Loading...
1/*
2 * Copyright (c) 2006-2009 Red Hat Inc.
3 * Copyright (c) 2006-2008 Intel Corporation
4 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
5 *
6 * DRM framebuffer helper functions
7 *
8 * Permission to use, copy, modify, distribute, and sell this software and its
9 * documentation for any purpose is hereby granted without fee, provided that
10 * the above copyright notice appear in all copies and that both that copyright
11 * notice and this permission notice appear in supporting documentation, and
12 * that the name of the copyright holders not be used in advertising or
13 * publicity pertaining to distribution of the software without specific,
14 * written prior permission. The copyright holders make no representations
15 * about the suitability of this software for any purpose. It is provided "as
16 * is" without express or implied warranty.
17 *
18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
24 * OF THIS SOFTWARE.
25 *
26 * Authors:
27 * Dave Airlie <airlied@linux.ie>
28 * Jesse Barnes <jesse.barnes@intel.com>
29 */
30#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
31
32#include <linux/kernel.h>
33#include <linux/sysrq.h>
34#include <linux/slab.h>
35#include <linux/fb.h>
36#include <linux/module.h>
37#include <drm/drmP.h>
38#include <drm/drm_crtc.h>
39#include <drm/drm_fb_helper.h>
40#include <drm/drm_crtc_helper.h>
41#include <drm/drm_atomic.h>
42#include <drm/drm_atomic_helper.h>
43
44static bool drm_fbdev_emulation = true;
45module_param_named(fbdev_emulation, drm_fbdev_emulation, bool, 0600);
46MODULE_PARM_DESC(fbdev_emulation,
47 "Enable legacy fbdev emulation [default=true]");
48
49static LIST_HEAD(kernel_fb_helper_list);
50
51/**
52 * DOC: fbdev helpers
53 *
54 * The fb helper functions are useful to provide an fbdev on top of a drm kernel
55 * mode setting driver. They can be used mostly independently from the crtc
56 * helper functions used by many drivers to implement the kernel mode setting
57 * interfaces.
58 *
59 * Initialization is done as a four-step process with drm_fb_helper_prepare(),
60 * drm_fb_helper_init(), drm_fb_helper_single_add_all_connectors() and
61 * drm_fb_helper_initial_config(). Drivers with fancier requirements than the
62 * default behaviour can override the third step with their own code.
63 * Teardown is done with drm_fb_helper_fini().
64 *
65 * At runtime drivers should restore the fbdev console by calling
66 * drm_fb_helper_restore_fbdev_mode_unlocked() from their ->lastclose callback.
67 * They should also notify the fb helper code from updates to the output
68 * configuration by calling drm_fb_helper_hotplug_event(). For easier
69 * integration with the output polling code in drm_crtc_helper.c the modeset
70 * code provides a ->output_poll_changed callback.
71 *
72 * All other functions exported by the fb helper library can be used to
73 * implement the fbdev driver interface by the driver.
74 *
75 * It is possible, though perhaps somewhat tricky, to implement race-free
76 * hotplug detection using the fbdev helpers. The drm_fb_helper_prepare()
77 * helper must be called first to initialize the minimum required to make
78 * hotplug detection work. Drivers also need to make sure to properly set up
79 * the dev->mode_config.funcs member. After calling drm_kms_helper_poll_init()
80 * it is safe to enable interrupts and start processing hotplug events. At the
81 * same time, drivers should initialize all modeset objects such as CRTCs,
82 * encoders and connectors. To finish up the fbdev helper initialization, the
83 * drm_fb_helper_init() function is called. To probe for all attached displays
84 * and set up an initial configuration using the detected hardware, drivers
85 * should call drm_fb_helper_single_add_all_connectors() followed by
86 * drm_fb_helper_initial_config().
87 */
88
89/**
90 * drm_fb_helper_single_add_all_connectors() - add all connectors to fbdev
91 * emulation helper
92 * @fb_helper: fbdev initialized with drm_fb_helper_init
93 *
94 * This functions adds all the available connectors for use with the given
95 * fb_helper. This is a separate step to allow drivers to freely assign
96 * connectors to the fbdev, e.g. if some are reserved for special purposes or
97 * not adequate to be used for the fbcon.
98 *
99 * This function is protected against concurrent connector hotadds/removals
100 * using drm_fb_helper_add_one_connector() and
101 * drm_fb_helper_remove_one_connector().
102 */
103int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper)
104{
105 struct drm_device *dev = fb_helper->dev;
106 struct drm_connector *connector;
107 int i, ret;
108
109 if (!drm_fbdev_emulation)
110 return 0;
111
112 mutex_lock(&dev->mode_config.mutex);
113 drm_for_each_connector(connector, dev) {
114 ret = drm_fb_helper_add_one_connector(fb_helper, connector);
115
116 if (ret)
117 goto fail;
118 }
119 mutex_unlock(&dev->mode_config.mutex);
120 return 0;
121fail:
122 for (i = 0; i < fb_helper->connector_count; i++) {
123 kfree(fb_helper->connector_info[i]);
124 fb_helper->connector_info[i] = NULL;
125 }
126 fb_helper->connector_count = 0;
127 mutex_unlock(&dev->mode_config.mutex);
128
129 return ret;
130}
131EXPORT_SYMBOL(drm_fb_helper_single_add_all_connectors);
132
133int drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper, struct drm_connector *connector)
134{
135 struct drm_fb_helper_connector **temp;
136 struct drm_fb_helper_connector *fb_helper_connector;
137
138 if (!drm_fbdev_emulation)
139 return 0;
140
141 WARN_ON(!mutex_is_locked(&fb_helper->dev->mode_config.mutex));
142 if (fb_helper->connector_count + 1 > fb_helper->connector_info_alloc_count) {
143 temp = krealloc(fb_helper->connector_info, sizeof(struct drm_fb_helper_connector *) * (fb_helper->connector_count + 1), GFP_KERNEL);
144 if (!temp)
145 return -ENOMEM;
146
147 fb_helper->connector_info_alloc_count = fb_helper->connector_count + 1;
148 fb_helper->connector_info = temp;
149 }
150
151
152 fb_helper_connector = kzalloc(sizeof(struct drm_fb_helper_connector), GFP_KERNEL);
153 if (!fb_helper_connector)
154 return -ENOMEM;
155
156 fb_helper_connector->connector = connector;
157 fb_helper->connector_info[fb_helper->connector_count++] = fb_helper_connector;
158 return 0;
159}
160EXPORT_SYMBOL(drm_fb_helper_add_one_connector);
161
162static void remove_from_modeset(struct drm_mode_set *set,
163 struct drm_connector *connector)
164{
165 int i, j;
166
167 for (i = 0; i < set->num_connectors; i++) {
168 if (set->connectors[i] == connector)
169 break;
170 }
171
172 if (i == set->num_connectors)
173 return;
174
175 for (j = i + 1; j < set->num_connectors; j++) {
176 set->connectors[j - 1] = set->connectors[j];
177 }
178 set->num_connectors--;
179
180 /*
181 * TODO maybe need to makes sure we set it back to !=NULL somewhere?
182 */
183 if (set->num_connectors == 0) {
184 set->fb = NULL;
185 drm_mode_destroy(connector->dev, set->mode);
186 set->mode = NULL;
187 }
188}
189
190int drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper,
191 struct drm_connector *connector)
192{
193 struct drm_fb_helper_connector *fb_helper_connector;
194 int i, j;
195
196 if (!drm_fbdev_emulation)
197 return 0;
198
199 WARN_ON(!mutex_is_locked(&fb_helper->dev->mode_config.mutex));
200
201 for (i = 0; i < fb_helper->connector_count; i++) {
202 if (fb_helper->connector_info[i]->connector == connector)
203 break;
204 }
205
206 if (i == fb_helper->connector_count)
207 return -EINVAL;
208 fb_helper_connector = fb_helper->connector_info[i];
209
210 for (j = i + 1; j < fb_helper->connector_count; j++) {
211 fb_helper->connector_info[j - 1] = fb_helper->connector_info[j];
212 }
213 fb_helper->connector_count--;
214 kfree(fb_helper_connector);
215
216 /* also cleanup dangling references to the connector: */
217 for (i = 0; i < fb_helper->crtc_count; i++)
218 remove_from_modeset(&fb_helper->crtc_info[i].mode_set, connector);
219
220 return 0;
221}
222EXPORT_SYMBOL(drm_fb_helper_remove_one_connector);
223
224static void drm_fb_helper_save_lut_atomic(struct drm_crtc *crtc, struct drm_fb_helper *helper)
225{
226 uint16_t *r_base, *g_base, *b_base;
227 int i;
228
229 if (helper->funcs->gamma_get == NULL)
230 return;
231
232 r_base = crtc->gamma_store;
233 g_base = r_base + crtc->gamma_size;
234 b_base = g_base + crtc->gamma_size;
235
236 for (i = 0; i < crtc->gamma_size; i++)
237 helper->funcs->gamma_get(crtc, &r_base[i], &g_base[i], &b_base[i], i);
238}
239
240static void drm_fb_helper_restore_lut_atomic(struct drm_crtc *crtc)
241{
242 uint16_t *r_base, *g_base, *b_base;
243
244 if (crtc->funcs->gamma_set == NULL)
245 return;
246
247 r_base = crtc->gamma_store;
248 g_base = r_base + crtc->gamma_size;
249 b_base = g_base + crtc->gamma_size;
250
251 crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, 0, crtc->gamma_size);
252}
253
254/**
255 * drm_fb_helper_debug_enter - implementation for ->fb_debug_enter
256 * @info: fbdev registered by the helper
257 */
258int drm_fb_helper_debug_enter(struct fb_info *info)
259{
260 struct drm_fb_helper *helper = info->par;
261 const struct drm_crtc_helper_funcs *funcs;
262 int i;
263
264 list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
265 for (i = 0; i < helper->crtc_count; i++) {
266 struct drm_mode_set *mode_set =
267 &helper->crtc_info[i].mode_set;
268
269 if (!mode_set->crtc->enabled)
270 continue;
271
272 funcs = mode_set->crtc->helper_private;
273 drm_fb_helper_save_lut_atomic(mode_set->crtc, helper);
274 funcs->mode_set_base_atomic(mode_set->crtc,
275 mode_set->fb,
276 mode_set->x,
277 mode_set->y,
278 ENTER_ATOMIC_MODE_SET);
279 }
280 }
281
282 return 0;
283}
284EXPORT_SYMBOL(drm_fb_helper_debug_enter);
285
286/* Find the real fb for a given fb helper CRTC */
287static struct drm_framebuffer *drm_mode_config_fb(struct drm_crtc *crtc)
288{
289 struct drm_device *dev = crtc->dev;
290 struct drm_crtc *c;
291
292 drm_for_each_crtc(c, dev) {
293 if (crtc->base.id == c->base.id)
294 return c->primary->fb;
295 }
296
297 return NULL;
298}
299
300/**
301 * drm_fb_helper_debug_leave - implementation for ->fb_debug_leave
302 * @info: fbdev registered by the helper
303 */
304int drm_fb_helper_debug_leave(struct fb_info *info)
305{
306 struct drm_fb_helper *helper = info->par;
307 struct drm_crtc *crtc;
308 const struct drm_crtc_helper_funcs *funcs;
309 struct drm_framebuffer *fb;
310 int i;
311
312 for (i = 0; i < helper->crtc_count; i++) {
313 struct drm_mode_set *mode_set = &helper->crtc_info[i].mode_set;
314 crtc = mode_set->crtc;
315 funcs = crtc->helper_private;
316 fb = drm_mode_config_fb(crtc);
317
318 if (!crtc->enabled)
319 continue;
320
321 if (!fb) {
322 DRM_ERROR("no fb to restore??\n");
323 continue;
324 }
325
326 drm_fb_helper_restore_lut_atomic(mode_set->crtc);
327 funcs->mode_set_base_atomic(mode_set->crtc, fb, crtc->x,
328 crtc->y, LEAVE_ATOMIC_MODE_SET);
329 }
330
331 return 0;
332}
333EXPORT_SYMBOL(drm_fb_helper_debug_leave);
334
335static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper)
336{
337 struct drm_device *dev = fb_helper->dev;
338 struct drm_plane *plane;
339 struct drm_atomic_state *state;
340 int i, ret;
341 unsigned plane_mask;
342
343 state = drm_atomic_state_alloc(dev);
344 if (!state)
345 return -ENOMEM;
346
347 state->acquire_ctx = dev->mode_config.acquire_ctx;
348retry:
349 plane_mask = 0;
350 drm_for_each_plane(plane, dev) {
351 struct drm_plane_state *plane_state;
352
353 plane_state = drm_atomic_get_plane_state(state, plane);
354 if (IS_ERR(plane_state)) {
355 ret = PTR_ERR(plane_state);
356 goto fail;
357 }
358
359 plane_state->rotation = BIT(DRM_ROTATE_0);
360
361 plane->old_fb = plane->fb;
362 plane_mask |= 1 << drm_plane_index(plane);
363
364 /* disable non-primary: */
365 if (plane->type == DRM_PLANE_TYPE_PRIMARY)
366 continue;
367
368 ret = __drm_atomic_helper_disable_plane(plane, plane_state);
369 if (ret != 0)
370 goto fail;
371 }
372
373 for(i = 0; i < fb_helper->crtc_count; i++) {
374 struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
375
376 ret = __drm_atomic_helper_set_config(mode_set, state);
377 if (ret != 0)
378 goto fail;
379 }
380
381 ret = drm_atomic_commit(state);
382
383fail:
384 drm_atomic_clean_old_fb(dev, plane_mask, ret);
385
386 if (ret == -EDEADLK)
387 goto backoff;
388
389 if (ret != 0)
390 drm_atomic_state_free(state);
391
392 return ret;
393
394backoff:
395 drm_atomic_state_clear(state);
396 drm_atomic_legacy_backoff(state);
397
398 goto retry;
399}
400
401static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
402{
403 struct drm_device *dev = fb_helper->dev;
404 struct drm_plane *plane;
405 int i;
406
407 drm_warn_on_modeset_not_all_locked(dev);
408
409 if (fb_helper->atomic)
410 return restore_fbdev_mode_atomic(fb_helper);
411
412 drm_for_each_plane(plane, dev) {
413 if (plane->type != DRM_PLANE_TYPE_PRIMARY)
414 drm_plane_force_disable(plane);
415
416 if (dev->mode_config.rotation_property) {
417 drm_mode_plane_set_obj_prop(plane,
418 dev->mode_config.rotation_property,
419 BIT(DRM_ROTATE_0));
420 }
421 }
422
423 for (i = 0; i < fb_helper->crtc_count; i++) {
424 struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
425 struct drm_crtc *crtc = mode_set->crtc;
426 int ret;
427
428 if (crtc->funcs->cursor_set2) {
429 ret = crtc->funcs->cursor_set2(crtc, NULL, 0, 0, 0, 0, 0);
430 if (ret)
431 return ret;
432 } else if (crtc->funcs->cursor_set) {
433 ret = crtc->funcs->cursor_set(crtc, NULL, 0, 0, 0);
434 if (ret)
435 return ret;
436 }
437
438 ret = drm_mode_set_config_internal(mode_set);
439 if (ret)
440 return ret;
441 }
442
443 return 0;
444}
445
446/**
447 * drm_fb_helper_restore_fbdev_mode_unlocked - restore fbdev configuration
448 * @fb_helper: fbcon to restore
449 *
450 * This should be called from driver's drm ->lastclose callback
451 * when implementing an fbcon on top of kms using this helper. This ensures that
452 * the user isn't greeted with a black screen when e.g. X dies.
453 *
454 * RETURNS:
455 * Zero if everything went ok, negative error code otherwise.
456 */
457int drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper)
458{
459 struct drm_device *dev = fb_helper->dev;
460 bool do_delayed;
461 int ret;
462
463 if (!drm_fbdev_emulation)
464 return -ENODEV;
465
466 drm_modeset_lock_all(dev);
467 ret = restore_fbdev_mode(fb_helper);
468
469 do_delayed = fb_helper->delayed_hotplug;
470 if (do_delayed)
471 fb_helper->delayed_hotplug = false;
472 drm_modeset_unlock_all(dev);
473
474 if (do_delayed)
475 drm_fb_helper_hotplug_event(fb_helper);
476 return ret;
477}
478EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode_unlocked);
479
480static bool drm_fb_helper_is_bound(struct drm_fb_helper *fb_helper)
481{
482 struct drm_device *dev = fb_helper->dev;
483 struct drm_crtc *crtc;
484 int bound = 0, crtcs_bound = 0;
485
486 /* Sometimes user space wants everything disabled, so don't steal the
487 * display if there's a master. */
488 if (dev->primary->master)
489 return false;
490
491 drm_for_each_crtc(crtc, dev) {
492 if (crtc->primary->fb)
493 crtcs_bound++;
494 if (crtc->primary->fb == fb_helper->fb)
495 bound++;
496 }
497
498 if (bound < crtcs_bound)
499 return false;
500
501 return true;
502}
503
504#ifdef CONFIG_MAGIC_SYSRQ
505/*
506 * restore fbcon display for all kms driver's using this helper, used for sysrq
507 * and panic handling.
508 */
509static bool drm_fb_helper_force_kernel_mode(void)
510{
511 bool ret, error = false;
512 struct drm_fb_helper *helper;
513
514 if (list_empty(&kernel_fb_helper_list))
515 return false;
516
517 list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
518 struct drm_device *dev = helper->dev;
519
520 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
521 continue;
522
523 drm_modeset_lock_all(dev);
524 ret = restore_fbdev_mode(helper);
525 if (ret)
526 error = true;
527 drm_modeset_unlock_all(dev);
528 }
529 return error;
530}
531
532static void drm_fb_helper_restore_work_fn(struct work_struct *ignored)
533{
534 bool ret;
535 ret = drm_fb_helper_force_kernel_mode();
536 if (ret == true)
537 DRM_ERROR("Failed to restore crtc configuration\n");
538}
539static DECLARE_WORK(drm_fb_helper_restore_work, drm_fb_helper_restore_work_fn);
540
541static void drm_fb_helper_sysrq(int dummy1)
542{
543 schedule_work(&drm_fb_helper_restore_work);
544}
545
546static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = {
547 .handler = drm_fb_helper_sysrq,
548 .help_msg = "force-fb(V)",
549 .action_msg = "Restore framebuffer console",
550};
551#else
552static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = { };
553#endif
554
555static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode)
556{
557 struct drm_fb_helper *fb_helper = info->par;
558 struct drm_device *dev = fb_helper->dev;
559 struct drm_crtc *crtc;
560 struct drm_connector *connector;
561 int i, j;
562
563 /*
564 * For each CRTC in this fb, turn the connectors on/off.
565 */
566 drm_modeset_lock_all(dev);
567 if (!drm_fb_helper_is_bound(fb_helper)) {
568 drm_modeset_unlock_all(dev);
569 return;
570 }
571
572 for (i = 0; i < fb_helper->crtc_count; i++) {
573 crtc = fb_helper->crtc_info[i].mode_set.crtc;
574
575 if (!crtc->enabled)
576 continue;
577
578 /* Walk the connectors & encoders on this fb turning them on/off */
579 for (j = 0; j < fb_helper->connector_count; j++) {
580 connector = fb_helper->connector_info[j]->connector;
581 connector->funcs->dpms(connector, dpms_mode);
582 drm_object_property_set_value(&connector->base,
583 dev->mode_config.dpms_property, dpms_mode);
584 }
585 }
586 drm_modeset_unlock_all(dev);
587}
588
589/**
590 * drm_fb_helper_blank - implementation for ->fb_blank
591 * @blank: desired blanking state
592 * @info: fbdev registered by the helper
593 */
594int drm_fb_helper_blank(int blank, struct fb_info *info)
595{
596 if (oops_in_progress)
597 return -EBUSY;
598
599 switch (blank) {
600 /* Display: On; HSync: On, VSync: On */
601 case FB_BLANK_UNBLANK:
602 drm_fb_helper_dpms(info, DRM_MODE_DPMS_ON);
603 break;
604 /* Display: Off; HSync: On, VSync: On */
605 case FB_BLANK_NORMAL:
606 drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
607 break;
608 /* Display: Off; HSync: Off, VSync: On */
609 case FB_BLANK_HSYNC_SUSPEND:
610 drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
611 break;
612 /* Display: Off; HSync: On, VSync: Off */
613 case FB_BLANK_VSYNC_SUSPEND:
614 drm_fb_helper_dpms(info, DRM_MODE_DPMS_SUSPEND);
615 break;
616 /* Display: Off; HSync: Off, VSync: Off */
617 case FB_BLANK_POWERDOWN:
618 drm_fb_helper_dpms(info, DRM_MODE_DPMS_OFF);
619 break;
620 }
621 return 0;
622}
623EXPORT_SYMBOL(drm_fb_helper_blank);
624
625static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper)
626{
627 int i;
628
629 for (i = 0; i < helper->connector_count; i++)
630 kfree(helper->connector_info[i]);
631 kfree(helper->connector_info);
632 for (i = 0; i < helper->crtc_count; i++) {
633 kfree(helper->crtc_info[i].mode_set.connectors);
634 if (helper->crtc_info[i].mode_set.mode)
635 drm_mode_destroy(helper->dev, helper->crtc_info[i].mode_set.mode);
636 }
637 kfree(helper->crtc_info);
638}
639
640/**
641 * drm_fb_helper_prepare - setup a drm_fb_helper structure
642 * @dev: DRM device
643 * @helper: driver-allocated fbdev helper structure to set up
644 * @funcs: pointer to structure of functions associate with this helper
645 *
646 * Sets up the bare minimum to make the framebuffer helper usable. This is
647 * useful to implement race-free initialization of the polling helpers.
648 */
649void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
650 const struct drm_fb_helper_funcs *funcs)
651{
652 INIT_LIST_HEAD(&helper->kernel_fb_list);
653 helper->funcs = funcs;
654 helper->dev = dev;
655}
656EXPORT_SYMBOL(drm_fb_helper_prepare);
657
658/**
659 * drm_fb_helper_init - initialize a drm_fb_helper structure
660 * @dev: drm device
661 * @fb_helper: driver-allocated fbdev helper structure to initialize
662 * @crtc_count: maximum number of crtcs to support in this fbdev emulation
663 * @max_conn_count: max connector count
664 *
665 * This allocates the structures for the fbdev helper with the given limits.
666 * Note that this won't yet touch the hardware (through the driver interfaces)
667 * nor register the fbdev. This is only done in drm_fb_helper_initial_config()
668 * to allow driver writes more control over the exact init sequence.
669 *
670 * Drivers must call drm_fb_helper_prepare() before calling this function.
671 *
672 * RETURNS:
673 * Zero if everything went ok, nonzero otherwise.
674 */
675int drm_fb_helper_init(struct drm_device *dev,
676 struct drm_fb_helper *fb_helper,
677 int crtc_count, int max_conn_count)
678{
679 struct drm_crtc *crtc;
680 int i;
681
682 if (!drm_fbdev_emulation)
683 return 0;
684
685 if (!max_conn_count)
686 return -EINVAL;
687
688 fb_helper->crtc_info = kcalloc(crtc_count, sizeof(struct drm_fb_helper_crtc), GFP_KERNEL);
689 if (!fb_helper->crtc_info)
690 return -ENOMEM;
691
692 fb_helper->crtc_count = crtc_count;
693 fb_helper->connector_info = kcalloc(dev->mode_config.num_connector, sizeof(struct drm_fb_helper_connector *), GFP_KERNEL);
694 if (!fb_helper->connector_info) {
695 kfree(fb_helper->crtc_info);
696 return -ENOMEM;
697 }
698 fb_helper->connector_info_alloc_count = dev->mode_config.num_connector;
699 fb_helper->connector_count = 0;
700
701 for (i = 0; i < crtc_count; i++) {
702 fb_helper->crtc_info[i].mode_set.connectors =
703 kcalloc(max_conn_count,
704 sizeof(struct drm_connector *),
705 GFP_KERNEL);
706
707 if (!fb_helper->crtc_info[i].mode_set.connectors)
708 goto out_free;
709 fb_helper->crtc_info[i].mode_set.num_connectors = 0;
710 }
711
712 i = 0;
713 drm_for_each_crtc(crtc, dev) {
714 fb_helper->crtc_info[i].mode_set.crtc = crtc;
715 i++;
716 }
717
718 fb_helper->atomic = !!drm_core_check_feature(dev, DRIVER_ATOMIC);
719
720 return 0;
721out_free:
722 drm_fb_helper_crtc_free(fb_helper);
723 return -ENOMEM;
724}
725EXPORT_SYMBOL(drm_fb_helper_init);
726
727/**
728 * drm_fb_helper_alloc_fbi - allocate fb_info and some of its members
729 * @fb_helper: driver-allocated fbdev helper
730 *
731 * A helper to alloc fb_info and the members cmap and apertures. Called
732 * by the driver within the fb_probe fb_helper callback function.
733 *
734 * RETURNS:
735 * fb_info pointer if things went okay, pointer containing error code
736 * otherwise
737 */
738struct fb_info *drm_fb_helper_alloc_fbi(struct drm_fb_helper *fb_helper)
739{
740 struct device *dev = fb_helper->dev->dev;
741 struct fb_info *info;
742 int ret;
743
744 info = framebuffer_alloc(0, dev);
745 if (!info)
746 return ERR_PTR(-ENOMEM);
747
748 ret = fb_alloc_cmap(&info->cmap, 256, 0);
749 if (ret)
750 goto err_release;
751
752 info->apertures = alloc_apertures(1);
753 if (!info->apertures) {
754 ret = -ENOMEM;
755 goto err_free_cmap;
756 }
757
758 fb_helper->fbdev = info;
759
760 return info;
761
762err_free_cmap:
763 fb_dealloc_cmap(&info->cmap);
764err_release:
765 framebuffer_release(info);
766 return ERR_PTR(ret);
767}
768EXPORT_SYMBOL(drm_fb_helper_alloc_fbi);
769
770/**
771 * drm_fb_helper_unregister_fbi - unregister fb_info framebuffer device
772 * @fb_helper: driver-allocated fbdev helper
773 *
774 * A wrapper around unregister_framebuffer, to release the fb_info
775 * framebuffer device
776 */
777void drm_fb_helper_unregister_fbi(struct drm_fb_helper *fb_helper)
778{
779 if (fb_helper && fb_helper->fbdev)
780 unregister_framebuffer(fb_helper->fbdev);
781}
782EXPORT_SYMBOL(drm_fb_helper_unregister_fbi);
783
784/**
785 * drm_fb_helper_release_fbi - dealloc fb_info and its members
786 * @fb_helper: driver-allocated fbdev helper
787 *
788 * A helper to free memory taken by fb_info and the members cmap and
789 * apertures
790 */
791void drm_fb_helper_release_fbi(struct drm_fb_helper *fb_helper)
792{
793 if (fb_helper) {
794 struct fb_info *info = fb_helper->fbdev;
795
796 if (info) {
797 if (info->cmap.len)
798 fb_dealloc_cmap(&info->cmap);
799 framebuffer_release(info);
800 }
801
802 fb_helper->fbdev = NULL;
803 }
804}
805EXPORT_SYMBOL(drm_fb_helper_release_fbi);
806
807void drm_fb_helper_fini(struct drm_fb_helper *fb_helper)
808{
809 if (!drm_fbdev_emulation)
810 return;
811
812 if (!list_empty(&fb_helper->kernel_fb_list)) {
813 list_del(&fb_helper->kernel_fb_list);
814 if (list_empty(&kernel_fb_helper_list)) {
815 unregister_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
816 }
817 }
818
819 drm_fb_helper_crtc_free(fb_helper);
820
821}
822EXPORT_SYMBOL(drm_fb_helper_fini);
823
824/**
825 * drm_fb_helper_unlink_fbi - wrapper around unlink_framebuffer
826 * @fb_helper: driver-allocated fbdev helper
827 *
828 * A wrapper around unlink_framebuffer implemented by fbdev core
829 */
830void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper)
831{
832 if (fb_helper && fb_helper->fbdev)
833 unlink_framebuffer(fb_helper->fbdev);
834}
835EXPORT_SYMBOL(drm_fb_helper_unlink_fbi);
836
837/**
838 * drm_fb_helper_sys_read - wrapper around fb_sys_read
839 * @info: fb_info struct pointer
840 * @buf: userspace buffer to read from framebuffer memory
841 * @count: number of bytes to read from framebuffer memory
842 * @ppos: read offset within framebuffer memory
843 *
844 * A wrapper around fb_sys_read implemented by fbdev core
845 */
846ssize_t drm_fb_helper_sys_read(struct fb_info *info, char __user *buf,
847 size_t count, loff_t *ppos)
848{
849 return fb_sys_read(info, buf, count, ppos);
850}
851EXPORT_SYMBOL(drm_fb_helper_sys_read);
852
853/**
854 * drm_fb_helper_sys_write - wrapper around fb_sys_write
855 * @info: fb_info struct pointer
856 * @buf: userspace buffer to write to framebuffer memory
857 * @count: number of bytes to write to framebuffer memory
858 * @ppos: write offset within framebuffer memory
859 *
860 * A wrapper around fb_sys_write implemented by fbdev core
861 */
862ssize_t drm_fb_helper_sys_write(struct fb_info *info, const char __user *buf,
863 size_t count, loff_t *ppos)
864{
865 return fb_sys_write(info, buf, count, ppos);
866}
867EXPORT_SYMBOL(drm_fb_helper_sys_write);
868
869/**
870 * drm_fb_helper_sys_fillrect - wrapper around sys_fillrect
871 * @info: fbdev registered by the helper
872 * @rect: info about rectangle to fill
873 *
874 * A wrapper around sys_fillrect implemented by fbdev core
875 */
876void drm_fb_helper_sys_fillrect(struct fb_info *info,
877 const struct fb_fillrect *rect)
878{
879 sys_fillrect(info, rect);
880}
881EXPORT_SYMBOL(drm_fb_helper_sys_fillrect);
882
883/**
884 * drm_fb_helper_sys_copyarea - wrapper around sys_copyarea
885 * @info: fbdev registered by the helper
886 * @area: info about area to copy
887 *
888 * A wrapper around sys_copyarea implemented by fbdev core
889 */
890void drm_fb_helper_sys_copyarea(struct fb_info *info,
891 const struct fb_copyarea *area)
892{
893 sys_copyarea(info, area);
894}
895EXPORT_SYMBOL(drm_fb_helper_sys_copyarea);
896
897/**
898 * drm_fb_helper_sys_imageblit - wrapper around sys_imageblit
899 * @info: fbdev registered by the helper
900 * @image: info about image to blit
901 *
902 * A wrapper around sys_imageblit implemented by fbdev core
903 */
904void drm_fb_helper_sys_imageblit(struct fb_info *info,
905 const struct fb_image *image)
906{
907 sys_imageblit(info, image);
908}
909EXPORT_SYMBOL(drm_fb_helper_sys_imageblit);
910
911/**
912 * drm_fb_helper_cfb_fillrect - wrapper around cfb_fillrect
913 * @info: fbdev registered by the helper
914 * @rect: info about rectangle to fill
915 *
916 * A wrapper around cfb_imageblit implemented by fbdev core
917 */
918void drm_fb_helper_cfb_fillrect(struct fb_info *info,
919 const struct fb_fillrect *rect)
920{
921 cfb_fillrect(info, rect);
922}
923EXPORT_SYMBOL(drm_fb_helper_cfb_fillrect);
924
925/**
926 * drm_fb_helper_cfb_copyarea - wrapper around cfb_copyarea
927 * @info: fbdev registered by the helper
928 * @area: info about area to copy
929 *
930 * A wrapper around cfb_copyarea implemented by fbdev core
931 */
932void drm_fb_helper_cfb_copyarea(struct fb_info *info,
933 const struct fb_copyarea *area)
934{
935 cfb_copyarea(info, area);
936}
937EXPORT_SYMBOL(drm_fb_helper_cfb_copyarea);
938
939/**
940 * drm_fb_helper_cfb_imageblit - wrapper around cfb_imageblit
941 * @info: fbdev registered by the helper
942 * @image: info about image to blit
943 *
944 * A wrapper around cfb_imageblit implemented by fbdev core
945 */
946void drm_fb_helper_cfb_imageblit(struct fb_info *info,
947 const struct fb_image *image)
948{
949 cfb_imageblit(info, image);
950}
951EXPORT_SYMBOL(drm_fb_helper_cfb_imageblit);
952
953/**
954 * drm_fb_helper_set_suspend - wrapper around fb_set_suspend
955 * @fb_helper: driver-allocated fbdev helper
956 * @state: desired state, zero to resume, non-zero to suspend
957 *
958 * A wrapper around fb_set_suspend implemented by fbdev core
959 */
960void drm_fb_helper_set_suspend(struct drm_fb_helper *fb_helper, int state)
961{
962 if (fb_helper && fb_helper->fbdev)
963 fb_set_suspend(fb_helper->fbdev, state);
964}
965EXPORT_SYMBOL(drm_fb_helper_set_suspend);
966
967static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
968 u16 blue, u16 regno, struct fb_info *info)
969{
970 struct drm_fb_helper *fb_helper = info->par;
971 struct drm_framebuffer *fb = fb_helper->fb;
972 int pindex;
973
974 if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
975 u32 *palette;
976 u32 value;
977 /* place color in psuedopalette */
978 if (regno > 16)
979 return -EINVAL;
980 palette = (u32 *)info->pseudo_palette;
981 red >>= (16 - info->var.red.length);
982 green >>= (16 - info->var.green.length);
983 blue >>= (16 - info->var.blue.length);
984 value = (red << info->var.red.offset) |
985 (green << info->var.green.offset) |
986 (blue << info->var.blue.offset);
987 if (info->var.transp.length > 0) {
988 u32 mask = (1 << info->var.transp.length) - 1;
989 mask <<= info->var.transp.offset;
990 value |= mask;
991 }
992 palette[regno] = value;
993 return 0;
994 }
995
996 /*
997 * The driver really shouldn't advertise pseudo/directcolor
998 * visuals if it can't deal with the palette.
999 */
1000 if (WARN_ON(!fb_helper->funcs->gamma_set ||
1001 !fb_helper->funcs->gamma_get))
1002 return -EINVAL;
1003
1004 pindex = regno;
1005
1006 if (fb->bits_per_pixel == 16) {
1007 pindex = regno << 3;
1008
1009 if (fb->depth == 16 && regno > 63)
1010 return -EINVAL;
1011 if (fb->depth == 15 && regno > 31)
1012 return -EINVAL;
1013
1014 if (fb->depth == 16) {
1015 u16 r, g, b;
1016 int i;
1017 if (regno < 32) {
1018 for (i = 0; i < 8; i++)
1019 fb_helper->funcs->gamma_set(crtc, red,
1020 green, blue, pindex + i);
1021 }
1022
1023 fb_helper->funcs->gamma_get(crtc, &r,
1024 &g, &b,
1025 pindex >> 1);
1026
1027 for (i = 0; i < 4; i++)
1028 fb_helper->funcs->gamma_set(crtc, r,
1029 green, b,
1030 (pindex >> 1) + i);
1031 }
1032 }
1033
1034 if (fb->depth != 16)
1035 fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex);
1036 return 0;
1037}
1038
1039/**
1040 * drm_fb_helper_setcmap - implementation for ->fb_setcmap
1041 * @cmap: cmap to set
1042 * @info: fbdev registered by the helper
1043 */
1044int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
1045{
1046 struct drm_fb_helper *fb_helper = info->par;
1047 struct drm_device *dev = fb_helper->dev;
1048 const struct drm_crtc_helper_funcs *crtc_funcs;
1049 u16 *red, *green, *blue, *transp;
1050 struct drm_crtc *crtc;
1051 int i, j, rc = 0;
1052 int start;
1053
1054 if (oops_in_progress)
1055 return -EBUSY;
1056
1057 drm_modeset_lock_all(dev);
1058 if (!drm_fb_helper_is_bound(fb_helper)) {
1059 drm_modeset_unlock_all(dev);
1060 return -EBUSY;
1061 }
1062
1063 for (i = 0; i < fb_helper->crtc_count; i++) {
1064 crtc = fb_helper->crtc_info[i].mode_set.crtc;
1065 crtc_funcs = crtc->helper_private;
1066
1067 red = cmap->red;
1068 green = cmap->green;
1069 blue = cmap->blue;
1070 transp = cmap->transp;
1071 start = cmap->start;
1072
1073 for (j = 0; j < cmap->len; j++) {
1074 u16 hred, hgreen, hblue, htransp = 0xffff;
1075
1076 hred = *red++;
1077 hgreen = *green++;
1078 hblue = *blue++;
1079
1080 if (transp)
1081 htransp = *transp++;
1082
1083 rc = setcolreg(crtc, hred, hgreen, hblue, start++, info);
1084 if (rc)
1085 goto out;
1086 }
1087 if (crtc_funcs->load_lut)
1088 crtc_funcs->load_lut(crtc);
1089 }
1090 out:
1091 drm_modeset_unlock_all(dev);
1092 return rc;
1093}
1094EXPORT_SYMBOL(drm_fb_helper_setcmap);
1095
1096/**
1097 * drm_fb_helper_check_var - implementation for ->fb_check_var
1098 * @var: screeninfo to check
1099 * @info: fbdev registered by the helper
1100 */
1101int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
1102 struct fb_info *info)
1103{
1104 struct drm_fb_helper *fb_helper = info->par;
1105 struct drm_framebuffer *fb = fb_helper->fb;
1106 int depth;
1107
1108 if (var->pixclock != 0 || in_dbg_master())
1109 return -EINVAL;
1110
1111 /* Need to resize the fb object !!! */
1112 if (var->bits_per_pixel > fb->bits_per_pixel ||
1113 var->xres > fb->width || var->yres > fb->height ||
1114 var->xres_virtual > fb->width || var->yres_virtual > fb->height) {
1115 DRM_DEBUG("fb userspace requested width/height/bpp is greater than current fb "
1116 "request %dx%d-%d (virtual %dx%d) > %dx%d-%d\n",
1117 var->xres, var->yres, var->bits_per_pixel,
1118 var->xres_virtual, var->yres_virtual,
1119 fb->width, fb->height, fb->bits_per_pixel);
1120 return -EINVAL;
1121 }
1122
1123 switch (var->bits_per_pixel) {
1124 case 16:
1125 depth = (var->green.length == 6) ? 16 : 15;
1126 break;
1127 case 32:
1128 depth = (var->transp.length > 0) ? 32 : 24;
1129 break;
1130 default:
1131 depth = var->bits_per_pixel;
1132 break;
1133 }
1134
1135 switch (depth) {
1136 case 8:
1137 var->red.offset = 0;
1138 var->green.offset = 0;
1139 var->blue.offset = 0;
1140 var->red.length = 8;
1141 var->green.length = 8;
1142 var->blue.length = 8;
1143 var->transp.length = 0;
1144 var->transp.offset = 0;
1145 break;
1146 case 15:
1147 var->red.offset = 10;
1148 var->green.offset = 5;
1149 var->blue.offset = 0;
1150 var->red.length = 5;
1151 var->green.length = 5;
1152 var->blue.length = 5;
1153 var->transp.length = 1;
1154 var->transp.offset = 15;
1155 break;
1156 case 16:
1157 var->red.offset = 11;
1158 var->green.offset = 5;
1159 var->blue.offset = 0;
1160 var->red.length = 5;
1161 var->green.length = 6;
1162 var->blue.length = 5;
1163 var->transp.length = 0;
1164 var->transp.offset = 0;
1165 break;
1166 case 24:
1167 var->red.offset = 16;
1168 var->green.offset = 8;
1169 var->blue.offset = 0;
1170 var->red.length = 8;
1171 var->green.length = 8;
1172 var->blue.length = 8;
1173 var->transp.length = 0;
1174 var->transp.offset = 0;
1175 break;
1176 case 32:
1177 var->red.offset = 16;
1178 var->green.offset = 8;
1179 var->blue.offset = 0;
1180 var->red.length = 8;
1181 var->green.length = 8;
1182 var->blue.length = 8;
1183 var->transp.length = 8;
1184 var->transp.offset = 24;
1185 break;
1186 default:
1187 return -EINVAL;
1188 }
1189 return 0;
1190}
1191EXPORT_SYMBOL(drm_fb_helper_check_var);
1192
1193/**
1194 * drm_fb_helper_set_par - implementation for ->fb_set_par
1195 * @info: fbdev registered by the helper
1196 *
1197 * This will let fbcon do the mode init and is called at initialization time by
1198 * the fbdev core when registering the driver, and later on through the hotplug
1199 * callback.
1200 */
1201int drm_fb_helper_set_par(struct fb_info *info)
1202{
1203 struct drm_fb_helper *fb_helper = info->par;
1204 struct fb_var_screeninfo *var = &info->var;
1205
1206 if (oops_in_progress)
1207 return -EBUSY;
1208
1209 if (var->pixclock != 0) {
1210 DRM_ERROR("PIXEL CLOCK SET\n");
1211 return -EINVAL;
1212 }
1213
1214 drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper);
1215
1216 return 0;
1217}
1218EXPORT_SYMBOL(drm_fb_helper_set_par);
1219
1220static int pan_display_atomic(struct fb_var_screeninfo *var,
1221 struct fb_info *info)
1222{
1223 struct drm_fb_helper *fb_helper = info->par;
1224 struct drm_device *dev = fb_helper->dev;
1225 struct drm_atomic_state *state;
1226 struct drm_plane *plane;
1227 int i, ret;
1228 unsigned plane_mask;
1229
1230 state = drm_atomic_state_alloc(dev);
1231 if (!state)
1232 return -ENOMEM;
1233
1234 state->acquire_ctx = dev->mode_config.acquire_ctx;
1235retry:
1236 plane_mask = 0;
1237 for(i = 0; i < fb_helper->crtc_count; i++) {
1238 struct drm_mode_set *mode_set;
1239
1240 mode_set = &fb_helper->crtc_info[i].mode_set;
1241
1242 mode_set->x = var->xoffset;
1243 mode_set->y = var->yoffset;
1244
1245 ret = __drm_atomic_helper_set_config(mode_set, state);
1246 if (ret != 0)
1247 goto fail;
1248
1249 plane = mode_set->crtc->primary;
1250 plane_mask |= (1 << drm_plane_index(plane));
1251 plane->old_fb = plane->fb;
1252 }
1253
1254 ret = drm_atomic_commit(state);
1255 if (ret != 0)
1256 goto fail;
1257
1258 info->var.xoffset = var->xoffset;
1259 info->var.yoffset = var->yoffset;
1260
1261
1262fail:
1263 drm_atomic_clean_old_fb(dev, plane_mask, ret);
1264
1265 if (ret == -EDEADLK)
1266 goto backoff;
1267
1268 if (ret != 0)
1269 drm_atomic_state_free(state);
1270
1271 return ret;
1272
1273backoff:
1274 drm_atomic_state_clear(state);
1275 drm_atomic_legacy_backoff(state);
1276
1277 goto retry;
1278}
1279
1280/**
1281 * drm_fb_helper_pan_display - implementation for ->fb_pan_display
1282 * @var: updated screen information
1283 * @info: fbdev registered by the helper
1284 */
1285int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
1286 struct fb_info *info)
1287{
1288 struct drm_fb_helper *fb_helper = info->par;
1289 struct drm_device *dev = fb_helper->dev;
1290 struct drm_mode_set *modeset;
1291 int ret = 0;
1292 int i;
1293
1294 if (oops_in_progress)
1295 return -EBUSY;
1296
1297 drm_modeset_lock_all(dev);
1298 if (!drm_fb_helper_is_bound(fb_helper)) {
1299 drm_modeset_unlock_all(dev);
1300 return -EBUSY;
1301 }
1302
1303 if (fb_helper->atomic) {
1304 ret = pan_display_atomic(var, info);
1305 goto unlock;
1306 }
1307
1308 for (i = 0; i < fb_helper->crtc_count; i++) {
1309 modeset = &fb_helper->crtc_info[i].mode_set;
1310
1311 modeset->x = var->xoffset;
1312 modeset->y = var->yoffset;
1313
1314 if (modeset->num_connectors) {
1315 ret = drm_mode_set_config_internal(modeset);
1316 if (!ret) {
1317 info->var.xoffset = var->xoffset;
1318 info->var.yoffset = var->yoffset;
1319 }
1320 }
1321 }
1322unlock:
1323 drm_modeset_unlock_all(dev);
1324 return ret;
1325}
1326EXPORT_SYMBOL(drm_fb_helper_pan_display);
1327
1328/*
1329 * Allocates the backing storage and sets up the fbdev info structure through
1330 * the ->fb_probe callback and then registers the fbdev and sets up the panic
1331 * notifier.
1332 */
1333static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
1334 int preferred_bpp)
1335{
1336 int ret = 0;
1337 int crtc_count = 0;
1338 int i;
1339 struct fb_info *info;
1340 struct drm_fb_helper_surface_size sizes;
1341 int gamma_size = 0;
1342
1343 memset(&sizes, 0, sizeof(struct drm_fb_helper_surface_size));
1344 sizes.surface_depth = 24;
1345 sizes.surface_bpp = 32;
1346 sizes.fb_width = (unsigned)-1;
1347 sizes.fb_height = (unsigned)-1;
1348
1349 /* if driver picks 8 or 16 by default use that
1350 for both depth/bpp */
1351 if (preferred_bpp != sizes.surface_bpp)
1352 sizes.surface_depth = sizes.surface_bpp = preferred_bpp;
1353
1354 /* first up get a count of crtcs now in use and new min/maxes width/heights */
1355 for (i = 0; i < fb_helper->connector_count; i++) {
1356 struct drm_fb_helper_connector *fb_helper_conn = fb_helper->connector_info[i];
1357 struct drm_cmdline_mode *cmdline_mode;
1358
1359 cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
1360
1361 if (cmdline_mode->bpp_specified) {
1362 switch (cmdline_mode->bpp) {
1363 case 8:
1364 sizes.surface_depth = sizes.surface_bpp = 8;
1365 break;
1366 case 15:
1367 sizes.surface_depth = 15;
1368 sizes.surface_bpp = 16;
1369 break;
1370 case 16:
1371 sizes.surface_depth = sizes.surface_bpp = 16;
1372 break;
1373 case 24:
1374 sizes.surface_depth = sizes.surface_bpp = 24;
1375 break;
1376 case 32:
1377 sizes.surface_depth = 24;
1378 sizes.surface_bpp = 32;
1379 break;
1380 }
1381 break;
1382 }
1383 }
1384
1385 crtc_count = 0;
1386 for (i = 0; i < fb_helper->crtc_count; i++) {
1387 struct drm_display_mode *desired_mode;
1388 struct drm_mode_set *mode_set;
1389 int x, y, j;
1390 /* in case of tile group, are we the last tile vert or horiz?
1391 * If no tile group you are always the last one both vertically
1392 * and horizontally
1393 */
1394 bool lastv = true, lasth = true;
1395
1396 desired_mode = fb_helper->crtc_info[i].desired_mode;
1397 mode_set = &fb_helper->crtc_info[i].mode_set;
1398
1399 if (!desired_mode)
1400 continue;
1401
1402 crtc_count++;
1403
1404 x = fb_helper->crtc_info[i].x;
1405 y = fb_helper->crtc_info[i].y;
1406
1407 if (gamma_size == 0)
1408 gamma_size = fb_helper->crtc_info[i].mode_set.crtc->gamma_size;
1409
1410 sizes.surface_width = max_t(u32, desired_mode->hdisplay + x, sizes.surface_width);
1411 sizes.surface_height = max_t(u32, desired_mode->vdisplay + y, sizes.surface_height);
1412
1413 for (j = 0; j < mode_set->num_connectors; j++) {
1414 struct drm_connector *connector = mode_set->connectors[j];
1415 if (connector->has_tile) {
1416 lasth = (connector->tile_h_loc == (connector->num_h_tile - 1));
1417 lastv = (connector->tile_v_loc == (connector->num_v_tile - 1));
1418 /* cloning to multiple tiles is just crazy-talk, so: */
1419 break;
1420 }
1421 }
1422
1423 if (lasth)
1424 sizes.fb_width = min_t(u32, desired_mode->hdisplay + x, sizes.fb_width);
1425 if (lastv)
1426 sizes.fb_height = min_t(u32, desired_mode->vdisplay + y, sizes.fb_height);
1427 }
1428
1429 if (crtc_count == 0 || sizes.fb_width == -1 || sizes.fb_height == -1) {
1430 /* hmm everyone went away - assume VGA cable just fell out
1431 and will come back later. */
1432 DRM_INFO("Cannot find any crtc or sizes - going 1024x768\n");
1433 sizes.fb_width = sizes.surface_width = 1024;
1434 sizes.fb_height = sizes.surface_height = 768;
1435 }
1436
1437 /* push down into drivers */
1438 ret = (*fb_helper->funcs->fb_probe)(fb_helper, &sizes);
1439 if (ret < 0)
1440 return ret;
1441
1442 info = fb_helper->fbdev;
1443
1444 /*
1445 * Set the fb pointer - usually drm_setup_crtcs does this for hotplug
1446 * events, but at init time drm_setup_crtcs needs to be called before
1447 * the fb is allocated (since we need to figure out the desired size of
1448 * the fb before we can allocate it ...). Hence we need to fix things up
1449 * here again.
1450 */
1451 for (i = 0; i < fb_helper->crtc_count; i++)
1452 if (fb_helper->crtc_info[i].mode_set.num_connectors)
1453 fb_helper->crtc_info[i].mode_set.fb = fb_helper->fb;
1454
1455
1456 info->var.pixclock = 0;
1457 if (register_framebuffer(info) < 0)
1458 return -EINVAL;
1459
1460 dev_info(fb_helper->dev->dev, "fb%d: %s frame buffer device\n",
1461 info->node, info->fix.id);
1462
1463 if (list_empty(&kernel_fb_helper_list)) {
1464 register_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
1465 }
1466
1467 list_add(&fb_helper->kernel_fb_list, &kernel_fb_helper_list);
1468
1469 return 0;
1470}
1471
1472/**
1473 * drm_fb_helper_fill_fix - initializes fixed fbdev information
1474 * @info: fbdev registered by the helper
1475 * @pitch: desired pitch
1476 * @depth: desired depth
1477 *
1478 * Helper to fill in the fixed fbdev information useful for a non-accelerated
1479 * fbdev emulations. Drivers which support acceleration methods which impose
1480 * additional constraints need to set up their own limits.
1481 *
1482 * Drivers should call this (or their equivalent setup code) from their
1483 * ->fb_probe callback.
1484 */
1485void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
1486 uint32_t depth)
1487{
1488 info->fix.type = FB_TYPE_PACKED_PIXELS;
1489 info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR :
1490 FB_VISUAL_TRUECOLOR;
1491 info->fix.mmio_start = 0;
1492 info->fix.mmio_len = 0;
1493 info->fix.type_aux = 0;
1494 info->fix.xpanstep = 1; /* doing it in hw */
1495 info->fix.ypanstep = 1; /* doing it in hw */
1496 info->fix.ywrapstep = 0;
1497 info->fix.accel = FB_ACCEL_NONE;
1498
1499 info->fix.line_length = pitch;
1500 return;
1501}
1502EXPORT_SYMBOL(drm_fb_helper_fill_fix);
1503
1504/**
1505 * drm_fb_helper_fill_var - initalizes variable fbdev information
1506 * @info: fbdev instance to set up
1507 * @fb_helper: fb helper instance to use as template
1508 * @fb_width: desired fb width
1509 * @fb_height: desired fb height
1510 *
1511 * Sets up the variable fbdev metainformation from the given fb helper instance
1512 * and the drm framebuffer allocated in fb_helper->fb.
1513 *
1514 * Drivers should call this (or their equivalent setup code) from their
1515 * ->fb_probe callback after having allocated the fbdev backing
1516 * storage framebuffer.
1517 */
1518void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper,
1519 uint32_t fb_width, uint32_t fb_height)
1520{
1521 struct drm_framebuffer *fb = fb_helper->fb;
1522 info->pseudo_palette = fb_helper->pseudo_palette;
1523 info->var.xres_virtual = fb->width;
1524 info->var.yres_virtual = fb->height;
1525 info->var.bits_per_pixel = fb->bits_per_pixel;
1526 info->var.accel_flags = FB_ACCELF_TEXT;
1527 info->var.xoffset = 0;
1528 info->var.yoffset = 0;
1529 info->var.activate = FB_ACTIVATE_NOW;
1530 info->var.height = -1;
1531 info->var.width = -1;
1532
1533 switch (fb->depth) {
1534 case 8:
1535 info->var.red.offset = 0;
1536 info->var.green.offset = 0;
1537 info->var.blue.offset = 0;
1538 info->var.red.length = 8; /* 8bit DAC */
1539 info->var.green.length = 8;
1540 info->var.blue.length = 8;
1541 info->var.transp.offset = 0;
1542 info->var.transp.length = 0;
1543 break;
1544 case 15:
1545 info->var.red.offset = 10;
1546 info->var.green.offset = 5;
1547 info->var.blue.offset = 0;
1548 info->var.red.length = 5;
1549 info->var.green.length = 5;
1550 info->var.blue.length = 5;
1551 info->var.transp.offset = 15;
1552 info->var.transp.length = 1;
1553 break;
1554 case 16:
1555 info->var.red.offset = 11;
1556 info->var.green.offset = 5;
1557 info->var.blue.offset = 0;
1558 info->var.red.length = 5;
1559 info->var.green.length = 6;
1560 info->var.blue.length = 5;
1561 info->var.transp.offset = 0;
1562 break;
1563 case 24:
1564 info->var.red.offset = 16;
1565 info->var.green.offset = 8;
1566 info->var.blue.offset = 0;
1567 info->var.red.length = 8;
1568 info->var.green.length = 8;
1569 info->var.blue.length = 8;
1570 info->var.transp.offset = 0;
1571 info->var.transp.length = 0;
1572 break;
1573 case 32:
1574 info->var.red.offset = 16;
1575 info->var.green.offset = 8;
1576 info->var.blue.offset = 0;
1577 info->var.red.length = 8;
1578 info->var.green.length = 8;
1579 info->var.blue.length = 8;
1580 info->var.transp.offset = 24;
1581 info->var.transp.length = 8;
1582 break;
1583 default:
1584 break;
1585 }
1586
1587 info->var.xres = fb_width;
1588 info->var.yres = fb_height;
1589}
1590EXPORT_SYMBOL(drm_fb_helper_fill_var);
1591
1592static int drm_fb_helper_probe_connector_modes(struct drm_fb_helper *fb_helper,
1593 uint32_t maxX,
1594 uint32_t maxY)
1595{
1596 struct drm_connector *connector;
1597 int count = 0;
1598 int i;
1599
1600 for (i = 0; i < fb_helper->connector_count; i++) {
1601 connector = fb_helper->connector_info[i]->connector;
1602 count += connector->funcs->fill_modes(connector, maxX, maxY);
1603 }
1604
1605 return count;
1606}
1607
1608struct drm_display_mode *drm_has_preferred_mode(struct drm_fb_helper_connector *fb_connector, int width, int height)
1609{
1610 struct drm_display_mode *mode;
1611
1612 list_for_each_entry(mode, &fb_connector->connector->modes, head) {
1613 if (mode->hdisplay > width ||
1614 mode->vdisplay > height)
1615 continue;
1616 if (mode->type & DRM_MODE_TYPE_PREFERRED)
1617 return mode;
1618 }
1619 return NULL;
1620}
1621EXPORT_SYMBOL(drm_has_preferred_mode);
1622
1623static bool drm_has_cmdline_mode(struct drm_fb_helper_connector *fb_connector)
1624{
1625 return fb_connector->connector->cmdline_mode.specified;
1626}
1627
1628struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_connector *fb_helper_conn,
1629 int width, int height)
1630{
1631 struct drm_cmdline_mode *cmdline_mode;
1632 struct drm_display_mode *mode;
1633 bool prefer_non_interlace;
1634
1635 cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
1636 if (cmdline_mode->specified == false)
1637 return NULL;
1638
1639 /* attempt to find a matching mode in the list of modes
1640 * we have gotten so far, if not add a CVT mode that conforms
1641 */
1642 if (cmdline_mode->rb || cmdline_mode->margins)
1643 goto create_mode;
1644
1645 prefer_non_interlace = !cmdline_mode->interlace;
1646again:
1647 list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
1648 /* check width/height */
1649 if (mode->hdisplay != cmdline_mode->xres ||
1650 mode->vdisplay != cmdline_mode->yres)
1651 continue;
1652
1653 if (cmdline_mode->refresh_specified) {
1654 if (mode->vrefresh != cmdline_mode->refresh)
1655 continue;
1656 }
1657
1658 if (cmdline_mode->interlace) {
1659 if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
1660 continue;
1661 } else if (prefer_non_interlace) {
1662 if (mode->flags & DRM_MODE_FLAG_INTERLACE)
1663 continue;
1664 }
1665 return mode;
1666 }
1667
1668 if (prefer_non_interlace) {
1669 prefer_non_interlace = false;
1670 goto again;
1671 }
1672
1673create_mode:
1674 mode = drm_mode_create_from_cmdline_mode(fb_helper_conn->connector->dev,
1675 cmdline_mode);
1676 list_add(&mode->head, &fb_helper_conn->connector->modes);
1677 return mode;
1678}
1679EXPORT_SYMBOL(drm_pick_cmdline_mode);
1680
1681static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
1682{
1683 bool enable;
1684
1685 if (strict)
1686 enable = connector->status == connector_status_connected;
1687 else
1688 enable = connector->status != connector_status_disconnected;
1689
1690 return enable;
1691}
1692
1693static void drm_enable_connectors(struct drm_fb_helper *fb_helper,
1694 bool *enabled)
1695{
1696 bool any_enabled = false;
1697 struct drm_connector *connector;
1698 int i = 0;
1699
1700 for (i = 0; i < fb_helper->connector_count; i++) {
1701 connector = fb_helper->connector_info[i]->connector;
1702 enabled[i] = drm_connector_enabled(connector, true);
1703 DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
1704 enabled[i] ? "yes" : "no");
1705 any_enabled |= enabled[i];
1706 }
1707
1708 if (any_enabled)
1709 return;
1710
1711 for (i = 0; i < fb_helper->connector_count; i++) {
1712 connector = fb_helper->connector_info[i]->connector;
1713 enabled[i] = drm_connector_enabled(connector, false);
1714 }
1715}
1716
1717static bool drm_target_cloned(struct drm_fb_helper *fb_helper,
1718 struct drm_display_mode **modes,
1719 struct drm_fb_offset *offsets,
1720 bool *enabled, int width, int height)
1721{
1722 int count, i, j;
1723 bool can_clone = false;
1724 struct drm_fb_helper_connector *fb_helper_conn;
1725 struct drm_display_mode *dmt_mode, *mode;
1726
1727 /* only contemplate cloning in the single crtc case */
1728 if (fb_helper->crtc_count > 1)
1729 return false;
1730
1731 count = 0;
1732 for (i = 0; i < fb_helper->connector_count; i++) {
1733 if (enabled[i])
1734 count++;
1735 }
1736
1737 /* only contemplate cloning if more than one connector is enabled */
1738 if (count <= 1)
1739 return false;
1740
1741 /* check the command line or if nothing common pick 1024x768 */
1742 can_clone = true;
1743 for (i = 0; i < fb_helper->connector_count; i++) {
1744 if (!enabled[i])
1745 continue;
1746 fb_helper_conn = fb_helper->connector_info[i];
1747 modes[i] = drm_pick_cmdline_mode(fb_helper_conn, width, height);
1748 if (!modes[i]) {
1749 can_clone = false;
1750 break;
1751 }
1752 for (j = 0; j < i; j++) {
1753 if (!enabled[j])
1754 continue;
1755 if (!drm_mode_equal(modes[j], modes[i]))
1756 can_clone = false;
1757 }
1758 }
1759
1760 if (can_clone) {
1761 DRM_DEBUG_KMS("can clone using command line\n");
1762 return true;
1763 }
1764
1765 /* try and find a 1024x768 mode on each connector */
1766 can_clone = true;
1767 dmt_mode = drm_mode_find_dmt(fb_helper->dev, 1024, 768, 60, false);
1768
1769 for (i = 0; i < fb_helper->connector_count; i++) {
1770
1771 if (!enabled[i])
1772 continue;
1773
1774 fb_helper_conn = fb_helper->connector_info[i];
1775 list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
1776 if (drm_mode_equal(mode, dmt_mode))
1777 modes[i] = mode;
1778 }
1779 if (!modes[i])
1780 can_clone = false;
1781 }
1782
1783 if (can_clone) {
1784 DRM_DEBUG_KMS("can clone using 1024x768\n");
1785 return true;
1786 }
1787 DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
1788 return false;
1789}
1790
1791static int drm_get_tile_offsets(struct drm_fb_helper *fb_helper,
1792 struct drm_display_mode **modes,
1793 struct drm_fb_offset *offsets,
1794 int idx,
1795 int h_idx, int v_idx)
1796{
1797 struct drm_fb_helper_connector *fb_helper_conn;
1798 int i;
1799 int hoffset = 0, voffset = 0;
1800
1801 for (i = 0; i < fb_helper->connector_count; i++) {
1802 fb_helper_conn = fb_helper->connector_info[i];
1803 if (!fb_helper_conn->connector->has_tile)
1804 continue;
1805
1806 if (!modes[i] && (h_idx || v_idx)) {
1807 DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i,
1808 fb_helper_conn->connector->base.id);
1809 continue;
1810 }
1811 if (fb_helper_conn->connector->tile_h_loc < h_idx)
1812 hoffset += modes[i]->hdisplay;
1813
1814 if (fb_helper_conn->connector->tile_v_loc < v_idx)
1815 voffset += modes[i]->vdisplay;
1816 }
1817 offsets[idx].x = hoffset;
1818 offsets[idx].y = voffset;
1819 DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
1820 return 0;
1821}
1822
1823static bool drm_target_preferred(struct drm_fb_helper *fb_helper,
1824 struct drm_display_mode **modes,
1825 struct drm_fb_offset *offsets,
1826 bool *enabled, int width, int height)
1827{
1828 struct drm_fb_helper_connector *fb_helper_conn;
1829 int i;
1830 uint64_t conn_configured = 0, mask;
1831 int tile_pass = 0;
1832 mask = (1 << fb_helper->connector_count) - 1;
1833retry:
1834 for (i = 0; i < fb_helper->connector_count; i++) {
1835 fb_helper_conn = fb_helper->connector_info[i];
1836
1837 if (conn_configured & (1 << i))
1838 continue;
1839
1840 if (enabled[i] == false) {
1841 conn_configured |= (1 << i);
1842 continue;
1843 }
1844
1845 /* first pass over all the untiled connectors */
1846 if (tile_pass == 0 && fb_helper_conn->connector->has_tile)
1847 continue;
1848
1849 if (tile_pass == 1) {
1850 if (fb_helper_conn->connector->tile_h_loc != 0 ||
1851 fb_helper_conn->connector->tile_v_loc != 0)
1852 continue;
1853
1854 } else {
1855 if (fb_helper_conn->connector->tile_h_loc != tile_pass -1 &&
1856 fb_helper_conn->connector->tile_v_loc != tile_pass - 1)
1857 /* if this tile_pass doesn't cover any of the tiles - keep going */
1858 continue;
1859
1860 /* find the tile offsets for this pass - need
1861 to find all tiles left and above */
1862 drm_get_tile_offsets(fb_helper, modes, offsets,
1863 i, fb_helper_conn->connector->tile_h_loc, fb_helper_conn->connector->tile_v_loc);
1864 }
1865 DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
1866 fb_helper_conn->connector->base.id);
1867
1868 /* got for command line mode first */
1869 modes[i] = drm_pick_cmdline_mode(fb_helper_conn, width, height);
1870 if (!modes[i]) {
1871 DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n",
1872 fb_helper_conn->connector->base.id, fb_helper_conn->connector->tile_group ? fb_helper_conn->connector->tile_group->id : 0);
1873 modes[i] = drm_has_preferred_mode(fb_helper_conn, width, height);
1874 }
1875 /* No preferred modes, pick one off the list */
1876 if (!modes[i] && !list_empty(&fb_helper_conn->connector->modes)) {
1877 list_for_each_entry(modes[i], &fb_helper_conn->connector->modes, head)
1878 break;
1879 }
1880 DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
1881 "none");
1882 conn_configured |= (1 << i);
1883 }
1884
1885 if ((conn_configured & mask) != mask) {
1886 tile_pass++;
1887 goto retry;
1888 }
1889 return true;
1890}
1891
1892static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
1893 struct drm_fb_helper_crtc **best_crtcs,
1894 struct drm_display_mode **modes,
1895 int n, int width, int height)
1896{
1897 int c, o;
1898 struct drm_device *dev = fb_helper->dev;
1899 struct drm_connector *connector;
1900 const struct drm_connector_helper_funcs *connector_funcs;
1901 struct drm_encoder *encoder;
1902 int my_score, best_score, score;
1903 struct drm_fb_helper_crtc **crtcs, *crtc;
1904 struct drm_fb_helper_connector *fb_helper_conn;
1905
1906 if (n == fb_helper->connector_count)
1907 return 0;
1908
1909 fb_helper_conn = fb_helper->connector_info[n];
1910 connector = fb_helper_conn->connector;
1911
1912 best_crtcs[n] = NULL;
1913 best_score = drm_pick_crtcs(fb_helper, best_crtcs, modes, n+1, width, height);
1914 if (modes[n] == NULL)
1915 return best_score;
1916
1917 crtcs = kzalloc(dev->mode_config.num_connector *
1918 sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
1919 if (!crtcs)
1920 return best_score;
1921
1922 my_score = 1;
1923 if (connector->status == connector_status_connected)
1924 my_score++;
1925 if (drm_has_cmdline_mode(fb_helper_conn))
1926 my_score++;
1927 if (drm_has_preferred_mode(fb_helper_conn, width, height))
1928 my_score++;
1929
1930 connector_funcs = connector->helper_private;
1931 encoder = connector_funcs->best_encoder(connector);
1932 if (!encoder)
1933 goto out;
1934
1935 /* select a crtc for this connector and then attempt to configure
1936 remaining connectors */
1937 for (c = 0; c < fb_helper->crtc_count; c++) {
1938 crtc = &fb_helper->crtc_info[c];
1939
1940 if ((encoder->possible_crtcs & (1 << c)) == 0)
1941 continue;
1942
1943 for (o = 0; o < n; o++)
1944 if (best_crtcs[o] == crtc)
1945 break;
1946
1947 if (o < n) {
1948 /* ignore cloning unless only a single crtc */
1949 if (fb_helper->crtc_count > 1)
1950 continue;
1951
1952 if (!drm_mode_equal(modes[o], modes[n]))
1953 continue;
1954 }
1955
1956 crtcs[n] = crtc;
1957 memcpy(crtcs, best_crtcs, n * sizeof(struct drm_fb_helper_crtc *));
1958 score = my_score + drm_pick_crtcs(fb_helper, crtcs, modes, n + 1,
1959 width, height);
1960 if (score > best_score) {
1961 best_score = score;
1962 memcpy(best_crtcs, crtcs,
1963 dev->mode_config.num_connector *
1964 sizeof(struct drm_fb_helper_crtc *));
1965 }
1966 }
1967out:
1968 kfree(crtcs);
1969 return best_score;
1970}
1971
1972static void drm_setup_crtcs(struct drm_fb_helper *fb_helper)
1973{
1974 struct drm_device *dev = fb_helper->dev;
1975 struct drm_fb_helper_crtc **crtcs;
1976 struct drm_display_mode **modes;
1977 struct drm_fb_offset *offsets;
1978 struct drm_mode_set *modeset;
1979 bool *enabled;
1980 int width, height;
1981 int i;
1982
1983 DRM_DEBUG_KMS("\n");
1984
1985 width = dev->mode_config.max_width;
1986 height = dev->mode_config.max_height;
1987
1988 crtcs = kcalloc(fb_helper->connector_count,
1989 sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
1990 modes = kcalloc(fb_helper->connector_count,
1991 sizeof(struct drm_display_mode *), GFP_KERNEL);
1992 offsets = kcalloc(fb_helper->connector_count,
1993 sizeof(struct drm_fb_offset), GFP_KERNEL);
1994 enabled = kcalloc(fb_helper->connector_count,
1995 sizeof(bool), GFP_KERNEL);
1996 if (!crtcs || !modes || !enabled || !offsets) {
1997 DRM_ERROR("Memory allocation failed\n");
1998 goto out;
1999 }
2000
2001
2002 drm_enable_connectors(fb_helper, enabled);
2003
2004 if (!(fb_helper->funcs->initial_config &&
2005 fb_helper->funcs->initial_config(fb_helper, crtcs, modes,
2006 offsets,
2007 enabled, width, height))) {
2008 memset(modes, 0, fb_helper->connector_count*sizeof(modes[0]));
2009 memset(crtcs, 0, fb_helper->connector_count*sizeof(crtcs[0]));
2010 memset(offsets, 0, fb_helper->connector_count*sizeof(offsets[0]));
2011
2012 if (!drm_target_cloned(fb_helper, modes, offsets,
2013 enabled, width, height) &&
2014 !drm_target_preferred(fb_helper, modes, offsets,
2015 enabled, width, height))
2016 DRM_ERROR("Unable to find initial modes\n");
2017
2018 DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
2019 width, height);
2020
2021 drm_pick_crtcs(fb_helper, crtcs, modes, 0, width, height);
2022 }
2023
2024 /* need to set the modesets up here for use later */
2025 /* fill out the connector<->crtc mappings into the modesets */
2026 for (i = 0; i < fb_helper->crtc_count; i++) {
2027 modeset = &fb_helper->crtc_info[i].mode_set;
2028 modeset->num_connectors = 0;
2029 modeset->fb = NULL;
2030 }
2031
2032 for (i = 0; i < fb_helper->connector_count; i++) {
2033 struct drm_display_mode *mode = modes[i];
2034 struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
2035 struct drm_fb_offset *offset = &offsets[i];
2036 modeset = &fb_crtc->mode_set;
2037
2038 if (mode && fb_crtc) {
2039 DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
2040 mode->name, fb_crtc->mode_set.crtc->base.id, offset->x, offset->y);
2041 fb_crtc->desired_mode = mode;
2042 fb_crtc->x = offset->x;
2043 fb_crtc->y = offset->y;
2044 if (modeset->mode)
2045 drm_mode_destroy(dev, modeset->mode);
2046 modeset->mode = drm_mode_duplicate(dev,
2047 fb_crtc->desired_mode);
2048 modeset->connectors[modeset->num_connectors++] = fb_helper->connector_info[i]->connector;
2049 modeset->fb = fb_helper->fb;
2050 modeset->x = offset->x;
2051 modeset->y = offset->y;
2052 }
2053 }
2054
2055 /* Clear out any old modes if there are no more connected outputs. */
2056 for (i = 0; i < fb_helper->crtc_count; i++) {
2057 modeset = &fb_helper->crtc_info[i].mode_set;
2058 if (modeset->num_connectors == 0) {
2059 BUG_ON(modeset->fb);
2060 if (modeset->mode)
2061 drm_mode_destroy(dev, modeset->mode);
2062 modeset->mode = NULL;
2063 }
2064 }
2065out:
2066 kfree(crtcs);
2067 kfree(modes);
2068 kfree(offsets);
2069 kfree(enabled);
2070}
2071
2072/**
2073 * drm_fb_helper_initial_config - setup a sane initial connector configuration
2074 * @fb_helper: fb_helper device struct
2075 * @bpp_sel: bpp value to use for the framebuffer configuration
2076 *
2077 * Scans the CRTCs and connectors and tries to put together an initial setup.
2078 * At the moment, this is a cloned configuration across all heads with
2079 * a new framebuffer object as the backing store.
2080 *
2081 * Note that this also registers the fbdev and so allows userspace to call into
2082 * the driver through the fbdev interfaces.
2083 *
2084 * This function will call down into the ->fb_probe callback to let
2085 * the driver allocate and initialize the fbdev info structure and the drm
2086 * framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
2087 * drm_fb_helper_fill_fix() are provided as helpers to setup simple default
2088 * values for the fbdev info structure.
2089 *
2090 * HANG DEBUGGING:
2091 *
2092 * When you have fbcon support built-in or already loaded, this function will do
2093 * a full modeset to setup the fbdev console. Due to locking misdesign in the
2094 * VT/fbdev subsystem that entire modeset sequence has to be done while holding
2095 * console_lock. Until console_unlock is called no dmesg lines will be sent out
2096 * to consoles, not even serial console. This means when your driver crashes,
2097 * you will see absolutely nothing else but a system stuck in this function,
2098 * with no further output. Any kind of printk() you place within your own driver
2099 * or in the drm core modeset code will also never show up.
2100 *
2101 * Standard debug practice is to run the fbcon setup without taking the
2102 * console_lock as a hack, to be able to see backtraces and crashes on the
2103 * serial line. This can be done by setting the fb.lockless_register_fb=1 kernel
2104 * cmdline option.
2105 *
2106 * The other option is to just disable fbdev emulation since very likely the
2107 * first modest from userspace will crash in the same way, and is even easier to
2108 * debug. This can be done by setting the drm_kms_helper.fbdev_emulation=0
2109 * kernel cmdline option.
2110 *
2111 * RETURNS:
2112 * Zero if everything went ok, nonzero otherwise.
2113 */
2114int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel)
2115{
2116 struct drm_device *dev = fb_helper->dev;
2117 int count = 0;
2118
2119 if (!drm_fbdev_emulation)
2120 return 0;
2121
2122 mutex_lock(&dev->mode_config.mutex);
2123 count = drm_fb_helper_probe_connector_modes(fb_helper,
2124 dev->mode_config.max_width,
2125 dev->mode_config.max_height);
2126 mutex_unlock(&dev->mode_config.mutex);
2127 /*
2128 * we shouldn't end up with no modes here.
2129 */
2130 if (count == 0)
2131 dev_info(fb_helper->dev->dev, "No connectors reported connected with modes\n");
2132
2133 drm_setup_crtcs(fb_helper);
2134
2135 return drm_fb_helper_single_fb_probe(fb_helper, bpp_sel);
2136}
2137EXPORT_SYMBOL(drm_fb_helper_initial_config);
2138
2139/**
2140 * drm_fb_helper_hotplug_event - respond to a hotplug notification by
2141 * probing all the outputs attached to the fb
2142 * @fb_helper: the drm_fb_helper
2143 *
2144 * Scan the connectors attached to the fb_helper and try to put together a
2145 * setup after *notification of a change in output configuration.
2146 *
2147 * Called at runtime, takes the mode config locks to be able to check/change the
2148 * modeset configuration. Must be run from process context (which usually means
2149 * either the output polling work or a work item launched from the driver's
2150 * hotplug interrupt).
2151 *
2152 * Note that drivers may call this even before calling
2153 * drm_fb_helper_initial_config but only aftert drm_fb_helper_init. This allows
2154 * for a race-free fbcon setup and will make sure that the fbdev emulation will
2155 * not miss any hotplug events.
2156 *
2157 * RETURNS:
2158 * 0 on success and a non-zero error code otherwise.
2159 */
2160int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
2161{
2162 struct drm_device *dev = fb_helper->dev;
2163 u32 max_width, max_height;
2164
2165 if (!drm_fbdev_emulation)
2166 return 0;
2167
2168 mutex_lock(&fb_helper->dev->mode_config.mutex);
2169 if (!fb_helper->fb || !drm_fb_helper_is_bound(fb_helper)) {
2170 fb_helper->delayed_hotplug = true;
2171 mutex_unlock(&fb_helper->dev->mode_config.mutex);
2172 return 0;
2173 }
2174 DRM_DEBUG_KMS("\n");
2175
2176 max_width = fb_helper->fb->width;
2177 max_height = fb_helper->fb->height;
2178
2179 drm_fb_helper_probe_connector_modes(fb_helper, max_width, max_height);
2180 mutex_unlock(&fb_helper->dev->mode_config.mutex);
2181
2182 drm_modeset_lock_all(dev);
2183 drm_setup_crtcs(fb_helper);
2184 drm_modeset_unlock_all(dev);
2185 drm_fb_helper_set_par(fb_helper->fbdev);
2186
2187 return 0;
2188}
2189EXPORT_SYMBOL(drm_fb_helper_hotplug_event);
2190
2191/* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT)
2192 * but the module doesn't depend on any fb console symbols. At least
2193 * attempt to load fbcon to avoid leaving the system without a usable console.
2194 */
2195int __init drm_fb_helper_modinit(void)
2196{
2197#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
2198 const char *name = "fbcon";
2199 struct module *fbcon;
2200
2201 mutex_lock(&module_mutex);
2202 fbcon = find_module(name);
2203 mutex_unlock(&module_mutex);
2204
2205 if (!fbcon)
2206 request_module_nowait(name);
2207#endif
2208 return 0;
2209}
2210EXPORT_SYMBOL(drm_fb_helper_modinit);
1/*
2 * Copyright (c) 2006-2009 Red Hat Inc.
3 * Copyright (c) 2006-2008 Intel Corporation
4 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
5 *
6 * DRM framebuffer helper functions
7 *
8 * Permission to use, copy, modify, distribute, and sell this software and its
9 * documentation for any purpose is hereby granted without fee, provided that
10 * the above copyright notice appear in all copies and that both that copyright
11 * notice and this permission notice appear in supporting documentation, and
12 * that the name of the copyright holders not be used in advertising or
13 * publicity pertaining to distribution of the software without specific,
14 * written prior permission. The copyright holders make no representations
15 * about the suitability of this software for any purpose. It is provided "as
16 * is" without express or implied warranty.
17 *
18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
24 * OF THIS SOFTWARE.
25 *
26 * Authors:
27 * Dave Airlie <airlied@linux.ie>
28 * Jesse Barnes <jesse.barnes@intel.com>
29 */
30#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
31
32#include <linux/console.h>
33#include <linux/kernel.h>
34#include <linux/sysrq.h>
35#include <linux/slab.h>
36#include <linux/module.h>
37#include <drm/drmP.h>
38#include <drm/drm_crtc.h>
39#include <drm/drm_fb_helper.h>
40#include <drm/drm_crtc_helper.h>
41#include <drm/drm_atomic.h>
42#include <drm/drm_atomic_helper.h>
43
44#include "drm_crtc_internal.h"
45#include "drm_crtc_helper_internal.h"
46
47static bool drm_fbdev_emulation = true;
48module_param_named(fbdev_emulation, drm_fbdev_emulation, bool, 0600);
49MODULE_PARM_DESC(fbdev_emulation,
50 "Enable legacy fbdev emulation [default=true]");
51
52static int drm_fbdev_overalloc = CONFIG_DRM_FBDEV_OVERALLOC;
53module_param(drm_fbdev_overalloc, int, 0444);
54MODULE_PARM_DESC(drm_fbdev_overalloc,
55 "Overallocation of the fbdev buffer (%) [default="
56 __MODULE_STRING(CONFIG_DRM_FBDEV_OVERALLOC) "]");
57
58static LIST_HEAD(kernel_fb_helper_list);
59static DEFINE_MUTEX(kernel_fb_helper_lock);
60
61/**
62 * DOC: fbdev helpers
63 *
64 * The fb helper functions are useful to provide an fbdev on top of a drm kernel
65 * mode setting driver. They can be used mostly independently from the crtc
66 * helper functions used by many drivers to implement the kernel mode setting
67 * interfaces.
68 *
69 * Setup fbdev emulation by calling drm_fb_helper_fbdev_setup() and tear it
70 * down by calling drm_fb_helper_fbdev_teardown().
71 *
72 * Drivers that need to handle connector hotplugging (e.g. dp mst) can't use
73 * the setup helper and will need to do the whole four-step setup process with
74 * drm_fb_helper_prepare(), drm_fb_helper_init(),
75 * drm_fb_helper_single_add_all_connectors(), enable hotplugging and
76 * drm_fb_helper_initial_config() to avoid a possible race window.
77 *
78 * At runtime drivers should restore the fbdev console by using
79 * drm_fb_helper_lastclose() as their &drm_driver.lastclose callback.
80 * They should also notify the fb helper code from updates to the output
81 * configuration by using drm_fb_helper_output_poll_changed() as their
82 * &drm_mode_config_funcs.output_poll_changed callback.
83 *
84 * For suspend/resume consider using drm_mode_config_helper_suspend() and
85 * drm_mode_config_helper_resume() which takes care of fbdev as well.
86 *
87 * All other functions exported by the fb helper library can be used to
88 * implement the fbdev driver interface by the driver.
89 *
90 * It is possible, though perhaps somewhat tricky, to implement race-free
91 * hotplug detection using the fbdev helpers. The drm_fb_helper_prepare()
92 * helper must be called first to initialize the minimum required to make
93 * hotplug detection work. Drivers also need to make sure to properly set up
94 * the &drm_mode_config.funcs member. After calling drm_kms_helper_poll_init()
95 * it is safe to enable interrupts and start processing hotplug events. At the
96 * same time, drivers should initialize all modeset objects such as CRTCs,
97 * encoders and connectors. To finish up the fbdev helper initialization, the
98 * drm_fb_helper_init() function is called. To probe for all attached displays
99 * and set up an initial configuration using the detected hardware, drivers
100 * should call drm_fb_helper_single_add_all_connectors() followed by
101 * drm_fb_helper_initial_config().
102 *
103 * If &drm_framebuffer_funcs.dirty is set, the
104 * drm_fb_helper_{cfb,sys}_{write,fillrect,copyarea,imageblit} functions will
105 * accumulate changes and schedule &drm_fb_helper.dirty_work to run right
106 * away. This worker then calls the dirty() function ensuring that it will
107 * always run in process context since the fb_*() function could be running in
108 * atomic context. If drm_fb_helper_deferred_io() is used as the deferred_io
109 * callback it will also schedule dirty_work with the damage collected from the
110 * mmap page writes. Drivers can use drm_fb_helper_defio_init() to setup
111 * deferred I/O (coupled with drm_fb_helper_fbdev_teardown()).
112 */
113
114#define drm_fb_helper_for_each_connector(fbh, i__) \
115 for (({ lockdep_assert_held(&(fbh)->lock); }), \
116 i__ = 0; i__ < (fbh)->connector_count; i__++)
117
118static int __drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper,
119 struct drm_connector *connector)
120{
121 struct drm_fb_helper_connector *fb_conn;
122 struct drm_fb_helper_connector **temp;
123 unsigned int count;
124
125 if (!drm_fbdev_emulation)
126 return 0;
127
128 lockdep_assert_held(&fb_helper->lock);
129
130 count = fb_helper->connector_count + 1;
131
132 if (count > fb_helper->connector_info_alloc_count) {
133 size_t size = count * sizeof(fb_conn);
134
135 temp = krealloc(fb_helper->connector_info, size, GFP_KERNEL);
136 if (!temp)
137 return -ENOMEM;
138
139 fb_helper->connector_info_alloc_count = count;
140 fb_helper->connector_info = temp;
141 }
142
143 fb_conn = kzalloc(sizeof(*fb_conn), GFP_KERNEL);
144 if (!fb_conn)
145 return -ENOMEM;
146
147 drm_connector_get(connector);
148 fb_conn->connector = connector;
149 fb_helper->connector_info[fb_helper->connector_count++] = fb_conn;
150
151 return 0;
152}
153
154int drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper,
155 struct drm_connector *connector)
156{
157 int err;
158
159 if (!fb_helper)
160 return 0;
161
162 mutex_lock(&fb_helper->lock);
163 err = __drm_fb_helper_add_one_connector(fb_helper, connector);
164 mutex_unlock(&fb_helper->lock);
165
166 return err;
167}
168EXPORT_SYMBOL(drm_fb_helper_add_one_connector);
169
170/**
171 * drm_fb_helper_single_add_all_connectors() - add all connectors to fbdev
172 * emulation helper
173 * @fb_helper: fbdev initialized with drm_fb_helper_init, can be NULL
174 *
175 * This functions adds all the available connectors for use with the given
176 * fb_helper. This is a separate step to allow drivers to freely assign
177 * connectors to the fbdev, e.g. if some are reserved for special purposes or
178 * not adequate to be used for the fbcon.
179 *
180 * This function is protected against concurrent connector hotadds/removals
181 * using drm_fb_helper_add_one_connector() and
182 * drm_fb_helper_remove_one_connector().
183 */
184int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper)
185{
186 struct drm_device *dev;
187 struct drm_connector *connector;
188 struct drm_connector_list_iter conn_iter;
189 int i, ret = 0;
190
191 if (!drm_fbdev_emulation || !fb_helper)
192 return 0;
193
194 dev = fb_helper->dev;
195
196 mutex_lock(&fb_helper->lock);
197 drm_connector_list_iter_begin(dev, &conn_iter);
198 drm_for_each_connector_iter(connector, &conn_iter) {
199 ret = __drm_fb_helper_add_one_connector(fb_helper, connector);
200 if (ret)
201 goto fail;
202 }
203 goto out;
204
205fail:
206 drm_fb_helper_for_each_connector(fb_helper, i) {
207 struct drm_fb_helper_connector *fb_helper_connector =
208 fb_helper->connector_info[i];
209
210 drm_connector_put(fb_helper_connector->connector);
211
212 kfree(fb_helper_connector);
213 fb_helper->connector_info[i] = NULL;
214 }
215 fb_helper->connector_count = 0;
216out:
217 drm_connector_list_iter_end(&conn_iter);
218 mutex_unlock(&fb_helper->lock);
219
220 return ret;
221}
222EXPORT_SYMBOL(drm_fb_helper_single_add_all_connectors);
223
224static int __drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper,
225 struct drm_connector *connector)
226{
227 struct drm_fb_helper_connector *fb_helper_connector;
228 int i, j;
229
230 if (!drm_fbdev_emulation)
231 return 0;
232
233 lockdep_assert_held(&fb_helper->lock);
234
235 drm_fb_helper_for_each_connector(fb_helper, i) {
236 if (fb_helper->connector_info[i]->connector == connector)
237 break;
238 }
239
240 if (i == fb_helper->connector_count)
241 return -EINVAL;
242 fb_helper_connector = fb_helper->connector_info[i];
243 drm_connector_put(fb_helper_connector->connector);
244
245 for (j = i + 1; j < fb_helper->connector_count; j++)
246 fb_helper->connector_info[j - 1] = fb_helper->connector_info[j];
247
248 fb_helper->connector_count--;
249 kfree(fb_helper_connector);
250
251 return 0;
252}
253
254int drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper,
255 struct drm_connector *connector)
256{
257 int err;
258
259 if (!fb_helper)
260 return 0;
261
262 mutex_lock(&fb_helper->lock);
263 err = __drm_fb_helper_remove_one_connector(fb_helper, connector);
264 mutex_unlock(&fb_helper->lock);
265
266 return err;
267}
268EXPORT_SYMBOL(drm_fb_helper_remove_one_connector);
269
270static void drm_fb_helper_restore_lut_atomic(struct drm_crtc *crtc)
271{
272 uint16_t *r_base, *g_base, *b_base;
273
274 if (crtc->funcs->gamma_set == NULL)
275 return;
276
277 r_base = crtc->gamma_store;
278 g_base = r_base + crtc->gamma_size;
279 b_base = g_base + crtc->gamma_size;
280
281 crtc->funcs->gamma_set(crtc, r_base, g_base, b_base,
282 crtc->gamma_size, NULL);
283}
284
285/**
286 * drm_fb_helper_debug_enter - implementation for &fb_ops.fb_debug_enter
287 * @info: fbdev registered by the helper
288 */
289int drm_fb_helper_debug_enter(struct fb_info *info)
290{
291 struct drm_fb_helper *helper = info->par;
292 const struct drm_crtc_helper_funcs *funcs;
293 int i;
294
295 list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
296 for (i = 0; i < helper->crtc_count; i++) {
297 struct drm_mode_set *mode_set =
298 &helper->crtc_info[i].mode_set;
299
300 if (!mode_set->crtc->enabled)
301 continue;
302
303 funcs = mode_set->crtc->helper_private;
304 if (funcs->mode_set_base_atomic == NULL)
305 continue;
306
307 if (drm_drv_uses_atomic_modeset(mode_set->crtc->dev))
308 continue;
309
310 funcs->mode_set_base_atomic(mode_set->crtc,
311 mode_set->fb,
312 mode_set->x,
313 mode_set->y,
314 ENTER_ATOMIC_MODE_SET);
315 }
316 }
317
318 return 0;
319}
320EXPORT_SYMBOL(drm_fb_helper_debug_enter);
321
322/**
323 * drm_fb_helper_debug_leave - implementation for &fb_ops.fb_debug_leave
324 * @info: fbdev registered by the helper
325 */
326int drm_fb_helper_debug_leave(struct fb_info *info)
327{
328 struct drm_fb_helper *helper = info->par;
329 struct drm_crtc *crtc;
330 const struct drm_crtc_helper_funcs *funcs;
331 struct drm_framebuffer *fb;
332 int i;
333
334 for (i = 0; i < helper->crtc_count; i++) {
335 struct drm_mode_set *mode_set = &helper->crtc_info[i].mode_set;
336
337 crtc = mode_set->crtc;
338 if (drm_drv_uses_atomic_modeset(crtc->dev))
339 continue;
340
341 funcs = crtc->helper_private;
342 fb = crtc->primary->fb;
343
344 if (!crtc->enabled)
345 continue;
346
347 if (!fb) {
348 DRM_ERROR("no fb to restore??\n");
349 continue;
350 }
351
352 if (funcs->mode_set_base_atomic == NULL)
353 continue;
354
355 drm_fb_helper_restore_lut_atomic(mode_set->crtc);
356 funcs->mode_set_base_atomic(mode_set->crtc, fb, crtc->x,
357 crtc->y, LEAVE_ATOMIC_MODE_SET);
358 }
359
360 return 0;
361}
362EXPORT_SYMBOL(drm_fb_helper_debug_leave);
363
364static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active)
365{
366 struct drm_device *dev = fb_helper->dev;
367 struct drm_plane_state *plane_state;
368 struct drm_plane *plane;
369 struct drm_atomic_state *state;
370 int i, ret;
371 unsigned int plane_mask;
372 struct drm_modeset_acquire_ctx ctx;
373
374 drm_modeset_acquire_init(&ctx, 0);
375
376 state = drm_atomic_state_alloc(dev);
377 if (!state) {
378 ret = -ENOMEM;
379 goto out_ctx;
380 }
381
382 state->acquire_ctx = &ctx;
383retry:
384 plane_mask = 0;
385 drm_for_each_plane(plane, dev) {
386 plane_state = drm_atomic_get_plane_state(state, plane);
387 if (IS_ERR(plane_state)) {
388 ret = PTR_ERR(plane_state);
389 goto out_state;
390 }
391
392 plane_state->rotation = DRM_MODE_ROTATE_0;
393
394 plane->old_fb = plane->fb;
395 plane_mask |= 1 << drm_plane_index(plane);
396
397 /* disable non-primary: */
398 if (plane->type == DRM_PLANE_TYPE_PRIMARY)
399 continue;
400
401 ret = __drm_atomic_helper_disable_plane(plane, plane_state);
402 if (ret != 0)
403 goto out_state;
404 }
405
406 for (i = 0; i < fb_helper->crtc_count; i++) {
407 struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
408 struct drm_plane *primary = mode_set->crtc->primary;
409
410 /* Cannot fail as we've already gotten the plane state above */
411 plane_state = drm_atomic_get_new_plane_state(state, primary);
412 plane_state->rotation = fb_helper->crtc_info[i].rotation;
413
414 ret = __drm_atomic_helper_set_config(mode_set, state);
415 if (ret != 0)
416 goto out_state;
417
418 /*
419 * __drm_atomic_helper_set_config() sets active when a
420 * mode is set, unconditionally clear it if we force DPMS off
421 */
422 if (!active) {
423 struct drm_crtc *crtc = mode_set->crtc;
424 struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
425
426 crtc_state->active = false;
427 }
428 }
429
430 ret = drm_atomic_commit(state);
431
432out_state:
433 drm_atomic_clean_old_fb(dev, plane_mask, ret);
434
435 if (ret == -EDEADLK)
436 goto backoff;
437
438 drm_atomic_state_put(state);
439out_ctx:
440 drm_modeset_drop_locks(&ctx);
441 drm_modeset_acquire_fini(&ctx);
442
443 return ret;
444
445backoff:
446 drm_atomic_state_clear(state);
447 drm_modeset_backoff(&ctx);
448
449 goto retry;
450}
451
452static int restore_fbdev_mode_legacy(struct drm_fb_helper *fb_helper)
453{
454 struct drm_device *dev = fb_helper->dev;
455 struct drm_plane *plane;
456 int i, ret = 0;
457
458 drm_modeset_lock_all(fb_helper->dev);
459 drm_for_each_plane(plane, dev) {
460 if (plane->type != DRM_PLANE_TYPE_PRIMARY)
461 drm_plane_force_disable(plane);
462
463 if (plane->rotation_property)
464 drm_mode_plane_set_obj_prop(plane,
465 plane->rotation_property,
466 DRM_MODE_ROTATE_0);
467 }
468
469 for (i = 0; i < fb_helper->crtc_count; i++) {
470 struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
471 struct drm_crtc *crtc = mode_set->crtc;
472
473 if (crtc->funcs->cursor_set2) {
474 ret = crtc->funcs->cursor_set2(crtc, NULL, 0, 0, 0, 0, 0);
475 if (ret)
476 goto out;
477 } else if (crtc->funcs->cursor_set) {
478 ret = crtc->funcs->cursor_set(crtc, NULL, 0, 0, 0);
479 if (ret)
480 goto out;
481 }
482
483 ret = drm_mode_set_config_internal(mode_set);
484 if (ret)
485 goto out;
486 }
487out:
488 drm_modeset_unlock_all(fb_helper->dev);
489
490 return ret;
491}
492
493static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
494{
495 struct drm_device *dev = fb_helper->dev;
496
497 if (drm_drv_uses_atomic_modeset(dev))
498 return restore_fbdev_mode_atomic(fb_helper, true);
499 else
500 return restore_fbdev_mode_legacy(fb_helper);
501}
502
503/**
504 * drm_fb_helper_restore_fbdev_mode_unlocked - restore fbdev configuration
505 * @fb_helper: driver-allocated fbdev helper, can be NULL
506 *
507 * This should be called from driver's drm &drm_driver.lastclose callback
508 * when implementing an fbcon on top of kms using this helper. This ensures that
509 * the user isn't greeted with a black screen when e.g. X dies.
510 *
511 * RETURNS:
512 * Zero if everything went ok, negative error code otherwise.
513 */
514int drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper)
515{
516 bool do_delayed;
517 int ret;
518
519 if (!drm_fbdev_emulation || !fb_helper)
520 return -ENODEV;
521
522 if (READ_ONCE(fb_helper->deferred_setup))
523 return 0;
524
525 mutex_lock(&fb_helper->lock);
526 ret = restore_fbdev_mode(fb_helper);
527
528 do_delayed = fb_helper->delayed_hotplug;
529 if (do_delayed)
530 fb_helper->delayed_hotplug = false;
531 mutex_unlock(&fb_helper->lock);
532
533 if (do_delayed)
534 drm_fb_helper_hotplug_event(fb_helper);
535
536 return ret;
537}
538EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode_unlocked);
539
540static bool drm_fb_helper_is_bound(struct drm_fb_helper *fb_helper)
541{
542 struct drm_device *dev = fb_helper->dev;
543 struct drm_crtc *crtc;
544 int bound = 0, crtcs_bound = 0;
545
546 /*
547 * Sometimes user space wants everything disabled, so don't steal the
548 * display if there's a master.
549 */
550 if (READ_ONCE(dev->master))
551 return false;
552
553 drm_for_each_crtc(crtc, dev) {
554 drm_modeset_lock(&crtc->mutex, NULL);
555 if (crtc->primary->fb)
556 crtcs_bound++;
557 if (crtc->primary->fb == fb_helper->fb)
558 bound++;
559 drm_modeset_unlock(&crtc->mutex);
560 }
561
562 if (bound < crtcs_bound)
563 return false;
564
565 return true;
566}
567
568#ifdef CONFIG_MAGIC_SYSRQ
569/*
570 * restore fbcon display for all kms driver's using this helper, used for sysrq
571 * and panic handling.
572 */
573static bool drm_fb_helper_force_kernel_mode(void)
574{
575 bool ret, error = false;
576 struct drm_fb_helper *helper;
577
578 if (list_empty(&kernel_fb_helper_list))
579 return false;
580
581 list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
582 struct drm_device *dev = helper->dev;
583
584 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
585 continue;
586
587 mutex_lock(&helper->lock);
588 ret = restore_fbdev_mode(helper);
589 if (ret)
590 error = true;
591 mutex_unlock(&helper->lock);
592 }
593 return error;
594}
595
596static void drm_fb_helper_restore_work_fn(struct work_struct *ignored)
597{
598 bool ret;
599
600 ret = drm_fb_helper_force_kernel_mode();
601 if (ret == true)
602 DRM_ERROR("Failed to restore crtc configuration\n");
603}
604static DECLARE_WORK(drm_fb_helper_restore_work, drm_fb_helper_restore_work_fn);
605
606static void drm_fb_helper_sysrq(int dummy1)
607{
608 schedule_work(&drm_fb_helper_restore_work);
609}
610
611static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = {
612 .handler = drm_fb_helper_sysrq,
613 .help_msg = "force-fb(V)",
614 .action_msg = "Restore framebuffer console",
615};
616#else
617static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = { };
618#endif
619
620static void dpms_legacy(struct drm_fb_helper *fb_helper, int dpms_mode)
621{
622 struct drm_device *dev = fb_helper->dev;
623 struct drm_crtc *crtc;
624 struct drm_connector *connector;
625 int i, j;
626
627 drm_modeset_lock_all(dev);
628 for (i = 0; i < fb_helper->crtc_count; i++) {
629 crtc = fb_helper->crtc_info[i].mode_set.crtc;
630
631 if (!crtc->enabled)
632 continue;
633
634 /* Walk the connectors & encoders on this fb turning them on/off */
635 drm_fb_helper_for_each_connector(fb_helper, j) {
636 connector = fb_helper->connector_info[j]->connector;
637 connector->funcs->dpms(connector, dpms_mode);
638 drm_object_property_set_value(&connector->base,
639 dev->mode_config.dpms_property, dpms_mode);
640 }
641 }
642 drm_modeset_unlock_all(dev);
643}
644
645static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode)
646{
647 struct drm_fb_helper *fb_helper = info->par;
648
649 /*
650 * For each CRTC in this fb, turn the connectors on/off.
651 */
652 mutex_lock(&fb_helper->lock);
653 if (!drm_fb_helper_is_bound(fb_helper)) {
654 mutex_unlock(&fb_helper->lock);
655 return;
656 }
657
658 if (drm_drv_uses_atomic_modeset(fb_helper->dev))
659 restore_fbdev_mode_atomic(fb_helper, dpms_mode == DRM_MODE_DPMS_ON);
660 else
661 dpms_legacy(fb_helper, dpms_mode);
662 mutex_unlock(&fb_helper->lock);
663}
664
665/**
666 * drm_fb_helper_blank - implementation for &fb_ops.fb_blank
667 * @blank: desired blanking state
668 * @info: fbdev registered by the helper
669 */
670int drm_fb_helper_blank(int blank, struct fb_info *info)
671{
672 if (oops_in_progress)
673 return -EBUSY;
674
675 switch (blank) {
676 /* Display: On; HSync: On, VSync: On */
677 case FB_BLANK_UNBLANK:
678 drm_fb_helper_dpms(info, DRM_MODE_DPMS_ON);
679 break;
680 /* Display: Off; HSync: On, VSync: On */
681 case FB_BLANK_NORMAL:
682 drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
683 break;
684 /* Display: Off; HSync: Off, VSync: On */
685 case FB_BLANK_HSYNC_SUSPEND:
686 drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
687 break;
688 /* Display: Off; HSync: On, VSync: Off */
689 case FB_BLANK_VSYNC_SUSPEND:
690 drm_fb_helper_dpms(info, DRM_MODE_DPMS_SUSPEND);
691 break;
692 /* Display: Off; HSync: Off, VSync: Off */
693 case FB_BLANK_POWERDOWN:
694 drm_fb_helper_dpms(info, DRM_MODE_DPMS_OFF);
695 break;
696 }
697 return 0;
698}
699EXPORT_SYMBOL(drm_fb_helper_blank);
700
701static void drm_fb_helper_modeset_release(struct drm_fb_helper *helper,
702 struct drm_mode_set *modeset)
703{
704 int i;
705
706 for (i = 0; i < modeset->num_connectors; i++) {
707 drm_connector_put(modeset->connectors[i]);
708 modeset->connectors[i] = NULL;
709 }
710 modeset->num_connectors = 0;
711
712 drm_mode_destroy(helper->dev, modeset->mode);
713 modeset->mode = NULL;
714
715 /* FIXME should hold a ref? */
716 modeset->fb = NULL;
717}
718
719static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper)
720{
721 int i;
722
723 for (i = 0; i < helper->connector_count; i++) {
724 drm_connector_put(helper->connector_info[i]->connector);
725 kfree(helper->connector_info[i]);
726 }
727 kfree(helper->connector_info);
728
729 for (i = 0; i < helper->crtc_count; i++) {
730 struct drm_mode_set *modeset = &helper->crtc_info[i].mode_set;
731
732 drm_fb_helper_modeset_release(helper, modeset);
733 kfree(modeset->connectors);
734 }
735 kfree(helper->crtc_info);
736}
737
738static void drm_fb_helper_resume_worker(struct work_struct *work)
739{
740 struct drm_fb_helper *helper = container_of(work, struct drm_fb_helper,
741 resume_work);
742
743 console_lock();
744 fb_set_suspend(helper->fbdev, 0);
745 console_unlock();
746}
747
748static void drm_fb_helper_dirty_work(struct work_struct *work)
749{
750 struct drm_fb_helper *helper = container_of(work, struct drm_fb_helper,
751 dirty_work);
752 struct drm_clip_rect *clip = &helper->dirty_clip;
753 struct drm_clip_rect clip_copy;
754 unsigned long flags;
755
756 spin_lock_irqsave(&helper->dirty_lock, flags);
757 clip_copy = *clip;
758 clip->x1 = clip->y1 = ~0;
759 clip->x2 = clip->y2 = 0;
760 spin_unlock_irqrestore(&helper->dirty_lock, flags);
761
762 /* call dirty callback only when it has been really touched */
763 if (clip_copy.x1 < clip_copy.x2 && clip_copy.y1 < clip_copy.y2)
764 helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1);
765}
766
767/**
768 * drm_fb_helper_prepare - setup a drm_fb_helper structure
769 * @dev: DRM device
770 * @helper: driver-allocated fbdev helper structure to set up
771 * @funcs: pointer to structure of functions associate with this helper
772 *
773 * Sets up the bare minimum to make the framebuffer helper usable. This is
774 * useful to implement race-free initialization of the polling helpers.
775 */
776void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
777 const struct drm_fb_helper_funcs *funcs)
778{
779 INIT_LIST_HEAD(&helper->kernel_fb_list);
780 spin_lock_init(&helper->dirty_lock);
781 INIT_WORK(&helper->resume_work, drm_fb_helper_resume_worker);
782 INIT_WORK(&helper->dirty_work, drm_fb_helper_dirty_work);
783 helper->dirty_clip.x1 = helper->dirty_clip.y1 = ~0;
784 mutex_init(&helper->lock);
785 helper->funcs = funcs;
786 helper->dev = dev;
787}
788EXPORT_SYMBOL(drm_fb_helper_prepare);
789
790/**
791 * drm_fb_helper_init - initialize a &struct drm_fb_helper
792 * @dev: drm device
793 * @fb_helper: driver-allocated fbdev helper structure to initialize
794 * @max_conn_count: max connector count
795 *
796 * This allocates the structures for the fbdev helper with the given limits.
797 * Note that this won't yet touch the hardware (through the driver interfaces)
798 * nor register the fbdev. This is only done in drm_fb_helper_initial_config()
799 * to allow driver writes more control over the exact init sequence.
800 *
801 * Drivers must call drm_fb_helper_prepare() before calling this function.
802 *
803 * RETURNS:
804 * Zero if everything went ok, nonzero otherwise.
805 */
806int drm_fb_helper_init(struct drm_device *dev,
807 struct drm_fb_helper *fb_helper,
808 int max_conn_count)
809{
810 struct drm_crtc *crtc;
811 struct drm_mode_config *config = &dev->mode_config;
812 int i;
813
814 if (!drm_fbdev_emulation) {
815 dev->fb_helper = fb_helper;
816 return 0;
817 }
818
819 if (!max_conn_count)
820 return -EINVAL;
821
822 fb_helper->crtc_info = kcalloc(config->num_crtc, sizeof(struct drm_fb_helper_crtc), GFP_KERNEL);
823 if (!fb_helper->crtc_info)
824 return -ENOMEM;
825
826 fb_helper->crtc_count = config->num_crtc;
827 fb_helper->connector_info = kcalloc(dev->mode_config.num_connector, sizeof(struct drm_fb_helper_connector *), GFP_KERNEL);
828 if (!fb_helper->connector_info) {
829 kfree(fb_helper->crtc_info);
830 return -ENOMEM;
831 }
832 fb_helper->connector_info_alloc_count = dev->mode_config.num_connector;
833 fb_helper->connector_count = 0;
834
835 for (i = 0; i < fb_helper->crtc_count; i++) {
836 fb_helper->crtc_info[i].mode_set.connectors =
837 kcalloc(max_conn_count,
838 sizeof(struct drm_connector *),
839 GFP_KERNEL);
840
841 if (!fb_helper->crtc_info[i].mode_set.connectors)
842 goto out_free;
843 fb_helper->crtc_info[i].mode_set.num_connectors = 0;
844 fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
845 }
846
847 i = 0;
848 drm_for_each_crtc(crtc, dev) {
849 fb_helper->crtc_info[i].mode_set.crtc = crtc;
850 i++;
851 }
852
853 dev->fb_helper = fb_helper;
854
855 return 0;
856out_free:
857 drm_fb_helper_crtc_free(fb_helper);
858 return -ENOMEM;
859}
860EXPORT_SYMBOL(drm_fb_helper_init);
861
862/**
863 * drm_fb_helper_alloc_fbi - allocate fb_info and some of its members
864 * @fb_helper: driver-allocated fbdev helper
865 *
866 * A helper to alloc fb_info and the members cmap and apertures. Called
867 * by the driver within the fb_probe fb_helper callback function. Drivers do not
868 * need to release the allocated fb_info structure themselves, this is
869 * automatically done when calling drm_fb_helper_fini().
870 *
871 * RETURNS:
872 * fb_info pointer if things went okay, pointer containing error code
873 * otherwise
874 */
875struct fb_info *drm_fb_helper_alloc_fbi(struct drm_fb_helper *fb_helper)
876{
877 struct device *dev = fb_helper->dev->dev;
878 struct fb_info *info;
879 int ret;
880
881 info = framebuffer_alloc(0, dev);
882 if (!info)
883 return ERR_PTR(-ENOMEM);
884
885 ret = fb_alloc_cmap(&info->cmap, 256, 0);
886 if (ret)
887 goto err_release;
888
889 info->apertures = alloc_apertures(1);
890 if (!info->apertures) {
891 ret = -ENOMEM;
892 goto err_free_cmap;
893 }
894
895 fb_helper->fbdev = info;
896
897 return info;
898
899err_free_cmap:
900 fb_dealloc_cmap(&info->cmap);
901err_release:
902 framebuffer_release(info);
903 return ERR_PTR(ret);
904}
905EXPORT_SYMBOL(drm_fb_helper_alloc_fbi);
906
907/**
908 * drm_fb_helper_unregister_fbi - unregister fb_info framebuffer device
909 * @fb_helper: driver-allocated fbdev helper, can be NULL
910 *
911 * A wrapper around unregister_framebuffer, to release the fb_info
912 * framebuffer device. This must be called before releasing all resources for
913 * @fb_helper by calling drm_fb_helper_fini().
914 */
915void drm_fb_helper_unregister_fbi(struct drm_fb_helper *fb_helper)
916{
917 if (fb_helper && fb_helper->fbdev)
918 unregister_framebuffer(fb_helper->fbdev);
919}
920EXPORT_SYMBOL(drm_fb_helper_unregister_fbi);
921
922/**
923 * drm_fb_helper_fini - finialize a &struct drm_fb_helper
924 * @fb_helper: driver-allocated fbdev helper, can be NULL
925 *
926 * This cleans up all remaining resources associated with @fb_helper. Must be
927 * called after drm_fb_helper_unlink_fbi() was called.
928 */
929void drm_fb_helper_fini(struct drm_fb_helper *fb_helper)
930{
931 struct fb_info *info;
932
933 if (!fb_helper)
934 return;
935
936 fb_helper->dev->fb_helper = NULL;
937
938 if (!drm_fbdev_emulation)
939 return;
940
941 cancel_work_sync(&fb_helper->resume_work);
942 cancel_work_sync(&fb_helper->dirty_work);
943
944 info = fb_helper->fbdev;
945 if (info) {
946 if (info->cmap.len)
947 fb_dealloc_cmap(&info->cmap);
948 framebuffer_release(info);
949 }
950 fb_helper->fbdev = NULL;
951
952 mutex_lock(&kernel_fb_helper_lock);
953 if (!list_empty(&fb_helper->kernel_fb_list)) {
954 list_del(&fb_helper->kernel_fb_list);
955 if (list_empty(&kernel_fb_helper_list))
956 unregister_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
957 }
958 mutex_unlock(&kernel_fb_helper_lock);
959
960 mutex_destroy(&fb_helper->lock);
961 drm_fb_helper_crtc_free(fb_helper);
962
963}
964EXPORT_SYMBOL(drm_fb_helper_fini);
965
966/**
967 * drm_fb_helper_unlink_fbi - wrapper around unlink_framebuffer
968 * @fb_helper: driver-allocated fbdev helper, can be NULL
969 *
970 * A wrapper around unlink_framebuffer implemented by fbdev core
971 */
972void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper)
973{
974 if (fb_helper && fb_helper->fbdev)
975 unlink_framebuffer(fb_helper->fbdev);
976}
977EXPORT_SYMBOL(drm_fb_helper_unlink_fbi);
978
979static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y,
980 u32 width, u32 height)
981{
982 struct drm_fb_helper *helper = info->par;
983 struct drm_clip_rect *clip = &helper->dirty_clip;
984 unsigned long flags;
985
986 if (!helper->fb->funcs->dirty)
987 return;
988
989 spin_lock_irqsave(&helper->dirty_lock, flags);
990 clip->x1 = min_t(u32, clip->x1, x);
991 clip->y1 = min_t(u32, clip->y1, y);
992 clip->x2 = max_t(u32, clip->x2, x + width);
993 clip->y2 = max_t(u32, clip->y2, y + height);
994 spin_unlock_irqrestore(&helper->dirty_lock, flags);
995
996 schedule_work(&helper->dirty_work);
997}
998
999/**
1000 * drm_fb_helper_deferred_io() - fbdev deferred_io callback function
1001 * @info: fb_info struct pointer
1002 * @pagelist: list of dirty mmap framebuffer pages
1003 *
1004 * This function is used as the &fb_deferred_io.deferred_io
1005 * callback function for flushing the fbdev mmap writes.
1006 */
1007void drm_fb_helper_deferred_io(struct fb_info *info,
1008 struct list_head *pagelist)
1009{
1010 unsigned long start, end, min, max;
1011 struct page *page;
1012 u32 y1, y2;
1013
1014 min = ULONG_MAX;
1015 max = 0;
1016 list_for_each_entry(page, pagelist, lru) {
1017 start = page->index << PAGE_SHIFT;
1018 end = start + PAGE_SIZE - 1;
1019 min = min(min, start);
1020 max = max(max, end);
1021 }
1022
1023 if (min < max) {
1024 y1 = min / info->fix.line_length;
1025 y2 = min_t(u32, DIV_ROUND_UP(max, info->fix.line_length),
1026 info->var.yres);
1027 drm_fb_helper_dirty(info, 0, y1, info->var.xres, y2 - y1);
1028 }
1029}
1030EXPORT_SYMBOL(drm_fb_helper_deferred_io);
1031
1032/**
1033 * drm_fb_helper_defio_init - fbdev deferred I/O initialization
1034 * @fb_helper: driver-allocated fbdev helper
1035 *
1036 * This function allocates &fb_deferred_io, sets callback to
1037 * drm_fb_helper_deferred_io(), delay to 50ms and calls fb_deferred_io_init().
1038 * It should be called from the &drm_fb_helper_funcs->fb_probe callback.
1039 * drm_fb_helper_fbdev_teardown() cleans up deferred I/O.
1040 *
1041 * NOTE: A copy of &fb_ops is made and assigned to &info->fbops. This is done
1042 * because fb_deferred_io_cleanup() clears &fbops->fb_mmap and would thereby
1043 * affect other instances of that &fb_ops.
1044 *
1045 * Returns:
1046 * 0 on success or a negative error code on failure.
1047 */
1048int drm_fb_helper_defio_init(struct drm_fb_helper *fb_helper)
1049{
1050 struct fb_info *info = fb_helper->fbdev;
1051 struct fb_deferred_io *fbdefio;
1052 struct fb_ops *fbops;
1053
1054 fbdefio = kzalloc(sizeof(*fbdefio), GFP_KERNEL);
1055 fbops = kzalloc(sizeof(*fbops), GFP_KERNEL);
1056 if (!fbdefio || !fbops) {
1057 kfree(fbdefio);
1058 kfree(fbops);
1059 return -ENOMEM;
1060 }
1061
1062 info->fbdefio = fbdefio;
1063 fbdefio->delay = msecs_to_jiffies(50);
1064 fbdefio->deferred_io = drm_fb_helper_deferred_io;
1065
1066 *fbops = *info->fbops;
1067 info->fbops = fbops;
1068
1069 fb_deferred_io_init(info);
1070
1071 return 0;
1072}
1073EXPORT_SYMBOL(drm_fb_helper_defio_init);
1074
1075/**
1076 * drm_fb_helper_sys_read - wrapper around fb_sys_read
1077 * @info: fb_info struct pointer
1078 * @buf: userspace buffer to read from framebuffer memory
1079 * @count: number of bytes to read from framebuffer memory
1080 * @ppos: read offset within framebuffer memory
1081 *
1082 * A wrapper around fb_sys_read implemented by fbdev core
1083 */
1084ssize_t drm_fb_helper_sys_read(struct fb_info *info, char __user *buf,
1085 size_t count, loff_t *ppos)
1086{
1087 return fb_sys_read(info, buf, count, ppos);
1088}
1089EXPORT_SYMBOL(drm_fb_helper_sys_read);
1090
1091/**
1092 * drm_fb_helper_sys_write - wrapper around fb_sys_write
1093 * @info: fb_info struct pointer
1094 * @buf: userspace buffer to write to framebuffer memory
1095 * @count: number of bytes to write to framebuffer memory
1096 * @ppos: write offset within framebuffer memory
1097 *
1098 * A wrapper around fb_sys_write implemented by fbdev core
1099 */
1100ssize_t drm_fb_helper_sys_write(struct fb_info *info, const char __user *buf,
1101 size_t count, loff_t *ppos)
1102{
1103 ssize_t ret;
1104
1105 ret = fb_sys_write(info, buf, count, ppos);
1106 if (ret > 0)
1107 drm_fb_helper_dirty(info, 0, 0, info->var.xres,
1108 info->var.yres);
1109
1110 return ret;
1111}
1112EXPORT_SYMBOL(drm_fb_helper_sys_write);
1113
1114/**
1115 * drm_fb_helper_sys_fillrect - wrapper around sys_fillrect
1116 * @info: fbdev registered by the helper
1117 * @rect: info about rectangle to fill
1118 *
1119 * A wrapper around sys_fillrect implemented by fbdev core
1120 */
1121void drm_fb_helper_sys_fillrect(struct fb_info *info,
1122 const struct fb_fillrect *rect)
1123{
1124 sys_fillrect(info, rect);
1125 drm_fb_helper_dirty(info, rect->dx, rect->dy,
1126 rect->width, rect->height);
1127}
1128EXPORT_SYMBOL(drm_fb_helper_sys_fillrect);
1129
1130/**
1131 * drm_fb_helper_sys_copyarea - wrapper around sys_copyarea
1132 * @info: fbdev registered by the helper
1133 * @area: info about area to copy
1134 *
1135 * A wrapper around sys_copyarea implemented by fbdev core
1136 */
1137void drm_fb_helper_sys_copyarea(struct fb_info *info,
1138 const struct fb_copyarea *area)
1139{
1140 sys_copyarea(info, area);
1141 drm_fb_helper_dirty(info, area->dx, area->dy,
1142 area->width, area->height);
1143}
1144EXPORT_SYMBOL(drm_fb_helper_sys_copyarea);
1145
1146/**
1147 * drm_fb_helper_sys_imageblit - wrapper around sys_imageblit
1148 * @info: fbdev registered by the helper
1149 * @image: info about image to blit
1150 *
1151 * A wrapper around sys_imageblit implemented by fbdev core
1152 */
1153void drm_fb_helper_sys_imageblit(struct fb_info *info,
1154 const struct fb_image *image)
1155{
1156 sys_imageblit(info, image);
1157 drm_fb_helper_dirty(info, image->dx, image->dy,
1158 image->width, image->height);
1159}
1160EXPORT_SYMBOL(drm_fb_helper_sys_imageblit);
1161
1162/**
1163 * drm_fb_helper_cfb_fillrect - wrapper around cfb_fillrect
1164 * @info: fbdev registered by the helper
1165 * @rect: info about rectangle to fill
1166 *
1167 * A wrapper around cfb_imageblit implemented by fbdev core
1168 */
1169void drm_fb_helper_cfb_fillrect(struct fb_info *info,
1170 const struct fb_fillrect *rect)
1171{
1172 cfb_fillrect(info, rect);
1173 drm_fb_helper_dirty(info, rect->dx, rect->dy,
1174 rect->width, rect->height);
1175}
1176EXPORT_SYMBOL(drm_fb_helper_cfb_fillrect);
1177
1178/**
1179 * drm_fb_helper_cfb_copyarea - wrapper around cfb_copyarea
1180 * @info: fbdev registered by the helper
1181 * @area: info about area to copy
1182 *
1183 * A wrapper around cfb_copyarea implemented by fbdev core
1184 */
1185void drm_fb_helper_cfb_copyarea(struct fb_info *info,
1186 const struct fb_copyarea *area)
1187{
1188 cfb_copyarea(info, area);
1189 drm_fb_helper_dirty(info, area->dx, area->dy,
1190 area->width, area->height);
1191}
1192EXPORT_SYMBOL(drm_fb_helper_cfb_copyarea);
1193
1194/**
1195 * drm_fb_helper_cfb_imageblit - wrapper around cfb_imageblit
1196 * @info: fbdev registered by the helper
1197 * @image: info about image to blit
1198 *
1199 * A wrapper around cfb_imageblit implemented by fbdev core
1200 */
1201void drm_fb_helper_cfb_imageblit(struct fb_info *info,
1202 const struct fb_image *image)
1203{
1204 cfb_imageblit(info, image);
1205 drm_fb_helper_dirty(info, image->dx, image->dy,
1206 image->width, image->height);
1207}
1208EXPORT_SYMBOL(drm_fb_helper_cfb_imageblit);
1209
1210/**
1211 * drm_fb_helper_set_suspend - wrapper around fb_set_suspend
1212 * @fb_helper: driver-allocated fbdev helper, can be NULL
1213 * @suspend: whether to suspend or resume
1214 *
1215 * A wrapper around fb_set_suspend implemented by fbdev core.
1216 * Use drm_fb_helper_set_suspend_unlocked() if you don't need to take
1217 * the lock yourself
1218 */
1219void drm_fb_helper_set_suspend(struct drm_fb_helper *fb_helper, bool suspend)
1220{
1221 if (fb_helper && fb_helper->fbdev)
1222 fb_set_suspend(fb_helper->fbdev, suspend);
1223}
1224EXPORT_SYMBOL(drm_fb_helper_set_suspend);
1225
1226/**
1227 * drm_fb_helper_set_suspend_unlocked - wrapper around fb_set_suspend that also
1228 * takes the console lock
1229 * @fb_helper: driver-allocated fbdev helper, can be NULL
1230 * @suspend: whether to suspend or resume
1231 *
1232 * A wrapper around fb_set_suspend() that takes the console lock. If the lock
1233 * isn't available on resume, a worker is tasked with waiting for the lock
1234 * to become available. The console lock can be pretty contented on resume
1235 * due to all the printk activity.
1236 *
1237 * This function can be called multiple times with the same state since
1238 * &fb_info.state is checked to see if fbdev is running or not before locking.
1239 *
1240 * Use drm_fb_helper_set_suspend() if you need to take the lock yourself.
1241 */
1242void drm_fb_helper_set_suspend_unlocked(struct drm_fb_helper *fb_helper,
1243 bool suspend)
1244{
1245 if (!fb_helper || !fb_helper->fbdev)
1246 return;
1247
1248 /* make sure there's no pending/ongoing resume */
1249 flush_work(&fb_helper->resume_work);
1250
1251 if (suspend) {
1252 if (fb_helper->fbdev->state != FBINFO_STATE_RUNNING)
1253 return;
1254
1255 console_lock();
1256
1257 } else {
1258 if (fb_helper->fbdev->state == FBINFO_STATE_RUNNING)
1259 return;
1260
1261 if (!console_trylock()) {
1262 schedule_work(&fb_helper->resume_work);
1263 return;
1264 }
1265 }
1266
1267 fb_set_suspend(fb_helper->fbdev, suspend);
1268 console_unlock();
1269}
1270EXPORT_SYMBOL(drm_fb_helper_set_suspend_unlocked);
1271
1272static int setcmap_pseudo_palette(struct fb_cmap *cmap, struct fb_info *info)
1273{
1274 u32 *palette = (u32 *)info->pseudo_palette;
1275 int i;
1276
1277 if (cmap->start + cmap->len > 16)
1278 return -EINVAL;
1279
1280 for (i = 0; i < cmap->len; ++i) {
1281 u16 red = cmap->red[i];
1282 u16 green = cmap->green[i];
1283 u16 blue = cmap->blue[i];
1284 u32 value;
1285
1286 red >>= 16 - info->var.red.length;
1287 green >>= 16 - info->var.green.length;
1288 blue >>= 16 - info->var.blue.length;
1289 value = (red << info->var.red.offset) |
1290 (green << info->var.green.offset) |
1291 (blue << info->var.blue.offset);
1292 if (info->var.transp.length > 0) {
1293 u32 mask = (1 << info->var.transp.length) - 1;
1294
1295 mask <<= info->var.transp.offset;
1296 value |= mask;
1297 }
1298 palette[cmap->start + i] = value;
1299 }
1300
1301 return 0;
1302}
1303
1304static int setcmap_legacy(struct fb_cmap *cmap, struct fb_info *info)
1305{
1306 struct drm_fb_helper *fb_helper = info->par;
1307 struct drm_crtc *crtc;
1308 u16 *r, *g, *b;
1309 int i, ret = 0;
1310
1311 drm_modeset_lock_all(fb_helper->dev);
1312 for (i = 0; i < fb_helper->crtc_count; i++) {
1313 crtc = fb_helper->crtc_info[i].mode_set.crtc;
1314 if (!crtc->funcs->gamma_set || !crtc->gamma_size)
1315 return -EINVAL;
1316
1317 if (cmap->start + cmap->len > crtc->gamma_size)
1318 return -EINVAL;
1319
1320 r = crtc->gamma_store;
1321 g = r + crtc->gamma_size;
1322 b = g + crtc->gamma_size;
1323
1324 memcpy(r + cmap->start, cmap->red, cmap->len * sizeof(*r));
1325 memcpy(g + cmap->start, cmap->green, cmap->len * sizeof(*g));
1326 memcpy(b + cmap->start, cmap->blue, cmap->len * sizeof(*b));
1327
1328 ret = crtc->funcs->gamma_set(crtc, r, g, b,
1329 crtc->gamma_size, NULL);
1330 if (ret)
1331 return ret;
1332 }
1333 drm_modeset_unlock_all(fb_helper->dev);
1334
1335 return ret;
1336}
1337
1338static struct drm_property_blob *setcmap_new_gamma_lut(struct drm_crtc *crtc,
1339 struct fb_cmap *cmap)
1340{
1341 struct drm_device *dev = crtc->dev;
1342 struct drm_property_blob *gamma_lut;
1343 struct drm_color_lut *lut;
1344 int size = crtc->gamma_size;
1345 int i;
1346
1347 if (!size || cmap->start + cmap->len > size)
1348 return ERR_PTR(-EINVAL);
1349
1350 gamma_lut = drm_property_create_blob(dev, sizeof(*lut) * size, NULL);
1351 if (IS_ERR(gamma_lut))
1352 return gamma_lut;
1353
1354 lut = gamma_lut->data;
1355 if (cmap->start || cmap->len != size) {
1356 u16 *r = crtc->gamma_store;
1357 u16 *g = r + crtc->gamma_size;
1358 u16 *b = g + crtc->gamma_size;
1359
1360 for (i = 0; i < cmap->start; i++) {
1361 lut[i].red = r[i];
1362 lut[i].green = g[i];
1363 lut[i].blue = b[i];
1364 }
1365 for (i = cmap->start + cmap->len; i < size; i++) {
1366 lut[i].red = r[i];
1367 lut[i].green = g[i];
1368 lut[i].blue = b[i];
1369 }
1370 }
1371
1372 for (i = 0; i < cmap->len; i++) {
1373 lut[cmap->start + i].red = cmap->red[i];
1374 lut[cmap->start + i].green = cmap->green[i];
1375 lut[cmap->start + i].blue = cmap->blue[i];
1376 }
1377
1378 return gamma_lut;
1379}
1380
1381static int setcmap_atomic(struct fb_cmap *cmap, struct fb_info *info)
1382{
1383 struct drm_fb_helper *fb_helper = info->par;
1384 struct drm_device *dev = fb_helper->dev;
1385 struct drm_property_blob *gamma_lut = NULL;
1386 struct drm_modeset_acquire_ctx ctx;
1387 struct drm_crtc_state *crtc_state;
1388 struct drm_atomic_state *state;
1389 struct drm_crtc *crtc;
1390 u16 *r, *g, *b;
1391 int i, ret = 0;
1392 bool replaced;
1393
1394 drm_modeset_acquire_init(&ctx, 0);
1395
1396 state = drm_atomic_state_alloc(dev);
1397 if (!state) {
1398 ret = -ENOMEM;
1399 goto out_ctx;
1400 }
1401
1402 state->acquire_ctx = &ctx;
1403retry:
1404 for (i = 0; i < fb_helper->crtc_count; i++) {
1405 crtc = fb_helper->crtc_info[i].mode_set.crtc;
1406
1407 if (!gamma_lut)
1408 gamma_lut = setcmap_new_gamma_lut(crtc, cmap);
1409 if (IS_ERR(gamma_lut)) {
1410 ret = PTR_ERR(gamma_lut);
1411 gamma_lut = NULL;
1412 goto out_state;
1413 }
1414
1415 crtc_state = drm_atomic_get_crtc_state(state, crtc);
1416 if (IS_ERR(crtc_state)) {
1417 ret = PTR_ERR(crtc_state);
1418 goto out_state;
1419 }
1420
1421 replaced = drm_property_replace_blob(&crtc_state->degamma_lut,
1422 NULL);
1423 replaced |= drm_property_replace_blob(&crtc_state->ctm, NULL);
1424 replaced |= drm_property_replace_blob(&crtc_state->gamma_lut,
1425 gamma_lut);
1426 crtc_state->color_mgmt_changed |= replaced;
1427 }
1428
1429 ret = drm_atomic_commit(state);
1430 if (ret)
1431 goto out_state;
1432
1433 for (i = 0; i < fb_helper->crtc_count; i++) {
1434 crtc = fb_helper->crtc_info[i].mode_set.crtc;
1435
1436 r = crtc->gamma_store;
1437 g = r + crtc->gamma_size;
1438 b = g + crtc->gamma_size;
1439
1440 memcpy(r + cmap->start, cmap->red, cmap->len * sizeof(*r));
1441 memcpy(g + cmap->start, cmap->green, cmap->len * sizeof(*g));
1442 memcpy(b + cmap->start, cmap->blue, cmap->len * sizeof(*b));
1443 }
1444
1445out_state:
1446 if (ret == -EDEADLK)
1447 goto backoff;
1448
1449 drm_property_blob_put(gamma_lut);
1450 drm_atomic_state_put(state);
1451out_ctx:
1452 drm_modeset_drop_locks(&ctx);
1453 drm_modeset_acquire_fini(&ctx);
1454
1455 return ret;
1456
1457backoff:
1458 drm_atomic_state_clear(state);
1459 drm_modeset_backoff(&ctx);
1460 goto retry;
1461}
1462
1463/**
1464 * drm_fb_helper_setcmap - implementation for &fb_ops.fb_setcmap
1465 * @cmap: cmap to set
1466 * @info: fbdev registered by the helper
1467 */
1468int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
1469{
1470 struct drm_fb_helper *fb_helper = info->par;
1471 int ret;
1472
1473 if (oops_in_progress)
1474 return -EBUSY;
1475
1476 mutex_lock(&fb_helper->lock);
1477
1478 if (!drm_fb_helper_is_bound(fb_helper)) {
1479 ret = -EBUSY;
1480 goto out;
1481 }
1482
1483 if (info->fix.visual == FB_VISUAL_TRUECOLOR)
1484 ret = setcmap_pseudo_palette(cmap, info);
1485 else if (drm_drv_uses_atomic_modeset(fb_helper->dev))
1486 ret = setcmap_atomic(cmap, info);
1487 else
1488 ret = setcmap_legacy(cmap, info);
1489
1490out:
1491 mutex_unlock(&fb_helper->lock);
1492
1493 return ret;
1494}
1495EXPORT_SYMBOL(drm_fb_helper_setcmap);
1496
1497/**
1498 * drm_fb_helper_ioctl - legacy ioctl implementation
1499 * @info: fbdev registered by the helper
1500 * @cmd: ioctl command
1501 * @arg: ioctl argument
1502 *
1503 * A helper to implement the standard fbdev ioctl. Only
1504 * FBIO_WAITFORVSYNC is implemented for now.
1505 */
1506int drm_fb_helper_ioctl(struct fb_info *info, unsigned int cmd,
1507 unsigned long arg)
1508{
1509 struct drm_fb_helper *fb_helper = info->par;
1510 struct drm_mode_set *mode_set;
1511 struct drm_crtc *crtc;
1512 int ret = 0;
1513
1514 mutex_lock(&fb_helper->lock);
1515 if (!drm_fb_helper_is_bound(fb_helper)) {
1516 ret = -EBUSY;
1517 goto unlock;
1518 }
1519
1520 switch (cmd) {
1521 case FBIO_WAITFORVSYNC:
1522 /*
1523 * Only consider the first CRTC.
1524 *
1525 * This ioctl is supposed to take the CRTC number as
1526 * an argument, but in fbdev times, what that number
1527 * was supposed to be was quite unclear, different
1528 * drivers were passing that argument differently
1529 * (some by reference, some by value), and most of the
1530 * userspace applications were just hardcoding 0 as an
1531 * argument.
1532 *
1533 * The first CRTC should be the integrated panel on
1534 * most drivers, so this is the best choice we can
1535 * make. If we're not smart enough here, one should
1536 * just consider switch the userspace to KMS.
1537 */
1538 mode_set = &fb_helper->crtc_info[0].mode_set;
1539 crtc = mode_set->crtc;
1540
1541 /*
1542 * Only wait for a vblank event if the CRTC is
1543 * enabled, otherwise just don't do anythintg,
1544 * not even report an error.
1545 */
1546 ret = drm_crtc_vblank_get(crtc);
1547 if (!ret) {
1548 drm_crtc_wait_one_vblank(crtc);
1549 drm_crtc_vblank_put(crtc);
1550 }
1551
1552 ret = 0;
1553 goto unlock;
1554 default:
1555 ret = -ENOTTY;
1556 }
1557
1558unlock:
1559 mutex_unlock(&fb_helper->lock);
1560 return ret;
1561}
1562EXPORT_SYMBOL(drm_fb_helper_ioctl);
1563
1564/**
1565 * drm_fb_helper_check_var - implementation for &fb_ops.fb_check_var
1566 * @var: screeninfo to check
1567 * @info: fbdev registered by the helper
1568 */
1569int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
1570 struct fb_info *info)
1571{
1572 struct drm_fb_helper *fb_helper = info->par;
1573 struct drm_framebuffer *fb = fb_helper->fb;
1574 int depth;
1575
1576 if (var->pixclock != 0 || in_dbg_master())
1577 return -EINVAL;
1578
1579 /*
1580 * Changes struct fb_var_screeninfo are currently not pushed back
1581 * to KMS, hence fail if different settings are requested.
1582 */
1583 if (var->bits_per_pixel != fb->format->cpp[0] * 8 ||
1584 var->xres > fb->width || var->yres > fb->height ||
1585 var->xres_virtual > fb->width || var->yres_virtual > fb->height) {
1586 DRM_DEBUG("fb requested width/height/bpp can't fit in current fb "
1587 "request %dx%d-%d (virtual %dx%d) > %dx%d-%d\n",
1588 var->xres, var->yres, var->bits_per_pixel,
1589 var->xres_virtual, var->yres_virtual,
1590 fb->width, fb->height, fb->format->cpp[0] * 8);
1591 return -EINVAL;
1592 }
1593
1594 switch (var->bits_per_pixel) {
1595 case 16:
1596 depth = (var->green.length == 6) ? 16 : 15;
1597 break;
1598 case 32:
1599 depth = (var->transp.length > 0) ? 32 : 24;
1600 break;
1601 default:
1602 depth = var->bits_per_pixel;
1603 break;
1604 }
1605
1606 switch (depth) {
1607 case 8:
1608 var->red.offset = 0;
1609 var->green.offset = 0;
1610 var->blue.offset = 0;
1611 var->red.length = 8;
1612 var->green.length = 8;
1613 var->blue.length = 8;
1614 var->transp.length = 0;
1615 var->transp.offset = 0;
1616 break;
1617 case 15:
1618 var->red.offset = 10;
1619 var->green.offset = 5;
1620 var->blue.offset = 0;
1621 var->red.length = 5;
1622 var->green.length = 5;
1623 var->blue.length = 5;
1624 var->transp.length = 1;
1625 var->transp.offset = 15;
1626 break;
1627 case 16:
1628 var->red.offset = 11;
1629 var->green.offset = 5;
1630 var->blue.offset = 0;
1631 var->red.length = 5;
1632 var->green.length = 6;
1633 var->blue.length = 5;
1634 var->transp.length = 0;
1635 var->transp.offset = 0;
1636 break;
1637 case 24:
1638 var->red.offset = 16;
1639 var->green.offset = 8;
1640 var->blue.offset = 0;
1641 var->red.length = 8;
1642 var->green.length = 8;
1643 var->blue.length = 8;
1644 var->transp.length = 0;
1645 var->transp.offset = 0;
1646 break;
1647 case 32:
1648 var->red.offset = 16;
1649 var->green.offset = 8;
1650 var->blue.offset = 0;
1651 var->red.length = 8;
1652 var->green.length = 8;
1653 var->blue.length = 8;
1654 var->transp.length = 8;
1655 var->transp.offset = 24;
1656 break;
1657 default:
1658 return -EINVAL;
1659 }
1660 return 0;
1661}
1662EXPORT_SYMBOL(drm_fb_helper_check_var);
1663
1664/**
1665 * drm_fb_helper_set_par - implementation for &fb_ops.fb_set_par
1666 * @info: fbdev registered by the helper
1667 *
1668 * This will let fbcon do the mode init and is called at initialization time by
1669 * the fbdev core when registering the driver, and later on through the hotplug
1670 * callback.
1671 */
1672int drm_fb_helper_set_par(struct fb_info *info)
1673{
1674 struct drm_fb_helper *fb_helper = info->par;
1675 struct fb_var_screeninfo *var = &info->var;
1676
1677 if (oops_in_progress)
1678 return -EBUSY;
1679
1680 if (var->pixclock != 0) {
1681 DRM_ERROR("PIXEL CLOCK SET\n");
1682 return -EINVAL;
1683 }
1684
1685 drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper);
1686
1687 return 0;
1688}
1689EXPORT_SYMBOL(drm_fb_helper_set_par);
1690
1691static void pan_set(struct drm_fb_helper *fb_helper, int x, int y)
1692{
1693 int i;
1694
1695 for (i = 0; i < fb_helper->crtc_count; i++) {
1696 struct drm_mode_set *mode_set;
1697
1698 mode_set = &fb_helper->crtc_info[i].mode_set;
1699
1700 mode_set->x = x;
1701 mode_set->y = y;
1702 }
1703}
1704
1705static int pan_display_atomic(struct fb_var_screeninfo *var,
1706 struct fb_info *info)
1707{
1708 struct drm_fb_helper *fb_helper = info->par;
1709 int ret;
1710
1711 pan_set(fb_helper, var->xoffset, var->yoffset);
1712
1713 ret = restore_fbdev_mode_atomic(fb_helper, true);
1714 if (!ret) {
1715 info->var.xoffset = var->xoffset;
1716 info->var.yoffset = var->yoffset;
1717 } else
1718 pan_set(fb_helper, info->var.xoffset, info->var.yoffset);
1719
1720 return ret;
1721}
1722
1723static int pan_display_legacy(struct fb_var_screeninfo *var,
1724 struct fb_info *info)
1725{
1726 struct drm_fb_helper *fb_helper = info->par;
1727 struct drm_mode_set *modeset;
1728 int ret = 0;
1729 int i;
1730
1731 drm_modeset_lock_all(fb_helper->dev);
1732 for (i = 0; i < fb_helper->crtc_count; i++) {
1733 modeset = &fb_helper->crtc_info[i].mode_set;
1734
1735 modeset->x = var->xoffset;
1736 modeset->y = var->yoffset;
1737
1738 if (modeset->num_connectors) {
1739 ret = drm_mode_set_config_internal(modeset);
1740 if (!ret) {
1741 info->var.xoffset = var->xoffset;
1742 info->var.yoffset = var->yoffset;
1743 }
1744 }
1745 }
1746 drm_modeset_unlock_all(fb_helper->dev);
1747
1748 return ret;
1749}
1750
1751/**
1752 * drm_fb_helper_pan_display - implementation for &fb_ops.fb_pan_display
1753 * @var: updated screen information
1754 * @info: fbdev registered by the helper
1755 */
1756int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
1757 struct fb_info *info)
1758{
1759 struct drm_fb_helper *fb_helper = info->par;
1760 struct drm_device *dev = fb_helper->dev;
1761 int ret;
1762
1763 if (oops_in_progress)
1764 return -EBUSY;
1765
1766 mutex_lock(&fb_helper->lock);
1767 if (!drm_fb_helper_is_bound(fb_helper)) {
1768 mutex_unlock(&fb_helper->lock);
1769 return -EBUSY;
1770 }
1771
1772 if (drm_drv_uses_atomic_modeset(dev))
1773 ret = pan_display_atomic(var, info);
1774 else
1775 ret = pan_display_legacy(var, info);
1776 mutex_unlock(&fb_helper->lock);
1777
1778 return ret;
1779}
1780EXPORT_SYMBOL(drm_fb_helper_pan_display);
1781
1782/*
1783 * Allocates the backing storage and sets up the fbdev info structure through
1784 * the ->fb_probe callback.
1785 */
1786static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
1787 int preferred_bpp)
1788{
1789 int ret = 0;
1790 int crtc_count = 0;
1791 int i;
1792 struct drm_fb_helper_surface_size sizes;
1793 int gamma_size = 0;
1794
1795 memset(&sizes, 0, sizeof(struct drm_fb_helper_surface_size));
1796 sizes.surface_depth = 24;
1797 sizes.surface_bpp = 32;
1798 sizes.fb_width = (u32)-1;
1799 sizes.fb_height = (u32)-1;
1800
1801 /* if driver picks 8 or 16 by default use that for both depth/bpp */
1802 if (preferred_bpp != sizes.surface_bpp)
1803 sizes.surface_depth = sizes.surface_bpp = preferred_bpp;
1804
1805 /* first up get a count of crtcs now in use and new min/maxes width/heights */
1806 drm_fb_helper_for_each_connector(fb_helper, i) {
1807 struct drm_fb_helper_connector *fb_helper_conn = fb_helper->connector_info[i];
1808 struct drm_cmdline_mode *cmdline_mode;
1809
1810 cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
1811
1812 if (cmdline_mode->bpp_specified) {
1813 switch (cmdline_mode->bpp) {
1814 case 8:
1815 sizes.surface_depth = sizes.surface_bpp = 8;
1816 break;
1817 case 15:
1818 sizes.surface_depth = 15;
1819 sizes.surface_bpp = 16;
1820 break;
1821 case 16:
1822 sizes.surface_depth = sizes.surface_bpp = 16;
1823 break;
1824 case 24:
1825 sizes.surface_depth = sizes.surface_bpp = 24;
1826 break;
1827 case 32:
1828 sizes.surface_depth = 24;
1829 sizes.surface_bpp = 32;
1830 break;
1831 }
1832 break;
1833 }
1834 }
1835
1836 crtc_count = 0;
1837 for (i = 0; i < fb_helper->crtc_count; i++) {
1838 struct drm_display_mode *desired_mode;
1839 struct drm_mode_set *mode_set;
1840 int x, y, j;
1841 /* in case of tile group, are we the last tile vert or horiz?
1842 * If no tile group you are always the last one both vertically
1843 * and horizontally
1844 */
1845 bool lastv = true, lasth = true;
1846
1847 desired_mode = fb_helper->crtc_info[i].desired_mode;
1848 mode_set = &fb_helper->crtc_info[i].mode_set;
1849
1850 if (!desired_mode)
1851 continue;
1852
1853 crtc_count++;
1854
1855 x = fb_helper->crtc_info[i].x;
1856 y = fb_helper->crtc_info[i].y;
1857
1858 if (gamma_size == 0)
1859 gamma_size = fb_helper->crtc_info[i].mode_set.crtc->gamma_size;
1860
1861 sizes.surface_width = max_t(u32, desired_mode->hdisplay + x, sizes.surface_width);
1862 sizes.surface_height = max_t(u32, desired_mode->vdisplay + y, sizes.surface_height);
1863
1864 for (j = 0; j < mode_set->num_connectors; j++) {
1865 struct drm_connector *connector = mode_set->connectors[j];
1866
1867 if (connector->has_tile) {
1868 lasth = (connector->tile_h_loc == (connector->num_h_tile - 1));
1869 lastv = (connector->tile_v_loc == (connector->num_v_tile - 1));
1870 /* cloning to multiple tiles is just crazy-talk, so: */
1871 break;
1872 }
1873 }
1874
1875 if (lasth)
1876 sizes.fb_width = min_t(u32, desired_mode->hdisplay + x, sizes.fb_width);
1877 if (lastv)
1878 sizes.fb_height = min_t(u32, desired_mode->vdisplay + y, sizes.fb_height);
1879 }
1880
1881 if (crtc_count == 0 || sizes.fb_width == -1 || sizes.fb_height == -1) {
1882 DRM_INFO("Cannot find any crtc or sizes\n");
1883
1884 /* First time: disable all crtc's.. */
1885 if (!fb_helper->deferred_setup && !READ_ONCE(fb_helper->dev->master))
1886 restore_fbdev_mode(fb_helper);
1887 return -EAGAIN;
1888 }
1889
1890 /* Handle our overallocation */
1891 sizes.surface_height *= drm_fbdev_overalloc;
1892 sizes.surface_height /= 100;
1893
1894 /* push down into drivers */
1895 ret = (*fb_helper->funcs->fb_probe)(fb_helper, &sizes);
1896 if (ret < 0)
1897 return ret;
1898
1899 strcpy(fb_helper->fb->comm, "[fbcon]");
1900 return 0;
1901}
1902
1903/**
1904 * drm_fb_helper_fill_fix - initializes fixed fbdev information
1905 * @info: fbdev registered by the helper
1906 * @pitch: desired pitch
1907 * @depth: desired depth
1908 *
1909 * Helper to fill in the fixed fbdev information useful for a non-accelerated
1910 * fbdev emulations. Drivers which support acceleration methods which impose
1911 * additional constraints need to set up their own limits.
1912 *
1913 * Drivers should call this (or their equivalent setup code) from their
1914 * &drm_fb_helper_funcs.fb_probe callback.
1915 */
1916void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
1917 uint32_t depth)
1918{
1919 info->fix.type = FB_TYPE_PACKED_PIXELS;
1920 info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR :
1921 FB_VISUAL_TRUECOLOR;
1922 info->fix.mmio_start = 0;
1923 info->fix.mmio_len = 0;
1924 info->fix.type_aux = 0;
1925 info->fix.xpanstep = 1; /* doing it in hw */
1926 info->fix.ypanstep = 1; /* doing it in hw */
1927 info->fix.ywrapstep = 0;
1928 info->fix.accel = FB_ACCEL_NONE;
1929
1930 info->fix.line_length = pitch;
1931}
1932EXPORT_SYMBOL(drm_fb_helper_fill_fix);
1933
1934/**
1935 * drm_fb_helper_fill_var - initalizes variable fbdev information
1936 * @info: fbdev instance to set up
1937 * @fb_helper: fb helper instance to use as template
1938 * @fb_width: desired fb width
1939 * @fb_height: desired fb height
1940 *
1941 * Sets up the variable fbdev metainformation from the given fb helper instance
1942 * and the drm framebuffer allocated in &drm_fb_helper.fb.
1943 *
1944 * Drivers should call this (or their equivalent setup code) from their
1945 * &drm_fb_helper_funcs.fb_probe callback after having allocated the fbdev
1946 * backing storage framebuffer.
1947 */
1948void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper,
1949 uint32_t fb_width, uint32_t fb_height)
1950{
1951 struct drm_framebuffer *fb = fb_helper->fb;
1952
1953 info->pseudo_palette = fb_helper->pseudo_palette;
1954 info->var.xres_virtual = fb->width;
1955 info->var.yres_virtual = fb->height;
1956 info->var.bits_per_pixel = fb->format->cpp[0] * 8;
1957 info->var.accel_flags = FB_ACCELF_TEXT;
1958 info->var.xoffset = 0;
1959 info->var.yoffset = 0;
1960 info->var.activate = FB_ACTIVATE_NOW;
1961
1962 switch (fb->format->depth) {
1963 case 8:
1964 info->var.red.offset = 0;
1965 info->var.green.offset = 0;
1966 info->var.blue.offset = 0;
1967 info->var.red.length = 8; /* 8bit DAC */
1968 info->var.green.length = 8;
1969 info->var.blue.length = 8;
1970 info->var.transp.offset = 0;
1971 info->var.transp.length = 0;
1972 break;
1973 case 15:
1974 info->var.red.offset = 10;
1975 info->var.green.offset = 5;
1976 info->var.blue.offset = 0;
1977 info->var.red.length = 5;
1978 info->var.green.length = 5;
1979 info->var.blue.length = 5;
1980 info->var.transp.offset = 15;
1981 info->var.transp.length = 1;
1982 break;
1983 case 16:
1984 info->var.red.offset = 11;
1985 info->var.green.offset = 5;
1986 info->var.blue.offset = 0;
1987 info->var.red.length = 5;
1988 info->var.green.length = 6;
1989 info->var.blue.length = 5;
1990 info->var.transp.offset = 0;
1991 break;
1992 case 24:
1993 info->var.red.offset = 16;
1994 info->var.green.offset = 8;
1995 info->var.blue.offset = 0;
1996 info->var.red.length = 8;
1997 info->var.green.length = 8;
1998 info->var.blue.length = 8;
1999 info->var.transp.offset = 0;
2000 info->var.transp.length = 0;
2001 break;
2002 case 32:
2003 info->var.red.offset = 16;
2004 info->var.green.offset = 8;
2005 info->var.blue.offset = 0;
2006 info->var.red.length = 8;
2007 info->var.green.length = 8;
2008 info->var.blue.length = 8;
2009 info->var.transp.offset = 24;
2010 info->var.transp.length = 8;
2011 break;
2012 default:
2013 break;
2014 }
2015
2016 info->var.xres = fb_width;
2017 info->var.yres = fb_height;
2018}
2019EXPORT_SYMBOL(drm_fb_helper_fill_var);
2020
2021static int drm_fb_helper_probe_connector_modes(struct drm_fb_helper *fb_helper,
2022 uint32_t maxX,
2023 uint32_t maxY)
2024{
2025 struct drm_connector *connector;
2026 int i, count = 0;
2027
2028 drm_fb_helper_for_each_connector(fb_helper, i) {
2029 connector = fb_helper->connector_info[i]->connector;
2030 count += connector->funcs->fill_modes(connector, maxX, maxY);
2031 }
2032
2033 return count;
2034}
2035
2036struct drm_display_mode *drm_has_preferred_mode(struct drm_fb_helper_connector *fb_connector, int width, int height)
2037{
2038 struct drm_display_mode *mode;
2039
2040 list_for_each_entry(mode, &fb_connector->connector->modes, head) {
2041 if (mode->hdisplay > width ||
2042 mode->vdisplay > height)
2043 continue;
2044 if (mode->type & DRM_MODE_TYPE_PREFERRED)
2045 return mode;
2046 }
2047 return NULL;
2048}
2049EXPORT_SYMBOL(drm_has_preferred_mode);
2050
2051static bool drm_has_cmdline_mode(struct drm_fb_helper_connector *fb_connector)
2052{
2053 return fb_connector->connector->cmdline_mode.specified;
2054}
2055
2056struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_connector *fb_helper_conn)
2057{
2058 struct drm_cmdline_mode *cmdline_mode;
2059 struct drm_display_mode *mode;
2060 bool prefer_non_interlace;
2061
2062 cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
2063 if (cmdline_mode->specified == false)
2064 return NULL;
2065
2066 /* attempt to find a matching mode in the list of modes
2067 * we have gotten so far, if not add a CVT mode that conforms
2068 */
2069 if (cmdline_mode->rb || cmdline_mode->margins)
2070 goto create_mode;
2071
2072 prefer_non_interlace = !cmdline_mode->interlace;
2073again:
2074 list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
2075 /* check width/height */
2076 if (mode->hdisplay != cmdline_mode->xres ||
2077 mode->vdisplay != cmdline_mode->yres)
2078 continue;
2079
2080 if (cmdline_mode->refresh_specified) {
2081 if (mode->vrefresh != cmdline_mode->refresh)
2082 continue;
2083 }
2084
2085 if (cmdline_mode->interlace) {
2086 if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
2087 continue;
2088 } else if (prefer_non_interlace) {
2089 if (mode->flags & DRM_MODE_FLAG_INTERLACE)
2090 continue;
2091 }
2092 return mode;
2093 }
2094
2095 if (prefer_non_interlace) {
2096 prefer_non_interlace = false;
2097 goto again;
2098 }
2099
2100create_mode:
2101 mode = drm_mode_create_from_cmdline_mode(fb_helper_conn->connector->dev,
2102 cmdline_mode);
2103 list_add(&mode->head, &fb_helper_conn->connector->modes);
2104 return mode;
2105}
2106EXPORT_SYMBOL(drm_pick_cmdline_mode);
2107
2108static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
2109{
2110 bool enable;
2111
2112 if (connector->display_info.non_desktop)
2113 return false;
2114
2115 if (strict)
2116 enable = connector->status == connector_status_connected;
2117 else
2118 enable = connector->status != connector_status_disconnected;
2119
2120 return enable;
2121}
2122
2123static void drm_enable_connectors(struct drm_fb_helper *fb_helper,
2124 bool *enabled)
2125{
2126 bool any_enabled = false;
2127 struct drm_connector *connector;
2128 int i = 0;
2129
2130 drm_fb_helper_for_each_connector(fb_helper, i) {
2131 connector = fb_helper->connector_info[i]->connector;
2132 enabled[i] = drm_connector_enabled(connector, true);
2133 DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
2134 connector->display_info.non_desktop ? "non desktop" : enabled[i] ? "yes" : "no");
2135
2136 any_enabled |= enabled[i];
2137 }
2138
2139 if (any_enabled)
2140 return;
2141
2142 drm_fb_helper_for_each_connector(fb_helper, i) {
2143 connector = fb_helper->connector_info[i]->connector;
2144 enabled[i] = drm_connector_enabled(connector, false);
2145 }
2146}
2147
2148static bool drm_target_cloned(struct drm_fb_helper *fb_helper,
2149 struct drm_display_mode **modes,
2150 struct drm_fb_offset *offsets,
2151 bool *enabled, int width, int height)
2152{
2153 int count, i, j;
2154 bool can_clone = false;
2155 struct drm_fb_helper_connector *fb_helper_conn;
2156 struct drm_display_mode *dmt_mode, *mode;
2157
2158 /* only contemplate cloning in the single crtc case */
2159 if (fb_helper->crtc_count > 1)
2160 return false;
2161
2162 count = 0;
2163 drm_fb_helper_for_each_connector(fb_helper, i) {
2164 if (enabled[i])
2165 count++;
2166 }
2167
2168 /* only contemplate cloning if more than one connector is enabled */
2169 if (count <= 1)
2170 return false;
2171
2172 /* check the command line or if nothing common pick 1024x768 */
2173 can_clone = true;
2174 drm_fb_helper_for_each_connector(fb_helper, i) {
2175 if (!enabled[i])
2176 continue;
2177 fb_helper_conn = fb_helper->connector_info[i];
2178 modes[i] = drm_pick_cmdline_mode(fb_helper_conn);
2179 if (!modes[i]) {
2180 can_clone = false;
2181 break;
2182 }
2183 for (j = 0; j < i; j++) {
2184 if (!enabled[j])
2185 continue;
2186 if (!drm_mode_equal(modes[j], modes[i]))
2187 can_clone = false;
2188 }
2189 }
2190
2191 if (can_clone) {
2192 DRM_DEBUG_KMS("can clone using command line\n");
2193 return true;
2194 }
2195
2196 /* try and find a 1024x768 mode on each connector */
2197 can_clone = true;
2198 dmt_mode = drm_mode_find_dmt(fb_helper->dev, 1024, 768, 60, false);
2199
2200 drm_fb_helper_for_each_connector(fb_helper, i) {
2201 if (!enabled[i])
2202 continue;
2203
2204 fb_helper_conn = fb_helper->connector_info[i];
2205 list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
2206 if (drm_mode_equal(mode, dmt_mode))
2207 modes[i] = mode;
2208 }
2209 if (!modes[i])
2210 can_clone = false;
2211 }
2212
2213 if (can_clone) {
2214 DRM_DEBUG_KMS("can clone using 1024x768\n");
2215 return true;
2216 }
2217 DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
2218 return false;
2219}
2220
2221static int drm_get_tile_offsets(struct drm_fb_helper *fb_helper,
2222 struct drm_display_mode **modes,
2223 struct drm_fb_offset *offsets,
2224 int idx,
2225 int h_idx, int v_idx)
2226{
2227 struct drm_fb_helper_connector *fb_helper_conn;
2228 int i;
2229 int hoffset = 0, voffset = 0;
2230
2231 drm_fb_helper_for_each_connector(fb_helper, i) {
2232 fb_helper_conn = fb_helper->connector_info[i];
2233 if (!fb_helper_conn->connector->has_tile)
2234 continue;
2235
2236 if (!modes[i] && (h_idx || v_idx)) {
2237 DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i,
2238 fb_helper_conn->connector->base.id);
2239 continue;
2240 }
2241 if (fb_helper_conn->connector->tile_h_loc < h_idx)
2242 hoffset += modes[i]->hdisplay;
2243
2244 if (fb_helper_conn->connector->tile_v_loc < v_idx)
2245 voffset += modes[i]->vdisplay;
2246 }
2247 offsets[idx].x = hoffset;
2248 offsets[idx].y = voffset;
2249 DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
2250 return 0;
2251}
2252
2253static bool drm_target_preferred(struct drm_fb_helper *fb_helper,
2254 struct drm_display_mode **modes,
2255 struct drm_fb_offset *offsets,
2256 bool *enabled, int width, int height)
2257{
2258 struct drm_fb_helper_connector *fb_helper_conn;
2259 const u64 mask = BIT_ULL(fb_helper->connector_count) - 1;
2260 u64 conn_configured = 0;
2261 int tile_pass = 0;
2262 int i;
2263
2264retry:
2265 drm_fb_helper_for_each_connector(fb_helper, i) {
2266 fb_helper_conn = fb_helper->connector_info[i];
2267
2268 if (conn_configured & BIT_ULL(i))
2269 continue;
2270
2271 if (enabled[i] == false) {
2272 conn_configured |= BIT_ULL(i);
2273 continue;
2274 }
2275
2276 /* first pass over all the untiled connectors */
2277 if (tile_pass == 0 && fb_helper_conn->connector->has_tile)
2278 continue;
2279
2280 if (tile_pass == 1) {
2281 if (fb_helper_conn->connector->tile_h_loc != 0 ||
2282 fb_helper_conn->connector->tile_v_loc != 0)
2283 continue;
2284
2285 } else {
2286 if (fb_helper_conn->connector->tile_h_loc != tile_pass - 1 &&
2287 fb_helper_conn->connector->tile_v_loc != tile_pass - 1)
2288 /* if this tile_pass doesn't cover any of the tiles - keep going */
2289 continue;
2290
2291 /*
2292 * find the tile offsets for this pass - need to find
2293 * all tiles left and above
2294 */
2295 drm_get_tile_offsets(fb_helper, modes, offsets,
2296 i, fb_helper_conn->connector->tile_h_loc, fb_helper_conn->connector->tile_v_loc);
2297 }
2298 DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
2299 fb_helper_conn->connector->base.id);
2300
2301 /* got for command line mode first */
2302 modes[i] = drm_pick_cmdline_mode(fb_helper_conn);
2303 if (!modes[i]) {
2304 DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n",
2305 fb_helper_conn->connector->base.id, fb_helper_conn->connector->tile_group ? fb_helper_conn->connector->tile_group->id : 0);
2306 modes[i] = drm_has_preferred_mode(fb_helper_conn, width, height);
2307 }
2308 /* No preferred modes, pick one off the list */
2309 if (!modes[i] && !list_empty(&fb_helper_conn->connector->modes)) {
2310 list_for_each_entry(modes[i], &fb_helper_conn->connector->modes, head)
2311 break;
2312 }
2313 DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
2314 "none");
2315 conn_configured |= BIT_ULL(i);
2316 }
2317
2318 if ((conn_configured & mask) != mask) {
2319 tile_pass++;
2320 goto retry;
2321 }
2322 return true;
2323}
2324
2325static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
2326 struct drm_fb_helper_crtc **best_crtcs,
2327 struct drm_display_mode **modes,
2328 int n, int width, int height)
2329{
2330 int c, o;
2331 struct drm_connector *connector;
2332 const struct drm_connector_helper_funcs *connector_funcs;
2333 struct drm_encoder *encoder;
2334 int my_score, best_score, score;
2335 struct drm_fb_helper_crtc **crtcs, *crtc;
2336 struct drm_fb_helper_connector *fb_helper_conn;
2337
2338 if (n == fb_helper->connector_count)
2339 return 0;
2340
2341 fb_helper_conn = fb_helper->connector_info[n];
2342 connector = fb_helper_conn->connector;
2343
2344 best_crtcs[n] = NULL;
2345 best_score = drm_pick_crtcs(fb_helper, best_crtcs, modes, n+1, width, height);
2346 if (modes[n] == NULL)
2347 return best_score;
2348
2349 crtcs = kcalloc(fb_helper->connector_count,
2350 sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
2351 if (!crtcs)
2352 return best_score;
2353
2354 my_score = 1;
2355 if (connector->status == connector_status_connected)
2356 my_score++;
2357 if (drm_has_cmdline_mode(fb_helper_conn))
2358 my_score++;
2359 if (drm_has_preferred_mode(fb_helper_conn, width, height))
2360 my_score++;
2361
2362 connector_funcs = connector->helper_private;
2363
2364 /*
2365 * If the DRM device implements atomic hooks and ->best_encoder() is
2366 * NULL we fallback to the default drm_atomic_helper_best_encoder()
2367 * helper.
2368 */
2369 if (drm_drv_uses_atomic_modeset(fb_helper->dev) &&
2370 !connector_funcs->best_encoder)
2371 encoder = drm_atomic_helper_best_encoder(connector);
2372 else
2373 encoder = connector_funcs->best_encoder(connector);
2374
2375 if (!encoder)
2376 goto out;
2377
2378 /*
2379 * select a crtc for this connector and then attempt to configure
2380 * remaining connectors
2381 */
2382 for (c = 0; c < fb_helper->crtc_count; c++) {
2383 crtc = &fb_helper->crtc_info[c];
2384
2385 if ((encoder->possible_crtcs & (1 << c)) == 0)
2386 continue;
2387
2388 for (o = 0; o < n; o++)
2389 if (best_crtcs[o] == crtc)
2390 break;
2391
2392 if (o < n) {
2393 /* ignore cloning unless only a single crtc */
2394 if (fb_helper->crtc_count > 1)
2395 continue;
2396
2397 if (!drm_mode_equal(modes[o], modes[n]))
2398 continue;
2399 }
2400
2401 crtcs[n] = crtc;
2402 memcpy(crtcs, best_crtcs, n * sizeof(struct drm_fb_helper_crtc *));
2403 score = my_score + drm_pick_crtcs(fb_helper, crtcs, modes, n + 1,
2404 width, height);
2405 if (score > best_score) {
2406 best_score = score;
2407 memcpy(best_crtcs, crtcs,
2408 fb_helper->connector_count *
2409 sizeof(struct drm_fb_helper_crtc *));
2410 }
2411 }
2412out:
2413 kfree(crtcs);
2414 return best_score;
2415}
2416
2417/*
2418 * This function checks if rotation is necessary because of panel orientation
2419 * and if it is, if it is supported.
2420 * If rotation is necessary and supported, its gets set in fb_crtc.rotation.
2421 * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
2422 * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
2423 * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
2424 * the unsupported rotation.
2425 */
2426static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
2427 struct drm_fb_helper_crtc *fb_crtc,
2428 struct drm_connector *connector)
2429{
2430 struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
2431 uint64_t valid_mask = 0;
2432 int i, rotation;
2433
2434 fb_crtc->rotation = DRM_MODE_ROTATE_0;
2435
2436 switch (connector->display_info.panel_orientation) {
2437 case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
2438 rotation = DRM_MODE_ROTATE_180;
2439 break;
2440 case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
2441 rotation = DRM_MODE_ROTATE_90;
2442 break;
2443 case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
2444 rotation = DRM_MODE_ROTATE_270;
2445 break;
2446 default:
2447 rotation = DRM_MODE_ROTATE_0;
2448 }
2449
2450 /*
2451 * TODO: support 90 / 270 degree hardware rotation,
2452 * depending on the hardware this may require the framebuffer
2453 * to be in a specific tiling format.
2454 */
2455 if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) {
2456 fb_helper->sw_rotations |= rotation;
2457 return;
2458 }
2459
2460 for (i = 0; i < plane->rotation_property->num_values; i++)
2461 valid_mask |= (1ULL << plane->rotation_property->values[i]);
2462
2463 if (!(rotation & valid_mask)) {
2464 fb_helper->sw_rotations |= rotation;
2465 return;
2466 }
2467
2468 fb_crtc->rotation = rotation;
2469 /* Rotating in hardware, fbcon should not rotate */
2470 fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
2471}
2472
2473static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
2474 u32 width, u32 height)
2475{
2476 struct drm_device *dev = fb_helper->dev;
2477 struct drm_fb_helper_crtc **crtcs;
2478 struct drm_display_mode **modes;
2479 struct drm_fb_offset *offsets;
2480 bool *enabled;
2481 int i;
2482
2483 DRM_DEBUG_KMS("\n");
2484 /* prevent concurrent modification of connector_count by hotplug */
2485 lockdep_assert_held(&fb_helper->lock);
2486
2487 crtcs = kcalloc(fb_helper->connector_count,
2488 sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
2489 modes = kcalloc(fb_helper->connector_count,
2490 sizeof(struct drm_display_mode *), GFP_KERNEL);
2491 offsets = kcalloc(fb_helper->connector_count,
2492 sizeof(struct drm_fb_offset), GFP_KERNEL);
2493 enabled = kcalloc(fb_helper->connector_count,
2494 sizeof(bool), GFP_KERNEL);
2495 if (!crtcs || !modes || !enabled || !offsets) {
2496 DRM_ERROR("Memory allocation failed\n");
2497 goto out;
2498 }
2499
2500 mutex_lock(&fb_helper->dev->mode_config.mutex);
2501 if (drm_fb_helper_probe_connector_modes(fb_helper, width, height) == 0)
2502 DRM_DEBUG_KMS("No connectors reported connected with modes\n");
2503 drm_enable_connectors(fb_helper, enabled);
2504
2505 if (!(fb_helper->funcs->initial_config &&
2506 fb_helper->funcs->initial_config(fb_helper, crtcs, modes,
2507 offsets,
2508 enabled, width, height))) {
2509 memset(modes, 0, fb_helper->connector_count*sizeof(modes[0]));
2510 memset(crtcs, 0, fb_helper->connector_count*sizeof(crtcs[0]));
2511 memset(offsets, 0, fb_helper->connector_count*sizeof(offsets[0]));
2512
2513 if (!drm_target_cloned(fb_helper, modes, offsets,
2514 enabled, width, height) &&
2515 !drm_target_preferred(fb_helper, modes, offsets,
2516 enabled, width, height))
2517 DRM_ERROR("Unable to find initial modes\n");
2518
2519 DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
2520 width, height);
2521
2522 drm_pick_crtcs(fb_helper, crtcs, modes, 0, width, height);
2523 }
2524 mutex_unlock(&fb_helper->dev->mode_config.mutex);
2525
2526 /* need to set the modesets up here for use later */
2527 /* fill out the connector<->crtc mappings into the modesets */
2528 for (i = 0; i < fb_helper->crtc_count; i++)
2529 drm_fb_helper_modeset_release(fb_helper,
2530 &fb_helper->crtc_info[i].mode_set);
2531
2532 fb_helper->sw_rotations = 0;
2533 drm_fb_helper_for_each_connector(fb_helper, i) {
2534 struct drm_display_mode *mode = modes[i];
2535 struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
2536 struct drm_fb_offset *offset = &offsets[i];
2537
2538 if (mode && fb_crtc) {
2539 struct drm_mode_set *modeset = &fb_crtc->mode_set;
2540 struct drm_connector *connector =
2541 fb_helper->connector_info[i]->connector;
2542
2543 DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
2544 mode->name, fb_crtc->mode_set.crtc->base.id, offset->x, offset->y);
2545
2546 fb_crtc->desired_mode = mode;
2547 fb_crtc->x = offset->x;
2548 fb_crtc->y = offset->y;
2549 modeset->mode = drm_mode_duplicate(dev,
2550 fb_crtc->desired_mode);
2551 drm_connector_get(connector);
2552 drm_setup_crtc_rotation(fb_helper, fb_crtc, connector);
2553 modeset->connectors[modeset->num_connectors++] = connector;
2554 modeset->x = offset->x;
2555 modeset->y = offset->y;
2556 }
2557 }
2558out:
2559 kfree(crtcs);
2560 kfree(modes);
2561 kfree(offsets);
2562 kfree(enabled);
2563}
2564
2565/*
2566 * This is a continuation of drm_setup_crtcs() that sets up anything related
2567 * to the framebuffer. During initialization, drm_setup_crtcs() is called before
2568 * the framebuffer has been allocated (fb_helper->fb and fb_helper->fbdev).
2569 * So, any setup that touches those fields needs to be done here instead of in
2570 * drm_setup_crtcs().
2571 */
2572static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper)
2573{
2574 struct fb_info *info = fb_helper->fbdev;
2575 int i;
2576
2577 for (i = 0; i < fb_helper->crtc_count; i++)
2578 if (fb_helper->crtc_info[i].mode_set.num_connectors)
2579 fb_helper->crtc_info[i].mode_set.fb = fb_helper->fb;
2580
2581 mutex_lock(&fb_helper->dev->mode_config.mutex);
2582 drm_fb_helper_for_each_connector(fb_helper, i) {
2583 struct drm_connector *connector =
2584 fb_helper->connector_info[i]->connector;
2585
2586 /* use first connected connector for the physical dimensions */
2587 if (connector->status == connector_status_connected) {
2588 info->var.width = connector->display_info.width_mm;
2589 info->var.height = connector->display_info.height_mm;
2590 break;
2591 }
2592 }
2593 mutex_unlock(&fb_helper->dev->mode_config.mutex);
2594
2595 switch (fb_helper->sw_rotations) {
2596 case DRM_MODE_ROTATE_0:
2597 info->fbcon_rotate_hint = FB_ROTATE_UR;
2598 break;
2599 case DRM_MODE_ROTATE_90:
2600 info->fbcon_rotate_hint = FB_ROTATE_CCW;
2601 break;
2602 case DRM_MODE_ROTATE_180:
2603 info->fbcon_rotate_hint = FB_ROTATE_UD;
2604 break;
2605 case DRM_MODE_ROTATE_270:
2606 info->fbcon_rotate_hint = FB_ROTATE_CW;
2607 break;
2608 default:
2609 /*
2610 * Multiple bits are set / multiple rotations requested
2611 * fbcon cannot handle separate rotation settings per
2612 * output, so fallback to unrotated.
2613 */
2614 info->fbcon_rotate_hint = FB_ROTATE_UR;
2615 }
2616}
2617
2618/* Note: Drops fb_helper->lock before returning. */
2619static int
2620__drm_fb_helper_initial_config_and_unlock(struct drm_fb_helper *fb_helper,
2621 int bpp_sel)
2622{
2623 struct drm_device *dev = fb_helper->dev;
2624 struct fb_info *info;
2625 unsigned int width, height;
2626 int ret;
2627
2628 width = dev->mode_config.max_width;
2629 height = dev->mode_config.max_height;
2630
2631 drm_setup_crtcs(fb_helper, width, height);
2632 ret = drm_fb_helper_single_fb_probe(fb_helper, bpp_sel);
2633 if (ret < 0) {
2634 if (ret == -EAGAIN) {
2635 fb_helper->preferred_bpp = bpp_sel;
2636 fb_helper->deferred_setup = true;
2637 ret = 0;
2638 }
2639 mutex_unlock(&fb_helper->lock);
2640
2641 return ret;
2642 }
2643 drm_setup_crtcs_fb(fb_helper);
2644
2645 fb_helper->deferred_setup = false;
2646
2647 info = fb_helper->fbdev;
2648 info->var.pixclock = 0;
2649
2650 /* Need to drop locks to avoid recursive deadlock in
2651 * register_framebuffer. This is ok because the only thing left to do is
2652 * register the fbdev emulation instance in kernel_fb_helper_list. */
2653 mutex_unlock(&fb_helper->lock);
2654
2655 ret = register_framebuffer(info);
2656 if (ret < 0)
2657 return ret;
2658
2659 dev_info(dev->dev, "fb%d: %s frame buffer device\n",
2660 info->node, info->fix.id);
2661
2662 mutex_lock(&kernel_fb_helper_lock);
2663 if (list_empty(&kernel_fb_helper_list))
2664 register_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
2665
2666 list_add(&fb_helper->kernel_fb_list, &kernel_fb_helper_list);
2667 mutex_unlock(&kernel_fb_helper_lock);
2668
2669 return 0;
2670}
2671
2672/**
2673 * drm_fb_helper_initial_config - setup a sane initial connector configuration
2674 * @fb_helper: fb_helper device struct
2675 * @bpp_sel: bpp value to use for the framebuffer configuration
2676 *
2677 * Scans the CRTCs and connectors and tries to put together an initial setup.
2678 * At the moment, this is a cloned configuration across all heads with
2679 * a new framebuffer object as the backing store.
2680 *
2681 * Note that this also registers the fbdev and so allows userspace to call into
2682 * the driver through the fbdev interfaces.
2683 *
2684 * This function will call down into the &drm_fb_helper_funcs.fb_probe callback
2685 * to let the driver allocate and initialize the fbdev info structure and the
2686 * drm framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
2687 * drm_fb_helper_fill_fix() are provided as helpers to setup simple default
2688 * values for the fbdev info structure.
2689 *
2690 * HANG DEBUGGING:
2691 *
2692 * When you have fbcon support built-in or already loaded, this function will do
2693 * a full modeset to setup the fbdev console. Due to locking misdesign in the
2694 * VT/fbdev subsystem that entire modeset sequence has to be done while holding
2695 * console_lock. Until console_unlock is called no dmesg lines will be sent out
2696 * to consoles, not even serial console. This means when your driver crashes,
2697 * you will see absolutely nothing else but a system stuck in this function,
2698 * with no further output. Any kind of printk() you place within your own driver
2699 * or in the drm core modeset code will also never show up.
2700 *
2701 * Standard debug practice is to run the fbcon setup without taking the
2702 * console_lock as a hack, to be able to see backtraces and crashes on the
2703 * serial line. This can be done by setting the fb.lockless_register_fb=1 kernel
2704 * cmdline option.
2705 *
2706 * The other option is to just disable fbdev emulation since very likely the
2707 * first modeset from userspace will crash in the same way, and is even easier
2708 * to debug. This can be done by setting the drm_kms_helper.fbdev_emulation=0
2709 * kernel cmdline option.
2710 *
2711 * RETURNS:
2712 * Zero if everything went ok, nonzero otherwise.
2713 */
2714int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel)
2715{
2716 int ret;
2717
2718 if (!drm_fbdev_emulation)
2719 return 0;
2720
2721 mutex_lock(&fb_helper->lock);
2722 ret = __drm_fb_helper_initial_config_and_unlock(fb_helper, bpp_sel);
2723
2724 return ret;
2725}
2726EXPORT_SYMBOL(drm_fb_helper_initial_config);
2727
2728/**
2729 * drm_fb_helper_hotplug_event - respond to a hotplug notification by
2730 * probing all the outputs attached to the fb
2731 * @fb_helper: driver-allocated fbdev helper, can be NULL
2732 *
2733 * Scan the connectors attached to the fb_helper and try to put together a
2734 * setup after notification of a change in output configuration.
2735 *
2736 * Called at runtime, takes the mode config locks to be able to check/change the
2737 * modeset configuration. Must be run from process context (which usually means
2738 * either the output polling work or a work item launched from the driver's
2739 * hotplug interrupt).
2740 *
2741 * Note that drivers may call this even before calling
2742 * drm_fb_helper_initial_config but only after drm_fb_helper_init. This allows
2743 * for a race-free fbcon setup and will make sure that the fbdev emulation will
2744 * not miss any hotplug events.
2745 *
2746 * RETURNS:
2747 * 0 on success and a non-zero error code otherwise.
2748 */
2749int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
2750{
2751 int err = 0;
2752
2753 if (!drm_fbdev_emulation || !fb_helper)
2754 return 0;
2755
2756 mutex_lock(&fb_helper->lock);
2757 if (fb_helper->deferred_setup) {
2758 err = __drm_fb_helper_initial_config_and_unlock(fb_helper,
2759 fb_helper->preferred_bpp);
2760 return err;
2761 }
2762
2763 if (!fb_helper->fb || !drm_fb_helper_is_bound(fb_helper)) {
2764 fb_helper->delayed_hotplug = true;
2765 mutex_unlock(&fb_helper->lock);
2766 return err;
2767 }
2768
2769 DRM_DEBUG_KMS("\n");
2770
2771 drm_setup_crtcs(fb_helper, fb_helper->fb->width, fb_helper->fb->height);
2772 drm_setup_crtcs_fb(fb_helper);
2773 mutex_unlock(&fb_helper->lock);
2774
2775 drm_fb_helper_set_par(fb_helper->fbdev);
2776
2777 return 0;
2778}
2779EXPORT_SYMBOL(drm_fb_helper_hotplug_event);
2780
2781/**
2782 * drm_fb_helper_fbdev_setup() - Setup fbdev emulation
2783 * @dev: DRM device
2784 * @fb_helper: fbdev helper structure to set up
2785 * @funcs: fbdev helper functions
2786 * @preferred_bpp: Preferred bits per pixel for the device.
2787 * @dev->mode_config.preferred_depth is used if this is zero.
2788 * @max_conn_count: Maximum number of connectors.
2789 * @dev->mode_config.num_connector is used if this is zero.
2790 *
2791 * This function sets up fbdev emulation and registers fbdev for access by
2792 * userspace. If all connectors are disconnected, setup is deferred to the next
2793 * time drm_fb_helper_hotplug_event() is called.
2794 * The caller must to provide a &drm_fb_helper_funcs->fb_probe callback
2795 * function.
2796 *
2797 * See also: drm_fb_helper_initial_config()
2798 *
2799 * Returns:
2800 * Zero on success or negative error code on failure.
2801 */
2802int drm_fb_helper_fbdev_setup(struct drm_device *dev,
2803 struct drm_fb_helper *fb_helper,
2804 const struct drm_fb_helper_funcs *funcs,
2805 unsigned int preferred_bpp,
2806 unsigned int max_conn_count)
2807{
2808 int ret;
2809
2810 if (!preferred_bpp)
2811 preferred_bpp = dev->mode_config.preferred_depth;
2812 if (!preferred_bpp)
2813 preferred_bpp = 32;
2814
2815 if (!max_conn_count)
2816 max_conn_count = dev->mode_config.num_connector;
2817 if (!max_conn_count) {
2818 DRM_DEV_ERROR(dev->dev, "No connectors\n");
2819 return -EINVAL;
2820 }
2821
2822 drm_fb_helper_prepare(dev, fb_helper, funcs);
2823
2824 ret = drm_fb_helper_init(dev, fb_helper, max_conn_count);
2825 if (ret < 0) {
2826 DRM_DEV_ERROR(dev->dev, "Failed to initialize fbdev helper\n");
2827 return ret;
2828 }
2829
2830 ret = drm_fb_helper_single_add_all_connectors(fb_helper);
2831 if (ret < 0) {
2832 DRM_DEV_ERROR(dev->dev, "Failed to add connectors\n");
2833 goto err_drm_fb_helper_fini;
2834 }
2835
2836 if (!drm_drv_uses_atomic_modeset(dev))
2837 drm_helper_disable_unused_functions(dev);
2838
2839 ret = drm_fb_helper_initial_config(fb_helper, preferred_bpp);
2840 if (ret < 0) {
2841 DRM_DEV_ERROR(dev->dev, "Failed to set fbdev configuration\n");
2842 goto err_drm_fb_helper_fini;
2843 }
2844
2845 return 0;
2846
2847err_drm_fb_helper_fini:
2848 drm_fb_helper_fini(fb_helper);
2849
2850 return ret;
2851}
2852EXPORT_SYMBOL(drm_fb_helper_fbdev_setup);
2853
2854/**
2855 * drm_fb_helper_fbdev_teardown - Tear down fbdev emulation
2856 * @dev: DRM device
2857 *
2858 * This function unregisters fbdev if not already done and cleans up the
2859 * associated resources including the &drm_framebuffer.
2860 * The driver is responsible for freeing the &drm_fb_helper structure which is
2861 * stored in &drm_device->fb_helper. Do note that this pointer has been cleared
2862 * when this function returns.
2863 *
2864 * In order to support device removal/unplug while file handles are still open,
2865 * drm_fb_helper_unregister_fbi() should be called on device removal and
2866 * drm_fb_helper_fbdev_teardown() in the &drm_driver->release callback when
2867 * file handles are closed.
2868 */
2869void drm_fb_helper_fbdev_teardown(struct drm_device *dev)
2870{
2871 struct drm_fb_helper *fb_helper = dev->fb_helper;
2872 struct fb_ops *fbops = NULL;
2873
2874 if (!fb_helper)
2875 return;
2876
2877 /* Unregister if it hasn't been done already */
2878 if (fb_helper->fbdev && fb_helper->fbdev->dev)
2879 drm_fb_helper_unregister_fbi(fb_helper);
2880
2881 if (fb_helper->fbdev && fb_helper->fbdev->fbdefio) {
2882 fb_deferred_io_cleanup(fb_helper->fbdev);
2883 kfree(fb_helper->fbdev->fbdefio);
2884 fbops = fb_helper->fbdev->fbops;
2885 }
2886
2887 drm_fb_helper_fini(fb_helper);
2888 kfree(fbops);
2889
2890 if (fb_helper->fb)
2891 drm_framebuffer_remove(fb_helper->fb);
2892}
2893EXPORT_SYMBOL(drm_fb_helper_fbdev_teardown);
2894
2895/**
2896 * drm_fb_helper_lastclose - DRM driver lastclose helper for fbdev emulation
2897 * @dev: DRM device
2898 *
2899 * This function can be used as the &drm_driver->lastclose callback for drivers
2900 * that only need to call drm_fb_helper_restore_fbdev_mode_unlocked().
2901 */
2902void drm_fb_helper_lastclose(struct drm_device *dev)
2903{
2904 drm_fb_helper_restore_fbdev_mode_unlocked(dev->fb_helper);
2905}
2906EXPORT_SYMBOL(drm_fb_helper_lastclose);
2907
2908/**
2909 * drm_fb_helper_output_poll_changed - DRM mode config \.output_poll_changed
2910 * helper for fbdev emulation
2911 * @dev: DRM device
2912 *
2913 * This function can be used as the
2914 * &drm_mode_config_funcs.output_poll_changed callback for drivers that only
2915 * need to call drm_fb_helper_hotplug_event().
2916 */
2917void drm_fb_helper_output_poll_changed(struct drm_device *dev)
2918{
2919 drm_fb_helper_hotplug_event(dev->fb_helper);
2920}
2921EXPORT_SYMBOL(drm_fb_helper_output_poll_changed);
2922
2923/* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT)
2924 * but the module doesn't depend on any fb console symbols. At least
2925 * attempt to load fbcon to avoid leaving the system without a usable console.
2926 */
2927int __init drm_fb_helper_modinit(void)
2928{
2929#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
2930 const char name[] = "fbcon";
2931 struct module *fbcon;
2932
2933 mutex_lock(&module_mutex);
2934 fbcon = find_module(name);
2935 mutex_unlock(&module_mutex);
2936
2937 if (!fbcon)
2938 request_module_nowait(name);
2939#endif
2940 return 0;
2941}
2942EXPORT_SYMBOL(drm_fb_helper_modinit);