Loading...
1/*
2 * linux/arch/arm/mach-pxa/lubbock.c
3 *
4 * Support for the Intel DBPXA250 Development Platform.
5 *
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14#include <linux/clkdev.h>
15#include <linux/gpio.h>
16#include <linux/gpio/machine.h>
17#include <linux/module.h>
18#include <linux/kernel.h>
19#include <linux/init.h>
20#include <linux/io.h>
21#include <linux/platform_device.h>
22#include <linux/syscore_ops.h>
23#include <linux/major.h>
24#include <linux/fb.h>
25#include <linux/interrupt.h>
26#include <linux/mtd/mtd.h>
27#include <linux/mtd/partitions.h>
28#include <linux/smc91x.h>
29#include <linux/slab.h>
30#include <linux/leds.h>
31
32#include <linux/spi/spi.h>
33#include <linux/spi/ads7846.h>
34#include <linux/spi/pxa2xx_spi.h>
35
36#include <asm/setup.h>
37#include <asm/memory.h>
38#include <asm/mach-types.h>
39#include <mach/hardware.h>
40#include <asm/irq.h>
41#include <asm/sizes.h>
42
43#include <asm/mach/arch.h>
44#include <asm/mach/map.h>
45#include <asm/mach/irq.h>
46#include <asm/mach/flash.h>
47
48#include <asm/hardware/sa1111.h>
49
50#include "pxa25x.h"
51#include <mach/audio.h>
52#include <mach/lubbock.h>
53#include "udc.h"
54#include <linux/platform_data/irda-pxaficp.h>
55#include <linux/platform_data/video-pxafb.h>
56#include <linux/platform_data/mmc-pxamci.h>
57#include "pm.h"
58#include <mach/smemc.h>
59
60#include "generic.h"
61#include "devices.h"
62
63static unsigned long lubbock_pin_config[] __initdata = {
64 GPIO15_nCS_1, /* CS1 - Flash */
65 GPIO78_nCS_2, /* CS2 - Baseboard FGPA */
66 GPIO79_nCS_3, /* CS3 - SMC ethernet */
67 GPIO80_nCS_4, /* CS4 - SA1111 */
68
69 /* SSP data pins */
70 GPIO23_SSP1_SCLK,
71 GPIO25_SSP1_TXD,
72 GPIO26_SSP1_RXD,
73
74 /* AC97 */
75 GPIO28_AC97_BITCLK,
76 GPIO29_AC97_SDATA_IN_0,
77 GPIO30_AC97_SDATA_OUT,
78 GPIO31_AC97_SYNC,
79
80 /* LCD - 16bpp DSTN */
81 GPIOxx_LCD_DSTN_16BPP,
82
83 /* BTUART */
84 GPIO42_BTUART_RXD,
85 GPIO43_BTUART_TXD,
86 GPIO44_BTUART_CTS,
87 GPIO45_BTUART_RTS,
88
89 /* PC Card */
90 GPIO48_nPOE,
91 GPIO49_nPWE,
92 GPIO50_nPIOR,
93 GPIO51_nPIOW,
94 GPIO52_nPCE_1,
95 GPIO53_nPCE_2,
96 GPIO54_nPSKTSEL,
97 GPIO55_nPREG,
98 GPIO56_nPWAIT,
99 GPIO57_nIOIS16,
100
101 /* MMC */
102 GPIO6_MMC_CLK,
103 GPIO8_MMC_CS0,
104
105 /* SA1111 chip */
106 GPIO11_3_6MHz,
107
108 /* wakeup */
109 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
110};
111
112#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
113#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
114
115void lubbock_set_hexled(uint32_t value)
116{
117 LUB_HEXLED = value;
118}
119
120void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
121{
122 unsigned long flags;
123
124 local_irq_save(flags);
125 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
126 local_irq_restore(flags);
127}
128EXPORT_SYMBOL(lubbock_set_misc_wr);
129
130static int lubbock_udc_is_connected(void)
131{
132 return (LUB_MISC_RD & (1 << 9)) == 0;
133}
134
135static struct pxa2xx_udc_mach_info udc_info __initdata = {
136 .udc_is_connected = lubbock_udc_is_connected,
137 // no D+ pullup; lubbock can't connect/disconnect in software
138};
139
140static struct resource sa1111_resources[] = {
141 [0] = {
142 .start = 0x10000000,
143 .end = 0x10001fff,
144 .flags = IORESOURCE_MEM,
145 },
146 [1] = {
147 .start = LUBBOCK_SA1111_IRQ,
148 .end = LUBBOCK_SA1111_IRQ,
149 .flags = IORESOURCE_IRQ,
150 },
151};
152
153static struct sa1111_platform_data sa1111_info = {
154 .irq_base = LUBBOCK_SA1111_IRQ_BASE,
155 .disable_devs = SA1111_DEVID_SAC,
156};
157
158static struct platform_device sa1111_device = {
159 .name = "sa1111",
160 .id = -1,
161 .num_resources = ARRAY_SIZE(sa1111_resources),
162 .resource = sa1111_resources,
163 .dev = {
164 .platform_data = &sa1111_info,
165 },
166};
167
168/* ADS7846 is connected through SSP ... and if your board has J5 populated,
169 * you can select it to replace the ucb1400 by switching the touchscreen cable
170 * (to J5) and poking board registers (as done below). Else it's only useful
171 * for the temperature sensors.
172 */
173static struct pxa2xx_spi_master pxa_ssp_master_info = {
174 .num_chipselect = 1,
175};
176
177static int lubbock_ads7846_pendown_state(void)
178{
179 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
180 return 0;
181}
182
183static struct ads7846_platform_data ads_info = {
184 .model = 7846,
185 .vref_delay_usecs = 100, /* internal, no cap */
186 .get_pendown_state = lubbock_ads7846_pendown_state,
187 // .x_plate_ohms = 500, /* GUESS! */
188 // .y_plate_ohms = 500, /* GUESS! */
189};
190
191static void ads7846_cs(u32 command)
192{
193 static const unsigned TS_nCS = 1 << 11;
194 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
195}
196
197static struct pxa2xx_spi_chip ads_hw = {
198 .tx_threshold = 1,
199 .rx_threshold = 2,
200 .cs_control = ads7846_cs,
201};
202
203static struct spi_board_info spi_board_info[] __initdata = { {
204 .modalias = "ads7846",
205 .platform_data = &ads_info,
206 .controller_data = &ads_hw,
207 .irq = LUBBOCK_BB_IRQ,
208 .max_speed_hz = 120000 /* max sample rate at 3V */
209 * 26 /* command + data + overhead */,
210 .bus_num = 1,
211 .chip_select = 0,
212},
213};
214
215static struct resource smc91x_resources[] = {
216 [0] = {
217 .name = "smc91x-regs",
218 .start = 0x0c000c00,
219 .end = 0x0c0fffff,
220 .flags = IORESOURCE_MEM,
221 },
222 [1] = {
223 .start = LUBBOCK_ETH_IRQ,
224 .end = LUBBOCK_ETH_IRQ,
225 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
226 },
227 [2] = {
228 .name = "smc91x-attrib",
229 .start = 0x0e000000,
230 .end = 0x0e0fffff,
231 .flags = IORESOURCE_MEM,
232 },
233};
234
235static struct smc91x_platdata lubbock_smc91x_info = {
236 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
237};
238
239static struct platform_device smc91x_device = {
240 .name = "smc91x",
241 .id = -1,
242 .num_resources = ARRAY_SIZE(smc91x_resources),
243 .resource = smc91x_resources,
244 .dev = {
245 .platform_data = &lubbock_smc91x_info,
246 },
247};
248
249static struct resource flash_resources[] = {
250 [0] = {
251 .start = 0x00000000,
252 .end = SZ_64M - 1,
253 .flags = IORESOURCE_MEM,
254 },
255 [1] = {
256 .start = 0x04000000,
257 .end = 0x04000000 + SZ_64M - 1,
258 .flags = IORESOURCE_MEM,
259 },
260};
261
262static struct mtd_partition lubbock_partitions[] = {
263 {
264 .name = "Bootloader",
265 .size = 0x00040000,
266 .offset = 0,
267 .mask_flags = MTD_WRITEABLE /* force read-only */
268 },{
269 .name = "Kernel",
270 .size = 0x00100000,
271 .offset = 0x00040000,
272 },{
273 .name = "Filesystem",
274 .size = MTDPART_SIZ_FULL,
275 .offset = 0x00140000
276 }
277};
278
279static struct flash_platform_data lubbock_flash_data[2] = {
280 {
281 .map_name = "cfi_probe",
282 .parts = lubbock_partitions,
283 .nr_parts = ARRAY_SIZE(lubbock_partitions),
284 }, {
285 .map_name = "cfi_probe",
286 .parts = NULL,
287 .nr_parts = 0,
288 }
289};
290
291static struct platform_device lubbock_flash_device[2] = {
292 {
293 .name = "pxa2xx-flash",
294 .id = 0,
295 .dev = {
296 .platform_data = &lubbock_flash_data[0],
297 },
298 .resource = &flash_resources[0],
299 .num_resources = 1,
300 },
301 {
302 .name = "pxa2xx-flash",
303 .id = 1,
304 .dev = {
305 .platform_data = &lubbock_flash_data[1],
306 },
307 .resource = &flash_resources[1],
308 .num_resources = 1,
309 },
310};
311
312static struct resource lubbock_cplds_resources[] = {
313 [0] = {
314 .start = LUBBOCK_FPGA_PHYS + 0xc0,
315 .end = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
316 .flags = IORESOURCE_MEM,
317 },
318 [1] = {
319 .start = PXA_GPIO_TO_IRQ(0),
320 .end = PXA_GPIO_TO_IRQ(0),
321 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
322 },
323 [2] = {
324 .start = LUBBOCK_IRQ(0),
325 .end = LUBBOCK_IRQ(6),
326 .flags = IORESOURCE_IRQ,
327 },
328};
329
330static struct platform_device lubbock_cplds_device = {
331 .name = "pxa_cplds_irqs",
332 .id = -1,
333 .resource = &lubbock_cplds_resources[0],
334 .num_resources = 3,
335};
336
337
338static struct platform_device *devices[] __initdata = {
339 &sa1111_device,
340 &smc91x_device,
341 &lubbock_flash_device[0],
342 &lubbock_flash_device[1],
343 &lubbock_cplds_device,
344};
345
346static struct pxafb_mode_info sharp_lm8v31_mode = {
347 .pixclock = 270000,
348 .xres = 640,
349 .yres = 480,
350 .bpp = 16,
351 .hsync_len = 1,
352 .left_margin = 3,
353 .right_margin = 3,
354 .vsync_len = 1,
355 .upper_margin = 0,
356 .lower_margin = 0,
357 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
358 .cmap_greyscale = 0,
359};
360
361static struct pxafb_mach_info sharp_lm8v31 = {
362 .modes = &sharp_lm8v31_mode,
363 .num_modes = 1,
364 .cmap_inverse = 0,
365 .cmap_static = 0,
366 .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
367 LCD_AC_BIAS_FREQ(255),
368};
369
370#define MMC_POLL_RATE msecs_to_jiffies(1000)
371
372static void lubbock_mmc_poll(unsigned long);
373static irq_handler_t mmc_detect_int;
374
375static struct timer_list mmc_timer = {
376 .function = lubbock_mmc_poll,
377};
378
379static void lubbock_mmc_poll(unsigned long data)
380{
381 unsigned long flags;
382
383 /* clear any previous irq state, then ... */
384 local_irq_save(flags);
385 LUB_IRQ_SET_CLR &= ~(1 << 0);
386 local_irq_restore(flags);
387
388 /* poll until mmc/sd card is removed */
389 if (LUB_IRQ_SET_CLR & (1 << 0))
390 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
391 else {
392 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
393 enable_irq(LUBBOCK_SD_IRQ);
394 }
395}
396
397static irqreturn_t lubbock_detect_int(int irq, void *data)
398{
399 /* IRQ is level triggered; disable, and poll for removal */
400 disable_irq(irq);
401 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
402
403 return mmc_detect_int(irq, data);
404}
405
406static int lubbock_mci_init(struct device *dev,
407 irq_handler_t detect_int,
408 void *data)
409{
410 /* detect card insert/eject */
411 mmc_detect_int = detect_int;
412 init_timer(&mmc_timer);
413 mmc_timer.data = (unsigned long) data;
414 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
415 0, "lubbock-sd-detect", data);
416}
417
418static int lubbock_mci_get_ro(struct device *dev)
419{
420 return (LUB_MISC_RD & (1 << 2)) != 0;
421}
422
423static void lubbock_mci_exit(struct device *dev, void *data)
424{
425 free_irq(LUBBOCK_SD_IRQ, data);
426 del_timer_sync(&mmc_timer);
427}
428
429static struct pxamci_platform_data lubbock_mci_platform_data = {
430 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
431 .detect_delay_ms = 10,
432 .init = lubbock_mci_init,
433 .get_ro = lubbock_mci_get_ro,
434 .exit = lubbock_mci_exit,
435 .gpio_card_detect = -1,
436 .gpio_card_ro = -1,
437 .gpio_power = -1,
438};
439
440static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
441{
442 unsigned long flags;
443
444 local_irq_save(flags);
445 if (mode & IR_SIRMODE) {
446 LUB_MISC_WR &= ~(1 << 4);
447 } else if (mode & IR_FIRMODE) {
448 LUB_MISC_WR |= 1 << 4;
449 }
450 pxa2xx_transceiver_mode(dev, mode);
451 local_irq_restore(flags);
452}
453
454static struct pxaficp_platform_data lubbock_ficp_platform_data = {
455 .gpio_pwdown = -1,
456 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
457 .transceiver_mode = lubbock_irda_transceiver_mode,
458};
459
460static void __init lubbock_init(void)
461{
462 int flashboot = (LUB_CONF_SWITCHES & 1);
463
464 pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
465
466 pxa_set_ffuart_info(NULL);
467 pxa_set_btuart_info(NULL);
468 pxa_set_stuart_info(NULL);
469
470 clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
471 pxa_set_udc_info(&udc_info);
472 pxa_set_fb_info(NULL, &sharp_lm8v31);
473 pxa_set_mci_info(&lubbock_mci_platform_data);
474 pxa_set_ficp_info(&lubbock_ficp_platform_data);
475 pxa_set_ac97_info(NULL);
476
477 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
478 (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
479 /* Compensate for the nROMBT switch which swaps the flash banks */
480 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
481 flashboot?"Flash":"ROM", flashboot);
482
483 lubbock_flash_data[flashboot^1].name = "application-flash";
484 lubbock_flash_data[flashboot].name = "boot-rom";
485 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
486
487 pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
488 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
489}
490
491static struct map_desc lubbock_io_desc[] __initdata = {
492 { /* CPLD */
493 .virtual = LUBBOCK_FPGA_VIRT,
494 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
495 .length = 0x00100000,
496 .type = MT_DEVICE
497 }
498};
499
500static void __init lubbock_map_io(void)
501{
502 pxa25x_map_io();
503 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
504
505 PCFR |= PCFR_OPDE;
506}
507
508/*
509 * Driver for the 8 discrete LEDs available for general use:
510 * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
511 * so be sure to not monkey with them here.
512 */
513
514#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
515struct lubbock_led {
516 struct led_classdev cdev;
517 u8 mask;
518};
519
520/*
521 * The triggers lines up below will only be used if the
522 * LED triggers are compiled in.
523 */
524static const struct {
525 const char *name;
526 const char *trigger;
527} lubbock_leds[] = {
528 { "lubbock:D28", "default-on", },
529 { "lubbock:D27", "cpu0", },
530 { "lubbock:D26", "heartbeat" },
531 { "lubbock:D25", },
532 { "lubbock:D24", },
533 { "lubbock:D23", },
534 { "lubbock:D22", },
535 { "lubbock:D21", },
536};
537
538static void lubbock_led_set(struct led_classdev *cdev,
539 enum led_brightness b)
540{
541 struct lubbock_led *led = container_of(cdev,
542 struct lubbock_led, cdev);
543 u32 reg = LUB_DISC_BLNK_LED;
544
545 if (b != LED_OFF)
546 reg |= led->mask;
547 else
548 reg &= ~led->mask;
549
550 LUB_DISC_BLNK_LED = reg;
551}
552
553static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
554{
555 struct lubbock_led *led = container_of(cdev,
556 struct lubbock_led, cdev);
557 u32 reg = LUB_DISC_BLNK_LED;
558
559 return (reg & led->mask) ? LED_FULL : LED_OFF;
560}
561
562static int __init lubbock_leds_init(void)
563{
564 int i;
565
566 if (!machine_is_lubbock())
567 return -ENODEV;
568
569 /* All ON */
570 LUB_DISC_BLNK_LED |= 0xff;
571 for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
572 struct lubbock_led *led;
573
574 led = kzalloc(sizeof(*led), GFP_KERNEL);
575 if (!led)
576 break;
577
578 led->cdev.name = lubbock_leds[i].name;
579 led->cdev.brightness_set = lubbock_led_set;
580 led->cdev.brightness_get = lubbock_led_get;
581 led->cdev.default_trigger = lubbock_leds[i].trigger;
582 led->mask = BIT(i);
583
584 if (led_classdev_register(NULL, &led->cdev) < 0) {
585 kfree(led);
586 break;
587 }
588 }
589
590 return 0;
591}
592
593/*
594 * Since we may have triggers on any subsystem, defer registration
595 * until after subsystem_init.
596 */
597fs_initcall(lubbock_leds_init);
598#endif
599
600MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
601 /* Maintainer: MontaVista Software Inc. */
602 .map_io = lubbock_map_io,
603 .nr_irqs = LUBBOCK_NR_IRQS,
604 .init_irq = pxa25x_init_irq,
605 .handle_irq = pxa25x_handle_irq,
606 .init_time = pxa_timer_init,
607 .init_machine = lubbock_init,
608 .restart = pxa_restart,
609MACHINE_END
1/*
2 * linux/arch/arm/mach-pxa/lubbock.c
3 *
4 * Support for the Intel DBPXA250 Development Platform.
5 *
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14#include <linux/gpio.h>
15#include <linux/module.h>
16#include <linux/kernel.h>
17#include <linux/init.h>
18#include <linux/platform_device.h>
19#include <linux/syscore_ops.h>
20#include <linux/major.h>
21#include <linux/fb.h>
22#include <linux/interrupt.h>
23#include <linux/mtd/mtd.h>
24#include <linux/mtd/partitions.h>
25#include <linux/smc91x.h>
26
27#include <linux/spi/spi.h>
28#include <linux/spi/ads7846.h>
29#include <linux/spi/pxa2xx_spi.h>
30
31#include <asm/setup.h>
32#include <asm/memory.h>
33#include <asm/mach-types.h>
34#include <mach/hardware.h>
35#include <asm/irq.h>
36#include <asm/sizes.h>
37
38#include <asm/mach/arch.h>
39#include <asm/mach/map.h>
40#include <asm/mach/irq.h>
41#include <asm/mach/flash.h>
42
43#include <asm/hardware/sa1111.h>
44
45#include <mach/pxa25x.h>
46#include <mach/audio.h>
47#include <mach/lubbock.h>
48#include <mach/udc.h>
49#include <mach/irda.h>
50#include <mach/pxafb.h>
51#include <mach/mmc.h>
52#include <mach/pm.h>
53#include <mach/smemc.h>
54
55#include "generic.h"
56#include "clock.h"
57#include "devices.h"
58
59static unsigned long lubbock_pin_config[] __initdata = {
60 GPIO15_nCS_1, /* CS1 - Flash */
61 GPIO78_nCS_2, /* CS2 - Baseboard FGPA */
62 GPIO79_nCS_3, /* CS3 - SMC ethernet */
63 GPIO80_nCS_4, /* CS4 - SA1111 */
64
65 /* SSP data pins */
66 GPIO23_SSP1_SCLK,
67 GPIO25_SSP1_TXD,
68 GPIO26_SSP1_RXD,
69
70 /* AC97 */
71 GPIO28_AC97_BITCLK,
72 GPIO29_AC97_SDATA_IN_0,
73 GPIO30_AC97_SDATA_OUT,
74 GPIO31_AC97_SYNC,
75
76 /* LCD - 16bpp DSTN */
77 GPIOxx_LCD_DSTN_16BPP,
78
79 /* BTUART */
80 GPIO42_BTUART_RXD,
81 GPIO43_BTUART_TXD,
82 GPIO44_BTUART_CTS,
83 GPIO45_BTUART_RTS,
84
85 /* PC Card */
86 GPIO48_nPOE,
87 GPIO49_nPWE,
88 GPIO50_nPIOR,
89 GPIO51_nPIOW,
90 GPIO52_nPCE_1,
91 GPIO53_nPCE_2,
92 GPIO54_nPSKTSEL,
93 GPIO55_nPREG,
94 GPIO56_nPWAIT,
95 GPIO57_nIOIS16,
96
97 /* MMC */
98 GPIO6_MMC_CLK,
99 GPIO8_MMC_CS0,
100
101 /* wakeup */
102 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
103};
104
105#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
106#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
107
108void lubbock_set_hexled(uint32_t value)
109{
110 LUB_HEXLED = value;
111}
112
113void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
114{
115 unsigned long flags;
116
117 local_irq_save(flags);
118 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
119 local_irq_restore(flags);
120}
121EXPORT_SYMBOL(lubbock_set_misc_wr);
122
123static unsigned long lubbock_irq_enabled;
124
125static void lubbock_mask_irq(struct irq_data *d)
126{
127 int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
128 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
129}
130
131static void lubbock_unmask_irq(struct irq_data *d)
132{
133 int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
134 /* the irq can be acknowledged only if deasserted, so it's done here */
135 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
136 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
137}
138
139static struct irq_chip lubbock_irq_chip = {
140 .name = "FPGA",
141 .irq_ack = lubbock_mask_irq,
142 .irq_mask = lubbock_mask_irq,
143 .irq_unmask = lubbock_unmask_irq,
144};
145
146static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
147{
148 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
149 do {
150 /* clear our parent irq */
151 desc->irq_data.chip->irq_ack(&desc->irq_data);
152 if (likely(pending)) {
153 irq = LUBBOCK_IRQ(0) + __ffs(pending);
154 generic_handle_irq(irq);
155 }
156 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
157 } while (pending);
158}
159
160static void __init lubbock_init_irq(void)
161{
162 int irq;
163
164 pxa25x_init_irq();
165
166 /* setup extra lubbock irqs */
167 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
168 irq_set_chip_and_handler(irq, &lubbock_irq_chip,
169 handle_level_irq);
170 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
171 }
172
173 irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
174 irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
175}
176
177#ifdef CONFIG_PM
178
179static void lubbock_irq_resume(void)
180{
181 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
182}
183
184static struct syscore_ops lubbock_irq_syscore_ops = {
185 .resume = lubbock_irq_resume,
186};
187
188static int __init lubbock_irq_device_init(void)
189{
190 if (machine_is_lubbock()) {
191 register_syscore_ops(&lubbock_irq_syscore_ops);
192 return 0;
193 }
194 return -ENODEV;
195}
196
197device_initcall(lubbock_irq_device_init);
198
199#endif
200
201static int lubbock_udc_is_connected(void)
202{
203 return (LUB_MISC_RD & (1 << 9)) == 0;
204}
205
206static struct pxa2xx_udc_mach_info udc_info __initdata = {
207 .udc_is_connected = lubbock_udc_is_connected,
208 // no D+ pullup; lubbock can't connect/disconnect in software
209};
210
211static struct resource sa1111_resources[] = {
212 [0] = {
213 .start = 0x10000000,
214 .end = 0x10001fff,
215 .flags = IORESOURCE_MEM,
216 },
217 [1] = {
218 .start = LUBBOCK_SA1111_IRQ,
219 .end = LUBBOCK_SA1111_IRQ,
220 .flags = IORESOURCE_IRQ,
221 },
222};
223
224static struct sa1111_platform_data sa1111_info = {
225 .irq_base = LUBBOCK_SA1111_IRQ_BASE,
226 .disable_devs = SA1111_DEVID_SAC,
227};
228
229static struct platform_device sa1111_device = {
230 .name = "sa1111",
231 .id = -1,
232 .num_resources = ARRAY_SIZE(sa1111_resources),
233 .resource = sa1111_resources,
234 .dev = {
235 .platform_data = &sa1111_info,
236 },
237};
238
239/* ADS7846 is connected through SSP ... and if your board has J5 populated,
240 * you can select it to replace the ucb1400 by switching the touchscreen cable
241 * (to J5) and poking board registers (as done below). Else it's only useful
242 * for the temperature sensors.
243 */
244static struct pxa2xx_spi_master pxa_ssp_master_info = {
245 .num_chipselect = 1,
246};
247
248static int lubbock_ads7846_pendown_state(void)
249{
250 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
251 return 0;
252}
253
254static struct ads7846_platform_data ads_info = {
255 .model = 7846,
256 .vref_delay_usecs = 100, /* internal, no cap */
257 .get_pendown_state = lubbock_ads7846_pendown_state,
258 // .x_plate_ohms = 500, /* GUESS! */
259 // .y_plate_ohms = 500, /* GUESS! */
260};
261
262static void ads7846_cs(u32 command)
263{
264 static const unsigned TS_nCS = 1 << 11;
265 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
266}
267
268static struct pxa2xx_spi_chip ads_hw = {
269 .tx_threshold = 1,
270 .rx_threshold = 2,
271 .cs_control = ads7846_cs,
272};
273
274static struct spi_board_info spi_board_info[] __initdata = { {
275 .modalias = "ads7846",
276 .platform_data = &ads_info,
277 .controller_data = &ads_hw,
278 .irq = LUBBOCK_BB_IRQ,
279 .max_speed_hz = 120000 /* max sample rate at 3V */
280 * 26 /* command + data + overhead */,
281 .bus_num = 1,
282 .chip_select = 0,
283},
284};
285
286static struct resource smc91x_resources[] = {
287 [0] = {
288 .name = "smc91x-regs",
289 .start = 0x0c000c00,
290 .end = 0x0c0fffff,
291 .flags = IORESOURCE_MEM,
292 },
293 [1] = {
294 .start = LUBBOCK_ETH_IRQ,
295 .end = LUBBOCK_ETH_IRQ,
296 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
297 },
298 [2] = {
299 .name = "smc91x-attrib",
300 .start = 0x0e000000,
301 .end = 0x0e0fffff,
302 .flags = IORESOURCE_MEM,
303 },
304};
305
306static struct smc91x_platdata lubbock_smc91x_info = {
307 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
308};
309
310static struct platform_device smc91x_device = {
311 .name = "smc91x",
312 .id = -1,
313 .num_resources = ARRAY_SIZE(smc91x_resources),
314 .resource = smc91x_resources,
315 .dev = {
316 .platform_data = &lubbock_smc91x_info,
317 },
318};
319
320static struct resource flash_resources[] = {
321 [0] = {
322 .start = 0x00000000,
323 .end = SZ_64M - 1,
324 .flags = IORESOURCE_MEM,
325 },
326 [1] = {
327 .start = 0x04000000,
328 .end = 0x04000000 + SZ_64M - 1,
329 .flags = IORESOURCE_MEM,
330 },
331};
332
333static struct mtd_partition lubbock_partitions[] = {
334 {
335 .name = "Bootloader",
336 .size = 0x00040000,
337 .offset = 0,
338 .mask_flags = MTD_WRITEABLE /* force read-only */
339 },{
340 .name = "Kernel",
341 .size = 0x00100000,
342 .offset = 0x00040000,
343 },{
344 .name = "Filesystem",
345 .size = MTDPART_SIZ_FULL,
346 .offset = 0x00140000
347 }
348};
349
350static struct flash_platform_data lubbock_flash_data[2] = {
351 {
352 .map_name = "cfi_probe",
353 .parts = lubbock_partitions,
354 .nr_parts = ARRAY_SIZE(lubbock_partitions),
355 }, {
356 .map_name = "cfi_probe",
357 .parts = NULL,
358 .nr_parts = 0,
359 }
360};
361
362static struct platform_device lubbock_flash_device[2] = {
363 {
364 .name = "pxa2xx-flash",
365 .id = 0,
366 .dev = {
367 .platform_data = &lubbock_flash_data[0],
368 },
369 .resource = &flash_resources[0],
370 .num_resources = 1,
371 },
372 {
373 .name = "pxa2xx-flash",
374 .id = 1,
375 .dev = {
376 .platform_data = &lubbock_flash_data[1],
377 },
378 .resource = &flash_resources[1],
379 .num_resources = 1,
380 },
381};
382
383static struct platform_device *devices[] __initdata = {
384 &sa1111_device,
385 &smc91x_device,
386 &lubbock_flash_device[0],
387 &lubbock_flash_device[1],
388};
389
390static struct pxafb_mode_info sharp_lm8v31_mode = {
391 .pixclock = 270000,
392 .xres = 640,
393 .yres = 480,
394 .bpp = 16,
395 .hsync_len = 1,
396 .left_margin = 3,
397 .right_margin = 3,
398 .vsync_len = 1,
399 .upper_margin = 0,
400 .lower_margin = 0,
401 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
402 .cmap_greyscale = 0,
403};
404
405static struct pxafb_mach_info sharp_lm8v31 = {
406 .modes = &sharp_lm8v31_mode,
407 .num_modes = 1,
408 .cmap_inverse = 0,
409 .cmap_static = 0,
410 .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
411 LCD_AC_BIAS_FREQ(255),
412};
413
414#define MMC_POLL_RATE msecs_to_jiffies(1000)
415
416static void lubbock_mmc_poll(unsigned long);
417static irq_handler_t mmc_detect_int;
418
419static struct timer_list mmc_timer = {
420 .function = lubbock_mmc_poll,
421};
422
423static void lubbock_mmc_poll(unsigned long data)
424{
425 unsigned long flags;
426
427 /* clear any previous irq state, then ... */
428 local_irq_save(flags);
429 LUB_IRQ_SET_CLR &= ~(1 << 0);
430 local_irq_restore(flags);
431
432 /* poll until mmc/sd card is removed */
433 if (LUB_IRQ_SET_CLR & (1 << 0))
434 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
435 else {
436 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
437 enable_irq(LUBBOCK_SD_IRQ);
438 }
439}
440
441static irqreturn_t lubbock_detect_int(int irq, void *data)
442{
443 /* IRQ is level triggered; disable, and poll for removal */
444 disable_irq(irq);
445 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
446
447 return mmc_detect_int(irq, data);
448}
449
450static int lubbock_mci_init(struct device *dev,
451 irq_handler_t detect_int,
452 void *data)
453{
454 /* detect card insert/eject */
455 mmc_detect_int = detect_int;
456 init_timer(&mmc_timer);
457 mmc_timer.data = (unsigned long) data;
458 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
459 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
460}
461
462static int lubbock_mci_get_ro(struct device *dev)
463{
464 return (LUB_MISC_RD & (1 << 2)) != 0;
465}
466
467static void lubbock_mci_exit(struct device *dev, void *data)
468{
469 free_irq(LUBBOCK_SD_IRQ, data);
470 del_timer_sync(&mmc_timer);
471}
472
473static struct pxamci_platform_data lubbock_mci_platform_data = {
474 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
475 .detect_delay_ms = 10,
476 .init = lubbock_mci_init,
477 .get_ro = lubbock_mci_get_ro,
478 .exit = lubbock_mci_exit,
479 .gpio_card_detect = -1,
480 .gpio_card_ro = -1,
481 .gpio_power = -1,
482};
483
484static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
485{
486 unsigned long flags;
487
488 local_irq_save(flags);
489 if (mode & IR_SIRMODE) {
490 LUB_MISC_WR &= ~(1 << 4);
491 } else if (mode & IR_FIRMODE) {
492 LUB_MISC_WR |= 1 << 4;
493 }
494 pxa2xx_transceiver_mode(dev, mode);
495 local_irq_restore(flags);
496}
497
498static struct pxaficp_platform_data lubbock_ficp_platform_data = {
499 .gpio_pwdown = -1,
500 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
501 .transceiver_mode = lubbock_irda_transceiver_mode,
502};
503
504static void __init lubbock_init(void)
505{
506 int flashboot = (LUB_CONF_SWITCHES & 1);
507
508 pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
509
510 pxa_set_ffuart_info(NULL);
511 pxa_set_btuart_info(NULL);
512 pxa_set_stuart_info(NULL);
513
514 clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
515 pxa_set_udc_info(&udc_info);
516 pxa_set_fb_info(NULL, &sharp_lm8v31);
517 pxa_set_mci_info(&lubbock_mci_platform_data);
518 pxa_set_ficp_info(&lubbock_ficp_platform_data);
519 pxa_set_ac97_info(NULL);
520
521 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
522 (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
523 /* Compensate for the nROMBT switch which swaps the flash banks */
524 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
525 flashboot?"Flash":"ROM", flashboot);
526
527 lubbock_flash_data[flashboot^1].name = "application-flash";
528 lubbock_flash_data[flashboot].name = "boot-rom";
529 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
530
531 pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
532 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
533}
534
535static struct map_desc lubbock_io_desc[] __initdata = {
536 { /* CPLD */
537 .virtual = LUBBOCK_FPGA_VIRT,
538 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
539 .length = 0x00100000,
540 .type = MT_DEVICE
541 }
542};
543
544static void __init lubbock_map_io(void)
545{
546 pxa25x_map_io();
547 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
548
549 PCFR |= PCFR_OPDE;
550}
551
552MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
553 /* Maintainer: MontaVista Software Inc. */
554 .map_io = lubbock_map_io,
555 .nr_irqs = LUBBOCK_NR_IRQS,
556 .init_irq = lubbock_init_irq,
557 .handle_irq = pxa25x_handle_irq,
558 .timer = &pxa_timer,
559 .init_machine = lubbock_init,
560 .restart = pxa_restart,
561MACHINE_END