Loading...
1/*
2 * QNAP TS-x09 Boards common functions
3 *
4 * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
5 * Byron Bradley <byron.bbradley@gmail.com>
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 */
12
13#include <linux/kernel.h>
14#include <linux/pci.h>
15#include <linux/mv643xx_eth.h>
16#include <linux/timex.h>
17#include <linux/serial_reg.h>
18#include "orion5x.h"
19#include "tsx09-common.h"
20#include "common.h"
21
22/*****************************************************************************
23 * QNAP TS-x09 specific power off method via UART1-attached PIC
24 ****************************************************************************/
25
26#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
27
28void qnap_tsx09_power_off(void)
29{
30 /* 19200 baud divisor */
31 const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200));
32
33 pr_info("%s: triggering power-off...\n", __func__);
34
35 /* hijack uart1 and reset into sane state (19200,8n1) */
36 writel(0x83, UART1_REG(LCR));
37 writel(divisor & 0xff, UART1_REG(DLL));
38 writel((divisor >> 8) & 0xff, UART1_REG(DLM));
39 writel(0x03, UART1_REG(LCR));
40 writel(0x00, UART1_REG(IER));
41 writel(0x00, UART1_REG(FCR));
42 writel(0x00, UART1_REG(MCR));
43
44 /* send the power-off command 'A' to PIC */
45 writel('A', UART1_REG(TX));
46}
47
48/*****************************************************************************
49 * Ethernet
50 ****************************************************************************/
51
52struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
53 .phy_addr = MV643XX_ETH_PHY_ADDR(8),
54};
55
56static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
57{
58 u_int8_t addr[6];
59
60 if (!mac_pton(addr_str, addr))
61 return -1;
62
63 printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
64
65 memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
66
67 return 0;
68}
69
70/*
71 * The 'NAS Config' flash partition has an ext2 filesystem which
72 * contains a file that has the ethernet MAC address in plain text
73 * (format "xx:xx:xx:xx:xx:xx\n").
74 */
75void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
76{
77 unsigned long addr;
78
79 for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
80 void __iomem *nor_page;
81 int ret = 0;
82
83 nor_page = ioremap(addr, 1024);
84 if (nor_page != NULL) {
85 ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page);
86 iounmap(nor_page);
87 }
88
89 if (ret == 0)
90 break;
91 }
92}
1/*
2 * QNAP TS-x09 Boards common functions
3 *
4 * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
5 * Byron Bradley <byron.bbradley@gmail.com>
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 */
12
13#include <linux/kernel.h>
14#include <linux/pci.h>
15#include <linux/mv643xx_eth.h>
16#include <linux/timex.h>
17#include <linux/serial_reg.h>
18#include <mach/orion5x.h>
19#include "tsx09-common.h"
20#include "common.h"
21
22/*****************************************************************************
23 * QNAP TS-x09 specific power off method via UART1-attached PIC
24 ****************************************************************************/
25
26#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
27
28void qnap_tsx09_power_off(void)
29{
30 /* 19200 baud divisor */
31 const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200));
32
33 pr_info("%s: triggering power-off...\n", __func__);
34
35 /* hijack uart1 and reset into sane state (19200,8n1) */
36 writel(0x83, UART1_REG(LCR));
37 writel(divisor & 0xff, UART1_REG(DLL));
38 writel((divisor >> 8) & 0xff, UART1_REG(DLM));
39 writel(0x03, UART1_REG(LCR));
40 writel(0x00, UART1_REG(IER));
41 writel(0x00, UART1_REG(FCR));
42 writel(0x00, UART1_REG(MCR));
43
44 /* send the power-off command 'A' to PIC */
45 writel('A', UART1_REG(TX));
46}
47
48/*****************************************************************************
49 * Ethernet
50 ****************************************************************************/
51
52struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
53 .phy_addr = MV643XX_ETH_PHY_ADDR(8),
54};
55
56static int __init qnap_tsx09_parse_hex_nibble(char n)
57{
58 if (n >= '0' && n <= '9')
59 return n - '0';
60
61 if (n >= 'A' && n <= 'F')
62 return n - 'A' + 10;
63
64 if (n >= 'a' && n <= 'f')
65 return n - 'a' + 10;
66
67 return -1;
68}
69
70static int __init qnap_tsx09_parse_hex_byte(const char *b)
71{
72 int hi;
73 int lo;
74
75 hi = qnap_tsx09_parse_hex_nibble(b[0]);
76 lo = qnap_tsx09_parse_hex_nibble(b[1]);
77
78 if (hi < 0 || lo < 0)
79 return -1;
80
81 return (hi << 4) | lo;
82}
83
84static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
85{
86 u_int8_t addr[6];
87 int i;
88
89 for (i = 0; i < 6; i++) {
90 int byte;
91
92 /*
93 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
94 */
95 if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
96 return -1;
97
98 byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
99 if (byte < 0)
100 return -1;
101 addr[i] = byte;
102 }
103
104 printk(KERN_INFO "tsx09: found ethernet mac address ");
105 for (i = 0; i < 6; i++)
106 printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
107
108 memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
109
110 return 0;
111}
112
113/*
114 * The 'NAS Config' flash partition has an ext2 filesystem which
115 * contains a file that has the ethernet MAC address in plain text
116 * (format "xx:xx:xx:xx:xx:xx\n").
117 */
118void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
119{
120 unsigned long addr;
121
122 for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
123 char *nor_page;
124 int ret = 0;
125
126 nor_page = ioremap(addr, 1024);
127 if (nor_page != NULL) {
128 ret = qnap_tsx09_check_mac_addr(nor_page);
129 iounmap(nor_page);
130 }
131
132 if (ret == 0)
133 break;
134 }
135}