Loading...
1/*
2 * Copyright © 2006-2007 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
22 *
23 * Authors:
24 * Eric Anholt <eric@anholt.net>
25 */
26
27#include <linux/dmi.h>
28#include <linux/i2c.h>
29#include <linux/slab.h>
30#include <drm/drmP.h>
31#include <drm/drm_atomic_helper.h>
32#include <drm/drm_crtc.h>
33#include <drm/drm_crtc_helper.h>
34#include <drm/drm_edid.h>
35#include "intel_drv.h"
36#include <drm/i915_drm.h>
37#include "i915_drv.h"
38
39/* Here's the desired hotplug mode */
40#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \
41 ADPA_CRT_HOTPLUG_WARMUP_10MS | \
42 ADPA_CRT_HOTPLUG_SAMPLE_4S | \
43 ADPA_CRT_HOTPLUG_VOLTAGE_50 | \
44 ADPA_CRT_HOTPLUG_VOLREF_325MV | \
45 ADPA_CRT_HOTPLUG_ENABLE)
46
47struct intel_crt {
48 struct intel_encoder base;
49 /* DPMS state is stored in the connector, which we need in the
50 * encoder's enable/disable callbacks */
51 struct intel_connector *connector;
52 bool force_hotplug_required;
53 i915_reg_t adpa_reg;
54};
55
56static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
57{
58 return container_of(encoder, struct intel_crt, base);
59}
60
61static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
62{
63 return intel_encoder_to_crt(intel_attached_encoder(connector));
64}
65
66static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
67 enum pipe *pipe)
68{
69 struct drm_device *dev = encoder->base.dev;
70 struct drm_i915_private *dev_priv = dev->dev_private;
71 struct intel_crt *crt = intel_encoder_to_crt(encoder);
72 enum intel_display_power_domain power_domain;
73 u32 tmp;
74 bool ret;
75
76 power_domain = intel_display_port_power_domain(encoder);
77 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
78 return false;
79
80 ret = false;
81
82 tmp = I915_READ(crt->adpa_reg);
83
84 if (!(tmp & ADPA_DAC_ENABLE))
85 goto out;
86
87 if (HAS_PCH_CPT(dev))
88 *pipe = PORT_TO_PIPE_CPT(tmp);
89 else
90 *pipe = PORT_TO_PIPE(tmp);
91
92 ret = true;
93out:
94 intel_display_power_put(dev_priv, power_domain);
95
96 return ret;
97}
98
99static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
100{
101 struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
102 struct intel_crt *crt = intel_encoder_to_crt(encoder);
103 u32 tmp, flags = 0;
104
105 tmp = I915_READ(crt->adpa_reg);
106
107 if (tmp & ADPA_HSYNC_ACTIVE_HIGH)
108 flags |= DRM_MODE_FLAG_PHSYNC;
109 else
110 flags |= DRM_MODE_FLAG_NHSYNC;
111
112 if (tmp & ADPA_VSYNC_ACTIVE_HIGH)
113 flags |= DRM_MODE_FLAG_PVSYNC;
114 else
115 flags |= DRM_MODE_FLAG_NVSYNC;
116
117 return flags;
118}
119
120static void intel_crt_get_config(struct intel_encoder *encoder,
121 struct intel_crtc_state *pipe_config)
122{
123 struct drm_device *dev = encoder->base.dev;
124 int dotclock;
125
126 pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);
127
128 dotclock = pipe_config->port_clock;
129
130 if (HAS_PCH_SPLIT(dev))
131 ironlake_check_encoder_dotclock(pipe_config, dotclock);
132
133 pipe_config->base.adjusted_mode.crtc_clock = dotclock;
134}
135
136static void hsw_crt_get_config(struct intel_encoder *encoder,
137 struct intel_crtc_state *pipe_config)
138{
139 intel_ddi_get_config(encoder, pipe_config);
140
141 pipe_config->base.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
142 DRM_MODE_FLAG_NHSYNC |
143 DRM_MODE_FLAG_PVSYNC |
144 DRM_MODE_FLAG_NVSYNC);
145 pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);
146}
147
148/* Note: The caller is required to filter out dpms modes not supported by the
149 * platform. */
150static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
151{
152 struct drm_device *dev = encoder->base.dev;
153 struct drm_i915_private *dev_priv = dev->dev_private;
154 struct intel_crt *crt = intel_encoder_to_crt(encoder);
155 struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
156 const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
157 u32 adpa;
158
159 if (INTEL_INFO(dev)->gen >= 5)
160 adpa = ADPA_HOTPLUG_BITS;
161 else
162 adpa = 0;
163
164 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
165 adpa |= ADPA_HSYNC_ACTIVE_HIGH;
166 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
167 adpa |= ADPA_VSYNC_ACTIVE_HIGH;
168
169 /* For CPT allow 3 pipe config, for others just use A or B */
170 if (HAS_PCH_LPT(dev))
171 ; /* Those bits don't exist here */
172 else if (HAS_PCH_CPT(dev))
173 adpa |= PORT_TRANS_SEL_CPT(crtc->pipe);
174 else if (crtc->pipe == 0)
175 adpa |= ADPA_PIPE_A_SELECT;
176 else
177 adpa |= ADPA_PIPE_B_SELECT;
178
179 if (!HAS_PCH_SPLIT(dev))
180 I915_WRITE(BCLRPAT(crtc->pipe), 0);
181
182 switch (mode) {
183 case DRM_MODE_DPMS_ON:
184 adpa |= ADPA_DAC_ENABLE;
185 break;
186 case DRM_MODE_DPMS_STANDBY:
187 adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
188 break;
189 case DRM_MODE_DPMS_SUSPEND:
190 adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
191 break;
192 case DRM_MODE_DPMS_OFF:
193 adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
194 break;
195 }
196
197 I915_WRITE(crt->adpa_reg, adpa);
198}
199
200static void intel_disable_crt(struct intel_encoder *encoder)
201{
202 intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
203}
204
205static void pch_disable_crt(struct intel_encoder *encoder)
206{
207}
208
209static void pch_post_disable_crt(struct intel_encoder *encoder)
210{
211 intel_disable_crt(encoder);
212}
213
214static void intel_enable_crt(struct intel_encoder *encoder)
215{
216 intel_crt_set_dpms(encoder, DRM_MODE_DPMS_ON);
217}
218
219static enum drm_mode_status
220intel_crt_mode_valid(struct drm_connector *connector,
221 struct drm_display_mode *mode)
222{
223 struct drm_device *dev = connector->dev;
224 int max_dotclk = to_i915(dev)->max_dotclk_freq;
225
226 int max_clock = 0;
227 if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
228 return MODE_NO_DBLESCAN;
229
230 if (mode->clock < 25000)
231 return MODE_CLOCK_LOW;
232
233 if (IS_GEN2(dev))
234 max_clock = 350000;
235 else
236 max_clock = 400000;
237 if (mode->clock > max_clock)
238 return MODE_CLOCK_HIGH;
239
240 if (mode->clock > max_dotclk)
241 return MODE_CLOCK_HIGH;
242
243 /* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */
244 if (HAS_PCH_LPT(dev) &&
245 (ironlake_get_lanes_required(mode->clock, 270000, 24) > 2))
246 return MODE_CLOCK_HIGH;
247
248 return MODE_OK;
249}
250
251static bool intel_crt_compute_config(struct intel_encoder *encoder,
252 struct intel_crtc_state *pipe_config)
253{
254 struct drm_device *dev = encoder->base.dev;
255
256 if (HAS_PCH_SPLIT(dev))
257 pipe_config->has_pch_encoder = true;
258
259 /* LPT FDI RX only supports 8bpc. */
260 if (HAS_PCH_LPT(dev)) {
261 if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) {
262 DRM_DEBUG_KMS("LPT only supports 24bpp\n");
263 return false;
264 }
265
266 pipe_config->pipe_bpp = 24;
267 }
268
269 /* FDI must always be 2.7 GHz */
270 if (HAS_DDI(dev)) {
271 pipe_config->ddi_pll_sel = PORT_CLK_SEL_SPLL;
272 pipe_config->port_clock = 135000 * 2;
273
274 pipe_config->dpll_hw_state.wrpll = 0;
275 pipe_config->dpll_hw_state.spll =
276 SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC;
277 }
278
279 return true;
280}
281
282static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
283{
284 struct drm_device *dev = connector->dev;
285 struct intel_crt *crt = intel_attached_crt(connector);
286 struct drm_i915_private *dev_priv = dev->dev_private;
287 u32 adpa;
288 bool ret;
289
290 /* The first time through, trigger an explicit detection cycle */
291 if (crt->force_hotplug_required) {
292 bool turn_off_dac = HAS_PCH_SPLIT(dev);
293 u32 save_adpa;
294
295 crt->force_hotplug_required = 0;
296
297 save_adpa = adpa = I915_READ(crt->adpa_reg);
298 DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
299
300 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
301 if (turn_off_dac)
302 adpa &= ~ADPA_DAC_ENABLE;
303
304 I915_WRITE(crt->adpa_reg, adpa);
305
306 if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
307 1000))
308 DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
309
310 if (turn_off_dac) {
311 I915_WRITE(crt->adpa_reg, save_adpa);
312 POSTING_READ(crt->adpa_reg);
313 }
314 }
315
316 /* Check the status to see if both blue and green are on now */
317 adpa = I915_READ(crt->adpa_reg);
318 if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
319 ret = true;
320 else
321 ret = false;
322 DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
323
324 return ret;
325}
326
327static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
328{
329 struct drm_device *dev = connector->dev;
330 struct intel_crt *crt = intel_attached_crt(connector);
331 struct drm_i915_private *dev_priv = dev->dev_private;
332 u32 adpa;
333 bool ret;
334 u32 save_adpa;
335
336 save_adpa = adpa = I915_READ(crt->adpa_reg);
337 DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
338
339 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
340
341 I915_WRITE(crt->adpa_reg, adpa);
342
343 if (wait_for((I915_READ(crt->adpa_reg) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
344 1000)) {
345 DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
346 I915_WRITE(crt->adpa_reg, save_adpa);
347 }
348
349 /* Check the status to see if both blue and green are on now */
350 adpa = I915_READ(crt->adpa_reg);
351 if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
352 ret = true;
353 else
354 ret = false;
355
356 DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
357
358 return ret;
359}
360
361/**
362 * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
363 *
364 * Not for i915G/i915GM
365 *
366 * \return true if CRT is connected.
367 * \return false if CRT is disconnected.
368 */
369static bool intel_crt_detect_hotplug(struct drm_connector *connector)
370{
371 struct drm_device *dev = connector->dev;
372 struct drm_i915_private *dev_priv = dev->dev_private;
373 u32 stat;
374 bool ret = false;
375 int i, tries = 0;
376
377 if (HAS_PCH_SPLIT(dev))
378 return intel_ironlake_crt_detect_hotplug(connector);
379
380 if (IS_VALLEYVIEW(dev))
381 return valleyview_crt_detect_hotplug(connector);
382
383 /*
384 * On 4 series desktop, CRT detect sequence need to be done twice
385 * to get a reliable result.
386 */
387
388 if (IS_G4X(dev) && !IS_GM45(dev))
389 tries = 2;
390 else
391 tries = 1;
392
393 for (i = 0; i < tries ; i++) {
394 /* turn on the FORCE_DETECT */
395 i915_hotplug_interrupt_update(dev_priv,
396 CRT_HOTPLUG_FORCE_DETECT,
397 CRT_HOTPLUG_FORCE_DETECT);
398 /* wait for FORCE_DETECT to go off */
399 if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
400 CRT_HOTPLUG_FORCE_DETECT) == 0,
401 1000))
402 DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
403 }
404
405 stat = I915_READ(PORT_HOTPLUG_STAT);
406 if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
407 ret = true;
408
409 /* clear the interrupt we just generated, if any */
410 I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
411
412 i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, 0);
413
414 return ret;
415}
416
417static struct edid *intel_crt_get_edid(struct drm_connector *connector,
418 struct i2c_adapter *i2c)
419{
420 struct edid *edid;
421
422 edid = drm_get_edid(connector, i2c);
423
424 if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
425 DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");
426 intel_gmbus_force_bit(i2c, true);
427 edid = drm_get_edid(connector, i2c);
428 intel_gmbus_force_bit(i2c, false);
429 }
430
431 return edid;
432}
433
434/* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */
435static int intel_crt_ddc_get_modes(struct drm_connector *connector,
436 struct i2c_adapter *adapter)
437{
438 struct edid *edid;
439 int ret;
440
441 edid = intel_crt_get_edid(connector, adapter);
442 if (!edid)
443 return 0;
444
445 ret = intel_connector_update_modes(connector, edid);
446 kfree(edid);
447
448 return ret;
449}
450
451static bool intel_crt_detect_ddc(struct drm_connector *connector)
452{
453 struct intel_crt *crt = intel_attached_crt(connector);
454 struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
455 struct edid *edid;
456 struct i2c_adapter *i2c;
457
458 BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG);
459
460 i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
461 edid = intel_crt_get_edid(connector, i2c);
462
463 if (edid) {
464 bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
465
466 /*
467 * This may be a DVI-I connector with a shared DDC
468 * link between analog and digital outputs, so we
469 * have to check the EDID input spec of the attached device.
470 */
471 if (!is_digital) {
472 DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
473 return true;
474 }
475
476 DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
477 } else {
478 DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [no valid EDID found]\n");
479 }
480
481 kfree(edid);
482
483 return false;
484}
485
486static enum drm_connector_status
487intel_crt_load_detect(struct intel_crt *crt, uint32_t pipe)
488{
489 struct drm_device *dev = crt->base.base.dev;
490 struct drm_i915_private *dev_priv = dev->dev_private;
491 uint32_t save_bclrpat;
492 uint32_t save_vtotal;
493 uint32_t vtotal, vactive;
494 uint32_t vsample;
495 uint32_t vblank, vblank_start, vblank_end;
496 uint32_t dsl;
497 i915_reg_t bclrpat_reg, vtotal_reg,
498 vblank_reg, vsync_reg, pipeconf_reg, pipe_dsl_reg;
499 uint8_t st00;
500 enum drm_connector_status status;
501
502 DRM_DEBUG_KMS("starting load-detect on CRT\n");
503
504 bclrpat_reg = BCLRPAT(pipe);
505 vtotal_reg = VTOTAL(pipe);
506 vblank_reg = VBLANK(pipe);
507 vsync_reg = VSYNC(pipe);
508 pipeconf_reg = PIPECONF(pipe);
509 pipe_dsl_reg = PIPEDSL(pipe);
510
511 save_bclrpat = I915_READ(bclrpat_reg);
512 save_vtotal = I915_READ(vtotal_reg);
513 vblank = I915_READ(vblank_reg);
514
515 vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
516 vactive = (save_vtotal & 0x7ff) + 1;
517
518 vblank_start = (vblank & 0xfff) + 1;
519 vblank_end = ((vblank >> 16) & 0xfff) + 1;
520
521 /* Set the border color to purple. */
522 I915_WRITE(bclrpat_reg, 0x500050);
523
524 if (!IS_GEN2(dev)) {
525 uint32_t pipeconf = I915_READ(pipeconf_reg);
526 I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
527 POSTING_READ(pipeconf_reg);
528 /* Wait for next Vblank to substitue
529 * border color for Color info */
530 intel_wait_for_vblank(dev, pipe);
531 st00 = I915_READ8(_VGA_MSR_WRITE);
532 status = ((st00 & (1 << 4)) != 0) ?
533 connector_status_connected :
534 connector_status_disconnected;
535
536 I915_WRITE(pipeconf_reg, pipeconf);
537 } else {
538 bool restore_vblank = false;
539 int count, detect;
540
541 /*
542 * If there isn't any border, add some.
543 * Yes, this will flicker
544 */
545 if (vblank_start <= vactive && vblank_end >= vtotal) {
546 uint32_t vsync = I915_READ(vsync_reg);
547 uint32_t vsync_start = (vsync & 0xffff) + 1;
548
549 vblank_start = vsync_start;
550 I915_WRITE(vblank_reg,
551 (vblank_start - 1) |
552 ((vblank_end - 1) << 16));
553 restore_vblank = true;
554 }
555 /* sample in the vertical border, selecting the larger one */
556 if (vblank_start - vactive >= vtotal - vblank_end)
557 vsample = (vblank_start + vactive) >> 1;
558 else
559 vsample = (vtotal + vblank_end) >> 1;
560
561 /*
562 * Wait for the border to be displayed
563 */
564 while (I915_READ(pipe_dsl_reg) >= vactive)
565 ;
566 while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
567 ;
568 /*
569 * Watch ST00 for an entire scanline
570 */
571 detect = 0;
572 count = 0;
573 do {
574 count++;
575 /* Read the ST00 VGA status register */
576 st00 = I915_READ8(_VGA_MSR_WRITE);
577 if (st00 & (1 << 4))
578 detect++;
579 } while ((I915_READ(pipe_dsl_reg) == dsl));
580
581 /* restore vblank if necessary */
582 if (restore_vblank)
583 I915_WRITE(vblank_reg, vblank);
584 /*
585 * If more than 3/4 of the scanline detected a monitor,
586 * then it is assumed to be present. This works even on i830,
587 * where there isn't any way to force the border color across
588 * the screen
589 */
590 status = detect * 4 > count * 3 ?
591 connector_status_connected :
592 connector_status_disconnected;
593 }
594
595 /* Restore previous settings */
596 I915_WRITE(bclrpat_reg, save_bclrpat);
597
598 return status;
599}
600
601static enum drm_connector_status
602intel_crt_detect(struct drm_connector *connector, bool force)
603{
604 struct drm_device *dev = connector->dev;
605 struct drm_i915_private *dev_priv = dev->dev_private;
606 struct intel_crt *crt = intel_attached_crt(connector);
607 struct intel_encoder *intel_encoder = &crt->base;
608 enum intel_display_power_domain power_domain;
609 enum drm_connector_status status;
610 struct intel_load_detect_pipe tmp;
611 struct drm_modeset_acquire_ctx ctx;
612
613 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
614 connector->base.id, connector->name,
615 force);
616
617 power_domain = intel_display_port_power_domain(intel_encoder);
618 intel_display_power_get(dev_priv, power_domain);
619
620 if (I915_HAS_HOTPLUG(dev)) {
621 /* We can not rely on the HPD pin always being correctly wired
622 * up, for example many KVM do not pass it through, and so
623 * only trust an assertion that the monitor is connected.
624 */
625 if (intel_crt_detect_hotplug(connector)) {
626 DRM_DEBUG_KMS("CRT detected via hotplug\n");
627 status = connector_status_connected;
628 goto out;
629 } else
630 DRM_DEBUG_KMS("CRT not detected via hotplug\n");
631 }
632
633 if (intel_crt_detect_ddc(connector)) {
634 status = connector_status_connected;
635 goto out;
636 }
637
638 /* Load detection is broken on HPD capable machines. Whoever wants a
639 * broken monitor (without edid) to work behind a broken kvm (that fails
640 * to have the right resistors for HP detection) needs to fix this up.
641 * For now just bail out. */
642 if (I915_HAS_HOTPLUG(dev) && !i915.load_detect_test) {
643 status = connector_status_disconnected;
644 goto out;
645 }
646
647 if (!force) {
648 status = connector->status;
649 goto out;
650 }
651
652 drm_modeset_acquire_init(&ctx, 0);
653
654 /* for pre-945g platforms use load detect */
655 if (intel_get_load_detect_pipe(connector, NULL, &tmp, &ctx)) {
656 if (intel_crt_detect_ddc(connector))
657 status = connector_status_connected;
658 else if (INTEL_INFO(dev)->gen < 4)
659 status = intel_crt_load_detect(crt,
660 to_intel_crtc(connector->state->crtc)->pipe);
661 else
662 status = connector_status_unknown;
663 intel_release_load_detect_pipe(connector, &tmp, &ctx);
664 } else
665 status = connector_status_unknown;
666
667 drm_modeset_drop_locks(&ctx);
668 drm_modeset_acquire_fini(&ctx);
669
670out:
671 intel_display_power_put(dev_priv, power_domain);
672 return status;
673}
674
675static void intel_crt_destroy(struct drm_connector *connector)
676{
677 drm_connector_cleanup(connector);
678 kfree(connector);
679}
680
681static int intel_crt_get_modes(struct drm_connector *connector)
682{
683 struct drm_device *dev = connector->dev;
684 struct drm_i915_private *dev_priv = dev->dev_private;
685 struct intel_crt *crt = intel_attached_crt(connector);
686 struct intel_encoder *intel_encoder = &crt->base;
687 enum intel_display_power_domain power_domain;
688 int ret;
689 struct i2c_adapter *i2c;
690
691 power_domain = intel_display_port_power_domain(intel_encoder);
692 intel_display_power_get(dev_priv, power_domain);
693
694 i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
695 ret = intel_crt_ddc_get_modes(connector, i2c);
696 if (ret || !IS_G4X(dev))
697 goto out;
698
699 /* Try to probe digital port for output in DVI-I -> VGA mode. */
700 i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPB);
701 ret = intel_crt_ddc_get_modes(connector, i2c);
702
703out:
704 intel_display_power_put(dev_priv, power_domain);
705
706 return ret;
707}
708
709static int intel_crt_set_property(struct drm_connector *connector,
710 struct drm_property *property,
711 uint64_t value)
712{
713 return 0;
714}
715
716static void intel_crt_reset(struct drm_connector *connector)
717{
718 struct drm_device *dev = connector->dev;
719 struct drm_i915_private *dev_priv = dev->dev_private;
720 struct intel_crt *crt = intel_attached_crt(connector);
721
722 if (INTEL_INFO(dev)->gen >= 5) {
723 u32 adpa;
724
725 adpa = I915_READ(crt->adpa_reg);
726 adpa &= ~ADPA_CRT_HOTPLUG_MASK;
727 adpa |= ADPA_HOTPLUG_BITS;
728 I915_WRITE(crt->adpa_reg, adpa);
729 POSTING_READ(crt->adpa_reg);
730
731 DRM_DEBUG_KMS("crt adpa set to 0x%x\n", adpa);
732 crt->force_hotplug_required = 1;
733 }
734
735}
736
737/*
738 * Routines for controlling stuff on the analog port
739 */
740
741static const struct drm_connector_funcs intel_crt_connector_funcs = {
742 .reset = intel_crt_reset,
743 .dpms = drm_atomic_helper_connector_dpms,
744 .detect = intel_crt_detect,
745 .fill_modes = drm_helper_probe_single_connector_modes,
746 .destroy = intel_crt_destroy,
747 .set_property = intel_crt_set_property,
748 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
749 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
750 .atomic_get_property = intel_connector_atomic_get_property,
751};
752
753static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
754 .mode_valid = intel_crt_mode_valid,
755 .get_modes = intel_crt_get_modes,
756 .best_encoder = intel_best_encoder,
757};
758
759static const struct drm_encoder_funcs intel_crt_enc_funcs = {
760 .destroy = intel_encoder_destroy,
761};
762
763static int intel_no_crt_dmi_callback(const struct dmi_system_id *id)
764{
765 DRM_INFO("Skipping CRT initialization for %s\n", id->ident);
766 return 1;
767}
768
769static const struct dmi_system_id intel_no_crt[] = {
770 {
771 .callback = intel_no_crt_dmi_callback,
772 .ident = "ACER ZGB",
773 .matches = {
774 DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
775 DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
776 },
777 },
778 {
779 .callback = intel_no_crt_dmi_callback,
780 .ident = "DELL XPS 8700",
781 .matches = {
782 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
783 DMI_MATCH(DMI_PRODUCT_NAME, "XPS 8700"),
784 },
785 },
786 { }
787};
788
789void intel_crt_init(struct drm_device *dev)
790{
791 struct drm_connector *connector;
792 struct intel_crt *crt;
793 struct intel_connector *intel_connector;
794 struct drm_i915_private *dev_priv = dev->dev_private;
795 i915_reg_t adpa_reg;
796 u32 adpa;
797
798 /* Skip machines without VGA that falsely report hotplug events */
799 if (dmi_check_system(intel_no_crt))
800 return;
801
802 if (HAS_PCH_SPLIT(dev))
803 adpa_reg = PCH_ADPA;
804 else if (IS_VALLEYVIEW(dev))
805 adpa_reg = VLV_ADPA;
806 else
807 adpa_reg = ADPA;
808
809 adpa = I915_READ(adpa_reg);
810 if ((adpa & ADPA_DAC_ENABLE) == 0) {
811 /*
812 * On some machines (some IVB at least) CRT can be
813 * fused off, but there's no known fuse bit to
814 * indicate that. On these machine the ADPA register
815 * works normally, except the DAC enable bit won't
816 * take. So the only way to tell is attempt to enable
817 * it and see what happens.
818 */
819 I915_WRITE(adpa_reg, adpa | ADPA_DAC_ENABLE |
820 ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
821 if ((I915_READ(adpa_reg) & ADPA_DAC_ENABLE) == 0)
822 return;
823 I915_WRITE(adpa_reg, adpa);
824 }
825
826 crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
827 if (!crt)
828 return;
829
830 intel_connector = intel_connector_alloc();
831 if (!intel_connector) {
832 kfree(crt);
833 return;
834 }
835
836 connector = &intel_connector->base;
837 crt->connector = intel_connector;
838 drm_connector_init(dev, &intel_connector->base,
839 &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
840
841 drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
842 DRM_MODE_ENCODER_DAC, NULL);
843
844 intel_connector_attach_encoder(intel_connector, &crt->base);
845
846 crt->base.type = INTEL_OUTPUT_ANALOG;
847 crt->base.cloneable = (1 << INTEL_OUTPUT_DVO) | (1 << INTEL_OUTPUT_HDMI);
848 if (IS_I830(dev))
849 crt->base.crtc_mask = (1 << 0);
850 else
851 crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
852
853 if (IS_GEN2(dev))
854 connector->interlace_allowed = 0;
855 else
856 connector->interlace_allowed = 1;
857 connector->doublescan_allowed = 0;
858
859 crt->adpa_reg = adpa_reg;
860
861 crt->base.compute_config = intel_crt_compute_config;
862 if (HAS_PCH_SPLIT(dev)) {
863 crt->base.disable = pch_disable_crt;
864 crt->base.post_disable = pch_post_disable_crt;
865 } else {
866 crt->base.disable = intel_disable_crt;
867 }
868 crt->base.enable = intel_enable_crt;
869 if (I915_HAS_HOTPLUG(dev))
870 crt->base.hpd_pin = HPD_CRT;
871 if (HAS_DDI(dev)) {
872 crt->base.get_config = hsw_crt_get_config;
873 crt->base.get_hw_state = intel_ddi_get_hw_state;
874 } else {
875 crt->base.get_config = intel_crt_get_config;
876 crt->base.get_hw_state = intel_crt_get_hw_state;
877 }
878 intel_connector->get_hw_state = intel_connector_get_hw_state;
879 intel_connector->unregister = intel_connector_unregister;
880
881 drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
882
883 drm_connector_register(connector);
884
885 if (!I915_HAS_HOTPLUG(dev))
886 intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
887
888 /*
889 * Configure the automatic hotplug detection stuff
890 */
891 crt->force_hotplug_required = 0;
892
893 /*
894 * TODO: find a proper way to discover whether we need to set the the
895 * polarity and link reversal bits or not, instead of relying on the
896 * BIOS.
897 */
898 if (HAS_PCH_LPT(dev)) {
899 u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT |
900 FDI_RX_LINK_REVERSAL_OVERRIDE;
901
902 dev_priv->fdi_rx_config = I915_READ(FDI_RX_CTL(PIPE_A)) & fdi_config;
903 }
904
905 intel_crt_reset(connector);
906}
1/*
2 * Copyright © 2006-2007 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
22 *
23 * Authors:
24 * Eric Anholt <eric@anholt.net>
25 */
26
27#include <linux/dmi.h>
28#include <linux/i2c.h>
29#include <linux/slab.h>
30#include <drm/drmP.h>
31#include <drm/drm_atomic_helper.h>
32#include <drm/drm_crtc.h>
33#include <drm/drm_crtc_helper.h>
34#include <drm/drm_edid.h>
35#include "intel_drv.h"
36#include <drm/i915_drm.h>
37#include "i915_drv.h"
38
39/* Here's the desired hotplug mode */
40#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \
41 ADPA_CRT_HOTPLUG_WARMUP_10MS | \
42 ADPA_CRT_HOTPLUG_SAMPLE_4S | \
43 ADPA_CRT_HOTPLUG_VOLTAGE_50 | \
44 ADPA_CRT_HOTPLUG_VOLREF_325MV | \
45 ADPA_CRT_HOTPLUG_ENABLE)
46
47struct intel_crt {
48 struct intel_encoder base;
49 /* DPMS state is stored in the connector, which we need in the
50 * encoder's enable/disable callbacks */
51 struct intel_connector *connector;
52 bool force_hotplug_required;
53 i915_reg_t adpa_reg;
54};
55
56static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
57{
58 return container_of(encoder, struct intel_crt, base);
59}
60
61static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
62{
63 return intel_encoder_to_crt(intel_attached_encoder(connector));
64}
65
66static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
67 enum pipe *pipe)
68{
69 struct drm_device *dev = encoder->base.dev;
70 struct drm_i915_private *dev_priv = to_i915(dev);
71 struct intel_crt *crt = intel_encoder_to_crt(encoder);
72 enum intel_display_power_domain power_domain;
73 u32 tmp;
74 bool ret;
75
76 power_domain = intel_display_port_power_domain(encoder);
77 if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
78 return false;
79
80 ret = false;
81
82 tmp = I915_READ(crt->adpa_reg);
83
84 if (!(tmp & ADPA_DAC_ENABLE))
85 goto out;
86
87 if (HAS_PCH_CPT(dev_priv))
88 *pipe = PORT_TO_PIPE_CPT(tmp);
89 else
90 *pipe = PORT_TO_PIPE(tmp);
91
92 ret = true;
93out:
94 intel_display_power_put(dev_priv, power_domain);
95
96 return ret;
97}
98
99static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
100{
101 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
102 struct intel_crt *crt = intel_encoder_to_crt(encoder);
103 u32 tmp, flags = 0;
104
105 tmp = I915_READ(crt->adpa_reg);
106
107 if (tmp & ADPA_HSYNC_ACTIVE_HIGH)
108 flags |= DRM_MODE_FLAG_PHSYNC;
109 else
110 flags |= DRM_MODE_FLAG_NHSYNC;
111
112 if (tmp & ADPA_VSYNC_ACTIVE_HIGH)
113 flags |= DRM_MODE_FLAG_PVSYNC;
114 else
115 flags |= DRM_MODE_FLAG_NVSYNC;
116
117 return flags;
118}
119
120static void intel_crt_get_config(struct intel_encoder *encoder,
121 struct intel_crtc_state *pipe_config)
122{
123 pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);
124
125 pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock;
126}
127
128static void hsw_crt_get_config(struct intel_encoder *encoder,
129 struct intel_crtc_state *pipe_config)
130{
131 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
132
133 intel_ddi_get_config(encoder, pipe_config);
134
135 pipe_config->base.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
136 DRM_MODE_FLAG_NHSYNC |
137 DRM_MODE_FLAG_PVSYNC |
138 DRM_MODE_FLAG_NVSYNC);
139 pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);
140
141 pipe_config->base.adjusted_mode.crtc_clock = lpt_get_iclkip(dev_priv);
142}
143
144/* Note: The caller is required to filter out dpms modes not supported by the
145 * platform. */
146static void intel_crt_set_dpms(struct intel_encoder *encoder,
147 struct intel_crtc_state *crtc_state,
148 int mode)
149{
150 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
151 struct intel_crt *crt = intel_encoder_to_crt(encoder);
152 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
153 const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode;
154 u32 adpa;
155
156 if (INTEL_GEN(dev_priv) >= 5)
157 adpa = ADPA_HOTPLUG_BITS;
158 else
159 adpa = 0;
160
161 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
162 adpa |= ADPA_HSYNC_ACTIVE_HIGH;
163 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
164 adpa |= ADPA_VSYNC_ACTIVE_HIGH;
165
166 /* For CPT allow 3 pipe config, for others just use A or B */
167 if (HAS_PCH_LPT(dev_priv))
168 ; /* Those bits don't exist here */
169 else if (HAS_PCH_CPT(dev_priv))
170 adpa |= PORT_TRANS_SEL_CPT(crtc->pipe);
171 else if (crtc->pipe == 0)
172 adpa |= ADPA_PIPE_A_SELECT;
173 else
174 adpa |= ADPA_PIPE_B_SELECT;
175
176 if (!HAS_PCH_SPLIT(dev_priv))
177 I915_WRITE(BCLRPAT(crtc->pipe), 0);
178
179 switch (mode) {
180 case DRM_MODE_DPMS_ON:
181 adpa |= ADPA_DAC_ENABLE;
182 break;
183 case DRM_MODE_DPMS_STANDBY:
184 adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
185 break;
186 case DRM_MODE_DPMS_SUSPEND:
187 adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
188 break;
189 case DRM_MODE_DPMS_OFF:
190 adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
191 break;
192 }
193
194 I915_WRITE(crt->adpa_reg, adpa);
195}
196
197static void intel_disable_crt(struct intel_encoder *encoder,
198 struct intel_crtc_state *old_crtc_state,
199 struct drm_connector_state *old_conn_state)
200{
201 intel_crt_set_dpms(encoder, old_crtc_state, DRM_MODE_DPMS_OFF);
202}
203
204static void pch_disable_crt(struct intel_encoder *encoder,
205 struct intel_crtc_state *old_crtc_state,
206 struct drm_connector_state *old_conn_state)
207{
208}
209
210static void pch_post_disable_crt(struct intel_encoder *encoder,
211 struct intel_crtc_state *old_crtc_state,
212 struct drm_connector_state *old_conn_state)
213{
214 intel_disable_crt(encoder, old_crtc_state, old_conn_state);
215}
216
217static void hsw_post_disable_crt(struct intel_encoder *encoder,
218 struct intel_crtc_state *old_crtc_state,
219 struct drm_connector_state *old_conn_state)
220{
221 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
222
223 pch_post_disable_crt(encoder, old_crtc_state, old_conn_state);
224
225 lpt_disable_pch_transcoder(dev_priv);
226 lpt_disable_iclkip(dev_priv);
227
228 intel_ddi_fdi_post_disable(encoder, old_crtc_state, old_conn_state);
229}
230
231static void intel_enable_crt(struct intel_encoder *encoder,
232 struct intel_crtc_state *pipe_config,
233 struct drm_connector_state *conn_state)
234{
235 intel_crt_set_dpms(encoder, pipe_config, DRM_MODE_DPMS_ON);
236}
237
238static enum drm_mode_status
239intel_crt_mode_valid(struct drm_connector *connector,
240 struct drm_display_mode *mode)
241{
242 struct drm_device *dev = connector->dev;
243 struct drm_i915_private *dev_priv = to_i915(dev);
244 int max_dotclk = dev_priv->max_dotclk_freq;
245 int max_clock;
246
247 if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
248 return MODE_NO_DBLESCAN;
249
250 if (mode->clock < 25000)
251 return MODE_CLOCK_LOW;
252
253 if (HAS_PCH_LPT(dev_priv))
254 max_clock = 180000;
255 else if (IS_VALLEYVIEW(dev_priv))
256 /*
257 * 270 MHz due to current DPLL limits,
258 * DAC limit supposedly 355 MHz.
259 */
260 max_clock = 270000;
261 else if (IS_GEN3(dev_priv) || IS_GEN4(dev_priv))
262 max_clock = 400000;
263 else
264 max_clock = 350000;
265 if (mode->clock > max_clock)
266 return MODE_CLOCK_HIGH;
267
268 if (mode->clock > max_dotclk)
269 return MODE_CLOCK_HIGH;
270
271 /* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */
272 if (HAS_PCH_LPT(dev_priv) &&
273 (ironlake_get_lanes_required(mode->clock, 270000, 24) > 2))
274 return MODE_CLOCK_HIGH;
275
276 return MODE_OK;
277}
278
279static bool intel_crt_compute_config(struct intel_encoder *encoder,
280 struct intel_crtc_state *pipe_config,
281 struct drm_connector_state *conn_state)
282{
283 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
284
285 if (HAS_PCH_SPLIT(dev_priv))
286 pipe_config->has_pch_encoder = true;
287
288 /* LPT FDI RX only supports 8bpc. */
289 if (HAS_PCH_LPT(dev_priv)) {
290 if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) {
291 DRM_DEBUG_KMS("LPT only supports 24bpp\n");
292 return false;
293 }
294
295 pipe_config->pipe_bpp = 24;
296 }
297
298 /* FDI must always be 2.7 GHz */
299 if (HAS_DDI(dev_priv))
300 pipe_config->port_clock = 135000 * 2;
301
302 return true;
303}
304
305static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
306{
307 struct drm_device *dev = connector->dev;
308 struct intel_crt *crt = intel_attached_crt(connector);
309 struct drm_i915_private *dev_priv = to_i915(dev);
310 u32 adpa;
311 bool ret;
312
313 /* The first time through, trigger an explicit detection cycle */
314 if (crt->force_hotplug_required) {
315 bool turn_off_dac = HAS_PCH_SPLIT(dev_priv);
316 u32 save_adpa;
317
318 crt->force_hotplug_required = 0;
319
320 save_adpa = adpa = I915_READ(crt->adpa_reg);
321 DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
322
323 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
324 if (turn_off_dac)
325 adpa &= ~ADPA_DAC_ENABLE;
326
327 I915_WRITE(crt->adpa_reg, adpa);
328
329 if (intel_wait_for_register(dev_priv,
330 crt->adpa_reg,
331 ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 0,
332 1000))
333 DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
334
335 if (turn_off_dac) {
336 I915_WRITE(crt->adpa_reg, save_adpa);
337 POSTING_READ(crt->adpa_reg);
338 }
339 }
340
341 /* Check the status to see if both blue and green are on now */
342 adpa = I915_READ(crt->adpa_reg);
343 if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
344 ret = true;
345 else
346 ret = false;
347 DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
348
349 return ret;
350}
351
352static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
353{
354 struct drm_device *dev = connector->dev;
355 struct intel_crt *crt = intel_attached_crt(connector);
356 struct drm_i915_private *dev_priv = to_i915(dev);
357 bool reenable_hpd;
358 u32 adpa;
359 bool ret;
360 u32 save_adpa;
361
362 /*
363 * Doing a force trigger causes a hpd interrupt to get sent, which can
364 * get us stuck in a loop if we're polling:
365 * - We enable power wells and reset the ADPA
366 * - output_poll_exec does force probe on VGA, triggering a hpd
367 * - HPD handler waits for poll to unlock dev->mode_config.mutex
368 * - output_poll_exec shuts off the ADPA, unlocks
369 * dev->mode_config.mutex
370 * - HPD handler runs, resets ADPA and brings us back to the start
371 *
372 * Just disable HPD interrupts here to prevent this
373 */
374 reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin);
375
376 save_adpa = adpa = I915_READ(crt->adpa_reg);
377 DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
378
379 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
380
381 I915_WRITE(crt->adpa_reg, adpa);
382
383 if (intel_wait_for_register(dev_priv,
384 crt->adpa_reg,
385 ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 0,
386 1000)) {
387 DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
388 I915_WRITE(crt->adpa_reg, save_adpa);
389 }
390
391 /* Check the status to see if both blue and green are on now */
392 adpa = I915_READ(crt->adpa_reg);
393 if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
394 ret = true;
395 else
396 ret = false;
397
398 DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
399
400 if (reenable_hpd)
401 intel_hpd_enable(dev_priv, crt->base.hpd_pin);
402
403 return ret;
404}
405
406/**
407 * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
408 *
409 * Not for i915G/i915GM
410 *
411 * \return true if CRT is connected.
412 * \return false if CRT is disconnected.
413 */
414static bool intel_crt_detect_hotplug(struct drm_connector *connector)
415{
416 struct drm_device *dev = connector->dev;
417 struct drm_i915_private *dev_priv = to_i915(dev);
418 u32 stat;
419 bool ret = false;
420 int i, tries = 0;
421
422 if (HAS_PCH_SPLIT(dev_priv))
423 return intel_ironlake_crt_detect_hotplug(connector);
424
425 if (IS_VALLEYVIEW(dev_priv))
426 return valleyview_crt_detect_hotplug(connector);
427
428 /*
429 * On 4 series desktop, CRT detect sequence need to be done twice
430 * to get a reliable result.
431 */
432
433 if (IS_G4X(dev_priv) && !IS_GM45(dev_priv))
434 tries = 2;
435 else
436 tries = 1;
437
438 for (i = 0; i < tries ; i++) {
439 /* turn on the FORCE_DETECT */
440 i915_hotplug_interrupt_update(dev_priv,
441 CRT_HOTPLUG_FORCE_DETECT,
442 CRT_HOTPLUG_FORCE_DETECT);
443 /* wait for FORCE_DETECT to go off */
444 if (intel_wait_for_register(dev_priv, PORT_HOTPLUG_EN,
445 CRT_HOTPLUG_FORCE_DETECT, 0,
446 1000))
447 DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
448 }
449
450 stat = I915_READ(PORT_HOTPLUG_STAT);
451 if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
452 ret = true;
453
454 /* clear the interrupt we just generated, if any */
455 I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
456
457 i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, 0);
458
459 return ret;
460}
461
462static struct edid *intel_crt_get_edid(struct drm_connector *connector,
463 struct i2c_adapter *i2c)
464{
465 struct edid *edid;
466
467 edid = drm_get_edid(connector, i2c);
468
469 if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
470 DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");
471 intel_gmbus_force_bit(i2c, true);
472 edid = drm_get_edid(connector, i2c);
473 intel_gmbus_force_bit(i2c, false);
474 }
475
476 return edid;
477}
478
479/* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */
480static int intel_crt_ddc_get_modes(struct drm_connector *connector,
481 struct i2c_adapter *adapter)
482{
483 struct edid *edid;
484 int ret;
485
486 edid = intel_crt_get_edid(connector, adapter);
487 if (!edid)
488 return 0;
489
490 ret = intel_connector_update_modes(connector, edid);
491 kfree(edid);
492
493 return ret;
494}
495
496static bool intel_crt_detect_ddc(struct drm_connector *connector)
497{
498 struct intel_crt *crt = intel_attached_crt(connector);
499 struct drm_i915_private *dev_priv = to_i915(crt->base.base.dev);
500 struct edid *edid;
501 struct i2c_adapter *i2c;
502 bool ret = false;
503
504 BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG);
505
506 i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
507 edid = intel_crt_get_edid(connector, i2c);
508
509 if (edid) {
510 bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
511
512 /*
513 * This may be a DVI-I connector with a shared DDC
514 * link between analog and digital outputs, so we
515 * have to check the EDID input spec of the attached device.
516 */
517 if (!is_digital) {
518 DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
519 ret = true;
520 } else {
521 DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
522 }
523 } else {
524 DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [no valid EDID found]\n");
525 }
526
527 kfree(edid);
528
529 return ret;
530}
531
532static enum drm_connector_status
533intel_crt_load_detect(struct intel_crt *crt, uint32_t pipe)
534{
535 struct drm_device *dev = crt->base.base.dev;
536 struct drm_i915_private *dev_priv = to_i915(dev);
537 uint32_t save_bclrpat;
538 uint32_t save_vtotal;
539 uint32_t vtotal, vactive;
540 uint32_t vsample;
541 uint32_t vblank, vblank_start, vblank_end;
542 uint32_t dsl;
543 i915_reg_t bclrpat_reg, vtotal_reg,
544 vblank_reg, vsync_reg, pipeconf_reg, pipe_dsl_reg;
545 uint8_t st00;
546 enum drm_connector_status status;
547
548 DRM_DEBUG_KMS("starting load-detect on CRT\n");
549
550 bclrpat_reg = BCLRPAT(pipe);
551 vtotal_reg = VTOTAL(pipe);
552 vblank_reg = VBLANK(pipe);
553 vsync_reg = VSYNC(pipe);
554 pipeconf_reg = PIPECONF(pipe);
555 pipe_dsl_reg = PIPEDSL(pipe);
556
557 save_bclrpat = I915_READ(bclrpat_reg);
558 save_vtotal = I915_READ(vtotal_reg);
559 vblank = I915_READ(vblank_reg);
560
561 vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
562 vactive = (save_vtotal & 0x7ff) + 1;
563
564 vblank_start = (vblank & 0xfff) + 1;
565 vblank_end = ((vblank >> 16) & 0xfff) + 1;
566
567 /* Set the border color to purple. */
568 I915_WRITE(bclrpat_reg, 0x500050);
569
570 if (!IS_GEN2(dev_priv)) {
571 uint32_t pipeconf = I915_READ(pipeconf_reg);
572 I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
573 POSTING_READ(pipeconf_reg);
574 /* Wait for next Vblank to substitue
575 * border color for Color info */
576 intel_wait_for_vblank(dev_priv, pipe);
577 st00 = I915_READ8(_VGA_MSR_WRITE);
578 status = ((st00 & (1 << 4)) != 0) ?
579 connector_status_connected :
580 connector_status_disconnected;
581
582 I915_WRITE(pipeconf_reg, pipeconf);
583 } else {
584 bool restore_vblank = false;
585 int count, detect;
586
587 /*
588 * If there isn't any border, add some.
589 * Yes, this will flicker
590 */
591 if (vblank_start <= vactive && vblank_end >= vtotal) {
592 uint32_t vsync = I915_READ(vsync_reg);
593 uint32_t vsync_start = (vsync & 0xffff) + 1;
594
595 vblank_start = vsync_start;
596 I915_WRITE(vblank_reg,
597 (vblank_start - 1) |
598 ((vblank_end - 1) << 16));
599 restore_vblank = true;
600 }
601 /* sample in the vertical border, selecting the larger one */
602 if (vblank_start - vactive >= vtotal - vblank_end)
603 vsample = (vblank_start + vactive) >> 1;
604 else
605 vsample = (vtotal + vblank_end) >> 1;
606
607 /*
608 * Wait for the border to be displayed
609 */
610 while (I915_READ(pipe_dsl_reg) >= vactive)
611 ;
612 while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
613 ;
614 /*
615 * Watch ST00 for an entire scanline
616 */
617 detect = 0;
618 count = 0;
619 do {
620 count++;
621 /* Read the ST00 VGA status register */
622 st00 = I915_READ8(_VGA_MSR_WRITE);
623 if (st00 & (1 << 4))
624 detect++;
625 } while ((I915_READ(pipe_dsl_reg) == dsl));
626
627 /* restore vblank if necessary */
628 if (restore_vblank)
629 I915_WRITE(vblank_reg, vblank);
630 /*
631 * If more than 3/4 of the scanline detected a monitor,
632 * then it is assumed to be present. This works even on i830,
633 * where there isn't any way to force the border color across
634 * the screen
635 */
636 status = detect * 4 > count * 3 ?
637 connector_status_connected :
638 connector_status_disconnected;
639 }
640
641 /* Restore previous settings */
642 I915_WRITE(bclrpat_reg, save_bclrpat);
643
644 return status;
645}
646
647static int intel_spurious_crt_detect_dmi_callback(const struct dmi_system_id *id)
648{
649 DRM_DEBUG_DRIVER("Skipping CRT detection for %s\n", id->ident);
650 return 1;
651}
652
653static const struct dmi_system_id intel_spurious_crt_detect[] = {
654 {
655 .callback = intel_spurious_crt_detect_dmi_callback,
656 .ident = "ACER ZGB",
657 .matches = {
658 DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
659 DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
660 },
661 },
662 {
663 .callback = intel_spurious_crt_detect_dmi_callback,
664 .ident = "Intel DZ77BH-55K",
665 .matches = {
666 DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
667 DMI_MATCH(DMI_BOARD_NAME, "DZ77BH-55K"),
668 },
669 },
670 { }
671};
672
673static enum drm_connector_status
674intel_crt_detect(struct drm_connector *connector, bool force)
675{
676 struct drm_i915_private *dev_priv = to_i915(connector->dev);
677 struct intel_crt *crt = intel_attached_crt(connector);
678 struct intel_encoder *intel_encoder = &crt->base;
679 enum intel_display_power_domain power_domain;
680 enum drm_connector_status status;
681 struct intel_load_detect_pipe tmp;
682 struct drm_modeset_acquire_ctx ctx;
683
684 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
685 connector->base.id, connector->name,
686 force);
687
688 /* Skip machines without VGA that falsely report hotplug events */
689 if (dmi_check_system(intel_spurious_crt_detect))
690 return connector_status_disconnected;
691
692 power_domain = intel_display_port_power_domain(intel_encoder);
693 intel_display_power_get(dev_priv, power_domain);
694
695 if (I915_HAS_HOTPLUG(dev_priv)) {
696 /* We can not rely on the HPD pin always being correctly wired
697 * up, for example many KVM do not pass it through, and so
698 * only trust an assertion that the monitor is connected.
699 */
700 if (intel_crt_detect_hotplug(connector)) {
701 DRM_DEBUG_KMS("CRT detected via hotplug\n");
702 status = connector_status_connected;
703 goto out;
704 } else
705 DRM_DEBUG_KMS("CRT not detected via hotplug\n");
706 }
707
708 if (intel_crt_detect_ddc(connector)) {
709 status = connector_status_connected;
710 goto out;
711 }
712
713 /* Load detection is broken on HPD capable machines. Whoever wants a
714 * broken monitor (without edid) to work behind a broken kvm (that fails
715 * to have the right resistors for HP detection) needs to fix this up.
716 * For now just bail out. */
717 if (I915_HAS_HOTPLUG(dev_priv) && !i915.load_detect_test) {
718 status = connector_status_disconnected;
719 goto out;
720 }
721
722 if (!force) {
723 status = connector->status;
724 goto out;
725 }
726
727 drm_modeset_acquire_init(&ctx, 0);
728
729 /* for pre-945g platforms use load detect */
730 if (intel_get_load_detect_pipe(connector, NULL, &tmp, &ctx)) {
731 if (intel_crt_detect_ddc(connector))
732 status = connector_status_connected;
733 else if (INTEL_GEN(dev_priv) < 4)
734 status = intel_crt_load_detect(crt,
735 to_intel_crtc(connector->state->crtc)->pipe);
736 else if (i915.load_detect_test)
737 status = connector_status_disconnected;
738 else
739 status = connector_status_unknown;
740 intel_release_load_detect_pipe(connector, &tmp, &ctx);
741 } else
742 status = connector_status_unknown;
743
744 drm_modeset_drop_locks(&ctx);
745 drm_modeset_acquire_fini(&ctx);
746
747out:
748 intel_display_power_put(dev_priv, power_domain);
749 return status;
750}
751
752static void intel_crt_destroy(struct drm_connector *connector)
753{
754 drm_connector_cleanup(connector);
755 kfree(connector);
756}
757
758static int intel_crt_get_modes(struct drm_connector *connector)
759{
760 struct drm_device *dev = connector->dev;
761 struct drm_i915_private *dev_priv = to_i915(dev);
762 struct intel_crt *crt = intel_attached_crt(connector);
763 struct intel_encoder *intel_encoder = &crt->base;
764 enum intel_display_power_domain power_domain;
765 int ret;
766 struct i2c_adapter *i2c;
767
768 power_domain = intel_display_port_power_domain(intel_encoder);
769 intel_display_power_get(dev_priv, power_domain);
770
771 i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
772 ret = intel_crt_ddc_get_modes(connector, i2c);
773 if (ret || !IS_G4X(dev_priv))
774 goto out;
775
776 /* Try to probe digital port for output in DVI-I -> VGA mode. */
777 i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPB);
778 ret = intel_crt_ddc_get_modes(connector, i2c);
779
780out:
781 intel_display_power_put(dev_priv, power_domain);
782
783 return ret;
784}
785
786static int intel_crt_set_property(struct drm_connector *connector,
787 struct drm_property *property,
788 uint64_t value)
789{
790 return 0;
791}
792
793void intel_crt_reset(struct drm_encoder *encoder)
794{
795 struct drm_i915_private *dev_priv = to_i915(encoder->dev);
796 struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
797
798 if (INTEL_GEN(dev_priv) >= 5) {
799 u32 adpa;
800
801 adpa = I915_READ(crt->adpa_reg);
802 adpa &= ~ADPA_CRT_HOTPLUG_MASK;
803 adpa |= ADPA_HOTPLUG_BITS;
804 I915_WRITE(crt->adpa_reg, adpa);
805 POSTING_READ(crt->adpa_reg);
806
807 DRM_DEBUG_KMS("crt adpa set to 0x%x\n", adpa);
808 crt->force_hotplug_required = 1;
809 }
810
811}
812
813/*
814 * Routines for controlling stuff on the analog port
815 */
816
817static const struct drm_connector_funcs intel_crt_connector_funcs = {
818 .dpms = drm_atomic_helper_connector_dpms,
819 .detect = intel_crt_detect,
820 .fill_modes = drm_helper_probe_single_connector_modes,
821 .late_register = intel_connector_register,
822 .early_unregister = intel_connector_unregister,
823 .destroy = intel_crt_destroy,
824 .set_property = intel_crt_set_property,
825 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
826 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
827 .atomic_get_property = intel_connector_atomic_get_property,
828};
829
830static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
831 .mode_valid = intel_crt_mode_valid,
832 .get_modes = intel_crt_get_modes,
833};
834
835static const struct drm_encoder_funcs intel_crt_enc_funcs = {
836 .reset = intel_crt_reset,
837 .destroy = intel_encoder_destroy,
838};
839
840void intel_crt_init(struct drm_device *dev)
841{
842 struct drm_connector *connector;
843 struct intel_crt *crt;
844 struct intel_connector *intel_connector;
845 struct drm_i915_private *dev_priv = to_i915(dev);
846 i915_reg_t adpa_reg;
847 u32 adpa;
848
849 if (HAS_PCH_SPLIT(dev_priv))
850 adpa_reg = PCH_ADPA;
851 else if (IS_VALLEYVIEW(dev_priv))
852 adpa_reg = VLV_ADPA;
853 else
854 adpa_reg = ADPA;
855
856 adpa = I915_READ(adpa_reg);
857 if ((adpa & ADPA_DAC_ENABLE) == 0) {
858 /*
859 * On some machines (some IVB at least) CRT can be
860 * fused off, but there's no known fuse bit to
861 * indicate that. On these machine the ADPA register
862 * works normally, except the DAC enable bit won't
863 * take. So the only way to tell is attempt to enable
864 * it and see what happens.
865 */
866 I915_WRITE(adpa_reg, adpa | ADPA_DAC_ENABLE |
867 ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
868 if ((I915_READ(adpa_reg) & ADPA_DAC_ENABLE) == 0)
869 return;
870 I915_WRITE(adpa_reg, adpa);
871 }
872
873 crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
874 if (!crt)
875 return;
876
877 intel_connector = intel_connector_alloc();
878 if (!intel_connector) {
879 kfree(crt);
880 return;
881 }
882
883 connector = &intel_connector->base;
884 crt->connector = intel_connector;
885 drm_connector_init(dev, &intel_connector->base,
886 &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
887
888 drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
889 DRM_MODE_ENCODER_DAC, "CRT");
890
891 intel_connector_attach_encoder(intel_connector, &crt->base);
892
893 crt->base.type = INTEL_OUTPUT_ANALOG;
894 crt->base.cloneable = (1 << INTEL_OUTPUT_DVO) | (1 << INTEL_OUTPUT_HDMI);
895 if (IS_I830(dev_priv))
896 crt->base.crtc_mask = (1 << 0);
897 else
898 crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
899
900 if (IS_GEN2(dev_priv))
901 connector->interlace_allowed = 0;
902 else
903 connector->interlace_allowed = 1;
904 connector->doublescan_allowed = 0;
905
906 crt->adpa_reg = adpa_reg;
907
908 crt->base.compute_config = intel_crt_compute_config;
909 if (HAS_PCH_SPLIT(dev_priv)) {
910 crt->base.disable = pch_disable_crt;
911 crt->base.post_disable = pch_post_disable_crt;
912 } else {
913 crt->base.disable = intel_disable_crt;
914 }
915 crt->base.enable = intel_enable_crt;
916 if (I915_HAS_HOTPLUG(dev_priv) &&
917 !dmi_check_system(intel_spurious_crt_detect))
918 crt->base.hpd_pin = HPD_CRT;
919 if (HAS_DDI(dev_priv)) {
920 crt->base.port = PORT_E;
921 crt->base.get_config = hsw_crt_get_config;
922 crt->base.get_hw_state = intel_ddi_get_hw_state;
923 crt->base.post_disable = hsw_post_disable_crt;
924 } else {
925 crt->base.port = PORT_NONE;
926 crt->base.get_config = intel_crt_get_config;
927 crt->base.get_hw_state = intel_crt_get_hw_state;
928 }
929 intel_connector->get_hw_state = intel_connector_get_hw_state;
930
931 drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
932
933 if (!I915_HAS_HOTPLUG(dev_priv))
934 intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
935
936 /*
937 * Configure the automatic hotplug detection stuff
938 */
939 crt->force_hotplug_required = 0;
940
941 /*
942 * TODO: find a proper way to discover whether we need to set the the
943 * polarity and link reversal bits or not, instead of relying on the
944 * BIOS.
945 */
946 if (HAS_PCH_LPT(dev_priv)) {
947 u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT |
948 FDI_RX_LINK_REVERSAL_OVERRIDE;
949
950 dev_priv->fdi_rx_config = I915_READ(FDI_RX_CTL(PIPE_A)) & fdi_config;
951 }
952
953 intel_crt_reset(&crt->base.base);
954}