1menuconfig REGULATOR
  2	bool "Voltage and Current Regulator Support"
  3	help
  4	  Generic Voltage and Current Regulator support.
  5
  6	  This framework is designed to provide a generic interface to voltage
  7	  and current regulators within the Linux kernel. It's intended to
  8	  provide voltage and current control to client or consumer drivers and
  9	  also provide status information to user space applications through a
 10	  sysfs interface.
 11
 12	  The intention is to allow systems to dynamically control regulator
 13	  output in order to save power and prolong battery life. This applies
 14	  to both voltage regulators (where voltage output is controllable) and
 15	  current sinks (where current output is controllable).
 16
 17	  This framework safely compiles out if not selected so that client
 18	  drivers can still be used in systems with no software controllable
 19	  regulators.
 20
 21	  If unsure, say no.
 22
 23
 24if REGULATOR
 25
 26config REGULATOR_DEBUG
 27	bool "Regulator debug support"
 28	help
 29	  Say yes here to enable debugging support.
 30
 
 
 
 
 
 
 
 
 
 
 
 31config REGULATOR_FIXED_VOLTAGE
 32	tristate "Fixed voltage regulator support"
 33	help
 34	  This driver provides support for fixed voltage regulators,
 35	  useful for systems which use a combination of software
 36	  managed regulators and simple non-configurable regulators.
 37
 38config REGULATOR_VIRTUAL_CONSUMER
 39	tristate "Virtual regulator consumer support"
 40	help
 41	  This driver provides a virtual consumer for the voltage and
 42	  current regulator API which provides sysfs controls for
 43	  configuring the supplies requested.  This is mainly useful
 44	  for test purposes.
 45
 46	  If unsure, say no.
 47
 48config REGULATOR_USERSPACE_CONSUMER
 49	tristate "Userspace regulator consumer support"
 50	help
 51	  There are some classes of devices that are controlled entirely
 52	  from user space. Userspace consumer driver provides ability to
 53	  control power supplies for such devices.
 54
 55	  If unsure, say no.
 56
 57config REGULATOR_88PM800
 58	tristate "Marvell 88PM800 Power regulators"
 59	depends on MFD_88PM800
 60	help
 61	  This driver supports Marvell 88PM800 voltage regulator chips.
 62	  It delivers digitally programmable output,
 63	  the voltage is programmed via I2C interface.
 64	  It's suitable to support PXA988 chips to control VCC_MAIN and
 65	  various voltages.
 66
 67config REGULATOR_88PM8607
 68	tristate "Marvell 88PM8607 Power regulators"
 69	depends on MFD_88PM860X=y
 70	help
 71	  This driver supports 88PM8607 voltage regulator chips.
 72
 73config REGULATOR_ACT8865
 74	tristate "Active-semi act8865 voltage regulator"
 75	depends on I2C
 76	select REGMAP_I2C
 77	help
 78	  This driver controls a active-semi act8865 voltage output
 79	  regulator via I2C bus.
 80
 81config REGULATOR_ACT8945A
 82	tristate "Active-semi ACT8945A voltage regulator"
 83	depends on MFD_ACT8945A
 84	help
 85	  This driver controls a active-semi ACT8945A voltage regulator
 86	  via I2C bus. The ACT8945A features three step-down DC/DC converters
 87	  and four low-dropout linear regulators, along with a ActivePath
 88	  battery charger.
 89
 90config REGULATOR_AD5398
 91	tristate "Analog Devices AD5398/AD5821 regulators"
 92	depends on I2C
 93	help
 94	  This driver supports AD5398 and AD5821 current regulator chips.
 95	  If building into module, its name is ad5398.ko.
 96
 97config REGULATOR_ANATOP
 98	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
 99	depends on MFD_SYSCON
100	help
101	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
102	  regulators. It is recommended that this option be
103	  enabled on i.MX6 platform.
104
105config REGULATOR_AAT2870
106	tristate "AnalogicTech AAT2870 Regulators"
107	depends on MFD_AAT2870_CORE
108	help
109	  If you have a AnalogicTech AAT2870 say Y to enable the
110	  regulator driver.
111
112config REGULATOR_AB3100
113	tristate "ST-Ericsson AB3100 Regulator functions"
114	depends on AB3100_CORE
115	default y if AB3100_CORE
116	help
117	 These regulators correspond to functionality in the
118	 AB3100 analog baseband dealing with power regulators
119	 for the system.
120
121config REGULATOR_AB8500
122	bool "ST-Ericsson AB8500 Power Regulators"
123	depends on AB8500_CORE
124	help
125	  This driver supports the regulators found on the ST-Ericsson mixed
126	  signal AB8500 PMIC
127
128config REGULATOR_ARIZONA
129	tristate "Wolfson Arizona class devices"
130	depends on MFD_ARIZONA
131	depends on SND_SOC
132	help
133	  Support for the regulators found on Wolfson Arizona class
134	  devices.
135
136config REGULATOR_AS3711
137	tristate "AS3711 PMIC"
138	depends on MFD_AS3711
139	help
140	  This driver provides support for the voltage regulators on the
141	  AS3711 PMIC
142
143config REGULATOR_AS3722
144	tristate "AMS AS3722 PMIC Regulators"
145	depends on MFD_AS3722
146	help
147	  This driver provides support for the voltage regulators on the
148	  AS3722 PMIC. This will enable support for all the software
149	  controllable DCDC/LDO regulators.
150
151config REGULATOR_AXP20X
152	tristate "X-POWERS AXP20X PMIC Regulators"
153	depends on MFD_AXP20X
154	help
155	  This driver provides support for the voltage regulators on the
156	  AXP20X PMIC.
157
158config REGULATOR_BCM590XX
159	tristate "Broadcom BCM590xx PMU Regulators"
160	depends on MFD_BCM590XX
161	help
162	  This driver provides support for the voltage regulators on the
163	  BCM590xx PMUs. This will enable support for the software
164	  controllable LDO/Switching regulators.
165
166config REGULATOR_DA903X
167	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
168	depends on PMIC_DA903X
169	help
170	  Say y here to support the BUCKs and LDOs regulators found on
171	  Dialog Semiconductor DA9030/DA9034 PMIC.
172
173config REGULATOR_DA9052
174	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
175	depends on PMIC_DA9052
176	help
177	  This driver supports the voltage regulators of DA9052-BC and
178	  DA9053-AA/Bx PMIC.
179
180config REGULATOR_DA9055
181	tristate "Dialog Semiconductor DA9055 regulators"
182	depends on MFD_DA9055
183	help
184	  Say y here to support the BUCKs and LDOs regulators found on
185	  Dialog Semiconductor DA9055 PMIC.
186
187	  This driver can also be built as a module. If so, the module
188	  will be called da9055-regulator.
189
190config REGULATOR_DA9062
191	tristate "Dialog Semiconductor DA9062 regulators"
192	depends on MFD_DA9062
193	help
194	  Say y here to support the BUCKs and LDOs regulators found on
195	  DA9062 PMICs.
196
197	  This driver can also be built as a module. If so, the module
198	  will be called da9062-regulator.
199
200config REGULATOR_DA9063
201	tristate "Dialog Semiconductor DA9063 regulators"
202	depends on MFD_DA9063
203	help
204	  Say y here to support the BUCKs and LDOs regulators found on
205	  DA9063 PMICs.
206
207	  This driver can also be built as a module. If so, the module
208	  will be called da9063-regulator.
209
210config REGULATOR_DA9210
211	tristate "Dialog Semiconductor DA9210 regulator"
212	depends on I2C
213	select REGMAP_I2C
214	help
215	  Say y here to support for the Dialog Semiconductor DA9210.
216	  The DA9210 is a multi-phase synchronous step down
217	  converter 12A DC-DC Buck controlled through an I2C
218	  interface.
219
220config REGULATOR_DA9211
221	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
222	depends on I2C
223	select REGMAP_I2C
224	help
225	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
226	  /DA9213/DA9214/DA9215.
227	  The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
228	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
229	  interface.
230
231config REGULATOR_DBX500_PRCMU
232	bool
233
234config REGULATOR_DB8500_PRCMU
235	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
236	depends on MFD_DB8500_PRCMU
237	select REGULATOR_DBX500_PRCMU
238	help
239	  This driver supports the voltage domain regulators controlled by the
240	  DB8500 PRCMU
241
242config REGULATOR_FAN53555
243	tristate "Fairchild FAN53555 Regulator"
244	depends on I2C
245	select REGMAP_I2C
246	help
247	  This driver supports Fairchild FAN53555 Digitally Programmable
248	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
249	  regulator that delivers a digitally programmable output from an
250	  input voltage supply of 2.5V to 5.5V. The output voltage is
251	  programmed through an I2C interface.
252
253config REGULATOR_GPIO
254	tristate "GPIO regulator support"
255	depends on GPIOLIB || COMPILE_TEST
256	help
257	  This driver provides support for regulators that can be
258	  controlled via gpios.
259	  It is capable of supporting current and voltage regulators
260	  and the platform has to provide a mapping of GPIO-states
261	  to target volts/amps.
262
263config REGULATOR_HI6421
264	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
265	depends on MFD_HI6421_PMIC && OF
266	help
267	  This driver provides support for the voltage regulators on the
268	  HiSilicon Hi6421 PMU / Codec IC.
269	  Hi6421 is a multi-function device which, on regulator part, provides
270	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
271	  of them come with support to either ECO (idle) or sleep mode.
272
273config REGULATOR_HI655X
274	tristate "Hisilicon HI655X PMIC regulators support"
275	depends on ARCH_HISI || COMPILE_TEST
276	depends on MFD_HI655X_PMIC && OF
277	help
278	  This driver provides support for the voltage regulators of the
279	  Hisilicon Hi655x PMIC device.
280
281config REGULATOR_ISL9305
282	tristate "Intersil ISL9305 regulator"
283	depends on I2C
284	select REGMAP_I2C
285	help
286	  This driver supports ISL9305 voltage regulator chip.
 
287
288config REGULATOR_ISL6271A
289	tristate "Intersil ISL6271A Power regulator"
290	depends on I2C
291	help
292	  This driver supports ISL6271A voltage regulator chip.
293
294config REGULATOR_LM363X
295	tristate "TI LM363X voltage regulators"
296	depends on MFD_TI_LMU
297	help
298	  This driver supports LM3631 and LM3632 voltage regulators for
299	  the LCD bias.
300	  One boost output voltage is configurable and always on.
301	  Other LDOs are used for the display module.
302
303config REGULATOR_LP3971
304	tristate "National Semiconductors LP3971 PMIC regulator driver"
305	depends on I2C
306	help
307	 Say Y here to support the voltage regulators and convertors
308	 on National Semiconductors LP3971 PMIC
309
310config REGULATOR_LP3972
311	tristate "National Semiconductors LP3972 PMIC regulator driver"
312	depends on I2C
313	help
314	 Say Y here to support the voltage regulators and convertors
315	 on National Semiconductors LP3972 PMIC
316
317config REGULATOR_LP872X
318	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
319	depends on I2C
320	select REGMAP_I2C
321	help
322	  This driver supports LP8720/LP8725 PMIC
323
324config REGULATOR_LP8755
325	tristate "TI LP8755 High Performance PMU driver"
326	depends on I2C
327	select REGMAP_I2C
328	help
329	  This driver supports LP8755 High Performance PMU driver. This
330	  chip contains six step-down DC/DC converters which can support
331	  9 mode multiphase configuration.
332
333config REGULATOR_LP8788
334	tristate "TI LP8788 Power Regulators"
335	depends on MFD_LP8788
336	help
337	  This driver supports LP8788 voltage regulator chip.
338
339config REGULATOR_LTC3589
340	tristate "LTC3589 8-output voltage regulator"
341	depends on I2C
342	select REGMAP_I2C
343	help
344	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
345	  8-output regulators controlled via I2C.
346
347config REGULATOR_MAX14577
348	tristate "Maxim 14577/77836 regulator"
349	depends on MFD_MAX14577
350	help
351	  This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
352	  The MAX14577 regulators include safeout LDO and charger current
353	  regulator. The MAX77836 has two additional LDOs.
354
355config REGULATOR_MAX1586
356	tristate "Maxim 1586/1587 voltage regulator"
357	depends on I2C
358	help
359	  This driver controls a Maxim 1586 or 1587 voltage output
360	  regulator via I2C bus. The provided regulator is suitable
361	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
362
363config REGULATOR_MAX77620
364	tristate "Maxim 77620/MAX20024 voltage regulator"
365	depends on MFD_MAX77620
366	help
367	  This driver controls Maxim MAX77620 voltage output regulator
368	  via I2C bus. The provided regulator is suitable for Tegra
369	  chip to control Step-Down DC-DC and LDOs. Say Y here to
370	  enable the regulator driver.
371
372config REGULATOR_MAX8649
373	tristate "Maxim 8649 voltage regulator"
374	depends on I2C
375	select REGMAP_I2C
376	help
377	  This driver controls a Maxim 8649 voltage output regulator via
378	  I2C bus.
379
380config REGULATOR_MAX8660
381	tristate "Maxim 8660/8661 voltage regulator"
382	depends on I2C
383	help
384	  This driver controls a Maxim 8660/8661 voltage output
385	  regulator via I2C bus.
386
387config REGULATOR_MAX8907
388	tristate "Maxim 8907 voltage regulator"
389	depends on MFD_MAX8907
390	help
391	  This driver controls a Maxim 8907 voltage output regulator
392	  via I2C bus. The provided regulator is suitable for Tegra
393	  chip to control Step-Down DC-DC and LDOs.
394
395config REGULATOR_MAX8925
396	tristate "Maxim MAX8925 Power Management IC"
397	depends on MFD_MAX8925
398	help
399	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
400
401config REGULATOR_MAX8952
402	tristate "Maxim MAX8952 Power Management IC"
403	depends on I2C
404	help
405	  This driver controls a Maxim 8952 voltage output regulator
406	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
407	  modes ranging from 0.77V to 1.40V by 0.01V steps.
408
409config REGULATOR_MAX8973
410	tristate "Maxim MAX8973 voltage regulator "
411	depends on I2C
412	select REGMAP_I2C
413	help
414	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
415	  switching regulator delievers up to 9A of output current. Each
416	  phase operates at a 2MHz fixed frequency with a 120 deg shift
417	  from the adjacent phase, allowing the use of small magnetic component.
418
419config REGULATOR_MAX8997
420	tristate "Maxim 8997/8966 regulator"
421	depends on MFD_MAX8997
422	help
423	  This driver controls a Maxim 8997/8966 regulator
424	  via I2C bus. The provided regulator is suitable for S5PC110,
425	  S5PV210, and Exynos-4 chips to control VCC_CORE and
426	  VCC_USIM voltages.
427
428config REGULATOR_MAX8998
429	tristate "Maxim 8998 voltage regulator"
430	depends on MFD_MAX8998
431	help
432	  This driver controls a Maxim 8998 voltage output regulator
433	  via I2C bus. The provided regulator is suitable for S3C6410
434	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
435
436config REGULATOR_MAX77686
437	tristate "Maxim 77686 regulator"
438	depends on MFD_MAX77686
439	help
440	  This driver controls a Maxim 77686 regulator
441	  via I2C bus. The provided regulator is suitable for
442	  Exynos-4 chips to control VARM and VINT voltages.
443
444config REGULATOR_MAX77693
445	tristate "Maxim 77693/77843 regulator"
446	depends on (MFD_MAX77693 || MFD_MAX77843)
447	help
448	  This driver controls a Maxim 77693/77843 regulators via I2C bus.
449	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
450	  and one current regulator 'CHARGER'. This is suitable for
451	  Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
452
453config REGULATOR_MAX77802
454	tristate "Maxim 77802 regulator"
455	depends on MFD_MAX77686
456	help
457	  This driver controls a Maxim 77802 regulator
458	  via I2C bus. The provided regulator is suitable for
459	  Exynos5420/Exynos5800 SoCs to control various voltages.
460	  It includes support for control of voltage and ramp speed.
461
462config REGULATOR_MC13XXX_CORE
463	tristate
464
465config REGULATOR_MC13783
466	tristate "Freescale MC13783 regulator driver"
467	depends on MFD_MC13XXX
468	select REGULATOR_MC13XXX_CORE
469	help
470	  Say y here to support the regulators found on the Freescale MC13783
471	  PMIC.
472
473config REGULATOR_MC13892
474	tristate "Freescale MC13892 regulator driver"
475	depends on MFD_MC13XXX
476	select REGULATOR_MC13XXX_CORE
477	help
478	  Say y here to support the regulators found on the Freescale MC13892
479	  PMIC.
480
481config REGULATOR_MT6311
482	tristate "MediaTek MT6311 PMIC"
483	depends on I2C
484	select REGMAP_I2C
485	help
486	  Say y here to select this option to enable the power regulator of
487	  MediaTek MT6311 PMIC.
488	  This driver supports the control of different power rails of device
489	  through regulator interface.
490
491config REGULATOR_MT6397
492	tristate "MediaTek MT6397 PMIC"
493	depends on MFD_MT6397
494	help
495	  Say y here to select this option to enable the power regulator of
496	  MediaTek MT6397 PMIC.
497	  This driver supports the control of different power rails of device
498	  through regulator interface.
499
500config REGULATOR_PALMAS
501	tristate "TI Palmas PMIC Regulators"
502	depends on MFD_PALMAS
503	help
504	  If you wish to control the regulators on the Palmas series of
505	  chips say Y here. This will enable support for all the software
506	  controllable SMPS/LDO regulators.
507
508	  The regulators available on Palmas series chips vary depending
509	  on the muxing. This is handled automatically in the driver by
510	  reading the mux info from OTP.
511
512config REGULATOR_PBIAS
513	tristate "PBIAS OMAP regulator driver"
514	depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
515	help
516	 Say y here to support pbias regulator for mmc1:SD card i/o
517	 on OMAP SoCs.
518	 This driver provides support for OMAP pbias modelled
519	 regulators.
520
521config REGULATOR_PCAP
522	tristate "Motorola PCAP2 regulator driver"
523	depends on EZX_PCAP
524	help
525	 This driver provides support for the voltage regulators of the
526	 PCAP2 PMIC.
527
528config REGULATOR_PCF50633
529	tristate "NXP PCF50633 regulator driver"
530	depends on MFD_PCF50633
531	help
532	 Say Y here to support the voltage regulators and convertors
533	 on PCF50633
534
535config REGULATOR_PFUZE100
536	tristate "Freescale PFUZE100/PFUZE200 regulator driver"
537	depends on I2C
538	select REGMAP_I2C
539	help
540	  Say y here to support the regulators found on the Freescale
541	  PFUZE100/PFUZE200 PMIC.
542
543config REGULATOR_PV88060
544	tristate "Powerventure Semiconductor PV88060 regulator"
545	depends on I2C
546	select REGMAP_I2C
547	help
548	  Say y here to support the voltage regulators and convertors
549	  PV88060
550
551config REGULATOR_PV88090
552	tristate "Powerventure Semiconductor PV88090 regulator"
553	depends on I2C
554	select REGMAP_I2C
555	help
556	  Say y here to support the voltage regulators and convertors
557	  on PV88090
558
559config REGULATOR_PWM
560	tristate "PWM voltage regulator"
561	depends on PWM
562	help
563	  This driver supports PWM controlled voltage regulators. PWM
564	  duty cycle can increase or decrease the voltage.
565
566config REGULATOR_QCOM_RPM
567	tristate "Qualcomm RPM regulator driver"
568	depends on MFD_QCOM_RPM
569	help
570	  If you say yes to this option, support will be included for the
571	  regulators exposed by the Resource Power Manager found in Qualcomm
572	  8660, 8960 and 8064 based devices.
573
574	  Say M here if you want to include support for the regulators on the
575	  Qualcomm RPM as a module. The module will be named
576	  "qcom_rpm-regulator".
577
578config REGULATOR_QCOM_SMD_RPM
579	tristate "Qualcomm SMD based RPM regulator driver"
580	depends on QCOM_SMD_RPM
581	help
582	  If you say yes to this option, support will be included for the
583	  regulators exposed by the Resource Power Manager found in Qualcomm
584	  8974 based devices.
585
586	  Say M here if you want to include support for the regulators on the
587	  Qualcomm RPM as a module. The module will be named
588	  "qcom_smd-regulator".
589
590config REGULATOR_QCOM_SPMI
591	tristate "Qualcomm SPMI regulator driver"
592	depends on SPMI || COMPILE_TEST
593	help
594	  If you say yes to this option, support will be included for the
595	  regulators found in Qualcomm SPMI PMICs.
596
597	  Say M here if you want to include support for the regulators on the
598	  Qualcomm SPMI PMICs as a module. The module will be named
599	  "qcom_spmi-regulator".
600
601config REGULATOR_RC5T583
602	tristate "RICOH RC5T583 Power regulators"
603	depends on MFD_RC5T583
604	help
605	  Select this option to enable the power regulator of RICOH
606	  PMIC RC5T583.
607	  This driver supports the control of different power rails of device
608	  through regulator interface. The device supports multiple DCDC/LDO
609	  outputs which can be controlled by i2c communication.
610
611config REGULATOR_RK808
612	tristate "Rockchip RK808 Power regulators"
613	depends on MFD_RK808
614	help
615	  Select this option to enable the power regulator of ROCKCHIP
616	  PMIC RK808.
617	  This driver supports the control of different power rails of device
618	  through regulator interface. The device supports multiple DCDC/LDO
619	  outputs which can be controlled by i2c communication.
620
621config REGULATOR_RN5T618
622	tristate "Ricoh RN5T618 voltage regulators"
623	depends on MFD_RN5T618
624	help
625	  Say y here to support the regulators found on Ricoh RN5T618 PMIC.
626
627config REGULATOR_RT5033
628	tristate "Richtek RT5033 Regulators"
629	depends on MFD_RT5033
630	help
631	  This adds support for voltage and current regulators in Richtek
632	  RT5033 PMIC. The device supports multiple regulators like
633	  current source, LDO and Buck.
634
635config REGULATOR_S2MPA01
636	tristate "Samsung S2MPA01 voltage regulator"
637	depends on MFD_SEC_CORE
638	help
639	 This driver controls Samsung S2MPA01 voltage output regulator
640	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
641
642config REGULATOR_S2MPS11
643	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
644	depends on MFD_SEC_CORE
645	help
646	 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
647	 output regulator via I2C bus. The chip is comprised of high efficient
648	 Buck converters including Dual-Phase Buck converter, Buck-Boost
649	 converter, various LDOs.
650
651config REGULATOR_S5M8767
652	tristate "Samsung S5M8767A voltage regulator"
653	depends on MFD_SEC_CORE
654	help
655	 This driver supports a Samsung S5M8767A voltage output regulator
656	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
657	 supports DVS mode with 8bits of output voltage control.
658
659config REGULATOR_SKY81452
660	tristate "Skyworks Solutions SKY81452 voltage regulator"
661	depends on MFD_SKY81452
662	help
663	  This driver supports Skyworks SKY81452 voltage output regulator
664	  via I2C bus. SKY81452 has one voltage linear regulator can be
665	  programmed from 4.5V to 20V.
666
667	  This driver can also be built as a module. If so, the module
668	  will be called sky81452-regulator.
669
670config REGULATOR_TI_ABB
671	tristate "TI Adaptive Body Bias on-chip LDO"
672	depends on ARCH_OMAP
673	help
674	  Select this option to support Texas Instruments' on-chip Adaptive Body
675	  Bias (ABB) LDO regulators. It is recommended that this option be
676	  enabled on required TI SoC. Certain Operating Performance Points
677	  on TI SoCs may be unstable without enabling this as it provides
678	  device specific optimized bias to allow/optimize functionality.
679
680config REGULATOR_STW481X_VMMC
681	bool "ST Microelectronics STW481X VMMC regulator"
682	depends on MFD_STW481X || COMPILE_TEST
683	default y if MFD_STW481X
684	help
685	  This driver supports the internal VMMC regulator in the STw481x
686	  PMIC chips.
 
687
688config REGULATOR_TPS51632
689	tristate "TI TPS51632 Power Regulator"
690	depends on I2C
691	select REGMAP_I2C
692	help
693	  This driver supports TPS51632 voltage regulator chip.
694	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
695	  with Serial VID control and DVFS.
696	  The voltage output can be configure through I2C interface or PWM
697	  interface.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
698
699config REGULATOR_TPS6105X
700	tristate "TI TPS6105X Power regulators"
701	depends on TPS6105X
702	default y if TPS6105X
703	help
704	  This driver supports TPS61050/TPS61052 voltage regulator chips.
705	  It is a single boost converter primarily for white LEDs and
706	  audio amplifiers.
707
708config REGULATOR_TPS62360
709	tristate "TI TPS6236x Power Regulator"
710	depends on I2C
711	select REGMAP_I2C
712	help
713	  This driver supports TPS6236x voltage regulator chip. This
714	  regulator is meant for processor core supply. This chip is
715	  high-frequency synchronous step down dc-dc converter optimized
716	  for battery-powered portable applications.
717
718config REGULATOR_TPS65023
719	tristate "TI TPS65023 Power regulators"
720	depends on I2C
721	select REGMAP_I2C
722	help
723	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
724	  three step-down converters and two general-purpose LDO voltage regulators.
725	  It supports TI's software based Class-2 SmartReflex implementation.
726
727config REGULATOR_TPS6507X
728	tristate "TI TPS6507X Power regulators"
729	depends on I2C
730	help
731	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
732	  three step-down converters and two general-purpose LDO voltage regulators.
733	  It supports TI's software based Class-2 SmartReflex implementation.
734
735config REGULATOR_TPS65086
736	tristate "TI TPS65086 Power regulators"
737	depends on MFD_TPS65086
738	help
739	  This driver provides support for the voltage regulators on
740	  TI TPS65086 PMICs.
741
742config REGULATOR_TPS65090
743	tristate "TI TPS65090 Power regulator"
744	depends on MFD_TPS65090
745	help
746	  This driver provides support for the voltage regulators on the
747	  TI TPS65090 PMIC.
748
749config REGULATOR_TPS65217
750	tristate "TI TPS65217 Power regulators"
751	depends on MFD_TPS65217
752	help
753	  This driver supports TPS65217 voltage regulator chips. TPS65217
754	  provides three step-down converters and four general-purpose LDO
755	  voltage regulators. It supports software based voltage control
756	  for different voltage domains
757
758config REGULATOR_TPS65218
759	tristate "TI TPS65218 Power regulators"
760	depends on MFD_TPS65218 && OF
761	help
762	  This driver supports TPS65218 voltage regulator chips. TPS65218
763	  provides six step-down converters and one general-purpose LDO
764	  voltage regulators. It supports software based voltage control
765	  for different voltage domains
766
767config REGULATOR_TPS6524X
768	tristate "TI TPS6524X Power regulators"
769	depends on SPI
770	help
771	  This driver supports TPS6524X voltage regulator chips. TPS6524X
772	  provides three step-down converters and two general-purpose LDO
773	  voltage regulators.  This device is interfaced using a customized
774	  serial interface currently supported on the sequencer serial
775	  port controller.
776
777config REGULATOR_TPS6586X
778	tristate "TI TPS6586X Power regulators"
779	depends on MFD_TPS6586X
780	help
781	  This driver supports TPS6586X voltage regulator chips.
782
783config REGULATOR_TPS65910
784	tristate "TI TPS65910/TPS65911 Power Regulators"
785	depends on MFD_TPS65910
786	help
787	  This driver supports TPS65910/TPS65911 voltage regulator chips.
788
789config REGULATOR_TPS65912
790	tristate "TI TPS65912 Power regulator"
791	depends on MFD_TPS65912
792	help
793	    This driver supports TPS65912 voltage regulator chip.
794
795config REGULATOR_TPS80031
796	tristate "TI TPS80031/TPS80032 power regualtor driver"
797	depends on MFD_TPS80031
798	help
799	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
800	  Path and Battery Charger. It has 5 configurable step-down
801	  converters, 11 general purpose LDOs, VBUS generator and digital
802	  output to control regulators.
803
804config REGULATOR_TWL4030
805	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
806	depends on TWL4030_CORE
807	help
808	  This driver supports the voltage regulators provided by
809	  this family of companion chips.
810
811config REGULATOR_VEXPRESS
812	tristate "Versatile Express regulators"
813	depends on VEXPRESS_CONFIG
814	help
815	  This driver provides support for voltage regulators available
816	  on the ARM Ltd's Versatile Express platform.
817
818config REGULATOR_WM831X
819	tristate "Wolfson Microelectronics WM831x PMIC regulators"
820	depends on MFD_WM831X
821	help
822	  Support the voltage and current regulators of the WM831x series
823	  of PMIC devices.
824
825config REGULATOR_WM8350
826	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
827	depends on MFD_WM8350
828	help
829	  This driver provides support for the voltage and current regulators
830	  of the WM8350 AudioPlus PMIC.
831
832config REGULATOR_WM8400
833	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
834	depends on MFD_WM8400
835	help
836	  This driver provides support for the voltage regulators of the
837	  WM8400 AudioPlus PMIC.
838
839config REGULATOR_WM8994
840	tristate "Wolfson Microelectronics WM8994 CODEC"
841	depends on MFD_WM8994
842	help
843	  This driver provides support for the voltage regulators on the
844	  WM8994 CODEC.
845
846endif
847

  1menuconfig REGULATOR
  2	bool "Voltage and Current Regulator Support"
  3	help
  4	  Generic Voltage and Current Regulator support.
  5
  6	  This framework is designed to provide a generic interface to voltage
  7	  and current regulators within the Linux kernel. It's intended to
  8	  provide voltage and current control to client or consumer drivers and
  9	  also provide status information to user space applications through a
 10	  sysfs interface.
 11
 12	  The intention is to allow systems to dynamically control regulator
 13	  output in order to save power and prolong battery life. This applies
 14	  to both voltage regulators (where voltage output is controllable) and
 15	  current sinks (where current output is controllable).
 16
 17	  This framework safely compiles out if not selected so that client
 18	  drivers can still be used in systems with no software controllable
 19	  regulators.
 20
 21	  If unsure, say no.
 22
 
 23if REGULATOR
 24
 25config REGULATOR_DEBUG
 26	bool "Regulator debug support"
 27	help
 28	  Say yes here to enable debugging support.
 29
 30config REGULATOR_DUMMY
 31	bool "Provide a dummy regulator if regulator lookups fail"
 32	help
 33	  If this option is enabled then when a regulator lookup fails
 34	  and the board has not specified that it has provided full
 35	  constraints then the regulator core will provide an always
 36	  enabled dummy regulator will be provided, allowing consumer
 37	  drivers to continue.
 38
 39	  A warning will be generated when this substitution is done.
 40
 41config REGULATOR_FIXED_VOLTAGE
 42	tristate "Fixed voltage regulator support"
 43	help
 44	  This driver provides support for fixed voltage regulators,
 45	  useful for systems which use a combination of software
 46	  managed regulators and simple non-configurable regulators.
 47
 48config REGULATOR_VIRTUAL_CONSUMER
 49	tristate "Virtual regulator consumer support"
 50	help
 51	  This driver provides a virtual consumer for the voltage and
 52          current regulator API which provides sysfs controls for
 53          configuring the supplies requested.  This is mainly useful
 54          for test purposes.
 55
 56          If unsure, say no.
 57
 58config REGULATOR_USERSPACE_CONSUMER
 59	tristate "Userspace regulator consumer support"
 60	help
 61	  There are some classes of devices that are controlled entirely
 62	  from user space. Userspace consumer driver provides ability to
 63	  control power supplies for such devices.
 64
 65          If unsure, say no.
 
 
 
 
 
 
 
 
 
 
 66
 67config REGULATOR_GPIO
 68	tristate "GPIO regulator support"
 69	depends on GENERIC_GPIO
 
 
 
 
 
 
 
 70	help
 71	  This driver provides support for regulators that can be
 72	  controlled via gpios.
 73	  It is capable of supporting current and voltage regulators
 74	  and the platform has to provide a mapping of GPIO-states
 75	  to target volts/amps.
 
 
 
 
 
 
 76
 77config REGULATOR_AD5398
 78	tristate "Analog Devices AD5398/AD5821 regulators"
 79	depends on I2C
 80	help
 81	  This driver supports AD5398 and AD5821 current regulator chips.
 82	  If building into module, its name is ad5398.ko.
 83
 
 
 
 
 
 
 
 
 84config REGULATOR_AAT2870
 85	tristate "AnalogicTech AAT2870 Regulators"
 86	depends on MFD_AAT2870_CORE
 87	help
 88	  If you have a AnalogicTech AAT2870 say Y to enable the
 89	  regulator driver.
 90
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 91config REGULATOR_DA903X
 92	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 93	depends on PMIC_DA903X
 94	help
 95	  Say y here to support the BUCKs and LDOs regulators found on
 96	  Dialog Semiconductor DA9030/DA9034 PMIC.
 97
 98config REGULATOR_DA9052
 99	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
100	depends on PMIC_DA9052
101	help
102	  This driver supports the voltage regulators of DA9052-BC and
103	  DA9053-AA/Bx PMIC.
104
105config REGULATOR_ANATOP
106	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
107	depends on MFD_ANATOP
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
108	help
109	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
110	  regulators. It is recommended that this option be
111	  enabled on i.MX6 platform.
 
 
112
113config REGULATOR_MC13XXX_CORE
114	tristate
 
 
 
 
 
 
 
115
116config REGULATOR_MC13783
117	tristate "Freescale MC13783 regulator driver"
118	depends on MFD_MC13783
119	select REGULATOR_MC13XXX_CORE
 
 
 
 
 
 
 
 
 
 
120	help
121	  Say y here to support the regulators found on the Freescale MC13783
122	  PMIC.
123
124config REGULATOR_MC13892
125	tristate "Freescale MC13892 regulator driver"
126	depends on MFD_MC13XXX
127	select REGULATOR_MC13XXX_CORE
128	help
129	  Say y here to support the regulators found on the Freescale MC13892
130	  PMIC.
131
132config REGULATOR_ISL6271A
133	tristate "Intersil ISL6271A Power regulator"
134	depends on I2C
135	help
136	  This driver supports ISL6271A voltage regulator chip.
137
138config REGULATOR_88PM8607
139	bool "Marvell 88PM8607 Power regulators"
140	depends on MFD_88PM860X=y
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
141	help
142	  This driver supports 88PM8607 voltage regulator chips.
 
 
 
 
 
 
 
 
 
143
144config REGULATOR_MAX1586
145	tristate "Maxim 1586/1587 voltage regulator"
146	depends on I2C
147	help
148	  This driver controls a Maxim 1586 or 1587 voltage output
149	  regulator via I2C bus. The provided regulator is suitable
150	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
151
 
 
 
 
 
 
 
 
 
152config REGULATOR_MAX8649
153	tristate "Maxim 8649 voltage regulator"
154	depends on I2C
155	select REGMAP_I2C
156	help
157	  This driver controls a Maxim 8649 voltage output regulator via
158	  I2C bus.
159
160config REGULATOR_MAX8660
161	tristate "Maxim 8660/8661 voltage regulator"
162	depends on I2C
163	help
164	  This driver controls a Maxim 8660/8661 voltage output
165	  regulator via I2C bus.
166
 
 
 
 
 
 
 
 
167config REGULATOR_MAX8925
168	tristate "Maxim MAX8925 Power Management IC"
169	depends on MFD_MAX8925
170	help
171	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
172
173config REGULATOR_MAX8952
174	tristate "Maxim MAX8952 Power Management IC"
175	depends on I2C
176	help
177	  This driver controls a Maxim 8952 voltage output regulator
178	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
179	  modes ranging from 0.77V to 1.40V by 0.01V steps.
180
 
 
 
 
 
 
 
 
 
 
181config REGULATOR_MAX8997
182	tristate "Maxim 8997/8966 regulator"
183	depends on MFD_MAX8997
184	help
185	  This driver controls a Maxim 8997/8966 regulator
186	  via I2C bus. The provided regulator is suitable for S5PC110,
187	  S5PV210, and Exynos-4 chips to control VCC_CORE and
188	  VCC_USIM voltages.
189
190config REGULATOR_MAX8998
191	tristate "Maxim 8998 voltage regulator"
192	depends on MFD_MAX8998
193	help
194	  This driver controls a Maxim 8998 voltage output regulator
195	  via I2C bus. The provided regulator is suitable for S3C6410
196	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
197
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
198config REGULATOR_PCAP
199	tristate "Motorola PCAP2 regulator driver"
200	depends on EZX_PCAP
201	help
202	 This driver provides support for the voltage regulators of the
203	 PCAP2 PMIC.
204
205config REGULATOR_LP3971
206	tristate "National Semiconductors LP3971 PMIC regulator driver"
 
 
 
 
 
 
 
207	depends on I2C
 
208	help
209	 Say Y here to support the voltage regulators and convertors
210	 on National Semiconductors LP3971 PMIC
211
212config REGULATOR_LP3972
213	tristate "National Semiconductors LP3972 PMIC regulator driver"
214	depends on I2C
 
215	help
216	 Say Y here to support the voltage regulators and convertors
217	 on National Semiconductors LP3972 PMIC
218
219config REGULATOR_PCF50633
220	tristate "NXP PCF50633 regulator driver"
221        depends on MFD_PCF50633
 
222	help
223	 Say Y here to support the voltage regulators and convertors
224	 on PCF50633
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
225
226config REGULATOR_RC5T583
227	tristate "RICOH RC5T583 Power regulators"
228	depends on MFD_RC5T583
229	help
230	  Select this option to enable the power regulator of RICOH
231	  PMIC RC5T583.
232	  This driver supports the control of different power rails of device
233	  through regulator interface. The device supports multiple DCDC/LDO
234	  outputs which can be controlled by i2c communication.
235
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
236config REGULATOR_S5M8767
237	tristate "Samsung S5M8767A voltage regulator"
238	depends on MFD_S5M_CORE
239	help
240	 This driver supports a Samsung S5M8767A voltage output regulator
241	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
242	 supports DVS mode with 8bits of output voltage control.
243
244config REGULATOR_AB3100
245	tristate "ST-Ericsson AB3100 Regulator functions"
246	depends on AB3100_CORE
247	default y if AB3100_CORE
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
248	help
249	 These regulators correspond to functionality in the
250	 AB3100 analog baseband dealing with power regulators
251	 for the system.
252
253config REGULATOR_AB8500
254	bool "ST-Ericsson AB8500 Power Regulators"
255	depends on AB8500_CORE
 
256	help
257	  This driver supports the regulators found on the ST-Ericsson mixed
258	  signal AB8500 PMIC
259
260config REGULATOR_DBX500_PRCMU
261	bool
262
263config REGULATOR_DB8500_PRCMU
264	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
265	depends on MFD_DB8500_PRCMU
266	select REGULATOR_DBX500_PRCMU
267	help
268	  This driver supports the voltage domain regulators controlled by the
269	  DB8500 PRCMU
270
271config REGULATOR_PALMAS
272	tristate "TI Palmas PMIC Regulators"
273	depends on MFD_PALMAS
274	help
275	  If you wish to control the regulators on the Palmas series of
276	  chips say Y here. This will enable support for all the software
277	  controllable SMPS/LDO regulators.
278
279	  The regulators available on Palmas series chips vary depending
280	  on the muxing. This is handled automatically in the driver by
281	  reading the mux info from OTP.
282
283config REGULATOR_TPS6105X
284	tristate "TI TPS6105X Power regulators"
285	depends on TPS6105X
286	default y if TPS6105X
287	help
288	  This driver supports TPS61050/TPS61052 voltage regulator chips.
289	  It is a single boost converter primarily for white LEDs and
290	  audio amplifiers.
291
292config REGULATOR_TPS62360
293	tristate "TI TPS6236x Power Regulator"
294	depends on I2C
295	select REGMAP_I2C
296	help
297	  This driver supports TPS6236x voltage regulator chip. This
298	  regulator is meant for processor core supply. This chip is
299	  high-frequency synchronous step down dc-dc converter optimized
300	  for battery-powered portable applications.
301
302config REGULATOR_TPS65023
303	tristate "TI TPS65023 Power regulators"
304	depends on I2C
305	select REGMAP_I2C
306	help
307	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
308	  three step-down converters and two general-purpose LDO voltage regulators.
309	  It supports TI's software based Class-2 SmartReflex implementation.
310
311config REGULATOR_TPS6507X
312	tristate "TI TPS6507X Power regulators"
313	depends on I2C
314	help
315	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
316	  three step-down converters and two general-purpose LDO voltage regulators.
317	  It supports TI's software based Class-2 SmartReflex implementation.
318
 
 
 
 
 
 
 
319config REGULATOR_TPS65090
320	tristate "TI TPS65090 Power regulator"
321	depends on MFD_TPS65090
322	help
323	  This driver provides support for the voltage regulators on the
324	  TI TPS65090 PMIC.
325
326config REGULATOR_TPS65217
327	tristate "TI TPS65217 Power regulators"
328	depends on MFD_TPS65217
329	help
330	  This driver supports TPS65217 voltage regulator chips. TPS65217
331	  provides three step-down converters and four general-purpose LDO
332	  voltage regulators. It supports software based voltage control
333	  for different voltage domains
334
 
 
 
 
 
 
 
 
 
335config REGULATOR_TPS6524X
336	tristate "TI TPS6524X Power regulators"
337	depends on SPI
338	help
339	  This driver supports TPS6524X voltage regulator chips. TPS6524X
340	  provides three step-down converters and two general-purpose LDO
341	  voltage regulators.  This device is interfaced using a customized
342	  serial interface currently supported on the sequencer serial
343	  port controller.
344
345config REGULATOR_TPS6586X
346	tristate "TI TPS6586X Power regulators"
347	depends on MFD_TPS6586X
348	help
349	  This driver supports TPS6586X voltage regulator chips.
350
351config REGULATOR_TPS65910
352	tristate "TI TPS65910/TPS65911 Power Regulators"
353	depends on MFD_TPS65910
354	help
355	  This driver supports TPS65910/TPS65911 voltage regulator chips.
356
357config REGULATOR_TPS65912
358	tristate "TI TPS65912 Power regulator"
359	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
360	help
361	    This driver supports TPS65912 voltage regulator chip.
362
 
 
 
 
 
 
 
 
 
363config REGULATOR_TWL4030
364	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
365	depends on TWL4030_CORE
366	help
367	  This driver supports the voltage regulators provided by
368	  this family of companion chips.
369
 
 
 
 
 
 
 
370config REGULATOR_WM831X
371	tristate "Wolfson Microelectronics WM831x PMIC regulators"
372	depends on MFD_WM831X
373	help
374	  Support the voltage and current regulators of the WM831x series
375	  of PMIC devices.
376
377config REGULATOR_WM8350
378	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
379	depends on MFD_WM8350
380	help
381	  This driver provides support for the voltage and current regulators
382          of the WM8350 AudioPlus PMIC.
383
384config REGULATOR_WM8400
385	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
386	depends on MFD_WM8400
387	help
388	  This driver provides support for the voltage regulators of the
389	  WM8400 AudioPlus PMIC.
390
391config REGULATOR_WM8994
392	tristate "Wolfson Microelectronics WM8994 CODEC"
393	depends on MFD_WM8994
394	help
395	  This driver provides support for the voltage regulators on the
396	  WM8994 CODEC.
397
398endif
399