Loading...
1/*
2 * Copyright (c) 2001-2002 by David Brownell
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19#ifndef __LINUX_EHCI_HCD_H
20#define __LINUX_EHCI_HCD_H
21
22/* definitions used for the EHCI driver */
23
24/*
25 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
26 * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
27 * the host controller implementation.
28 *
29 * To facilitate the strongest possible byte-order checking from "sparse"
30 * and so on, we use __leXX unless that's not practical.
31 */
32#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
33typedef __u32 __bitwise __hc32;
34typedef __u16 __bitwise __hc16;
35#else
36#define __hc32 __le32
37#define __hc16 __le16
38#endif
39
40/* statistics can be kept for tuning/monitoring */
41#ifdef CONFIG_DYNAMIC_DEBUG
42#define EHCI_STATS
43#endif
44
45struct ehci_stats {
46 /* irq usage */
47 unsigned long normal;
48 unsigned long error;
49 unsigned long iaa;
50 unsigned long lost_iaa;
51
52 /* termination of urbs from core */
53 unsigned long complete;
54 unsigned long unlink;
55};
56
57/*
58 * Scheduling and budgeting information for periodic transfers, for both
59 * high-speed devices and full/low-speed devices lying behind a TT.
60 */
61struct ehci_per_sched {
62 struct usb_device *udev; /* access to the TT */
63 struct usb_host_endpoint *ep;
64 struct list_head ps_list; /* node on ehci_tt's ps_list */
65 u16 tt_usecs; /* time on the FS/LS bus */
66 u16 cs_mask; /* C-mask and S-mask bytes */
67 u16 period; /* actual period in frames */
68 u16 phase; /* actual phase, frame part */
69 u8 bw_phase; /* same, for bandwidth
70 reservation */
71 u8 phase_uf; /* uframe part of the phase */
72 u8 usecs, c_usecs; /* times on the HS bus */
73 u8 bw_uperiod; /* period in microframes, for
74 bandwidth reservation */
75 u8 bw_period; /* same, in frames */
76};
77#define NO_FRAME 29999 /* frame not assigned yet */
78
79/* ehci_hcd->lock guards shared data against other CPUs:
80 * ehci_hcd: async, unlink, periodic (and shadow), ...
81 * usb_host_endpoint: hcpriv
82 * ehci_qh: qh_next, qtd_list
83 * ehci_qtd: qtd_list
84 *
85 * Also, hold this lock when talking to HC registers or
86 * when updating hw_* fields in shared qh/qtd/... structures.
87 */
88
89#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */
90
91/*
92 * ehci_rh_state values of EHCI_RH_RUNNING or above mean that the
93 * controller may be doing DMA. Lower values mean there's no DMA.
94 */
95enum ehci_rh_state {
96 EHCI_RH_HALTED,
97 EHCI_RH_SUSPENDED,
98 EHCI_RH_RUNNING,
99 EHCI_RH_STOPPING
100};
101
102/*
103 * Timer events, ordered by increasing delay length.
104 * Always update event_delays_ns[] and event_handlers[] (defined in
105 * ehci-timer.c) in parallel with this list.
106 */
107enum ehci_hrtimer_event {
108 EHCI_HRTIMER_POLL_ASS, /* Poll for async schedule off */
109 EHCI_HRTIMER_POLL_PSS, /* Poll for periodic schedule off */
110 EHCI_HRTIMER_POLL_DEAD, /* Wait for dead controller to stop */
111 EHCI_HRTIMER_UNLINK_INTR, /* Wait for interrupt QH unlink */
112 EHCI_HRTIMER_FREE_ITDS, /* Wait for unused iTDs and siTDs */
113 EHCI_HRTIMER_ACTIVE_UNLINK, /* Wait while unlinking an active QH */
114 EHCI_HRTIMER_START_UNLINK_INTR, /* Unlink empty interrupt QHs */
115 EHCI_HRTIMER_ASYNC_UNLINKS, /* Unlink empty async QHs */
116 EHCI_HRTIMER_IAA_WATCHDOG, /* Handle lost IAA interrupts */
117 EHCI_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
118 EHCI_HRTIMER_DISABLE_ASYNC, /* Wait to disable async sched */
119 EHCI_HRTIMER_IO_WATCHDOG, /* Check for missing IRQs */
120 EHCI_HRTIMER_NUM_EVENTS /* Must come last */
121};
122#define EHCI_HRTIMER_NO_EVENT 99
123
124struct ehci_hcd { /* one per controller */
125 /* timing support */
126 enum ehci_hrtimer_event next_hrtimer_event;
127 unsigned enabled_hrtimer_events;
128 ktime_t hr_timeouts[EHCI_HRTIMER_NUM_EVENTS];
129 struct hrtimer hrtimer;
130
131 int PSS_poll_count;
132 int ASS_poll_count;
133 int died_poll_count;
134
135 /* glue to PCI and HCD framework */
136 struct ehci_caps __iomem *caps;
137 struct ehci_regs __iomem *regs;
138 struct ehci_dbg_port __iomem *debug;
139
140 __u32 hcs_params; /* cached register copy */
141 spinlock_t lock;
142 enum ehci_rh_state rh_state;
143
144 /* general schedule support */
145 bool scanning:1;
146 bool need_rescan:1;
147 bool intr_unlinking:1;
148 bool iaa_in_progress:1;
149 bool async_unlinking:1;
150 bool shutdown:1;
151 struct ehci_qh *qh_scan_next;
152
153 /* async schedule support */
154 struct ehci_qh *async;
155 struct ehci_qh *dummy; /* For AMD quirk use */
156 struct list_head async_unlink;
157 struct list_head async_idle;
158 unsigned async_unlink_cycle;
159 unsigned async_count; /* async activity count */
160 __hc32 old_current; /* Test for QH becoming */
161 __hc32 old_token; /* inactive during unlink */
162
163 /* periodic schedule support */
164#define DEFAULT_I_TDPS 1024 /* some HCs can do less */
165 unsigned periodic_size;
166 __hc32 *periodic; /* hw periodic table */
167 dma_addr_t periodic_dma;
168 struct list_head intr_qh_list;
169 unsigned i_thresh; /* uframes HC might cache */
170
171 union ehci_shadow *pshadow; /* mirror hw periodic table */
172 struct list_head intr_unlink_wait;
173 struct list_head intr_unlink;
174 unsigned intr_unlink_wait_cycle;
175 unsigned intr_unlink_cycle;
176 unsigned now_frame; /* frame from HC hardware */
177 unsigned last_iso_frame; /* last frame scanned for iso */
178 unsigned intr_count; /* intr activity count */
179 unsigned isoc_count; /* isoc activity count */
180 unsigned periodic_count; /* periodic activity count */
181 unsigned uframe_periodic_max; /* max periodic time per uframe */
182
183
184 /* list of itds & sitds completed while now_frame was still active */
185 struct list_head cached_itd_list;
186 struct ehci_itd *last_itd_to_free;
187 struct list_head cached_sitd_list;
188 struct ehci_sitd *last_sitd_to_free;
189
190 /* per root hub port */
191 unsigned long reset_done[EHCI_MAX_ROOT_PORTS];
192
193 /* bit vectors (one bit per port) */
194 unsigned long bus_suspended; /* which ports were
195 already suspended at the start of a bus suspend */
196 unsigned long companion_ports; /* which ports are
197 dedicated to the companion controller */
198 unsigned long owned_ports; /* which ports are
199 owned by the companion during a bus suspend */
200 unsigned long port_c_suspend; /* which ports have
201 the change-suspend feature turned on */
202 unsigned long suspended_ports; /* which ports are
203 suspended */
204 unsigned long resuming_ports; /* which ports have
205 started to resume */
206
207 /* per-HC memory pools (could be per-bus, but ...) */
208 struct dma_pool *qh_pool; /* qh per active urb */
209 struct dma_pool *qtd_pool; /* one or more per qh */
210 struct dma_pool *itd_pool; /* itd per iso urb */
211 struct dma_pool *sitd_pool; /* sitd per split iso urb */
212
213 unsigned random_frame;
214 unsigned long next_statechange;
215 ktime_t last_periodic_enable;
216 u32 command;
217
218 /* SILICON QUIRKS */
219 unsigned no_selective_suspend:1;
220 unsigned has_fsl_port_bug:1; /* FreeScale */
221 unsigned has_fsl_hs_errata:1; /* Freescale HS quirk */
222 unsigned big_endian_mmio:1;
223 unsigned big_endian_desc:1;
224 unsigned big_endian_capbase:1;
225 unsigned has_amcc_usb23:1;
226 unsigned need_io_watchdog:1;
227 unsigned amd_pll_fix:1;
228 unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
229 unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
230 unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
231 unsigned need_oc_pp_cycle:1; /* MPC834X port power */
232 unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
233
234 /* required for usb32 quirk */
235 #define OHCI_CTRL_HCFS (3 << 6)
236 #define OHCI_USB_OPER (2 << 6)
237 #define OHCI_USB_SUSPEND (3 << 6)
238
239 #define OHCI_HCCTRL_OFFSET 0x4
240 #define OHCI_HCCTRL_LEN 0x4
241 __hc32 *ohci_hcctrl_reg;
242 unsigned has_hostpc:1;
243 unsigned has_tdi_phy_lpm:1;
244 unsigned has_ppcd:1; /* support per-port change bits */
245 u8 sbrn; /* packed release number */
246
247 /* irq statistics */
248#ifdef EHCI_STATS
249 struct ehci_stats stats;
250# define COUNT(x) ((x)++)
251#else
252# define COUNT(x)
253#endif
254
255 /* debug files */
256#ifdef CONFIG_DYNAMIC_DEBUG
257 struct dentry *debug_dir;
258#endif
259
260 /* bandwidth usage */
261#define EHCI_BANDWIDTH_SIZE 64
262#define EHCI_BANDWIDTH_FRAMES (EHCI_BANDWIDTH_SIZE >> 3)
263 u8 bandwidth[EHCI_BANDWIDTH_SIZE];
264 /* us allocated per uframe */
265 u8 tt_budget[EHCI_BANDWIDTH_SIZE];
266 /* us budgeted per uframe */
267 struct list_head tt_list;
268
269 /* platform-specific data -- must come last */
270 unsigned long priv[0] __aligned(sizeof(s64));
271};
272
273/* convert between an HCD pointer and the corresponding EHCI_HCD */
274static inline struct ehci_hcd *hcd_to_ehci(struct usb_hcd *hcd)
275{
276 return (struct ehci_hcd *) (hcd->hcd_priv);
277}
278static inline struct usb_hcd *ehci_to_hcd(struct ehci_hcd *ehci)
279{
280 return container_of((void *) ehci, struct usb_hcd, hcd_priv);
281}
282
283/*-------------------------------------------------------------------------*/
284
285#include <linux/usb/ehci_def.h>
286
287/*-------------------------------------------------------------------------*/
288
289#define QTD_NEXT(ehci, dma) cpu_to_hc32(ehci, (u32)dma)
290
291/*
292 * EHCI Specification 0.95 Section 3.5
293 * QTD: describe data transfer components (buffer, direction, ...)
294 * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
295 *
296 * These are associated only with "QH" (Queue Head) structures,
297 * used with control, bulk, and interrupt transfers.
298 */
299struct ehci_qtd {
300 /* first part defined by EHCI spec */
301 __hc32 hw_next; /* see EHCI 3.5.1 */
302 __hc32 hw_alt_next; /* see EHCI 3.5.2 */
303 __hc32 hw_token; /* see EHCI 3.5.3 */
304#define QTD_TOGGLE (1 << 31) /* data toggle */
305#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
306#define QTD_IOC (1 << 15) /* interrupt on complete */
307#define QTD_CERR(tok) (((tok)>>10) & 0x3)
308#define QTD_PID(tok) (((tok)>>8) & 0x3)
309#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
310#define QTD_STS_HALT (1 << 6) /* halted on error */
311#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
312#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
313#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
314#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
315#define QTD_STS_STS (1 << 1) /* split transaction state */
316#define QTD_STS_PING (1 << 0) /* issue PING? */
317
318#define ACTIVE_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_ACTIVE)
319#define HALT_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_HALT)
320#define STATUS_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_STS)
321
322 __hc32 hw_buf[5]; /* see EHCI 3.5.4 */
323 __hc32 hw_buf_hi[5]; /* Appendix B */
324
325 /* the rest is HCD-private */
326 dma_addr_t qtd_dma; /* qtd address */
327 struct list_head qtd_list; /* sw qtd list */
328 struct urb *urb; /* qtd's urb */
329 size_t length; /* length of buffer */
330} __aligned(32);
331
332/* mask NakCnt+T in qh->hw_alt_next */
333#define QTD_MASK(ehci) cpu_to_hc32(ehci, ~0x1f)
334
335#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
336
337/*-------------------------------------------------------------------------*/
338
339/* type tag from {qh,itd,sitd,fstn}->hw_next */
340#define Q_NEXT_TYPE(ehci, dma) ((dma) & cpu_to_hc32(ehci, 3 << 1))
341
342/*
343 * Now the following defines are not converted using the
344 * cpu_to_le32() macro anymore, since we have to support
345 * "dynamic" switching between be and le support, so that the driver
346 * can be used on one system with SoC EHCI controller using big-endian
347 * descriptors as well as a normal little-endian PCI EHCI controller.
348 */
349/* values for that type tag */
350#define Q_TYPE_ITD (0 << 1)
351#define Q_TYPE_QH (1 << 1)
352#define Q_TYPE_SITD (2 << 1)
353#define Q_TYPE_FSTN (3 << 1)
354
355/* next async queue entry, or pointer to interrupt/periodic QH */
356#define QH_NEXT(ehci, dma) \
357 (cpu_to_hc32(ehci, (((u32) dma) & ~0x01f) | Q_TYPE_QH))
358
359/* for periodic/async schedules and qtd lists, mark end of list */
360#define EHCI_LIST_END(ehci) cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
361
362/*
363 * Entries in periodic shadow table are pointers to one of four kinds
364 * of data structure. That's dictated by the hardware; a type tag is
365 * encoded in the low bits of the hardware's periodic schedule. Use
366 * Q_NEXT_TYPE to get the tag.
367 *
368 * For entries in the async schedule, the type tag always says "qh".
369 */
370union ehci_shadow {
371 struct ehci_qh *qh; /* Q_TYPE_QH */
372 struct ehci_itd *itd; /* Q_TYPE_ITD */
373 struct ehci_sitd *sitd; /* Q_TYPE_SITD */
374 struct ehci_fstn *fstn; /* Q_TYPE_FSTN */
375 __hc32 *hw_next; /* (all types) */
376 void *ptr;
377};
378
379/*-------------------------------------------------------------------------*/
380
381/*
382 * EHCI Specification 0.95 Section 3.6
383 * QH: describes control/bulk/interrupt endpoints
384 * See Fig 3-7 "Queue Head Structure Layout".
385 *
386 * These appear in both the async and (for interrupt) periodic schedules.
387 */
388
389/* first part defined by EHCI spec */
390struct ehci_qh_hw {
391 __hc32 hw_next; /* see EHCI 3.6.1 */
392 __hc32 hw_info1; /* see EHCI 3.6.2 */
393#define QH_CONTROL_EP (1 << 27) /* FS/LS control endpoint */
394#define QH_HEAD (1 << 15) /* Head of async reclamation list */
395#define QH_TOGGLE_CTL (1 << 14) /* Data toggle control */
396#define QH_HIGH_SPEED (2 << 12) /* Endpoint speed */
397#define QH_LOW_SPEED (1 << 12)
398#define QH_FULL_SPEED (0 << 12)
399#define QH_INACTIVATE (1 << 7) /* Inactivate on next transaction */
400 __hc32 hw_info2; /* see EHCI 3.6.2 */
401#define QH_SMASK 0x000000ff
402#define QH_CMASK 0x0000ff00
403#define QH_HUBADDR 0x007f0000
404#define QH_HUBPORT 0x3f800000
405#define QH_MULT 0xc0000000
406 __hc32 hw_current; /* qtd list - see EHCI 3.6.4 */
407
408 /* qtd overlay (hardware parts of a struct ehci_qtd) */
409 __hc32 hw_qtd_next;
410 __hc32 hw_alt_next;
411 __hc32 hw_token;
412 __hc32 hw_buf[5];
413 __hc32 hw_buf_hi[5];
414} __aligned(32);
415
416struct ehci_qh {
417 struct ehci_qh_hw *hw; /* Must come first */
418 /* the rest is HCD-private */
419 dma_addr_t qh_dma; /* address of qh */
420 union ehci_shadow qh_next; /* ptr to qh; or periodic */
421 struct list_head qtd_list; /* sw qtd list */
422 struct list_head intr_node; /* list of intr QHs */
423 struct ehci_qtd *dummy;
424 struct list_head unlink_node;
425 struct ehci_per_sched ps; /* scheduling info */
426
427 unsigned unlink_cycle;
428
429 u8 qh_state;
430#define QH_STATE_LINKED 1 /* HC sees this */
431#define QH_STATE_UNLINK 2 /* HC may still see this */
432#define QH_STATE_IDLE 3 /* HC doesn't see this */
433#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on unlink q */
434#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
435
436 u8 xacterrs; /* XactErr retry counter */
437#define QH_XACTERR_MAX 32 /* XactErr retry limit */
438
439 u8 unlink_reason;
440#define QH_UNLINK_HALTED 0x01 /* Halt flag is set */
441#define QH_UNLINK_SHORT_READ 0x02 /* Recover from a short read */
442#define QH_UNLINK_DUMMY_OVERLAY 0x04 /* QH overlayed the dummy TD */
443#define QH_UNLINK_SHUTDOWN 0x08 /* The HC isn't running */
444#define QH_UNLINK_QUEUE_EMPTY 0x10 /* Reached end of the queue */
445#define QH_UNLINK_REQUESTED 0x20 /* Disable, reset, or dequeue */
446
447 u8 gap_uf; /* uframes split/csplit gap */
448
449 unsigned is_out:1; /* bulk or intr OUT */
450 unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
451 unsigned dequeue_during_giveback:1;
452 unsigned should_be_inactive:1;
453};
454
455/*-------------------------------------------------------------------------*/
456
457/* description of one iso transaction (up to 3 KB data if highspeed) */
458struct ehci_iso_packet {
459 /* These will be copied to iTD when scheduling */
460 u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
461 __hc32 transaction; /* itd->hw_transaction[i] |= */
462 u8 cross; /* buf crosses pages */
463 /* for full speed OUT splits */
464 u32 buf1;
465};
466
467/* temporary schedule data for packets from iso urbs (both speeds)
468 * each packet is one logical usb transaction to the device (not TT),
469 * beginning at stream->next_uframe
470 */
471struct ehci_iso_sched {
472 struct list_head td_list;
473 unsigned span;
474 unsigned first_packet;
475 struct ehci_iso_packet packet[0];
476};
477
478/*
479 * ehci_iso_stream - groups all (s)itds for this endpoint.
480 * acts like a qh would, if EHCI had them for ISO.
481 */
482struct ehci_iso_stream {
483 /* first field matches ehci_hq, but is NULL */
484 struct ehci_qh_hw *hw;
485
486 u8 bEndpointAddress;
487 u8 highspeed;
488 struct list_head td_list; /* queued itds/sitds */
489 struct list_head free_list; /* list of unused itds/sitds */
490
491 /* output of (re)scheduling */
492 struct ehci_per_sched ps; /* scheduling info */
493 unsigned next_uframe;
494 __hc32 splits;
495
496 /* the rest is derived from the endpoint descriptor,
497 * including the extra info for hw_bufp[0..2]
498 */
499 u16 uperiod; /* period in uframes */
500 u16 maxp;
501 unsigned bandwidth;
502
503 /* This is used to initialize iTD's hw_bufp fields */
504 __hc32 buf0;
505 __hc32 buf1;
506 __hc32 buf2;
507
508 /* this is used to initialize sITD's tt info */
509 __hc32 address;
510};
511
512/*-------------------------------------------------------------------------*/
513
514/*
515 * EHCI Specification 0.95 Section 3.3
516 * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
517 *
518 * Schedule records for high speed iso xfers
519 */
520struct ehci_itd {
521 /* first part defined by EHCI spec */
522 __hc32 hw_next; /* see EHCI 3.3.1 */
523 __hc32 hw_transaction[8]; /* see EHCI 3.3.2 */
524#define EHCI_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
525#define EHCI_ISOC_BUF_ERR (1<<30) /* Data buffer error */
526#define EHCI_ISOC_BABBLE (1<<29) /* babble detected */
527#define EHCI_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
528#define EHCI_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
529#define EHCI_ITD_IOC (1 << 15) /* interrupt on complete */
530
531#define ITD_ACTIVE(ehci) cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
532
533 __hc32 hw_bufp[7]; /* see EHCI 3.3.3 */
534 __hc32 hw_bufp_hi[7]; /* Appendix B */
535
536 /* the rest is HCD-private */
537 dma_addr_t itd_dma; /* for this itd */
538 union ehci_shadow itd_next; /* ptr to periodic q entry */
539
540 struct urb *urb;
541 struct ehci_iso_stream *stream; /* endpoint's queue */
542 struct list_head itd_list; /* list of stream's itds */
543
544 /* any/all hw_transactions here may be used by that urb */
545 unsigned frame; /* where scheduled */
546 unsigned pg;
547 unsigned index[8]; /* in urb->iso_frame_desc */
548} __aligned(32);
549
550/*-------------------------------------------------------------------------*/
551
552/*
553 * EHCI Specification 0.95 Section 3.4
554 * siTD, aka split-transaction isochronous Transfer Descriptor
555 * ... describe full speed iso xfers through TT in hubs
556 * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
557 */
558struct ehci_sitd {
559 /* first part defined by EHCI spec */
560 __hc32 hw_next;
561/* uses bit field macros above - see EHCI 0.95 Table 3-8 */
562 __hc32 hw_fullspeed_ep; /* EHCI table 3-9 */
563 __hc32 hw_uframe; /* EHCI table 3-10 */
564 __hc32 hw_results; /* EHCI table 3-11 */
565#define SITD_IOC (1 << 31) /* interrupt on completion */
566#define SITD_PAGE (1 << 30) /* buffer 0/1 */
567#define SITD_LENGTH(x) (((x) >> 16) & 0x3ff)
568#define SITD_STS_ACTIVE (1 << 7) /* HC may execute this */
569#define SITD_STS_ERR (1 << 6) /* error from TT */
570#define SITD_STS_DBE (1 << 5) /* data buffer error (in HC) */
571#define SITD_STS_BABBLE (1 << 4) /* device was babbling */
572#define SITD_STS_XACT (1 << 3) /* illegal IN response */
573#define SITD_STS_MMF (1 << 2) /* incomplete split transaction */
574#define SITD_STS_STS (1 << 1) /* split transaction state */
575
576#define SITD_ACTIVE(ehci) cpu_to_hc32(ehci, SITD_STS_ACTIVE)
577
578 __hc32 hw_buf[2]; /* EHCI table 3-12 */
579 __hc32 hw_backpointer; /* EHCI table 3-13 */
580 __hc32 hw_buf_hi[2]; /* Appendix B */
581
582 /* the rest is HCD-private */
583 dma_addr_t sitd_dma;
584 union ehci_shadow sitd_next; /* ptr to periodic q entry */
585
586 struct urb *urb;
587 struct ehci_iso_stream *stream; /* endpoint's queue */
588 struct list_head sitd_list; /* list of stream's sitds */
589 unsigned frame;
590 unsigned index;
591} __aligned(32);
592
593/*-------------------------------------------------------------------------*/
594
595/*
596 * EHCI Specification 0.96 Section 3.7
597 * Periodic Frame Span Traversal Node (FSTN)
598 *
599 * Manages split interrupt transactions (using TT) that span frame boundaries
600 * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
601 * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
602 * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
603 */
604struct ehci_fstn {
605 __hc32 hw_next; /* any periodic q entry */
606 __hc32 hw_prev; /* qh or EHCI_LIST_END */
607
608 /* the rest is HCD-private */
609 dma_addr_t fstn_dma;
610 union ehci_shadow fstn_next; /* ptr to periodic q entry */
611} __aligned(32);
612
613/*-------------------------------------------------------------------------*/
614
615/*
616 * USB-2.0 Specification Sections 11.14 and 11.18
617 * Scheduling and budgeting split transactions using TTs
618 *
619 * A hub can have a single TT for all its ports, or multiple TTs (one for each
620 * port). The bandwidth and budgeting information for the full/low-speed bus
621 * below each TT is self-contained and independent of the other TTs or the
622 * high-speed bus.
623 *
624 * "Bandwidth" refers to the number of microseconds on the FS/LS bus allocated
625 * to an interrupt or isochronous endpoint for each frame. "Budget" refers to
626 * the best-case estimate of the number of full-speed bytes allocated to an
627 * endpoint for each microframe within an allocated frame.
628 *
629 * Removal of an endpoint invalidates a TT's budget. Instead of trying to
630 * keep an up-to-date record, we recompute the budget when it is needed.
631 */
632
633struct ehci_tt {
634 u16 bandwidth[EHCI_BANDWIDTH_FRAMES];
635
636 struct list_head tt_list; /* List of all ehci_tt's */
637 struct list_head ps_list; /* Items using this TT */
638 struct usb_tt *usb_tt;
639 int tt_port; /* TT port number */
640};
641
642/*-------------------------------------------------------------------------*/
643
644/* Prepare the PORTSC wakeup flags during controller suspend/resume */
645
646#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \
647 ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup)
648
649#define ehci_prepare_ports_for_controller_resume(ehci) \
650 ehci_adjust_port_wakeup_flags(ehci, false, false)
651
652/*-------------------------------------------------------------------------*/
653
654#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
655
656/*
657 * Some EHCI controllers have a Transaction Translator built into the
658 * root hub. This is a non-standard feature. Each controller will need
659 * to add code to the following inline functions, and call them as
660 * needed (mostly in root hub code).
661 */
662
663#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt)
664
665/* Returns the speed of a device attached to a port on the root hub. */
666static inline unsigned int
667ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
668{
669 if (ehci_is_TDI(ehci)) {
670 switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
671 case 0:
672 return 0;
673 case 1:
674 return USB_PORT_STAT_LOW_SPEED;
675 case 2:
676 default:
677 return USB_PORT_STAT_HIGH_SPEED;
678 }
679 }
680 return USB_PORT_STAT_HIGH_SPEED;
681}
682
683#else
684
685#define ehci_is_TDI(e) (0)
686
687#define ehci_port_speed(ehci, portsc) USB_PORT_STAT_HIGH_SPEED
688#endif
689
690/*-------------------------------------------------------------------------*/
691
692#ifdef CONFIG_PPC_83xx
693/* Some Freescale processors have an erratum in which the TT
694 * port number in the queue head was 0..N-1 instead of 1..N.
695 */
696#define ehci_has_fsl_portno_bug(e) ((e)->has_fsl_port_bug)
697#else
698#define ehci_has_fsl_portno_bug(e) (0)
699#endif
700
701#define PORTSC_FSL_PFSC 24 /* Port Force Full-Speed Connect */
702
703#if defined(CONFIG_PPC_85xx)
704/* Some Freescale processors have an erratum (USB A-005275) in which
705 * incoming packets get corrupted in HS mode
706 */
707#define ehci_has_fsl_hs_errata(e) ((e)->has_fsl_hs_errata)
708#else
709#define ehci_has_fsl_hs_errata(e) (0)
710#endif
711
712/*
713 * While most USB host controllers implement their registers in
714 * little-endian format, a minority (celleb companion chip) implement
715 * them in big endian format.
716 *
717 * This attempts to support either format at compile time without a
718 * runtime penalty, or both formats with the additional overhead
719 * of checking a flag bit.
720 *
721 * ehci_big_endian_capbase is a special quirk for controllers that
722 * implement the HC capability registers as separate registers and not
723 * as fields of a 32-bit register.
724 */
725
726#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
727#define ehci_big_endian_mmio(e) ((e)->big_endian_mmio)
728#define ehci_big_endian_capbase(e) ((e)->big_endian_capbase)
729#else
730#define ehci_big_endian_mmio(e) 0
731#define ehci_big_endian_capbase(e) 0
732#endif
733
734/*
735 * Big-endian read/write functions are arch-specific.
736 * Other arches can be added if/when they're needed.
737 */
738#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
739#define readl_be(addr) __raw_readl((__force unsigned *)addr)
740#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
741#endif
742
743static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
744 __u32 __iomem *regs)
745{
746#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
747 return ehci_big_endian_mmio(ehci) ?
748 readl_be(regs) :
749 readl(regs);
750#else
751 return readl(regs);
752#endif
753}
754
755#ifdef CONFIG_SOC_IMX28
756static inline void imx28_ehci_writel(const unsigned int val,
757 volatile __u32 __iomem *addr)
758{
759 __asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
760}
761#else
762static inline void imx28_ehci_writel(const unsigned int val,
763 volatile __u32 __iomem *addr)
764{
765}
766#endif
767static inline void ehci_writel(const struct ehci_hcd *ehci,
768 const unsigned int val, __u32 __iomem *regs)
769{
770#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
771 ehci_big_endian_mmio(ehci) ?
772 writel_be(val, regs) :
773 writel(val, regs);
774#else
775 if (ehci->imx28_write_fix)
776 imx28_ehci_writel(val, regs);
777 else
778 writel(val, regs);
779#endif
780}
781
782/*
783 * On certain ppc-44x SoC there is a HW issue, that could only worked around with
784 * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
785 * Other common bits are dependent on has_amcc_usb23 quirk flag.
786 */
787#ifdef CONFIG_44x
788static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
789{
790 u32 hc_control;
791
792 hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
793 if (operational)
794 hc_control |= OHCI_USB_OPER;
795 else
796 hc_control |= OHCI_USB_SUSPEND;
797
798 writel_be(hc_control, ehci->ohci_hcctrl_reg);
799 (void) readl_be(ehci->ohci_hcctrl_reg);
800}
801#else
802static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
803{ }
804#endif
805
806/*-------------------------------------------------------------------------*/
807
808/*
809 * The AMCC 440EPx not only implements its EHCI registers in big-endian
810 * format, but also its DMA data structures (descriptors).
811 *
812 * EHCI controllers accessed through PCI work normally (little-endian
813 * everywhere), so we won't bother supporting a BE-only mode for now.
814 */
815#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
816#define ehci_big_endian_desc(e) ((e)->big_endian_desc)
817
818/* cpu to ehci */
819static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x)
820{
821 return ehci_big_endian_desc(ehci)
822 ? (__force __hc32)cpu_to_be32(x)
823 : (__force __hc32)cpu_to_le32(x);
824}
825
826/* ehci to cpu */
827static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x)
828{
829 return ehci_big_endian_desc(ehci)
830 ? be32_to_cpu((__force __be32)x)
831 : le32_to_cpu((__force __le32)x);
832}
833
834static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x)
835{
836 return ehci_big_endian_desc(ehci)
837 ? be32_to_cpup((__force __be32 *)x)
838 : le32_to_cpup((__force __le32 *)x);
839}
840
841#else
842
843/* cpu to ehci */
844static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x)
845{
846 return cpu_to_le32(x);
847}
848
849/* ehci to cpu */
850static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x)
851{
852 return le32_to_cpu(x);
853}
854
855static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x)
856{
857 return le32_to_cpup(x);
858}
859
860#endif
861
862/*-------------------------------------------------------------------------*/
863
864#define ehci_dbg(ehci, fmt, args...) \
865 dev_dbg(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
866#define ehci_err(ehci, fmt, args...) \
867 dev_err(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
868#define ehci_info(ehci, fmt, args...) \
869 dev_info(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
870#define ehci_warn(ehci, fmt, args...) \
871 dev_warn(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
872
873/*-------------------------------------------------------------------------*/
874
875/* Declarations of things exported for use by ehci platform drivers */
876
877struct ehci_driver_overrides {
878 size_t extra_priv_size;
879 int (*reset)(struct usb_hcd *hcd);
880 int (*port_power)(struct usb_hcd *hcd,
881 int portnum, bool enable);
882};
883
884extern void ehci_init_driver(struct hc_driver *drv,
885 const struct ehci_driver_overrides *over);
886extern int ehci_setup(struct usb_hcd *hcd);
887extern int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
888 u32 mask, u32 done, int usec);
889extern int ehci_reset(struct ehci_hcd *ehci);
890
891extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);
892extern int ehci_resume(struct usb_hcd *hcd, bool force_reset);
893extern void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
894 bool suspending, bool do_wakeup);
895
896extern int ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
897 u16 wIndex, char *buf, u16 wLength);
898
899#endif /* __LINUX_EHCI_HCD_H */
1/*
2 * Copyright (c) 2001-2002 by David Brownell
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19#ifndef __LINUX_EHCI_HCD_H
20#define __LINUX_EHCI_HCD_H
21
22/* definitions used for the EHCI driver */
23
24/*
25 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
26 * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
27 * the host controller implementation.
28 *
29 * To facilitate the strongest possible byte-order checking from "sparse"
30 * and so on, we use __leXX unless that's not practical.
31 */
32#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
33typedef __u32 __bitwise __hc32;
34typedef __u16 __bitwise __hc16;
35#else
36#define __hc32 __le32
37#define __hc16 __le16
38#endif
39
40/* statistics can be kept for tuning/monitoring */
41#ifdef CONFIG_DYNAMIC_DEBUG
42#define EHCI_STATS
43#endif
44
45struct ehci_stats {
46 /* irq usage */
47 unsigned long normal;
48 unsigned long error;
49 unsigned long iaa;
50 unsigned long lost_iaa;
51
52 /* termination of urbs from core */
53 unsigned long complete;
54 unsigned long unlink;
55};
56
57/*
58 * Scheduling and budgeting information for periodic transfers, for both
59 * high-speed devices and full/low-speed devices lying behind a TT.
60 */
61struct ehci_per_sched {
62 struct usb_device *udev; /* access to the TT */
63 struct usb_host_endpoint *ep;
64 struct list_head ps_list; /* node on ehci_tt's ps_list */
65 u16 tt_usecs; /* time on the FS/LS bus */
66 u16 cs_mask; /* C-mask and S-mask bytes */
67 u16 period; /* actual period in frames */
68 u16 phase; /* actual phase, frame part */
69 u8 bw_phase; /* same, for bandwidth
70 reservation */
71 u8 phase_uf; /* uframe part of the phase */
72 u8 usecs, c_usecs; /* times on the HS bus */
73 u8 bw_uperiod; /* period in microframes, for
74 bandwidth reservation */
75 u8 bw_period; /* same, in frames */
76};
77#define NO_FRAME 29999 /* frame not assigned yet */
78
79/* ehci_hcd->lock guards shared data against other CPUs:
80 * ehci_hcd: async, unlink, periodic (and shadow), ...
81 * usb_host_endpoint: hcpriv
82 * ehci_qh: qh_next, qtd_list
83 * ehci_qtd: qtd_list
84 *
85 * Also, hold this lock when talking to HC registers or
86 * when updating hw_* fields in shared qh/qtd/... structures.
87 */
88
89#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */
90
91/*
92 * ehci_rh_state values of EHCI_RH_RUNNING or above mean that the
93 * controller may be doing DMA. Lower values mean there's no DMA.
94 */
95enum ehci_rh_state {
96 EHCI_RH_HALTED,
97 EHCI_RH_SUSPENDED,
98 EHCI_RH_RUNNING,
99 EHCI_RH_STOPPING
100};
101
102/*
103 * Timer events, ordered by increasing delay length.
104 * Always update event_delays_ns[] and event_handlers[] (defined in
105 * ehci-timer.c) in parallel with this list.
106 */
107enum ehci_hrtimer_event {
108 EHCI_HRTIMER_POLL_ASS, /* Poll for async schedule off */
109 EHCI_HRTIMER_POLL_PSS, /* Poll for periodic schedule off */
110 EHCI_HRTIMER_POLL_DEAD, /* Wait for dead controller to stop */
111 EHCI_HRTIMER_UNLINK_INTR, /* Wait for interrupt QH unlink */
112 EHCI_HRTIMER_FREE_ITDS, /* Wait for unused iTDs and siTDs */
113 EHCI_HRTIMER_ACTIVE_UNLINK, /* Wait while unlinking an active QH */
114 EHCI_HRTIMER_START_UNLINK_INTR, /* Unlink empty interrupt QHs */
115 EHCI_HRTIMER_ASYNC_UNLINKS, /* Unlink empty async QHs */
116 EHCI_HRTIMER_IAA_WATCHDOG, /* Handle lost IAA interrupts */
117 EHCI_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
118 EHCI_HRTIMER_DISABLE_ASYNC, /* Wait to disable async sched */
119 EHCI_HRTIMER_IO_WATCHDOG, /* Check for missing IRQs */
120 EHCI_HRTIMER_NUM_EVENTS /* Must come last */
121};
122#define EHCI_HRTIMER_NO_EVENT 99
123
124struct ehci_hcd { /* one per controller */
125 /* timing support */
126 enum ehci_hrtimer_event next_hrtimer_event;
127 unsigned enabled_hrtimer_events;
128 ktime_t hr_timeouts[EHCI_HRTIMER_NUM_EVENTS];
129 struct hrtimer hrtimer;
130
131 int PSS_poll_count;
132 int ASS_poll_count;
133 int died_poll_count;
134
135 /* glue to PCI and HCD framework */
136 struct ehci_caps __iomem *caps;
137 struct ehci_regs __iomem *regs;
138 struct ehci_dbg_port __iomem *debug;
139
140 __u32 hcs_params; /* cached register copy */
141 spinlock_t lock;
142 enum ehci_rh_state rh_state;
143
144 /* general schedule support */
145 bool scanning:1;
146 bool need_rescan:1;
147 bool intr_unlinking:1;
148 bool iaa_in_progress:1;
149 bool async_unlinking:1;
150 bool shutdown:1;
151 struct ehci_qh *qh_scan_next;
152
153 /* async schedule support */
154 struct ehci_qh *async;
155 struct ehci_qh *dummy; /* For AMD quirk use */
156 struct list_head async_unlink;
157 struct list_head async_idle;
158 unsigned async_unlink_cycle;
159 unsigned async_count; /* async activity count */
160 __hc32 old_current; /* Test for QH becoming */
161 __hc32 old_token; /* inactive during unlink */
162
163 /* periodic schedule support */
164#define DEFAULT_I_TDPS 1024 /* some HCs can do less */
165 unsigned periodic_size;
166 __hc32 *periodic; /* hw periodic table */
167 dma_addr_t periodic_dma;
168 struct list_head intr_qh_list;
169 unsigned i_thresh; /* uframes HC might cache */
170
171 union ehci_shadow *pshadow; /* mirror hw periodic table */
172 struct list_head intr_unlink_wait;
173 struct list_head intr_unlink;
174 unsigned intr_unlink_wait_cycle;
175 unsigned intr_unlink_cycle;
176 unsigned now_frame; /* frame from HC hardware */
177 unsigned last_iso_frame; /* last frame scanned for iso */
178 unsigned intr_count; /* intr activity count */
179 unsigned isoc_count; /* isoc activity count */
180 unsigned periodic_count; /* periodic activity count */
181 unsigned uframe_periodic_max; /* max periodic time per uframe */
182
183
184 /* list of itds & sitds completed while now_frame was still active */
185 struct list_head cached_itd_list;
186 struct ehci_itd *last_itd_to_free;
187 struct list_head cached_sitd_list;
188 struct ehci_sitd *last_sitd_to_free;
189
190 /* per root hub port */
191 unsigned long reset_done[EHCI_MAX_ROOT_PORTS];
192
193 /* bit vectors (one bit per port) */
194 unsigned long bus_suspended; /* which ports were
195 already suspended at the start of a bus suspend */
196 unsigned long companion_ports; /* which ports are
197 dedicated to the companion controller */
198 unsigned long owned_ports; /* which ports are
199 owned by the companion during a bus suspend */
200 unsigned long port_c_suspend; /* which ports have
201 the change-suspend feature turned on */
202 unsigned long suspended_ports; /* which ports are
203 suspended */
204 unsigned long resuming_ports; /* which ports have
205 started to resume */
206
207 /* per-HC memory pools (could be per-bus, but ...) */
208 struct dma_pool *qh_pool; /* qh per active urb */
209 struct dma_pool *qtd_pool; /* one or more per qh */
210 struct dma_pool *itd_pool; /* itd per iso urb */
211 struct dma_pool *sitd_pool; /* sitd per split iso urb */
212
213 unsigned random_frame;
214 unsigned long next_statechange;
215 ktime_t last_periodic_enable;
216 u32 command;
217
218 /* SILICON QUIRKS */
219 unsigned no_selective_suspend:1;
220 unsigned has_fsl_port_bug:1; /* FreeScale */
221 unsigned has_fsl_hs_errata:1; /* Freescale HS quirk */
222 unsigned has_fsl_susp_errata:1; /* NXP SUSP quirk */
223 unsigned big_endian_mmio:1;
224 unsigned big_endian_desc:1;
225 unsigned big_endian_capbase:1;
226 unsigned has_amcc_usb23:1;
227 unsigned need_io_watchdog:1;
228 unsigned amd_pll_fix:1;
229 unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
230 unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
231 unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
232 unsigned need_oc_pp_cycle:1; /* MPC834X port power */
233 unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
234
235 /* required for usb32 quirk */
236 #define OHCI_CTRL_HCFS (3 << 6)
237 #define OHCI_USB_OPER (2 << 6)
238 #define OHCI_USB_SUSPEND (3 << 6)
239
240 #define OHCI_HCCTRL_OFFSET 0x4
241 #define OHCI_HCCTRL_LEN 0x4
242 __hc32 *ohci_hcctrl_reg;
243 unsigned has_hostpc:1;
244 unsigned has_tdi_phy_lpm:1;
245 unsigned has_ppcd:1; /* support per-port change bits */
246 u8 sbrn; /* packed release number */
247
248 /* irq statistics */
249#ifdef EHCI_STATS
250 struct ehci_stats stats;
251# define COUNT(x) ((x)++)
252#else
253# define COUNT(x)
254#endif
255
256 /* debug files */
257#ifdef CONFIG_DYNAMIC_DEBUG
258 struct dentry *debug_dir;
259#endif
260
261 /* bandwidth usage */
262#define EHCI_BANDWIDTH_SIZE 64
263#define EHCI_BANDWIDTH_FRAMES (EHCI_BANDWIDTH_SIZE >> 3)
264 u8 bandwidth[EHCI_BANDWIDTH_SIZE];
265 /* us allocated per uframe */
266 u8 tt_budget[EHCI_BANDWIDTH_SIZE];
267 /* us budgeted per uframe */
268 struct list_head tt_list;
269
270 /* platform-specific data -- must come last */
271 unsigned long priv[0] __aligned(sizeof(s64));
272};
273
274/* convert between an HCD pointer and the corresponding EHCI_HCD */
275static inline struct ehci_hcd *hcd_to_ehci(struct usb_hcd *hcd)
276{
277 return (struct ehci_hcd *) (hcd->hcd_priv);
278}
279static inline struct usb_hcd *ehci_to_hcd(struct ehci_hcd *ehci)
280{
281 return container_of((void *) ehci, struct usb_hcd, hcd_priv);
282}
283
284/*-------------------------------------------------------------------------*/
285
286#include <linux/usb/ehci_def.h>
287
288/*-------------------------------------------------------------------------*/
289
290#define QTD_NEXT(ehci, dma) cpu_to_hc32(ehci, (u32)dma)
291
292/*
293 * EHCI Specification 0.95 Section 3.5
294 * QTD: describe data transfer components (buffer, direction, ...)
295 * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
296 *
297 * These are associated only with "QH" (Queue Head) structures,
298 * used with control, bulk, and interrupt transfers.
299 */
300struct ehci_qtd {
301 /* first part defined by EHCI spec */
302 __hc32 hw_next; /* see EHCI 3.5.1 */
303 __hc32 hw_alt_next; /* see EHCI 3.5.2 */
304 __hc32 hw_token; /* see EHCI 3.5.3 */
305#define QTD_TOGGLE (1 << 31) /* data toggle */
306#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
307#define QTD_IOC (1 << 15) /* interrupt on complete */
308#define QTD_CERR(tok) (((tok)>>10) & 0x3)
309#define QTD_PID(tok) (((tok)>>8) & 0x3)
310#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
311#define QTD_STS_HALT (1 << 6) /* halted on error */
312#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
313#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
314#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
315#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
316#define QTD_STS_STS (1 << 1) /* split transaction state */
317#define QTD_STS_PING (1 << 0) /* issue PING? */
318
319#define ACTIVE_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_ACTIVE)
320#define HALT_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_HALT)
321#define STATUS_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_STS)
322
323 __hc32 hw_buf[5]; /* see EHCI 3.5.4 */
324 __hc32 hw_buf_hi[5]; /* Appendix B */
325
326 /* the rest is HCD-private */
327 dma_addr_t qtd_dma; /* qtd address */
328 struct list_head qtd_list; /* sw qtd list */
329 struct urb *urb; /* qtd's urb */
330 size_t length; /* length of buffer */
331} __aligned(32);
332
333/* mask NakCnt+T in qh->hw_alt_next */
334#define QTD_MASK(ehci) cpu_to_hc32(ehci, ~0x1f)
335
336#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
337
338/*-------------------------------------------------------------------------*/
339
340/* type tag from {qh,itd,sitd,fstn}->hw_next */
341#define Q_NEXT_TYPE(ehci, dma) ((dma) & cpu_to_hc32(ehci, 3 << 1))
342
343/*
344 * Now the following defines are not converted using the
345 * cpu_to_le32() macro anymore, since we have to support
346 * "dynamic" switching between be and le support, so that the driver
347 * can be used on one system with SoC EHCI controller using big-endian
348 * descriptors as well as a normal little-endian PCI EHCI controller.
349 */
350/* values for that type tag */
351#define Q_TYPE_ITD (0 << 1)
352#define Q_TYPE_QH (1 << 1)
353#define Q_TYPE_SITD (2 << 1)
354#define Q_TYPE_FSTN (3 << 1)
355
356/* next async queue entry, or pointer to interrupt/periodic QH */
357#define QH_NEXT(ehci, dma) \
358 (cpu_to_hc32(ehci, (((u32) dma) & ~0x01f) | Q_TYPE_QH))
359
360/* for periodic/async schedules and qtd lists, mark end of list */
361#define EHCI_LIST_END(ehci) cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
362
363/*
364 * Entries in periodic shadow table are pointers to one of four kinds
365 * of data structure. That's dictated by the hardware; a type tag is
366 * encoded in the low bits of the hardware's periodic schedule. Use
367 * Q_NEXT_TYPE to get the tag.
368 *
369 * For entries in the async schedule, the type tag always says "qh".
370 */
371union ehci_shadow {
372 struct ehci_qh *qh; /* Q_TYPE_QH */
373 struct ehci_itd *itd; /* Q_TYPE_ITD */
374 struct ehci_sitd *sitd; /* Q_TYPE_SITD */
375 struct ehci_fstn *fstn; /* Q_TYPE_FSTN */
376 __hc32 *hw_next; /* (all types) */
377 void *ptr;
378};
379
380/*-------------------------------------------------------------------------*/
381
382/*
383 * EHCI Specification 0.95 Section 3.6
384 * QH: describes control/bulk/interrupt endpoints
385 * See Fig 3-7 "Queue Head Structure Layout".
386 *
387 * These appear in both the async and (for interrupt) periodic schedules.
388 */
389
390/* first part defined by EHCI spec */
391struct ehci_qh_hw {
392 __hc32 hw_next; /* see EHCI 3.6.1 */
393 __hc32 hw_info1; /* see EHCI 3.6.2 */
394#define QH_CONTROL_EP (1 << 27) /* FS/LS control endpoint */
395#define QH_HEAD (1 << 15) /* Head of async reclamation list */
396#define QH_TOGGLE_CTL (1 << 14) /* Data toggle control */
397#define QH_HIGH_SPEED (2 << 12) /* Endpoint speed */
398#define QH_LOW_SPEED (1 << 12)
399#define QH_FULL_SPEED (0 << 12)
400#define QH_INACTIVATE (1 << 7) /* Inactivate on next transaction */
401 __hc32 hw_info2; /* see EHCI 3.6.2 */
402#define QH_SMASK 0x000000ff
403#define QH_CMASK 0x0000ff00
404#define QH_HUBADDR 0x007f0000
405#define QH_HUBPORT 0x3f800000
406#define QH_MULT 0xc0000000
407 __hc32 hw_current; /* qtd list - see EHCI 3.6.4 */
408
409 /* qtd overlay (hardware parts of a struct ehci_qtd) */
410 __hc32 hw_qtd_next;
411 __hc32 hw_alt_next;
412 __hc32 hw_token;
413 __hc32 hw_buf[5];
414 __hc32 hw_buf_hi[5];
415} __aligned(32);
416
417struct ehci_qh {
418 struct ehci_qh_hw *hw; /* Must come first */
419 /* the rest is HCD-private */
420 dma_addr_t qh_dma; /* address of qh */
421 union ehci_shadow qh_next; /* ptr to qh; or periodic */
422 struct list_head qtd_list; /* sw qtd list */
423 struct list_head intr_node; /* list of intr QHs */
424 struct ehci_qtd *dummy;
425 struct list_head unlink_node;
426 struct ehci_per_sched ps; /* scheduling info */
427
428 unsigned unlink_cycle;
429
430 u8 qh_state;
431#define QH_STATE_LINKED 1 /* HC sees this */
432#define QH_STATE_UNLINK 2 /* HC may still see this */
433#define QH_STATE_IDLE 3 /* HC doesn't see this */
434#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on unlink q */
435#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
436
437 u8 xacterrs; /* XactErr retry counter */
438#define QH_XACTERR_MAX 32 /* XactErr retry limit */
439
440 u8 unlink_reason;
441#define QH_UNLINK_HALTED 0x01 /* Halt flag is set */
442#define QH_UNLINK_SHORT_READ 0x02 /* Recover from a short read */
443#define QH_UNLINK_DUMMY_OVERLAY 0x04 /* QH overlayed the dummy TD */
444#define QH_UNLINK_SHUTDOWN 0x08 /* The HC isn't running */
445#define QH_UNLINK_QUEUE_EMPTY 0x10 /* Reached end of the queue */
446#define QH_UNLINK_REQUESTED 0x20 /* Disable, reset, or dequeue */
447
448 u8 gap_uf; /* uframes split/csplit gap */
449
450 unsigned is_out:1; /* bulk or intr OUT */
451 unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
452 unsigned dequeue_during_giveback:1;
453 unsigned should_be_inactive:1;
454};
455
456/*-------------------------------------------------------------------------*/
457
458/* description of one iso transaction (up to 3 KB data if highspeed) */
459struct ehci_iso_packet {
460 /* These will be copied to iTD when scheduling */
461 u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
462 __hc32 transaction; /* itd->hw_transaction[i] |= */
463 u8 cross; /* buf crosses pages */
464 /* for full speed OUT splits */
465 u32 buf1;
466};
467
468/* temporary schedule data for packets from iso urbs (both speeds)
469 * each packet is one logical usb transaction to the device (not TT),
470 * beginning at stream->next_uframe
471 */
472struct ehci_iso_sched {
473 struct list_head td_list;
474 unsigned span;
475 unsigned first_packet;
476 struct ehci_iso_packet packet[0];
477};
478
479/*
480 * ehci_iso_stream - groups all (s)itds for this endpoint.
481 * acts like a qh would, if EHCI had them for ISO.
482 */
483struct ehci_iso_stream {
484 /* first field matches ehci_hq, but is NULL */
485 struct ehci_qh_hw *hw;
486
487 u8 bEndpointAddress;
488 u8 highspeed;
489 struct list_head td_list; /* queued itds/sitds */
490 struct list_head free_list; /* list of unused itds/sitds */
491
492 /* output of (re)scheduling */
493 struct ehci_per_sched ps; /* scheduling info */
494 unsigned next_uframe;
495 __hc32 splits;
496
497 /* the rest is derived from the endpoint descriptor,
498 * including the extra info for hw_bufp[0..2]
499 */
500 u16 uperiod; /* period in uframes */
501 u16 maxp;
502 unsigned bandwidth;
503
504 /* This is used to initialize iTD's hw_bufp fields */
505 __hc32 buf0;
506 __hc32 buf1;
507 __hc32 buf2;
508
509 /* this is used to initialize sITD's tt info */
510 __hc32 address;
511};
512
513/*-------------------------------------------------------------------------*/
514
515/*
516 * EHCI Specification 0.95 Section 3.3
517 * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
518 *
519 * Schedule records for high speed iso xfers
520 */
521struct ehci_itd {
522 /* first part defined by EHCI spec */
523 __hc32 hw_next; /* see EHCI 3.3.1 */
524 __hc32 hw_transaction[8]; /* see EHCI 3.3.2 */
525#define EHCI_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
526#define EHCI_ISOC_BUF_ERR (1<<30) /* Data buffer error */
527#define EHCI_ISOC_BABBLE (1<<29) /* babble detected */
528#define EHCI_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
529#define EHCI_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
530#define EHCI_ITD_IOC (1 << 15) /* interrupt on complete */
531
532#define ITD_ACTIVE(ehci) cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
533
534 __hc32 hw_bufp[7]; /* see EHCI 3.3.3 */
535 __hc32 hw_bufp_hi[7]; /* Appendix B */
536
537 /* the rest is HCD-private */
538 dma_addr_t itd_dma; /* for this itd */
539 union ehci_shadow itd_next; /* ptr to periodic q entry */
540
541 struct urb *urb;
542 struct ehci_iso_stream *stream; /* endpoint's queue */
543 struct list_head itd_list; /* list of stream's itds */
544
545 /* any/all hw_transactions here may be used by that urb */
546 unsigned frame; /* where scheduled */
547 unsigned pg;
548 unsigned index[8]; /* in urb->iso_frame_desc */
549} __aligned(32);
550
551/*-------------------------------------------------------------------------*/
552
553/*
554 * EHCI Specification 0.95 Section 3.4
555 * siTD, aka split-transaction isochronous Transfer Descriptor
556 * ... describe full speed iso xfers through TT in hubs
557 * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
558 */
559struct ehci_sitd {
560 /* first part defined by EHCI spec */
561 __hc32 hw_next;
562/* uses bit field macros above - see EHCI 0.95 Table 3-8 */
563 __hc32 hw_fullspeed_ep; /* EHCI table 3-9 */
564 __hc32 hw_uframe; /* EHCI table 3-10 */
565 __hc32 hw_results; /* EHCI table 3-11 */
566#define SITD_IOC (1 << 31) /* interrupt on completion */
567#define SITD_PAGE (1 << 30) /* buffer 0/1 */
568#define SITD_LENGTH(x) (((x) >> 16) & 0x3ff)
569#define SITD_STS_ACTIVE (1 << 7) /* HC may execute this */
570#define SITD_STS_ERR (1 << 6) /* error from TT */
571#define SITD_STS_DBE (1 << 5) /* data buffer error (in HC) */
572#define SITD_STS_BABBLE (1 << 4) /* device was babbling */
573#define SITD_STS_XACT (1 << 3) /* illegal IN response */
574#define SITD_STS_MMF (1 << 2) /* incomplete split transaction */
575#define SITD_STS_STS (1 << 1) /* split transaction state */
576
577#define SITD_ACTIVE(ehci) cpu_to_hc32(ehci, SITD_STS_ACTIVE)
578
579 __hc32 hw_buf[2]; /* EHCI table 3-12 */
580 __hc32 hw_backpointer; /* EHCI table 3-13 */
581 __hc32 hw_buf_hi[2]; /* Appendix B */
582
583 /* the rest is HCD-private */
584 dma_addr_t sitd_dma;
585 union ehci_shadow sitd_next; /* ptr to periodic q entry */
586
587 struct urb *urb;
588 struct ehci_iso_stream *stream; /* endpoint's queue */
589 struct list_head sitd_list; /* list of stream's sitds */
590 unsigned frame;
591 unsigned index;
592} __aligned(32);
593
594/*-------------------------------------------------------------------------*/
595
596/*
597 * EHCI Specification 0.96 Section 3.7
598 * Periodic Frame Span Traversal Node (FSTN)
599 *
600 * Manages split interrupt transactions (using TT) that span frame boundaries
601 * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
602 * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
603 * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
604 */
605struct ehci_fstn {
606 __hc32 hw_next; /* any periodic q entry */
607 __hc32 hw_prev; /* qh or EHCI_LIST_END */
608
609 /* the rest is HCD-private */
610 dma_addr_t fstn_dma;
611 union ehci_shadow fstn_next; /* ptr to periodic q entry */
612} __aligned(32);
613
614/*-------------------------------------------------------------------------*/
615
616/*
617 * USB-2.0 Specification Sections 11.14 and 11.18
618 * Scheduling and budgeting split transactions using TTs
619 *
620 * A hub can have a single TT for all its ports, or multiple TTs (one for each
621 * port). The bandwidth and budgeting information for the full/low-speed bus
622 * below each TT is self-contained and independent of the other TTs or the
623 * high-speed bus.
624 *
625 * "Bandwidth" refers to the number of microseconds on the FS/LS bus allocated
626 * to an interrupt or isochronous endpoint for each frame. "Budget" refers to
627 * the best-case estimate of the number of full-speed bytes allocated to an
628 * endpoint for each microframe within an allocated frame.
629 *
630 * Removal of an endpoint invalidates a TT's budget. Instead of trying to
631 * keep an up-to-date record, we recompute the budget when it is needed.
632 */
633
634struct ehci_tt {
635 u16 bandwidth[EHCI_BANDWIDTH_FRAMES];
636
637 struct list_head tt_list; /* List of all ehci_tt's */
638 struct list_head ps_list; /* Items using this TT */
639 struct usb_tt *usb_tt;
640 int tt_port; /* TT port number */
641};
642
643/*-------------------------------------------------------------------------*/
644
645/* Prepare the PORTSC wakeup flags during controller suspend/resume */
646
647#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \
648 ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup)
649
650#define ehci_prepare_ports_for_controller_resume(ehci) \
651 ehci_adjust_port_wakeup_flags(ehci, false, false)
652
653/*-------------------------------------------------------------------------*/
654
655#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
656
657/*
658 * Some EHCI controllers have a Transaction Translator built into the
659 * root hub. This is a non-standard feature. Each controller will need
660 * to add code to the following inline functions, and call them as
661 * needed (mostly in root hub code).
662 */
663
664#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt)
665
666/* Returns the speed of a device attached to a port on the root hub. */
667static inline unsigned int
668ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
669{
670 if (ehci_is_TDI(ehci)) {
671 switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
672 case 0:
673 return 0;
674 case 1:
675 return USB_PORT_STAT_LOW_SPEED;
676 case 2:
677 default:
678 return USB_PORT_STAT_HIGH_SPEED;
679 }
680 }
681 return USB_PORT_STAT_HIGH_SPEED;
682}
683
684#else
685
686#define ehci_is_TDI(e) (0)
687
688#define ehci_port_speed(ehci, portsc) USB_PORT_STAT_HIGH_SPEED
689#endif
690
691/*-------------------------------------------------------------------------*/
692
693#ifdef CONFIG_PPC_83xx
694/* Some Freescale processors have an erratum in which the TT
695 * port number in the queue head was 0..N-1 instead of 1..N.
696 */
697#define ehci_has_fsl_portno_bug(e) ((e)->has_fsl_port_bug)
698#else
699#define ehci_has_fsl_portno_bug(e) (0)
700#endif
701
702#define PORTSC_FSL_PFSC 24 /* Port Force Full-Speed Connect */
703
704#if defined(CONFIG_PPC_85xx)
705/* Some Freescale processors have an erratum (USB A-005275) in which
706 * incoming packets get corrupted in HS mode
707 */
708#define ehci_has_fsl_hs_errata(e) ((e)->has_fsl_hs_errata)
709#else
710#define ehci_has_fsl_hs_errata(e) (0)
711#endif
712
713/*
714 * Some Freescale/NXP processors have an erratum (USB A-005697)
715 * in which we need to wait for 10ms for bus to enter suspend mode
716 * after setting SUSP bit.
717 */
718#define ehci_has_fsl_susp_errata(e) ((e)->has_fsl_susp_errata)
719
720/*
721 * While most USB host controllers implement their registers in
722 * little-endian format, a minority (celleb companion chip) implement
723 * them in big endian format.
724 *
725 * This attempts to support either format at compile time without a
726 * runtime penalty, or both formats with the additional overhead
727 * of checking a flag bit.
728 *
729 * ehci_big_endian_capbase is a special quirk for controllers that
730 * implement the HC capability registers as separate registers and not
731 * as fields of a 32-bit register.
732 */
733
734#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
735#define ehci_big_endian_mmio(e) ((e)->big_endian_mmio)
736#define ehci_big_endian_capbase(e) ((e)->big_endian_capbase)
737#else
738#define ehci_big_endian_mmio(e) 0
739#define ehci_big_endian_capbase(e) 0
740#endif
741
742/*
743 * Big-endian read/write functions are arch-specific.
744 * Other arches can be added if/when they're needed.
745 */
746#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
747#define readl_be(addr) __raw_readl((__force unsigned *)addr)
748#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
749#endif
750
751static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
752 __u32 __iomem *regs)
753{
754#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
755 return ehci_big_endian_mmio(ehci) ?
756 readl_be(regs) :
757 readl(regs);
758#else
759 return readl(regs);
760#endif
761}
762
763#ifdef CONFIG_SOC_IMX28
764static inline void imx28_ehci_writel(const unsigned int val,
765 volatile __u32 __iomem *addr)
766{
767 __asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
768}
769#else
770static inline void imx28_ehci_writel(const unsigned int val,
771 volatile __u32 __iomem *addr)
772{
773}
774#endif
775static inline void ehci_writel(const struct ehci_hcd *ehci,
776 const unsigned int val, __u32 __iomem *regs)
777{
778#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
779 ehci_big_endian_mmio(ehci) ?
780 writel_be(val, regs) :
781 writel(val, regs);
782#else
783 if (ehci->imx28_write_fix)
784 imx28_ehci_writel(val, regs);
785 else
786 writel(val, regs);
787#endif
788}
789
790/*
791 * On certain ppc-44x SoC there is a HW issue, that could only worked around with
792 * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
793 * Other common bits are dependent on has_amcc_usb23 quirk flag.
794 */
795#ifdef CONFIG_44x
796static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
797{
798 u32 hc_control;
799
800 hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
801 if (operational)
802 hc_control |= OHCI_USB_OPER;
803 else
804 hc_control |= OHCI_USB_SUSPEND;
805
806 writel_be(hc_control, ehci->ohci_hcctrl_reg);
807 (void) readl_be(ehci->ohci_hcctrl_reg);
808}
809#else
810static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
811{ }
812#endif
813
814/*-------------------------------------------------------------------------*/
815
816/*
817 * The AMCC 440EPx not only implements its EHCI registers in big-endian
818 * format, but also its DMA data structures (descriptors).
819 *
820 * EHCI controllers accessed through PCI work normally (little-endian
821 * everywhere), so we won't bother supporting a BE-only mode for now.
822 */
823#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
824#define ehci_big_endian_desc(e) ((e)->big_endian_desc)
825
826/* cpu to ehci */
827static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x)
828{
829 return ehci_big_endian_desc(ehci)
830 ? (__force __hc32)cpu_to_be32(x)
831 : (__force __hc32)cpu_to_le32(x);
832}
833
834/* ehci to cpu */
835static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x)
836{
837 return ehci_big_endian_desc(ehci)
838 ? be32_to_cpu((__force __be32)x)
839 : le32_to_cpu((__force __le32)x);
840}
841
842static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x)
843{
844 return ehci_big_endian_desc(ehci)
845 ? be32_to_cpup((__force __be32 *)x)
846 : le32_to_cpup((__force __le32 *)x);
847}
848
849#else
850
851/* cpu to ehci */
852static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x)
853{
854 return cpu_to_le32(x);
855}
856
857/* ehci to cpu */
858static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x)
859{
860 return le32_to_cpu(x);
861}
862
863static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x)
864{
865 return le32_to_cpup(x);
866}
867
868#endif
869
870/*-------------------------------------------------------------------------*/
871
872#define ehci_dbg(ehci, fmt, args...) \
873 dev_dbg(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
874#define ehci_err(ehci, fmt, args...) \
875 dev_err(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
876#define ehci_info(ehci, fmt, args...) \
877 dev_info(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
878#define ehci_warn(ehci, fmt, args...) \
879 dev_warn(ehci_to_hcd(ehci)->self.controller, fmt, ## args)
880
881/*-------------------------------------------------------------------------*/
882
883/* Declarations of things exported for use by ehci platform drivers */
884
885struct ehci_driver_overrides {
886 size_t extra_priv_size;
887 int (*reset)(struct usb_hcd *hcd);
888 int (*port_power)(struct usb_hcd *hcd,
889 int portnum, bool enable);
890};
891
892extern void ehci_init_driver(struct hc_driver *drv,
893 const struct ehci_driver_overrides *over);
894extern int ehci_setup(struct usb_hcd *hcd);
895extern int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
896 u32 mask, u32 done, int usec);
897extern int ehci_reset(struct ehci_hcd *ehci);
898
899extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);
900extern int ehci_resume(struct usb_hcd *hcd, bool force_reset);
901extern void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
902 bool suspending, bool do_wakeup);
903
904extern int ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
905 u16 wIndex, char *buf, u16 wLength);
906
907#endif /* __LINUX_EHCI_HCD_H */