Loading...
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h> /* needed for in_interrupt() proto */
61#include <linux/dma-mapping.h>
62#include <linux/kthread.h>
63#include <scsi/scsi_host.h>
64
65#include "mptbase.h"
66#include "lsi/mpi_log_fc.h"
67
68/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69#define my_NAME "Fusion MPT base driver"
70#define my_VERSION MPT_LINUX_VERSION_COMMON
71#define MYNAM "mptbase"
72
73MODULE_AUTHOR(MODULEAUTHOR);
74MODULE_DESCRIPTION(my_NAME);
75MODULE_LICENSE("GPL");
76MODULE_VERSION(my_VERSION);
77
78/*
79 * cmd line parameters
80 */
81
82static int mpt_msi_enable_spi;
83module_param(mpt_msi_enable_spi, int, 0);
84MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87static int mpt_msi_enable_fc;
88module_param(mpt_msi_enable_fc, int, 0);
89MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92static int mpt_msi_enable_sas;
93module_param(mpt_msi_enable_sas, int, 0);
94MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97static int mpt_channel_mapping;
98module_param(mpt_channel_mapping, int, 0);
99MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101static int mpt_debug_level;
102static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
103module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108int mpt_fwfault_debug;
109EXPORT_SYMBOL(mpt_fwfault_debug);
110module_param(mpt_fwfault_debug, int, 0600);
111MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117#ifdef MFCNT
118static int mfcounter = 0;
119#define PRINT_MF_COUNT 20000
120#endif
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * Public data...
125 */
126
127#define WHOINIT_UNKNOWN 0xAA
128
129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130/*
131 * Private data...
132 */
133 /* Adapter link list */
134LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145#ifdef CONFIG_PROC_FS
146static struct proc_dir_entry *mpt_proc_root_dir;
147#endif
148
149/*
150 * Driver Callback Index's
151 */
152static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153static u8 last_drv_idx;
154
155/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156/*
157 * Forward protos...
158 */
159static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181static int PrimeIocFifos(MPT_ADAPTER *ioc);
182static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185static int GetLanConfigPages(MPT_ADAPTER *ioc);
186static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199#ifdef CONFIG_PROC_FS
200static const struct file_operations mpt_summary_proc_fops;
201static const struct file_operations mpt_version_proc_fops;
202static const struct file_operations mpt_iocinfo_proc_fops;
203#endif
204static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215/* module entry point */
216static int __init fusion_init (void);
217static void __exit fusion_exit (void);
218
219#define CHIPREG_READ32(addr) readl_relaxed(addr)
220#define CHIPREG_READ32_dmasync(addr) readl(addr)
221#define CHIPREG_WRITE32(addr,val) writel(val, addr)
222#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225static void
226pci_disable_io_access(struct pci_dev *pdev)
227{
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233}
234
235static void
236pci_enable_io_access(struct pci_dev *pdev)
237{
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243}
244
245static int mpt_set_debug_level(const char *val, struct kernel_param *kp)
246{
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256}
257
258/**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264static u8
265mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266{
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273}
274
275/**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281static int
282mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283{
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
304 &dma_handle);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
320 buffer, dma_handle);
321 out:
322 return rc;
323}
324
325
326/**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
333static int mpt_remove_dead_ioc_func(void *arg)
334{
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if ((ioc == NULL))
339 return -1;
340
341 pdev = ioc->pcidev;
342 if ((pdev == NULL))
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347}
348
349
350
351/**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355**/
356static void
357mpt_fault_reset_work(struct work_struct *work)
358{
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436}
437
438
439/*
440 * Process turbo (context) reply...
441 */
442static void
443mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444{
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 break;
477 }
478 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
479 break;
480 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
481 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
483 break;
484 default:
485 cb_idx = 0;
486 BUG();
487 }
488
489 /* Check for (valid) IO callback! */
490 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
491 MptCallbacks[cb_idx] == NULL) {
492 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
493 __func__, ioc->name, cb_idx);
494 goto out;
495 }
496
497 if (MptCallbacks[cb_idx](ioc, mf, mr))
498 mpt_free_msg_frame(ioc, mf);
499 out:
500 mb();
501}
502
503static void
504mpt_reply(MPT_ADAPTER *ioc, u32 pa)
505{
506 MPT_FRAME_HDR *mf;
507 MPT_FRAME_HDR *mr;
508 u16 req_idx;
509 u8 cb_idx;
510 int freeme;
511
512 u32 reply_dma_low;
513 u16 ioc_stat;
514
515 /* non-TURBO reply! Hmmm, something may be up...
516 * Newest turbo reply mechanism; get address
517 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
518 */
519
520 /* Map DMA address of reply header to cpu address.
521 * pa is 32 bits - but the dma address may be 32 or 64 bits
522 * get offset based only only the low addresses
523 */
524
525 reply_dma_low = (pa <<= 1);
526 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
527 (reply_dma_low - ioc->reply_frames_low_dma));
528
529 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
530 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
531 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
532
533 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
534 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
535 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
536
537 /* Check/log IOC log info
538 */
539 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
540 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
541 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
542 if (ioc->bus_type == FC)
543 mpt_fc_log_info(ioc, log_info);
544 else if (ioc->bus_type == SPI)
545 mpt_spi_log_info(ioc, log_info);
546 else if (ioc->bus_type == SAS)
547 mpt_sas_log_info(ioc, log_info, cb_idx);
548 }
549
550 if (ioc_stat & MPI_IOCSTATUS_MASK)
551 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
552
553 /* Check for (valid) IO callback! */
554 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
555 MptCallbacks[cb_idx] == NULL) {
556 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
557 __func__, ioc->name, cb_idx);
558 freeme = 0;
559 goto out;
560 }
561
562 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
563
564 out:
565 /* Flush (non-TURBO) reply with a WRITE! */
566 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
567
568 if (freeme)
569 mpt_free_msg_frame(ioc, mf);
570 mb();
571}
572
573/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
574/**
575 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
576 * @irq: irq number (not used)
577 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
578 *
579 * This routine is registered via the request_irq() kernel API call,
580 * and handles all interrupts generated from a specific MPT adapter
581 * (also referred to as a IO Controller or IOC).
582 * This routine must clear the interrupt from the adapter and does
583 * so by reading the reply FIFO. Multiple replies may be processed
584 * per single call to this routine.
585 *
586 * This routine handles register-level access of the adapter but
587 * dispatches (calls) a protocol-specific callback routine to handle
588 * the protocol-specific details of the MPT request completion.
589 */
590static irqreturn_t
591mpt_interrupt(int irq, void *bus_id)
592{
593 MPT_ADAPTER *ioc = bus_id;
594 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
595
596 if (pa == 0xFFFFFFFF)
597 return IRQ_NONE;
598
599 /*
600 * Drain the reply FIFO!
601 */
602 do {
603 if (pa & MPI_ADDRESS_REPLY_A_BIT)
604 mpt_reply(ioc, pa);
605 else
606 mpt_turbo_reply(ioc, pa);
607 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
608 } while (pa != 0xFFFFFFFF);
609
610 return IRQ_HANDLED;
611}
612
613/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
614/**
615 * mptbase_reply - MPT base driver's callback routine
616 * @ioc: Pointer to MPT_ADAPTER structure
617 * @req: Pointer to original MPT request frame
618 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
619 *
620 * MPT base driver's callback routine; all base driver
621 * "internal" request/reply processing is routed here.
622 * Currently used for EventNotification and EventAck handling.
623 *
624 * Returns 1 indicating original alloc'd request frame ptr
625 * should be freed, or 0 if it shouldn't.
626 */
627static int
628mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
629{
630 EventNotificationReply_t *pEventReply;
631 u8 event;
632 int evHandlers;
633 int freereq = 1;
634
635 switch (reply->u.hdr.Function) {
636 case MPI_FUNCTION_EVENT_NOTIFICATION:
637 pEventReply = (EventNotificationReply_t *)reply;
638 evHandlers = 0;
639 ProcessEventNotification(ioc, pEventReply, &evHandlers);
640 event = le32_to_cpu(pEventReply->Event) & 0xFF;
641 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
642 freereq = 0;
643 if (event != MPI_EVENT_EVENT_CHANGE)
644 break;
645 case MPI_FUNCTION_CONFIG:
646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
649 memcpy(ioc->mptbase_cmds.reply, reply,
650 min(MPT_DEFAULT_FRAME_SIZE,
651 4 * reply->u.reply.MsgLength));
652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
654 complete(&ioc->mptbase_cmds.done);
655 } else
656 freereq = 0;
657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
658 freereq = 1;
659 break;
660 case MPI_FUNCTION_EVENT_ACK:
661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
662 "EventAck reply received\n", ioc->name));
663 break;
664 default:
665 printk(MYIOC_s_ERR_FMT
666 "Unexpected msg function (=%02Xh) reply received!\n",
667 ioc->name, reply->u.hdr.Function);
668 break;
669 }
670
671 /*
672 * Conditionally tell caller to free the original
673 * EventNotification/EventAck/unexpected request frame!
674 */
675 return freereq;
676}
677
678/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
679/**
680 * mpt_register - Register protocol-specific main callback handler.
681 * @cbfunc: callback function pointer
682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
683 * @func_name: call function's name
684 *
685 * This routine is called by a protocol-specific driver (SCSI host,
686 * LAN, SCSI target) to register its reply callback routine. Each
687 * protocol-specific driver must do this before it will be able to
688 * use any IOC resources, such as obtaining request frames.
689 *
690 * NOTES: The SCSI protocol driver currently calls this routine thrice
691 * in order to register separate callbacks; one for "normal" SCSI IO;
692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
693 *
694 * Returns u8 valued "handle" in the range (and S.O.D. order)
695 * {N,...,7,6,5,...,1} if successful.
696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
697 * considered an error by the caller.
698 */
699u8
700mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
701{
702 u8 cb_idx;
703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
704
705 /*
706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
707 * (slot/handle 0 is reserved!)
708 */
709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
710 if (MptCallbacks[cb_idx] == NULL) {
711 MptCallbacks[cb_idx] = cbfunc;
712 MptDriverClass[cb_idx] = dclass;
713 MptEvHandlers[cb_idx] = NULL;
714 last_drv_idx = cb_idx;
715 strlcpy(MptCallbacksName[cb_idx], func_name,
716 MPT_MAX_CALLBACKNAME_LEN+1);
717 break;
718 }
719 }
720
721 return last_drv_idx;
722}
723
724/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
725/**
726 * mpt_deregister - Deregister a protocol drivers resources.
727 * @cb_idx: previously registered callback handle
728 *
729 * Each protocol-specific driver should call this routine when its
730 * module is unloaded.
731 */
732void
733mpt_deregister(u8 cb_idx)
734{
735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
736 MptCallbacks[cb_idx] = NULL;
737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
738 MptEvHandlers[cb_idx] = NULL;
739
740 last_drv_idx++;
741 }
742}
743
744/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
745/**
746 * mpt_event_register - Register protocol-specific event callback handler.
747 * @cb_idx: previously registered (via mpt_register) callback handle
748 * @ev_cbfunc: callback function
749 *
750 * This routine can be called by one or more protocol-specific drivers
751 * if/when they choose to be notified of MPT events.
752 *
753 * Returns 0 for success.
754 */
755int
756mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
757{
758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
759 return -1;
760
761 MptEvHandlers[cb_idx] = ev_cbfunc;
762 return 0;
763}
764
765/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
766/**
767 * mpt_event_deregister - Deregister protocol-specific event callback handler
768 * @cb_idx: previously registered callback handle
769 *
770 * Each protocol-specific driver should call this routine
771 * when it does not (or can no longer) handle events,
772 * or when its module is unloaded.
773 */
774void
775mpt_event_deregister(u8 cb_idx)
776{
777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
778 return;
779
780 MptEvHandlers[cb_idx] = NULL;
781}
782
783/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
784/**
785 * mpt_reset_register - Register protocol-specific IOC reset handler.
786 * @cb_idx: previously registered (via mpt_register) callback handle
787 * @reset_func: reset function
788 *
789 * This routine can be called by one or more protocol-specific drivers
790 * if/when they choose to be notified of IOC resets.
791 *
792 * Returns 0 for success.
793 */
794int
795mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
796{
797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
798 return -1;
799
800 MptResetHandlers[cb_idx] = reset_func;
801 return 0;
802}
803
804/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
805/**
806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
807 * @cb_idx: previously registered callback handle
808 *
809 * Each protocol-specific driver should call this routine
810 * when it does not (or can no longer) handle IOC reset handling,
811 * or when its module is unloaded.
812 */
813void
814mpt_reset_deregister(u8 cb_idx)
815{
816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
817 return;
818
819 MptResetHandlers[cb_idx] = NULL;
820}
821
822/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
823/**
824 * mpt_device_driver_register - Register device driver hooks
825 * @dd_cbfunc: driver callbacks struct
826 * @cb_idx: MPT protocol driver index
827 */
828int
829mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
830{
831 MPT_ADAPTER *ioc;
832 const struct pci_device_id *id;
833
834 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
835 return -EINVAL;
836
837 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
838
839 /* call per pci device probe entry point */
840 list_for_each_entry(ioc, &ioc_list, list) {
841 id = ioc->pcidev->driver ?
842 ioc->pcidev->driver->id_table : NULL;
843 if (dd_cbfunc->probe)
844 dd_cbfunc->probe(ioc->pcidev, id);
845 }
846
847 return 0;
848}
849
850/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
851/**
852 * mpt_device_driver_deregister - DeRegister device driver hooks
853 * @cb_idx: MPT protocol driver index
854 */
855void
856mpt_device_driver_deregister(u8 cb_idx)
857{
858 struct mpt_pci_driver *dd_cbfunc;
859 MPT_ADAPTER *ioc;
860
861 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
862 return;
863
864 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
865
866 list_for_each_entry(ioc, &ioc_list, list) {
867 if (dd_cbfunc->remove)
868 dd_cbfunc->remove(ioc->pcidev);
869 }
870
871 MptDeviceDriverHandlers[cb_idx] = NULL;
872}
873
874
875/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
876/**
877 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
878 * @cb_idx: Handle of registered MPT protocol driver
879 * @ioc: Pointer to MPT adapter structure
880 *
881 * Obtain an MPT request frame from the pool (of 1024) that are
882 * allocated per MPT adapter.
883 *
884 * Returns pointer to a MPT request frame or %NULL if none are available
885 * or IOC is not active.
886 */
887MPT_FRAME_HDR*
888mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
889{
890 MPT_FRAME_HDR *mf;
891 unsigned long flags;
892 u16 req_idx; /* Request index */
893
894 /* validate handle and ioc identifier */
895
896#ifdef MFCNT
897 if (!ioc->active)
898 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
899 "returning NULL!\n", ioc->name);
900#endif
901
902 /* If interrupts are not attached, do not return a request frame */
903 if (!ioc->active)
904 return NULL;
905
906 spin_lock_irqsave(&ioc->FreeQlock, flags);
907 if (!list_empty(&ioc->FreeQ)) {
908 int req_offset;
909
910 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
911 u.frame.linkage.list);
912 list_del(&mf->u.frame.linkage.list);
913 mf->u.frame.linkage.arg1 = 0;
914 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
915 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
916 /* u16! */
917 req_idx = req_offset / ioc->req_sz;
918 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
919 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
920 /* Default, will be changed if necessary in SG generation */
921 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
922#ifdef MFCNT
923 ioc->mfcnt++;
924#endif
925 }
926 else
927 mf = NULL;
928 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
929
930#ifdef MFCNT
931 if (mf == NULL)
932 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
933 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
934 ioc->req_depth);
935 mfcounter++;
936 if (mfcounter == PRINT_MF_COUNT)
937 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
938 ioc->mfcnt, ioc->req_depth);
939#endif
940
941 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
942 ioc->name, cb_idx, ioc->id, mf));
943 return mf;
944}
945
946/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
947/**
948 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
949 * @cb_idx: Handle of registered MPT protocol driver
950 * @ioc: Pointer to MPT adapter structure
951 * @mf: Pointer to MPT request frame
952 *
953 * This routine posts an MPT request frame to the request post FIFO of a
954 * specific MPT adapter.
955 */
956void
957mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
958{
959 u32 mf_dma_addr;
960 int req_offset;
961 u16 req_idx; /* Request index */
962
963 /* ensure values are reset properly! */
964 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
965 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
966 /* u16! */
967 req_idx = req_offset / ioc->req_sz;
968 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
969 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
970
971 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
972
973 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
974 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
975 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
976 ioc->RequestNB[req_idx]));
977 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
978}
979
980/**
981 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
982 * @cb_idx: Handle of registered MPT protocol driver
983 * @ioc: Pointer to MPT adapter structure
984 * @mf: Pointer to MPT request frame
985 *
986 * Send a protocol-specific MPT request frame to an IOC using
987 * hi-priority request queue.
988 *
989 * This routine posts an MPT request frame to the request post FIFO of a
990 * specific MPT adapter.
991 **/
992void
993mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
994{
995 u32 mf_dma_addr;
996 int req_offset;
997 u16 req_idx; /* Request index */
998
999 /* ensure values are reset properly! */
1000 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1001 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1002 req_idx = req_offset / ioc->req_sz;
1003 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1004 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1005
1006 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1007
1008 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1009 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1010 ioc->name, mf_dma_addr, req_idx));
1011 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1012}
1013
1014/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1015/**
1016 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1017 * @ioc: Pointer to MPT adapter structure
1018 * @mf: Pointer to MPT request frame
1019 *
1020 * This routine places a MPT request frame back on the MPT adapter's
1021 * FreeQ.
1022 */
1023void
1024mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1025{
1026 unsigned long flags;
1027
1028 /* Put Request back on FreeQ! */
1029 spin_lock_irqsave(&ioc->FreeQlock, flags);
1030 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1031 goto out;
1032 /* signature to know if this mf is freed */
1033 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1034 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1035#ifdef MFCNT
1036 ioc->mfcnt--;
1037#endif
1038 out:
1039 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1040}
1041
1042/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1043/**
1044 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1045 * @pAddr: virtual address for SGE
1046 * @flagslength: SGE flags and data transfer length
1047 * @dma_addr: Physical address
1048 *
1049 * This routine places a MPT request frame back on the MPT adapter's
1050 * FreeQ.
1051 */
1052static void
1053mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1054{
1055 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1056 pSge->FlagsLength = cpu_to_le32(flagslength);
1057 pSge->Address = cpu_to_le32(dma_addr);
1058}
1059
1060/**
1061 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1062 * @pAddr: virtual address for SGE
1063 * @flagslength: SGE flags and data transfer length
1064 * @dma_addr: Physical address
1065 *
1066 * This routine places a MPT request frame back on the MPT adapter's
1067 * FreeQ.
1068 **/
1069static void
1070mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1071{
1072 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1073 pSge->Address.Low = cpu_to_le32
1074 (lower_32_bits(dma_addr));
1075 pSge->Address.High = cpu_to_le32
1076 (upper_32_bits(dma_addr));
1077 pSge->FlagsLength = cpu_to_le32
1078 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1079}
1080
1081/**
1082 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1083 * @pAddr: virtual address for SGE
1084 * @flagslength: SGE flags and data transfer length
1085 * @dma_addr: Physical address
1086 *
1087 * This routine places a MPT request frame back on the MPT adapter's
1088 * FreeQ.
1089 **/
1090static void
1091mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1092{
1093 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1094 u32 tmp;
1095
1096 pSge->Address.Low = cpu_to_le32
1097 (lower_32_bits(dma_addr));
1098 tmp = (u32)(upper_32_bits(dma_addr));
1099
1100 /*
1101 * 1078 errata workaround for the 36GB limitation
1102 */
1103 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1104 flagslength |=
1105 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1106 tmp |= (1<<31);
1107 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1108 printk(KERN_DEBUG "1078 P0M2 addressing for "
1109 "addr = 0x%llx len = %d\n",
1110 (unsigned long long)dma_addr,
1111 MPI_SGE_LENGTH(flagslength));
1112 }
1113
1114 pSge->Address.High = cpu_to_le32(tmp);
1115 pSge->FlagsLength = cpu_to_le32(
1116 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1117}
1118
1119/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1120/**
1121 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1122 * @pAddr: virtual address for SGE
1123 * @next: nextChainOffset value (u32's)
1124 * @length: length of next SGL segment
1125 * @dma_addr: Physical address
1126 *
1127 */
1128static void
1129mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1130{
1131 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1132 pChain->Length = cpu_to_le16(length);
1133 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1134 pChain->NextChainOffset = next;
1135 pChain->Address = cpu_to_le32(dma_addr);
1136}
1137
1138/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1139/**
1140 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1141 * @pAddr: virtual address for SGE
1142 * @next: nextChainOffset value (u32's)
1143 * @length: length of next SGL segment
1144 * @dma_addr: Physical address
1145 *
1146 */
1147static void
1148mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1149{
1150 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1151 u32 tmp = dma_addr & 0xFFFFFFFF;
1152
1153 pChain->Length = cpu_to_le16(length);
1154 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1155 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1156
1157 pChain->NextChainOffset = next;
1158
1159 pChain->Address.Low = cpu_to_le32(tmp);
1160 tmp = (u32)(upper_32_bits(dma_addr));
1161 pChain->Address.High = cpu_to_le32(tmp);
1162}
1163
1164/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1165/**
1166 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1167 * @cb_idx: Handle of registered MPT protocol driver
1168 * @ioc: Pointer to MPT adapter structure
1169 * @reqBytes: Size of the request in bytes
1170 * @req: Pointer to MPT request frame
1171 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1172 *
1173 * This routine is used exclusively to send MptScsiTaskMgmt
1174 * requests since they are required to be sent via doorbell handshake.
1175 *
1176 * NOTE: It is the callers responsibility to byte-swap fields in the
1177 * request which are greater than 1 byte in size.
1178 *
1179 * Returns 0 for success, non-zero for failure.
1180 */
1181int
1182mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1183{
1184 int r = 0;
1185 u8 *req_as_bytes;
1186 int ii;
1187
1188 /* State is known to be good upon entering
1189 * this function so issue the bus reset
1190 * request.
1191 */
1192
1193 /*
1194 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1195 * setting cb_idx/req_idx. But ONLY if this request
1196 * is in proper (pre-alloc'd) request buffer range...
1197 */
1198 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1199 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1200 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1201 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1202 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1203 }
1204
1205 /* Make sure there are no doorbells */
1206 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1207
1208 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1209 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1210 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1211
1212 /* Wait for IOC doorbell int */
1213 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1214 return ii;
1215 }
1216
1217 /* Read doorbell and check for active bit */
1218 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1219 return -5;
1220
1221 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1222 ioc->name, ii));
1223
1224 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1225
1226 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1227 return -2;
1228 }
1229
1230 /* Send request via doorbell handshake */
1231 req_as_bytes = (u8 *) req;
1232 for (ii = 0; ii < reqBytes/4; ii++) {
1233 u32 word;
1234
1235 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1236 (req_as_bytes[(ii*4) + 1] << 8) |
1237 (req_as_bytes[(ii*4) + 2] << 16) |
1238 (req_as_bytes[(ii*4) + 3] << 24));
1239 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1240 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1241 r = -3;
1242 break;
1243 }
1244 }
1245
1246 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1247 r = 0;
1248 else
1249 r = -4;
1250
1251 /* Make sure there are no doorbells */
1252 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1253
1254 return r;
1255}
1256
1257/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1258/**
1259 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1260 * @ioc: Pointer to MPT adapter structure
1261 * @access_control_value: define bits below
1262 * @sleepFlag: Specifies whether the process can sleep
1263 *
1264 * Provides mechanism for the host driver to control the IOC's
1265 * Host Page Buffer access.
1266 *
1267 * Access Control Value - bits[15:12]
1268 * 0h Reserved
1269 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1270 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1271 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1272 *
1273 * Returns 0 for success, non-zero for failure.
1274 */
1275
1276static int
1277mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1278{
1279 int r = 0;
1280
1281 /* return if in use */
1282 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1283 & MPI_DOORBELL_ACTIVE)
1284 return -1;
1285
1286 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1287
1288 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1289 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1290 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1291 (access_control_value<<12)));
1292
1293 /* Wait for IOC to clear Doorbell Status bit */
1294 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1295 return -2;
1296 }else
1297 return 0;
1298}
1299
1300/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1301/**
1302 * mpt_host_page_alloc - allocate system memory for the fw
1303 * @ioc: Pointer to pointer to IOC adapter
1304 * @ioc_init: Pointer to ioc init config page
1305 *
1306 * If we already allocated memory in past, then resend the same pointer.
1307 * Returns 0 for success, non-zero for failure.
1308 */
1309static int
1310mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1311{
1312 char *psge;
1313 int flags_length;
1314 u32 host_page_buffer_sz=0;
1315
1316 if(!ioc->HostPageBuffer) {
1317
1318 host_page_buffer_sz =
1319 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1320
1321 if(!host_page_buffer_sz)
1322 return 0; /* fw doesn't need any host buffers */
1323
1324 /* spin till we get enough memory */
1325 while(host_page_buffer_sz > 0) {
1326
1327 if((ioc->HostPageBuffer = pci_alloc_consistent(
1328 ioc->pcidev,
1329 host_page_buffer_sz,
1330 &ioc->HostPageBuffer_dma)) != NULL) {
1331
1332 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1333 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1334 ioc->name, ioc->HostPageBuffer,
1335 (u32)ioc->HostPageBuffer_dma,
1336 host_page_buffer_sz));
1337 ioc->alloc_total += host_page_buffer_sz;
1338 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1339 break;
1340 }
1341
1342 host_page_buffer_sz -= (4*1024);
1343 }
1344 }
1345
1346 if(!ioc->HostPageBuffer) {
1347 printk(MYIOC_s_ERR_FMT
1348 "Failed to alloc memory for host_page_buffer!\n",
1349 ioc->name);
1350 return -999;
1351 }
1352
1353 psge = (char *)&ioc_init->HostPageBufferSGE;
1354 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1355 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1356 MPI_SGE_FLAGS_HOST_TO_IOC |
1357 MPI_SGE_FLAGS_END_OF_BUFFER;
1358 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1359 flags_length |= ioc->HostPageBuffer_sz;
1360 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1361 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1362
1363return 0;
1364}
1365
1366/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1367/**
1368 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1369 * @iocid: IOC unique identifier (integer)
1370 * @iocpp: Pointer to pointer to IOC adapter
1371 *
1372 * Given a unique IOC identifier, set pointer to the associated MPT
1373 * adapter structure.
1374 *
1375 * Returns iocid and sets iocpp if iocid is found.
1376 * Returns -1 if iocid is not found.
1377 */
1378int
1379mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1380{
1381 MPT_ADAPTER *ioc;
1382
1383 list_for_each_entry(ioc,&ioc_list,list) {
1384 if (ioc->id == iocid) {
1385 *iocpp =ioc;
1386 return iocid;
1387 }
1388 }
1389
1390 *iocpp = NULL;
1391 return -1;
1392}
1393
1394/**
1395 * mpt_get_product_name - returns product string
1396 * @vendor: pci vendor id
1397 * @device: pci device id
1398 * @revision: pci revision id
1399 *
1400 * Returns product string displayed when driver loads,
1401 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1402 *
1403 **/
1404static const char*
1405mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1406{
1407 char *product_str = NULL;
1408
1409 if (vendor == PCI_VENDOR_ID_BROCADE) {
1410 switch (device)
1411 {
1412 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1413 switch (revision)
1414 {
1415 case 0x00:
1416 product_str = "BRE040 A0";
1417 break;
1418 case 0x01:
1419 product_str = "BRE040 A1";
1420 break;
1421 default:
1422 product_str = "BRE040";
1423 break;
1424 }
1425 break;
1426 }
1427 goto out;
1428 }
1429
1430 switch (device)
1431 {
1432 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1433 product_str = "LSIFC909 B1";
1434 break;
1435 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1436 product_str = "LSIFC919 B0";
1437 break;
1438 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1439 product_str = "LSIFC929 B0";
1440 break;
1441 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1442 if (revision < 0x80)
1443 product_str = "LSIFC919X A0";
1444 else
1445 product_str = "LSIFC919XL A1";
1446 break;
1447 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1448 if (revision < 0x80)
1449 product_str = "LSIFC929X A0";
1450 else
1451 product_str = "LSIFC929XL A1";
1452 break;
1453 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1454 product_str = "LSIFC939X A1";
1455 break;
1456 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1457 product_str = "LSIFC949X A1";
1458 break;
1459 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1460 switch (revision)
1461 {
1462 case 0x00:
1463 product_str = "LSIFC949E A0";
1464 break;
1465 case 0x01:
1466 product_str = "LSIFC949E A1";
1467 break;
1468 default:
1469 product_str = "LSIFC949E";
1470 break;
1471 }
1472 break;
1473 case MPI_MANUFACTPAGE_DEVID_53C1030:
1474 switch (revision)
1475 {
1476 case 0x00:
1477 product_str = "LSI53C1030 A0";
1478 break;
1479 case 0x01:
1480 product_str = "LSI53C1030 B0";
1481 break;
1482 case 0x03:
1483 product_str = "LSI53C1030 B1";
1484 break;
1485 case 0x07:
1486 product_str = "LSI53C1030 B2";
1487 break;
1488 case 0x08:
1489 product_str = "LSI53C1030 C0";
1490 break;
1491 case 0x80:
1492 product_str = "LSI53C1030T A0";
1493 break;
1494 case 0x83:
1495 product_str = "LSI53C1030T A2";
1496 break;
1497 case 0x87:
1498 product_str = "LSI53C1030T A3";
1499 break;
1500 case 0xc1:
1501 product_str = "LSI53C1020A A1";
1502 break;
1503 default:
1504 product_str = "LSI53C1030";
1505 break;
1506 }
1507 break;
1508 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1509 switch (revision)
1510 {
1511 case 0x03:
1512 product_str = "LSI53C1035 A2";
1513 break;
1514 case 0x04:
1515 product_str = "LSI53C1035 B0";
1516 break;
1517 default:
1518 product_str = "LSI53C1035";
1519 break;
1520 }
1521 break;
1522 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1523 switch (revision)
1524 {
1525 case 0x00:
1526 product_str = "LSISAS1064 A1";
1527 break;
1528 case 0x01:
1529 product_str = "LSISAS1064 A2";
1530 break;
1531 case 0x02:
1532 product_str = "LSISAS1064 A3";
1533 break;
1534 case 0x03:
1535 product_str = "LSISAS1064 A4";
1536 break;
1537 default:
1538 product_str = "LSISAS1064";
1539 break;
1540 }
1541 break;
1542 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1543 switch (revision)
1544 {
1545 case 0x00:
1546 product_str = "LSISAS1064E A0";
1547 break;
1548 case 0x01:
1549 product_str = "LSISAS1064E B0";
1550 break;
1551 case 0x02:
1552 product_str = "LSISAS1064E B1";
1553 break;
1554 case 0x04:
1555 product_str = "LSISAS1064E B2";
1556 break;
1557 case 0x08:
1558 product_str = "LSISAS1064E B3";
1559 break;
1560 default:
1561 product_str = "LSISAS1064E";
1562 break;
1563 }
1564 break;
1565 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1566 switch (revision)
1567 {
1568 case 0x00:
1569 product_str = "LSISAS1068 A0";
1570 break;
1571 case 0x01:
1572 product_str = "LSISAS1068 B0";
1573 break;
1574 case 0x02:
1575 product_str = "LSISAS1068 B1";
1576 break;
1577 default:
1578 product_str = "LSISAS1068";
1579 break;
1580 }
1581 break;
1582 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1583 switch (revision)
1584 {
1585 case 0x00:
1586 product_str = "LSISAS1068E A0";
1587 break;
1588 case 0x01:
1589 product_str = "LSISAS1068E B0";
1590 break;
1591 case 0x02:
1592 product_str = "LSISAS1068E B1";
1593 break;
1594 case 0x04:
1595 product_str = "LSISAS1068E B2";
1596 break;
1597 case 0x08:
1598 product_str = "LSISAS1068E B3";
1599 break;
1600 default:
1601 product_str = "LSISAS1068E";
1602 break;
1603 }
1604 break;
1605 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1606 switch (revision)
1607 {
1608 case 0x00:
1609 product_str = "LSISAS1078 A0";
1610 break;
1611 case 0x01:
1612 product_str = "LSISAS1078 B0";
1613 break;
1614 case 0x02:
1615 product_str = "LSISAS1078 C0";
1616 break;
1617 case 0x03:
1618 product_str = "LSISAS1078 C1";
1619 break;
1620 case 0x04:
1621 product_str = "LSISAS1078 C2";
1622 break;
1623 default:
1624 product_str = "LSISAS1078";
1625 break;
1626 }
1627 break;
1628 }
1629
1630 out:
1631 return product_str;
1632}
1633
1634/**
1635 * mpt_mapresources - map in memory mapped io
1636 * @ioc: Pointer to pointer to IOC adapter
1637 *
1638 **/
1639static int
1640mpt_mapresources(MPT_ADAPTER *ioc)
1641{
1642 u8 __iomem *mem;
1643 int ii;
1644 resource_size_t mem_phys;
1645 unsigned long port;
1646 u32 msize;
1647 u32 psize;
1648 int r = -ENODEV;
1649 struct pci_dev *pdev;
1650
1651 pdev = ioc->pcidev;
1652 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1653 if (pci_enable_device_mem(pdev)) {
1654 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1655 "failed\n", ioc->name);
1656 return r;
1657 }
1658 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1659 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1660 "MEM failed\n", ioc->name);
1661 goto out_pci_disable_device;
1662 }
1663
1664 if (sizeof(dma_addr_t) > 4) {
1665 const uint64_t required_mask = dma_get_required_mask
1666 (&pdev->dev);
1667 if (required_mask > DMA_BIT_MASK(32)
1668 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1669 && !pci_set_consistent_dma_mask(pdev,
1670 DMA_BIT_MASK(64))) {
1671 ioc->dma_mask = DMA_BIT_MASK(64);
1672 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1673 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1674 ioc->name));
1675 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1676 && !pci_set_consistent_dma_mask(pdev,
1677 DMA_BIT_MASK(32))) {
1678 ioc->dma_mask = DMA_BIT_MASK(32);
1679 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1680 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1681 ioc->name));
1682 } else {
1683 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1684 ioc->name, pci_name(pdev));
1685 goto out_pci_release_region;
1686 }
1687 } else {
1688 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1689 && !pci_set_consistent_dma_mask(pdev,
1690 DMA_BIT_MASK(32))) {
1691 ioc->dma_mask = DMA_BIT_MASK(32);
1692 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1693 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1694 ioc->name));
1695 } else {
1696 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1697 ioc->name, pci_name(pdev));
1698 goto out_pci_release_region;
1699 }
1700 }
1701
1702 mem_phys = msize = 0;
1703 port = psize = 0;
1704 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1705 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1706 if (psize)
1707 continue;
1708 /* Get I/O space! */
1709 port = pci_resource_start(pdev, ii);
1710 psize = pci_resource_len(pdev, ii);
1711 } else {
1712 if (msize)
1713 continue;
1714 /* Get memmap */
1715 mem_phys = pci_resource_start(pdev, ii);
1716 msize = pci_resource_len(pdev, ii);
1717 }
1718 }
1719 ioc->mem_size = msize;
1720
1721 mem = NULL;
1722 /* Get logical ptr for PciMem0 space */
1723 /*mem = ioremap(mem_phys, msize);*/
1724 mem = ioremap(mem_phys, msize);
1725 if (mem == NULL) {
1726 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1727 " memory!\n", ioc->name);
1728 r = -EINVAL;
1729 goto out_pci_release_region;
1730 }
1731 ioc->memmap = mem;
1732 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1733 ioc->name, mem, (unsigned long long)mem_phys));
1734
1735 ioc->mem_phys = mem_phys;
1736 ioc->chip = (SYSIF_REGS __iomem *)mem;
1737
1738 /* Save Port IO values in case we need to do downloadboot */
1739 ioc->pio_mem_phys = port;
1740 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1741
1742 return 0;
1743
1744out_pci_release_region:
1745 pci_release_selected_regions(pdev, ioc->bars);
1746out_pci_disable_device:
1747 pci_disable_device(pdev);
1748 return r;
1749}
1750
1751/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1752/**
1753 * mpt_attach - Install a PCI intelligent MPT adapter.
1754 * @pdev: Pointer to pci_dev structure
1755 * @id: PCI device ID information
1756 *
1757 * This routine performs all the steps necessary to bring the IOC of
1758 * a MPT adapter to a OPERATIONAL state. This includes registering
1759 * memory regions, registering the interrupt, and allocating request
1760 * and reply memory pools.
1761 *
1762 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1763 * MPT adapter.
1764 *
1765 * Returns 0 for success, non-zero for failure.
1766 *
1767 * TODO: Add support for polled controllers
1768 */
1769int
1770mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1771{
1772 MPT_ADAPTER *ioc;
1773 u8 cb_idx;
1774 int r = -ENODEV;
1775 u8 pcixcmd;
1776 static int mpt_ids = 0;
1777#ifdef CONFIG_PROC_FS
1778 struct proc_dir_entry *dent;
1779#endif
1780
1781 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
1782 if (ioc == NULL) {
1783 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1784 return -ENOMEM;
1785 }
1786
1787 ioc->id = mpt_ids++;
1788 sprintf(ioc->name, "ioc%d", ioc->id);
1789 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1790
1791 /*
1792 * set initial debug level
1793 * (refer to mptdebug.h)
1794 *
1795 */
1796 ioc->debug_level = mpt_debug_level;
1797 if (mpt_debug_level)
1798 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1799
1800 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1801
1802 ioc->pcidev = pdev;
1803 if (mpt_mapresources(ioc)) {
1804 goto out_free_ioc;
1805 }
1806
1807 /*
1808 * Setting up proper handlers for scatter gather handling
1809 */
1810 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1811 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1812 ioc->add_sge = &mpt_add_sge_64bit_1078;
1813 else
1814 ioc->add_sge = &mpt_add_sge_64bit;
1815 ioc->add_chain = &mpt_add_chain_64bit;
1816 ioc->sg_addr_size = 8;
1817 } else {
1818 ioc->add_sge = &mpt_add_sge;
1819 ioc->add_chain = &mpt_add_chain;
1820 ioc->sg_addr_size = 4;
1821 }
1822 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1823
1824 ioc->alloc_total = sizeof(MPT_ADAPTER);
1825 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1826 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1827
1828
1829 spin_lock_init(&ioc->taskmgmt_lock);
1830 mutex_init(&ioc->internal_cmds.mutex);
1831 init_completion(&ioc->internal_cmds.done);
1832 mutex_init(&ioc->mptbase_cmds.mutex);
1833 init_completion(&ioc->mptbase_cmds.done);
1834 mutex_init(&ioc->taskmgmt_cmds.mutex);
1835 init_completion(&ioc->taskmgmt_cmds.done);
1836
1837 /* Initialize the event logging.
1838 */
1839 ioc->eventTypes = 0; /* None */
1840 ioc->eventContext = 0;
1841 ioc->eventLogSize = 0;
1842 ioc->events = NULL;
1843
1844#ifdef MFCNT
1845 ioc->mfcnt = 0;
1846#endif
1847
1848 ioc->sh = NULL;
1849 ioc->cached_fw = NULL;
1850
1851 /* Initialize SCSI Config Data structure
1852 */
1853 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1854
1855 /* Initialize the fc rport list head.
1856 */
1857 INIT_LIST_HEAD(&ioc->fc_rports);
1858
1859 /* Find lookup slot. */
1860 INIT_LIST_HEAD(&ioc->list);
1861
1862
1863 /* Initialize workqueue */
1864 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1865
1866 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1867 "mpt_poll_%d", ioc->id);
1868 ioc->reset_work_q =
1869 create_singlethread_workqueue(ioc->reset_work_q_name);
1870 if (!ioc->reset_work_q) {
1871 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1872 ioc->name);
1873 r = -ENOMEM;
1874 goto out_unmap_resources;
1875 }
1876
1877 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1878 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1879
1880 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1881 pdev->revision);
1882
1883 switch (pdev->device)
1884 {
1885 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1886 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1887 ioc->errata_flag_1064 = 1;
1888 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1889 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1890 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1891 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1892 ioc->bus_type = FC;
1893 break;
1894
1895 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1896 if (pdev->revision < XL_929) {
1897 /* 929X Chip Fix. Set Split transactions level
1898 * for PCIX. Set MOST bits to zero.
1899 */
1900 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1901 pcixcmd &= 0x8F;
1902 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1903 } else {
1904 /* 929XL Chip Fix. Set MMRBC to 0x08.
1905 */
1906 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1907 pcixcmd |= 0x08;
1908 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1909 }
1910 ioc->bus_type = FC;
1911 break;
1912
1913 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1914 /* 919X Chip Fix. Set Split transactions level
1915 * for PCIX. Set MOST bits to zero.
1916 */
1917 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1918 pcixcmd &= 0x8F;
1919 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1920 ioc->bus_type = FC;
1921 break;
1922
1923 case MPI_MANUFACTPAGE_DEVID_53C1030:
1924 /* 1030 Chip Fix. Disable Split transactions
1925 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1926 */
1927 if (pdev->revision < C0_1030) {
1928 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1929 pcixcmd &= 0x8F;
1930 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1931 }
1932
1933 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1934 ioc->bus_type = SPI;
1935 break;
1936
1937 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1938 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1939 ioc->errata_flag_1064 = 1;
1940 ioc->bus_type = SAS;
1941 break;
1942
1943 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1944 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1945 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1946 ioc->bus_type = SAS;
1947 break;
1948 }
1949
1950
1951 switch (ioc->bus_type) {
1952
1953 case SAS:
1954 ioc->msi_enable = mpt_msi_enable_sas;
1955 break;
1956
1957 case SPI:
1958 ioc->msi_enable = mpt_msi_enable_spi;
1959 break;
1960
1961 case FC:
1962 ioc->msi_enable = mpt_msi_enable_fc;
1963 break;
1964
1965 default:
1966 ioc->msi_enable = 0;
1967 break;
1968 }
1969
1970 ioc->fw_events_off = 1;
1971
1972 if (ioc->errata_flag_1064)
1973 pci_disable_io_access(pdev);
1974
1975 spin_lock_init(&ioc->FreeQlock);
1976
1977 /* Disable all! */
1978 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1979 ioc->active = 0;
1980 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1981
1982 /* Set IOC ptr in the pcidev's driver data. */
1983 pci_set_drvdata(ioc->pcidev, ioc);
1984
1985 /* Set lookup ptr. */
1986 list_add_tail(&ioc->list, &ioc_list);
1987
1988 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1989 */
1990 mpt_detect_bound_ports(ioc, pdev);
1991
1992 INIT_LIST_HEAD(&ioc->fw_event_list);
1993 spin_lock_init(&ioc->fw_event_lock);
1994 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1995 ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
1996 if (!ioc->fw_event_q) {
1997 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1998 ioc->name);
1999 r = -ENOMEM;
2000 goto out_remove_ioc;
2001 }
2002
2003 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2004 CAN_SLEEP)) != 0){
2005 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2006 ioc->name, r);
2007
2008 destroy_workqueue(ioc->fw_event_q);
2009 ioc->fw_event_q = NULL;
2010
2011 list_del(&ioc->list);
2012 if (ioc->alt_ioc)
2013 ioc->alt_ioc->alt_ioc = NULL;
2014 iounmap(ioc->memmap);
2015 if (pci_is_enabled(pdev))
2016 pci_disable_device(pdev);
2017 if (r != -5)
2018 pci_release_selected_regions(pdev, ioc->bars);
2019
2020 destroy_workqueue(ioc->reset_work_q);
2021 ioc->reset_work_q = NULL;
2022
2023 kfree(ioc);
2024 return r;
2025 }
2026
2027 /* call per device driver probe entry point */
2028 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2029 if(MptDeviceDriverHandlers[cb_idx] &&
2030 MptDeviceDriverHandlers[cb_idx]->probe) {
2031 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2032 }
2033 }
2034
2035#ifdef CONFIG_PROC_FS
2036 /*
2037 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2038 */
2039 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2040 if (dent) {
2041 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
2042 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
2043 }
2044#endif
2045
2046 if (!ioc->alt_ioc)
2047 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2048 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2049
2050 return 0;
2051
2052out_remove_ioc:
2053 list_del(&ioc->list);
2054 if (ioc->alt_ioc)
2055 ioc->alt_ioc->alt_ioc = NULL;
2056
2057 destroy_workqueue(ioc->reset_work_q);
2058 ioc->reset_work_q = NULL;
2059
2060out_unmap_resources:
2061 iounmap(ioc->memmap);
2062 pci_disable_device(pdev);
2063 pci_release_selected_regions(pdev, ioc->bars);
2064
2065out_free_ioc:
2066 kfree(ioc);
2067
2068 return r;
2069}
2070
2071/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2072/**
2073 * mpt_detach - Remove a PCI intelligent MPT adapter.
2074 * @pdev: Pointer to pci_dev structure
2075 */
2076
2077void
2078mpt_detach(struct pci_dev *pdev)
2079{
2080 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2081 char pname[32];
2082 u8 cb_idx;
2083 unsigned long flags;
2084 struct workqueue_struct *wq;
2085
2086 /*
2087 * Stop polling ioc for fault condition
2088 */
2089 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2090 wq = ioc->reset_work_q;
2091 ioc->reset_work_q = NULL;
2092 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2093 cancel_delayed_work(&ioc->fault_reset_work);
2094 destroy_workqueue(wq);
2095
2096 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2097 wq = ioc->fw_event_q;
2098 ioc->fw_event_q = NULL;
2099 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2100 destroy_workqueue(wq);
2101
2102 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2103 remove_proc_entry(pname, NULL);
2104 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2105 remove_proc_entry(pname, NULL);
2106 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2107 remove_proc_entry(pname, NULL);
2108
2109 /* call per device driver remove entry point */
2110 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2111 if(MptDeviceDriverHandlers[cb_idx] &&
2112 MptDeviceDriverHandlers[cb_idx]->remove) {
2113 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2114 }
2115 }
2116
2117 /* Disable interrupts! */
2118 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2119
2120 ioc->active = 0;
2121 synchronize_irq(pdev->irq);
2122
2123 /* Clear any lingering interrupt */
2124 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2125
2126 CHIPREG_READ32(&ioc->chip->IntStatus);
2127
2128 mpt_adapter_dispose(ioc);
2129
2130}
2131
2132/**************************************************************************
2133 * Power Management
2134 */
2135#ifdef CONFIG_PM
2136/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2137/**
2138 * mpt_suspend - Fusion MPT base driver suspend routine.
2139 * @pdev: Pointer to pci_dev structure
2140 * @state: new state to enter
2141 */
2142int
2143mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2144{
2145 u32 device_state;
2146 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2147
2148 device_state = pci_choose_state(pdev, state);
2149 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2150 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2151 device_state);
2152
2153 /* put ioc into READY_STATE */
2154 if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2155 printk(MYIOC_s_ERR_FMT
2156 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2157 }
2158
2159 /* disable interrupts */
2160 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2161 ioc->active = 0;
2162
2163 /* Clear any lingering interrupt */
2164 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2165
2166 free_irq(ioc->pci_irq, ioc);
2167 if (ioc->msi_enable)
2168 pci_disable_msi(ioc->pcidev);
2169 ioc->pci_irq = -1;
2170 pci_save_state(pdev);
2171 pci_disable_device(pdev);
2172 pci_release_selected_regions(pdev, ioc->bars);
2173 pci_set_power_state(pdev, device_state);
2174 return 0;
2175}
2176
2177/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2178/**
2179 * mpt_resume - Fusion MPT base driver resume routine.
2180 * @pdev: Pointer to pci_dev structure
2181 */
2182int
2183mpt_resume(struct pci_dev *pdev)
2184{
2185 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2186 u32 device_state = pdev->current_state;
2187 int recovery_state;
2188 int err;
2189
2190 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2191 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2192 device_state);
2193
2194 pci_set_power_state(pdev, PCI_D0);
2195 pci_enable_wake(pdev, PCI_D0, 0);
2196 pci_restore_state(pdev);
2197 ioc->pcidev = pdev;
2198 err = mpt_mapresources(ioc);
2199 if (err)
2200 return err;
2201
2202 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2203 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2204 ioc->add_sge = &mpt_add_sge_64bit_1078;
2205 else
2206 ioc->add_sge = &mpt_add_sge_64bit;
2207 ioc->add_chain = &mpt_add_chain_64bit;
2208 ioc->sg_addr_size = 8;
2209 } else {
2210
2211 ioc->add_sge = &mpt_add_sge;
2212 ioc->add_chain = &mpt_add_chain;
2213 ioc->sg_addr_size = 4;
2214 }
2215 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2216
2217 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2218 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2219 CHIPREG_READ32(&ioc->chip->Doorbell));
2220
2221 /*
2222 * Errata workaround for SAS pci express:
2223 * Upon returning to the D0 state, the contents of the doorbell will be
2224 * stale data, and this will incorrectly signal to the host driver that
2225 * the firmware is ready to process mpt commands. The workaround is
2226 * to issue a diagnostic reset.
2227 */
2228 if (ioc->bus_type == SAS && (pdev->device ==
2229 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2230 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2231 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2232 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2233 ioc->name);
2234 goto out;
2235 }
2236 }
2237
2238 /* bring ioc to operational state */
2239 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2240 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2241 CAN_SLEEP);
2242 if (recovery_state != 0)
2243 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2244 "error:[%x]\n", ioc->name, recovery_state);
2245 else
2246 printk(MYIOC_s_INFO_FMT
2247 "pci-resume: success\n", ioc->name);
2248 out:
2249 return 0;
2250
2251}
2252#endif
2253
2254static int
2255mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2256{
2257 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2258 ioc->bus_type != SPI) ||
2259 (MptDriverClass[index] == MPTFC_DRIVER &&
2260 ioc->bus_type != FC) ||
2261 (MptDriverClass[index] == MPTSAS_DRIVER &&
2262 ioc->bus_type != SAS))
2263 /* make sure we only call the relevant reset handler
2264 * for the bus */
2265 return 0;
2266 return (MptResetHandlers[index])(ioc, reset_phase);
2267}
2268
2269/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2270/**
2271 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2272 * @ioc: Pointer to MPT adapter structure
2273 * @reason: Event word / reason
2274 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2275 *
2276 * This routine performs all the steps necessary to bring the IOC
2277 * to a OPERATIONAL state.
2278 *
2279 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2280 * MPT adapter.
2281 *
2282 * Returns:
2283 * 0 for success
2284 * -1 if failed to get board READY
2285 * -2 if READY but IOCFacts Failed
2286 * -3 if READY but PrimeIOCFifos Failed
2287 * -4 if READY but IOCInit Failed
2288 * -5 if failed to enable_device and/or request_selected_regions
2289 * -6 if failed to upload firmware
2290 */
2291static int
2292mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2293{
2294 int hard_reset_done = 0;
2295 int alt_ioc_ready = 0;
2296 int hard;
2297 int rc=0;
2298 int ii;
2299 int ret = 0;
2300 int reset_alt_ioc_active = 0;
2301 int irq_allocated = 0;
2302 u8 *a;
2303
2304 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2305 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2306
2307 /* Disable reply interrupts (also blocks FreeQ) */
2308 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2309 ioc->active = 0;
2310
2311 if (ioc->alt_ioc) {
2312 if (ioc->alt_ioc->active ||
2313 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2314 reset_alt_ioc_active = 1;
2315 /* Disable alt-IOC's reply interrupts
2316 * (and FreeQ) for a bit
2317 **/
2318 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2319 0xFFFFFFFF);
2320 ioc->alt_ioc->active = 0;
2321 }
2322 }
2323
2324 hard = 1;
2325 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2326 hard = 0;
2327
2328 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2329 if (hard_reset_done == -4) {
2330 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2331 ioc->name);
2332
2333 if (reset_alt_ioc_active && ioc->alt_ioc) {
2334 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2335 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2336 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2337 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2338 ioc->alt_ioc->active = 1;
2339 }
2340
2341 } else {
2342 printk(MYIOC_s_WARN_FMT
2343 "NOT READY WARNING!\n", ioc->name);
2344 }
2345 ret = -1;
2346 goto out;
2347 }
2348
2349 /* hard_reset_done = 0 if a soft reset was performed
2350 * and 1 if a hard reset was performed.
2351 */
2352 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2353 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2354 alt_ioc_ready = 1;
2355 else
2356 printk(MYIOC_s_WARN_FMT
2357 ": alt-ioc Not ready WARNING!\n",
2358 ioc->alt_ioc->name);
2359 }
2360
2361 for (ii=0; ii<5; ii++) {
2362 /* Get IOC facts! Allow 5 retries */
2363 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2364 break;
2365 }
2366
2367
2368 if (ii == 5) {
2369 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2370 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2371 ret = -2;
2372 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2373 MptDisplayIocCapabilities(ioc);
2374 }
2375
2376 if (alt_ioc_ready) {
2377 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2378 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2379 "Initial Alt IocFacts failed rc=%x\n",
2380 ioc->name, rc));
2381 /* Retry - alt IOC was initialized once
2382 */
2383 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2384 }
2385 if (rc) {
2386 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2387 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2388 alt_ioc_ready = 0;
2389 reset_alt_ioc_active = 0;
2390 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2391 MptDisplayIocCapabilities(ioc->alt_ioc);
2392 }
2393 }
2394
2395 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2396 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2397 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2398 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2399 IORESOURCE_IO);
2400 if (pci_enable_device(ioc->pcidev))
2401 return -5;
2402 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2403 "mpt"))
2404 return -5;
2405 }
2406
2407 /*
2408 * Device is reset now. It must have de-asserted the interrupt line
2409 * (if it was asserted) and it should be safe to register for the
2410 * interrupt now.
2411 */
2412 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2413 ioc->pci_irq = -1;
2414 if (ioc->pcidev->irq) {
2415 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2416 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2417 ioc->name);
2418 else
2419 ioc->msi_enable = 0;
2420 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2421 IRQF_SHARED, ioc->name, ioc);
2422 if (rc < 0) {
2423 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2424 "interrupt %d!\n",
2425 ioc->name, ioc->pcidev->irq);
2426 if (ioc->msi_enable)
2427 pci_disable_msi(ioc->pcidev);
2428 ret = -EBUSY;
2429 goto out;
2430 }
2431 irq_allocated = 1;
2432 ioc->pci_irq = ioc->pcidev->irq;
2433 pci_set_master(ioc->pcidev); /* ?? */
2434 pci_set_drvdata(ioc->pcidev, ioc);
2435 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2436 "installed at interrupt %d\n", ioc->name,
2437 ioc->pcidev->irq));
2438 }
2439 }
2440
2441 /* Prime reply & request queues!
2442 * (mucho alloc's) Must be done prior to
2443 * init as upper addresses are needed for init.
2444 * If fails, continue with alt-ioc processing
2445 */
2446 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2447 ioc->name));
2448 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2449 ret = -3;
2450
2451 /* May need to check/upload firmware & data here!
2452 * If fails, continue with alt-ioc processing
2453 */
2454 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2455 ioc->name));
2456 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2457 ret = -4;
2458// NEW!
2459 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2460 printk(MYIOC_s_WARN_FMT
2461 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2462 ioc->alt_ioc->name, rc);
2463 alt_ioc_ready = 0;
2464 reset_alt_ioc_active = 0;
2465 }
2466
2467 if (alt_ioc_ready) {
2468 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2469 alt_ioc_ready = 0;
2470 reset_alt_ioc_active = 0;
2471 printk(MYIOC_s_WARN_FMT
2472 ": alt-ioc: (%d) init failure WARNING!\n",
2473 ioc->alt_ioc->name, rc);
2474 }
2475 }
2476
2477 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2478 if (ioc->upload_fw) {
2479 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2480 "firmware upload required!\n", ioc->name));
2481
2482 /* Controller is not operational, cannot do upload
2483 */
2484 if (ret == 0) {
2485 rc = mpt_do_upload(ioc, sleepFlag);
2486 if (rc == 0) {
2487 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2488 /*
2489 * Maintain only one pointer to FW memory
2490 * so there will not be two attempt to
2491 * downloadboot onboard dual function
2492 * chips (mpt_adapter_disable,
2493 * mpt_diag_reset)
2494 */
2495 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2496 "mpt_upload: alt_%s has cached_fw=%p \n",
2497 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2498 ioc->cached_fw = NULL;
2499 }
2500 } else {
2501 printk(MYIOC_s_WARN_FMT
2502 "firmware upload failure!\n", ioc->name);
2503 ret = -6;
2504 }
2505 }
2506 }
2507 }
2508
2509 /* Enable MPT base driver management of EventNotification
2510 * and EventAck handling.
2511 */
2512 if ((ret == 0) && (!ioc->facts.EventState)) {
2513 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2514 "SendEventNotification\n",
2515 ioc->name));
2516 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2517 }
2518
2519 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2520 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2521
2522 if (ret == 0) {
2523 /* Enable! (reply interrupt) */
2524 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2525 ioc->active = 1;
2526 }
2527 if (rc == 0) { /* alt ioc */
2528 if (reset_alt_ioc_active && ioc->alt_ioc) {
2529 /* (re)Enable alt-IOC! (reply interrupt) */
2530 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2531 "reply irq re-enabled\n",
2532 ioc->alt_ioc->name));
2533 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2534 MPI_HIM_DIM);
2535 ioc->alt_ioc->active = 1;
2536 }
2537 }
2538
2539
2540 /* Add additional "reason" check before call to GetLanConfigPages
2541 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2542 * recursive scenario; GetLanConfigPages times out, timer expired
2543 * routine calls HardResetHandler, which calls into here again,
2544 * and we try GetLanConfigPages again...
2545 */
2546 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2547
2548 /*
2549 * Initialize link list for inactive raid volumes.
2550 */
2551 mutex_init(&ioc->raid_data.inactive_list_mutex);
2552 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2553
2554 switch (ioc->bus_type) {
2555
2556 case SAS:
2557 /* clear persistency table */
2558 if(ioc->facts.IOCExceptions &
2559 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2560 ret = mptbase_sas_persist_operation(ioc,
2561 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2562 if(ret != 0)
2563 goto out;
2564 }
2565
2566 /* Find IM volumes
2567 */
2568 mpt_findImVolumes(ioc);
2569
2570 /* Check, and possibly reset, the coalescing value
2571 */
2572 mpt_read_ioc_pg_1(ioc);
2573
2574 break;
2575
2576 case FC:
2577 if ((ioc->pfacts[0].ProtocolFlags &
2578 MPI_PORTFACTS_PROTOCOL_LAN) &&
2579 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2580 /*
2581 * Pre-fetch the ports LAN MAC address!
2582 * (LANPage1_t stuff)
2583 */
2584 (void) GetLanConfigPages(ioc);
2585 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2586 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2587 "LanAddr = %02X:%02X:%02X"
2588 ":%02X:%02X:%02X\n",
2589 ioc->name, a[5], a[4],
2590 a[3], a[2], a[1], a[0]));
2591 }
2592 break;
2593
2594 case SPI:
2595 /* Get NVRAM and adapter maximums from SPP 0 and 2
2596 */
2597 mpt_GetScsiPortSettings(ioc, 0);
2598
2599 /* Get version and length of SDP 1
2600 */
2601 mpt_readScsiDevicePageHeaders(ioc, 0);
2602
2603 /* Find IM volumes
2604 */
2605 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2606 mpt_findImVolumes(ioc);
2607
2608 /* Check, and possibly reset, the coalescing value
2609 */
2610 mpt_read_ioc_pg_1(ioc);
2611
2612 mpt_read_ioc_pg_4(ioc);
2613
2614 break;
2615 }
2616
2617 GetIoUnitPage2(ioc);
2618 mpt_get_manufacturing_pg_0(ioc);
2619 }
2620
2621 out:
2622 if ((ret != 0) && irq_allocated) {
2623 free_irq(ioc->pci_irq, ioc);
2624 if (ioc->msi_enable)
2625 pci_disable_msi(ioc->pcidev);
2626 }
2627 return ret;
2628}
2629
2630/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2631/**
2632 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2633 * @ioc: Pointer to MPT adapter structure
2634 * @pdev: Pointer to (struct pci_dev) structure
2635 *
2636 * Search for PCI bus/dev_function which matches
2637 * PCI bus/dev_function (+/-1) for newly discovered 929,
2638 * 929X, 1030 or 1035.
2639 *
2640 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2641 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2642 */
2643static void
2644mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2645{
2646 struct pci_dev *peer=NULL;
2647 unsigned int slot = PCI_SLOT(pdev->devfn);
2648 unsigned int func = PCI_FUNC(pdev->devfn);
2649 MPT_ADAPTER *ioc_srch;
2650
2651 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2652 " searching for devfn match on %x or %x\n",
2653 ioc->name, pci_name(pdev), pdev->bus->number,
2654 pdev->devfn, func-1, func+1));
2655
2656 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2657 if (!peer) {
2658 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2659 if (!peer)
2660 return;
2661 }
2662
2663 list_for_each_entry(ioc_srch, &ioc_list, list) {
2664 struct pci_dev *_pcidev = ioc_srch->pcidev;
2665 if (_pcidev == peer) {
2666 /* Paranoia checks */
2667 if (ioc->alt_ioc != NULL) {
2668 printk(MYIOC_s_WARN_FMT
2669 "Oops, already bound (%s <==> %s)!\n",
2670 ioc->name, ioc->name, ioc->alt_ioc->name);
2671 break;
2672 } else if (ioc_srch->alt_ioc != NULL) {
2673 printk(MYIOC_s_WARN_FMT
2674 "Oops, already bound (%s <==> %s)!\n",
2675 ioc_srch->name, ioc_srch->name,
2676 ioc_srch->alt_ioc->name);
2677 break;
2678 }
2679 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2680 "FOUND! binding %s <==> %s\n",
2681 ioc->name, ioc->name, ioc_srch->name));
2682 ioc_srch->alt_ioc = ioc;
2683 ioc->alt_ioc = ioc_srch;
2684 }
2685 }
2686 pci_dev_put(peer);
2687}
2688
2689/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2690/**
2691 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2692 * @ioc: Pointer to MPT adapter structure
2693 */
2694static void
2695mpt_adapter_disable(MPT_ADAPTER *ioc)
2696{
2697 int sz;
2698 int ret;
2699
2700 if (ioc->cached_fw != NULL) {
2701 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2702 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2703 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2704 ioc->cached_fw, CAN_SLEEP)) < 0) {
2705 printk(MYIOC_s_WARN_FMT
2706 ": firmware downloadboot failure (%d)!\n",
2707 ioc->name, ret);
2708 }
2709 }
2710
2711 /*
2712 * Put the controller into ready state (if its not already)
2713 */
2714 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2715 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2716 CAN_SLEEP)) {
2717 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2718 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2719 "reset failed to put ioc in ready state!\n",
2720 ioc->name, __func__);
2721 } else
2722 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2723 "failed!\n", ioc->name, __func__);
2724 }
2725
2726
2727 /* Disable adapter interrupts! */
2728 synchronize_irq(ioc->pcidev->irq);
2729 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2730 ioc->active = 0;
2731
2732 /* Clear any lingering interrupt */
2733 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2734 CHIPREG_READ32(&ioc->chip->IntStatus);
2735
2736 if (ioc->alloc != NULL) {
2737 sz = ioc->alloc_sz;
2738 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2739 ioc->name, ioc->alloc, ioc->alloc_sz));
2740 pci_free_consistent(ioc->pcidev, sz,
2741 ioc->alloc, ioc->alloc_dma);
2742 ioc->reply_frames = NULL;
2743 ioc->req_frames = NULL;
2744 ioc->alloc = NULL;
2745 ioc->alloc_total -= sz;
2746 }
2747
2748 if (ioc->sense_buf_pool != NULL) {
2749 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2750 pci_free_consistent(ioc->pcidev, sz,
2751 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
2752 ioc->sense_buf_pool = NULL;
2753 ioc->alloc_total -= sz;
2754 }
2755
2756 if (ioc->events != NULL){
2757 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2758 kfree(ioc->events);
2759 ioc->events = NULL;
2760 ioc->alloc_total -= sz;
2761 }
2762
2763 mpt_free_fw_memory(ioc);
2764
2765 kfree(ioc->spi_data.nvram);
2766 mpt_inactive_raid_list_free(ioc);
2767 kfree(ioc->raid_data.pIocPg2);
2768 kfree(ioc->raid_data.pIocPg3);
2769 ioc->spi_data.nvram = NULL;
2770 ioc->raid_data.pIocPg3 = NULL;
2771
2772 if (ioc->spi_data.pIocPg4 != NULL) {
2773 sz = ioc->spi_data.IocPg4Sz;
2774 pci_free_consistent(ioc->pcidev, sz,
2775 ioc->spi_data.pIocPg4,
2776 ioc->spi_data.IocPg4_dma);
2777 ioc->spi_data.pIocPg4 = NULL;
2778 ioc->alloc_total -= sz;
2779 }
2780
2781 if (ioc->ReqToChain != NULL) {
2782 kfree(ioc->ReqToChain);
2783 kfree(ioc->RequestNB);
2784 ioc->ReqToChain = NULL;
2785 }
2786
2787 kfree(ioc->ChainToChain);
2788 ioc->ChainToChain = NULL;
2789
2790 if (ioc->HostPageBuffer != NULL) {
2791 if((ret = mpt_host_page_access_control(ioc,
2792 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2793 printk(MYIOC_s_ERR_FMT
2794 ": %s: host page buffers free failed (%d)!\n",
2795 ioc->name, __func__, ret);
2796 }
2797 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2798 "HostPageBuffer free @ %p, sz=%d bytes\n",
2799 ioc->name, ioc->HostPageBuffer,
2800 ioc->HostPageBuffer_sz));
2801 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
2802 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2803 ioc->HostPageBuffer = NULL;
2804 ioc->HostPageBuffer_sz = 0;
2805 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2806 }
2807
2808 pci_set_drvdata(ioc->pcidev, NULL);
2809}
2810/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2811/**
2812 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2813 * @ioc: Pointer to MPT adapter structure
2814 *
2815 * This routine unregisters h/w resources and frees all alloc'd memory
2816 * associated with a MPT adapter structure.
2817 */
2818static void
2819mpt_adapter_dispose(MPT_ADAPTER *ioc)
2820{
2821 int sz_first, sz_last;
2822
2823 if (ioc == NULL)
2824 return;
2825
2826 sz_first = ioc->alloc_total;
2827
2828 mpt_adapter_disable(ioc);
2829
2830 if (ioc->pci_irq != -1) {
2831 free_irq(ioc->pci_irq, ioc);
2832 if (ioc->msi_enable)
2833 pci_disable_msi(ioc->pcidev);
2834 ioc->pci_irq = -1;
2835 }
2836
2837 if (ioc->memmap != NULL) {
2838 iounmap(ioc->memmap);
2839 ioc->memmap = NULL;
2840 }
2841
2842 pci_disable_device(ioc->pcidev);
2843 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2844
2845 /* Zap the adapter lookup ptr! */
2846 list_del(&ioc->list);
2847
2848 sz_last = ioc->alloc_total;
2849 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2850 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2851
2852 if (ioc->alt_ioc)
2853 ioc->alt_ioc->alt_ioc = NULL;
2854
2855 kfree(ioc);
2856}
2857
2858/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2859/**
2860 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2861 * @ioc: Pointer to MPT adapter structure
2862 */
2863static void
2864MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2865{
2866 int i = 0;
2867
2868 printk(KERN_INFO "%s: ", ioc->name);
2869 if (ioc->prod_name)
2870 printk("%s: ", ioc->prod_name);
2871 printk("Capabilities={");
2872
2873 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2874 printk("Initiator");
2875 i++;
2876 }
2877
2878 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2879 printk("%sTarget", i ? "," : "");
2880 i++;
2881 }
2882
2883 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2884 printk("%sLAN", i ? "," : "");
2885 i++;
2886 }
2887
2888#if 0
2889 /*
2890 * This would probably evoke more questions than it's worth
2891 */
2892 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2893 printk("%sLogBusAddr", i ? "," : "");
2894 i++;
2895 }
2896#endif
2897
2898 printk("}\n");
2899}
2900
2901/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2902/**
2903 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2904 * @ioc: Pointer to MPT_ADAPTER structure
2905 * @force: Force hard KickStart of IOC
2906 * @sleepFlag: Specifies whether the process can sleep
2907 *
2908 * Returns:
2909 * 1 - DIAG reset and READY
2910 * 0 - READY initially OR soft reset and READY
2911 * -1 - Any failure on KickStart
2912 * -2 - Msg Unit Reset Failed
2913 * -3 - IO Unit Reset Failed
2914 * -4 - IOC owned by a PEER
2915 */
2916static int
2917MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2918{
2919 u32 ioc_state;
2920 int statefault = 0;
2921 int cntdn;
2922 int hard_reset_done = 0;
2923 int r;
2924 int ii;
2925 int whoinit;
2926
2927 /* Get current [raw] IOC state */
2928 ioc_state = mpt_GetIocState(ioc, 0);
2929 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2930
2931 /*
2932 * Check to see if IOC got left/stuck in doorbell handshake
2933 * grip of death. If so, hard reset the IOC.
2934 */
2935 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2936 statefault = 1;
2937 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2938 ioc->name);
2939 }
2940
2941 /* Is it already READY? */
2942 if (!statefault &&
2943 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2944 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2945 "IOC is in READY state\n", ioc->name));
2946 return 0;
2947 }
2948
2949 /*
2950 * Check to see if IOC is in FAULT state.
2951 */
2952 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2953 statefault = 2;
2954 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2955 ioc->name);
2956 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2957 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2958 }
2959
2960 /*
2961 * Hmmm... Did it get left operational?
2962 */
2963 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2964 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2965 ioc->name));
2966
2967 /* Check WhoInit.
2968 * If PCI Peer, exit.
2969 * Else, if no fault conditions are present, issue a MessageUnitReset
2970 * Else, fall through to KickStart case
2971 */
2972 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2973 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2974 "whoinit 0x%x statefault %d force %d\n",
2975 ioc->name, whoinit, statefault, force));
2976 if (whoinit == MPI_WHOINIT_PCI_PEER)
2977 return -4;
2978 else {
2979 if ((statefault == 0 ) && (force == 0)) {
2980 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2981 return 0;
2982 }
2983 statefault = 3;
2984 }
2985 }
2986
2987 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2988 if (hard_reset_done < 0)
2989 return -1;
2990
2991 /*
2992 * Loop here waiting for IOC to come READY.
2993 */
2994 ii = 0;
2995 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2996
2997 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2998 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2999 /*
3000 * BIOS or previous driver load left IOC in OP state.
3001 * Reset messaging FIFOs.
3002 */
3003 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
3004 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
3005 return -2;
3006 }
3007 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3008 /*
3009 * Something is wrong. Try to get IOC back
3010 * to a known state.
3011 */
3012 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3013 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3014 return -3;
3015 }
3016 }
3017
3018 ii++; cntdn--;
3019 if (!cntdn) {
3020 printk(MYIOC_s_ERR_FMT
3021 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3022 ioc->name, ioc_state, (int)((ii+5)/HZ));
3023 return -ETIME;
3024 }
3025
3026 if (sleepFlag == CAN_SLEEP) {
3027 msleep(1);
3028 } else {
3029 mdelay (1); /* 1 msec delay */
3030 }
3031
3032 }
3033
3034 if (statefault < 3) {
3035 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3036 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3037 }
3038
3039 return hard_reset_done;
3040}
3041
3042/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3043/**
3044 * mpt_GetIocState - Get the current state of a MPT adapter.
3045 * @ioc: Pointer to MPT_ADAPTER structure
3046 * @cooked: Request raw or cooked IOC state
3047 *
3048 * Returns all IOC Doorbell register bits if cooked==0, else just the
3049 * Doorbell bits in MPI_IOC_STATE_MASK.
3050 */
3051u32
3052mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3053{
3054 u32 s, sc;
3055
3056 /* Get! */
3057 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3058 sc = s & MPI_IOC_STATE_MASK;
3059
3060 /* Save! */
3061 ioc->last_state = sc;
3062
3063 return cooked ? sc : s;
3064}
3065
3066/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3067/**
3068 * GetIocFacts - Send IOCFacts request to MPT adapter.
3069 * @ioc: Pointer to MPT_ADAPTER structure
3070 * @sleepFlag: Specifies whether the process can sleep
3071 * @reason: If recovery, only update facts.
3072 *
3073 * Returns 0 for success, non-zero for failure.
3074 */
3075static int
3076GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3077{
3078 IOCFacts_t get_facts;
3079 IOCFactsReply_t *facts;
3080 int r;
3081 int req_sz;
3082 int reply_sz;
3083 int sz;
3084 u32 status, vv;
3085 u8 shiftFactor=1;
3086
3087 /* IOC *must* NOT be in RESET state! */
3088 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3089 printk(KERN_ERR MYNAM
3090 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3091 ioc->name, ioc->last_state);
3092 return -44;
3093 }
3094
3095 facts = &ioc->facts;
3096
3097 /* Destination (reply area)... */
3098 reply_sz = sizeof(*facts);
3099 memset(facts, 0, reply_sz);
3100
3101 /* Request area (get_facts on the stack right now!) */
3102 req_sz = sizeof(get_facts);
3103 memset(&get_facts, 0, req_sz);
3104
3105 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3106 /* Assert: All other get_facts fields are zero! */
3107
3108 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3109 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3110 ioc->name, req_sz, reply_sz));
3111
3112 /* No non-zero fields in the get_facts request are greater than
3113 * 1 byte in size, so we can just fire it off as is.
3114 */
3115 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3116 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3117 if (r != 0)
3118 return r;
3119
3120 /*
3121 * Now byte swap (GRRR) the necessary fields before any further
3122 * inspection of reply contents.
3123 *
3124 * But need to do some sanity checks on MsgLength (byte) field
3125 * to make sure we don't zero IOC's req_sz!
3126 */
3127 /* Did we get a valid reply? */
3128 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3129 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3130 /*
3131 * If not been here, done that, save off first WhoInit value
3132 */
3133 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3134 ioc->FirstWhoInit = facts->WhoInit;
3135 }
3136
3137 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3138 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3139 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3140 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3141 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3142 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3143 /* CHECKME! IOCStatus, IOCLogInfo */
3144
3145 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3146 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3147
3148 /*
3149 * FC f/w version changed between 1.1 and 1.2
3150 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3151 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3152 */
3153 if (facts->MsgVersion < MPI_VERSION_01_02) {
3154 /*
3155 * Handle old FC f/w style, convert to new...
3156 */
3157 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3158 facts->FWVersion.Word =
3159 ((oldv<<12) & 0xFF000000) |
3160 ((oldv<<8) & 0x000FFF00);
3161 } else
3162 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3163
3164 facts->ProductID = le16_to_cpu(facts->ProductID);
3165
3166 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3167 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3168 ioc->ir_firmware = 1;
3169
3170 facts->CurrentHostMfaHighAddr =
3171 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3172 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3173 facts->CurrentSenseBufferHighAddr =
3174 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3175 facts->CurReplyFrameSize =
3176 le16_to_cpu(facts->CurReplyFrameSize);
3177 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3178
3179 /*
3180 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3181 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3182 * to 14 in MPI-1.01.0x.
3183 */
3184 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3185 facts->MsgVersion > MPI_VERSION_01_00) {
3186 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3187 }
3188
3189 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3190
3191 if (!facts->RequestFrameSize) {
3192 /* Something is wrong! */
3193 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3194 ioc->name);
3195 return -55;
3196 }
3197
3198 r = sz = facts->BlockSize;
3199 vv = ((63 / (sz * 4)) + 1) & 0x03;
3200 ioc->NB_for_64_byte_frame = vv;
3201 while ( sz )
3202 {
3203 shiftFactor++;
3204 sz = sz >> 1;
3205 }
3206 ioc->NBShiftFactor = shiftFactor;
3207 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3208 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3209 ioc->name, vv, shiftFactor, r));
3210
3211 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3212 /*
3213 * Set values for this IOC's request & reply frame sizes,
3214 * and request & reply queue depths...
3215 */
3216 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3217 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3218 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3219 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3220
3221 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3222 ioc->name, ioc->reply_sz, ioc->reply_depth));
3223 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3224 ioc->name, ioc->req_sz, ioc->req_depth));
3225
3226 /* Get port facts! */
3227 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3228 return r;
3229 }
3230 } else {
3231 printk(MYIOC_s_ERR_FMT
3232 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3233 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3234 RequestFrameSize)/sizeof(u32)));
3235 return -66;
3236 }
3237
3238 return 0;
3239}
3240
3241/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3242/**
3243 * GetPortFacts - Send PortFacts request to MPT adapter.
3244 * @ioc: Pointer to MPT_ADAPTER structure
3245 * @portnum: Port number
3246 * @sleepFlag: Specifies whether the process can sleep
3247 *
3248 * Returns 0 for success, non-zero for failure.
3249 */
3250static int
3251GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3252{
3253 PortFacts_t get_pfacts;
3254 PortFactsReply_t *pfacts;
3255 int ii;
3256 int req_sz;
3257 int reply_sz;
3258 int max_id;
3259
3260 /* IOC *must* NOT be in RESET state! */
3261 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3262 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3263 ioc->name, ioc->last_state );
3264 return -4;
3265 }
3266
3267 pfacts = &ioc->pfacts[portnum];
3268
3269 /* Destination (reply area)... */
3270 reply_sz = sizeof(*pfacts);
3271 memset(pfacts, 0, reply_sz);
3272
3273 /* Request area (get_pfacts on the stack right now!) */
3274 req_sz = sizeof(get_pfacts);
3275 memset(&get_pfacts, 0, req_sz);
3276
3277 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3278 get_pfacts.PortNumber = portnum;
3279 /* Assert: All other get_pfacts fields are zero! */
3280
3281 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3282 ioc->name, portnum));
3283
3284 /* No non-zero fields in the get_pfacts request are greater than
3285 * 1 byte in size, so we can just fire it off as is.
3286 */
3287 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3288 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3289 if (ii != 0)
3290 return ii;
3291
3292 /* Did we get a valid reply? */
3293
3294 /* Now byte swap the necessary fields in the response. */
3295 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3296 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3297 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3298 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3299 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3300 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3301 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3302 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3303 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3304
3305 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3306 pfacts->MaxDevices;
3307 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3308 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3309
3310 /*
3311 * Place all the devices on channels
3312 *
3313 * (for debuging)
3314 */
3315 if (mpt_channel_mapping) {
3316 ioc->devices_per_bus = 1;
3317 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3318 }
3319
3320 return 0;
3321}
3322
3323/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3324/**
3325 * SendIocInit - Send IOCInit request to MPT adapter.
3326 * @ioc: Pointer to MPT_ADAPTER structure
3327 * @sleepFlag: Specifies whether the process can sleep
3328 *
3329 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3330 *
3331 * Returns 0 for success, non-zero for failure.
3332 */
3333static int
3334SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3335{
3336 IOCInit_t ioc_init;
3337 MPIDefaultReply_t init_reply;
3338 u32 state;
3339 int r;
3340 int count;
3341 int cntdn;
3342
3343 memset(&ioc_init, 0, sizeof(ioc_init));
3344 memset(&init_reply, 0, sizeof(init_reply));
3345
3346 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3347 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3348
3349 /* If we are in a recovery mode and we uploaded the FW image,
3350 * then this pointer is not NULL. Skip the upload a second time.
3351 * Set this flag if cached_fw set for either IOC.
3352 */
3353 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3354 ioc->upload_fw = 1;
3355 else
3356 ioc->upload_fw = 0;
3357 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3358 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3359
3360 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3361 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3362
3363 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3364 ioc->name, ioc->facts.MsgVersion));
3365 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3366 // set MsgVersion and HeaderVersion host driver was built with
3367 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3368 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3369
3370 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3371 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3372 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3373 return -99;
3374 }
3375 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3376
3377 if (ioc->sg_addr_size == sizeof(u64)) {
3378 /* Save the upper 32-bits of the request
3379 * (reply) and sense buffers.
3380 */
3381 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3382 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3383 } else {
3384 /* Force 32-bit addressing */
3385 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3386 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3387 }
3388
3389 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3390 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3391 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3392 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3393
3394 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3395 ioc->name, &ioc_init));
3396
3397 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3398 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3399 if (r != 0) {
3400 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3401 return r;
3402 }
3403
3404 /* No need to byte swap the multibyte fields in the reply
3405 * since we don't even look at its contents.
3406 */
3407
3408 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3409 ioc->name, &ioc_init));
3410
3411 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3412 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3413 return r;
3414 }
3415
3416 /* YIKES! SUPER IMPORTANT!!!
3417 * Poll IocState until _OPERATIONAL while IOC is doing
3418 * LoopInit and TargetDiscovery!
3419 */
3420 count = 0;
3421 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3422 state = mpt_GetIocState(ioc, 1);
3423 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3424 if (sleepFlag == CAN_SLEEP) {
3425 msleep(1);
3426 } else {
3427 mdelay(1);
3428 }
3429
3430 if (!cntdn) {
3431 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3432 ioc->name, (int)((count+5)/HZ));
3433 return -9;
3434 }
3435
3436 state = mpt_GetIocState(ioc, 1);
3437 count++;
3438 }
3439 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3440 ioc->name, count));
3441
3442 ioc->aen_event_read_flag=0;
3443 return r;
3444}
3445
3446/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3447/**
3448 * SendPortEnable - Send PortEnable request to MPT adapter port.
3449 * @ioc: Pointer to MPT_ADAPTER structure
3450 * @portnum: Port number to enable
3451 * @sleepFlag: Specifies whether the process can sleep
3452 *
3453 * Send PortEnable to bring IOC to OPERATIONAL state.
3454 *
3455 * Returns 0 for success, non-zero for failure.
3456 */
3457static int
3458SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3459{
3460 PortEnable_t port_enable;
3461 MPIDefaultReply_t reply_buf;
3462 int rc;
3463 int req_sz;
3464 int reply_sz;
3465
3466 /* Destination... */
3467 reply_sz = sizeof(MPIDefaultReply_t);
3468 memset(&reply_buf, 0, reply_sz);
3469
3470 req_sz = sizeof(PortEnable_t);
3471 memset(&port_enable, 0, req_sz);
3472
3473 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3474 port_enable.PortNumber = portnum;
3475/* port_enable.ChainOffset = 0; */
3476/* port_enable.MsgFlags = 0; */
3477/* port_enable.MsgContext = 0; */
3478
3479 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3480 ioc->name, portnum, &port_enable));
3481
3482 /* RAID FW may take a long time to enable
3483 */
3484 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3485 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3486 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3487 300 /*seconds*/, sleepFlag);
3488 } else {
3489 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3490 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3491 30 /*seconds*/, sleepFlag);
3492 }
3493 return rc;
3494}
3495
3496/**
3497 * mpt_alloc_fw_memory - allocate firmware memory
3498 * @ioc: Pointer to MPT_ADAPTER structure
3499 * @size: total FW bytes
3500 *
3501 * If memory has already been allocated, the same (cached) value
3502 * is returned.
3503 *
3504 * Return 0 if successful, or non-zero for failure
3505 **/
3506int
3507mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3508{
3509 int rc;
3510
3511 if (ioc->cached_fw) {
3512 rc = 0; /* use already allocated memory */
3513 goto out;
3514 }
3515 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3516 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3517 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3518 rc = 0;
3519 goto out;
3520 }
3521 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3522 if (!ioc->cached_fw) {
3523 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3524 ioc->name);
3525 rc = -1;
3526 } else {
3527 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3528 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3529 ioc->alloc_total += size;
3530 rc = 0;
3531 }
3532 out:
3533 return rc;
3534}
3535
3536/**
3537 * mpt_free_fw_memory - free firmware memory
3538 * @ioc: Pointer to MPT_ADAPTER structure
3539 *
3540 * If alt_img is NULL, delete from ioc structure.
3541 * Else, delete a secondary image in same format.
3542 **/
3543void
3544mpt_free_fw_memory(MPT_ADAPTER *ioc)
3545{
3546 int sz;
3547
3548 if (!ioc->cached_fw)
3549 return;
3550
3551 sz = ioc->facts.FWImageSize;
3552 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3553 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3554 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3555 ioc->alloc_total -= sz;
3556 ioc->cached_fw = NULL;
3557}
3558
3559/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3560/**
3561 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3562 * @ioc: Pointer to MPT_ADAPTER structure
3563 * @sleepFlag: Specifies whether the process can sleep
3564 *
3565 * Returns 0 for success, >0 for handshake failure
3566 * <0 for fw upload failure.
3567 *
3568 * Remark: If bound IOC and a successful FWUpload was performed
3569 * on the bound IOC, the second image is discarded
3570 * and memory is free'd. Both channels must upload to prevent
3571 * IOC from running in degraded mode.
3572 */
3573static int
3574mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3575{
3576 u8 reply[sizeof(FWUploadReply_t)];
3577 FWUpload_t *prequest;
3578 FWUploadReply_t *preply;
3579 FWUploadTCSGE_t *ptcsge;
3580 u32 flagsLength;
3581 int ii, sz, reply_sz;
3582 int cmdStatus;
3583 int request_size;
3584 /* If the image size is 0, we are done.
3585 */
3586 if ((sz = ioc->facts.FWImageSize) == 0)
3587 return 0;
3588
3589 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3590 return -ENOMEM;
3591
3592 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3593 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3594
3595 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3596 kzalloc(ioc->req_sz, GFP_KERNEL);
3597 if (!prequest) {
3598 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3599 "while allocating memory \n", ioc->name));
3600 mpt_free_fw_memory(ioc);
3601 return -ENOMEM;
3602 }
3603
3604 preply = (FWUploadReply_t *)&reply;
3605
3606 reply_sz = sizeof(reply);
3607 memset(preply, 0, reply_sz);
3608
3609 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3610 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3611
3612 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3613 ptcsge->DetailsLength = 12;
3614 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3615 ptcsge->ImageSize = cpu_to_le32(sz);
3616 ptcsge++;
3617
3618 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3619 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3620 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3621 ioc->SGE_size;
3622 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3623 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3624 ioc->facts.FWImageSize, request_size));
3625 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3626
3627 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3628 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3629
3630 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3631 "rc=%x \n", ioc->name, ii));
3632
3633 cmdStatus = -EFAULT;
3634 if (ii == 0) {
3635 /* Handshake transfer was complete and successful.
3636 * Check the Reply Frame.
3637 */
3638 int status;
3639 status = le16_to_cpu(preply->IOCStatus) &
3640 MPI_IOCSTATUS_MASK;
3641 if (status == MPI_IOCSTATUS_SUCCESS &&
3642 ioc->facts.FWImageSize ==
3643 le32_to_cpu(preply->ActualImageSize))
3644 cmdStatus = 0;
3645 }
3646 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3647 ioc->name, cmdStatus));
3648
3649
3650 if (cmdStatus) {
3651 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3652 "freeing image \n", ioc->name));
3653 mpt_free_fw_memory(ioc);
3654 }
3655 kfree(prequest);
3656
3657 return cmdStatus;
3658}
3659
3660/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3661/**
3662 * mpt_downloadboot - DownloadBoot code
3663 * @ioc: Pointer to MPT_ADAPTER structure
3664 * @pFwHeader: Pointer to firmware header info
3665 * @sleepFlag: Specifies whether the process can sleep
3666 *
3667 * FwDownloadBoot requires Programmed IO access.
3668 *
3669 * Returns 0 for success
3670 * -1 FW Image size is 0
3671 * -2 No valid cached_fw Pointer
3672 * <0 for fw upload failure.
3673 */
3674static int
3675mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3676{
3677 MpiExtImageHeader_t *pExtImage;
3678 u32 fwSize;
3679 u32 diag0val;
3680 int count;
3681 u32 *ptrFw;
3682 u32 diagRwData;
3683 u32 nextImage;
3684 u32 load_addr;
3685 u32 ioc_state=0;
3686
3687 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3688 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3689
3690 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3691 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3692 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3693 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3694 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3695 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3696
3697 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3698
3699 /* wait 1 msec */
3700 if (sleepFlag == CAN_SLEEP) {
3701 msleep(1);
3702 } else {
3703 mdelay (1);
3704 }
3705
3706 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3707 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3708
3709 for (count = 0; count < 30; count ++) {
3710 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3711 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3712 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3713 ioc->name, count));
3714 break;
3715 }
3716 /* wait .1 sec */
3717 if (sleepFlag == CAN_SLEEP) {
3718 msleep (100);
3719 } else {
3720 mdelay (100);
3721 }
3722 }
3723
3724 if ( count == 30 ) {
3725 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3726 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3727 ioc->name, diag0val));
3728 return -3;
3729 }
3730
3731 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3732 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3733 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3734 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3735 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3736 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3737
3738 /* Set the DiagRwEn and Disable ARM bits */
3739 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3740
3741 fwSize = (pFwHeader->ImageSize + 3)/4;
3742 ptrFw = (u32 *) pFwHeader;
3743
3744 /* Write the LoadStartAddress to the DiagRw Address Register
3745 * using Programmed IO
3746 */
3747 if (ioc->errata_flag_1064)
3748 pci_enable_io_access(ioc->pcidev);
3749
3750 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3751 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3752 ioc->name, pFwHeader->LoadStartAddress));
3753
3754 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3755 ioc->name, fwSize*4, ptrFw));
3756 while (fwSize--) {
3757 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3758 }
3759
3760 nextImage = pFwHeader->NextImageHeaderOffset;
3761 while (nextImage) {
3762 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3763
3764 load_addr = pExtImage->LoadStartAddress;
3765
3766 fwSize = (pExtImage->ImageSize + 3) >> 2;
3767 ptrFw = (u32 *)pExtImage;
3768
3769 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3770 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3771 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3772
3773 while (fwSize--) {
3774 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3775 }
3776 nextImage = pExtImage->NextImageHeaderOffset;
3777 }
3778
3779 /* Write the IopResetVectorRegAddr */
3780 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3781 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3782
3783 /* Write the IopResetVectorValue */
3784 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3785 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3786
3787 /* Clear the internal flash bad bit - autoincrementing register,
3788 * so must do two writes.
3789 */
3790 if (ioc->bus_type == SPI) {
3791 /*
3792 * 1030 and 1035 H/W errata, workaround to access
3793 * the ClearFlashBadSignatureBit
3794 */
3795 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3796 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3797 diagRwData |= 0x40000000;
3798 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3799 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3800
3801 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3802 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3803 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3804 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3805
3806 /* wait 1 msec */
3807 if (sleepFlag == CAN_SLEEP) {
3808 msleep (1);
3809 } else {
3810 mdelay (1);
3811 }
3812 }
3813
3814 if (ioc->errata_flag_1064)
3815 pci_disable_io_access(ioc->pcidev);
3816
3817 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3818 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3819 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3820 ioc->name, diag0val));
3821 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3822 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3823 ioc->name, diag0val));
3824 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3825
3826 /* Write 0xFF to reset the sequencer */
3827 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3828
3829 if (ioc->bus_type == SAS) {
3830 ioc_state = mpt_GetIocState(ioc, 0);
3831 if ( (GetIocFacts(ioc, sleepFlag,
3832 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3833 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3834 ioc->name, ioc_state));
3835 return -EFAULT;
3836 }
3837 }
3838
3839 for (count=0; count<HZ*20; count++) {
3840 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3841 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3842 "downloadboot successful! (count=%d) IocState=%x\n",
3843 ioc->name, count, ioc_state));
3844 if (ioc->bus_type == SAS) {
3845 return 0;
3846 }
3847 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3848 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3849 "downloadboot: SendIocInit failed\n",
3850 ioc->name));
3851 return -EFAULT;
3852 }
3853 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3854 "downloadboot: SendIocInit successful\n",
3855 ioc->name));
3856 return 0;
3857 }
3858 if (sleepFlag == CAN_SLEEP) {
3859 msleep (10);
3860 } else {
3861 mdelay (10);
3862 }
3863 }
3864 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3865 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3866 return -EFAULT;
3867}
3868
3869/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3870/**
3871 * KickStart - Perform hard reset of MPT adapter.
3872 * @ioc: Pointer to MPT_ADAPTER structure
3873 * @force: Force hard reset
3874 * @sleepFlag: Specifies whether the process can sleep
3875 *
3876 * This routine places MPT adapter in diagnostic mode via the
3877 * WriteSequence register, and then performs a hard reset of adapter
3878 * via the Diagnostic register.
3879 *
3880 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3881 * or NO_SLEEP (interrupt thread, use mdelay)
3882 * force - 1 if doorbell active, board fault state
3883 * board operational, IOC_RECOVERY or
3884 * IOC_BRINGUP and there is an alt_ioc.
3885 * 0 else
3886 *
3887 * Returns:
3888 * 1 - hard reset, READY
3889 * 0 - no reset due to History bit, READY
3890 * -1 - no reset due to History bit but not READY
3891 * OR reset but failed to come READY
3892 * -2 - no reset, could not enter DIAG mode
3893 * -3 - reset but bad FW bit
3894 */
3895static int
3896KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3897{
3898 int hard_reset_done = 0;
3899 u32 ioc_state=0;
3900 int cnt,cntdn;
3901
3902 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3903 if (ioc->bus_type == SPI) {
3904 /* Always issue a Msg Unit Reset first. This will clear some
3905 * SCSI bus hang conditions.
3906 */
3907 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3908
3909 if (sleepFlag == CAN_SLEEP) {
3910 msleep (1000);
3911 } else {
3912 mdelay (1000);
3913 }
3914 }
3915
3916 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3917 if (hard_reset_done < 0)
3918 return hard_reset_done;
3919
3920 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3921 ioc->name));
3922
3923 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3924 for (cnt=0; cnt<cntdn; cnt++) {
3925 ioc_state = mpt_GetIocState(ioc, 1);
3926 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3927 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3928 ioc->name, cnt));
3929 return hard_reset_done;
3930 }
3931 if (sleepFlag == CAN_SLEEP) {
3932 msleep (10);
3933 } else {
3934 mdelay (10);
3935 }
3936 }
3937
3938 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3939 ioc->name, mpt_GetIocState(ioc, 0)));
3940 return -1;
3941}
3942
3943/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3944/**
3945 * mpt_diag_reset - Perform hard reset of the adapter.
3946 * @ioc: Pointer to MPT_ADAPTER structure
3947 * @ignore: Set if to honor and clear to ignore
3948 * the reset history bit
3949 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3950 * else set to NO_SLEEP (use mdelay instead)
3951 *
3952 * This routine places the adapter in diagnostic mode via the
3953 * WriteSequence register and then performs a hard reset of adapter
3954 * via the Diagnostic register. Adapter should be in ready state
3955 * upon successful completion.
3956 *
3957 * Returns: 1 hard reset successful
3958 * 0 no reset performed because reset history bit set
3959 * -2 enabling diagnostic mode failed
3960 * -3 diagnostic reset failed
3961 */
3962static int
3963mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3964{
3965 u32 diag0val;
3966 u32 doorbell;
3967 int hard_reset_done = 0;
3968 int count = 0;
3969 u32 diag1val = 0;
3970 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3971 u8 cb_idx;
3972
3973 /* Clear any existing interrupts */
3974 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3975
3976 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3977
3978 if (!ignore)
3979 return 0;
3980
3981 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3982 "address=%p\n", ioc->name, __func__,
3983 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3984 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3985 if (sleepFlag == CAN_SLEEP)
3986 msleep(1);
3987 else
3988 mdelay(1);
3989
3990 /*
3991 * Call each currently registered protocol IOC reset handler
3992 * with pre-reset indication.
3993 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3994 * MptResetHandlers[] registered yet.
3995 */
3996 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3997 if (MptResetHandlers[cb_idx])
3998 (*(MptResetHandlers[cb_idx]))(ioc,
3999 MPT_IOC_PRE_RESET);
4000 }
4001
4002 for (count = 0; count < 60; count ++) {
4003 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4004 doorbell &= MPI_IOC_STATE_MASK;
4005
4006 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4007 "looking for READY STATE: doorbell=%x"
4008 " count=%d\n",
4009 ioc->name, doorbell, count));
4010
4011 if (doorbell == MPI_IOC_STATE_READY) {
4012 return 1;
4013 }
4014
4015 /* wait 1 sec */
4016 if (sleepFlag == CAN_SLEEP)
4017 msleep(1000);
4018 else
4019 mdelay(1000);
4020 }
4021 return -1;
4022 }
4023
4024 /* Use "Diagnostic reset" method! (only thing available!) */
4025 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4026
4027 if (ioc->debug_level & MPT_DEBUG) {
4028 if (ioc->alt_ioc)
4029 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4030 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4031 ioc->name, diag0val, diag1val));
4032 }
4033
4034 /* Do the reset if we are told to ignore the reset history
4035 * or if the reset history is 0
4036 */
4037 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4038 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4039 /* Write magic sequence to WriteSequence register
4040 * Loop until in diagnostic mode
4041 */
4042 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4043 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4044 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4045 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4046 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4047 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4048
4049 /* wait 100 msec */
4050 if (sleepFlag == CAN_SLEEP) {
4051 msleep (100);
4052 } else {
4053 mdelay (100);
4054 }
4055
4056 count++;
4057 if (count > 20) {
4058 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4059 ioc->name, diag0val);
4060 return -2;
4061
4062 }
4063
4064 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4065
4066 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4067 ioc->name, diag0val));
4068 }
4069
4070 if (ioc->debug_level & MPT_DEBUG) {
4071 if (ioc->alt_ioc)
4072 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4073 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4074 ioc->name, diag0val, diag1val));
4075 }
4076 /*
4077 * Disable the ARM (Bug fix)
4078 *
4079 */
4080 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4081 mdelay(1);
4082
4083 /*
4084 * Now hit the reset bit in the Diagnostic register
4085 * (THE BIG HAMMER!) (Clears DRWE bit).
4086 */
4087 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4088 hard_reset_done = 1;
4089 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4090 ioc->name));
4091
4092 /*
4093 * Call each currently registered protocol IOC reset handler
4094 * with pre-reset indication.
4095 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4096 * MptResetHandlers[] registered yet.
4097 */
4098 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4099 if (MptResetHandlers[cb_idx]) {
4100 mpt_signal_reset(cb_idx,
4101 ioc, MPT_IOC_PRE_RESET);
4102 if (ioc->alt_ioc) {
4103 mpt_signal_reset(cb_idx,
4104 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4105 }
4106 }
4107 }
4108
4109 if (ioc->cached_fw)
4110 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4111 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4112 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4113 else
4114 cached_fw = NULL;
4115 if (cached_fw) {
4116 /* If the DownloadBoot operation fails, the
4117 * IOC will be left unusable. This is a fatal error
4118 * case. _diag_reset will return < 0
4119 */
4120 for (count = 0; count < 30; count ++) {
4121 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4122 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4123 break;
4124 }
4125
4126 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4127 ioc->name, diag0val, count));
4128 /* wait 1 sec */
4129 if (sleepFlag == CAN_SLEEP) {
4130 msleep (1000);
4131 } else {
4132 mdelay (1000);
4133 }
4134 }
4135 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4136 printk(MYIOC_s_WARN_FMT
4137 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4138 }
4139
4140 } else {
4141 /* Wait for FW to reload and for board
4142 * to go to the READY state.
4143 * Maximum wait is 60 seconds.
4144 * If fail, no error will check again
4145 * with calling program.
4146 */
4147 for (count = 0; count < 60; count ++) {
4148 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4149 doorbell &= MPI_IOC_STATE_MASK;
4150
4151 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4152 "looking for READY STATE: doorbell=%x"
4153 " count=%d\n", ioc->name, doorbell, count));
4154
4155 if (doorbell == MPI_IOC_STATE_READY) {
4156 break;
4157 }
4158
4159 /* wait 1 sec */
4160 if (sleepFlag == CAN_SLEEP) {
4161 msleep (1000);
4162 } else {
4163 mdelay (1000);
4164 }
4165 }
4166
4167 if (doorbell != MPI_IOC_STATE_READY)
4168 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4169 "after reset! IocState=%x", ioc->name,
4170 doorbell);
4171 }
4172 }
4173
4174 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4175 if (ioc->debug_level & MPT_DEBUG) {
4176 if (ioc->alt_ioc)
4177 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4178 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4179 ioc->name, diag0val, diag1val));
4180 }
4181
4182 /* Clear RESET_HISTORY bit! Place board in the
4183 * diagnostic mode to update the diag register.
4184 */
4185 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4186 count = 0;
4187 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4188 /* Write magic sequence to WriteSequence register
4189 * Loop until in diagnostic mode
4190 */
4191 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4192 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4193 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4194 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4195 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4196 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4197
4198 /* wait 100 msec */
4199 if (sleepFlag == CAN_SLEEP) {
4200 msleep (100);
4201 } else {
4202 mdelay (100);
4203 }
4204
4205 count++;
4206 if (count > 20) {
4207 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4208 ioc->name, diag0val);
4209 break;
4210 }
4211 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4212 }
4213 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4214 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4215 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4216 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4217 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4218 ioc->name);
4219 }
4220
4221 /* Disable Diagnostic Mode
4222 */
4223 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4224
4225 /* Check FW reload status flags.
4226 */
4227 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4228 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4229 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4230 ioc->name, diag0val);
4231 return -3;
4232 }
4233
4234 if (ioc->debug_level & MPT_DEBUG) {
4235 if (ioc->alt_ioc)
4236 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4237 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4238 ioc->name, diag0val, diag1val));
4239 }
4240
4241 /*
4242 * Reset flag that says we've enabled event notification
4243 */
4244 ioc->facts.EventState = 0;
4245
4246 if (ioc->alt_ioc)
4247 ioc->alt_ioc->facts.EventState = 0;
4248
4249 return hard_reset_done;
4250}
4251
4252/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4253/**
4254 * SendIocReset - Send IOCReset request to MPT adapter.
4255 * @ioc: Pointer to MPT_ADAPTER structure
4256 * @reset_type: reset type, expected values are
4257 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4258 * @sleepFlag: Specifies whether the process can sleep
4259 *
4260 * Send IOCReset request to the MPT adapter.
4261 *
4262 * Returns 0 for success, non-zero for failure.
4263 */
4264static int
4265SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4266{
4267 int r;
4268 u32 state;
4269 int cntdn, count;
4270
4271 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4272 ioc->name, reset_type));
4273 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4274 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4275 return r;
4276
4277 /* FW ACK'd request, wait for READY state
4278 */
4279 count = 0;
4280 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4281
4282 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4283 cntdn--;
4284 count++;
4285 if (!cntdn) {
4286 if (sleepFlag != CAN_SLEEP)
4287 count *= 10;
4288
4289 printk(MYIOC_s_ERR_FMT
4290 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4291 ioc->name, state, (int)((count+5)/HZ));
4292 return -ETIME;
4293 }
4294
4295 if (sleepFlag == CAN_SLEEP) {
4296 msleep(1);
4297 } else {
4298 mdelay (1); /* 1 msec delay */
4299 }
4300 }
4301
4302 /* TODO!
4303 * Cleanup all event stuff for this IOC; re-issue EventNotification
4304 * request if needed.
4305 */
4306 if (ioc->facts.Function)
4307 ioc->facts.EventState = 0;
4308
4309 return 0;
4310}
4311
4312/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4313/**
4314 * initChainBuffers - Allocate memory for and initialize chain buffers
4315 * @ioc: Pointer to MPT_ADAPTER structure
4316 *
4317 * Allocates memory for and initializes chain buffers,
4318 * chain buffer control arrays and spinlock.
4319 */
4320static int
4321initChainBuffers(MPT_ADAPTER *ioc)
4322{
4323 u8 *mem;
4324 int sz, ii, num_chain;
4325 int scale, num_sge, numSGE;
4326
4327 /* ReqToChain size must equal the req_depth
4328 * index = req_idx
4329 */
4330 if (ioc->ReqToChain == NULL) {
4331 sz = ioc->req_depth * sizeof(int);
4332 mem = kmalloc(sz, GFP_ATOMIC);
4333 if (mem == NULL)
4334 return -1;
4335
4336 ioc->ReqToChain = (int *) mem;
4337 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4338 ioc->name, mem, sz));
4339 mem = kmalloc(sz, GFP_ATOMIC);
4340 if (mem == NULL)
4341 return -1;
4342
4343 ioc->RequestNB = (int *) mem;
4344 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4345 ioc->name, mem, sz));
4346 }
4347 for (ii = 0; ii < ioc->req_depth; ii++) {
4348 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4349 }
4350
4351 /* ChainToChain size must equal the total number
4352 * of chain buffers to be allocated.
4353 * index = chain_idx
4354 *
4355 * Calculate the number of chain buffers needed(plus 1) per I/O
4356 * then multiply the maximum number of simultaneous cmds
4357 *
4358 * num_sge = num sge in request frame + last chain buffer
4359 * scale = num sge per chain buffer if no chain element
4360 */
4361 scale = ioc->req_sz / ioc->SGE_size;
4362 if (ioc->sg_addr_size == sizeof(u64))
4363 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4364 else
4365 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4366
4367 if (ioc->sg_addr_size == sizeof(u64)) {
4368 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4369 (ioc->req_sz - 60) / ioc->SGE_size;
4370 } else {
4371 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4372 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4373 }
4374 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4375 ioc->name, num_sge, numSGE));
4376
4377 if (ioc->bus_type == FC) {
4378 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4379 numSGE = MPT_SCSI_FC_SG_DEPTH;
4380 } else {
4381 if (numSGE > MPT_SCSI_SG_DEPTH)
4382 numSGE = MPT_SCSI_SG_DEPTH;
4383 }
4384
4385 num_chain = 1;
4386 while (numSGE - num_sge > 0) {
4387 num_chain++;
4388 num_sge += (scale - 1);
4389 }
4390 num_chain++;
4391
4392 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4393 ioc->name, numSGE, num_sge, num_chain));
4394
4395 if (ioc->bus_type == SPI)
4396 num_chain *= MPT_SCSI_CAN_QUEUE;
4397 else if (ioc->bus_type == SAS)
4398 num_chain *= MPT_SAS_CAN_QUEUE;
4399 else
4400 num_chain *= MPT_FC_CAN_QUEUE;
4401
4402 ioc->num_chain = num_chain;
4403
4404 sz = num_chain * sizeof(int);
4405 if (ioc->ChainToChain == NULL) {
4406 mem = kmalloc(sz, GFP_ATOMIC);
4407 if (mem == NULL)
4408 return -1;
4409
4410 ioc->ChainToChain = (int *) mem;
4411 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4412 ioc->name, mem, sz));
4413 } else {
4414 mem = (u8 *) ioc->ChainToChain;
4415 }
4416 memset(mem, 0xFF, sz);
4417 return num_chain;
4418}
4419
4420/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4421/**
4422 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4423 * @ioc: Pointer to MPT_ADAPTER structure
4424 *
4425 * This routine allocates memory for the MPT reply and request frame
4426 * pools (if necessary), and primes the IOC reply FIFO with
4427 * reply frames.
4428 *
4429 * Returns 0 for success, non-zero for failure.
4430 */
4431static int
4432PrimeIocFifos(MPT_ADAPTER *ioc)
4433{
4434 MPT_FRAME_HDR *mf;
4435 unsigned long flags;
4436 dma_addr_t alloc_dma;
4437 u8 *mem;
4438 int i, reply_sz, sz, total_size, num_chain;
4439 u64 dma_mask;
4440
4441 dma_mask = 0;
4442
4443 /* Prime reply FIFO... */
4444
4445 if (ioc->reply_frames == NULL) {
4446 if ( (num_chain = initChainBuffers(ioc)) < 0)
4447 return -1;
4448 /*
4449 * 1078 errata workaround for the 36GB limitation
4450 */
4451 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4452 ioc->dma_mask > DMA_BIT_MASK(35)) {
4453 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4454 && !pci_set_consistent_dma_mask(ioc->pcidev,
4455 DMA_BIT_MASK(32))) {
4456 dma_mask = DMA_BIT_MASK(35);
4457 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4458 "setting 35 bit addressing for "
4459 "Request/Reply/Chain and Sense Buffers\n",
4460 ioc->name));
4461 } else {
4462 /*Reseting DMA mask to 64 bit*/
4463 pci_set_dma_mask(ioc->pcidev,
4464 DMA_BIT_MASK(64));
4465 pci_set_consistent_dma_mask(ioc->pcidev,
4466 DMA_BIT_MASK(64));
4467
4468 printk(MYIOC_s_ERR_FMT
4469 "failed setting 35 bit addressing for "
4470 "Request/Reply/Chain and Sense Buffers\n",
4471 ioc->name);
4472 return -1;
4473 }
4474 }
4475
4476 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4477 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4478 ioc->name, ioc->reply_sz, ioc->reply_depth));
4479 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4480 ioc->name, reply_sz, reply_sz));
4481
4482 sz = (ioc->req_sz * ioc->req_depth);
4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4484 ioc->name, ioc->req_sz, ioc->req_depth));
4485 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4486 ioc->name, sz, sz));
4487 total_size += sz;
4488
4489 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4490 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4491 ioc->name, ioc->req_sz, num_chain));
4492 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4493 ioc->name, sz, sz, num_chain));
4494
4495 total_size += sz;
4496 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
4497 if (mem == NULL) {
4498 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4499 ioc->name);
4500 goto out_fail;
4501 }
4502
4503 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4504 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4505
4506 memset(mem, 0, total_size);
4507 ioc->alloc_total += total_size;
4508 ioc->alloc = mem;
4509 ioc->alloc_dma = alloc_dma;
4510 ioc->alloc_sz = total_size;
4511 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4512 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4513
4514 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4515 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4516
4517 alloc_dma += reply_sz;
4518 mem += reply_sz;
4519
4520 /* Request FIFO - WE manage this! */
4521
4522 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4523 ioc->req_frames_dma = alloc_dma;
4524
4525 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4526 ioc->name, mem, (void *)(ulong)alloc_dma));
4527
4528 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4529
4530 for (i = 0; i < ioc->req_depth; i++) {
4531 alloc_dma += ioc->req_sz;
4532 mem += ioc->req_sz;
4533 }
4534
4535 ioc->ChainBuffer = mem;
4536 ioc->ChainBufferDMA = alloc_dma;
4537
4538 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4539 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4540
4541 /* Initialize the free chain Q.
4542 */
4543
4544 INIT_LIST_HEAD(&ioc->FreeChainQ);
4545
4546 /* Post the chain buffers to the FreeChainQ.
4547 */
4548 mem = (u8 *)ioc->ChainBuffer;
4549 for (i=0; i < num_chain; i++) {
4550 mf = (MPT_FRAME_HDR *) mem;
4551 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4552 mem += ioc->req_sz;
4553 }
4554
4555 /* Initialize Request frames linked list
4556 */
4557 alloc_dma = ioc->req_frames_dma;
4558 mem = (u8 *) ioc->req_frames;
4559
4560 spin_lock_irqsave(&ioc->FreeQlock, flags);
4561 INIT_LIST_HEAD(&ioc->FreeQ);
4562 for (i = 0; i < ioc->req_depth; i++) {
4563 mf = (MPT_FRAME_HDR *) mem;
4564
4565 /* Queue REQUESTs *internally*! */
4566 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4567
4568 mem += ioc->req_sz;
4569 }
4570 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4571
4572 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4573 ioc->sense_buf_pool =
4574 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
4575 if (ioc->sense_buf_pool == NULL) {
4576 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4577 ioc->name);
4578 goto out_fail;
4579 }
4580
4581 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4582 ioc->alloc_total += sz;
4583 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4584 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4585
4586 }
4587
4588 /* Post Reply frames to FIFO
4589 */
4590 alloc_dma = ioc->alloc_dma;
4591 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4592 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4593
4594 for (i = 0; i < ioc->reply_depth; i++) {
4595 /* Write each address to the IOC! */
4596 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4597 alloc_dma += ioc->reply_sz;
4598 }
4599
4600 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4601 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4602 ioc->dma_mask))
4603 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4604 "restoring 64 bit addressing\n", ioc->name));
4605
4606 return 0;
4607
4608out_fail:
4609
4610 if (ioc->alloc != NULL) {
4611 sz = ioc->alloc_sz;
4612 pci_free_consistent(ioc->pcidev,
4613 sz,
4614 ioc->alloc, ioc->alloc_dma);
4615 ioc->reply_frames = NULL;
4616 ioc->req_frames = NULL;
4617 ioc->alloc_total -= sz;
4618 }
4619 if (ioc->sense_buf_pool != NULL) {
4620 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4621 pci_free_consistent(ioc->pcidev,
4622 sz,
4623 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
4624 ioc->sense_buf_pool = NULL;
4625 }
4626
4627 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4628 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4629 DMA_BIT_MASK(64)))
4630 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4631 "restoring 64 bit addressing\n", ioc->name));
4632
4633 return -1;
4634}
4635
4636/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4637/**
4638 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4639 * from IOC via doorbell handshake method.
4640 * @ioc: Pointer to MPT_ADAPTER structure
4641 * @reqBytes: Size of the request in bytes
4642 * @req: Pointer to MPT request frame
4643 * @replyBytes: Expected size of the reply in bytes
4644 * @u16reply: Pointer to area where reply should be written
4645 * @maxwait: Max wait time for a reply (in seconds)
4646 * @sleepFlag: Specifies whether the process can sleep
4647 *
4648 * NOTES: It is the callers responsibility to byte-swap fields in the
4649 * request which are greater than 1 byte in size. It is also the
4650 * callers responsibility to byte-swap response fields which are
4651 * greater than 1 byte in size.
4652 *
4653 * Returns 0 for success, non-zero for failure.
4654 */
4655static int
4656mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4657 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4658{
4659 MPIDefaultReply_t *mptReply;
4660 int failcnt = 0;
4661 int t;
4662
4663 /*
4664 * Get ready to cache a handshake reply
4665 */
4666 ioc->hs_reply_idx = 0;
4667 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4668 mptReply->MsgLength = 0;
4669
4670 /*
4671 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4672 * then tell IOC that we want to handshake a request of N words.
4673 * (WRITE u32val to Doorbell reg).
4674 */
4675 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4676 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4677 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4678 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4679
4680 /*
4681 * Wait for IOC's doorbell handshake int
4682 */
4683 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4684 failcnt++;
4685
4686 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4687 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4688
4689 /* Read doorbell and check for active bit */
4690 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4691 return -1;
4692
4693 /*
4694 * Clear doorbell int (WRITE 0 to IntStatus reg),
4695 * then wait for IOC to ACKnowledge that it's ready for
4696 * our handshake request.
4697 */
4698 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4699 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4700 failcnt++;
4701
4702 if (!failcnt) {
4703 int ii;
4704 u8 *req_as_bytes = (u8 *) req;
4705
4706 /*
4707 * Stuff request words via doorbell handshake,
4708 * with ACK from IOC for each.
4709 */
4710 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4711 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4712 (req_as_bytes[(ii*4) + 1] << 8) |
4713 (req_as_bytes[(ii*4) + 2] << 16) |
4714 (req_as_bytes[(ii*4) + 3] << 24));
4715
4716 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4717 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4718 failcnt++;
4719 }
4720
4721 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4722 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4723
4724 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4725 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4726
4727 /*
4728 * Wait for completion of doorbell handshake reply from the IOC
4729 */
4730 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4731 failcnt++;
4732
4733 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4734 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4735
4736 /*
4737 * Copy out the cached reply...
4738 */
4739 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4740 u16reply[ii] = ioc->hs_reply[ii];
4741 } else {
4742 return -99;
4743 }
4744
4745 return -failcnt;
4746}
4747
4748/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4749/**
4750 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4751 * @ioc: Pointer to MPT_ADAPTER structure
4752 * @howlong: How long to wait (in seconds)
4753 * @sleepFlag: Specifies whether the process can sleep
4754 *
4755 * This routine waits (up to ~2 seconds max) for IOC doorbell
4756 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4757 * bit in its IntStatus register being clear.
4758 *
4759 * Returns a negative value on failure, else wait loop count.
4760 */
4761static int
4762WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4763{
4764 int cntdn;
4765 int count = 0;
4766 u32 intstat=0;
4767
4768 cntdn = 1000 * howlong;
4769
4770 if (sleepFlag == CAN_SLEEP) {
4771 while (--cntdn) {
4772 msleep (1);
4773 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4774 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4775 break;
4776 count++;
4777 }
4778 } else {
4779 while (--cntdn) {
4780 udelay (1000);
4781 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4782 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4783 break;
4784 count++;
4785 }
4786 }
4787
4788 if (cntdn) {
4789 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4790 ioc->name, count));
4791 return count;
4792 }
4793
4794 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4795 ioc->name, count, intstat);
4796 return -1;
4797}
4798
4799/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4800/**
4801 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4802 * @ioc: Pointer to MPT_ADAPTER structure
4803 * @howlong: How long to wait (in seconds)
4804 * @sleepFlag: Specifies whether the process can sleep
4805 *
4806 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4807 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4808 *
4809 * Returns a negative value on failure, else wait loop count.
4810 */
4811static int
4812WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4813{
4814 int cntdn;
4815 int count = 0;
4816 u32 intstat=0;
4817
4818 cntdn = 1000 * howlong;
4819 if (sleepFlag == CAN_SLEEP) {
4820 while (--cntdn) {
4821 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4822 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4823 break;
4824 msleep(1);
4825 count++;
4826 }
4827 } else {
4828 while (--cntdn) {
4829 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4830 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4831 break;
4832 udelay (1000);
4833 count++;
4834 }
4835 }
4836
4837 if (cntdn) {
4838 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4839 ioc->name, count, howlong));
4840 return count;
4841 }
4842
4843 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4844 ioc->name, count, intstat);
4845 return -1;
4846}
4847
4848/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4849/**
4850 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4851 * @ioc: Pointer to MPT_ADAPTER structure
4852 * @howlong: How long to wait (in seconds)
4853 * @sleepFlag: Specifies whether the process can sleep
4854 *
4855 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4856 * Reply is cached to IOC private area large enough to hold a maximum
4857 * of 128 bytes of reply data.
4858 *
4859 * Returns a negative value on failure, else size of reply in WORDS.
4860 */
4861static int
4862WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4863{
4864 int u16cnt = 0;
4865 int failcnt = 0;
4866 int t;
4867 u16 *hs_reply = ioc->hs_reply;
4868 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4869 u16 hword;
4870
4871 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4872
4873 /*
4874 * Get first two u16's so we can look at IOC's intended reply MsgLength
4875 */
4876 u16cnt=0;
4877 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4878 failcnt++;
4879 } else {
4880 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4881 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4882 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4883 failcnt++;
4884 else {
4885 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4886 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4887 }
4888 }
4889
4890 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4891 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4892 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4893
4894 /*
4895 * If no error (and IOC said MsgLength is > 0), piece together
4896 * reply 16 bits at a time.
4897 */
4898 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4899 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4900 failcnt++;
4901 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4902 /* don't overflow our IOC hs_reply[] buffer! */
4903 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4904 hs_reply[u16cnt] = hword;
4905 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4906 }
4907
4908 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4909 failcnt++;
4910 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4911
4912 if (failcnt) {
4913 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4914 ioc->name);
4915 return -failcnt;
4916 }
4917#if 0
4918 else if (u16cnt != (2 * mptReply->MsgLength)) {
4919 return -101;
4920 }
4921 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4922 return -102;
4923 }
4924#endif
4925
4926 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4927 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4928
4929 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4930 ioc->name, t, u16cnt/2));
4931 return u16cnt/2;
4932}
4933
4934/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4935/**
4936 * GetLanConfigPages - Fetch LANConfig pages.
4937 * @ioc: Pointer to MPT_ADAPTER structure
4938 *
4939 * Return: 0 for success
4940 * -ENOMEM if no memory available
4941 * -EPERM if not allowed due to ISR context
4942 * -EAGAIN if no msg frames currently available
4943 * -EFAULT for non-successful reply or no reply (timeout)
4944 */
4945static int
4946GetLanConfigPages(MPT_ADAPTER *ioc)
4947{
4948 ConfigPageHeader_t hdr;
4949 CONFIGPARMS cfg;
4950 LANPage0_t *ppage0_alloc;
4951 dma_addr_t page0_dma;
4952 LANPage1_t *ppage1_alloc;
4953 dma_addr_t page1_dma;
4954 int rc = 0;
4955 int data_sz;
4956 int copy_sz;
4957
4958 /* Get LAN Page 0 header */
4959 hdr.PageVersion = 0;
4960 hdr.PageLength = 0;
4961 hdr.PageNumber = 0;
4962 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4963 cfg.cfghdr.hdr = &hdr;
4964 cfg.physAddr = -1;
4965 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4966 cfg.dir = 0;
4967 cfg.pageAddr = 0;
4968 cfg.timeout = 0;
4969
4970 if ((rc = mpt_config(ioc, &cfg)) != 0)
4971 return rc;
4972
4973 if (hdr.PageLength > 0) {
4974 data_sz = hdr.PageLength * 4;
4975 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4976 rc = -ENOMEM;
4977 if (ppage0_alloc) {
4978 memset((u8 *)ppage0_alloc, 0, data_sz);
4979 cfg.physAddr = page0_dma;
4980 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4981
4982 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4983 /* save the data */
4984 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4985 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4986
4987 }
4988
4989 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4990
4991 /* FIXME!
4992 * Normalize endianness of structure data,
4993 * by byte-swapping all > 1 byte fields!
4994 */
4995
4996 }
4997
4998 if (rc)
4999 return rc;
5000 }
5001
5002 /* Get LAN Page 1 header */
5003 hdr.PageVersion = 0;
5004 hdr.PageLength = 0;
5005 hdr.PageNumber = 1;
5006 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5007 cfg.cfghdr.hdr = &hdr;
5008 cfg.physAddr = -1;
5009 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5010 cfg.dir = 0;
5011 cfg.pageAddr = 0;
5012
5013 if ((rc = mpt_config(ioc, &cfg)) != 0)
5014 return rc;
5015
5016 if (hdr.PageLength == 0)
5017 return 0;
5018
5019 data_sz = hdr.PageLength * 4;
5020 rc = -ENOMEM;
5021 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5022 if (ppage1_alloc) {
5023 memset((u8 *)ppage1_alloc, 0, data_sz);
5024 cfg.physAddr = page1_dma;
5025 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5026
5027 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5028 /* save the data */
5029 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5030 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5031 }
5032
5033 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5034
5035 /* FIXME!
5036 * Normalize endianness of structure data,
5037 * by byte-swapping all > 1 byte fields!
5038 */
5039
5040 }
5041
5042 return rc;
5043}
5044
5045/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5046/**
5047 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5048 * @ioc: Pointer to MPT_ADAPTER structure
5049 * @persist_opcode: see below
5050 *
5051 * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
5052 * devices not currently present.
5053 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
5054 *
5055 * NOTE: Don't use not this function during interrupt time.
5056 *
5057 * Returns 0 for success, non-zero error
5058 */
5059
5060/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5061int
5062mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5063{
5064 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5065 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5066 MPT_FRAME_HDR *mf = NULL;
5067 MPIHeader_t *mpi_hdr;
5068 int ret = 0;
5069 unsigned long timeleft;
5070
5071 mutex_lock(&ioc->mptbase_cmds.mutex);
5072
5073 /* init the internal cmd struct */
5074 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5075 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5076
5077 /* insure garbage is not sent to fw */
5078 switch(persist_opcode) {
5079
5080 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5081 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5082 break;
5083
5084 default:
5085 ret = -1;
5086 goto out;
5087 }
5088
5089 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5090 __func__, persist_opcode);
5091
5092 /* Get a MF for this command.
5093 */
5094 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5095 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5096 ret = -1;
5097 goto out;
5098 }
5099
5100 mpi_hdr = (MPIHeader_t *) mf;
5101 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5102 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5103 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5104 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5105 sasIoUnitCntrReq->Operation = persist_opcode;
5106
5107 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5108 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5109 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5110 ret = -ETIME;
5111 printk(KERN_DEBUG "%s: failed\n", __func__);
5112 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5113 goto out;
5114 if (!timeleft) {
5115 printk(MYIOC_s_WARN_FMT
5116 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5117 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5118 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5119 mpt_free_msg_frame(ioc, mf);
5120 }
5121 goto out;
5122 }
5123
5124 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5125 ret = -1;
5126 goto out;
5127 }
5128
5129 sasIoUnitCntrReply =
5130 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5131 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5132 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5133 __func__, sasIoUnitCntrReply->IOCStatus,
5134 sasIoUnitCntrReply->IOCLogInfo);
5135 printk(KERN_DEBUG "%s: failed\n", __func__);
5136 ret = -1;
5137 } else
5138 printk(KERN_DEBUG "%s: success\n", __func__);
5139 out:
5140
5141 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5142 mutex_unlock(&ioc->mptbase_cmds.mutex);
5143 return ret;
5144}
5145
5146/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5147
5148static void
5149mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5150 MpiEventDataRaid_t * pRaidEventData)
5151{
5152 int volume;
5153 int reason;
5154 int disk;
5155 int status;
5156 int flags;
5157 int state;
5158
5159 volume = pRaidEventData->VolumeID;
5160 reason = pRaidEventData->ReasonCode;
5161 disk = pRaidEventData->PhysDiskNum;
5162 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5163 flags = (status >> 0) & 0xff;
5164 state = (status >> 8) & 0xff;
5165
5166 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5167 return;
5168 }
5169
5170 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5171 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5172 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5173 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5174 ioc->name, disk, volume);
5175 } else {
5176 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5177 ioc->name, volume);
5178 }
5179
5180 switch(reason) {
5181 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5182 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5183 ioc->name);
5184 break;
5185
5186 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5187
5188 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5189 ioc->name);
5190 break;
5191
5192 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5193 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5194 ioc->name);
5195 break;
5196
5197 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5198 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5199 ioc->name,
5200 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5201 ? "optimal"
5202 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5203 ? "degraded"
5204 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5205 ? "failed"
5206 : "state unknown",
5207 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5208 ? ", enabled" : "",
5209 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5210 ? ", quiesced" : "",
5211 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5212 ? ", resync in progress" : "" );
5213 break;
5214
5215 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5216 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5217 ioc->name, disk);
5218 break;
5219
5220 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5221 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5222 ioc->name);
5223 break;
5224
5225 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5226 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5227 ioc->name);
5228 break;
5229
5230 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5231 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5232 ioc->name);
5233 break;
5234
5235 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5236 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5237 ioc->name,
5238 state == MPI_PHYSDISK0_STATUS_ONLINE
5239 ? "online"
5240 : state == MPI_PHYSDISK0_STATUS_MISSING
5241 ? "missing"
5242 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5243 ? "not compatible"
5244 : state == MPI_PHYSDISK0_STATUS_FAILED
5245 ? "failed"
5246 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5247 ? "initializing"
5248 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5249 ? "offline requested"
5250 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5251 ? "failed requested"
5252 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5253 ? "offline"
5254 : "state unknown",
5255 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5256 ? ", out of sync" : "",
5257 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5258 ? ", quiesced" : "" );
5259 break;
5260
5261 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5262 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5263 ioc->name, disk);
5264 break;
5265
5266 case MPI_EVENT_RAID_RC_SMART_DATA:
5267 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5268 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5269 break;
5270
5271 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5272 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5273 ioc->name, disk);
5274 break;
5275 }
5276}
5277
5278/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5279/**
5280 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5281 * @ioc: Pointer to MPT_ADAPTER structure
5282 *
5283 * Returns: 0 for success
5284 * -ENOMEM if no memory available
5285 * -EPERM if not allowed due to ISR context
5286 * -EAGAIN if no msg frames currently available
5287 * -EFAULT for non-successful reply or no reply (timeout)
5288 */
5289static int
5290GetIoUnitPage2(MPT_ADAPTER *ioc)
5291{
5292 ConfigPageHeader_t hdr;
5293 CONFIGPARMS cfg;
5294 IOUnitPage2_t *ppage_alloc;
5295 dma_addr_t page_dma;
5296 int data_sz;
5297 int rc;
5298
5299 /* Get the page header */
5300 hdr.PageVersion = 0;
5301 hdr.PageLength = 0;
5302 hdr.PageNumber = 2;
5303 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5304 cfg.cfghdr.hdr = &hdr;
5305 cfg.physAddr = -1;
5306 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5307 cfg.dir = 0;
5308 cfg.pageAddr = 0;
5309 cfg.timeout = 0;
5310
5311 if ((rc = mpt_config(ioc, &cfg)) != 0)
5312 return rc;
5313
5314 if (hdr.PageLength == 0)
5315 return 0;
5316
5317 /* Read the config page */
5318 data_sz = hdr.PageLength * 4;
5319 rc = -ENOMEM;
5320 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5321 if (ppage_alloc) {
5322 memset((u8 *)ppage_alloc, 0, data_sz);
5323 cfg.physAddr = page_dma;
5324 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5325
5326 /* If Good, save data */
5327 if ((rc = mpt_config(ioc, &cfg)) == 0)
5328 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5329
5330 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5331 }
5332
5333 return rc;
5334}
5335
5336/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5337/**
5338 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5339 * @ioc: Pointer to a Adapter Strucutre
5340 * @portnum: IOC port number
5341 *
5342 * Return: -EFAULT if read of config page header fails
5343 * or if no nvram
5344 * If read of SCSI Port Page 0 fails,
5345 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5346 * Adapter settings: async, narrow
5347 * Return 1
5348 * If read of SCSI Port Page 2 fails,
5349 * Adapter settings valid
5350 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5351 * Return 1
5352 * Else
5353 * Both valid
5354 * Return 0
5355 * CHECK - what type of locking mechanisms should be used????
5356 */
5357static int
5358mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5359{
5360 u8 *pbuf;
5361 dma_addr_t buf_dma;
5362 CONFIGPARMS cfg;
5363 ConfigPageHeader_t header;
5364 int ii;
5365 int data, rc = 0;
5366
5367 /* Allocate memory
5368 */
5369 if (!ioc->spi_data.nvram) {
5370 int sz;
5371 u8 *mem;
5372 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5373 mem = kmalloc(sz, GFP_ATOMIC);
5374 if (mem == NULL)
5375 return -EFAULT;
5376
5377 ioc->spi_data.nvram = (int *) mem;
5378
5379 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5380 ioc->name, ioc->spi_data.nvram, sz));
5381 }
5382
5383 /* Invalidate NVRAM information
5384 */
5385 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5386 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5387 }
5388
5389 /* Read SPP0 header, allocate memory, then read page.
5390 */
5391 header.PageVersion = 0;
5392 header.PageLength = 0;
5393 header.PageNumber = 0;
5394 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5395 cfg.cfghdr.hdr = &header;
5396 cfg.physAddr = -1;
5397 cfg.pageAddr = portnum;
5398 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5399 cfg.dir = 0;
5400 cfg.timeout = 0; /* use default */
5401 if (mpt_config(ioc, &cfg) != 0)
5402 return -EFAULT;
5403
5404 if (header.PageLength > 0) {
5405 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5406 if (pbuf) {
5407 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5408 cfg.physAddr = buf_dma;
5409 if (mpt_config(ioc, &cfg) != 0) {
5410 ioc->spi_data.maxBusWidth = MPT_NARROW;
5411 ioc->spi_data.maxSyncOffset = 0;
5412 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5413 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5414 rc = 1;
5415 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5416 "Unable to read PortPage0 minSyncFactor=%x\n",
5417 ioc->name, ioc->spi_data.minSyncFactor));
5418 } else {
5419 /* Save the Port Page 0 data
5420 */
5421 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5422 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5423 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5424
5425 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5426 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5427 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5428 "noQas due to Capabilities=%x\n",
5429 ioc->name, pPP0->Capabilities));
5430 }
5431 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5432 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5433 if (data) {
5434 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5435 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5436 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5437 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5438 "PortPage0 minSyncFactor=%x\n",
5439 ioc->name, ioc->spi_data.minSyncFactor));
5440 } else {
5441 ioc->spi_data.maxSyncOffset = 0;
5442 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5443 }
5444
5445 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5446
5447 /* Update the minSyncFactor based on bus type.
5448 */
5449 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5450 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5451
5452 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5453 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5454 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5455 "HVD or SE detected, minSyncFactor=%x\n",
5456 ioc->name, ioc->spi_data.minSyncFactor));
5457 }
5458 }
5459 }
5460 if (pbuf) {
5461 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5462 }
5463 }
5464 }
5465
5466 /* SCSI Port Page 2 - Read the header then the page.
5467 */
5468 header.PageVersion = 0;
5469 header.PageLength = 0;
5470 header.PageNumber = 2;
5471 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5472 cfg.cfghdr.hdr = &header;
5473 cfg.physAddr = -1;
5474 cfg.pageAddr = portnum;
5475 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5476 cfg.dir = 0;
5477 if (mpt_config(ioc, &cfg) != 0)
5478 return -EFAULT;
5479
5480 if (header.PageLength > 0) {
5481 /* Allocate memory and read SCSI Port Page 2
5482 */
5483 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5484 if (pbuf) {
5485 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5486 cfg.physAddr = buf_dma;
5487 if (mpt_config(ioc, &cfg) != 0) {
5488 /* Nvram data is left with INVALID mark
5489 */
5490 rc = 1;
5491 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5492
5493 /* This is an ATTO adapter, read Page2 accordingly
5494 */
5495 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5496 ATTODeviceInfo_t *pdevice = NULL;
5497 u16 ATTOFlags;
5498
5499 /* Save the Port Page 2 data
5500 * (reformat into a 32bit quantity)
5501 */
5502 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5503 pdevice = &pPP2->DeviceSettings[ii];
5504 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5505 data = 0;
5506
5507 /* Translate ATTO device flags to LSI format
5508 */
5509 if (ATTOFlags & ATTOFLAG_DISC)
5510 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5511 if (ATTOFlags & ATTOFLAG_ID_ENB)
5512 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5513 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5514 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5515 if (ATTOFlags & ATTOFLAG_TAGGED)
5516 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5517 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5518 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5519
5520 data = (data << 16) | (pdevice->Period << 8) | 10;
5521 ioc->spi_data.nvram[ii] = data;
5522 }
5523 } else {
5524 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5525 MpiDeviceInfo_t *pdevice = NULL;
5526
5527 /*
5528 * Save "Set to Avoid SCSI Bus Resets" flag
5529 */
5530 ioc->spi_data.bus_reset =
5531 (le32_to_cpu(pPP2->PortFlags) &
5532 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5533 0 : 1 ;
5534
5535 /* Save the Port Page 2 data
5536 * (reformat into a 32bit quantity)
5537 */
5538 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5539 ioc->spi_data.PortFlags = data;
5540 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5541 pdevice = &pPP2->DeviceSettings[ii];
5542 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5543 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5544 ioc->spi_data.nvram[ii] = data;
5545 }
5546 }
5547
5548 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5549 }
5550 }
5551
5552 /* Update Adapter limits with those from NVRAM
5553 * Comment: Don't need to do this. Target performance
5554 * parameters will never exceed the adapters limits.
5555 */
5556
5557 return rc;
5558}
5559
5560/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5561/**
5562 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5563 * @ioc: Pointer to a Adapter Strucutre
5564 * @portnum: IOC port number
5565 *
5566 * Return: -EFAULT if read of config page header fails
5567 * or 0 if success.
5568 */
5569static int
5570mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5571{
5572 CONFIGPARMS cfg;
5573 ConfigPageHeader_t header;
5574
5575 /* Read the SCSI Device Page 1 header
5576 */
5577 header.PageVersion = 0;
5578 header.PageLength = 0;
5579 header.PageNumber = 1;
5580 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5581 cfg.cfghdr.hdr = &header;
5582 cfg.physAddr = -1;
5583 cfg.pageAddr = portnum;
5584 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5585 cfg.dir = 0;
5586 cfg.timeout = 0;
5587 if (mpt_config(ioc, &cfg) != 0)
5588 return -EFAULT;
5589
5590 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5591 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5592
5593 header.PageVersion = 0;
5594 header.PageLength = 0;
5595 header.PageNumber = 0;
5596 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5597 if (mpt_config(ioc, &cfg) != 0)
5598 return -EFAULT;
5599
5600 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5601 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5602
5603 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5604 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5605
5606 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5607 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5608 return 0;
5609}
5610
5611/**
5612 * mpt_inactive_raid_list_free - This clears this link list.
5613 * @ioc : pointer to per adapter structure
5614 **/
5615static void
5616mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5617{
5618 struct inactive_raid_component_info *component_info, *pNext;
5619
5620 if (list_empty(&ioc->raid_data.inactive_list))
5621 return;
5622
5623 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5624 list_for_each_entry_safe(component_info, pNext,
5625 &ioc->raid_data.inactive_list, list) {
5626 list_del(&component_info->list);
5627 kfree(component_info);
5628 }
5629 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5630}
5631
5632/**
5633 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5634 *
5635 * @ioc : pointer to per adapter structure
5636 * @channel : volume channel
5637 * @id : volume target id
5638 **/
5639static void
5640mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5641{
5642 CONFIGPARMS cfg;
5643 ConfigPageHeader_t hdr;
5644 dma_addr_t dma_handle;
5645 pRaidVolumePage0_t buffer = NULL;
5646 int i;
5647 RaidPhysDiskPage0_t phys_disk;
5648 struct inactive_raid_component_info *component_info;
5649 int handle_inactive_volumes;
5650
5651 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5652 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5653 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5654 cfg.pageAddr = (channel << 8) + id;
5655 cfg.cfghdr.hdr = &hdr;
5656 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5657
5658 if (mpt_config(ioc, &cfg) != 0)
5659 goto out;
5660
5661 if (!hdr.PageLength)
5662 goto out;
5663
5664 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5665 &dma_handle);
5666
5667 if (!buffer)
5668 goto out;
5669
5670 cfg.physAddr = dma_handle;
5671 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5672
5673 if (mpt_config(ioc, &cfg) != 0)
5674 goto out;
5675
5676 if (!buffer->NumPhysDisks)
5677 goto out;
5678
5679 handle_inactive_volumes =
5680 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5681 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5682 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5683 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5684
5685 if (!handle_inactive_volumes)
5686 goto out;
5687
5688 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5689 for (i = 0; i < buffer->NumPhysDisks; i++) {
5690 if(mpt_raid_phys_disk_pg0(ioc,
5691 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5692 continue;
5693
5694 if ((component_info = kmalloc(sizeof (*component_info),
5695 GFP_KERNEL)) == NULL)
5696 continue;
5697
5698 component_info->volumeID = id;
5699 component_info->volumeBus = channel;
5700 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5701 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5702 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5703 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5704
5705 list_add_tail(&component_info->list,
5706 &ioc->raid_data.inactive_list);
5707 }
5708 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5709
5710 out:
5711 if (buffer)
5712 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5713 dma_handle);
5714}
5715
5716/**
5717 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5718 * @ioc: Pointer to a Adapter Structure
5719 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5720 * @phys_disk: requested payload data returned
5721 *
5722 * Return:
5723 * 0 on success
5724 * -EFAULT if read of config page header fails or data pointer not NULL
5725 * -ENOMEM if pci_alloc failed
5726 **/
5727int
5728mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5729 RaidPhysDiskPage0_t *phys_disk)
5730{
5731 CONFIGPARMS cfg;
5732 ConfigPageHeader_t hdr;
5733 dma_addr_t dma_handle;
5734 pRaidPhysDiskPage0_t buffer = NULL;
5735 int rc;
5736
5737 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5738 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5739 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5740
5741 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5742 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5743 cfg.cfghdr.hdr = &hdr;
5744 cfg.physAddr = -1;
5745 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5746
5747 if (mpt_config(ioc, &cfg) != 0) {
5748 rc = -EFAULT;
5749 goto out;
5750 }
5751
5752 if (!hdr.PageLength) {
5753 rc = -EFAULT;
5754 goto out;
5755 }
5756
5757 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5758 &dma_handle);
5759
5760 if (!buffer) {
5761 rc = -ENOMEM;
5762 goto out;
5763 }
5764
5765 cfg.physAddr = dma_handle;
5766 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5767 cfg.pageAddr = phys_disk_num;
5768
5769 if (mpt_config(ioc, &cfg) != 0) {
5770 rc = -EFAULT;
5771 goto out;
5772 }
5773
5774 rc = 0;
5775 memcpy(phys_disk, buffer, sizeof(*buffer));
5776 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5777
5778 out:
5779
5780 if (buffer)
5781 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5782 dma_handle);
5783
5784 return rc;
5785}
5786
5787/**
5788 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5789 * @ioc: Pointer to a Adapter Structure
5790 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5791 *
5792 * Return:
5793 * returns number paths
5794 **/
5795int
5796mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5797{
5798 CONFIGPARMS cfg;
5799 ConfigPageHeader_t hdr;
5800 dma_addr_t dma_handle;
5801 pRaidPhysDiskPage1_t buffer = NULL;
5802 int rc;
5803
5804 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5805 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5806
5807 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5808 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5809 hdr.PageNumber = 1;
5810 cfg.cfghdr.hdr = &hdr;
5811 cfg.physAddr = -1;
5812 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5813
5814 if (mpt_config(ioc, &cfg) != 0) {
5815 rc = 0;
5816 goto out;
5817 }
5818
5819 if (!hdr.PageLength) {
5820 rc = 0;
5821 goto out;
5822 }
5823
5824 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5825 &dma_handle);
5826
5827 if (!buffer) {
5828 rc = 0;
5829 goto out;
5830 }
5831
5832 cfg.physAddr = dma_handle;
5833 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5834 cfg.pageAddr = phys_disk_num;
5835
5836 if (mpt_config(ioc, &cfg) != 0) {
5837 rc = 0;
5838 goto out;
5839 }
5840
5841 rc = buffer->NumPhysDiskPaths;
5842 out:
5843
5844 if (buffer)
5845 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5846 dma_handle);
5847
5848 return rc;
5849}
5850EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5851
5852/**
5853 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5854 * @ioc: Pointer to a Adapter Structure
5855 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5856 * @phys_disk: requested payload data returned
5857 *
5858 * Return:
5859 * 0 on success
5860 * -EFAULT if read of config page header fails or data pointer not NULL
5861 * -ENOMEM if pci_alloc failed
5862 **/
5863int
5864mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5865 RaidPhysDiskPage1_t *phys_disk)
5866{
5867 CONFIGPARMS cfg;
5868 ConfigPageHeader_t hdr;
5869 dma_addr_t dma_handle;
5870 pRaidPhysDiskPage1_t buffer = NULL;
5871 int rc;
5872 int i;
5873 __le64 sas_address;
5874
5875 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5876 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5877 rc = 0;
5878
5879 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5880 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5881 hdr.PageNumber = 1;
5882 cfg.cfghdr.hdr = &hdr;
5883 cfg.physAddr = -1;
5884 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5885
5886 if (mpt_config(ioc, &cfg) != 0) {
5887 rc = -EFAULT;
5888 goto out;
5889 }
5890
5891 if (!hdr.PageLength) {
5892 rc = -EFAULT;
5893 goto out;
5894 }
5895
5896 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5897 &dma_handle);
5898
5899 if (!buffer) {
5900 rc = -ENOMEM;
5901 goto out;
5902 }
5903
5904 cfg.physAddr = dma_handle;
5905 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5906 cfg.pageAddr = phys_disk_num;
5907
5908 if (mpt_config(ioc, &cfg) != 0) {
5909 rc = -EFAULT;
5910 goto out;
5911 }
5912
5913 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5914 phys_disk->PhysDiskNum = phys_disk_num;
5915 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5916 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5917 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5918 phys_disk->Path[i].OwnerIdentifier =
5919 buffer->Path[i].OwnerIdentifier;
5920 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5921 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5922 sas_address = le64_to_cpu(sas_address);
5923 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5924 memcpy(&sas_address,
5925 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5926 sas_address = le64_to_cpu(sas_address);
5927 memcpy(&phys_disk->Path[i].OwnerWWID,
5928 &sas_address, sizeof(__le64));
5929 }
5930
5931 out:
5932
5933 if (buffer)
5934 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5935 dma_handle);
5936
5937 return rc;
5938}
5939EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5940
5941
5942/**
5943 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5944 * @ioc: Pointer to a Adapter Strucutre
5945 *
5946 * Return:
5947 * 0 on success
5948 * -EFAULT if read of config page header fails or data pointer not NULL
5949 * -ENOMEM if pci_alloc failed
5950 **/
5951int
5952mpt_findImVolumes(MPT_ADAPTER *ioc)
5953{
5954 IOCPage2_t *pIoc2;
5955 u8 *mem;
5956 dma_addr_t ioc2_dma;
5957 CONFIGPARMS cfg;
5958 ConfigPageHeader_t header;
5959 int rc = 0;
5960 int iocpage2sz;
5961 int i;
5962
5963 if (!ioc->ir_firmware)
5964 return 0;
5965
5966 /* Free the old page
5967 */
5968 kfree(ioc->raid_data.pIocPg2);
5969 ioc->raid_data.pIocPg2 = NULL;
5970 mpt_inactive_raid_list_free(ioc);
5971
5972 /* Read IOCP2 header then the page.
5973 */
5974 header.PageVersion = 0;
5975 header.PageLength = 0;
5976 header.PageNumber = 2;
5977 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5978 cfg.cfghdr.hdr = &header;
5979 cfg.physAddr = -1;
5980 cfg.pageAddr = 0;
5981 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5982 cfg.dir = 0;
5983 cfg.timeout = 0;
5984 if (mpt_config(ioc, &cfg) != 0)
5985 return -EFAULT;
5986
5987 if (header.PageLength == 0)
5988 return -EFAULT;
5989
5990 iocpage2sz = header.PageLength * 4;
5991 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5992 if (!pIoc2)
5993 return -ENOMEM;
5994
5995 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5996 cfg.physAddr = ioc2_dma;
5997 if (mpt_config(ioc, &cfg) != 0)
5998 goto out;
5999
6000 mem = kmalloc(iocpage2sz, GFP_KERNEL);
6001 if (!mem) {
6002 rc = -ENOMEM;
6003 goto out;
6004 }
6005
6006 memcpy(mem, (u8 *)pIoc2, iocpage2sz);
6007 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6008
6009 mpt_read_ioc_pg_3(ioc);
6010
6011 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6012 mpt_inactive_raid_volumes(ioc,
6013 pIoc2->RaidVolume[i].VolumeBus,
6014 pIoc2->RaidVolume[i].VolumeID);
6015
6016 out:
6017 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6018
6019 return rc;
6020}
6021
6022static int
6023mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6024{
6025 IOCPage3_t *pIoc3;
6026 u8 *mem;
6027 CONFIGPARMS cfg;
6028 ConfigPageHeader_t header;
6029 dma_addr_t ioc3_dma;
6030 int iocpage3sz = 0;
6031
6032 /* Free the old page
6033 */
6034 kfree(ioc->raid_data.pIocPg3);
6035 ioc->raid_data.pIocPg3 = NULL;
6036
6037 /* There is at least one physical disk.
6038 * Read and save IOC Page 3
6039 */
6040 header.PageVersion = 0;
6041 header.PageLength = 0;
6042 header.PageNumber = 3;
6043 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6044 cfg.cfghdr.hdr = &header;
6045 cfg.physAddr = -1;
6046 cfg.pageAddr = 0;
6047 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6048 cfg.dir = 0;
6049 cfg.timeout = 0;
6050 if (mpt_config(ioc, &cfg) != 0)
6051 return 0;
6052
6053 if (header.PageLength == 0)
6054 return 0;
6055
6056 /* Read Header good, alloc memory
6057 */
6058 iocpage3sz = header.PageLength * 4;
6059 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6060 if (!pIoc3)
6061 return 0;
6062
6063 /* Read the Page and save the data
6064 * into malloc'd memory.
6065 */
6066 cfg.physAddr = ioc3_dma;
6067 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6068 if (mpt_config(ioc, &cfg) == 0) {
6069 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6070 if (mem) {
6071 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6072 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6073 }
6074 }
6075
6076 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6077
6078 return 0;
6079}
6080
6081static void
6082mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6083{
6084 IOCPage4_t *pIoc4;
6085 CONFIGPARMS cfg;
6086 ConfigPageHeader_t header;
6087 dma_addr_t ioc4_dma;
6088 int iocpage4sz;
6089
6090 /* Read and save IOC Page 4
6091 */
6092 header.PageVersion = 0;
6093 header.PageLength = 0;
6094 header.PageNumber = 4;
6095 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6096 cfg.cfghdr.hdr = &header;
6097 cfg.physAddr = -1;
6098 cfg.pageAddr = 0;
6099 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6100 cfg.dir = 0;
6101 cfg.timeout = 0;
6102 if (mpt_config(ioc, &cfg) != 0)
6103 return;
6104
6105 if (header.PageLength == 0)
6106 return;
6107
6108 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6109 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6110 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6111 if (!pIoc4)
6112 return;
6113 ioc->alloc_total += iocpage4sz;
6114 } else {
6115 ioc4_dma = ioc->spi_data.IocPg4_dma;
6116 iocpage4sz = ioc->spi_data.IocPg4Sz;
6117 }
6118
6119 /* Read the Page into dma memory.
6120 */
6121 cfg.physAddr = ioc4_dma;
6122 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6123 if (mpt_config(ioc, &cfg) == 0) {
6124 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6125 ioc->spi_data.IocPg4_dma = ioc4_dma;
6126 ioc->spi_data.IocPg4Sz = iocpage4sz;
6127 } else {
6128 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6129 ioc->spi_data.pIocPg4 = NULL;
6130 ioc->alloc_total -= iocpage4sz;
6131 }
6132}
6133
6134static void
6135mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6136{
6137 IOCPage1_t *pIoc1;
6138 CONFIGPARMS cfg;
6139 ConfigPageHeader_t header;
6140 dma_addr_t ioc1_dma;
6141 int iocpage1sz = 0;
6142 u32 tmp;
6143
6144 /* Check the Coalescing Timeout in IOC Page 1
6145 */
6146 header.PageVersion = 0;
6147 header.PageLength = 0;
6148 header.PageNumber = 1;
6149 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6150 cfg.cfghdr.hdr = &header;
6151 cfg.physAddr = -1;
6152 cfg.pageAddr = 0;
6153 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6154 cfg.dir = 0;
6155 cfg.timeout = 0;
6156 if (mpt_config(ioc, &cfg) != 0)
6157 return;
6158
6159 if (header.PageLength == 0)
6160 return;
6161
6162 /* Read Header good, alloc memory
6163 */
6164 iocpage1sz = header.PageLength * 4;
6165 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6166 if (!pIoc1)
6167 return;
6168
6169 /* Read the Page and check coalescing timeout
6170 */
6171 cfg.physAddr = ioc1_dma;
6172 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6173 if (mpt_config(ioc, &cfg) == 0) {
6174
6175 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6176 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6177 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6178
6179 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6180 ioc->name, tmp));
6181
6182 if (tmp > MPT_COALESCING_TIMEOUT) {
6183 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6184
6185 /* Write NVRAM and current
6186 */
6187 cfg.dir = 1;
6188 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6189 if (mpt_config(ioc, &cfg) == 0) {
6190 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6191 ioc->name, MPT_COALESCING_TIMEOUT));
6192
6193 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6194 if (mpt_config(ioc, &cfg) == 0) {
6195 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6196 "Reset NVRAM Coalescing Timeout to = %d\n",
6197 ioc->name, MPT_COALESCING_TIMEOUT));
6198 } else {
6199 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6200 "Reset NVRAM Coalescing Timeout Failed\n",
6201 ioc->name));
6202 }
6203
6204 } else {
6205 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6206 "Reset of Current Coalescing Timeout Failed!\n",
6207 ioc->name));
6208 }
6209 }
6210
6211 } else {
6212 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6213 }
6214 }
6215
6216 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6217
6218 return;
6219}
6220
6221static void
6222mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6223{
6224 CONFIGPARMS cfg;
6225 ConfigPageHeader_t hdr;
6226 dma_addr_t buf_dma;
6227 ManufacturingPage0_t *pbuf = NULL;
6228
6229 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6230 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6231
6232 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6233 cfg.cfghdr.hdr = &hdr;
6234 cfg.physAddr = -1;
6235 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6236 cfg.timeout = 10;
6237
6238 if (mpt_config(ioc, &cfg) != 0)
6239 goto out;
6240
6241 if (!cfg.cfghdr.hdr->PageLength)
6242 goto out;
6243
6244 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6245 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6246 if (!pbuf)
6247 goto out;
6248
6249 cfg.physAddr = buf_dma;
6250
6251 if (mpt_config(ioc, &cfg) != 0)
6252 goto out;
6253
6254 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6255 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6256 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6257
6258out:
6259
6260 if (pbuf)
6261 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6262}
6263
6264/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6265/**
6266 * SendEventNotification - Send EventNotification (on or off) request to adapter
6267 * @ioc: Pointer to MPT_ADAPTER structure
6268 * @EvSwitch: Event switch flags
6269 * @sleepFlag: Specifies whether the process can sleep
6270 */
6271static int
6272SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6273{
6274 EventNotification_t evn;
6275 MPIDefaultReply_t reply_buf;
6276
6277 memset(&evn, 0, sizeof(EventNotification_t));
6278 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6279
6280 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6281 evn.Switch = EvSwitch;
6282 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6283
6284 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6285 "Sending EventNotification (%d) request %p\n",
6286 ioc->name, EvSwitch, &evn));
6287
6288 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6289 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6290 sleepFlag);
6291}
6292
6293/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6294/**
6295 * SendEventAck - Send EventAck request to MPT adapter.
6296 * @ioc: Pointer to MPT_ADAPTER structure
6297 * @evnp: Pointer to original EventNotification request
6298 */
6299static int
6300SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6301{
6302 EventAck_t *pAck;
6303
6304 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6305 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6306 ioc->name, __func__));
6307 return -1;
6308 }
6309
6310 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6311
6312 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6313 pAck->ChainOffset = 0;
6314 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6315 pAck->MsgFlags = 0;
6316 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6317 pAck->Event = evnp->Event;
6318 pAck->EventContext = evnp->EventContext;
6319
6320 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6321
6322 return 0;
6323}
6324
6325/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6326/**
6327 * mpt_config - Generic function to issue config message
6328 * @ioc: Pointer to an adapter structure
6329 * @pCfg: Pointer to a configuration structure. Struct contains
6330 * action, page address, direction, physical address
6331 * and pointer to a configuration page header
6332 * Page header is updated.
6333 *
6334 * Returns 0 for success
6335 * -EPERM if not allowed due to ISR context
6336 * -EAGAIN if no msg frames currently available
6337 * -EFAULT for non-successful reply or no reply (timeout)
6338 */
6339int
6340mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6341{
6342 Config_t *pReq;
6343 ConfigReply_t *pReply;
6344 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6345 MPT_FRAME_HDR *mf;
6346 int ii;
6347 int flagsLength;
6348 long timeout;
6349 int ret;
6350 u8 page_type = 0, extend_page;
6351 unsigned long timeleft;
6352 unsigned long flags;
6353 int in_isr;
6354 u8 issue_hard_reset = 0;
6355 u8 retry_count = 0;
6356
6357 /* Prevent calling wait_event() (below), if caller happens
6358 * to be in ISR context, because that is fatal!
6359 */
6360 in_isr = in_interrupt();
6361 if (in_isr) {
6362 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6363 ioc->name));
6364 return -EPERM;
6365 }
6366
6367 /* don't send a config page during diag reset */
6368 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6369 if (ioc->ioc_reset_in_progress) {
6370 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6371 "%s: busy with host reset\n", ioc->name, __func__));
6372 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6373 return -EBUSY;
6374 }
6375 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6376
6377 /* don't send if no chance of success */
6378 if (!ioc->active ||
6379 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6380 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6381 "%s: ioc not operational, %d, %xh\n",
6382 ioc->name, __func__, ioc->active,
6383 mpt_GetIocState(ioc, 0)));
6384 return -EFAULT;
6385 }
6386
6387 retry_config:
6388 mutex_lock(&ioc->mptbase_cmds.mutex);
6389 /* init the internal cmd struct */
6390 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6391 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6392
6393 /* Get and Populate a free Frame
6394 */
6395 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6396 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6397 "mpt_config: no msg frames!\n", ioc->name));
6398 ret = -EAGAIN;
6399 goto out;
6400 }
6401
6402 pReq = (Config_t *)mf;
6403 pReq->Action = pCfg->action;
6404 pReq->Reserved = 0;
6405 pReq->ChainOffset = 0;
6406 pReq->Function = MPI_FUNCTION_CONFIG;
6407
6408 /* Assume page type is not extended and clear "reserved" fields. */
6409 pReq->ExtPageLength = 0;
6410 pReq->ExtPageType = 0;
6411 pReq->MsgFlags = 0;
6412
6413 for (ii=0; ii < 8; ii++)
6414 pReq->Reserved2[ii] = 0;
6415
6416 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6417 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6418 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6419 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6420
6421 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6422 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6423 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6424 pReq->ExtPageType = pExtHdr->ExtPageType;
6425 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6426
6427 /* Page Length must be treated as a reserved field for the
6428 * extended header.
6429 */
6430 pReq->Header.PageLength = 0;
6431 }
6432
6433 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6434
6435 /* Add a SGE to the config request.
6436 */
6437 if (pCfg->dir)
6438 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6439 else
6440 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6441
6442 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6443 MPI_CONFIG_PAGETYPE_EXTENDED) {
6444 flagsLength |= pExtHdr->ExtPageLength * 4;
6445 page_type = pReq->ExtPageType;
6446 extend_page = 1;
6447 } else {
6448 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6449 page_type = pReq->Header.PageType;
6450 extend_page = 0;
6451 }
6452
6453 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6454 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6455 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6456
6457 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6458 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6459 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6460 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6461 timeout);
6462 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6463 ret = -ETIME;
6464 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6465 "Failed Sending Config request type 0x%x, page 0x%x,"
6466 " action %d, status %xh, time left %ld\n\n",
6467 ioc->name, page_type, pReq->Header.PageNumber,
6468 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6469 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6470 goto out;
6471 if (!timeleft) {
6472 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6473 if (ioc->ioc_reset_in_progress) {
6474 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6475 flags);
6476 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6477 " progress mpt_config timed out.!!\n",
6478 __func__, ioc->name);
6479 mutex_unlock(&ioc->mptbase_cmds.mutex);
6480 return -EFAULT;
6481 }
6482 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6483 issue_hard_reset = 1;
6484 }
6485 goto out;
6486 }
6487
6488 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6489 ret = -1;
6490 goto out;
6491 }
6492 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6493 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6494 if (ret == MPI_IOCSTATUS_SUCCESS) {
6495 if (extend_page) {
6496 pCfg->cfghdr.ehdr->ExtPageLength =
6497 le16_to_cpu(pReply->ExtPageLength);
6498 pCfg->cfghdr.ehdr->ExtPageType =
6499 pReply->ExtPageType;
6500 }
6501 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6502 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6503 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6504 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6505
6506 }
6507
6508 if (retry_count)
6509 printk(MYIOC_s_INFO_FMT "Retry completed "
6510 "ret=0x%x timeleft=%ld\n",
6511 ioc->name, ret, timeleft);
6512
6513 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6514 ret, le32_to_cpu(pReply->IOCLogInfo)));
6515
6516out:
6517
6518 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6519 mutex_unlock(&ioc->mptbase_cmds.mutex);
6520 if (issue_hard_reset) {
6521 issue_hard_reset = 0;
6522 printk(MYIOC_s_WARN_FMT
6523 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6524 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6525 if (retry_count == 0) {
6526 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6527 retry_count++;
6528 } else
6529 mpt_HardResetHandler(ioc, CAN_SLEEP);
6530
6531 mpt_free_msg_frame(ioc, mf);
6532 /* attempt one retry for a timed out command */
6533 if (retry_count < 2) {
6534 printk(MYIOC_s_INFO_FMT
6535 "Attempting Retry Config request"
6536 " type 0x%x, page 0x%x,"
6537 " action %d\n", ioc->name, page_type,
6538 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6539 retry_count++;
6540 goto retry_config;
6541 }
6542 }
6543 return ret;
6544
6545}
6546
6547/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6548/**
6549 * mpt_ioc_reset - Base cleanup for hard reset
6550 * @ioc: Pointer to the adapter structure
6551 * @reset_phase: Indicates pre- or post-reset functionality
6552 *
6553 * Remark: Frees resources with internally generated commands.
6554 */
6555static int
6556mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6557{
6558 switch (reset_phase) {
6559 case MPT_IOC_SETUP_RESET:
6560 ioc->taskmgmt_quiesce_io = 1;
6561 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6562 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6563 break;
6564 case MPT_IOC_PRE_RESET:
6565 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6566 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6567 break;
6568 case MPT_IOC_POST_RESET:
6569 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6570 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6571/* wake up mptbase_cmds */
6572 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6573 ioc->mptbase_cmds.status |=
6574 MPT_MGMT_STATUS_DID_IOCRESET;
6575 complete(&ioc->mptbase_cmds.done);
6576 }
6577/* wake up taskmgmt_cmds */
6578 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6579 ioc->taskmgmt_cmds.status |=
6580 MPT_MGMT_STATUS_DID_IOCRESET;
6581 complete(&ioc->taskmgmt_cmds.done);
6582 }
6583 break;
6584 default:
6585 break;
6586 }
6587
6588 return 1; /* currently means nothing really */
6589}
6590
6591
6592#ifdef CONFIG_PROC_FS /* { */
6593/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6594/*
6595 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6596 */
6597/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6598/**
6599 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6600 *
6601 * Returns 0 for success, non-zero for failure.
6602 */
6603static int
6604procmpt_create(void)
6605{
6606 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6607 if (mpt_proc_root_dir == NULL)
6608 return -ENOTDIR;
6609
6610 proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
6611 proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
6612 return 0;
6613}
6614
6615/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6616/**
6617 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6618 *
6619 * Returns 0 for success, non-zero for failure.
6620 */
6621static void
6622procmpt_destroy(void)
6623{
6624 remove_proc_entry("version", mpt_proc_root_dir);
6625 remove_proc_entry("summary", mpt_proc_root_dir);
6626 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6627}
6628
6629/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6630/*
6631 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6632 */
6633static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6634
6635static int mpt_summary_proc_show(struct seq_file *m, void *v)
6636{
6637 MPT_ADAPTER *ioc = m->private;
6638
6639 if (ioc) {
6640 seq_mpt_print_ioc_summary(ioc, m, 1);
6641 } else {
6642 list_for_each_entry(ioc, &ioc_list, list) {
6643 seq_mpt_print_ioc_summary(ioc, m, 1);
6644 }
6645 }
6646
6647 return 0;
6648}
6649
6650static int mpt_summary_proc_open(struct inode *inode, struct file *file)
6651{
6652 return single_open(file, mpt_summary_proc_show, PDE_DATA(inode));
6653}
6654
6655static const struct file_operations mpt_summary_proc_fops = {
6656 .owner = THIS_MODULE,
6657 .open = mpt_summary_proc_open,
6658 .read = seq_read,
6659 .llseek = seq_lseek,
6660 .release = single_release,
6661};
6662
6663static int mpt_version_proc_show(struct seq_file *m, void *v)
6664{
6665 u8 cb_idx;
6666 int scsi, fc, sas, lan, ctl, targ, dmp;
6667 char *drvname;
6668
6669 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6670 seq_printf(m, " Fusion MPT base driver\n");
6671
6672 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6673 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6674 drvname = NULL;
6675 if (MptCallbacks[cb_idx]) {
6676 switch (MptDriverClass[cb_idx]) {
6677 case MPTSPI_DRIVER:
6678 if (!scsi++) drvname = "SPI host";
6679 break;
6680 case MPTFC_DRIVER:
6681 if (!fc++) drvname = "FC host";
6682 break;
6683 case MPTSAS_DRIVER:
6684 if (!sas++) drvname = "SAS host";
6685 break;
6686 case MPTLAN_DRIVER:
6687 if (!lan++) drvname = "LAN";
6688 break;
6689 case MPTSTM_DRIVER:
6690 if (!targ++) drvname = "SCSI target";
6691 break;
6692 case MPTCTL_DRIVER:
6693 if (!ctl++) drvname = "ioctl";
6694 break;
6695 }
6696
6697 if (drvname)
6698 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6699 }
6700 }
6701
6702 return 0;
6703}
6704
6705static int mpt_version_proc_open(struct inode *inode, struct file *file)
6706{
6707 return single_open(file, mpt_version_proc_show, NULL);
6708}
6709
6710static const struct file_operations mpt_version_proc_fops = {
6711 .owner = THIS_MODULE,
6712 .open = mpt_version_proc_open,
6713 .read = seq_read,
6714 .llseek = seq_lseek,
6715 .release = single_release,
6716};
6717
6718static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6719{
6720 MPT_ADAPTER *ioc = m->private;
6721 char expVer[32];
6722 int sz;
6723 int p;
6724
6725 mpt_get_fw_exp_ver(expVer, ioc);
6726
6727 seq_printf(m, "%s:", ioc->name);
6728 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6729 seq_printf(m, " (f/w download boot flag set)");
6730// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6731// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6732
6733 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6734 ioc->facts.ProductID,
6735 ioc->prod_name);
6736 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6737 if (ioc->facts.FWImageSize)
6738 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6739 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6740 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6741 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6742
6743 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6744 ioc->facts.CurrentHostMfaHighAddr);
6745 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6746 ioc->facts.CurrentSenseBufferHighAddr);
6747
6748 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6749 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6750
6751 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6752 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6753 /*
6754 * Rounding UP to nearest 4-kB boundary here...
6755 */
6756 sz = (ioc->req_sz * ioc->req_depth) + 128;
6757 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6758 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6759 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6760 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6761 4*ioc->facts.RequestFrameSize,
6762 ioc->facts.GlobalCredits);
6763
6764 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6765 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6766 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6767 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6768 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6769 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6770 ioc->facts.CurReplyFrameSize,
6771 ioc->facts.ReplyQueueDepth);
6772
6773 seq_printf(m, " MaxDevices = %d\n",
6774 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6775 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6776
6777 /* per-port info */
6778 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6779 seq_printf(m, " PortNumber = %d (of %d)\n",
6780 p+1,
6781 ioc->facts.NumberOfPorts);
6782 if (ioc->bus_type == FC) {
6783 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6784 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6785 seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
6786 a[5], a[4], a[3], a[2], a[1], a[0]);
6787 }
6788 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6789 ioc->fc_port_page0[p].WWNN.High,
6790 ioc->fc_port_page0[p].WWNN.Low,
6791 ioc->fc_port_page0[p].WWPN.High,
6792 ioc->fc_port_page0[p].WWPN.Low);
6793 }
6794 }
6795
6796 return 0;
6797}
6798
6799static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
6800{
6801 return single_open(file, mpt_iocinfo_proc_show, PDE_DATA(inode));
6802}
6803
6804static const struct file_operations mpt_iocinfo_proc_fops = {
6805 .owner = THIS_MODULE,
6806 .open = mpt_iocinfo_proc_open,
6807 .read = seq_read,
6808 .llseek = seq_lseek,
6809 .release = single_release,
6810};
6811#endif /* CONFIG_PROC_FS } */
6812
6813/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6814static void
6815mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6816{
6817 buf[0] ='\0';
6818 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6819 sprintf(buf, " (Exp %02d%02d)",
6820 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6821 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6822
6823 /* insider hack! */
6824 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6825 strcat(buf, " [MDBG]");
6826 }
6827}
6828
6829/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6830/**
6831 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6832 * @ioc: Pointer to MPT_ADAPTER structure
6833 * @buffer: Pointer to buffer where IOC summary info should be written
6834 * @size: Pointer to number of bytes we wrote (set by this routine)
6835 * @len: Offset at which to start writing in buffer
6836 * @showlan: Display LAN stuff?
6837 *
6838 * This routine writes (english readable) ASCII text, which represents
6839 * a summary of IOC information, to a buffer.
6840 */
6841void
6842mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6843{
6844 char expVer[32];
6845 int y;
6846
6847 mpt_get_fw_exp_ver(expVer, ioc);
6848
6849 /*
6850 * Shorter summary of attached ioc's...
6851 */
6852 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6853 ioc->name,
6854 ioc->prod_name,
6855 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6856 ioc->facts.FWVersion.Word,
6857 expVer,
6858 ioc->facts.NumberOfPorts,
6859 ioc->req_depth);
6860
6861 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6862 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6863 y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6864 a[5], a[4], a[3], a[2], a[1], a[0]);
6865 }
6866
6867 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6868
6869 if (!ioc->active)
6870 y += sprintf(buffer+len+y, " (disabled)");
6871
6872 y += sprintf(buffer+len+y, "\n");
6873
6874 *size = y;
6875}
6876
6877#ifdef CONFIG_PROC_FS
6878static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6879{
6880 char expVer[32];
6881
6882 mpt_get_fw_exp_ver(expVer, ioc);
6883
6884 /*
6885 * Shorter summary of attached ioc's...
6886 */
6887 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6888 ioc->name,
6889 ioc->prod_name,
6890 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6891 ioc->facts.FWVersion.Word,
6892 expVer,
6893 ioc->facts.NumberOfPorts,
6894 ioc->req_depth);
6895
6896 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6897 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6898 seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6899 a[5], a[4], a[3], a[2], a[1], a[0]);
6900 }
6901
6902 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6903
6904 if (!ioc->active)
6905 seq_printf(m, " (disabled)");
6906
6907 seq_putc(m, '\n');
6908}
6909#endif
6910
6911/**
6912 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6913 * @ioc: Pointer to MPT_ADAPTER structure
6914 *
6915 * Returns 0 for SUCCESS or -1 if FAILED.
6916 *
6917 * If -1 is return, then it was not possible to set the flags
6918 **/
6919int
6920mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6921{
6922 unsigned long flags;
6923 int retval;
6924
6925 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6926 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6927 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6928 retval = -1;
6929 goto out;
6930 }
6931 retval = 0;
6932 ioc->taskmgmt_in_progress = 1;
6933 ioc->taskmgmt_quiesce_io = 1;
6934 if (ioc->alt_ioc) {
6935 ioc->alt_ioc->taskmgmt_in_progress = 1;
6936 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6937 }
6938 out:
6939 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6940 return retval;
6941}
6942EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6943
6944/**
6945 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6946 * @ioc: Pointer to MPT_ADAPTER structure
6947 *
6948 **/
6949void
6950mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6951{
6952 unsigned long flags;
6953
6954 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6955 ioc->taskmgmt_in_progress = 0;
6956 ioc->taskmgmt_quiesce_io = 0;
6957 if (ioc->alt_ioc) {
6958 ioc->alt_ioc->taskmgmt_in_progress = 0;
6959 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6960 }
6961 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6962}
6963EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6964
6965
6966/**
6967 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6968 * the kernel
6969 * @ioc: Pointer to MPT_ADAPTER structure
6970 *
6971 **/
6972void
6973mpt_halt_firmware(MPT_ADAPTER *ioc)
6974{
6975 u32 ioc_raw_state;
6976
6977 ioc_raw_state = mpt_GetIocState(ioc, 0);
6978
6979 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6980 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6981 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6982 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6983 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6984 } else {
6985 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6986 panic("%s: Firmware is halted due to command timeout\n",
6987 ioc->name);
6988 }
6989}
6990EXPORT_SYMBOL(mpt_halt_firmware);
6991
6992/**
6993 * mpt_SoftResetHandler - Issues a less expensive reset
6994 * @ioc: Pointer to MPT_ADAPTER structure
6995 * @sleepFlag: Indicates if sleep or schedule must be called.
6996 *
6997 * Returns 0 for SUCCESS or -1 if FAILED.
6998 *
6999 * Message Unit Reset - instructs the IOC to reset the Reply Post and
7000 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
7001 * All posted buffers are freed, and event notification is turned off.
7002 * IOC doesn't reply to any outstanding request. This will transfer IOC
7003 * to READY state.
7004 **/
7005static int
7006mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7007{
7008 int rc;
7009 int ii;
7010 u8 cb_idx;
7011 unsigned long flags;
7012 u32 ioc_state;
7013 unsigned long time_count;
7014
7015 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
7016 ioc->name));
7017
7018 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7019
7020 if (mpt_fwfault_debug)
7021 mpt_halt_firmware(ioc);
7022
7023 if (ioc_state == MPI_IOC_STATE_FAULT ||
7024 ioc_state == MPI_IOC_STATE_RESET) {
7025 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7026 "skipping, either in FAULT or RESET state!\n", ioc->name));
7027 return -1;
7028 }
7029
7030 if (ioc->bus_type == FC) {
7031 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7032 "skipping, because the bus type is FC!\n", ioc->name));
7033 return -1;
7034 }
7035
7036 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7037 if (ioc->ioc_reset_in_progress) {
7038 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7039 return -1;
7040 }
7041 ioc->ioc_reset_in_progress = 1;
7042 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7043
7044 rc = -1;
7045
7046 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7047 if (MptResetHandlers[cb_idx])
7048 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7049 }
7050
7051 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7052 if (ioc->taskmgmt_in_progress) {
7053 ioc->ioc_reset_in_progress = 0;
7054 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7055 return -1;
7056 }
7057 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7058 /* Disable reply interrupts (also blocks FreeQ) */
7059 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7060 ioc->active = 0;
7061 time_count = jiffies;
7062
7063 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7064
7065 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7066 if (MptResetHandlers[cb_idx])
7067 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7068 }
7069
7070 if (rc)
7071 goto out;
7072
7073 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7074 if (ioc_state != MPI_IOC_STATE_READY)
7075 goto out;
7076
7077 for (ii = 0; ii < 5; ii++) {
7078 /* Get IOC facts! Allow 5 retries */
7079 rc = GetIocFacts(ioc, sleepFlag,
7080 MPT_HOSTEVENT_IOC_RECOVER);
7081 if (rc == 0)
7082 break;
7083 if (sleepFlag == CAN_SLEEP)
7084 msleep(100);
7085 else
7086 mdelay(100);
7087 }
7088 if (ii == 5)
7089 goto out;
7090
7091 rc = PrimeIocFifos(ioc);
7092 if (rc != 0)
7093 goto out;
7094
7095 rc = SendIocInit(ioc, sleepFlag);
7096 if (rc != 0)
7097 goto out;
7098
7099 rc = SendEventNotification(ioc, 1, sleepFlag);
7100 if (rc != 0)
7101 goto out;
7102
7103 if (ioc->hard_resets < -1)
7104 ioc->hard_resets++;
7105
7106 /*
7107 * At this point, we know soft reset succeeded.
7108 */
7109
7110 ioc->active = 1;
7111 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7112
7113 out:
7114 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7115 ioc->ioc_reset_in_progress = 0;
7116 ioc->taskmgmt_quiesce_io = 0;
7117 ioc->taskmgmt_in_progress = 0;
7118 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7119
7120 if (ioc->active) { /* otherwise, hard reset coming */
7121 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7122 if (MptResetHandlers[cb_idx])
7123 mpt_signal_reset(cb_idx, ioc,
7124 MPT_IOC_POST_RESET);
7125 }
7126 }
7127
7128 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7129 "SoftResetHandler: completed (%d seconds): %s\n",
7130 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7131 ((rc == 0) ? "SUCCESS" : "FAILED")));
7132
7133 return rc;
7134}
7135
7136/**
7137 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7138 * @ioc: Pointer to MPT_ADAPTER structure
7139 * @sleepFlag: Indicates if sleep or schedule must be called.
7140 *
7141 * Returns 0 for SUCCESS or -1 if FAILED.
7142 * Try for softreset first, only if it fails go for expensive
7143 * HardReset.
7144 **/
7145int
7146mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7147 int ret = -1;
7148
7149 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7150 if (ret == 0)
7151 return ret;
7152 ret = mpt_HardResetHandler(ioc, sleepFlag);
7153 return ret;
7154}
7155EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7156
7157/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7158/*
7159 * Reset Handling
7160 */
7161/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7162/**
7163 * mpt_HardResetHandler - Generic reset handler
7164 * @ioc: Pointer to MPT_ADAPTER structure
7165 * @sleepFlag: Indicates if sleep or schedule must be called.
7166 *
7167 * Issues SCSI Task Management call based on input arg values.
7168 * If TaskMgmt fails, returns associated SCSI request.
7169 *
7170 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7171 * or a non-interrupt thread. In the former, must not call schedule().
7172 *
7173 * Note: A return of -1 is a FATAL error case, as it means a
7174 * FW reload/initialization failed.
7175 *
7176 * Returns 0 for SUCCESS or -1 if FAILED.
7177 */
7178int
7179mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7180{
7181 int rc;
7182 u8 cb_idx;
7183 unsigned long flags;
7184 unsigned long time_count;
7185
7186 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7187#ifdef MFCNT
7188 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7189 printk("MF count 0x%x !\n", ioc->mfcnt);
7190#endif
7191 if (mpt_fwfault_debug)
7192 mpt_halt_firmware(ioc);
7193
7194 /* Reset the adapter. Prevent more than 1 call to
7195 * mpt_do_ioc_recovery at any instant in time.
7196 */
7197 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7198 if (ioc->ioc_reset_in_progress) {
7199 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7200 ioc->wait_on_reset_completion = 1;
7201 do {
7202 ssleep(1);
7203 } while (ioc->ioc_reset_in_progress == 1);
7204 ioc->wait_on_reset_completion = 0;
7205 return ioc->reset_status;
7206 }
7207 if (ioc->wait_on_reset_completion) {
7208 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7209 rc = 0;
7210 time_count = jiffies;
7211 goto exit;
7212 }
7213 ioc->ioc_reset_in_progress = 1;
7214 if (ioc->alt_ioc)
7215 ioc->alt_ioc->ioc_reset_in_progress = 1;
7216 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7217
7218
7219 /* The SCSI driver needs to adjust timeouts on all current
7220 * commands prior to the diagnostic reset being issued.
7221 * Prevents timeouts occurring during a diagnostic reset...very bad.
7222 * For all other protocol drivers, this is a no-op.
7223 */
7224 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7225 if (MptResetHandlers[cb_idx]) {
7226 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7227 if (ioc->alt_ioc)
7228 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7229 MPT_IOC_SETUP_RESET);
7230 }
7231 }
7232
7233 time_count = jiffies;
7234 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7235 if (rc != 0) {
7236 printk(KERN_WARNING MYNAM
7237 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7238 rc, ioc->name, mpt_GetIocState(ioc, 0));
7239 } else {
7240 if (ioc->hard_resets < -1)
7241 ioc->hard_resets++;
7242 }
7243
7244 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7245 ioc->ioc_reset_in_progress = 0;
7246 ioc->taskmgmt_quiesce_io = 0;
7247 ioc->taskmgmt_in_progress = 0;
7248 ioc->reset_status = rc;
7249 if (ioc->alt_ioc) {
7250 ioc->alt_ioc->ioc_reset_in_progress = 0;
7251 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7252 ioc->alt_ioc->taskmgmt_in_progress = 0;
7253 }
7254 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7255
7256 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7257 if (MptResetHandlers[cb_idx]) {
7258 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7259 if (ioc->alt_ioc)
7260 mpt_signal_reset(cb_idx,
7261 ioc->alt_ioc, MPT_IOC_POST_RESET);
7262 }
7263 }
7264exit:
7265 dtmprintk(ioc,
7266 printk(MYIOC_s_DEBUG_FMT
7267 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7268 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7269 "SUCCESS" : "FAILED")));
7270
7271 return rc;
7272}
7273
7274#ifdef CONFIG_FUSION_LOGGING
7275static void
7276mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7277{
7278 char *ds = NULL;
7279 u32 evData0;
7280 int ii;
7281 u8 event;
7282 char *evStr = ioc->evStr;
7283
7284 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7285 evData0 = le32_to_cpu(pEventReply->Data[0]);
7286
7287 switch(event) {
7288 case MPI_EVENT_NONE:
7289 ds = "None";
7290 break;
7291 case MPI_EVENT_LOG_DATA:
7292 ds = "Log Data";
7293 break;
7294 case MPI_EVENT_STATE_CHANGE:
7295 ds = "State Change";
7296 break;
7297 case MPI_EVENT_UNIT_ATTENTION:
7298 ds = "Unit Attention";
7299 break;
7300 case MPI_EVENT_IOC_BUS_RESET:
7301 ds = "IOC Bus Reset";
7302 break;
7303 case MPI_EVENT_EXT_BUS_RESET:
7304 ds = "External Bus Reset";
7305 break;
7306 case MPI_EVENT_RESCAN:
7307 ds = "Bus Rescan Event";
7308 break;
7309 case MPI_EVENT_LINK_STATUS_CHANGE:
7310 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7311 ds = "Link Status(FAILURE) Change";
7312 else
7313 ds = "Link Status(ACTIVE) Change";
7314 break;
7315 case MPI_EVENT_LOOP_STATE_CHANGE:
7316 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7317 ds = "Loop State(LIP) Change";
7318 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7319 ds = "Loop State(LPE) Change";
7320 else
7321 ds = "Loop State(LPB) Change";
7322 break;
7323 case MPI_EVENT_LOGOUT:
7324 ds = "Logout";
7325 break;
7326 case MPI_EVENT_EVENT_CHANGE:
7327 if (evData0)
7328 ds = "Events ON";
7329 else
7330 ds = "Events OFF";
7331 break;
7332 case MPI_EVENT_INTEGRATED_RAID:
7333 {
7334 u8 ReasonCode = (u8)(evData0 >> 16);
7335 switch (ReasonCode) {
7336 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7337 ds = "Integrated Raid: Volume Created";
7338 break;
7339 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7340 ds = "Integrated Raid: Volume Deleted";
7341 break;
7342 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7343 ds = "Integrated Raid: Volume Settings Changed";
7344 break;
7345 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7346 ds = "Integrated Raid: Volume Status Changed";
7347 break;
7348 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7349 ds = "Integrated Raid: Volume Physdisk Changed";
7350 break;
7351 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7352 ds = "Integrated Raid: Physdisk Created";
7353 break;
7354 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7355 ds = "Integrated Raid: Physdisk Deleted";
7356 break;
7357 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7358 ds = "Integrated Raid: Physdisk Settings Changed";
7359 break;
7360 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7361 ds = "Integrated Raid: Physdisk Status Changed";
7362 break;
7363 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7364 ds = "Integrated Raid: Domain Validation Needed";
7365 break;
7366 case MPI_EVENT_RAID_RC_SMART_DATA :
7367 ds = "Integrated Raid; Smart Data";
7368 break;
7369 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7370 ds = "Integrated Raid: Replace Action Started";
7371 break;
7372 default:
7373 ds = "Integrated Raid";
7374 break;
7375 }
7376 break;
7377 }
7378 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7379 ds = "SCSI Device Status Change";
7380 break;
7381 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7382 {
7383 u8 id = (u8)(evData0);
7384 u8 channel = (u8)(evData0 >> 8);
7385 u8 ReasonCode = (u8)(evData0 >> 16);
7386 switch (ReasonCode) {
7387 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7388 snprintf(evStr, EVENT_DESCR_STR_SZ,
7389 "SAS Device Status Change: Added: "
7390 "id=%d channel=%d", id, channel);
7391 break;
7392 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7393 snprintf(evStr, EVENT_DESCR_STR_SZ,
7394 "SAS Device Status Change: Deleted: "
7395 "id=%d channel=%d", id, channel);
7396 break;
7397 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7398 snprintf(evStr, EVENT_DESCR_STR_SZ,
7399 "SAS Device Status Change: SMART Data: "
7400 "id=%d channel=%d", id, channel);
7401 break;
7402 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7403 snprintf(evStr, EVENT_DESCR_STR_SZ,
7404 "SAS Device Status Change: No Persistancy: "
7405 "id=%d channel=%d", id, channel);
7406 break;
7407 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7408 snprintf(evStr, EVENT_DESCR_STR_SZ,
7409 "SAS Device Status Change: Unsupported Device "
7410 "Discovered : id=%d channel=%d", id, channel);
7411 break;
7412 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7413 snprintf(evStr, EVENT_DESCR_STR_SZ,
7414 "SAS Device Status Change: Internal Device "
7415 "Reset : id=%d channel=%d", id, channel);
7416 break;
7417 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7418 snprintf(evStr, EVENT_DESCR_STR_SZ,
7419 "SAS Device Status Change: Internal Task "
7420 "Abort : id=%d channel=%d", id, channel);
7421 break;
7422 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7423 snprintf(evStr, EVENT_DESCR_STR_SZ,
7424 "SAS Device Status Change: Internal Abort "
7425 "Task Set : id=%d channel=%d", id, channel);
7426 break;
7427 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7428 snprintf(evStr, EVENT_DESCR_STR_SZ,
7429 "SAS Device Status Change: Internal Clear "
7430 "Task Set : id=%d channel=%d", id, channel);
7431 break;
7432 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7433 snprintf(evStr, EVENT_DESCR_STR_SZ,
7434 "SAS Device Status Change: Internal Query "
7435 "Task : id=%d channel=%d", id, channel);
7436 break;
7437 default:
7438 snprintf(evStr, EVENT_DESCR_STR_SZ,
7439 "SAS Device Status Change: Unknown: "
7440 "id=%d channel=%d", id, channel);
7441 break;
7442 }
7443 break;
7444 }
7445 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7446 ds = "Bus Timer Expired";
7447 break;
7448 case MPI_EVENT_QUEUE_FULL:
7449 {
7450 u16 curr_depth = (u16)(evData0 >> 16);
7451 u8 channel = (u8)(evData0 >> 8);
7452 u8 id = (u8)(evData0);
7453
7454 snprintf(evStr, EVENT_DESCR_STR_SZ,
7455 "Queue Full: channel=%d id=%d depth=%d",
7456 channel, id, curr_depth);
7457 break;
7458 }
7459 case MPI_EVENT_SAS_SES:
7460 ds = "SAS SES Event";
7461 break;
7462 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7463 ds = "Persistent Table Full";
7464 break;
7465 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7466 {
7467 u8 LinkRates = (u8)(evData0 >> 8);
7468 u8 PhyNumber = (u8)(evData0);
7469 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7470 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7471 switch (LinkRates) {
7472 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7473 snprintf(evStr, EVENT_DESCR_STR_SZ,
7474 "SAS PHY Link Status: Phy=%d:"
7475 " Rate Unknown",PhyNumber);
7476 break;
7477 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7478 snprintf(evStr, EVENT_DESCR_STR_SZ,
7479 "SAS PHY Link Status: Phy=%d:"
7480 " Phy Disabled",PhyNumber);
7481 break;
7482 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7483 snprintf(evStr, EVENT_DESCR_STR_SZ,
7484 "SAS PHY Link Status: Phy=%d:"
7485 " Failed Speed Nego",PhyNumber);
7486 break;
7487 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7488 snprintf(evStr, EVENT_DESCR_STR_SZ,
7489 "SAS PHY Link Status: Phy=%d:"
7490 " Sata OOB Completed",PhyNumber);
7491 break;
7492 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7493 snprintf(evStr, EVENT_DESCR_STR_SZ,
7494 "SAS PHY Link Status: Phy=%d:"
7495 " Rate 1.5 Gbps",PhyNumber);
7496 break;
7497 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7498 snprintf(evStr, EVENT_DESCR_STR_SZ,
7499 "SAS PHY Link Status: Phy=%d:"
7500 " Rate 3.0 Gbps", PhyNumber);
7501 break;
7502 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7503 snprintf(evStr, EVENT_DESCR_STR_SZ,
7504 "SAS PHY Link Status: Phy=%d:"
7505 " Rate 6.0 Gbps", PhyNumber);
7506 break;
7507 default:
7508 snprintf(evStr, EVENT_DESCR_STR_SZ,
7509 "SAS PHY Link Status: Phy=%d", PhyNumber);
7510 break;
7511 }
7512 break;
7513 }
7514 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7515 ds = "SAS Discovery Error";
7516 break;
7517 case MPI_EVENT_IR_RESYNC_UPDATE:
7518 {
7519 u8 resync_complete = (u8)(evData0 >> 16);
7520 snprintf(evStr, EVENT_DESCR_STR_SZ,
7521 "IR Resync Update: Complete = %d:",resync_complete);
7522 break;
7523 }
7524 case MPI_EVENT_IR2:
7525 {
7526 u8 id = (u8)(evData0);
7527 u8 channel = (u8)(evData0 >> 8);
7528 u8 phys_num = (u8)(evData0 >> 24);
7529 u8 ReasonCode = (u8)(evData0 >> 16);
7530
7531 switch (ReasonCode) {
7532 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7533 snprintf(evStr, EVENT_DESCR_STR_SZ,
7534 "IR2: LD State Changed: "
7535 "id=%d channel=%d phys_num=%d",
7536 id, channel, phys_num);
7537 break;
7538 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7539 snprintf(evStr, EVENT_DESCR_STR_SZ,
7540 "IR2: PD State Changed "
7541 "id=%d channel=%d phys_num=%d",
7542 id, channel, phys_num);
7543 break;
7544 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7545 snprintf(evStr, EVENT_DESCR_STR_SZ,
7546 "IR2: Bad Block Table Full: "
7547 "id=%d channel=%d phys_num=%d",
7548 id, channel, phys_num);
7549 break;
7550 case MPI_EVENT_IR2_RC_PD_INSERTED:
7551 snprintf(evStr, EVENT_DESCR_STR_SZ,
7552 "IR2: PD Inserted: "
7553 "id=%d channel=%d phys_num=%d",
7554 id, channel, phys_num);
7555 break;
7556 case MPI_EVENT_IR2_RC_PD_REMOVED:
7557 snprintf(evStr, EVENT_DESCR_STR_SZ,
7558 "IR2: PD Removed: "
7559 "id=%d channel=%d phys_num=%d",
7560 id, channel, phys_num);
7561 break;
7562 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7563 snprintf(evStr, EVENT_DESCR_STR_SZ,
7564 "IR2: Foreign CFG Detected: "
7565 "id=%d channel=%d phys_num=%d",
7566 id, channel, phys_num);
7567 break;
7568 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7569 snprintf(evStr, EVENT_DESCR_STR_SZ,
7570 "IR2: Rebuild Medium Error: "
7571 "id=%d channel=%d phys_num=%d",
7572 id, channel, phys_num);
7573 break;
7574 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7575 snprintf(evStr, EVENT_DESCR_STR_SZ,
7576 "IR2: Dual Port Added: "
7577 "id=%d channel=%d phys_num=%d",
7578 id, channel, phys_num);
7579 break;
7580 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7581 snprintf(evStr, EVENT_DESCR_STR_SZ,
7582 "IR2: Dual Port Removed: "
7583 "id=%d channel=%d phys_num=%d",
7584 id, channel, phys_num);
7585 break;
7586 default:
7587 ds = "IR2";
7588 break;
7589 }
7590 break;
7591 }
7592 case MPI_EVENT_SAS_DISCOVERY:
7593 {
7594 if (evData0)
7595 ds = "SAS Discovery: Start";
7596 else
7597 ds = "SAS Discovery: Stop";
7598 break;
7599 }
7600 case MPI_EVENT_LOG_ENTRY_ADDED:
7601 ds = "SAS Log Entry Added";
7602 break;
7603
7604 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7605 {
7606 u8 phy_num = (u8)(evData0);
7607 u8 port_num = (u8)(evData0 >> 8);
7608 u8 port_width = (u8)(evData0 >> 16);
7609 u8 primative = (u8)(evData0 >> 24);
7610 snprintf(evStr, EVENT_DESCR_STR_SZ,
7611 "SAS Broadcase Primative: phy=%d port=%d "
7612 "width=%d primative=0x%02x",
7613 phy_num, port_num, port_width, primative);
7614 break;
7615 }
7616
7617 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7618 {
7619 u8 reason = (u8)(evData0);
7620
7621 switch (reason) {
7622 case MPI_EVENT_SAS_INIT_RC_ADDED:
7623 ds = "SAS Initiator Status Change: Added";
7624 break;
7625 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7626 ds = "SAS Initiator Status Change: Deleted";
7627 break;
7628 default:
7629 ds = "SAS Initiator Status Change";
7630 break;
7631 }
7632 break;
7633 }
7634
7635 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7636 {
7637 u8 max_init = (u8)(evData0);
7638 u8 current_init = (u8)(evData0 >> 8);
7639
7640 snprintf(evStr, EVENT_DESCR_STR_SZ,
7641 "SAS Initiator Device Table Overflow: max initiators=%02d "
7642 "current initators=%02d",
7643 max_init, current_init);
7644 break;
7645 }
7646 case MPI_EVENT_SAS_SMP_ERROR:
7647 {
7648 u8 status = (u8)(evData0);
7649 u8 port_num = (u8)(evData0 >> 8);
7650 u8 result = (u8)(evData0 >> 16);
7651
7652 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7653 snprintf(evStr, EVENT_DESCR_STR_SZ,
7654 "SAS SMP Error: port=%d result=0x%02x",
7655 port_num, result);
7656 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7657 snprintf(evStr, EVENT_DESCR_STR_SZ,
7658 "SAS SMP Error: port=%d : CRC Error",
7659 port_num);
7660 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7661 snprintf(evStr, EVENT_DESCR_STR_SZ,
7662 "SAS SMP Error: port=%d : Timeout",
7663 port_num);
7664 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7665 snprintf(evStr, EVENT_DESCR_STR_SZ,
7666 "SAS SMP Error: port=%d : No Destination",
7667 port_num);
7668 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7669 snprintf(evStr, EVENT_DESCR_STR_SZ,
7670 "SAS SMP Error: port=%d : Bad Destination",
7671 port_num);
7672 else
7673 snprintf(evStr, EVENT_DESCR_STR_SZ,
7674 "SAS SMP Error: port=%d : status=0x%02x",
7675 port_num, status);
7676 break;
7677 }
7678
7679 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7680 {
7681 u8 reason = (u8)(evData0);
7682
7683 switch (reason) {
7684 case MPI_EVENT_SAS_EXP_RC_ADDED:
7685 ds = "Expander Status Change: Added";
7686 break;
7687 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7688 ds = "Expander Status Change: Deleted";
7689 break;
7690 default:
7691 ds = "Expander Status Change";
7692 break;
7693 }
7694 break;
7695 }
7696
7697 /*
7698 * MPT base "custom" events may be added here...
7699 */
7700 default:
7701 ds = "Unknown";
7702 break;
7703 }
7704 if (ds)
7705 strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
7706
7707
7708 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7709 "MPT event:(%02Xh) : %s\n",
7710 ioc->name, event, evStr));
7711
7712 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7713 ": Event data:\n"));
7714 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7715 devtverboseprintk(ioc, printk(" %08x",
7716 le32_to_cpu(pEventReply->Data[ii])));
7717 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7718}
7719#endif
7720/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7721/**
7722 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7723 * @ioc: Pointer to MPT_ADAPTER structure
7724 * @pEventReply: Pointer to EventNotification reply frame
7725 * @evHandlers: Pointer to integer, number of event handlers
7726 *
7727 * Routes a received EventNotificationReply to all currently registered
7728 * event handlers.
7729 * Returns sum of event handlers return values.
7730 */
7731static int
7732ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7733{
7734 u16 evDataLen;
7735 u32 evData0 = 0;
7736 int ii;
7737 u8 cb_idx;
7738 int r = 0;
7739 int handlers = 0;
7740 u8 event;
7741
7742 /*
7743 * Do platform normalization of values
7744 */
7745 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7746 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7747 if (evDataLen) {
7748 evData0 = le32_to_cpu(pEventReply->Data[0]);
7749 }
7750
7751#ifdef CONFIG_FUSION_LOGGING
7752 if (evDataLen)
7753 mpt_display_event_info(ioc, pEventReply);
7754#endif
7755
7756 /*
7757 * Do general / base driver event processing
7758 */
7759 switch(event) {
7760 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7761 if (evDataLen) {
7762 u8 evState = evData0 & 0xFF;
7763
7764 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7765
7766 /* Update EventState field in cached IocFacts */
7767 if (ioc->facts.Function) {
7768 ioc->facts.EventState = evState;
7769 }
7770 }
7771 break;
7772 case MPI_EVENT_INTEGRATED_RAID:
7773 mptbase_raid_process_event_data(ioc,
7774 (MpiEventDataRaid_t *)pEventReply->Data);
7775 break;
7776 default:
7777 break;
7778 }
7779
7780 /*
7781 * Should this event be logged? Events are written sequentially.
7782 * When buffer is full, start again at the top.
7783 */
7784 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7785 int idx;
7786
7787 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7788
7789 ioc->events[idx].event = event;
7790 ioc->events[idx].eventContext = ioc->eventContext;
7791
7792 for (ii = 0; ii < 2; ii++) {
7793 if (ii < evDataLen)
7794 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7795 else
7796 ioc->events[idx].data[ii] = 0;
7797 }
7798
7799 ioc->eventContext++;
7800 }
7801
7802
7803 /*
7804 * Call each currently registered protocol event handler.
7805 */
7806 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7807 if (MptEvHandlers[cb_idx]) {
7808 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7809 "Routing Event to event handler #%d\n",
7810 ioc->name, cb_idx));
7811 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7812 handlers++;
7813 }
7814 }
7815 /* FIXME? Examine results here? */
7816
7817 /*
7818 * If needed, send (a single) EventAck.
7819 */
7820 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7821 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7822 "EventAck required\n",ioc->name));
7823 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7824 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7825 ioc->name, ii));
7826 }
7827 }
7828
7829 *evHandlers = handlers;
7830 return r;
7831}
7832
7833/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7834/**
7835 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7836 * @ioc: Pointer to MPT_ADAPTER structure
7837 * @log_info: U32 LogInfo reply word from the IOC
7838 *
7839 * Refer to lsi/mpi_log_fc.h.
7840 */
7841static void
7842mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7843{
7844 char *desc = "unknown";
7845
7846 switch (log_info & 0xFF000000) {
7847 case MPI_IOCLOGINFO_FC_INIT_BASE:
7848 desc = "FCP Initiator";
7849 break;
7850 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7851 desc = "FCP Target";
7852 break;
7853 case MPI_IOCLOGINFO_FC_LAN_BASE:
7854 desc = "LAN";
7855 break;
7856 case MPI_IOCLOGINFO_FC_MSG_BASE:
7857 desc = "MPI Message Layer";
7858 break;
7859 case MPI_IOCLOGINFO_FC_LINK_BASE:
7860 desc = "FC Link";
7861 break;
7862 case MPI_IOCLOGINFO_FC_CTX_BASE:
7863 desc = "Context Manager";
7864 break;
7865 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7866 desc = "Invalid Field Offset";
7867 break;
7868 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7869 desc = "State Change Info";
7870 break;
7871 }
7872
7873 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7874 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7875}
7876
7877/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7878/**
7879 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7880 * @ioc: Pointer to MPT_ADAPTER structure
7881 * @log_info: U32 LogInfo word from the IOC
7882 *
7883 * Refer to lsi/sp_log.h.
7884 */
7885static void
7886mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7887{
7888 u32 info = log_info & 0x00FF0000;
7889 char *desc = "unknown";
7890
7891 switch (info) {
7892 case 0x00010000:
7893 desc = "bug! MID not found";
7894 break;
7895
7896 case 0x00020000:
7897 desc = "Parity Error";
7898 break;
7899
7900 case 0x00030000:
7901 desc = "ASYNC Outbound Overrun";
7902 break;
7903
7904 case 0x00040000:
7905 desc = "SYNC Offset Error";
7906 break;
7907
7908 case 0x00050000:
7909 desc = "BM Change";
7910 break;
7911
7912 case 0x00060000:
7913 desc = "Msg In Overflow";
7914 break;
7915
7916 case 0x00070000:
7917 desc = "DMA Error";
7918 break;
7919
7920 case 0x00080000:
7921 desc = "Outbound DMA Overrun";
7922 break;
7923
7924 case 0x00090000:
7925 desc = "Task Management";
7926 break;
7927
7928 case 0x000A0000:
7929 desc = "Device Problem";
7930 break;
7931
7932 case 0x000B0000:
7933 desc = "Invalid Phase Change";
7934 break;
7935
7936 case 0x000C0000:
7937 desc = "Untagged Table Size";
7938 break;
7939
7940 }
7941
7942 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7943}
7944
7945/* strings for sas loginfo */
7946 static char *originator_str[] = {
7947 "IOP", /* 00h */
7948 "PL", /* 01h */
7949 "IR" /* 02h */
7950 };
7951 static char *iop_code_str[] = {
7952 NULL, /* 00h */
7953 "Invalid SAS Address", /* 01h */
7954 NULL, /* 02h */
7955 "Invalid Page", /* 03h */
7956 "Diag Message Error", /* 04h */
7957 "Task Terminated", /* 05h */
7958 "Enclosure Management", /* 06h */
7959 "Target Mode" /* 07h */
7960 };
7961 static char *pl_code_str[] = {
7962 NULL, /* 00h */
7963 "Open Failure", /* 01h */
7964 "Invalid Scatter Gather List", /* 02h */
7965 "Wrong Relative Offset or Frame Length", /* 03h */
7966 "Frame Transfer Error", /* 04h */
7967 "Transmit Frame Connected Low", /* 05h */
7968 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7969 "SATA Read Log Receive Data Error", /* 07h */
7970 "SATA NCQ Fail All Commands After Error", /* 08h */
7971 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7972 "Receive Frame Invalid Message", /* 0Ah */
7973 "Receive Context Message Valid Error", /* 0Bh */
7974 "Receive Frame Current Frame Error", /* 0Ch */
7975 "SATA Link Down", /* 0Dh */
7976 "Discovery SATA Init W IOS", /* 0Eh */
7977 "Config Invalid Page", /* 0Fh */
7978 "Discovery SATA Init Timeout", /* 10h */
7979 "Reset", /* 11h */
7980 "Abort", /* 12h */
7981 "IO Not Yet Executed", /* 13h */
7982 "IO Executed", /* 14h */
7983 "Persistent Reservation Out Not Affiliation "
7984 "Owner", /* 15h */
7985 "Open Transmit DMA Abort", /* 16h */
7986 "IO Device Missing Delay Retry", /* 17h */
7987 "IO Cancelled Due to Receive Error", /* 18h */
7988 NULL, /* 19h */
7989 NULL, /* 1Ah */
7990 NULL, /* 1Bh */
7991 NULL, /* 1Ch */
7992 NULL, /* 1Dh */
7993 NULL, /* 1Eh */
7994 NULL, /* 1Fh */
7995 "Enclosure Management" /* 20h */
7996 };
7997 static char *ir_code_str[] = {
7998 "Raid Action Error", /* 00h */
7999 NULL, /* 00h */
8000 NULL, /* 01h */
8001 NULL, /* 02h */
8002 NULL, /* 03h */
8003 NULL, /* 04h */
8004 NULL, /* 05h */
8005 NULL, /* 06h */
8006 NULL /* 07h */
8007 };
8008 static char *raid_sub_code_str[] = {
8009 NULL, /* 00h */
8010 "Volume Creation Failed: Data Passed too "
8011 "Large", /* 01h */
8012 "Volume Creation Failed: Duplicate Volumes "
8013 "Attempted", /* 02h */
8014 "Volume Creation Failed: Max Number "
8015 "Supported Volumes Exceeded", /* 03h */
8016 "Volume Creation Failed: DMA Error", /* 04h */
8017 "Volume Creation Failed: Invalid Volume Type", /* 05h */
8018 "Volume Creation Failed: Error Reading "
8019 "MFG Page 4", /* 06h */
8020 "Volume Creation Failed: Creating Internal "
8021 "Structures", /* 07h */
8022 NULL, /* 08h */
8023 NULL, /* 09h */
8024 NULL, /* 0Ah */
8025 NULL, /* 0Bh */
8026 NULL, /* 0Ch */
8027 NULL, /* 0Dh */
8028 NULL, /* 0Eh */
8029 NULL, /* 0Fh */
8030 "Activation failed: Already Active Volume", /* 10h */
8031 "Activation failed: Unsupported Volume Type", /* 11h */
8032 "Activation failed: Too Many Active Volumes", /* 12h */
8033 "Activation failed: Volume ID in Use", /* 13h */
8034 "Activation failed: Reported Failure", /* 14h */
8035 "Activation failed: Importing a Volume", /* 15h */
8036 NULL, /* 16h */
8037 NULL, /* 17h */
8038 NULL, /* 18h */
8039 NULL, /* 19h */
8040 NULL, /* 1Ah */
8041 NULL, /* 1Bh */
8042 NULL, /* 1Ch */
8043 NULL, /* 1Dh */
8044 NULL, /* 1Eh */
8045 NULL, /* 1Fh */
8046 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8047 "Phys Disk failed: Data Passed too Large", /* 21h */
8048 "Phys Disk failed: DMA Error", /* 22h */
8049 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8050 "Phys Disk failed: Creating Phys Disk Config "
8051 "Page", /* 24h */
8052 NULL, /* 25h */
8053 NULL, /* 26h */
8054 NULL, /* 27h */
8055 NULL, /* 28h */
8056 NULL, /* 29h */
8057 NULL, /* 2Ah */
8058 NULL, /* 2Bh */
8059 NULL, /* 2Ch */
8060 NULL, /* 2Dh */
8061 NULL, /* 2Eh */
8062 NULL, /* 2Fh */
8063 "Compatibility Error: IR Disabled", /* 30h */
8064 "Compatibility Error: Inquiry Command Failed", /* 31h */
8065 "Compatibility Error: Device not Direct Access "
8066 "Device ", /* 32h */
8067 "Compatibility Error: Removable Device Found", /* 33h */
8068 "Compatibility Error: Device SCSI Version not "
8069 "2 or Higher", /* 34h */
8070 "Compatibility Error: SATA Device, 48 BIT LBA "
8071 "not Supported", /* 35h */
8072 "Compatibility Error: Device doesn't have "
8073 "512 Byte Block Sizes", /* 36h */
8074 "Compatibility Error: Volume Type Check Failed", /* 37h */
8075 "Compatibility Error: Volume Type is "
8076 "Unsupported by FW", /* 38h */
8077 "Compatibility Error: Disk Drive too Small for "
8078 "use in Volume", /* 39h */
8079 "Compatibility Error: Phys Disk for Create "
8080 "Volume not Found", /* 3Ah */
8081 "Compatibility Error: Too Many or too Few "
8082 "Disks for Volume Type", /* 3Bh */
8083 "Compatibility Error: Disk stripe Sizes "
8084 "Must be 64KB", /* 3Ch */
8085 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8086 };
8087
8088/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8089/**
8090 * mpt_sas_log_info - Log information returned from SAS IOC.
8091 * @ioc: Pointer to MPT_ADAPTER structure
8092 * @log_info: U32 LogInfo reply word from the IOC
8093 * @cb_idx: callback function's handle
8094 *
8095 * Refer to lsi/mpi_log_sas.h.
8096 **/
8097static void
8098mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8099{
8100union loginfo_type {
8101 u32 loginfo;
8102 struct {
8103 u32 subcode:16;
8104 u32 code:8;
8105 u32 originator:4;
8106 u32 bus_type:4;
8107 }dw;
8108};
8109 union loginfo_type sas_loginfo;
8110 char *originator_desc = NULL;
8111 char *code_desc = NULL;
8112 char *sub_code_desc = NULL;
8113
8114 sas_loginfo.loginfo = log_info;
8115 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8116 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8117 return;
8118
8119 originator_desc = originator_str[sas_loginfo.dw.originator];
8120
8121 switch (sas_loginfo.dw.originator) {
8122
8123 case 0: /* IOP */
8124 if (sas_loginfo.dw.code <
8125 ARRAY_SIZE(iop_code_str))
8126 code_desc = iop_code_str[sas_loginfo.dw.code];
8127 break;
8128 case 1: /* PL */
8129 if (sas_loginfo.dw.code <
8130 ARRAY_SIZE(pl_code_str))
8131 code_desc = pl_code_str[sas_loginfo.dw.code];
8132 break;
8133 case 2: /* IR */
8134 if (sas_loginfo.dw.code >=
8135 ARRAY_SIZE(ir_code_str))
8136 break;
8137 code_desc = ir_code_str[sas_loginfo.dw.code];
8138 if (sas_loginfo.dw.subcode >=
8139 ARRAY_SIZE(raid_sub_code_str))
8140 break;
8141 if (sas_loginfo.dw.code == 0)
8142 sub_code_desc =
8143 raid_sub_code_str[sas_loginfo.dw.subcode];
8144 break;
8145 default:
8146 return;
8147 }
8148
8149 if (sub_code_desc != NULL)
8150 printk(MYIOC_s_INFO_FMT
8151 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8152 " SubCode={%s} cb_idx %s\n",
8153 ioc->name, log_info, originator_desc, code_desc,
8154 sub_code_desc, MptCallbacksName[cb_idx]);
8155 else if (code_desc != NULL)
8156 printk(MYIOC_s_INFO_FMT
8157 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8158 " SubCode(0x%04x) cb_idx %s\n",
8159 ioc->name, log_info, originator_desc, code_desc,
8160 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8161 else
8162 printk(MYIOC_s_INFO_FMT
8163 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8164 " SubCode(0x%04x) cb_idx %s\n",
8165 ioc->name, log_info, originator_desc,
8166 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8167 MptCallbacksName[cb_idx]);
8168}
8169
8170/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8171/**
8172 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8173 * @ioc: Pointer to MPT_ADAPTER structure
8174 * @ioc_status: U32 IOCStatus word from IOC
8175 * @mf: Pointer to MPT request frame
8176 *
8177 * Refer to lsi/mpi.h.
8178 **/
8179static void
8180mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8181{
8182 Config_t *pReq = (Config_t *)mf;
8183 char extend_desc[EVENT_DESCR_STR_SZ];
8184 char *desc = NULL;
8185 u32 form;
8186 u8 page_type;
8187
8188 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8189 page_type = pReq->ExtPageType;
8190 else
8191 page_type = pReq->Header.PageType;
8192
8193 /*
8194 * ignore invalid page messages for GET_NEXT_HANDLE
8195 */
8196 form = le32_to_cpu(pReq->PageAddress);
8197 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8198 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8199 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8200 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8201 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8202 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8203 return;
8204 }
8205 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8206 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8207 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8208 return;
8209 }
8210
8211 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8212 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8213 page_type, pReq->Header.PageNumber, pReq->Action, form);
8214
8215 switch (ioc_status) {
8216
8217 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8218 desc = "Config Page Invalid Action";
8219 break;
8220
8221 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8222 desc = "Config Page Invalid Type";
8223 break;
8224
8225 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8226 desc = "Config Page Invalid Page";
8227 break;
8228
8229 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8230 desc = "Config Page Invalid Data";
8231 break;
8232
8233 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8234 desc = "Config Page No Defaults";
8235 break;
8236
8237 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8238 desc = "Config Page Can't Commit";
8239 break;
8240 }
8241
8242 if (!desc)
8243 return;
8244
8245 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8246 ioc->name, ioc_status, desc, extend_desc));
8247}
8248
8249/**
8250 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8251 * @ioc: Pointer to MPT_ADAPTER structure
8252 * @ioc_status: U32 IOCStatus word from IOC
8253 * @mf: Pointer to MPT request frame
8254 *
8255 * Refer to lsi/mpi.h.
8256 **/
8257static void
8258mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8259{
8260 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8261 char *desc = NULL;
8262
8263 switch (status) {
8264
8265/****************************************************************************/
8266/* Common IOCStatus values for all replies */
8267/****************************************************************************/
8268
8269 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8270 desc = "Invalid Function";
8271 break;
8272
8273 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8274 desc = "Busy";
8275 break;
8276
8277 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8278 desc = "Invalid SGL";
8279 break;
8280
8281 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8282 desc = "Internal Error";
8283 break;
8284
8285 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8286 desc = "Reserved";
8287 break;
8288
8289 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8290 desc = "Insufficient Resources";
8291 break;
8292
8293 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8294 desc = "Invalid Field";
8295 break;
8296
8297 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8298 desc = "Invalid State";
8299 break;
8300
8301/****************************************************************************/
8302/* Config IOCStatus values */
8303/****************************************************************************/
8304
8305 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8306 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8307 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8308 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8309 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8310 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8311 mpt_iocstatus_info_config(ioc, status, mf);
8312 break;
8313
8314/****************************************************************************/
8315/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8316/* */
8317/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8318/* */
8319/****************************************************************************/
8320
8321 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8322 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8323 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8324 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8325 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8326 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8327 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8328 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8329 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8330 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8331 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8332 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8333 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8334 break;
8335
8336/****************************************************************************/
8337/* SCSI Target values */
8338/****************************************************************************/
8339
8340 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8341 desc = "Target: Priority IO";
8342 break;
8343
8344 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8345 desc = "Target: Invalid Port";
8346 break;
8347
8348 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8349 desc = "Target Invalid IO Index:";
8350 break;
8351
8352 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8353 desc = "Target: Aborted";
8354 break;
8355
8356 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8357 desc = "Target: No Conn Retryable";
8358 break;
8359
8360 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8361 desc = "Target: No Connection";
8362 break;
8363
8364 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8365 desc = "Target: Transfer Count Mismatch";
8366 break;
8367
8368 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8369 desc = "Target: STS Data not Sent";
8370 break;
8371
8372 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8373 desc = "Target: Data Offset Error";
8374 break;
8375
8376 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8377 desc = "Target: Too Much Write Data";
8378 break;
8379
8380 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8381 desc = "Target: IU Too Short";
8382 break;
8383
8384 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8385 desc = "Target: ACK NAK Timeout";
8386 break;
8387
8388 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8389 desc = "Target: Nak Received";
8390 break;
8391
8392/****************************************************************************/
8393/* Fibre Channel Direct Access values */
8394/****************************************************************************/
8395
8396 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8397 desc = "FC: Aborted";
8398 break;
8399
8400 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8401 desc = "FC: RX ID Invalid";
8402 break;
8403
8404 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8405 desc = "FC: DID Invalid";
8406 break;
8407
8408 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8409 desc = "FC: Node Logged Out";
8410 break;
8411
8412 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8413 desc = "FC: Exchange Canceled";
8414 break;
8415
8416/****************************************************************************/
8417/* LAN values */
8418/****************************************************************************/
8419
8420 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8421 desc = "LAN: Device not Found";
8422 break;
8423
8424 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8425 desc = "LAN: Device Failure";
8426 break;
8427
8428 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8429 desc = "LAN: Transmit Error";
8430 break;
8431
8432 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8433 desc = "LAN: Transmit Aborted";
8434 break;
8435
8436 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8437 desc = "LAN: Receive Error";
8438 break;
8439
8440 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8441 desc = "LAN: Receive Aborted";
8442 break;
8443
8444 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8445 desc = "LAN: Partial Packet";
8446 break;
8447
8448 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8449 desc = "LAN: Canceled";
8450 break;
8451
8452/****************************************************************************/
8453/* Serial Attached SCSI values */
8454/****************************************************************************/
8455
8456 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8457 desc = "SAS: SMP Request Failed";
8458 break;
8459
8460 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8461 desc = "SAS: SMP Data Overrun";
8462 break;
8463
8464 default:
8465 desc = "Others";
8466 break;
8467 }
8468
8469 if (!desc)
8470 return;
8471
8472 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8473 ioc->name, status, desc));
8474}
8475
8476/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8477EXPORT_SYMBOL(mpt_attach);
8478EXPORT_SYMBOL(mpt_detach);
8479#ifdef CONFIG_PM
8480EXPORT_SYMBOL(mpt_resume);
8481EXPORT_SYMBOL(mpt_suspend);
8482#endif
8483EXPORT_SYMBOL(ioc_list);
8484EXPORT_SYMBOL(mpt_register);
8485EXPORT_SYMBOL(mpt_deregister);
8486EXPORT_SYMBOL(mpt_event_register);
8487EXPORT_SYMBOL(mpt_event_deregister);
8488EXPORT_SYMBOL(mpt_reset_register);
8489EXPORT_SYMBOL(mpt_reset_deregister);
8490EXPORT_SYMBOL(mpt_device_driver_register);
8491EXPORT_SYMBOL(mpt_device_driver_deregister);
8492EXPORT_SYMBOL(mpt_get_msg_frame);
8493EXPORT_SYMBOL(mpt_put_msg_frame);
8494EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8495EXPORT_SYMBOL(mpt_free_msg_frame);
8496EXPORT_SYMBOL(mpt_send_handshake_request);
8497EXPORT_SYMBOL(mpt_verify_adapter);
8498EXPORT_SYMBOL(mpt_GetIocState);
8499EXPORT_SYMBOL(mpt_print_ioc_summary);
8500EXPORT_SYMBOL(mpt_HardResetHandler);
8501EXPORT_SYMBOL(mpt_config);
8502EXPORT_SYMBOL(mpt_findImVolumes);
8503EXPORT_SYMBOL(mpt_alloc_fw_memory);
8504EXPORT_SYMBOL(mpt_free_fw_memory);
8505EXPORT_SYMBOL(mptbase_sas_persist_operation);
8506EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8507
8508/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8509/**
8510 * fusion_init - Fusion MPT base driver initialization routine.
8511 *
8512 * Returns 0 for success, non-zero for failure.
8513 */
8514static int __init
8515fusion_init(void)
8516{
8517 u8 cb_idx;
8518
8519 show_mptmod_ver(my_NAME, my_VERSION);
8520 printk(KERN_INFO COPYRIGHT "\n");
8521
8522 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8523 MptCallbacks[cb_idx] = NULL;
8524 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8525 MptEvHandlers[cb_idx] = NULL;
8526 MptResetHandlers[cb_idx] = NULL;
8527 }
8528
8529 /* Register ourselves (mptbase) in order to facilitate
8530 * EventNotification handling.
8531 */
8532 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8533 "mptbase_reply");
8534
8535 /* Register for hard reset handling callbacks.
8536 */
8537 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8538
8539#ifdef CONFIG_PROC_FS
8540 (void) procmpt_create();
8541#endif
8542 return 0;
8543}
8544
8545/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8546/**
8547 * fusion_exit - Perform driver unload cleanup.
8548 *
8549 * This routine frees all resources associated with each MPT adapter
8550 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8551 */
8552static void __exit
8553fusion_exit(void)
8554{
8555
8556 mpt_reset_deregister(mpt_base_index);
8557
8558#ifdef CONFIG_PROC_FS
8559 procmpt_destroy();
8560#endif
8561}
8562
8563module_init(fusion_init);
8564module_exit(fusion_exit);
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h> /* needed for in_interrupt() proto */
61#include <linux/dma-mapping.h>
62#include <linux/kthread.h>
63#include <scsi/scsi_host.h>
64
65#include "mptbase.h"
66#include "lsi/mpi_log_fc.h"
67
68/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69#define my_NAME "Fusion MPT base driver"
70#define my_VERSION MPT_LINUX_VERSION_COMMON
71#define MYNAM "mptbase"
72
73MODULE_AUTHOR(MODULEAUTHOR);
74MODULE_DESCRIPTION(my_NAME);
75MODULE_LICENSE("GPL");
76MODULE_VERSION(my_VERSION);
77
78/*
79 * cmd line parameters
80 */
81
82static int mpt_msi_enable_spi;
83module_param(mpt_msi_enable_spi, int, 0);
84MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87static int mpt_msi_enable_fc;
88module_param(mpt_msi_enable_fc, int, 0);
89MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92static int mpt_msi_enable_sas;
93module_param(mpt_msi_enable_sas, int, 0);
94MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97static int mpt_channel_mapping;
98module_param(mpt_channel_mapping, int, 0);
99MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101static int mpt_debug_level;
102static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
103module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108int mpt_fwfault_debug;
109EXPORT_SYMBOL(mpt_fwfault_debug);
110module_param(mpt_fwfault_debug, int, 0600);
111MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117#ifdef MFCNT
118static int mfcounter = 0;
119#define PRINT_MF_COUNT 20000
120#endif
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * Public data...
125 */
126
127#define WHOINIT_UNKNOWN 0xAA
128
129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130/*
131 * Private data...
132 */
133 /* Adapter link list */
134LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145#ifdef CONFIG_PROC_FS
146static struct proc_dir_entry *mpt_proc_root_dir;
147#endif
148
149/*
150 * Driver Callback Index's
151 */
152static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153static u8 last_drv_idx;
154
155/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156/*
157 * Forward protos...
158 */
159static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181static int PrimeIocFifos(MPT_ADAPTER *ioc);
182static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185static int GetLanConfigPages(MPT_ADAPTER *ioc);
186static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199#ifdef CONFIG_PROC_FS
200static const struct file_operations mpt_summary_proc_fops;
201static const struct file_operations mpt_version_proc_fops;
202static const struct file_operations mpt_iocinfo_proc_fops;
203#endif
204static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215/* module entry point */
216static int __init fusion_init (void);
217static void __exit fusion_exit (void);
218
219#define CHIPREG_READ32(addr) readl_relaxed(addr)
220#define CHIPREG_READ32_dmasync(addr) readl(addr)
221#define CHIPREG_WRITE32(addr,val) writel(val, addr)
222#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225static void
226pci_disable_io_access(struct pci_dev *pdev)
227{
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233}
234
235static void
236pci_enable_io_access(struct pci_dev *pdev)
237{
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243}
244
245static int mpt_set_debug_level(const char *val, struct kernel_param *kp)
246{
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256}
257
258/**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264static u8
265mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266{
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273}
274
275/**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281static int
282mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283{
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
304 &dma_handle);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
320 buffer, dma_handle);
321 out:
322 return rc;
323}
324
325
326/**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
333static int mpt_remove_dead_ioc_func(void *arg)
334{
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if ((ioc == NULL))
339 return -1;
340
341 pdev = ioc->pcidev;
342 if ((pdev == NULL))
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347}
348
349
350
351/**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355**/
356static void
357mpt_fault_reset_work(struct work_struct *work)
358{
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436}
437
438
439/*
440 * Process turbo (context) reply...
441 */
442static void
443mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444{
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 break;
477 }
478 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
479 break;
480 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
481 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
483 break;
484 default:
485 cb_idx = 0;
486 BUG();
487 }
488
489 /* Check for (valid) IO callback! */
490 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
491 MptCallbacks[cb_idx] == NULL) {
492 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
493 __func__, ioc->name, cb_idx);
494 goto out;
495 }
496
497 if (MptCallbacks[cb_idx](ioc, mf, mr))
498 mpt_free_msg_frame(ioc, mf);
499 out:
500 mb();
501}
502
503static void
504mpt_reply(MPT_ADAPTER *ioc, u32 pa)
505{
506 MPT_FRAME_HDR *mf;
507 MPT_FRAME_HDR *mr;
508 u16 req_idx;
509 u8 cb_idx;
510 int freeme;
511
512 u32 reply_dma_low;
513 u16 ioc_stat;
514
515 /* non-TURBO reply! Hmmm, something may be up...
516 * Newest turbo reply mechanism; get address
517 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
518 */
519
520 /* Map DMA address of reply header to cpu address.
521 * pa is 32 bits - but the dma address may be 32 or 64 bits
522 * get offset based only only the low addresses
523 */
524
525 reply_dma_low = (pa <<= 1);
526 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
527 (reply_dma_low - ioc->reply_frames_low_dma));
528
529 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
530 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
531 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
532
533 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
534 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
535 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
536
537 /* Check/log IOC log info
538 */
539 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
540 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
541 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
542 if (ioc->bus_type == FC)
543 mpt_fc_log_info(ioc, log_info);
544 else if (ioc->bus_type == SPI)
545 mpt_spi_log_info(ioc, log_info);
546 else if (ioc->bus_type == SAS)
547 mpt_sas_log_info(ioc, log_info, cb_idx);
548 }
549
550 if (ioc_stat & MPI_IOCSTATUS_MASK)
551 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
552
553 /* Check for (valid) IO callback! */
554 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
555 MptCallbacks[cb_idx] == NULL) {
556 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
557 __func__, ioc->name, cb_idx);
558 freeme = 0;
559 goto out;
560 }
561
562 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
563
564 out:
565 /* Flush (non-TURBO) reply with a WRITE! */
566 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
567
568 if (freeme)
569 mpt_free_msg_frame(ioc, mf);
570 mb();
571}
572
573/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
574/**
575 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
576 * @irq: irq number (not used)
577 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
578 *
579 * This routine is registered via the request_irq() kernel API call,
580 * and handles all interrupts generated from a specific MPT adapter
581 * (also referred to as a IO Controller or IOC).
582 * This routine must clear the interrupt from the adapter and does
583 * so by reading the reply FIFO. Multiple replies may be processed
584 * per single call to this routine.
585 *
586 * This routine handles register-level access of the adapter but
587 * dispatches (calls) a protocol-specific callback routine to handle
588 * the protocol-specific details of the MPT request completion.
589 */
590static irqreturn_t
591mpt_interrupt(int irq, void *bus_id)
592{
593 MPT_ADAPTER *ioc = bus_id;
594 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
595
596 if (pa == 0xFFFFFFFF)
597 return IRQ_NONE;
598
599 /*
600 * Drain the reply FIFO!
601 */
602 do {
603 if (pa & MPI_ADDRESS_REPLY_A_BIT)
604 mpt_reply(ioc, pa);
605 else
606 mpt_turbo_reply(ioc, pa);
607 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
608 } while (pa != 0xFFFFFFFF);
609
610 return IRQ_HANDLED;
611}
612
613/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
614/**
615 * mptbase_reply - MPT base driver's callback routine
616 * @ioc: Pointer to MPT_ADAPTER structure
617 * @req: Pointer to original MPT request frame
618 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
619 *
620 * MPT base driver's callback routine; all base driver
621 * "internal" request/reply processing is routed here.
622 * Currently used for EventNotification and EventAck handling.
623 *
624 * Returns 1 indicating original alloc'd request frame ptr
625 * should be freed, or 0 if it shouldn't.
626 */
627static int
628mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
629{
630 EventNotificationReply_t *pEventReply;
631 u8 event;
632 int evHandlers;
633 int freereq = 1;
634
635 switch (reply->u.hdr.Function) {
636 case MPI_FUNCTION_EVENT_NOTIFICATION:
637 pEventReply = (EventNotificationReply_t *)reply;
638 evHandlers = 0;
639 ProcessEventNotification(ioc, pEventReply, &evHandlers);
640 event = le32_to_cpu(pEventReply->Event) & 0xFF;
641 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
642 freereq = 0;
643 if (event != MPI_EVENT_EVENT_CHANGE)
644 break;
645 case MPI_FUNCTION_CONFIG:
646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
649 memcpy(ioc->mptbase_cmds.reply, reply,
650 min(MPT_DEFAULT_FRAME_SIZE,
651 4 * reply->u.reply.MsgLength));
652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
654 complete(&ioc->mptbase_cmds.done);
655 } else
656 freereq = 0;
657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
658 freereq = 1;
659 break;
660 case MPI_FUNCTION_EVENT_ACK:
661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
662 "EventAck reply received\n", ioc->name));
663 break;
664 default:
665 printk(MYIOC_s_ERR_FMT
666 "Unexpected msg function (=%02Xh) reply received!\n",
667 ioc->name, reply->u.hdr.Function);
668 break;
669 }
670
671 /*
672 * Conditionally tell caller to free the original
673 * EventNotification/EventAck/unexpected request frame!
674 */
675 return freereq;
676}
677
678/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
679/**
680 * mpt_register - Register protocol-specific main callback handler.
681 * @cbfunc: callback function pointer
682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
683 * @func_name: call function's name
684 *
685 * This routine is called by a protocol-specific driver (SCSI host,
686 * LAN, SCSI target) to register its reply callback routine. Each
687 * protocol-specific driver must do this before it will be able to
688 * use any IOC resources, such as obtaining request frames.
689 *
690 * NOTES: The SCSI protocol driver currently calls this routine thrice
691 * in order to register separate callbacks; one for "normal" SCSI IO;
692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
693 *
694 * Returns u8 valued "handle" in the range (and S.O.D. order)
695 * {N,...,7,6,5,...,1} if successful.
696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
697 * considered an error by the caller.
698 */
699u8
700mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
701{
702 u8 cb_idx;
703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
704
705 /*
706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
707 * (slot/handle 0 is reserved!)
708 */
709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
710 if (MptCallbacks[cb_idx] == NULL) {
711 MptCallbacks[cb_idx] = cbfunc;
712 MptDriverClass[cb_idx] = dclass;
713 MptEvHandlers[cb_idx] = NULL;
714 last_drv_idx = cb_idx;
715 strlcpy(MptCallbacksName[cb_idx], func_name,
716 MPT_MAX_CALLBACKNAME_LEN+1);
717 break;
718 }
719 }
720
721 return last_drv_idx;
722}
723
724/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
725/**
726 * mpt_deregister - Deregister a protocol drivers resources.
727 * @cb_idx: previously registered callback handle
728 *
729 * Each protocol-specific driver should call this routine when its
730 * module is unloaded.
731 */
732void
733mpt_deregister(u8 cb_idx)
734{
735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
736 MptCallbacks[cb_idx] = NULL;
737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
738 MptEvHandlers[cb_idx] = NULL;
739
740 last_drv_idx++;
741 }
742}
743
744/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
745/**
746 * mpt_event_register - Register protocol-specific event callback handler.
747 * @cb_idx: previously registered (via mpt_register) callback handle
748 * @ev_cbfunc: callback function
749 *
750 * This routine can be called by one or more protocol-specific drivers
751 * if/when they choose to be notified of MPT events.
752 *
753 * Returns 0 for success.
754 */
755int
756mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
757{
758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
759 return -1;
760
761 MptEvHandlers[cb_idx] = ev_cbfunc;
762 return 0;
763}
764
765/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
766/**
767 * mpt_event_deregister - Deregister protocol-specific event callback handler
768 * @cb_idx: previously registered callback handle
769 *
770 * Each protocol-specific driver should call this routine
771 * when it does not (or can no longer) handle events,
772 * or when its module is unloaded.
773 */
774void
775mpt_event_deregister(u8 cb_idx)
776{
777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
778 return;
779
780 MptEvHandlers[cb_idx] = NULL;
781}
782
783/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
784/**
785 * mpt_reset_register - Register protocol-specific IOC reset handler.
786 * @cb_idx: previously registered (via mpt_register) callback handle
787 * @reset_func: reset function
788 *
789 * This routine can be called by one or more protocol-specific drivers
790 * if/when they choose to be notified of IOC resets.
791 *
792 * Returns 0 for success.
793 */
794int
795mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
796{
797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
798 return -1;
799
800 MptResetHandlers[cb_idx] = reset_func;
801 return 0;
802}
803
804/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
805/**
806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
807 * @cb_idx: previously registered callback handle
808 *
809 * Each protocol-specific driver should call this routine
810 * when it does not (or can no longer) handle IOC reset handling,
811 * or when its module is unloaded.
812 */
813void
814mpt_reset_deregister(u8 cb_idx)
815{
816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
817 return;
818
819 MptResetHandlers[cb_idx] = NULL;
820}
821
822/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
823/**
824 * mpt_device_driver_register - Register device driver hooks
825 * @dd_cbfunc: driver callbacks struct
826 * @cb_idx: MPT protocol driver index
827 */
828int
829mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
830{
831 MPT_ADAPTER *ioc;
832 const struct pci_device_id *id;
833
834 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
835 return -EINVAL;
836
837 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
838
839 /* call per pci device probe entry point */
840 list_for_each_entry(ioc, &ioc_list, list) {
841 id = ioc->pcidev->driver ?
842 ioc->pcidev->driver->id_table : NULL;
843 if (dd_cbfunc->probe)
844 dd_cbfunc->probe(ioc->pcidev, id);
845 }
846
847 return 0;
848}
849
850/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
851/**
852 * mpt_device_driver_deregister - DeRegister device driver hooks
853 * @cb_idx: MPT protocol driver index
854 */
855void
856mpt_device_driver_deregister(u8 cb_idx)
857{
858 struct mpt_pci_driver *dd_cbfunc;
859 MPT_ADAPTER *ioc;
860
861 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
862 return;
863
864 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
865
866 list_for_each_entry(ioc, &ioc_list, list) {
867 if (dd_cbfunc->remove)
868 dd_cbfunc->remove(ioc->pcidev);
869 }
870
871 MptDeviceDriverHandlers[cb_idx] = NULL;
872}
873
874
875/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
876/**
877 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
878 * @cb_idx: Handle of registered MPT protocol driver
879 * @ioc: Pointer to MPT adapter structure
880 *
881 * Obtain an MPT request frame from the pool (of 1024) that are
882 * allocated per MPT adapter.
883 *
884 * Returns pointer to a MPT request frame or %NULL if none are available
885 * or IOC is not active.
886 */
887MPT_FRAME_HDR*
888mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
889{
890 MPT_FRAME_HDR *mf;
891 unsigned long flags;
892 u16 req_idx; /* Request index */
893
894 /* validate handle and ioc identifier */
895
896#ifdef MFCNT
897 if (!ioc->active)
898 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
899 "returning NULL!\n", ioc->name);
900#endif
901
902 /* If interrupts are not attached, do not return a request frame */
903 if (!ioc->active)
904 return NULL;
905
906 spin_lock_irqsave(&ioc->FreeQlock, flags);
907 if (!list_empty(&ioc->FreeQ)) {
908 int req_offset;
909
910 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
911 u.frame.linkage.list);
912 list_del(&mf->u.frame.linkage.list);
913 mf->u.frame.linkage.arg1 = 0;
914 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
915 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
916 /* u16! */
917 req_idx = req_offset / ioc->req_sz;
918 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
919 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
920 /* Default, will be changed if necessary in SG generation */
921 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
922#ifdef MFCNT
923 ioc->mfcnt++;
924#endif
925 }
926 else
927 mf = NULL;
928 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
929
930#ifdef MFCNT
931 if (mf == NULL)
932 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
933 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
934 ioc->req_depth);
935 mfcounter++;
936 if (mfcounter == PRINT_MF_COUNT)
937 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
938 ioc->mfcnt, ioc->req_depth);
939#endif
940
941 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
942 ioc->name, cb_idx, ioc->id, mf));
943 return mf;
944}
945
946/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
947/**
948 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
949 * @cb_idx: Handle of registered MPT protocol driver
950 * @ioc: Pointer to MPT adapter structure
951 * @mf: Pointer to MPT request frame
952 *
953 * This routine posts an MPT request frame to the request post FIFO of a
954 * specific MPT adapter.
955 */
956void
957mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
958{
959 u32 mf_dma_addr;
960 int req_offset;
961 u16 req_idx; /* Request index */
962
963 /* ensure values are reset properly! */
964 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
965 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
966 /* u16! */
967 req_idx = req_offset / ioc->req_sz;
968 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
969 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
970
971 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
972
973 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
974 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
975 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
976 ioc->RequestNB[req_idx]));
977 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
978}
979
980/**
981 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
982 * @cb_idx: Handle of registered MPT protocol driver
983 * @ioc: Pointer to MPT adapter structure
984 * @mf: Pointer to MPT request frame
985 *
986 * Send a protocol-specific MPT request frame to an IOC using
987 * hi-priority request queue.
988 *
989 * This routine posts an MPT request frame to the request post FIFO of a
990 * specific MPT adapter.
991 **/
992void
993mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
994{
995 u32 mf_dma_addr;
996 int req_offset;
997 u16 req_idx; /* Request index */
998
999 /* ensure values are reset properly! */
1000 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1001 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1002 req_idx = req_offset / ioc->req_sz;
1003 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1004 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1005
1006 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1007
1008 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1009 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1010 ioc->name, mf_dma_addr, req_idx));
1011 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1012}
1013
1014/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1015/**
1016 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1017 * @ioc: Pointer to MPT adapter structure
1018 * @mf: Pointer to MPT request frame
1019 *
1020 * This routine places a MPT request frame back on the MPT adapter's
1021 * FreeQ.
1022 */
1023void
1024mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1025{
1026 unsigned long flags;
1027
1028 /* Put Request back on FreeQ! */
1029 spin_lock_irqsave(&ioc->FreeQlock, flags);
1030 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1031 goto out;
1032 /* signature to know if this mf is freed */
1033 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1034 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1035#ifdef MFCNT
1036 ioc->mfcnt--;
1037#endif
1038 out:
1039 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1040}
1041
1042/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1043/**
1044 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1045 * @pAddr: virtual address for SGE
1046 * @flagslength: SGE flags and data transfer length
1047 * @dma_addr: Physical address
1048 *
1049 * This routine places a MPT request frame back on the MPT adapter's
1050 * FreeQ.
1051 */
1052static void
1053mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1054{
1055 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1056 pSge->FlagsLength = cpu_to_le32(flagslength);
1057 pSge->Address = cpu_to_le32(dma_addr);
1058}
1059
1060/**
1061 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1062 * @pAddr: virtual address for SGE
1063 * @flagslength: SGE flags and data transfer length
1064 * @dma_addr: Physical address
1065 *
1066 * This routine places a MPT request frame back on the MPT adapter's
1067 * FreeQ.
1068 **/
1069static void
1070mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1071{
1072 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1073 pSge->Address.Low = cpu_to_le32
1074 (lower_32_bits(dma_addr));
1075 pSge->Address.High = cpu_to_le32
1076 (upper_32_bits(dma_addr));
1077 pSge->FlagsLength = cpu_to_le32
1078 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1079}
1080
1081/**
1082 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1083 * @pAddr: virtual address for SGE
1084 * @flagslength: SGE flags and data transfer length
1085 * @dma_addr: Physical address
1086 *
1087 * This routine places a MPT request frame back on the MPT adapter's
1088 * FreeQ.
1089 **/
1090static void
1091mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1092{
1093 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1094 u32 tmp;
1095
1096 pSge->Address.Low = cpu_to_le32
1097 (lower_32_bits(dma_addr));
1098 tmp = (u32)(upper_32_bits(dma_addr));
1099
1100 /*
1101 * 1078 errata workaround for the 36GB limitation
1102 */
1103 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1104 flagslength |=
1105 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1106 tmp |= (1<<31);
1107 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1108 printk(KERN_DEBUG "1078 P0M2 addressing for "
1109 "addr = 0x%llx len = %d\n",
1110 (unsigned long long)dma_addr,
1111 MPI_SGE_LENGTH(flagslength));
1112 }
1113
1114 pSge->Address.High = cpu_to_le32(tmp);
1115 pSge->FlagsLength = cpu_to_le32(
1116 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1117}
1118
1119/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1120/**
1121 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1122 * @pAddr: virtual address for SGE
1123 * @next: nextChainOffset value (u32's)
1124 * @length: length of next SGL segment
1125 * @dma_addr: Physical address
1126 *
1127 */
1128static void
1129mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1130{
1131 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1132 pChain->Length = cpu_to_le16(length);
1133 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1134 pChain->NextChainOffset = next;
1135 pChain->Address = cpu_to_le32(dma_addr);
1136}
1137
1138/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1139/**
1140 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1141 * @pAddr: virtual address for SGE
1142 * @next: nextChainOffset value (u32's)
1143 * @length: length of next SGL segment
1144 * @dma_addr: Physical address
1145 *
1146 */
1147static void
1148mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1149{
1150 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1151 u32 tmp = dma_addr & 0xFFFFFFFF;
1152
1153 pChain->Length = cpu_to_le16(length);
1154 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1155 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1156
1157 pChain->NextChainOffset = next;
1158
1159 pChain->Address.Low = cpu_to_le32(tmp);
1160 tmp = (u32)(upper_32_bits(dma_addr));
1161 pChain->Address.High = cpu_to_le32(tmp);
1162}
1163
1164/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1165/**
1166 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1167 * @cb_idx: Handle of registered MPT protocol driver
1168 * @ioc: Pointer to MPT adapter structure
1169 * @reqBytes: Size of the request in bytes
1170 * @req: Pointer to MPT request frame
1171 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1172 *
1173 * This routine is used exclusively to send MptScsiTaskMgmt
1174 * requests since they are required to be sent via doorbell handshake.
1175 *
1176 * NOTE: It is the callers responsibility to byte-swap fields in the
1177 * request which are greater than 1 byte in size.
1178 *
1179 * Returns 0 for success, non-zero for failure.
1180 */
1181int
1182mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1183{
1184 int r = 0;
1185 u8 *req_as_bytes;
1186 int ii;
1187
1188 /* State is known to be good upon entering
1189 * this function so issue the bus reset
1190 * request.
1191 */
1192
1193 /*
1194 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1195 * setting cb_idx/req_idx. But ONLY if this request
1196 * is in proper (pre-alloc'd) request buffer range...
1197 */
1198 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1199 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1200 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1201 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1202 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1203 }
1204
1205 /* Make sure there are no doorbells */
1206 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1207
1208 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1209 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1210 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1211
1212 /* Wait for IOC doorbell int */
1213 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1214 return ii;
1215 }
1216
1217 /* Read doorbell and check for active bit */
1218 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1219 return -5;
1220
1221 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1222 ioc->name, ii));
1223
1224 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1225
1226 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1227 return -2;
1228 }
1229
1230 /* Send request via doorbell handshake */
1231 req_as_bytes = (u8 *) req;
1232 for (ii = 0; ii < reqBytes/4; ii++) {
1233 u32 word;
1234
1235 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1236 (req_as_bytes[(ii*4) + 1] << 8) |
1237 (req_as_bytes[(ii*4) + 2] << 16) |
1238 (req_as_bytes[(ii*4) + 3] << 24));
1239 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1240 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1241 r = -3;
1242 break;
1243 }
1244 }
1245
1246 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1247 r = 0;
1248 else
1249 r = -4;
1250
1251 /* Make sure there are no doorbells */
1252 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1253
1254 return r;
1255}
1256
1257/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1258/**
1259 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1260 * @ioc: Pointer to MPT adapter structure
1261 * @access_control_value: define bits below
1262 * @sleepFlag: Specifies whether the process can sleep
1263 *
1264 * Provides mechanism for the host driver to control the IOC's
1265 * Host Page Buffer access.
1266 *
1267 * Access Control Value - bits[15:12]
1268 * 0h Reserved
1269 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1270 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1271 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1272 *
1273 * Returns 0 for success, non-zero for failure.
1274 */
1275
1276static int
1277mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1278{
1279 int r = 0;
1280
1281 /* return if in use */
1282 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1283 & MPI_DOORBELL_ACTIVE)
1284 return -1;
1285
1286 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1287
1288 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1289 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1290 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1291 (access_control_value<<12)));
1292
1293 /* Wait for IOC to clear Doorbell Status bit */
1294 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1295 return -2;
1296 }else
1297 return 0;
1298}
1299
1300/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1301/**
1302 * mpt_host_page_alloc - allocate system memory for the fw
1303 * @ioc: Pointer to pointer to IOC adapter
1304 * @ioc_init: Pointer to ioc init config page
1305 *
1306 * If we already allocated memory in past, then resend the same pointer.
1307 * Returns 0 for success, non-zero for failure.
1308 */
1309static int
1310mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1311{
1312 char *psge;
1313 int flags_length;
1314 u32 host_page_buffer_sz=0;
1315
1316 if(!ioc->HostPageBuffer) {
1317
1318 host_page_buffer_sz =
1319 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1320
1321 if(!host_page_buffer_sz)
1322 return 0; /* fw doesn't need any host buffers */
1323
1324 /* spin till we get enough memory */
1325 while(host_page_buffer_sz > 0) {
1326
1327 if((ioc->HostPageBuffer = pci_alloc_consistent(
1328 ioc->pcidev,
1329 host_page_buffer_sz,
1330 &ioc->HostPageBuffer_dma)) != NULL) {
1331
1332 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1333 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1334 ioc->name, ioc->HostPageBuffer,
1335 (u32)ioc->HostPageBuffer_dma,
1336 host_page_buffer_sz));
1337 ioc->alloc_total += host_page_buffer_sz;
1338 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1339 break;
1340 }
1341
1342 host_page_buffer_sz -= (4*1024);
1343 }
1344 }
1345
1346 if(!ioc->HostPageBuffer) {
1347 printk(MYIOC_s_ERR_FMT
1348 "Failed to alloc memory for host_page_buffer!\n",
1349 ioc->name);
1350 return -999;
1351 }
1352
1353 psge = (char *)&ioc_init->HostPageBufferSGE;
1354 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1355 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1356 MPI_SGE_FLAGS_HOST_TO_IOC |
1357 MPI_SGE_FLAGS_END_OF_BUFFER;
1358 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1359 flags_length |= ioc->HostPageBuffer_sz;
1360 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1361 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1362
1363return 0;
1364}
1365
1366/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1367/**
1368 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1369 * @iocid: IOC unique identifier (integer)
1370 * @iocpp: Pointer to pointer to IOC adapter
1371 *
1372 * Given a unique IOC identifier, set pointer to the associated MPT
1373 * adapter structure.
1374 *
1375 * Returns iocid and sets iocpp if iocid is found.
1376 * Returns -1 if iocid is not found.
1377 */
1378int
1379mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1380{
1381 MPT_ADAPTER *ioc;
1382
1383 list_for_each_entry(ioc,&ioc_list,list) {
1384 if (ioc->id == iocid) {
1385 *iocpp =ioc;
1386 return iocid;
1387 }
1388 }
1389
1390 *iocpp = NULL;
1391 return -1;
1392}
1393
1394/**
1395 * mpt_get_product_name - returns product string
1396 * @vendor: pci vendor id
1397 * @device: pci device id
1398 * @revision: pci revision id
1399 *
1400 * Returns product string displayed when driver loads,
1401 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1402 *
1403 **/
1404static const char*
1405mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1406{
1407 char *product_str = NULL;
1408
1409 if (vendor == PCI_VENDOR_ID_BROCADE) {
1410 switch (device)
1411 {
1412 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1413 switch (revision)
1414 {
1415 case 0x00:
1416 product_str = "BRE040 A0";
1417 break;
1418 case 0x01:
1419 product_str = "BRE040 A1";
1420 break;
1421 default:
1422 product_str = "BRE040";
1423 break;
1424 }
1425 break;
1426 }
1427 goto out;
1428 }
1429
1430 switch (device)
1431 {
1432 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1433 product_str = "LSIFC909 B1";
1434 break;
1435 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1436 product_str = "LSIFC919 B0";
1437 break;
1438 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1439 product_str = "LSIFC929 B0";
1440 break;
1441 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1442 if (revision < 0x80)
1443 product_str = "LSIFC919X A0";
1444 else
1445 product_str = "LSIFC919XL A1";
1446 break;
1447 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1448 if (revision < 0x80)
1449 product_str = "LSIFC929X A0";
1450 else
1451 product_str = "LSIFC929XL A1";
1452 break;
1453 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1454 product_str = "LSIFC939X A1";
1455 break;
1456 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1457 product_str = "LSIFC949X A1";
1458 break;
1459 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1460 switch (revision)
1461 {
1462 case 0x00:
1463 product_str = "LSIFC949E A0";
1464 break;
1465 case 0x01:
1466 product_str = "LSIFC949E A1";
1467 break;
1468 default:
1469 product_str = "LSIFC949E";
1470 break;
1471 }
1472 break;
1473 case MPI_MANUFACTPAGE_DEVID_53C1030:
1474 switch (revision)
1475 {
1476 case 0x00:
1477 product_str = "LSI53C1030 A0";
1478 break;
1479 case 0x01:
1480 product_str = "LSI53C1030 B0";
1481 break;
1482 case 0x03:
1483 product_str = "LSI53C1030 B1";
1484 break;
1485 case 0x07:
1486 product_str = "LSI53C1030 B2";
1487 break;
1488 case 0x08:
1489 product_str = "LSI53C1030 C0";
1490 break;
1491 case 0x80:
1492 product_str = "LSI53C1030T A0";
1493 break;
1494 case 0x83:
1495 product_str = "LSI53C1030T A2";
1496 break;
1497 case 0x87:
1498 product_str = "LSI53C1030T A3";
1499 break;
1500 case 0xc1:
1501 product_str = "LSI53C1020A A1";
1502 break;
1503 default:
1504 product_str = "LSI53C1030";
1505 break;
1506 }
1507 break;
1508 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1509 switch (revision)
1510 {
1511 case 0x03:
1512 product_str = "LSI53C1035 A2";
1513 break;
1514 case 0x04:
1515 product_str = "LSI53C1035 B0";
1516 break;
1517 default:
1518 product_str = "LSI53C1035";
1519 break;
1520 }
1521 break;
1522 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1523 switch (revision)
1524 {
1525 case 0x00:
1526 product_str = "LSISAS1064 A1";
1527 break;
1528 case 0x01:
1529 product_str = "LSISAS1064 A2";
1530 break;
1531 case 0x02:
1532 product_str = "LSISAS1064 A3";
1533 break;
1534 case 0x03:
1535 product_str = "LSISAS1064 A4";
1536 break;
1537 default:
1538 product_str = "LSISAS1064";
1539 break;
1540 }
1541 break;
1542 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1543 switch (revision)
1544 {
1545 case 0x00:
1546 product_str = "LSISAS1064E A0";
1547 break;
1548 case 0x01:
1549 product_str = "LSISAS1064E B0";
1550 break;
1551 case 0x02:
1552 product_str = "LSISAS1064E B1";
1553 break;
1554 case 0x04:
1555 product_str = "LSISAS1064E B2";
1556 break;
1557 case 0x08:
1558 product_str = "LSISAS1064E B3";
1559 break;
1560 default:
1561 product_str = "LSISAS1064E";
1562 break;
1563 }
1564 break;
1565 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1566 switch (revision)
1567 {
1568 case 0x00:
1569 product_str = "LSISAS1068 A0";
1570 break;
1571 case 0x01:
1572 product_str = "LSISAS1068 B0";
1573 break;
1574 case 0x02:
1575 product_str = "LSISAS1068 B1";
1576 break;
1577 default:
1578 product_str = "LSISAS1068";
1579 break;
1580 }
1581 break;
1582 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1583 switch (revision)
1584 {
1585 case 0x00:
1586 product_str = "LSISAS1068E A0";
1587 break;
1588 case 0x01:
1589 product_str = "LSISAS1068E B0";
1590 break;
1591 case 0x02:
1592 product_str = "LSISAS1068E B1";
1593 break;
1594 case 0x04:
1595 product_str = "LSISAS1068E B2";
1596 break;
1597 case 0x08:
1598 product_str = "LSISAS1068E B3";
1599 break;
1600 default:
1601 product_str = "LSISAS1068E";
1602 break;
1603 }
1604 break;
1605 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1606 switch (revision)
1607 {
1608 case 0x00:
1609 product_str = "LSISAS1078 A0";
1610 break;
1611 case 0x01:
1612 product_str = "LSISAS1078 B0";
1613 break;
1614 case 0x02:
1615 product_str = "LSISAS1078 C0";
1616 break;
1617 case 0x03:
1618 product_str = "LSISAS1078 C1";
1619 break;
1620 case 0x04:
1621 product_str = "LSISAS1078 C2";
1622 break;
1623 default:
1624 product_str = "LSISAS1078";
1625 break;
1626 }
1627 break;
1628 }
1629
1630 out:
1631 return product_str;
1632}
1633
1634/**
1635 * mpt_mapresources - map in memory mapped io
1636 * @ioc: Pointer to pointer to IOC adapter
1637 *
1638 **/
1639static int
1640mpt_mapresources(MPT_ADAPTER *ioc)
1641{
1642 u8 __iomem *mem;
1643 int ii;
1644 resource_size_t mem_phys;
1645 unsigned long port;
1646 u32 msize;
1647 u32 psize;
1648 int r = -ENODEV;
1649 struct pci_dev *pdev;
1650
1651 pdev = ioc->pcidev;
1652 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1653 if (pci_enable_device_mem(pdev)) {
1654 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1655 "failed\n", ioc->name);
1656 return r;
1657 }
1658 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1659 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1660 "MEM failed\n", ioc->name);
1661 goto out_pci_disable_device;
1662 }
1663
1664 if (sizeof(dma_addr_t) > 4) {
1665 const uint64_t required_mask = dma_get_required_mask
1666 (&pdev->dev);
1667 if (required_mask > DMA_BIT_MASK(32)
1668 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1669 && !pci_set_consistent_dma_mask(pdev,
1670 DMA_BIT_MASK(64))) {
1671 ioc->dma_mask = DMA_BIT_MASK(64);
1672 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1673 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1674 ioc->name));
1675 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1676 && !pci_set_consistent_dma_mask(pdev,
1677 DMA_BIT_MASK(32))) {
1678 ioc->dma_mask = DMA_BIT_MASK(32);
1679 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1680 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1681 ioc->name));
1682 } else {
1683 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1684 ioc->name, pci_name(pdev));
1685 goto out_pci_release_region;
1686 }
1687 } else {
1688 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1689 && !pci_set_consistent_dma_mask(pdev,
1690 DMA_BIT_MASK(32))) {
1691 ioc->dma_mask = DMA_BIT_MASK(32);
1692 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1693 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1694 ioc->name));
1695 } else {
1696 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1697 ioc->name, pci_name(pdev));
1698 goto out_pci_release_region;
1699 }
1700 }
1701
1702 mem_phys = msize = 0;
1703 port = psize = 0;
1704 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1705 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1706 if (psize)
1707 continue;
1708 /* Get I/O space! */
1709 port = pci_resource_start(pdev, ii);
1710 psize = pci_resource_len(pdev, ii);
1711 } else {
1712 if (msize)
1713 continue;
1714 /* Get memmap */
1715 mem_phys = pci_resource_start(pdev, ii);
1716 msize = pci_resource_len(pdev, ii);
1717 }
1718 }
1719 ioc->mem_size = msize;
1720
1721 mem = NULL;
1722 /* Get logical ptr for PciMem0 space */
1723 /*mem = ioremap(mem_phys, msize);*/
1724 mem = ioremap(mem_phys, msize);
1725 if (mem == NULL) {
1726 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1727 " memory!\n", ioc->name);
1728 r = -EINVAL;
1729 goto out_pci_release_region;
1730 }
1731 ioc->memmap = mem;
1732 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1733 ioc->name, mem, (unsigned long long)mem_phys));
1734
1735 ioc->mem_phys = mem_phys;
1736 ioc->chip = (SYSIF_REGS __iomem *)mem;
1737
1738 /* Save Port IO values in case we need to do downloadboot */
1739 ioc->pio_mem_phys = port;
1740 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1741
1742 return 0;
1743
1744out_pci_release_region:
1745 pci_release_selected_regions(pdev, ioc->bars);
1746out_pci_disable_device:
1747 pci_disable_device(pdev);
1748 return r;
1749}
1750
1751/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1752/**
1753 * mpt_attach - Install a PCI intelligent MPT adapter.
1754 * @pdev: Pointer to pci_dev structure
1755 * @id: PCI device ID information
1756 *
1757 * This routine performs all the steps necessary to bring the IOC of
1758 * a MPT adapter to a OPERATIONAL state. This includes registering
1759 * memory regions, registering the interrupt, and allocating request
1760 * and reply memory pools.
1761 *
1762 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1763 * MPT adapter.
1764 *
1765 * Returns 0 for success, non-zero for failure.
1766 *
1767 * TODO: Add support for polled controllers
1768 */
1769int
1770mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1771{
1772 MPT_ADAPTER *ioc;
1773 u8 cb_idx;
1774 int r = -ENODEV;
1775 u8 pcixcmd;
1776 static int mpt_ids = 0;
1777#ifdef CONFIG_PROC_FS
1778 struct proc_dir_entry *dent;
1779#endif
1780
1781 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
1782 if (ioc == NULL) {
1783 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1784 return -ENOMEM;
1785 }
1786
1787 ioc->id = mpt_ids++;
1788 sprintf(ioc->name, "ioc%d", ioc->id);
1789 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1790
1791 /*
1792 * set initial debug level
1793 * (refer to mptdebug.h)
1794 *
1795 */
1796 ioc->debug_level = mpt_debug_level;
1797 if (mpt_debug_level)
1798 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1799
1800 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1801
1802 ioc->pcidev = pdev;
1803 if (mpt_mapresources(ioc)) {
1804 goto out_free_ioc;
1805 }
1806
1807 /*
1808 * Setting up proper handlers for scatter gather handling
1809 */
1810 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1811 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1812 ioc->add_sge = &mpt_add_sge_64bit_1078;
1813 else
1814 ioc->add_sge = &mpt_add_sge_64bit;
1815 ioc->add_chain = &mpt_add_chain_64bit;
1816 ioc->sg_addr_size = 8;
1817 } else {
1818 ioc->add_sge = &mpt_add_sge;
1819 ioc->add_chain = &mpt_add_chain;
1820 ioc->sg_addr_size = 4;
1821 }
1822 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1823
1824 ioc->alloc_total = sizeof(MPT_ADAPTER);
1825 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1826 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1827
1828
1829 spin_lock_init(&ioc->taskmgmt_lock);
1830 mutex_init(&ioc->internal_cmds.mutex);
1831 init_completion(&ioc->internal_cmds.done);
1832 mutex_init(&ioc->mptbase_cmds.mutex);
1833 init_completion(&ioc->mptbase_cmds.done);
1834 mutex_init(&ioc->taskmgmt_cmds.mutex);
1835 init_completion(&ioc->taskmgmt_cmds.done);
1836
1837 /* Initialize the event logging.
1838 */
1839 ioc->eventTypes = 0; /* None */
1840 ioc->eventContext = 0;
1841 ioc->eventLogSize = 0;
1842 ioc->events = NULL;
1843
1844#ifdef MFCNT
1845 ioc->mfcnt = 0;
1846#endif
1847
1848 ioc->sh = NULL;
1849 ioc->cached_fw = NULL;
1850
1851 /* Initialize SCSI Config Data structure
1852 */
1853 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1854
1855 /* Initialize the fc rport list head.
1856 */
1857 INIT_LIST_HEAD(&ioc->fc_rports);
1858
1859 /* Find lookup slot. */
1860 INIT_LIST_HEAD(&ioc->list);
1861
1862
1863 /* Initialize workqueue */
1864 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1865
1866 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1867 "mpt_poll_%d", ioc->id);
1868 ioc->reset_work_q = alloc_workqueue(ioc->reset_work_q_name,
1869 WQ_MEM_RECLAIM, 0);
1870 if (!ioc->reset_work_q) {
1871 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1872 ioc->name);
1873 r = -ENOMEM;
1874 goto out_unmap_resources;
1875 }
1876
1877 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1878 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1879
1880 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1881 pdev->revision);
1882
1883 switch (pdev->device)
1884 {
1885 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1886 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1887 ioc->errata_flag_1064 = 1;
1888 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1889 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1890 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1891 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1892 ioc->bus_type = FC;
1893 break;
1894
1895 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1896 if (pdev->revision < XL_929) {
1897 /* 929X Chip Fix. Set Split transactions level
1898 * for PCIX. Set MOST bits to zero.
1899 */
1900 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1901 pcixcmd &= 0x8F;
1902 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1903 } else {
1904 /* 929XL Chip Fix. Set MMRBC to 0x08.
1905 */
1906 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1907 pcixcmd |= 0x08;
1908 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1909 }
1910 ioc->bus_type = FC;
1911 break;
1912
1913 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1914 /* 919X Chip Fix. Set Split transactions level
1915 * for PCIX. Set MOST bits to zero.
1916 */
1917 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1918 pcixcmd &= 0x8F;
1919 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1920 ioc->bus_type = FC;
1921 break;
1922
1923 case MPI_MANUFACTPAGE_DEVID_53C1030:
1924 /* 1030 Chip Fix. Disable Split transactions
1925 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1926 */
1927 if (pdev->revision < C0_1030) {
1928 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1929 pcixcmd &= 0x8F;
1930 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1931 }
1932
1933 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1934 ioc->bus_type = SPI;
1935 break;
1936
1937 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1938 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1939 ioc->errata_flag_1064 = 1;
1940 ioc->bus_type = SAS;
1941 break;
1942
1943 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1944 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1945 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1946 ioc->bus_type = SAS;
1947 break;
1948 }
1949
1950
1951 switch (ioc->bus_type) {
1952
1953 case SAS:
1954 ioc->msi_enable = mpt_msi_enable_sas;
1955 break;
1956
1957 case SPI:
1958 ioc->msi_enable = mpt_msi_enable_spi;
1959 break;
1960
1961 case FC:
1962 ioc->msi_enable = mpt_msi_enable_fc;
1963 break;
1964
1965 default:
1966 ioc->msi_enable = 0;
1967 break;
1968 }
1969
1970 ioc->fw_events_off = 1;
1971
1972 if (ioc->errata_flag_1064)
1973 pci_disable_io_access(pdev);
1974
1975 spin_lock_init(&ioc->FreeQlock);
1976
1977 /* Disable all! */
1978 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1979 ioc->active = 0;
1980 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1981
1982 /* Set IOC ptr in the pcidev's driver data. */
1983 pci_set_drvdata(ioc->pcidev, ioc);
1984
1985 /* Set lookup ptr. */
1986 list_add_tail(&ioc->list, &ioc_list);
1987
1988 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1989 */
1990 mpt_detect_bound_ports(ioc, pdev);
1991
1992 INIT_LIST_HEAD(&ioc->fw_event_list);
1993 spin_lock_init(&ioc->fw_event_lock);
1994 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1995 ioc->fw_event_q = alloc_workqueue(ioc->fw_event_q_name,
1996 WQ_MEM_RECLAIM, 0);
1997 if (!ioc->fw_event_q) {
1998 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1999 ioc->name);
2000 r = -ENOMEM;
2001 goto out_remove_ioc;
2002 }
2003
2004 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2005 CAN_SLEEP)) != 0){
2006 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2007 ioc->name, r);
2008
2009 destroy_workqueue(ioc->fw_event_q);
2010 ioc->fw_event_q = NULL;
2011
2012 list_del(&ioc->list);
2013 if (ioc->alt_ioc)
2014 ioc->alt_ioc->alt_ioc = NULL;
2015 iounmap(ioc->memmap);
2016 if (pci_is_enabled(pdev))
2017 pci_disable_device(pdev);
2018 if (r != -5)
2019 pci_release_selected_regions(pdev, ioc->bars);
2020
2021 destroy_workqueue(ioc->reset_work_q);
2022 ioc->reset_work_q = NULL;
2023
2024 kfree(ioc);
2025 return r;
2026 }
2027
2028 /* call per device driver probe entry point */
2029 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2030 if(MptDeviceDriverHandlers[cb_idx] &&
2031 MptDeviceDriverHandlers[cb_idx]->probe) {
2032 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2033 }
2034 }
2035
2036#ifdef CONFIG_PROC_FS
2037 /*
2038 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2039 */
2040 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2041 if (dent) {
2042 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
2043 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
2044 }
2045#endif
2046
2047 if (!ioc->alt_ioc)
2048 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2049 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2050
2051 return 0;
2052
2053out_remove_ioc:
2054 list_del(&ioc->list);
2055 if (ioc->alt_ioc)
2056 ioc->alt_ioc->alt_ioc = NULL;
2057
2058 destroy_workqueue(ioc->reset_work_q);
2059 ioc->reset_work_q = NULL;
2060
2061out_unmap_resources:
2062 iounmap(ioc->memmap);
2063 pci_disable_device(pdev);
2064 pci_release_selected_regions(pdev, ioc->bars);
2065
2066out_free_ioc:
2067 kfree(ioc);
2068
2069 return r;
2070}
2071
2072/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2073/**
2074 * mpt_detach - Remove a PCI intelligent MPT adapter.
2075 * @pdev: Pointer to pci_dev structure
2076 */
2077
2078void
2079mpt_detach(struct pci_dev *pdev)
2080{
2081 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2082 char pname[32];
2083 u8 cb_idx;
2084 unsigned long flags;
2085 struct workqueue_struct *wq;
2086
2087 /*
2088 * Stop polling ioc for fault condition
2089 */
2090 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2091 wq = ioc->reset_work_q;
2092 ioc->reset_work_q = NULL;
2093 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2094 cancel_delayed_work(&ioc->fault_reset_work);
2095 destroy_workqueue(wq);
2096
2097 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2098 wq = ioc->fw_event_q;
2099 ioc->fw_event_q = NULL;
2100 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2101 destroy_workqueue(wq);
2102
2103 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2104 remove_proc_entry(pname, NULL);
2105 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2106 remove_proc_entry(pname, NULL);
2107 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2108 remove_proc_entry(pname, NULL);
2109
2110 /* call per device driver remove entry point */
2111 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2112 if(MptDeviceDriverHandlers[cb_idx] &&
2113 MptDeviceDriverHandlers[cb_idx]->remove) {
2114 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2115 }
2116 }
2117
2118 /* Disable interrupts! */
2119 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2120
2121 ioc->active = 0;
2122 synchronize_irq(pdev->irq);
2123
2124 /* Clear any lingering interrupt */
2125 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2126
2127 CHIPREG_READ32(&ioc->chip->IntStatus);
2128
2129 mpt_adapter_dispose(ioc);
2130
2131}
2132
2133/**************************************************************************
2134 * Power Management
2135 */
2136#ifdef CONFIG_PM
2137/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2138/**
2139 * mpt_suspend - Fusion MPT base driver suspend routine.
2140 * @pdev: Pointer to pci_dev structure
2141 * @state: new state to enter
2142 */
2143int
2144mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2145{
2146 u32 device_state;
2147 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2148
2149 device_state = pci_choose_state(pdev, state);
2150 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2151 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2152 device_state);
2153
2154 /* put ioc into READY_STATE */
2155 if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2156 printk(MYIOC_s_ERR_FMT
2157 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2158 }
2159
2160 /* disable interrupts */
2161 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2162 ioc->active = 0;
2163
2164 /* Clear any lingering interrupt */
2165 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2166
2167 free_irq(ioc->pci_irq, ioc);
2168 if (ioc->msi_enable)
2169 pci_disable_msi(ioc->pcidev);
2170 ioc->pci_irq = -1;
2171 pci_save_state(pdev);
2172 pci_disable_device(pdev);
2173 pci_release_selected_regions(pdev, ioc->bars);
2174 pci_set_power_state(pdev, device_state);
2175 return 0;
2176}
2177
2178/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2179/**
2180 * mpt_resume - Fusion MPT base driver resume routine.
2181 * @pdev: Pointer to pci_dev structure
2182 */
2183int
2184mpt_resume(struct pci_dev *pdev)
2185{
2186 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2187 u32 device_state = pdev->current_state;
2188 int recovery_state;
2189 int err;
2190
2191 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2192 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2193 device_state);
2194
2195 pci_set_power_state(pdev, PCI_D0);
2196 pci_enable_wake(pdev, PCI_D0, 0);
2197 pci_restore_state(pdev);
2198 ioc->pcidev = pdev;
2199 err = mpt_mapresources(ioc);
2200 if (err)
2201 return err;
2202
2203 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2204 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2205 ioc->add_sge = &mpt_add_sge_64bit_1078;
2206 else
2207 ioc->add_sge = &mpt_add_sge_64bit;
2208 ioc->add_chain = &mpt_add_chain_64bit;
2209 ioc->sg_addr_size = 8;
2210 } else {
2211
2212 ioc->add_sge = &mpt_add_sge;
2213 ioc->add_chain = &mpt_add_chain;
2214 ioc->sg_addr_size = 4;
2215 }
2216 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2217
2218 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2219 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2220 CHIPREG_READ32(&ioc->chip->Doorbell));
2221
2222 /*
2223 * Errata workaround for SAS pci express:
2224 * Upon returning to the D0 state, the contents of the doorbell will be
2225 * stale data, and this will incorrectly signal to the host driver that
2226 * the firmware is ready to process mpt commands. The workaround is
2227 * to issue a diagnostic reset.
2228 */
2229 if (ioc->bus_type == SAS && (pdev->device ==
2230 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2231 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2232 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2233 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2234 ioc->name);
2235 goto out;
2236 }
2237 }
2238
2239 /* bring ioc to operational state */
2240 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2241 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2242 CAN_SLEEP);
2243 if (recovery_state != 0)
2244 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2245 "error:[%x]\n", ioc->name, recovery_state);
2246 else
2247 printk(MYIOC_s_INFO_FMT
2248 "pci-resume: success\n", ioc->name);
2249 out:
2250 return 0;
2251
2252}
2253#endif
2254
2255static int
2256mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2257{
2258 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2259 ioc->bus_type != SPI) ||
2260 (MptDriverClass[index] == MPTFC_DRIVER &&
2261 ioc->bus_type != FC) ||
2262 (MptDriverClass[index] == MPTSAS_DRIVER &&
2263 ioc->bus_type != SAS))
2264 /* make sure we only call the relevant reset handler
2265 * for the bus */
2266 return 0;
2267 return (MptResetHandlers[index])(ioc, reset_phase);
2268}
2269
2270/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2271/**
2272 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2273 * @ioc: Pointer to MPT adapter structure
2274 * @reason: Event word / reason
2275 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2276 *
2277 * This routine performs all the steps necessary to bring the IOC
2278 * to a OPERATIONAL state.
2279 *
2280 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2281 * MPT adapter.
2282 *
2283 * Returns:
2284 * 0 for success
2285 * -1 if failed to get board READY
2286 * -2 if READY but IOCFacts Failed
2287 * -3 if READY but PrimeIOCFifos Failed
2288 * -4 if READY but IOCInit Failed
2289 * -5 if failed to enable_device and/or request_selected_regions
2290 * -6 if failed to upload firmware
2291 */
2292static int
2293mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2294{
2295 int hard_reset_done = 0;
2296 int alt_ioc_ready = 0;
2297 int hard;
2298 int rc=0;
2299 int ii;
2300 int ret = 0;
2301 int reset_alt_ioc_active = 0;
2302 int irq_allocated = 0;
2303 u8 *a;
2304
2305 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2306 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2307
2308 /* Disable reply interrupts (also blocks FreeQ) */
2309 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2310 ioc->active = 0;
2311
2312 if (ioc->alt_ioc) {
2313 if (ioc->alt_ioc->active ||
2314 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2315 reset_alt_ioc_active = 1;
2316 /* Disable alt-IOC's reply interrupts
2317 * (and FreeQ) for a bit
2318 **/
2319 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2320 0xFFFFFFFF);
2321 ioc->alt_ioc->active = 0;
2322 }
2323 }
2324
2325 hard = 1;
2326 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2327 hard = 0;
2328
2329 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2330 if (hard_reset_done == -4) {
2331 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2332 ioc->name);
2333
2334 if (reset_alt_ioc_active && ioc->alt_ioc) {
2335 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2336 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2337 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2338 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2339 ioc->alt_ioc->active = 1;
2340 }
2341
2342 } else {
2343 printk(MYIOC_s_WARN_FMT
2344 "NOT READY WARNING!\n", ioc->name);
2345 }
2346 ret = -1;
2347 goto out;
2348 }
2349
2350 /* hard_reset_done = 0 if a soft reset was performed
2351 * and 1 if a hard reset was performed.
2352 */
2353 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2354 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2355 alt_ioc_ready = 1;
2356 else
2357 printk(MYIOC_s_WARN_FMT
2358 ": alt-ioc Not ready WARNING!\n",
2359 ioc->alt_ioc->name);
2360 }
2361
2362 for (ii=0; ii<5; ii++) {
2363 /* Get IOC facts! Allow 5 retries */
2364 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2365 break;
2366 }
2367
2368
2369 if (ii == 5) {
2370 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2371 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2372 ret = -2;
2373 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2374 MptDisplayIocCapabilities(ioc);
2375 }
2376
2377 if (alt_ioc_ready) {
2378 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2379 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2380 "Initial Alt IocFacts failed rc=%x\n",
2381 ioc->name, rc));
2382 /* Retry - alt IOC was initialized once
2383 */
2384 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2385 }
2386 if (rc) {
2387 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2388 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2389 alt_ioc_ready = 0;
2390 reset_alt_ioc_active = 0;
2391 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2392 MptDisplayIocCapabilities(ioc->alt_ioc);
2393 }
2394 }
2395
2396 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2397 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2398 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2399 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2400 IORESOURCE_IO);
2401 if (pci_enable_device(ioc->pcidev))
2402 return -5;
2403 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2404 "mpt"))
2405 return -5;
2406 }
2407
2408 /*
2409 * Device is reset now. It must have de-asserted the interrupt line
2410 * (if it was asserted) and it should be safe to register for the
2411 * interrupt now.
2412 */
2413 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2414 ioc->pci_irq = -1;
2415 if (ioc->pcidev->irq) {
2416 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2417 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2418 ioc->name);
2419 else
2420 ioc->msi_enable = 0;
2421 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2422 IRQF_SHARED, ioc->name, ioc);
2423 if (rc < 0) {
2424 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2425 "interrupt %d!\n",
2426 ioc->name, ioc->pcidev->irq);
2427 if (ioc->msi_enable)
2428 pci_disable_msi(ioc->pcidev);
2429 ret = -EBUSY;
2430 goto out;
2431 }
2432 irq_allocated = 1;
2433 ioc->pci_irq = ioc->pcidev->irq;
2434 pci_set_master(ioc->pcidev); /* ?? */
2435 pci_set_drvdata(ioc->pcidev, ioc);
2436 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2437 "installed at interrupt %d\n", ioc->name,
2438 ioc->pcidev->irq));
2439 }
2440 }
2441
2442 /* Prime reply & request queues!
2443 * (mucho alloc's) Must be done prior to
2444 * init as upper addresses are needed for init.
2445 * If fails, continue with alt-ioc processing
2446 */
2447 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2448 ioc->name));
2449 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2450 ret = -3;
2451
2452 /* May need to check/upload firmware & data here!
2453 * If fails, continue with alt-ioc processing
2454 */
2455 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2456 ioc->name));
2457 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2458 ret = -4;
2459// NEW!
2460 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2461 printk(MYIOC_s_WARN_FMT
2462 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2463 ioc->alt_ioc->name, rc);
2464 alt_ioc_ready = 0;
2465 reset_alt_ioc_active = 0;
2466 }
2467
2468 if (alt_ioc_ready) {
2469 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2470 alt_ioc_ready = 0;
2471 reset_alt_ioc_active = 0;
2472 printk(MYIOC_s_WARN_FMT
2473 ": alt-ioc: (%d) init failure WARNING!\n",
2474 ioc->alt_ioc->name, rc);
2475 }
2476 }
2477
2478 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2479 if (ioc->upload_fw) {
2480 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2481 "firmware upload required!\n", ioc->name));
2482
2483 /* Controller is not operational, cannot do upload
2484 */
2485 if (ret == 0) {
2486 rc = mpt_do_upload(ioc, sleepFlag);
2487 if (rc == 0) {
2488 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2489 /*
2490 * Maintain only one pointer to FW memory
2491 * so there will not be two attempt to
2492 * downloadboot onboard dual function
2493 * chips (mpt_adapter_disable,
2494 * mpt_diag_reset)
2495 */
2496 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2497 "mpt_upload: alt_%s has cached_fw=%p \n",
2498 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2499 ioc->cached_fw = NULL;
2500 }
2501 } else {
2502 printk(MYIOC_s_WARN_FMT
2503 "firmware upload failure!\n", ioc->name);
2504 ret = -6;
2505 }
2506 }
2507 }
2508 }
2509
2510 /* Enable MPT base driver management of EventNotification
2511 * and EventAck handling.
2512 */
2513 if ((ret == 0) && (!ioc->facts.EventState)) {
2514 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2515 "SendEventNotification\n",
2516 ioc->name));
2517 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2518 }
2519
2520 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2521 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2522
2523 if (ret == 0) {
2524 /* Enable! (reply interrupt) */
2525 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2526 ioc->active = 1;
2527 }
2528 if (rc == 0) { /* alt ioc */
2529 if (reset_alt_ioc_active && ioc->alt_ioc) {
2530 /* (re)Enable alt-IOC! (reply interrupt) */
2531 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2532 "reply irq re-enabled\n",
2533 ioc->alt_ioc->name));
2534 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2535 MPI_HIM_DIM);
2536 ioc->alt_ioc->active = 1;
2537 }
2538 }
2539
2540
2541 /* Add additional "reason" check before call to GetLanConfigPages
2542 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2543 * recursive scenario; GetLanConfigPages times out, timer expired
2544 * routine calls HardResetHandler, which calls into here again,
2545 * and we try GetLanConfigPages again...
2546 */
2547 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2548
2549 /*
2550 * Initialize link list for inactive raid volumes.
2551 */
2552 mutex_init(&ioc->raid_data.inactive_list_mutex);
2553 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2554
2555 switch (ioc->bus_type) {
2556
2557 case SAS:
2558 /* clear persistency table */
2559 if(ioc->facts.IOCExceptions &
2560 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2561 ret = mptbase_sas_persist_operation(ioc,
2562 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2563 if(ret != 0)
2564 goto out;
2565 }
2566
2567 /* Find IM volumes
2568 */
2569 mpt_findImVolumes(ioc);
2570
2571 /* Check, and possibly reset, the coalescing value
2572 */
2573 mpt_read_ioc_pg_1(ioc);
2574
2575 break;
2576
2577 case FC:
2578 if ((ioc->pfacts[0].ProtocolFlags &
2579 MPI_PORTFACTS_PROTOCOL_LAN) &&
2580 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2581 /*
2582 * Pre-fetch the ports LAN MAC address!
2583 * (LANPage1_t stuff)
2584 */
2585 (void) GetLanConfigPages(ioc);
2586 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2587 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2588 "LanAddr = %pMR\n", ioc->name, a));
2589 }
2590 break;
2591
2592 case SPI:
2593 /* Get NVRAM and adapter maximums from SPP 0 and 2
2594 */
2595 mpt_GetScsiPortSettings(ioc, 0);
2596
2597 /* Get version and length of SDP 1
2598 */
2599 mpt_readScsiDevicePageHeaders(ioc, 0);
2600
2601 /* Find IM volumes
2602 */
2603 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2604 mpt_findImVolumes(ioc);
2605
2606 /* Check, and possibly reset, the coalescing value
2607 */
2608 mpt_read_ioc_pg_1(ioc);
2609
2610 mpt_read_ioc_pg_4(ioc);
2611
2612 break;
2613 }
2614
2615 GetIoUnitPage2(ioc);
2616 mpt_get_manufacturing_pg_0(ioc);
2617 }
2618
2619 out:
2620 if ((ret != 0) && irq_allocated) {
2621 free_irq(ioc->pci_irq, ioc);
2622 if (ioc->msi_enable)
2623 pci_disable_msi(ioc->pcidev);
2624 }
2625 return ret;
2626}
2627
2628/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2629/**
2630 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2631 * @ioc: Pointer to MPT adapter structure
2632 * @pdev: Pointer to (struct pci_dev) structure
2633 *
2634 * Search for PCI bus/dev_function which matches
2635 * PCI bus/dev_function (+/-1) for newly discovered 929,
2636 * 929X, 1030 or 1035.
2637 *
2638 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2639 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2640 */
2641static void
2642mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2643{
2644 struct pci_dev *peer=NULL;
2645 unsigned int slot = PCI_SLOT(pdev->devfn);
2646 unsigned int func = PCI_FUNC(pdev->devfn);
2647 MPT_ADAPTER *ioc_srch;
2648
2649 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2650 " searching for devfn match on %x or %x\n",
2651 ioc->name, pci_name(pdev), pdev->bus->number,
2652 pdev->devfn, func-1, func+1));
2653
2654 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2655 if (!peer) {
2656 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2657 if (!peer)
2658 return;
2659 }
2660
2661 list_for_each_entry(ioc_srch, &ioc_list, list) {
2662 struct pci_dev *_pcidev = ioc_srch->pcidev;
2663 if (_pcidev == peer) {
2664 /* Paranoia checks */
2665 if (ioc->alt_ioc != NULL) {
2666 printk(MYIOC_s_WARN_FMT
2667 "Oops, already bound (%s <==> %s)!\n",
2668 ioc->name, ioc->name, ioc->alt_ioc->name);
2669 break;
2670 } else if (ioc_srch->alt_ioc != NULL) {
2671 printk(MYIOC_s_WARN_FMT
2672 "Oops, already bound (%s <==> %s)!\n",
2673 ioc_srch->name, ioc_srch->name,
2674 ioc_srch->alt_ioc->name);
2675 break;
2676 }
2677 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2678 "FOUND! binding %s <==> %s\n",
2679 ioc->name, ioc->name, ioc_srch->name));
2680 ioc_srch->alt_ioc = ioc;
2681 ioc->alt_ioc = ioc_srch;
2682 }
2683 }
2684 pci_dev_put(peer);
2685}
2686
2687/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2688/**
2689 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2690 * @ioc: Pointer to MPT adapter structure
2691 */
2692static void
2693mpt_adapter_disable(MPT_ADAPTER *ioc)
2694{
2695 int sz;
2696 int ret;
2697
2698 if (ioc->cached_fw != NULL) {
2699 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2700 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2701 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2702 ioc->cached_fw, CAN_SLEEP)) < 0) {
2703 printk(MYIOC_s_WARN_FMT
2704 ": firmware downloadboot failure (%d)!\n",
2705 ioc->name, ret);
2706 }
2707 }
2708
2709 /*
2710 * Put the controller into ready state (if its not already)
2711 */
2712 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2713 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2714 CAN_SLEEP)) {
2715 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2716 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2717 "reset failed to put ioc in ready state!\n",
2718 ioc->name, __func__);
2719 } else
2720 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2721 "failed!\n", ioc->name, __func__);
2722 }
2723
2724
2725 /* Disable adapter interrupts! */
2726 synchronize_irq(ioc->pcidev->irq);
2727 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2728 ioc->active = 0;
2729
2730 /* Clear any lingering interrupt */
2731 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2732 CHIPREG_READ32(&ioc->chip->IntStatus);
2733
2734 if (ioc->alloc != NULL) {
2735 sz = ioc->alloc_sz;
2736 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2737 ioc->name, ioc->alloc, ioc->alloc_sz));
2738 pci_free_consistent(ioc->pcidev, sz,
2739 ioc->alloc, ioc->alloc_dma);
2740 ioc->reply_frames = NULL;
2741 ioc->req_frames = NULL;
2742 ioc->alloc = NULL;
2743 ioc->alloc_total -= sz;
2744 }
2745
2746 if (ioc->sense_buf_pool != NULL) {
2747 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2748 pci_free_consistent(ioc->pcidev, sz,
2749 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
2750 ioc->sense_buf_pool = NULL;
2751 ioc->alloc_total -= sz;
2752 }
2753
2754 if (ioc->events != NULL){
2755 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2756 kfree(ioc->events);
2757 ioc->events = NULL;
2758 ioc->alloc_total -= sz;
2759 }
2760
2761 mpt_free_fw_memory(ioc);
2762
2763 kfree(ioc->spi_data.nvram);
2764 mpt_inactive_raid_list_free(ioc);
2765 kfree(ioc->raid_data.pIocPg2);
2766 kfree(ioc->raid_data.pIocPg3);
2767 ioc->spi_data.nvram = NULL;
2768 ioc->raid_data.pIocPg3 = NULL;
2769
2770 if (ioc->spi_data.pIocPg4 != NULL) {
2771 sz = ioc->spi_data.IocPg4Sz;
2772 pci_free_consistent(ioc->pcidev, sz,
2773 ioc->spi_data.pIocPg4,
2774 ioc->spi_data.IocPg4_dma);
2775 ioc->spi_data.pIocPg4 = NULL;
2776 ioc->alloc_total -= sz;
2777 }
2778
2779 if (ioc->ReqToChain != NULL) {
2780 kfree(ioc->ReqToChain);
2781 kfree(ioc->RequestNB);
2782 ioc->ReqToChain = NULL;
2783 }
2784
2785 kfree(ioc->ChainToChain);
2786 ioc->ChainToChain = NULL;
2787
2788 if (ioc->HostPageBuffer != NULL) {
2789 if((ret = mpt_host_page_access_control(ioc,
2790 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2791 printk(MYIOC_s_ERR_FMT
2792 ": %s: host page buffers free failed (%d)!\n",
2793 ioc->name, __func__, ret);
2794 }
2795 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2796 "HostPageBuffer free @ %p, sz=%d bytes\n",
2797 ioc->name, ioc->HostPageBuffer,
2798 ioc->HostPageBuffer_sz));
2799 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
2800 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2801 ioc->HostPageBuffer = NULL;
2802 ioc->HostPageBuffer_sz = 0;
2803 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2804 }
2805
2806 pci_set_drvdata(ioc->pcidev, NULL);
2807}
2808/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2809/**
2810 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2811 * @ioc: Pointer to MPT adapter structure
2812 *
2813 * This routine unregisters h/w resources and frees all alloc'd memory
2814 * associated with a MPT adapter structure.
2815 */
2816static void
2817mpt_adapter_dispose(MPT_ADAPTER *ioc)
2818{
2819 int sz_first, sz_last;
2820
2821 if (ioc == NULL)
2822 return;
2823
2824 sz_first = ioc->alloc_total;
2825
2826 mpt_adapter_disable(ioc);
2827
2828 if (ioc->pci_irq != -1) {
2829 free_irq(ioc->pci_irq, ioc);
2830 if (ioc->msi_enable)
2831 pci_disable_msi(ioc->pcidev);
2832 ioc->pci_irq = -1;
2833 }
2834
2835 if (ioc->memmap != NULL) {
2836 iounmap(ioc->memmap);
2837 ioc->memmap = NULL;
2838 }
2839
2840 pci_disable_device(ioc->pcidev);
2841 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2842
2843 /* Zap the adapter lookup ptr! */
2844 list_del(&ioc->list);
2845
2846 sz_last = ioc->alloc_total;
2847 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2848 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2849
2850 if (ioc->alt_ioc)
2851 ioc->alt_ioc->alt_ioc = NULL;
2852
2853 kfree(ioc);
2854}
2855
2856/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2857/**
2858 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2859 * @ioc: Pointer to MPT adapter structure
2860 */
2861static void
2862MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2863{
2864 int i = 0;
2865
2866 printk(KERN_INFO "%s: ", ioc->name);
2867 if (ioc->prod_name)
2868 pr_cont("%s: ", ioc->prod_name);
2869 pr_cont("Capabilities={");
2870
2871 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2872 pr_cont("Initiator");
2873 i++;
2874 }
2875
2876 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2877 pr_cont("%sTarget", i ? "," : "");
2878 i++;
2879 }
2880
2881 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2882 pr_cont("%sLAN", i ? "," : "");
2883 i++;
2884 }
2885
2886#if 0
2887 /*
2888 * This would probably evoke more questions than it's worth
2889 */
2890 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2891 pr_cont("%sLogBusAddr", i ? "," : "");
2892 i++;
2893 }
2894#endif
2895
2896 pr_cont("}\n");
2897}
2898
2899/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2900/**
2901 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2902 * @ioc: Pointer to MPT_ADAPTER structure
2903 * @force: Force hard KickStart of IOC
2904 * @sleepFlag: Specifies whether the process can sleep
2905 *
2906 * Returns:
2907 * 1 - DIAG reset and READY
2908 * 0 - READY initially OR soft reset and READY
2909 * -1 - Any failure on KickStart
2910 * -2 - Msg Unit Reset Failed
2911 * -3 - IO Unit Reset Failed
2912 * -4 - IOC owned by a PEER
2913 */
2914static int
2915MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2916{
2917 u32 ioc_state;
2918 int statefault = 0;
2919 int cntdn;
2920 int hard_reset_done = 0;
2921 int r;
2922 int ii;
2923 int whoinit;
2924
2925 /* Get current [raw] IOC state */
2926 ioc_state = mpt_GetIocState(ioc, 0);
2927 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2928
2929 /*
2930 * Check to see if IOC got left/stuck in doorbell handshake
2931 * grip of death. If so, hard reset the IOC.
2932 */
2933 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2934 statefault = 1;
2935 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2936 ioc->name);
2937 }
2938
2939 /* Is it already READY? */
2940 if (!statefault &&
2941 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2942 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2943 "IOC is in READY state\n", ioc->name));
2944 return 0;
2945 }
2946
2947 /*
2948 * Check to see if IOC is in FAULT state.
2949 */
2950 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2951 statefault = 2;
2952 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2953 ioc->name);
2954 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2955 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2956 }
2957
2958 /*
2959 * Hmmm... Did it get left operational?
2960 */
2961 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2962 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2963 ioc->name));
2964
2965 /* Check WhoInit.
2966 * If PCI Peer, exit.
2967 * Else, if no fault conditions are present, issue a MessageUnitReset
2968 * Else, fall through to KickStart case
2969 */
2970 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2971 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2972 "whoinit 0x%x statefault %d force %d\n",
2973 ioc->name, whoinit, statefault, force));
2974 if (whoinit == MPI_WHOINIT_PCI_PEER)
2975 return -4;
2976 else {
2977 if ((statefault == 0 ) && (force == 0)) {
2978 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2979 return 0;
2980 }
2981 statefault = 3;
2982 }
2983 }
2984
2985 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2986 if (hard_reset_done < 0)
2987 return -1;
2988
2989 /*
2990 * Loop here waiting for IOC to come READY.
2991 */
2992 ii = 0;
2993 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2994
2995 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2996 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2997 /*
2998 * BIOS or previous driver load left IOC in OP state.
2999 * Reset messaging FIFOs.
3000 */
3001 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
3002 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
3003 return -2;
3004 }
3005 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3006 /*
3007 * Something is wrong. Try to get IOC back
3008 * to a known state.
3009 */
3010 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3011 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3012 return -3;
3013 }
3014 }
3015
3016 ii++; cntdn--;
3017 if (!cntdn) {
3018 printk(MYIOC_s_ERR_FMT
3019 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3020 ioc->name, ioc_state, (int)((ii+5)/HZ));
3021 return -ETIME;
3022 }
3023
3024 if (sleepFlag == CAN_SLEEP) {
3025 msleep(1);
3026 } else {
3027 mdelay (1); /* 1 msec delay */
3028 }
3029
3030 }
3031
3032 if (statefault < 3) {
3033 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3034 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3035 }
3036
3037 return hard_reset_done;
3038}
3039
3040/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3041/**
3042 * mpt_GetIocState - Get the current state of a MPT adapter.
3043 * @ioc: Pointer to MPT_ADAPTER structure
3044 * @cooked: Request raw or cooked IOC state
3045 *
3046 * Returns all IOC Doorbell register bits if cooked==0, else just the
3047 * Doorbell bits in MPI_IOC_STATE_MASK.
3048 */
3049u32
3050mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3051{
3052 u32 s, sc;
3053
3054 /* Get! */
3055 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3056 sc = s & MPI_IOC_STATE_MASK;
3057
3058 /* Save! */
3059 ioc->last_state = sc;
3060
3061 return cooked ? sc : s;
3062}
3063
3064/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3065/**
3066 * GetIocFacts - Send IOCFacts request to MPT adapter.
3067 * @ioc: Pointer to MPT_ADAPTER structure
3068 * @sleepFlag: Specifies whether the process can sleep
3069 * @reason: If recovery, only update facts.
3070 *
3071 * Returns 0 for success, non-zero for failure.
3072 */
3073static int
3074GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3075{
3076 IOCFacts_t get_facts;
3077 IOCFactsReply_t *facts;
3078 int r;
3079 int req_sz;
3080 int reply_sz;
3081 int sz;
3082 u32 status, vv;
3083 u8 shiftFactor=1;
3084
3085 /* IOC *must* NOT be in RESET state! */
3086 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3087 printk(KERN_ERR MYNAM
3088 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3089 ioc->name, ioc->last_state);
3090 return -44;
3091 }
3092
3093 facts = &ioc->facts;
3094
3095 /* Destination (reply area)... */
3096 reply_sz = sizeof(*facts);
3097 memset(facts, 0, reply_sz);
3098
3099 /* Request area (get_facts on the stack right now!) */
3100 req_sz = sizeof(get_facts);
3101 memset(&get_facts, 0, req_sz);
3102
3103 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3104 /* Assert: All other get_facts fields are zero! */
3105
3106 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3107 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3108 ioc->name, req_sz, reply_sz));
3109
3110 /* No non-zero fields in the get_facts request are greater than
3111 * 1 byte in size, so we can just fire it off as is.
3112 */
3113 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3114 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3115 if (r != 0)
3116 return r;
3117
3118 /*
3119 * Now byte swap (GRRR) the necessary fields before any further
3120 * inspection of reply contents.
3121 *
3122 * But need to do some sanity checks on MsgLength (byte) field
3123 * to make sure we don't zero IOC's req_sz!
3124 */
3125 /* Did we get a valid reply? */
3126 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3127 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3128 /*
3129 * If not been here, done that, save off first WhoInit value
3130 */
3131 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3132 ioc->FirstWhoInit = facts->WhoInit;
3133 }
3134
3135 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3136 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3137 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3138 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3139 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3140 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3141 /* CHECKME! IOCStatus, IOCLogInfo */
3142
3143 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3144 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3145
3146 /*
3147 * FC f/w version changed between 1.1 and 1.2
3148 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3149 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3150 */
3151 if (facts->MsgVersion < MPI_VERSION_01_02) {
3152 /*
3153 * Handle old FC f/w style, convert to new...
3154 */
3155 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3156 facts->FWVersion.Word =
3157 ((oldv<<12) & 0xFF000000) |
3158 ((oldv<<8) & 0x000FFF00);
3159 } else
3160 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3161
3162 facts->ProductID = le16_to_cpu(facts->ProductID);
3163
3164 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3165 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3166 ioc->ir_firmware = 1;
3167
3168 facts->CurrentHostMfaHighAddr =
3169 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3170 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3171 facts->CurrentSenseBufferHighAddr =
3172 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3173 facts->CurReplyFrameSize =
3174 le16_to_cpu(facts->CurReplyFrameSize);
3175 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3176
3177 /*
3178 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3179 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3180 * to 14 in MPI-1.01.0x.
3181 */
3182 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3183 facts->MsgVersion > MPI_VERSION_01_00) {
3184 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3185 }
3186
3187 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3188
3189 if (!facts->RequestFrameSize) {
3190 /* Something is wrong! */
3191 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3192 ioc->name);
3193 return -55;
3194 }
3195
3196 r = sz = facts->BlockSize;
3197 vv = ((63 / (sz * 4)) + 1) & 0x03;
3198 ioc->NB_for_64_byte_frame = vv;
3199 while ( sz )
3200 {
3201 shiftFactor++;
3202 sz = sz >> 1;
3203 }
3204 ioc->NBShiftFactor = shiftFactor;
3205 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3206 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3207 ioc->name, vv, shiftFactor, r));
3208
3209 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3210 /*
3211 * Set values for this IOC's request & reply frame sizes,
3212 * and request & reply queue depths...
3213 */
3214 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3215 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3216 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3217 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3218
3219 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3220 ioc->name, ioc->reply_sz, ioc->reply_depth));
3221 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3222 ioc->name, ioc->req_sz, ioc->req_depth));
3223
3224 /* Get port facts! */
3225 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3226 return r;
3227 }
3228 } else {
3229 printk(MYIOC_s_ERR_FMT
3230 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3231 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3232 RequestFrameSize)/sizeof(u32)));
3233 return -66;
3234 }
3235
3236 return 0;
3237}
3238
3239/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3240/**
3241 * GetPortFacts - Send PortFacts request to MPT adapter.
3242 * @ioc: Pointer to MPT_ADAPTER structure
3243 * @portnum: Port number
3244 * @sleepFlag: Specifies whether the process can sleep
3245 *
3246 * Returns 0 for success, non-zero for failure.
3247 */
3248static int
3249GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3250{
3251 PortFacts_t get_pfacts;
3252 PortFactsReply_t *pfacts;
3253 int ii;
3254 int req_sz;
3255 int reply_sz;
3256 int max_id;
3257
3258 /* IOC *must* NOT be in RESET state! */
3259 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3260 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3261 ioc->name, ioc->last_state );
3262 return -4;
3263 }
3264
3265 pfacts = &ioc->pfacts[portnum];
3266
3267 /* Destination (reply area)... */
3268 reply_sz = sizeof(*pfacts);
3269 memset(pfacts, 0, reply_sz);
3270
3271 /* Request area (get_pfacts on the stack right now!) */
3272 req_sz = sizeof(get_pfacts);
3273 memset(&get_pfacts, 0, req_sz);
3274
3275 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3276 get_pfacts.PortNumber = portnum;
3277 /* Assert: All other get_pfacts fields are zero! */
3278
3279 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3280 ioc->name, portnum));
3281
3282 /* No non-zero fields in the get_pfacts request are greater than
3283 * 1 byte in size, so we can just fire it off as is.
3284 */
3285 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3286 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3287 if (ii != 0)
3288 return ii;
3289
3290 /* Did we get a valid reply? */
3291
3292 /* Now byte swap the necessary fields in the response. */
3293 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3294 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3295 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3296 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3297 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3298 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3299 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3300 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3301 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3302
3303 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3304 pfacts->MaxDevices;
3305 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3306 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3307
3308 /*
3309 * Place all the devices on channels
3310 *
3311 * (for debuging)
3312 */
3313 if (mpt_channel_mapping) {
3314 ioc->devices_per_bus = 1;
3315 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3316 }
3317
3318 return 0;
3319}
3320
3321/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3322/**
3323 * SendIocInit - Send IOCInit request to MPT adapter.
3324 * @ioc: Pointer to MPT_ADAPTER structure
3325 * @sleepFlag: Specifies whether the process can sleep
3326 *
3327 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3328 *
3329 * Returns 0 for success, non-zero for failure.
3330 */
3331static int
3332SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3333{
3334 IOCInit_t ioc_init;
3335 MPIDefaultReply_t init_reply;
3336 u32 state;
3337 int r;
3338 int count;
3339 int cntdn;
3340
3341 memset(&ioc_init, 0, sizeof(ioc_init));
3342 memset(&init_reply, 0, sizeof(init_reply));
3343
3344 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3345 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3346
3347 /* If we are in a recovery mode and we uploaded the FW image,
3348 * then this pointer is not NULL. Skip the upload a second time.
3349 * Set this flag if cached_fw set for either IOC.
3350 */
3351 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3352 ioc->upload_fw = 1;
3353 else
3354 ioc->upload_fw = 0;
3355 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3356 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3357
3358 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3359 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3360
3361 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3362 ioc->name, ioc->facts.MsgVersion));
3363 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3364 // set MsgVersion and HeaderVersion host driver was built with
3365 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3366 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3367
3368 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3369 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3370 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3371 return -99;
3372 }
3373 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3374
3375 if (ioc->sg_addr_size == sizeof(u64)) {
3376 /* Save the upper 32-bits of the request
3377 * (reply) and sense buffers.
3378 */
3379 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3380 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3381 } else {
3382 /* Force 32-bit addressing */
3383 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3384 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3385 }
3386
3387 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3388 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3389 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3390 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3391
3392 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3393 ioc->name, &ioc_init));
3394
3395 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3396 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3397 if (r != 0) {
3398 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3399 return r;
3400 }
3401
3402 /* No need to byte swap the multibyte fields in the reply
3403 * since we don't even look at its contents.
3404 */
3405
3406 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3407 ioc->name, &ioc_init));
3408
3409 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3410 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3411 return r;
3412 }
3413
3414 /* YIKES! SUPER IMPORTANT!!!
3415 * Poll IocState until _OPERATIONAL while IOC is doing
3416 * LoopInit and TargetDiscovery!
3417 */
3418 count = 0;
3419 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3420 state = mpt_GetIocState(ioc, 1);
3421 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3422 if (sleepFlag == CAN_SLEEP) {
3423 msleep(1);
3424 } else {
3425 mdelay(1);
3426 }
3427
3428 if (!cntdn) {
3429 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3430 ioc->name, (int)((count+5)/HZ));
3431 return -9;
3432 }
3433
3434 state = mpt_GetIocState(ioc, 1);
3435 count++;
3436 }
3437 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3438 ioc->name, count));
3439
3440 ioc->aen_event_read_flag=0;
3441 return r;
3442}
3443
3444/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3445/**
3446 * SendPortEnable - Send PortEnable request to MPT adapter port.
3447 * @ioc: Pointer to MPT_ADAPTER structure
3448 * @portnum: Port number to enable
3449 * @sleepFlag: Specifies whether the process can sleep
3450 *
3451 * Send PortEnable to bring IOC to OPERATIONAL state.
3452 *
3453 * Returns 0 for success, non-zero for failure.
3454 */
3455static int
3456SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3457{
3458 PortEnable_t port_enable;
3459 MPIDefaultReply_t reply_buf;
3460 int rc;
3461 int req_sz;
3462 int reply_sz;
3463
3464 /* Destination... */
3465 reply_sz = sizeof(MPIDefaultReply_t);
3466 memset(&reply_buf, 0, reply_sz);
3467
3468 req_sz = sizeof(PortEnable_t);
3469 memset(&port_enable, 0, req_sz);
3470
3471 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3472 port_enable.PortNumber = portnum;
3473/* port_enable.ChainOffset = 0; */
3474/* port_enable.MsgFlags = 0; */
3475/* port_enable.MsgContext = 0; */
3476
3477 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3478 ioc->name, portnum, &port_enable));
3479
3480 /* RAID FW may take a long time to enable
3481 */
3482 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3483 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3484 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3485 300 /*seconds*/, sleepFlag);
3486 } else {
3487 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3488 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3489 30 /*seconds*/, sleepFlag);
3490 }
3491 return rc;
3492}
3493
3494/**
3495 * mpt_alloc_fw_memory - allocate firmware memory
3496 * @ioc: Pointer to MPT_ADAPTER structure
3497 * @size: total FW bytes
3498 *
3499 * If memory has already been allocated, the same (cached) value
3500 * is returned.
3501 *
3502 * Return 0 if successful, or non-zero for failure
3503 **/
3504int
3505mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3506{
3507 int rc;
3508
3509 if (ioc->cached_fw) {
3510 rc = 0; /* use already allocated memory */
3511 goto out;
3512 }
3513 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3514 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3515 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3516 rc = 0;
3517 goto out;
3518 }
3519 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3520 if (!ioc->cached_fw) {
3521 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3522 ioc->name);
3523 rc = -1;
3524 } else {
3525 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3526 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3527 ioc->alloc_total += size;
3528 rc = 0;
3529 }
3530 out:
3531 return rc;
3532}
3533
3534/**
3535 * mpt_free_fw_memory - free firmware memory
3536 * @ioc: Pointer to MPT_ADAPTER structure
3537 *
3538 * If alt_img is NULL, delete from ioc structure.
3539 * Else, delete a secondary image in same format.
3540 **/
3541void
3542mpt_free_fw_memory(MPT_ADAPTER *ioc)
3543{
3544 int sz;
3545
3546 if (!ioc->cached_fw)
3547 return;
3548
3549 sz = ioc->facts.FWImageSize;
3550 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3551 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3552 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3553 ioc->alloc_total -= sz;
3554 ioc->cached_fw = NULL;
3555}
3556
3557/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3558/**
3559 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3560 * @ioc: Pointer to MPT_ADAPTER structure
3561 * @sleepFlag: Specifies whether the process can sleep
3562 *
3563 * Returns 0 for success, >0 for handshake failure
3564 * <0 for fw upload failure.
3565 *
3566 * Remark: If bound IOC and a successful FWUpload was performed
3567 * on the bound IOC, the second image is discarded
3568 * and memory is free'd. Both channels must upload to prevent
3569 * IOC from running in degraded mode.
3570 */
3571static int
3572mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3573{
3574 u8 reply[sizeof(FWUploadReply_t)];
3575 FWUpload_t *prequest;
3576 FWUploadReply_t *preply;
3577 FWUploadTCSGE_t *ptcsge;
3578 u32 flagsLength;
3579 int ii, sz, reply_sz;
3580 int cmdStatus;
3581 int request_size;
3582 /* If the image size is 0, we are done.
3583 */
3584 if ((sz = ioc->facts.FWImageSize) == 0)
3585 return 0;
3586
3587 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3588 return -ENOMEM;
3589
3590 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3591 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3592
3593 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3594 kzalloc(ioc->req_sz, GFP_KERNEL);
3595 if (!prequest) {
3596 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3597 "while allocating memory \n", ioc->name));
3598 mpt_free_fw_memory(ioc);
3599 return -ENOMEM;
3600 }
3601
3602 preply = (FWUploadReply_t *)&reply;
3603
3604 reply_sz = sizeof(reply);
3605 memset(preply, 0, reply_sz);
3606
3607 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3608 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3609
3610 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3611 ptcsge->DetailsLength = 12;
3612 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3613 ptcsge->ImageSize = cpu_to_le32(sz);
3614 ptcsge++;
3615
3616 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3617 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3618 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3619 ioc->SGE_size;
3620 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3621 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3622 ioc->facts.FWImageSize, request_size));
3623 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3624
3625 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3626 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3627
3628 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3629 "rc=%x \n", ioc->name, ii));
3630
3631 cmdStatus = -EFAULT;
3632 if (ii == 0) {
3633 /* Handshake transfer was complete and successful.
3634 * Check the Reply Frame.
3635 */
3636 int status;
3637 status = le16_to_cpu(preply->IOCStatus) &
3638 MPI_IOCSTATUS_MASK;
3639 if (status == MPI_IOCSTATUS_SUCCESS &&
3640 ioc->facts.FWImageSize ==
3641 le32_to_cpu(preply->ActualImageSize))
3642 cmdStatus = 0;
3643 }
3644 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3645 ioc->name, cmdStatus));
3646
3647
3648 if (cmdStatus) {
3649 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3650 "freeing image \n", ioc->name));
3651 mpt_free_fw_memory(ioc);
3652 }
3653 kfree(prequest);
3654
3655 return cmdStatus;
3656}
3657
3658/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3659/**
3660 * mpt_downloadboot - DownloadBoot code
3661 * @ioc: Pointer to MPT_ADAPTER structure
3662 * @pFwHeader: Pointer to firmware header info
3663 * @sleepFlag: Specifies whether the process can sleep
3664 *
3665 * FwDownloadBoot requires Programmed IO access.
3666 *
3667 * Returns 0 for success
3668 * -1 FW Image size is 0
3669 * -2 No valid cached_fw Pointer
3670 * <0 for fw upload failure.
3671 */
3672static int
3673mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3674{
3675 MpiExtImageHeader_t *pExtImage;
3676 u32 fwSize;
3677 u32 diag0val;
3678 int count;
3679 u32 *ptrFw;
3680 u32 diagRwData;
3681 u32 nextImage;
3682 u32 load_addr;
3683 u32 ioc_state=0;
3684
3685 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3686 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3687
3688 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3689 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3690 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3691 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3692 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3693 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3694
3695 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3696
3697 /* wait 1 msec */
3698 if (sleepFlag == CAN_SLEEP) {
3699 msleep(1);
3700 } else {
3701 mdelay (1);
3702 }
3703
3704 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3705 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3706
3707 for (count = 0; count < 30; count ++) {
3708 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3709 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3710 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3711 ioc->name, count));
3712 break;
3713 }
3714 /* wait .1 sec */
3715 if (sleepFlag == CAN_SLEEP) {
3716 msleep (100);
3717 } else {
3718 mdelay (100);
3719 }
3720 }
3721
3722 if ( count == 30 ) {
3723 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3724 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3725 ioc->name, diag0val));
3726 return -3;
3727 }
3728
3729 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3730 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3731 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3732 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3733 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3734 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3735
3736 /* Set the DiagRwEn and Disable ARM bits */
3737 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3738
3739 fwSize = (pFwHeader->ImageSize + 3)/4;
3740 ptrFw = (u32 *) pFwHeader;
3741
3742 /* Write the LoadStartAddress to the DiagRw Address Register
3743 * using Programmed IO
3744 */
3745 if (ioc->errata_flag_1064)
3746 pci_enable_io_access(ioc->pcidev);
3747
3748 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3749 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3750 ioc->name, pFwHeader->LoadStartAddress));
3751
3752 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3753 ioc->name, fwSize*4, ptrFw));
3754 while (fwSize--) {
3755 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3756 }
3757
3758 nextImage = pFwHeader->NextImageHeaderOffset;
3759 while (nextImage) {
3760 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3761
3762 load_addr = pExtImage->LoadStartAddress;
3763
3764 fwSize = (pExtImage->ImageSize + 3) >> 2;
3765 ptrFw = (u32 *)pExtImage;
3766
3767 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3768 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3769 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3770
3771 while (fwSize--) {
3772 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3773 }
3774 nextImage = pExtImage->NextImageHeaderOffset;
3775 }
3776
3777 /* Write the IopResetVectorRegAddr */
3778 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3779 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3780
3781 /* Write the IopResetVectorValue */
3782 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3783 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3784
3785 /* Clear the internal flash bad bit - autoincrementing register,
3786 * so must do two writes.
3787 */
3788 if (ioc->bus_type == SPI) {
3789 /*
3790 * 1030 and 1035 H/W errata, workaround to access
3791 * the ClearFlashBadSignatureBit
3792 */
3793 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3794 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3795 diagRwData |= 0x40000000;
3796 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3797 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3798
3799 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3800 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3801 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3802 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3803
3804 /* wait 1 msec */
3805 if (sleepFlag == CAN_SLEEP) {
3806 msleep (1);
3807 } else {
3808 mdelay (1);
3809 }
3810 }
3811
3812 if (ioc->errata_flag_1064)
3813 pci_disable_io_access(ioc->pcidev);
3814
3815 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3816 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3817 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3818 ioc->name, diag0val));
3819 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3820 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3821 ioc->name, diag0val));
3822 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3823
3824 /* Write 0xFF to reset the sequencer */
3825 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3826
3827 if (ioc->bus_type == SAS) {
3828 ioc_state = mpt_GetIocState(ioc, 0);
3829 if ( (GetIocFacts(ioc, sleepFlag,
3830 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3831 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3832 ioc->name, ioc_state));
3833 return -EFAULT;
3834 }
3835 }
3836
3837 for (count=0; count<HZ*20; count++) {
3838 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3839 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3840 "downloadboot successful! (count=%d) IocState=%x\n",
3841 ioc->name, count, ioc_state));
3842 if (ioc->bus_type == SAS) {
3843 return 0;
3844 }
3845 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3846 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3847 "downloadboot: SendIocInit failed\n",
3848 ioc->name));
3849 return -EFAULT;
3850 }
3851 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3852 "downloadboot: SendIocInit successful\n",
3853 ioc->name));
3854 return 0;
3855 }
3856 if (sleepFlag == CAN_SLEEP) {
3857 msleep (10);
3858 } else {
3859 mdelay (10);
3860 }
3861 }
3862 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3863 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3864 return -EFAULT;
3865}
3866
3867/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3868/**
3869 * KickStart - Perform hard reset of MPT adapter.
3870 * @ioc: Pointer to MPT_ADAPTER structure
3871 * @force: Force hard reset
3872 * @sleepFlag: Specifies whether the process can sleep
3873 *
3874 * This routine places MPT adapter in diagnostic mode via the
3875 * WriteSequence register, and then performs a hard reset of adapter
3876 * via the Diagnostic register.
3877 *
3878 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3879 * or NO_SLEEP (interrupt thread, use mdelay)
3880 * force - 1 if doorbell active, board fault state
3881 * board operational, IOC_RECOVERY or
3882 * IOC_BRINGUP and there is an alt_ioc.
3883 * 0 else
3884 *
3885 * Returns:
3886 * 1 - hard reset, READY
3887 * 0 - no reset due to History bit, READY
3888 * -1 - no reset due to History bit but not READY
3889 * OR reset but failed to come READY
3890 * -2 - no reset, could not enter DIAG mode
3891 * -3 - reset but bad FW bit
3892 */
3893static int
3894KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3895{
3896 int hard_reset_done = 0;
3897 u32 ioc_state=0;
3898 int cnt,cntdn;
3899
3900 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3901 if (ioc->bus_type == SPI) {
3902 /* Always issue a Msg Unit Reset first. This will clear some
3903 * SCSI bus hang conditions.
3904 */
3905 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3906
3907 if (sleepFlag == CAN_SLEEP) {
3908 msleep (1000);
3909 } else {
3910 mdelay (1000);
3911 }
3912 }
3913
3914 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3915 if (hard_reset_done < 0)
3916 return hard_reset_done;
3917
3918 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3919 ioc->name));
3920
3921 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3922 for (cnt=0; cnt<cntdn; cnt++) {
3923 ioc_state = mpt_GetIocState(ioc, 1);
3924 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3925 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3926 ioc->name, cnt));
3927 return hard_reset_done;
3928 }
3929 if (sleepFlag == CAN_SLEEP) {
3930 msleep (10);
3931 } else {
3932 mdelay (10);
3933 }
3934 }
3935
3936 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3937 ioc->name, mpt_GetIocState(ioc, 0)));
3938 return -1;
3939}
3940
3941/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3942/**
3943 * mpt_diag_reset - Perform hard reset of the adapter.
3944 * @ioc: Pointer to MPT_ADAPTER structure
3945 * @ignore: Set if to honor and clear to ignore
3946 * the reset history bit
3947 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3948 * else set to NO_SLEEP (use mdelay instead)
3949 *
3950 * This routine places the adapter in diagnostic mode via the
3951 * WriteSequence register and then performs a hard reset of adapter
3952 * via the Diagnostic register. Adapter should be in ready state
3953 * upon successful completion.
3954 *
3955 * Returns: 1 hard reset successful
3956 * 0 no reset performed because reset history bit set
3957 * -2 enabling diagnostic mode failed
3958 * -3 diagnostic reset failed
3959 */
3960static int
3961mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3962{
3963 u32 diag0val;
3964 u32 doorbell;
3965 int hard_reset_done = 0;
3966 int count = 0;
3967 u32 diag1val = 0;
3968 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3969 u8 cb_idx;
3970
3971 /* Clear any existing interrupts */
3972 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3973
3974 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3975
3976 if (!ignore)
3977 return 0;
3978
3979 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3980 "address=%p\n", ioc->name, __func__,
3981 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3982 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3983 if (sleepFlag == CAN_SLEEP)
3984 msleep(1);
3985 else
3986 mdelay(1);
3987
3988 /*
3989 * Call each currently registered protocol IOC reset handler
3990 * with pre-reset indication.
3991 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3992 * MptResetHandlers[] registered yet.
3993 */
3994 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3995 if (MptResetHandlers[cb_idx])
3996 (*(MptResetHandlers[cb_idx]))(ioc,
3997 MPT_IOC_PRE_RESET);
3998 }
3999
4000 for (count = 0; count < 60; count ++) {
4001 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4002 doorbell &= MPI_IOC_STATE_MASK;
4003
4004 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4005 "looking for READY STATE: doorbell=%x"
4006 " count=%d\n",
4007 ioc->name, doorbell, count));
4008
4009 if (doorbell == MPI_IOC_STATE_READY) {
4010 return 1;
4011 }
4012
4013 /* wait 1 sec */
4014 if (sleepFlag == CAN_SLEEP)
4015 msleep(1000);
4016 else
4017 mdelay(1000);
4018 }
4019 return -1;
4020 }
4021
4022 /* Use "Diagnostic reset" method! (only thing available!) */
4023 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4024
4025 if (ioc->debug_level & MPT_DEBUG) {
4026 if (ioc->alt_ioc)
4027 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4028 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4029 ioc->name, diag0val, diag1val));
4030 }
4031
4032 /* Do the reset if we are told to ignore the reset history
4033 * or if the reset history is 0
4034 */
4035 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4036 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4037 /* Write magic sequence to WriteSequence register
4038 * Loop until in diagnostic mode
4039 */
4040 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4041 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4042 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4043 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4044 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4045 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4046
4047 /* wait 100 msec */
4048 if (sleepFlag == CAN_SLEEP) {
4049 msleep (100);
4050 } else {
4051 mdelay (100);
4052 }
4053
4054 count++;
4055 if (count > 20) {
4056 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4057 ioc->name, diag0val);
4058 return -2;
4059
4060 }
4061
4062 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4063
4064 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4065 ioc->name, diag0val));
4066 }
4067
4068 if (ioc->debug_level & MPT_DEBUG) {
4069 if (ioc->alt_ioc)
4070 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4071 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4072 ioc->name, diag0val, diag1val));
4073 }
4074 /*
4075 * Disable the ARM (Bug fix)
4076 *
4077 */
4078 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4079 mdelay(1);
4080
4081 /*
4082 * Now hit the reset bit in the Diagnostic register
4083 * (THE BIG HAMMER!) (Clears DRWE bit).
4084 */
4085 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4086 hard_reset_done = 1;
4087 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4088 ioc->name));
4089
4090 /*
4091 * Call each currently registered protocol IOC reset handler
4092 * with pre-reset indication.
4093 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4094 * MptResetHandlers[] registered yet.
4095 */
4096 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4097 if (MptResetHandlers[cb_idx]) {
4098 mpt_signal_reset(cb_idx,
4099 ioc, MPT_IOC_PRE_RESET);
4100 if (ioc->alt_ioc) {
4101 mpt_signal_reset(cb_idx,
4102 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4103 }
4104 }
4105 }
4106
4107 if (ioc->cached_fw)
4108 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4109 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4110 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4111 else
4112 cached_fw = NULL;
4113 if (cached_fw) {
4114 /* If the DownloadBoot operation fails, the
4115 * IOC will be left unusable. This is a fatal error
4116 * case. _diag_reset will return < 0
4117 */
4118 for (count = 0; count < 30; count ++) {
4119 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4120 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4121 break;
4122 }
4123
4124 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4125 ioc->name, diag0val, count));
4126 /* wait 1 sec */
4127 if (sleepFlag == CAN_SLEEP) {
4128 msleep (1000);
4129 } else {
4130 mdelay (1000);
4131 }
4132 }
4133 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4134 printk(MYIOC_s_WARN_FMT
4135 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4136 }
4137
4138 } else {
4139 /* Wait for FW to reload and for board
4140 * to go to the READY state.
4141 * Maximum wait is 60 seconds.
4142 * If fail, no error will check again
4143 * with calling program.
4144 */
4145 for (count = 0; count < 60; count ++) {
4146 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4147 doorbell &= MPI_IOC_STATE_MASK;
4148
4149 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4150 "looking for READY STATE: doorbell=%x"
4151 " count=%d\n", ioc->name, doorbell, count));
4152
4153 if (doorbell == MPI_IOC_STATE_READY) {
4154 break;
4155 }
4156
4157 /* wait 1 sec */
4158 if (sleepFlag == CAN_SLEEP) {
4159 msleep (1000);
4160 } else {
4161 mdelay (1000);
4162 }
4163 }
4164
4165 if (doorbell != MPI_IOC_STATE_READY)
4166 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4167 "after reset! IocState=%x", ioc->name,
4168 doorbell);
4169 }
4170 }
4171
4172 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4173 if (ioc->debug_level & MPT_DEBUG) {
4174 if (ioc->alt_ioc)
4175 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4176 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4177 ioc->name, diag0val, diag1val));
4178 }
4179
4180 /* Clear RESET_HISTORY bit! Place board in the
4181 * diagnostic mode to update the diag register.
4182 */
4183 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4184 count = 0;
4185 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4186 /* Write magic sequence to WriteSequence register
4187 * Loop until in diagnostic mode
4188 */
4189 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4190 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4191 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4192 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4193 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4194 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4195
4196 /* wait 100 msec */
4197 if (sleepFlag == CAN_SLEEP) {
4198 msleep (100);
4199 } else {
4200 mdelay (100);
4201 }
4202
4203 count++;
4204 if (count > 20) {
4205 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4206 ioc->name, diag0val);
4207 break;
4208 }
4209 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4210 }
4211 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4212 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4213 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4214 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4215 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4216 ioc->name);
4217 }
4218
4219 /* Disable Diagnostic Mode
4220 */
4221 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4222
4223 /* Check FW reload status flags.
4224 */
4225 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4226 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4227 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4228 ioc->name, diag0val);
4229 return -3;
4230 }
4231
4232 if (ioc->debug_level & MPT_DEBUG) {
4233 if (ioc->alt_ioc)
4234 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4235 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4236 ioc->name, diag0val, diag1val));
4237 }
4238
4239 /*
4240 * Reset flag that says we've enabled event notification
4241 */
4242 ioc->facts.EventState = 0;
4243
4244 if (ioc->alt_ioc)
4245 ioc->alt_ioc->facts.EventState = 0;
4246
4247 return hard_reset_done;
4248}
4249
4250/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4251/**
4252 * SendIocReset - Send IOCReset request to MPT adapter.
4253 * @ioc: Pointer to MPT_ADAPTER structure
4254 * @reset_type: reset type, expected values are
4255 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4256 * @sleepFlag: Specifies whether the process can sleep
4257 *
4258 * Send IOCReset request to the MPT adapter.
4259 *
4260 * Returns 0 for success, non-zero for failure.
4261 */
4262static int
4263SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4264{
4265 int r;
4266 u32 state;
4267 int cntdn, count;
4268
4269 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4270 ioc->name, reset_type));
4271 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4272 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4273 return r;
4274
4275 /* FW ACK'd request, wait for READY state
4276 */
4277 count = 0;
4278 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4279
4280 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4281 cntdn--;
4282 count++;
4283 if (!cntdn) {
4284 if (sleepFlag != CAN_SLEEP)
4285 count *= 10;
4286
4287 printk(MYIOC_s_ERR_FMT
4288 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4289 ioc->name, state, (int)((count+5)/HZ));
4290 return -ETIME;
4291 }
4292
4293 if (sleepFlag == CAN_SLEEP) {
4294 msleep(1);
4295 } else {
4296 mdelay (1); /* 1 msec delay */
4297 }
4298 }
4299
4300 /* TODO!
4301 * Cleanup all event stuff for this IOC; re-issue EventNotification
4302 * request if needed.
4303 */
4304 if (ioc->facts.Function)
4305 ioc->facts.EventState = 0;
4306
4307 return 0;
4308}
4309
4310/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4311/**
4312 * initChainBuffers - Allocate memory for and initialize chain buffers
4313 * @ioc: Pointer to MPT_ADAPTER structure
4314 *
4315 * Allocates memory for and initializes chain buffers,
4316 * chain buffer control arrays and spinlock.
4317 */
4318static int
4319initChainBuffers(MPT_ADAPTER *ioc)
4320{
4321 u8 *mem;
4322 int sz, ii, num_chain;
4323 int scale, num_sge, numSGE;
4324
4325 /* ReqToChain size must equal the req_depth
4326 * index = req_idx
4327 */
4328 if (ioc->ReqToChain == NULL) {
4329 sz = ioc->req_depth * sizeof(int);
4330 mem = kmalloc(sz, GFP_ATOMIC);
4331 if (mem == NULL)
4332 return -1;
4333
4334 ioc->ReqToChain = (int *) mem;
4335 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4336 ioc->name, mem, sz));
4337 mem = kmalloc(sz, GFP_ATOMIC);
4338 if (mem == NULL)
4339 return -1;
4340
4341 ioc->RequestNB = (int *) mem;
4342 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4343 ioc->name, mem, sz));
4344 }
4345 for (ii = 0; ii < ioc->req_depth; ii++) {
4346 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4347 }
4348
4349 /* ChainToChain size must equal the total number
4350 * of chain buffers to be allocated.
4351 * index = chain_idx
4352 *
4353 * Calculate the number of chain buffers needed(plus 1) per I/O
4354 * then multiply the maximum number of simultaneous cmds
4355 *
4356 * num_sge = num sge in request frame + last chain buffer
4357 * scale = num sge per chain buffer if no chain element
4358 */
4359 scale = ioc->req_sz / ioc->SGE_size;
4360 if (ioc->sg_addr_size == sizeof(u64))
4361 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4362 else
4363 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4364
4365 if (ioc->sg_addr_size == sizeof(u64)) {
4366 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4367 (ioc->req_sz - 60) / ioc->SGE_size;
4368 } else {
4369 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4370 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4371 }
4372 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4373 ioc->name, num_sge, numSGE));
4374
4375 if (ioc->bus_type == FC) {
4376 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4377 numSGE = MPT_SCSI_FC_SG_DEPTH;
4378 } else {
4379 if (numSGE > MPT_SCSI_SG_DEPTH)
4380 numSGE = MPT_SCSI_SG_DEPTH;
4381 }
4382
4383 num_chain = 1;
4384 while (numSGE - num_sge > 0) {
4385 num_chain++;
4386 num_sge += (scale - 1);
4387 }
4388 num_chain++;
4389
4390 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4391 ioc->name, numSGE, num_sge, num_chain));
4392
4393 if (ioc->bus_type == SPI)
4394 num_chain *= MPT_SCSI_CAN_QUEUE;
4395 else if (ioc->bus_type == SAS)
4396 num_chain *= MPT_SAS_CAN_QUEUE;
4397 else
4398 num_chain *= MPT_FC_CAN_QUEUE;
4399
4400 ioc->num_chain = num_chain;
4401
4402 sz = num_chain * sizeof(int);
4403 if (ioc->ChainToChain == NULL) {
4404 mem = kmalloc(sz, GFP_ATOMIC);
4405 if (mem == NULL)
4406 return -1;
4407
4408 ioc->ChainToChain = (int *) mem;
4409 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4410 ioc->name, mem, sz));
4411 } else {
4412 mem = (u8 *) ioc->ChainToChain;
4413 }
4414 memset(mem, 0xFF, sz);
4415 return num_chain;
4416}
4417
4418/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4419/**
4420 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4421 * @ioc: Pointer to MPT_ADAPTER structure
4422 *
4423 * This routine allocates memory for the MPT reply and request frame
4424 * pools (if necessary), and primes the IOC reply FIFO with
4425 * reply frames.
4426 *
4427 * Returns 0 for success, non-zero for failure.
4428 */
4429static int
4430PrimeIocFifos(MPT_ADAPTER *ioc)
4431{
4432 MPT_FRAME_HDR *mf;
4433 unsigned long flags;
4434 dma_addr_t alloc_dma;
4435 u8 *mem;
4436 int i, reply_sz, sz, total_size, num_chain;
4437 u64 dma_mask;
4438
4439 dma_mask = 0;
4440
4441 /* Prime reply FIFO... */
4442
4443 if (ioc->reply_frames == NULL) {
4444 if ( (num_chain = initChainBuffers(ioc)) < 0)
4445 return -1;
4446 /*
4447 * 1078 errata workaround for the 36GB limitation
4448 */
4449 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4450 ioc->dma_mask > DMA_BIT_MASK(35)) {
4451 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4452 && !pci_set_consistent_dma_mask(ioc->pcidev,
4453 DMA_BIT_MASK(32))) {
4454 dma_mask = DMA_BIT_MASK(35);
4455 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4456 "setting 35 bit addressing for "
4457 "Request/Reply/Chain and Sense Buffers\n",
4458 ioc->name));
4459 } else {
4460 /*Reseting DMA mask to 64 bit*/
4461 pci_set_dma_mask(ioc->pcidev,
4462 DMA_BIT_MASK(64));
4463 pci_set_consistent_dma_mask(ioc->pcidev,
4464 DMA_BIT_MASK(64));
4465
4466 printk(MYIOC_s_ERR_FMT
4467 "failed setting 35 bit addressing for "
4468 "Request/Reply/Chain and Sense Buffers\n",
4469 ioc->name);
4470 return -1;
4471 }
4472 }
4473
4474 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4475 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4476 ioc->name, ioc->reply_sz, ioc->reply_depth));
4477 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4478 ioc->name, reply_sz, reply_sz));
4479
4480 sz = (ioc->req_sz * ioc->req_depth);
4481 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4482 ioc->name, ioc->req_sz, ioc->req_depth));
4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4484 ioc->name, sz, sz));
4485 total_size += sz;
4486
4487 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4488 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4489 ioc->name, ioc->req_sz, num_chain));
4490 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4491 ioc->name, sz, sz, num_chain));
4492
4493 total_size += sz;
4494 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
4495 if (mem == NULL) {
4496 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4497 ioc->name);
4498 goto out_fail;
4499 }
4500
4501 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4502 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4503
4504 memset(mem, 0, total_size);
4505 ioc->alloc_total += total_size;
4506 ioc->alloc = mem;
4507 ioc->alloc_dma = alloc_dma;
4508 ioc->alloc_sz = total_size;
4509 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4510 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4511
4512 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4513 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4514
4515 alloc_dma += reply_sz;
4516 mem += reply_sz;
4517
4518 /* Request FIFO - WE manage this! */
4519
4520 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4521 ioc->req_frames_dma = alloc_dma;
4522
4523 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4524 ioc->name, mem, (void *)(ulong)alloc_dma));
4525
4526 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4527
4528 for (i = 0; i < ioc->req_depth; i++) {
4529 alloc_dma += ioc->req_sz;
4530 mem += ioc->req_sz;
4531 }
4532
4533 ioc->ChainBuffer = mem;
4534 ioc->ChainBufferDMA = alloc_dma;
4535
4536 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4537 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4538
4539 /* Initialize the free chain Q.
4540 */
4541
4542 INIT_LIST_HEAD(&ioc->FreeChainQ);
4543
4544 /* Post the chain buffers to the FreeChainQ.
4545 */
4546 mem = (u8 *)ioc->ChainBuffer;
4547 for (i=0; i < num_chain; i++) {
4548 mf = (MPT_FRAME_HDR *) mem;
4549 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4550 mem += ioc->req_sz;
4551 }
4552
4553 /* Initialize Request frames linked list
4554 */
4555 alloc_dma = ioc->req_frames_dma;
4556 mem = (u8 *) ioc->req_frames;
4557
4558 spin_lock_irqsave(&ioc->FreeQlock, flags);
4559 INIT_LIST_HEAD(&ioc->FreeQ);
4560 for (i = 0; i < ioc->req_depth; i++) {
4561 mf = (MPT_FRAME_HDR *) mem;
4562
4563 /* Queue REQUESTs *internally*! */
4564 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4565
4566 mem += ioc->req_sz;
4567 }
4568 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4569
4570 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4571 ioc->sense_buf_pool =
4572 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
4573 if (ioc->sense_buf_pool == NULL) {
4574 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4575 ioc->name);
4576 goto out_fail;
4577 }
4578
4579 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4580 ioc->alloc_total += sz;
4581 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4582 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4583
4584 }
4585
4586 /* Post Reply frames to FIFO
4587 */
4588 alloc_dma = ioc->alloc_dma;
4589 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4590 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4591
4592 for (i = 0; i < ioc->reply_depth; i++) {
4593 /* Write each address to the IOC! */
4594 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4595 alloc_dma += ioc->reply_sz;
4596 }
4597
4598 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4599 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4600 ioc->dma_mask))
4601 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4602 "restoring 64 bit addressing\n", ioc->name));
4603
4604 return 0;
4605
4606out_fail:
4607
4608 if (ioc->alloc != NULL) {
4609 sz = ioc->alloc_sz;
4610 pci_free_consistent(ioc->pcidev,
4611 sz,
4612 ioc->alloc, ioc->alloc_dma);
4613 ioc->reply_frames = NULL;
4614 ioc->req_frames = NULL;
4615 ioc->alloc_total -= sz;
4616 }
4617 if (ioc->sense_buf_pool != NULL) {
4618 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4619 pci_free_consistent(ioc->pcidev,
4620 sz,
4621 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
4622 ioc->sense_buf_pool = NULL;
4623 }
4624
4625 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4626 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4627 DMA_BIT_MASK(64)))
4628 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4629 "restoring 64 bit addressing\n", ioc->name));
4630
4631 return -1;
4632}
4633
4634/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4635/**
4636 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4637 * from IOC via doorbell handshake method.
4638 * @ioc: Pointer to MPT_ADAPTER structure
4639 * @reqBytes: Size of the request in bytes
4640 * @req: Pointer to MPT request frame
4641 * @replyBytes: Expected size of the reply in bytes
4642 * @u16reply: Pointer to area where reply should be written
4643 * @maxwait: Max wait time for a reply (in seconds)
4644 * @sleepFlag: Specifies whether the process can sleep
4645 *
4646 * NOTES: It is the callers responsibility to byte-swap fields in the
4647 * request which are greater than 1 byte in size. It is also the
4648 * callers responsibility to byte-swap response fields which are
4649 * greater than 1 byte in size.
4650 *
4651 * Returns 0 for success, non-zero for failure.
4652 */
4653static int
4654mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4655 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4656{
4657 MPIDefaultReply_t *mptReply;
4658 int failcnt = 0;
4659 int t;
4660
4661 /*
4662 * Get ready to cache a handshake reply
4663 */
4664 ioc->hs_reply_idx = 0;
4665 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4666 mptReply->MsgLength = 0;
4667
4668 /*
4669 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4670 * then tell IOC that we want to handshake a request of N words.
4671 * (WRITE u32val to Doorbell reg).
4672 */
4673 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4674 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4675 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4676 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4677
4678 /*
4679 * Wait for IOC's doorbell handshake int
4680 */
4681 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4682 failcnt++;
4683
4684 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4685 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4686
4687 /* Read doorbell and check for active bit */
4688 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4689 return -1;
4690
4691 /*
4692 * Clear doorbell int (WRITE 0 to IntStatus reg),
4693 * then wait for IOC to ACKnowledge that it's ready for
4694 * our handshake request.
4695 */
4696 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4697 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4698 failcnt++;
4699
4700 if (!failcnt) {
4701 int ii;
4702 u8 *req_as_bytes = (u8 *) req;
4703
4704 /*
4705 * Stuff request words via doorbell handshake,
4706 * with ACK from IOC for each.
4707 */
4708 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4709 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4710 (req_as_bytes[(ii*4) + 1] << 8) |
4711 (req_as_bytes[(ii*4) + 2] << 16) |
4712 (req_as_bytes[(ii*4) + 3] << 24));
4713
4714 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4715 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4716 failcnt++;
4717 }
4718
4719 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4720 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4721
4722 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4723 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4724
4725 /*
4726 * Wait for completion of doorbell handshake reply from the IOC
4727 */
4728 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4729 failcnt++;
4730
4731 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4732 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4733
4734 /*
4735 * Copy out the cached reply...
4736 */
4737 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4738 u16reply[ii] = ioc->hs_reply[ii];
4739 } else {
4740 return -99;
4741 }
4742
4743 return -failcnt;
4744}
4745
4746/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4747/**
4748 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4749 * @ioc: Pointer to MPT_ADAPTER structure
4750 * @howlong: How long to wait (in seconds)
4751 * @sleepFlag: Specifies whether the process can sleep
4752 *
4753 * This routine waits (up to ~2 seconds max) for IOC doorbell
4754 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4755 * bit in its IntStatus register being clear.
4756 *
4757 * Returns a negative value on failure, else wait loop count.
4758 */
4759static int
4760WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4761{
4762 int cntdn;
4763 int count = 0;
4764 u32 intstat=0;
4765
4766 cntdn = 1000 * howlong;
4767
4768 if (sleepFlag == CAN_SLEEP) {
4769 while (--cntdn) {
4770 msleep (1);
4771 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4772 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4773 break;
4774 count++;
4775 }
4776 } else {
4777 while (--cntdn) {
4778 udelay (1000);
4779 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4780 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4781 break;
4782 count++;
4783 }
4784 }
4785
4786 if (cntdn) {
4787 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4788 ioc->name, count));
4789 return count;
4790 }
4791
4792 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4793 ioc->name, count, intstat);
4794 return -1;
4795}
4796
4797/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4798/**
4799 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4800 * @ioc: Pointer to MPT_ADAPTER structure
4801 * @howlong: How long to wait (in seconds)
4802 * @sleepFlag: Specifies whether the process can sleep
4803 *
4804 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4805 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4806 *
4807 * Returns a negative value on failure, else wait loop count.
4808 */
4809static int
4810WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4811{
4812 int cntdn;
4813 int count = 0;
4814 u32 intstat=0;
4815
4816 cntdn = 1000 * howlong;
4817 if (sleepFlag == CAN_SLEEP) {
4818 while (--cntdn) {
4819 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4820 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4821 break;
4822 msleep(1);
4823 count++;
4824 }
4825 } else {
4826 while (--cntdn) {
4827 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4828 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4829 break;
4830 udelay (1000);
4831 count++;
4832 }
4833 }
4834
4835 if (cntdn) {
4836 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4837 ioc->name, count, howlong));
4838 return count;
4839 }
4840
4841 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4842 ioc->name, count, intstat);
4843 return -1;
4844}
4845
4846/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4847/**
4848 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4849 * @ioc: Pointer to MPT_ADAPTER structure
4850 * @howlong: How long to wait (in seconds)
4851 * @sleepFlag: Specifies whether the process can sleep
4852 *
4853 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4854 * Reply is cached to IOC private area large enough to hold a maximum
4855 * of 128 bytes of reply data.
4856 *
4857 * Returns a negative value on failure, else size of reply in WORDS.
4858 */
4859static int
4860WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4861{
4862 int u16cnt = 0;
4863 int failcnt = 0;
4864 int t;
4865 u16 *hs_reply = ioc->hs_reply;
4866 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4867 u16 hword;
4868
4869 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4870
4871 /*
4872 * Get first two u16's so we can look at IOC's intended reply MsgLength
4873 */
4874 u16cnt=0;
4875 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4876 failcnt++;
4877 } else {
4878 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4879 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4880 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4881 failcnt++;
4882 else {
4883 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4884 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4885 }
4886 }
4887
4888 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4889 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4890 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4891
4892 /*
4893 * If no error (and IOC said MsgLength is > 0), piece together
4894 * reply 16 bits at a time.
4895 */
4896 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4897 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4898 failcnt++;
4899 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4900 /* don't overflow our IOC hs_reply[] buffer! */
4901 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4902 hs_reply[u16cnt] = hword;
4903 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4904 }
4905
4906 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4907 failcnt++;
4908 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4909
4910 if (failcnt) {
4911 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4912 ioc->name);
4913 return -failcnt;
4914 }
4915#if 0
4916 else if (u16cnt != (2 * mptReply->MsgLength)) {
4917 return -101;
4918 }
4919 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4920 return -102;
4921 }
4922#endif
4923
4924 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4925 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4926
4927 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4928 ioc->name, t, u16cnt/2));
4929 return u16cnt/2;
4930}
4931
4932/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4933/**
4934 * GetLanConfigPages - Fetch LANConfig pages.
4935 * @ioc: Pointer to MPT_ADAPTER structure
4936 *
4937 * Return: 0 for success
4938 * -ENOMEM if no memory available
4939 * -EPERM if not allowed due to ISR context
4940 * -EAGAIN if no msg frames currently available
4941 * -EFAULT for non-successful reply or no reply (timeout)
4942 */
4943static int
4944GetLanConfigPages(MPT_ADAPTER *ioc)
4945{
4946 ConfigPageHeader_t hdr;
4947 CONFIGPARMS cfg;
4948 LANPage0_t *ppage0_alloc;
4949 dma_addr_t page0_dma;
4950 LANPage1_t *ppage1_alloc;
4951 dma_addr_t page1_dma;
4952 int rc = 0;
4953 int data_sz;
4954 int copy_sz;
4955
4956 /* Get LAN Page 0 header */
4957 hdr.PageVersion = 0;
4958 hdr.PageLength = 0;
4959 hdr.PageNumber = 0;
4960 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4961 cfg.cfghdr.hdr = &hdr;
4962 cfg.physAddr = -1;
4963 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4964 cfg.dir = 0;
4965 cfg.pageAddr = 0;
4966 cfg.timeout = 0;
4967
4968 if ((rc = mpt_config(ioc, &cfg)) != 0)
4969 return rc;
4970
4971 if (hdr.PageLength > 0) {
4972 data_sz = hdr.PageLength * 4;
4973 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4974 rc = -ENOMEM;
4975 if (ppage0_alloc) {
4976 memset((u8 *)ppage0_alloc, 0, data_sz);
4977 cfg.physAddr = page0_dma;
4978 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4979
4980 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4981 /* save the data */
4982 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4983 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4984
4985 }
4986
4987 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4988
4989 /* FIXME!
4990 * Normalize endianness of structure data,
4991 * by byte-swapping all > 1 byte fields!
4992 */
4993
4994 }
4995
4996 if (rc)
4997 return rc;
4998 }
4999
5000 /* Get LAN Page 1 header */
5001 hdr.PageVersion = 0;
5002 hdr.PageLength = 0;
5003 hdr.PageNumber = 1;
5004 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5005 cfg.cfghdr.hdr = &hdr;
5006 cfg.physAddr = -1;
5007 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5008 cfg.dir = 0;
5009 cfg.pageAddr = 0;
5010
5011 if ((rc = mpt_config(ioc, &cfg)) != 0)
5012 return rc;
5013
5014 if (hdr.PageLength == 0)
5015 return 0;
5016
5017 data_sz = hdr.PageLength * 4;
5018 rc = -ENOMEM;
5019 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5020 if (ppage1_alloc) {
5021 memset((u8 *)ppage1_alloc, 0, data_sz);
5022 cfg.physAddr = page1_dma;
5023 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5024
5025 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5026 /* save the data */
5027 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5028 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5029 }
5030
5031 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5032
5033 /* FIXME!
5034 * Normalize endianness of structure data,
5035 * by byte-swapping all > 1 byte fields!
5036 */
5037
5038 }
5039
5040 return rc;
5041}
5042
5043/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5044/**
5045 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5046 * @ioc: Pointer to MPT_ADAPTER structure
5047 * @persist_opcode: see below
5048 *
5049 * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
5050 * devices not currently present.
5051 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
5052 *
5053 * NOTE: Don't use not this function during interrupt time.
5054 *
5055 * Returns 0 for success, non-zero error
5056 */
5057
5058/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5059int
5060mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5061{
5062 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5063 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5064 MPT_FRAME_HDR *mf = NULL;
5065 MPIHeader_t *mpi_hdr;
5066 int ret = 0;
5067 unsigned long timeleft;
5068
5069 mutex_lock(&ioc->mptbase_cmds.mutex);
5070
5071 /* init the internal cmd struct */
5072 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5073 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5074
5075 /* insure garbage is not sent to fw */
5076 switch(persist_opcode) {
5077
5078 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5079 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5080 break;
5081
5082 default:
5083 ret = -1;
5084 goto out;
5085 }
5086
5087 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5088 __func__, persist_opcode);
5089
5090 /* Get a MF for this command.
5091 */
5092 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5093 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5094 ret = -1;
5095 goto out;
5096 }
5097
5098 mpi_hdr = (MPIHeader_t *) mf;
5099 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5100 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5101 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5102 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5103 sasIoUnitCntrReq->Operation = persist_opcode;
5104
5105 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5106 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5107 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5108 ret = -ETIME;
5109 printk(KERN_DEBUG "%s: failed\n", __func__);
5110 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5111 goto out;
5112 if (!timeleft) {
5113 printk(MYIOC_s_WARN_FMT
5114 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5115 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5116 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5117 mpt_free_msg_frame(ioc, mf);
5118 }
5119 goto out;
5120 }
5121
5122 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5123 ret = -1;
5124 goto out;
5125 }
5126
5127 sasIoUnitCntrReply =
5128 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5129 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5130 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5131 __func__, sasIoUnitCntrReply->IOCStatus,
5132 sasIoUnitCntrReply->IOCLogInfo);
5133 printk(KERN_DEBUG "%s: failed\n", __func__);
5134 ret = -1;
5135 } else
5136 printk(KERN_DEBUG "%s: success\n", __func__);
5137 out:
5138
5139 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5140 mutex_unlock(&ioc->mptbase_cmds.mutex);
5141 return ret;
5142}
5143
5144/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5145
5146static void
5147mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5148 MpiEventDataRaid_t * pRaidEventData)
5149{
5150 int volume;
5151 int reason;
5152 int disk;
5153 int status;
5154 int flags;
5155 int state;
5156
5157 volume = pRaidEventData->VolumeID;
5158 reason = pRaidEventData->ReasonCode;
5159 disk = pRaidEventData->PhysDiskNum;
5160 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5161 flags = (status >> 0) & 0xff;
5162 state = (status >> 8) & 0xff;
5163
5164 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5165 return;
5166 }
5167
5168 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5169 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5170 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5171 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5172 ioc->name, disk, volume);
5173 } else {
5174 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5175 ioc->name, volume);
5176 }
5177
5178 switch(reason) {
5179 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5180 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5181 ioc->name);
5182 break;
5183
5184 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5185
5186 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5187 ioc->name);
5188 break;
5189
5190 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5191 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5192 ioc->name);
5193 break;
5194
5195 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5196 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5197 ioc->name,
5198 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5199 ? "optimal"
5200 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5201 ? "degraded"
5202 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5203 ? "failed"
5204 : "state unknown",
5205 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5206 ? ", enabled" : "",
5207 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5208 ? ", quiesced" : "",
5209 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5210 ? ", resync in progress" : "" );
5211 break;
5212
5213 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5214 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5215 ioc->name, disk);
5216 break;
5217
5218 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5219 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5220 ioc->name);
5221 break;
5222
5223 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5224 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5225 ioc->name);
5226 break;
5227
5228 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5229 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5230 ioc->name);
5231 break;
5232
5233 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5234 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5235 ioc->name,
5236 state == MPI_PHYSDISK0_STATUS_ONLINE
5237 ? "online"
5238 : state == MPI_PHYSDISK0_STATUS_MISSING
5239 ? "missing"
5240 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5241 ? "not compatible"
5242 : state == MPI_PHYSDISK0_STATUS_FAILED
5243 ? "failed"
5244 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5245 ? "initializing"
5246 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5247 ? "offline requested"
5248 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5249 ? "failed requested"
5250 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5251 ? "offline"
5252 : "state unknown",
5253 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5254 ? ", out of sync" : "",
5255 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5256 ? ", quiesced" : "" );
5257 break;
5258
5259 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5260 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5261 ioc->name, disk);
5262 break;
5263
5264 case MPI_EVENT_RAID_RC_SMART_DATA:
5265 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5266 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5267 break;
5268
5269 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5270 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5271 ioc->name, disk);
5272 break;
5273 }
5274}
5275
5276/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5277/**
5278 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5279 * @ioc: Pointer to MPT_ADAPTER structure
5280 *
5281 * Returns: 0 for success
5282 * -ENOMEM if no memory available
5283 * -EPERM if not allowed due to ISR context
5284 * -EAGAIN if no msg frames currently available
5285 * -EFAULT for non-successful reply or no reply (timeout)
5286 */
5287static int
5288GetIoUnitPage2(MPT_ADAPTER *ioc)
5289{
5290 ConfigPageHeader_t hdr;
5291 CONFIGPARMS cfg;
5292 IOUnitPage2_t *ppage_alloc;
5293 dma_addr_t page_dma;
5294 int data_sz;
5295 int rc;
5296
5297 /* Get the page header */
5298 hdr.PageVersion = 0;
5299 hdr.PageLength = 0;
5300 hdr.PageNumber = 2;
5301 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5302 cfg.cfghdr.hdr = &hdr;
5303 cfg.physAddr = -1;
5304 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5305 cfg.dir = 0;
5306 cfg.pageAddr = 0;
5307 cfg.timeout = 0;
5308
5309 if ((rc = mpt_config(ioc, &cfg)) != 0)
5310 return rc;
5311
5312 if (hdr.PageLength == 0)
5313 return 0;
5314
5315 /* Read the config page */
5316 data_sz = hdr.PageLength * 4;
5317 rc = -ENOMEM;
5318 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5319 if (ppage_alloc) {
5320 memset((u8 *)ppage_alloc, 0, data_sz);
5321 cfg.physAddr = page_dma;
5322 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5323
5324 /* If Good, save data */
5325 if ((rc = mpt_config(ioc, &cfg)) == 0)
5326 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5327
5328 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5329 }
5330
5331 return rc;
5332}
5333
5334/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5335/**
5336 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5337 * @ioc: Pointer to a Adapter Strucutre
5338 * @portnum: IOC port number
5339 *
5340 * Return: -EFAULT if read of config page header fails
5341 * or if no nvram
5342 * If read of SCSI Port Page 0 fails,
5343 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5344 * Adapter settings: async, narrow
5345 * Return 1
5346 * If read of SCSI Port Page 2 fails,
5347 * Adapter settings valid
5348 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5349 * Return 1
5350 * Else
5351 * Both valid
5352 * Return 0
5353 * CHECK - what type of locking mechanisms should be used????
5354 */
5355static int
5356mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5357{
5358 u8 *pbuf;
5359 dma_addr_t buf_dma;
5360 CONFIGPARMS cfg;
5361 ConfigPageHeader_t header;
5362 int ii;
5363 int data, rc = 0;
5364
5365 /* Allocate memory
5366 */
5367 if (!ioc->spi_data.nvram) {
5368 int sz;
5369 u8 *mem;
5370 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5371 mem = kmalloc(sz, GFP_ATOMIC);
5372 if (mem == NULL)
5373 return -EFAULT;
5374
5375 ioc->spi_data.nvram = (int *) mem;
5376
5377 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5378 ioc->name, ioc->spi_data.nvram, sz));
5379 }
5380
5381 /* Invalidate NVRAM information
5382 */
5383 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5384 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5385 }
5386
5387 /* Read SPP0 header, allocate memory, then read page.
5388 */
5389 header.PageVersion = 0;
5390 header.PageLength = 0;
5391 header.PageNumber = 0;
5392 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5393 cfg.cfghdr.hdr = &header;
5394 cfg.physAddr = -1;
5395 cfg.pageAddr = portnum;
5396 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5397 cfg.dir = 0;
5398 cfg.timeout = 0; /* use default */
5399 if (mpt_config(ioc, &cfg) != 0)
5400 return -EFAULT;
5401
5402 if (header.PageLength > 0) {
5403 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5404 if (pbuf) {
5405 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5406 cfg.physAddr = buf_dma;
5407 if (mpt_config(ioc, &cfg) != 0) {
5408 ioc->spi_data.maxBusWidth = MPT_NARROW;
5409 ioc->spi_data.maxSyncOffset = 0;
5410 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5411 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5412 rc = 1;
5413 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5414 "Unable to read PortPage0 minSyncFactor=%x\n",
5415 ioc->name, ioc->spi_data.minSyncFactor));
5416 } else {
5417 /* Save the Port Page 0 data
5418 */
5419 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5420 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5421 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5422
5423 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5424 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5425 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5426 "noQas due to Capabilities=%x\n",
5427 ioc->name, pPP0->Capabilities));
5428 }
5429 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5430 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5431 if (data) {
5432 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5433 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5434 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5435 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5436 "PortPage0 minSyncFactor=%x\n",
5437 ioc->name, ioc->spi_data.minSyncFactor));
5438 } else {
5439 ioc->spi_data.maxSyncOffset = 0;
5440 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5441 }
5442
5443 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5444
5445 /* Update the minSyncFactor based on bus type.
5446 */
5447 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5448 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5449
5450 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5451 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5452 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5453 "HVD or SE detected, minSyncFactor=%x\n",
5454 ioc->name, ioc->spi_data.minSyncFactor));
5455 }
5456 }
5457 }
5458 if (pbuf) {
5459 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5460 }
5461 }
5462 }
5463
5464 /* SCSI Port Page 2 - Read the header then the page.
5465 */
5466 header.PageVersion = 0;
5467 header.PageLength = 0;
5468 header.PageNumber = 2;
5469 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5470 cfg.cfghdr.hdr = &header;
5471 cfg.physAddr = -1;
5472 cfg.pageAddr = portnum;
5473 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5474 cfg.dir = 0;
5475 if (mpt_config(ioc, &cfg) != 0)
5476 return -EFAULT;
5477
5478 if (header.PageLength > 0) {
5479 /* Allocate memory and read SCSI Port Page 2
5480 */
5481 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5482 if (pbuf) {
5483 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5484 cfg.physAddr = buf_dma;
5485 if (mpt_config(ioc, &cfg) != 0) {
5486 /* Nvram data is left with INVALID mark
5487 */
5488 rc = 1;
5489 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5490
5491 /* This is an ATTO adapter, read Page2 accordingly
5492 */
5493 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5494 ATTODeviceInfo_t *pdevice = NULL;
5495 u16 ATTOFlags;
5496
5497 /* Save the Port Page 2 data
5498 * (reformat into a 32bit quantity)
5499 */
5500 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5501 pdevice = &pPP2->DeviceSettings[ii];
5502 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5503 data = 0;
5504
5505 /* Translate ATTO device flags to LSI format
5506 */
5507 if (ATTOFlags & ATTOFLAG_DISC)
5508 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5509 if (ATTOFlags & ATTOFLAG_ID_ENB)
5510 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5511 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5512 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5513 if (ATTOFlags & ATTOFLAG_TAGGED)
5514 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5515 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5516 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5517
5518 data = (data << 16) | (pdevice->Period << 8) | 10;
5519 ioc->spi_data.nvram[ii] = data;
5520 }
5521 } else {
5522 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5523 MpiDeviceInfo_t *pdevice = NULL;
5524
5525 /*
5526 * Save "Set to Avoid SCSI Bus Resets" flag
5527 */
5528 ioc->spi_data.bus_reset =
5529 (le32_to_cpu(pPP2->PortFlags) &
5530 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5531 0 : 1 ;
5532
5533 /* Save the Port Page 2 data
5534 * (reformat into a 32bit quantity)
5535 */
5536 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5537 ioc->spi_data.PortFlags = data;
5538 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5539 pdevice = &pPP2->DeviceSettings[ii];
5540 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5541 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5542 ioc->spi_data.nvram[ii] = data;
5543 }
5544 }
5545
5546 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5547 }
5548 }
5549
5550 /* Update Adapter limits with those from NVRAM
5551 * Comment: Don't need to do this. Target performance
5552 * parameters will never exceed the adapters limits.
5553 */
5554
5555 return rc;
5556}
5557
5558/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5559/**
5560 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5561 * @ioc: Pointer to a Adapter Strucutre
5562 * @portnum: IOC port number
5563 *
5564 * Return: -EFAULT if read of config page header fails
5565 * or 0 if success.
5566 */
5567static int
5568mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5569{
5570 CONFIGPARMS cfg;
5571 ConfigPageHeader_t header;
5572
5573 /* Read the SCSI Device Page 1 header
5574 */
5575 header.PageVersion = 0;
5576 header.PageLength = 0;
5577 header.PageNumber = 1;
5578 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5579 cfg.cfghdr.hdr = &header;
5580 cfg.physAddr = -1;
5581 cfg.pageAddr = portnum;
5582 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5583 cfg.dir = 0;
5584 cfg.timeout = 0;
5585 if (mpt_config(ioc, &cfg) != 0)
5586 return -EFAULT;
5587
5588 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5589 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5590
5591 header.PageVersion = 0;
5592 header.PageLength = 0;
5593 header.PageNumber = 0;
5594 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5595 if (mpt_config(ioc, &cfg) != 0)
5596 return -EFAULT;
5597
5598 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5599 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5600
5601 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5602 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5603
5604 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5605 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5606 return 0;
5607}
5608
5609/**
5610 * mpt_inactive_raid_list_free - This clears this link list.
5611 * @ioc : pointer to per adapter structure
5612 **/
5613static void
5614mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5615{
5616 struct inactive_raid_component_info *component_info, *pNext;
5617
5618 if (list_empty(&ioc->raid_data.inactive_list))
5619 return;
5620
5621 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5622 list_for_each_entry_safe(component_info, pNext,
5623 &ioc->raid_data.inactive_list, list) {
5624 list_del(&component_info->list);
5625 kfree(component_info);
5626 }
5627 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5628}
5629
5630/**
5631 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5632 *
5633 * @ioc : pointer to per adapter structure
5634 * @channel : volume channel
5635 * @id : volume target id
5636 **/
5637static void
5638mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5639{
5640 CONFIGPARMS cfg;
5641 ConfigPageHeader_t hdr;
5642 dma_addr_t dma_handle;
5643 pRaidVolumePage0_t buffer = NULL;
5644 int i;
5645 RaidPhysDiskPage0_t phys_disk;
5646 struct inactive_raid_component_info *component_info;
5647 int handle_inactive_volumes;
5648
5649 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5650 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5651 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5652 cfg.pageAddr = (channel << 8) + id;
5653 cfg.cfghdr.hdr = &hdr;
5654 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5655
5656 if (mpt_config(ioc, &cfg) != 0)
5657 goto out;
5658
5659 if (!hdr.PageLength)
5660 goto out;
5661
5662 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5663 &dma_handle);
5664
5665 if (!buffer)
5666 goto out;
5667
5668 cfg.physAddr = dma_handle;
5669 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5670
5671 if (mpt_config(ioc, &cfg) != 0)
5672 goto out;
5673
5674 if (!buffer->NumPhysDisks)
5675 goto out;
5676
5677 handle_inactive_volumes =
5678 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5679 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5680 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5681 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5682
5683 if (!handle_inactive_volumes)
5684 goto out;
5685
5686 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5687 for (i = 0; i < buffer->NumPhysDisks; i++) {
5688 if(mpt_raid_phys_disk_pg0(ioc,
5689 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5690 continue;
5691
5692 if ((component_info = kmalloc(sizeof (*component_info),
5693 GFP_KERNEL)) == NULL)
5694 continue;
5695
5696 component_info->volumeID = id;
5697 component_info->volumeBus = channel;
5698 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5699 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5700 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5701 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5702
5703 list_add_tail(&component_info->list,
5704 &ioc->raid_data.inactive_list);
5705 }
5706 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5707
5708 out:
5709 if (buffer)
5710 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5711 dma_handle);
5712}
5713
5714/**
5715 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5716 * @ioc: Pointer to a Adapter Structure
5717 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5718 * @phys_disk: requested payload data returned
5719 *
5720 * Return:
5721 * 0 on success
5722 * -EFAULT if read of config page header fails or data pointer not NULL
5723 * -ENOMEM if pci_alloc failed
5724 **/
5725int
5726mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5727 RaidPhysDiskPage0_t *phys_disk)
5728{
5729 CONFIGPARMS cfg;
5730 ConfigPageHeader_t hdr;
5731 dma_addr_t dma_handle;
5732 pRaidPhysDiskPage0_t buffer = NULL;
5733 int rc;
5734
5735 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5736 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5737 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5738
5739 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5740 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5741 cfg.cfghdr.hdr = &hdr;
5742 cfg.physAddr = -1;
5743 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5744
5745 if (mpt_config(ioc, &cfg) != 0) {
5746 rc = -EFAULT;
5747 goto out;
5748 }
5749
5750 if (!hdr.PageLength) {
5751 rc = -EFAULT;
5752 goto out;
5753 }
5754
5755 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5756 &dma_handle);
5757
5758 if (!buffer) {
5759 rc = -ENOMEM;
5760 goto out;
5761 }
5762
5763 cfg.physAddr = dma_handle;
5764 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5765 cfg.pageAddr = phys_disk_num;
5766
5767 if (mpt_config(ioc, &cfg) != 0) {
5768 rc = -EFAULT;
5769 goto out;
5770 }
5771
5772 rc = 0;
5773 memcpy(phys_disk, buffer, sizeof(*buffer));
5774 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5775
5776 out:
5777
5778 if (buffer)
5779 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5780 dma_handle);
5781
5782 return rc;
5783}
5784
5785/**
5786 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5787 * @ioc: Pointer to a Adapter Structure
5788 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5789 *
5790 * Return:
5791 * returns number paths
5792 **/
5793int
5794mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5795{
5796 CONFIGPARMS cfg;
5797 ConfigPageHeader_t hdr;
5798 dma_addr_t dma_handle;
5799 pRaidPhysDiskPage1_t buffer = NULL;
5800 int rc;
5801
5802 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5803 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5804
5805 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5806 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5807 hdr.PageNumber = 1;
5808 cfg.cfghdr.hdr = &hdr;
5809 cfg.physAddr = -1;
5810 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5811
5812 if (mpt_config(ioc, &cfg) != 0) {
5813 rc = 0;
5814 goto out;
5815 }
5816
5817 if (!hdr.PageLength) {
5818 rc = 0;
5819 goto out;
5820 }
5821
5822 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5823 &dma_handle);
5824
5825 if (!buffer) {
5826 rc = 0;
5827 goto out;
5828 }
5829
5830 cfg.physAddr = dma_handle;
5831 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5832 cfg.pageAddr = phys_disk_num;
5833
5834 if (mpt_config(ioc, &cfg) != 0) {
5835 rc = 0;
5836 goto out;
5837 }
5838
5839 rc = buffer->NumPhysDiskPaths;
5840 out:
5841
5842 if (buffer)
5843 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5844 dma_handle);
5845
5846 return rc;
5847}
5848EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5849
5850/**
5851 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5852 * @ioc: Pointer to a Adapter Structure
5853 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5854 * @phys_disk: requested payload data returned
5855 *
5856 * Return:
5857 * 0 on success
5858 * -EFAULT if read of config page header fails or data pointer not NULL
5859 * -ENOMEM if pci_alloc failed
5860 **/
5861int
5862mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5863 RaidPhysDiskPage1_t *phys_disk)
5864{
5865 CONFIGPARMS cfg;
5866 ConfigPageHeader_t hdr;
5867 dma_addr_t dma_handle;
5868 pRaidPhysDiskPage1_t buffer = NULL;
5869 int rc;
5870 int i;
5871 __le64 sas_address;
5872
5873 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5874 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5875 rc = 0;
5876
5877 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5878 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5879 hdr.PageNumber = 1;
5880 cfg.cfghdr.hdr = &hdr;
5881 cfg.physAddr = -1;
5882 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5883
5884 if (mpt_config(ioc, &cfg) != 0) {
5885 rc = -EFAULT;
5886 goto out;
5887 }
5888
5889 if (!hdr.PageLength) {
5890 rc = -EFAULT;
5891 goto out;
5892 }
5893
5894 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5895 &dma_handle);
5896
5897 if (!buffer) {
5898 rc = -ENOMEM;
5899 goto out;
5900 }
5901
5902 cfg.physAddr = dma_handle;
5903 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5904 cfg.pageAddr = phys_disk_num;
5905
5906 if (mpt_config(ioc, &cfg) != 0) {
5907 rc = -EFAULT;
5908 goto out;
5909 }
5910
5911 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5912 phys_disk->PhysDiskNum = phys_disk_num;
5913 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5914 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5915 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5916 phys_disk->Path[i].OwnerIdentifier =
5917 buffer->Path[i].OwnerIdentifier;
5918 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5919 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5920 sas_address = le64_to_cpu(sas_address);
5921 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5922 memcpy(&sas_address,
5923 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5924 sas_address = le64_to_cpu(sas_address);
5925 memcpy(&phys_disk->Path[i].OwnerWWID,
5926 &sas_address, sizeof(__le64));
5927 }
5928
5929 out:
5930
5931 if (buffer)
5932 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5933 dma_handle);
5934
5935 return rc;
5936}
5937EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5938
5939
5940/**
5941 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5942 * @ioc: Pointer to a Adapter Strucutre
5943 *
5944 * Return:
5945 * 0 on success
5946 * -EFAULT if read of config page header fails or data pointer not NULL
5947 * -ENOMEM if pci_alloc failed
5948 **/
5949int
5950mpt_findImVolumes(MPT_ADAPTER *ioc)
5951{
5952 IOCPage2_t *pIoc2;
5953 u8 *mem;
5954 dma_addr_t ioc2_dma;
5955 CONFIGPARMS cfg;
5956 ConfigPageHeader_t header;
5957 int rc = 0;
5958 int iocpage2sz;
5959 int i;
5960
5961 if (!ioc->ir_firmware)
5962 return 0;
5963
5964 /* Free the old page
5965 */
5966 kfree(ioc->raid_data.pIocPg2);
5967 ioc->raid_data.pIocPg2 = NULL;
5968 mpt_inactive_raid_list_free(ioc);
5969
5970 /* Read IOCP2 header then the page.
5971 */
5972 header.PageVersion = 0;
5973 header.PageLength = 0;
5974 header.PageNumber = 2;
5975 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5976 cfg.cfghdr.hdr = &header;
5977 cfg.physAddr = -1;
5978 cfg.pageAddr = 0;
5979 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5980 cfg.dir = 0;
5981 cfg.timeout = 0;
5982 if (mpt_config(ioc, &cfg) != 0)
5983 return -EFAULT;
5984
5985 if (header.PageLength == 0)
5986 return -EFAULT;
5987
5988 iocpage2sz = header.PageLength * 4;
5989 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5990 if (!pIoc2)
5991 return -ENOMEM;
5992
5993 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5994 cfg.physAddr = ioc2_dma;
5995 if (mpt_config(ioc, &cfg) != 0)
5996 goto out;
5997
5998 mem = kmalloc(iocpage2sz, GFP_KERNEL);
5999 if (!mem) {
6000 rc = -ENOMEM;
6001 goto out;
6002 }
6003
6004 memcpy(mem, (u8 *)pIoc2, iocpage2sz);
6005 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6006
6007 mpt_read_ioc_pg_3(ioc);
6008
6009 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6010 mpt_inactive_raid_volumes(ioc,
6011 pIoc2->RaidVolume[i].VolumeBus,
6012 pIoc2->RaidVolume[i].VolumeID);
6013
6014 out:
6015 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6016
6017 return rc;
6018}
6019
6020static int
6021mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6022{
6023 IOCPage3_t *pIoc3;
6024 u8 *mem;
6025 CONFIGPARMS cfg;
6026 ConfigPageHeader_t header;
6027 dma_addr_t ioc3_dma;
6028 int iocpage3sz = 0;
6029
6030 /* Free the old page
6031 */
6032 kfree(ioc->raid_data.pIocPg3);
6033 ioc->raid_data.pIocPg3 = NULL;
6034
6035 /* There is at least one physical disk.
6036 * Read and save IOC Page 3
6037 */
6038 header.PageVersion = 0;
6039 header.PageLength = 0;
6040 header.PageNumber = 3;
6041 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6042 cfg.cfghdr.hdr = &header;
6043 cfg.physAddr = -1;
6044 cfg.pageAddr = 0;
6045 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6046 cfg.dir = 0;
6047 cfg.timeout = 0;
6048 if (mpt_config(ioc, &cfg) != 0)
6049 return 0;
6050
6051 if (header.PageLength == 0)
6052 return 0;
6053
6054 /* Read Header good, alloc memory
6055 */
6056 iocpage3sz = header.PageLength * 4;
6057 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6058 if (!pIoc3)
6059 return 0;
6060
6061 /* Read the Page and save the data
6062 * into malloc'd memory.
6063 */
6064 cfg.physAddr = ioc3_dma;
6065 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6066 if (mpt_config(ioc, &cfg) == 0) {
6067 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6068 if (mem) {
6069 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6070 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6071 }
6072 }
6073
6074 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6075
6076 return 0;
6077}
6078
6079static void
6080mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6081{
6082 IOCPage4_t *pIoc4;
6083 CONFIGPARMS cfg;
6084 ConfigPageHeader_t header;
6085 dma_addr_t ioc4_dma;
6086 int iocpage4sz;
6087
6088 /* Read and save IOC Page 4
6089 */
6090 header.PageVersion = 0;
6091 header.PageLength = 0;
6092 header.PageNumber = 4;
6093 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6094 cfg.cfghdr.hdr = &header;
6095 cfg.physAddr = -1;
6096 cfg.pageAddr = 0;
6097 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6098 cfg.dir = 0;
6099 cfg.timeout = 0;
6100 if (mpt_config(ioc, &cfg) != 0)
6101 return;
6102
6103 if (header.PageLength == 0)
6104 return;
6105
6106 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6107 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6108 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6109 if (!pIoc4)
6110 return;
6111 ioc->alloc_total += iocpage4sz;
6112 } else {
6113 ioc4_dma = ioc->spi_data.IocPg4_dma;
6114 iocpage4sz = ioc->spi_data.IocPg4Sz;
6115 }
6116
6117 /* Read the Page into dma memory.
6118 */
6119 cfg.physAddr = ioc4_dma;
6120 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6121 if (mpt_config(ioc, &cfg) == 0) {
6122 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6123 ioc->spi_data.IocPg4_dma = ioc4_dma;
6124 ioc->spi_data.IocPg4Sz = iocpage4sz;
6125 } else {
6126 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6127 ioc->spi_data.pIocPg4 = NULL;
6128 ioc->alloc_total -= iocpage4sz;
6129 }
6130}
6131
6132static void
6133mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6134{
6135 IOCPage1_t *pIoc1;
6136 CONFIGPARMS cfg;
6137 ConfigPageHeader_t header;
6138 dma_addr_t ioc1_dma;
6139 int iocpage1sz = 0;
6140 u32 tmp;
6141
6142 /* Check the Coalescing Timeout in IOC Page 1
6143 */
6144 header.PageVersion = 0;
6145 header.PageLength = 0;
6146 header.PageNumber = 1;
6147 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6148 cfg.cfghdr.hdr = &header;
6149 cfg.physAddr = -1;
6150 cfg.pageAddr = 0;
6151 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6152 cfg.dir = 0;
6153 cfg.timeout = 0;
6154 if (mpt_config(ioc, &cfg) != 0)
6155 return;
6156
6157 if (header.PageLength == 0)
6158 return;
6159
6160 /* Read Header good, alloc memory
6161 */
6162 iocpage1sz = header.PageLength * 4;
6163 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6164 if (!pIoc1)
6165 return;
6166
6167 /* Read the Page and check coalescing timeout
6168 */
6169 cfg.physAddr = ioc1_dma;
6170 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6171 if (mpt_config(ioc, &cfg) == 0) {
6172
6173 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6174 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6175 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6176
6177 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6178 ioc->name, tmp));
6179
6180 if (tmp > MPT_COALESCING_TIMEOUT) {
6181 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6182
6183 /* Write NVRAM and current
6184 */
6185 cfg.dir = 1;
6186 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6187 if (mpt_config(ioc, &cfg) == 0) {
6188 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6189 ioc->name, MPT_COALESCING_TIMEOUT));
6190
6191 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6192 if (mpt_config(ioc, &cfg) == 0) {
6193 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6194 "Reset NVRAM Coalescing Timeout to = %d\n",
6195 ioc->name, MPT_COALESCING_TIMEOUT));
6196 } else {
6197 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6198 "Reset NVRAM Coalescing Timeout Failed\n",
6199 ioc->name));
6200 }
6201
6202 } else {
6203 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6204 "Reset of Current Coalescing Timeout Failed!\n",
6205 ioc->name));
6206 }
6207 }
6208
6209 } else {
6210 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6211 }
6212 }
6213
6214 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6215
6216 return;
6217}
6218
6219static void
6220mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6221{
6222 CONFIGPARMS cfg;
6223 ConfigPageHeader_t hdr;
6224 dma_addr_t buf_dma;
6225 ManufacturingPage0_t *pbuf = NULL;
6226
6227 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6228 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6229
6230 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6231 cfg.cfghdr.hdr = &hdr;
6232 cfg.physAddr = -1;
6233 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6234 cfg.timeout = 10;
6235
6236 if (mpt_config(ioc, &cfg) != 0)
6237 goto out;
6238
6239 if (!cfg.cfghdr.hdr->PageLength)
6240 goto out;
6241
6242 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6243 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6244 if (!pbuf)
6245 goto out;
6246
6247 cfg.physAddr = buf_dma;
6248
6249 if (mpt_config(ioc, &cfg) != 0)
6250 goto out;
6251
6252 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6253 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6254 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6255
6256out:
6257
6258 if (pbuf)
6259 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6260}
6261
6262/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6263/**
6264 * SendEventNotification - Send EventNotification (on or off) request to adapter
6265 * @ioc: Pointer to MPT_ADAPTER structure
6266 * @EvSwitch: Event switch flags
6267 * @sleepFlag: Specifies whether the process can sleep
6268 */
6269static int
6270SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6271{
6272 EventNotification_t evn;
6273 MPIDefaultReply_t reply_buf;
6274
6275 memset(&evn, 0, sizeof(EventNotification_t));
6276 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6277
6278 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6279 evn.Switch = EvSwitch;
6280 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6281
6282 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6283 "Sending EventNotification (%d) request %p\n",
6284 ioc->name, EvSwitch, &evn));
6285
6286 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6287 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6288 sleepFlag);
6289}
6290
6291/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6292/**
6293 * SendEventAck - Send EventAck request to MPT adapter.
6294 * @ioc: Pointer to MPT_ADAPTER structure
6295 * @evnp: Pointer to original EventNotification request
6296 */
6297static int
6298SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6299{
6300 EventAck_t *pAck;
6301
6302 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6303 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6304 ioc->name, __func__));
6305 return -1;
6306 }
6307
6308 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6309
6310 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6311 pAck->ChainOffset = 0;
6312 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6313 pAck->MsgFlags = 0;
6314 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6315 pAck->Event = evnp->Event;
6316 pAck->EventContext = evnp->EventContext;
6317
6318 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6319
6320 return 0;
6321}
6322
6323/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6324/**
6325 * mpt_config - Generic function to issue config message
6326 * @ioc: Pointer to an adapter structure
6327 * @pCfg: Pointer to a configuration structure. Struct contains
6328 * action, page address, direction, physical address
6329 * and pointer to a configuration page header
6330 * Page header is updated.
6331 *
6332 * Returns 0 for success
6333 * -EPERM if not allowed due to ISR context
6334 * -EAGAIN if no msg frames currently available
6335 * -EFAULT for non-successful reply or no reply (timeout)
6336 */
6337int
6338mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6339{
6340 Config_t *pReq;
6341 ConfigReply_t *pReply;
6342 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6343 MPT_FRAME_HDR *mf;
6344 int ii;
6345 int flagsLength;
6346 long timeout;
6347 int ret;
6348 u8 page_type = 0, extend_page;
6349 unsigned long timeleft;
6350 unsigned long flags;
6351 int in_isr;
6352 u8 issue_hard_reset = 0;
6353 u8 retry_count = 0;
6354
6355 /* Prevent calling wait_event() (below), if caller happens
6356 * to be in ISR context, because that is fatal!
6357 */
6358 in_isr = in_interrupt();
6359 if (in_isr) {
6360 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6361 ioc->name));
6362 return -EPERM;
6363 }
6364
6365 /* don't send a config page during diag reset */
6366 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6367 if (ioc->ioc_reset_in_progress) {
6368 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6369 "%s: busy with host reset\n", ioc->name, __func__));
6370 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6371 return -EBUSY;
6372 }
6373 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6374
6375 /* don't send if no chance of success */
6376 if (!ioc->active ||
6377 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6378 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6379 "%s: ioc not operational, %d, %xh\n",
6380 ioc->name, __func__, ioc->active,
6381 mpt_GetIocState(ioc, 0)));
6382 return -EFAULT;
6383 }
6384
6385 retry_config:
6386 mutex_lock(&ioc->mptbase_cmds.mutex);
6387 /* init the internal cmd struct */
6388 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6389 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6390
6391 /* Get and Populate a free Frame
6392 */
6393 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6394 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6395 "mpt_config: no msg frames!\n", ioc->name));
6396 ret = -EAGAIN;
6397 goto out;
6398 }
6399
6400 pReq = (Config_t *)mf;
6401 pReq->Action = pCfg->action;
6402 pReq->Reserved = 0;
6403 pReq->ChainOffset = 0;
6404 pReq->Function = MPI_FUNCTION_CONFIG;
6405
6406 /* Assume page type is not extended and clear "reserved" fields. */
6407 pReq->ExtPageLength = 0;
6408 pReq->ExtPageType = 0;
6409 pReq->MsgFlags = 0;
6410
6411 for (ii=0; ii < 8; ii++)
6412 pReq->Reserved2[ii] = 0;
6413
6414 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6415 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6416 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6417 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6418
6419 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6420 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6421 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6422 pReq->ExtPageType = pExtHdr->ExtPageType;
6423 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6424
6425 /* Page Length must be treated as a reserved field for the
6426 * extended header.
6427 */
6428 pReq->Header.PageLength = 0;
6429 }
6430
6431 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6432
6433 /* Add a SGE to the config request.
6434 */
6435 if (pCfg->dir)
6436 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6437 else
6438 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6439
6440 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6441 MPI_CONFIG_PAGETYPE_EXTENDED) {
6442 flagsLength |= pExtHdr->ExtPageLength * 4;
6443 page_type = pReq->ExtPageType;
6444 extend_page = 1;
6445 } else {
6446 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6447 page_type = pReq->Header.PageType;
6448 extend_page = 0;
6449 }
6450
6451 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6452 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6453 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6454
6455 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6456 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6457 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6458 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6459 timeout);
6460 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6461 ret = -ETIME;
6462 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6463 "Failed Sending Config request type 0x%x, page 0x%x,"
6464 " action %d, status %xh, time left %ld\n\n",
6465 ioc->name, page_type, pReq->Header.PageNumber,
6466 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6467 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6468 goto out;
6469 if (!timeleft) {
6470 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6471 if (ioc->ioc_reset_in_progress) {
6472 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6473 flags);
6474 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6475 " progress mpt_config timed out.!!\n",
6476 __func__, ioc->name);
6477 mutex_unlock(&ioc->mptbase_cmds.mutex);
6478 return -EFAULT;
6479 }
6480 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6481 issue_hard_reset = 1;
6482 }
6483 goto out;
6484 }
6485
6486 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6487 ret = -1;
6488 goto out;
6489 }
6490 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6491 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6492 if (ret == MPI_IOCSTATUS_SUCCESS) {
6493 if (extend_page) {
6494 pCfg->cfghdr.ehdr->ExtPageLength =
6495 le16_to_cpu(pReply->ExtPageLength);
6496 pCfg->cfghdr.ehdr->ExtPageType =
6497 pReply->ExtPageType;
6498 }
6499 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6500 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6501 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6502 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6503
6504 }
6505
6506 if (retry_count)
6507 printk(MYIOC_s_INFO_FMT "Retry completed "
6508 "ret=0x%x timeleft=%ld\n",
6509 ioc->name, ret, timeleft);
6510
6511 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6512 ret, le32_to_cpu(pReply->IOCLogInfo)));
6513
6514out:
6515
6516 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6517 mutex_unlock(&ioc->mptbase_cmds.mutex);
6518 if (issue_hard_reset) {
6519 issue_hard_reset = 0;
6520 printk(MYIOC_s_WARN_FMT
6521 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6522 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6523 if (retry_count == 0) {
6524 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6525 retry_count++;
6526 } else
6527 mpt_HardResetHandler(ioc, CAN_SLEEP);
6528
6529 mpt_free_msg_frame(ioc, mf);
6530 /* attempt one retry for a timed out command */
6531 if (retry_count < 2) {
6532 printk(MYIOC_s_INFO_FMT
6533 "Attempting Retry Config request"
6534 " type 0x%x, page 0x%x,"
6535 " action %d\n", ioc->name, page_type,
6536 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6537 retry_count++;
6538 goto retry_config;
6539 }
6540 }
6541 return ret;
6542
6543}
6544
6545/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6546/**
6547 * mpt_ioc_reset - Base cleanup for hard reset
6548 * @ioc: Pointer to the adapter structure
6549 * @reset_phase: Indicates pre- or post-reset functionality
6550 *
6551 * Remark: Frees resources with internally generated commands.
6552 */
6553static int
6554mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6555{
6556 switch (reset_phase) {
6557 case MPT_IOC_SETUP_RESET:
6558 ioc->taskmgmt_quiesce_io = 1;
6559 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6560 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6561 break;
6562 case MPT_IOC_PRE_RESET:
6563 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6564 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6565 break;
6566 case MPT_IOC_POST_RESET:
6567 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6568 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6569/* wake up mptbase_cmds */
6570 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6571 ioc->mptbase_cmds.status |=
6572 MPT_MGMT_STATUS_DID_IOCRESET;
6573 complete(&ioc->mptbase_cmds.done);
6574 }
6575/* wake up taskmgmt_cmds */
6576 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6577 ioc->taskmgmt_cmds.status |=
6578 MPT_MGMT_STATUS_DID_IOCRESET;
6579 complete(&ioc->taskmgmt_cmds.done);
6580 }
6581 break;
6582 default:
6583 break;
6584 }
6585
6586 return 1; /* currently means nothing really */
6587}
6588
6589
6590#ifdef CONFIG_PROC_FS /* { */
6591/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6592/*
6593 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6594 */
6595/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6596/**
6597 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6598 *
6599 * Returns 0 for success, non-zero for failure.
6600 */
6601static int
6602procmpt_create(void)
6603{
6604 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6605 if (mpt_proc_root_dir == NULL)
6606 return -ENOTDIR;
6607
6608 proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
6609 proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
6610 return 0;
6611}
6612
6613/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6614/**
6615 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6616 *
6617 * Returns 0 for success, non-zero for failure.
6618 */
6619static void
6620procmpt_destroy(void)
6621{
6622 remove_proc_entry("version", mpt_proc_root_dir);
6623 remove_proc_entry("summary", mpt_proc_root_dir);
6624 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6625}
6626
6627/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6628/*
6629 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6630 */
6631static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6632
6633static int mpt_summary_proc_show(struct seq_file *m, void *v)
6634{
6635 MPT_ADAPTER *ioc = m->private;
6636
6637 if (ioc) {
6638 seq_mpt_print_ioc_summary(ioc, m, 1);
6639 } else {
6640 list_for_each_entry(ioc, &ioc_list, list) {
6641 seq_mpt_print_ioc_summary(ioc, m, 1);
6642 }
6643 }
6644
6645 return 0;
6646}
6647
6648static int mpt_summary_proc_open(struct inode *inode, struct file *file)
6649{
6650 return single_open(file, mpt_summary_proc_show, PDE_DATA(inode));
6651}
6652
6653static const struct file_operations mpt_summary_proc_fops = {
6654 .owner = THIS_MODULE,
6655 .open = mpt_summary_proc_open,
6656 .read = seq_read,
6657 .llseek = seq_lseek,
6658 .release = single_release,
6659};
6660
6661static int mpt_version_proc_show(struct seq_file *m, void *v)
6662{
6663 u8 cb_idx;
6664 int scsi, fc, sas, lan, ctl, targ, dmp;
6665 char *drvname;
6666
6667 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6668 seq_printf(m, " Fusion MPT base driver\n");
6669
6670 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6671 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6672 drvname = NULL;
6673 if (MptCallbacks[cb_idx]) {
6674 switch (MptDriverClass[cb_idx]) {
6675 case MPTSPI_DRIVER:
6676 if (!scsi++) drvname = "SPI host";
6677 break;
6678 case MPTFC_DRIVER:
6679 if (!fc++) drvname = "FC host";
6680 break;
6681 case MPTSAS_DRIVER:
6682 if (!sas++) drvname = "SAS host";
6683 break;
6684 case MPTLAN_DRIVER:
6685 if (!lan++) drvname = "LAN";
6686 break;
6687 case MPTSTM_DRIVER:
6688 if (!targ++) drvname = "SCSI target";
6689 break;
6690 case MPTCTL_DRIVER:
6691 if (!ctl++) drvname = "ioctl";
6692 break;
6693 }
6694
6695 if (drvname)
6696 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6697 }
6698 }
6699
6700 return 0;
6701}
6702
6703static int mpt_version_proc_open(struct inode *inode, struct file *file)
6704{
6705 return single_open(file, mpt_version_proc_show, NULL);
6706}
6707
6708static const struct file_operations mpt_version_proc_fops = {
6709 .owner = THIS_MODULE,
6710 .open = mpt_version_proc_open,
6711 .read = seq_read,
6712 .llseek = seq_lseek,
6713 .release = single_release,
6714};
6715
6716static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6717{
6718 MPT_ADAPTER *ioc = m->private;
6719 char expVer[32];
6720 int sz;
6721 int p;
6722
6723 mpt_get_fw_exp_ver(expVer, ioc);
6724
6725 seq_printf(m, "%s:", ioc->name);
6726 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6727 seq_printf(m, " (f/w download boot flag set)");
6728// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6729// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6730
6731 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6732 ioc->facts.ProductID,
6733 ioc->prod_name);
6734 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6735 if (ioc->facts.FWImageSize)
6736 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6737 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6738 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6739 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6740
6741 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6742 ioc->facts.CurrentHostMfaHighAddr);
6743 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6744 ioc->facts.CurrentSenseBufferHighAddr);
6745
6746 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6747 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6748
6749 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6750 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6751 /*
6752 * Rounding UP to nearest 4-kB boundary here...
6753 */
6754 sz = (ioc->req_sz * ioc->req_depth) + 128;
6755 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6756 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6757 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6758 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6759 4*ioc->facts.RequestFrameSize,
6760 ioc->facts.GlobalCredits);
6761
6762 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6763 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6764 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6765 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6766 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6767 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6768 ioc->facts.CurReplyFrameSize,
6769 ioc->facts.ReplyQueueDepth);
6770
6771 seq_printf(m, " MaxDevices = %d\n",
6772 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6773 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6774
6775 /* per-port info */
6776 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6777 seq_printf(m, " PortNumber = %d (of %d)\n",
6778 p+1,
6779 ioc->facts.NumberOfPorts);
6780 if (ioc->bus_type == FC) {
6781 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6782 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6783 seq_printf(m, " LanAddr = %pMR\n", a);
6784 }
6785 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6786 ioc->fc_port_page0[p].WWNN.High,
6787 ioc->fc_port_page0[p].WWNN.Low,
6788 ioc->fc_port_page0[p].WWPN.High,
6789 ioc->fc_port_page0[p].WWPN.Low);
6790 }
6791 }
6792
6793 return 0;
6794}
6795
6796static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
6797{
6798 return single_open(file, mpt_iocinfo_proc_show, PDE_DATA(inode));
6799}
6800
6801static const struct file_operations mpt_iocinfo_proc_fops = {
6802 .owner = THIS_MODULE,
6803 .open = mpt_iocinfo_proc_open,
6804 .read = seq_read,
6805 .llseek = seq_lseek,
6806 .release = single_release,
6807};
6808#endif /* CONFIG_PROC_FS } */
6809
6810/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6811static void
6812mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6813{
6814 buf[0] ='\0';
6815 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6816 sprintf(buf, " (Exp %02d%02d)",
6817 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6818 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6819
6820 /* insider hack! */
6821 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6822 strcat(buf, " [MDBG]");
6823 }
6824}
6825
6826/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6827/**
6828 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6829 * @ioc: Pointer to MPT_ADAPTER structure
6830 * @buffer: Pointer to buffer where IOC summary info should be written
6831 * @size: Pointer to number of bytes we wrote (set by this routine)
6832 * @len: Offset at which to start writing in buffer
6833 * @showlan: Display LAN stuff?
6834 *
6835 * This routine writes (english readable) ASCII text, which represents
6836 * a summary of IOC information, to a buffer.
6837 */
6838void
6839mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6840{
6841 char expVer[32];
6842 int y;
6843
6844 mpt_get_fw_exp_ver(expVer, ioc);
6845
6846 /*
6847 * Shorter summary of attached ioc's...
6848 */
6849 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6850 ioc->name,
6851 ioc->prod_name,
6852 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6853 ioc->facts.FWVersion.Word,
6854 expVer,
6855 ioc->facts.NumberOfPorts,
6856 ioc->req_depth);
6857
6858 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6859 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6860 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
6861 }
6862
6863 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6864
6865 if (!ioc->active)
6866 y += sprintf(buffer+len+y, " (disabled)");
6867
6868 y += sprintf(buffer+len+y, "\n");
6869
6870 *size = y;
6871}
6872
6873#ifdef CONFIG_PROC_FS
6874static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6875{
6876 char expVer[32];
6877
6878 mpt_get_fw_exp_ver(expVer, ioc);
6879
6880 /*
6881 * Shorter summary of attached ioc's...
6882 */
6883 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6884 ioc->name,
6885 ioc->prod_name,
6886 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6887 ioc->facts.FWVersion.Word,
6888 expVer,
6889 ioc->facts.NumberOfPorts,
6890 ioc->req_depth);
6891
6892 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6893 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6894 seq_printf(m, ", LanAddr=%pMR", a);
6895 }
6896
6897 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6898
6899 if (!ioc->active)
6900 seq_printf(m, " (disabled)");
6901
6902 seq_putc(m, '\n');
6903}
6904#endif
6905
6906/**
6907 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6908 * @ioc: Pointer to MPT_ADAPTER structure
6909 *
6910 * Returns 0 for SUCCESS or -1 if FAILED.
6911 *
6912 * If -1 is return, then it was not possible to set the flags
6913 **/
6914int
6915mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6916{
6917 unsigned long flags;
6918 int retval;
6919
6920 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6921 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6922 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6923 retval = -1;
6924 goto out;
6925 }
6926 retval = 0;
6927 ioc->taskmgmt_in_progress = 1;
6928 ioc->taskmgmt_quiesce_io = 1;
6929 if (ioc->alt_ioc) {
6930 ioc->alt_ioc->taskmgmt_in_progress = 1;
6931 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6932 }
6933 out:
6934 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6935 return retval;
6936}
6937EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6938
6939/**
6940 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6941 * @ioc: Pointer to MPT_ADAPTER structure
6942 *
6943 **/
6944void
6945mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6946{
6947 unsigned long flags;
6948
6949 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6950 ioc->taskmgmt_in_progress = 0;
6951 ioc->taskmgmt_quiesce_io = 0;
6952 if (ioc->alt_ioc) {
6953 ioc->alt_ioc->taskmgmt_in_progress = 0;
6954 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6955 }
6956 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6957}
6958EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6959
6960
6961/**
6962 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6963 * the kernel
6964 * @ioc: Pointer to MPT_ADAPTER structure
6965 *
6966 **/
6967void
6968mpt_halt_firmware(MPT_ADAPTER *ioc)
6969{
6970 u32 ioc_raw_state;
6971
6972 ioc_raw_state = mpt_GetIocState(ioc, 0);
6973
6974 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6975 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6976 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6977 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6978 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6979 } else {
6980 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6981 panic("%s: Firmware is halted due to command timeout\n",
6982 ioc->name);
6983 }
6984}
6985EXPORT_SYMBOL(mpt_halt_firmware);
6986
6987/**
6988 * mpt_SoftResetHandler - Issues a less expensive reset
6989 * @ioc: Pointer to MPT_ADAPTER structure
6990 * @sleepFlag: Indicates if sleep or schedule must be called.
6991 *
6992 * Returns 0 for SUCCESS or -1 if FAILED.
6993 *
6994 * Message Unit Reset - instructs the IOC to reset the Reply Post and
6995 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6996 * All posted buffers are freed, and event notification is turned off.
6997 * IOC doesn't reply to any outstanding request. This will transfer IOC
6998 * to READY state.
6999 **/
7000static int
7001mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7002{
7003 int rc;
7004 int ii;
7005 u8 cb_idx;
7006 unsigned long flags;
7007 u32 ioc_state;
7008 unsigned long time_count;
7009
7010 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
7011 ioc->name));
7012
7013 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7014
7015 if (mpt_fwfault_debug)
7016 mpt_halt_firmware(ioc);
7017
7018 if (ioc_state == MPI_IOC_STATE_FAULT ||
7019 ioc_state == MPI_IOC_STATE_RESET) {
7020 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7021 "skipping, either in FAULT or RESET state!\n", ioc->name));
7022 return -1;
7023 }
7024
7025 if (ioc->bus_type == FC) {
7026 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7027 "skipping, because the bus type is FC!\n", ioc->name));
7028 return -1;
7029 }
7030
7031 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7032 if (ioc->ioc_reset_in_progress) {
7033 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7034 return -1;
7035 }
7036 ioc->ioc_reset_in_progress = 1;
7037 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7038
7039 rc = -1;
7040
7041 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7042 if (MptResetHandlers[cb_idx])
7043 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7044 }
7045
7046 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7047 if (ioc->taskmgmt_in_progress) {
7048 ioc->ioc_reset_in_progress = 0;
7049 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7050 return -1;
7051 }
7052 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7053 /* Disable reply interrupts (also blocks FreeQ) */
7054 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7055 ioc->active = 0;
7056 time_count = jiffies;
7057
7058 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7059
7060 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7061 if (MptResetHandlers[cb_idx])
7062 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7063 }
7064
7065 if (rc)
7066 goto out;
7067
7068 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7069 if (ioc_state != MPI_IOC_STATE_READY)
7070 goto out;
7071
7072 for (ii = 0; ii < 5; ii++) {
7073 /* Get IOC facts! Allow 5 retries */
7074 rc = GetIocFacts(ioc, sleepFlag,
7075 MPT_HOSTEVENT_IOC_RECOVER);
7076 if (rc == 0)
7077 break;
7078 if (sleepFlag == CAN_SLEEP)
7079 msleep(100);
7080 else
7081 mdelay(100);
7082 }
7083 if (ii == 5)
7084 goto out;
7085
7086 rc = PrimeIocFifos(ioc);
7087 if (rc != 0)
7088 goto out;
7089
7090 rc = SendIocInit(ioc, sleepFlag);
7091 if (rc != 0)
7092 goto out;
7093
7094 rc = SendEventNotification(ioc, 1, sleepFlag);
7095 if (rc != 0)
7096 goto out;
7097
7098 if (ioc->hard_resets < -1)
7099 ioc->hard_resets++;
7100
7101 /*
7102 * At this point, we know soft reset succeeded.
7103 */
7104
7105 ioc->active = 1;
7106 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7107
7108 out:
7109 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7110 ioc->ioc_reset_in_progress = 0;
7111 ioc->taskmgmt_quiesce_io = 0;
7112 ioc->taskmgmt_in_progress = 0;
7113 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7114
7115 if (ioc->active) { /* otherwise, hard reset coming */
7116 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7117 if (MptResetHandlers[cb_idx])
7118 mpt_signal_reset(cb_idx, ioc,
7119 MPT_IOC_POST_RESET);
7120 }
7121 }
7122
7123 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7124 "SoftResetHandler: completed (%d seconds): %s\n",
7125 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7126 ((rc == 0) ? "SUCCESS" : "FAILED")));
7127
7128 return rc;
7129}
7130
7131/**
7132 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7133 * @ioc: Pointer to MPT_ADAPTER structure
7134 * @sleepFlag: Indicates if sleep or schedule must be called.
7135 *
7136 * Returns 0 for SUCCESS or -1 if FAILED.
7137 * Try for softreset first, only if it fails go for expensive
7138 * HardReset.
7139 **/
7140int
7141mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7142 int ret = -1;
7143
7144 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7145 if (ret == 0)
7146 return ret;
7147 ret = mpt_HardResetHandler(ioc, sleepFlag);
7148 return ret;
7149}
7150EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7151
7152/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7153/*
7154 * Reset Handling
7155 */
7156/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7157/**
7158 * mpt_HardResetHandler - Generic reset handler
7159 * @ioc: Pointer to MPT_ADAPTER structure
7160 * @sleepFlag: Indicates if sleep or schedule must be called.
7161 *
7162 * Issues SCSI Task Management call based on input arg values.
7163 * If TaskMgmt fails, returns associated SCSI request.
7164 *
7165 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7166 * or a non-interrupt thread. In the former, must not call schedule().
7167 *
7168 * Note: A return of -1 is a FATAL error case, as it means a
7169 * FW reload/initialization failed.
7170 *
7171 * Returns 0 for SUCCESS or -1 if FAILED.
7172 */
7173int
7174mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7175{
7176 int rc;
7177 u8 cb_idx;
7178 unsigned long flags;
7179 unsigned long time_count;
7180
7181 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7182#ifdef MFCNT
7183 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7184 printk("MF count 0x%x !\n", ioc->mfcnt);
7185#endif
7186 if (mpt_fwfault_debug)
7187 mpt_halt_firmware(ioc);
7188
7189 /* Reset the adapter. Prevent more than 1 call to
7190 * mpt_do_ioc_recovery at any instant in time.
7191 */
7192 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7193 if (ioc->ioc_reset_in_progress) {
7194 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7195 ioc->wait_on_reset_completion = 1;
7196 do {
7197 ssleep(1);
7198 } while (ioc->ioc_reset_in_progress == 1);
7199 ioc->wait_on_reset_completion = 0;
7200 return ioc->reset_status;
7201 }
7202 if (ioc->wait_on_reset_completion) {
7203 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7204 rc = 0;
7205 time_count = jiffies;
7206 goto exit;
7207 }
7208 ioc->ioc_reset_in_progress = 1;
7209 if (ioc->alt_ioc)
7210 ioc->alt_ioc->ioc_reset_in_progress = 1;
7211 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7212
7213
7214 /* The SCSI driver needs to adjust timeouts on all current
7215 * commands prior to the diagnostic reset being issued.
7216 * Prevents timeouts occurring during a diagnostic reset...very bad.
7217 * For all other protocol drivers, this is a no-op.
7218 */
7219 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7220 if (MptResetHandlers[cb_idx]) {
7221 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7222 if (ioc->alt_ioc)
7223 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7224 MPT_IOC_SETUP_RESET);
7225 }
7226 }
7227
7228 time_count = jiffies;
7229 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7230 if (rc != 0) {
7231 printk(KERN_WARNING MYNAM
7232 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7233 rc, ioc->name, mpt_GetIocState(ioc, 0));
7234 } else {
7235 if (ioc->hard_resets < -1)
7236 ioc->hard_resets++;
7237 }
7238
7239 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7240 ioc->ioc_reset_in_progress = 0;
7241 ioc->taskmgmt_quiesce_io = 0;
7242 ioc->taskmgmt_in_progress = 0;
7243 ioc->reset_status = rc;
7244 if (ioc->alt_ioc) {
7245 ioc->alt_ioc->ioc_reset_in_progress = 0;
7246 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7247 ioc->alt_ioc->taskmgmt_in_progress = 0;
7248 }
7249 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7250
7251 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7252 if (MptResetHandlers[cb_idx]) {
7253 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7254 if (ioc->alt_ioc)
7255 mpt_signal_reset(cb_idx,
7256 ioc->alt_ioc, MPT_IOC_POST_RESET);
7257 }
7258 }
7259exit:
7260 dtmprintk(ioc,
7261 printk(MYIOC_s_DEBUG_FMT
7262 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7263 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7264 "SUCCESS" : "FAILED")));
7265
7266 return rc;
7267}
7268
7269#ifdef CONFIG_FUSION_LOGGING
7270static void
7271mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7272{
7273 char *ds = NULL;
7274 u32 evData0;
7275 int ii;
7276 u8 event;
7277 char *evStr = ioc->evStr;
7278
7279 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7280 evData0 = le32_to_cpu(pEventReply->Data[0]);
7281
7282 switch(event) {
7283 case MPI_EVENT_NONE:
7284 ds = "None";
7285 break;
7286 case MPI_EVENT_LOG_DATA:
7287 ds = "Log Data";
7288 break;
7289 case MPI_EVENT_STATE_CHANGE:
7290 ds = "State Change";
7291 break;
7292 case MPI_EVENT_UNIT_ATTENTION:
7293 ds = "Unit Attention";
7294 break;
7295 case MPI_EVENT_IOC_BUS_RESET:
7296 ds = "IOC Bus Reset";
7297 break;
7298 case MPI_EVENT_EXT_BUS_RESET:
7299 ds = "External Bus Reset";
7300 break;
7301 case MPI_EVENT_RESCAN:
7302 ds = "Bus Rescan Event";
7303 break;
7304 case MPI_EVENT_LINK_STATUS_CHANGE:
7305 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7306 ds = "Link Status(FAILURE) Change";
7307 else
7308 ds = "Link Status(ACTIVE) Change";
7309 break;
7310 case MPI_EVENT_LOOP_STATE_CHANGE:
7311 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7312 ds = "Loop State(LIP) Change";
7313 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7314 ds = "Loop State(LPE) Change";
7315 else
7316 ds = "Loop State(LPB) Change";
7317 break;
7318 case MPI_EVENT_LOGOUT:
7319 ds = "Logout";
7320 break;
7321 case MPI_EVENT_EVENT_CHANGE:
7322 if (evData0)
7323 ds = "Events ON";
7324 else
7325 ds = "Events OFF";
7326 break;
7327 case MPI_EVENT_INTEGRATED_RAID:
7328 {
7329 u8 ReasonCode = (u8)(evData0 >> 16);
7330 switch (ReasonCode) {
7331 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7332 ds = "Integrated Raid: Volume Created";
7333 break;
7334 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7335 ds = "Integrated Raid: Volume Deleted";
7336 break;
7337 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7338 ds = "Integrated Raid: Volume Settings Changed";
7339 break;
7340 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7341 ds = "Integrated Raid: Volume Status Changed";
7342 break;
7343 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7344 ds = "Integrated Raid: Volume Physdisk Changed";
7345 break;
7346 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7347 ds = "Integrated Raid: Physdisk Created";
7348 break;
7349 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7350 ds = "Integrated Raid: Physdisk Deleted";
7351 break;
7352 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7353 ds = "Integrated Raid: Physdisk Settings Changed";
7354 break;
7355 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7356 ds = "Integrated Raid: Physdisk Status Changed";
7357 break;
7358 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7359 ds = "Integrated Raid: Domain Validation Needed";
7360 break;
7361 case MPI_EVENT_RAID_RC_SMART_DATA :
7362 ds = "Integrated Raid; Smart Data";
7363 break;
7364 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7365 ds = "Integrated Raid: Replace Action Started";
7366 break;
7367 default:
7368 ds = "Integrated Raid";
7369 break;
7370 }
7371 break;
7372 }
7373 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7374 ds = "SCSI Device Status Change";
7375 break;
7376 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7377 {
7378 u8 id = (u8)(evData0);
7379 u8 channel = (u8)(evData0 >> 8);
7380 u8 ReasonCode = (u8)(evData0 >> 16);
7381 switch (ReasonCode) {
7382 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7383 snprintf(evStr, EVENT_DESCR_STR_SZ,
7384 "SAS Device Status Change: Added: "
7385 "id=%d channel=%d", id, channel);
7386 break;
7387 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7388 snprintf(evStr, EVENT_DESCR_STR_SZ,
7389 "SAS Device Status Change: Deleted: "
7390 "id=%d channel=%d", id, channel);
7391 break;
7392 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7393 snprintf(evStr, EVENT_DESCR_STR_SZ,
7394 "SAS Device Status Change: SMART Data: "
7395 "id=%d channel=%d", id, channel);
7396 break;
7397 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7398 snprintf(evStr, EVENT_DESCR_STR_SZ,
7399 "SAS Device Status Change: No Persistancy: "
7400 "id=%d channel=%d", id, channel);
7401 break;
7402 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7403 snprintf(evStr, EVENT_DESCR_STR_SZ,
7404 "SAS Device Status Change: Unsupported Device "
7405 "Discovered : id=%d channel=%d", id, channel);
7406 break;
7407 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7408 snprintf(evStr, EVENT_DESCR_STR_SZ,
7409 "SAS Device Status Change: Internal Device "
7410 "Reset : id=%d channel=%d", id, channel);
7411 break;
7412 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7413 snprintf(evStr, EVENT_DESCR_STR_SZ,
7414 "SAS Device Status Change: Internal Task "
7415 "Abort : id=%d channel=%d", id, channel);
7416 break;
7417 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7418 snprintf(evStr, EVENT_DESCR_STR_SZ,
7419 "SAS Device Status Change: Internal Abort "
7420 "Task Set : id=%d channel=%d", id, channel);
7421 break;
7422 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7423 snprintf(evStr, EVENT_DESCR_STR_SZ,
7424 "SAS Device Status Change: Internal Clear "
7425 "Task Set : id=%d channel=%d", id, channel);
7426 break;
7427 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7428 snprintf(evStr, EVENT_DESCR_STR_SZ,
7429 "SAS Device Status Change: Internal Query "
7430 "Task : id=%d channel=%d", id, channel);
7431 break;
7432 default:
7433 snprintf(evStr, EVENT_DESCR_STR_SZ,
7434 "SAS Device Status Change: Unknown: "
7435 "id=%d channel=%d", id, channel);
7436 break;
7437 }
7438 break;
7439 }
7440 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7441 ds = "Bus Timer Expired";
7442 break;
7443 case MPI_EVENT_QUEUE_FULL:
7444 {
7445 u16 curr_depth = (u16)(evData0 >> 16);
7446 u8 channel = (u8)(evData0 >> 8);
7447 u8 id = (u8)(evData0);
7448
7449 snprintf(evStr, EVENT_DESCR_STR_SZ,
7450 "Queue Full: channel=%d id=%d depth=%d",
7451 channel, id, curr_depth);
7452 break;
7453 }
7454 case MPI_EVENT_SAS_SES:
7455 ds = "SAS SES Event";
7456 break;
7457 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7458 ds = "Persistent Table Full";
7459 break;
7460 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7461 {
7462 u8 LinkRates = (u8)(evData0 >> 8);
7463 u8 PhyNumber = (u8)(evData0);
7464 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7465 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7466 switch (LinkRates) {
7467 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7468 snprintf(evStr, EVENT_DESCR_STR_SZ,
7469 "SAS PHY Link Status: Phy=%d:"
7470 " Rate Unknown",PhyNumber);
7471 break;
7472 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7473 snprintf(evStr, EVENT_DESCR_STR_SZ,
7474 "SAS PHY Link Status: Phy=%d:"
7475 " Phy Disabled",PhyNumber);
7476 break;
7477 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7478 snprintf(evStr, EVENT_DESCR_STR_SZ,
7479 "SAS PHY Link Status: Phy=%d:"
7480 " Failed Speed Nego",PhyNumber);
7481 break;
7482 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7483 snprintf(evStr, EVENT_DESCR_STR_SZ,
7484 "SAS PHY Link Status: Phy=%d:"
7485 " Sata OOB Completed",PhyNumber);
7486 break;
7487 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7488 snprintf(evStr, EVENT_DESCR_STR_SZ,
7489 "SAS PHY Link Status: Phy=%d:"
7490 " Rate 1.5 Gbps",PhyNumber);
7491 break;
7492 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7493 snprintf(evStr, EVENT_DESCR_STR_SZ,
7494 "SAS PHY Link Status: Phy=%d:"
7495 " Rate 3.0 Gbps", PhyNumber);
7496 break;
7497 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7498 snprintf(evStr, EVENT_DESCR_STR_SZ,
7499 "SAS PHY Link Status: Phy=%d:"
7500 " Rate 6.0 Gbps", PhyNumber);
7501 break;
7502 default:
7503 snprintf(evStr, EVENT_DESCR_STR_SZ,
7504 "SAS PHY Link Status: Phy=%d", PhyNumber);
7505 break;
7506 }
7507 break;
7508 }
7509 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7510 ds = "SAS Discovery Error";
7511 break;
7512 case MPI_EVENT_IR_RESYNC_UPDATE:
7513 {
7514 u8 resync_complete = (u8)(evData0 >> 16);
7515 snprintf(evStr, EVENT_DESCR_STR_SZ,
7516 "IR Resync Update: Complete = %d:",resync_complete);
7517 break;
7518 }
7519 case MPI_EVENT_IR2:
7520 {
7521 u8 id = (u8)(evData0);
7522 u8 channel = (u8)(evData0 >> 8);
7523 u8 phys_num = (u8)(evData0 >> 24);
7524 u8 ReasonCode = (u8)(evData0 >> 16);
7525
7526 switch (ReasonCode) {
7527 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7528 snprintf(evStr, EVENT_DESCR_STR_SZ,
7529 "IR2: LD State Changed: "
7530 "id=%d channel=%d phys_num=%d",
7531 id, channel, phys_num);
7532 break;
7533 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7534 snprintf(evStr, EVENT_DESCR_STR_SZ,
7535 "IR2: PD State Changed "
7536 "id=%d channel=%d phys_num=%d",
7537 id, channel, phys_num);
7538 break;
7539 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7540 snprintf(evStr, EVENT_DESCR_STR_SZ,
7541 "IR2: Bad Block Table Full: "
7542 "id=%d channel=%d phys_num=%d",
7543 id, channel, phys_num);
7544 break;
7545 case MPI_EVENT_IR2_RC_PD_INSERTED:
7546 snprintf(evStr, EVENT_DESCR_STR_SZ,
7547 "IR2: PD Inserted: "
7548 "id=%d channel=%d phys_num=%d",
7549 id, channel, phys_num);
7550 break;
7551 case MPI_EVENT_IR2_RC_PD_REMOVED:
7552 snprintf(evStr, EVENT_DESCR_STR_SZ,
7553 "IR2: PD Removed: "
7554 "id=%d channel=%d phys_num=%d",
7555 id, channel, phys_num);
7556 break;
7557 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7558 snprintf(evStr, EVENT_DESCR_STR_SZ,
7559 "IR2: Foreign CFG Detected: "
7560 "id=%d channel=%d phys_num=%d",
7561 id, channel, phys_num);
7562 break;
7563 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7564 snprintf(evStr, EVENT_DESCR_STR_SZ,
7565 "IR2: Rebuild Medium Error: "
7566 "id=%d channel=%d phys_num=%d",
7567 id, channel, phys_num);
7568 break;
7569 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7570 snprintf(evStr, EVENT_DESCR_STR_SZ,
7571 "IR2: Dual Port Added: "
7572 "id=%d channel=%d phys_num=%d",
7573 id, channel, phys_num);
7574 break;
7575 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7576 snprintf(evStr, EVENT_DESCR_STR_SZ,
7577 "IR2: Dual Port Removed: "
7578 "id=%d channel=%d phys_num=%d",
7579 id, channel, phys_num);
7580 break;
7581 default:
7582 ds = "IR2";
7583 break;
7584 }
7585 break;
7586 }
7587 case MPI_EVENT_SAS_DISCOVERY:
7588 {
7589 if (evData0)
7590 ds = "SAS Discovery: Start";
7591 else
7592 ds = "SAS Discovery: Stop";
7593 break;
7594 }
7595 case MPI_EVENT_LOG_ENTRY_ADDED:
7596 ds = "SAS Log Entry Added";
7597 break;
7598
7599 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7600 {
7601 u8 phy_num = (u8)(evData0);
7602 u8 port_num = (u8)(evData0 >> 8);
7603 u8 port_width = (u8)(evData0 >> 16);
7604 u8 primative = (u8)(evData0 >> 24);
7605 snprintf(evStr, EVENT_DESCR_STR_SZ,
7606 "SAS Broadcase Primative: phy=%d port=%d "
7607 "width=%d primative=0x%02x",
7608 phy_num, port_num, port_width, primative);
7609 break;
7610 }
7611
7612 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7613 {
7614 u8 reason = (u8)(evData0);
7615
7616 switch (reason) {
7617 case MPI_EVENT_SAS_INIT_RC_ADDED:
7618 ds = "SAS Initiator Status Change: Added";
7619 break;
7620 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7621 ds = "SAS Initiator Status Change: Deleted";
7622 break;
7623 default:
7624 ds = "SAS Initiator Status Change";
7625 break;
7626 }
7627 break;
7628 }
7629
7630 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7631 {
7632 u8 max_init = (u8)(evData0);
7633 u8 current_init = (u8)(evData0 >> 8);
7634
7635 snprintf(evStr, EVENT_DESCR_STR_SZ,
7636 "SAS Initiator Device Table Overflow: max initiators=%02d "
7637 "current initators=%02d",
7638 max_init, current_init);
7639 break;
7640 }
7641 case MPI_EVENT_SAS_SMP_ERROR:
7642 {
7643 u8 status = (u8)(evData0);
7644 u8 port_num = (u8)(evData0 >> 8);
7645 u8 result = (u8)(evData0 >> 16);
7646
7647 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7648 snprintf(evStr, EVENT_DESCR_STR_SZ,
7649 "SAS SMP Error: port=%d result=0x%02x",
7650 port_num, result);
7651 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7652 snprintf(evStr, EVENT_DESCR_STR_SZ,
7653 "SAS SMP Error: port=%d : CRC Error",
7654 port_num);
7655 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7656 snprintf(evStr, EVENT_DESCR_STR_SZ,
7657 "SAS SMP Error: port=%d : Timeout",
7658 port_num);
7659 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7660 snprintf(evStr, EVENT_DESCR_STR_SZ,
7661 "SAS SMP Error: port=%d : No Destination",
7662 port_num);
7663 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7664 snprintf(evStr, EVENT_DESCR_STR_SZ,
7665 "SAS SMP Error: port=%d : Bad Destination",
7666 port_num);
7667 else
7668 snprintf(evStr, EVENT_DESCR_STR_SZ,
7669 "SAS SMP Error: port=%d : status=0x%02x",
7670 port_num, status);
7671 break;
7672 }
7673
7674 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7675 {
7676 u8 reason = (u8)(evData0);
7677
7678 switch (reason) {
7679 case MPI_EVENT_SAS_EXP_RC_ADDED:
7680 ds = "Expander Status Change: Added";
7681 break;
7682 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7683 ds = "Expander Status Change: Deleted";
7684 break;
7685 default:
7686 ds = "Expander Status Change";
7687 break;
7688 }
7689 break;
7690 }
7691
7692 /*
7693 * MPT base "custom" events may be added here...
7694 */
7695 default:
7696 ds = "Unknown";
7697 break;
7698 }
7699 if (ds)
7700 strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
7701
7702
7703 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7704 "MPT event:(%02Xh) : %s\n",
7705 ioc->name, event, evStr));
7706
7707 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7708 ": Event data:\n"));
7709 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7710 devtverboseprintk(ioc, printk(" %08x",
7711 le32_to_cpu(pEventReply->Data[ii])));
7712 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7713}
7714#endif
7715/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7716/**
7717 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7718 * @ioc: Pointer to MPT_ADAPTER structure
7719 * @pEventReply: Pointer to EventNotification reply frame
7720 * @evHandlers: Pointer to integer, number of event handlers
7721 *
7722 * Routes a received EventNotificationReply to all currently registered
7723 * event handlers.
7724 * Returns sum of event handlers return values.
7725 */
7726static int
7727ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7728{
7729 u16 evDataLen;
7730 u32 evData0 = 0;
7731 int ii;
7732 u8 cb_idx;
7733 int r = 0;
7734 int handlers = 0;
7735 u8 event;
7736
7737 /*
7738 * Do platform normalization of values
7739 */
7740 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7741 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7742 if (evDataLen) {
7743 evData0 = le32_to_cpu(pEventReply->Data[0]);
7744 }
7745
7746#ifdef CONFIG_FUSION_LOGGING
7747 if (evDataLen)
7748 mpt_display_event_info(ioc, pEventReply);
7749#endif
7750
7751 /*
7752 * Do general / base driver event processing
7753 */
7754 switch(event) {
7755 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7756 if (evDataLen) {
7757 u8 evState = evData0 & 0xFF;
7758
7759 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7760
7761 /* Update EventState field in cached IocFacts */
7762 if (ioc->facts.Function) {
7763 ioc->facts.EventState = evState;
7764 }
7765 }
7766 break;
7767 case MPI_EVENT_INTEGRATED_RAID:
7768 mptbase_raid_process_event_data(ioc,
7769 (MpiEventDataRaid_t *)pEventReply->Data);
7770 break;
7771 default:
7772 break;
7773 }
7774
7775 /*
7776 * Should this event be logged? Events are written sequentially.
7777 * When buffer is full, start again at the top.
7778 */
7779 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7780 int idx;
7781
7782 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7783
7784 ioc->events[idx].event = event;
7785 ioc->events[idx].eventContext = ioc->eventContext;
7786
7787 for (ii = 0; ii < 2; ii++) {
7788 if (ii < evDataLen)
7789 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7790 else
7791 ioc->events[idx].data[ii] = 0;
7792 }
7793
7794 ioc->eventContext++;
7795 }
7796
7797
7798 /*
7799 * Call each currently registered protocol event handler.
7800 */
7801 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7802 if (MptEvHandlers[cb_idx]) {
7803 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7804 "Routing Event to event handler #%d\n",
7805 ioc->name, cb_idx));
7806 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7807 handlers++;
7808 }
7809 }
7810 /* FIXME? Examine results here? */
7811
7812 /*
7813 * If needed, send (a single) EventAck.
7814 */
7815 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7816 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7817 "EventAck required\n",ioc->name));
7818 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7819 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7820 ioc->name, ii));
7821 }
7822 }
7823
7824 *evHandlers = handlers;
7825 return r;
7826}
7827
7828/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7829/**
7830 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7831 * @ioc: Pointer to MPT_ADAPTER structure
7832 * @log_info: U32 LogInfo reply word from the IOC
7833 *
7834 * Refer to lsi/mpi_log_fc.h.
7835 */
7836static void
7837mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7838{
7839 char *desc = "unknown";
7840
7841 switch (log_info & 0xFF000000) {
7842 case MPI_IOCLOGINFO_FC_INIT_BASE:
7843 desc = "FCP Initiator";
7844 break;
7845 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7846 desc = "FCP Target";
7847 break;
7848 case MPI_IOCLOGINFO_FC_LAN_BASE:
7849 desc = "LAN";
7850 break;
7851 case MPI_IOCLOGINFO_FC_MSG_BASE:
7852 desc = "MPI Message Layer";
7853 break;
7854 case MPI_IOCLOGINFO_FC_LINK_BASE:
7855 desc = "FC Link";
7856 break;
7857 case MPI_IOCLOGINFO_FC_CTX_BASE:
7858 desc = "Context Manager";
7859 break;
7860 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7861 desc = "Invalid Field Offset";
7862 break;
7863 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7864 desc = "State Change Info";
7865 break;
7866 }
7867
7868 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7869 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7870}
7871
7872/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7873/**
7874 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7875 * @ioc: Pointer to MPT_ADAPTER structure
7876 * @log_info: U32 LogInfo word from the IOC
7877 *
7878 * Refer to lsi/sp_log.h.
7879 */
7880static void
7881mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7882{
7883 u32 info = log_info & 0x00FF0000;
7884 char *desc = "unknown";
7885
7886 switch (info) {
7887 case 0x00010000:
7888 desc = "bug! MID not found";
7889 break;
7890
7891 case 0x00020000:
7892 desc = "Parity Error";
7893 break;
7894
7895 case 0x00030000:
7896 desc = "ASYNC Outbound Overrun";
7897 break;
7898
7899 case 0x00040000:
7900 desc = "SYNC Offset Error";
7901 break;
7902
7903 case 0x00050000:
7904 desc = "BM Change";
7905 break;
7906
7907 case 0x00060000:
7908 desc = "Msg In Overflow";
7909 break;
7910
7911 case 0x00070000:
7912 desc = "DMA Error";
7913 break;
7914
7915 case 0x00080000:
7916 desc = "Outbound DMA Overrun";
7917 break;
7918
7919 case 0x00090000:
7920 desc = "Task Management";
7921 break;
7922
7923 case 0x000A0000:
7924 desc = "Device Problem";
7925 break;
7926
7927 case 0x000B0000:
7928 desc = "Invalid Phase Change";
7929 break;
7930
7931 case 0x000C0000:
7932 desc = "Untagged Table Size";
7933 break;
7934
7935 }
7936
7937 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7938}
7939
7940/* strings for sas loginfo */
7941 static char *originator_str[] = {
7942 "IOP", /* 00h */
7943 "PL", /* 01h */
7944 "IR" /* 02h */
7945 };
7946 static char *iop_code_str[] = {
7947 NULL, /* 00h */
7948 "Invalid SAS Address", /* 01h */
7949 NULL, /* 02h */
7950 "Invalid Page", /* 03h */
7951 "Diag Message Error", /* 04h */
7952 "Task Terminated", /* 05h */
7953 "Enclosure Management", /* 06h */
7954 "Target Mode" /* 07h */
7955 };
7956 static char *pl_code_str[] = {
7957 NULL, /* 00h */
7958 "Open Failure", /* 01h */
7959 "Invalid Scatter Gather List", /* 02h */
7960 "Wrong Relative Offset or Frame Length", /* 03h */
7961 "Frame Transfer Error", /* 04h */
7962 "Transmit Frame Connected Low", /* 05h */
7963 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7964 "SATA Read Log Receive Data Error", /* 07h */
7965 "SATA NCQ Fail All Commands After Error", /* 08h */
7966 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7967 "Receive Frame Invalid Message", /* 0Ah */
7968 "Receive Context Message Valid Error", /* 0Bh */
7969 "Receive Frame Current Frame Error", /* 0Ch */
7970 "SATA Link Down", /* 0Dh */
7971 "Discovery SATA Init W IOS", /* 0Eh */
7972 "Config Invalid Page", /* 0Fh */
7973 "Discovery SATA Init Timeout", /* 10h */
7974 "Reset", /* 11h */
7975 "Abort", /* 12h */
7976 "IO Not Yet Executed", /* 13h */
7977 "IO Executed", /* 14h */
7978 "Persistent Reservation Out Not Affiliation "
7979 "Owner", /* 15h */
7980 "Open Transmit DMA Abort", /* 16h */
7981 "IO Device Missing Delay Retry", /* 17h */
7982 "IO Cancelled Due to Receive Error", /* 18h */
7983 NULL, /* 19h */
7984 NULL, /* 1Ah */
7985 NULL, /* 1Bh */
7986 NULL, /* 1Ch */
7987 NULL, /* 1Dh */
7988 NULL, /* 1Eh */
7989 NULL, /* 1Fh */
7990 "Enclosure Management" /* 20h */
7991 };
7992 static char *ir_code_str[] = {
7993 "Raid Action Error", /* 00h */
7994 NULL, /* 00h */
7995 NULL, /* 01h */
7996 NULL, /* 02h */
7997 NULL, /* 03h */
7998 NULL, /* 04h */
7999 NULL, /* 05h */
8000 NULL, /* 06h */
8001 NULL /* 07h */
8002 };
8003 static char *raid_sub_code_str[] = {
8004 NULL, /* 00h */
8005 "Volume Creation Failed: Data Passed too "
8006 "Large", /* 01h */
8007 "Volume Creation Failed: Duplicate Volumes "
8008 "Attempted", /* 02h */
8009 "Volume Creation Failed: Max Number "
8010 "Supported Volumes Exceeded", /* 03h */
8011 "Volume Creation Failed: DMA Error", /* 04h */
8012 "Volume Creation Failed: Invalid Volume Type", /* 05h */
8013 "Volume Creation Failed: Error Reading "
8014 "MFG Page 4", /* 06h */
8015 "Volume Creation Failed: Creating Internal "
8016 "Structures", /* 07h */
8017 NULL, /* 08h */
8018 NULL, /* 09h */
8019 NULL, /* 0Ah */
8020 NULL, /* 0Bh */
8021 NULL, /* 0Ch */
8022 NULL, /* 0Dh */
8023 NULL, /* 0Eh */
8024 NULL, /* 0Fh */
8025 "Activation failed: Already Active Volume", /* 10h */
8026 "Activation failed: Unsupported Volume Type", /* 11h */
8027 "Activation failed: Too Many Active Volumes", /* 12h */
8028 "Activation failed: Volume ID in Use", /* 13h */
8029 "Activation failed: Reported Failure", /* 14h */
8030 "Activation failed: Importing a Volume", /* 15h */
8031 NULL, /* 16h */
8032 NULL, /* 17h */
8033 NULL, /* 18h */
8034 NULL, /* 19h */
8035 NULL, /* 1Ah */
8036 NULL, /* 1Bh */
8037 NULL, /* 1Ch */
8038 NULL, /* 1Dh */
8039 NULL, /* 1Eh */
8040 NULL, /* 1Fh */
8041 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8042 "Phys Disk failed: Data Passed too Large", /* 21h */
8043 "Phys Disk failed: DMA Error", /* 22h */
8044 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8045 "Phys Disk failed: Creating Phys Disk Config "
8046 "Page", /* 24h */
8047 NULL, /* 25h */
8048 NULL, /* 26h */
8049 NULL, /* 27h */
8050 NULL, /* 28h */
8051 NULL, /* 29h */
8052 NULL, /* 2Ah */
8053 NULL, /* 2Bh */
8054 NULL, /* 2Ch */
8055 NULL, /* 2Dh */
8056 NULL, /* 2Eh */
8057 NULL, /* 2Fh */
8058 "Compatibility Error: IR Disabled", /* 30h */
8059 "Compatibility Error: Inquiry Command Failed", /* 31h */
8060 "Compatibility Error: Device not Direct Access "
8061 "Device ", /* 32h */
8062 "Compatibility Error: Removable Device Found", /* 33h */
8063 "Compatibility Error: Device SCSI Version not "
8064 "2 or Higher", /* 34h */
8065 "Compatibility Error: SATA Device, 48 BIT LBA "
8066 "not Supported", /* 35h */
8067 "Compatibility Error: Device doesn't have "
8068 "512 Byte Block Sizes", /* 36h */
8069 "Compatibility Error: Volume Type Check Failed", /* 37h */
8070 "Compatibility Error: Volume Type is "
8071 "Unsupported by FW", /* 38h */
8072 "Compatibility Error: Disk Drive too Small for "
8073 "use in Volume", /* 39h */
8074 "Compatibility Error: Phys Disk for Create "
8075 "Volume not Found", /* 3Ah */
8076 "Compatibility Error: Too Many or too Few "
8077 "Disks for Volume Type", /* 3Bh */
8078 "Compatibility Error: Disk stripe Sizes "
8079 "Must be 64KB", /* 3Ch */
8080 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8081 };
8082
8083/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8084/**
8085 * mpt_sas_log_info - Log information returned from SAS IOC.
8086 * @ioc: Pointer to MPT_ADAPTER structure
8087 * @log_info: U32 LogInfo reply word from the IOC
8088 * @cb_idx: callback function's handle
8089 *
8090 * Refer to lsi/mpi_log_sas.h.
8091 **/
8092static void
8093mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8094{
8095union loginfo_type {
8096 u32 loginfo;
8097 struct {
8098 u32 subcode:16;
8099 u32 code:8;
8100 u32 originator:4;
8101 u32 bus_type:4;
8102 }dw;
8103};
8104 union loginfo_type sas_loginfo;
8105 char *originator_desc = NULL;
8106 char *code_desc = NULL;
8107 char *sub_code_desc = NULL;
8108
8109 sas_loginfo.loginfo = log_info;
8110 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8111 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8112 return;
8113
8114 originator_desc = originator_str[sas_loginfo.dw.originator];
8115
8116 switch (sas_loginfo.dw.originator) {
8117
8118 case 0: /* IOP */
8119 if (sas_loginfo.dw.code <
8120 ARRAY_SIZE(iop_code_str))
8121 code_desc = iop_code_str[sas_loginfo.dw.code];
8122 break;
8123 case 1: /* PL */
8124 if (sas_loginfo.dw.code <
8125 ARRAY_SIZE(pl_code_str))
8126 code_desc = pl_code_str[sas_loginfo.dw.code];
8127 break;
8128 case 2: /* IR */
8129 if (sas_loginfo.dw.code >=
8130 ARRAY_SIZE(ir_code_str))
8131 break;
8132 code_desc = ir_code_str[sas_loginfo.dw.code];
8133 if (sas_loginfo.dw.subcode >=
8134 ARRAY_SIZE(raid_sub_code_str))
8135 break;
8136 if (sas_loginfo.dw.code == 0)
8137 sub_code_desc =
8138 raid_sub_code_str[sas_loginfo.dw.subcode];
8139 break;
8140 default:
8141 return;
8142 }
8143
8144 if (sub_code_desc != NULL)
8145 printk(MYIOC_s_INFO_FMT
8146 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8147 " SubCode={%s} cb_idx %s\n",
8148 ioc->name, log_info, originator_desc, code_desc,
8149 sub_code_desc, MptCallbacksName[cb_idx]);
8150 else if (code_desc != NULL)
8151 printk(MYIOC_s_INFO_FMT
8152 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8153 " SubCode(0x%04x) cb_idx %s\n",
8154 ioc->name, log_info, originator_desc, code_desc,
8155 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8156 else
8157 printk(MYIOC_s_INFO_FMT
8158 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8159 " SubCode(0x%04x) cb_idx %s\n",
8160 ioc->name, log_info, originator_desc,
8161 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8162 MptCallbacksName[cb_idx]);
8163}
8164
8165/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8166/**
8167 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8168 * @ioc: Pointer to MPT_ADAPTER structure
8169 * @ioc_status: U32 IOCStatus word from IOC
8170 * @mf: Pointer to MPT request frame
8171 *
8172 * Refer to lsi/mpi.h.
8173 **/
8174static void
8175mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8176{
8177 Config_t *pReq = (Config_t *)mf;
8178 char extend_desc[EVENT_DESCR_STR_SZ];
8179 char *desc = NULL;
8180 u32 form;
8181 u8 page_type;
8182
8183 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8184 page_type = pReq->ExtPageType;
8185 else
8186 page_type = pReq->Header.PageType;
8187
8188 /*
8189 * ignore invalid page messages for GET_NEXT_HANDLE
8190 */
8191 form = le32_to_cpu(pReq->PageAddress);
8192 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8193 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8194 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8195 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8196 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8197 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8198 return;
8199 }
8200 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8201 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8202 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8203 return;
8204 }
8205
8206 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8207 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8208 page_type, pReq->Header.PageNumber, pReq->Action, form);
8209
8210 switch (ioc_status) {
8211
8212 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8213 desc = "Config Page Invalid Action";
8214 break;
8215
8216 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8217 desc = "Config Page Invalid Type";
8218 break;
8219
8220 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8221 desc = "Config Page Invalid Page";
8222 break;
8223
8224 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8225 desc = "Config Page Invalid Data";
8226 break;
8227
8228 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8229 desc = "Config Page No Defaults";
8230 break;
8231
8232 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8233 desc = "Config Page Can't Commit";
8234 break;
8235 }
8236
8237 if (!desc)
8238 return;
8239
8240 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8241 ioc->name, ioc_status, desc, extend_desc));
8242}
8243
8244/**
8245 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8246 * @ioc: Pointer to MPT_ADAPTER structure
8247 * @ioc_status: U32 IOCStatus word from IOC
8248 * @mf: Pointer to MPT request frame
8249 *
8250 * Refer to lsi/mpi.h.
8251 **/
8252static void
8253mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8254{
8255 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8256 char *desc = NULL;
8257
8258 switch (status) {
8259
8260/****************************************************************************/
8261/* Common IOCStatus values for all replies */
8262/****************************************************************************/
8263
8264 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8265 desc = "Invalid Function";
8266 break;
8267
8268 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8269 desc = "Busy";
8270 break;
8271
8272 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8273 desc = "Invalid SGL";
8274 break;
8275
8276 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8277 desc = "Internal Error";
8278 break;
8279
8280 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8281 desc = "Reserved";
8282 break;
8283
8284 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8285 desc = "Insufficient Resources";
8286 break;
8287
8288 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8289 desc = "Invalid Field";
8290 break;
8291
8292 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8293 desc = "Invalid State";
8294 break;
8295
8296/****************************************************************************/
8297/* Config IOCStatus values */
8298/****************************************************************************/
8299
8300 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8301 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8302 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8303 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8304 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8305 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8306 mpt_iocstatus_info_config(ioc, status, mf);
8307 break;
8308
8309/****************************************************************************/
8310/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8311/* */
8312/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8313/* */
8314/****************************************************************************/
8315
8316 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8317 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8318 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8319 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8320 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8321 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8322 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8323 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8324 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8325 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8326 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8327 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8328 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8329 break;
8330
8331/****************************************************************************/
8332/* SCSI Target values */
8333/****************************************************************************/
8334
8335 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8336 desc = "Target: Priority IO";
8337 break;
8338
8339 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8340 desc = "Target: Invalid Port";
8341 break;
8342
8343 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8344 desc = "Target Invalid IO Index:";
8345 break;
8346
8347 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8348 desc = "Target: Aborted";
8349 break;
8350
8351 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8352 desc = "Target: No Conn Retryable";
8353 break;
8354
8355 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8356 desc = "Target: No Connection";
8357 break;
8358
8359 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8360 desc = "Target: Transfer Count Mismatch";
8361 break;
8362
8363 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8364 desc = "Target: STS Data not Sent";
8365 break;
8366
8367 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8368 desc = "Target: Data Offset Error";
8369 break;
8370
8371 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8372 desc = "Target: Too Much Write Data";
8373 break;
8374
8375 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8376 desc = "Target: IU Too Short";
8377 break;
8378
8379 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8380 desc = "Target: ACK NAK Timeout";
8381 break;
8382
8383 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8384 desc = "Target: Nak Received";
8385 break;
8386
8387/****************************************************************************/
8388/* Fibre Channel Direct Access values */
8389/****************************************************************************/
8390
8391 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8392 desc = "FC: Aborted";
8393 break;
8394
8395 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8396 desc = "FC: RX ID Invalid";
8397 break;
8398
8399 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8400 desc = "FC: DID Invalid";
8401 break;
8402
8403 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8404 desc = "FC: Node Logged Out";
8405 break;
8406
8407 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8408 desc = "FC: Exchange Canceled";
8409 break;
8410
8411/****************************************************************************/
8412/* LAN values */
8413/****************************************************************************/
8414
8415 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8416 desc = "LAN: Device not Found";
8417 break;
8418
8419 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8420 desc = "LAN: Device Failure";
8421 break;
8422
8423 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8424 desc = "LAN: Transmit Error";
8425 break;
8426
8427 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8428 desc = "LAN: Transmit Aborted";
8429 break;
8430
8431 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8432 desc = "LAN: Receive Error";
8433 break;
8434
8435 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8436 desc = "LAN: Receive Aborted";
8437 break;
8438
8439 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8440 desc = "LAN: Partial Packet";
8441 break;
8442
8443 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8444 desc = "LAN: Canceled";
8445 break;
8446
8447/****************************************************************************/
8448/* Serial Attached SCSI values */
8449/****************************************************************************/
8450
8451 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8452 desc = "SAS: SMP Request Failed";
8453 break;
8454
8455 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8456 desc = "SAS: SMP Data Overrun";
8457 break;
8458
8459 default:
8460 desc = "Others";
8461 break;
8462 }
8463
8464 if (!desc)
8465 return;
8466
8467 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8468 ioc->name, status, desc));
8469}
8470
8471/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8472EXPORT_SYMBOL(mpt_attach);
8473EXPORT_SYMBOL(mpt_detach);
8474#ifdef CONFIG_PM
8475EXPORT_SYMBOL(mpt_resume);
8476EXPORT_SYMBOL(mpt_suspend);
8477#endif
8478EXPORT_SYMBOL(ioc_list);
8479EXPORT_SYMBOL(mpt_register);
8480EXPORT_SYMBOL(mpt_deregister);
8481EXPORT_SYMBOL(mpt_event_register);
8482EXPORT_SYMBOL(mpt_event_deregister);
8483EXPORT_SYMBOL(mpt_reset_register);
8484EXPORT_SYMBOL(mpt_reset_deregister);
8485EXPORT_SYMBOL(mpt_device_driver_register);
8486EXPORT_SYMBOL(mpt_device_driver_deregister);
8487EXPORT_SYMBOL(mpt_get_msg_frame);
8488EXPORT_SYMBOL(mpt_put_msg_frame);
8489EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8490EXPORT_SYMBOL(mpt_free_msg_frame);
8491EXPORT_SYMBOL(mpt_send_handshake_request);
8492EXPORT_SYMBOL(mpt_verify_adapter);
8493EXPORT_SYMBOL(mpt_GetIocState);
8494EXPORT_SYMBOL(mpt_print_ioc_summary);
8495EXPORT_SYMBOL(mpt_HardResetHandler);
8496EXPORT_SYMBOL(mpt_config);
8497EXPORT_SYMBOL(mpt_findImVolumes);
8498EXPORT_SYMBOL(mpt_alloc_fw_memory);
8499EXPORT_SYMBOL(mpt_free_fw_memory);
8500EXPORT_SYMBOL(mptbase_sas_persist_operation);
8501EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8502
8503/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8504/**
8505 * fusion_init - Fusion MPT base driver initialization routine.
8506 *
8507 * Returns 0 for success, non-zero for failure.
8508 */
8509static int __init
8510fusion_init(void)
8511{
8512 u8 cb_idx;
8513
8514 show_mptmod_ver(my_NAME, my_VERSION);
8515 printk(KERN_INFO COPYRIGHT "\n");
8516
8517 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8518 MptCallbacks[cb_idx] = NULL;
8519 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8520 MptEvHandlers[cb_idx] = NULL;
8521 MptResetHandlers[cb_idx] = NULL;
8522 }
8523
8524 /* Register ourselves (mptbase) in order to facilitate
8525 * EventNotification handling.
8526 */
8527 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8528 "mptbase_reply");
8529
8530 /* Register for hard reset handling callbacks.
8531 */
8532 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8533
8534#ifdef CONFIG_PROC_FS
8535 (void) procmpt_create();
8536#endif
8537 return 0;
8538}
8539
8540/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8541/**
8542 * fusion_exit - Perform driver unload cleanup.
8543 *
8544 * This routine frees all resources associated with each MPT adapter
8545 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8546 */
8547static void __exit
8548fusion_exit(void)
8549{
8550
8551 mpt_reset_deregister(mpt_base_index);
8552
8553#ifdef CONFIG_PROC_FS
8554 procmpt_destroy();
8555#endif
8556}
8557
8558module_init(fusion_init);
8559module_exit(fusion_exit);