Linux Audio

Check our new training course

Loading...
v4.6
  1/*
  2 * w1_netlink.h
  3 *
  4 * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net>
  5 *
  6 *
  7 * This program is free software; you can redistribute it and/or modify
  8 * it under the terms of the GNU General Public License as published by
  9 * the Free Software Foundation; either version 2 of the License, or
 10 * (at your option) any later version.
 11 *
 12 * This program is distributed in the hope that it will be useful,
 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 15 * GNU General Public License for more details.
 16 *
 17 * You should have received a copy of the GNU General Public License
 18 * along with this program; if not, write to the Free Software
 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 20 */
 21
 22#ifndef __W1_NETLINK_H
 23#define __W1_NETLINK_H
 24
 25#include <asm/types.h>
 26#include <linux/connector.h>
 27
 28#include "w1.h"
 29
 30/**
 31 * enum w1_cn_msg_flags - bitfield flags for struct cn_msg.flags
 32 *
 33 * @W1_CN_BUNDLE: Request bundling replies into fewer messagse.  Be prepared
 34 * to handle multiple struct cn_msg, struct w1_netlink_msg, and
 35 * struct w1_netlink_cmd in one packet.
 36 */
 37enum w1_cn_msg_flags {
 38	W1_CN_BUNDLE = 1,
 39};
 40
 41/**
 42 * enum w1_netlink_message_types - message type
 43 *
 44 * @W1_SLAVE_ADD: notification that a slave device was added
 45 * @W1_SLAVE_REMOVE: notification that a slave device was removed
 46 * @W1_MASTER_ADD: notification that a new bus master was added
 47 * @W1_MASTER_REMOVE: notification that a bus masterwas removed
 48 * @W1_MASTER_CMD: initiate operations on a specific master
 49 * @W1_SLAVE_CMD: sends reset, selects the slave, then does a read/write/touch
 50 * operation
 51 * @W1_LIST_MASTERS: used to determine the bus master identifiers
 52 */
 53enum w1_netlink_message_types {
 54	W1_SLAVE_ADD = 0,
 55	W1_SLAVE_REMOVE,
 56	W1_MASTER_ADD,
 57	W1_MASTER_REMOVE,
 58	W1_MASTER_CMD,
 59	W1_SLAVE_CMD,
 60	W1_LIST_MASTERS,
 61};
 62
 63/**
 64 * struct w1_netlink_msg - holds w1 message type, id, and result
 65 *
 66 * @type: one of enum w1_netlink_message_types
 67 * @status: kernel feedback for success 0 or errno failure value
 68 * @len: length of data following w1_netlink_msg
 69 * @id: union holding master bus id (msg.id) and slave device id (id[8]).
 70 * @data: start address of any following data
 71 *
 72 * The base message structure for w1 messages over netlink.
 73 * The netlink connector data sequence is, struct nlmsghdr, struct cn_msg,
 74 * then one or more struct w1_netlink_msg (each with optional data).
 75 */
 76struct w1_netlink_msg
 77{
 78	__u8				type;
 79	__u8				status;
 80	__u16				len;
 81	union {
 82		__u8			id[8];
 83		struct w1_mst {
 84			__u32		id;
 85			__u32		res;
 86		} mst;
 87	} id;
 88	__u8				data[0];
 89};
 90
 91/**
 92 * enum w1_commands - commands available for master or slave operations
 93 *
 94 * @W1_CMD_READ: read len bytes
 95 * @W1_CMD_WRITE: write len bytes
 96 * @W1_CMD_SEARCH: initiate a standard search, returns only the slave
 97 * devices found during that search
 98 * @W1_CMD_ALARM_SEARCH: search for devices that are currently alarming
 99 * @W1_CMD_TOUCH: Touches a series of bytes.
100 * @W1_CMD_RESET: sends a bus reset on the given master
101 * @W1_CMD_SLAVE_ADD: adds a slave to the given master,
102 * 8 byte slave id at data[0]
103 * @W1_CMD_SLAVE_REMOVE: removes a slave to the given master,
104 * 8 byte slave id at data[0]
105 * @W1_CMD_LIST_SLAVES: list of slaves registered on this master
106 * @W1_CMD_MAX: number of available commands
107 */
108enum w1_commands {
109	W1_CMD_READ = 0,
110	W1_CMD_WRITE,
111	W1_CMD_SEARCH,
112	W1_CMD_ALARM_SEARCH,
113	W1_CMD_TOUCH,
114	W1_CMD_RESET,
115	W1_CMD_SLAVE_ADD,
116	W1_CMD_SLAVE_REMOVE,
117	W1_CMD_LIST_SLAVES,
118	W1_CMD_MAX
119};
120
121/**
122 * struct w1_netlink_cmd - holds the command and data
123 *
124 * @cmd: one of enum w1_commands
125 * @res: reserved
126 * @len: length of data following w1_netlink_cmd
127 * @data: start address of any following data
128 *
129 * One or more struct w1_netlink_cmd is placed starting at w1_netlink_msg.data
130 * each with optional data.
131 */
132struct w1_netlink_cmd
133{
134	__u8				cmd;
135	__u8				res;
136	__u16				len;
137	__u8				data[0];
138};
139
140#ifdef __KERNEL__
141
142void w1_netlink_send(struct w1_master *, struct w1_netlink_msg *);
143int w1_init_netlink(void);
144void w1_fini_netlink(void);
145
146#endif /* __KERNEL__ */
147#endif /* __W1_NETLINK_H */
v3.1
 1/*
 2 * w1_netlink.h
 3 *
 4 * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net>
 5 *
 6 *
 7 * This program is free software; you can redistribute it and/or modify
 8 * it under the terms of the GNU General Public License as published by
 9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#ifndef __W1_NETLINK_H
23#define __W1_NETLINK_H
24
25#include <asm/types.h>
26#include <linux/connector.h>
27
28#include "w1.h"
29
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
30enum w1_netlink_message_types {
31	W1_SLAVE_ADD = 0,
32	W1_SLAVE_REMOVE,
33	W1_MASTER_ADD,
34	W1_MASTER_REMOVE,
35	W1_MASTER_CMD,
36	W1_SLAVE_CMD,
37	W1_LIST_MASTERS,
38};
39
 
 
 
 
 
 
 
 
 
 
 
 
 
40struct w1_netlink_msg
41{
42	__u8				type;
43	__u8				status;
44	__u16				len;
45	union {
46		__u8			id[8];
47		struct w1_mst {
48			__u32		id;
49			__u32		res;
50		} mst;
51	} id;
52	__u8				data[0];
53};
54
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
55enum w1_commands {
56	W1_CMD_READ = 0,
57	W1_CMD_WRITE,
58	W1_CMD_SEARCH,
59	W1_CMD_ALARM_SEARCH,
60	W1_CMD_TOUCH,
61	W1_CMD_RESET,
62	W1_CMD_MAX,
 
 
 
63};
64
 
 
 
 
 
 
 
 
 
 
 
65struct w1_netlink_cmd
66{
67	__u8				cmd;
68	__u8				res;
69	__u16				len;
70	__u8				data[0];
71};
72
73#ifdef __KERNEL__
74
75void w1_netlink_send(struct w1_master *, struct w1_netlink_msg *);
76int w1_init_netlink(void);
77void w1_fini_netlink(void);
78
79#endif /* __KERNEL__ */
80#endif /* __W1_NETLINK_H */