Linux Audio

Check our new training course

Loading...
v4.6
  1/*
  2 *	Low-Level PCI Support for PC
  3 *
  4 *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
  5 */
  6
  7#include <linux/sched.h>
  8#include <linux/pci.h>
  9#include <linux/pci-acpi.h>
 10#include <linux/ioport.h>
 11#include <linux/init.h>
 12#include <linux/dmi.h>
 13#include <linux/slab.h>
 14
 15#include <asm/acpi.h>
 16#include <asm/segment.h>
 17#include <asm/io.h>
 18#include <asm/smp.h>
 19#include <asm/pci_x86.h>
 20#include <asm/setup.h>
 21
 22unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 23				PCI_PROBE_MMCONF;
 24
 25unsigned int pci_early_dump_regs;
 26static int pci_bf_sort;
 27static int smbios_type_b1_flag;
 28int pci_routeirq;
 29int noioapicquirk;
 30#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 31int noioapicreroute = 0;
 32#else
 33int noioapicreroute = 1;
 34#endif
 35int pcibios_last_bus = -1;
 36unsigned long pirq_table_addr;
 37const struct pci_raw_ops *__read_mostly raw_pci_ops;
 38const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
 39
 40int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 41						int reg, int len, u32 *val)
 42{
 43	if (domain == 0 && reg < 256 && raw_pci_ops)
 44		return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
 45	if (raw_pci_ext_ops)
 46		return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
 47	return -EINVAL;
 48}
 49
 50int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
 51						int reg, int len, u32 val)
 52{
 53	if (domain == 0 && reg < 256 && raw_pci_ops)
 54		return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
 55	if (raw_pci_ext_ops)
 56		return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
 57	return -EINVAL;
 58}
 59
 60static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
 61{
 62	return raw_pci_read(pci_domain_nr(bus), bus->number,
 63				 devfn, where, size, value);
 64}
 65
 66static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
 67{
 68	return raw_pci_write(pci_domain_nr(bus), bus->number,
 69				  devfn, where, size, value);
 70}
 71
 72struct pci_ops pci_root_ops = {
 73	.read = pci_read,
 74	.write = pci_write,
 75};
 76
 77/*
 78 * This interrupt-safe spinlock protects all accesses to PCI
 79 * configuration space.
 80 */
 81DEFINE_RAW_SPINLOCK(pci_config_lock);
 82
 83static int __init can_skip_ioresource_align(const struct dmi_system_id *d)
 84{
 85	pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
 86	printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
 87	return 0;
 88}
 89
 90static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = {
 91/*
 92 * Systems where PCI IO resource ISA alignment can be skipped
 93 * when the ISA enable bit in the bridge control is not set
 94 */
 95	{
 96		.callback = can_skip_ioresource_align,
 97		.ident = "IBM System x3800",
 98		.matches = {
 99			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
100			DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
101		},
102	},
103	{
104		.callback = can_skip_ioresource_align,
105		.ident = "IBM System x3850",
106		.matches = {
107			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
108			DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
109		},
110	},
111	{
112		.callback = can_skip_ioresource_align,
113		.ident = "IBM System x3950",
114		.matches = {
115			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
116			DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
117		},
118	},
119	{}
120};
121
122void __init dmi_check_skip_isa_align(void)
123{
124	dmi_check_system(can_skip_pciprobe_dmi_table);
125}
126
127static void pcibios_fixup_device_resources(struct pci_dev *dev)
128{
129	struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
130	struct resource *bar_r;
131	int bar;
132
133	if (pci_probe & PCI_NOASSIGN_BARS) {
134		/*
135		* If the BIOS did not assign the BAR, zero out the
136		* resource so the kernel doesn't attmept to assign
137		* it later on in pci_assign_unassigned_resources
138		*/
139		for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
140			bar_r = &dev->resource[bar];
141			if (bar_r->start == 0 && bar_r->end != 0) {
142				bar_r->flags = 0;
143				bar_r->end = 0;
144			}
145		}
146	}
147
148	if (pci_probe & PCI_NOASSIGN_ROMS) {
149		if (rom_r->parent)
150			return;
151		if (rom_r->start) {
152			/* we deal with BIOS assigned ROM later */
153			return;
154		}
155		rom_r->start = rom_r->end = rom_r->flags = 0;
156	}
157}
158
159/*
160 *  Called after each bus is probed, but before its children
161 *  are examined.
162 */
163
164void pcibios_fixup_bus(struct pci_bus *b)
165{
166	struct pci_dev *dev;
167
168	pci_read_bridge_bases(b);
169	list_for_each_entry(dev, &b->devices, bus_list)
170		pcibios_fixup_device_resources(dev);
171}
172
173void pcibios_add_bus(struct pci_bus *bus)
174{
175	acpi_pci_add_bus(bus);
176}
177
178void pcibios_remove_bus(struct pci_bus *bus)
179{
180	acpi_pci_remove_bus(bus);
181}
182
183/*
184 * Only use DMI information to set this if nothing was passed
185 * on the kernel command line (which was parsed earlier).
186 */
187
188static int __init set_bf_sort(const struct dmi_system_id *d)
189{
190	if (pci_bf_sort == pci_bf_sort_default) {
191		pci_bf_sort = pci_dmi_bf;
192		printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
193	}
194	return 0;
195}
196
197static void __init read_dmi_type_b1(const struct dmi_header *dm,
198				    void *private_data)
199{
200	u8 *d = (u8 *)dm + 4;
201
202	if (dm->type != 0xB1)
203		return;
204	switch (((*(u32 *)d) >> 9) & 0x03) {
205	case 0x00:
206		printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n");
207		break;
208	case 0x01: /* set pci=bfsort */
209		smbios_type_b1_flag = 1;
210		break;
211	case 0x02: /* do not set pci=bfsort */
212		smbios_type_b1_flag = 2;
213		break;
214	default:
215		break;
216	}
217}
218
219static int __init find_sort_method(const struct dmi_system_id *d)
220{
221	dmi_walk(read_dmi_type_b1, NULL);
222
223	if (smbios_type_b1_flag == 1) {
224		set_bf_sort(d);
225		return 0;
226	}
227	return -1;
228}
229
230/*
231 * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
232 */
233#ifdef __i386__
234static int __init assign_all_busses(const struct dmi_system_id *d)
235{
236	pci_probe |= PCI_ASSIGN_ALL_BUSSES;
237	printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
238			" (pci=assign-busses)\n", d->ident);
239	return 0;
240}
241#endif
242
243static int __init set_scan_all(const struct dmi_system_id *d)
244{
245	printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
246	       d->ident);
247	pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
248	return 0;
249}
250
251static const struct dmi_system_id pciprobe_dmi_table[] __initconst = {
252#ifdef __i386__
253/*
254 * Laptops which need pci=assign-busses to see Cardbus cards
255 */
256	{
257		.callback = assign_all_busses,
258		.ident = "Samsung X20 Laptop",
259		.matches = {
260			DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
261			DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
262		},
263	},
264#endif		/* __i386__ */
265	{
266		.callback = set_bf_sort,
267		.ident = "Dell PowerEdge 1950",
268		.matches = {
269			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
270			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
271		},
272	},
273	{
274		.callback = set_bf_sort,
275		.ident = "Dell PowerEdge 1955",
276		.matches = {
277			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
278			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
279		},
280	},
281	{
282		.callback = set_bf_sort,
283		.ident = "Dell PowerEdge 2900",
284		.matches = {
285			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
286			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
287		},
288	},
289	{
290		.callback = set_bf_sort,
291		.ident = "Dell PowerEdge 2950",
292		.matches = {
293			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
294			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
295		},
296	},
297	{
298		.callback = set_bf_sort,
299		.ident = "Dell PowerEdge R900",
300		.matches = {
301			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
302			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
303		},
304	},
305	{
306		.callback = find_sort_method,
307		.ident = "Dell System",
308		.matches = {
309			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
310		},
311	},
312	{
313		.callback = set_bf_sort,
314		.ident = "HP ProLiant BL20p G3",
315		.matches = {
316			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
317			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
318		},
319	},
320	{
321		.callback = set_bf_sort,
322		.ident = "HP ProLiant BL20p G4",
323		.matches = {
324			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
325			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
326		},
327	},
328	{
329		.callback = set_bf_sort,
330		.ident = "HP ProLiant BL30p G1",
331		.matches = {
332			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
333			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
334		},
335	},
336	{
337		.callback = set_bf_sort,
338		.ident = "HP ProLiant BL25p G1",
339		.matches = {
340			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
341			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
342		},
343	},
344	{
345		.callback = set_bf_sort,
346		.ident = "HP ProLiant BL35p G1",
347		.matches = {
348			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
349			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
350		},
351	},
352	{
353		.callback = set_bf_sort,
354		.ident = "HP ProLiant BL45p G1",
355		.matches = {
356			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
357			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
358		},
359	},
360	{
361		.callback = set_bf_sort,
362		.ident = "HP ProLiant BL45p G2",
363		.matches = {
364			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
365			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
366		},
367	},
368	{
369		.callback = set_bf_sort,
370		.ident = "HP ProLiant BL460c G1",
371		.matches = {
372			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
373			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
374		},
375	},
376	{
377		.callback = set_bf_sort,
378		.ident = "HP ProLiant BL465c G1",
379		.matches = {
380			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
381			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
382		},
383	},
384	{
385		.callback = set_bf_sort,
386		.ident = "HP ProLiant BL480c G1",
387		.matches = {
388			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
389			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
390		},
391	},
392	{
393		.callback = set_bf_sort,
394		.ident = "HP ProLiant BL685c G1",
395		.matches = {
396			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
397			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
398		},
399	},
400	{
401		.callback = set_bf_sort,
402		.ident = "HP ProLiant DL360",
403		.matches = {
404			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
405			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
406		},
407	},
408	{
409		.callback = set_bf_sort,
410		.ident = "HP ProLiant DL380",
411		.matches = {
412			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
413			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
414		},
415	},
416#ifdef __i386__
417	{
418		.callback = assign_all_busses,
419		.ident = "Compaq EVO N800c",
420		.matches = {
421			DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
422			DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
423		},
424	},
425#endif
426	{
427		.callback = set_bf_sort,
428		.ident = "HP ProLiant DL385 G2",
429		.matches = {
430			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
431			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
432		},
433	},
434	{
435		.callback = set_bf_sort,
436		.ident = "HP ProLiant DL585 G2",
437		.matches = {
438			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
439			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
440		},
441	},
442	{
443		.callback = set_scan_all,
444		.ident = "Stratus/NEC ftServer",
445		.matches = {
446			DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
447			DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
448		},
449	},
450        {
451                .callback = set_scan_all,
452                .ident = "Stratus/NEC ftServer",
453                .matches = {
454                        DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
455                        DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"),
456                },
457        },
458        {
459                .callback = set_scan_all,
460                .ident = "Stratus/NEC ftServer",
461                .matches = {
462                        DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
463                        DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"),
464                },
465        },
466	{}
467};
468
469void __init dmi_check_pciprobe(void)
470{
471	dmi_check_system(pciprobe_dmi_table);
472}
473
474void pcibios_scan_root(int busnum)
475{
476	struct pci_bus *bus;
477	struct pci_sysdata *sd;
478	LIST_HEAD(resources);
479
480	sd = kzalloc(sizeof(*sd), GFP_KERNEL);
481	if (!sd) {
482		printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
483		return;
484	}
485	sd->node = x86_pci_root_bus_node(busnum);
486	x86_pci_root_bus_resources(busnum, &resources);
487	printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
488	bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
489	if (!bus) {
490		pci_free_resource_list(&resources);
491		kfree(sd);
492		return;
493	}
494	pci_bus_add_devices(bus);
495}
496
497void __init pcibios_set_cache_line_size(void)
498{
499	struct cpuinfo_x86 *c = &boot_cpu_data;
500
501	/*
502	 * Set PCI cacheline size to that of the CPU if the CPU has reported it.
503	 * (For older CPUs that don't support cpuid, we se it to 32 bytes
504	 * It's also good for 386/486s (which actually have 16)
505	 * as quite a few PCI devices do not support smaller values.
506	 */
507	if (c->x86_clflush_size > 0) {
508		pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
509		printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
510			pci_dfl_cache_line_size << 2);
511	} else {
512 		pci_dfl_cache_line_size = 32 >> 2;
513		printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
514	}
515}
516
517int __init pcibios_init(void)
518{
519	if (!raw_pci_ops) {
520		printk(KERN_WARNING "PCI: System does not support PCI\n");
521		return 0;
522	}
523
524	pcibios_set_cache_line_size();
525	pcibios_resource_survey();
526
527	if (pci_bf_sort >= pci_force_bf)
528		pci_sort_breadthfirst();
529	return 0;
530}
531
532char *__init pcibios_setup(char *str)
533{
534	if (!strcmp(str, "off")) {
535		pci_probe = 0;
536		return NULL;
537	} else if (!strcmp(str, "bfsort")) {
538		pci_bf_sort = pci_force_bf;
539		return NULL;
540	} else if (!strcmp(str, "nobfsort")) {
541		pci_bf_sort = pci_force_nobf;
542		return NULL;
543	}
544#ifdef CONFIG_PCI_BIOS
545	else if (!strcmp(str, "bios")) {
546		pci_probe = PCI_PROBE_BIOS;
547		return NULL;
548	} else if (!strcmp(str, "nobios")) {
549		pci_probe &= ~PCI_PROBE_BIOS;
550		return NULL;
551	} else if (!strcmp(str, "biosirq")) {
552		pci_probe |= PCI_BIOS_IRQ_SCAN;
553		return NULL;
554	} else if (!strncmp(str, "pirqaddr=", 9)) {
555		pirq_table_addr = simple_strtoul(str+9, NULL, 0);
556		return NULL;
557	}
558#endif
559#ifdef CONFIG_PCI_DIRECT
560	else if (!strcmp(str, "conf1")) {
561		pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
562		return NULL;
563	}
564	else if (!strcmp(str, "conf2")) {
565		pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
566		return NULL;
567	}
568#endif
569#ifdef CONFIG_PCI_MMCONFIG
570	else if (!strcmp(str, "nommconf")) {
571		pci_probe &= ~PCI_PROBE_MMCONF;
572		return NULL;
573	}
574	else if (!strcmp(str, "check_enable_amd_mmconf")) {
575		pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
576		return NULL;
577	}
578#endif
579	else if (!strcmp(str, "noacpi")) {
580		acpi_noirq_set();
581		return NULL;
582	}
583	else if (!strcmp(str, "noearly")) {
584		pci_probe |= PCI_PROBE_NOEARLY;
585		return NULL;
586	}
587	else if (!strcmp(str, "usepirqmask")) {
588		pci_probe |= PCI_USE_PIRQ_MASK;
589		return NULL;
590	} else if (!strncmp(str, "irqmask=", 8)) {
591		pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
592		return NULL;
593	} else if (!strncmp(str, "lastbus=", 8)) {
594		pcibios_last_bus = simple_strtol(str+8, NULL, 0);
595		return NULL;
596	} else if (!strcmp(str, "rom")) {
597		pci_probe |= PCI_ASSIGN_ROMS;
598		return NULL;
599	} else if (!strcmp(str, "norom")) {
600		pci_probe |= PCI_NOASSIGN_ROMS;
601		return NULL;
602	} else if (!strcmp(str, "nobar")) {
603		pci_probe |= PCI_NOASSIGN_BARS;
604		return NULL;
605	} else if (!strcmp(str, "assign-busses")) {
606		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
607		return NULL;
608	} else if (!strcmp(str, "use_crs")) {
609		pci_probe |= PCI_USE__CRS;
610		return NULL;
611	} else if (!strcmp(str, "nocrs")) {
612		pci_probe |= PCI_ROOT_NO_CRS;
613		return NULL;
614	} else if (!strcmp(str, "earlydump")) {
615		pci_early_dump_regs = 1;
616		return NULL;
617	} else if (!strcmp(str, "routeirq")) {
618		pci_routeirq = 1;
619		return NULL;
620	} else if (!strcmp(str, "skip_isa_align")) {
621		pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
622		return NULL;
623	} else if (!strcmp(str, "noioapicquirk")) {
624		noioapicquirk = 1;
625		return NULL;
626	} else if (!strcmp(str, "ioapicreroute")) {
627		if (noioapicreroute != -1)
628			noioapicreroute = 0;
629		return NULL;
630	} else if (!strcmp(str, "noioapicreroute")) {
631		if (noioapicreroute != -1)
632			noioapicreroute = 1;
633		return NULL;
634	}
635	return str;
636}
637
638unsigned int pcibios_assign_all_busses(void)
639{
640	return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
641}
642
643#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
644static LIST_HEAD(dma_domain_list);
645static DEFINE_SPINLOCK(dma_domain_list_lock);
646
647void add_dma_domain(struct dma_domain *domain)
648{
649	spin_lock(&dma_domain_list_lock);
650	list_add(&domain->node, &dma_domain_list);
651	spin_unlock(&dma_domain_list_lock);
652}
653EXPORT_SYMBOL_GPL(add_dma_domain);
654
655void del_dma_domain(struct dma_domain *domain)
656{
657	spin_lock(&dma_domain_list_lock);
658	list_del(&domain->node);
659	spin_unlock(&dma_domain_list_lock);
660}
661EXPORT_SYMBOL_GPL(del_dma_domain);
662
663static void set_dma_domain_ops(struct pci_dev *pdev)
664{
665	struct dma_domain *domain;
666
667	spin_lock(&dma_domain_list_lock);
668	list_for_each_entry(domain, &dma_domain_list, node) {
669		if (pci_domain_nr(pdev->bus) == domain->domain_nr) {
670			pdev->dev.archdata.dma_ops = domain->dma_ops;
671			break;
672		}
673	}
674	spin_unlock(&dma_domain_list_lock);
675}
676#else
677static void set_dma_domain_ops(struct pci_dev *pdev) {}
678#endif
679
 
 
 
 
 
 
680int pcibios_add_device(struct pci_dev *dev)
681{
682	struct setup_data *data;
683	struct pci_setup_rom *rom;
684	u64 pa_data;
685
686	pa_data = boot_params.hdr.setup_data;
687	while (pa_data) {
688		data = ioremap(pa_data, sizeof(*rom));
689		if (!data)
690			return -ENOMEM;
691
692		if (data->type == SETUP_PCI) {
693			rom = (struct pci_setup_rom *)data;
694
695			if ((pci_domain_nr(dev->bus) == rom->segment) &&
696			    (dev->bus->number == rom->bus) &&
697			    (PCI_SLOT(dev->devfn) == rom->device) &&
698			    (PCI_FUNC(dev->devfn) == rom->function) &&
699			    (dev->vendor == rom->vendor) &&
700			    (dev->device == rom->devid)) {
701				dev->rom = pa_data +
702				      offsetof(struct pci_setup_rom, romdata);
703				dev->romlen = rom->pcilen;
704			}
705		}
706		pa_data = data->next;
707		iounmap(data);
708	}
709	set_dma_domain_ops(dev);
 
710	return 0;
711}
712
713int pcibios_enable_device(struct pci_dev *dev, int mask)
714{
715	int err;
716
717	if ((err = pci_enable_resources(dev, mask)) < 0)
718		return err;
719
720	if (!pci_dev_msi_enabled(dev))
721		return pcibios_enable_irq(dev);
722	return 0;
723}
724
725void pcibios_disable_device (struct pci_dev *dev)
726{
727	if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
728		pcibios_disable_irq(dev);
729}
730
731int pci_ext_cfg_avail(void)
732{
733	if (raw_pci_ext_ops)
734		return 1;
735	else
736		return 0;
737}
v4.10.11
  1/*
  2 *	Low-Level PCI Support for PC
  3 *
  4 *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
  5 */
  6
  7#include <linux/sched.h>
  8#include <linux/pci.h>
  9#include <linux/pci-acpi.h>
 10#include <linux/ioport.h>
 11#include <linux/init.h>
 12#include <linux/dmi.h>
 13#include <linux/slab.h>
 14
 15#include <asm/acpi.h>
 16#include <asm/segment.h>
 17#include <asm/io.h>
 18#include <asm/smp.h>
 19#include <asm/pci_x86.h>
 20#include <asm/setup.h>
 21
 22unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 23				PCI_PROBE_MMCONF;
 24
 25unsigned int pci_early_dump_regs;
 26static int pci_bf_sort;
 27static int smbios_type_b1_flag;
 28int pci_routeirq;
 29int noioapicquirk;
 30#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 31int noioapicreroute = 0;
 32#else
 33int noioapicreroute = 1;
 34#endif
 35int pcibios_last_bus = -1;
 36unsigned long pirq_table_addr;
 37const struct pci_raw_ops *__read_mostly raw_pci_ops;
 38const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
 39
 40int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 41						int reg, int len, u32 *val)
 42{
 43	if (domain == 0 && reg < 256 && raw_pci_ops)
 44		return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
 45	if (raw_pci_ext_ops)
 46		return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
 47	return -EINVAL;
 48}
 49
 50int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
 51						int reg, int len, u32 val)
 52{
 53	if (domain == 0 && reg < 256 && raw_pci_ops)
 54		return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
 55	if (raw_pci_ext_ops)
 56		return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
 57	return -EINVAL;
 58}
 59
 60static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
 61{
 62	return raw_pci_read(pci_domain_nr(bus), bus->number,
 63				 devfn, where, size, value);
 64}
 65
 66static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
 67{
 68	return raw_pci_write(pci_domain_nr(bus), bus->number,
 69				  devfn, where, size, value);
 70}
 71
 72struct pci_ops pci_root_ops = {
 73	.read = pci_read,
 74	.write = pci_write,
 75};
 76
 77/*
 78 * This interrupt-safe spinlock protects all accesses to PCI
 79 * configuration space.
 80 */
 81DEFINE_RAW_SPINLOCK(pci_config_lock);
 82
 83static int __init can_skip_ioresource_align(const struct dmi_system_id *d)
 84{
 85	pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
 86	printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
 87	return 0;
 88}
 89
 90static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = {
 91/*
 92 * Systems where PCI IO resource ISA alignment can be skipped
 93 * when the ISA enable bit in the bridge control is not set
 94 */
 95	{
 96		.callback = can_skip_ioresource_align,
 97		.ident = "IBM System x3800",
 98		.matches = {
 99			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
100			DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
101		},
102	},
103	{
104		.callback = can_skip_ioresource_align,
105		.ident = "IBM System x3850",
106		.matches = {
107			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
108			DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
109		},
110	},
111	{
112		.callback = can_skip_ioresource_align,
113		.ident = "IBM System x3950",
114		.matches = {
115			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
116			DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
117		},
118	},
119	{}
120};
121
122void __init dmi_check_skip_isa_align(void)
123{
124	dmi_check_system(can_skip_pciprobe_dmi_table);
125}
126
127static void pcibios_fixup_device_resources(struct pci_dev *dev)
128{
129	struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
130	struct resource *bar_r;
131	int bar;
132
133	if (pci_probe & PCI_NOASSIGN_BARS) {
134		/*
135		* If the BIOS did not assign the BAR, zero out the
136		* resource so the kernel doesn't attempt to assign
137		* it later on in pci_assign_unassigned_resources
138		*/
139		for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
140			bar_r = &dev->resource[bar];
141			if (bar_r->start == 0 && bar_r->end != 0) {
142				bar_r->flags = 0;
143				bar_r->end = 0;
144			}
145		}
146	}
147
148	if (pci_probe & PCI_NOASSIGN_ROMS) {
149		if (rom_r->parent)
150			return;
151		if (rom_r->start) {
152			/* we deal with BIOS assigned ROM later */
153			return;
154		}
155		rom_r->start = rom_r->end = rom_r->flags = 0;
156	}
157}
158
159/*
160 *  Called after each bus is probed, but before its children
161 *  are examined.
162 */
163
164void pcibios_fixup_bus(struct pci_bus *b)
165{
166	struct pci_dev *dev;
167
168	pci_read_bridge_bases(b);
169	list_for_each_entry(dev, &b->devices, bus_list)
170		pcibios_fixup_device_resources(dev);
171}
172
173void pcibios_add_bus(struct pci_bus *bus)
174{
175	acpi_pci_add_bus(bus);
176}
177
178void pcibios_remove_bus(struct pci_bus *bus)
179{
180	acpi_pci_remove_bus(bus);
181}
182
183/*
184 * Only use DMI information to set this if nothing was passed
185 * on the kernel command line (which was parsed earlier).
186 */
187
188static int __init set_bf_sort(const struct dmi_system_id *d)
189{
190	if (pci_bf_sort == pci_bf_sort_default) {
191		pci_bf_sort = pci_dmi_bf;
192		printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
193	}
194	return 0;
195}
196
197static void __init read_dmi_type_b1(const struct dmi_header *dm,
198				    void *private_data)
199{
200	u8 *d = (u8 *)dm + 4;
201
202	if (dm->type != 0xB1)
203		return;
204	switch (((*(u32 *)d) >> 9) & 0x03) {
205	case 0x00:
206		printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n");
207		break;
208	case 0x01: /* set pci=bfsort */
209		smbios_type_b1_flag = 1;
210		break;
211	case 0x02: /* do not set pci=bfsort */
212		smbios_type_b1_flag = 2;
213		break;
214	default:
215		break;
216	}
217}
218
219static int __init find_sort_method(const struct dmi_system_id *d)
220{
221	dmi_walk(read_dmi_type_b1, NULL);
222
223	if (smbios_type_b1_flag == 1) {
224		set_bf_sort(d);
225		return 0;
226	}
227	return -1;
228}
229
230/*
231 * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
232 */
233#ifdef __i386__
234static int __init assign_all_busses(const struct dmi_system_id *d)
235{
236	pci_probe |= PCI_ASSIGN_ALL_BUSSES;
237	printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
238			" (pci=assign-busses)\n", d->ident);
239	return 0;
240}
241#endif
242
243static int __init set_scan_all(const struct dmi_system_id *d)
244{
245	printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
246	       d->ident);
247	pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
248	return 0;
249}
250
251static const struct dmi_system_id pciprobe_dmi_table[] __initconst = {
252#ifdef __i386__
253/*
254 * Laptops which need pci=assign-busses to see Cardbus cards
255 */
256	{
257		.callback = assign_all_busses,
258		.ident = "Samsung X20 Laptop",
259		.matches = {
260			DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
261			DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
262		},
263	},
264#endif		/* __i386__ */
265	{
266		.callback = set_bf_sort,
267		.ident = "Dell PowerEdge 1950",
268		.matches = {
269			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
270			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
271		},
272	},
273	{
274		.callback = set_bf_sort,
275		.ident = "Dell PowerEdge 1955",
276		.matches = {
277			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
278			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
279		},
280	},
281	{
282		.callback = set_bf_sort,
283		.ident = "Dell PowerEdge 2900",
284		.matches = {
285			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
286			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
287		},
288	},
289	{
290		.callback = set_bf_sort,
291		.ident = "Dell PowerEdge 2950",
292		.matches = {
293			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
294			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
295		},
296	},
297	{
298		.callback = set_bf_sort,
299		.ident = "Dell PowerEdge R900",
300		.matches = {
301			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
302			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
303		},
304	},
305	{
306		.callback = find_sort_method,
307		.ident = "Dell System",
308		.matches = {
309			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
310		},
311	},
312	{
313		.callback = set_bf_sort,
314		.ident = "HP ProLiant BL20p G3",
315		.matches = {
316			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
317			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
318		},
319	},
320	{
321		.callback = set_bf_sort,
322		.ident = "HP ProLiant BL20p G4",
323		.matches = {
324			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
325			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
326		},
327	},
328	{
329		.callback = set_bf_sort,
330		.ident = "HP ProLiant BL30p G1",
331		.matches = {
332			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
333			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
334		},
335	},
336	{
337		.callback = set_bf_sort,
338		.ident = "HP ProLiant BL25p G1",
339		.matches = {
340			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
341			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
342		},
343	},
344	{
345		.callback = set_bf_sort,
346		.ident = "HP ProLiant BL35p G1",
347		.matches = {
348			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
349			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
350		},
351	},
352	{
353		.callback = set_bf_sort,
354		.ident = "HP ProLiant BL45p G1",
355		.matches = {
356			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
357			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
358		},
359	},
360	{
361		.callback = set_bf_sort,
362		.ident = "HP ProLiant BL45p G2",
363		.matches = {
364			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
365			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
366		},
367	},
368	{
369		.callback = set_bf_sort,
370		.ident = "HP ProLiant BL460c G1",
371		.matches = {
372			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
373			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
374		},
375	},
376	{
377		.callback = set_bf_sort,
378		.ident = "HP ProLiant BL465c G1",
379		.matches = {
380			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
381			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
382		},
383	},
384	{
385		.callback = set_bf_sort,
386		.ident = "HP ProLiant BL480c G1",
387		.matches = {
388			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
389			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
390		},
391	},
392	{
393		.callback = set_bf_sort,
394		.ident = "HP ProLiant BL685c G1",
395		.matches = {
396			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
397			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
398		},
399	},
400	{
401		.callback = set_bf_sort,
402		.ident = "HP ProLiant DL360",
403		.matches = {
404			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
405			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
406		},
407	},
408	{
409		.callback = set_bf_sort,
410		.ident = "HP ProLiant DL380",
411		.matches = {
412			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
413			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
414		},
415	},
416#ifdef __i386__
417	{
418		.callback = assign_all_busses,
419		.ident = "Compaq EVO N800c",
420		.matches = {
421			DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
422			DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
423		},
424	},
425#endif
426	{
427		.callback = set_bf_sort,
428		.ident = "HP ProLiant DL385 G2",
429		.matches = {
430			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
431			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
432		},
433	},
434	{
435		.callback = set_bf_sort,
436		.ident = "HP ProLiant DL585 G2",
437		.matches = {
438			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
439			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
440		},
441	},
442	{
443		.callback = set_scan_all,
444		.ident = "Stratus/NEC ftServer",
445		.matches = {
446			DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
447			DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
448		},
449	},
450        {
451                .callback = set_scan_all,
452                .ident = "Stratus/NEC ftServer",
453                .matches = {
454                        DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
455                        DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"),
456                },
457        },
458        {
459                .callback = set_scan_all,
460                .ident = "Stratus/NEC ftServer",
461                .matches = {
462                        DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
463                        DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"),
464                },
465        },
466	{}
467};
468
469void __init dmi_check_pciprobe(void)
470{
471	dmi_check_system(pciprobe_dmi_table);
472}
473
474void pcibios_scan_root(int busnum)
475{
476	struct pci_bus *bus;
477	struct pci_sysdata *sd;
478	LIST_HEAD(resources);
479
480	sd = kzalloc(sizeof(*sd), GFP_KERNEL);
481	if (!sd) {
482		printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
483		return;
484	}
485	sd->node = x86_pci_root_bus_node(busnum);
486	x86_pci_root_bus_resources(busnum, &resources);
487	printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
488	bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
489	if (!bus) {
490		pci_free_resource_list(&resources);
491		kfree(sd);
492		return;
493	}
494	pci_bus_add_devices(bus);
495}
496
497void __init pcibios_set_cache_line_size(void)
498{
499	struct cpuinfo_x86 *c = &boot_cpu_data;
500
501	/*
502	 * Set PCI cacheline size to that of the CPU if the CPU has reported it.
503	 * (For older CPUs that don't support cpuid, we se it to 32 bytes
504	 * It's also good for 386/486s (which actually have 16)
505	 * as quite a few PCI devices do not support smaller values.
506	 */
507	if (c->x86_clflush_size > 0) {
508		pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
509		printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
510			pci_dfl_cache_line_size << 2);
511	} else {
512 		pci_dfl_cache_line_size = 32 >> 2;
513		printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
514	}
515}
516
517int __init pcibios_init(void)
518{
519	if (!raw_pci_ops && !raw_pci_ext_ops) {
520		printk(KERN_WARNING "PCI: System does not support PCI\n");
521		return 0;
522	}
523
524	pcibios_set_cache_line_size();
525	pcibios_resource_survey();
526
527	if (pci_bf_sort >= pci_force_bf)
528		pci_sort_breadthfirst();
529	return 0;
530}
531
532char *__init pcibios_setup(char *str)
533{
534	if (!strcmp(str, "off")) {
535		pci_probe = 0;
536		return NULL;
537	} else if (!strcmp(str, "bfsort")) {
538		pci_bf_sort = pci_force_bf;
539		return NULL;
540	} else if (!strcmp(str, "nobfsort")) {
541		pci_bf_sort = pci_force_nobf;
542		return NULL;
543	}
544#ifdef CONFIG_PCI_BIOS
545	else if (!strcmp(str, "bios")) {
546		pci_probe = PCI_PROBE_BIOS;
547		return NULL;
548	} else if (!strcmp(str, "nobios")) {
549		pci_probe &= ~PCI_PROBE_BIOS;
550		return NULL;
551	} else if (!strcmp(str, "biosirq")) {
552		pci_probe |= PCI_BIOS_IRQ_SCAN;
553		return NULL;
554	} else if (!strncmp(str, "pirqaddr=", 9)) {
555		pirq_table_addr = simple_strtoul(str+9, NULL, 0);
556		return NULL;
557	}
558#endif
559#ifdef CONFIG_PCI_DIRECT
560	else if (!strcmp(str, "conf1")) {
561		pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
562		return NULL;
563	}
564	else if (!strcmp(str, "conf2")) {
565		pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
566		return NULL;
567	}
568#endif
569#ifdef CONFIG_PCI_MMCONFIG
570	else if (!strcmp(str, "nommconf")) {
571		pci_probe &= ~PCI_PROBE_MMCONF;
572		return NULL;
573	}
574	else if (!strcmp(str, "check_enable_amd_mmconf")) {
575		pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
576		return NULL;
577	}
578#endif
579	else if (!strcmp(str, "noacpi")) {
580		acpi_noirq_set();
581		return NULL;
582	}
583	else if (!strcmp(str, "noearly")) {
584		pci_probe |= PCI_PROBE_NOEARLY;
585		return NULL;
586	}
587	else if (!strcmp(str, "usepirqmask")) {
588		pci_probe |= PCI_USE_PIRQ_MASK;
589		return NULL;
590	} else if (!strncmp(str, "irqmask=", 8)) {
591		pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
592		return NULL;
593	} else if (!strncmp(str, "lastbus=", 8)) {
594		pcibios_last_bus = simple_strtol(str+8, NULL, 0);
595		return NULL;
596	} else if (!strcmp(str, "rom")) {
597		pci_probe |= PCI_ASSIGN_ROMS;
598		return NULL;
599	} else if (!strcmp(str, "norom")) {
600		pci_probe |= PCI_NOASSIGN_ROMS;
601		return NULL;
602	} else if (!strcmp(str, "nobar")) {
603		pci_probe |= PCI_NOASSIGN_BARS;
604		return NULL;
605	} else if (!strcmp(str, "assign-busses")) {
606		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
607		return NULL;
608	} else if (!strcmp(str, "use_crs")) {
609		pci_probe |= PCI_USE__CRS;
610		return NULL;
611	} else if (!strcmp(str, "nocrs")) {
612		pci_probe |= PCI_ROOT_NO_CRS;
613		return NULL;
614	} else if (!strcmp(str, "earlydump")) {
615		pci_early_dump_regs = 1;
616		return NULL;
617	} else if (!strcmp(str, "routeirq")) {
618		pci_routeirq = 1;
619		return NULL;
620	} else if (!strcmp(str, "skip_isa_align")) {
621		pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
622		return NULL;
623	} else if (!strcmp(str, "noioapicquirk")) {
624		noioapicquirk = 1;
625		return NULL;
626	} else if (!strcmp(str, "ioapicreroute")) {
627		if (noioapicreroute != -1)
628			noioapicreroute = 0;
629		return NULL;
630	} else if (!strcmp(str, "noioapicreroute")) {
631		if (noioapicreroute != -1)
632			noioapicreroute = 1;
633		return NULL;
634	}
635	return str;
636}
637
638unsigned int pcibios_assign_all_busses(void)
639{
640	return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
641}
642
643#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
644static LIST_HEAD(dma_domain_list);
645static DEFINE_SPINLOCK(dma_domain_list_lock);
646
647void add_dma_domain(struct dma_domain *domain)
648{
649	spin_lock(&dma_domain_list_lock);
650	list_add(&domain->node, &dma_domain_list);
651	spin_unlock(&dma_domain_list_lock);
652}
653EXPORT_SYMBOL_GPL(add_dma_domain);
654
655void del_dma_domain(struct dma_domain *domain)
656{
657	spin_lock(&dma_domain_list_lock);
658	list_del(&domain->node);
659	spin_unlock(&dma_domain_list_lock);
660}
661EXPORT_SYMBOL_GPL(del_dma_domain);
662
663static void set_dma_domain_ops(struct pci_dev *pdev)
664{
665	struct dma_domain *domain;
666
667	spin_lock(&dma_domain_list_lock);
668	list_for_each_entry(domain, &dma_domain_list, node) {
669		if (pci_domain_nr(pdev->bus) == domain->domain_nr) {
670			pdev->dev.archdata.dma_ops = domain->dma_ops;
671			break;
672		}
673	}
674	spin_unlock(&dma_domain_list_lock);
675}
676#else
677static void set_dma_domain_ops(struct pci_dev *pdev) {}
678#endif
679
680static void set_dev_domain_options(struct pci_dev *pdev)
681{
682	if (is_vmd(pdev->bus))
683		pdev->hotplug_user_indicators = 1;
684}
685
686int pcibios_add_device(struct pci_dev *dev)
687{
688	struct setup_data *data;
689	struct pci_setup_rom *rom;
690	u64 pa_data;
691
692	pa_data = boot_params.hdr.setup_data;
693	while (pa_data) {
694		data = ioremap(pa_data, sizeof(*rom));
695		if (!data)
696			return -ENOMEM;
697
698		if (data->type == SETUP_PCI) {
699			rom = (struct pci_setup_rom *)data;
700
701			if ((pci_domain_nr(dev->bus) == rom->segment) &&
702			    (dev->bus->number == rom->bus) &&
703			    (PCI_SLOT(dev->devfn) == rom->device) &&
704			    (PCI_FUNC(dev->devfn) == rom->function) &&
705			    (dev->vendor == rom->vendor) &&
706			    (dev->device == rom->devid)) {
707				dev->rom = pa_data +
708				      offsetof(struct pci_setup_rom, romdata);
709				dev->romlen = rom->pcilen;
710			}
711		}
712		pa_data = data->next;
713		iounmap(data);
714	}
715	set_dma_domain_ops(dev);
716	set_dev_domain_options(dev);
717	return 0;
718}
719
720int pcibios_enable_device(struct pci_dev *dev, int mask)
721{
722	int err;
723
724	if ((err = pci_enable_resources(dev, mask)) < 0)
725		return err;
726
727	if (!pci_dev_msi_enabled(dev))
728		return pcibios_enable_irq(dev);
729	return 0;
730}
731
732void pcibios_disable_device (struct pci_dev *dev)
733{
734	if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
735		pcibios_disable_irq(dev);
736}
737
738int pci_ext_cfg_avail(void)
739{
740	if (raw_pci_ext_ops)
741		return 1;
742	else
743		return 0;
744}