Loading...
1#
2# USB Storage driver configuration
3#
4
5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6comment "also be needed; see USB_STORAGE Help for more info"
7
8config USB_STORAGE
9 tristate "USB Mass Storage support"
10 depends on SCSI
11 ---help---
12 Say Y here if you want to connect USB mass storage devices to your
13 computer's USB port. This is the driver you need for USB
14 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
15 USB flash devices, and memory sticks, along with
16 similar devices. This driver may also be used for some cameras
17 and card readers.
18
19 This option depends on 'SCSI' support being enabled, but you
20 probably also need 'SCSI device support: SCSI disk support'
21 (BLK_DEV_SD) for most USB storage devices.
22
23 To compile this driver as a module, choose M here: the
24 module will be called usb-storage.
25
26config USB_STORAGE_DEBUG
27 bool "USB Mass Storage verbose debug"
28 depends on USB_STORAGE
29 help
30 Say Y here in order to have the USB Mass Storage code generate
31 verbose debugging messages.
32
33config USB_STORAGE_REALTEK
34 tristate "Realtek Card Reader support"
35 depends on USB_STORAGE
36 help
37 Say Y here to include additional code to support the power-saving function
38 for Realtek RTS51xx USB card readers.
39
40 If this driver is compiled as a module, it will be named ums-realtek.
41
42config REALTEK_AUTOPM
43 bool "Realtek Card Reader autosuspend support"
44 depends on USB_STORAGE_REALTEK && PM
45 default y
46
47config USB_STORAGE_DATAFAB
48 tristate "Datafab Compact Flash Reader support"
49 depends on USB_STORAGE
50 help
51 Support for certain Datafab CompactFlash readers.
52 Datafab has a web page at <http://www.datafab.com/>.
53
54 If this driver is compiled as a module, it will be named ums-datafab.
55
56config USB_STORAGE_FREECOM
57 tristate "Freecom USB/ATAPI Bridge support"
58 depends on USB_STORAGE
59 help
60 Support for the Freecom USB to IDE/ATAPI adaptor.
61 Freecom has a web page at <http://www.freecom.de/>.
62
63 If this driver is compiled as a module, it will be named ums-freecom.
64
65config USB_STORAGE_ISD200
66 tristate "ISD-200 USB/ATA Bridge support"
67 depends on USB_STORAGE
68 ---help---
69 Say Y here if you want to use USB Mass Store devices based
70 on the In-Systems Design ISD-200 USB/ATA bridge.
71
72 Some of the products that use this chip are:
73
74 - Archos Jukebox 6000
75 - ISD SmartCable for Storage
76 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
77 - Sony CRX10U CD-R/RW drive
78 - CyQ've CQ8060A CDRW drive
79 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
80
81 If this driver is compiled as a module, it will be named ums-isd200.
82
83config USB_STORAGE_USBAT
84 tristate "USBAT/USBAT02-based storage support"
85 depends on USB_STORAGE
86 help
87 Say Y here to include additional code to support storage devices
88 based on the SCM/Shuttle USBAT/USBAT02 processors.
89
90 Devices reported to work with this driver include:
91 - CompactFlash reader included with Kodak DC3800 camera
92 - Dane-Elec Zmate CompactFlash reader
93 - Delkin Efilm reader2
94 - HP 8200e/8210e/8230e CD-Writer Plus drives
95 - I-JAM JS-50U
96 - Jessops CompactFlash JESDCFRU BLACK
97 - Kingston Technology PCREAD-USB/CF
98 - Maxell UA4 CompactFlash reader
99 - Memorex UCF-100
100 - Microtech ZiO! ICS-45 CF2
101 - RCA LYRA MP3 portable
102 - Sandisk ImageMate SDDR-05b
103
104 If this driver is compiled as a module, it will be named ums-usbat.
105
106config USB_STORAGE_SDDR09
107 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
108 depends on USB_STORAGE
109 help
110 Say Y here to include additional code to support the Sandisk SDDR-09
111 SmartMedia reader in the USB Mass Storage driver.
112 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
113
114 If this driver is compiled as a module, it will be named ums-sddr09.
115
116config USB_STORAGE_SDDR55
117 tristate "SanDisk SDDR-55 SmartMedia support"
118 depends on USB_STORAGE
119 help
120 Say Y here to include additional code to support the Sandisk SDDR-55
121 SmartMedia reader in the USB Mass Storage driver.
122
123 If this driver is compiled as a module, it will be named ums-sddr55.
124
125config USB_STORAGE_JUMPSHOT
126 tristate "Lexar Jumpshot Compact Flash Reader"
127 depends on USB_STORAGE
128 help
129 Say Y here to include additional code to support the Lexar Jumpshot
130 USB CompactFlash reader.
131
132 If this driver is compiled as a module, it will be named ums-jumpshot.
133
134config USB_STORAGE_ALAUDA
135 tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
136 depends on USB_STORAGE
137 help
138 Say Y here to include additional code to support the Olympus MAUSB-10
139 and Fujifilm DPC-R1 USB Card reader/writer devices.
140
141 These devices are based on the Alauda chip and support both
142 XD and SmartMedia cards.
143
144 If this driver is compiled as a module, it will be named ums-alauda.
145
146config USB_STORAGE_ONETOUCH
147 tristate "Support OneTouch Button on Maxtor Hard Drives"
148 depends on USB_STORAGE
149 depends on INPUT=y || INPUT=USB_STORAGE
150 help
151 Say Y here to include additional code to support the Maxtor OneTouch
152 USB hard drive's onetouch button.
153
154 This code registers the button on the front of Maxtor OneTouch USB
155 hard drive's as an input device. An action can be associated with
156 this input in any keybinding software. (e.g. gnome's keyboard short-
157 cuts)
158
159 If this driver is compiled as a module, it will be named ums-onetouch.
160
161config USB_STORAGE_KARMA
162 tristate "Support for Rio Karma music player"
163 depends on USB_STORAGE
164 help
165 Say Y here to include additional code to support the Rio Karma
166 USB interface.
167
168 This code places the Rio Karma into mass storage mode, enabling
169 it to be mounted as an ordinary filesystem. Performing an eject
170 on the resulting scsi device node returns the Karma to normal
171 operation.
172
173 If this driver is compiled as a module, it will be named ums-karma.
174
175config USB_STORAGE_CYPRESS_ATACB
176 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
177 depends on USB_STORAGE
178 ---help---
179 Say Y here if you want to use SAT (ata pass through) on devices based
180 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
181 to use tools to tune and monitor your drive (like hdparm or smartctl).
182
183 If you say no here your device will still work with the standard usb
184 mass storage class.
185
186 If this driver is compiled as a module, it will be named ums-cypress.
187
188config USB_STORAGE_ENE_UB6250
189 tristate "USB ENE card reader support"
190 depends on SCSI
191 depends on USB_STORAGE
192 ---help---
193 Say Y here if you wish to control a ENE SD/MS Card reader.
194 Note that this driver does not support SM cards.
195
196 This option depends on 'SCSI' support being enabled, but you
197 probably also need 'SCSI device support: SCSI disk support'
198 (BLK_DEV_SD) for most USB storage devices.
199
200 To compile this driver as a module, choose M here: the
201 module will be called ums-eneub6250.
202
203config USB_UAS
204 tristate "USB Attached SCSI"
205 depends on SCSI && USB_STORAGE
206 help
207 The USB Attached SCSI protocol is supported by some USB
208 storage devices. It permits higher performance by supporting
209 multiple outstanding commands.
210
211 If you don't know whether you have a UAS device, it is safe to
212 say 'Y' or 'M' here and the kernel will use the right driver.
213
214 If you compile this driver as a module, it will be named uas.
1#
2# USB Storage driver configuration
3#
4
5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6comment "also be needed; see USB_STORAGE Help for more info"
7 depends on USB
8
9config USB_STORAGE
10 tristate "USB Mass Storage support"
11 depends on USB && SCSI
12 ---help---
13 Say Y here if you want to connect USB mass storage devices to your
14 computer's USB port. This is the driver you need for USB
15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
16 USB flash devices, and memory sticks, along with
17 similar devices. This driver may also be used for some cameras
18 and card readers.
19
20 This option depends on 'SCSI' support being enabled, but you
21 probably also need 'SCSI device support: SCSI disk support'
22 (BLK_DEV_SD) for most USB storage devices.
23
24 To compile this driver as a module, choose M here: the
25 module will be called usb-storage.
26
27config USB_STORAGE_DEBUG
28 bool "USB Mass Storage verbose debug"
29 depends on USB_STORAGE
30 help
31 Say Y here in order to have the USB Mass Storage code generate
32 verbose debugging messages.
33
34config USB_STORAGE_REALTEK
35 tristate "Realtek Card Reader support"
36 depends on USB_STORAGE
37 help
38 Say Y here to include additional code to support the power-saving function
39 for Realtek RTS51xx USB card readers.
40
41 If this driver is compiled as a module, it will be named ums-realtek.
42
43config REALTEK_AUTOPM
44 bool "Realtek Card Reader autosuspend support"
45 depends on USB_STORAGE_REALTEK && PM_RUNTIME
46 default y
47
48config USB_STORAGE_DATAFAB
49 tristate "Datafab Compact Flash Reader support"
50 depends on USB_STORAGE
51 help
52 Support for certain Datafab CompactFlash readers.
53 Datafab has a web page at <http://www.datafab.com/>.
54
55 If this driver is compiled as a module, it will be named ums-datafab.
56
57config USB_STORAGE_FREECOM
58 tristate "Freecom USB/ATAPI Bridge support"
59 depends on USB_STORAGE
60 help
61 Support for the Freecom USB to IDE/ATAPI adaptor.
62 Freecom has a web page at <http://www.freecom.de/>.
63
64 If this driver is compiled as a module, it will be named ums-freecom.
65
66config USB_STORAGE_ISD200
67 tristate "ISD-200 USB/ATA Bridge support"
68 depends on USB_STORAGE
69 ---help---
70 Say Y here if you want to use USB Mass Store devices based
71 on the In-Systems Design ISD-200 USB/ATA bridge.
72
73 Some of the products that use this chip are:
74
75 - Archos Jukebox 6000
76 - ISD SmartCable for Storage
77 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
78 - Sony CRX10U CD-R/RW drive
79 - CyQ've CQ8060A CDRW drive
80 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
81
82 If this driver is compiled as a module, it will be named ums-isd200.
83
84config USB_STORAGE_USBAT
85 tristate "USBAT/USBAT02-based storage support"
86 depends on USB_STORAGE
87 help
88 Say Y here to include additional code to support storage devices
89 based on the SCM/Shuttle USBAT/USBAT02 processors.
90
91 Devices reported to work with this driver include:
92 - CompactFlash reader included with Kodak DC3800 camera
93 - Dane-Elec Zmate CompactFlash reader
94 - Delkin Efilm reader2
95 - HP 8200e/8210e/8230e CD-Writer Plus drives
96 - I-JAM JS-50U
97 - Jessops CompactFlash JESDCFRU BLACK
98 - Kingston Technology PCREAD-USB/CF
99 - Maxell UA4 CompactFlash reader
100 - Memorex UCF-100
101 - Microtech ZiO! ICS-45 CF2
102 - RCA LYRA MP3 portable
103 - Sandisk ImageMate SDDR-05b
104
105 If this driver is compiled as a module, it will be named ums-usbat.
106
107config USB_STORAGE_SDDR09
108 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
109 depends on USB_STORAGE
110 help
111 Say Y here to include additional code to support the Sandisk SDDR-09
112 SmartMedia reader in the USB Mass Storage driver.
113 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
114
115 If this driver is compiled as a module, it will be named ums-sddr09.
116
117config USB_STORAGE_SDDR55
118 tristate "SanDisk SDDR-55 SmartMedia support"
119 depends on USB_STORAGE
120 help
121 Say Y here to include additional code to support the Sandisk SDDR-55
122 SmartMedia reader in the USB Mass Storage driver.
123
124 If this driver is compiled as a module, it will be named ums-sddr55.
125
126config USB_STORAGE_JUMPSHOT
127 tristate "Lexar Jumpshot Compact Flash Reader"
128 depends on USB_STORAGE
129 help
130 Say Y here to include additional code to support the Lexar Jumpshot
131 USB CompactFlash reader.
132
133 If this driver is compiled as a module, it will be named ums-jumpshot.
134
135config USB_STORAGE_ALAUDA
136 tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
137 depends on USB_STORAGE
138 help
139 Say Y here to include additional code to support the Olympus MAUSB-10
140 and Fujifilm DPC-R1 USB Card reader/writer devices.
141
142 These devices are based on the Alauda chip and support both
143 XD and SmartMedia cards.
144
145 If this driver is compiled as a module, it will be named ums-alauda.
146
147config USB_STORAGE_ONETOUCH
148 tristate "Support OneTouch Button on Maxtor Hard Drives"
149 depends on USB_STORAGE
150 depends on INPUT=y || INPUT=USB_STORAGE
151 help
152 Say Y here to include additional code to support the Maxtor OneTouch
153 USB hard drive's onetouch button.
154
155 This code registers the button on the front of Maxtor OneTouch USB
156 hard drive's as an input device. An action can be associated with
157 this input in any keybinding software. (e.g. gnome's keyboard short-
158 cuts)
159
160 If this driver is compiled as a module, it will be named ums-onetouch.
161
162config USB_STORAGE_KARMA
163 tristate "Support for Rio Karma music player"
164 depends on USB_STORAGE
165 help
166 Say Y here to include additional code to support the Rio Karma
167 USB interface.
168
169 This code places the Rio Karma into mass storage mode, enabling
170 it to be mounted as an ordinary filesystem. Performing an eject
171 on the resulting scsi device node returns the Karma to normal
172 operation.
173
174 If this driver is compiled as a module, it will be named ums-karma.
175
176config USB_STORAGE_CYPRESS_ATACB
177 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
178 depends on USB_STORAGE
179 ---help---
180 Say Y here if you want to use SAT (ata pass through) on devices based
181 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
182 to use tools to tune and monitor your drive (like hdparm or smartctl).
183
184 If you say no here your device will still work with the standard usb
185 mass storage class.
186
187 If this driver is compiled as a module, it will be named ums-cypress.
188
189config USB_STORAGE_ENE_UB6250
190 tristate "USB ENE card reader support"
191 depends on USB && SCSI
192 depends on USB_STORAGE
193 ---help---
194 Say Y here if you wish to control a ENE SD/MS Card reader.
195 To use SM card, please build driver/staging/keucr/keucr.ko
196
197 This option depends on 'SCSI' support being enabled, but you
198 probably also need 'SCSI device support: SCSI disk support'
199 (BLK_DEV_SD) for most USB storage devices.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ums-eneub6250.
203
204config USB_UAS
205 tristate "USB Attached SCSI"
206 depends on USB && SCSI
207 help
208 The USB Attached SCSI protocol is supported by some USB
209 storage devices. It permits higher performance by supporting
210 multiple outstanding commands.
211
212 If you don't know whether you have a UAS device, it is safe to
213 say 'Y' or 'M' here and the kernel will use the right driver.
214
215 If you compile this driver as a module, it will be named uas.
216
217config USB_LIBUSUAL
218 bool "The shared table of common (or usual) storage devices"
219 depends on USB
220 help
221 This module contains a table of common (or usual) devices
222 for usb-storage and ub drivers, and allows to switch binding
223 of these devices without rebuilding modules.
224
225 Typical syntax of /etc/modprobe.d/*conf is:
226
227 options libusual bias="ub"
228
229 If unsure, say N.