1#
  2# USB Dual Role (OTG-ready) Controller Drivers
  3# for silicon based on Mentor Graphics INVENTRA designs
  4#
  5
  6# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
  7config USB_MUSB_HDRC
  8	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)'
  9	depends on (USB || USB_GADGET)
 10	depends on HAS_IOMEM
 
 
 
 
 11	help
 12	  Say Y here if your system has a dual role high speed USB
 13	  controller based on the Mentor Graphics silicon IP.  Then
 14	  configure options to match your silicon and the board
 15	  it's being used with, including the USB peripheral role,
 16	  or the USB host role, or both.
 17
 18	  Texas Instruments families using this IP include DaVinci
 19	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 20
 21	  Analog Devices parts using this IP include Blackfin BF54x,
 22	  BF525 and BF527.
 23
 24	  Allwinner SoCs using this IP include A10, A13, A20, ...
 25
 26	  If you do not know what this is, please say N.
 27
 28	  To compile this driver as a module, choose M here; the
 29	  module will be called "musb-hdrc".
 30
 31if USB_MUSB_HDRC
 32
 33choice
 34	bool "MUSB Mode Selection"
 35	default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
 36	default USB_MUSB_HOST if (USB && !USB_GADGET)
 37	default USB_MUSB_GADGET if (!USB && USB_GADGET)
 38
 39config USB_MUSB_HOST
 40	bool "Host only mode"
 41	depends on USB=y || USB=USB_MUSB_HDRC
 42	help
 43	  Select this when you want to use MUSB in host mode only,
 44	  thereby the gadget feature will be regressed.
 45
 46config USB_MUSB_GADGET
 47	bool "Gadget only mode"
 48	depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
 49	depends on HAS_DMA
 50	help
 51	  Select this when you want to use MUSB in gadget mode only,
 52	  thereby the host feature will be regressed.
 53
 54config USB_MUSB_DUAL_ROLE
 55	bool "Dual Role mode"
 56	depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
 57	depends on HAS_DMA
 58	help
 59	  This is the default mode of working of MUSB controller where
 60	  both host and gadget features are enabled.
 61
 62endchoice
 63
 64comment "Platform Glue Layer"
 65
 66config USB_MUSB_SUNXI
 67	tristate "Allwinner (sunxi)"
 68	depends on ARCH_SUNXI
 69	depends on NOP_USB_XCEIV
 70	depends on PHY_SUN4I_USB
 71	depends on EXTCON
 72	depends on GENERIC_PHY
 73	select SUNXI_SRAM
 74
 75config USB_MUSB_DAVINCI
 76	tristate "DaVinci"
 77	depends on ARCH_DAVINCI_DMx
 78	depends on NOP_USB_XCEIV
 79	depends on BROKEN
 80
 81config USB_MUSB_DA8XX
 82	tristate "DA8xx/OMAP-L1x"
 83	depends on ARCH_DAVINCI_DA8XX
 84	depends on NOP_USB_XCEIV
 85	depends on BROKEN
 86
 87config USB_MUSB_TUSB6010
 88	tristate "TUSB6010"
 89	depends on HAS_IOMEM
 90	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 91	depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
 92
 93config USB_MUSB_OMAP2PLUS
 94	tristate "OMAP2430 and onwards"
 95	depends on ARCH_OMAP2PLUS && USB
 96	depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
 97	select GENERIC_PHY
 98
 99config USB_MUSB_AM35X
100	tristate "AM35x"
101	depends on ARCH_OMAP
102	depends on NOP_USB_XCEIV
103
104config USB_MUSB_DSPS
105	tristate "TI DSPS platforms"
106	select USB_MUSB_AM335X_CHILD
107	depends on ARCH_OMAP2PLUS || COMPILE_TEST
108	depends on OF_IRQ
109
110config USB_MUSB_BLACKFIN
111	tristate "Blackfin"
112	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
113	depends on NOP_USB_XCEIV
114
115config USB_MUSB_UX500
116	tristate "Ux500 platforms"
117	depends on ARCH_U8500 || COMPILE_TEST
118
119config USB_MUSB_JZ4740
120	tristate "JZ4740"
121	depends on NOP_USB_XCEIV
122	depends on MACH_JZ4740 || COMPILE_TEST
123	depends on USB_MUSB_GADGET
124	depends on USB_OTG_BLACKLIST_HUB
125
126config USB_MUSB_AM335X_CHILD
127	tristate
128
129comment "MUSB DMA mode"
130
131config MUSB_PIO_ONLY
132	bool 'Disable DMA (always use PIO)'
 
 
133	help
134	  All data is copied between memory and FIFO by the CPU.
135	  DMA controllers are ignored.
136
137	  Do not choose this unless DMA support for your SOC or board
138	  is unavailable (or unstable).  When DMA is enabled at compile time,
139	  you can still disable it at run time using the "use_dma=n" module
140	  parameter.
141
142if !MUSB_PIO_ONLY
143
144config USB_UX500_DMA
145	bool 'ST Ericsson Ux500'
146	depends on USB_MUSB_UX500
 
147	help
148	  Enable DMA transfers on UX500 platforms.
149
150config USB_INVENTRA_DMA
151	bool 'Inventra'
152	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 
153	help
154	  Enable DMA transfers using Mentor's engine.
155
156config USB_TI_CPPI_DMA
157	bool 'TI CPPI (Davinci)'
158	depends on USB_MUSB_DAVINCI
 
159	help
160	  Enable DMA transfers when TI CPPI DMA is available.
161
162config USB_TI_CPPI41_DMA
163	bool 'TI CPPI 4.1 (AM335x)'
164	depends on ARCH_OMAP && DMADEVICES
165	select TI_CPPI41
166
167config USB_TUSB_OMAP_DMA
168	bool 'TUSB 6010'
169	depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
 
170	depends on ARCH_OMAP
 
171	help
172	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
173
174endif # !MUSB_PIO_ONLY
175
176endif # USB_MUSB_HDRC

  1#
  2# USB Dual Role (OTG-ready) Controller Drivers
  3# for silicon based on Mentor Graphics INVENTRA designs
  4#
  5
  6# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
  7config USB_MUSB_HDRC
  8	depends on USB && USB_GADGET
  9	depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 10	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
 11	select TWL4030_USB if MACH_OMAP_3430SDP
 12	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 13	select USB_OTG_UTILS
 14	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 15	help
 16	  Say Y here if your system has a dual role high speed USB
 17	  controller based on the Mentor Graphics silicon IP.  Then
 18	  configure options to match your silicon and the board
 19	  it's being used with, including the USB peripheral role,
 20	  or the USB host role, or both.
 21
 22	  Texas Instruments familiies using this IP include DaVinci
 23	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 24
 25	  Analog Devices parts using this IP include Blackfin BF54x,
 26	  BF525 and BF527.
 27
 
 
 28	  If you do not know what this is, please say N.
 29
 30	  To compile this driver as a module, choose M here; the
 31	  module will be called "musb-hdrc".
 32
 
 
 33choice
 34	prompt "Platform Glue Layer"
 35	depends on USB_MUSB_HDRC
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 36
 37config USB_MUSB_DAVINCI
 38	tristate "DaVinci"
 39	depends on ARCH_DAVINCI_DMx
 
 
 40
 41config USB_MUSB_DA8XX
 42	tristate "DA8xx/OMAP-L1x"
 43	depends on ARCH_DAVINCI_DA8XX
 
 
 44
 45config USB_MUSB_TUSB6010
 46	tristate "TUSB6010"
 47	depends on ARCH_OMAP
 
 
 48
 49config USB_MUSB_OMAP2PLUS
 50	tristate "OMAP2430 and onwards"
 51	depends on ARCH_OMAP2PLUS
 
 
 52
 53config USB_MUSB_AM35X
 54	tristate "AM35x"
 55	depends on ARCH_OMAP
 
 
 
 
 
 
 
 56
 57config USB_MUSB_BLACKFIN
 58	tristate "Blackfin"
 59	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
 
 60
 61config USB_MUSB_UX500
 62	tristate "U8500 and U5500"
 63	depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500)
 
 
 
 
 
 
 
 64
 65endchoice
 
 
 
 66
 67config MUSB_PIO_ONLY
 68	bool 'Disable DMA (always use PIO)'
 69	depends on USB_MUSB_HDRC
 70	default USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X
 71	help
 72	  All data is copied between memory and FIFO by the CPU.
 73	  DMA controllers are ignored.
 74
 75	  Do not select 'n' here unless DMA support for your SOC or board
 76	  is unavailable (or unstable).  When DMA is enabled at compile time,
 77	  you can still disable it at run time using the "use_dma=n" module
 78	  parameter.
 79
 
 
 80config USB_UX500_DMA
 81	bool
 82	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
 83	default USB_MUSB_UX500
 84	help
 85	  Enable DMA transfers on UX500 platforms.
 86
 87config USB_INVENTRA_DMA
 88	bool
 89	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
 90	default USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 91	help
 92	  Enable DMA transfers using Mentor's engine.
 93
 94config USB_TI_CPPI_DMA
 95	bool
 96	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
 97	default USB_MUSB_DAVINCI
 98	help
 99	  Enable DMA transfers when TI CPPI DMA is available.
100
 
 
 
 
 
101config USB_TUSB_OMAP_DMA
102	bool
103	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
104	depends on USB_MUSB_TUSB6010
105	depends on ARCH_OMAP
106	default y
107	help
108	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
109