Loading...
1/*
2 SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
3 file Documentation/scsi/st.txt for more information.
4
5 History:
6 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
7 Contribution and ideas from several people including (in alphabetical
8 order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk,
9 Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
10 Michael Schaefer, J"org Weule, and Eric Youngdale.
11
12 Copyright 1992 - 2016 Kai Makisara
13 email Kai.Makisara@kolumbus.fi
14
15 Some small formal changes - aeb, 950809
16
17 Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
18 */
19
20static const char *verstr = "20160209";
21
22#include <linux/module.h>
23
24#include <linux/fs.h>
25#include <linux/kernel.h>
26#include <linux/sched.h>
27#include <linux/mm.h>
28#include <linux/init.h>
29#include <linux/string.h>
30#include <linux/slab.h>
31#include <linux/errno.h>
32#include <linux/mtio.h>
33#include <linux/cdrom.h>
34#include <linux/ioctl.h>
35#include <linux/fcntl.h>
36#include <linux/spinlock.h>
37#include <linux/blkdev.h>
38#include <linux/moduleparam.h>
39#include <linux/cdev.h>
40#include <linux/idr.h>
41#include <linux/delay.h>
42#include <linux/mutex.h>
43
44#include <asm/uaccess.h>
45#include <asm/dma.h>
46
47#include <scsi/scsi.h>
48#include <scsi/scsi_dbg.h>
49#include <scsi/scsi_device.h>
50#include <scsi/scsi_driver.h>
51#include <scsi/scsi_eh.h>
52#include <scsi/scsi_host.h>
53#include <scsi/scsi_ioctl.h>
54#include <scsi/sg.h>
55
56
57/* The driver prints some debugging information on the console if DEBUG
58 is defined and non-zero. */
59#define DEBUG 1
60#define NO_DEBUG 0
61
62#define ST_DEB_MSG KERN_NOTICE
63#if DEBUG
64/* The message level for the debug messages is currently set to KERN_NOTICE
65 so that people can easily see the messages. Later when the debugging messages
66 in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
67#define DEB(a) a
68#define DEBC(a) if (debugging) { a ; }
69#else
70#define DEB(a)
71#define DEBC(a)
72#endif
73
74#define ST_KILOBYTE 1024
75
76#include "st_options.h"
77#include "st.h"
78
79static int buffer_kbs;
80static int max_sg_segs;
81static int try_direct_io = TRY_DIRECT_IO;
82static int try_rdio = 1;
83static int try_wdio = 1;
84static int debug_flag;
85
86static struct class st_sysfs_class;
87static const struct attribute_group *st_dev_groups[];
88static const struct attribute_group *st_drv_groups[];
89
90MODULE_AUTHOR("Kai Makisara");
91MODULE_DESCRIPTION("SCSI tape (st) driver");
92MODULE_LICENSE("GPL");
93MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
94MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
95
96/* Set 'perm' (4th argument) to 0 to disable module_param's definition
97 * of sysfs parameters (which module_param doesn't yet support).
98 * Sysfs parameters defined explicitly later.
99 */
100module_param_named(buffer_kbs, buffer_kbs, int, 0);
101MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)");
102module_param_named(max_sg_segs, max_sg_segs, int, 0);
103MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)");
104module_param_named(try_direct_io, try_direct_io, int, 0);
105MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)");
106module_param_named(debug_flag, debug_flag, int, 0);
107MODULE_PARM_DESC(debug_flag, "Enable DEBUG, same as setting debugging=1");
108
109
110/* Extra parameters for testing */
111module_param_named(try_rdio, try_rdio, int, 0);
112MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible");
113module_param_named(try_wdio, try_wdio, int, 0);
114MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible");
115
116#ifndef MODULE
117static int write_threshold_kbs; /* retained for compatibility */
118static struct st_dev_parm {
119 char *name;
120 int *val;
121} parms[] __initdata = {
122 {
123 "buffer_kbs", &buffer_kbs
124 },
125 { /* Retained for compatibility with 2.4 */
126 "write_threshold_kbs", &write_threshold_kbs
127 },
128 {
129 "max_sg_segs", NULL
130 },
131 {
132 "try_direct_io", &try_direct_io
133 },
134 {
135 "debug_flag", &debug_flag
136 }
137};
138#endif
139
140/* Restrict the number of modes so that names for all are assigned */
141#if ST_NBR_MODES > 16
142#error "Maximum number of modes is 16"
143#endif
144/* Bit reversed order to get same names for same minors with all
145 mode counts */
146static const char *st_formats[] = {
147 "", "r", "k", "s", "l", "t", "o", "u",
148 "m", "v", "p", "x", "a", "y", "q", "z"};
149
150/* The default definitions have been moved to st_options.h */
151
152#define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE)
153
154/* The buffer size should fit into the 24 bits for length in the
155 6-byte SCSI read and write commands. */
156#if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1)
157#error "Buffer size should not exceed (2 << 24 - 1) bytes!"
158#endif
159
160static int debugging = DEBUG;
161
162#define MAX_RETRIES 0
163#define MAX_WRITE_RETRIES 0
164#define MAX_READY_RETRIES 0
165#define NO_TAPE NOT_READY
166
167#define ST_TIMEOUT (900 * HZ)
168#define ST_LONG_TIMEOUT (14000 * HZ)
169
170/* Remove mode bits and auto-rewind bit (7) */
171#define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \
172 (iminor(x) & ~(-1 << ST_MODE_SHIFT)) )
173#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
174
175/* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */
176#define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \
177 (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) )
178
179/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
180 24 bits) */
181#define SET_DENS_AND_BLK 0x10001
182
183static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE;
184static int st_max_sg_segs = ST_MAX_SG;
185
186static int modes_defined;
187
188static int enlarge_buffer(struct st_buffer *, int, int);
189static void clear_buffer(struct st_buffer *);
190static void normalize_buffer(struct st_buffer *);
191static int append_to_buffer(const char __user *, struct st_buffer *, int);
192static int from_buffer(struct st_buffer *, char __user *, int);
193static void move_buffer_data(struct st_buffer *, int);
194
195static int sgl_map_user_pages(struct st_buffer *, const unsigned int,
196 unsigned long, size_t, int);
197static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int);
198
199static int st_probe(struct device *);
200static int st_remove(struct device *);
201
202static struct scsi_driver st_template = {
203 .gendrv = {
204 .name = "st",
205 .owner = THIS_MODULE,
206 .probe = st_probe,
207 .remove = st_remove,
208 .groups = st_drv_groups,
209 },
210};
211
212static int st_compression(struct scsi_tape *, int);
213
214static int find_partition(struct scsi_tape *);
215static int switch_partition(struct scsi_tape *);
216
217static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long);
218
219static void scsi_tape_release(struct kref *);
220
221#define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref)
222
223static DEFINE_MUTEX(st_ref_mutex);
224static DEFINE_SPINLOCK(st_index_lock);
225static DEFINE_SPINLOCK(st_use_lock);
226static DEFINE_IDR(st_index_idr);
227
228
229
230#include "osst_detect.h"
231#ifndef SIGS_FROM_OSST
232#define SIGS_FROM_OSST \
233 {"OnStream", "SC-", "", "osst"}, \
234 {"OnStream", "DI-", "", "osst"}, \
235 {"OnStream", "DP-", "", "osst"}, \
236 {"OnStream", "USB", "", "osst"}, \
237 {"OnStream", "FW-", "", "osst"}
238#endif
239
240static struct scsi_tape *scsi_tape_get(int dev)
241{
242 struct scsi_tape *STp = NULL;
243
244 mutex_lock(&st_ref_mutex);
245 spin_lock(&st_index_lock);
246
247 STp = idr_find(&st_index_idr, dev);
248 if (!STp) goto out;
249
250 kref_get(&STp->kref);
251
252 if (!STp->device)
253 goto out_put;
254
255 if (scsi_device_get(STp->device))
256 goto out_put;
257
258 goto out;
259
260out_put:
261 kref_put(&STp->kref, scsi_tape_release);
262 STp = NULL;
263out:
264 spin_unlock(&st_index_lock);
265 mutex_unlock(&st_ref_mutex);
266 return STp;
267}
268
269static void scsi_tape_put(struct scsi_tape *STp)
270{
271 struct scsi_device *sdev = STp->device;
272
273 mutex_lock(&st_ref_mutex);
274 kref_put(&STp->kref, scsi_tape_release);
275 scsi_device_put(sdev);
276 mutex_unlock(&st_ref_mutex);
277}
278
279struct st_reject_data {
280 char *vendor;
281 char *model;
282 char *rev;
283 char *driver_hint; /* Name of the correct driver, NULL if unknown */
284};
285
286static struct st_reject_data reject_list[] = {
287 /* {"XXX", "Yy-", "", NULL}, example */
288 SIGS_FROM_OSST,
289 {NULL, }};
290
291/* If the device signature is on the list of incompatible drives, the
292 function returns a pointer to the name of the correct driver (if known) */
293static char * st_incompatible(struct scsi_device* SDp)
294{
295 struct st_reject_data *rp;
296
297 for (rp=&(reject_list[0]); rp->vendor != NULL; rp++)
298 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
299 !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
300 !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) {
301 if (rp->driver_hint)
302 return rp->driver_hint;
303 else
304 return "unknown";
305 }
306 return NULL;
307}
308
309
310static inline char *tape_name(struct scsi_tape *tape)
311{
312 return tape->disk->disk_name;
313}
314
315#define st_printk(prefix, t, fmt, a...) \
316 sdev_prefix_printk(prefix, (t)->device, tape_name(t), fmt, ##a)
317#ifdef DEBUG
318#define DEBC_printk(t, fmt, a...) \
319 if (debugging) { st_printk(ST_DEB_MSG, t, fmt, ##a ); }
320#else
321#define DEBC_printk(t, fmt, a...)
322#endif
323
324static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s)
325{
326 const u8 *ucp;
327 const u8 *sense = SRpnt->sense;
328
329 s->have_sense = scsi_normalize_sense(SRpnt->sense,
330 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
331 s->flags = 0;
332
333 if (s->have_sense) {
334 s->deferred = 0;
335 s->remainder_valid =
336 scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
337 switch (sense[0] & 0x7f) {
338 case 0x71:
339 s->deferred = 1;
340 case 0x70:
341 s->fixed_format = 1;
342 s->flags = sense[2] & 0xe0;
343 break;
344 case 0x73:
345 s->deferred = 1;
346 case 0x72:
347 s->fixed_format = 0;
348 ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
349 s->flags = ucp ? (ucp[3] & 0xe0) : 0;
350 break;
351 }
352 }
353}
354
355
356/* Convert the result to success code */
357static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
358{
359 int result = SRpnt->result;
360 u8 scode;
361 DEB(const char *stp;)
362 char *name = tape_name(STp);
363 struct st_cmdstatus *cmdstatp;
364
365 if (!result)
366 return 0;
367
368 cmdstatp = &STp->buffer->cmdstat;
369 st_analyze_sense(SRpnt, cmdstatp);
370
371 if (cmdstatp->have_sense)
372 scode = STp->buffer->cmdstat.sense_hdr.sense_key;
373 else
374 scode = 0;
375
376 DEB(
377 if (debugging) {
378 st_printk(ST_DEB_MSG, STp,
379 "Error: %x, cmd: %x %x %x %x %x %x\n", result,
380 SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
381 SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
382 if (cmdstatp->have_sense)
383 __scsi_print_sense(STp->device, name,
384 SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
385 } ) /* end DEB */
386 if (!debugging) { /* Abnormal conditions for tape */
387 if (!cmdstatp->have_sense)
388 st_printk(KERN_WARNING, STp,
389 "Error %x (driver bt 0x%x, host bt 0x%x).\n",
390 result, driver_byte(result), host_byte(result));
391 else if (cmdstatp->have_sense &&
392 scode != NO_SENSE &&
393 scode != RECOVERED_ERROR &&
394 /* scode != UNIT_ATTENTION && */
395 scode != BLANK_CHECK &&
396 scode != VOLUME_OVERFLOW &&
397 SRpnt->cmd[0] != MODE_SENSE &&
398 SRpnt->cmd[0] != TEST_UNIT_READY) {
399
400 __scsi_print_sense(STp->device, name,
401 SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
402 }
403 }
404
405 if (cmdstatp->fixed_format &&
406 STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */
407 if (STp->cln_sense_value)
408 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
409 STp->cln_sense_mask) == STp->cln_sense_value);
410 else
411 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
412 STp->cln_sense_mask) != 0);
413 }
414 if (cmdstatp->have_sense &&
415 cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17)
416 STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */
417
418 STp->pos_unknown |= STp->device->was_reset;
419
420 if (cmdstatp->have_sense &&
421 scode == RECOVERED_ERROR
422#if ST_RECOVERED_WRITE_FATAL
423 && SRpnt->cmd[0] != WRITE_6
424 && SRpnt->cmd[0] != WRITE_FILEMARKS
425#endif
426 ) {
427 STp->recover_count++;
428 STp->recover_reg++;
429
430 DEB(
431 if (debugging) {
432 if (SRpnt->cmd[0] == READ_6)
433 stp = "read";
434 else if (SRpnt->cmd[0] == WRITE_6)
435 stp = "write";
436 else
437 stp = "ioctl";
438 st_printk(ST_DEB_MSG, STp,
439 "Recovered %s error (%d).\n",
440 stp, STp->recover_count);
441 } ) /* end DEB */
442
443 if (cmdstatp->flags == 0)
444 return 0;
445 }
446 return (-EIO);
447}
448
449static struct st_request *st_allocate_request(struct scsi_tape *stp)
450{
451 struct st_request *streq;
452
453 streq = kzalloc(sizeof(*streq), GFP_KERNEL);
454 if (streq)
455 streq->stp = stp;
456 else {
457 st_printk(KERN_ERR, stp,
458 "Can't get SCSI request.\n");
459 if (signal_pending(current))
460 stp->buffer->syscall_result = -EINTR;
461 else
462 stp->buffer->syscall_result = -EBUSY;
463 }
464
465 return streq;
466}
467
468static void st_release_request(struct st_request *streq)
469{
470 kfree(streq);
471}
472
473static void st_do_stats(struct scsi_tape *STp, struct request *req)
474{
475 ktime_t now;
476
477 now = ktime_get();
478 if (req->cmd[0] == WRITE_6) {
479 now = ktime_sub(now, STp->stats->write_time);
480 atomic64_add(ktime_to_ns(now), &STp->stats->tot_write_time);
481 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
482 atomic64_inc(&STp->stats->write_cnt);
483 if (req->errors) {
484 atomic64_add(atomic_read(&STp->stats->last_write_size)
485 - STp->buffer->cmdstat.residual,
486 &STp->stats->write_byte_cnt);
487 if (STp->buffer->cmdstat.residual > 0)
488 atomic64_inc(&STp->stats->resid_cnt);
489 } else
490 atomic64_add(atomic_read(&STp->stats->last_write_size),
491 &STp->stats->write_byte_cnt);
492 } else if (req->cmd[0] == READ_6) {
493 now = ktime_sub(now, STp->stats->read_time);
494 atomic64_add(ktime_to_ns(now), &STp->stats->tot_read_time);
495 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
496 atomic64_inc(&STp->stats->read_cnt);
497 if (req->errors) {
498 atomic64_add(atomic_read(&STp->stats->last_read_size)
499 - STp->buffer->cmdstat.residual,
500 &STp->stats->read_byte_cnt);
501 if (STp->buffer->cmdstat.residual > 0)
502 atomic64_inc(&STp->stats->resid_cnt);
503 } else
504 atomic64_add(atomic_read(&STp->stats->last_read_size),
505 &STp->stats->read_byte_cnt);
506 } else {
507 now = ktime_sub(now, STp->stats->other_time);
508 atomic64_add(ktime_to_ns(now), &STp->stats->tot_io_time);
509 atomic64_inc(&STp->stats->other_cnt);
510 }
511 atomic64_dec(&STp->stats->in_flight);
512}
513
514static void st_scsi_execute_end(struct request *req, int uptodate)
515{
516 struct st_request *SRpnt = req->end_io_data;
517 struct scsi_tape *STp = SRpnt->stp;
518 struct bio *tmp;
519
520 STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
521 STp->buffer->cmdstat.residual = req->resid_len;
522
523 st_do_stats(STp, req);
524
525 tmp = SRpnt->bio;
526 if (SRpnt->waiting)
527 complete(SRpnt->waiting);
528
529 blk_rq_unmap_user(tmp);
530 __blk_put_request(req->q, req);
531}
532
533static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd,
534 int data_direction, void *buffer, unsigned bufflen,
535 int timeout, int retries)
536{
537 struct request *req;
538 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
539 int err = 0;
540 int write = (data_direction == DMA_TO_DEVICE);
541 struct scsi_tape *STp = SRpnt->stp;
542
543 req = blk_get_request(SRpnt->stp->device->request_queue, write,
544 GFP_KERNEL);
545 if (IS_ERR(req))
546 return DRIVER_ERROR << 24;
547
548 blk_rq_set_block_pc(req);
549 req->cmd_flags |= REQ_QUIET;
550
551 mdata->null_mapped = 1;
552
553 if (bufflen) {
554 err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen,
555 GFP_KERNEL);
556 if (err) {
557 blk_put_request(req);
558 return DRIVER_ERROR << 24;
559 }
560 }
561
562 atomic64_inc(&STp->stats->in_flight);
563 if (cmd[0] == WRITE_6) {
564 atomic_set(&STp->stats->last_write_size, bufflen);
565 STp->stats->write_time = ktime_get();
566 } else if (cmd[0] == READ_6) {
567 atomic_set(&STp->stats->last_read_size, bufflen);
568 STp->stats->read_time = ktime_get();
569 } else {
570 STp->stats->other_time = ktime_get();
571 }
572
573 SRpnt->bio = req->bio;
574 req->cmd_len = COMMAND_SIZE(cmd[0]);
575 memset(req->cmd, 0, BLK_MAX_CDB);
576 memcpy(req->cmd, cmd, req->cmd_len);
577 req->sense = SRpnt->sense;
578 req->sense_len = 0;
579 req->timeout = timeout;
580 req->retries = retries;
581 req->end_io_data = SRpnt;
582
583 blk_execute_rq_nowait(req->q, NULL, req, 1, st_scsi_execute_end);
584 return 0;
585}
586
587/* Do the scsi command. Waits until command performed if do_wait is true.
588 Otherwise write_behind_check() is used to check that the command
589 has finished. */
590static struct st_request *
591st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd,
592 int bytes, int direction, int timeout, int retries, int do_wait)
593{
594 struct completion *waiting;
595 struct rq_map_data *mdata = &STp->buffer->map_data;
596 int ret;
597
598 /* if async, make sure there's no command outstanding */
599 if (!do_wait && ((STp->buffer)->last_SRpnt)) {
600 st_printk(KERN_ERR, STp,
601 "Async command already active.\n");
602 if (signal_pending(current))
603 (STp->buffer)->syscall_result = (-EINTR);
604 else
605 (STp->buffer)->syscall_result = (-EBUSY);
606 return NULL;
607 }
608
609 if (!SRpnt) {
610 SRpnt = st_allocate_request(STp);
611 if (!SRpnt)
612 return NULL;
613 }
614
615 /* If async IO, set last_SRpnt. This ptr tells write_behind_check
616 which IO is outstanding. It's nulled out when the IO completes. */
617 if (!do_wait)
618 (STp->buffer)->last_SRpnt = SRpnt;
619
620 waiting = &STp->wait;
621 init_completion(waiting);
622 SRpnt->waiting = waiting;
623
624 if (STp->buffer->do_dio) {
625 mdata->page_order = 0;
626 mdata->nr_entries = STp->buffer->sg_segs;
627 mdata->pages = STp->buffer->mapped_pages;
628 } else {
629 mdata->page_order = STp->buffer->reserved_page_order;
630 mdata->nr_entries =
631 DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order);
632 mdata->pages = STp->buffer->reserved_pages;
633 mdata->offset = 0;
634 }
635
636 memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
637 STp->buffer->cmdstat.have_sense = 0;
638 STp->buffer->syscall_result = 0;
639
640 ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout,
641 retries);
642 if (ret) {
643 /* could not allocate the buffer or request was too large */
644 (STp->buffer)->syscall_result = (-EBUSY);
645 (STp->buffer)->last_SRpnt = NULL;
646 } else if (do_wait) {
647 wait_for_completion(waiting);
648 SRpnt->waiting = NULL;
649 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
650 }
651
652 return SRpnt;
653}
654
655
656/* Handle the write-behind checking (waits for completion). Returns -ENOSPC if
657 write has been correct but EOM early warning reached, -EIO if write ended in
658 error or zero if write successful. Asynchronous writes are used only in
659 variable block mode. */
660static int write_behind_check(struct scsi_tape * STp)
661{
662 int retval = 0;
663 struct st_buffer *STbuffer;
664 struct st_partstat *STps;
665 struct st_cmdstatus *cmdstatp;
666 struct st_request *SRpnt;
667
668 STbuffer = STp->buffer;
669 if (!STbuffer->writing)
670 return 0;
671
672 DEB(
673 if (STp->write_pending)
674 STp->nbr_waits++;
675 else
676 STp->nbr_finished++;
677 ) /* end DEB */
678
679 wait_for_completion(&(STp->wait));
680 SRpnt = STbuffer->last_SRpnt;
681 STbuffer->last_SRpnt = NULL;
682 SRpnt->waiting = NULL;
683
684 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
685 st_release_request(SRpnt);
686
687 STbuffer->buffer_bytes -= STbuffer->writing;
688 STps = &(STp->ps[STp->partition]);
689 if (STps->drv_block >= 0) {
690 if (STp->block_size == 0)
691 STps->drv_block++;
692 else
693 STps->drv_block += STbuffer->writing / STp->block_size;
694 }
695
696 cmdstatp = &STbuffer->cmdstat;
697 if (STbuffer->syscall_result) {
698 retval = -EIO;
699 if (cmdstatp->have_sense && !cmdstatp->deferred &&
700 (cmdstatp->flags & SENSE_EOM) &&
701 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
702 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) {
703 /* EOM at write-behind, has all data been written? */
704 if (!cmdstatp->remainder_valid ||
705 cmdstatp->uremainder64 == 0)
706 retval = -ENOSPC;
707 }
708 if (retval == -EIO)
709 STps->drv_block = -1;
710 }
711 STbuffer->writing = 0;
712
713 DEB(if (debugging && retval)
714 st_printk(ST_DEB_MSG, STp,
715 "Async write error %x, return value %d.\n",
716 STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */
717
718 return retval;
719}
720
721
722/* Step over EOF if it has been inadvertently crossed (ioctl not used because
723 it messes up the block number). */
724static int cross_eof(struct scsi_tape * STp, int forward)
725{
726 struct st_request *SRpnt;
727 unsigned char cmd[MAX_COMMAND_SIZE];
728
729 cmd[0] = SPACE;
730 cmd[1] = 0x01; /* Space FileMarks */
731 if (forward) {
732 cmd[2] = cmd[3] = 0;
733 cmd[4] = 1;
734 } else
735 cmd[2] = cmd[3] = cmd[4] = 0xff; /* -1 filemarks */
736 cmd[5] = 0;
737
738 DEBC_printk(STp, "Stepping over filemark %s.\n",
739 forward ? "forward" : "backward");
740
741 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
742 STp->device->request_queue->rq_timeout,
743 MAX_RETRIES, 1);
744 if (!SRpnt)
745 return (STp->buffer)->syscall_result;
746
747 st_release_request(SRpnt);
748 SRpnt = NULL;
749
750 if ((STp->buffer)->cmdstat.midlevel_result != 0)
751 st_printk(KERN_ERR, STp,
752 "Stepping over filemark %s failed.\n",
753 forward ? "forward" : "backward");
754
755 return (STp->buffer)->syscall_result;
756}
757
758
759/* Flush the write buffer (never need to write if variable blocksize). */
760static int st_flush_write_buffer(struct scsi_tape * STp)
761{
762 int transfer, blks;
763 int result;
764 unsigned char cmd[MAX_COMMAND_SIZE];
765 struct st_request *SRpnt;
766 struct st_partstat *STps;
767
768 result = write_behind_check(STp);
769 if (result)
770 return result;
771
772 result = 0;
773 if (STp->dirty == 1) {
774
775 transfer = STp->buffer->buffer_bytes;
776 DEBC_printk(STp, "Flushing %d bytes.\n", transfer);
777
778 memset(cmd, 0, MAX_COMMAND_SIZE);
779 cmd[0] = WRITE_6;
780 cmd[1] = 1;
781 blks = transfer / STp->block_size;
782 cmd[2] = blks >> 16;
783 cmd[3] = blks >> 8;
784 cmd[4] = blks;
785
786 SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE,
787 STp->device->request_queue->rq_timeout,
788 MAX_WRITE_RETRIES, 1);
789 if (!SRpnt)
790 return (STp->buffer)->syscall_result;
791
792 STps = &(STp->ps[STp->partition]);
793 if ((STp->buffer)->syscall_result != 0) {
794 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
795
796 if (cmdstatp->have_sense && !cmdstatp->deferred &&
797 (cmdstatp->flags & SENSE_EOM) &&
798 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
799 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
800 (!cmdstatp->remainder_valid ||
801 cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */
802 STp->dirty = 0;
803 (STp->buffer)->buffer_bytes = 0;
804 if (STps->drv_block >= 0)
805 STps->drv_block += blks;
806 result = (-ENOSPC);
807 } else {
808 st_printk(KERN_ERR, STp, "Error on flush.\n");
809 STps->drv_block = (-1);
810 result = (-EIO);
811 }
812 } else {
813 if (STps->drv_block >= 0)
814 STps->drv_block += blks;
815 STp->dirty = 0;
816 (STp->buffer)->buffer_bytes = 0;
817 }
818 st_release_request(SRpnt);
819 SRpnt = NULL;
820 }
821 return result;
822}
823
824
825/* Flush the tape buffer. The tape will be positioned correctly unless
826 seek_next is true. */
827static int flush_buffer(struct scsi_tape *STp, int seek_next)
828{
829 int backspace, result;
830 struct st_buffer *STbuffer;
831 struct st_partstat *STps;
832
833 STbuffer = STp->buffer;
834
835 /*
836 * If there was a bus reset, block further access
837 * to this device.
838 */
839 if (STp->pos_unknown)
840 return (-EIO);
841
842 if (STp->ready != ST_READY)
843 return 0;
844 STps = &(STp->ps[STp->partition]);
845 if (STps->rw == ST_WRITING) /* Writing */
846 return st_flush_write_buffer(STp);
847
848 if (STp->block_size == 0)
849 return 0;
850
851 backspace = ((STp->buffer)->buffer_bytes +
852 (STp->buffer)->read_pointer) / STp->block_size -
853 ((STp->buffer)->read_pointer + STp->block_size - 1) /
854 STp->block_size;
855 (STp->buffer)->buffer_bytes = 0;
856 (STp->buffer)->read_pointer = 0;
857 result = 0;
858 if (!seek_next) {
859 if (STps->eof == ST_FM_HIT) {
860 result = cross_eof(STp, 0); /* Back over the EOF hit */
861 if (!result)
862 STps->eof = ST_NOEOF;
863 else {
864 if (STps->drv_file >= 0)
865 STps->drv_file++;
866 STps->drv_block = 0;
867 }
868 }
869 if (!result && backspace > 0)
870 result = st_int_ioctl(STp, MTBSR, backspace);
871 } else if (STps->eof == ST_FM_HIT) {
872 if (STps->drv_file >= 0)
873 STps->drv_file++;
874 STps->drv_block = 0;
875 STps->eof = ST_NOEOF;
876 }
877 return result;
878
879}
880
881/* Set the mode parameters */
882static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm)
883{
884 int set_it = 0;
885 unsigned long arg;
886
887 if (!STp->density_changed &&
888 STm->default_density >= 0 &&
889 STm->default_density != STp->density) {
890 arg = STm->default_density;
891 set_it = 1;
892 } else
893 arg = STp->density;
894 arg <<= MT_ST_DENSITY_SHIFT;
895 if (!STp->blksize_changed &&
896 STm->default_blksize >= 0 &&
897 STm->default_blksize != STp->block_size) {
898 arg |= STm->default_blksize;
899 set_it = 1;
900 } else
901 arg |= STp->block_size;
902 if (set_it &&
903 st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) {
904 st_printk(KERN_WARNING, STp,
905 "Can't set default block size to %d bytes "
906 "and density %x.\n",
907 STm->default_blksize, STm->default_density);
908 if (modes_defined)
909 return (-EINVAL);
910 }
911 return 0;
912}
913
914
915/* Lock or unlock the drive door. Don't use when st_request allocated. */
916static int do_door_lock(struct scsi_tape * STp, int do_lock)
917{
918 int retval;
919
920 DEBC_printk(STp, "%socking drive door.\n", do_lock ? "L" : "Unl");
921
922 retval = scsi_set_medium_removal(STp->device,
923 do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW);
924 if (!retval)
925 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
926 else
927 STp->door_locked = ST_LOCK_FAILS;
928 return retval;
929}
930
931
932/* Set the internal state after reset */
933static void reset_state(struct scsi_tape *STp)
934{
935 int i;
936 struct st_partstat *STps;
937
938 STp->pos_unknown = 0;
939 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
940 STps = &(STp->ps[i]);
941 STps->rw = ST_IDLE;
942 STps->eof = ST_NOEOF;
943 STps->at_sm = 0;
944 STps->last_block_valid = 0;
945 STps->drv_block = -1;
946 STps->drv_file = -1;
947 }
948 if (STp->can_partitions) {
949 STp->partition = find_partition(STp);
950 if (STp->partition < 0)
951 STp->partition = 0;
952 STp->new_partition = STp->partition;
953 }
954}
955
956/* Test if the drive is ready. Returns either one of the codes below or a negative system
957 error code. */
958#define CHKRES_READY 0
959#define CHKRES_NEW_SESSION 1
960#define CHKRES_NOT_READY 2
961#define CHKRES_NO_TAPE 3
962
963#define MAX_ATTENTIONS 10
964
965static int test_ready(struct scsi_tape *STp, int do_wait)
966{
967 int attentions, waits, max_wait, scode;
968 int retval = CHKRES_READY, new_session = 0;
969 unsigned char cmd[MAX_COMMAND_SIZE];
970 struct st_request *SRpnt = NULL;
971 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
972
973 max_wait = do_wait ? ST_BLOCK_SECONDS : 0;
974
975 for (attentions=waits=0; ; ) {
976 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
977 cmd[0] = TEST_UNIT_READY;
978 SRpnt = st_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
979 STp->long_timeout, MAX_READY_RETRIES, 1);
980
981 if (!SRpnt) {
982 retval = (STp->buffer)->syscall_result;
983 break;
984 }
985
986 if (cmdstatp->have_sense) {
987
988 scode = cmdstatp->sense_hdr.sense_key;
989
990 if (scode == UNIT_ATTENTION) { /* New media? */
991 new_session = 1;
992 if (attentions < MAX_ATTENTIONS) {
993 attentions++;
994 continue;
995 }
996 else {
997 retval = (-EIO);
998 break;
999 }
1000 }
1001
1002 if (scode == NOT_READY) {
1003 if (waits < max_wait) {
1004 if (msleep_interruptible(1000)) {
1005 retval = (-EINTR);
1006 break;
1007 }
1008 waits++;
1009 continue;
1010 }
1011 else {
1012 if ((STp->device)->scsi_level >= SCSI_2 &&
1013 cmdstatp->sense_hdr.asc == 0x3a) /* Check ASC */
1014 retval = CHKRES_NO_TAPE;
1015 else
1016 retval = CHKRES_NOT_READY;
1017 break;
1018 }
1019 }
1020 }
1021
1022 retval = (STp->buffer)->syscall_result;
1023 if (!retval)
1024 retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY;
1025 break;
1026 }
1027
1028 if (SRpnt != NULL)
1029 st_release_request(SRpnt);
1030 return retval;
1031}
1032
1033
1034/* See if the drive is ready and gather information about the tape. Return values:
1035 < 0 negative error code from errno.h
1036 0 drive ready
1037 1 drive not ready (possibly no tape)
1038*/
1039static int check_tape(struct scsi_tape *STp, struct file *filp)
1040{
1041 int i, retval, new_session = 0, do_wait;
1042 unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning;
1043 unsigned short st_flags = filp->f_flags;
1044 struct st_request *SRpnt = NULL;
1045 struct st_modedef *STm;
1046 struct st_partstat *STps;
1047 struct inode *inode = file_inode(filp);
1048 int mode = TAPE_MODE(inode);
1049
1050 STp->ready = ST_READY;
1051
1052 if (mode != STp->current_mode) {
1053 DEBC_printk(STp, "Mode change from %d to %d.\n",
1054 STp->current_mode, mode);
1055 new_session = 1;
1056 STp->current_mode = mode;
1057 }
1058 STm = &(STp->modes[STp->current_mode]);
1059
1060 saved_cleaning = STp->cleaning_req;
1061 STp->cleaning_req = 0;
1062
1063 do_wait = ((filp->f_flags & O_NONBLOCK) == 0);
1064 retval = test_ready(STp, do_wait);
1065
1066 if (retval < 0)
1067 goto err_out;
1068
1069 if (retval == CHKRES_NEW_SESSION) {
1070 STp->pos_unknown = 0;
1071 STp->partition = STp->new_partition = 0;
1072 if (STp->can_partitions)
1073 STp->nbr_partitions = 1; /* This guess will be updated later
1074 if necessary */
1075 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1076 STps = &(STp->ps[i]);
1077 STps->rw = ST_IDLE;
1078 STps->eof = ST_NOEOF;
1079 STps->at_sm = 0;
1080 STps->last_block_valid = 0;
1081 STps->drv_block = 0;
1082 STps->drv_file = 0;
1083 }
1084 new_session = 1;
1085 }
1086 else {
1087 STp->cleaning_req |= saved_cleaning;
1088
1089 if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) {
1090 if (retval == CHKRES_NO_TAPE)
1091 STp->ready = ST_NO_TAPE;
1092 else
1093 STp->ready = ST_NOT_READY;
1094
1095 STp->density = 0; /* Clear the erroneous "residue" */
1096 STp->write_prot = 0;
1097 STp->block_size = 0;
1098 STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
1099 STp->partition = STp->new_partition = 0;
1100 STp->door_locked = ST_UNLOCKED;
1101 return CHKRES_NOT_READY;
1102 }
1103 }
1104
1105 if (STp->omit_blklims)
1106 STp->min_block = STp->max_block = (-1);
1107 else {
1108 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1109 cmd[0] = READ_BLOCK_LIMITS;
1110
1111 SRpnt = st_do_scsi(SRpnt, STp, cmd, 6, DMA_FROM_DEVICE,
1112 STp->device->request_queue->rq_timeout,
1113 MAX_READY_RETRIES, 1);
1114 if (!SRpnt) {
1115 retval = (STp->buffer)->syscall_result;
1116 goto err_out;
1117 }
1118
1119 if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) {
1120 STp->max_block = ((STp->buffer)->b_data[1] << 16) |
1121 ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3];
1122 STp->min_block = ((STp->buffer)->b_data[4] << 8) |
1123 (STp->buffer)->b_data[5];
1124 if ( DEB( debugging || ) !STp->inited)
1125 st_printk(KERN_INFO, STp,
1126 "Block limits %d - %d bytes.\n",
1127 STp->min_block, STp->max_block);
1128 } else {
1129 STp->min_block = STp->max_block = (-1);
1130 DEBC_printk(STp, "Can't read block limits.\n");
1131 }
1132 }
1133
1134 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1135 cmd[0] = MODE_SENSE;
1136 cmd[4] = 12;
1137
1138 SRpnt = st_do_scsi(SRpnt, STp, cmd, 12, DMA_FROM_DEVICE,
1139 STp->device->request_queue->rq_timeout,
1140 MAX_READY_RETRIES, 1);
1141 if (!SRpnt) {
1142 retval = (STp->buffer)->syscall_result;
1143 goto err_out;
1144 }
1145
1146 if ((STp->buffer)->syscall_result != 0) {
1147 DEBC_printk(STp, "No Mode Sense.\n");
1148 STp->block_size = ST_DEFAULT_BLOCK; /* Educated guess (?) */
1149 (STp->buffer)->syscall_result = 0; /* Prevent error propagation */
1150 STp->drv_write_prot = 0;
1151 } else {
1152 DEBC_printk(STp,"Mode sense. Length %d, "
1153 "medium %x, WBS %x, BLL %d\n",
1154 (STp->buffer)->b_data[0],
1155 (STp->buffer)->b_data[1],
1156 (STp->buffer)->b_data[2],
1157 (STp->buffer)->b_data[3]);
1158
1159 if ((STp->buffer)->b_data[3] >= 8) {
1160 STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7;
1161 STp->density = (STp->buffer)->b_data[4];
1162 STp->block_size = (STp->buffer)->b_data[9] * 65536 +
1163 (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11];
1164 DEBC_printk(STp, "Density %x, tape length: %x, "
1165 "drv buffer: %d\n",
1166 STp->density,
1167 (STp->buffer)->b_data[5] * 65536 +
1168 (STp->buffer)->b_data[6] * 256 +
1169 (STp->buffer)->b_data[7],
1170 STp->drv_buffer);
1171 }
1172 STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0;
1173 if (!STp->drv_buffer && STp->immediate_filemark) {
1174 st_printk(KERN_WARNING, STp,
1175 "non-buffered tape: disabling "
1176 "writing immediate filemarks\n");
1177 STp->immediate_filemark = 0;
1178 }
1179 }
1180 st_release_request(SRpnt);
1181 SRpnt = NULL;
1182 STp->inited = 1;
1183
1184 if (STp->block_size > 0)
1185 (STp->buffer)->buffer_blocks =
1186 (STp->buffer)->buffer_size / STp->block_size;
1187 else
1188 (STp->buffer)->buffer_blocks = 1;
1189 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
1190
1191 DEBC_printk(STp, "Block size: %d, buffer size: %d (%d blocks).\n",
1192 STp->block_size, (STp->buffer)->buffer_size,
1193 (STp->buffer)->buffer_blocks);
1194
1195 if (STp->drv_write_prot) {
1196 STp->write_prot = 1;
1197
1198 DEBC_printk(STp, "Write protected\n");
1199
1200 if (do_wait &&
1201 ((st_flags & O_ACCMODE) == O_WRONLY ||
1202 (st_flags & O_ACCMODE) == O_RDWR)) {
1203 retval = (-EROFS);
1204 goto err_out;
1205 }
1206 }
1207
1208 if (STp->can_partitions && STp->nbr_partitions < 1) {
1209 /* This code is reached when the device is opened for the first time
1210 after the driver has been initialized with tape in the drive and the
1211 partition support has been enabled. */
1212 DEBC_printk(STp, "Updating partition number in status.\n");
1213 if ((STp->partition = find_partition(STp)) < 0) {
1214 retval = STp->partition;
1215 goto err_out;
1216 }
1217 STp->new_partition = STp->partition;
1218 STp->nbr_partitions = 1; /* This guess will be updated when necessary */
1219 }
1220
1221 if (new_session) { /* Change the drive parameters for the new mode */
1222 STp->density_changed = STp->blksize_changed = 0;
1223 STp->compression_changed = 0;
1224 if (!(STm->defaults_for_writes) &&
1225 (retval = set_mode_densblk(STp, STm)) < 0)
1226 goto err_out;
1227
1228 if (STp->default_drvbuffer != 0xff) {
1229 if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer))
1230 st_printk(KERN_WARNING, STp,
1231 "Can't set default drive "
1232 "buffering to %d.\n",
1233 STp->default_drvbuffer);
1234 }
1235 }
1236
1237 return CHKRES_READY;
1238
1239 err_out:
1240 return retval;
1241}
1242
1243
1244 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host
1245 module count. */
1246static int st_open(struct inode *inode, struct file *filp)
1247{
1248 int i, retval = (-EIO);
1249 int resumed = 0;
1250 struct scsi_tape *STp;
1251 struct st_partstat *STps;
1252 int dev = TAPE_NR(inode);
1253
1254 /*
1255 * We really want to do nonseekable_open(inode, filp); here, but some
1256 * versions of tar incorrectly call lseek on tapes and bail out if that
1257 * fails. So we disallow pread() and pwrite(), but permit lseeks.
1258 */
1259 filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
1260
1261 if (!(STp = scsi_tape_get(dev))) {
1262 return -ENXIO;
1263 }
1264
1265 filp->private_data = STp;
1266
1267 spin_lock(&st_use_lock);
1268 if (STp->in_use) {
1269 spin_unlock(&st_use_lock);
1270 scsi_tape_put(STp);
1271 DEBC_printk(STp, "Device already in use.\n");
1272 return (-EBUSY);
1273 }
1274
1275 STp->in_use = 1;
1276 spin_unlock(&st_use_lock);
1277 STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0;
1278
1279 if (scsi_autopm_get_device(STp->device) < 0) {
1280 retval = -EIO;
1281 goto err_out;
1282 }
1283 resumed = 1;
1284 if (!scsi_block_when_processing_errors(STp->device)) {
1285 retval = (-ENXIO);
1286 goto err_out;
1287 }
1288
1289 /* See that we have at least a one page buffer available */
1290 if (!enlarge_buffer(STp->buffer, PAGE_SIZE, STp->restr_dma)) {
1291 st_printk(KERN_WARNING, STp,
1292 "Can't allocate one page tape buffer.\n");
1293 retval = (-EOVERFLOW);
1294 goto err_out;
1295 }
1296
1297 (STp->buffer)->cleared = 0;
1298 (STp->buffer)->writing = 0;
1299 (STp->buffer)->syscall_result = 0;
1300
1301 STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY);
1302
1303 STp->dirty = 0;
1304 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1305 STps = &(STp->ps[i]);
1306 STps->rw = ST_IDLE;
1307 }
1308 STp->try_dio_now = STp->try_dio;
1309 STp->recover_count = 0;
1310 DEB( STp->nbr_waits = STp->nbr_finished = 0;
1311 STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; )
1312
1313 retval = check_tape(STp, filp);
1314 if (retval < 0)
1315 goto err_out;
1316 if ((filp->f_flags & O_NONBLOCK) == 0 &&
1317 retval != CHKRES_READY) {
1318 if (STp->ready == NO_TAPE)
1319 retval = (-ENOMEDIUM);
1320 else
1321 retval = (-EIO);
1322 goto err_out;
1323 }
1324 return 0;
1325
1326 err_out:
1327 normalize_buffer(STp->buffer);
1328 spin_lock(&st_use_lock);
1329 STp->in_use = 0;
1330 spin_unlock(&st_use_lock);
1331 if (resumed)
1332 scsi_autopm_put_device(STp->device);
1333 scsi_tape_put(STp);
1334 return retval;
1335
1336}
1337
1338
1339/* Flush the tape buffer before close */
1340static int st_flush(struct file *filp, fl_owner_t id)
1341{
1342 int result = 0, result2;
1343 unsigned char cmd[MAX_COMMAND_SIZE];
1344 struct st_request *SRpnt;
1345 struct scsi_tape *STp = filp->private_data;
1346 struct st_modedef *STm = &(STp->modes[STp->current_mode]);
1347 struct st_partstat *STps = &(STp->ps[STp->partition]);
1348
1349 if (file_count(filp) > 1)
1350 return 0;
1351
1352 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1353 result = st_flush_write_buffer(STp);
1354 if (result != 0 && result != (-ENOSPC))
1355 goto out;
1356 }
1357
1358 if (STp->can_partitions &&
1359 (result2 = switch_partition(STp)) < 0) {
1360 DEBC_printk(STp, "switch_partition at close failed.\n");
1361 if (result == 0)
1362 result = result2;
1363 goto out;
1364 }
1365
1366 DEBC( if (STp->nbr_requests)
1367 st_printk(KERN_DEBUG, STp,
1368 "Number of r/w requests %d, dio used in %d, "
1369 "pages %d.\n", STp->nbr_requests, STp->nbr_dio,
1370 STp->nbr_pages));
1371
1372 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1373 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1374
1375#if DEBUG
1376 DEBC_printk(STp, "Async write waits %d, finished %d.\n",
1377 STp->nbr_waits, STp->nbr_finished);
1378#endif
1379 memset(cmd, 0, MAX_COMMAND_SIZE);
1380 cmd[0] = WRITE_FILEMARKS;
1381 if (STp->immediate_filemark)
1382 cmd[1] = 1;
1383 cmd[4] = 1 + STp->two_fm;
1384
1385 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
1386 STp->device->request_queue->rq_timeout,
1387 MAX_WRITE_RETRIES, 1);
1388 if (!SRpnt) {
1389 result = (STp->buffer)->syscall_result;
1390 goto out;
1391 }
1392
1393 if (STp->buffer->syscall_result == 0 ||
1394 (cmdstatp->have_sense && !cmdstatp->deferred &&
1395 (cmdstatp->flags & SENSE_EOM) &&
1396 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
1397 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
1398 (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) {
1399 /* Write successful at EOM */
1400 st_release_request(SRpnt);
1401 SRpnt = NULL;
1402 if (STps->drv_file >= 0)
1403 STps->drv_file++;
1404 STps->drv_block = 0;
1405 if (STp->two_fm)
1406 cross_eof(STp, 0);
1407 STps->eof = ST_FM;
1408 }
1409 else { /* Write error */
1410 st_release_request(SRpnt);
1411 SRpnt = NULL;
1412 st_printk(KERN_ERR, STp,
1413 "Error on write filemark.\n");
1414 if (result == 0)
1415 result = (-EIO);
1416 }
1417
1418 DEBC_printk(STp, "Buffer flushed, %d EOF(s) written\n", cmd[4]);
1419 } else if (!STp->rew_at_close) {
1420 STps = &(STp->ps[STp->partition]);
1421 if (!STm->sysv || STps->rw != ST_READING) {
1422 if (STp->can_bsr)
1423 result = flush_buffer(STp, 0);
1424 else if (STps->eof == ST_FM_HIT) {
1425 result = cross_eof(STp, 0);
1426 if (result) {
1427 if (STps->drv_file >= 0)
1428 STps->drv_file++;
1429 STps->drv_block = 0;
1430 STps->eof = ST_FM;
1431 } else
1432 STps->eof = ST_NOEOF;
1433 }
1434 } else if ((STps->eof == ST_NOEOF &&
1435 !(result = cross_eof(STp, 1))) ||
1436 STps->eof == ST_FM_HIT) {
1437 if (STps->drv_file >= 0)
1438 STps->drv_file++;
1439 STps->drv_block = 0;
1440 STps->eof = ST_FM;
1441 }
1442 }
1443
1444 out:
1445 if (STp->rew_at_close) {
1446 result2 = st_int_ioctl(STp, MTREW, 1);
1447 if (result == 0)
1448 result = result2;
1449 }
1450 return result;
1451}
1452
1453
1454/* Close the device and release it. BKL is not needed: this is the only thread
1455 accessing this tape. */
1456static int st_release(struct inode *inode, struct file *filp)
1457{
1458 int result = 0;
1459 struct scsi_tape *STp = filp->private_data;
1460
1461 if (STp->door_locked == ST_LOCKED_AUTO)
1462 do_door_lock(STp, 0);
1463
1464 normalize_buffer(STp->buffer);
1465 spin_lock(&st_use_lock);
1466 STp->in_use = 0;
1467 spin_unlock(&st_use_lock);
1468 scsi_autopm_put_device(STp->device);
1469 scsi_tape_put(STp);
1470
1471 return result;
1472}
1473
1474/* The checks common to both reading and writing */
1475static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count)
1476{
1477 ssize_t retval = 0;
1478
1479 /*
1480 * If we are in the middle of error recovery, don't let anyone
1481 * else try and use this device. Also, if error recovery fails, it
1482 * may try and take the device offline, in which case all further
1483 * access to the device is prohibited.
1484 */
1485 if (!scsi_block_when_processing_errors(STp->device)) {
1486 retval = (-ENXIO);
1487 goto out;
1488 }
1489
1490 if (STp->ready != ST_READY) {
1491 if (STp->ready == ST_NO_TAPE)
1492 retval = (-ENOMEDIUM);
1493 else
1494 retval = (-EIO);
1495 goto out;
1496 }
1497
1498 if (! STp->modes[STp->current_mode].defined) {
1499 retval = (-ENXIO);
1500 goto out;
1501 }
1502
1503
1504 /*
1505 * If there was a bus reset, block further access
1506 * to this device.
1507 */
1508 if (STp->pos_unknown) {
1509 retval = (-EIO);
1510 goto out;
1511 }
1512
1513 if (count == 0)
1514 goto out;
1515
1516 DEB(
1517 if (!STp->in_use) {
1518 st_printk(ST_DEB_MSG, STp,
1519 "Incorrect device.\n");
1520 retval = (-EIO);
1521 goto out;
1522 } ) /* end DEB */
1523
1524 if (STp->can_partitions &&
1525 (retval = switch_partition(STp)) < 0)
1526 goto out;
1527
1528 if (STp->block_size == 0 && STp->max_block > 0 &&
1529 (count < STp->min_block || count > STp->max_block)) {
1530 retval = (-EINVAL);
1531 goto out;
1532 }
1533
1534 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED &&
1535 !do_door_lock(STp, 1))
1536 STp->door_locked = ST_LOCKED_AUTO;
1537
1538 out:
1539 return retval;
1540}
1541
1542
1543static int setup_buffering(struct scsi_tape *STp, const char __user *buf,
1544 size_t count, int is_read)
1545{
1546 int i, bufsize, retval = 0;
1547 struct st_buffer *STbp = STp->buffer;
1548
1549 if (is_read)
1550 i = STp->try_dio_now && try_rdio;
1551 else
1552 i = STp->try_dio_now && try_wdio;
1553
1554 if (i && ((unsigned long)buf & queue_dma_alignment(
1555 STp->device->request_queue)) == 0) {
1556 i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf,
1557 count, (is_read ? READ : WRITE));
1558 if (i > 0) {
1559 STbp->do_dio = i;
1560 STbp->buffer_bytes = 0; /* can be used as transfer counter */
1561 }
1562 else
1563 STbp->do_dio = 0; /* fall back to buffering with any error */
1564 STbp->sg_segs = STbp->do_dio;
1565 DEB(
1566 if (STbp->do_dio) {
1567 STp->nbr_dio++;
1568 STp->nbr_pages += STbp->do_dio;
1569 }
1570 )
1571 } else
1572 STbp->do_dio = 0;
1573 DEB( STp->nbr_requests++; )
1574
1575 if (!STbp->do_dio) {
1576 if (STp->block_size)
1577 bufsize = STp->block_size > st_fixed_buffer_size ?
1578 STp->block_size : st_fixed_buffer_size;
1579 else {
1580 bufsize = count;
1581 /* Make sure that data from previous user is not leaked even if
1582 HBA does not return correct residual */
1583 if (is_read && STp->sili && !STbp->cleared)
1584 clear_buffer(STbp);
1585 }
1586
1587 if (bufsize > STbp->buffer_size &&
1588 !enlarge_buffer(STbp, bufsize, STp->restr_dma)) {
1589 st_printk(KERN_WARNING, STp,
1590 "Can't allocate %d byte tape buffer.\n",
1591 bufsize);
1592 retval = (-EOVERFLOW);
1593 goto out;
1594 }
1595 if (STp->block_size)
1596 STbp->buffer_blocks = bufsize / STp->block_size;
1597 }
1598
1599 out:
1600 return retval;
1601}
1602
1603
1604/* Can be called more than once after each setup_buffer() */
1605static void release_buffering(struct scsi_tape *STp, int is_read)
1606{
1607 struct st_buffer *STbp;
1608
1609 STbp = STp->buffer;
1610 if (STbp->do_dio) {
1611 sgl_unmap_user_pages(STbp, STbp->do_dio, is_read);
1612 STbp->do_dio = 0;
1613 STbp->sg_segs = 0;
1614 }
1615}
1616
1617
1618/* Write command */
1619static ssize_t
1620st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
1621{
1622 ssize_t total;
1623 ssize_t i, do_count, blks, transfer;
1624 ssize_t retval;
1625 int undone, retry_eot = 0, scode;
1626 int async_write;
1627 unsigned char cmd[MAX_COMMAND_SIZE];
1628 const char __user *b_point;
1629 struct st_request *SRpnt = NULL;
1630 struct scsi_tape *STp = filp->private_data;
1631 struct st_modedef *STm;
1632 struct st_partstat *STps;
1633 struct st_buffer *STbp;
1634
1635 if (mutex_lock_interruptible(&STp->lock))
1636 return -ERESTARTSYS;
1637
1638 retval = rw_checks(STp, filp, count);
1639 if (retval || count == 0)
1640 goto out;
1641
1642 /* Write must be integral number of blocks */
1643 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
1644 st_printk(KERN_WARNING, STp,
1645 "Write not multiple of tape block size.\n");
1646 retval = (-EINVAL);
1647 goto out;
1648 }
1649
1650 STm = &(STp->modes[STp->current_mode]);
1651 STps = &(STp->ps[STp->partition]);
1652
1653 if (STp->write_prot) {
1654 retval = (-EACCES);
1655 goto out;
1656 }
1657
1658
1659 if (STps->rw == ST_READING) {
1660 retval = flush_buffer(STp, 0);
1661 if (retval)
1662 goto out;
1663 STps->rw = ST_WRITING;
1664 } else if (STps->rw != ST_WRITING &&
1665 STps->drv_file == 0 && STps->drv_block == 0) {
1666 if ((retval = set_mode_densblk(STp, STm)) < 0)
1667 goto out;
1668 if (STm->default_compression != ST_DONT_TOUCH &&
1669 !(STp->compression_changed)) {
1670 if (st_compression(STp, (STm->default_compression == ST_YES))) {
1671 st_printk(KERN_WARNING, STp,
1672 "Can't set default compression.\n");
1673 if (modes_defined) {
1674 retval = (-EINVAL);
1675 goto out;
1676 }
1677 }
1678 }
1679 }
1680
1681 STbp = STp->buffer;
1682 i = write_behind_check(STp);
1683 if (i) {
1684 if (i == -ENOSPC)
1685 STps->eof = ST_EOM_OK;
1686 else
1687 STps->eof = ST_EOM_ERROR;
1688 }
1689
1690 if (STps->eof == ST_EOM_OK) {
1691 STps->eof = ST_EOD_1; /* allow next write */
1692 retval = (-ENOSPC);
1693 goto out;
1694 }
1695 else if (STps->eof == ST_EOM_ERROR) {
1696 retval = (-EIO);
1697 goto out;
1698 }
1699
1700 /* Check the buffer readability in cases where copy_user might catch
1701 the problems after some tape movement. */
1702 if (STp->block_size != 0 &&
1703 !STbp->do_dio &&
1704 (copy_from_user(&i, buf, 1) != 0 ||
1705 copy_from_user(&i, buf + count - 1, 1) != 0)) {
1706 retval = (-EFAULT);
1707 goto out;
1708 }
1709
1710 retval = setup_buffering(STp, buf, count, 0);
1711 if (retval)
1712 goto out;
1713
1714 total = count;
1715
1716 memset(cmd, 0, MAX_COMMAND_SIZE);
1717 cmd[0] = WRITE_6;
1718 cmd[1] = (STp->block_size != 0);
1719
1720 STps->rw = ST_WRITING;
1721
1722 b_point = buf;
1723 while (count > 0 && !retry_eot) {
1724
1725 if (STbp->do_dio) {
1726 do_count = count;
1727 }
1728 else {
1729 if (STp->block_size == 0)
1730 do_count = count;
1731 else {
1732 do_count = STbp->buffer_blocks * STp->block_size -
1733 STbp->buffer_bytes;
1734 if (do_count > count)
1735 do_count = count;
1736 }
1737
1738 i = append_to_buffer(b_point, STbp, do_count);
1739 if (i) {
1740 retval = i;
1741 goto out;
1742 }
1743 }
1744 count -= do_count;
1745 b_point += do_count;
1746
1747 async_write = STp->block_size == 0 && !STbp->do_dio &&
1748 STm->do_async_writes && STps->eof < ST_EOM_OK;
1749
1750 if (STp->block_size != 0 && STm->do_buffer_writes &&
1751 !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK &&
1752 STbp->buffer_bytes < STbp->buffer_size) {
1753 STp->dirty = 1;
1754 /* Don't write a buffer that is not full enough. */
1755 if (!async_write && count == 0)
1756 break;
1757 }
1758
1759 retry_write:
1760 if (STp->block_size == 0)
1761 blks = transfer = do_count;
1762 else {
1763 if (!STbp->do_dio)
1764 blks = STbp->buffer_bytes;
1765 else
1766 blks = do_count;
1767 blks /= STp->block_size;
1768 transfer = blks * STp->block_size;
1769 }
1770 cmd[2] = blks >> 16;
1771 cmd[3] = blks >> 8;
1772 cmd[4] = blks;
1773
1774 SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
1775 STp->device->request_queue->rq_timeout,
1776 MAX_WRITE_RETRIES, !async_write);
1777 if (!SRpnt) {
1778 retval = STbp->syscall_result;
1779 goto out;
1780 }
1781 if (async_write && !STbp->syscall_result) {
1782 STbp->writing = transfer;
1783 STp->dirty = !(STbp->writing ==
1784 STbp->buffer_bytes);
1785 SRpnt = NULL; /* Prevent releasing this request! */
1786 DEB( STp->write_pending = 1; )
1787 break;
1788 }
1789
1790 if (STbp->syscall_result != 0) {
1791 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1792
1793 DEBC_printk(STp, "Error on write:\n");
1794 if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) {
1795 scode = cmdstatp->sense_hdr.sense_key;
1796 if (cmdstatp->remainder_valid)
1797 undone = (int)cmdstatp->uremainder64;
1798 else if (STp->block_size == 0 &&
1799 scode == VOLUME_OVERFLOW)
1800 undone = transfer;
1801 else
1802 undone = 0;
1803 if (STp->block_size != 0)
1804 undone *= STp->block_size;
1805 if (undone <= do_count) {
1806 /* Only data from this write is not written */
1807 count += undone;
1808 b_point -= undone;
1809 do_count -= undone;
1810 if (STp->block_size)
1811 blks = (transfer - undone) / STp->block_size;
1812 STps->eof = ST_EOM_OK;
1813 /* Continue in fixed block mode if all written
1814 in this request but still something left to write
1815 (retval left to zero)
1816 */
1817 if (STp->block_size == 0 ||
1818 undone > 0 || count == 0)
1819 retval = (-ENOSPC); /* EOM within current request */
1820 DEBC_printk(STp, "EOM with %d "
1821 "bytes unwritten.\n",
1822 (int)count);
1823 } else {
1824 /* EOT within data buffered earlier (possible only
1825 in fixed block mode without direct i/o) */
1826 if (!retry_eot && !cmdstatp->deferred &&
1827 (scode == NO_SENSE || scode == RECOVERED_ERROR)) {
1828 move_buffer_data(STp->buffer, transfer - undone);
1829 retry_eot = 1;
1830 if (STps->drv_block >= 0) {
1831 STps->drv_block += (transfer - undone) /
1832 STp->block_size;
1833 }
1834 STps->eof = ST_EOM_OK;
1835 DEBC_printk(STp, "Retry "
1836 "write of %d "
1837 "bytes at EOM.\n",
1838 STp->buffer->buffer_bytes);
1839 goto retry_write;
1840 }
1841 else {
1842 /* Either error within data buffered by driver or
1843 failed retry */
1844 count -= do_count;
1845 blks = do_count = 0;
1846 STps->eof = ST_EOM_ERROR;
1847 STps->drv_block = (-1); /* Too cautious? */
1848 retval = (-EIO); /* EOM for old data */
1849 DEBC_printk(STp, "EOM with "
1850 "lost data.\n");
1851 }
1852 }
1853 } else {
1854 count += do_count;
1855 STps->drv_block = (-1); /* Too cautious? */
1856 retval = STbp->syscall_result;
1857 }
1858
1859 }
1860
1861 if (STps->drv_block >= 0) {
1862 if (STp->block_size == 0)
1863 STps->drv_block += (do_count > 0);
1864 else
1865 STps->drv_block += blks;
1866 }
1867
1868 STbp->buffer_bytes = 0;
1869 STp->dirty = 0;
1870
1871 if (retval || retry_eot) {
1872 if (count < total)
1873 retval = total - count;
1874 goto out;
1875 }
1876 }
1877
1878 if (STps->eof == ST_EOD_1)
1879 STps->eof = ST_EOM_OK;
1880 else if (STps->eof != ST_EOM_OK)
1881 STps->eof = ST_NOEOF;
1882 retval = total - count;
1883
1884 out:
1885 if (SRpnt != NULL)
1886 st_release_request(SRpnt);
1887 release_buffering(STp, 0);
1888 mutex_unlock(&STp->lock);
1889
1890 return retval;
1891}
1892
1893/* Read data from the tape. Returns zero in the normal case, one if the
1894 eof status has changed, and the negative error code in case of a
1895 fatal error. Otherwise updates the buffer and the eof state.
1896
1897 Does release user buffer mapping if it is set.
1898*/
1899static long read_tape(struct scsi_tape *STp, long count,
1900 struct st_request ** aSRpnt)
1901{
1902 int transfer, blks, bytes;
1903 unsigned char cmd[MAX_COMMAND_SIZE];
1904 struct st_request *SRpnt;
1905 struct st_modedef *STm;
1906 struct st_partstat *STps;
1907 struct st_buffer *STbp;
1908 int retval = 0;
1909
1910 if (count == 0)
1911 return 0;
1912
1913 STm = &(STp->modes[STp->current_mode]);
1914 STps = &(STp->ps[STp->partition]);
1915 if (STps->eof == ST_FM_HIT)
1916 return 1;
1917 STbp = STp->buffer;
1918
1919 if (STp->block_size == 0)
1920 blks = bytes = count;
1921 else {
1922 if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) {
1923 blks = (STp->buffer)->buffer_blocks;
1924 bytes = blks * STp->block_size;
1925 } else {
1926 bytes = count;
1927 if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size)
1928 bytes = (STp->buffer)->buffer_size;
1929 blks = bytes / STp->block_size;
1930 bytes = blks * STp->block_size;
1931 }
1932 }
1933
1934 memset(cmd, 0, MAX_COMMAND_SIZE);
1935 cmd[0] = READ_6;
1936 cmd[1] = (STp->block_size != 0);
1937 if (!cmd[1] && STp->sili)
1938 cmd[1] |= 2;
1939 cmd[2] = blks >> 16;
1940 cmd[3] = blks >> 8;
1941 cmd[4] = blks;
1942
1943 SRpnt = *aSRpnt;
1944 SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE,
1945 STp->device->request_queue->rq_timeout,
1946 MAX_RETRIES, 1);
1947 release_buffering(STp, 1);
1948 *aSRpnt = SRpnt;
1949 if (!SRpnt)
1950 return STbp->syscall_result;
1951
1952 STbp->read_pointer = 0;
1953 STps->at_sm = 0;
1954
1955 /* Something to check */
1956 if (STbp->syscall_result) {
1957 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1958
1959 retval = 1;
1960 DEBC_printk(STp,
1961 "Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1962 SRpnt->sense[0], SRpnt->sense[1],
1963 SRpnt->sense[2], SRpnt->sense[3],
1964 SRpnt->sense[4], SRpnt->sense[5],
1965 SRpnt->sense[6], SRpnt->sense[7]);
1966 if (cmdstatp->have_sense) {
1967
1968 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
1969 cmdstatp->flags &= 0xcf; /* No need for EOM in this case */
1970
1971 if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */
1972 /* Compute the residual count */
1973 if (cmdstatp->remainder_valid)
1974 transfer = (int)cmdstatp->uremainder64;
1975 else
1976 transfer = 0;
1977 if (STp->block_size == 0 &&
1978 cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR)
1979 transfer = bytes;
1980
1981 if (cmdstatp->flags & SENSE_ILI) { /* ILI */
1982 if (STp->block_size == 0 &&
1983 transfer < 0) {
1984 st_printk(KERN_NOTICE, STp,
1985 "Failed to read %d "
1986 "byte block with %d "
1987 "byte transfer.\n",
1988 bytes - transfer,
1989 bytes);
1990 if (STps->drv_block >= 0)
1991 STps->drv_block += 1;
1992 STbp->buffer_bytes = 0;
1993 return (-ENOMEM);
1994 } else if (STp->block_size == 0) {
1995 STbp->buffer_bytes = bytes - transfer;
1996 } else {
1997 st_release_request(SRpnt);
1998 SRpnt = *aSRpnt = NULL;
1999 if (transfer == blks) { /* We did not get anything, error */
2000 st_printk(KERN_NOTICE, STp,
2001 "Incorrect "
2002 "block size.\n");
2003 if (STps->drv_block >= 0)
2004 STps->drv_block += blks - transfer + 1;
2005 st_int_ioctl(STp, MTBSR, 1);
2006 return (-EIO);
2007 }
2008 /* We have some data, deliver it */
2009 STbp->buffer_bytes = (blks - transfer) *
2010 STp->block_size;
2011 DEBC_printk(STp, "ILI but "
2012 "enough data "
2013 "received %ld "
2014 "%d.\n", count,
2015 STbp->buffer_bytes);
2016 if (STps->drv_block >= 0)
2017 STps->drv_block += 1;
2018 if (st_int_ioctl(STp, MTBSR, 1))
2019 return (-EIO);
2020 }
2021 } else if (cmdstatp->flags & SENSE_FMK) { /* FM overrides EOM */
2022 if (STps->eof != ST_FM_HIT)
2023 STps->eof = ST_FM_HIT;
2024 else
2025 STps->eof = ST_EOD_2;
2026 if (STp->block_size == 0)
2027 STbp->buffer_bytes = 0;
2028 else
2029 STbp->buffer_bytes =
2030 bytes - transfer * STp->block_size;
2031 DEBC_printk(STp, "EOF detected (%d "
2032 "bytes read).\n",
2033 STbp->buffer_bytes);
2034 } else if (cmdstatp->flags & SENSE_EOM) {
2035 if (STps->eof == ST_FM)
2036 STps->eof = ST_EOD_1;
2037 else
2038 STps->eof = ST_EOM_OK;
2039 if (STp->block_size == 0)
2040 STbp->buffer_bytes = bytes - transfer;
2041 else
2042 STbp->buffer_bytes =
2043 bytes - transfer * STp->block_size;
2044
2045 DEBC_printk(STp, "EOM detected (%d "
2046 "bytes read).\n",
2047 STbp->buffer_bytes);
2048 }
2049 }
2050 /* end of EOF, EOM, ILI test */
2051 else { /* nonzero sense key */
2052 DEBC_printk(STp, "Tape error while reading.\n");
2053 STps->drv_block = (-1);
2054 if (STps->eof == ST_FM &&
2055 cmdstatp->sense_hdr.sense_key == BLANK_CHECK) {
2056 DEBC_printk(STp, "Zero returned for "
2057 "first BLANK CHECK "
2058 "after EOF.\n");
2059 STps->eof = ST_EOD_2; /* First BLANK_CHECK after FM */
2060 } else /* Some other extended sense code */
2061 retval = (-EIO);
2062 }
2063
2064 if (STbp->buffer_bytes < 0) /* Caused by bogus sense data */
2065 STbp->buffer_bytes = 0;
2066 }
2067 /* End of extended sense test */
2068 else { /* Non-extended sense */
2069 retval = STbp->syscall_result;
2070 }
2071
2072 }
2073 /* End of error handling */
2074 else { /* Read successful */
2075 STbp->buffer_bytes = bytes;
2076 if (STp->sili) /* In fixed block mode residual is always zero here */
2077 STbp->buffer_bytes -= STp->buffer->cmdstat.residual;
2078 }
2079
2080 if (STps->drv_block >= 0) {
2081 if (STp->block_size == 0)
2082 STps->drv_block++;
2083 else
2084 STps->drv_block += STbp->buffer_bytes / STp->block_size;
2085 }
2086 return retval;
2087}
2088
2089
2090/* Read command */
2091static ssize_t
2092st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
2093{
2094 ssize_t total;
2095 ssize_t retval = 0;
2096 ssize_t i, transfer;
2097 int special, do_dio = 0;
2098 struct st_request *SRpnt = NULL;
2099 struct scsi_tape *STp = filp->private_data;
2100 struct st_modedef *STm;
2101 struct st_partstat *STps;
2102 struct st_buffer *STbp = STp->buffer;
2103
2104 if (mutex_lock_interruptible(&STp->lock))
2105 return -ERESTARTSYS;
2106
2107 retval = rw_checks(STp, filp, count);
2108 if (retval || count == 0)
2109 goto out;
2110
2111 STm = &(STp->modes[STp->current_mode]);
2112 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
2113 if (!STm->do_read_ahead) {
2114 retval = (-EINVAL); /* Read must be integral number of blocks */
2115 goto out;
2116 }
2117 STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */
2118 }
2119
2120 STps = &(STp->ps[STp->partition]);
2121 if (STps->rw == ST_WRITING) {
2122 retval = flush_buffer(STp, 0);
2123 if (retval)
2124 goto out;
2125 STps->rw = ST_READING;
2126 }
2127 DEB(
2128 if (debugging && STps->eof != ST_NOEOF)
2129 st_printk(ST_DEB_MSG, STp,
2130 "EOF/EOM flag up (%d). Bytes %d\n",
2131 STps->eof, STbp->buffer_bytes);
2132 ) /* end DEB */
2133
2134 retval = setup_buffering(STp, buf, count, 1);
2135 if (retval)
2136 goto out;
2137 do_dio = STbp->do_dio;
2138
2139 if (STbp->buffer_bytes == 0 &&
2140 STps->eof >= ST_EOD_1) {
2141 if (STps->eof < ST_EOD) {
2142 STps->eof += 1;
2143 retval = 0;
2144 goto out;
2145 }
2146 retval = (-EIO); /* EOM or Blank Check */
2147 goto out;
2148 }
2149
2150 if (do_dio) {
2151 /* Check the buffer writability before any tape movement. Don't alter
2152 buffer data. */
2153 if (copy_from_user(&i, buf, 1) != 0 ||
2154 copy_to_user(buf, &i, 1) != 0 ||
2155 copy_from_user(&i, buf + count - 1, 1) != 0 ||
2156 copy_to_user(buf + count - 1, &i, 1) != 0) {
2157 retval = (-EFAULT);
2158 goto out;
2159 }
2160 }
2161
2162 STps->rw = ST_READING;
2163
2164
2165 /* Loop until enough data in buffer or a special condition found */
2166 for (total = 0, special = 0; total < count && !special;) {
2167
2168 /* Get new data if the buffer is empty */
2169 if (STbp->buffer_bytes == 0) {
2170 special = read_tape(STp, count - total, &SRpnt);
2171 if (special < 0) { /* No need to continue read */
2172 retval = special;
2173 goto out;
2174 }
2175 }
2176
2177 /* Move the data from driver buffer to user buffer */
2178 if (STbp->buffer_bytes > 0) {
2179 DEB(
2180 if (debugging && STps->eof != ST_NOEOF)
2181 st_printk(ST_DEB_MSG, STp,
2182 "EOF up (%d). Left %d, needed %d.\n",
2183 STps->eof, STbp->buffer_bytes,
2184 (int)(count - total));
2185 ) /* end DEB */
2186 transfer = STbp->buffer_bytes < count - total ?
2187 STbp->buffer_bytes : count - total;
2188 if (!do_dio) {
2189 i = from_buffer(STbp, buf, transfer);
2190 if (i) {
2191 retval = i;
2192 goto out;
2193 }
2194 }
2195 buf += transfer;
2196 total += transfer;
2197 }
2198
2199 if (STp->block_size == 0)
2200 break; /* Read only one variable length block */
2201
2202 } /* for (total = 0, special = 0;
2203 total < count && !special; ) */
2204
2205 /* Change the eof state if no data from tape or buffer */
2206 if (total == 0) {
2207 if (STps->eof == ST_FM_HIT) {
2208 STps->eof = ST_FM;
2209 STps->drv_block = 0;
2210 if (STps->drv_file >= 0)
2211 STps->drv_file++;
2212 } else if (STps->eof == ST_EOD_1) {
2213 STps->eof = ST_EOD_2;
2214 STps->drv_block = 0;
2215 if (STps->drv_file >= 0)
2216 STps->drv_file++;
2217 } else if (STps->eof == ST_EOD_2)
2218 STps->eof = ST_EOD;
2219 } else if (STps->eof == ST_FM)
2220 STps->eof = ST_NOEOF;
2221 retval = total;
2222
2223 out:
2224 if (SRpnt != NULL) {
2225 st_release_request(SRpnt);
2226 SRpnt = NULL;
2227 }
2228 if (do_dio) {
2229 release_buffering(STp, 1);
2230 STbp->buffer_bytes = 0;
2231 }
2232 mutex_unlock(&STp->lock);
2233
2234 return retval;
2235}
2236
2237
2238
2239DEB(
2240/* Set the driver options */
2241static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm)
2242{
2243 if (debugging) {
2244 st_printk(KERN_INFO, STp,
2245 "Mode %d options: buffer writes: %d, "
2246 "async writes: %d, read ahead: %d\n",
2247 STp->current_mode, STm->do_buffer_writes,
2248 STm->do_async_writes, STm->do_read_ahead);
2249 st_printk(KERN_INFO, STp,
2250 " can bsr: %d, two FMs: %d, "
2251 "fast mteom: %d, auto lock: %d,\n",
2252 STp->can_bsr, STp->two_fm, STp->fast_mteom,
2253 STp->do_auto_lock);
2254 st_printk(KERN_INFO, STp,
2255 " defs for wr: %d, no block limits: %d, "
2256 "partitions: %d, s2 log: %d\n",
2257 STm->defaults_for_writes, STp->omit_blklims,
2258 STp->can_partitions, STp->scsi2_logical);
2259 st_printk(KERN_INFO, STp,
2260 " sysv: %d nowait: %d sili: %d "
2261 "nowait_filemark: %d\n",
2262 STm->sysv, STp->immediate, STp->sili,
2263 STp->immediate_filemark);
2264 st_printk(KERN_INFO, STp, " debugging: %d\n", debugging);
2265 }
2266}
2267 )
2268
2269
2270static int st_set_options(struct scsi_tape *STp, long options)
2271{
2272 int value;
2273 long code;
2274 struct st_modedef *STm;
2275 struct cdev *cd0, *cd1;
2276 struct device *d0, *d1;
2277
2278 STm = &(STp->modes[STp->current_mode]);
2279 if (!STm->defined) {
2280 cd0 = STm->cdevs[0];
2281 cd1 = STm->cdevs[1];
2282 d0 = STm->devs[0];
2283 d1 = STm->devs[1];
2284 memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef));
2285 STm->cdevs[0] = cd0;
2286 STm->cdevs[1] = cd1;
2287 STm->devs[0] = d0;
2288 STm->devs[1] = d1;
2289 modes_defined = 1;
2290 DEBC_printk(STp, "Initialized mode %d definition from mode 0\n",
2291 STp->current_mode);
2292 }
2293
2294 code = options & MT_ST_OPTIONS;
2295 if (code == MT_ST_BOOLEANS) {
2296 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
2297 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
2298 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
2299 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
2300 STp->two_fm = (options & MT_ST_TWO_FM) != 0;
2301 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
2302 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
2303 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
2304 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
2305 if ((STp->device)->scsi_level >= SCSI_2)
2306 STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
2307 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
2308 STp->immediate = (options & MT_ST_NOWAIT) != 0;
2309 STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0;
2310 STm->sysv = (options & MT_ST_SYSV) != 0;
2311 STp->sili = (options & MT_ST_SILI) != 0;
2312 DEB( debugging = (options & MT_ST_DEBUGGING) != 0;
2313 st_log_options(STp, STm); )
2314 } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
2315 value = (code == MT_ST_SETBOOLEANS);
2316 if ((options & MT_ST_BUFFER_WRITES) != 0)
2317 STm->do_buffer_writes = value;
2318 if ((options & MT_ST_ASYNC_WRITES) != 0)
2319 STm->do_async_writes = value;
2320 if ((options & MT_ST_DEF_WRITES) != 0)
2321 STm->defaults_for_writes = value;
2322 if ((options & MT_ST_READ_AHEAD) != 0)
2323 STm->do_read_ahead = value;
2324 if ((options & MT_ST_TWO_FM) != 0)
2325 STp->two_fm = value;
2326 if ((options & MT_ST_FAST_MTEOM) != 0)
2327 STp->fast_mteom = value;
2328 if ((options & MT_ST_AUTO_LOCK) != 0)
2329 STp->do_auto_lock = value;
2330 if ((options & MT_ST_CAN_BSR) != 0)
2331 STp->can_bsr = value;
2332 if ((options & MT_ST_NO_BLKLIMS) != 0)
2333 STp->omit_blklims = value;
2334 if ((STp->device)->scsi_level >= SCSI_2 &&
2335 (options & MT_ST_CAN_PARTITIONS) != 0)
2336 STp->can_partitions = value;
2337 if ((options & MT_ST_SCSI2LOGICAL) != 0)
2338 STp->scsi2_logical = value;
2339 if ((options & MT_ST_NOWAIT) != 0)
2340 STp->immediate = value;
2341 if ((options & MT_ST_NOWAIT_EOF) != 0)
2342 STp->immediate_filemark = value;
2343 if ((options & MT_ST_SYSV) != 0)
2344 STm->sysv = value;
2345 if ((options & MT_ST_SILI) != 0)
2346 STp->sili = value;
2347 DEB(
2348 if ((options & MT_ST_DEBUGGING) != 0)
2349 debugging = value;
2350 st_log_options(STp, STm); )
2351 } else if (code == MT_ST_WRITE_THRESHOLD) {
2352 /* Retained for compatibility */
2353 } else if (code == MT_ST_DEF_BLKSIZE) {
2354 value = (options & ~MT_ST_OPTIONS);
2355 if (value == ~MT_ST_OPTIONS) {
2356 STm->default_blksize = (-1);
2357 DEBC_printk(STp, "Default block size disabled.\n");
2358 } else {
2359 STm->default_blksize = value;
2360 DEBC_printk(STp,"Default block size set to "
2361 "%d bytes.\n", STm->default_blksize);
2362 if (STp->ready == ST_READY) {
2363 STp->blksize_changed = 0;
2364 set_mode_densblk(STp, STm);
2365 }
2366 }
2367 } else if (code == MT_ST_TIMEOUTS) {
2368 value = (options & ~MT_ST_OPTIONS);
2369 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
2370 STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
2371 DEBC_printk(STp, "Long timeout set to %d seconds.\n",
2372 (value & ~MT_ST_SET_LONG_TIMEOUT));
2373 } else {
2374 blk_queue_rq_timeout(STp->device->request_queue,
2375 value * HZ);
2376 DEBC_printk(STp, "Normal timeout set to %d seconds.\n",
2377 value);
2378 }
2379 } else if (code == MT_ST_SET_CLN) {
2380 value = (options & ~MT_ST_OPTIONS) & 0xff;
2381 if (value != 0 &&
2382 (value < EXTENDED_SENSE_START ||
2383 value >= SCSI_SENSE_BUFFERSIZE))
2384 return (-EINVAL);
2385 STp->cln_mode = value;
2386 STp->cln_sense_mask = (options >> 8) & 0xff;
2387 STp->cln_sense_value = (options >> 16) & 0xff;
2388 st_printk(KERN_INFO, STp,
2389 "Cleaning request mode %d, mask %02x, value %02x\n",
2390 value, STp->cln_sense_mask, STp->cln_sense_value);
2391 } else if (code == MT_ST_DEF_OPTIONS) {
2392 code = (options & ~MT_ST_CLEAR_DEFAULT);
2393 value = (options & MT_ST_CLEAR_DEFAULT);
2394 if (code == MT_ST_DEF_DENSITY) {
2395 if (value == MT_ST_CLEAR_DEFAULT) {
2396 STm->default_density = (-1);
2397 DEBC_printk(STp,
2398 "Density default disabled.\n");
2399 } else {
2400 STm->default_density = value & 0xff;
2401 DEBC_printk(STp, "Density default set to %x\n",
2402 STm->default_density);
2403 if (STp->ready == ST_READY) {
2404 STp->density_changed = 0;
2405 set_mode_densblk(STp, STm);
2406 }
2407 }
2408 } else if (code == MT_ST_DEF_DRVBUFFER) {
2409 if (value == MT_ST_CLEAR_DEFAULT) {
2410 STp->default_drvbuffer = 0xff;
2411 DEBC_printk(STp,
2412 "Drive buffer default disabled.\n");
2413 } else {
2414 STp->default_drvbuffer = value & 7;
2415 DEBC_printk(STp,
2416 "Drive buffer default set to %x\n",
2417 STp->default_drvbuffer);
2418 if (STp->ready == ST_READY)
2419 st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer);
2420 }
2421 } else if (code == MT_ST_DEF_COMPRESSION) {
2422 if (value == MT_ST_CLEAR_DEFAULT) {
2423 STm->default_compression = ST_DONT_TOUCH;
2424 DEBC_printk(STp,
2425 "Compression default disabled.\n");
2426 } else {
2427 if ((value & 0xff00) != 0) {
2428 STp->c_algo = (value & 0xff00) >> 8;
2429 DEBC_printk(STp, "Compression "
2430 "algorithm set to 0x%x.\n",
2431 STp->c_algo);
2432 }
2433 if ((value & 0xff) != 0xff) {
2434 STm->default_compression = (value & 1 ? ST_YES : ST_NO);
2435 DEBC_printk(STp, "Compression default "
2436 "set to %x\n",
2437 (value & 1));
2438 if (STp->ready == ST_READY) {
2439 STp->compression_changed = 0;
2440 st_compression(STp, (STm->default_compression == ST_YES));
2441 }
2442 }
2443 }
2444 }
2445 } else
2446 return (-EIO);
2447
2448 return 0;
2449}
2450
2451#define MODE_HEADER_LENGTH 4
2452
2453/* Mode header and page byte offsets */
2454#define MH_OFF_DATA_LENGTH 0
2455#define MH_OFF_MEDIUM_TYPE 1
2456#define MH_OFF_DEV_SPECIFIC 2
2457#define MH_OFF_BDESCS_LENGTH 3
2458#define MP_OFF_PAGE_NBR 0
2459#define MP_OFF_PAGE_LENGTH 1
2460
2461/* Mode header and page bit masks */
2462#define MH_BIT_WP 0x80
2463#define MP_MSK_PAGE_NBR 0x3f
2464
2465/* Don't return block descriptors */
2466#define MODE_SENSE_OMIT_BDESCS 0x08
2467
2468#define MODE_SELECT_PAGE_FORMAT 0x10
2469
2470/* Read a mode page into the tape buffer. The block descriptors are included
2471 if incl_block_descs is true. The page control is ored to the page number
2472 parameter, if necessary. */
2473static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs)
2474{
2475 unsigned char cmd[MAX_COMMAND_SIZE];
2476 struct st_request *SRpnt;
2477
2478 memset(cmd, 0, MAX_COMMAND_SIZE);
2479 cmd[0] = MODE_SENSE;
2480 if (omit_block_descs)
2481 cmd[1] = MODE_SENSE_OMIT_BDESCS;
2482 cmd[2] = page;
2483 cmd[4] = 255;
2484
2485 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_FROM_DEVICE,
2486 STp->device->request_queue->rq_timeout, 0, 1);
2487 if (SRpnt == NULL)
2488 return (STp->buffer)->syscall_result;
2489
2490 st_release_request(SRpnt);
2491
2492 return STp->buffer->syscall_result;
2493}
2494
2495
2496/* Send the mode page in the tape buffer to the drive. Assumes that the mode data
2497 in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */
2498static int write_mode_page(struct scsi_tape *STp, int page, int slow)
2499{
2500 int pgo;
2501 unsigned char cmd[MAX_COMMAND_SIZE];
2502 struct st_request *SRpnt;
2503 int timeout;
2504
2505 memset(cmd, 0, MAX_COMMAND_SIZE);
2506 cmd[0] = MODE_SELECT;
2507 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2508 pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH];
2509 cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2;
2510
2511 /* Clear reserved fields */
2512 (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0;
2513 (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0;
2514 (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP;
2515 (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR;
2516
2517 timeout = slow ?
2518 STp->long_timeout : STp->device->request_queue->rq_timeout;
2519 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_TO_DEVICE,
2520 timeout, 0, 1);
2521 if (SRpnt == NULL)
2522 return (STp->buffer)->syscall_result;
2523
2524 st_release_request(SRpnt);
2525
2526 return STp->buffer->syscall_result;
2527}
2528
2529
2530#define COMPRESSION_PAGE 0x0f
2531#define COMPRESSION_PAGE_LENGTH 16
2532
2533#define CP_OFF_DCE_DCC 2
2534#define CP_OFF_C_ALGO 7
2535
2536#define DCE_MASK 0x80
2537#define DCC_MASK 0x40
2538#define RED_MASK 0x60
2539
2540
2541/* Control the compression with mode page 15. Algorithm not changed if zero.
2542
2543 The block descriptors are read and written because Sony SDT-7000 does not
2544 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
2545 Including block descriptors should not cause any harm to other drives. */
2546
2547static int st_compression(struct scsi_tape * STp, int state)
2548{
2549 int retval;
2550 int mpoffs; /* Offset to mode page start */
2551 unsigned char *b_data = (STp->buffer)->b_data;
2552
2553 if (STp->ready != ST_READY)
2554 return (-EIO);
2555
2556 /* Read the current page contents */
2557 retval = read_mode_page(STp, COMPRESSION_PAGE, 0);
2558 if (retval) {
2559 DEBC_printk(STp, "Compression mode page not supported.\n");
2560 return (-EIO);
2561 }
2562
2563 mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH];
2564 DEBC_printk(STp, "Compression state is %d.\n",
2565 (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0));
2566
2567 /* Check if compression can be changed */
2568 if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) {
2569 DEBC_printk(STp, "Compression not supported.\n");
2570 return (-EIO);
2571 }
2572
2573 /* Do the change */
2574 if (state) {
2575 b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK;
2576 if (STp->c_algo != 0)
2577 b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo;
2578 }
2579 else {
2580 b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK;
2581 if (STp->c_algo != 0)
2582 b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */
2583 }
2584
2585 retval = write_mode_page(STp, COMPRESSION_PAGE, 0);
2586 if (retval) {
2587 DEBC_printk(STp, "Compression change failed.\n");
2588 return (-EIO);
2589 }
2590 DEBC_printk(STp, "Compression state changed to %d.\n", state);
2591
2592 STp->compression_changed = 1;
2593 return 0;
2594}
2595
2596
2597/* Process the load and unload commands (does unload if the load code is zero) */
2598static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code)
2599{
2600 int retval = (-EIO), timeout;
2601 unsigned char cmd[MAX_COMMAND_SIZE];
2602 struct st_partstat *STps;
2603 struct st_request *SRpnt;
2604
2605 if (STp->ready != ST_READY && !load_code) {
2606 if (STp->ready == ST_NO_TAPE)
2607 return (-ENOMEDIUM);
2608 else
2609 return (-EIO);
2610 }
2611
2612 memset(cmd, 0, MAX_COMMAND_SIZE);
2613 cmd[0] = START_STOP;
2614 if (load_code)
2615 cmd[4] |= 1;
2616 /*
2617 * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A
2618 */
2619 if (load_code >= 1 + MT_ST_HPLOADER_OFFSET
2620 && load_code <= 6 + MT_ST_HPLOADER_OFFSET) {
2621 DEBC_printk(STp, " Enhanced %sload slot %2d.\n",
2622 (cmd[4]) ? "" : "un",
2623 load_code - MT_ST_HPLOADER_OFFSET);
2624 cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */
2625 }
2626 if (STp->immediate) {
2627 cmd[1] = 1; /* Don't wait for completion */
2628 timeout = STp->device->request_queue->rq_timeout;
2629 }
2630 else
2631 timeout = STp->long_timeout;
2632
2633 DEBC(
2634 if (!load_code)
2635 st_printk(ST_DEB_MSG, STp, "Unloading tape.\n");
2636 else
2637 st_printk(ST_DEB_MSG, STp, "Loading tape.\n");
2638 );
2639
2640 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
2641 timeout, MAX_RETRIES, 1);
2642 if (!SRpnt)
2643 return (STp->buffer)->syscall_result;
2644
2645 retval = (STp->buffer)->syscall_result;
2646 st_release_request(SRpnt);
2647
2648 if (!retval) { /* SCSI command successful */
2649
2650 if (!load_code) {
2651 STp->rew_at_close = 0;
2652 STp->ready = ST_NO_TAPE;
2653 }
2654 else {
2655 STp->rew_at_close = STp->autorew_dev;
2656 retval = check_tape(STp, filp);
2657 if (retval > 0)
2658 retval = 0;
2659 }
2660 }
2661 else {
2662 STps = &(STp->ps[STp->partition]);
2663 STps->drv_file = STps->drv_block = (-1);
2664 }
2665
2666 return retval;
2667}
2668
2669#if DEBUG
2670#define ST_DEB_FORWARD 0
2671#define ST_DEB_BACKWARD 1
2672static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd)
2673{
2674 s32 sc;
2675
2676 if (!debugging)
2677 return;
2678
2679 sc = cmd[2] & 0x80 ? 0xff000000 : 0;
2680 sc |= (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
2681 if (direction)
2682 sc = -sc;
2683 st_printk(ST_DEB_MSG, STp, "Spacing tape %s over %d %s.\n",
2684 direction ? "backward" : "forward", sc, units);
2685}
2686#else
2687#define ST_DEB_FORWARD 0
2688#define ST_DEB_BACKWARD 1
2689static void deb_space_print(struct scsi_tape *STp, int direction, char *units, unsigned char *cmd) {}
2690#endif
2691
2692
2693/* Internal ioctl function */
2694static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg)
2695{
2696 int timeout;
2697 long ltmp;
2698 int ioctl_result;
2699 int chg_eof = 1;
2700 unsigned char cmd[MAX_COMMAND_SIZE];
2701 struct st_request *SRpnt;
2702 struct st_partstat *STps;
2703 int fileno, blkno, at_sm, undone;
2704 int datalen = 0, direction = DMA_NONE;
2705
2706 WARN_ON(STp->buffer->do_dio != 0);
2707 if (STp->ready != ST_READY) {
2708 if (STp->ready == ST_NO_TAPE)
2709 return (-ENOMEDIUM);
2710 else
2711 return (-EIO);
2712 }
2713 timeout = STp->long_timeout;
2714 STps = &(STp->ps[STp->partition]);
2715 fileno = STps->drv_file;
2716 blkno = STps->drv_block;
2717 at_sm = STps->at_sm;
2718
2719 memset(cmd, 0, MAX_COMMAND_SIZE);
2720 switch (cmd_in) {
2721 case MTFSFM:
2722 chg_eof = 0; /* Changed from the FSF after this */
2723 case MTFSF:
2724 cmd[0] = SPACE;
2725 cmd[1] = 0x01; /* Space FileMarks */
2726 cmd[2] = (arg >> 16);
2727 cmd[3] = (arg >> 8);
2728 cmd[4] = arg;
2729 deb_space_print(STp, ST_DEB_FORWARD, "filemarks", cmd);
2730 if (fileno >= 0)
2731 fileno += arg;
2732 blkno = 0;
2733 at_sm &= (arg == 0);
2734 break;
2735 case MTBSFM:
2736 chg_eof = 0; /* Changed from the FSF after this */
2737 case MTBSF:
2738 cmd[0] = SPACE;
2739 cmd[1] = 0x01; /* Space FileMarks */
2740 ltmp = (-arg);
2741 cmd[2] = (ltmp >> 16);
2742 cmd[3] = (ltmp >> 8);
2743 cmd[4] = ltmp;
2744 deb_space_print(STp, ST_DEB_BACKWARD, "filemarks", cmd);
2745 if (fileno >= 0)
2746 fileno -= arg;
2747 blkno = (-1); /* We can't know the block number */
2748 at_sm &= (arg == 0);
2749 break;
2750 case MTFSR:
2751 cmd[0] = SPACE;
2752 cmd[1] = 0x00; /* Space Blocks */
2753 cmd[2] = (arg >> 16);
2754 cmd[3] = (arg >> 8);
2755 cmd[4] = arg;
2756 deb_space_print(STp, ST_DEB_FORWARD, "blocks", cmd);
2757 if (blkno >= 0)
2758 blkno += arg;
2759 at_sm &= (arg == 0);
2760 break;
2761 case MTBSR:
2762 cmd[0] = SPACE;
2763 cmd[1] = 0x00; /* Space Blocks */
2764 ltmp = (-arg);
2765 cmd[2] = (ltmp >> 16);
2766 cmd[3] = (ltmp >> 8);
2767 cmd[4] = ltmp;
2768 deb_space_print(STp, ST_DEB_BACKWARD, "blocks", cmd);
2769 if (blkno >= 0)
2770 blkno -= arg;
2771 at_sm &= (arg == 0);
2772 break;
2773 case MTFSS:
2774 cmd[0] = SPACE;
2775 cmd[1] = 0x04; /* Space Setmarks */
2776 cmd[2] = (arg >> 16);
2777 cmd[3] = (arg >> 8);
2778 cmd[4] = arg;
2779 deb_space_print(STp, ST_DEB_FORWARD, "setmarks", cmd);
2780 if (arg != 0) {
2781 blkno = fileno = (-1);
2782 at_sm = 1;
2783 }
2784 break;
2785 case MTBSS:
2786 cmd[0] = SPACE;
2787 cmd[1] = 0x04; /* Space Setmarks */
2788 ltmp = (-arg);
2789 cmd[2] = (ltmp >> 16);
2790 cmd[3] = (ltmp >> 8);
2791 cmd[4] = ltmp;
2792 deb_space_print(STp, ST_DEB_BACKWARD, "setmarks", cmd);
2793 if (arg != 0) {
2794 blkno = fileno = (-1);
2795 at_sm = 1;
2796 }
2797 break;
2798 case MTWEOF:
2799 case MTWEOFI:
2800 case MTWSM:
2801 if (STp->write_prot)
2802 return (-EACCES);
2803 cmd[0] = WRITE_FILEMARKS;
2804 if (cmd_in == MTWSM)
2805 cmd[1] = 2;
2806 if (cmd_in == MTWEOFI ||
2807 (cmd_in == MTWEOF && STp->immediate_filemark))
2808 cmd[1] |= 1;
2809 cmd[2] = (arg >> 16);
2810 cmd[3] = (arg >> 8);
2811 cmd[4] = arg;
2812 timeout = STp->device->request_queue->rq_timeout;
2813 DEBC(
2814 if (cmd_in != MTWSM)
2815 st_printk(ST_DEB_MSG, STp,
2816 "Writing %d filemarks.\n",
2817 cmd[2] * 65536 +
2818 cmd[3] * 256 +
2819 cmd[4]);
2820 else
2821 st_printk(ST_DEB_MSG, STp,
2822 "Writing %d setmarks.\n",
2823 cmd[2] * 65536 +
2824 cmd[3] * 256 +
2825 cmd[4]);
2826 )
2827 if (fileno >= 0)
2828 fileno += arg;
2829 blkno = 0;
2830 at_sm = (cmd_in == MTWSM);
2831 break;
2832 case MTREW:
2833 cmd[0] = REZERO_UNIT;
2834 if (STp->immediate) {
2835 cmd[1] = 1; /* Don't wait for completion */
2836 timeout = STp->device->request_queue->rq_timeout;
2837 }
2838 DEBC_printk(STp, "Rewinding tape.\n");
2839 fileno = blkno = at_sm = 0;
2840 break;
2841 case MTNOP:
2842 DEBC_printk(STp, "No op on tape.\n");
2843 return 0; /* Should do something ? */
2844 break;
2845 case MTRETEN:
2846 cmd[0] = START_STOP;
2847 if (STp->immediate) {
2848 cmd[1] = 1; /* Don't wait for completion */
2849 timeout = STp->device->request_queue->rq_timeout;
2850 }
2851 cmd[4] = 3;
2852 DEBC_printk(STp, "Retensioning tape.\n");
2853 fileno = blkno = at_sm = 0;
2854 break;
2855 case MTEOM:
2856 if (!STp->fast_mteom) {
2857 /* space to the end of tape */
2858 ioctl_result = st_int_ioctl(STp, MTFSF, 0x7fffff);
2859 fileno = STps->drv_file;
2860 if (STps->eof >= ST_EOD_1)
2861 return 0;
2862 /* The next lines would hide the number of spaced FileMarks
2863 That's why I inserted the previous lines. I had no luck
2864 with detecting EOM with FSF, so we go now to EOM.
2865 Joerg Weule */
2866 } else
2867 fileno = (-1);
2868 cmd[0] = SPACE;
2869 cmd[1] = 3;
2870 DEBC_printk(STp, "Spacing to end of recorded medium.\n");
2871 blkno = -1;
2872 at_sm = 0;
2873 break;
2874 case MTERASE:
2875 if (STp->write_prot)
2876 return (-EACCES);
2877 cmd[0] = ERASE;
2878 cmd[1] = (arg ? 1 : 0); /* Long erase with non-zero argument */
2879 if (STp->immediate) {
2880 cmd[1] |= 2; /* Don't wait for completion */
2881 timeout = STp->device->request_queue->rq_timeout;
2882 }
2883 else
2884 timeout = STp->long_timeout * 8;
2885
2886 DEBC_printk(STp, "Erasing tape.\n");
2887 fileno = blkno = at_sm = 0;
2888 break;
2889 case MTSETBLK: /* Set block length */
2890 case MTSETDENSITY: /* Set tape density */
2891 case MTSETDRVBUFFER: /* Set drive buffering */
2892 case SET_DENS_AND_BLK: /* Set density and block size */
2893 chg_eof = 0;
2894 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
2895 return (-EIO); /* Not allowed if data in buffer */
2896 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
2897 (arg & MT_ST_BLKSIZE_MASK) != 0 &&
2898 STp->max_block > 0 &&
2899 ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block ||
2900 (arg & MT_ST_BLKSIZE_MASK) > STp->max_block)) {
2901 st_printk(KERN_WARNING, STp, "Illegal block size.\n");
2902 return (-EINVAL);
2903 }
2904 cmd[0] = MODE_SELECT;
2905 if ((STp->use_pf & USE_PF))
2906 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2907 cmd[4] = datalen = 12;
2908 direction = DMA_TO_DEVICE;
2909
2910 memset((STp->buffer)->b_data, 0, 12);
2911 if (cmd_in == MTSETDRVBUFFER)
2912 (STp->buffer)->b_data[2] = (arg & 7) << 4;
2913 else
2914 (STp->buffer)->b_data[2] =
2915 STp->drv_buffer << 4;
2916 (STp->buffer)->b_data[3] = 8; /* block descriptor length */
2917 if (cmd_in == MTSETDENSITY) {
2918 (STp->buffer)->b_data[4] = arg;
2919 STp->density_changed = 1; /* At least we tried ;-) */
2920 } else if (cmd_in == SET_DENS_AND_BLK)
2921 (STp->buffer)->b_data[4] = arg >> 24;
2922 else
2923 (STp->buffer)->b_data[4] = STp->density;
2924 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2925 ltmp = arg & MT_ST_BLKSIZE_MASK;
2926 if (cmd_in == MTSETBLK)
2927 STp->blksize_changed = 1; /* At least we tried ;-) */
2928 } else
2929 ltmp = STp->block_size;
2930 (STp->buffer)->b_data[9] = (ltmp >> 16);
2931 (STp->buffer)->b_data[10] = (ltmp >> 8);
2932 (STp->buffer)->b_data[11] = ltmp;
2933 timeout = STp->device->request_queue->rq_timeout;
2934 DEBC(
2935 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK)
2936 st_printk(ST_DEB_MSG, STp,
2937 "Setting block size to %d bytes.\n",
2938 (STp->buffer)->b_data[9] * 65536 +
2939 (STp->buffer)->b_data[10] * 256 +
2940 (STp->buffer)->b_data[11]);
2941 if (cmd_in == MTSETDENSITY || cmd_in == SET_DENS_AND_BLK)
2942 st_printk(ST_DEB_MSG, STp,
2943 "Setting density code to %x.\n",
2944 (STp->buffer)->b_data[4]);
2945 if (cmd_in == MTSETDRVBUFFER)
2946 st_printk(ST_DEB_MSG, STp,
2947 "Setting drive buffer code to %d.\n",
2948 ((STp->buffer)->b_data[2] >> 4) & 7);
2949 )
2950 break;
2951 default:
2952 return (-ENOSYS);
2953 }
2954
2955 SRpnt = st_do_scsi(NULL, STp, cmd, datalen, direction,
2956 timeout, MAX_RETRIES, 1);
2957 if (!SRpnt)
2958 return (STp->buffer)->syscall_result;
2959
2960 ioctl_result = (STp->buffer)->syscall_result;
2961
2962 if (!ioctl_result) { /* SCSI command successful */
2963 st_release_request(SRpnt);
2964 SRpnt = NULL;
2965 STps->drv_block = blkno;
2966 STps->drv_file = fileno;
2967 STps->at_sm = at_sm;
2968
2969 if (cmd_in == MTBSFM)
2970 ioctl_result = st_int_ioctl(STp, MTFSF, 1);
2971 else if (cmd_in == MTFSFM)
2972 ioctl_result = st_int_ioctl(STp, MTBSF, 1);
2973
2974 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2975 STp->block_size = arg & MT_ST_BLKSIZE_MASK;
2976 if (STp->block_size != 0) {
2977 (STp->buffer)->buffer_blocks =
2978 (STp->buffer)->buffer_size / STp->block_size;
2979 }
2980 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
2981 if (cmd_in == SET_DENS_AND_BLK)
2982 STp->density = arg >> MT_ST_DENSITY_SHIFT;
2983 } else if (cmd_in == MTSETDRVBUFFER)
2984 STp->drv_buffer = (arg & 7);
2985 else if (cmd_in == MTSETDENSITY)
2986 STp->density = arg;
2987
2988 if (cmd_in == MTEOM)
2989 STps->eof = ST_EOD;
2990 else if (cmd_in == MTFSF)
2991 STps->eof = ST_FM;
2992 else if (chg_eof)
2993 STps->eof = ST_NOEOF;
2994
2995 if (cmd_in == MTWEOF || cmd_in == MTWEOFI)
2996 STps->rw = ST_IDLE; /* prevent automatic WEOF at close */
2997 } else { /* SCSI command was not completely successful. Don't return
2998 from this block without releasing the SCSI command block! */
2999 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
3000
3001 if (cmdstatp->flags & SENSE_EOM) {
3002 if (cmd_in != MTBSF && cmd_in != MTBSFM &&
3003 cmd_in != MTBSR && cmd_in != MTBSS)
3004 STps->eof = ST_EOM_OK;
3005 STps->drv_block = 0;
3006 }
3007
3008 if (cmdstatp->remainder_valid)
3009 undone = (int)cmdstatp->uremainder64;
3010 else
3011 undone = 0;
3012
3013 if ((cmd_in == MTWEOF || cmd_in == MTWEOFI) &&
3014 cmdstatp->have_sense &&
3015 (cmdstatp->flags & SENSE_EOM)) {
3016 if (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
3017 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) {
3018 ioctl_result = 0; /* EOF(s) written successfully at EOM */
3019 STps->eof = ST_NOEOF;
3020 } else { /* Writing EOF(s) failed */
3021 if (fileno >= 0)
3022 fileno -= undone;
3023 if (undone < arg)
3024 STps->eof = ST_NOEOF;
3025 }
3026 STps->drv_file = fileno;
3027 } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) {
3028 if (fileno >= 0)
3029 STps->drv_file = fileno - undone;
3030 else
3031 STps->drv_file = fileno;
3032 STps->drv_block = -1;
3033 STps->eof = ST_NOEOF;
3034 } else if ((cmd_in == MTBSF) || (cmd_in == MTBSFM)) {
3035 if (arg > 0 && undone < 0) /* Some drives get this wrong */
3036 undone = (-undone);
3037 if (STps->drv_file >= 0)
3038 STps->drv_file = fileno + undone;
3039 STps->drv_block = 0;
3040 STps->eof = ST_NOEOF;
3041 } else if (cmd_in == MTFSR) {
3042 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
3043 if (STps->drv_file >= 0)
3044 STps->drv_file++;
3045 STps->drv_block = 0;
3046 STps->eof = ST_FM;
3047 } else {
3048 if (blkno >= undone)
3049 STps->drv_block = blkno - undone;
3050 else
3051 STps->drv_block = (-1);
3052 STps->eof = ST_NOEOF;
3053 }
3054 } else if (cmd_in == MTBSR) {
3055 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
3056 STps->drv_file--;
3057 STps->drv_block = (-1);
3058 } else {
3059 if (arg > 0 && undone < 0) /* Some drives get this wrong */
3060 undone = (-undone);
3061 if (STps->drv_block >= 0)
3062 STps->drv_block = blkno + undone;
3063 }
3064 STps->eof = ST_NOEOF;
3065 } else if (cmd_in == MTEOM) {
3066 STps->drv_file = (-1);
3067 STps->drv_block = (-1);
3068 STps->eof = ST_EOD;
3069 } else if (cmd_in == MTSETBLK ||
3070 cmd_in == MTSETDENSITY ||
3071 cmd_in == MTSETDRVBUFFER ||
3072 cmd_in == SET_DENS_AND_BLK) {
3073 if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST &&
3074 !(STp->use_pf & PF_TESTED)) {
3075 /* Try the other possible state of Page Format if not
3076 already tried */
3077 STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
3078 st_release_request(SRpnt);
3079 SRpnt = NULL;
3080 return st_int_ioctl(STp, cmd_in, arg);
3081 }
3082 } else if (chg_eof)
3083 STps->eof = ST_NOEOF;
3084
3085 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
3086 STps->eof = ST_EOD;
3087
3088 st_release_request(SRpnt);
3089 SRpnt = NULL;
3090 }
3091
3092 return ioctl_result;
3093}
3094
3095
3096/* Get the tape position. If bt == 2, arg points into a kernel space mt_loc
3097 structure. */
3098
3099static int get_location(struct scsi_tape *STp, unsigned int *block, int *partition,
3100 int logical)
3101{
3102 int result;
3103 unsigned char scmd[MAX_COMMAND_SIZE];
3104 struct st_request *SRpnt;
3105
3106 if (STp->ready != ST_READY)
3107 return (-EIO);
3108
3109 memset(scmd, 0, MAX_COMMAND_SIZE);
3110 if ((STp->device)->scsi_level < SCSI_2) {
3111 scmd[0] = QFA_REQUEST_BLOCK;
3112 scmd[4] = 3;
3113 } else {
3114 scmd[0] = READ_POSITION;
3115 if (!logical && !STp->scsi2_logical)
3116 scmd[1] = 1;
3117 }
3118 SRpnt = st_do_scsi(NULL, STp, scmd, 20, DMA_FROM_DEVICE,
3119 STp->device->request_queue->rq_timeout,
3120 MAX_READY_RETRIES, 1);
3121 if (!SRpnt)
3122 return (STp->buffer)->syscall_result;
3123
3124 if ((STp->buffer)->syscall_result != 0 ||
3125 (STp->device->scsi_level >= SCSI_2 &&
3126 ((STp->buffer)->b_data[0] & 4) != 0)) {
3127 *block = *partition = 0;
3128 DEBC_printk(STp, " Can't read tape position.\n");
3129 result = (-EIO);
3130 } else {
3131 result = 0;
3132 if ((STp->device)->scsi_level < SCSI_2) {
3133 *block = ((STp->buffer)->b_data[0] << 16)
3134 + ((STp->buffer)->b_data[1] << 8)
3135 + (STp->buffer)->b_data[2];
3136 *partition = 0;
3137 } else {
3138 *block = ((STp->buffer)->b_data[4] << 24)
3139 + ((STp->buffer)->b_data[5] << 16)
3140 + ((STp->buffer)->b_data[6] << 8)
3141 + (STp->buffer)->b_data[7];
3142 *partition = (STp->buffer)->b_data[1];
3143 if (((STp->buffer)->b_data[0] & 0x80) &&
3144 (STp->buffer)->b_data[1] == 0) /* BOP of partition 0 */
3145 STp->ps[0].drv_block = STp->ps[0].drv_file = 0;
3146 }
3147 DEBC_printk(STp, "Got tape pos. blk %d part %d.\n",
3148 *block, *partition);
3149 }
3150 st_release_request(SRpnt);
3151 SRpnt = NULL;
3152
3153 return result;
3154}
3155
3156
3157/* Set the tape block and partition. Negative partition means that only the
3158 block should be set in vendor specific way. */
3159static int set_location(struct scsi_tape *STp, unsigned int block, int partition,
3160 int logical)
3161{
3162 struct st_partstat *STps;
3163 int result, p;
3164 unsigned int blk;
3165 int timeout;
3166 unsigned char scmd[MAX_COMMAND_SIZE];
3167 struct st_request *SRpnt;
3168
3169 if (STp->ready != ST_READY)
3170 return (-EIO);
3171 timeout = STp->long_timeout;
3172 STps = &(STp->ps[STp->partition]);
3173
3174 DEBC_printk(STp, "Setting block to %d and partition to %d.\n",
3175 block, partition);
3176 DEB(if (partition < 0)
3177 return (-EIO); )
3178
3179 /* Update the location at the partition we are leaving */
3180 if ((!STp->can_partitions && partition != 0) ||
3181 partition >= ST_NBR_PARTITIONS)
3182 return (-EINVAL);
3183 if (partition != STp->partition) {
3184 if (get_location(STp, &blk, &p, 1))
3185 STps->last_block_valid = 0;
3186 else {
3187 STps->last_block_valid = 1;
3188 STps->last_block_visited = blk;
3189 DEBC_printk(STp, "Visited block %d for "
3190 "partition %d saved.\n",
3191 blk, STp->partition);
3192 }
3193 }
3194
3195 memset(scmd, 0, MAX_COMMAND_SIZE);
3196 if ((STp->device)->scsi_level < SCSI_2) {
3197 scmd[0] = QFA_SEEK_BLOCK;
3198 scmd[2] = (block >> 16);
3199 scmd[3] = (block >> 8);
3200 scmd[4] = block;
3201 scmd[5] = 0;
3202 } else {
3203 scmd[0] = SEEK_10;
3204 scmd[3] = (block >> 24);
3205 scmd[4] = (block >> 16);
3206 scmd[5] = (block >> 8);
3207 scmd[6] = block;
3208 if (!logical && !STp->scsi2_logical)
3209 scmd[1] = 4;
3210 if (STp->partition != partition) {
3211 scmd[1] |= 2;
3212 scmd[8] = partition;
3213 DEBC_printk(STp, "Trying to change partition "
3214 "from %d to %d\n", STp->partition,
3215 partition);
3216 }
3217 }
3218 if (STp->immediate) {
3219 scmd[1] |= 1; /* Don't wait for completion */
3220 timeout = STp->device->request_queue->rq_timeout;
3221 }
3222
3223 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3224 timeout, MAX_READY_RETRIES, 1);
3225 if (!SRpnt)
3226 return (STp->buffer)->syscall_result;
3227
3228 STps->drv_block = STps->drv_file = (-1);
3229 STps->eof = ST_NOEOF;
3230 if ((STp->buffer)->syscall_result != 0) {
3231 result = (-EIO);
3232 if (STp->can_partitions &&
3233 (STp->device)->scsi_level >= SCSI_2 &&
3234 (p = find_partition(STp)) >= 0)
3235 STp->partition = p;
3236 } else {
3237 if (STp->can_partitions) {
3238 STp->partition = partition;
3239 STps = &(STp->ps[partition]);
3240 if (!STps->last_block_valid ||
3241 STps->last_block_visited != block) {
3242 STps->at_sm = 0;
3243 STps->rw = ST_IDLE;
3244 }
3245 } else
3246 STps->at_sm = 0;
3247 if (block == 0)
3248 STps->drv_block = STps->drv_file = 0;
3249 result = 0;
3250 }
3251
3252 st_release_request(SRpnt);
3253 SRpnt = NULL;
3254
3255 return result;
3256}
3257
3258
3259/* Find the current partition number for the drive status. Called from open and
3260 returns either partition number of negative error code. */
3261static int find_partition(struct scsi_tape *STp)
3262{
3263 int i, partition;
3264 unsigned int block;
3265
3266 if ((i = get_location(STp, &block, &partition, 1)) < 0)
3267 return i;
3268 if (partition >= ST_NBR_PARTITIONS)
3269 return (-EIO);
3270 return partition;
3271}
3272
3273
3274/* Change the partition if necessary */
3275static int switch_partition(struct scsi_tape *STp)
3276{
3277 struct st_partstat *STps;
3278
3279 if (STp->partition == STp->new_partition)
3280 return 0;
3281 STps = &(STp->ps[STp->new_partition]);
3282 if (!STps->last_block_valid)
3283 STps->last_block_visited = 0;
3284 return set_location(STp, STps->last_block_visited, STp->new_partition, 1);
3285}
3286
3287/* Functions for reading and writing the medium partition mode page. */
3288
3289#define PART_PAGE 0x11
3290#define PART_PAGE_FIXED_LENGTH 8
3291
3292#define PP_OFF_MAX_ADD_PARTS 2
3293#define PP_OFF_NBR_ADD_PARTS 3
3294#define PP_OFF_FLAGS 4
3295#define PP_OFF_PART_UNITS 6
3296#define PP_OFF_RESERVED 7
3297
3298#define PP_BIT_IDP 0x20
3299#define PP_BIT_FDP 0x80
3300#define PP_MSK_PSUM_MB 0x10
3301#define PP_MSK_PSUM_UNITS 0x18
3302#define PP_MSK_POFM 0x04
3303
3304/* Get the number of partitions on the tape. As a side effect reads the
3305 mode page into the tape buffer. */
3306static int nbr_partitions(struct scsi_tape *STp)
3307{
3308 int result;
3309
3310 if (STp->ready != ST_READY)
3311 return (-EIO);
3312
3313 result = read_mode_page(STp, PART_PAGE, 1);
3314
3315 if (result) {
3316 DEBC_printk(STp, "Can't read medium partition page.\n");
3317 result = (-EIO);
3318 } else {
3319 result = (STp->buffer)->b_data[MODE_HEADER_LENGTH +
3320 PP_OFF_NBR_ADD_PARTS] + 1;
3321 DEBC_printk(STp, "Number of partitions %d.\n", result);
3322 }
3323
3324 return result;
3325}
3326
3327
3328static int format_medium(struct scsi_tape *STp, int format)
3329{
3330 int result = 0;
3331 int timeout = STp->long_timeout;
3332 unsigned char scmd[MAX_COMMAND_SIZE];
3333 struct st_request *SRpnt;
3334
3335 memset(scmd, 0, MAX_COMMAND_SIZE);
3336 scmd[0] = FORMAT_UNIT;
3337 scmd[2] = format;
3338 if (STp->immediate) {
3339 scmd[1] |= 1; /* Don't wait for completion */
3340 timeout = STp->device->request_queue->rq_timeout;
3341 }
3342 DEBC_printk(STp, "Sending FORMAT MEDIUM\n");
3343 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3344 timeout, MAX_RETRIES, 1);
3345 if (!SRpnt)
3346 result = STp->buffer->syscall_result;
3347 return result;
3348}
3349
3350
3351/* Partition the tape into two partitions if size > 0 or one partition if
3352 size == 0.
3353
3354 The block descriptors are read and written because Sony SDT-7000 does not
3355 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
3356
3357 My HP C1533A drive returns only one partition size field. This is used to
3358 set the size of partition 1. There is no size field for the default partition.
3359 Michael Schaefer's Sony SDT-7000 returns two descriptors and the second is
3360 used to set the size of partition 1 (this is what the SCSI-3 standard specifies).
3361 The following algorithm is used to accommodate both drives: if the number of
3362 partition size fields is greater than the maximum number of additional partitions
3363 in the mode page, the second field is used. Otherwise the first field is used.
3364
3365 For Seagate DDS drives the page length must be 8 when no partitions is defined
3366 and 10 when 1 partition is defined (information from Eric Lee Green). This is
3367 is acceptable also to some other old drives and enforced if the first partition
3368 size field is used for the first additional partition size.
3369
3370 For drives that advertize SCSI-3 or newer, use the SSC-3 methods.
3371 */
3372static int partition_tape(struct scsi_tape *STp, int size)
3373{
3374 int result;
3375 int target_partition;
3376 bool scsi3 = STp->device->scsi_level >= SCSI_3, needs_format = false;
3377 int pgo, psd_cnt, psdo;
3378 int psum = PP_MSK_PSUM_MB, units = 0;
3379 unsigned char *bp;
3380
3381 result = read_mode_page(STp, PART_PAGE, 0);
3382 if (result) {
3383 DEBC_printk(STp, "Can't read partition mode page.\n");
3384 return result;
3385 }
3386 target_partition = 1;
3387 if (size < 0) {
3388 target_partition = 0;
3389 size = -size;
3390 }
3391
3392 /* The mode page is in the buffer. Let's modify it and write it. */
3393 bp = (STp->buffer)->b_data;
3394 pgo = MODE_HEADER_LENGTH + bp[MH_OFF_BDESCS_LENGTH];
3395 DEBC_printk(STp, "Partition page length is %d bytes.\n",
3396 bp[pgo + MP_OFF_PAGE_LENGTH] + 2);
3397
3398 psd_cnt = (bp[pgo + MP_OFF_PAGE_LENGTH] + 2 - PART_PAGE_FIXED_LENGTH) / 2;
3399
3400 if (scsi3) {
3401 needs_format = (bp[pgo + PP_OFF_FLAGS] & PP_MSK_POFM) != 0;
3402 if (needs_format && size == 0) {
3403 /* No need to write the mode page when clearing
3404 * partitioning
3405 */
3406 DEBC_printk(STp, "Formatting tape with one partition.\n");
3407 result = format_medium(STp, 0);
3408 goto out;
3409 }
3410 if (needs_format) /* Leave the old value for HP DATs claiming SCSI_3 */
3411 psd_cnt = 2;
3412 if ((bp[pgo + PP_OFF_FLAGS] & PP_MSK_PSUM_UNITS) == PP_MSK_PSUM_UNITS) {
3413 /* Use units scaling for large partitions if the device
3414 * suggests it and no precision lost. Required for IBM
3415 * TS1140/50 drives that don't support MB units.
3416 */
3417 if (size >= 1000 && (size % 1000) == 0) {
3418 size /= 1000;
3419 psum = PP_MSK_PSUM_UNITS;
3420 units = 9; /* GB */
3421 }
3422 }
3423 /* Try it anyway if too large to specify in MB */
3424 if (psum == PP_MSK_PSUM_MB && size >= 65534) {
3425 size /= 1000;
3426 psum = PP_MSK_PSUM_UNITS;
3427 units = 9; /* GB */
3428 }
3429 }
3430
3431 if (size >= 65535 || /* Does not fit into two bytes */
3432 (target_partition == 0 && psd_cnt < 2)) {
3433 result = -EINVAL;
3434 goto out;
3435 }
3436
3437 psdo = pgo + PART_PAGE_FIXED_LENGTH;
3438 /* The second condition is for HP DDS which use only one partition size
3439 * descriptor
3440 */
3441 if (target_partition > 0 &&
3442 (psd_cnt > bp[pgo + PP_OFF_MAX_ADD_PARTS] ||
3443 bp[pgo + PP_OFF_MAX_ADD_PARTS] != 1)) {
3444 bp[psdo] = bp[psdo + 1] = 0xff; /* Rest to partition 0 */
3445 psdo += 2;
3446 }
3447 memset(bp + psdo, 0, bp[pgo + PP_OFF_NBR_ADD_PARTS] * 2);
3448
3449 DEBC_printk(STp, "psd_cnt %d, max.parts %d, nbr_parts %d\n",
3450 psd_cnt, bp[pgo + PP_OFF_MAX_ADD_PARTS],
3451 bp[pgo + PP_OFF_NBR_ADD_PARTS]);
3452
3453 if (size == 0) {
3454 bp[pgo + PP_OFF_NBR_ADD_PARTS] = 0;
3455 if (psd_cnt <= bp[pgo + PP_OFF_MAX_ADD_PARTS])
3456 bp[pgo + MP_OFF_PAGE_LENGTH] = 6;
3457 DEBC_printk(STp, "Formatting tape with one partition.\n");
3458 } else {
3459 bp[psdo] = (size >> 8) & 0xff;
3460 bp[psdo + 1] = size & 0xff;
3461 if (target_partition == 0)
3462 bp[psdo + 2] = bp[psdo + 3] = 0xff;
3463 bp[pgo + 3] = 1;
3464 if (bp[pgo + MP_OFF_PAGE_LENGTH] < 8)
3465 bp[pgo + MP_OFF_PAGE_LENGTH] = 8;
3466 DEBC_printk(STp,
3467 "Formatting tape with two partitions (%i = %d MB).\n",
3468 target_partition, units > 0 ? size * 1000 : size);
3469 }
3470 bp[pgo + PP_OFF_PART_UNITS] = 0;
3471 bp[pgo + PP_OFF_RESERVED] = 0;
3472 if (size != 1 || units != 0) {
3473 bp[pgo + PP_OFF_FLAGS] = PP_BIT_IDP | psum |
3474 (bp[pgo + PP_OFF_FLAGS] & 0x07);
3475 bp[pgo + PP_OFF_PART_UNITS] = units;
3476 } else
3477 bp[pgo + PP_OFF_FLAGS] = PP_BIT_FDP |
3478 (bp[pgo + PP_OFF_FLAGS] & 0x1f);
3479 bp[pgo + MP_OFF_PAGE_LENGTH] = 6 + psd_cnt * 2;
3480
3481 result = write_mode_page(STp, PART_PAGE, 1);
3482
3483 if (!result && needs_format)
3484 result = format_medium(STp, 1);
3485
3486 if (result) {
3487 st_printk(KERN_INFO, STp, "Partitioning of tape failed.\n");
3488 result = (-EIO);
3489 }
3490
3491out:
3492 return result;
3493}
3494
3495
3496
3497/* The ioctl command */
3498static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3499{
3500 int i, cmd_nr, cmd_type, bt;
3501 int retval = 0;
3502 unsigned int blk;
3503 struct scsi_tape *STp = file->private_data;
3504 struct st_modedef *STm;
3505 struct st_partstat *STps;
3506 void __user *p = (void __user *)arg;
3507
3508 if (mutex_lock_interruptible(&STp->lock))
3509 return -ERESTARTSYS;
3510
3511 DEB(
3512 if (debugging && !STp->in_use) {
3513 st_printk(ST_DEB_MSG, STp, "Incorrect device.\n");
3514 retval = (-EIO);
3515 goto out;
3516 } ) /* end DEB */
3517
3518 STm = &(STp->modes[STp->current_mode]);
3519 STps = &(STp->ps[STp->partition]);
3520
3521 /*
3522 * If we are in the middle of error recovery, don't let anyone
3523 * else try and use this device. Also, if error recovery fails, it
3524 * may try and take the device offline, in which case all further
3525 * access to the device is prohibited.
3526 */
3527 retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in,
3528 file->f_flags & O_NDELAY);
3529 if (retval)
3530 goto out;
3531
3532 cmd_type = _IOC_TYPE(cmd_in);
3533 cmd_nr = _IOC_NR(cmd_in);
3534
3535 if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
3536 struct mtop mtc;
3537
3538 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
3539 retval = (-EINVAL);
3540 goto out;
3541 }
3542
3543 i = copy_from_user(&mtc, p, sizeof(struct mtop));
3544 if (i) {
3545 retval = (-EFAULT);
3546 goto out;
3547 }
3548
3549 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
3550 st_printk(KERN_WARNING, STp,
3551 "MTSETDRVBUFFER only allowed for root.\n");
3552 retval = (-EPERM);
3553 goto out;
3554 }
3555 if (!STm->defined &&
3556 (mtc.mt_op != MTSETDRVBUFFER &&
3557 (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
3558 retval = (-ENXIO);
3559 goto out;
3560 }
3561
3562 if (!STp->pos_unknown) {
3563
3564 if (STps->eof == ST_FM_HIT) {
3565 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3566 mtc.mt_op == MTEOM) {
3567 mtc.mt_count -= 1;
3568 if (STps->drv_file >= 0)
3569 STps->drv_file += 1;
3570 } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
3571 mtc.mt_count += 1;
3572 if (STps->drv_file >= 0)
3573 STps->drv_file += 1;
3574 }
3575 }
3576
3577 if (mtc.mt_op == MTSEEK) {
3578 /* Old position must be restored if partition will be
3579 changed */
3580 i = !STp->can_partitions ||
3581 (STp->new_partition != STp->partition);
3582 } else {
3583 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3584 mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
3585 mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
3586 mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3587 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
3588 mtc.mt_op == MTCOMPRESSION;
3589 }
3590 i = flush_buffer(STp, i);
3591 if (i < 0) {
3592 retval = i;
3593 goto out;
3594 }
3595 if (STps->rw == ST_WRITING &&
3596 (mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3597 mtc.mt_op == MTSEEK ||
3598 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)) {
3599 i = st_int_ioctl(STp, MTWEOF, 1);
3600 if (i < 0) {
3601 retval = i;
3602 goto out;
3603 }
3604 if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)
3605 mtc.mt_count++;
3606 STps->rw = ST_IDLE;
3607 }
3608
3609 } else {
3610 /*
3611 * If there was a bus reset, block further access
3612 * to this device. If the user wants to rewind the tape,
3613 * then reset the flag and allow access again.
3614 */
3615 if (mtc.mt_op != MTREW &&
3616 mtc.mt_op != MTOFFL &&
3617 mtc.mt_op != MTRETEN &&
3618 mtc.mt_op != MTERASE &&
3619 mtc.mt_op != MTSEEK &&
3620 mtc.mt_op != MTEOM) {
3621 retval = (-EIO);
3622 goto out;
3623 }
3624 reset_state(STp);
3625 /* remove this when the midlevel properly clears was_reset */
3626 STp->device->was_reset = 0;
3627 }
3628
3629 if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
3630 mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTWSM &&
3631 mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART)
3632 STps->rw = ST_IDLE; /* Prevent automatic WEOF and fsf */
3633
3634 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
3635 do_door_lock(STp, 0); /* Ignore result! */
3636
3637 if (mtc.mt_op == MTSETDRVBUFFER &&
3638 (mtc.mt_count & MT_ST_OPTIONS) != 0) {
3639 retval = st_set_options(STp, mtc.mt_count);
3640 goto out;
3641 }
3642
3643 if (mtc.mt_op == MTSETPART) {
3644 if (!STp->can_partitions ||
3645 mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) {
3646 retval = (-EINVAL);
3647 goto out;
3648 }
3649 if (mtc.mt_count >= STp->nbr_partitions &&
3650 (STp->nbr_partitions = nbr_partitions(STp)) < 0) {
3651 retval = (-EIO);
3652 goto out;
3653 }
3654 if (mtc.mt_count >= STp->nbr_partitions) {
3655 retval = (-EINVAL);
3656 goto out;
3657 }
3658 STp->new_partition = mtc.mt_count;
3659 retval = 0;
3660 goto out;
3661 }
3662
3663 if (mtc.mt_op == MTMKPART) {
3664 if (!STp->can_partitions) {
3665 retval = (-EINVAL);
3666 goto out;
3667 }
3668 i = do_load_unload(STp, file, 1);
3669 if (i < 0) {
3670 retval = i;
3671 goto out;
3672 }
3673 i = partition_tape(STp, mtc.mt_count);
3674 if (i < 0) {
3675 retval = i;
3676 goto out;
3677 }
3678 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
3679 STp->ps[i].rw = ST_IDLE;
3680 STp->ps[i].at_sm = 0;
3681 STp->ps[i].last_block_valid = 0;
3682 }
3683 STp->partition = STp->new_partition = 0;
3684 STp->nbr_partitions = mtc.mt_count != 0 ? 2 : 1;
3685 STps->drv_block = STps->drv_file = 0;
3686 retval = 0;
3687 goto out;
3688 }
3689
3690 if (mtc.mt_op == MTSEEK) {
3691 i = set_location(STp, mtc.mt_count, STp->new_partition, 0);
3692 if (!STp->can_partitions)
3693 STp->ps[0].rw = ST_IDLE;
3694 retval = i;
3695 goto out;
3696 }
3697
3698 if (mtc.mt_op == MTUNLOAD || mtc.mt_op == MTOFFL) {
3699 retval = do_load_unload(STp, file, 0);
3700 goto out;
3701 }
3702
3703 if (mtc.mt_op == MTLOAD) {
3704 retval = do_load_unload(STp, file, max(1, mtc.mt_count));
3705 goto out;
3706 }
3707
3708 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
3709 retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
3710 goto out;
3711 }
3712
3713 if (STp->can_partitions && STp->ready == ST_READY &&
3714 (i = switch_partition(STp)) < 0) {
3715 retval = i;
3716 goto out;
3717 }
3718
3719 if (mtc.mt_op == MTCOMPRESSION)
3720 retval = st_compression(STp, (mtc.mt_count & 1));
3721 else
3722 retval = st_int_ioctl(STp, mtc.mt_op, mtc.mt_count);
3723 goto out;
3724 }
3725 if (!STm->defined) {
3726 retval = (-ENXIO);
3727 goto out;
3728 }
3729
3730 if ((i = flush_buffer(STp, 0)) < 0) {
3731 retval = i;
3732 goto out;
3733 }
3734 if (STp->can_partitions &&
3735 (i = switch_partition(STp)) < 0) {
3736 retval = i;
3737 goto out;
3738 }
3739
3740 if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
3741 struct mtget mt_status;
3742
3743 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
3744 retval = (-EINVAL);
3745 goto out;
3746 }
3747
3748 mt_status.mt_type = STp->tape_type;
3749 mt_status.mt_dsreg =
3750 ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
3751 ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
3752 mt_status.mt_blkno = STps->drv_block;
3753 mt_status.mt_fileno = STps->drv_file;
3754 if (STp->block_size != 0) {
3755 if (STps->rw == ST_WRITING)
3756 mt_status.mt_blkno +=
3757 (STp->buffer)->buffer_bytes / STp->block_size;
3758 else if (STps->rw == ST_READING)
3759 mt_status.mt_blkno -=
3760 ((STp->buffer)->buffer_bytes +
3761 STp->block_size - 1) / STp->block_size;
3762 }
3763
3764 mt_status.mt_gstat = 0;
3765 if (STp->drv_write_prot)
3766 mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
3767 if (mt_status.mt_blkno == 0) {
3768 if (mt_status.mt_fileno == 0)
3769 mt_status.mt_gstat |= GMT_BOT(0xffffffff);
3770 else
3771 mt_status.mt_gstat |= GMT_EOF(0xffffffff);
3772 }
3773 mt_status.mt_erreg = (STp->recover_reg << MT_ST_SOFTERR_SHIFT);
3774 mt_status.mt_resid = STp->partition;
3775 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
3776 mt_status.mt_gstat |= GMT_EOT(0xffffffff);
3777 else if (STps->eof >= ST_EOM_OK)
3778 mt_status.mt_gstat |= GMT_EOD(0xffffffff);
3779 if (STp->density == 1)
3780 mt_status.mt_gstat |= GMT_D_800(0xffffffff);
3781 else if (STp->density == 2)
3782 mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
3783 else if (STp->density == 3)
3784 mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
3785 if (STp->ready == ST_READY)
3786 mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
3787 if (STp->ready == ST_NO_TAPE)
3788 mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
3789 if (STps->at_sm)
3790 mt_status.mt_gstat |= GMT_SM(0xffffffff);
3791 if (STm->do_async_writes ||
3792 (STm->do_buffer_writes && STp->block_size != 0) ||
3793 STp->drv_buffer != 0)
3794 mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
3795 if (STp->cleaning_req)
3796 mt_status.mt_gstat |= GMT_CLN(0xffffffff);
3797
3798 i = copy_to_user(p, &mt_status, sizeof(struct mtget));
3799 if (i) {
3800 retval = (-EFAULT);
3801 goto out;
3802 }
3803
3804 STp->recover_reg = 0; /* Clear after read */
3805 retval = 0;
3806 goto out;
3807 } /* End of MTIOCGET */
3808 if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
3809 struct mtpos mt_pos;
3810 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
3811 retval = (-EINVAL);
3812 goto out;
3813 }
3814 if ((i = get_location(STp, &blk, &bt, 0)) < 0) {
3815 retval = i;
3816 goto out;
3817 }
3818 mt_pos.mt_blkno = blk;
3819 i = copy_to_user(p, &mt_pos, sizeof(struct mtpos));
3820 if (i)
3821 retval = (-EFAULT);
3822 goto out;
3823 }
3824 mutex_unlock(&STp->lock);
3825 switch (cmd_in) {
3826 case SCSI_IOCTL_GET_IDLUN:
3827 case SCSI_IOCTL_GET_BUS_NUMBER:
3828 break;
3829 default:
3830 if ((cmd_in == SG_IO ||
3831 cmd_in == SCSI_IOCTL_SEND_COMMAND ||
3832 cmd_in == CDROM_SEND_PACKET) &&
3833 !capable(CAP_SYS_RAWIO))
3834 i = -EPERM;
3835 else
3836 i = scsi_cmd_ioctl(STp->disk->queue, STp->disk,
3837 file->f_mode, cmd_in, p);
3838 if (i != -ENOTTY)
3839 return i;
3840 break;
3841 }
3842 retval = scsi_ioctl(STp->device, cmd_in, p);
3843 if (!retval && cmd_in == SCSI_IOCTL_STOP_UNIT) { /* unload */
3844 STp->rew_at_close = 0;
3845 STp->ready = ST_NO_TAPE;
3846 }
3847 return retval;
3848
3849 out:
3850 mutex_unlock(&STp->lock);
3851 return retval;
3852}
3853
3854#ifdef CONFIG_COMPAT
3855static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
3856{
3857 struct scsi_tape *STp = file->private_data;
3858 struct scsi_device *sdev = STp->device;
3859 int ret = -ENOIOCTLCMD;
3860 if (sdev->host->hostt->compat_ioctl) {
3861
3862 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
3863
3864 }
3865 return ret;
3866}
3867#endif
3868
3869
3870
3871/* Try to allocate a new tape buffer. Calling function must not hold
3872 dev_arr_lock. */
3873static struct st_buffer *new_tape_buffer(int need_dma, int max_sg)
3874{
3875 struct st_buffer *tb;
3876
3877 tb = kzalloc(sizeof(struct st_buffer), GFP_ATOMIC);
3878 if (!tb) {
3879 printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
3880 return NULL;
3881 }
3882 tb->frp_segs = 0;
3883 tb->use_sg = max_sg;
3884 tb->dma = need_dma;
3885 tb->buffer_size = 0;
3886
3887 tb->reserved_pages = kzalloc(max_sg * sizeof(struct page *),
3888 GFP_ATOMIC);
3889 if (!tb->reserved_pages) {
3890 kfree(tb);
3891 return NULL;
3892 }
3893
3894 return tb;
3895}
3896
3897
3898/* Try to allocate enough space in the tape buffer */
3899#define ST_MAX_ORDER 6
3900
3901static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma)
3902{
3903 int segs, max_segs, b_size, order, got;
3904 gfp_t priority;
3905
3906 if (new_size <= STbuffer->buffer_size)
3907 return 1;
3908
3909 if (STbuffer->buffer_size <= PAGE_SIZE)
3910 normalize_buffer(STbuffer); /* Avoid extra segment */
3911
3912 max_segs = STbuffer->use_sg;
3913
3914 priority = GFP_KERNEL | __GFP_NOWARN;
3915 if (need_dma)
3916 priority |= GFP_DMA;
3917
3918 if (STbuffer->cleared)
3919 priority |= __GFP_ZERO;
3920
3921 if (STbuffer->frp_segs) {
3922 order = STbuffer->reserved_page_order;
3923 b_size = PAGE_SIZE << order;
3924 } else {
3925 for (b_size = PAGE_SIZE, order = 0;
3926 order < ST_MAX_ORDER &&
3927 max_segs * (PAGE_SIZE << order) < new_size;
3928 order++, b_size *= 2)
3929 ; /* empty */
3930 STbuffer->reserved_page_order = order;
3931 }
3932 if (max_segs * (PAGE_SIZE << order) < new_size) {
3933 if (order == ST_MAX_ORDER)
3934 return 0;
3935 normalize_buffer(STbuffer);
3936 return enlarge_buffer(STbuffer, new_size, need_dma);
3937 }
3938
3939 for (segs = STbuffer->frp_segs, got = STbuffer->buffer_size;
3940 segs < max_segs && got < new_size;) {
3941 struct page *page;
3942
3943 page = alloc_pages(priority, order);
3944 if (!page) {
3945 DEB(STbuffer->buffer_size = got);
3946 normalize_buffer(STbuffer);
3947 return 0;
3948 }
3949
3950 STbuffer->frp_segs += 1;
3951 got += b_size;
3952 STbuffer->buffer_size = got;
3953 STbuffer->reserved_pages[segs] = page;
3954 segs++;
3955 }
3956 STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
3957
3958 return 1;
3959}
3960
3961
3962/* Make sure that no data from previous user is in the internal buffer */
3963static void clear_buffer(struct st_buffer * st_bp)
3964{
3965 int i;
3966
3967 for (i=0; i < st_bp->frp_segs; i++)
3968 memset(page_address(st_bp->reserved_pages[i]), 0,
3969 PAGE_SIZE << st_bp->reserved_page_order);
3970 st_bp->cleared = 1;
3971}
3972
3973
3974/* Release the extra buffer */
3975static void normalize_buffer(struct st_buffer * STbuffer)
3976{
3977 int i, order = STbuffer->reserved_page_order;
3978
3979 for (i = 0; i < STbuffer->frp_segs; i++) {
3980 __free_pages(STbuffer->reserved_pages[i], order);
3981 STbuffer->buffer_size -= (PAGE_SIZE << order);
3982 }
3983 STbuffer->frp_segs = 0;
3984 STbuffer->sg_segs = 0;
3985 STbuffer->reserved_page_order = 0;
3986 STbuffer->map_data.offset = 0;
3987}
3988
3989
3990/* Move data from the user buffer to the tape buffer. Returns zero (success) or
3991 negative error code. */
3992static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count)
3993{
3994 int i, cnt, res, offset;
3995 int length = PAGE_SIZE << st_bp->reserved_page_order;
3996
3997 for (i = 0, offset = st_bp->buffer_bytes;
3998 i < st_bp->frp_segs && offset >= length; i++)
3999 offset -= length;
4000 if (i == st_bp->frp_segs) { /* Should never happen */
4001 printk(KERN_WARNING "st: append_to_buffer offset overflow.\n");
4002 return (-EIO);
4003 }
4004 for (; i < st_bp->frp_segs && do_count > 0; i++) {
4005 struct page *page = st_bp->reserved_pages[i];
4006 cnt = length - offset < do_count ? length - offset : do_count;
4007 res = copy_from_user(page_address(page) + offset, ubp, cnt);
4008 if (res)
4009 return (-EFAULT);
4010 do_count -= cnt;
4011 st_bp->buffer_bytes += cnt;
4012 ubp += cnt;
4013 offset = 0;
4014 }
4015 if (do_count) /* Should never happen */
4016 return (-EIO);
4017
4018 return 0;
4019}
4020
4021
4022/* Move data from the tape buffer to the user buffer. Returns zero (success) or
4023 negative error code. */
4024static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count)
4025{
4026 int i, cnt, res, offset;
4027 int length = PAGE_SIZE << st_bp->reserved_page_order;
4028
4029 for (i = 0, offset = st_bp->read_pointer;
4030 i < st_bp->frp_segs && offset >= length; i++)
4031 offset -= length;
4032 if (i == st_bp->frp_segs) { /* Should never happen */
4033 printk(KERN_WARNING "st: from_buffer offset overflow.\n");
4034 return (-EIO);
4035 }
4036 for (; i < st_bp->frp_segs && do_count > 0; i++) {
4037 struct page *page = st_bp->reserved_pages[i];
4038 cnt = length - offset < do_count ? length - offset : do_count;
4039 res = copy_to_user(ubp, page_address(page) + offset, cnt);
4040 if (res)
4041 return (-EFAULT);
4042 do_count -= cnt;
4043 st_bp->buffer_bytes -= cnt;
4044 st_bp->read_pointer += cnt;
4045 ubp += cnt;
4046 offset = 0;
4047 }
4048 if (do_count) /* Should never happen */
4049 return (-EIO);
4050
4051 return 0;
4052}
4053
4054
4055/* Move data towards start of buffer */
4056static void move_buffer_data(struct st_buffer * st_bp, int offset)
4057{
4058 int src_seg, dst_seg, src_offset = 0, dst_offset;
4059 int count, total;
4060 int length = PAGE_SIZE << st_bp->reserved_page_order;
4061
4062 if (offset == 0)
4063 return;
4064
4065 total=st_bp->buffer_bytes - offset;
4066 for (src_seg=0; src_seg < st_bp->frp_segs; src_seg++) {
4067 src_offset = offset;
4068 if (src_offset < length)
4069 break;
4070 offset -= length;
4071 }
4072
4073 st_bp->buffer_bytes = st_bp->read_pointer = total;
4074 for (dst_seg=dst_offset=0; total > 0; ) {
4075 struct page *dpage = st_bp->reserved_pages[dst_seg];
4076 struct page *spage = st_bp->reserved_pages[src_seg];
4077
4078 count = min(length - dst_offset, length - src_offset);
4079 memmove(page_address(dpage) + dst_offset,
4080 page_address(spage) + src_offset, count);
4081 src_offset += count;
4082 if (src_offset >= length) {
4083 src_seg++;
4084 src_offset = 0;
4085 }
4086 dst_offset += count;
4087 if (dst_offset >= length) {
4088 dst_seg++;
4089 dst_offset = 0;
4090 }
4091 total -= count;
4092 }
4093}
4094
4095/* Validate the options from command line or module parameters */
4096static void validate_options(void)
4097{
4098 if (buffer_kbs > 0)
4099 st_fixed_buffer_size = buffer_kbs * ST_KILOBYTE;
4100 if (max_sg_segs >= ST_FIRST_SG)
4101 st_max_sg_segs = max_sg_segs;
4102}
4103
4104#ifndef MODULE
4105/* Set the boot options. Syntax is defined in Documenation/scsi/st.txt.
4106 */
4107static int __init st_setup(char *str)
4108{
4109 int i, len, ints[5];
4110 char *stp;
4111
4112 stp = get_options(str, ARRAY_SIZE(ints), ints);
4113
4114 if (ints[0] > 0) {
4115 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
4116 if (parms[i].val)
4117 *parms[i].val = ints[i + 1];
4118 } else {
4119 while (stp != NULL) {
4120 for (i = 0; i < ARRAY_SIZE(parms); i++) {
4121 len = strlen(parms[i].name);
4122 if (!strncmp(stp, parms[i].name, len) &&
4123 (*(stp + len) == ':' || *(stp + len) == '=')) {
4124 if (parms[i].val)
4125 *parms[i].val =
4126 simple_strtoul(stp + len + 1, NULL, 0);
4127 else
4128 printk(KERN_WARNING "st: Obsolete parameter %s\n",
4129 parms[i].name);
4130 break;
4131 }
4132 }
4133 if (i >= ARRAY_SIZE(parms))
4134 printk(KERN_WARNING "st: invalid parameter in '%s'\n",
4135 stp);
4136 stp = strchr(stp, ',');
4137 if (stp)
4138 stp++;
4139 }
4140 }
4141
4142 validate_options();
4143
4144 return 1;
4145}
4146
4147__setup("st=", st_setup);
4148
4149#endif
4150
4151static const struct file_operations st_fops =
4152{
4153 .owner = THIS_MODULE,
4154 .read = st_read,
4155 .write = st_write,
4156 .unlocked_ioctl = st_ioctl,
4157#ifdef CONFIG_COMPAT
4158 .compat_ioctl = st_compat_ioctl,
4159#endif
4160 .open = st_open,
4161 .flush = st_flush,
4162 .release = st_release,
4163 .llseek = noop_llseek,
4164};
4165
4166static int create_one_cdev(struct scsi_tape *tape, int mode, int rew)
4167{
4168 int i, error;
4169 dev_t cdev_devno;
4170 struct cdev *cdev;
4171 struct device *dev;
4172 struct st_modedef *STm = &(tape->modes[mode]);
4173 char name[10];
4174 int dev_num = tape->index;
4175
4176 cdev_devno = MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, rew));
4177
4178 cdev = cdev_alloc();
4179 if (!cdev) {
4180 pr_err("st%d: out of memory. Device not attached.\n", dev_num);
4181 error = -ENOMEM;
4182 goto out;
4183 }
4184 cdev->owner = THIS_MODULE;
4185 cdev->ops = &st_fops;
4186 STm->cdevs[rew] = cdev;
4187
4188 error = cdev_add(cdev, cdev_devno, 1);
4189 if (error) {
4190 pr_err("st%d: Can't add %s-rewind mode %d\n", dev_num,
4191 rew ? "non" : "auto", mode);
4192 pr_err("st%d: Device not attached.\n", dev_num);
4193 goto out_free;
4194 }
4195
4196 i = mode << (4 - ST_NBR_MODE_BITS);
4197 snprintf(name, 10, "%s%s%s", rew ? "n" : "",
4198 tape->disk->disk_name, st_formats[i]);
4199
4200 dev = device_create(&st_sysfs_class, &tape->device->sdev_gendev,
4201 cdev_devno, &tape->modes[mode], "%s", name);
4202 if (IS_ERR(dev)) {
4203 pr_err("st%d: device_create failed\n", dev_num);
4204 error = PTR_ERR(dev);
4205 goto out_free;
4206 }
4207
4208 STm->devs[rew] = dev;
4209
4210 return 0;
4211out_free:
4212 cdev_del(STm->cdevs[rew]);
4213out:
4214 STm->cdevs[rew] = NULL;
4215 STm->devs[rew] = NULL;
4216 return error;
4217}
4218
4219static int create_cdevs(struct scsi_tape *tape)
4220{
4221 int mode, error;
4222 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4223 error = create_one_cdev(tape, mode, 0);
4224 if (error)
4225 return error;
4226 error = create_one_cdev(tape, mode, 1);
4227 if (error)
4228 return error;
4229 }
4230
4231 return sysfs_create_link(&tape->device->sdev_gendev.kobj,
4232 &tape->modes[0].devs[0]->kobj, "tape");
4233}
4234
4235static void remove_cdevs(struct scsi_tape *tape)
4236{
4237 int mode, rew;
4238 sysfs_remove_link(&tape->device->sdev_gendev.kobj, "tape");
4239 for (mode = 0; mode < ST_NBR_MODES; mode++) {
4240 struct st_modedef *STm = &(tape->modes[mode]);
4241 for (rew = 0; rew < 2; rew++) {
4242 if (STm->cdevs[rew])
4243 cdev_del(STm->cdevs[rew]);
4244 if (STm->devs[rew])
4245 device_unregister(STm->devs[rew]);
4246 }
4247 }
4248}
4249
4250static int st_probe(struct device *dev)
4251{
4252 struct scsi_device *SDp = to_scsi_device(dev);
4253 struct gendisk *disk = NULL;
4254 struct scsi_tape *tpnt = NULL;
4255 struct st_modedef *STm;
4256 struct st_partstat *STps;
4257 struct st_buffer *buffer;
4258 int i, error;
4259 char *stp;
4260
4261 if (SDp->type != TYPE_TAPE)
4262 return -ENODEV;
4263 if ((stp = st_incompatible(SDp))) {
4264 sdev_printk(KERN_INFO, SDp, "Found incompatible tape\n");
4265 sdev_printk(KERN_INFO, SDp,
4266 "st: The suggested driver is %s.\n", stp);
4267 return -ENODEV;
4268 }
4269
4270 scsi_autopm_get_device(SDp);
4271 i = queue_max_segments(SDp->request_queue);
4272 if (st_max_sg_segs < i)
4273 i = st_max_sg_segs;
4274 buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i);
4275 if (buffer == NULL) {
4276 sdev_printk(KERN_ERR, SDp,
4277 "st: Can't allocate new tape buffer. "
4278 "Device not attached.\n");
4279 goto out;
4280 }
4281
4282 disk = alloc_disk(1);
4283 if (!disk) {
4284 sdev_printk(KERN_ERR, SDp,
4285 "st: out of memory. Device not attached.\n");
4286 goto out_buffer_free;
4287 }
4288
4289 tpnt = kzalloc(sizeof(struct scsi_tape), GFP_ATOMIC);
4290 if (tpnt == NULL) {
4291 sdev_printk(KERN_ERR, SDp,
4292 "st: Can't allocate device descriptor.\n");
4293 goto out_put_disk;
4294 }
4295 kref_init(&tpnt->kref);
4296 tpnt->disk = disk;
4297 disk->private_data = &tpnt->driver;
4298 disk->queue = SDp->request_queue;
4299 /* SCSI tape doesn't register this gendisk via add_disk(). Manually
4300 * take queue reference that release_disk() expects. */
4301 if (!blk_get_queue(disk->queue))
4302 goto out_put_disk;
4303 tpnt->driver = &st_template;
4304
4305 tpnt->device = SDp;
4306 if (SDp->scsi_level <= 2)
4307 tpnt->tape_type = MT_ISSCSI1;
4308 else
4309 tpnt->tape_type = MT_ISSCSI2;
4310
4311 tpnt->buffer = buffer;
4312 tpnt->buffer->last_SRpnt = NULL;
4313
4314 tpnt->inited = 0;
4315 tpnt->dirty = 0;
4316 tpnt->in_use = 0;
4317 tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
4318 tpnt->restr_dma = (SDp->host)->unchecked_isa_dma;
4319 tpnt->use_pf = (SDp->scsi_level >= SCSI_2);
4320 tpnt->density = 0;
4321 tpnt->do_auto_lock = ST_AUTO_LOCK;
4322 tpnt->can_bsr = (SDp->scsi_level > 2 ? 1 : ST_IN_FILE_POS); /* BSR mandatory in SCSI3 */
4323 tpnt->can_partitions = 0;
4324 tpnt->two_fm = ST_TWO_FM;
4325 tpnt->fast_mteom = ST_FAST_MTEOM;
4326 tpnt->scsi2_logical = ST_SCSI2LOGICAL;
4327 tpnt->sili = ST_SILI;
4328 tpnt->immediate = ST_NOWAIT;
4329 tpnt->immediate_filemark = 0;
4330 tpnt->default_drvbuffer = 0xff; /* No forced buffering */
4331 tpnt->partition = 0;
4332 tpnt->new_partition = 0;
4333 tpnt->nbr_partitions = 0;
4334 blk_queue_rq_timeout(tpnt->device->request_queue, ST_TIMEOUT);
4335 tpnt->long_timeout = ST_LONG_TIMEOUT;
4336 tpnt->try_dio = try_direct_io && !SDp->host->unchecked_isa_dma;
4337
4338 for (i = 0; i < ST_NBR_MODES; i++) {
4339 STm = &(tpnt->modes[i]);
4340 STm->defined = 0;
4341 STm->sysv = ST_SYSV;
4342 STm->defaults_for_writes = 0;
4343 STm->do_async_writes = ST_ASYNC_WRITES;
4344 STm->do_buffer_writes = ST_BUFFER_WRITES;
4345 STm->do_read_ahead = ST_READ_AHEAD;
4346 STm->default_compression = ST_DONT_TOUCH;
4347 STm->default_blksize = (-1); /* No forced size */
4348 STm->default_density = (-1); /* No forced density */
4349 STm->tape = tpnt;
4350 }
4351
4352 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
4353 STps = &(tpnt->ps[i]);
4354 STps->rw = ST_IDLE;
4355 STps->eof = ST_NOEOF;
4356 STps->at_sm = 0;
4357 STps->last_block_valid = 0;
4358 STps->drv_block = (-1);
4359 STps->drv_file = (-1);
4360 }
4361
4362 tpnt->current_mode = 0;
4363 tpnt->modes[0].defined = 1;
4364
4365 tpnt->density_changed = tpnt->compression_changed =
4366 tpnt->blksize_changed = 0;
4367 mutex_init(&tpnt->lock);
4368
4369 idr_preload(GFP_KERNEL);
4370 spin_lock(&st_index_lock);
4371 error = idr_alloc(&st_index_idr, tpnt, 0, ST_MAX_TAPES + 1, GFP_NOWAIT);
4372 spin_unlock(&st_index_lock);
4373 idr_preload_end();
4374 if (error < 0) {
4375 pr_warn("st: idr allocation failed: %d\n", error);
4376 goto out_put_queue;
4377 }
4378 tpnt->index = error;
4379 sprintf(disk->disk_name, "st%d", tpnt->index);
4380 tpnt->stats = kzalloc(sizeof(struct scsi_tape_stats), GFP_KERNEL);
4381 if (tpnt->stats == NULL) {
4382 sdev_printk(KERN_ERR, SDp,
4383 "st: Can't allocate statistics.\n");
4384 goto out_idr_remove;
4385 }
4386
4387 dev_set_drvdata(dev, tpnt);
4388
4389
4390 error = create_cdevs(tpnt);
4391 if (error)
4392 goto out_remove_devs;
4393 scsi_autopm_put_device(SDp);
4394
4395 sdev_printk(KERN_NOTICE, SDp,
4396 "Attached scsi tape %s\n", tape_name(tpnt));
4397 sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n",
4398 tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
4399 queue_dma_alignment(SDp->request_queue) + 1);
4400
4401 return 0;
4402
4403out_remove_devs:
4404 remove_cdevs(tpnt);
4405 kfree(tpnt->stats);
4406out_idr_remove:
4407 spin_lock(&st_index_lock);
4408 idr_remove(&st_index_idr, tpnt->index);
4409 spin_unlock(&st_index_lock);
4410out_put_queue:
4411 blk_put_queue(disk->queue);
4412out_put_disk:
4413 put_disk(disk);
4414 kfree(tpnt);
4415out_buffer_free:
4416 kfree(buffer);
4417out:
4418 scsi_autopm_put_device(SDp);
4419 return -ENODEV;
4420};
4421
4422
4423static int st_remove(struct device *dev)
4424{
4425 struct scsi_tape *tpnt = dev_get_drvdata(dev);
4426 int index = tpnt->index;
4427
4428 scsi_autopm_get_device(to_scsi_device(dev));
4429 remove_cdevs(tpnt);
4430
4431 mutex_lock(&st_ref_mutex);
4432 kref_put(&tpnt->kref, scsi_tape_release);
4433 mutex_unlock(&st_ref_mutex);
4434 spin_lock(&st_index_lock);
4435 idr_remove(&st_index_idr, index);
4436 spin_unlock(&st_index_lock);
4437 return 0;
4438}
4439
4440/**
4441 * scsi_tape_release - Called to free the Scsi_Tape structure
4442 * @kref: pointer to embedded kref
4443 *
4444 * st_ref_mutex must be held entering this routine. Because it is
4445 * called on last put, you should always use the scsi_tape_get()
4446 * scsi_tape_put() helpers which manipulate the semaphore directly
4447 * and never do a direct kref_put().
4448 **/
4449static void scsi_tape_release(struct kref *kref)
4450{
4451 struct scsi_tape *tpnt = to_scsi_tape(kref);
4452 struct gendisk *disk = tpnt->disk;
4453
4454 tpnt->device = NULL;
4455
4456 if (tpnt->buffer) {
4457 normalize_buffer(tpnt->buffer);
4458 kfree(tpnt->buffer->reserved_pages);
4459 kfree(tpnt->buffer);
4460 }
4461
4462 disk->private_data = NULL;
4463 put_disk(disk);
4464 kfree(tpnt->stats);
4465 kfree(tpnt);
4466 return;
4467}
4468
4469static struct class st_sysfs_class = {
4470 .name = "scsi_tape",
4471 .dev_groups = st_dev_groups,
4472};
4473
4474static int __init init_st(void)
4475{
4476 int err;
4477
4478 validate_options();
4479
4480 printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
4481 verstr, st_fixed_buffer_size, st_max_sg_segs);
4482
4483 debugging = (debug_flag > 0) ? debug_flag : NO_DEBUG;
4484 if (debugging) {
4485 printk(KERN_INFO "st: Debugging enabled debug_flag = %d\n",
4486 debugging);
4487 }
4488
4489 err = class_register(&st_sysfs_class);
4490 if (err) {
4491 pr_err("Unable register sysfs class for SCSI tapes\n");
4492 return err;
4493 }
4494
4495 err = register_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4496 ST_MAX_TAPE_ENTRIES, "st");
4497 if (err) {
4498 printk(KERN_ERR "Unable to get major %d for SCSI tapes\n",
4499 SCSI_TAPE_MAJOR);
4500 goto err_class;
4501 }
4502
4503 err = scsi_register_driver(&st_template.gendrv);
4504 if (err)
4505 goto err_chrdev;
4506
4507 return 0;
4508
4509err_chrdev:
4510 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4511 ST_MAX_TAPE_ENTRIES);
4512err_class:
4513 class_unregister(&st_sysfs_class);
4514 return err;
4515}
4516
4517static void __exit exit_st(void)
4518{
4519 scsi_unregister_driver(&st_template.gendrv);
4520 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4521 ST_MAX_TAPE_ENTRIES);
4522 class_unregister(&st_sysfs_class);
4523 idr_destroy(&st_index_idr);
4524 printk(KERN_INFO "st: Unloaded.\n");
4525}
4526
4527module_init(init_st);
4528module_exit(exit_st);
4529
4530
4531/* The sysfs driver interface. Read-only at the moment */
4532static ssize_t try_direct_io_show(struct device_driver *ddp, char *buf)
4533{
4534 return scnprintf(buf, PAGE_SIZE, "%d\n", try_direct_io);
4535}
4536static DRIVER_ATTR_RO(try_direct_io);
4537
4538static ssize_t fixed_buffer_size_show(struct device_driver *ddp, char *buf)
4539{
4540 return scnprintf(buf, PAGE_SIZE, "%d\n", st_fixed_buffer_size);
4541}
4542static DRIVER_ATTR_RO(fixed_buffer_size);
4543
4544static ssize_t max_sg_segs_show(struct device_driver *ddp, char *buf)
4545{
4546 return scnprintf(buf, PAGE_SIZE, "%d\n", st_max_sg_segs);
4547}
4548static DRIVER_ATTR_RO(max_sg_segs);
4549
4550static ssize_t version_show(struct device_driver *ddd, char *buf)
4551{
4552 return scnprintf(buf, PAGE_SIZE, "[%s]\n", verstr);
4553}
4554static DRIVER_ATTR_RO(version);
4555
4556#if DEBUG
4557static ssize_t debug_flag_store(struct device_driver *ddp,
4558 const char *buf, size_t count)
4559{
4560/* We only care what the first byte of the data is the rest is unused.
4561 * if it's a '1' we turn on debug and if it's a '0' we disable it. All
4562 * other values have -EINVAL returned if they are passed in.
4563 */
4564 if (count > 0) {
4565 if (buf[0] == '0') {
4566 debugging = NO_DEBUG;
4567 return count;
4568 } else if (buf[0] == '1') {
4569 debugging = 1;
4570 return count;
4571 }
4572 }
4573 return -EINVAL;
4574}
4575
4576static ssize_t debug_flag_show(struct device_driver *ddp, char *buf)
4577{
4578 return scnprintf(buf, PAGE_SIZE, "%d\n", debugging);
4579}
4580static DRIVER_ATTR_RW(debug_flag);
4581#endif
4582
4583static struct attribute *st_drv_attrs[] = {
4584 &driver_attr_try_direct_io.attr,
4585 &driver_attr_fixed_buffer_size.attr,
4586 &driver_attr_max_sg_segs.attr,
4587 &driver_attr_version.attr,
4588#if DEBUG
4589 &driver_attr_debug_flag.attr,
4590#endif
4591 NULL,
4592};
4593ATTRIBUTE_GROUPS(st_drv);
4594
4595/* The sysfs simple class interface */
4596static ssize_t
4597defined_show(struct device *dev, struct device_attribute *attr, char *buf)
4598{
4599 struct st_modedef *STm = dev_get_drvdata(dev);
4600 ssize_t l = 0;
4601
4602 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->defined);
4603 return l;
4604}
4605static DEVICE_ATTR_RO(defined);
4606
4607static ssize_t
4608default_blksize_show(struct device *dev, struct device_attribute *attr,
4609 char *buf)
4610{
4611 struct st_modedef *STm = dev_get_drvdata(dev);
4612 ssize_t l = 0;
4613
4614 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_blksize);
4615 return l;
4616}
4617static DEVICE_ATTR_RO(default_blksize);
4618
4619static ssize_t
4620default_density_show(struct device *dev, struct device_attribute *attr,
4621 char *buf)
4622{
4623 struct st_modedef *STm = dev_get_drvdata(dev);
4624 ssize_t l = 0;
4625 char *fmt;
4626
4627 fmt = STm->default_density >= 0 ? "0x%02x\n" : "%d\n";
4628 l = snprintf(buf, PAGE_SIZE, fmt, STm->default_density);
4629 return l;
4630}
4631static DEVICE_ATTR_RO(default_density);
4632
4633static ssize_t
4634default_compression_show(struct device *dev, struct device_attribute *attr,
4635 char *buf)
4636{
4637 struct st_modedef *STm = dev_get_drvdata(dev);
4638 ssize_t l = 0;
4639
4640 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_compression - 1);
4641 return l;
4642}
4643static DEVICE_ATTR_RO(default_compression);
4644
4645static ssize_t
4646options_show(struct device *dev, struct device_attribute *attr, char *buf)
4647{
4648 struct st_modedef *STm = dev_get_drvdata(dev);
4649 struct scsi_tape *STp = STm->tape;
4650 int options;
4651 ssize_t l = 0;
4652
4653 options = STm->do_buffer_writes ? MT_ST_BUFFER_WRITES : 0;
4654 options |= STm->do_async_writes ? MT_ST_ASYNC_WRITES : 0;
4655 options |= STm->do_read_ahead ? MT_ST_READ_AHEAD : 0;
4656 DEB( options |= debugging ? MT_ST_DEBUGGING : 0 );
4657 options |= STp->two_fm ? MT_ST_TWO_FM : 0;
4658 options |= STp->fast_mteom ? MT_ST_FAST_MTEOM : 0;
4659 options |= STm->defaults_for_writes ? MT_ST_DEF_WRITES : 0;
4660 options |= STp->can_bsr ? MT_ST_CAN_BSR : 0;
4661 options |= STp->omit_blklims ? MT_ST_NO_BLKLIMS : 0;
4662 options |= STp->can_partitions ? MT_ST_CAN_PARTITIONS : 0;
4663 options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0;
4664 options |= STm->sysv ? MT_ST_SYSV : 0;
4665 options |= STp->immediate ? MT_ST_NOWAIT : 0;
4666 options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0;
4667 options |= STp->sili ? MT_ST_SILI : 0;
4668
4669 l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options);
4670 return l;
4671}
4672static DEVICE_ATTR_RO(options);
4673
4674/* Support for tape stats */
4675
4676/**
4677 * read_cnt_show - return read count - count of reads made from tape drive
4678 * @dev: struct device
4679 * @attr: attribute structure
4680 * @buf: buffer to return formatted data in
4681 */
4682static ssize_t read_cnt_show(struct device *dev,
4683 struct device_attribute *attr, char *buf)
4684{
4685 struct st_modedef *STm = dev_get_drvdata(dev);
4686
4687 return sprintf(buf, "%lld",
4688 (long long)atomic64_read(&STm->tape->stats->read_cnt));
4689}
4690static DEVICE_ATTR_RO(read_cnt);
4691
4692/**
4693 * read_byte_cnt_show - return read byte count - tape drives
4694 * may use blocks less than 512 bytes this gives the raw byte count of
4695 * of data read from the tape drive.
4696 * @dev: struct device
4697 * @attr: attribute structure
4698 * @buf: buffer to return formatted data in
4699 */
4700static ssize_t read_byte_cnt_show(struct device *dev,
4701 struct device_attribute *attr, char *buf)
4702{
4703 struct st_modedef *STm = dev_get_drvdata(dev);
4704
4705 return sprintf(buf, "%lld",
4706 (long long)atomic64_read(&STm->tape->stats->read_byte_cnt));
4707}
4708static DEVICE_ATTR_RO(read_byte_cnt);
4709
4710/**
4711 * read_us_show - return read us - overall time spent waiting on reads in ns.
4712 * @dev: struct device
4713 * @attr: attribute structure
4714 * @buf: buffer to return formatted data in
4715 */
4716static ssize_t read_ns_show(struct device *dev,
4717 struct device_attribute *attr, char *buf)
4718{
4719 struct st_modedef *STm = dev_get_drvdata(dev);
4720
4721 return sprintf(buf, "%lld",
4722 (long long)atomic64_read(&STm->tape->stats->tot_read_time));
4723}
4724static DEVICE_ATTR_RO(read_ns);
4725
4726/**
4727 * write_cnt_show - write count - number of user calls
4728 * to write(2) that have written data to tape.
4729 * @dev: struct device
4730 * @attr: attribute structure
4731 * @buf: buffer to return formatted data in
4732 */
4733static ssize_t write_cnt_show(struct device *dev,
4734 struct device_attribute *attr, char *buf)
4735{
4736 struct st_modedef *STm = dev_get_drvdata(dev);
4737
4738 return sprintf(buf, "%lld",
4739 (long long)atomic64_read(&STm->tape->stats->write_cnt));
4740}
4741static DEVICE_ATTR_RO(write_cnt);
4742
4743/**
4744 * write_byte_cnt_show - write byte count - raw count of
4745 * bytes written to tape.
4746 * @dev: struct device
4747 * @attr: attribute structure
4748 * @buf: buffer to return formatted data in
4749 */
4750static ssize_t write_byte_cnt_show(struct device *dev,
4751 struct device_attribute *attr, char *buf)
4752{
4753 struct st_modedef *STm = dev_get_drvdata(dev);
4754
4755 return sprintf(buf, "%lld",
4756 (long long)atomic64_read(&STm->tape->stats->write_byte_cnt));
4757}
4758static DEVICE_ATTR_RO(write_byte_cnt);
4759
4760/**
4761 * write_ns_show - write ns - number of nanoseconds waiting on write
4762 * requests to complete.
4763 * @dev: struct device
4764 * @attr: attribute structure
4765 * @buf: buffer to return formatted data in
4766 */
4767static ssize_t write_ns_show(struct device *dev,
4768 struct device_attribute *attr, char *buf)
4769{
4770 struct st_modedef *STm = dev_get_drvdata(dev);
4771
4772 return sprintf(buf, "%lld",
4773 (long long)atomic64_read(&STm->tape->stats->tot_write_time));
4774}
4775static DEVICE_ATTR_RO(write_ns);
4776
4777/**
4778 * in_flight_show - number of I/Os currently in flight -
4779 * in most cases this will be either 0 or 1. It may be higher if someone
4780 * has also issued other SCSI commands such as via an ioctl.
4781 * @dev: struct device
4782 * @attr: attribute structure
4783 * @buf: buffer to return formatted data in
4784 */
4785static ssize_t in_flight_show(struct device *dev,
4786 struct device_attribute *attr, char *buf)
4787{
4788 struct st_modedef *STm = dev_get_drvdata(dev);
4789
4790 return sprintf(buf, "%lld",
4791 (long long)atomic64_read(&STm->tape->stats->in_flight));
4792}
4793static DEVICE_ATTR_RO(in_flight);
4794
4795/**
4796 * io_ns_show - io wait ns - this is the number of ns spent
4797 * waiting on all I/O to complete. This includes tape movement commands
4798 * such as rewinding, seeking to end of file or tape, it also includes
4799 * read and write. To determine the time spent on tape movement
4800 * subtract the read and write ns from this value.
4801 * @dev: struct device
4802 * @attr: attribute structure
4803 * @buf: buffer to return formatted data in
4804 */
4805static ssize_t io_ns_show(struct device *dev,
4806 struct device_attribute *attr, char *buf)
4807{
4808 struct st_modedef *STm = dev_get_drvdata(dev);
4809
4810 return sprintf(buf, "%lld",
4811 (long long)atomic64_read(&STm->tape->stats->tot_io_time));
4812}
4813static DEVICE_ATTR_RO(io_ns);
4814
4815/**
4816 * other_cnt_show - other io count - this is the number of
4817 * I/O requests other than read and write requests.
4818 * Typically these are tape movement requests but will include driver
4819 * tape movement. This includes only requests issued by the st driver.
4820 * @dev: struct device
4821 * @attr: attribute structure
4822 * @buf: buffer to return formatted data in
4823 */
4824static ssize_t other_cnt_show(struct device *dev,
4825 struct device_attribute *attr, char *buf)
4826{
4827 struct st_modedef *STm = dev_get_drvdata(dev);
4828
4829 return sprintf(buf, "%lld",
4830 (long long)atomic64_read(&STm->tape->stats->other_cnt));
4831}
4832static DEVICE_ATTR_RO(other_cnt);
4833
4834/**
4835 * resid_cnt_show - A count of the number of times we get a residual
4836 * count - this should indicate someone issuing reads larger than the
4837 * block size on tape.
4838 * @dev: struct device
4839 * @attr: attribute structure
4840 * @buf: buffer to return formatted data in
4841 */
4842static ssize_t resid_cnt_show(struct device *dev,
4843 struct device_attribute *attr, char *buf)
4844{
4845 struct st_modedef *STm = dev_get_drvdata(dev);
4846
4847 return sprintf(buf, "%lld",
4848 (long long)atomic64_read(&STm->tape->stats->resid_cnt));
4849}
4850static DEVICE_ATTR_RO(resid_cnt);
4851
4852static struct attribute *st_dev_attrs[] = {
4853 &dev_attr_defined.attr,
4854 &dev_attr_default_blksize.attr,
4855 &dev_attr_default_density.attr,
4856 &dev_attr_default_compression.attr,
4857 &dev_attr_options.attr,
4858 NULL,
4859};
4860
4861static struct attribute *st_stats_attrs[] = {
4862 &dev_attr_read_cnt.attr,
4863 &dev_attr_read_byte_cnt.attr,
4864 &dev_attr_read_ns.attr,
4865 &dev_attr_write_cnt.attr,
4866 &dev_attr_write_byte_cnt.attr,
4867 &dev_attr_write_ns.attr,
4868 &dev_attr_in_flight.attr,
4869 &dev_attr_io_ns.attr,
4870 &dev_attr_other_cnt.attr,
4871 &dev_attr_resid_cnt.attr,
4872 NULL,
4873};
4874
4875static struct attribute_group stats_group = {
4876 .name = "stats",
4877 .attrs = st_stats_attrs,
4878};
4879
4880static struct attribute_group st_group = {
4881 .attrs = st_dev_attrs,
4882};
4883
4884static const struct attribute_group *st_dev_groups[] = {
4885 &st_group,
4886 &stats_group,
4887 NULL,
4888};
4889
4890/* The following functions may be useful for a larger audience. */
4891static int sgl_map_user_pages(struct st_buffer *STbp,
4892 const unsigned int max_pages, unsigned long uaddr,
4893 size_t count, int rw)
4894{
4895 unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
4896 unsigned long start = uaddr >> PAGE_SHIFT;
4897 const int nr_pages = end - start;
4898 int res, i, j;
4899 struct page **pages;
4900 struct rq_map_data *mdata = &STbp->map_data;
4901
4902 /* User attempted Overflow! */
4903 if ((uaddr + count) < uaddr)
4904 return -EINVAL;
4905
4906 /* Too big */
4907 if (nr_pages > max_pages)
4908 return -ENOMEM;
4909
4910 /* Hmm? */
4911 if (count == 0)
4912 return 0;
4913
4914 if ((pages = kmalloc(max_pages * sizeof(*pages), GFP_KERNEL)) == NULL)
4915 return -ENOMEM;
4916
4917 /* Try to fault in all of the necessary pages */
4918 /* rw==READ means read from drive, write into memory area */
4919 res = get_user_pages_unlocked(
4920 uaddr,
4921 nr_pages,
4922 rw == READ,
4923 0, /* don't force */
4924 pages);
4925
4926 /* Errors and no page mapped should return here */
4927 if (res < nr_pages)
4928 goto out_unmap;
4929
4930 for (i=0; i < nr_pages; i++) {
4931 /* FIXME: flush superflous for rw==READ,
4932 * probably wrong function for rw==WRITE
4933 */
4934 flush_dcache_page(pages[i]);
4935 }
4936
4937 mdata->offset = uaddr & ~PAGE_MASK;
4938 STbp->mapped_pages = pages;
4939
4940 return nr_pages;
4941 out_unmap:
4942 if (res > 0) {
4943 for (j=0; j < res; j++)
4944 put_page(pages[j]);
4945 res = 0;
4946 }
4947 kfree(pages);
4948 return res;
4949}
4950
4951
4952/* And unmap them... */
4953static int sgl_unmap_user_pages(struct st_buffer *STbp,
4954 const unsigned int nr_pages, int dirtied)
4955{
4956 int i;
4957
4958 for (i=0; i < nr_pages; i++) {
4959 struct page *page = STbp->mapped_pages[i];
4960
4961 if (dirtied)
4962 SetPageDirty(page);
4963 /* FIXME: cache flush missing for rw==READ
4964 * FIXME: call the correct reference counting function
4965 */
4966 put_page(page);
4967 }
4968 kfree(STbp->mapped_pages);
4969 STbp->mapped_pages = NULL;
4970
4971 return 0;
4972}
1/*
2 SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
3 file Documentation/scsi/st.txt for more information.
4
5 History:
6 Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
7 Contribution and ideas from several people including (in alphabetical
8 order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk,
9 Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
10 Michael Schaefer, J"org Weule, and Eric Youngdale.
11
12 Copyright 1992 - 2010 Kai Makisara
13 email Kai.Makisara@kolumbus.fi
14
15 Some small formal changes - aeb, 950809
16
17 Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
18 */
19
20static const char *verstr = "20101219";
21
22#include <linux/module.h>
23
24#include <linux/fs.h>
25#include <linux/kernel.h>
26#include <linux/sched.h>
27#include <linux/mm.h>
28#include <linux/init.h>
29#include <linux/string.h>
30#include <linux/slab.h>
31#include <linux/errno.h>
32#include <linux/mtio.h>
33#include <linux/cdrom.h>
34#include <linux/ioctl.h>
35#include <linux/fcntl.h>
36#include <linux/spinlock.h>
37#include <linux/blkdev.h>
38#include <linux/moduleparam.h>
39#include <linux/cdev.h>
40#include <linux/delay.h>
41#include <linux/mutex.h>
42
43#include <asm/uaccess.h>
44#include <asm/dma.h>
45
46#include <scsi/scsi.h>
47#include <scsi/scsi_dbg.h>
48#include <scsi/scsi_device.h>
49#include <scsi/scsi_driver.h>
50#include <scsi/scsi_eh.h>
51#include <scsi/scsi_host.h>
52#include <scsi/scsi_ioctl.h>
53#include <scsi/sg.h>
54
55
56/* The driver prints some debugging information on the console if DEBUG
57 is defined and non-zero. */
58#define DEBUG 0
59
60#if DEBUG
61/* The message level for the debug messages is currently set to KERN_NOTICE
62 so that people can easily see the messages. Later when the debugging messages
63 in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
64#define ST_DEB_MSG KERN_NOTICE
65#define DEB(a) a
66#define DEBC(a) if (debugging) { a ; }
67#else
68#define DEB(a)
69#define DEBC(a)
70#endif
71
72#define ST_KILOBYTE 1024
73
74#include "st_options.h"
75#include "st.h"
76
77static DEFINE_MUTEX(st_mutex);
78static int buffer_kbs;
79static int max_sg_segs;
80static int try_direct_io = TRY_DIRECT_IO;
81static int try_rdio = 1;
82static int try_wdio = 1;
83
84static int st_dev_max;
85static int st_nr_dev;
86
87static struct class *st_sysfs_class;
88
89MODULE_AUTHOR("Kai Makisara");
90MODULE_DESCRIPTION("SCSI tape (st) driver");
91MODULE_LICENSE("GPL");
92MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
93MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
94
95/* Set 'perm' (4th argument) to 0 to disable module_param's definition
96 * of sysfs parameters (which module_param doesn't yet support).
97 * Sysfs parameters defined explicitly later.
98 */
99module_param_named(buffer_kbs, buffer_kbs, int, 0);
100MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)");
101module_param_named(max_sg_segs, max_sg_segs, int, 0);
102MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)");
103module_param_named(try_direct_io, try_direct_io, int, 0);
104MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)");
105
106/* Extra parameters for testing */
107module_param_named(try_rdio, try_rdio, int, 0);
108MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible");
109module_param_named(try_wdio, try_wdio, int, 0);
110MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible");
111
112#ifndef MODULE
113static int write_threshold_kbs; /* retained for compatibility */
114static struct st_dev_parm {
115 char *name;
116 int *val;
117} parms[] __initdata = {
118 {
119 "buffer_kbs", &buffer_kbs
120 },
121 { /* Retained for compatibility with 2.4 */
122 "write_threshold_kbs", &write_threshold_kbs
123 },
124 {
125 "max_sg_segs", NULL
126 },
127 {
128 "try_direct_io", &try_direct_io
129 }
130};
131#endif
132
133/* Restrict the number of modes so that names for all are assigned */
134#if ST_NBR_MODES > 16
135#error "Maximum number of modes is 16"
136#endif
137/* Bit reversed order to get same names for same minors with all
138 mode counts */
139static const char *st_formats[] = {
140 "", "r", "k", "s", "l", "t", "o", "u",
141 "m", "v", "p", "x", "a", "y", "q", "z"};
142
143/* The default definitions have been moved to st_options.h */
144
145#define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE)
146
147/* The buffer size should fit into the 24 bits for length in the
148 6-byte SCSI read and write commands. */
149#if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1)
150#error "Buffer size should not exceed (2 << 24 - 1) bytes!"
151#endif
152
153static int debugging = DEBUG;
154
155#define MAX_RETRIES 0
156#define MAX_WRITE_RETRIES 0
157#define MAX_READY_RETRIES 0
158#define NO_TAPE NOT_READY
159
160#define ST_TIMEOUT (900 * HZ)
161#define ST_LONG_TIMEOUT (14000 * HZ)
162
163/* Remove mode bits and auto-rewind bit (7) */
164#define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \
165 (iminor(x) & ~(-1 << ST_MODE_SHIFT)) )
166#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
167
168/* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */
169#define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \
170 (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) )
171
172/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
173 24 bits) */
174#define SET_DENS_AND_BLK 0x10001
175
176static DEFINE_RWLOCK(st_dev_arr_lock);
177
178static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE;
179static int st_max_sg_segs = ST_MAX_SG;
180
181static struct scsi_tape **scsi_tapes = NULL;
182
183static int modes_defined;
184
185static int enlarge_buffer(struct st_buffer *, int, int);
186static void clear_buffer(struct st_buffer *);
187static void normalize_buffer(struct st_buffer *);
188static int append_to_buffer(const char __user *, struct st_buffer *, int);
189static int from_buffer(struct st_buffer *, char __user *, int);
190static void move_buffer_data(struct st_buffer *, int);
191
192static int sgl_map_user_pages(struct st_buffer *, const unsigned int,
193 unsigned long, size_t, int);
194static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int);
195
196static int st_probe(struct device *);
197static int st_remove(struct device *);
198
199static int do_create_sysfs_files(void);
200static void do_remove_sysfs_files(void);
201static int do_create_class_files(struct scsi_tape *, int, int);
202
203static struct scsi_driver st_template = {
204 .owner = THIS_MODULE,
205 .gendrv = {
206 .name = "st",
207 .probe = st_probe,
208 .remove = st_remove,
209 },
210};
211
212static int st_compression(struct scsi_tape *, int);
213
214static int find_partition(struct scsi_tape *);
215static int switch_partition(struct scsi_tape *);
216
217static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long);
218
219static void scsi_tape_release(struct kref *);
220
221#define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref)
222
223static DEFINE_MUTEX(st_ref_mutex);
224
225
226#include "osst_detect.h"
227#ifndef SIGS_FROM_OSST
228#define SIGS_FROM_OSST \
229 {"OnStream", "SC-", "", "osst"}, \
230 {"OnStream", "DI-", "", "osst"}, \
231 {"OnStream", "DP-", "", "osst"}, \
232 {"OnStream", "USB", "", "osst"}, \
233 {"OnStream", "FW-", "", "osst"}
234#endif
235
236static struct scsi_tape *scsi_tape_get(int dev)
237{
238 struct scsi_tape *STp = NULL;
239
240 mutex_lock(&st_ref_mutex);
241 write_lock(&st_dev_arr_lock);
242
243 if (dev < st_dev_max && scsi_tapes != NULL)
244 STp = scsi_tapes[dev];
245 if (!STp) goto out;
246
247 kref_get(&STp->kref);
248
249 if (!STp->device)
250 goto out_put;
251
252 if (scsi_device_get(STp->device))
253 goto out_put;
254
255 goto out;
256
257out_put:
258 kref_put(&STp->kref, scsi_tape_release);
259 STp = NULL;
260out:
261 write_unlock(&st_dev_arr_lock);
262 mutex_unlock(&st_ref_mutex);
263 return STp;
264}
265
266static void scsi_tape_put(struct scsi_tape *STp)
267{
268 struct scsi_device *sdev = STp->device;
269
270 mutex_lock(&st_ref_mutex);
271 kref_put(&STp->kref, scsi_tape_release);
272 scsi_device_put(sdev);
273 mutex_unlock(&st_ref_mutex);
274}
275
276struct st_reject_data {
277 char *vendor;
278 char *model;
279 char *rev;
280 char *driver_hint; /* Name of the correct driver, NULL if unknown */
281};
282
283static struct st_reject_data reject_list[] = {
284 /* {"XXX", "Yy-", "", NULL}, example */
285 SIGS_FROM_OSST,
286 {NULL, }};
287
288/* If the device signature is on the list of incompatible drives, the
289 function returns a pointer to the name of the correct driver (if known) */
290static char * st_incompatible(struct scsi_device* SDp)
291{
292 struct st_reject_data *rp;
293
294 for (rp=&(reject_list[0]); rp->vendor != NULL; rp++)
295 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
296 !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
297 !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) {
298 if (rp->driver_hint)
299 return rp->driver_hint;
300 else
301 return "unknown";
302 }
303 return NULL;
304}
305
306
307static inline char *tape_name(struct scsi_tape *tape)
308{
309 return tape->disk->disk_name;
310}
311
312
313static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s)
314{
315 const u8 *ucp;
316 const u8 *sense = SRpnt->sense;
317
318 s->have_sense = scsi_normalize_sense(SRpnt->sense,
319 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
320 s->flags = 0;
321
322 if (s->have_sense) {
323 s->deferred = 0;
324 s->remainder_valid =
325 scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
326 switch (sense[0] & 0x7f) {
327 case 0x71:
328 s->deferred = 1;
329 case 0x70:
330 s->fixed_format = 1;
331 s->flags = sense[2] & 0xe0;
332 break;
333 case 0x73:
334 s->deferred = 1;
335 case 0x72:
336 s->fixed_format = 0;
337 ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
338 s->flags = ucp ? (ucp[3] & 0xe0) : 0;
339 break;
340 }
341 }
342}
343
344
345/* Convert the result to success code */
346static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
347{
348 int result = SRpnt->result;
349 u8 scode;
350 DEB(const char *stp;)
351 char *name = tape_name(STp);
352 struct st_cmdstatus *cmdstatp;
353
354 if (!result)
355 return 0;
356
357 cmdstatp = &STp->buffer->cmdstat;
358 st_analyze_sense(SRpnt, cmdstatp);
359
360 if (cmdstatp->have_sense)
361 scode = STp->buffer->cmdstat.sense_hdr.sense_key;
362 else
363 scode = 0;
364
365 DEB(
366 if (debugging) {
367 printk(ST_DEB_MSG "%s: Error: %x, cmd: %x %x %x %x %x %x\n",
368 name, result,
369 SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
370 SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
371 if (cmdstatp->have_sense)
372 __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
373 } ) /* end DEB */
374 if (!debugging) { /* Abnormal conditions for tape */
375 if (!cmdstatp->have_sense)
376 printk(KERN_WARNING
377 "%s: Error %x (driver bt 0x%x, host bt 0x%x).\n",
378 name, result, driver_byte(result),
379 host_byte(result));
380 else if (cmdstatp->have_sense &&
381 scode != NO_SENSE &&
382 scode != RECOVERED_ERROR &&
383 /* scode != UNIT_ATTENTION && */
384 scode != BLANK_CHECK &&
385 scode != VOLUME_OVERFLOW &&
386 SRpnt->cmd[0] != MODE_SENSE &&
387 SRpnt->cmd[0] != TEST_UNIT_READY) {
388
389 __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
390 }
391 }
392
393 if (cmdstatp->fixed_format &&
394 STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */
395 if (STp->cln_sense_value)
396 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
397 STp->cln_sense_mask) == STp->cln_sense_value);
398 else
399 STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
400 STp->cln_sense_mask) != 0);
401 }
402 if (cmdstatp->have_sense &&
403 cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17)
404 STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */
405
406 STp->pos_unknown |= STp->device->was_reset;
407
408 if (cmdstatp->have_sense &&
409 scode == RECOVERED_ERROR
410#if ST_RECOVERED_WRITE_FATAL
411 && SRpnt->cmd[0] != WRITE_6
412 && SRpnt->cmd[0] != WRITE_FILEMARKS
413#endif
414 ) {
415 STp->recover_count++;
416 STp->recover_reg++;
417
418 DEB(
419 if (debugging) {
420 if (SRpnt->cmd[0] == READ_6)
421 stp = "read";
422 else if (SRpnt->cmd[0] == WRITE_6)
423 stp = "write";
424 else
425 stp = "ioctl";
426 printk(ST_DEB_MSG "%s: Recovered %s error (%d).\n", name, stp,
427 STp->recover_count);
428 } ) /* end DEB */
429
430 if (cmdstatp->flags == 0)
431 return 0;
432 }
433 return (-EIO);
434}
435
436static struct st_request *st_allocate_request(struct scsi_tape *stp)
437{
438 struct st_request *streq;
439
440 streq = kzalloc(sizeof(*streq), GFP_KERNEL);
441 if (streq)
442 streq->stp = stp;
443 else {
444 DEBC(printk(KERN_ERR "%s: Can't get SCSI request.\n",
445 tape_name(stp)););
446 if (signal_pending(current))
447 stp->buffer->syscall_result = -EINTR;
448 else
449 stp->buffer->syscall_result = -EBUSY;
450 }
451
452 return streq;
453}
454
455static void st_release_request(struct st_request *streq)
456{
457 kfree(streq);
458}
459
460static void st_scsi_execute_end(struct request *req, int uptodate)
461{
462 struct st_request *SRpnt = req->end_io_data;
463 struct scsi_tape *STp = SRpnt->stp;
464 struct bio *tmp;
465
466 STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
467 STp->buffer->cmdstat.residual = req->resid_len;
468
469 tmp = SRpnt->bio;
470 if (SRpnt->waiting)
471 complete(SRpnt->waiting);
472
473 blk_rq_unmap_user(tmp);
474 __blk_put_request(req->q, req);
475}
476
477static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd,
478 int data_direction, void *buffer, unsigned bufflen,
479 int timeout, int retries)
480{
481 struct request *req;
482 struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
483 int err = 0;
484 int write = (data_direction == DMA_TO_DEVICE);
485
486 req = blk_get_request(SRpnt->stp->device->request_queue, write,
487 GFP_KERNEL);
488 if (!req)
489 return DRIVER_ERROR << 24;
490
491 req->cmd_type = REQ_TYPE_BLOCK_PC;
492 req->cmd_flags |= REQ_QUIET;
493
494 mdata->null_mapped = 1;
495
496 if (bufflen) {
497 err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen,
498 GFP_KERNEL);
499 if (err) {
500 blk_put_request(req);
501 return DRIVER_ERROR << 24;
502 }
503 }
504
505 SRpnt->bio = req->bio;
506 req->cmd_len = COMMAND_SIZE(cmd[0]);
507 memset(req->cmd, 0, BLK_MAX_CDB);
508 memcpy(req->cmd, cmd, req->cmd_len);
509 req->sense = SRpnt->sense;
510 req->sense_len = 0;
511 req->timeout = timeout;
512 req->retries = retries;
513 req->end_io_data = SRpnt;
514
515 blk_execute_rq_nowait(req->q, NULL, req, 1, st_scsi_execute_end);
516 return 0;
517}
518
519/* Do the scsi command. Waits until command performed if do_wait is true.
520 Otherwise write_behind_check() is used to check that the command
521 has finished. */
522static struct st_request *
523st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd,
524 int bytes, int direction, int timeout, int retries, int do_wait)
525{
526 struct completion *waiting;
527 struct rq_map_data *mdata = &STp->buffer->map_data;
528 int ret;
529
530 /* if async, make sure there's no command outstanding */
531 if (!do_wait && ((STp->buffer)->last_SRpnt)) {
532 printk(KERN_ERR "%s: Async command already active.\n",
533 tape_name(STp));
534 if (signal_pending(current))
535 (STp->buffer)->syscall_result = (-EINTR);
536 else
537 (STp->buffer)->syscall_result = (-EBUSY);
538 return NULL;
539 }
540
541 if (!SRpnt) {
542 SRpnt = st_allocate_request(STp);
543 if (!SRpnt)
544 return NULL;
545 }
546
547 /* If async IO, set last_SRpnt. This ptr tells write_behind_check
548 which IO is outstanding. It's nulled out when the IO completes. */
549 if (!do_wait)
550 (STp->buffer)->last_SRpnt = SRpnt;
551
552 waiting = &STp->wait;
553 init_completion(waiting);
554 SRpnt->waiting = waiting;
555
556 if (STp->buffer->do_dio) {
557 mdata->page_order = 0;
558 mdata->nr_entries = STp->buffer->sg_segs;
559 mdata->pages = STp->buffer->mapped_pages;
560 } else {
561 mdata->page_order = STp->buffer->reserved_page_order;
562 mdata->nr_entries =
563 DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order);
564 mdata->pages = STp->buffer->reserved_pages;
565 mdata->offset = 0;
566 }
567
568 memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
569 STp->buffer->cmdstat.have_sense = 0;
570 STp->buffer->syscall_result = 0;
571
572 ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout,
573 retries);
574 if (ret) {
575 /* could not allocate the buffer or request was too large */
576 (STp->buffer)->syscall_result = (-EBUSY);
577 (STp->buffer)->last_SRpnt = NULL;
578 } else if (do_wait) {
579 wait_for_completion(waiting);
580 SRpnt->waiting = NULL;
581 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
582 }
583
584 return SRpnt;
585}
586
587
588/* Handle the write-behind checking (waits for completion). Returns -ENOSPC if
589 write has been correct but EOM early warning reached, -EIO if write ended in
590 error or zero if write successful. Asynchronous writes are used only in
591 variable block mode. */
592static int write_behind_check(struct scsi_tape * STp)
593{
594 int retval = 0;
595 struct st_buffer *STbuffer;
596 struct st_partstat *STps;
597 struct st_cmdstatus *cmdstatp;
598 struct st_request *SRpnt;
599
600 STbuffer = STp->buffer;
601 if (!STbuffer->writing)
602 return 0;
603
604 DEB(
605 if (STp->write_pending)
606 STp->nbr_waits++;
607 else
608 STp->nbr_finished++;
609 ) /* end DEB */
610
611 wait_for_completion(&(STp->wait));
612 SRpnt = STbuffer->last_SRpnt;
613 STbuffer->last_SRpnt = NULL;
614 SRpnt->waiting = NULL;
615
616 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
617 st_release_request(SRpnt);
618
619 STbuffer->buffer_bytes -= STbuffer->writing;
620 STps = &(STp->ps[STp->partition]);
621 if (STps->drv_block >= 0) {
622 if (STp->block_size == 0)
623 STps->drv_block++;
624 else
625 STps->drv_block += STbuffer->writing / STp->block_size;
626 }
627
628 cmdstatp = &STbuffer->cmdstat;
629 if (STbuffer->syscall_result) {
630 retval = -EIO;
631 if (cmdstatp->have_sense && !cmdstatp->deferred &&
632 (cmdstatp->flags & SENSE_EOM) &&
633 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
634 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) {
635 /* EOM at write-behind, has all data been written? */
636 if (!cmdstatp->remainder_valid ||
637 cmdstatp->uremainder64 == 0)
638 retval = -ENOSPC;
639 }
640 if (retval == -EIO)
641 STps->drv_block = -1;
642 }
643 STbuffer->writing = 0;
644
645 DEB(if (debugging && retval)
646 printk(ST_DEB_MSG "%s: Async write error %x, return value %d.\n",
647 tape_name(STp), STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */
648
649 return retval;
650}
651
652
653/* Step over EOF if it has been inadvertently crossed (ioctl not used because
654 it messes up the block number). */
655static int cross_eof(struct scsi_tape * STp, int forward)
656{
657 struct st_request *SRpnt;
658 unsigned char cmd[MAX_COMMAND_SIZE];
659
660 cmd[0] = SPACE;
661 cmd[1] = 0x01; /* Space FileMarks */
662 if (forward) {
663 cmd[2] = cmd[3] = 0;
664 cmd[4] = 1;
665 } else
666 cmd[2] = cmd[3] = cmd[4] = 0xff; /* -1 filemarks */
667 cmd[5] = 0;
668
669 DEBC(printk(ST_DEB_MSG "%s: Stepping over filemark %s.\n",
670 tape_name(STp), forward ? "forward" : "backward"));
671
672 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
673 STp->device->request_queue->rq_timeout,
674 MAX_RETRIES, 1);
675 if (!SRpnt)
676 return (STp->buffer)->syscall_result;
677
678 st_release_request(SRpnt);
679 SRpnt = NULL;
680
681 if ((STp->buffer)->cmdstat.midlevel_result != 0)
682 printk(KERN_ERR "%s: Stepping over filemark %s failed.\n",
683 tape_name(STp), forward ? "forward" : "backward");
684
685 return (STp->buffer)->syscall_result;
686}
687
688
689/* Flush the write buffer (never need to write if variable blocksize). */
690static int st_flush_write_buffer(struct scsi_tape * STp)
691{
692 int transfer, blks;
693 int result;
694 unsigned char cmd[MAX_COMMAND_SIZE];
695 struct st_request *SRpnt;
696 struct st_partstat *STps;
697
698 result = write_behind_check(STp);
699 if (result)
700 return result;
701
702 result = 0;
703 if (STp->dirty == 1) {
704
705 transfer = STp->buffer->buffer_bytes;
706 DEBC(printk(ST_DEB_MSG "%s: Flushing %d bytes.\n",
707 tape_name(STp), transfer));
708
709 memset(cmd, 0, MAX_COMMAND_SIZE);
710 cmd[0] = WRITE_6;
711 cmd[1] = 1;
712 blks = transfer / STp->block_size;
713 cmd[2] = blks >> 16;
714 cmd[3] = blks >> 8;
715 cmd[4] = blks;
716
717 SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE,
718 STp->device->request_queue->rq_timeout,
719 MAX_WRITE_RETRIES, 1);
720 if (!SRpnt)
721 return (STp->buffer)->syscall_result;
722
723 STps = &(STp->ps[STp->partition]);
724 if ((STp->buffer)->syscall_result != 0) {
725 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
726
727 if (cmdstatp->have_sense && !cmdstatp->deferred &&
728 (cmdstatp->flags & SENSE_EOM) &&
729 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
730 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
731 (!cmdstatp->remainder_valid ||
732 cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */
733 STp->dirty = 0;
734 (STp->buffer)->buffer_bytes = 0;
735 if (STps->drv_block >= 0)
736 STps->drv_block += blks;
737 result = (-ENOSPC);
738 } else {
739 printk(KERN_ERR "%s: Error on flush.\n",
740 tape_name(STp));
741 STps->drv_block = (-1);
742 result = (-EIO);
743 }
744 } else {
745 if (STps->drv_block >= 0)
746 STps->drv_block += blks;
747 STp->dirty = 0;
748 (STp->buffer)->buffer_bytes = 0;
749 }
750 st_release_request(SRpnt);
751 SRpnt = NULL;
752 }
753 return result;
754}
755
756
757/* Flush the tape buffer. The tape will be positioned correctly unless
758 seek_next is true. */
759static int flush_buffer(struct scsi_tape *STp, int seek_next)
760{
761 int backspace, result;
762 struct st_buffer *STbuffer;
763 struct st_partstat *STps;
764
765 STbuffer = STp->buffer;
766
767 /*
768 * If there was a bus reset, block further access
769 * to this device.
770 */
771 if (STp->pos_unknown)
772 return (-EIO);
773
774 if (STp->ready != ST_READY)
775 return 0;
776 STps = &(STp->ps[STp->partition]);
777 if (STps->rw == ST_WRITING) /* Writing */
778 return st_flush_write_buffer(STp);
779
780 if (STp->block_size == 0)
781 return 0;
782
783 backspace = ((STp->buffer)->buffer_bytes +
784 (STp->buffer)->read_pointer) / STp->block_size -
785 ((STp->buffer)->read_pointer + STp->block_size - 1) /
786 STp->block_size;
787 (STp->buffer)->buffer_bytes = 0;
788 (STp->buffer)->read_pointer = 0;
789 result = 0;
790 if (!seek_next) {
791 if (STps->eof == ST_FM_HIT) {
792 result = cross_eof(STp, 0); /* Back over the EOF hit */
793 if (!result)
794 STps->eof = ST_NOEOF;
795 else {
796 if (STps->drv_file >= 0)
797 STps->drv_file++;
798 STps->drv_block = 0;
799 }
800 }
801 if (!result && backspace > 0)
802 result = st_int_ioctl(STp, MTBSR, backspace);
803 } else if (STps->eof == ST_FM_HIT) {
804 if (STps->drv_file >= 0)
805 STps->drv_file++;
806 STps->drv_block = 0;
807 STps->eof = ST_NOEOF;
808 }
809 return result;
810
811}
812
813/* Set the mode parameters */
814static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm)
815{
816 int set_it = 0;
817 unsigned long arg;
818 char *name = tape_name(STp);
819
820 if (!STp->density_changed &&
821 STm->default_density >= 0 &&
822 STm->default_density != STp->density) {
823 arg = STm->default_density;
824 set_it = 1;
825 } else
826 arg = STp->density;
827 arg <<= MT_ST_DENSITY_SHIFT;
828 if (!STp->blksize_changed &&
829 STm->default_blksize >= 0 &&
830 STm->default_blksize != STp->block_size) {
831 arg |= STm->default_blksize;
832 set_it = 1;
833 } else
834 arg |= STp->block_size;
835 if (set_it &&
836 st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) {
837 printk(KERN_WARNING
838 "%s: Can't set default block size to %d bytes and density %x.\n",
839 name, STm->default_blksize, STm->default_density);
840 if (modes_defined)
841 return (-EINVAL);
842 }
843 return 0;
844}
845
846
847/* Lock or unlock the drive door. Don't use when st_request allocated. */
848static int do_door_lock(struct scsi_tape * STp, int do_lock)
849{
850 int retval, cmd;
851 DEB(char *name = tape_name(STp);)
852
853
854 cmd = do_lock ? SCSI_IOCTL_DOORLOCK : SCSI_IOCTL_DOORUNLOCK;
855 DEBC(printk(ST_DEB_MSG "%s: %socking drive door.\n", name,
856 do_lock ? "L" : "Unl"));
857 retval = scsi_ioctl(STp->device, cmd, NULL);
858 if (!retval) {
859 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
860 }
861 else {
862 STp->door_locked = ST_LOCK_FAILS;
863 }
864 return retval;
865}
866
867
868/* Set the internal state after reset */
869static void reset_state(struct scsi_tape *STp)
870{
871 int i;
872 struct st_partstat *STps;
873
874 STp->pos_unknown = 0;
875 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
876 STps = &(STp->ps[i]);
877 STps->rw = ST_IDLE;
878 STps->eof = ST_NOEOF;
879 STps->at_sm = 0;
880 STps->last_block_valid = 0;
881 STps->drv_block = -1;
882 STps->drv_file = -1;
883 }
884 if (STp->can_partitions) {
885 STp->partition = find_partition(STp);
886 if (STp->partition < 0)
887 STp->partition = 0;
888 STp->new_partition = STp->partition;
889 }
890}
891
892/* Test if the drive is ready. Returns either one of the codes below or a negative system
893 error code. */
894#define CHKRES_READY 0
895#define CHKRES_NEW_SESSION 1
896#define CHKRES_NOT_READY 2
897#define CHKRES_NO_TAPE 3
898
899#define MAX_ATTENTIONS 10
900
901static int test_ready(struct scsi_tape *STp, int do_wait)
902{
903 int attentions, waits, max_wait, scode;
904 int retval = CHKRES_READY, new_session = 0;
905 unsigned char cmd[MAX_COMMAND_SIZE];
906 struct st_request *SRpnt = NULL;
907 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
908
909 max_wait = do_wait ? ST_BLOCK_SECONDS : 0;
910
911 for (attentions=waits=0; ; ) {
912 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
913 cmd[0] = TEST_UNIT_READY;
914 SRpnt = st_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
915 STp->long_timeout, MAX_READY_RETRIES, 1);
916
917 if (!SRpnt) {
918 retval = (STp->buffer)->syscall_result;
919 break;
920 }
921
922 if (cmdstatp->have_sense) {
923
924 scode = cmdstatp->sense_hdr.sense_key;
925
926 if (scode == UNIT_ATTENTION) { /* New media? */
927 new_session = 1;
928 if (attentions < MAX_ATTENTIONS) {
929 attentions++;
930 continue;
931 }
932 else {
933 retval = (-EIO);
934 break;
935 }
936 }
937
938 if (scode == NOT_READY) {
939 if (waits < max_wait) {
940 if (msleep_interruptible(1000)) {
941 retval = (-EINTR);
942 break;
943 }
944 waits++;
945 continue;
946 }
947 else {
948 if ((STp->device)->scsi_level >= SCSI_2 &&
949 cmdstatp->sense_hdr.asc == 0x3a) /* Check ASC */
950 retval = CHKRES_NO_TAPE;
951 else
952 retval = CHKRES_NOT_READY;
953 break;
954 }
955 }
956 }
957
958 retval = (STp->buffer)->syscall_result;
959 if (!retval)
960 retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY;
961 break;
962 }
963
964 if (SRpnt != NULL)
965 st_release_request(SRpnt);
966 return retval;
967}
968
969
970/* See if the drive is ready and gather information about the tape. Return values:
971 < 0 negative error code from errno.h
972 0 drive ready
973 1 drive not ready (possibly no tape)
974*/
975static int check_tape(struct scsi_tape *STp, struct file *filp)
976{
977 int i, retval, new_session = 0, do_wait;
978 unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning;
979 unsigned short st_flags = filp->f_flags;
980 struct st_request *SRpnt = NULL;
981 struct st_modedef *STm;
982 struct st_partstat *STps;
983 char *name = tape_name(STp);
984 struct inode *inode = filp->f_path.dentry->d_inode;
985 int mode = TAPE_MODE(inode);
986
987 STp->ready = ST_READY;
988
989 if (mode != STp->current_mode) {
990 DEBC(printk(ST_DEB_MSG "%s: Mode change from %d to %d.\n",
991 name, STp->current_mode, mode));
992 new_session = 1;
993 STp->current_mode = mode;
994 }
995 STm = &(STp->modes[STp->current_mode]);
996
997 saved_cleaning = STp->cleaning_req;
998 STp->cleaning_req = 0;
999
1000 do_wait = ((filp->f_flags & O_NONBLOCK) == 0);
1001 retval = test_ready(STp, do_wait);
1002
1003 if (retval < 0)
1004 goto err_out;
1005
1006 if (retval == CHKRES_NEW_SESSION) {
1007 STp->pos_unknown = 0;
1008 STp->partition = STp->new_partition = 0;
1009 if (STp->can_partitions)
1010 STp->nbr_partitions = 1; /* This guess will be updated later
1011 if necessary */
1012 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1013 STps = &(STp->ps[i]);
1014 STps->rw = ST_IDLE;
1015 STps->eof = ST_NOEOF;
1016 STps->at_sm = 0;
1017 STps->last_block_valid = 0;
1018 STps->drv_block = 0;
1019 STps->drv_file = 0;
1020 }
1021 new_session = 1;
1022 }
1023 else {
1024 STp->cleaning_req |= saved_cleaning;
1025
1026 if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) {
1027 if (retval == CHKRES_NO_TAPE)
1028 STp->ready = ST_NO_TAPE;
1029 else
1030 STp->ready = ST_NOT_READY;
1031
1032 STp->density = 0; /* Clear the erroneous "residue" */
1033 STp->write_prot = 0;
1034 STp->block_size = 0;
1035 STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
1036 STp->partition = STp->new_partition = 0;
1037 STp->door_locked = ST_UNLOCKED;
1038 return CHKRES_NOT_READY;
1039 }
1040 }
1041
1042 if (STp->omit_blklims)
1043 STp->min_block = STp->max_block = (-1);
1044 else {
1045 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1046 cmd[0] = READ_BLOCK_LIMITS;
1047
1048 SRpnt = st_do_scsi(SRpnt, STp, cmd, 6, DMA_FROM_DEVICE,
1049 STp->device->request_queue->rq_timeout,
1050 MAX_READY_RETRIES, 1);
1051 if (!SRpnt) {
1052 retval = (STp->buffer)->syscall_result;
1053 goto err_out;
1054 }
1055
1056 if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) {
1057 STp->max_block = ((STp->buffer)->b_data[1] << 16) |
1058 ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3];
1059 STp->min_block = ((STp->buffer)->b_data[4] << 8) |
1060 (STp->buffer)->b_data[5];
1061 if ( DEB( debugging || ) !STp->inited)
1062 printk(KERN_INFO
1063 "%s: Block limits %d - %d bytes.\n", name,
1064 STp->min_block, STp->max_block);
1065 } else {
1066 STp->min_block = STp->max_block = (-1);
1067 DEBC(printk(ST_DEB_MSG "%s: Can't read block limits.\n",
1068 name));
1069 }
1070 }
1071
1072 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1073 cmd[0] = MODE_SENSE;
1074 cmd[4] = 12;
1075
1076 SRpnt = st_do_scsi(SRpnt, STp, cmd, 12, DMA_FROM_DEVICE,
1077 STp->device->request_queue->rq_timeout,
1078 MAX_READY_RETRIES, 1);
1079 if (!SRpnt) {
1080 retval = (STp->buffer)->syscall_result;
1081 goto err_out;
1082 }
1083
1084 if ((STp->buffer)->syscall_result != 0) {
1085 DEBC(printk(ST_DEB_MSG "%s: No Mode Sense.\n", name));
1086 STp->block_size = ST_DEFAULT_BLOCK; /* Educated guess (?) */
1087 (STp->buffer)->syscall_result = 0; /* Prevent error propagation */
1088 STp->drv_write_prot = 0;
1089 } else {
1090 DEBC(printk(ST_DEB_MSG
1091 "%s: Mode sense. Length %d, medium %x, WBS %x, BLL %d\n",
1092 name,
1093 (STp->buffer)->b_data[0], (STp->buffer)->b_data[1],
1094 (STp->buffer)->b_data[2], (STp->buffer)->b_data[3]));
1095
1096 if ((STp->buffer)->b_data[3] >= 8) {
1097 STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7;
1098 STp->density = (STp->buffer)->b_data[4];
1099 STp->block_size = (STp->buffer)->b_data[9] * 65536 +
1100 (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11];
1101 DEBC(printk(ST_DEB_MSG
1102 "%s: Density %x, tape length: %x, drv buffer: %d\n",
1103 name, STp->density, (STp->buffer)->b_data[5] * 65536 +
1104 (STp->buffer)->b_data[6] * 256 + (STp->buffer)->b_data[7],
1105 STp->drv_buffer));
1106 }
1107 STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0;
1108 if (!STp->drv_buffer && STp->immediate_filemark) {
1109 printk(KERN_WARNING
1110 "%s: non-buffered tape: disabling writing immediate filemarks\n",
1111 name);
1112 STp->immediate_filemark = 0;
1113 }
1114 }
1115 st_release_request(SRpnt);
1116 SRpnt = NULL;
1117 STp->inited = 1;
1118
1119 if (STp->block_size > 0)
1120 (STp->buffer)->buffer_blocks =
1121 (STp->buffer)->buffer_size / STp->block_size;
1122 else
1123 (STp->buffer)->buffer_blocks = 1;
1124 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
1125
1126 DEBC(printk(ST_DEB_MSG
1127 "%s: Block size: %d, buffer size: %d (%d blocks).\n", name,
1128 STp->block_size, (STp->buffer)->buffer_size,
1129 (STp->buffer)->buffer_blocks));
1130
1131 if (STp->drv_write_prot) {
1132 STp->write_prot = 1;
1133
1134 DEBC(printk(ST_DEB_MSG "%s: Write protected\n", name));
1135
1136 if (do_wait &&
1137 ((st_flags & O_ACCMODE) == O_WRONLY ||
1138 (st_flags & O_ACCMODE) == O_RDWR)) {
1139 retval = (-EROFS);
1140 goto err_out;
1141 }
1142 }
1143
1144 if (STp->can_partitions && STp->nbr_partitions < 1) {
1145 /* This code is reached when the device is opened for the first time
1146 after the driver has been initialized with tape in the drive and the
1147 partition support has been enabled. */
1148 DEBC(printk(ST_DEB_MSG
1149 "%s: Updating partition number in status.\n", name));
1150 if ((STp->partition = find_partition(STp)) < 0) {
1151 retval = STp->partition;
1152 goto err_out;
1153 }
1154 STp->new_partition = STp->partition;
1155 STp->nbr_partitions = 1; /* This guess will be updated when necessary */
1156 }
1157
1158 if (new_session) { /* Change the drive parameters for the new mode */
1159 STp->density_changed = STp->blksize_changed = 0;
1160 STp->compression_changed = 0;
1161 if (!(STm->defaults_for_writes) &&
1162 (retval = set_mode_densblk(STp, STm)) < 0)
1163 goto err_out;
1164
1165 if (STp->default_drvbuffer != 0xff) {
1166 if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer))
1167 printk(KERN_WARNING
1168 "%s: Can't set default drive buffering to %d.\n",
1169 name, STp->default_drvbuffer);
1170 }
1171 }
1172
1173 return CHKRES_READY;
1174
1175 err_out:
1176 return retval;
1177}
1178
1179
1180 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host
1181 module count. */
1182static int st_open(struct inode *inode, struct file *filp)
1183{
1184 int i, retval = (-EIO);
1185 int resumed = 0;
1186 struct scsi_tape *STp;
1187 struct st_partstat *STps;
1188 int dev = TAPE_NR(inode);
1189 char *name;
1190
1191 mutex_lock(&st_mutex);
1192 /*
1193 * We really want to do nonseekable_open(inode, filp); here, but some
1194 * versions of tar incorrectly call lseek on tapes and bail out if that
1195 * fails. So we disallow pread() and pwrite(), but permit lseeks.
1196 */
1197 filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
1198
1199 if (!(STp = scsi_tape_get(dev))) {
1200 mutex_unlock(&st_mutex);
1201 return -ENXIO;
1202 }
1203
1204 write_lock(&st_dev_arr_lock);
1205 filp->private_data = STp;
1206 name = tape_name(STp);
1207
1208 if (STp->in_use) {
1209 write_unlock(&st_dev_arr_lock);
1210 scsi_tape_put(STp);
1211 mutex_unlock(&st_mutex);
1212 DEB( printk(ST_DEB_MSG "%s: Device already in use.\n", name); )
1213 return (-EBUSY);
1214 }
1215
1216 STp->in_use = 1;
1217 write_unlock(&st_dev_arr_lock);
1218 STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0;
1219
1220 if (scsi_autopm_get_device(STp->device) < 0) {
1221 retval = -EIO;
1222 goto err_out;
1223 }
1224 resumed = 1;
1225 if (!scsi_block_when_processing_errors(STp->device)) {
1226 retval = (-ENXIO);
1227 goto err_out;
1228 }
1229
1230 /* See that we have at least a one page buffer available */
1231 if (!enlarge_buffer(STp->buffer, PAGE_SIZE, STp->restr_dma)) {
1232 printk(KERN_WARNING "%s: Can't allocate one page tape buffer.\n",
1233 name);
1234 retval = (-EOVERFLOW);
1235 goto err_out;
1236 }
1237
1238 (STp->buffer)->cleared = 0;
1239 (STp->buffer)->writing = 0;
1240 (STp->buffer)->syscall_result = 0;
1241
1242 STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY);
1243
1244 STp->dirty = 0;
1245 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1246 STps = &(STp->ps[i]);
1247 STps->rw = ST_IDLE;
1248 }
1249 STp->try_dio_now = STp->try_dio;
1250 STp->recover_count = 0;
1251 DEB( STp->nbr_waits = STp->nbr_finished = 0;
1252 STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; )
1253
1254 retval = check_tape(STp, filp);
1255 if (retval < 0)
1256 goto err_out;
1257 if ((filp->f_flags & O_NONBLOCK) == 0 &&
1258 retval != CHKRES_READY) {
1259 if (STp->ready == NO_TAPE)
1260 retval = (-ENOMEDIUM);
1261 else
1262 retval = (-EIO);
1263 goto err_out;
1264 }
1265 mutex_unlock(&st_mutex);
1266 return 0;
1267
1268 err_out:
1269 normalize_buffer(STp->buffer);
1270 STp->in_use = 0;
1271 scsi_tape_put(STp);
1272 if (resumed)
1273 scsi_autopm_put_device(STp->device);
1274 mutex_unlock(&st_mutex);
1275 return retval;
1276
1277}
1278
1279
1280/* Flush the tape buffer before close */
1281static int st_flush(struct file *filp, fl_owner_t id)
1282{
1283 int result = 0, result2;
1284 unsigned char cmd[MAX_COMMAND_SIZE];
1285 struct st_request *SRpnt;
1286 struct scsi_tape *STp = filp->private_data;
1287 struct st_modedef *STm = &(STp->modes[STp->current_mode]);
1288 struct st_partstat *STps = &(STp->ps[STp->partition]);
1289 char *name = tape_name(STp);
1290
1291 if (file_count(filp) > 1)
1292 return 0;
1293
1294 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1295 result = st_flush_write_buffer(STp);
1296 if (result != 0 && result != (-ENOSPC))
1297 goto out;
1298 }
1299
1300 if (STp->can_partitions &&
1301 (result2 = switch_partition(STp)) < 0) {
1302 DEBC(printk(ST_DEB_MSG
1303 "%s: switch_partition at close failed.\n", name));
1304 if (result == 0)
1305 result = result2;
1306 goto out;
1307 }
1308
1309 DEBC( if (STp->nbr_requests)
1310 printk(KERN_DEBUG "%s: Number of r/w requests %d, dio used in %d, pages %d.\n",
1311 name, STp->nbr_requests, STp->nbr_dio, STp->nbr_pages));
1312
1313 if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1314 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1315
1316 DEBC(printk(ST_DEB_MSG "%s: Async write waits %d, finished %d.\n",
1317 name, STp->nbr_waits, STp->nbr_finished);
1318 )
1319
1320 memset(cmd, 0, MAX_COMMAND_SIZE);
1321 cmd[0] = WRITE_FILEMARKS;
1322 if (STp->immediate_filemark)
1323 cmd[1] = 1;
1324 cmd[4] = 1 + STp->two_fm;
1325
1326 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
1327 STp->device->request_queue->rq_timeout,
1328 MAX_WRITE_RETRIES, 1);
1329 if (!SRpnt) {
1330 result = (STp->buffer)->syscall_result;
1331 goto out;
1332 }
1333
1334 if (STp->buffer->syscall_result == 0 ||
1335 (cmdstatp->have_sense && !cmdstatp->deferred &&
1336 (cmdstatp->flags & SENSE_EOM) &&
1337 (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
1338 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
1339 (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) {
1340 /* Write successful at EOM */
1341 st_release_request(SRpnt);
1342 SRpnt = NULL;
1343 if (STps->drv_file >= 0)
1344 STps->drv_file++;
1345 STps->drv_block = 0;
1346 if (STp->two_fm)
1347 cross_eof(STp, 0);
1348 STps->eof = ST_FM;
1349 }
1350 else { /* Write error */
1351 st_release_request(SRpnt);
1352 SRpnt = NULL;
1353 printk(KERN_ERR "%s: Error on write filemark.\n", name);
1354 if (result == 0)
1355 result = (-EIO);
1356 }
1357
1358 DEBC(printk(ST_DEB_MSG "%s: Buffer flushed, %d EOF(s) written\n",
1359 name, cmd[4]));
1360 } else if (!STp->rew_at_close) {
1361 STps = &(STp->ps[STp->partition]);
1362 if (!STm->sysv || STps->rw != ST_READING) {
1363 if (STp->can_bsr)
1364 result = flush_buffer(STp, 0);
1365 else if (STps->eof == ST_FM_HIT) {
1366 result = cross_eof(STp, 0);
1367 if (result) {
1368 if (STps->drv_file >= 0)
1369 STps->drv_file++;
1370 STps->drv_block = 0;
1371 STps->eof = ST_FM;
1372 } else
1373 STps->eof = ST_NOEOF;
1374 }
1375 } else if ((STps->eof == ST_NOEOF &&
1376 !(result = cross_eof(STp, 1))) ||
1377 STps->eof == ST_FM_HIT) {
1378 if (STps->drv_file >= 0)
1379 STps->drv_file++;
1380 STps->drv_block = 0;
1381 STps->eof = ST_FM;
1382 }
1383 }
1384
1385 out:
1386 if (STp->rew_at_close) {
1387 result2 = st_int_ioctl(STp, MTREW, 1);
1388 if (result == 0)
1389 result = result2;
1390 }
1391 return result;
1392}
1393
1394
1395/* Close the device and release it. BKL is not needed: this is the only thread
1396 accessing this tape. */
1397static int st_release(struct inode *inode, struct file *filp)
1398{
1399 int result = 0;
1400 struct scsi_tape *STp = filp->private_data;
1401
1402 if (STp->door_locked == ST_LOCKED_AUTO)
1403 do_door_lock(STp, 0);
1404
1405 normalize_buffer(STp->buffer);
1406 write_lock(&st_dev_arr_lock);
1407 STp->in_use = 0;
1408 write_unlock(&st_dev_arr_lock);
1409 scsi_autopm_put_device(STp->device);
1410 scsi_tape_put(STp);
1411
1412 return result;
1413}
1414
1415/* The checks common to both reading and writing */
1416static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count)
1417{
1418 ssize_t retval = 0;
1419
1420 /*
1421 * If we are in the middle of error recovery, don't let anyone
1422 * else try and use this device. Also, if error recovery fails, it
1423 * may try and take the device offline, in which case all further
1424 * access to the device is prohibited.
1425 */
1426 if (!scsi_block_when_processing_errors(STp->device)) {
1427 retval = (-ENXIO);
1428 goto out;
1429 }
1430
1431 if (STp->ready != ST_READY) {
1432 if (STp->ready == ST_NO_TAPE)
1433 retval = (-ENOMEDIUM);
1434 else
1435 retval = (-EIO);
1436 goto out;
1437 }
1438
1439 if (! STp->modes[STp->current_mode].defined) {
1440 retval = (-ENXIO);
1441 goto out;
1442 }
1443
1444
1445 /*
1446 * If there was a bus reset, block further access
1447 * to this device.
1448 */
1449 if (STp->pos_unknown) {
1450 retval = (-EIO);
1451 goto out;
1452 }
1453
1454 if (count == 0)
1455 goto out;
1456
1457 DEB(
1458 if (!STp->in_use) {
1459 printk(ST_DEB_MSG "%s: Incorrect device.\n", tape_name(STp));
1460 retval = (-EIO);
1461 goto out;
1462 } ) /* end DEB */
1463
1464 if (STp->can_partitions &&
1465 (retval = switch_partition(STp)) < 0)
1466 goto out;
1467
1468 if (STp->block_size == 0 && STp->max_block > 0 &&
1469 (count < STp->min_block || count > STp->max_block)) {
1470 retval = (-EINVAL);
1471 goto out;
1472 }
1473
1474 if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED &&
1475 !do_door_lock(STp, 1))
1476 STp->door_locked = ST_LOCKED_AUTO;
1477
1478 out:
1479 return retval;
1480}
1481
1482
1483static int setup_buffering(struct scsi_tape *STp, const char __user *buf,
1484 size_t count, int is_read)
1485{
1486 int i, bufsize, retval = 0;
1487 struct st_buffer *STbp = STp->buffer;
1488
1489 if (is_read)
1490 i = STp->try_dio_now && try_rdio;
1491 else
1492 i = STp->try_dio_now && try_wdio;
1493
1494 if (i && ((unsigned long)buf & queue_dma_alignment(
1495 STp->device->request_queue)) == 0) {
1496 i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf,
1497 count, (is_read ? READ : WRITE));
1498 if (i > 0) {
1499 STbp->do_dio = i;
1500 STbp->buffer_bytes = 0; /* can be used as transfer counter */
1501 }
1502 else
1503 STbp->do_dio = 0; /* fall back to buffering with any error */
1504 STbp->sg_segs = STbp->do_dio;
1505 DEB(
1506 if (STbp->do_dio) {
1507 STp->nbr_dio++;
1508 STp->nbr_pages += STbp->do_dio;
1509 }
1510 )
1511 } else
1512 STbp->do_dio = 0;
1513 DEB( STp->nbr_requests++; )
1514
1515 if (!STbp->do_dio) {
1516 if (STp->block_size)
1517 bufsize = STp->block_size > st_fixed_buffer_size ?
1518 STp->block_size : st_fixed_buffer_size;
1519 else {
1520 bufsize = count;
1521 /* Make sure that data from previous user is not leaked even if
1522 HBA does not return correct residual */
1523 if (is_read && STp->sili && !STbp->cleared)
1524 clear_buffer(STbp);
1525 }
1526
1527 if (bufsize > STbp->buffer_size &&
1528 !enlarge_buffer(STbp, bufsize, STp->restr_dma)) {
1529 printk(KERN_WARNING "%s: Can't allocate %d byte tape buffer.\n",
1530 tape_name(STp), bufsize);
1531 retval = (-EOVERFLOW);
1532 goto out;
1533 }
1534 if (STp->block_size)
1535 STbp->buffer_blocks = bufsize / STp->block_size;
1536 }
1537
1538 out:
1539 return retval;
1540}
1541
1542
1543/* Can be called more than once after each setup_buffer() */
1544static void release_buffering(struct scsi_tape *STp, int is_read)
1545{
1546 struct st_buffer *STbp;
1547
1548 STbp = STp->buffer;
1549 if (STbp->do_dio) {
1550 sgl_unmap_user_pages(STbp, STbp->do_dio, is_read);
1551 STbp->do_dio = 0;
1552 STbp->sg_segs = 0;
1553 }
1554}
1555
1556
1557/* Write command */
1558static ssize_t
1559st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
1560{
1561 ssize_t total;
1562 ssize_t i, do_count, blks, transfer;
1563 ssize_t retval;
1564 int undone, retry_eot = 0, scode;
1565 int async_write;
1566 unsigned char cmd[MAX_COMMAND_SIZE];
1567 const char __user *b_point;
1568 struct st_request *SRpnt = NULL;
1569 struct scsi_tape *STp = filp->private_data;
1570 struct st_modedef *STm;
1571 struct st_partstat *STps;
1572 struct st_buffer *STbp;
1573 char *name = tape_name(STp);
1574
1575 if (mutex_lock_interruptible(&STp->lock))
1576 return -ERESTARTSYS;
1577
1578 retval = rw_checks(STp, filp, count);
1579 if (retval || count == 0)
1580 goto out;
1581
1582 /* Write must be integral number of blocks */
1583 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
1584 printk(KERN_WARNING "%s: Write not multiple of tape block size.\n",
1585 name);
1586 retval = (-EINVAL);
1587 goto out;
1588 }
1589
1590 STm = &(STp->modes[STp->current_mode]);
1591 STps = &(STp->ps[STp->partition]);
1592
1593 if (STp->write_prot) {
1594 retval = (-EACCES);
1595 goto out;
1596 }
1597
1598
1599 if (STps->rw == ST_READING) {
1600 retval = flush_buffer(STp, 0);
1601 if (retval)
1602 goto out;
1603 STps->rw = ST_WRITING;
1604 } else if (STps->rw != ST_WRITING &&
1605 STps->drv_file == 0 && STps->drv_block == 0) {
1606 if ((retval = set_mode_densblk(STp, STm)) < 0)
1607 goto out;
1608 if (STm->default_compression != ST_DONT_TOUCH &&
1609 !(STp->compression_changed)) {
1610 if (st_compression(STp, (STm->default_compression == ST_YES))) {
1611 printk(KERN_WARNING "%s: Can't set default compression.\n",
1612 name);
1613 if (modes_defined) {
1614 retval = (-EINVAL);
1615 goto out;
1616 }
1617 }
1618 }
1619 }
1620
1621 STbp = STp->buffer;
1622 i = write_behind_check(STp);
1623 if (i) {
1624 if (i == -ENOSPC)
1625 STps->eof = ST_EOM_OK;
1626 else
1627 STps->eof = ST_EOM_ERROR;
1628 }
1629
1630 if (STps->eof == ST_EOM_OK) {
1631 STps->eof = ST_EOD_1; /* allow next write */
1632 retval = (-ENOSPC);
1633 goto out;
1634 }
1635 else if (STps->eof == ST_EOM_ERROR) {
1636 retval = (-EIO);
1637 goto out;
1638 }
1639
1640 /* Check the buffer readability in cases where copy_user might catch
1641 the problems after some tape movement. */
1642 if (STp->block_size != 0 &&
1643 !STbp->do_dio &&
1644 (copy_from_user(&i, buf, 1) != 0 ||
1645 copy_from_user(&i, buf + count - 1, 1) != 0)) {
1646 retval = (-EFAULT);
1647 goto out;
1648 }
1649
1650 retval = setup_buffering(STp, buf, count, 0);
1651 if (retval)
1652 goto out;
1653
1654 total = count;
1655
1656 memset(cmd, 0, MAX_COMMAND_SIZE);
1657 cmd[0] = WRITE_6;
1658 cmd[1] = (STp->block_size != 0);
1659
1660 STps->rw = ST_WRITING;
1661
1662 b_point = buf;
1663 while (count > 0 && !retry_eot) {
1664
1665 if (STbp->do_dio) {
1666 do_count = count;
1667 }
1668 else {
1669 if (STp->block_size == 0)
1670 do_count = count;
1671 else {
1672 do_count = STbp->buffer_blocks * STp->block_size -
1673 STbp->buffer_bytes;
1674 if (do_count > count)
1675 do_count = count;
1676 }
1677
1678 i = append_to_buffer(b_point, STbp, do_count);
1679 if (i) {
1680 retval = i;
1681 goto out;
1682 }
1683 }
1684 count -= do_count;
1685 b_point += do_count;
1686
1687 async_write = STp->block_size == 0 && !STbp->do_dio &&
1688 STm->do_async_writes && STps->eof < ST_EOM_OK;
1689
1690 if (STp->block_size != 0 && STm->do_buffer_writes &&
1691 !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK &&
1692 STbp->buffer_bytes < STbp->buffer_size) {
1693 STp->dirty = 1;
1694 /* Don't write a buffer that is not full enough. */
1695 if (!async_write && count == 0)
1696 break;
1697 }
1698
1699 retry_write:
1700 if (STp->block_size == 0)
1701 blks = transfer = do_count;
1702 else {
1703 if (!STbp->do_dio)
1704 blks = STbp->buffer_bytes;
1705 else
1706 blks = do_count;
1707 blks /= STp->block_size;
1708 transfer = blks * STp->block_size;
1709 }
1710 cmd[2] = blks >> 16;
1711 cmd[3] = blks >> 8;
1712 cmd[4] = blks;
1713
1714 SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
1715 STp->device->request_queue->rq_timeout,
1716 MAX_WRITE_RETRIES, !async_write);
1717 if (!SRpnt) {
1718 retval = STbp->syscall_result;
1719 goto out;
1720 }
1721 if (async_write && !STbp->syscall_result) {
1722 STbp->writing = transfer;
1723 STp->dirty = !(STbp->writing ==
1724 STbp->buffer_bytes);
1725 SRpnt = NULL; /* Prevent releasing this request! */
1726 DEB( STp->write_pending = 1; )
1727 break;
1728 }
1729
1730 if (STbp->syscall_result != 0) {
1731 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1732
1733 DEBC(printk(ST_DEB_MSG "%s: Error on write:\n", name));
1734 if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) {
1735 scode = cmdstatp->sense_hdr.sense_key;
1736 if (cmdstatp->remainder_valid)
1737 undone = (int)cmdstatp->uremainder64;
1738 else if (STp->block_size == 0 &&
1739 scode == VOLUME_OVERFLOW)
1740 undone = transfer;
1741 else
1742 undone = 0;
1743 if (STp->block_size != 0)
1744 undone *= STp->block_size;
1745 if (undone <= do_count) {
1746 /* Only data from this write is not written */
1747 count += undone;
1748 b_point -= undone;
1749 do_count -= undone;
1750 if (STp->block_size)
1751 blks = (transfer - undone) / STp->block_size;
1752 STps->eof = ST_EOM_OK;
1753 /* Continue in fixed block mode if all written
1754 in this request but still something left to write
1755 (retval left to zero)
1756 */
1757 if (STp->block_size == 0 ||
1758 undone > 0 || count == 0)
1759 retval = (-ENOSPC); /* EOM within current request */
1760 DEBC(printk(ST_DEB_MSG
1761 "%s: EOM with %d bytes unwritten.\n",
1762 name, (int)count));
1763 } else {
1764 /* EOT within data buffered earlier (possible only
1765 in fixed block mode without direct i/o) */
1766 if (!retry_eot && !cmdstatp->deferred &&
1767 (scode == NO_SENSE || scode == RECOVERED_ERROR)) {
1768 move_buffer_data(STp->buffer, transfer - undone);
1769 retry_eot = 1;
1770 if (STps->drv_block >= 0) {
1771 STps->drv_block += (transfer - undone) /
1772 STp->block_size;
1773 }
1774 STps->eof = ST_EOM_OK;
1775 DEBC(printk(ST_DEB_MSG
1776 "%s: Retry write of %d bytes at EOM.\n",
1777 name, STp->buffer->buffer_bytes));
1778 goto retry_write;
1779 }
1780 else {
1781 /* Either error within data buffered by driver or
1782 failed retry */
1783 count -= do_count;
1784 blks = do_count = 0;
1785 STps->eof = ST_EOM_ERROR;
1786 STps->drv_block = (-1); /* Too cautious? */
1787 retval = (-EIO); /* EOM for old data */
1788 DEBC(printk(ST_DEB_MSG
1789 "%s: EOM with lost data.\n",
1790 name));
1791 }
1792 }
1793 } else {
1794 count += do_count;
1795 STps->drv_block = (-1); /* Too cautious? */
1796 retval = STbp->syscall_result;
1797 }
1798
1799 }
1800
1801 if (STps->drv_block >= 0) {
1802 if (STp->block_size == 0)
1803 STps->drv_block += (do_count > 0);
1804 else
1805 STps->drv_block += blks;
1806 }
1807
1808 STbp->buffer_bytes = 0;
1809 STp->dirty = 0;
1810
1811 if (retval || retry_eot) {
1812 if (count < total)
1813 retval = total - count;
1814 goto out;
1815 }
1816 }
1817
1818 if (STps->eof == ST_EOD_1)
1819 STps->eof = ST_EOM_OK;
1820 else if (STps->eof != ST_EOM_OK)
1821 STps->eof = ST_NOEOF;
1822 retval = total - count;
1823
1824 out:
1825 if (SRpnt != NULL)
1826 st_release_request(SRpnt);
1827 release_buffering(STp, 0);
1828 mutex_unlock(&STp->lock);
1829
1830 return retval;
1831}
1832
1833/* Read data from the tape. Returns zero in the normal case, one if the
1834 eof status has changed, and the negative error code in case of a
1835 fatal error. Otherwise updates the buffer and the eof state.
1836
1837 Does release user buffer mapping if it is set.
1838*/
1839static long read_tape(struct scsi_tape *STp, long count,
1840 struct st_request ** aSRpnt)
1841{
1842 int transfer, blks, bytes;
1843 unsigned char cmd[MAX_COMMAND_SIZE];
1844 struct st_request *SRpnt;
1845 struct st_modedef *STm;
1846 struct st_partstat *STps;
1847 struct st_buffer *STbp;
1848 int retval = 0;
1849 char *name = tape_name(STp);
1850
1851 if (count == 0)
1852 return 0;
1853
1854 STm = &(STp->modes[STp->current_mode]);
1855 STps = &(STp->ps[STp->partition]);
1856 if (STps->eof == ST_FM_HIT)
1857 return 1;
1858 STbp = STp->buffer;
1859
1860 if (STp->block_size == 0)
1861 blks = bytes = count;
1862 else {
1863 if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) {
1864 blks = (STp->buffer)->buffer_blocks;
1865 bytes = blks * STp->block_size;
1866 } else {
1867 bytes = count;
1868 if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size)
1869 bytes = (STp->buffer)->buffer_size;
1870 blks = bytes / STp->block_size;
1871 bytes = blks * STp->block_size;
1872 }
1873 }
1874
1875 memset(cmd, 0, MAX_COMMAND_SIZE);
1876 cmd[0] = READ_6;
1877 cmd[1] = (STp->block_size != 0);
1878 if (!cmd[1] && STp->sili)
1879 cmd[1] |= 2;
1880 cmd[2] = blks >> 16;
1881 cmd[3] = blks >> 8;
1882 cmd[4] = blks;
1883
1884 SRpnt = *aSRpnt;
1885 SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE,
1886 STp->device->request_queue->rq_timeout,
1887 MAX_RETRIES, 1);
1888 release_buffering(STp, 1);
1889 *aSRpnt = SRpnt;
1890 if (!SRpnt)
1891 return STbp->syscall_result;
1892
1893 STbp->read_pointer = 0;
1894 STps->at_sm = 0;
1895
1896 /* Something to check */
1897 if (STbp->syscall_result) {
1898 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1899
1900 retval = 1;
1901 DEBC(printk(ST_DEB_MSG "%s: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1902 name,
1903 SRpnt->sense[0], SRpnt->sense[1],
1904 SRpnt->sense[2], SRpnt->sense[3],
1905 SRpnt->sense[4], SRpnt->sense[5],
1906 SRpnt->sense[6], SRpnt->sense[7]));
1907 if (cmdstatp->have_sense) {
1908
1909 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
1910 cmdstatp->flags &= 0xcf; /* No need for EOM in this case */
1911
1912 if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */
1913 /* Compute the residual count */
1914 if (cmdstatp->remainder_valid)
1915 transfer = (int)cmdstatp->uremainder64;
1916 else
1917 transfer = 0;
1918 if (STp->block_size == 0 &&
1919 cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR)
1920 transfer = bytes;
1921
1922 if (cmdstatp->flags & SENSE_ILI) { /* ILI */
1923 if (STp->block_size == 0) {
1924 if (transfer <= 0) {
1925 if (transfer < 0)
1926 printk(KERN_NOTICE
1927 "%s: Failed to read %d byte block with %d byte transfer.\n",
1928 name, bytes - transfer, bytes);
1929 if (STps->drv_block >= 0)
1930 STps->drv_block += 1;
1931 STbp->buffer_bytes = 0;
1932 return (-ENOMEM);
1933 }
1934 STbp->buffer_bytes = bytes - transfer;
1935 } else {
1936 st_release_request(SRpnt);
1937 SRpnt = *aSRpnt = NULL;
1938 if (transfer == blks) { /* We did not get anything, error */
1939 printk(KERN_NOTICE "%s: Incorrect block size.\n", name);
1940 if (STps->drv_block >= 0)
1941 STps->drv_block += blks - transfer + 1;
1942 st_int_ioctl(STp, MTBSR, 1);
1943 return (-EIO);
1944 }
1945 /* We have some data, deliver it */
1946 STbp->buffer_bytes = (blks - transfer) *
1947 STp->block_size;
1948 DEBC(printk(ST_DEB_MSG
1949 "%s: ILI but enough data received %ld %d.\n",
1950 name, count, STbp->buffer_bytes));
1951 if (STps->drv_block >= 0)
1952 STps->drv_block += 1;
1953 if (st_int_ioctl(STp, MTBSR, 1))
1954 return (-EIO);
1955 }
1956 } else if (cmdstatp->flags & SENSE_FMK) { /* FM overrides EOM */
1957 if (STps->eof != ST_FM_HIT)
1958 STps->eof = ST_FM_HIT;
1959 else
1960 STps->eof = ST_EOD_2;
1961 if (STp->block_size == 0)
1962 STbp->buffer_bytes = 0;
1963 else
1964 STbp->buffer_bytes =
1965 bytes - transfer * STp->block_size;
1966 DEBC(printk(ST_DEB_MSG
1967 "%s: EOF detected (%d bytes read).\n",
1968 name, STbp->buffer_bytes));
1969 } else if (cmdstatp->flags & SENSE_EOM) {
1970 if (STps->eof == ST_FM)
1971 STps->eof = ST_EOD_1;
1972 else
1973 STps->eof = ST_EOM_OK;
1974 if (STp->block_size == 0)
1975 STbp->buffer_bytes = bytes - transfer;
1976 else
1977 STbp->buffer_bytes =
1978 bytes - transfer * STp->block_size;
1979
1980 DEBC(printk(ST_DEB_MSG "%s: EOM detected (%d bytes read).\n",
1981 name, STbp->buffer_bytes));
1982 }
1983 }
1984 /* end of EOF, EOM, ILI test */
1985 else { /* nonzero sense key */
1986 DEBC(printk(ST_DEB_MSG
1987 "%s: Tape error while reading.\n", name));
1988 STps->drv_block = (-1);
1989 if (STps->eof == ST_FM &&
1990 cmdstatp->sense_hdr.sense_key == BLANK_CHECK) {
1991 DEBC(printk(ST_DEB_MSG
1992 "%s: Zero returned for first BLANK CHECK after EOF.\n",
1993 name));
1994 STps->eof = ST_EOD_2; /* First BLANK_CHECK after FM */
1995 } else /* Some other extended sense code */
1996 retval = (-EIO);
1997 }
1998
1999 if (STbp->buffer_bytes < 0) /* Caused by bogus sense data */
2000 STbp->buffer_bytes = 0;
2001 }
2002 /* End of extended sense test */
2003 else { /* Non-extended sense */
2004 retval = STbp->syscall_result;
2005 }
2006
2007 }
2008 /* End of error handling */
2009 else { /* Read successful */
2010 STbp->buffer_bytes = bytes;
2011 if (STp->sili) /* In fixed block mode residual is always zero here */
2012 STbp->buffer_bytes -= STp->buffer->cmdstat.residual;
2013 }
2014
2015 if (STps->drv_block >= 0) {
2016 if (STp->block_size == 0)
2017 STps->drv_block++;
2018 else
2019 STps->drv_block += STbp->buffer_bytes / STp->block_size;
2020 }
2021 return retval;
2022}
2023
2024
2025/* Read command */
2026static ssize_t
2027st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
2028{
2029 ssize_t total;
2030 ssize_t retval = 0;
2031 ssize_t i, transfer;
2032 int special, do_dio = 0;
2033 struct st_request *SRpnt = NULL;
2034 struct scsi_tape *STp = filp->private_data;
2035 struct st_modedef *STm;
2036 struct st_partstat *STps;
2037 struct st_buffer *STbp = STp->buffer;
2038 DEB( char *name = tape_name(STp); )
2039
2040 if (mutex_lock_interruptible(&STp->lock))
2041 return -ERESTARTSYS;
2042
2043 retval = rw_checks(STp, filp, count);
2044 if (retval || count == 0)
2045 goto out;
2046
2047 STm = &(STp->modes[STp->current_mode]);
2048 if (STp->block_size != 0 && (count % STp->block_size) != 0) {
2049 if (!STm->do_read_ahead) {
2050 retval = (-EINVAL); /* Read must be integral number of blocks */
2051 goto out;
2052 }
2053 STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */
2054 }
2055
2056 STps = &(STp->ps[STp->partition]);
2057 if (STps->rw == ST_WRITING) {
2058 retval = flush_buffer(STp, 0);
2059 if (retval)
2060 goto out;
2061 STps->rw = ST_READING;
2062 }
2063 DEB(
2064 if (debugging && STps->eof != ST_NOEOF)
2065 printk(ST_DEB_MSG "%s: EOF/EOM flag up (%d). Bytes %d\n", name,
2066 STps->eof, STbp->buffer_bytes);
2067 ) /* end DEB */
2068
2069 retval = setup_buffering(STp, buf, count, 1);
2070 if (retval)
2071 goto out;
2072 do_dio = STbp->do_dio;
2073
2074 if (STbp->buffer_bytes == 0 &&
2075 STps->eof >= ST_EOD_1) {
2076 if (STps->eof < ST_EOD) {
2077 STps->eof += 1;
2078 retval = 0;
2079 goto out;
2080 }
2081 retval = (-EIO); /* EOM or Blank Check */
2082 goto out;
2083 }
2084
2085 if (do_dio) {
2086 /* Check the buffer writability before any tape movement. Don't alter
2087 buffer data. */
2088 if (copy_from_user(&i, buf, 1) != 0 ||
2089 copy_to_user(buf, &i, 1) != 0 ||
2090 copy_from_user(&i, buf + count - 1, 1) != 0 ||
2091 copy_to_user(buf + count - 1, &i, 1) != 0) {
2092 retval = (-EFAULT);
2093 goto out;
2094 }
2095 }
2096
2097 STps->rw = ST_READING;
2098
2099
2100 /* Loop until enough data in buffer or a special condition found */
2101 for (total = 0, special = 0; total < count && !special;) {
2102
2103 /* Get new data if the buffer is empty */
2104 if (STbp->buffer_bytes == 0) {
2105 special = read_tape(STp, count - total, &SRpnt);
2106 if (special < 0) { /* No need to continue read */
2107 retval = special;
2108 goto out;
2109 }
2110 }
2111
2112 /* Move the data from driver buffer to user buffer */
2113 if (STbp->buffer_bytes > 0) {
2114 DEB(
2115 if (debugging && STps->eof != ST_NOEOF)
2116 printk(ST_DEB_MSG
2117 "%s: EOF up (%d). Left %d, needed %d.\n", name,
2118 STps->eof, STbp->buffer_bytes,
2119 (int)(count - total));
2120 ) /* end DEB */
2121 transfer = STbp->buffer_bytes < count - total ?
2122 STbp->buffer_bytes : count - total;
2123 if (!do_dio) {
2124 i = from_buffer(STbp, buf, transfer);
2125 if (i) {
2126 retval = i;
2127 goto out;
2128 }
2129 }
2130 buf += transfer;
2131 total += transfer;
2132 }
2133
2134 if (STp->block_size == 0)
2135 break; /* Read only one variable length block */
2136
2137 } /* for (total = 0, special = 0;
2138 total < count && !special; ) */
2139
2140 /* Change the eof state if no data from tape or buffer */
2141 if (total == 0) {
2142 if (STps->eof == ST_FM_HIT) {
2143 STps->eof = ST_FM;
2144 STps->drv_block = 0;
2145 if (STps->drv_file >= 0)
2146 STps->drv_file++;
2147 } else if (STps->eof == ST_EOD_1) {
2148 STps->eof = ST_EOD_2;
2149 STps->drv_block = 0;
2150 if (STps->drv_file >= 0)
2151 STps->drv_file++;
2152 } else if (STps->eof == ST_EOD_2)
2153 STps->eof = ST_EOD;
2154 } else if (STps->eof == ST_FM)
2155 STps->eof = ST_NOEOF;
2156 retval = total;
2157
2158 out:
2159 if (SRpnt != NULL) {
2160 st_release_request(SRpnt);
2161 SRpnt = NULL;
2162 }
2163 if (do_dio) {
2164 release_buffering(STp, 1);
2165 STbp->buffer_bytes = 0;
2166 }
2167 mutex_unlock(&STp->lock);
2168
2169 return retval;
2170}
2171
2172
2173
2174DEB(
2175/* Set the driver options */
2176static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm, char *name)
2177{
2178 if (debugging) {
2179 printk(KERN_INFO
2180 "%s: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n",
2181 name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes,
2182 STm->do_read_ahead);
2183 printk(KERN_INFO
2184 "%s: can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n",
2185 name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock);
2186 printk(KERN_INFO
2187 "%s: defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n",
2188 name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions,
2189 STp->scsi2_logical);
2190 printk(KERN_INFO
2191 "%s: sysv: %d nowait: %d sili: %d nowait_filemark: %d\n",
2192 name, STm->sysv, STp->immediate, STp->sili,
2193 STp->immediate_filemark);
2194 printk(KERN_INFO "%s: debugging: %d\n",
2195 name, debugging);
2196 }
2197}
2198 )
2199
2200
2201static int st_set_options(struct scsi_tape *STp, long options)
2202{
2203 int value;
2204 long code;
2205 struct st_modedef *STm;
2206 char *name = tape_name(STp);
2207 struct cdev *cd0, *cd1;
2208
2209 STm = &(STp->modes[STp->current_mode]);
2210 if (!STm->defined) {
2211 cd0 = STm->cdevs[0]; cd1 = STm->cdevs[1];
2212 memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef));
2213 STm->cdevs[0] = cd0; STm->cdevs[1] = cd1;
2214 modes_defined = 1;
2215 DEBC(printk(ST_DEB_MSG
2216 "%s: Initialized mode %d definition from mode 0\n",
2217 name, STp->current_mode));
2218 }
2219
2220 code = options & MT_ST_OPTIONS;
2221 if (code == MT_ST_BOOLEANS) {
2222 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
2223 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
2224 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
2225 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
2226 STp->two_fm = (options & MT_ST_TWO_FM) != 0;
2227 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
2228 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
2229 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
2230 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
2231 if ((STp->device)->scsi_level >= SCSI_2)
2232 STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
2233 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
2234 STp->immediate = (options & MT_ST_NOWAIT) != 0;
2235 STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0;
2236 STm->sysv = (options & MT_ST_SYSV) != 0;
2237 STp->sili = (options & MT_ST_SILI) != 0;
2238 DEB( debugging = (options & MT_ST_DEBUGGING) != 0;
2239 st_log_options(STp, STm, name); )
2240 } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
2241 value = (code == MT_ST_SETBOOLEANS);
2242 if ((options & MT_ST_BUFFER_WRITES) != 0)
2243 STm->do_buffer_writes = value;
2244 if ((options & MT_ST_ASYNC_WRITES) != 0)
2245 STm->do_async_writes = value;
2246 if ((options & MT_ST_DEF_WRITES) != 0)
2247 STm->defaults_for_writes = value;
2248 if ((options & MT_ST_READ_AHEAD) != 0)
2249 STm->do_read_ahead = value;
2250 if ((options & MT_ST_TWO_FM) != 0)
2251 STp->two_fm = value;
2252 if ((options & MT_ST_FAST_MTEOM) != 0)
2253 STp->fast_mteom = value;
2254 if ((options & MT_ST_AUTO_LOCK) != 0)
2255 STp->do_auto_lock = value;
2256 if ((options & MT_ST_CAN_BSR) != 0)
2257 STp->can_bsr = value;
2258 if ((options & MT_ST_NO_BLKLIMS) != 0)
2259 STp->omit_blklims = value;
2260 if ((STp->device)->scsi_level >= SCSI_2 &&
2261 (options & MT_ST_CAN_PARTITIONS) != 0)
2262 STp->can_partitions = value;
2263 if ((options & MT_ST_SCSI2LOGICAL) != 0)
2264 STp->scsi2_logical = value;
2265 if ((options & MT_ST_NOWAIT) != 0)
2266 STp->immediate = value;
2267 if ((options & MT_ST_NOWAIT_EOF) != 0)
2268 STp->immediate_filemark = value;
2269 if ((options & MT_ST_SYSV) != 0)
2270 STm->sysv = value;
2271 if ((options & MT_ST_SILI) != 0)
2272 STp->sili = value;
2273 DEB(
2274 if ((options & MT_ST_DEBUGGING) != 0)
2275 debugging = value;
2276 st_log_options(STp, STm, name); )
2277 } else if (code == MT_ST_WRITE_THRESHOLD) {
2278 /* Retained for compatibility */
2279 } else if (code == MT_ST_DEF_BLKSIZE) {
2280 value = (options & ~MT_ST_OPTIONS);
2281 if (value == ~MT_ST_OPTIONS) {
2282 STm->default_blksize = (-1);
2283 DEBC( printk(KERN_INFO "%s: Default block size disabled.\n", name));
2284 } else {
2285 STm->default_blksize = value;
2286 DEBC( printk(KERN_INFO "%s: Default block size set to %d bytes.\n",
2287 name, STm->default_blksize));
2288 if (STp->ready == ST_READY) {
2289 STp->blksize_changed = 0;
2290 set_mode_densblk(STp, STm);
2291 }
2292 }
2293 } else if (code == MT_ST_TIMEOUTS) {
2294 value = (options & ~MT_ST_OPTIONS);
2295 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
2296 STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
2297 DEBC( printk(KERN_INFO "%s: Long timeout set to %d seconds.\n", name,
2298 (value & ~MT_ST_SET_LONG_TIMEOUT)));
2299 } else {
2300 blk_queue_rq_timeout(STp->device->request_queue,
2301 value * HZ);
2302 DEBC( printk(KERN_INFO "%s: Normal timeout set to %d seconds.\n",
2303 name, value) );
2304 }
2305 } else if (code == MT_ST_SET_CLN) {
2306 value = (options & ~MT_ST_OPTIONS) & 0xff;
2307 if (value != 0 &&
2308 (value < EXTENDED_SENSE_START ||
2309 value >= SCSI_SENSE_BUFFERSIZE))
2310 return (-EINVAL);
2311 STp->cln_mode = value;
2312 STp->cln_sense_mask = (options >> 8) & 0xff;
2313 STp->cln_sense_value = (options >> 16) & 0xff;
2314 printk(KERN_INFO
2315 "%s: Cleaning request mode %d, mask %02x, value %02x\n",
2316 name, value, STp->cln_sense_mask, STp->cln_sense_value);
2317 } else if (code == MT_ST_DEF_OPTIONS) {
2318 code = (options & ~MT_ST_CLEAR_DEFAULT);
2319 value = (options & MT_ST_CLEAR_DEFAULT);
2320 if (code == MT_ST_DEF_DENSITY) {
2321 if (value == MT_ST_CLEAR_DEFAULT) {
2322 STm->default_density = (-1);
2323 DEBC( printk(KERN_INFO "%s: Density default disabled.\n",
2324 name));
2325 } else {
2326 STm->default_density = value & 0xff;
2327 DEBC( printk(KERN_INFO "%s: Density default set to %x\n",
2328 name, STm->default_density));
2329 if (STp->ready == ST_READY) {
2330 STp->density_changed = 0;
2331 set_mode_densblk(STp, STm);
2332 }
2333 }
2334 } else if (code == MT_ST_DEF_DRVBUFFER) {
2335 if (value == MT_ST_CLEAR_DEFAULT) {
2336 STp->default_drvbuffer = 0xff;
2337 DEBC( printk(KERN_INFO
2338 "%s: Drive buffer default disabled.\n", name));
2339 } else {
2340 STp->default_drvbuffer = value & 7;
2341 DEBC( printk(KERN_INFO
2342 "%s: Drive buffer default set to %x\n",
2343 name, STp->default_drvbuffer));
2344 if (STp->ready == ST_READY)
2345 st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer);
2346 }
2347 } else if (code == MT_ST_DEF_COMPRESSION) {
2348 if (value == MT_ST_CLEAR_DEFAULT) {
2349 STm->default_compression = ST_DONT_TOUCH;
2350 DEBC( printk(KERN_INFO
2351 "%s: Compression default disabled.\n", name));
2352 } else {
2353 if ((value & 0xff00) != 0) {
2354 STp->c_algo = (value & 0xff00) >> 8;
2355 DEBC( printk(KERN_INFO "%s: Compression algorithm set to 0x%x.\n",
2356 name, STp->c_algo));
2357 }
2358 if ((value & 0xff) != 0xff) {
2359 STm->default_compression = (value & 1 ? ST_YES : ST_NO);
2360 DEBC( printk(KERN_INFO "%s: Compression default set to %x\n",
2361 name, (value & 1)));
2362 if (STp->ready == ST_READY) {
2363 STp->compression_changed = 0;
2364 st_compression(STp, (STm->default_compression == ST_YES));
2365 }
2366 }
2367 }
2368 }
2369 } else
2370 return (-EIO);
2371
2372 return 0;
2373}
2374
2375#define MODE_HEADER_LENGTH 4
2376
2377/* Mode header and page byte offsets */
2378#define MH_OFF_DATA_LENGTH 0
2379#define MH_OFF_MEDIUM_TYPE 1
2380#define MH_OFF_DEV_SPECIFIC 2
2381#define MH_OFF_BDESCS_LENGTH 3
2382#define MP_OFF_PAGE_NBR 0
2383#define MP_OFF_PAGE_LENGTH 1
2384
2385/* Mode header and page bit masks */
2386#define MH_BIT_WP 0x80
2387#define MP_MSK_PAGE_NBR 0x3f
2388
2389/* Don't return block descriptors */
2390#define MODE_SENSE_OMIT_BDESCS 0x08
2391
2392#define MODE_SELECT_PAGE_FORMAT 0x10
2393
2394/* Read a mode page into the tape buffer. The block descriptors are included
2395 if incl_block_descs is true. The page control is ored to the page number
2396 parameter, if necessary. */
2397static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs)
2398{
2399 unsigned char cmd[MAX_COMMAND_SIZE];
2400 struct st_request *SRpnt;
2401
2402 memset(cmd, 0, MAX_COMMAND_SIZE);
2403 cmd[0] = MODE_SENSE;
2404 if (omit_block_descs)
2405 cmd[1] = MODE_SENSE_OMIT_BDESCS;
2406 cmd[2] = page;
2407 cmd[4] = 255;
2408
2409 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_FROM_DEVICE,
2410 STp->device->request_queue->rq_timeout, 0, 1);
2411 if (SRpnt == NULL)
2412 return (STp->buffer)->syscall_result;
2413
2414 st_release_request(SRpnt);
2415
2416 return STp->buffer->syscall_result;
2417}
2418
2419
2420/* Send the mode page in the tape buffer to the drive. Assumes that the mode data
2421 in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */
2422static int write_mode_page(struct scsi_tape *STp, int page, int slow)
2423{
2424 int pgo;
2425 unsigned char cmd[MAX_COMMAND_SIZE];
2426 struct st_request *SRpnt;
2427 int timeout;
2428
2429 memset(cmd, 0, MAX_COMMAND_SIZE);
2430 cmd[0] = MODE_SELECT;
2431 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2432 pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH];
2433 cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2;
2434
2435 /* Clear reserved fields */
2436 (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0;
2437 (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0;
2438 (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP;
2439 (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR;
2440
2441 timeout = slow ?
2442 STp->long_timeout : STp->device->request_queue->rq_timeout;
2443 SRpnt = st_do_scsi(NULL, STp, cmd, cmd[4], DMA_TO_DEVICE,
2444 timeout, 0, 1);
2445 if (SRpnt == NULL)
2446 return (STp->buffer)->syscall_result;
2447
2448 st_release_request(SRpnt);
2449
2450 return STp->buffer->syscall_result;
2451}
2452
2453
2454#define COMPRESSION_PAGE 0x0f
2455#define COMPRESSION_PAGE_LENGTH 16
2456
2457#define CP_OFF_DCE_DCC 2
2458#define CP_OFF_C_ALGO 7
2459
2460#define DCE_MASK 0x80
2461#define DCC_MASK 0x40
2462#define RED_MASK 0x60
2463
2464
2465/* Control the compression with mode page 15. Algorithm not changed if zero.
2466
2467 The block descriptors are read and written because Sony SDT-7000 does not
2468 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
2469 Including block descriptors should not cause any harm to other drives. */
2470
2471static int st_compression(struct scsi_tape * STp, int state)
2472{
2473 int retval;
2474 int mpoffs; /* Offset to mode page start */
2475 unsigned char *b_data = (STp->buffer)->b_data;
2476 DEB( char *name = tape_name(STp); )
2477
2478 if (STp->ready != ST_READY)
2479 return (-EIO);
2480
2481 /* Read the current page contents */
2482 retval = read_mode_page(STp, COMPRESSION_PAGE, 0);
2483 if (retval) {
2484 DEBC(printk(ST_DEB_MSG "%s: Compression mode page not supported.\n",
2485 name));
2486 return (-EIO);
2487 }
2488
2489 mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH];
2490 DEBC(printk(ST_DEB_MSG "%s: Compression state is %d.\n", name,
2491 (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0)));
2492
2493 /* Check if compression can be changed */
2494 if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) {
2495 DEBC(printk(ST_DEB_MSG "%s: Compression not supported.\n", name));
2496 return (-EIO);
2497 }
2498
2499 /* Do the change */
2500 if (state) {
2501 b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK;
2502 if (STp->c_algo != 0)
2503 b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo;
2504 }
2505 else {
2506 b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK;
2507 if (STp->c_algo != 0)
2508 b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */
2509 }
2510
2511 retval = write_mode_page(STp, COMPRESSION_PAGE, 0);
2512 if (retval) {
2513 DEBC(printk(ST_DEB_MSG "%s: Compression change failed.\n", name));
2514 return (-EIO);
2515 }
2516 DEBC(printk(ST_DEB_MSG "%s: Compression state changed to %d.\n",
2517 name, state));
2518
2519 STp->compression_changed = 1;
2520 return 0;
2521}
2522
2523
2524/* Process the load and unload commands (does unload if the load code is zero) */
2525static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code)
2526{
2527 int retval = (-EIO), timeout;
2528 DEB( char *name = tape_name(STp); )
2529 unsigned char cmd[MAX_COMMAND_SIZE];
2530 struct st_partstat *STps;
2531 struct st_request *SRpnt;
2532
2533 if (STp->ready != ST_READY && !load_code) {
2534 if (STp->ready == ST_NO_TAPE)
2535 return (-ENOMEDIUM);
2536 else
2537 return (-EIO);
2538 }
2539
2540 memset(cmd, 0, MAX_COMMAND_SIZE);
2541 cmd[0] = START_STOP;
2542 if (load_code)
2543 cmd[4] |= 1;
2544 /*
2545 * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A
2546 */
2547 if (load_code >= 1 + MT_ST_HPLOADER_OFFSET
2548 && load_code <= 6 + MT_ST_HPLOADER_OFFSET) {
2549 DEBC(printk(ST_DEB_MSG "%s: Enhanced %sload slot %2d.\n",
2550 name, (cmd[4]) ? "" : "un",
2551 load_code - MT_ST_HPLOADER_OFFSET));
2552 cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */
2553 }
2554 if (STp->immediate) {
2555 cmd[1] = 1; /* Don't wait for completion */
2556 timeout = STp->device->request_queue->rq_timeout;
2557 }
2558 else
2559 timeout = STp->long_timeout;
2560
2561 DEBC(
2562 if (!load_code)
2563 printk(ST_DEB_MSG "%s: Unloading tape.\n", name);
2564 else
2565 printk(ST_DEB_MSG "%s: Loading tape.\n", name);
2566 );
2567
2568 SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE,
2569 timeout, MAX_RETRIES, 1);
2570 if (!SRpnt)
2571 return (STp->buffer)->syscall_result;
2572
2573 retval = (STp->buffer)->syscall_result;
2574 st_release_request(SRpnt);
2575
2576 if (!retval) { /* SCSI command successful */
2577
2578 if (!load_code) {
2579 STp->rew_at_close = 0;
2580 STp->ready = ST_NO_TAPE;
2581 }
2582 else {
2583 STp->rew_at_close = STp->autorew_dev;
2584 retval = check_tape(STp, filp);
2585 if (retval > 0)
2586 retval = 0;
2587 }
2588 }
2589 else {
2590 STps = &(STp->ps[STp->partition]);
2591 STps->drv_file = STps->drv_block = (-1);
2592 }
2593
2594 return retval;
2595}
2596
2597#if DEBUG
2598#define ST_DEB_FORWARD 0
2599#define ST_DEB_BACKWARD 1
2600static void deb_space_print(char *name, int direction, char *units, unsigned char *cmd)
2601{
2602 s32 sc;
2603
2604 sc = cmd[2] & 0x80 ? 0xff000000 : 0;
2605 sc |= (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
2606 if (direction)
2607 sc = -sc;
2608 printk(ST_DEB_MSG "%s: Spacing tape %s over %d %s.\n", name,
2609 direction ? "backward" : "forward", sc, units);
2610}
2611#endif
2612
2613
2614/* Internal ioctl function */
2615static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg)
2616{
2617 int timeout;
2618 long ltmp;
2619 int ioctl_result;
2620 int chg_eof = 1;
2621 unsigned char cmd[MAX_COMMAND_SIZE];
2622 struct st_request *SRpnt;
2623 struct st_partstat *STps;
2624 int fileno, blkno, at_sm, undone;
2625 int datalen = 0, direction = DMA_NONE;
2626 char *name = tape_name(STp);
2627
2628 WARN_ON(STp->buffer->do_dio != 0);
2629 if (STp->ready != ST_READY) {
2630 if (STp->ready == ST_NO_TAPE)
2631 return (-ENOMEDIUM);
2632 else
2633 return (-EIO);
2634 }
2635 timeout = STp->long_timeout;
2636 STps = &(STp->ps[STp->partition]);
2637 fileno = STps->drv_file;
2638 blkno = STps->drv_block;
2639 at_sm = STps->at_sm;
2640
2641 memset(cmd, 0, MAX_COMMAND_SIZE);
2642 switch (cmd_in) {
2643 case MTFSFM:
2644 chg_eof = 0; /* Changed from the FSF after this */
2645 case MTFSF:
2646 cmd[0] = SPACE;
2647 cmd[1] = 0x01; /* Space FileMarks */
2648 cmd[2] = (arg >> 16);
2649 cmd[3] = (arg >> 8);
2650 cmd[4] = arg;
2651 DEBC(deb_space_print(name, ST_DEB_FORWARD, "filemarks", cmd);)
2652 if (fileno >= 0)
2653 fileno += arg;
2654 blkno = 0;
2655 at_sm &= (arg == 0);
2656 break;
2657 case MTBSFM:
2658 chg_eof = 0; /* Changed from the FSF after this */
2659 case MTBSF:
2660 cmd[0] = SPACE;
2661 cmd[1] = 0x01; /* Space FileMarks */
2662 ltmp = (-arg);
2663 cmd[2] = (ltmp >> 16);
2664 cmd[3] = (ltmp >> 8);
2665 cmd[4] = ltmp;
2666 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "filemarks", cmd);)
2667 if (fileno >= 0)
2668 fileno -= arg;
2669 blkno = (-1); /* We can't know the block number */
2670 at_sm &= (arg == 0);
2671 break;
2672 case MTFSR:
2673 cmd[0] = SPACE;
2674 cmd[1] = 0x00; /* Space Blocks */
2675 cmd[2] = (arg >> 16);
2676 cmd[3] = (arg >> 8);
2677 cmd[4] = arg;
2678 DEBC(deb_space_print(name, ST_DEB_FORWARD, "blocks", cmd);)
2679 if (blkno >= 0)
2680 blkno += arg;
2681 at_sm &= (arg == 0);
2682 break;
2683 case MTBSR:
2684 cmd[0] = SPACE;
2685 cmd[1] = 0x00; /* Space Blocks */
2686 ltmp = (-arg);
2687 cmd[2] = (ltmp >> 16);
2688 cmd[3] = (ltmp >> 8);
2689 cmd[4] = ltmp;
2690 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "blocks", cmd);)
2691 if (blkno >= 0)
2692 blkno -= arg;
2693 at_sm &= (arg == 0);
2694 break;
2695 case MTFSS:
2696 cmd[0] = SPACE;
2697 cmd[1] = 0x04; /* Space Setmarks */
2698 cmd[2] = (arg >> 16);
2699 cmd[3] = (arg >> 8);
2700 cmd[4] = arg;
2701 DEBC(deb_space_print(name, ST_DEB_FORWARD, "setmarks", cmd);)
2702 if (arg != 0) {
2703 blkno = fileno = (-1);
2704 at_sm = 1;
2705 }
2706 break;
2707 case MTBSS:
2708 cmd[0] = SPACE;
2709 cmd[1] = 0x04; /* Space Setmarks */
2710 ltmp = (-arg);
2711 cmd[2] = (ltmp >> 16);
2712 cmd[3] = (ltmp >> 8);
2713 cmd[4] = ltmp;
2714 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "setmarks", cmd);)
2715 if (arg != 0) {
2716 blkno = fileno = (-1);
2717 at_sm = 1;
2718 }
2719 break;
2720 case MTWEOF:
2721 case MTWEOFI:
2722 case MTWSM:
2723 if (STp->write_prot)
2724 return (-EACCES);
2725 cmd[0] = WRITE_FILEMARKS;
2726 if (cmd_in == MTWSM)
2727 cmd[1] = 2;
2728 if (cmd_in == MTWEOFI ||
2729 (cmd_in == MTWEOF && STp->immediate_filemark))
2730 cmd[1] |= 1;
2731 cmd[2] = (arg >> 16);
2732 cmd[3] = (arg >> 8);
2733 cmd[4] = arg;
2734 timeout = STp->device->request_queue->rq_timeout;
2735 DEBC(
2736 if (cmd_in != MTWSM)
2737 printk(ST_DEB_MSG "%s: Writing %d filemarks.\n", name,
2738 cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
2739 else
2740 printk(ST_DEB_MSG "%s: Writing %d setmarks.\n", name,
2741 cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
2742 )
2743 if (fileno >= 0)
2744 fileno += arg;
2745 blkno = 0;
2746 at_sm = (cmd_in == MTWSM);
2747 break;
2748 case MTREW:
2749 cmd[0] = REZERO_UNIT;
2750 if (STp->immediate) {
2751 cmd[1] = 1; /* Don't wait for completion */
2752 timeout = STp->device->request_queue->rq_timeout;
2753 }
2754 DEBC(printk(ST_DEB_MSG "%s: Rewinding tape.\n", name));
2755 fileno = blkno = at_sm = 0;
2756 break;
2757 case MTNOP:
2758 DEBC(printk(ST_DEB_MSG "%s: No op on tape.\n", name));
2759 return 0; /* Should do something ? */
2760 break;
2761 case MTRETEN:
2762 cmd[0] = START_STOP;
2763 if (STp->immediate) {
2764 cmd[1] = 1; /* Don't wait for completion */
2765 timeout = STp->device->request_queue->rq_timeout;
2766 }
2767 cmd[4] = 3;
2768 DEBC(printk(ST_DEB_MSG "%s: Retensioning tape.\n", name));
2769 fileno = blkno = at_sm = 0;
2770 break;
2771 case MTEOM:
2772 if (!STp->fast_mteom) {
2773 /* space to the end of tape */
2774 ioctl_result = st_int_ioctl(STp, MTFSF, 0x7fffff);
2775 fileno = STps->drv_file;
2776 if (STps->eof >= ST_EOD_1)
2777 return 0;
2778 /* The next lines would hide the number of spaced FileMarks
2779 That's why I inserted the previous lines. I had no luck
2780 with detecting EOM with FSF, so we go now to EOM.
2781 Joerg Weule */
2782 } else
2783 fileno = (-1);
2784 cmd[0] = SPACE;
2785 cmd[1] = 3;
2786 DEBC(printk(ST_DEB_MSG "%s: Spacing to end of recorded medium.\n",
2787 name));
2788 blkno = -1;
2789 at_sm = 0;
2790 break;
2791 case MTERASE:
2792 if (STp->write_prot)
2793 return (-EACCES);
2794 cmd[0] = ERASE;
2795 cmd[1] = (arg ? 1 : 0); /* Long erase with non-zero argument */
2796 if (STp->immediate) {
2797 cmd[1] |= 2; /* Don't wait for completion */
2798 timeout = STp->device->request_queue->rq_timeout;
2799 }
2800 else
2801 timeout = STp->long_timeout * 8;
2802
2803 DEBC(printk(ST_DEB_MSG "%s: Erasing tape.\n", name));
2804 fileno = blkno = at_sm = 0;
2805 break;
2806 case MTSETBLK: /* Set block length */
2807 case MTSETDENSITY: /* Set tape density */
2808 case MTSETDRVBUFFER: /* Set drive buffering */
2809 case SET_DENS_AND_BLK: /* Set density and block size */
2810 chg_eof = 0;
2811 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
2812 return (-EIO); /* Not allowed if data in buffer */
2813 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
2814 (arg & MT_ST_BLKSIZE_MASK) != 0 &&
2815 STp->max_block > 0 &&
2816 ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block ||
2817 (arg & MT_ST_BLKSIZE_MASK) > STp->max_block)) {
2818 printk(KERN_WARNING "%s: Illegal block size.\n", name);
2819 return (-EINVAL);
2820 }
2821 cmd[0] = MODE_SELECT;
2822 if ((STp->use_pf & USE_PF))
2823 cmd[1] = MODE_SELECT_PAGE_FORMAT;
2824 cmd[4] = datalen = 12;
2825 direction = DMA_TO_DEVICE;
2826
2827 memset((STp->buffer)->b_data, 0, 12);
2828 if (cmd_in == MTSETDRVBUFFER)
2829 (STp->buffer)->b_data[2] = (arg & 7) << 4;
2830 else
2831 (STp->buffer)->b_data[2] =
2832 STp->drv_buffer << 4;
2833 (STp->buffer)->b_data[3] = 8; /* block descriptor length */
2834 if (cmd_in == MTSETDENSITY) {
2835 (STp->buffer)->b_data[4] = arg;
2836 STp->density_changed = 1; /* At least we tried ;-) */
2837 } else if (cmd_in == SET_DENS_AND_BLK)
2838 (STp->buffer)->b_data[4] = arg >> 24;
2839 else
2840 (STp->buffer)->b_data[4] = STp->density;
2841 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2842 ltmp = arg & MT_ST_BLKSIZE_MASK;
2843 if (cmd_in == MTSETBLK)
2844 STp->blksize_changed = 1; /* At least we tried ;-) */
2845 } else
2846 ltmp = STp->block_size;
2847 (STp->buffer)->b_data[9] = (ltmp >> 16);
2848 (STp->buffer)->b_data[10] = (ltmp >> 8);
2849 (STp->buffer)->b_data[11] = ltmp;
2850 timeout = STp->device->request_queue->rq_timeout;
2851 DEBC(
2852 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK)
2853 printk(ST_DEB_MSG
2854 "%s: Setting block size to %d bytes.\n", name,
2855 (STp->buffer)->b_data[9] * 65536 +
2856 (STp->buffer)->b_data[10] * 256 +
2857 (STp->buffer)->b_data[11]);
2858 if (cmd_in == MTSETDENSITY || cmd_in == SET_DENS_AND_BLK)
2859 printk(ST_DEB_MSG
2860 "%s: Setting density code to %x.\n", name,
2861 (STp->buffer)->b_data[4]);
2862 if (cmd_in == MTSETDRVBUFFER)
2863 printk(ST_DEB_MSG
2864 "%s: Setting drive buffer code to %d.\n", name,
2865 ((STp->buffer)->b_data[2] >> 4) & 7);
2866 )
2867 break;
2868 default:
2869 return (-ENOSYS);
2870 }
2871
2872 SRpnt = st_do_scsi(NULL, STp, cmd, datalen, direction,
2873 timeout, MAX_RETRIES, 1);
2874 if (!SRpnt)
2875 return (STp->buffer)->syscall_result;
2876
2877 ioctl_result = (STp->buffer)->syscall_result;
2878
2879 if (!ioctl_result) { /* SCSI command successful */
2880 st_release_request(SRpnt);
2881 SRpnt = NULL;
2882 STps->drv_block = blkno;
2883 STps->drv_file = fileno;
2884 STps->at_sm = at_sm;
2885
2886 if (cmd_in == MTBSFM)
2887 ioctl_result = st_int_ioctl(STp, MTFSF, 1);
2888 else if (cmd_in == MTFSFM)
2889 ioctl_result = st_int_ioctl(STp, MTBSF, 1);
2890
2891 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2892 STp->block_size = arg & MT_ST_BLKSIZE_MASK;
2893 if (STp->block_size != 0) {
2894 (STp->buffer)->buffer_blocks =
2895 (STp->buffer)->buffer_size / STp->block_size;
2896 }
2897 (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
2898 if (cmd_in == SET_DENS_AND_BLK)
2899 STp->density = arg >> MT_ST_DENSITY_SHIFT;
2900 } else if (cmd_in == MTSETDRVBUFFER)
2901 STp->drv_buffer = (arg & 7);
2902 else if (cmd_in == MTSETDENSITY)
2903 STp->density = arg;
2904
2905 if (cmd_in == MTEOM)
2906 STps->eof = ST_EOD;
2907 else if (cmd_in == MTFSF)
2908 STps->eof = ST_FM;
2909 else if (chg_eof)
2910 STps->eof = ST_NOEOF;
2911
2912 if (cmd_in == MTWEOF || cmd_in == MTWEOFI)
2913 STps->rw = ST_IDLE; /* prevent automatic WEOF at close */
2914 } else { /* SCSI command was not completely successful. Don't return
2915 from this block without releasing the SCSI command block! */
2916 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
2917
2918 if (cmdstatp->flags & SENSE_EOM) {
2919 if (cmd_in != MTBSF && cmd_in != MTBSFM &&
2920 cmd_in != MTBSR && cmd_in != MTBSS)
2921 STps->eof = ST_EOM_OK;
2922 STps->drv_block = 0;
2923 }
2924
2925 if (cmdstatp->remainder_valid)
2926 undone = (int)cmdstatp->uremainder64;
2927 else
2928 undone = 0;
2929
2930 if ((cmd_in == MTWEOF || cmd_in == MTWEOFI) &&
2931 cmdstatp->have_sense &&
2932 (cmdstatp->flags & SENSE_EOM)) {
2933 if (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
2934 cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) {
2935 ioctl_result = 0; /* EOF(s) written successfully at EOM */
2936 STps->eof = ST_NOEOF;
2937 } else { /* Writing EOF(s) failed */
2938 if (fileno >= 0)
2939 fileno -= undone;
2940 if (undone < arg)
2941 STps->eof = ST_NOEOF;
2942 }
2943 STps->drv_file = fileno;
2944 } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) {
2945 if (fileno >= 0)
2946 STps->drv_file = fileno - undone;
2947 else
2948 STps->drv_file = fileno;
2949 STps->drv_block = -1;
2950 STps->eof = ST_NOEOF;
2951 } else if ((cmd_in == MTBSF) || (cmd_in == MTBSFM)) {
2952 if (arg > 0 && undone < 0) /* Some drives get this wrong */
2953 undone = (-undone);
2954 if (STps->drv_file >= 0)
2955 STps->drv_file = fileno + undone;
2956 STps->drv_block = 0;
2957 STps->eof = ST_NOEOF;
2958 } else if (cmd_in == MTFSR) {
2959 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
2960 if (STps->drv_file >= 0)
2961 STps->drv_file++;
2962 STps->drv_block = 0;
2963 STps->eof = ST_FM;
2964 } else {
2965 if (blkno >= undone)
2966 STps->drv_block = blkno - undone;
2967 else
2968 STps->drv_block = (-1);
2969 STps->eof = ST_NOEOF;
2970 }
2971 } else if (cmd_in == MTBSR) {
2972 if (cmdstatp->flags & SENSE_FMK) { /* Hit filemark */
2973 STps->drv_file--;
2974 STps->drv_block = (-1);
2975 } else {
2976 if (arg > 0 && undone < 0) /* Some drives get this wrong */
2977 undone = (-undone);
2978 if (STps->drv_block >= 0)
2979 STps->drv_block = blkno + undone;
2980 }
2981 STps->eof = ST_NOEOF;
2982 } else if (cmd_in == MTEOM) {
2983 STps->drv_file = (-1);
2984 STps->drv_block = (-1);
2985 STps->eof = ST_EOD;
2986 } else if (cmd_in == MTSETBLK ||
2987 cmd_in == MTSETDENSITY ||
2988 cmd_in == MTSETDRVBUFFER ||
2989 cmd_in == SET_DENS_AND_BLK) {
2990 if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST &&
2991 !(STp->use_pf & PF_TESTED)) {
2992 /* Try the other possible state of Page Format if not
2993 already tried */
2994 STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
2995 st_release_request(SRpnt);
2996 SRpnt = NULL;
2997 return st_int_ioctl(STp, cmd_in, arg);
2998 }
2999 } else if (chg_eof)
3000 STps->eof = ST_NOEOF;
3001
3002 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
3003 STps->eof = ST_EOD;
3004
3005 st_release_request(SRpnt);
3006 SRpnt = NULL;
3007 }
3008
3009 return ioctl_result;
3010}
3011
3012
3013/* Get the tape position. If bt == 2, arg points into a kernel space mt_loc
3014 structure. */
3015
3016static int get_location(struct scsi_tape *STp, unsigned int *block, int *partition,
3017 int logical)
3018{
3019 int result;
3020 unsigned char scmd[MAX_COMMAND_SIZE];
3021 struct st_request *SRpnt;
3022 DEB( char *name = tape_name(STp); )
3023
3024 if (STp->ready != ST_READY)
3025 return (-EIO);
3026
3027 memset(scmd, 0, MAX_COMMAND_SIZE);
3028 if ((STp->device)->scsi_level < SCSI_2) {
3029 scmd[0] = QFA_REQUEST_BLOCK;
3030 scmd[4] = 3;
3031 } else {
3032 scmd[0] = READ_POSITION;
3033 if (!logical && !STp->scsi2_logical)
3034 scmd[1] = 1;
3035 }
3036 SRpnt = st_do_scsi(NULL, STp, scmd, 20, DMA_FROM_DEVICE,
3037 STp->device->request_queue->rq_timeout,
3038 MAX_READY_RETRIES, 1);
3039 if (!SRpnt)
3040 return (STp->buffer)->syscall_result;
3041
3042 if ((STp->buffer)->syscall_result != 0 ||
3043 (STp->device->scsi_level >= SCSI_2 &&
3044 ((STp->buffer)->b_data[0] & 4) != 0)) {
3045 *block = *partition = 0;
3046 DEBC(printk(ST_DEB_MSG "%s: Can't read tape position.\n", name));
3047 result = (-EIO);
3048 } else {
3049 result = 0;
3050 if ((STp->device)->scsi_level < SCSI_2) {
3051 *block = ((STp->buffer)->b_data[0] << 16)
3052 + ((STp->buffer)->b_data[1] << 8)
3053 + (STp->buffer)->b_data[2];
3054 *partition = 0;
3055 } else {
3056 *block = ((STp->buffer)->b_data[4] << 24)
3057 + ((STp->buffer)->b_data[5] << 16)
3058 + ((STp->buffer)->b_data[6] << 8)
3059 + (STp->buffer)->b_data[7];
3060 *partition = (STp->buffer)->b_data[1];
3061 if (((STp->buffer)->b_data[0] & 0x80) &&
3062 (STp->buffer)->b_data[1] == 0) /* BOP of partition 0 */
3063 STp->ps[0].drv_block = STp->ps[0].drv_file = 0;
3064 }
3065 DEBC(printk(ST_DEB_MSG "%s: Got tape pos. blk %d part %d.\n", name,
3066 *block, *partition));
3067 }
3068 st_release_request(SRpnt);
3069 SRpnt = NULL;
3070
3071 return result;
3072}
3073
3074
3075/* Set the tape block and partition. Negative partition means that only the
3076 block should be set in vendor specific way. */
3077static int set_location(struct scsi_tape *STp, unsigned int block, int partition,
3078 int logical)
3079{
3080 struct st_partstat *STps;
3081 int result, p;
3082 unsigned int blk;
3083 int timeout;
3084 unsigned char scmd[MAX_COMMAND_SIZE];
3085 struct st_request *SRpnt;
3086 DEB( char *name = tape_name(STp); )
3087
3088 if (STp->ready != ST_READY)
3089 return (-EIO);
3090 timeout = STp->long_timeout;
3091 STps = &(STp->ps[STp->partition]);
3092
3093 DEBC(printk(ST_DEB_MSG "%s: Setting block to %d and partition to %d.\n",
3094 name, block, partition));
3095 DEB(if (partition < 0)
3096 return (-EIO); )
3097
3098 /* Update the location at the partition we are leaving */
3099 if ((!STp->can_partitions && partition != 0) ||
3100 partition >= ST_NBR_PARTITIONS)
3101 return (-EINVAL);
3102 if (partition != STp->partition) {
3103 if (get_location(STp, &blk, &p, 1))
3104 STps->last_block_valid = 0;
3105 else {
3106 STps->last_block_valid = 1;
3107 STps->last_block_visited = blk;
3108 DEBC(printk(ST_DEB_MSG
3109 "%s: Visited block %d for partition %d saved.\n",
3110 name, blk, STp->partition));
3111 }
3112 }
3113
3114 memset(scmd, 0, MAX_COMMAND_SIZE);
3115 if ((STp->device)->scsi_level < SCSI_2) {
3116 scmd[0] = QFA_SEEK_BLOCK;
3117 scmd[2] = (block >> 16);
3118 scmd[3] = (block >> 8);
3119 scmd[4] = block;
3120 scmd[5] = 0;
3121 } else {
3122 scmd[0] = SEEK_10;
3123 scmd[3] = (block >> 24);
3124 scmd[4] = (block >> 16);
3125 scmd[5] = (block >> 8);
3126 scmd[6] = block;
3127 if (!logical && !STp->scsi2_logical)
3128 scmd[1] = 4;
3129 if (STp->partition != partition) {
3130 scmd[1] |= 2;
3131 scmd[8] = partition;
3132 DEBC(printk(ST_DEB_MSG
3133 "%s: Trying to change partition from %d to %d\n",
3134 name, STp->partition, partition));
3135 }
3136 }
3137 if (STp->immediate) {
3138 scmd[1] |= 1; /* Don't wait for completion */
3139 timeout = STp->device->request_queue->rq_timeout;
3140 }
3141
3142 SRpnt = st_do_scsi(NULL, STp, scmd, 0, DMA_NONE,
3143 timeout, MAX_READY_RETRIES, 1);
3144 if (!SRpnt)
3145 return (STp->buffer)->syscall_result;
3146
3147 STps->drv_block = STps->drv_file = (-1);
3148 STps->eof = ST_NOEOF;
3149 if ((STp->buffer)->syscall_result != 0) {
3150 result = (-EIO);
3151 if (STp->can_partitions &&
3152 (STp->device)->scsi_level >= SCSI_2 &&
3153 (p = find_partition(STp)) >= 0)
3154 STp->partition = p;
3155 } else {
3156 if (STp->can_partitions) {
3157 STp->partition = partition;
3158 STps = &(STp->ps[partition]);
3159 if (!STps->last_block_valid ||
3160 STps->last_block_visited != block) {
3161 STps->at_sm = 0;
3162 STps->rw = ST_IDLE;
3163 }
3164 } else
3165 STps->at_sm = 0;
3166 if (block == 0)
3167 STps->drv_block = STps->drv_file = 0;
3168 result = 0;
3169 }
3170
3171 st_release_request(SRpnt);
3172 SRpnt = NULL;
3173
3174 return result;
3175}
3176
3177
3178/* Find the current partition number for the drive status. Called from open and
3179 returns either partition number of negative error code. */
3180static int find_partition(struct scsi_tape *STp)
3181{
3182 int i, partition;
3183 unsigned int block;
3184
3185 if ((i = get_location(STp, &block, &partition, 1)) < 0)
3186 return i;
3187 if (partition >= ST_NBR_PARTITIONS)
3188 return (-EIO);
3189 return partition;
3190}
3191
3192
3193/* Change the partition if necessary */
3194static int switch_partition(struct scsi_tape *STp)
3195{
3196 struct st_partstat *STps;
3197
3198 if (STp->partition == STp->new_partition)
3199 return 0;
3200 STps = &(STp->ps[STp->new_partition]);
3201 if (!STps->last_block_valid)
3202 STps->last_block_visited = 0;
3203 return set_location(STp, STps->last_block_visited, STp->new_partition, 1);
3204}
3205
3206/* Functions for reading and writing the medium partition mode page. */
3207
3208#define PART_PAGE 0x11
3209#define PART_PAGE_FIXED_LENGTH 8
3210
3211#define PP_OFF_MAX_ADD_PARTS 2
3212#define PP_OFF_NBR_ADD_PARTS 3
3213#define PP_OFF_FLAGS 4
3214#define PP_OFF_PART_UNITS 6
3215#define PP_OFF_RESERVED 7
3216
3217#define PP_BIT_IDP 0x20
3218#define PP_MSK_PSUM_MB 0x10
3219
3220/* Get the number of partitions on the tape. As a side effect reads the
3221 mode page into the tape buffer. */
3222static int nbr_partitions(struct scsi_tape *STp)
3223{
3224 int result;
3225 DEB( char *name = tape_name(STp); )
3226
3227 if (STp->ready != ST_READY)
3228 return (-EIO);
3229
3230 result = read_mode_page(STp, PART_PAGE, 1);
3231
3232 if (result) {
3233 DEBC(printk(ST_DEB_MSG "%s: Can't read medium partition page.\n",
3234 name));
3235 result = (-EIO);
3236 } else {
3237 result = (STp->buffer)->b_data[MODE_HEADER_LENGTH +
3238 PP_OFF_NBR_ADD_PARTS] + 1;
3239 DEBC(printk(ST_DEB_MSG "%s: Number of partitions %d.\n", name, result));
3240 }
3241
3242 return result;
3243}
3244
3245
3246/* Partition the tape into two partitions if size > 0 or one partition if
3247 size == 0.
3248
3249 The block descriptors are read and written because Sony SDT-7000 does not
3250 work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
3251
3252 My HP C1533A drive returns only one partition size field. This is used to
3253 set the size of partition 1. There is no size field for the default partition.
3254 Michael Schaefer's Sony SDT-7000 returns two descriptors and the second is
3255 used to set the size of partition 1 (this is what the SCSI-3 standard specifies).
3256 The following algorithm is used to accommodate both drives: if the number of
3257 partition size fields is greater than the maximum number of additional partitions
3258 in the mode page, the second field is used. Otherwise the first field is used.
3259
3260 For Seagate DDS drives the page length must be 8 when no partitions is defined
3261 and 10 when 1 partition is defined (information from Eric Lee Green). This is
3262 is acceptable also to some other old drives and enforced if the first partition
3263 size field is used for the first additional partition size.
3264 */
3265static int partition_tape(struct scsi_tape *STp, int size)
3266{
3267 char *name = tape_name(STp);
3268 int result;
3269 int pgo, psd_cnt, psdo;
3270 unsigned char *bp;
3271
3272 result = read_mode_page(STp, PART_PAGE, 0);
3273 if (result) {
3274 DEBC(printk(ST_DEB_MSG "%s: Can't read partition mode page.\n", name));
3275 return result;
3276 }
3277 /* The mode page is in the buffer. Let's modify it and write it. */
3278 bp = (STp->buffer)->b_data;
3279 pgo = MODE_HEADER_LENGTH + bp[MH_OFF_BDESCS_LENGTH];
3280 DEBC(printk(ST_DEB_MSG "%s: Partition page length is %d bytes.\n",
3281 name, bp[pgo + MP_OFF_PAGE_LENGTH] + 2));
3282
3283 psd_cnt = (bp[pgo + MP_OFF_PAGE_LENGTH] + 2 - PART_PAGE_FIXED_LENGTH) / 2;
3284 psdo = pgo + PART_PAGE_FIXED_LENGTH;
3285 if (psd_cnt > bp[pgo + PP_OFF_MAX_ADD_PARTS]) {
3286 bp[psdo] = bp[psdo + 1] = 0xff; /* Rest of the tape */
3287 psdo += 2;
3288 }
3289 memset(bp + psdo, 0, bp[pgo + PP_OFF_NBR_ADD_PARTS] * 2);
3290
3291 DEBC(printk("%s: psd_cnt %d, max.parts %d, nbr_parts %d\n", name,
3292 psd_cnt, bp[pgo + PP_OFF_MAX_ADD_PARTS],
3293 bp[pgo + PP_OFF_NBR_ADD_PARTS]));
3294
3295 if (size <= 0) {
3296 bp[pgo + PP_OFF_NBR_ADD_PARTS] = 0;
3297 if (psd_cnt <= bp[pgo + PP_OFF_MAX_ADD_PARTS])
3298 bp[pgo + MP_OFF_PAGE_LENGTH] = 6;
3299 DEBC(printk(ST_DEB_MSG "%s: Formatting tape with one partition.\n",
3300 name));
3301 } else {
3302 bp[psdo] = (size >> 8) & 0xff;
3303 bp[psdo + 1] = size & 0xff;
3304 bp[pgo + 3] = 1;
3305 if (bp[pgo + MP_OFF_PAGE_LENGTH] < 8)
3306 bp[pgo + MP_OFF_PAGE_LENGTH] = 8;
3307 DEBC(printk(ST_DEB_MSG
3308 "%s: Formatting tape with two partitions (1 = %d MB).\n",
3309 name, size));
3310 }
3311 bp[pgo + PP_OFF_PART_UNITS] = 0;
3312 bp[pgo + PP_OFF_RESERVED] = 0;
3313 bp[pgo + PP_OFF_FLAGS] = PP_BIT_IDP | PP_MSK_PSUM_MB;
3314
3315 result = write_mode_page(STp, PART_PAGE, 1);
3316 if (result) {
3317 printk(KERN_INFO "%s: Partitioning of tape failed.\n", name);
3318 result = (-EIO);
3319 }
3320
3321 return result;
3322}
3323
3324
3325
3326/* The ioctl command */
3327static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3328{
3329 int i, cmd_nr, cmd_type, bt;
3330 int retval = 0;
3331 unsigned int blk;
3332 struct scsi_tape *STp = file->private_data;
3333 struct st_modedef *STm;
3334 struct st_partstat *STps;
3335 char *name = tape_name(STp);
3336 void __user *p = (void __user *)arg;
3337
3338 if (mutex_lock_interruptible(&STp->lock))
3339 return -ERESTARTSYS;
3340
3341 DEB(
3342 if (debugging && !STp->in_use) {
3343 printk(ST_DEB_MSG "%s: Incorrect device.\n", name);
3344 retval = (-EIO);
3345 goto out;
3346 } ) /* end DEB */
3347
3348 STm = &(STp->modes[STp->current_mode]);
3349 STps = &(STp->ps[STp->partition]);
3350
3351 /*
3352 * If we are in the middle of error recovery, don't let anyone
3353 * else try and use this device. Also, if error recovery fails, it
3354 * may try and take the device offline, in which case all further
3355 * access to the device is prohibited.
3356 */
3357 retval = scsi_nonblockable_ioctl(STp->device, cmd_in, p,
3358 file->f_flags & O_NDELAY);
3359 if (!scsi_block_when_processing_errors(STp->device) || retval != -ENODEV)
3360 goto out;
3361 retval = 0;
3362
3363 cmd_type = _IOC_TYPE(cmd_in);
3364 cmd_nr = _IOC_NR(cmd_in);
3365
3366 if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
3367 struct mtop mtc;
3368
3369 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
3370 retval = (-EINVAL);
3371 goto out;
3372 }
3373
3374 i = copy_from_user(&mtc, p, sizeof(struct mtop));
3375 if (i) {
3376 retval = (-EFAULT);
3377 goto out;
3378 }
3379
3380 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
3381 printk(KERN_WARNING
3382 "%s: MTSETDRVBUFFER only allowed for root.\n", name);
3383 retval = (-EPERM);
3384 goto out;
3385 }
3386 if (!STm->defined &&
3387 (mtc.mt_op != MTSETDRVBUFFER &&
3388 (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
3389 retval = (-ENXIO);
3390 goto out;
3391 }
3392
3393 if (!STp->pos_unknown) {
3394
3395 if (STps->eof == ST_FM_HIT) {
3396 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3397 mtc.mt_op == MTEOM) {
3398 mtc.mt_count -= 1;
3399 if (STps->drv_file >= 0)
3400 STps->drv_file += 1;
3401 } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
3402 mtc.mt_count += 1;
3403 if (STps->drv_file >= 0)
3404 STps->drv_file += 1;
3405 }
3406 }
3407
3408 if (mtc.mt_op == MTSEEK) {
3409 /* Old position must be restored if partition will be
3410 changed */
3411 i = !STp->can_partitions ||
3412 (STp->new_partition != STp->partition);
3413 } else {
3414 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3415 mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
3416 mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
3417 mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3418 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
3419 mtc.mt_op == MTCOMPRESSION;
3420 }
3421 i = flush_buffer(STp, i);
3422 if (i < 0) {
3423 retval = i;
3424 goto out;
3425 }
3426 if (STps->rw == ST_WRITING &&
3427 (mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3428 mtc.mt_op == MTSEEK ||
3429 mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)) {
3430 i = st_int_ioctl(STp, MTWEOF, 1);
3431 if (i < 0) {
3432 retval = i;
3433 goto out;
3434 }
3435 if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)
3436 mtc.mt_count++;
3437 STps->rw = ST_IDLE;
3438 }
3439
3440 } else {
3441 /*
3442 * If there was a bus reset, block further access
3443 * to this device. If the user wants to rewind the tape,
3444 * then reset the flag and allow access again.
3445 */
3446 if (mtc.mt_op != MTREW &&
3447 mtc.mt_op != MTOFFL &&
3448 mtc.mt_op != MTRETEN &&
3449 mtc.mt_op != MTERASE &&
3450 mtc.mt_op != MTSEEK &&
3451 mtc.mt_op != MTEOM) {
3452 retval = (-EIO);
3453 goto out;
3454 }
3455 reset_state(STp);
3456 /* remove this when the midlevel properly clears was_reset */
3457 STp->device->was_reset = 0;
3458 }
3459
3460 if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
3461 mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTWSM &&
3462 mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART)
3463 STps->rw = ST_IDLE; /* Prevent automatic WEOF and fsf */
3464
3465 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
3466 do_door_lock(STp, 0); /* Ignore result! */
3467
3468 if (mtc.mt_op == MTSETDRVBUFFER &&
3469 (mtc.mt_count & MT_ST_OPTIONS) != 0) {
3470 retval = st_set_options(STp, mtc.mt_count);
3471 goto out;
3472 }
3473
3474 if (mtc.mt_op == MTSETPART) {
3475 if (!STp->can_partitions ||
3476 mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) {
3477 retval = (-EINVAL);
3478 goto out;
3479 }
3480 if (mtc.mt_count >= STp->nbr_partitions &&
3481 (STp->nbr_partitions = nbr_partitions(STp)) < 0) {
3482 retval = (-EIO);
3483 goto out;
3484 }
3485 if (mtc.mt_count >= STp->nbr_partitions) {
3486 retval = (-EINVAL);
3487 goto out;
3488 }
3489 STp->new_partition = mtc.mt_count;
3490 retval = 0;
3491 goto out;
3492 }
3493
3494 if (mtc.mt_op == MTMKPART) {
3495 if (!STp->can_partitions) {
3496 retval = (-EINVAL);
3497 goto out;
3498 }
3499 if ((i = st_int_ioctl(STp, MTREW, 0)) < 0 ||
3500 (i = partition_tape(STp, mtc.mt_count)) < 0) {
3501 retval = i;
3502 goto out;
3503 }
3504 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
3505 STp->ps[i].rw = ST_IDLE;
3506 STp->ps[i].at_sm = 0;
3507 STp->ps[i].last_block_valid = 0;
3508 }
3509 STp->partition = STp->new_partition = 0;
3510 STp->nbr_partitions = 1; /* Bad guess ?-) */
3511 STps->drv_block = STps->drv_file = 0;
3512 retval = 0;
3513 goto out;
3514 }
3515
3516 if (mtc.mt_op == MTSEEK) {
3517 i = set_location(STp, mtc.mt_count, STp->new_partition, 0);
3518 if (!STp->can_partitions)
3519 STp->ps[0].rw = ST_IDLE;
3520 retval = i;
3521 goto out;
3522 }
3523
3524 if (mtc.mt_op == MTUNLOAD || mtc.mt_op == MTOFFL) {
3525 retval = do_load_unload(STp, file, 0);
3526 goto out;
3527 }
3528
3529 if (mtc.mt_op == MTLOAD) {
3530 retval = do_load_unload(STp, file, max(1, mtc.mt_count));
3531 goto out;
3532 }
3533
3534 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
3535 retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
3536 goto out;
3537 }
3538
3539 if (STp->can_partitions && STp->ready == ST_READY &&
3540 (i = switch_partition(STp)) < 0) {
3541 retval = i;
3542 goto out;
3543 }
3544
3545 if (mtc.mt_op == MTCOMPRESSION)
3546 retval = st_compression(STp, (mtc.mt_count & 1));
3547 else
3548 retval = st_int_ioctl(STp, mtc.mt_op, mtc.mt_count);
3549 goto out;
3550 }
3551 if (!STm->defined) {
3552 retval = (-ENXIO);
3553 goto out;
3554 }
3555
3556 if ((i = flush_buffer(STp, 0)) < 0) {
3557 retval = i;
3558 goto out;
3559 }
3560 if (STp->can_partitions &&
3561 (i = switch_partition(STp)) < 0) {
3562 retval = i;
3563 goto out;
3564 }
3565
3566 if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
3567 struct mtget mt_status;
3568
3569 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
3570 retval = (-EINVAL);
3571 goto out;
3572 }
3573
3574 mt_status.mt_type = STp->tape_type;
3575 mt_status.mt_dsreg =
3576 ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
3577 ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
3578 mt_status.mt_blkno = STps->drv_block;
3579 mt_status.mt_fileno = STps->drv_file;
3580 if (STp->block_size != 0) {
3581 if (STps->rw == ST_WRITING)
3582 mt_status.mt_blkno +=
3583 (STp->buffer)->buffer_bytes / STp->block_size;
3584 else if (STps->rw == ST_READING)
3585 mt_status.mt_blkno -=
3586 ((STp->buffer)->buffer_bytes +
3587 STp->block_size - 1) / STp->block_size;
3588 }
3589
3590 mt_status.mt_gstat = 0;
3591 if (STp->drv_write_prot)
3592 mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
3593 if (mt_status.mt_blkno == 0) {
3594 if (mt_status.mt_fileno == 0)
3595 mt_status.mt_gstat |= GMT_BOT(0xffffffff);
3596 else
3597 mt_status.mt_gstat |= GMT_EOF(0xffffffff);
3598 }
3599 mt_status.mt_erreg = (STp->recover_reg << MT_ST_SOFTERR_SHIFT);
3600 mt_status.mt_resid = STp->partition;
3601 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
3602 mt_status.mt_gstat |= GMT_EOT(0xffffffff);
3603 else if (STps->eof >= ST_EOM_OK)
3604 mt_status.mt_gstat |= GMT_EOD(0xffffffff);
3605 if (STp->density == 1)
3606 mt_status.mt_gstat |= GMT_D_800(0xffffffff);
3607 else if (STp->density == 2)
3608 mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
3609 else if (STp->density == 3)
3610 mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
3611 if (STp->ready == ST_READY)
3612 mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
3613 if (STp->ready == ST_NO_TAPE)
3614 mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
3615 if (STps->at_sm)
3616 mt_status.mt_gstat |= GMT_SM(0xffffffff);
3617 if (STm->do_async_writes ||
3618 (STm->do_buffer_writes && STp->block_size != 0) ||
3619 STp->drv_buffer != 0)
3620 mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
3621 if (STp->cleaning_req)
3622 mt_status.mt_gstat |= GMT_CLN(0xffffffff);
3623
3624 i = copy_to_user(p, &mt_status, sizeof(struct mtget));
3625 if (i) {
3626 retval = (-EFAULT);
3627 goto out;
3628 }
3629
3630 STp->recover_reg = 0; /* Clear after read */
3631 retval = 0;
3632 goto out;
3633 } /* End of MTIOCGET */
3634 if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
3635 struct mtpos mt_pos;
3636 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
3637 retval = (-EINVAL);
3638 goto out;
3639 }
3640 if ((i = get_location(STp, &blk, &bt, 0)) < 0) {
3641 retval = i;
3642 goto out;
3643 }
3644 mt_pos.mt_blkno = blk;
3645 i = copy_to_user(p, &mt_pos, sizeof(struct mtpos));
3646 if (i)
3647 retval = (-EFAULT);
3648 goto out;
3649 }
3650 mutex_unlock(&STp->lock);
3651 switch (cmd_in) {
3652 case SCSI_IOCTL_GET_IDLUN:
3653 case SCSI_IOCTL_GET_BUS_NUMBER:
3654 break;
3655 default:
3656 if ((cmd_in == SG_IO ||
3657 cmd_in == SCSI_IOCTL_SEND_COMMAND ||
3658 cmd_in == CDROM_SEND_PACKET) &&
3659 !capable(CAP_SYS_RAWIO))
3660 i = -EPERM;
3661 else
3662 i = scsi_cmd_ioctl(STp->disk->queue, STp->disk,
3663 file->f_mode, cmd_in, p);
3664 if (i != -ENOTTY)
3665 return i;
3666 break;
3667 }
3668 retval = scsi_ioctl(STp->device, cmd_in, p);
3669 if (!retval && cmd_in == SCSI_IOCTL_STOP_UNIT) { /* unload */
3670 STp->rew_at_close = 0;
3671 STp->ready = ST_NO_TAPE;
3672 }
3673 return retval;
3674
3675 out:
3676 mutex_unlock(&STp->lock);
3677 return retval;
3678}
3679
3680#ifdef CONFIG_COMPAT
3681static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
3682{
3683 struct scsi_tape *STp = file->private_data;
3684 struct scsi_device *sdev = STp->device;
3685 int ret = -ENOIOCTLCMD;
3686 if (sdev->host->hostt->compat_ioctl) {
3687
3688 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
3689
3690 }
3691 return ret;
3692}
3693#endif
3694
3695
3696
3697/* Try to allocate a new tape buffer. Calling function must not hold
3698 dev_arr_lock. */
3699static struct st_buffer *new_tape_buffer(int need_dma, int max_sg)
3700{
3701 struct st_buffer *tb;
3702
3703 tb = kzalloc(sizeof(struct st_buffer), GFP_ATOMIC);
3704 if (!tb) {
3705 printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
3706 return NULL;
3707 }
3708 tb->frp_segs = 0;
3709 tb->use_sg = max_sg;
3710 tb->dma = need_dma;
3711 tb->buffer_size = 0;
3712
3713 tb->reserved_pages = kzalloc(max_sg * sizeof(struct page *),
3714 GFP_ATOMIC);
3715 if (!tb->reserved_pages) {
3716 kfree(tb);
3717 return NULL;
3718 }
3719
3720 return tb;
3721}
3722
3723
3724/* Try to allocate enough space in the tape buffer */
3725#define ST_MAX_ORDER 6
3726
3727static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma)
3728{
3729 int segs, nbr, max_segs, b_size, order, got;
3730 gfp_t priority;
3731
3732 if (new_size <= STbuffer->buffer_size)
3733 return 1;
3734
3735 if (STbuffer->buffer_size <= PAGE_SIZE)
3736 normalize_buffer(STbuffer); /* Avoid extra segment */
3737
3738 max_segs = STbuffer->use_sg;
3739 nbr = max_segs - STbuffer->frp_segs;
3740 if (nbr <= 0)
3741 return 0;
3742
3743 priority = GFP_KERNEL | __GFP_NOWARN;
3744 if (need_dma)
3745 priority |= GFP_DMA;
3746
3747 if (STbuffer->cleared)
3748 priority |= __GFP_ZERO;
3749
3750 if (STbuffer->frp_segs) {
3751 order = STbuffer->reserved_page_order;
3752 b_size = PAGE_SIZE << order;
3753 } else {
3754 for (b_size = PAGE_SIZE, order = 0;
3755 order < ST_MAX_ORDER &&
3756 max_segs * (PAGE_SIZE << order) < new_size;
3757 order++, b_size *= 2)
3758 ; /* empty */
3759 STbuffer->reserved_page_order = order;
3760 }
3761 if (max_segs * (PAGE_SIZE << order) < new_size) {
3762 if (order == ST_MAX_ORDER)
3763 return 0;
3764 normalize_buffer(STbuffer);
3765 return enlarge_buffer(STbuffer, new_size, need_dma);
3766 }
3767
3768 for (segs = STbuffer->frp_segs, got = STbuffer->buffer_size;
3769 segs < max_segs && got < new_size;) {
3770 struct page *page;
3771
3772 page = alloc_pages(priority, order);
3773 if (!page) {
3774 DEB(STbuffer->buffer_size = got);
3775 normalize_buffer(STbuffer);
3776 return 0;
3777 }
3778
3779 STbuffer->frp_segs += 1;
3780 got += b_size;
3781 STbuffer->buffer_size = got;
3782 STbuffer->reserved_pages[segs] = page;
3783 segs++;
3784 }
3785 STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
3786
3787 return 1;
3788}
3789
3790
3791/* Make sure that no data from previous user is in the internal buffer */
3792static void clear_buffer(struct st_buffer * st_bp)
3793{
3794 int i;
3795
3796 for (i=0; i < st_bp->frp_segs; i++)
3797 memset(page_address(st_bp->reserved_pages[i]), 0,
3798 PAGE_SIZE << st_bp->reserved_page_order);
3799 st_bp->cleared = 1;
3800}
3801
3802
3803/* Release the extra buffer */
3804static void normalize_buffer(struct st_buffer * STbuffer)
3805{
3806 int i, order = STbuffer->reserved_page_order;
3807
3808 for (i = 0; i < STbuffer->frp_segs; i++) {
3809 __free_pages(STbuffer->reserved_pages[i], order);
3810 STbuffer->buffer_size -= (PAGE_SIZE << order);
3811 }
3812 STbuffer->frp_segs = 0;
3813 STbuffer->sg_segs = 0;
3814 STbuffer->reserved_page_order = 0;
3815 STbuffer->map_data.offset = 0;
3816}
3817
3818
3819/* Move data from the user buffer to the tape buffer. Returns zero (success) or
3820 negative error code. */
3821static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count)
3822{
3823 int i, cnt, res, offset;
3824 int length = PAGE_SIZE << st_bp->reserved_page_order;
3825
3826 for (i = 0, offset = st_bp->buffer_bytes;
3827 i < st_bp->frp_segs && offset >= length; i++)
3828 offset -= length;
3829 if (i == st_bp->frp_segs) { /* Should never happen */
3830 printk(KERN_WARNING "st: append_to_buffer offset overflow.\n");
3831 return (-EIO);
3832 }
3833 for (; i < st_bp->frp_segs && do_count > 0; i++) {
3834 struct page *page = st_bp->reserved_pages[i];
3835 cnt = length - offset < do_count ? length - offset : do_count;
3836 res = copy_from_user(page_address(page) + offset, ubp, cnt);
3837 if (res)
3838 return (-EFAULT);
3839 do_count -= cnt;
3840 st_bp->buffer_bytes += cnt;
3841 ubp += cnt;
3842 offset = 0;
3843 }
3844 if (do_count) /* Should never happen */
3845 return (-EIO);
3846
3847 return 0;
3848}
3849
3850
3851/* Move data from the tape buffer to the user buffer. Returns zero (success) or
3852 negative error code. */
3853static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count)
3854{
3855 int i, cnt, res, offset;
3856 int length = PAGE_SIZE << st_bp->reserved_page_order;
3857
3858 for (i = 0, offset = st_bp->read_pointer;
3859 i < st_bp->frp_segs && offset >= length; i++)
3860 offset -= length;
3861 if (i == st_bp->frp_segs) { /* Should never happen */
3862 printk(KERN_WARNING "st: from_buffer offset overflow.\n");
3863 return (-EIO);
3864 }
3865 for (; i < st_bp->frp_segs && do_count > 0; i++) {
3866 struct page *page = st_bp->reserved_pages[i];
3867 cnt = length - offset < do_count ? length - offset : do_count;
3868 res = copy_to_user(ubp, page_address(page) + offset, cnt);
3869 if (res)
3870 return (-EFAULT);
3871 do_count -= cnt;
3872 st_bp->buffer_bytes -= cnt;
3873 st_bp->read_pointer += cnt;
3874 ubp += cnt;
3875 offset = 0;
3876 }
3877 if (do_count) /* Should never happen */
3878 return (-EIO);
3879
3880 return 0;
3881}
3882
3883
3884/* Move data towards start of buffer */
3885static void move_buffer_data(struct st_buffer * st_bp, int offset)
3886{
3887 int src_seg, dst_seg, src_offset = 0, dst_offset;
3888 int count, total;
3889 int length = PAGE_SIZE << st_bp->reserved_page_order;
3890
3891 if (offset == 0)
3892 return;
3893
3894 total=st_bp->buffer_bytes - offset;
3895 for (src_seg=0; src_seg < st_bp->frp_segs; src_seg++) {
3896 src_offset = offset;
3897 if (src_offset < length)
3898 break;
3899 offset -= length;
3900 }
3901
3902 st_bp->buffer_bytes = st_bp->read_pointer = total;
3903 for (dst_seg=dst_offset=0; total > 0; ) {
3904 struct page *dpage = st_bp->reserved_pages[dst_seg];
3905 struct page *spage = st_bp->reserved_pages[src_seg];
3906
3907 count = min(length - dst_offset, length - src_offset);
3908 memmove(page_address(dpage) + dst_offset,
3909 page_address(spage) + src_offset, count);
3910 src_offset += count;
3911 if (src_offset >= length) {
3912 src_seg++;
3913 src_offset = 0;
3914 }
3915 dst_offset += count;
3916 if (dst_offset >= length) {
3917 dst_seg++;
3918 dst_offset = 0;
3919 }
3920 total -= count;
3921 }
3922}
3923
3924/* Validate the options from command line or module parameters */
3925static void validate_options(void)
3926{
3927 if (buffer_kbs > 0)
3928 st_fixed_buffer_size = buffer_kbs * ST_KILOBYTE;
3929 if (max_sg_segs >= ST_FIRST_SG)
3930 st_max_sg_segs = max_sg_segs;
3931}
3932
3933#ifndef MODULE
3934/* Set the boot options. Syntax is defined in Documenation/scsi/st.txt.
3935 */
3936static int __init st_setup(char *str)
3937{
3938 int i, len, ints[5];
3939 char *stp;
3940
3941 stp = get_options(str, ARRAY_SIZE(ints), ints);
3942
3943 if (ints[0] > 0) {
3944 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
3945 if (parms[i].val)
3946 *parms[i].val = ints[i + 1];
3947 } else {
3948 while (stp != NULL) {
3949 for (i = 0; i < ARRAY_SIZE(parms); i++) {
3950 len = strlen(parms[i].name);
3951 if (!strncmp(stp, parms[i].name, len) &&
3952 (*(stp + len) == ':' || *(stp + len) == '=')) {
3953 if (parms[i].val)
3954 *parms[i].val =
3955 simple_strtoul(stp + len + 1, NULL, 0);
3956 else
3957 printk(KERN_WARNING "st: Obsolete parameter %s\n",
3958 parms[i].name);
3959 break;
3960 }
3961 }
3962 if (i >= ARRAY_SIZE(parms))
3963 printk(KERN_WARNING "st: invalid parameter in '%s'\n",
3964 stp);
3965 stp = strchr(stp, ',');
3966 if (stp)
3967 stp++;
3968 }
3969 }
3970
3971 validate_options();
3972
3973 return 1;
3974}
3975
3976__setup("st=", st_setup);
3977
3978#endif
3979
3980static const struct file_operations st_fops =
3981{
3982 .owner = THIS_MODULE,
3983 .read = st_read,
3984 .write = st_write,
3985 .unlocked_ioctl = st_ioctl,
3986#ifdef CONFIG_COMPAT
3987 .compat_ioctl = st_compat_ioctl,
3988#endif
3989 .open = st_open,
3990 .flush = st_flush,
3991 .release = st_release,
3992 .llseek = noop_llseek,
3993};
3994
3995static int st_probe(struct device *dev)
3996{
3997 struct scsi_device *SDp = to_scsi_device(dev);
3998 struct gendisk *disk = NULL;
3999 struct cdev *cdev = NULL;
4000 struct scsi_tape *tpnt = NULL;
4001 struct st_modedef *STm;
4002 struct st_partstat *STps;
4003 struct st_buffer *buffer;
4004 int i, j, mode, dev_num, error;
4005 char *stp;
4006
4007 if (SDp->type != TYPE_TAPE)
4008 return -ENODEV;
4009 if ((stp = st_incompatible(SDp))) {
4010 sdev_printk(KERN_INFO, SDp, "Found incompatible tape\n");
4011 printk(KERN_INFO "st: The suggested driver is %s.\n", stp);
4012 return -ENODEV;
4013 }
4014
4015 i = queue_max_segments(SDp->request_queue);
4016 if (st_max_sg_segs < i)
4017 i = st_max_sg_segs;
4018 buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i);
4019 if (buffer == NULL) {
4020 printk(KERN_ERR
4021 "st: Can't allocate new tape buffer. Device not attached.\n");
4022 goto out;
4023 }
4024
4025 disk = alloc_disk(1);
4026 if (!disk) {
4027 printk(KERN_ERR "st: out of memory. Device not attached.\n");
4028 goto out_buffer_free;
4029 }
4030
4031 write_lock(&st_dev_arr_lock);
4032 if (st_nr_dev >= st_dev_max) {
4033 struct scsi_tape **tmp_da;
4034 int tmp_dev_max;
4035
4036 tmp_dev_max = max(st_nr_dev * 2, 8);
4037 if (tmp_dev_max > ST_MAX_TAPES)
4038 tmp_dev_max = ST_MAX_TAPES;
4039 if (tmp_dev_max <= st_nr_dev) {
4040 write_unlock(&st_dev_arr_lock);
4041 printk(KERN_ERR "st: Too many tape devices (max. %d).\n",
4042 ST_MAX_TAPES);
4043 goto out_put_disk;
4044 }
4045
4046 tmp_da = kzalloc(tmp_dev_max * sizeof(struct scsi_tape *), GFP_ATOMIC);
4047 if (tmp_da == NULL) {
4048 write_unlock(&st_dev_arr_lock);
4049 printk(KERN_ERR "st: Can't extend device array.\n");
4050 goto out_put_disk;
4051 }
4052
4053 if (scsi_tapes != NULL) {
4054 memcpy(tmp_da, scsi_tapes,
4055 st_dev_max * sizeof(struct scsi_tape *));
4056 kfree(scsi_tapes);
4057 }
4058 scsi_tapes = tmp_da;
4059
4060 st_dev_max = tmp_dev_max;
4061 }
4062
4063 for (i = 0; i < st_dev_max; i++)
4064 if (scsi_tapes[i] == NULL)
4065 break;
4066 if (i >= st_dev_max)
4067 panic("scsi_devices corrupt (st)");
4068
4069 tpnt = kzalloc(sizeof(struct scsi_tape), GFP_ATOMIC);
4070 if (tpnt == NULL) {
4071 write_unlock(&st_dev_arr_lock);
4072 printk(KERN_ERR "st: Can't allocate device descriptor.\n");
4073 goto out_put_disk;
4074 }
4075 kref_init(&tpnt->kref);
4076 tpnt->disk = disk;
4077 sprintf(disk->disk_name, "st%d", i);
4078 disk->private_data = &tpnt->driver;
4079 disk->queue = SDp->request_queue;
4080 tpnt->driver = &st_template;
4081 scsi_tapes[i] = tpnt;
4082 dev_num = i;
4083
4084 tpnt->device = SDp;
4085 if (SDp->scsi_level <= 2)
4086 tpnt->tape_type = MT_ISSCSI1;
4087 else
4088 tpnt->tape_type = MT_ISSCSI2;
4089
4090 tpnt->buffer = buffer;
4091 tpnt->buffer->last_SRpnt = NULL;
4092
4093 tpnt->inited = 0;
4094 tpnt->dirty = 0;
4095 tpnt->in_use = 0;
4096 tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
4097 tpnt->restr_dma = (SDp->host)->unchecked_isa_dma;
4098 tpnt->use_pf = (SDp->scsi_level >= SCSI_2);
4099 tpnt->density = 0;
4100 tpnt->do_auto_lock = ST_AUTO_LOCK;
4101 tpnt->can_bsr = (SDp->scsi_level > 2 ? 1 : ST_IN_FILE_POS); /* BSR mandatory in SCSI3 */
4102 tpnt->can_partitions = 0;
4103 tpnt->two_fm = ST_TWO_FM;
4104 tpnt->fast_mteom = ST_FAST_MTEOM;
4105 tpnt->scsi2_logical = ST_SCSI2LOGICAL;
4106 tpnt->sili = ST_SILI;
4107 tpnt->immediate = ST_NOWAIT;
4108 tpnt->immediate_filemark = 0;
4109 tpnt->default_drvbuffer = 0xff; /* No forced buffering */
4110 tpnt->partition = 0;
4111 tpnt->new_partition = 0;
4112 tpnt->nbr_partitions = 0;
4113 blk_queue_rq_timeout(tpnt->device->request_queue, ST_TIMEOUT);
4114 tpnt->long_timeout = ST_LONG_TIMEOUT;
4115 tpnt->try_dio = try_direct_io && !SDp->host->unchecked_isa_dma;
4116
4117 for (i = 0; i < ST_NBR_MODES; i++) {
4118 STm = &(tpnt->modes[i]);
4119 STm->defined = 0;
4120 STm->sysv = ST_SYSV;
4121 STm->defaults_for_writes = 0;
4122 STm->do_async_writes = ST_ASYNC_WRITES;
4123 STm->do_buffer_writes = ST_BUFFER_WRITES;
4124 STm->do_read_ahead = ST_READ_AHEAD;
4125 STm->default_compression = ST_DONT_TOUCH;
4126 STm->default_blksize = (-1); /* No forced size */
4127 STm->default_density = (-1); /* No forced density */
4128 }
4129
4130 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
4131 STps = &(tpnt->ps[i]);
4132 STps->rw = ST_IDLE;
4133 STps->eof = ST_NOEOF;
4134 STps->at_sm = 0;
4135 STps->last_block_valid = 0;
4136 STps->drv_block = (-1);
4137 STps->drv_file = (-1);
4138 }
4139
4140 tpnt->current_mode = 0;
4141 tpnt->modes[0].defined = 1;
4142
4143 tpnt->density_changed = tpnt->compression_changed =
4144 tpnt->blksize_changed = 0;
4145 mutex_init(&tpnt->lock);
4146
4147 st_nr_dev++;
4148 write_unlock(&st_dev_arr_lock);
4149
4150 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4151 STm = &(tpnt->modes[mode]);
4152 for (j=0; j < 2; j++) {
4153 cdev = cdev_alloc();
4154 if (!cdev) {
4155 printk(KERN_ERR
4156 "st%d: out of memory. Device not attached.\n",
4157 dev_num);
4158 goto out_free_tape;
4159 }
4160 cdev->owner = THIS_MODULE;
4161 cdev->ops = &st_fops;
4162
4163 error = cdev_add(cdev,
4164 MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, j)),
4165 1);
4166 if (error) {
4167 printk(KERN_ERR "st%d: Can't add %s-rewind mode %d\n",
4168 dev_num, j ? "non" : "auto", mode);
4169 printk(KERN_ERR "st%d: Device not attached.\n", dev_num);
4170 goto out_free_tape;
4171 }
4172 STm->cdevs[j] = cdev;
4173
4174 }
4175 error = do_create_class_files(tpnt, dev_num, mode);
4176 if (error)
4177 goto out_free_tape;
4178 }
4179 scsi_autopm_put_device(SDp);
4180
4181 sdev_printk(KERN_NOTICE, SDp,
4182 "Attached scsi tape %s\n", tape_name(tpnt));
4183 sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n",
4184 tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
4185 queue_dma_alignment(SDp->request_queue) + 1);
4186
4187 return 0;
4188
4189out_free_tape:
4190 for (mode=0; mode < ST_NBR_MODES; mode++) {
4191 STm = &(tpnt->modes[mode]);
4192 sysfs_remove_link(&tpnt->device->sdev_gendev.kobj,
4193 "tape");
4194 for (j=0; j < 2; j++) {
4195 if (STm->cdevs[j]) {
4196 if (cdev == STm->cdevs[j])
4197 cdev = NULL;
4198 device_destroy(st_sysfs_class,
4199 MKDEV(SCSI_TAPE_MAJOR,
4200 TAPE_MINOR(i, mode, j)));
4201 cdev_del(STm->cdevs[j]);
4202 }
4203 }
4204 }
4205 if (cdev)
4206 cdev_del(cdev);
4207 write_lock(&st_dev_arr_lock);
4208 scsi_tapes[dev_num] = NULL;
4209 st_nr_dev--;
4210 write_unlock(&st_dev_arr_lock);
4211out_put_disk:
4212 put_disk(disk);
4213 kfree(tpnt);
4214out_buffer_free:
4215 kfree(buffer);
4216out:
4217 return -ENODEV;
4218};
4219
4220
4221static int st_remove(struct device *dev)
4222{
4223 struct scsi_device *SDp = to_scsi_device(dev);
4224 struct scsi_tape *tpnt;
4225 int i, j, mode;
4226
4227 scsi_autopm_get_device(SDp);
4228 write_lock(&st_dev_arr_lock);
4229 for (i = 0; i < st_dev_max; i++) {
4230 tpnt = scsi_tapes[i];
4231 if (tpnt != NULL && tpnt->device == SDp) {
4232 scsi_tapes[i] = NULL;
4233 st_nr_dev--;
4234 write_unlock(&st_dev_arr_lock);
4235 sysfs_remove_link(&tpnt->device->sdev_gendev.kobj,
4236 "tape");
4237 for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4238 for (j=0; j < 2; j++) {
4239 device_destroy(st_sysfs_class,
4240 MKDEV(SCSI_TAPE_MAJOR,
4241 TAPE_MINOR(i, mode, j)));
4242 cdev_del(tpnt->modes[mode].cdevs[j]);
4243 tpnt->modes[mode].cdevs[j] = NULL;
4244 }
4245 }
4246
4247 mutex_lock(&st_ref_mutex);
4248 kref_put(&tpnt->kref, scsi_tape_release);
4249 mutex_unlock(&st_ref_mutex);
4250 return 0;
4251 }
4252 }
4253
4254 write_unlock(&st_dev_arr_lock);
4255 return 0;
4256}
4257
4258/**
4259 * scsi_tape_release - Called to free the Scsi_Tape structure
4260 * @kref: pointer to embedded kref
4261 *
4262 * st_ref_mutex must be held entering this routine. Because it is
4263 * called on last put, you should always use the scsi_tape_get()
4264 * scsi_tape_put() helpers which manipulate the semaphore directly
4265 * and never do a direct kref_put().
4266 **/
4267static void scsi_tape_release(struct kref *kref)
4268{
4269 struct scsi_tape *tpnt = to_scsi_tape(kref);
4270 struct gendisk *disk = tpnt->disk;
4271
4272 tpnt->device = NULL;
4273
4274 if (tpnt->buffer) {
4275 normalize_buffer(tpnt->buffer);
4276 kfree(tpnt->buffer->reserved_pages);
4277 kfree(tpnt->buffer);
4278 }
4279
4280 disk->private_data = NULL;
4281 put_disk(disk);
4282 kfree(tpnt);
4283 return;
4284}
4285
4286static int __init init_st(void)
4287{
4288 int err;
4289
4290 validate_options();
4291
4292 printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
4293 verstr, st_fixed_buffer_size, st_max_sg_segs);
4294
4295 st_sysfs_class = class_create(THIS_MODULE, "scsi_tape");
4296 if (IS_ERR(st_sysfs_class)) {
4297 printk(KERN_ERR "Unable create sysfs class for SCSI tapes\n");
4298 return PTR_ERR(st_sysfs_class);
4299 }
4300
4301 err = register_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4302 ST_MAX_TAPE_ENTRIES, "st");
4303 if (err) {
4304 printk(KERN_ERR "Unable to get major %d for SCSI tapes\n",
4305 SCSI_TAPE_MAJOR);
4306 goto err_class;
4307 }
4308
4309 err = scsi_register_driver(&st_template.gendrv);
4310 if (err)
4311 goto err_chrdev;
4312
4313 err = do_create_sysfs_files();
4314 if (err)
4315 goto err_scsidrv;
4316
4317 return 0;
4318
4319err_scsidrv:
4320 scsi_unregister_driver(&st_template.gendrv);
4321err_chrdev:
4322 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4323 ST_MAX_TAPE_ENTRIES);
4324err_class:
4325 class_destroy(st_sysfs_class);
4326 return err;
4327}
4328
4329static void __exit exit_st(void)
4330{
4331 do_remove_sysfs_files();
4332 scsi_unregister_driver(&st_template.gendrv);
4333 unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4334 ST_MAX_TAPE_ENTRIES);
4335 class_destroy(st_sysfs_class);
4336 kfree(scsi_tapes);
4337 printk(KERN_INFO "st: Unloaded.\n");
4338}
4339
4340module_init(init_st);
4341module_exit(exit_st);
4342
4343
4344/* The sysfs driver interface. Read-only at the moment */
4345static ssize_t st_try_direct_io_show(struct device_driver *ddp, char *buf)
4346{
4347 return snprintf(buf, PAGE_SIZE, "%d\n", try_direct_io);
4348}
4349static DRIVER_ATTR(try_direct_io, S_IRUGO, st_try_direct_io_show, NULL);
4350
4351static ssize_t st_fixed_buffer_size_show(struct device_driver *ddp, char *buf)
4352{
4353 return snprintf(buf, PAGE_SIZE, "%d\n", st_fixed_buffer_size);
4354}
4355static DRIVER_ATTR(fixed_buffer_size, S_IRUGO, st_fixed_buffer_size_show, NULL);
4356
4357static ssize_t st_max_sg_segs_show(struct device_driver *ddp, char *buf)
4358{
4359 return snprintf(buf, PAGE_SIZE, "%d\n", st_max_sg_segs);
4360}
4361static DRIVER_ATTR(max_sg_segs, S_IRUGO, st_max_sg_segs_show, NULL);
4362
4363static ssize_t st_version_show(struct device_driver *ddd, char *buf)
4364{
4365 return snprintf(buf, PAGE_SIZE, "[%s]\n", verstr);
4366}
4367static DRIVER_ATTR(version, S_IRUGO, st_version_show, NULL);
4368
4369static int do_create_sysfs_files(void)
4370{
4371 struct device_driver *sysfs = &st_template.gendrv;
4372 int err;
4373
4374 err = driver_create_file(sysfs, &driver_attr_try_direct_io);
4375 if (err)
4376 return err;
4377 err = driver_create_file(sysfs, &driver_attr_fixed_buffer_size);
4378 if (err)
4379 goto err_try_direct_io;
4380 err = driver_create_file(sysfs, &driver_attr_max_sg_segs);
4381 if (err)
4382 goto err_attr_fixed_buf;
4383 err = driver_create_file(sysfs, &driver_attr_version);
4384 if (err)
4385 goto err_attr_max_sg;
4386
4387 return 0;
4388
4389err_attr_max_sg:
4390 driver_remove_file(sysfs, &driver_attr_max_sg_segs);
4391err_attr_fixed_buf:
4392 driver_remove_file(sysfs, &driver_attr_fixed_buffer_size);
4393err_try_direct_io:
4394 driver_remove_file(sysfs, &driver_attr_try_direct_io);
4395 return err;
4396}
4397
4398static void do_remove_sysfs_files(void)
4399{
4400 struct device_driver *sysfs = &st_template.gendrv;
4401
4402 driver_remove_file(sysfs, &driver_attr_version);
4403 driver_remove_file(sysfs, &driver_attr_max_sg_segs);
4404 driver_remove_file(sysfs, &driver_attr_fixed_buffer_size);
4405 driver_remove_file(sysfs, &driver_attr_try_direct_io);
4406}
4407
4408
4409/* The sysfs simple class interface */
4410static ssize_t
4411st_defined_show(struct device *dev, struct device_attribute *attr, char *buf)
4412{
4413 struct st_modedef *STm = dev_get_drvdata(dev);
4414 ssize_t l = 0;
4415
4416 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->defined);
4417 return l;
4418}
4419
4420DEVICE_ATTR(defined, S_IRUGO, st_defined_show, NULL);
4421
4422static ssize_t
4423st_defblk_show(struct device *dev, struct device_attribute *attr, char *buf)
4424{
4425 struct st_modedef *STm = dev_get_drvdata(dev);
4426 ssize_t l = 0;
4427
4428 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_blksize);
4429 return l;
4430}
4431
4432DEVICE_ATTR(default_blksize, S_IRUGO, st_defblk_show, NULL);
4433
4434static ssize_t
4435st_defdensity_show(struct device *dev, struct device_attribute *attr, char *buf)
4436{
4437 struct st_modedef *STm = dev_get_drvdata(dev);
4438 ssize_t l = 0;
4439 char *fmt;
4440
4441 fmt = STm->default_density >= 0 ? "0x%02x\n" : "%d\n";
4442 l = snprintf(buf, PAGE_SIZE, fmt, STm->default_density);
4443 return l;
4444}
4445
4446DEVICE_ATTR(default_density, S_IRUGO, st_defdensity_show, NULL);
4447
4448static ssize_t
4449st_defcompression_show(struct device *dev, struct device_attribute *attr,
4450 char *buf)
4451{
4452 struct st_modedef *STm = dev_get_drvdata(dev);
4453 ssize_t l = 0;
4454
4455 l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_compression - 1);
4456 return l;
4457}
4458
4459DEVICE_ATTR(default_compression, S_IRUGO, st_defcompression_show, NULL);
4460
4461static ssize_t
4462st_options_show(struct device *dev, struct device_attribute *attr, char *buf)
4463{
4464 struct st_modedef *STm = dev_get_drvdata(dev);
4465 struct scsi_tape *STp;
4466 int i, j, options;
4467 ssize_t l = 0;
4468
4469 for (i=0; i < st_dev_max; i++) {
4470 for (j=0; j < ST_NBR_MODES; j++)
4471 if (&scsi_tapes[i]->modes[j] == STm)
4472 break;
4473 if (j < ST_NBR_MODES)
4474 break;
4475 }
4476 if (i == st_dev_max)
4477 return 0; /* should never happen */
4478
4479 STp = scsi_tapes[i];
4480
4481 options = STm->do_buffer_writes ? MT_ST_BUFFER_WRITES : 0;
4482 options |= STm->do_async_writes ? MT_ST_ASYNC_WRITES : 0;
4483 options |= STm->do_read_ahead ? MT_ST_READ_AHEAD : 0;
4484 DEB( options |= debugging ? MT_ST_DEBUGGING : 0 );
4485 options |= STp->two_fm ? MT_ST_TWO_FM : 0;
4486 options |= STp->fast_mteom ? MT_ST_FAST_MTEOM : 0;
4487 options |= STm->defaults_for_writes ? MT_ST_DEF_WRITES : 0;
4488 options |= STp->can_bsr ? MT_ST_CAN_BSR : 0;
4489 options |= STp->omit_blklims ? MT_ST_NO_BLKLIMS : 0;
4490 options |= STp->can_partitions ? MT_ST_CAN_PARTITIONS : 0;
4491 options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0;
4492 options |= STm->sysv ? MT_ST_SYSV : 0;
4493 options |= STp->immediate ? MT_ST_NOWAIT : 0;
4494 options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0;
4495 options |= STp->sili ? MT_ST_SILI : 0;
4496
4497 l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options);
4498 return l;
4499}
4500
4501DEVICE_ATTR(options, S_IRUGO, st_options_show, NULL);
4502
4503static int do_create_class_files(struct scsi_tape *STp, int dev_num, int mode)
4504{
4505 int i, rew, error;
4506 char name[10];
4507 struct device *st_class_member;
4508
4509 for (rew=0; rew < 2; rew++) {
4510 /* Make sure that the minor numbers corresponding to the four
4511 first modes always get the same names */
4512 i = mode << (4 - ST_NBR_MODE_BITS);
4513 snprintf(name, 10, "%s%s%s", rew ? "n" : "",
4514 STp->disk->disk_name, st_formats[i]);
4515 st_class_member =
4516 device_create(st_sysfs_class, &STp->device->sdev_gendev,
4517 MKDEV(SCSI_TAPE_MAJOR,
4518 TAPE_MINOR(dev_num, mode, rew)),
4519 &STp->modes[mode], "%s", name);
4520 if (IS_ERR(st_class_member)) {
4521 printk(KERN_WARNING "st%d: device_create failed\n",
4522 dev_num);
4523 error = PTR_ERR(st_class_member);
4524 goto out;
4525 }
4526
4527 error = device_create_file(st_class_member,
4528 &dev_attr_defined);
4529 if (error) goto out;
4530 error = device_create_file(st_class_member,
4531 &dev_attr_default_blksize);
4532 if (error) goto out;
4533 error = device_create_file(st_class_member,
4534 &dev_attr_default_density);
4535 if (error) goto out;
4536 error = device_create_file(st_class_member,
4537 &dev_attr_default_compression);
4538 if (error) goto out;
4539 error = device_create_file(st_class_member,
4540 &dev_attr_options);
4541 if (error) goto out;
4542
4543 if (mode == 0 && rew == 0) {
4544 error = sysfs_create_link(&STp->device->sdev_gendev.kobj,
4545 &st_class_member->kobj,
4546 "tape");
4547 if (error) {
4548 printk(KERN_ERR
4549 "st%d: Can't create sysfs link from SCSI device.\n",
4550 dev_num);
4551 goto out;
4552 }
4553 }
4554 }
4555
4556 return 0;
4557
4558out:
4559 return error;
4560}
4561
4562/* The following functions may be useful for a larger audience. */
4563static int sgl_map_user_pages(struct st_buffer *STbp,
4564 const unsigned int max_pages, unsigned long uaddr,
4565 size_t count, int rw)
4566{
4567 unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
4568 unsigned long start = uaddr >> PAGE_SHIFT;
4569 const int nr_pages = end - start;
4570 int res, i, j;
4571 struct page **pages;
4572 struct rq_map_data *mdata = &STbp->map_data;
4573
4574 /* User attempted Overflow! */
4575 if ((uaddr + count) < uaddr)
4576 return -EINVAL;
4577
4578 /* Too big */
4579 if (nr_pages > max_pages)
4580 return -ENOMEM;
4581
4582 /* Hmm? */
4583 if (count == 0)
4584 return 0;
4585
4586 if ((pages = kmalloc(max_pages * sizeof(*pages), GFP_KERNEL)) == NULL)
4587 return -ENOMEM;
4588
4589 /* Try to fault in all of the necessary pages */
4590 down_read(¤t->mm->mmap_sem);
4591 /* rw==READ means read from drive, write into memory area */
4592 res = get_user_pages(
4593 current,
4594 current->mm,
4595 uaddr,
4596 nr_pages,
4597 rw == READ,
4598 0, /* don't force */
4599 pages,
4600 NULL);
4601 up_read(¤t->mm->mmap_sem);
4602
4603 /* Errors and no page mapped should return here */
4604 if (res < nr_pages)
4605 goto out_unmap;
4606
4607 for (i=0; i < nr_pages; i++) {
4608 /* FIXME: flush superflous for rw==READ,
4609 * probably wrong function for rw==WRITE
4610 */
4611 flush_dcache_page(pages[i]);
4612 }
4613
4614 mdata->offset = uaddr & ~PAGE_MASK;
4615 STbp->mapped_pages = pages;
4616
4617 return nr_pages;
4618 out_unmap:
4619 if (res > 0) {
4620 for (j=0; j < res; j++)
4621 page_cache_release(pages[j]);
4622 res = 0;
4623 }
4624 kfree(pages);
4625 return res;
4626}
4627
4628
4629/* And unmap them... */
4630static int sgl_unmap_user_pages(struct st_buffer *STbp,
4631 const unsigned int nr_pages, int dirtied)
4632{
4633 int i;
4634
4635 for (i=0; i < nr_pages; i++) {
4636 struct page *page = STbp->mapped_pages[i];
4637
4638 if (dirtied)
4639 SetPageDirty(page);
4640 /* FIXME: cache flush missing for rw==READ
4641 * FIXME: call the correct reference counting function
4642 */
4643 page_cache_release(page);
4644 }
4645 kfree(STbp->mapped_pages);
4646 STbp->mapped_pages = NULL;
4647
4648 return 0;
4649}