1
 2config DRM_MSM
 3	tristate "MSM DRM"
 4	depends on DRM
 5	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
 6	depends on OF && COMMON_CLK
 
 
 7	select REGULATOR
 8	select DRM_KMS_HELPER
 9	select DRM_PANEL
10	select SHMEM
11	select TMPFS
12	select QCOM_SCM
 
 
 
13	default y
14	help
15	  DRM/KMS driver for MSM/snapdragon.
16
17config DRM_MSM_REGISTER_LOGGING
18	bool "MSM DRM register logging"
19	depends on DRM_MSM
20	default n
21	help
22	  Compile in support for logging register reads/writes in a format
23	  that can be parsed by envytools demsm tool.  If enabled, register
24	  logging can be switched on via msm.reglog=y module param.
25
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
26config DRM_MSM_DSI
27	bool "Enable DSI support in MSM DRM driver"
28	depends on DRM_MSM
29	select DRM_PANEL
30	select DRM_MIPI_DSI
31	default y
32	help
33	  Choose this option if you have a need for MIPI DSI connector
34	  support.
35
36config DRM_MSM_DSI_PLL
37	bool "Enable DSI PLL driver in MSM DRM"
38	depends on DRM_MSM_DSI && COMMON_CLK
39	default y
40	help
41	  Choose this option to enable DSI PLL driver which provides DSI
42	  source clocks under common clock framework.
43
44config DRM_MSM_DSI_28NM_PHY
45	bool "Enable DSI 28nm PHY driver in MSM DRM"
46	depends on DRM_MSM_DSI
47	default y
48	help
49	  Choose this option if the 28nm DSI PHY is used on the platform.
50
51config DRM_MSM_DSI_20NM_PHY
52	bool "Enable DSI 20nm PHY driver in MSM DRM"
53	depends on DRM_MSM_DSI
54	default y
55	help
56	  Choose this option if the 20nm DSI PHY is used on the platform.
57
58config DRM_MSM_DSI_28NM_8960_PHY
59	bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
60	depends on DRM_MSM_DSI
61	default y
62	help
63	  Choose this option if the 28nm DSI PHY 8960 variant is used on the
64	  platform.

  1
  2config DRM_MSM
  3	tristate "MSM DRM"
  4	depends on DRM
  5	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
  6	depends on OF && COMMON_CLK
  7	depends on MMU
  8	select QCOM_MDT_LOADER if ARCH_QCOM
  9	select REGULATOR
 10	select DRM_KMS_HELPER
 11	select DRM_PANEL
 12	select SHMEM
 13	select TMPFS
 14	select QCOM_SCM
 15	select SND_SOC_HDMI_CODEC if SND_SOC
 16	select SYNC_FILE
 17	select PM_OPP
 18	default y
 19	help
 20	  DRM/KMS driver for MSM/snapdragon.
 21
 22config DRM_MSM_REGISTER_LOGGING
 23	bool "MSM DRM register logging"
 24	depends on DRM_MSM
 25	default n
 26	help
 27	  Compile in support for logging register reads/writes in a format
 28	  that can be parsed by envytools demsm tool.  If enabled, register
 29	  logging can be switched on via msm.reglog=y module param.
 30
 31config DRM_MSM_GPU_SUDO
 32	bool "Enable SUDO flag on submits"
 33	depends on DRM_MSM && EXPERT
 34	default n
 35	help
 36	  Enable userspace that has CAP_SYS_RAWIO to submit GPU commands
 37	  that are run from RB instead of IB1.  This essentially gives
 38	  userspace kernel level access, but is useful for firmware
 39	  debugging.
 40
 41	  Only use this if you are a driver developer.  This should *not*
 42	  be enabled for production kernels.  If unsure, say N.
 43
 44config DRM_MSM_HDMI_HDCP
 45	bool "Enable HDMI HDCP support in MSM DRM driver"
 46	depends on DRM_MSM && QCOM_SCM
 47	default y
 48	help
 49	  Choose this option to enable HDCP state machine
 50
 51config DRM_MSM_DSI
 52	bool "Enable DSI support in MSM DRM driver"
 53	depends on DRM_MSM
 54	select DRM_PANEL
 55	select DRM_MIPI_DSI
 56	default y
 57	help
 58	  Choose this option if you have a need for MIPI DSI connector
 59	  support.
 60
 61config DRM_MSM_DSI_PLL
 62	bool "Enable DSI PLL driver in MSM DRM"
 63	depends on DRM_MSM_DSI && COMMON_CLK
 64	default y
 65	help
 66	  Choose this option to enable DSI PLL driver which provides DSI
 67	  source clocks under common clock framework.
 68
 69config DRM_MSM_DSI_28NM_PHY
 70	bool "Enable DSI 28nm PHY driver in MSM DRM"
 71	depends on DRM_MSM_DSI
 72	default y
 73	help
 74	  Choose this option if the 28nm DSI PHY is used on the platform.
 75
 76config DRM_MSM_DSI_20NM_PHY
 77	bool "Enable DSI 20nm PHY driver in MSM DRM"
 78	depends on DRM_MSM_DSI
 79	default y
 80	help
 81	  Choose this option if the 20nm DSI PHY is used on the platform.
 82
 83config DRM_MSM_DSI_28NM_8960_PHY
 84	bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
 85	depends on DRM_MSM_DSI
 86	default y
 87	help
 88	  Choose this option if the 28nm DSI PHY 8960 variant is used on the
 89	  platform.
 90
 91config DRM_MSM_DSI_14NM_PHY
 92	bool "Enable DSI 14nm PHY driver in MSM DRM (used by MSM8996/APQ8096)"
 93	depends on DRM_MSM_DSI
 94	default y
 95	help
 96	  Choose this option if DSI PHY on 8996 is used on the platform.
 97
 98config DRM_MSM_DSI_10NM_PHY
 99	bool "Enable DSI 10nm PHY driver in MSM DRM (used by SDM845)"
100	depends on DRM_MSM_DSI
101	default y
102	help
103	  Choose this option if DSI PHY on SDM845 is used on the platform.