Loading...
1/*
2 * Freescale eSDHC controller driver.
3 *
4 * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
5 * Copyright (c) 2009 MontaVista Software, Inc.
6 *
7 * Authors: Xiaobo Xie <X.Xie@freescale.com>
8 * Anton Vorontsov <avorontsov@ru.mvista.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or (at
13 * your option) any later version.
14 */
15
16#include <linux/err.h>
17#include <linux/io.h>
18#include <linux/of.h>
19#include <linux/delay.h>
20#include <linux/module.h>
21#include <linux/mmc/host.h>
22#include "sdhci-pltfm.h"
23#include "sdhci-esdhc.h"
24
25#define VENDOR_V_22 0x12
26#define VENDOR_V_23 0x13
27
28struct sdhci_esdhc {
29 u8 vendor_ver;
30 u8 spec_ver;
31};
32
33/**
34 * esdhc_read*_fixup - Fixup the value read from incompatible eSDHC register
35 * to make it compatible with SD spec.
36 *
37 * @host: pointer to sdhci_host
38 * @spec_reg: SD spec register address
39 * @value: 32bit eSDHC register value on spec_reg address
40 *
41 * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
42 * registers are 32 bits. There are differences in register size, register
43 * address, register function, bit position and function between eSDHC spec
44 * and SD spec.
45 *
46 * Return a fixed up register value
47 */
48static u32 esdhc_readl_fixup(struct sdhci_host *host,
49 int spec_reg, u32 value)
50{
51 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
52 struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
53 u32 ret;
54
55 /*
56 * The bit of ADMA flag in eSDHC is not compatible with standard
57 * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
58 * supported by eSDHC.
59 * And for many FSL eSDHC controller, the reset value of field
60 * SDHCI_CAN_DO_ADMA1 is 1, but some of them can't support ADMA,
61 * only these vendor version is greater than 2.2/0x12 support ADMA.
62 */
63 if ((spec_reg == SDHCI_CAPABILITIES) && (value & SDHCI_CAN_DO_ADMA1)) {
64 if (esdhc->vendor_ver > VENDOR_V_22) {
65 ret = value | SDHCI_CAN_DO_ADMA2;
66 return ret;
67 }
68 }
69 ret = value;
70 return ret;
71}
72
73static u16 esdhc_readw_fixup(struct sdhci_host *host,
74 int spec_reg, u32 value)
75{
76 u16 ret;
77 int shift = (spec_reg & 0x2) * 8;
78
79 if (spec_reg == SDHCI_HOST_VERSION)
80 ret = value & 0xffff;
81 else
82 ret = (value >> shift) & 0xffff;
83 return ret;
84}
85
86static u8 esdhc_readb_fixup(struct sdhci_host *host,
87 int spec_reg, u32 value)
88{
89 u8 ret;
90 u8 dma_bits;
91 int shift = (spec_reg & 0x3) * 8;
92
93 ret = (value >> shift) & 0xff;
94
95 /*
96 * "DMA select" locates at offset 0x28 in SD specification, but on
97 * P5020 or P3041, it locates at 0x29.
98 */
99 if (spec_reg == SDHCI_HOST_CONTROL) {
100 /* DMA select is 22,23 bits in Protocol Control Register */
101 dma_bits = (value >> 5) & SDHCI_CTRL_DMA_MASK;
102 /* fixup the result */
103 ret &= ~SDHCI_CTRL_DMA_MASK;
104 ret |= dma_bits;
105 }
106 return ret;
107}
108
109/**
110 * esdhc_write*_fixup - Fixup the SD spec register value so that it could be
111 * written into eSDHC register.
112 *
113 * @host: pointer to sdhci_host
114 * @spec_reg: SD spec register address
115 * @value: 8/16/32bit SD spec register value that would be written
116 * @old_value: 32bit eSDHC register value on spec_reg address
117 *
118 * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
119 * registers are 32 bits. There are differences in register size, register
120 * address, register function, bit position and function between eSDHC spec
121 * and SD spec.
122 *
123 * Return a fixed up register value
124 */
125static u32 esdhc_writel_fixup(struct sdhci_host *host,
126 int spec_reg, u32 value, u32 old_value)
127{
128 u32 ret;
129
130 /*
131 * Enabling IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
132 * when SYSCTL[RSTD] is set for some special operations.
133 * No any impact on other operation.
134 */
135 if (spec_reg == SDHCI_INT_ENABLE)
136 ret = value | SDHCI_INT_BLK_GAP;
137 else
138 ret = value;
139
140 return ret;
141}
142
143static u32 esdhc_writew_fixup(struct sdhci_host *host,
144 int spec_reg, u16 value, u32 old_value)
145{
146 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
147 int shift = (spec_reg & 0x2) * 8;
148 u32 ret;
149
150 switch (spec_reg) {
151 case SDHCI_TRANSFER_MODE:
152 /*
153 * Postpone this write, we must do it together with a
154 * command write that is down below. Return old value.
155 */
156 pltfm_host->xfer_mode_shadow = value;
157 return old_value;
158 case SDHCI_COMMAND:
159 ret = (value << 16) | pltfm_host->xfer_mode_shadow;
160 return ret;
161 }
162
163 ret = old_value & (~(0xffff << shift));
164 ret |= (value << shift);
165
166 if (spec_reg == SDHCI_BLOCK_SIZE) {
167 /*
168 * Two last DMA bits are reserved, and first one is used for
169 * non-standard blksz of 4096 bytes that we don't support
170 * yet. So clear the DMA boundary bits.
171 */
172 ret &= (~SDHCI_MAKE_BLKSZ(0x7, 0));
173 }
174 return ret;
175}
176
177static u32 esdhc_writeb_fixup(struct sdhci_host *host,
178 int spec_reg, u8 value, u32 old_value)
179{
180 u32 ret;
181 u32 dma_bits;
182 u8 tmp;
183 int shift = (spec_reg & 0x3) * 8;
184
185 /*
186 * eSDHC doesn't have a standard power control register, so we do
187 * nothing here to avoid incorrect operation.
188 */
189 if (spec_reg == SDHCI_POWER_CONTROL)
190 return old_value;
191 /*
192 * "DMA select" location is offset 0x28 in SD specification, but on
193 * P5020 or P3041, it's located at 0x29.
194 */
195 if (spec_reg == SDHCI_HOST_CONTROL) {
196 /*
197 * If host control register is not standard, exit
198 * this function
199 */
200 if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
201 return old_value;
202
203 /* DMA select is 22,23 bits in Protocol Control Register */
204 dma_bits = (value & SDHCI_CTRL_DMA_MASK) << 5;
205 ret = (old_value & (~(SDHCI_CTRL_DMA_MASK << 5))) | dma_bits;
206 tmp = (value & (~SDHCI_CTRL_DMA_MASK)) |
207 (old_value & SDHCI_CTRL_DMA_MASK);
208 ret = (ret & (~0xff)) | tmp;
209
210 /* Prevent SDHCI core from writing reserved bits (e.g. HISPD) */
211 ret &= ~ESDHC_HOST_CONTROL_RES;
212 return ret;
213 }
214
215 ret = (old_value & (~(0xff << shift))) | (value << shift);
216 return ret;
217}
218
219static u32 esdhc_be_readl(struct sdhci_host *host, int reg)
220{
221 u32 ret;
222 u32 value;
223
224 value = ioread32be(host->ioaddr + reg);
225 ret = esdhc_readl_fixup(host, reg, value);
226
227 return ret;
228}
229
230static u32 esdhc_le_readl(struct sdhci_host *host, int reg)
231{
232 u32 ret;
233 u32 value;
234
235 value = ioread32(host->ioaddr + reg);
236 ret = esdhc_readl_fixup(host, reg, value);
237
238 return ret;
239}
240
241static u16 esdhc_be_readw(struct sdhci_host *host, int reg)
242{
243 u16 ret;
244 u32 value;
245 int base = reg & ~0x3;
246
247 value = ioread32be(host->ioaddr + base);
248 ret = esdhc_readw_fixup(host, reg, value);
249 return ret;
250}
251
252static u16 esdhc_le_readw(struct sdhci_host *host, int reg)
253{
254 u16 ret;
255 u32 value;
256 int base = reg & ~0x3;
257
258 value = ioread32(host->ioaddr + base);
259 ret = esdhc_readw_fixup(host, reg, value);
260 return ret;
261}
262
263static u8 esdhc_be_readb(struct sdhci_host *host, int reg)
264{
265 u8 ret;
266 u32 value;
267 int base = reg & ~0x3;
268
269 value = ioread32be(host->ioaddr + base);
270 ret = esdhc_readb_fixup(host, reg, value);
271 return ret;
272}
273
274static u8 esdhc_le_readb(struct sdhci_host *host, int reg)
275{
276 u8 ret;
277 u32 value;
278 int base = reg & ~0x3;
279
280 value = ioread32(host->ioaddr + base);
281 ret = esdhc_readb_fixup(host, reg, value);
282 return ret;
283}
284
285static void esdhc_be_writel(struct sdhci_host *host, u32 val, int reg)
286{
287 u32 value;
288
289 value = esdhc_writel_fixup(host, reg, val, 0);
290 iowrite32be(value, host->ioaddr + reg);
291}
292
293static void esdhc_le_writel(struct sdhci_host *host, u32 val, int reg)
294{
295 u32 value;
296
297 value = esdhc_writel_fixup(host, reg, val, 0);
298 iowrite32(value, host->ioaddr + reg);
299}
300
301static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg)
302{
303 int base = reg & ~0x3;
304 u32 value;
305 u32 ret;
306
307 value = ioread32be(host->ioaddr + base);
308 ret = esdhc_writew_fixup(host, reg, val, value);
309 if (reg != SDHCI_TRANSFER_MODE)
310 iowrite32be(ret, host->ioaddr + base);
311}
312
313static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg)
314{
315 int base = reg & ~0x3;
316 u32 value;
317 u32 ret;
318
319 value = ioread32(host->ioaddr + base);
320 ret = esdhc_writew_fixup(host, reg, val, value);
321 if (reg != SDHCI_TRANSFER_MODE)
322 iowrite32(ret, host->ioaddr + base);
323}
324
325static void esdhc_be_writeb(struct sdhci_host *host, u8 val, int reg)
326{
327 int base = reg & ~0x3;
328 u32 value;
329 u32 ret;
330
331 value = ioread32be(host->ioaddr + base);
332 ret = esdhc_writeb_fixup(host, reg, val, value);
333 iowrite32be(ret, host->ioaddr + base);
334}
335
336static void esdhc_le_writeb(struct sdhci_host *host, u8 val, int reg)
337{
338 int base = reg & ~0x3;
339 u32 value;
340 u32 ret;
341
342 value = ioread32(host->ioaddr + base);
343 ret = esdhc_writeb_fixup(host, reg, val, value);
344 iowrite32(ret, host->ioaddr + base);
345}
346
347/*
348 * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
349 * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
350 * and Block Gap Event(IRQSTAT[BGE]) are also set.
351 * For Continue, apply soft reset for data(SYSCTL[RSTD]);
352 * and re-issue the entire read transaction from beginning.
353 */
354static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask)
355{
356 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
357 struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
358 bool applicable;
359 dma_addr_t dmastart;
360 dma_addr_t dmanow;
361
362 applicable = (intmask & SDHCI_INT_DATA_END) &&
363 (intmask & SDHCI_INT_BLK_GAP) &&
364 (esdhc->vendor_ver == VENDOR_V_23);
365 if (!applicable)
366 return;
367
368 host->data->error = 0;
369 dmastart = sg_dma_address(host->data->sg);
370 dmanow = dmastart + host->data->bytes_xfered;
371 /*
372 * Force update to the next DMA block boundary.
373 */
374 dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
375 SDHCI_DEFAULT_BOUNDARY_SIZE;
376 host->data->bytes_xfered = dmanow - dmastart;
377 sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
378}
379
380static int esdhc_of_enable_dma(struct sdhci_host *host)
381{
382 u32 value;
383
384 value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
385 value |= ESDHC_DMA_SNOOP;
386 sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
387 return 0;
388}
389
390static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
391{
392 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
393
394 return pltfm_host->clock;
395}
396
397static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
398{
399 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
400
401 return pltfm_host->clock / 256 / 16;
402}
403
404static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
405{
406 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
407 struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
408 int pre_div = 1;
409 int div = 1;
410 u32 temp;
411
412 host->mmc->actual_clock = 0;
413
414 if (clock == 0)
415 return;
416
417 /* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
418 if (esdhc->vendor_ver < VENDOR_V_23)
419 pre_div = 2;
420
421 /* Workaround to reduce the clock frequency for p1010 esdhc */
422 if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
423 if (clock > 20000000)
424 clock -= 5000000;
425 if (clock > 40000000)
426 clock -= 5000000;
427 }
428
429 temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
430 temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
431 | ESDHC_CLOCK_MASK);
432 sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
433
434 while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
435 pre_div *= 2;
436
437 while (host->max_clk / pre_div / div > clock && div < 16)
438 div++;
439
440 dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
441 clock, host->max_clk / pre_div / div);
442 host->mmc->actual_clock = host->max_clk / pre_div / div;
443 pre_div >>= 1;
444 div--;
445
446 temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
447 temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
448 | (div << ESDHC_DIVIDER_SHIFT)
449 | (pre_div << ESDHC_PREDIV_SHIFT));
450 sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
451 mdelay(1);
452}
453
454static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
455{
456 u32 ctrl;
457
458 ctrl = sdhci_readl(host, ESDHC_PROCTL);
459 ctrl &= (~ESDHC_CTRL_BUSWIDTH_MASK);
460 switch (width) {
461 case MMC_BUS_WIDTH_8:
462 ctrl |= ESDHC_CTRL_8BITBUS;
463 break;
464
465 case MMC_BUS_WIDTH_4:
466 ctrl |= ESDHC_CTRL_4BITBUS;
467 break;
468
469 default:
470 break;
471 }
472
473 sdhci_writel(host, ctrl, ESDHC_PROCTL);
474}
475
476static void esdhc_reset(struct sdhci_host *host, u8 mask)
477{
478 sdhci_reset(host, mask);
479
480 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
481 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
482}
483
484#ifdef CONFIG_PM
485static u32 esdhc_proctl;
486static int esdhc_of_suspend(struct device *dev)
487{
488 struct sdhci_host *host = dev_get_drvdata(dev);
489
490 esdhc_proctl = sdhci_readl(host, SDHCI_HOST_CONTROL);
491
492 return sdhci_suspend_host(host);
493}
494
495static int esdhc_of_resume(struct device *dev)
496{
497 struct sdhci_host *host = dev_get_drvdata(dev);
498 int ret = sdhci_resume_host(host);
499
500 if (ret == 0) {
501 /* Isn't this already done by sdhci_resume_host() ? --rmk */
502 esdhc_of_enable_dma(host);
503 sdhci_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
504 }
505 return ret;
506}
507
508static const struct dev_pm_ops esdhc_pmops = {
509 .suspend = esdhc_of_suspend,
510 .resume = esdhc_of_resume,
511};
512#define ESDHC_PMOPS (&esdhc_pmops)
513#else
514#define ESDHC_PMOPS NULL
515#endif
516
517static const struct sdhci_ops sdhci_esdhc_be_ops = {
518 .read_l = esdhc_be_readl,
519 .read_w = esdhc_be_readw,
520 .read_b = esdhc_be_readb,
521 .write_l = esdhc_be_writel,
522 .write_w = esdhc_be_writew,
523 .write_b = esdhc_be_writeb,
524 .set_clock = esdhc_of_set_clock,
525 .enable_dma = esdhc_of_enable_dma,
526 .get_max_clock = esdhc_of_get_max_clock,
527 .get_min_clock = esdhc_of_get_min_clock,
528 .adma_workaround = esdhc_of_adma_workaround,
529 .set_bus_width = esdhc_pltfm_set_bus_width,
530 .reset = esdhc_reset,
531 .set_uhs_signaling = sdhci_set_uhs_signaling,
532};
533
534static const struct sdhci_ops sdhci_esdhc_le_ops = {
535 .read_l = esdhc_le_readl,
536 .read_w = esdhc_le_readw,
537 .read_b = esdhc_le_readb,
538 .write_l = esdhc_le_writel,
539 .write_w = esdhc_le_writew,
540 .write_b = esdhc_le_writeb,
541 .set_clock = esdhc_of_set_clock,
542 .enable_dma = esdhc_of_enable_dma,
543 .get_max_clock = esdhc_of_get_max_clock,
544 .get_min_clock = esdhc_of_get_min_clock,
545 .adma_workaround = esdhc_of_adma_workaround,
546 .set_bus_width = esdhc_pltfm_set_bus_width,
547 .reset = esdhc_reset,
548 .set_uhs_signaling = sdhci_set_uhs_signaling,
549};
550
551static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
552 .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
553 | SDHCI_QUIRK_NO_CARD_NO_RESET
554 | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
555 .ops = &sdhci_esdhc_be_ops,
556};
557
558static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
559 .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
560 | SDHCI_QUIRK_NO_CARD_NO_RESET
561 | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
562 .ops = &sdhci_esdhc_le_ops,
563};
564
565static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
566{
567 struct sdhci_pltfm_host *pltfm_host;
568 struct sdhci_esdhc *esdhc;
569 u16 host_ver;
570
571 pltfm_host = sdhci_priv(host);
572 esdhc = sdhci_pltfm_priv(pltfm_host);
573
574 host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
575 esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
576 SDHCI_VENDOR_VER_SHIFT;
577 esdhc->spec_ver = host_ver & SDHCI_SPEC_VER_MASK;
578}
579
580static int sdhci_esdhc_probe(struct platform_device *pdev)
581{
582 struct sdhci_host *host;
583 struct device_node *np;
584 struct sdhci_pltfm_host *pltfm_host;
585 struct sdhci_esdhc *esdhc;
586 int ret;
587
588 np = pdev->dev.of_node;
589
590 if (of_get_property(np, "little-endian", NULL))
591 host = sdhci_pltfm_init(pdev, &sdhci_esdhc_le_pdata,
592 sizeof(struct sdhci_esdhc));
593 else
594 host = sdhci_pltfm_init(pdev, &sdhci_esdhc_be_pdata,
595 sizeof(struct sdhci_esdhc));
596
597 if (IS_ERR(host))
598 return PTR_ERR(host);
599
600 esdhc_init(pdev, host);
601
602 sdhci_get_of_property(pdev);
603
604 pltfm_host = sdhci_priv(host);
605 esdhc = sdhci_pltfm_priv(pltfm_host);
606 if (esdhc->vendor_ver == VENDOR_V_22)
607 host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
608
609 if (esdhc->vendor_ver > VENDOR_V_22)
610 host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
611
612 if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
613 of_device_is_compatible(np, "fsl,p5020-esdhc") ||
614 of_device_is_compatible(np, "fsl,p4080-esdhc") ||
615 of_device_is_compatible(np, "fsl,p1020-esdhc") ||
616 of_device_is_compatible(np, "fsl,t1040-esdhc") ||
617 of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
618 host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
619
620 if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
621 host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
622
623 if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
624 /*
625 * Freescale messed up with P2020 as it has a non-standard
626 * host control register
627 */
628 host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
629 }
630
631 /* call to generic mmc_of_parse to support additional capabilities */
632 ret = mmc_of_parse(host->mmc);
633 if (ret)
634 goto err;
635
636 mmc_of_parse_voltage(np, &host->ocr_mask);
637
638 ret = sdhci_add_host(host);
639 if (ret)
640 goto err;
641
642 return 0;
643 err:
644 sdhci_pltfm_free(pdev);
645 return ret;
646}
647
648static const struct of_device_id sdhci_esdhc_of_match[] = {
649 { .compatible = "fsl,mpc8379-esdhc" },
650 { .compatible = "fsl,mpc8536-esdhc" },
651 { .compatible = "fsl,esdhc" },
652 { }
653};
654MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
655
656static struct platform_driver sdhci_esdhc_driver = {
657 .driver = {
658 .name = "sdhci-esdhc",
659 .of_match_table = sdhci_esdhc_of_match,
660 .pm = ESDHC_PMOPS,
661 },
662 .probe = sdhci_esdhc_probe,
663 .remove = sdhci_pltfm_unregister,
664};
665
666module_platform_driver(sdhci_esdhc_driver);
667
668MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
669MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
670 "Anton Vorontsov <avorontsov@ru.mvista.com>");
671MODULE_LICENSE("GPL v2");
1/*
2 * Freescale eSDHC controller driver.
3 *
4 * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
5 * Copyright (c) 2009 MontaVista Software, Inc.
6 *
7 * Authors: Xiaobo Xie <X.Xie@freescale.com>
8 * Anton Vorontsov <avorontsov@ru.mvista.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or (at
13 * your option) any later version.
14 */
15
16#include <linux/err.h>
17#include <linux/io.h>
18#include <linux/of.h>
19#include <linux/delay.h>
20#include <linux/module.h>
21#include <linux/sys_soc.h>
22#include <linux/mmc/host.h>
23#include "sdhci-pltfm.h"
24#include "sdhci-esdhc.h"
25
26#define VENDOR_V_22 0x12
27#define VENDOR_V_23 0x13
28
29struct sdhci_esdhc {
30 u8 vendor_ver;
31 u8 spec_ver;
32 bool quirk_incorrect_hostver;
33};
34
35/**
36 * esdhc_read*_fixup - Fixup the value read from incompatible eSDHC register
37 * to make it compatible with SD spec.
38 *
39 * @host: pointer to sdhci_host
40 * @spec_reg: SD spec register address
41 * @value: 32bit eSDHC register value on spec_reg address
42 *
43 * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
44 * registers are 32 bits. There are differences in register size, register
45 * address, register function, bit position and function between eSDHC spec
46 * and SD spec.
47 *
48 * Return a fixed up register value
49 */
50static u32 esdhc_readl_fixup(struct sdhci_host *host,
51 int spec_reg, u32 value)
52{
53 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
54 struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
55 u32 ret;
56
57 /*
58 * The bit of ADMA flag in eSDHC is not compatible with standard
59 * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
60 * supported by eSDHC.
61 * And for many FSL eSDHC controller, the reset value of field
62 * SDHCI_CAN_DO_ADMA1 is 1, but some of them can't support ADMA,
63 * only these vendor version is greater than 2.2/0x12 support ADMA.
64 */
65 if ((spec_reg == SDHCI_CAPABILITIES) && (value & SDHCI_CAN_DO_ADMA1)) {
66 if (esdhc->vendor_ver > VENDOR_V_22) {
67 ret = value | SDHCI_CAN_DO_ADMA2;
68 return ret;
69 }
70 }
71 /*
72 * The DAT[3:0] line signal levels and the CMD line signal level are
73 * not compatible with standard SDHC register. The line signal levels
74 * DAT[7:0] are at bits 31:24 and the command line signal level is at
75 * bit 23. All other bits are the same as in the standard SDHC
76 * register.
77 */
78 if (spec_reg == SDHCI_PRESENT_STATE) {
79 ret = value & 0x000fffff;
80 ret |= (value >> 4) & SDHCI_DATA_LVL_MASK;
81 ret |= (value << 1) & SDHCI_CMD_LVL;
82 return ret;
83 }
84
85 ret = value;
86 return ret;
87}
88
89static u16 esdhc_readw_fixup(struct sdhci_host *host,
90 int spec_reg, u32 value)
91{
92 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
93 struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
94 u16 ret;
95 int shift = (spec_reg & 0x2) * 8;
96
97 if (spec_reg == SDHCI_HOST_VERSION)
98 ret = value & 0xffff;
99 else
100 ret = (value >> shift) & 0xffff;
101 /* Workaround for T4240-R1.0-R2.0 eSDHC which has incorrect
102 * vendor version and spec version information.
103 */
104 if ((spec_reg == SDHCI_HOST_VERSION) &&
105 (esdhc->quirk_incorrect_hostver))
106 ret = (VENDOR_V_23 << SDHCI_VENDOR_VER_SHIFT) | SDHCI_SPEC_200;
107 return ret;
108}
109
110static u8 esdhc_readb_fixup(struct sdhci_host *host,
111 int spec_reg, u32 value)
112{
113 u8 ret;
114 u8 dma_bits;
115 int shift = (spec_reg & 0x3) * 8;
116
117 ret = (value >> shift) & 0xff;
118
119 /*
120 * "DMA select" locates at offset 0x28 in SD specification, but on
121 * P5020 or P3041, it locates at 0x29.
122 */
123 if (spec_reg == SDHCI_HOST_CONTROL) {
124 /* DMA select is 22,23 bits in Protocol Control Register */
125 dma_bits = (value >> 5) & SDHCI_CTRL_DMA_MASK;
126 /* fixup the result */
127 ret &= ~SDHCI_CTRL_DMA_MASK;
128 ret |= dma_bits;
129 }
130 return ret;
131}
132
133/**
134 * esdhc_write*_fixup - Fixup the SD spec register value so that it could be
135 * written into eSDHC register.
136 *
137 * @host: pointer to sdhci_host
138 * @spec_reg: SD spec register address
139 * @value: 8/16/32bit SD spec register value that would be written
140 * @old_value: 32bit eSDHC register value on spec_reg address
141 *
142 * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
143 * registers are 32 bits. There are differences in register size, register
144 * address, register function, bit position and function between eSDHC spec
145 * and SD spec.
146 *
147 * Return a fixed up register value
148 */
149static u32 esdhc_writel_fixup(struct sdhci_host *host,
150 int spec_reg, u32 value, u32 old_value)
151{
152 u32 ret;
153
154 /*
155 * Enabling IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
156 * when SYSCTL[RSTD] is set for some special operations.
157 * No any impact on other operation.
158 */
159 if (spec_reg == SDHCI_INT_ENABLE)
160 ret = value | SDHCI_INT_BLK_GAP;
161 else
162 ret = value;
163
164 return ret;
165}
166
167static u32 esdhc_writew_fixup(struct sdhci_host *host,
168 int spec_reg, u16 value, u32 old_value)
169{
170 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
171 int shift = (spec_reg & 0x2) * 8;
172 u32 ret;
173
174 switch (spec_reg) {
175 case SDHCI_TRANSFER_MODE:
176 /*
177 * Postpone this write, we must do it together with a
178 * command write that is down below. Return old value.
179 */
180 pltfm_host->xfer_mode_shadow = value;
181 return old_value;
182 case SDHCI_COMMAND:
183 ret = (value << 16) | pltfm_host->xfer_mode_shadow;
184 return ret;
185 }
186
187 ret = old_value & (~(0xffff << shift));
188 ret |= (value << shift);
189
190 if (spec_reg == SDHCI_BLOCK_SIZE) {
191 /*
192 * Two last DMA bits are reserved, and first one is used for
193 * non-standard blksz of 4096 bytes that we don't support
194 * yet. So clear the DMA boundary bits.
195 */
196 ret &= (~SDHCI_MAKE_BLKSZ(0x7, 0));
197 }
198 return ret;
199}
200
201static u32 esdhc_writeb_fixup(struct sdhci_host *host,
202 int spec_reg, u8 value, u32 old_value)
203{
204 u32 ret;
205 u32 dma_bits;
206 u8 tmp;
207 int shift = (spec_reg & 0x3) * 8;
208
209 /*
210 * eSDHC doesn't have a standard power control register, so we do
211 * nothing here to avoid incorrect operation.
212 */
213 if (spec_reg == SDHCI_POWER_CONTROL)
214 return old_value;
215 /*
216 * "DMA select" location is offset 0x28 in SD specification, but on
217 * P5020 or P3041, it's located at 0x29.
218 */
219 if (spec_reg == SDHCI_HOST_CONTROL) {
220 /*
221 * If host control register is not standard, exit
222 * this function
223 */
224 if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
225 return old_value;
226
227 /* DMA select is 22,23 bits in Protocol Control Register */
228 dma_bits = (value & SDHCI_CTRL_DMA_MASK) << 5;
229 ret = (old_value & (~(SDHCI_CTRL_DMA_MASK << 5))) | dma_bits;
230 tmp = (value & (~SDHCI_CTRL_DMA_MASK)) |
231 (old_value & SDHCI_CTRL_DMA_MASK);
232 ret = (ret & (~0xff)) | tmp;
233
234 /* Prevent SDHCI core from writing reserved bits (e.g. HISPD) */
235 ret &= ~ESDHC_HOST_CONTROL_RES;
236 return ret;
237 }
238
239 ret = (old_value & (~(0xff << shift))) | (value << shift);
240 return ret;
241}
242
243static u32 esdhc_be_readl(struct sdhci_host *host, int reg)
244{
245 u32 ret;
246 u32 value;
247
248 value = ioread32be(host->ioaddr + reg);
249 ret = esdhc_readl_fixup(host, reg, value);
250
251 return ret;
252}
253
254static u32 esdhc_le_readl(struct sdhci_host *host, int reg)
255{
256 u32 ret;
257 u32 value;
258
259 value = ioread32(host->ioaddr + reg);
260 ret = esdhc_readl_fixup(host, reg, value);
261
262 return ret;
263}
264
265static u16 esdhc_be_readw(struct sdhci_host *host, int reg)
266{
267 u16 ret;
268 u32 value;
269 int base = reg & ~0x3;
270
271 value = ioread32be(host->ioaddr + base);
272 ret = esdhc_readw_fixup(host, reg, value);
273 return ret;
274}
275
276static u16 esdhc_le_readw(struct sdhci_host *host, int reg)
277{
278 u16 ret;
279 u32 value;
280 int base = reg & ~0x3;
281
282 value = ioread32(host->ioaddr + base);
283 ret = esdhc_readw_fixup(host, reg, value);
284 return ret;
285}
286
287static u8 esdhc_be_readb(struct sdhci_host *host, int reg)
288{
289 u8 ret;
290 u32 value;
291 int base = reg & ~0x3;
292
293 value = ioread32be(host->ioaddr + base);
294 ret = esdhc_readb_fixup(host, reg, value);
295 return ret;
296}
297
298static u8 esdhc_le_readb(struct sdhci_host *host, int reg)
299{
300 u8 ret;
301 u32 value;
302 int base = reg & ~0x3;
303
304 value = ioread32(host->ioaddr + base);
305 ret = esdhc_readb_fixup(host, reg, value);
306 return ret;
307}
308
309static void esdhc_be_writel(struct sdhci_host *host, u32 val, int reg)
310{
311 u32 value;
312
313 value = esdhc_writel_fixup(host, reg, val, 0);
314 iowrite32be(value, host->ioaddr + reg);
315}
316
317static void esdhc_le_writel(struct sdhci_host *host, u32 val, int reg)
318{
319 u32 value;
320
321 value = esdhc_writel_fixup(host, reg, val, 0);
322 iowrite32(value, host->ioaddr + reg);
323}
324
325static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg)
326{
327 int base = reg & ~0x3;
328 u32 value;
329 u32 ret;
330
331 value = ioread32be(host->ioaddr + base);
332 ret = esdhc_writew_fixup(host, reg, val, value);
333 if (reg != SDHCI_TRANSFER_MODE)
334 iowrite32be(ret, host->ioaddr + base);
335}
336
337static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg)
338{
339 int base = reg & ~0x3;
340 u32 value;
341 u32 ret;
342
343 value = ioread32(host->ioaddr + base);
344 ret = esdhc_writew_fixup(host, reg, val, value);
345 if (reg != SDHCI_TRANSFER_MODE)
346 iowrite32(ret, host->ioaddr + base);
347}
348
349static void esdhc_be_writeb(struct sdhci_host *host, u8 val, int reg)
350{
351 int base = reg & ~0x3;
352 u32 value;
353 u32 ret;
354
355 value = ioread32be(host->ioaddr + base);
356 ret = esdhc_writeb_fixup(host, reg, val, value);
357 iowrite32be(ret, host->ioaddr + base);
358}
359
360static void esdhc_le_writeb(struct sdhci_host *host, u8 val, int reg)
361{
362 int base = reg & ~0x3;
363 u32 value;
364 u32 ret;
365
366 value = ioread32(host->ioaddr + base);
367 ret = esdhc_writeb_fixup(host, reg, val, value);
368 iowrite32(ret, host->ioaddr + base);
369}
370
371/*
372 * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
373 * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
374 * and Block Gap Event(IRQSTAT[BGE]) are also set.
375 * For Continue, apply soft reset for data(SYSCTL[RSTD]);
376 * and re-issue the entire read transaction from beginning.
377 */
378static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask)
379{
380 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
381 struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
382 bool applicable;
383 dma_addr_t dmastart;
384 dma_addr_t dmanow;
385
386 applicable = (intmask & SDHCI_INT_DATA_END) &&
387 (intmask & SDHCI_INT_BLK_GAP) &&
388 (esdhc->vendor_ver == VENDOR_V_23);
389 if (!applicable)
390 return;
391
392 host->data->error = 0;
393 dmastart = sg_dma_address(host->data->sg);
394 dmanow = dmastart + host->data->bytes_xfered;
395 /*
396 * Force update to the next DMA block boundary.
397 */
398 dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
399 SDHCI_DEFAULT_BOUNDARY_SIZE;
400 host->data->bytes_xfered = dmanow - dmastart;
401 sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
402}
403
404static int esdhc_of_enable_dma(struct sdhci_host *host)
405{
406 u32 value;
407
408 value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
409 value |= ESDHC_DMA_SNOOP;
410 sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
411 return 0;
412}
413
414static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
415{
416 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
417
418 return pltfm_host->clock;
419}
420
421static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
422{
423 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
424
425 return pltfm_host->clock / 256 / 16;
426}
427
428static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
429{
430 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
431 struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
432 int pre_div = 1;
433 int div = 1;
434 u32 temp;
435
436 host->mmc->actual_clock = 0;
437
438 if (clock == 0)
439 return;
440
441 /* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
442 if (esdhc->vendor_ver < VENDOR_V_23)
443 pre_div = 2;
444
445 /* Workaround to reduce the clock frequency for p1010 esdhc */
446 if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
447 if (clock > 20000000)
448 clock -= 5000000;
449 if (clock > 40000000)
450 clock -= 5000000;
451 }
452
453 temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
454 temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
455 | ESDHC_CLOCK_MASK);
456 sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
457
458 while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
459 pre_div *= 2;
460
461 while (host->max_clk / pre_div / div > clock && div < 16)
462 div++;
463
464 dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
465 clock, host->max_clk / pre_div / div);
466 host->mmc->actual_clock = host->max_clk / pre_div / div;
467 pre_div >>= 1;
468 div--;
469
470 temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
471 temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
472 | (div << ESDHC_DIVIDER_SHIFT)
473 | (pre_div << ESDHC_PREDIV_SHIFT));
474 sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
475 mdelay(1);
476}
477
478static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
479{
480 u32 ctrl;
481
482 ctrl = sdhci_readl(host, ESDHC_PROCTL);
483 ctrl &= (~ESDHC_CTRL_BUSWIDTH_MASK);
484 switch (width) {
485 case MMC_BUS_WIDTH_8:
486 ctrl |= ESDHC_CTRL_8BITBUS;
487 break;
488
489 case MMC_BUS_WIDTH_4:
490 ctrl |= ESDHC_CTRL_4BITBUS;
491 break;
492
493 default:
494 break;
495 }
496
497 sdhci_writel(host, ctrl, ESDHC_PROCTL);
498}
499
500static void esdhc_reset(struct sdhci_host *host, u8 mask)
501{
502 sdhci_reset(host, mask);
503
504 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
505 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
506}
507
508#ifdef CONFIG_PM_SLEEP
509static u32 esdhc_proctl;
510static int esdhc_of_suspend(struct device *dev)
511{
512 struct sdhci_host *host = dev_get_drvdata(dev);
513
514 esdhc_proctl = sdhci_readl(host, SDHCI_HOST_CONTROL);
515
516 return sdhci_suspend_host(host);
517}
518
519static int esdhc_of_resume(struct device *dev)
520{
521 struct sdhci_host *host = dev_get_drvdata(dev);
522 int ret = sdhci_resume_host(host);
523
524 if (ret == 0) {
525 /* Isn't this already done by sdhci_resume_host() ? --rmk */
526 esdhc_of_enable_dma(host);
527 sdhci_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
528 }
529 return ret;
530}
531#endif
532
533static SIMPLE_DEV_PM_OPS(esdhc_of_dev_pm_ops,
534 esdhc_of_suspend,
535 esdhc_of_resume);
536
537static const struct sdhci_ops sdhci_esdhc_be_ops = {
538 .read_l = esdhc_be_readl,
539 .read_w = esdhc_be_readw,
540 .read_b = esdhc_be_readb,
541 .write_l = esdhc_be_writel,
542 .write_w = esdhc_be_writew,
543 .write_b = esdhc_be_writeb,
544 .set_clock = esdhc_of_set_clock,
545 .enable_dma = esdhc_of_enable_dma,
546 .get_max_clock = esdhc_of_get_max_clock,
547 .get_min_clock = esdhc_of_get_min_clock,
548 .adma_workaround = esdhc_of_adma_workaround,
549 .set_bus_width = esdhc_pltfm_set_bus_width,
550 .reset = esdhc_reset,
551 .set_uhs_signaling = sdhci_set_uhs_signaling,
552};
553
554static const struct sdhci_ops sdhci_esdhc_le_ops = {
555 .read_l = esdhc_le_readl,
556 .read_w = esdhc_le_readw,
557 .read_b = esdhc_le_readb,
558 .write_l = esdhc_le_writel,
559 .write_w = esdhc_le_writew,
560 .write_b = esdhc_le_writeb,
561 .set_clock = esdhc_of_set_clock,
562 .enable_dma = esdhc_of_enable_dma,
563 .get_max_clock = esdhc_of_get_max_clock,
564 .get_min_clock = esdhc_of_get_min_clock,
565 .adma_workaround = esdhc_of_adma_workaround,
566 .set_bus_width = esdhc_pltfm_set_bus_width,
567 .reset = esdhc_reset,
568 .set_uhs_signaling = sdhci_set_uhs_signaling,
569};
570
571static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
572 .quirks = ESDHC_DEFAULT_QUIRKS |
573#ifdef CONFIG_PPC
574 SDHCI_QUIRK_BROKEN_CARD_DETECTION |
575#endif
576 SDHCI_QUIRK_NO_CARD_NO_RESET |
577 SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
578 .ops = &sdhci_esdhc_be_ops,
579};
580
581static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
582 .quirks = ESDHC_DEFAULT_QUIRKS |
583 SDHCI_QUIRK_NO_CARD_NO_RESET |
584 SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
585 .ops = &sdhci_esdhc_le_ops,
586};
587
588static struct soc_device_attribute soc_incorrect_hostver[] = {
589 { .family = "QorIQ T4240", .revision = "1.0", },
590 { .family = "QorIQ T4240", .revision = "2.0", },
591 { },
592};
593
594static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
595{
596 struct sdhci_pltfm_host *pltfm_host;
597 struct sdhci_esdhc *esdhc;
598 u16 host_ver;
599
600 pltfm_host = sdhci_priv(host);
601 esdhc = sdhci_pltfm_priv(pltfm_host);
602
603 host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
604 esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
605 SDHCI_VENDOR_VER_SHIFT;
606 esdhc->spec_ver = host_ver & SDHCI_SPEC_VER_MASK;
607 if (soc_device_match(soc_incorrect_hostver))
608 esdhc->quirk_incorrect_hostver = true;
609 else
610 esdhc->quirk_incorrect_hostver = false;
611}
612
613static int sdhci_esdhc_probe(struct platform_device *pdev)
614{
615 struct sdhci_host *host;
616 struct device_node *np;
617 struct sdhci_pltfm_host *pltfm_host;
618 struct sdhci_esdhc *esdhc;
619 int ret;
620
621 np = pdev->dev.of_node;
622
623 if (of_property_read_bool(np, "little-endian"))
624 host = sdhci_pltfm_init(pdev, &sdhci_esdhc_le_pdata,
625 sizeof(struct sdhci_esdhc));
626 else
627 host = sdhci_pltfm_init(pdev, &sdhci_esdhc_be_pdata,
628 sizeof(struct sdhci_esdhc));
629
630 if (IS_ERR(host))
631 return PTR_ERR(host);
632
633 esdhc_init(pdev, host);
634
635 sdhci_get_of_property(pdev);
636
637 pltfm_host = sdhci_priv(host);
638 esdhc = sdhci_pltfm_priv(pltfm_host);
639 if (esdhc->vendor_ver == VENDOR_V_22)
640 host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
641
642 if (esdhc->vendor_ver > VENDOR_V_22)
643 host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
644
645 if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
646 of_device_is_compatible(np, "fsl,p5020-esdhc") ||
647 of_device_is_compatible(np, "fsl,p4080-esdhc") ||
648 of_device_is_compatible(np, "fsl,p1020-esdhc") ||
649 of_device_is_compatible(np, "fsl,t1040-esdhc"))
650 host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
651
652 if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
653 host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
654
655 if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
656 /*
657 * Freescale messed up with P2020 as it has a non-standard
658 * host control register
659 */
660 host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
661 }
662
663 /* call to generic mmc_of_parse to support additional capabilities */
664 ret = mmc_of_parse(host->mmc);
665 if (ret)
666 goto err;
667
668 mmc_of_parse_voltage(np, &host->ocr_mask);
669
670 ret = sdhci_add_host(host);
671 if (ret)
672 goto err;
673
674 return 0;
675 err:
676 sdhci_pltfm_free(pdev);
677 return ret;
678}
679
680static const struct of_device_id sdhci_esdhc_of_match[] = {
681 { .compatible = "fsl,mpc8379-esdhc" },
682 { .compatible = "fsl,mpc8536-esdhc" },
683 { .compatible = "fsl,esdhc" },
684 { }
685};
686MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
687
688static struct platform_driver sdhci_esdhc_driver = {
689 .driver = {
690 .name = "sdhci-esdhc",
691 .of_match_table = sdhci_esdhc_of_match,
692 .pm = &esdhc_of_dev_pm_ops,
693 },
694 .probe = sdhci_esdhc_probe,
695 .remove = sdhci_pltfm_unregister,
696};
697
698module_platform_driver(sdhci_esdhc_driver);
699
700MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
701MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
702 "Anton Vorontsov <avorontsov@ru.mvista.com>");
703MODULE_LICENSE("GPL v2");