Loading...
1/*
2 * This header file contains public constants and structures used by
3 * the SCSI initiator code.
4 */
5#ifndef _SCSI_SCSI_H
6#define _SCSI_SCSI_H
7
8#include <linux/types.h>
9#include <linux/scatterlist.h>
10#include <linux/kernel.h>
11#include <scsi/scsi_common.h>
12#include <scsi/scsi_proto.h>
13
14struct scsi_cmnd;
15
16enum scsi_timeouts {
17 SCSI_DEFAULT_EH_TIMEOUT = 10 * HZ,
18};
19
20/*
21 * The maximum number of SG segments that we will put inside a
22 * scatterlist (unless chaining is used). Should ideally fit inside a
23 * single page, to avoid a higher order allocation. We could define this
24 * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order. The
25 * minimum value is 32
26 */
27#define SCSI_MAX_SG_SEGMENTS 128
28
29/*
30 * Like SCSI_MAX_SG_SEGMENTS, but for archs that have sg chaining. This limit
31 * is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
32 */
33#ifdef CONFIG_ARCH_HAS_SG_CHAIN
34#define SCSI_MAX_SG_CHAIN_SEGMENTS 2048
35#else
36#define SCSI_MAX_SG_CHAIN_SEGMENTS SCSI_MAX_SG_SEGMENTS
37#endif
38
39/*
40 * DIX-capable adapters effectively support infinite chaining for the
41 * protection information scatterlist
42 */
43#define SCSI_MAX_PROT_SG_SEGMENTS 0xFFFF
44
45/*
46 * Special value for scanning to specify scanning or rescanning of all
47 * possible channels, (target) ids, or luns on a given shost.
48 */
49#define SCAN_WILD_CARD ~0
50
51#ifdef CONFIG_ACPI
52struct acpi_bus_type;
53
54extern int
55scsi_register_acpi_bus_type(struct acpi_bus_type *bus);
56
57extern void
58scsi_unregister_acpi_bus_type(struct acpi_bus_type *bus);
59#endif
60
61/** scsi_status_is_good - check the status return.
62 *
63 * @status: the status passed up from the driver (including host and
64 * driver components)
65 *
66 * This returns true for known good conditions that may be treated as
67 * command completed normally
68 */
69static inline int scsi_status_is_good(int status)
70{
71 /*
72 * FIXME: bit0 is listed as reserved in SCSI-2, but is
73 * significant in SCSI-3. For now, we follow the SCSI-2
74 * behaviour and ignore reserved bits.
75 */
76 status &= 0xfe;
77 return ((status == SAM_STAT_GOOD) ||
78 (status == SAM_STAT_INTERMEDIATE) ||
79 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
80 /* FIXME: this is obsolete in SAM-3 */
81 (status == SAM_STAT_COMMAND_TERMINATED));
82}
83
84
85/*
86 * standard mode-select header prepended to all mode-select commands
87 */
88
89struct ccs_modesel_head {
90 __u8 _r1; /* reserved */
91 __u8 medium; /* device-specific medium type */
92 __u8 _r2; /* reserved */
93 __u8 block_desc_length; /* block descriptor length */
94 __u8 density; /* device-specific density code */
95 __u8 number_blocks_hi; /* number of blocks in this block desc */
96 __u8 number_blocks_med;
97 __u8 number_blocks_lo;
98 __u8 _r3;
99 __u8 block_length_hi; /* block length for blocks in this desc */
100 __u8 block_length_med;
101 __u8 block_length_lo;
102};
103
104/*
105 * The Well Known LUNS (SAM-3) in our int representation of a LUN
106 */
107#define SCSI_W_LUN_BASE 0xc100
108#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
109#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
110#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
111
112static inline int scsi_is_wlun(u64 lun)
113{
114 return (lun & 0xff00) == SCSI_W_LUN_BASE;
115}
116
117
118/*
119 * MESSAGE CODES
120 */
121
122#define COMMAND_COMPLETE 0x00
123#define EXTENDED_MESSAGE 0x01
124#define EXTENDED_MODIFY_DATA_POINTER 0x00
125#define EXTENDED_SDTR 0x01
126#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
127#define EXTENDED_WDTR 0x03
128#define EXTENDED_PPR 0x04
129#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05
130#define SAVE_POINTERS 0x02
131#define RESTORE_POINTERS 0x03
132#define DISCONNECT 0x04
133#define INITIATOR_ERROR 0x05
134#define ABORT_TASK_SET 0x06
135#define MESSAGE_REJECT 0x07
136#define NOP 0x08
137#define MSG_PARITY_ERROR 0x09
138#define LINKED_CMD_COMPLETE 0x0a
139#define LINKED_FLG_CMD_COMPLETE 0x0b
140#define TARGET_RESET 0x0c
141#define ABORT_TASK 0x0d
142#define CLEAR_TASK_SET 0x0e
143#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
144#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
145#define CLEAR_ACA 0x16
146#define LOGICAL_UNIT_RESET 0x17
147#define SIMPLE_QUEUE_TAG 0x20
148#define HEAD_OF_QUEUE_TAG 0x21
149#define ORDERED_QUEUE_TAG 0x22
150#define IGNORE_WIDE_RESIDUE 0x23
151#define ACA 0x24
152#define QAS_REQUEST 0x55
153
154/* Old SCSI2 names, don't use in new code */
155#define BUS_DEVICE_RESET TARGET_RESET
156#define ABORT ABORT_TASK_SET
157
158/*
159 * Host byte codes
160 */
161
162#define DID_OK 0x00 /* NO error */
163#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */
164#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */
165#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */
166#define DID_BAD_TARGET 0x04 /* BAD target. */
167#define DID_ABORT 0x05 /* Told to abort for some other reason */
168#define DID_PARITY 0x06 /* Parity error */
169#define DID_ERROR 0x07 /* Internal error */
170#define DID_RESET 0x08 /* Reset by somebody. */
171#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */
172#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */
173#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */
174#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */
175#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also
176 * without decrementing the retry count */
177#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
178 * and the driver blocked the port to
179 * recover the link. Transport class will
180 * retry or fail IO */
181#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */
182#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on
183 * other paths */
184#define DID_NEXUS_FAILURE 0x11 /* Permanent nexus failure, retry on other
185 * paths might yield different results */
186#define DID_ALLOC_FAILURE 0x12 /* Space allocation on the device failed */
187#define DID_MEDIUM_ERROR 0x13 /* Medium error */
188#define DRIVER_OK 0x00 /* Driver status */
189
190/*
191 * These indicate the error that occurred, and what is available.
192 */
193
194#define DRIVER_BUSY 0x01
195#define DRIVER_SOFT 0x02
196#define DRIVER_MEDIA 0x03
197#define DRIVER_ERROR 0x04
198
199#define DRIVER_INVALID 0x05
200#define DRIVER_TIMEOUT 0x06
201#define DRIVER_HARD 0x07
202#define DRIVER_SENSE 0x08
203
204/*
205 * Internal return values.
206 */
207
208#define NEEDS_RETRY 0x2001
209#define SUCCESS 0x2002
210#define FAILED 0x2003
211#define QUEUED 0x2004
212#define SOFT_ERROR 0x2005
213#define ADD_TO_MLQUEUE 0x2006
214#define TIMEOUT_ERROR 0x2007
215#define SCSI_RETURN_NOT_HANDLED 0x2008
216#define FAST_IO_FAIL 0x2009
217
218/*
219 * Midlevel queue return values.
220 */
221#define SCSI_MLQUEUE_HOST_BUSY 0x1055
222#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
223#define SCSI_MLQUEUE_EH_RETRY 0x1057
224#define SCSI_MLQUEUE_TARGET_BUSY 0x1058
225
226/*
227 * Use these to separate status msg and our bytes
228 *
229 * These are set by:
230 *
231 * status byte = set from target device
232 * msg_byte = return status from host adapter itself.
233 * host_byte = set by low-level driver to indicate status.
234 * driver_byte = set by mid-level.
235 */
236#define status_byte(result) (((result) >> 1) & 0x7f)
237#define msg_byte(result) (((result) >> 8) & 0xff)
238#define host_byte(result) (((result) >> 16) & 0xff)
239#define driver_byte(result) (((result) >> 24) & 0xff)
240
241#define sense_class(sense) (((sense) >> 4) & 0x7)
242#define sense_error(sense) ((sense) & 0xf)
243#define sense_valid(sense) ((sense) & 0x80)
244
245/*
246 * default timeouts
247*/
248#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ)
249#define START_STOP_TIMEOUT (60 * HZ)
250#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ)
251#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ)
252#define READ_DEFECT_DATA_TIMEOUT (60 * HZ )
253
254
255#define IDENTIFY_BASE 0x80
256#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\
257 ((can_disconnect) ? 0x40 : 0) |\
258 ((lun) & 0x07))
259
260/*
261 * struct scsi_device::scsi_level values. For SCSI devices other than those
262 * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
263 * where "resp" is a byte array of the response to an INQUIRY. The scsi_level
264 * variable is visible to the user via sysfs.
265 */
266
267#define SCSI_UNKNOWN 0
268#define SCSI_1 1
269#define SCSI_1_CCS 2
270#define SCSI_2 3
271#define SCSI_3 4 /* SPC */
272#define SCSI_SPC_2 5
273#define SCSI_SPC_3 6
274
275/*
276 * INQ PERIPHERAL QUALIFIERS
277 */
278#define SCSI_INQ_PQ_CON 0x00
279#define SCSI_INQ_PQ_NOT_CON 0x01
280#define SCSI_INQ_PQ_NOT_CAP 0x03
281
282
283/*
284 * Here are some scsi specific ioctl commands which are sometimes useful.
285 *
286 * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
287 */
288
289/* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */
290#define SCSI_IOCTL_GET_IDLUN 0x5382
291
292/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
293
294/* Used to obtain the host number of a device. */
295#define SCSI_IOCTL_PROBE_HOST 0x5385
296
297/* Used to obtain the bus number for a device */
298#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
299
300/* Used to obtain the PCI location of a device */
301#define SCSI_IOCTL_GET_PCI 0x5387
302
303/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
304static inline __u32 scsi_to_u32(__u8 *ptr)
305{
306 return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
307}
308
309#endif /* _SCSI_SCSI_H */
1/*
2 * This header file contains public constants and structures used by
3 * the SCSI initiator code.
4 */
5#ifndef _SCSI_SCSI_H
6#define _SCSI_SCSI_H
7
8#include <linux/types.h>
9#include <linux/scatterlist.h>
10#include <linux/kernel.h>
11#include <scsi/scsi_common.h>
12#include <scsi/scsi_proto.h>
13
14struct scsi_cmnd;
15
16enum scsi_timeouts {
17 SCSI_DEFAULT_EH_TIMEOUT = 10 * HZ,
18};
19
20/*
21 * DIX-capable adapters effectively support infinite chaining for the
22 * protection information scatterlist
23 */
24#define SCSI_MAX_PROT_SG_SEGMENTS 0xFFFF
25
26/*
27 * Special value for scanning to specify scanning or rescanning of all
28 * possible channels, (target) ids, or luns on a given shost.
29 */
30#define SCAN_WILD_CARD ~0
31
32#ifdef CONFIG_ACPI
33struct acpi_bus_type;
34
35extern int
36scsi_register_acpi_bus_type(struct acpi_bus_type *bus);
37
38extern void
39scsi_unregister_acpi_bus_type(struct acpi_bus_type *bus);
40#endif
41
42/** scsi_status_is_good - check the status return.
43 *
44 * @status: the status passed up from the driver (including host and
45 * driver components)
46 *
47 * This returns true for known good conditions that may be treated as
48 * command completed normally
49 */
50static inline int scsi_status_is_good(int status)
51{
52 /*
53 * FIXME: bit0 is listed as reserved in SCSI-2, but is
54 * significant in SCSI-3. For now, we follow the SCSI-2
55 * behaviour and ignore reserved bits.
56 */
57 status &= 0xfe;
58 return ((status == SAM_STAT_GOOD) ||
59 (status == SAM_STAT_INTERMEDIATE) ||
60 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
61 /* FIXME: this is obsolete in SAM-3 */
62 (status == SAM_STAT_COMMAND_TERMINATED));
63}
64
65
66/*
67 * standard mode-select header prepended to all mode-select commands
68 */
69
70struct ccs_modesel_head {
71 __u8 _r1; /* reserved */
72 __u8 medium; /* device-specific medium type */
73 __u8 _r2; /* reserved */
74 __u8 block_desc_length; /* block descriptor length */
75 __u8 density; /* device-specific density code */
76 __u8 number_blocks_hi; /* number of blocks in this block desc */
77 __u8 number_blocks_med;
78 __u8 number_blocks_lo;
79 __u8 _r3;
80 __u8 block_length_hi; /* block length for blocks in this desc */
81 __u8 block_length_med;
82 __u8 block_length_lo;
83};
84
85/*
86 * The Well Known LUNS (SAM-3) in our int representation of a LUN
87 */
88#define SCSI_W_LUN_BASE 0xc100
89#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
90#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
91#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
92
93static inline int scsi_is_wlun(u64 lun)
94{
95 return (lun & 0xff00) == SCSI_W_LUN_BASE;
96}
97
98
99/*
100 * MESSAGE CODES
101 */
102
103#define COMMAND_COMPLETE 0x00
104#define EXTENDED_MESSAGE 0x01
105#define EXTENDED_MODIFY_DATA_POINTER 0x00
106#define EXTENDED_SDTR 0x01
107#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
108#define EXTENDED_WDTR 0x03
109#define EXTENDED_PPR 0x04
110#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05
111#define SAVE_POINTERS 0x02
112#define RESTORE_POINTERS 0x03
113#define DISCONNECT 0x04
114#define INITIATOR_ERROR 0x05
115#define ABORT_TASK_SET 0x06
116#define MESSAGE_REJECT 0x07
117#define NOP 0x08
118#define MSG_PARITY_ERROR 0x09
119#define LINKED_CMD_COMPLETE 0x0a
120#define LINKED_FLG_CMD_COMPLETE 0x0b
121#define TARGET_RESET 0x0c
122#define ABORT_TASK 0x0d
123#define CLEAR_TASK_SET 0x0e
124#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
125#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
126#define CLEAR_ACA 0x16
127#define LOGICAL_UNIT_RESET 0x17
128#define SIMPLE_QUEUE_TAG 0x20
129#define HEAD_OF_QUEUE_TAG 0x21
130#define ORDERED_QUEUE_TAG 0x22
131#define IGNORE_WIDE_RESIDUE 0x23
132#define ACA 0x24
133#define QAS_REQUEST 0x55
134
135/* Old SCSI2 names, don't use in new code */
136#define BUS_DEVICE_RESET TARGET_RESET
137#define ABORT ABORT_TASK_SET
138
139/*
140 * Host byte codes
141 */
142
143#define DID_OK 0x00 /* NO error */
144#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */
145#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */
146#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */
147#define DID_BAD_TARGET 0x04 /* BAD target. */
148#define DID_ABORT 0x05 /* Told to abort for some other reason */
149#define DID_PARITY 0x06 /* Parity error */
150#define DID_ERROR 0x07 /* Internal error */
151#define DID_RESET 0x08 /* Reset by somebody. */
152#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */
153#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */
154#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */
155#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */
156#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also
157 * without decrementing the retry count */
158#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
159 * and the driver blocked the port to
160 * recover the link. Transport class will
161 * retry or fail IO */
162#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */
163#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on
164 * other paths */
165#define DID_NEXUS_FAILURE 0x11 /* Permanent nexus failure, retry on other
166 * paths might yield different results */
167#define DID_ALLOC_FAILURE 0x12 /* Space allocation on the device failed */
168#define DID_MEDIUM_ERROR 0x13 /* Medium error */
169#define DRIVER_OK 0x00 /* Driver status */
170
171/*
172 * These indicate the error that occurred, and what is available.
173 */
174
175#define DRIVER_BUSY 0x01
176#define DRIVER_SOFT 0x02
177#define DRIVER_MEDIA 0x03
178#define DRIVER_ERROR 0x04
179
180#define DRIVER_INVALID 0x05
181#define DRIVER_TIMEOUT 0x06
182#define DRIVER_HARD 0x07
183#define DRIVER_SENSE 0x08
184
185/*
186 * Internal return values.
187 */
188
189#define NEEDS_RETRY 0x2001
190#define SUCCESS 0x2002
191#define FAILED 0x2003
192#define QUEUED 0x2004
193#define SOFT_ERROR 0x2005
194#define ADD_TO_MLQUEUE 0x2006
195#define TIMEOUT_ERROR 0x2007
196#define SCSI_RETURN_NOT_HANDLED 0x2008
197#define FAST_IO_FAIL 0x2009
198
199/*
200 * Midlevel queue return values.
201 */
202#define SCSI_MLQUEUE_HOST_BUSY 0x1055
203#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
204#define SCSI_MLQUEUE_EH_RETRY 0x1057
205#define SCSI_MLQUEUE_TARGET_BUSY 0x1058
206
207/*
208 * Use these to separate status msg and our bytes
209 *
210 * These are set by:
211 *
212 * status byte = set from target device
213 * msg_byte = return status from host adapter itself.
214 * host_byte = set by low-level driver to indicate status.
215 * driver_byte = set by mid-level.
216 */
217#define status_byte(result) (((result) >> 1) & 0x7f)
218#define msg_byte(result) (((result) >> 8) & 0xff)
219#define host_byte(result) (((result) >> 16) & 0xff)
220#define driver_byte(result) (((result) >> 24) & 0xff)
221
222#define sense_class(sense) (((sense) >> 4) & 0x7)
223#define sense_error(sense) ((sense) & 0xf)
224#define sense_valid(sense) ((sense) & 0x80)
225
226/*
227 * default timeouts
228*/
229#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ)
230#define START_STOP_TIMEOUT (60 * HZ)
231#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ)
232#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ)
233#define READ_DEFECT_DATA_TIMEOUT (60 * HZ )
234
235
236#define IDENTIFY_BASE 0x80
237#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\
238 ((can_disconnect) ? 0x40 : 0) |\
239 ((lun) & 0x07))
240
241/*
242 * struct scsi_device::scsi_level values. For SCSI devices other than those
243 * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
244 * where "resp" is a byte array of the response to an INQUIRY. The scsi_level
245 * variable is visible to the user via sysfs.
246 */
247
248#define SCSI_UNKNOWN 0
249#define SCSI_1 1
250#define SCSI_1_CCS 2
251#define SCSI_2 3
252#define SCSI_3 4 /* SPC */
253#define SCSI_SPC_2 5
254#define SCSI_SPC_3 6
255
256/*
257 * INQ PERIPHERAL QUALIFIERS
258 */
259#define SCSI_INQ_PQ_CON 0x00
260#define SCSI_INQ_PQ_NOT_CON 0x01
261#define SCSI_INQ_PQ_NOT_CAP 0x03
262
263
264/*
265 * Here are some scsi specific ioctl commands which are sometimes useful.
266 *
267 * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
268 */
269
270/* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */
271#define SCSI_IOCTL_GET_IDLUN 0x5382
272
273/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
274
275/* Used to obtain the host number of a device. */
276#define SCSI_IOCTL_PROBE_HOST 0x5385
277
278/* Used to obtain the bus number for a device */
279#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
280
281/* Used to obtain the PCI location of a device */
282#define SCSI_IOCTL_GET_PCI 0x5387
283
284/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
285static inline __u32 scsi_to_u32(__u8 *ptr)
286{
287 return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
288}
289
290#endif /* _SCSI_SCSI_H */