Loading...
1/*
2 * Texas Instruments DSPS platforms "glue layer"
3 *
4 * Copyright (C) 2012, by Texas Instruments
5 *
6 * Based on the am35x "glue layer" code.
7 *
8 * This file is part of the Inventra Controller Driver for Linux.
9 *
10 * The Inventra Controller Driver for Linux is free software; you
11 * can redistribute it and/or modify it under the terms of the GNU
12 * General Public License version 2 as published by the Free Software
13 * Foundation.
14 *
15 * The Inventra Controller Driver for Linux is distributed in
16 * the hope that it will be useful, but WITHOUT ANY WARRANTY;
17 * without even the implied warranty of MERCHANTABILITY or
18 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
19 * License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with The Inventra Controller Driver for Linux ; if not,
23 * write to the Free Software Foundation, Inc., 59 Temple Place,
24 * Suite 330, Boston, MA 02111-1307 USA
25 *
26 * musb_dsps.c will be a common file for all the TI DSPS platforms
27 * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x.
28 * For now only ti81x is using this and in future davinci.c, am35x.c
29 * da8xx.c would be merged to this file after testing.
30 */
31
32#include <linux/io.h>
33#include <linux/err.h>
34#include <linux/platform_device.h>
35#include <linux/dma-mapping.h>
36#include <linux/pm_runtime.h>
37#include <linux/module.h>
38#include <linux/usb/usb_phy_generic.h>
39#include <linux/platform_data/usb-omap.h>
40#include <linux/sizes.h>
41
42#include <linux/of.h>
43#include <linux/of_device.h>
44#include <linux/of_address.h>
45#include <linux/of_irq.h>
46#include <linux/usb/of.h>
47
48#include <linux/debugfs.h>
49
50#include "musb_core.h"
51
52static const struct of_device_id musb_dsps_of_match[];
53
54/**
55 * avoid using musb_readx()/musb_writex() as glue layer should not be
56 * dependent on musb core layer symbols.
57 */
58static inline u8 dsps_readb(const void __iomem *addr, unsigned offset)
59{
60 return __raw_readb(addr + offset);
61}
62
63static inline u32 dsps_readl(const void __iomem *addr, unsigned offset)
64{
65 return __raw_readl(addr + offset);
66}
67
68static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data)
69{
70 __raw_writeb(data, addr + offset);
71}
72
73static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data)
74{
75 __raw_writel(data, addr + offset);
76}
77
78/**
79 * DSPS musb wrapper register offset.
80 * FIXME: This should be expanded to have all the wrapper registers from TI DSPS
81 * musb ips.
82 */
83struct dsps_musb_wrapper {
84 u16 revision;
85 u16 control;
86 u16 status;
87 u16 epintr_set;
88 u16 epintr_clear;
89 u16 epintr_status;
90 u16 coreintr_set;
91 u16 coreintr_clear;
92 u16 coreintr_status;
93 u16 phy_utmi;
94 u16 mode;
95 u16 tx_mode;
96 u16 rx_mode;
97
98 /* bit positions for control */
99 unsigned reset:5;
100
101 /* bit positions for interrupt */
102 unsigned usb_shift:5;
103 u32 usb_mask;
104 u32 usb_bitmap;
105 unsigned drvvbus:5;
106
107 unsigned txep_shift:5;
108 u32 txep_mask;
109 u32 txep_bitmap;
110
111 unsigned rxep_shift:5;
112 u32 rxep_mask;
113 u32 rxep_bitmap;
114
115 /* bit positions for phy_utmi */
116 unsigned otg_disable:5;
117
118 /* bit positions for mode */
119 unsigned iddig:5;
120 unsigned iddig_mux:5;
121 /* miscellaneous stuff */
122 unsigned poll_timeout;
123};
124
125/*
126 * register shadow for suspend
127 */
128struct dsps_context {
129 u32 control;
130 u32 epintr;
131 u32 coreintr;
132 u32 phy_utmi;
133 u32 mode;
134 u32 tx_mode;
135 u32 rx_mode;
136};
137
138/**
139 * DSPS glue structure.
140 */
141struct dsps_glue {
142 struct device *dev;
143 struct platform_device *musb; /* child musb pdev */
144 const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
145 struct timer_list timer; /* otg_workaround timer */
146 unsigned long last_timer; /* last timer data for each instance */
147 bool sw_babble_enabled;
148
149 struct dsps_context context;
150 struct debugfs_regset32 regset;
151 struct dentry *dbgfs_root;
152};
153
154static const struct debugfs_reg32 dsps_musb_regs[] = {
155 { "revision", 0x00 },
156 { "control", 0x14 },
157 { "status", 0x18 },
158 { "eoi", 0x24 },
159 { "intr0_stat", 0x30 },
160 { "intr1_stat", 0x34 },
161 { "intr0_set", 0x38 },
162 { "intr1_set", 0x3c },
163 { "txmode", 0x70 },
164 { "rxmode", 0x74 },
165 { "autoreq", 0xd0 },
166 { "srpfixtime", 0xd4 },
167 { "tdown", 0xd8 },
168 { "phy_utmi", 0xe0 },
169 { "mode", 0xe8 },
170};
171
172static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
173{
174 struct device *dev = musb->controller;
175 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
176
177 if (timeout == 0)
178 timeout = jiffies + msecs_to_jiffies(3);
179
180 /* Never idle if active, or when VBUS timeout is not set as host */
181 if (musb->is_active || (musb->a_wait_bcon == 0 &&
182 musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
183 dev_dbg(musb->controller, "%s active, deleting timer\n",
184 usb_otg_state_string(musb->xceiv->otg->state));
185 del_timer(&glue->timer);
186 glue->last_timer = jiffies;
187 return;
188 }
189 if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE)
190 return;
191
192 if (!musb->g.dev.driver)
193 return;
194
195 if (time_after(glue->last_timer, timeout) &&
196 timer_pending(&glue->timer)) {
197 dev_dbg(musb->controller,
198 "Longer idle timer already pending, ignoring...\n");
199 return;
200 }
201 glue->last_timer = timeout;
202
203 dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
204 usb_otg_state_string(musb->xceiv->otg->state),
205 jiffies_to_msecs(timeout - jiffies));
206 mod_timer(&glue->timer, timeout);
207}
208
209/**
210 * dsps_musb_enable - enable interrupts
211 */
212static void dsps_musb_enable(struct musb *musb)
213{
214 struct device *dev = musb->controller;
215 struct platform_device *pdev = to_platform_device(dev->parent);
216 struct dsps_glue *glue = platform_get_drvdata(pdev);
217 const struct dsps_musb_wrapper *wrp = glue->wrp;
218 void __iomem *reg_base = musb->ctrl_base;
219 u32 epmask, coremask;
220
221 /* Workaround: setup IRQs through both register sets. */
222 epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) |
223 ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
224 coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
225
226 dsps_writel(reg_base, wrp->epintr_set, epmask);
227 dsps_writel(reg_base, wrp->coreintr_set, coremask);
228 /* start polling for ID change in dual-role idle mode */
229 if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
230 musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
231 mod_timer(&glue->timer, jiffies +
232 msecs_to_jiffies(wrp->poll_timeout));
233 dsps_musb_try_idle(musb, 0);
234}
235
236/**
237 * dsps_musb_disable - disable HDRC and flush interrupts
238 */
239static void dsps_musb_disable(struct musb *musb)
240{
241 struct device *dev = musb->controller;
242 struct platform_device *pdev = to_platform_device(dev->parent);
243 struct dsps_glue *glue = platform_get_drvdata(pdev);
244 const struct dsps_musb_wrapper *wrp = glue->wrp;
245 void __iomem *reg_base = musb->ctrl_base;
246
247 dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
248 dsps_writel(reg_base, wrp->epintr_clear,
249 wrp->txep_bitmap | wrp->rxep_bitmap);
250 dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
251}
252
253static void otg_timer(unsigned long _musb)
254{
255 struct musb *musb = (void *)_musb;
256 void __iomem *mregs = musb->mregs;
257 struct device *dev = musb->controller;
258 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
259 const struct dsps_musb_wrapper *wrp = glue->wrp;
260 u8 devctl;
261 unsigned long flags;
262 int skip_session = 0;
263
264 /*
265 * We poll because DSPS IP's won't expose several OTG-critical
266 * status change events (from the transceiver) otherwise.
267 */
268 devctl = dsps_readb(mregs, MUSB_DEVCTL);
269 dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
270 usb_otg_state_string(musb->xceiv->otg->state));
271
272 spin_lock_irqsave(&musb->lock, flags);
273 switch (musb->xceiv->otg->state) {
274 case OTG_STATE_A_WAIT_BCON:
275 dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
276 skip_session = 1;
277 /* fall */
278
279 case OTG_STATE_A_IDLE:
280 case OTG_STATE_B_IDLE:
281 if (devctl & MUSB_DEVCTL_BDEVICE) {
282 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
283 MUSB_DEV_MODE(musb);
284 } else {
285 musb->xceiv->otg->state = OTG_STATE_A_IDLE;
286 MUSB_HST_MODE(musb);
287 }
288 if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
289 dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
290 mod_timer(&glue->timer, jiffies +
291 msecs_to_jiffies(wrp->poll_timeout));
292 break;
293 case OTG_STATE_A_WAIT_VFALL:
294 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
295 dsps_writel(musb->ctrl_base, wrp->coreintr_set,
296 MUSB_INTR_VBUSERROR << wrp->usb_shift);
297 break;
298 default:
299 break;
300 }
301 spin_unlock_irqrestore(&musb->lock, flags);
302}
303
304static irqreturn_t dsps_interrupt(int irq, void *hci)
305{
306 struct musb *musb = hci;
307 void __iomem *reg_base = musb->ctrl_base;
308 struct device *dev = musb->controller;
309 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
310 const struct dsps_musb_wrapper *wrp = glue->wrp;
311 unsigned long flags;
312 irqreturn_t ret = IRQ_NONE;
313 u32 epintr, usbintr;
314
315 spin_lock_irqsave(&musb->lock, flags);
316
317 /* Get endpoint interrupts */
318 epintr = dsps_readl(reg_base, wrp->epintr_status);
319 musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
320 musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
321
322 if (epintr)
323 dsps_writel(reg_base, wrp->epintr_status, epintr);
324
325 /* Get usb core interrupts */
326 usbintr = dsps_readl(reg_base, wrp->coreintr_status);
327 if (!usbintr && !epintr)
328 goto out;
329
330 musb->int_usb = (usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
331 if (usbintr)
332 dsps_writel(reg_base, wrp->coreintr_status, usbintr);
333
334 dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
335 usbintr, epintr);
336
337 if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
338 int drvvbus = dsps_readl(reg_base, wrp->status);
339 void __iomem *mregs = musb->mregs;
340 u8 devctl = dsps_readb(mregs, MUSB_DEVCTL);
341 int err;
342
343 err = musb->int_usb & MUSB_INTR_VBUSERROR;
344 if (err) {
345 /*
346 * The Mentor core doesn't debounce VBUS as needed
347 * to cope with device connect current spikes. This
348 * means it's not uncommon for bus-powered devices
349 * to get VBUS errors during enumeration.
350 *
351 * This is a workaround, but newer RTL from Mentor
352 * seems to allow a better one: "re"-starting sessions
353 * without waiting for VBUS to stop registering in
354 * devctl.
355 */
356 musb->int_usb &= ~MUSB_INTR_VBUSERROR;
357 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
358 mod_timer(&glue->timer, jiffies +
359 msecs_to_jiffies(wrp->poll_timeout));
360 WARNING("VBUS error workaround (delay coming)\n");
361 } else if (drvvbus) {
362 MUSB_HST_MODE(musb);
363 musb->xceiv->otg->default_a = 1;
364 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
365 del_timer(&glue->timer);
366 } else {
367 musb->is_active = 0;
368 MUSB_DEV_MODE(musb);
369 musb->xceiv->otg->default_a = 0;
370 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
371 }
372
373 /* NOTE: this must complete power-on within 100 ms. */
374 dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
375 drvvbus ? "on" : "off",
376 usb_otg_state_string(musb->xceiv->otg->state),
377 err ? " ERROR" : "",
378 devctl);
379 ret = IRQ_HANDLED;
380 }
381
382 if (musb->int_tx || musb->int_rx || musb->int_usb)
383 ret |= musb_interrupt(musb);
384
385 /* Poll for ID change in OTG port mode */
386 if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
387 musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
388 mod_timer(&glue->timer, jiffies +
389 msecs_to_jiffies(wrp->poll_timeout));
390out:
391 spin_unlock_irqrestore(&musb->lock, flags);
392
393 return ret;
394}
395
396static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue)
397{
398 struct dentry *root;
399 struct dentry *file;
400 char buf[128];
401
402 sprintf(buf, "%s.dsps", dev_name(musb->controller));
403 root = debugfs_create_dir(buf, NULL);
404 if (!root)
405 return -ENOMEM;
406 glue->dbgfs_root = root;
407
408 glue->regset.regs = dsps_musb_regs;
409 glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs);
410 glue->regset.base = musb->ctrl_base;
411
412 file = debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset);
413 if (!file) {
414 debugfs_remove_recursive(root);
415 return -ENOMEM;
416 }
417 return 0;
418}
419
420static int dsps_musb_init(struct musb *musb)
421{
422 struct device *dev = musb->controller;
423 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
424 struct platform_device *parent = to_platform_device(dev->parent);
425 const struct dsps_musb_wrapper *wrp = glue->wrp;
426 void __iomem *reg_base;
427 struct resource *r;
428 u32 rev, val;
429 int ret;
430
431 r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control");
432 reg_base = devm_ioremap_resource(dev, r);
433 if (IS_ERR(reg_base))
434 return PTR_ERR(reg_base);
435 musb->ctrl_base = reg_base;
436
437 /* NOP driver needs change if supporting dual instance */
438 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0);
439 if (IS_ERR(musb->xceiv))
440 return PTR_ERR(musb->xceiv);
441
442 musb->phy = devm_phy_get(dev->parent, "usb2-phy");
443
444 /* Returns zero if e.g. not clocked */
445 rev = dsps_readl(reg_base, wrp->revision);
446 if (!rev)
447 return -ENODEV;
448
449 usb_phy_init(musb->xceiv);
450 if (IS_ERR(musb->phy)) {
451 musb->phy = NULL;
452 } else {
453 ret = phy_init(musb->phy);
454 if (ret < 0)
455 return ret;
456 ret = phy_power_on(musb->phy);
457 if (ret) {
458 phy_exit(musb->phy);
459 return ret;
460 }
461 }
462
463 setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
464
465 /* Reset the musb */
466 dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
467
468 musb->isr = dsps_interrupt;
469
470 /* reset the otgdisable bit, needed for host mode to work */
471 val = dsps_readl(reg_base, wrp->phy_utmi);
472 val &= ~(1 << wrp->otg_disable);
473 dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
474
475 /*
476 * Check whether the dsps version has babble control enabled.
477 * In latest silicon revision the babble control logic is enabled.
478 * If MUSB_BABBLE_CTL returns 0x4 then we have the babble control
479 * logic enabled.
480 */
481 val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
482 if (val & MUSB_BABBLE_RCV_DISABLE) {
483 glue->sw_babble_enabled = true;
484 val |= MUSB_BABBLE_SW_SESSION_CTRL;
485 dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
486 }
487
488 return dsps_musb_dbg_init(musb, glue);
489}
490
491static int dsps_musb_exit(struct musb *musb)
492{
493 struct device *dev = musb->controller;
494 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
495
496 del_timer_sync(&glue->timer);
497 usb_phy_shutdown(musb->xceiv);
498 phy_power_off(musb->phy);
499 phy_exit(musb->phy);
500 debugfs_remove_recursive(glue->dbgfs_root);
501
502 return 0;
503}
504
505static int dsps_musb_set_mode(struct musb *musb, u8 mode)
506{
507 struct device *dev = musb->controller;
508 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
509 const struct dsps_musb_wrapper *wrp = glue->wrp;
510 void __iomem *ctrl_base = musb->ctrl_base;
511 u32 reg;
512
513 reg = dsps_readl(ctrl_base, wrp->mode);
514
515 switch (mode) {
516 case MUSB_HOST:
517 reg &= ~(1 << wrp->iddig);
518
519 /*
520 * if we're setting mode to host-only or device-only, we're
521 * going to ignore whatever the PHY sends us and just force
522 * ID pin status by SW
523 */
524 reg |= (1 << wrp->iddig_mux);
525
526 dsps_writel(ctrl_base, wrp->mode, reg);
527 dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
528 break;
529 case MUSB_PERIPHERAL:
530 reg |= (1 << wrp->iddig);
531
532 /*
533 * if we're setting mode to host-only or device-only, we're
534 * going to ignore whatever the PHY sends us and just force
535 * ID pin status by SW
536 */
537 reg |= (1 << wrp->iddig_mux);
538
539 dsps_writel(ctrl_base, wrp->mode, reg);
540 break;
541 case MUSB_OTG:
542 dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
543 break;
544 default:
545 dev_err(glue->dev, "unsupported mode %d\n", mode);
546 return -EINVAL;
547 }
548
549 return 0;
550}
551
552static bool dsps_sw_babble_control(struct musb *musb)
553{
554 u8 babble_ctl;
555 bool session_restart = false;
556
557 babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
558 dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n",
559 babble_ctl);
560 /*
561 * check line monitor flag to check whether babble is
562 * due to noise
563 */
564 dev_dbg(musb->controller, "STUCK_J is %s\n",
565 babble_ctl & MUSB_BABBLE_STUCK_J ? "set" : "reset");
566
567 if (babble_ctl & MUSB_BABBLE_STUCK_J) {
568 int timeout = 10;
569
570 /*
571 * babble is due to noise, then set transmit idle (d7 bit)
572 * to resume normal operation
573 */
574 babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
575 babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE;
576 dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
577
578 /* wait till line monitor flag cleared */
579 dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n");
580 do {
581 babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
582 udelay(1);
583 } while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--);
584
585 /* check whether stuck_at_j bit cleared */
586 if (babble_ctl & MUSB_BABBLE_STUCK_J) {
587 /*
588 * real babble condition has occurred
589 * restart the controller to start the
590 * session again
591 */
592 dev_dbg(musb->controller, "J not cleared, misc (%x)\n",
593 babble_ctl);
594 session_restart = true;
595 }
596 } else {
597 session_restart = true;
598 }
599
600 return session_restart;
601}
602
603static int dsps_musb_recover(struct musb *musb)
604{
605 struct device *dev = musb->controller;
606 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
607 int session_restart = 0;
608
609 if (glue->sw_babble_enabled)
610 session_restart = dsps_sw_babble_control(musb);
611 else
612 session_restart = 1;
613
614 return session_restart ? 0 : -EPIPE;
615}
616
617/* Similar to am35x, dm81xx support only 32-bit read operation */
618static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
619{
620 void __iomem *fifo = hw_ep->fifo;
621
622 if (len >= 4) {
623 ioread32_rep(fifo, dst, len >> 2);
624 dst += len & ~0x03;
625 len &= 0x03;
626 }
627
628 /* Read any remaining 1 to 3 bytes */
629 if (len > 0) {
630 u32 val = musb_readl(fifo, 0);
631 memcpy(dst, &val, len);
632 }
633}
634
635static struct musb_platform_ops dsps_ops = {
636 .quirks = MUSB_DMA_CPPI41 | MUSB_INDEXED_EP,
637 .init = dsps_musb_init,
638 .exit = dsps_musb_exit,
639
640#ifdef CONFIG_USB_TI_CPPI41_DMA
641 .dma_init = cppi41_dma_controller_create,
642 .dma_exit = cppi41_dma_controller_destroy,
643#endif
644 .enable = dsps_musb_enable,
645 .disable = dsps_musb_disable,
646
647 .try_idle = dsps_musb_try_idle,
648 .set_mode = dsps_musb_set_mode,
649 .recover = dsps_musb_recover,
650};
651
652static u64 musb_dmamask = DMA_BIT_MASK(32);
653
654static int get_int_prop(struct device_node *dn, const char *s)
655{
656 int ret;
657 u32 val;
658
659 ret = of_property_read_u32(dn, s, &val);
660 if (ret)
661 return 0;
662 return val;
663}
664
665static int get_musb_port_mode(struct device *dev)
666{
667 enum usb_dr_mode mode;
668
669 mode = usb_get_dr_mode(dev);
670 switch (mode) {
671 case USB_DR_MODE_HOST:
672 return MUSB_PORT_MODE_HOST;
673
674 case USB_DR_MODE_PERIPHERAL:
675 return MUSB_PORT_MODE_GADGET;
676
677 case USB_DR_MODE_UNKNOWN:
678 case USB_DR_MODE_OTG:
679 default:
680 return MUSB_PORT_MODE_DUAL_ROLE;
681 }
682}
683
684static int dsps_create_musb_pdev(struct dsps_glue *glue,
685 struct platform_device *parent)
686{
687 struct musb_hdrc_platform_data pdata;
688 struct resource resources[2];
689 struct resource *res;
690 struct device *dev = &parent->dev;
691 struct musb_hdrc_config *config;
692 struct platform_device *musb;
693 struct device_node *dn = parent->dev.of_node;
694 int ret, val;
695
696 memset(resources, 0, sizeof(resources));
697 res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
698 if (!res) {
699 dev_err(dev, "failed to get memory.\n");
700 return -EINVAL;
701 }
702 resources[0] = *res;
703
704 res = platform_get_resource_byname(parent, IORESOURCE_IRQ, "mc");
705 if (!res) {
706 dev_err(dev, "failed to get irq.\n");
707 return -EINVAL;
708 }
709 resources[1] = *res;
710
711 /* allocate the child platform device */
712 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
713 if (!musb) {
714 dev_err(dev, "failed to allocate musb device\n");
715 return -ENOMEM;
716 }
717
718 musb->dev.parent = dev;
719 musb->dev.dma_mask = &musb_dmamask;
720 musb->dev.coherent_dma_mask = musb_dmamask;
721
722 glue->musb = musb;
723
724 ret = platform_device_add_resources(musb, resources,
725 ARRAY_SIZE(resources));
726 if (ret) {
727 dev_err(dev, "failed to add resources\n");
728 goto err;
729 }
730
731 config = devm_kzalloc(&parent->dev, sizeof(*config), GFP_KERNEL);
732 if (!config) {
733 ret = -ENOMEM;
734 goto err;
735 }
736 pdata.config = config;
737 pdata.platform_ops = &dsps_ops;
738
739 config->num_eps = get_int_prop(dn, "mentor,num-eps");
740 config->ram_bits = get_int_prop(dn, "mentor,ram-bits");
741 config->host_port_deassert_reset_at_resume = 1;
742 pdata.mode = get_musb_port_mode(dev);
743 /* DT keeps this entry in mA, musb expects it as per USB spec */
744 pdata.power = get_int_prop(dn, "mentor,power") / 2;
745
746 ret = of_property_read_u32(dn, "mentor,multipoint", &val);
747 if (!ret && val)
748 config->multipoint = true;
749
750 config->maximum_speed = usb_get_maximum_speed(&parent->dev);
751 switch (config->maximum_speed) {
752 case USB_SPEED_LOW:
753 case USB_SPEED_FULL:
754 break;
755 case USB_SPEED_SUPER:
756 dev_warn(dev, "ignore incorrect maximum_speed "
757 "(super-speed) setting in dts");
758 /* fall through */
759 default:
760 config->maximum_speed = USB_SPEED_HIGH;
761 }
762
763 ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
764 if (ret) {
765 dev_err(dev, "failed to add platform_data\n");
766 goto err;
767 }
768
769 ret = platform_device_add(musb);
770 if (ret) {
771 dev_err(dev, "failed to register musb device\n");
772 goto err;
773 }
774 return 0;
775
776err:
777 platform_device_put(musb);
778 return ret;
779}
780
781static int dsps_probe(struct platform_device *pdev)
782{
783 const struct of_device_id *match;
784 const struct dsps_musb_wrapper *wrp;
785 struct dsps_glue *glue;
786 int ret;
787
788 if (!strcmp(pdev->name, "musb-hdrc"))
789 return -ENODEV;
790
791 match = of_match_node(musb_dsps_of_match, pdev->dev.of_node);
792 if (!match) {
793 dev_err(&pdev->dev, "fail to get matching of_match struct\n");
794 return -EINVAL;
795 }
796 wrp = match->data;
797
798 if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816"))
799 dsps_ops.read_fifo = dsps_read_fifo32;
800
801 /* allocate glue */
802 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
803 if (!glue)
804 return -ENOMEM;
805
806 glue->dev = &pdev->dev;
807 glue->wrp = wrp;
808
809 platform_set_drvdata(pdev, glue);
810 pm_runtime_enable(&pdev->dev);
811
812 ret = pm_runtime_get_sync(&pdev->dev);
813 if (ret < 0) {
814 dev_err(&pdev->dev, "pm_runtime_get_sync FAILED");
815 goto err2;
816 }
817
818 ret = dsps_create_musb_pdev(glue, pdev);
819 if (ret)
820 goto err3;
821
822 return 0;
823
824err3:
825 pm_runtime_put(&pdev->dev);
826err2:
827 pm_runtime_disable(&pdev->dev);
828 return ret;
829}
830
831static int dsps_remove(struct platform_device *pdev)
832{
833 struct dsps_glue *glue = platform_get_drvdata(pdev);
834
835 platform_device_unregister(glue->musb);
836
837 /* disable usbss clocks */
838 pm_runtime_put(&pdev->dev);
839 pm_runtime_disable(&pdev->dev);
840
841 return 0;
842}
843
844static const struct dsps_musb_wrapper am33xx_driver_data = {
845 .revision = 0x00,
846 .control = 0x14,
847 .status = 0x18,
848 .epintr_set = 0x38,
849 .epintr_clear = 0x40,
850 .epintr_status = 0x30,
851 .coreintr_set = 0x3c,
852 .coreintr_clear = 0x44,
853 .coreintr_status = 0x34,
854 .phy_utmi = 0xe0,
855 .mode = 0xe8,
856 .tx_mode = 0x70,
857 .rx_mode = 0x74,
858 .reset = 0,
859 .otg_disable = 21,
860 .iddig = 8,
861 .iddig_mux = 7,
862 .usb_shift = 0,
863 .usb_mask = 0x1ff,
864 .usb_bitmap = (0x1ff << 0),
865 .drvvbus = 8,
866 .txep_shift = 0,
867 .txep_mask = 0xffff,
868 .txep_bitmap = (0xffff << 0),
869 .rxep_shift = 16,
870 .rxep_mask = 0xfffe,
871 .rxep_bitmap = (0xfffe << 16),
872 .poll_timeout = 2000, /* ms */
873};
874
875static const struct of_device_id musb_dsps_of_match[] = {
876 { .compatible = "ti,musb-am33xx",
877 .data = &am33xx_driver_data, },
878 { .compatible = "ti,musb-dm816",
879 .data = &am33xx_driver_data, },
880 { },
881};
882MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
883
884#ifdef CONFIG_PM_SLEEP
885static int dsps_suspend(struct device *dev)
886{
887 struct dsps_glue *glue = dev_get_drvdata(dev);
888 const struct dsps_musb_wrapper *wrp = glue->wrp;
889 struct musb *musb = platform_get_drvdata(glue->musb);
890 void __iomem *mbase;
891
892 del_timer_sync(&glue->timer);
893
894 if (!musb)
895 /* This can happen if the musb device is in -EPROBE_DEFER */
896 return 0;
897
898 mbase = musb->ctrl_base;
899 glue->context.control = dsps_readl(mbase, wrp->control);
900 glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
901 glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
902 glue->context.phy_utmi = dsps_readl(mbase, wrp->phy_utmi);
903 glue->context.mode = dsps_readl(mbase, wrp->mode);
904 glue->context.tx_mode = dsps_readl(mbase, wrp->tx_mode);
905 glue->context.rx_mode = dsps_readl(mbase, wrp->rx_mode);
906
907 return 0;
908}
909
910static int dsps_resume(struct device *dev)
911{
912 struct dsps_glue *glue = dev_get_drvdata(dev);
913 const struct dsps_musb_wrapper *wrp = glue->wrp;
914 struct musb *musb = platform_get_drvdata(glue->musb);
915 void __iomem *mbase;
916
917 if (!musb)
918 return 0;
919
920 mbase = musb->ctrl_base;
921 dsps_writel(mbase, wrp->control, glue->context.control);
922 dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
923 dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
924 dsps_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
925 dsps_writel(mbase, wrp->mode, glue->context.mode);
926 dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
927 dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
928 if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
929 musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
930 mod_timer(&glue->timer, jiffies +
931 msecs_to_jiffies(wrp->poll_timeout));
932
933 return 0;
934}
935#endif
936
937static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
938
939static struct platform_driver dsps_usbss_driver = {
940 .probe = dsps_probe,
941 .remove = dsps_remove,
942 .driver = {
943 .name = "musb-dsps",
944 .pm = &dsps_pm_ops,
945 .of_match_table = musb_dsps_of_match,
946 },
947};
948
949MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer");
950MODULE_AUTHOR("Ravi B <ravibabu@ti.com>");
951MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
952MODULE_LICENSE("GPL v2");
953
954module_platform_driver(dsps_usbss_driver);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Texas Instruments DSPS platforms "glue layer"
4 *
5 * Copyright (C) 2012, by Texas Instruments
6 *
7 * Based on the am35x "glue layer" code.
8 *
9 * This file is part of the Inventra Controller Driver for Linux.
10 *
11 * musb_dsps.c will be a common file for all the TI DSPS platforms
12 * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x.
13 * For now only ti81x is using this and in future davinci.c, am35x.c
14 * da8xx.c would be merged to this file after testing.
15 */
16
17#include <linux/io.h>
18#include <linux/err.h>
19#include <linux/platform_device.h>
20#include <linux/dma-mapping.h>
21#include <linux/pm_runtime.h>
22#include <linux/module.h>
23#include <linux/usb/usb_phy_generic.h>
24#include <linux/platform_data/usb-omap.h>
25#include <linux/sizes.h>
26
27#include <linux/of.h>
28#include <linux/of_device.h>
29#include <linux/of_address.h>
30#include <linux/of_irq.h>
31#include <linux/usb/of.h>
32
33#include <linux/debugfs.h>
34
35#include "musb_core.h"
36
37static const struct of_device_id musb_dsps_of_match[];
38
39/**
40 * DSPS musb wrapper register offset.
41 * FIXME: This should be expanded to have all the wrapper registers from TI DSPS
42 * musb ips.
43 */
44struct dsps_musb_wrapper {
45 u16 revision;
46 u16 control;
47 u16 status;
48 u16 epintr_set;
49 u16 epintr_clear;
50 u16 epintr_status;
51 u16 coreintr_set;
52 u16 coreintr_clear;
53 u16 coreintr_status;
54 u16 phy_utmi;
55 u16 mode;
56 u16 tx_mode;
57 u16 rx_mode;
58
59 /* bit positions for control */
60 unsigned reset:5;
61
62 /* bit positions for interrupt */
63 unsigned usb_shift:5;
64 u32 usb_mask;
65 u32 usb_bitmap;
66 unsigned drvvbus:5;
67
68 unsigned txep_shift:5;
69 u32 txep_mask;
70 u32 txep_bitmap;
71
72 unsigned rxep_shift:5;
73 u32 rxep_mask;
74 u32 rxep_bitmap;
75
76 /* bit positions for phy_utmi */
77 unsigned otg_disable:5;
78
79 /* bit positions for mode */
80 unsigned iddig:5;
81 unsigned iddig_mux:5;
82 /* miscellaneous stuff */
83 unsigned poll_timeout;
84};
85
86/*
87 * register shadow for suspend
88 */
89struct dsps_context {
90 u32 control;
91 u32 epintr;
92 u32 coreintr;
93 u32 phy_utmi;
94 u32 mode;
95 u32 tx_mode;
96 u32 rx_mode;
97};
98
99/**
100 * DSPS glue structure.
101 */
102struct dsps_glue {
103 struct device *dev;
104 struct platform_device *musb; /* child musb pdev */
105 const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
106 int vbus_irq; /* optional vbus irq */
107 unsigned long last_timer; /* last timer data for each instance */
108 bool sw_babble_enabled;
109 void __iomem *usbss_base;
110
111 struct dsps_context context;
112 struct debugfs_regset32 regset;
113 struct dentry *dbgfs_root;
114};
115
116static const struct debugfs_reg32 dsps_musb_regs[] = {
117 { "revision", 0x00 },
118 { "control", 0x14 },
119 { "status", 0x18 },
120 { "eoi", 0x24 },
121 { "intr0_stat", 0x30 },
122 { "intr1_stat", 0x34 },
123 { "intr0_set", 0x38 },
124 { "intr1_set", 0x3c },
125 { "txmode", 0x70 },
126 { "rxmode", 0x74 },
127 { "autoreq", 0xd0 },
128 { "srpfixtime", 0xd4 },
129 { "tdown", 0xd8 },
130 { "phy_utmi", 0xe0 },
131 { "mode", 0xe8 },
132};
133
134static void dsps_mod_timer(struct dsps_glue *glue, int wait_ms)
135{
136 struct musb *musb = platform_get_drvdata(glue->musb);
137 int wait;
138
139 if (wait_ms < 0)
140 wait = msecs_to_jiffies(glue->wrp->poll_timeout);
141 else
142 wait = msecs_to_jiffies(wait_ms);
143
144 mod_timer(&musb->dev_timer, jiffies + wait);
145}
146
147/*
148 * If no vbus irq from the PMIC is configured, we need to poll VBUS status.
149 */
150static void dsps_mod_timer_optional(struct dsps_glue *glue)
151{
152 if (glue->vbus_irq)
153 return;
154
155 dsps_mod_timer(glue, -1);
156}
157
158/* USBSS / USB AM335x */
159#define USBSS_IRQ_STATUS 0x28
160#define USBSS_IRQ_ENABLER 0x2c
161#define USBSS_IRQ_CLEARR 0x30
162
163#define USBSS_IRQ_PD_COMP (1 << 2)
164
165/**
166 * dsps_musb_enable - enable interrupts
167 */
168static void dsps_musb_enable(struct musb *musb)
169{
170 struct device *dev = musb->controller;
171 struct platform_device *pdev = to_platform_device(dev->parent);
172 struct dsps_glue *glue = platform_get_drvdata(pdev);
173 const struct dsps_musb_wrapper *wrp = glue->wrp;
174 void __iomem *reg_base = musb->ctrl_base;
175 u32 epmask, coremask;
176
177 /* Workaround: setup IRQs through both register sets. */
178 epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) |
179 ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
180 coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
181
182 musb_writel(reg_base, wrp->epintr_set, epmask);
183 musb_writel(reg_base, wrp->coreintr_set, coremask);
184 /* start polling for ID change in dual-role idle mode */
185 if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
186 musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
187 dsps_mod_timer(glue, -1);
188}
189
190/**
191 * dsps_musb_disable - disable HDRC and flush interrupts
192 */
193static void dsps_musb_disable(struct musb *musb)
194{
195 struct device *dev = musb->controller;
196 struct platform_device *pdev = to_platform_device(dev->parent);
197 struct dsps_glue *glue = platform_get_drvdata(pdev);
198 const struct dsps_musb_wrapper *wrp = glue->wrp;
199 void __iomem *reg_base = musb->ctrl_base;
200
201 musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
202 musb_writel(reg_base, wrp->epintr_clear,
203 wrp->txep_bitmap | wrp->rxep_bitmap);
204 del_timer_sync(&musb->dev_timer);
205}
206
207/* Caller must take musb->lock */
208static int dsps_check_status(struct musb *musb, void *unused)
209{
210 void __iomem *mregs = musb->mregs;
211 struct device *dev = musb->controller;
212 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
213 const struct dsps_musb_wrapper *wrp = glue->wrp;
214 u8 devctl;
215 int skip_session = 0;
216
217 if (glue->vbus_irq)
218 del_timer(&musb->dev_timer);
219
220 /*
221 * We poll because DSPS IP's won't expose several OTG-critical
222 * status change events (from the transceiver) otherwise.
223 */
224 devctl = musb_readb(mregs, MUSB_DEVCTL);
225 dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
226 usb_otg_state_string(musb->xceiv->otg->state));
227
228 switch (musb->xceiv->otg->state) {
229 case OTG_STATE_A_WAIT_VRISE:
230 dsps_mod_timer_optional(glue);
231 break;
232 case OTG_STATE_A_WAIT_BCON:
233 /* keep VBUS on for host-only mode */
234 if (musb->port_mode == MUSB_PORT_MODE_HOST) {
235 dsps_mod_timer_optional(glue);
236 break;
237 }
238 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
239 skip_session = 1;
240 /* fall */
241
242 case OTG_STATE_A_IDLE:
243 case OTG_STATE_B_IDLE:
244 if (!glue->vbus_irq) {
245 if (devctl & MUSB_DEVCTL_BDEVICE) {
246 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
247 MUSB_DEV_MODE(musb);
248 } else {
249 musb->xceiv->otg->state = OTG_STATE_A_IDLE;
250 MUSB_HST_MODE(musb);
251 }
252 if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
253 musb_writeb(mregs, MUSB_DEVCTL,
254 MUSB_DEVCTL_SESSION);
255 }
256 dsps_mod_timer_optional(glue);
257 break;
258 case OTG_STATE_A_WAIT_VFALL:
259 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
260 musb_writel(musb->ctrl_base, wrp->coreintr_set,
261 MUSB_INTR_VBUSERROR << wrp->usb_shift);
262 break;
263 default:
264 break;
265 }
266
267 return 0;
268}
269
270static void otg_timer(struct timer_list *t)
271{
272 struct musb *musb = from_timer(musb, t, dev_timer);
273 struct device *dev = musb->controller;
274 unsigned long flags;
275 int err;
276
277 err = pm_runtime_get(dev);
278 if ((err != -EINPROGRESS) && err < 0) {
279 dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
280 pm_runtime_put_noidle(dev);
281
282 return;
283 }
284
285 spin_lock_irqsave(&musb->lock, flags);
286 err = musb_queue_resume_work(musb, dsps_check_status, NULL);
287 if (err < 0)
288 dev_err(dev, "%s resume work: %i\n", __func__, err);
289 spin_unlock_irqrestore(&musb->lock, flags);
290 pm_runtime_mark_last_busy(dev);
291 pm_runtime_put_autosuspend(dev);
292}
293
294static void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum)
295{
296 u32 epintr;
297 struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
298 const struct dsps_musb_wrapper *wrp = glue->wrp;
299
300 /* musb->lock might already been held */
301 epintr = (1 << epnum) << wrp->rxep_shift;
302 musb_writel(musb->ctrl_base, wrp->epintr_status, epintr);
303}
304
305static irqreturn_t dsps_interrupt(int irq, void *hci)
306{
307 struct musb *musb = hci;
308 void __iomem *reg_base = musb->ctrl_base;
309 struct device *dev = musb->controller;
310 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
311 const struct dsps_musb_wrapper *wrp = glue->wrp;
312 unsigned long flags;
313 irqreturn_t ret = IRQ_NONE;
314 u32 epintr, usbintr;
315
316 spin_lock_irqsave(&musb->lock, flags);
317
318 /* Get endpoint interrupts */
319 epintr = musb_readl(reg_base, wrp->epintr_status);
320 musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
321 musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
322
323 if (epintr)
324 musb_writel(reg_base, wrp->epintr_status, epintr);
325
326 /* Get usb core interrupts */
327 usbintr = musb_readl(reg_base, wrp->coreintr_status);
328 if (!usbintr && !epintr)
329 goto out;
330
331 musb->int_usb = (usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
332 if (usbintr)
333 musb_writel(reg_base, wrp->coreintr_status, usbintr);
334
335 dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
336 usbintr, epintr);
337
338 if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
339 int drvvbus = musb_readl(reg_base, wrp->status);
340 void __iomem *mregs = musb->mregs;
341 u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
342 int err;
343
344 err = musb->int_usb & MUSB_INTR_VBUSERROR;
345 if (err) {
346 /*
347 * The Mentor core doesn't debounce VBUS as needed
348 * to cope with device connect current spikes. This
349 * means it's not uncommon for bus-powered devices
350 * to get VBUS errors during enumeration.
351 *
352 * This is a workaround, but newer RTL from Mentor
353 * seems to allow a better one: "re"-starting sessions
354 * without waiting for VBUS to stop registering in
355 * devctl.
356 */
357 musb->int_usb &= ~MUSB_INTR_VBUSERROR;
358 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
359 dsps_mod_timer_optional(glue);
360 WARNING("VBUS error workaround (delay coming)\n");
361 } else if (drvvbus) {
362 MUSB_HST_MODE(musb);
363 musb->xceiv->otg->default_a = 1;
364 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
365 dsps_mod_timer_optional(glue);
366 } else {
367 musb->is_active = 0;
368 MUSB_DEV_MODE(musb);
369 musb->xceiv->otg->default_a = 0;
370 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
371 }
372
373 /* NOTE: this must complete power-on within 100 ms. */
374 dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
375 drvvbus ? "on" : "off",
376 usb_otg_state_string(musb->xceiv->otg->state),
377 err ? " ERROR" : "",
378 devctl);
379 ret = IRQ_HANDLED;
380 }
381
382 if (musb->int_tx || musb->int_rx || musb->int_usb)
383 ret |= musb_interrupt(musb);
384
385 /* Poll for ID change and connect */
386 switch (musb->xceiv->otg->state) {
387 case OTG_STATE_B_IDLE:
388 case OTG_STATE_A_WAIT_BCON:
389 dsps_mod_timer_optional(glue);
390 break;
391 default:
392 break;
393 }
394
395out:
396 spin_unlock_irqrestore(&musb->lock, flags);
397
398 return ret;
399}
400
401static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue)
402{
403 struct dentry *root;
404 struct dentry *file;
405 char buf[128];
406
407 sprintf(buf, "%s.dsps", dev_name(musb->controller));
408 root = debugfs_create_dir(buf, NULL);
409 if (!root)
410 return -ENOMEM;
411 glue->dbgfs_root = root;
412
413 glue->regset.regs = dsps_musb_regs;
414 glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs);
415 glue->regset.base = musb->ctrl_base;
416
417 file = debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset);
418 if (!file) {
419 debugfs_remove_recursive(root);
420 return -ENOMEM;
421 }
422 return 0;
423}
424
425static int dsps_musb_init(struct musb *musb)
426{
427 struct device *dev = musb->controller;
428 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
429 struct platform_device *parent = to_platform_device(dev->parent);
430 const struct dsps_musb_wrapper *wrp = glue->wrp;
431 void __iomem *reg_base;
432 struct resource *r;
433 u32 rev, val;
434 int ret;
435
436 r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control");
437 reg_base = devm_ioremap_resource(dev, r);
438 if (IS_ERR(reg_base))
439 return PTR_ERR(reg_base);
440 musb->ctrl_base = reg_base;
441
442 /* NOP driver needs change if supporting dual instance */
443 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0);
444 if (IS_ERR(musb->xceiv))
445 return PTR_ERR(musb->xceiv);
446
447 musb->phy = devm_phy_get(dev->parent, "usb2-phy");
448
449 /* Returns zero if e.g. not clocked */
450 rev = musb_readl(reg_base, wrp->revision);
451 if (!rev)
452 return -ENODEV;
453
454 if (IS_ERR(musb->phy)) {
455 musb->phy = NULL;
456 } else {
457 ret = phy_init(musb->phy);
458 if (ret < 0)
459 return ret;
460 ret = phy_power_on(musb->phy);
461 if (ret) {
462 phy_exit(musb->phy);
463 return ret;
464 }
465 }
466
467 timer_setup(&musb->dev_timer, otg_timer, 0);
468
469 /* Reset the musb */
470 musb_writel(reg_base, wrp->control, (1 << wrp->reset));
471
472 musb->isr = dsps_interrupt;
473
474 /* reset the otgdisable bit, needed for host mode to work */
475 val = musb_readl(reg_base, wrp->phy_utmi);
476 val &= ~(1 << wrp->otg_disable);
477 musb_writel(musb->ctrl_base, wrp->phy_utmi, val);
478
479 /*
480 * Check whether the dsps version has babble control enabled.
481 * In latest silicon revision the babble control logic is enabled.
482 * If MUSB_BABBLE_CTL returns 0x4 then we have the babble control
483 * logic enabled.
484 */
485 val = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
486 if (val & MUSB_BABBLE_RCV_DISABLE) {
487 glue->sw_babble_enabled = true;
488 val |= MUSB_BABBLE_SW_SESSION_CTRL;
489 musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
490 }
491
492 dsps_mod_timer(glue, -1);
493
494 return dsps_musb_dbg_init(musb, glue);
495}
496
497static int dsps_musb_exit(struct musb *musb)
498{
499 struct device *dev = musb->controller;
500 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
501
502 del_timer_sync(&musb->dev_timer);
503 phy_power_off(musb->phy);
504 phy_exit(musb->phy);
505 debugfs_remove_recursive(glue->dbgfs_root);
506
507 return 0;
508}
509
510static int dsps_musb_set_mode(struct musb *musb, u8 mode)
511{
512 struct device *dev = musb->controller;
513 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
514 const struct dsps_musb_wrapper *wrp = glue->wrp;
515 void __iomem *ctrl_base = musb->ctrl_base;
516 u32 reg;
517
518 reg = musb_readl(ctrl_base, wrp->mode);
519
520 switch (mode) {
521 case MUSB_HOST:
522 reg &= ~(1 << wrp->iddig);
523
524 /*
525 * if we're setting mode to host-only or device-only, we're
526 * going to ignore whatever the PHY sends us and just force
527 * ID pin status by SW
528 */
529 reg |= (1 << wrp->iddig_mux);
530
531 musb_writel(ctrl_base, wrp->mode, reg);
532 musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
533 break;
534 case MUSB_PERIPHERAL:
535 reg |= (1 << wrp->iddig);
536
537 /*
538 * if we're setting mode to host-only or device-only, we're
539 * going to ignore whatever the PHY sends us and just force
540 * ID pin status by SW
541 */
542 reg |= (1 << wrp->iddig_mux);
543
544 musb_writel(ctrl_base, wrp->mode, reg);
545 break;
546 case MUSB_OTG:
547 musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
548 break;
549 default:
550 dev_err(glue->dev, "unsupported mode %d\n", mode);
551 return -EINVAL;
552 }
553
554 return 0;
555}
556
557static bool dsps_sw_babble_control(struct musb *musb)
558{
559 u8 babble_ctl;
560 bool session_restart = false;
561
562 babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
563 dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n",
564 babble_ctl);
565 /*
566 * check line monitor flag to check whether babble is
567 * due to noise
568 */
569 dev_dbg(musb->controller, "STUCK_J is %s\n",
570 babble_ctl & MUSB_BABBLE_STUCK_J ? "set" : "reset");
571
572 if (babble_ctl & MUSB_BABBLE_STUCK_J) {
573 int timeout = 10;
574
575 /*
576 * babble is due to noise, then set transmit idle (d7 bit)
577 * to resume normal operation
578 */
579 babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
580 babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE;
581 musb_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
582
583 /* wait till line monitor flag cleared */
584 dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n");
585 do {
586 babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
587 udelay(1);
588 } while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--);
589
590 /* check whether stuck_at_j bit cleared */
591 if (babble_ctl & MUSB_BABBLE_STUCK_J) {
592 /*
593 * real babble condition has occurred
594 * restart the controller to start the
595 * session again
596 */
597 dev_dbg(musb->controller, "J not cleared, misc (%x)\n",
598 babble_ctl);
599 session_restart = true;
600 }
601 } else {
602 session_restart = true;
603 }
604
605 return session_restart;
606}
607
608static int dsps_musb_recover(struct musb *musb)
609{
610 struct device *dev = musb->controller;
611 struct dsps_glue *glue = dev_get_drvdata(dev->parent);
612 int session_restart = 0;
613
614 if (glue->sw_babble_enabled)
615 session_restart = dsps_sw_babble_control(musb);
616 else
617 session_restart = 1;
618
619 return session_restart ? 0 : -EPIPE;
620}
621
622/* Similar to am35x, dm81xx support only 32-bit read operation */
623static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
624{
625 void __iomem *fifo = hw_ep->fifo;
626
627 if (len >= 4) {
628 ioread32_rep(fifo, dst, len >> 2);
629 dst += len & ~0x03;
630 len &= 0x03;
631 }
632
633 /* Read any remaining 1 to 3 bytes */
634 if (len > 0) {
635 u32 val = musb_readl(fifo, 0);
636 memcpy(dst, &val, len);
637 }
638}
639
640#ifdef CONFIG_USB_TI_CPPI41_DMA
641static void dsps_dma_controller_callback(struct dma_controller *c)
642{
643 struct musb *musb = c->musb;
644 struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
645 void __iomem *usbss_base = glue->usbss_base;
646 u32 status;
647
648 status = musb_readl(usbss_base, USBSS_IRQ_STATUS);
649 if (status & USBSS_IRQ_PD_COMP)
650 musb_writel(usbss_base, USBSS_IRQ_STATUS, USBSS_IRQ_PD_COMP);
651}
652
653static struct dma_controller *
654dsps_dma_controller_create(struct musb *musb, void __iomem *base)
655{
656 struct dma_controller *controller;
657 struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
658 void __iomem *usbss_base = glue->usbss_base;
659
660 controller = cppi41_dma_controller_create(musb, base);
661 if (IS_ERR_OR_NULL(controller))
662 return controller;
663
664 musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP);
665 controller->dma_callback = dsps_dma_controller_callback;
666
667 return controller;
668}
669
670static void dsps_dma_controller_destroy(struct dma_controller *c)
671{
672 struct musb *musb = c->musb;
673 struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
674 void __iomem *usbss_base = glue->usbss_base;
675
676 musb_writel(usbss_base, USBSS_IRQ_CLEARR, USBSS_IRQ_PD_COMP);
677 cppi41_dma_controller_destroy(c);
678}
679
680#ifdef CONFIG_PM_SLEEP
681static void dsps_dma_controller_suspend(struct dsps_glue *glue)
682{
683 void __iomem *usbss_base = glue->usbss_base;
684
685 musb_writel(usbss_base, USBSS_IRQ_CLEARR, USBSS_IRQ_PD_COMP);
686}
687
688static void dsps_dma_controller_resume(struct dsps_glue *glue)
689{
690 void __iomem *usbss_base = glue->usbss_base;
691
692 musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP);
693}
694#endif
695#else /* CONFIG_USB_TI_CPPI41_DMA */
696#ifdef CONFIG_PM_SLEEP
697static void dsps_dma_controller_suspend(struct dsps_glue *glue) {}
698static void dsps_dma_controller_resume(struct dsps_glue *glue) {}
699#endif
700#endif /* CONFIG_USB_TI_CPPI41_DMA */
701
702static struct musb_platform_ops dsps_ops = {
703 .quirks = MUSB_DMA_CPPI41 | MUSB_INDEXED_EP,
704 .init = dsps_musb_init,
705 .exit = dsps_musb_exit,
706
707#ifdef CONFIG_USB_TI_CPPI41_DMA
708 .dma_init = dsps_dma_controller_create,
709 .dma_exit = dsps_dma_controller_destroy,
710#endif
711 .enable = dsps_musb_enable,
712 .disable = dsps_musb_disable,
713
714 .set_mode = dsps_musb_set_mode,
715 .recover = dsps_musb_recover,
716 .clear_ep_rxintr = dsps_musb_clear_ep_rxintr,
717};
718
719static u64 musb_dmamask = DMA_BIT_MASK(32);
720
721static int get_int_prop(struct device_node *dn, const char *s)
722{
723 int ret;
724 u32 val;
725
726 ret = of_property_read_u32(dn, s, &val);
727 if (ret)
728 return 0;
729 return val;
730}
731
732static int get_musb_port_mode(struct device *dev)
733{
734 enum usb_dr_mode mode;
735
736 mode = usb_get_dr_mode(dev);
737 switch (mode) {
738 case USB_DR_MODE_HOST:
739 return MUSB_PORT_MODE_HOST;
740
741 case USB_DR_MODE_PERIPHERAL:
742 return MUSB_PORT_MODE_GADGET;
743
744 case USB_DR_MODE_UNKNOWN:
745 case USB_DR_MODE_OTG:
746 default:
747 return MUSB_PORT_MODE_DUAL_ROLE;
748 }
749}
750
751static int dsps_create_musb_pdev(struct dsps_glue *glue,
752 struct platform_device *parent)
753{
754 struct musb_hdrc_platform_data pdata;
755 struct resource resources[2];
756 struct resource *res;
757 struct device *dev = &parent->dev;
758 struct musb_hdrc_config *config;
759 struct platform_device *musb;
760 struct device_node *dn = parent->dev.of_node;
761 int ret, val;
762
763 memset(resources, 0, sizeof(resources));
764 res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
765 if (!res) {
766 dev_err(dev, "failed to get memory.\n");
767 return -EINVAL;
768 }
769 resources[0] = *res;
770
771 res = platform_get_resource_byname(parent, IORESOURCE_IRQ, "mc");
772 if (!res) {
773 dev_err(dev, "failed to get irq.\n");
774 return -EINVAL;
775 }
776 resources[1] = *res;
777
778 /* allocate the child platform device */
779 musb = platform_device_alloc("musb-hdrc",
780 (resources[0].start & 0xFFF) == 0x400 ? 0 : 1);
781 if (!musb) {
782 dev_err(dev, "failed to allocate musb device\n");
783 return -ENOMEM;
784 }
785
786 musb->dev.parent = dev;
787 musb->dev.dma_mask = &musb_dmamask;
788 musb->dev.coherent_dma_mask = musb_dmamask;
789
790 glue->musb = musb;
791
792 ret = platform_device_add_resources(musb, resources,
793 ARRAY_SIZE(resources));
794 if (ret) {
795 dev_err(dev, "failed to add resources\n");
796 goto err;
797 }
798
799 config = devm_kzalloc(&parent->dev, sizeof(*config), GFP_KERNEL);
800 if (!config) {
801 ret = -ENOMEM;
802 goto err;
803 }
804 pdata.config = config;
805 pdata.platform_ops = &dsps_ops;
806
807 config->num_eps = get_int_prop(dn, "mentor,num-eps");
808 config->ram_bits = get_int_prop(dn, "mentor,ram-bits");
809 config->host_port_deassert_reset_at_resume = 1;
810 pdata.mode = get_musb_port_mode(dev);
811 /* DT keeps this entry in mA, musb expects it as per USB spec */
812 pdata.power = get_int_prop(dn, "mentor,power") / 2;
813
814 ret = of_property_read_u32(dn, "mentor,multipoint", &val);
815 if (!ret && val)
816 config->multipoint = true;
817
818 config->maximum_speed = usb_get_maximum_speed(&parent->dev);
819 switch (config->maximum_speed) {
820 case USB_SPEED_LOW:
821 case USB_SPEED_FULL:
822 break;
823 case USB_SPEED_SUPER:
824 dev_warn(dev, "ignore incorrect maximum_speed "
825 "(super-speed) setting in dts");
826 /* fall through */
827 default:
828 config->maximum_speed = USB_SPEED_HIGH;
829 }
830
831 ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
832 if (ret) {
833 dev_err(dev, "failed to add platform_data\n");
834 goto err;
835 }
836
837 ret = platform_device_add(musb);
838 if (ret) {
839 dev_err(dev, "failed to register musb device\n");
840 goto err;
841 }
842 return 0;
843
844err:
845 platform_device_put(musb);
846 return ret;
847}
848
849static irqreturn_t dsps_vbus_threaded_irq(int irq, void *priv)
850{
851 struct dsps_glue *glue = priv;
852 struct musb *musb = platform_get_drvdata(glue->musb);
853
854 if (!musb)
855 return IRQ_NONE;
856
857 dev_dbg(glue->dev, "VBUS interrupt\n");
858 dsps_mod_timer(glue, 0);
859
860 return IRQ_HANDLED;
861}
862
863static int dsps_setup_optional_vbus_irq(struct platform_device *pdev,
864 struct dsps_glue *glue)
865{
866 int error;
867
868 glue->vbus_irq = platform_get_irq_byname(pdev, "vbus");
869 if (glue->vbus_irq == -EPROBE_DEFER)
870 return -EPROBE_DEFER;
871
872 if (glue->vbus_irq <= 0) {
873 glue->vbus_irq = 0;
874 return 0;
875 }
876
877 error = devm_request_threaded_irq(glue->dev, glue->vbus_irq,
878 NULL, dsps_vbus_threaded_irq,
879 IRQF_ONESHOT,
880 "vbus", glue);
881 if (error) {
882 glue->vbus_irq = 0;
883 return error;
884 }
885 dev_dbg(glue->dev, "VBUS irq %i configured\n", glue->vbus_irq);
886
887 return 0;
888}
889
890static int dsps_probe(struct platform_device *pdev)
891{
892 const struct of_device_id *match;
893 const struct dsps_musb_wrapper *wrp;
894 struct dsps_glue *glue;
895 int ret;
896
897 if (!strcmp(pdev->name, "musb-hdrc"))
898 return -ENODEV;
899
900 match = of_match_node(musb_dsps_of_match, pdev->dev.of_node);
901 if (!match) {
902 dev_err(&pdev->dev, "fail to get matching of_match struct\n");
903 return -EINVAL;
904 }
905 wrp = match->data;
906
907 if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816"))
908 dsps_ops.read_fifo = dsps_read_fifo32;
909
910 /* allocate glue */
911 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
912 if (!glue)
913 return -ENOMEM;
914
915 glue->dev = &pdev->dev;
916 glue->wrp = wrp;
917 glue->usbss_base = of_iomap(pdev->dev.parent->of_node, 0);
918 if (!glue->usbss_base)
919 return -ENXIO;
920
921 if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
922 ret = dsps_setup_optional_vbus_irq(pdev, glue);
923 if (ret)
924 goto err_iounmap;
925 }
926
927 platform_set_drvdata(pdev, glue);
928 pm_runtime_enable(&pdev->dev);
929 ret = dsps_create_musb_pdev(glue, pdev);
930 if (ret)
931 goto err;
932
933 return 0;
934
935err:
936 pm_runtime_disable(&pdev->dev);
937err_iounmap:
938 iounmap(glue->usbss_base);
939 return ret;
940}
941
942static int dsps_remove(struct platform_device *pdev)
943{
944 struct dsps_glue *glue = platform_get_drvdata(pdev);
945
946 platform_device_unregister(glue->musb);
947
948 pm_runtime_disable(&pdev->dev);
949 iounmap(glue->usbss_base);
950
951 return 0;
952}
953
954static const struct dsps_musb_wrapper am33xx_driver_data = {
955 .revision = 0x00,
956 .control = 0x14,
957 .status = 0x18,
958 .epintr_set = 0x38,
959 .epintr_clear = 0x40,
960 .epintr_status = 0x30,
961 .coreintr_set = 0x3c,
962 .coreintr_clear = 0x44,
963 .coreintr_status = 0x34,
964 .phy_utmi = 0xe0,
965 .mode = 0xe8,
966 .tx_mode = 0x70,
967 .rx_mode = 0x74,
968 .reset = 0,
969 .otg_disable = 21,
970 .iddig = 8,
971 .iddig_mux = 7,
972 .usb_shift = 0,
973 .usb_mask = 0x1ff,
974 .usb_bitmap = (0x1ff << 0),
975 .drvvbus = 8,
976 .txep_shift = 0,
977 .txep_mask = 0xffff,
978 .txep_bitmap = (0xffff << 0),
979 .rxep_shift = 16,
980 .rxep_mask = 0xfffe,
981 .rxep_bitmap = (0xfffe << 16),
982 .poll_timeout = 2000, /* ms */
983};
984
985static const struct of_device_id musb_dsps_of_match[] = {
986 { .compatible = "ti,musb-am33xx",
987 .data = &am33xx_driver_data, },
988 { .compatible = "ti,musb-dm816",
989 .data = &am33xx_driver_data, },
990 { },
991};
992MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
993
994#ifdef CONFIG_PM_SLEEP
995static int dsps_suspend(struct device *dev)
996{
997 struct dsps_glue *glue = dev_get_drvdata(dev);
998 const struct dsps_musb_wrapper *wrp = glue->wrp;
999 struct musb *musb = platform_get_drvdata(glue->musb);
1000 void __iomem *mbase;
1001 int ret;
1002
1003 if (!musb)
1004 /* This can happen if the musb device is in -EPROBE_DEFER */
1005 return 0;
1006
1007 ret = pm_runtime_get_sync(dev);
1008 if (ret < 0) {
1009 pm_runtime_put_noidle(dev);
1010 return ret;
1011 }
1012
1013 del_timer_sync(&musb->dev_timer);
1014
1015 mbase = musb->ctrl_base;
1016 glue->context.control = musb_readl(mbase, wrp->control);
1017 glue->context.epintr = musb_readl(mbase, wrp->epintr_set);
1018 glue->context.coreintr = musb_readl(mbase, wrp->coreintr_set);
1019 glue->context.phy_utmi = musb_readl(mbase, wrp->phy_utmi);
1020 glue->context.mode = musb_readl(mbase, wrp->mode);
1021 glue->context.tx_mode = musb_readl(mbase, wrp->tx_mode);
1022 glue->context.rx_mode = musb_readl(mbase, wrp->rx_mode);
1023
1024 dsps_dma_controller_suspend(glue);
1025
1026 return 0;
1027}
1028
1029static int dsps_resume(struct device *dev)
1030{
1031 struct dsps_glue *glue = dev_get_drvdata(dev);
1032 const struct dsps_musb_wrapper *wrp = glue->wrp;
1033 struct musb *musb = platform_get_drvdata(glue->musb);
1034 void __iomem *mbase;
1035
1036 if (!musb)
1037 return 0;
1038
1039 dsps_dma_controller_resume(glue);
1040
1041 mbase = musb->ctrl_base;
1042 musb_writel(mbase, wrp->control, glue->context.control);
1043 musb_writel(mbase, wrp->epintr_set, glue->context.epintr);
1044 musb_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
1045 musb_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
1046 musb_writel(mbase, wrp->mode, glue->context.mode);
1047 musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
1048 musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
1049 if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
1050 musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
1051 dsps_mod_timer(glue, -1);
1052
1053 pm_runtime_put(dev);
1054
1055 return 0;
1056}
1057#endif
1058
1059static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
1060
1061static struct platform_driver dsps_usbss_driver = {
1062 .probe = dsps_probe,
1063 .remove = dsps_remove,
1064 .driver = {
1065 .name = "musb-dsps",
1066 .pm = &dsps_pm_ops,
1067 .of_match_table = musb_dsps_of_match,
1068 },
1069};
1070
1071MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer");
1072MODULE_AUTHOR("Ravi B <ravibabu@ti.com>");
1073MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
1074MODULE_LICENSE("GPL v2");
1075
1076module_platform_driver(dsps_usbss_driver);