Loading...
1/******************************************************************************
2 *
3 * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#define EXPORT_ACPI_INTERFACES
45
46#include <acpi/acpi.h>
47#include "accommon.h"
48
49#define _COMPONENT ACPI_HARDWARE
50ACPI_MODULE_NAME("hwxfsleep")
51
52/* Local prototypes */
53#if (!ACPI_REDUCED_HARDWARE)
54static acpi_status
55acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs,
56 acpi_physical_address physical_address,
57 acpi_physical_address physical_address64);
58#endif
59
60static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
61
62/*
63 * Dispatch table used to efficiently branch to the various sleep
64 * functions.
65 */
66#define ACPI_SLEEP_FUNCTION_ID 0
67#define ACPI_WAKE_PREP_FUNCTION_ID 1
68#define ACPI_WAKE_FUNCTION_ID 2
69
70/* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */
71
72static struct acpi_sleep_functions acpi_sleep_dispatch[] = {
73 {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep),
74 acpi_hw_extended_sleep},
75 {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep),
76 acpi_hw_extended_wake_prep},
77 {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake}
78};
79
80/*
81 * These functions are removed for the ACPI_REDUCED_HARDWARE case:
82 * acpi_set_firmware_waking_vector
83 * acpi_enter_sleep_state_s4bios
84 */
85
86#if (!ACPI_REDUCED_HARDWARE)
87/*******************************************************************************
88 *
89 * FUNCTION: acpi_hw_set_firmware_waking_vector
90 *
91 * PARAMETERS: facs - Pointer to FACS table
92 * physical_address - 32-bit physical address of ACPI real mode
93 * entry point
94 * physical_address64 - 64-bit physical address of ACPI protected
95 * mode entry point
96 *
97 * RETURN: Status
98 *
99 * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
100 *
101 ******************************************************************************/
102
103static acpi_status
104acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs,
105 acpi_physical_address physical_address,
106 acpi_physical_address physical_address64)
107{
108 ACPI_FUNCTION_TRACE(acpi_hw_set_firmware_waking_vector);
109
110
111 /*
112 * According to the ACPI specification 2.0c and later, the 64-bit
113 * waking vector should be cleared and the 32-bit waking vector should
114 * be used, unless we want the wake-up code to be called by the BIOS in
115 * Protected Mode. Some systems (for example HP dv5-1004nr) are known
116 * to fail to resume if the 64-bit vector is used.
117 */
118
119 /* Set the 32-bit vector */
120
121 facs->firmware_waking_vector = (u32)physical_address;
122
123 if (facs->length > 32) {
124 if (facs->version >= 1) {
125
126 /* Set the 64-bit vector */
127
128 facs->xfirmware_waking_vector = physical_address64;
129 } else {
130 /* Clear the 64-bit vector if it exists */
131
132 facs->xfirmware_waking_vector = 0;
133 }
134 }
135
136 return_ACPI_STATUS(AE_OK);
137}
138
139/*******************************************************************************
140 *
141 * FUNCTION: acpi_set_firmware_waking_vector
142 *
143 * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode
144 * entry point
145 * physical_address64 - 64-bit physical address of ACPI protected
146 * mode entry point
147 *
148 * RETURN: Status
149 *
150 * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
151 *
152 ******************************************************************************/
153
154acpi_status
155acpi_set_firmware_waking_vector(acpi_physical_address physical_address,
156 acpi_physical_address physical_address64)
157{
158
159 ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
160
161 if (acpi_gbl_FACS) {
162 (void)acpi_hw_set_firmware_waking_vector(acpi_gbl_FACS,
163 physical_address,
164 physical_address64);
165 }
166
167 return_ACPI_STATUS(AE_OK);
168}
169
170ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
171
172/*******************************************************************************
173 *
174 * FUNCTION: acpi_enter_sleep_state_s4bios
175 *
176 * PARAMETERS: None
177 *
178 * RETURN: Status
179 *
180 * DESCRIPTION: Perform a S4 bios request.
181 * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
182 *
183 ******************************************************************************/
184acpi_status acpi_enter_sleep_state_s4bios(void)
185{
186 u32 in_value;
187 acpi_status status;
188
189 ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
190
191 /* Clear the wake status bit (PM1) */
192
193 status =
194 acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
195 if (ACPI_FAILURE(status)) {
196 return_ACPI_STATUS(status);
197 }
198
199 status = acpi_hw_clear_acpi_status();
200 if (ACPI_FAILURE(status)) {
201 return_ACPI_STATUS(status);
202 }
203
204 /*
205 * 1) Disable/Clear all GPEs
206 * 2) Enable all wakeup GPEs
207 */
208 status = acpi_hw_disable_all_gpes();
209 if (ACPI_FAILURE(status)) {
210 return_ACPI_STATUS(status);
211 }
212 acpi_gbl_system_awake_and_running = FALSE;
213
214 status = acpi_hw_enable_all_wakeup_gpes();
215 if (ACPI_FAILURE(status)) {
216 return_ACPI_STATUS(status);
217 }
218
219 ACPI_FLUSH_CPU_CACHE();
220
221 status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
222 (u32)acpi_gbl_FADT.s4_bios_request, 8);
223
224 do {
225 acpi_os_stall(ACPI_USEC_PER_MSEC);
226 status =
227 acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
228 if (ACPI_FAILURE(status)) {
229 return_ACPI_STATUS(status);
230 }
231
232 } while (!in_value);
233
234 return_ACPI_STATUS(AE_OK);
235}
236
237ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
238#endif /* !ACPI_REDUCED_HARDWARE */
239/*******************************************************************************
240 *
241 * FUNCTION: acpi_hw_sleep_dispatch
242 *
243 * PARAMETERS: sleep_state - Which sleep state to enter/exit
244 * function_id - Sleep, wake_prep, or Wake
245 *
246 * RETURN: Status from the invoked sleep handling function.
247 *
248 * DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling
249 * function.
250 *
251 ******************************************************************************/
252static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
253{
254 acpi_status status;
255 struct acpi_sleep_functions *sleep_functions =
256 &acpi_sleep_dispatch[function_id];
257
258#if (!ACPI_REDUCED_HARDWARE)
259 /*
260 * If the Hardware Reduced flag is set (from the FADT), we must
261 * use the extended sleep registers (FADT). Note: As per the ACPI
262 * specification, these extended registers are to be used for HW-reduced
263 * platforms only. They are not general-purpose replacements for the
264 * legacy PM register sleep support.
265 */
266 if (acpi_gbl_reduced_hardware) {
267 status = sleep_functions->extended_function(sleep_state);
268 } else {
269 /* Legacy sleep */
270
271 status = sleep_functions->legacy_function(sleep_state);
272 }
273
274 return (status);
275
276#else
277 /*
278 * For the case where reduced-hardware-only code is being generated,
279 * we know that only the extended sleep registers are available
280 */
281 status = sleep_functions->extended_function(sleep_state);
282 return (status);
283
284#endif /* !ACPI_REDUCED_HARDWARE */
285}
286
287/*******************************************************************************
288 *
289 * FUNCTION: acpi_enter_sleep_state_prep
290 *
291 * PARAMETERS: sleep_state - Which sleep state to enter
292 *
293 * RETURN: Status
294 *
295 * DESCRIPTION: Prepare to enter a system sleep state.
296 * This function must execute with interrupts enabled.
297 * We break sleeping into 2 stages so that OSPM can handle
298 * various OS-specific tasks between the two steps.
299 *
300 ******************************************************************************/
301
302acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
303{
304 acpi_status status;
305 struct acpi_object_list arg_list;
306 union acpi_object arg;
307 u32 sst_value;
308
309 ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
310
311 status = acpi_get_sleep_type_data(sleep_state,
312 &acpi_gbl_sleep_type_a,
313 &acpi_gbl_sleep_type_b);
314 if (ACPI_FAILURE(status)) {
315 return_ACPI_STATUS(status);
316 }
317
318 /* Execute the _PTS method (Prepare To Sleep) */
319
320 arg_list.count = 1;
321 arg_list.pointer = &arg;
322 arg.type = ACPI_TYPE_INTEGER;
323 arg.integer.value = sleep_state;
324
325 status =
326 acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL);
327 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
328 return_ACPI_STATUS(status);
329 }
330
331 /* Setup the argument to the _SST method (System STatus) */
332
333 switch (sleep_state) {
334 case ACPI_STATE_S0:
335
336 sst_value = ACPI_SST_WORKING;
337 break;
338
339 case ACPI_STATE_S1:
340 case ACPI_STATE_S2:
341 case ACPI_STATE_S3:
342
343 sst_value = ACPI_SST_SLEEPING;
344 break;
345
346 case ACPI_STATE_S4:
347
348 sst_value = ACPI_SST_SLEEP_CONTEXT;
349 break;
350
351 default:
352
353 sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */
354 break;
355 }
356
357 /*
358 * Set the system indicators to show the desired sleep state.
359 * _SST is an optional method (return no error if not found)
360 */
361 acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value);
362 return_ACPI_STATUS(AE_OK);
363}
364
365ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
366
367/*******************************************************************************
368 *
369 * FUNCTION: acpi_enter_sleep_state
370 *
371 * PARAMETERS: sleep_state - Which sleep state to enter
372 *
373 * RETURN: Status
374 *
375 * DESCRIPTION: Enter a system sleep state
376 * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
377 *
378 ******************************************************************************/
379acpi_status acpi_enter_sleep_state(u8 sleep_state)
380{
381 acpi_status status;
382
383 ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
384
385 if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
386 (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
387 ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
388 acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
389 return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
390 }
391
392 status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
393 return_ACPI_STATUS(status);
394}
395
396ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
397
398/*******************************************************************************
399 *
400 * FUNCTION: acpi_leave_sleep_state_prep
401 *
402 * PARAMETERS: sleep_state - Which sleep state we are exiting
403 *
404 * RETURN: Status
405 *
406 * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
407 * sleep. Called with interrupts DISABLED.
408 * We break wake/resume into 2 stages so that OSPM can handle
409 * various OS-specific tasks between the two steps.
410 *
411 ******************************************************************************/
412acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
413{
414 acpi_status status;
415
416 ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
417
418 status =
419 acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID);
420 return_ACPI_STATUS(status);
421}
422
423ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep)
424
425/*******************************************************************************
426 *
427 * FUNCTION: acpi_leave_sleep_state
428 *
429 * PARAMETERS: sleep_state - Which sleep state we are exiting
430 *
431 * RETURN: Status
432 *
433 * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
434 * Called with interrupts ENABLED.
435 *
436 ******************************************************************************/
437acpi_status acpi_leave_sleep_state(u8 sleep_state)
438{
439 acpi_status status;
440
441 ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
442
443 status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_FUNCTION_ID);
444 return_ACPI_STATUS(status);
445}
446
447ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)
1/******************************************************************************
2 *
3 * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2012, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include <linux/module.h>
47
48#define _COMPONENT ACPI_HARDWARE
49ACPI_MODULE_NAME("hwxfsleep")
50
51/* Local prototypes */
52static acpi_status
53acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id);
54
55/*
56 * Dispatch table used to efficiently branch to the various sleep
57 * functions.
58 */
59#define ACPI_SLEEP_FUNCTION_ID 0
60#define ACPI_WAKE_PREP_FUNCTION_ID 1
61#define ACPI_WAKE_FUNCTION_ID 2
62
63/* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */
64
65static struct acpi_sleep_functions acpi_sleep_dispatch[] = {
66 {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep),
67 acpi_hw_extended_sleep},
68 {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep),
69 acpi_hw_extended_wake_prep},
70 {ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake}
71};
72
73/*
74 * These functions are removed for the ACPI_REDUCED_HARDWARE case:
75 * acpi_set_firmware_waking_vector
76 * acpi_set_firmware_waking_vector64
77 * acpi_enter_sleep_state_s4bios
78 */
79
80#if (!ACPI_REDUCED_HARDWARE)
81/*******************************************************************************
82 *
83 * FUNCTION: acpi_set_firmware_waking_vector
84 *
85 * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode
86 * entry point.
87 *
88 * RETURN: Status
89 *
90 * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS
91 *
92 ******************************************************************************/
93
94acpi_status acpi_set_firmware_waking_vector(u32 physical_address)
95{
96 ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
97
98
99 /*
100 * According to the ACPI specification 2.0c and later, the 64-bit
101 * waking vector should be cleared and the 32-bit waking vector should
102 * be used, unless we want the wake-up code to be called by the BIOS in
103 * Protected Mode. Some systems (for example HP dv5-1004nr) are known
104 * to fail to resume if the 64-bit vector is used.
105 */
106
107 /* Set the 32-bit vector */
108
109 acpi_gbl_FACS->firmware_waking_vector = physical_address;
110
111 /* Clear the 64-bit vector if it exists */
112
113 if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) {
114 acpi_gbl_FACS->xfirmware_waking_vector = 0;
115 }
116
117 return_ACPI_STATUS(AE_OK);
118}
119
120ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
121
122#if ACPI_MACHINE_WIDTH == 64
123/*******************************************************************************
124 *
125 * FUNCTION: acpi_set_firmware_waking_vector64
126 *
127 * PARAMETERS: physical_address - 64-bit physical address of ACPI protected
128 * mode entry point.
129 *
130 * RETURN: Status
131 *
132 * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if
133 * it exists in the table. This function is intended for use with
134 * 64-bit host operating systems.
135 *
136 ******************************************************************************/
137acpi_status acpi_set_firmware_waking_vector64(u64 physical_address)
138{
139 ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64);
140
141
142 /* Determine if the 64-bit vector actually exists */
143
144 if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) {
145 return_ACPI_STATUS(AE_NOT_EXIST);
146 }
147
148 /* Clear 32-bit vector, set the 64-bit X_ vector */
149
150 acpi_gbl_FACS->firmware_waking_vector = 0;
151 acpi_gbl_FACS->xfirmware_waking_vector = physical_address;
152 return_ACPI_STATUS(AE_OK);
153}
154
155ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64)
156#endif
157
158/*******************************************************************************
159 *
160 * FUNCTION: acpi_enter_sleep_state_s4bios
161 *
162 * PARAMETERS: None
163 *
164 * RETURN: Status
165 *
166 * DESCRIPTION: Perform a S4 bios request.
167 * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
168 *
169 ******************************************************************************/
170acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)
171{
172 u32 in_value;
173 acpi_status status;
174
175 ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
176
177 /* Clear the wake status bit (PM1) */
178
179 status =
180 acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
181 if (ACPI_FAILURE(status)) {
182 return_ACPI_STATUS(status);
183 }
184
185 status = acpi_hw_clear_acpi_status();
186 if (ACPI_FAILURE(status)) {
187 return_ACPI_STATUS(status);
188 }
189
190 /*
191 * 1) Disable/Clear all GPEs
192 * 2) Enable all wakeup GPEs
193 */
194 status = acpi_hw_disable_all_gpes();
195 if (ACPI_FAILURE(status)) {
196 return_ACPI_STATUS(status);
197 }
198 acpi_gbl_system_awake_and_running = FALSE;
199
200 status = acpi_hw_enable_all_wakeup_gpes();
201 if (ACPI_FAILURE(status)) {
202 return_ACPI_STATUS(status);
203 }
204
205 ACPI_FLUSH_CPU_CACHE();
206
207 status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
208 (u32)acpi_gbl_FADT.S4bios_request, 8);
209
210 do {
211 acpi_os_stall(1000);
212 status =
213 acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
214 if (ACPI_FAILURE(status)) {
215 return_ACPI_STATUS(status);
216 }
217 } while (!in_value);
218
219 return_ACPI_STATUS(AE_OK);
220}
221
222ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
223#endif /* !ACPI_REDUCED_HARDWARE */
224/*******************************************************************************
225 *
226 * FUNCTION: acpi_hw_sleep_dispatch
227 *
228 * PARAMETERS: sleep_state - Which sleep state to enter/exit
229 * function_id - Sleep, wake_prep, or Wake
230 *
231 * RETURN: Status from the invoked sleep handling function.
232 *
233 * DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling
234 * function.
235 *
236 ******************************************************************************/
237static acpi_status
238acpi_hw_sleep_dispatch(u8 sleep_state, u8 flags, u32 function_id)
239{
240 acpi_status status;
241 struct acpi_sleep_functions *sleep_functions =
242 &acpi_sleep_dispatch[function_id];
243
244#if (!ACPI_REDUCED_HARDWARE)
245
246 /*
247 * If the Hardware Reduced flag is set (from the FADT), we must
248 * use the extended sleep registers
249 */
250 if (acpi_gbl_reduced_hardware || acpi_gbl_FADT.sleep_control.address) {
251 status = sleep_functions->extended_function(sleep_state, flags);
252 } else {
253 /* Legacy sleep */
254
255 status = sleep_functions->legacy_function(sleep_state, flags);
256 }
257
258 return (status);
259
260#else
261 /*
262 * For the case where reduced-hardware-only code is being generated,
263 * we know that only the extended sleep registers are available
264 */
265 status = sleep_functions->extended_function(sleep_state, flags);
266 return (status);
267
268#endif /* !ACPI_REDUCED_HARDWARE */
269}
270
271/*******************************************************************************
272 *
273 * FUNCTION: acpi_enter_sleep_state_prep
274 *
275 * PARAMETERS: sleep_state - Which sleep state to enter
276 *
277 * RETURN: Status
278 *
279 * DESCRIPTION: Prepare to enter a system sleep state.
280 * This function must execute with interrupts enabled.
281 * We break sleeping into 2 stages so that OSPM can handle
282 * various OS-specific tasks between the two steps.
283 *
284 ******************************************************************************/
285
286acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
287{
288 acpi_status status;
289 struct acpi_object_list arg_list;
290 union acpi_object arg;
291 u32 sst_value;
292
293 ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
294
295 status = acpi_get_sleep_type_data(sleep_state,
296 &acpi_gbl_sleep_type_a,
297 &acpi_gbl_sleep_type_b);
298 if (ACPI_FAILURE(status)) {
299 return_ACPI_STATUS(status);
300 }
301
302 /* Execute the _PTS method (Prepare To Sleep) */
303
304 arg_list.count = 1;
305 arg_list.pointer = &arg;
306 arg.type = ACPI_TYPE_INTEGER;
307 arg.integer.value = sleep_state;
308
309 status =
310 acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL);
311 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
312 return_ACPI_STATUS(status);
313 }
314
315 /* Setup the argument to the _SST method (System STatus) */
316
317 switch (sleep_state) {
318 case ACPI_STATE_S0:
319 sst_value = ACPI_SST_WORKING;
320 break;
321
322 case ACPI_STATE_S1:
323 case ACPI_STATE_S2:
324 case ACPI_STATE_S3:
325 sst_value = ACPI_SST_SLEEPING;
326 break;
327
328 case ACPI_STATE_S4:
329 sst_value = ACPI_SST_SLEEP_CONTEXT;
330 break;
331
332 default:
333 sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */
334 break;
335 }
336
337 /*
338 * Set the system indicators to show the desired sleep state.
339 * _SST is an optional method (return no error if not found)
340 */
341 acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value);
342 return_ACPI_STATUS(AE_OK);
343}
344
345ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
346
347/*******************************************************************************
348 *
349 * FUNCTION: acpi_enter_sleep_state
350 *
351 * PARAMETERS: sleep_state - Which sleep state to enter
352 * Flags - ACPI_EXECUTE_GTS to run optional method
353 *
354 * RETURN: Status
355 *
356 * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231)
357 * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
358 *
359 ******************************************************************************/
360acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags)
361{
362 acpi_status status;
363
364 ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
365
366 if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
367 (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
368 ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
369 acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
370 return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
371 }
372
373 status =
374 acpi_hw_sleep_dispatch(sleep_state, flags, ACPI_SLEEP_FUNCTION_ID);
375 return_ACPI_STATUS(status);
376}
377
378ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
379
380/*******************************************************************************
381 *
382 * FUNCTION: acpi_leave_sleep_state_prep
383 *
384 * PARAMETERS: sleep_state - Which sleep state we are exiting
385 * Flags - ACPI_EXECUTE_BFS to run optional method
386 *
387 * RETURN: Status
388 *
389 * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
390 * sleep.
391 * Called with interrupts DISABLED.
392 *
393 ******************************************************************************/
394acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags)
395{
396 acpi_status status;
397
398 ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
399
400 status =
401 acpi_hw_sleep_dispatch(sleep_state, flags,
402 ACPI_WAKE_PREP_FUNCTION_ID);
403 return_ACPI_STATUS(status);
404}
405
406ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep)
407
408/*******************************************************************************
409 *
410 * FUNCTION: acpi_leave_sleep_state
411 *
412 * PARAMETERS: sleep_state - Which sleep state we are exiting
413 *
414 * RETURN: Status
415 *
416 * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
417 * Called with interrupts ENABLED.
418 *
419 ******************************************************************************/
420acpi_status acpi_leave_sleep_state(u8 sleep_state)
421{
422 acpi_status status;
423
424 ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
425
426
427 status = acpi_hw_sleep_dispatch(sleep_state, 0, ACPI_WAKE_FUNCTION_ID);
428 return_ACPI_STATUS(status);
429}
430
431ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)