usb_host_interface *alt = interface->cur_altsetting;
1003
1004 if (alt->desc.bInterfaceNumber)
1005 return 0;
1006
1007 ar2 = usb_get_intfdata(interface);
1008
1009 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
1010
1011 mutex_lock(&ati_remote2_mutex);
1012
1013 if (ar2->flags == ATI_REMOTE2_OPENED)
1014 ati_remote2_kill_urbs(ar2);
1015
1016 return 0;
1017}
1018
1019static int ati_remote2_post_reset(struct usb_interface *interface)
1020{
1021 struct ati_remote2 *ar2;
1022 struct usb_host_interface *alt = interface->cur_altsetting;
1023 int r = 0;
1024
1025 if (alt->desc.bInterfaceNumber)
1026 return 0;
1027
1028 ar2 = usb_get_intfdata(interface);
1029
1030 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
1031
1032 if (ar2->flags == ATI_REMOTE2_OPENED)
1033 r = ati_remote2_submit_urbs(ar2);
1034
1035 mutex_unlock(&ati_remote2_mutex);
1036
1037 return r;
1038}
1039
1040module_usb_driver(ati_remote2_driver);
1/*
2 * ati_remote2 - ATI/Philips USB RF remote driver
3 *
4 * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
5 * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2
9 * as published by the Free Software Foundation.
10 */
11
12#include <linux/usb/input.h>
13#include <linux/slab.h>
14#include <linux/module.h>
15
16#define DRIVER_DESC "ATI/Philips USB RF remote driver"
17
18MODULE_DESCRIPTION(DRIVER_DESC);
19MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
20MODULE_LICENSE("GPL");
21
22/*
23 * ATI Remote Wonder II Channel Configuration
24 *
25 * The remote control can by assigned one of sixteen "channels" in order to facilitate
26 * the use of multiple remote controls within range of each other.
27 * A remote's "channel" may be altered by pressing and holding the "PC" button for
28 * approximately 3 seconds, after which the button will slowly flash the count of the
29 * currently configured "channel", using the numeric keypad enter a number between 1 and
30 * 16 and then press the "PC" button again, the button will slowly flash the count of the
31 * newly configured "channel".
32 */
33
34enum {
35 ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF,
36 ATI_REMOTE2_MAX_MODE_MASK = 0x1F,
37};
38
39static int ati_remote2_set_mask(const char *val,
40 const struct kernel_param *kp,
41 unsigned int max)
42{
43 unsigned int mask;
44 int ret;
45
46 if (!val)
47 return -EINVAL;
48
49 ret = kstrtouint(val, 0, &mask);
50 if (ret)
51 return ret;
52
53 if (mask & ~max)
54 return -EINVAL;
55
56 *(unsigned int *)kp->arg = mask;
57
58 return 0;
59}
60
61static int ati_remote2_set_channel_mask(const char *val,
62 const struct kernel_param *kp)
63{
64 pr_debug("%s()\n", __func__);
65
66 return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
67}
68
69static int ati_remote2_get_channel_mask(char *buffer,
70 const struct kernel_param *kp)
71{
72 pr_debug("%s()\n", __func__);
73
74 return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg);
75}
76
77static int ati_remote2_set_mode_mask(const char *val,
78 const struct kernel_param *kp)
79{
80 pr_debug("%s()\n", __func__);
81
82 return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
83}
84
85static int ati_remote2_get_mode_mask(char *buffer,
86 const struct kernel_param *kp)
87{
88 pr_debug("%s()\n", __func__);
89
90 return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg);
91}
92
93static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
94#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
95static const struct kernel_param_ops param_ops_channel_mask = {
96 .set = ati_remote2_set_channel_mask,
97 .get = ati_remote2_get_channel_mask,
98};
99module_param(channel_mask, channel_mask, 0644);
100MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
101
102static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
103#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
104static const struct kernel_param_ops param_ops_mode_mask = {
105 .set = ati_remote2_set_mode_mask,
106 .get = ati_remote2_get_mode_mask,
107};
108module_param(mode_mask, mode_mask, 0644);
109MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
110
111static const struct usb_device_id ati_remote2_id_table[] = {
112 { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
113 { }
114};
115MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
116
117static DEFINE_MUTEX(ati_remote2_mutex);
118
119enum {
120 ATI_REMOTE2_OPENED = 0x1,
121 ATI_REMOTE2_SUSPENDED = 0x2,
122};
123
124enum {
125 ATI_REMOTE2_AUX1,
126 ATI_REMOTE2_AUX2,
127 ATI_REMOTE2_AUX3,
128 ATI_REMOTE2_AUX4,
129 ATI_REMOTE2_PC,
130 ATI_REMOTE2_MODES,
131};
132
133static const struct {
134 u8 hw_code;
135 u16 keycode;
136} ati_remote2_key_table[] = {
137 { 0x00, KEY_0 },
138 { 0x01, KEY_1 },
139 { 0x02, KEY_2 },
140 { 0x03, KEY_3 },
141 { 0x04, KEY_4 },
142 { 0x05, KEY_5 },
143 { 0x06, KEY_6 },
144 { 0x07, KEY_7 },
145 { 0x08, KEY_8 },
146 { 0x09, KEY_9 },
147 { 0x0c, KEY_POWER },
148 { 0x0d, KEY_MUTE },
149 { 0x10, KEY_VOLUMEUP },
150 { 0x11, KEY_VOLUMEDOWN },
151 { 0x20, KEY_CHANNELUP },
152 { 0x21, KEY_CHANNELDOWN },
153 { 0x28, KEY_FORWARD },
154 { 0x29, KEY_REWIND },
155 { 0x2c, KEY_PLAY },
156 { 0x30, KEY_PAUSE },
157 { 0x31, KEY_STOP },
158 { 0x37, KEY_RECORD },
159 { 0x38, KEY_DVD },
160 { 0x39, KEY_TV },
161 { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
162 { 0x54, KEY_MENU },
163 { 0x58, KEY_UP },
164 { 0x59, KEY_DOWN },
165 { 0x5a, KEY_LEFT },
166 { 0x5b, KEY_RIGHT },
167 { 0x5c, KEY_OK },
168 { 0x78, KEY_A },
169 { 0x79, KEY_B },
170 { 0x7a, KEY_C },
171 { 0x7b, KEY_D },
172 { 0x7c, KEY_E },
173 { 0x7d, KEY_F },
174 { 0x82, KEY_ENTER },
175 { 0x8e, KEY_VENDOR },
176 { 0x96, KEY_COFFEE },
177 { 0xa9, BTN_LEFT },
178 { 0xaa, BTN_RIGHT },
179 { 0xbe, KEY_QUESTION },
180 { 0xd0, KEY_EDIT },
181 { 0xd5, KEY_FRONT },
182 { 0xf9, KEY_INFO },
183};
184
185struct ati_remote2 {
186 struct input_dev *idev;
187 struct usb_device *udev;
188
189 struct usb_interface *intf[2];
190 struct usb_endpoint_descriptor *ep[2];
191 struct urb *urb[2];
192 void *buf[2];
193 dma_addr_t buf_dma[2];
194
195 unsigned long jiffies;
196 int mode;
197
198 char name[64];
199 char phys[64];
200
201 /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
202 u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
203
204 unsigned int flags;
205
206 unsigned int channel_mask;
207 unsigned int mode_mask;
208};
209
210static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
211static void ati_remote2_disconnect(struct usb_interface *interface);
212static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
213static int ati_remote2_resume(struct usb_interface *interface);
214static int ati_remote2_reset_resume(struct usb_interface *interface);
215static int ati_remote2_pre_reset(struct usb_interface *interface);
216static int ati_remote2_post_reset(struct usb_interface *interface);
217
218static struct usb_driver ati_remote2_driver = {
219 .name = "ati_remote2",
220 .probe = ati_remote2_probe,
221 .disconnect = ati_remote2_disconnect,
222 .id_table = ati_remote2_id_table,
223 .suspend = ati_remote2_suspend,
224 .resume = ati_remote2_resume,
225 .reset_resume = ati_remote2_reset_resume,
226 .pre_reset = ati_remote2_pre_reset,
227 .post_reset = ati_remote2_post_reset,
228 .supports_autosuspend = 1,
229};
230
231static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
232{
233 int r;
234
235 r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
236 if (r) {
237 dev_err(&ar2->intf[0]->dev,
238 "%s(): usb_submit_urb() = %d\n", __func__, r);
239 return r;
240 }
241 r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
242 if (r) {
243 usb_kill_urb(ar2->urb[0]);
244 dev_err(&ar2->intf[1]->dev,
245 "%s(): usb_submit_urb() = %d\n", __func__, r);
246 return r;
247 }
248
249 return 0;
250}
251
252static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
253{
254 usb_kill_urb(ar2->urb[1]);
255 usb_kill_urb(ar2->urb[0]);
256}
257
258static int ati_remote2_open(struct input_dev *idev)
259{
260 struct ati_remote2 *ar2 = input_get_drvdata(idev);
261 int r;
262
263 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
264
265 r = usb_autopm_get_interface(ar2->intf[0]);
266 if (r) {
267 dev_err(&ar2->intf[0]->dev,
268 "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
269 goto fail1;
270 }
271
272 mutex_lock(&ati_remote2_mutex);
273
274 if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
275 r = ati_remote2_submit_urbs(ar2);
276 if (r)
277 goto fail2;
278 }
279
280 ar2->flags |= ATI_REMOTE2_OPENED;
281
282 mutex_unlock(&ati_remote2_mutex);
283
284 usb_autopm_put_interface(ar2->intf[0]);
285
286 return 0;
287
288 fail2:
289 mutex_unlock(&ati_remote2_mutex);
290 usb_autopm_put_interface(ar2->intf[0]);
291 fail1:
292 return r;
293}
294
295static void ati_remote2_close(struct input_dev *idev)
296{
297 struct ati_remote2 *ar2 = input_get_drvdata(idev);
298
299 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
300
301 mutex_lock(&ati_remote2_mutex);
302
303 if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
304 ati_remote2_kill_urbs(ar2);
305
306 ar2->flags &= ~ATI_REMOTE2_OPENED;
307
308 mutex_unlock(&ati_remote2_mutex);
309}
310
311static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
312{
313 struct input_dev *idev = ar2->idev;
314 u8 *data = ar2->buf[0];
315 int channel, mode;
316
317 channel = data[0] >> 4;
318
319 if (!((1 << channel) & ar2->channel_mask))
320 return;
321
322 mode = data[0] & 0x0F;
323
324 if (mode > ATI_REMOTE2_PC) {
325 dev_err(&ar2->intf[0]->dev,
326 "Unknown mode byte (%02x %02x %02x %02x)\n",
327 data[3], data[2], data[1], data[0]);
328 return;
329 }
330
331 if (!((1 << mode) & ar2->mode_mask))
332 return;
333
334 input_event(idev, EV_REL, REL_X, (s8) data[1]);
335 input_event(idev, EV_REL, REL_Y, (s8) data[2]);
336 input_sync(idev);
337}
338
339static int ati_remote2_lookup(unsigned int hw_code)
340{
341 int i;
342
343 for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
344 if (ati_remote2_key_table[i].hw_code == hw_code)
345 return i;
346
347 return -1;
348}
349
350static void ati_remote2_input_key(struct ati_remote2 *ar2)
351{
352 struct input_dev *idev = ar2->idev;
353 u8 *data = ar2->buf[1];
354 int channel, mode, hw_code, index;
355
356 channel = data[0] >> 4;
357
358 if (!((1 << channel) & ar2->channel_mask))
359 return;
360
361 mode = data[0] & 0x0F;
362
363 if (mode > ATI_REMOTE2_PC) {
364 dev_err(&ar2->intf[1]->dev,
365 "Unknown mode byte (%02x %02x %02x %02x)\n",
366 data[3], data[2], data[1], data[0]);
367 return;
368 }
369
370 hw_code = data[2];
371 if (hw_code == 0x3f) {
372 /*
373 * For some incomprehensible reason the mouse pad generates
374 * events which look identical to the events from the last
375 * pressed mode key. Naturally we don't want to generate key
376 * events for the mouse pad so we filter out any subsequent
377 * events from the same mode key.
378 */
379 if (ar2->mode == mode)
380 return;
381
382 if (data[1] == 0)
383 ar2->mode = mode;
384 }
385
386 if (!((1 << mode) & ar2->mode_mask))
387 return;
388
389 index = ati_remote2_lookup(hw_code);
390 if (index < 0) {
391 dev_err(&ar2->intf[1]->dev,
392 "Unknown code byte (%02x %02x %02x %02x)\n",
393 data[3], data[2], data[1], data[0]);
394 return;
395 }
396
397 switch (data[1]) {
398 case 0: /* release */
399 break;
400 case 1: /* press */
401 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
402 break;
403 case 2: /* repeat */
404
405 /* No repeat for mouse buttons. */
406 if (ar2->keycode[mode][index] == BTN_LEFT ||
407 ar2->keycode[mode][index] == BTN_RIGHT)
408 return;
409
410 if (!time_after_eq(jiffies, ar2->jiffies))
411 return;
412
413 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
414 break;
415 default:
416 dev_err(&ar2->intf[1]->dev,
417 "Unknown state byte (%02x %02x %02x %02x)\n",
418 data[3], data[2], data[1], data[0]);
419 return;
420 }
421
422 input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
423 input_sync(idev);
424}
425
426static void ati_remote2_complete_mouse(struct urb *urb)
427{
428 struct ati_remote2 *ar2 = urb->context;
429 int r;
430
431 switch (urb->status) {
432 case 0:
433 usb_mark_last_busy(ar2->udev);
434 ati_remote2_input_mouse(ar2);
435 break;
436 case -ENOENT:
437 case -EILSEQ:
438 case -ECONNRESET:
439 case -ESHUTDOWN:
440 dev_dbg(&ar2->intf[0]->dev,
441 "%s(): urb status = %d\n", __func__, urb->status);
442 return;
443 default:
444 usb_mark_last_busy(ar2->udev);
445 dev_err(&ar2->intf[0]->dev,
446 "%s(): urb status = %d\n", __func__, urb->status);
447 }
448
449 r = usb_submit_urb(urb, GFP_ATOMIC);
450 if (r)
451 dev_err(&ar2->intf[0]->dev,
452 "%s(): usb_submit_urb() = %d\n", __func__, r);
453}
454
455static void ati_remote2_complete_key(struct urb *urb)
456{
457 struct ati_remote2 *ar2 = urb->context;
458 int r;
459
460 switch (urb->status) {
461 case 0:
462 usb_mark_last_busy(ar2->udev);
463 ati_remote2_input_key(ar2);
464 break;
465 case -ENOENT:
466 case -EILSEQ:
467 case -ECONNRESET:
468 case -ESHUTDOWN:
469 dev_dbg(&ar2->intf[1]->dev,
470 "%s(): urb status = %d\n", __func__, urb->status);
471 return;
472 default:
473 usb_mark_last_busy(ar2->udev);
474 dev_err(&ar2->intf[1]->dev,
475 "%s(): urb status = %d\n", __func__, urb->status);
476 }
477
478 r = usb_submit_urb(urb, GFP_ATOMIC);
479 if (r)
480 dev_err(&ar2->intf[1]->dev,
481 "%s(): usb_submit_urb() = %d\n", __func__, r);
482}
483
484static int ati_remote2_getkeycode(struct input_dev *idev,
485 struct input_keymap_entry *ke)
486{
487 struct ati_remote2 *ar2 = input_get_drvdata(idev);
488 unsigned int mode;
489 int offset;
490 unsigned int index;
491 unsigned int scancode;
492
493 if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
494 index = ke->index;
495 if (index >= ATI_REMOTE2_MODES *
496 ARRAY_SIZE(ati_remote2_key_table))
497 return -EINVAL;
498
499 mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
500 offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
501 scancode = (mode << 8) + ati_remote2_key_table[offset].hw_code;
502 } else {
503 if (input_scancode_to_scalar(ke, &scancode))
504 return -EINVAL;
505
506 mode = scancode >> 8;
507 if (mode > ATI_REMOTE2_PC)
508 return -EINVAL;
509
510 offset = ati_remote2_lookup(scancode & 0xff);
511 if (offset < 0)
512 return -EINVAL;
513
514 index = mode * ARRAY_SIZE(ati_remote2_key_table) + offset;
515 }
516
517 ke->keycode = ar2->keycode[mode][offset];
518 ke->len = sizeof(scancode);
519 memcpy(&ke->scancode, &scancode, sizeof(scancode));
520 ke->index = index;
521
522 return 0;
523}
524
525static int ati_remote2_setkeycode(struct input_dev *idev,
526 const struct input_keymap_entry *ke,
527 unsigned int *old_keycode)
528{
529 struct ati_remote2 *ar2 = input_get_drvdata(idev);
530 unsigned int mode;
531 int offset;
532 unsigned int index;
533 unsigned int scancode;
534
535 if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
536 if (ke->index >= ATI_REMOTE2_MODES *
537 ARRAY_SIZE(ati_remote2_key_table))
538 return -EINVAL;
539
540 mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
541 offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
542 } else {
543 if (input_scancode_to_scalar(ke, &scancode))
544 return -EINVAL;
545
546 mode = scancode >> 8;
547 if (mode > ATI_REMOTE2_PC)
548 return -EINVAL;
549
550 offset = ati_remote2_lookup(scancode & 0xff);
551 if (offset < 0)
552 return -EINVAL;
553 }
554
555 *old_keycode = ar2->keycode[mode][offset];
556 ar2->keycode[mode][offset] = ke->keycode;
557 __set_bit(ke->keycode, idev->keybit);
558
559 for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
560 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
561 if (ar2->keycode[mode][index] == *old_keycode)
562 return 0;
563 }
564 }
565
566 __clear_bit(*old_keycode, idev->keybit);
567
568 return 0;
569}
570
571static int ati_remote2_input_init(struct ati_remote2 *ar2)
572{
573 struct input_dev *idev;
574 int index, mode, retval;
575
576 idev = input_allocate_device();
577 if (!idev)
578 return -ENOMEM;
579
580 ar2->idev = idev;
581 input_set_drvdata(idev, ar2);
582
583 idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
584 idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
585 BIT_MASK(BTN_RIGHT);
586 idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
587
588 for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
589 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
590 ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
591 __set_bit(ar2->keycode[mode][index], idev->keybit);
592 }
593 }
594
595 /* AUX1-AUX4 and PC generate the same scancode. */
596 index = ati_remote2_lookup(0x3f);
597 ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
598 ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
599 ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
600 ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
601 ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
602 __set_bit(KEY_PROG1, idev->keybit);
603 __set_bit(KEY_PROG2, idev->keybit);
604 __set_bit(KEY_PROG3, idev->keybit);
605 __set_bit(KEY_PROG4, idev->keybit);
606 __set_bit(KEY_PC, idev->keybit);
607
608 idev->rep[REP_DELAY] = 250;
609 idev->rep[REP_PERIOD] = 33;
610
611 idev->open = ati_remote2_open;
612 idev->close = ati_remote2_close;
613
614 idev->getkeycode = ati_remote2_getkeycode;
615 idev->setkeycode = ati_remote2_setkeycode;
616
617 idev->name = ar2->name;
618 idev->phys = ar2->phys;
619
620 usb_to_input_id(ar2->udev, &idev->id);
621 idev->dev.parent = &ar2->udev->dev;
622
623 retval = input_register_device(idev);
624 if (retval)
625 input_free_device(idev);
626
627 return retval;
628}
629
630static int ati_remote2_urb_init(struct ati_remote2 *ar2)
631{
632 struct usb_device *udev = ar2->udev;
633 int i, pipe, maxp;
634
635 for (i = 0; i < 2; i++) {
636 ar2->buf[i] = usb_alloc_coherent(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
637 if (!ar2->buf[i])
638 return -ENOMEM;
639
640 ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
641 if (!ar2->urb[i])
642 return -ENOMEM;
643
644 pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
645 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
646 maxp = maxp > 4 ? 4 : maxp;
647
648 usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
649 i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
650 ar2, ar2->ep[i]->bInterval);
651 ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
652 ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
653 }
654
655 return 0;
656}
657
658static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
659{
660 int i;
661
662 for (i = 0; i < 2; i++) {
663 usb_free_urb(ar2->urb[i]);
664 usb_free_coherent(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
665 }
666}
667
668static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask)
669{
670 int r, i, channel;
671
672 /*
673 * Configure receiver to only accept input from remote "channel"
674 * channel == 0 -> Accept input from any remote channel
675 * channel == 1 -> Only accept input from remote channel 1
676 * channel == 2 -> Only accept input from remote channel 2
677 * ...
678 * channel == 16 -> Only accept input from remote channel 16
679 */
680
681 channel = 0;
682 for (i = 0; i < 16; i++) {
683 if ((1 << i) & ch_mask) {
684 if (!(~(1 << i) & ch_mask))
685 channel = i + 1;
686 break;
687 }
688 }
689
690 r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
691 0x20,
692 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
693 channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
694 if (r) {
695 dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
696 __func__, r);
697 return r;
698 }
699
700 return 0;
701}
702
703static ssize_t ati_remote2_show_channel_mask(struct device *dev,
704 struct device_attribute *attr,
705 char *buf)
706{
707 struct usb_device *udev = to_usb_device(dev);
708 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
709 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
710
711 return sprintf(buf, "0x%04x\n", ar2->channel_mask);
712}
713
714static ssize_t ati_remote2_store_channel_mask(struct device *dev,
715 struct device_attribute *attr,
716 const char *buf, size_t count)
717{
718 struct usb_device *udev = to_usb_device(dev);
719 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
720 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
721 unsigned int mask;
722 int r;
723
724 r = kstrtouint(buf, 0, &mask);
725 if (r)
726 return r;
727
728 if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
729 return -EINVAL;
730
731 r = usb_autopm_get_interface(ar2->intf[0]);
732 if (r) {
733 dev_err(&ar2->intf[0]->dev,
734 "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
735 return r;
736 }
737
738 mutex_lock(&ati_remote2_mutex);
739
740 if (mask != ar2->channel_mask) {
741 r = ati_remote2_setup(ar2, mask);
742 if (!r)
743 ar2->channel_mask = mask;
744 }
745
746 mutex_unlock(&ati_remote2_mutex);
747
748 usb_autopm_put_interface(ar2->intf[0]);
749
750 return r ? r : count;
751}
752
753static ssize_t ati_remote2_show_mode_mask(struct device *dev,
754 struct device_attribute *attr,
755 char *buf)
756{
757 struct usb_device *udev = to_usb_device(dev);
758 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
759 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
760
761 return sprintf(buf, "0x%02x\n", ar2->mode_mask);
762}
763
764static ssize_t ati_remote2_store_mode_mask(struct device *dev,
765 struct device_attribute *attr,
766 const char *buf, size_t count)
767{
768 struct usb_device *udev = to_usb_device(dev);
769 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
770 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
771 unsigned int mask;
772 int err;
773
774 err = kstrtouint(buf, 0, &mask);
775 if (err)
776 return err;
777
778 if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
779 return -EINVAL;
780
781 ar2->mode_mask = mask;
782
783 return count;
784}
785
786static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask,
787 ati_remote2_store_channel_mask);
788
789static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask,
790 ati_remote2_store_mode_mask);
791
792static struct attribute *ati_remote2_attrs[] = {
793 &dev_attr_channel_mask.attr,
794 &dev_attr_mode_mask.attr,
795 NULL,
796};
797
798static struct attribute_group ati_remote2_attr_group = {
799 .attrs = ati_remote2_attrs,
800};
801
802static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
803{
804 struct usb_device *udev = interface_to_usbdev(interface);
805 struct usb_host_interface *alt = interface->cur_altsetting;
806 struct ati_remote2 *ar2;
807 int r;
808
809 if (alt->desc.bInterfaceNumber)
810 return -ENODEV;
811
812 ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
813 if (!ar2)
814 return -ENOMEM;
815
816 ar2->udev = udev;
817
818 /* Sanity check, first interface must have an endpoint */
819 if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
820 dev_err(&interface->dev,
821 "%s(): interface 0 must have an endpoint\n", __func__);
822 r = -ENODEV;
823 goto fail1;
824 }
825 ar2->intf[0] = interface;
826 ar2->ep[0] = &alt->endpoint[0].desc;
827
828 /* Sanity check, the device must have two interfaces */
829 ar2->intf[1] = usb_ifnum_to_if(udev, 1);
830 if ((udev->actconfig->desc.bNumInterfaces < 2) || !ar2->intf[1]) {
831 dev_err(&interface->dev, "%s(): need 2 interfaces, found %d\n",
832 __func__, udev->actconfig->desc.bNumInterfaces);
833 r = -ENODEV;
834 goto fail1;
835 }
836
837 r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
838 if (r)
839 goto fail1;
840
841 /* Sanity check, second interface must have an endpoint */
842 alt = ar2->intf[1]->cur_altsetting;
843 if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
844 dev_err(&interface->dev,
845 "%s(): interface 1 must have an endpoint\n", __func__);
846 r = -ENODEV;
847 goto fail2;
848 }
849 ar2->ep[1] = &alt->endpoint[0].desc;
850
851 r = ati_remote2_urb_init(ar2);
852 if (r)
853 goto fail3;
854
855 ar2->channel_mask = channel_mask;
856 ar2->mode_mask = mode_mask;
857
858 r = ati_remote2_setup(ar2, ar2->channel_mask);
859 if (r)
860 goto fail3;
861
862 usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
863 strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
864
865 strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
866
867 r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
868 if (r)
869 goto fail3;
870
871 r = ati_remote2_input_init(ar2);
872 if (r)
873 goto fail4;
874
875 usb_set_intfdata(interface, ar2);
876
877 interface->needs_remote_wakeup = 1;
878
879 return 0;
880
881 fail4:
882 sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
883 fail3:
884 ati_remote2_urb_cleanup(ar2);
885 fail2:
886 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
887 fail1:
888 kfree(ar2);
889
890 return r;
891}
892
893static void ati_remote2_disconnect(struct usb_interface *interface)
894{
895 struct ati_remote2 *ar2;
896 struct usb_host_interface *alt = interface->cur_altsetting;
897
898 if (alt->desc.bInterfaceNumber)
899 return;
900
901 ar2 = usb_get_intfdata(interface);
902 usb_set_intfdata(interface, NULL);
903
904 input_unregister_device(ar2->idev);
905
906 sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
907
908 ati_remote2_urb_cleanup(ar2);
909
910 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
911
912 kfree(ar2);
913}
914
915static int ati_remote2_suspend(struct usb_interface *interface,
916 pm_message_t message)
917{
918 struct ati_remote2 *ar2;
919 struct usb_host_interface *alt = interface->cur_altsetting;
920
921 if (alt->desc.bInterfaceNumber)
922 return 0;
923
924 ar2 = usb_get_intfdata(interface);
925
926 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
927
928 mutex_lock(&ati_remote2_mutex);
929
930 if (ar2->flags & ATI_REMOTE2_OPENED)
931 ati_remote2_kill_urbs(ar2);
932
933 ar2->flags |= ATI_REMOTE2_SUSPENDED;
934
935 mutex_unlock(&ati_remote2_mutex);
936
937 return 0;
938}
939
940static int ati_remote2_resume(struct usb_interface *interface)
941{
942 struct ati_remote2 *ar2;
943 struct usb_host_interface *alt = interface->cur_altsetting;
944 int r = 0;
945
946 if (alt->desc.bInterfaceNumber)
947 return 0;
948
949 ar2 = usb_get_intfdata(interface);
950
951 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
952
953 mutex_lock(&ati_remote2_mutex);
954
955 if (ar2->flags & ATI_REMOTE2_OPENED)
956 r = ati_remote2_submit_urbs(ar2);
957
958 if (!r)
959 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
960
961 mutex_unlock(&ati_remote2_mutex);
962
963 return r;
964}
965
966static int ati_remote2_reset_resume(struct usb_interface *interface)
967{
968 struct ati_remote2 *ar2;
969 struct usb_host_interface *alt = interface->cur_altsetting;
970 int r = 0;
971
972 if (alt->desc.bInterfaceNumber)
973 return 0;
974
975 ar2 = usb_get_intfdata(interface);
976
977 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
978
979 mutex_lock(&ati_remote2_mutex);
980
981 r = ati_remote2_setup(ar2, ar2->channel_mask);
982 if (r)
983 goto out;
984
985 if (ar2->flags & ATI_REMOTE2_OPENED)
986 r = ati_remote2_submit_urbs(ar2);
987
988 if (!r)
989 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
990
991 out:
992 mutex_unlock(&ati_remote2_mutex);
993
994 return r;
995}
996
997static int ati_remote2_pre_reset(struct usb_interface *interface)
998{
999 struct ati_remote2 *ar2;
1000 struct usb_host_interface *alt = interface->cur_altsetting;
1001
1002 if (alt->desc.bInterfaceNumber)
1003 return 0;
1004
1005 ar2 = usb_get_intfdata(interface);
1006
1007 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
1008
1009 mutex_lock(&ati_remote2_mutex);
1010
1011 if (ar2->flags == ATI_REMOTE2_OPENED)
1012 ati_remote2_kill_urbs(ar2);
1013
1014 return 0;
1015}
1016
1017static int ati_remote2_post_reset(struct usb_interface *interface)
1018{
1019 struct ati_remote2 *ar2;
1020 struct usb_host_interface *alt = interface->cur_altsetting;
1021 int r = 0;
1022
1023 if (alt->desc.bInterfaceNumber)
1024 return 0;
1025
1026 ar2 = usb_get_intfdata(interface);
1027
1028 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
1029
1030 if (ar2->flags == ATI_REMOTE2_OPENED)
1031 r = ati_remote2_submit_urbs(ar2);
1032
1033 mutex_unlock(&ati_remote2_mutex);
1034
1035 return r;
1036}
1037
1038module_usb_driver(ati_remote2_driver);