Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
   1/* Intel(R) Gigabit Ethernet Linux driver
   2 * Copyright(c) 2007-2014 Intel Corporation.
   3 *
   4 * This program is free software; you can redistribute it and/or modify it
   5 * under the terms and conditions of the GNU General Public License,
   6 * version 2, as published by the Free Software Foundation.
   7 *
   8 * This program is distributed in the hope it will be useful, but WITHOUT
   9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11 * more details.
  12 *
  13 * You should have received a copy of the GNU General Public License along with
  14 * this program; if not, see <http://www.gnu.org/licenses/>.
  15 *
  16 * The full GNU General Public License is included in this distribution in
  17 * the file called "COPYING".
  18 *
  19 * Contact Information:
  20 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  21 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  22 */
  23
  24#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  25
  26#include <linux/module.h>
  27#include <linux/types.h>
  28#include <linux/init.h>
  29#include <linux/bitops.h>
  30#include <linux/vmalloc.h>
  31#include <linux/pagemap.h>
  32#include <linux/netdevice.h>
  33#include <linux/ipv6.h>
  34#include <linux/slab.h>
  35#include <net/checksum.h>
  36#include <net/ip6_checksum.h>
  37#include <linux/net_tstamp.h>
  38#include <linux/mii.h>
  39#include <linux/ethtool.h>
  40#include <linux/if.h>
  41#include <linux/if_vlan.h>
  42#include <linux/pci.h>
  43#include <linux/pci-aspm.h>
  44#include <linux/delay.h>
  45#include <linux/interrupt.h>
  46#include <linux/ip.h>
  47#include <linux/tcp.h>
  48#include <linux/sctp.h>
  49#include <linux/if_ether.h>
  50#include <linux/aer.h>
  51#include <linux/prefetch.h>
  52#include <linux/pm_runtime.h>
  53#ifdef CONFIG_IGB_DCA
  54#include <linux/dca.h>
  55#endif
  56#include <linux/i2c.h>
  57#include "igb.h"
  58
  59#define MAJ 5
  60#define MIN 3
  61#define BUILD 0
  62#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
  63__stringify(BUILD) "-k"
  64char igb_driver_name[] = "igb";
  65char igb_driver_version[] = DRV_VERSION;
  66static const char igb_driver_string[] =
  67				"Intel(R) Gigabit Ethernet Network Driver";
  68static const char igb_copyright[] =
  69				"Copyright (c) 2007-2014 Intel Corporation.";
  70
  71static const struct e1000_info *igb_info_tbl[] = {
  72	[board_82575] = &e1000_82575_info,
  73};
  74
  75static const struct pci_device_id igb_pci_tbl[] = {
  76	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) },
  77	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) },
  78	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) },
  79	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER), board_82575 },
  80	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER), board_82575 },
  81	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER), board_82575 },
  82	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES), board_82575 },
  83	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII), board_82575 },
  84	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER_FLASHLESS), board_82575 },
  85	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES_FLASHLESS), board_82575 },
  86	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
  87	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
  88	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
  89	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
  90	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
  91	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
  92	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER), board_82575 },
  93	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
  94	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
  95	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
  96	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
  97	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
  98	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
  99	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
 100	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
 101	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
 102	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
 103	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
 104	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
 105	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
 106	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
 107	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
 108	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
 109	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
 110	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
 111	/* required last entry */
 112	{0, }
 113};
 114
 115MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
 116
 117static int igb_setup_all_tx_resources(struct igb_adapter *);
 118static int igb_setup_all_rx_resources(struct igb_adapter *);
 119static void igb_free_all_tx_resources(struct igb_adapter *);
 120static void igb_free_all_rx_resources(struct igb_adapter *);
 121static void igb_setup_mrqc(struct igb_adapter *);
 122static int igb_probe(struct pci_dev *, const struct pci_device_id *);
 123static void igb_remove(struct pci_dev *pdev);
 124static int igb_sw_init(struct igb_adapter *);
 125int igb_open(struct net_device *);
 126int igb_close(struct net_device *);
 127static void igb_configure(struct igb_adapter *);
 128static void igb_configure_tx(struct igb_adapter *);
 129static void igb_configure_rx(struct igb_adapter *);
 130static void igb_clean_all_tx_rings(struct igb_adapter *);
 131static void igb_clean_all_rx_rings(struct igb_adapter *);
 132static void igb_clean_tx_ring(struct igb_ring *);
 133static void igb_clean_rx_ring(struct igb_ring *);
 134static void igb_set_rx_mode(struct net_device *);
 135static void igb_update_phy_info(unsigned long);
 136static void igb_watchdog(unsigned long);
 137static void igb_watchdog_task(struct work_struct *);
 138static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *);
 139static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *dev,
 140					  struct rtnl_link_stats64 *stats);
 141static int igb_change_mtu(struct net_device *, int);
 142static int igb_set_mac(struct net_device *, void *);
 143static void igb_set_uta(struct igb_adapter *adapter, bool set);
 144static irqreturn_t igb_intr(int irq, void *);
 145static irqreturn_t igb_intr_msi(int irq, void *);
 146static irqreturn_t igb_msix_other(int irq, void *);
 147static irqreturn_t igb_msix_ring(int irq, void *);
 148#ifdef CONFIG_IGB_DCA
 149static void igb_update_dca(struct igb_q_vector *);
 150static void igb_setup_dca(struct igb_adapter *);
 151#endif /* CONFIG_IGB_DCA */
 152static int igb_poll(struct napi_struct *, int);
 153static bool igb_clean_tx_irq(struct igb_q_vector *);
 154static int igb_clean_rx_irq(struct igb_q_vector *, int);
 155static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
 156static void igb_tx_timeout(struct net_device *);
 157static void igb_reset_task(struct work_struct *);
 158static void igb_vlan_mode(struct net_device *netdev,
 159			  netdev_features_t features);
 160static int igb_vlan_rx_add_vid(struct net_device *, __be16, u16);
 161static int igb_vlan_rx_kill_vid(struct net_device *, __be16, u16);
 162static void igb_restore_vlan(struct igb_adapter *);
 163static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
 164static void igb_ping_all_vfs(struct igb_adapter *);
 165static void igb_msg_task(struct igb_adapter *);
 166static void igb_vmm_control(struct igb_adapter *);
 167static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
 168static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
 169static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
 170static int igb_ndo_set_vf_vlan(struct net_device *netdev,
 171			       int vf, u16 vlan, u8 qos);
 172static int igb_ndo_set_vf_bw(struct net_device *, int, int, int);
 173static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
 174				   bool setting);
 175static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
 176				 struct ifla_vf_info *ivi);
 177static void igb_check_vf_rate_limit(struct igb_adapter *);
 178
 179#ifdef CONFIG_PCI_IOV
 180static int igb_vf_configure(struct igb_adapter *adapter, int vf);
 181static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs);
 182static int igb_disable_sriov(struct pci_dev *dev);
 183static int igb_pci_disable_sriov(struct pci_dev *dev);
 184#endif
 185
 186#ifdef CONFIG_PM
 187#ifdef CONFIG_PM_SLEEP
 188static int igb_suspend(struct device *);
 189#endif
 190static int igb_resume(struct device *);
 191static int igb_runtime_suspend(struct device *dev);
 192static int igb_runtime_resume(struct device *dev);
 193static int igb_runtime_idle(struct device *dev);
 194static const struct dev_pm_ops igb_pm_ops = {
 195	SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume)
 196	SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume,
 197			igb_runtime_idle)
 198};
 199#endif
 200static void igb_shutdown(struct pci_dev *);
 201static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
 202#ifdef CONFIG_IGB_DCA
 203static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
 204static struct notifier_block dca_notifier = {
 205	.notifier_call	= igb_notify_dca,
 206	.next		= NULL,
 207	.priority	= 0
 208};
 209#endif
 210#ifdef CONFIG_NET_POLL_CONTROLLER
 211/* for netdump / net console */
 212static void igb_netpoll(struct net_device *);
 213#endif
 214#ifdef CONFIG_PCI_IOV
 215static unsigned int max_vfs;
 216module_param(max_vfs, uint, 0);
 217MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate per physical function");
 218#endif /* CONFIG_PCI_IOV */
 219
 220static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
 221		     pci_channel_state_t);
 222static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
 223static void igb_io_resume(struct pci_dev *);
 224
 225static const struct pci_error_handlers igb_err_handler = {
 226	.error_detected = igb_io_error_detected,
 227	.slot_reset = igb_io_slot_reset,
 228	.resume = igb_io_resume,
 229};
 230
 231static void igb_init_dmac(struct igb_adapter *adapter, u32 pba);
 232
 233static struct pci_driver igb_driver = {
 234	.name     = igb_driver_name,
 235	.id_table = igb_pci_tbl,
 236	.probe    = igb_probe,
 237	.remove   = igb_remove,
 238#ifdef CONFIG_PM
 239	.driver.pm = &igb_pm_ops,
 240#endif
 241	.shutdown = igb_shutdown,
 242	.sriov_configure = igb_pci_sriov_configure,
 243	.err_handler = &igb_err_handler
 244};
 245
 246MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
 247MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
 248MODULE_LICENSE("GPL");
 249MODULE_VERSION(DRV_VERSION);
 250
 251#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
 252static int debug = -1;
 253module_param(debug, int, 0);
 254MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 255
 256struct igb_reg_info {
 257	u32 ofs;
 258	char *name;
 259};
 260
 261static const struct igb_reg_info igb_reg_info_tbl[] = {
 262
 263	/* General Registers */
 264	{E1000_CTRL, "CTRL"},
 265	{E1000_STATUS, "STATUS"},
 266	{E1000_CTRL_EXT, "CTRL_EXT"},
 267
 268	/* Interrupt Registers */
 269	{E1000_ICR, "ICR"},
 270
 271	/* RX Registers */
 272	{E1000_RCTL, "RCTL"},
 273	{E1000_RDLEN(0), "RDLEN"},
 274	{E1000_RDH(0), "RDH"},
 275	{E1000_RDT(0), "RDT"},
 276	{E1000_RXDCTL(0), "RXDCTL"},
 277	{E1000_RDBAL(0), "RDBAL"},
 278	{E1000_RDBAH(0), "RDBAH"},
 279
 280	/* TX Registers */
 281	{E1000_TCTL, "TCTL"},
 282	{E1000_TDBAL(0), "TDBAL"},
 283	{E1000_TDBAH(0), "TDBAH"},
 284	{E1000_TDLEN(0), "TDLEN"},
 285	{E1000_TDH(0), "TDH"},
 286	{E1000_TDT(0), "TDT"},
 287	{E1000_TXDCTL(0), "TXDCTL"},
 288	{E1000_TDFH, "TDFH"},
 289	{E1000_TDFT, "TDFT"},
 290	{E1000_TDFHS, "TDFHS"},
 291	{E1000_TDFPC, "TDFPC"},
 292
 293	/* List Terminator */
 294	{}
 295};
 296
 297/* igb_regdump - register printout routine */
 298static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
 299{
 300	int n = 0;
 301	char rname[16];
 302	u32 regs[8];
 303
 304	switch (reginfo->ofs) {
 305	case E1000_RDLEN(0):
 306		for (n = 0; n < 4; n++)
 307			regs[n] = rd32(E1000_RDLEN(n));
 308		break;
 309	case E1000_RDH(0):
 310		for (n = 0; n < 4; n++)
 311			regs[n] = rd32(E1000_RDH(n));
 312		break;
 313	case E1000_RDT(0):
 314		for (n = 0; n < 4; n++)
 315			regs[n] = rd32(E1000_RDT(n));
 316		break;
 317	case E1000_RXDCTL(0):
 318		for (n = 0; n < 4; n++)
 319			regs[n] = rd32(E1000_RXDCTL(n));
 320		break;
 321	case E1000_RDBAL(0):
 322		for (n = 0; n < 4; n++)
 323			regs[n] = rd32(E1000_RDBAL(n));
 324		break;
 325	case E1000_RDBAH(0):
 326		for (n = 0; n < 4; n++)
 327			regs[n] = rd32(E1000_RDBAH(n));
 328		break;
 329	case E1000_TDBAL(0):
 330		for (n = 0; n < 4; n++)
 331			regs[n] = rd32(E1000_RDBAL(n));
 332		break;
 333	case E1000_TDBAH(0):
 334		for (n = 0; n < 4; n++)
 335			regs[n] = rd32(E1000_TDBAH(n));
 336		break;
 337	case E1000_TDLEN(0):
 338		for (n = 0; n < 4; n++)
 339			regs[n] = rd32(E1000_TDLEN(n));
 340		break;
 341	case E1000_TDH(0):
 342		for (n = 0; n < 4; n++)
 343			regs[n] = rd32(E1000_TDH(n));
 344		break;
 345	case E1000_TDT(0):
 346		for (n = 0; n < 4; n++)
 347			regs[n] = rd32(E1000_TDT(n));
 348		break;
 349	case E1000_TXDCTL(0):
 350		for (n = 0; n < 4; n++)
 351			regs[n] = rd32(E1000_TXDCTL(n));
 352		break;
 353	default:
 354		pr_info("%-15s %08x\n", reginfo->name, rd32(reginfo->ofs));
 355		return;
 356	}
 357
 358	snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
 359	pr_info("%-15s %08x %08x %08x %08x\n", rname, regs[0], regs[1],
 360		regs[2], regs[3]);
 361}
 362
 363/* igb_dump - Print registers, Tx-rings and Rx-rings */
 364static void igb_dump(struct igb_adapter *adapter)
 365{
 366	struct net_device *netdev = adapter->netdev;
 367	struct e1000_hw *hw = &adapter->hw;
 368	struct igb_reg_info *reginfo;
 369	struct igb_ring *tx_ring;
 370	union e1000_adv_tx_desc *tx_desc;
 371	struct my_u0 { u64 a; u64 b; } *u0;
 372	struct igb_ring *rx_ring;
 373	union e1000_adv_rx_desc *rx_desc;
 374	u32 staterr;
 375	u16 i, n;
 376
 377	if (!netif_msg_hw(adapter))
 378		return;
 379
 380	/* Print netdevice Info */
 381	if (netdev) {
 382		dev_info(&adapter->pdev->dev, "Net device Info\n");
 383		pr_info("Device Name     state            trans_start      last_rx\n");
 384		pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
 385			netdev->state, netdev->trans_start, netdev->last_rx);
 386	}
 387
 388	/* Print Registers */
 389	dev_info(&adapter->pdev->dev, "Register Dump\n");
 390	pr_info(" Register Name   Value\n");
 391	for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
 392	     reginfo->name; reginfo++) {
 393		igb_regdump(hw, reginfo);
 394	}
 395
 396	/* Print TX Ring Summary */
 397	if (!netdev || !netif_running(netdev))
 398		goto exit;
 399
 400	dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
 401	pr_info("Queue [NTU] [NTC] [bi(ntc)->dma  ] leng ntw timestamp\n");
 402	for (n = 0; n < adapter->num_tx_queues; n++) {
 403		struct igb_tx_buffer *buffer_info;
 404		tx_ring = adapter->tx_ring[n];
 405		buffer_info = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
 406		pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
 407			n, tx_ring->next_to_use, tx_ring->next_to_clean,
 408			(u64)dma_unmap_addr(buffer_info, dma),
 409			dma_unmap_len(buffer_info, len),
 410			buffer_info->next_to_watch,
 411			(u64)buffer_info->time_stamp);
 412	}
 413
 414	/* Print TX Rings */
 415	if (!netif_msg_tx_done(adapter))
 416		goto rx_ring_summary;
 417
 418	dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
 419
 420	/* Transmit Descriptor Formats
 421	 *
 422	 * Advanced Transmit Descriptor
 423	 *   +--------------------------------------------------------------+
 424	 * 0 |         Buffer Address [63:0]                                |
 425	 *   +--------------------------------------------------------------+
 426	 * 8 | PAYLEN  | PORTS  |CC|IDX | STA | DCMD  |DTYP|MAC|RSV| DTALEN |
 427	 *   +--------------------------------------------------------------+
 428	 *   63      46 45    40 39 38 36 35 32 31   24             15       0
 429	 */
 430
 431	for (n = 0; n < adapter->num_tx_queues; n++) {
 432		tx_ring = adapter->tx_ring[n];
 433		pr_info("------------------------------------\n");
 434		pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
 435		pr_info("------------------------------------\n");
 436		pr_info("T [desc]     [address 63:0  ] [PlPOCIStDDM Ln] [bi->dma       ] leng  ntw timestamp        bi->skb\n");
 437
 438		for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
 439			const char *next_desc;
 440			struct igb_tx_buffer *buffer_info;
 441			tx_desc = IGB_TX_DESC(tx_ring, i);
 442			buffer_info = &tx_ring->tx_buffer_info[i];
 443			u0 = (struct my_u0 *)tx_desc;
 444			if (i == tx_ring->next_to_use &&
 445			    i == tx_ring->next_to_clean)
 446				next_desc = " NTC/U";
 447			else if (i == tx_ring->next_to_use)
 448				next_desc = " NTU";
 449			else if (i == tx_ring->next_to_clean)
 450				next_desc = " NTC";
 451			else
 452				next_desc = "";
 453
 454			pr_info("T [0x%03X]    %016llX %016llX %016llX %04X  %p %016llX %p%s\n",
 455				i, le64_to_cpu(u0->a),
 456				le64_to_cpu(u0->b),
 457				(u64)dma_unmap_addr(buffer_info, dma),
 458				dma_unmap_len(buffer_info, len),
 459				buffer_info->next_to_watch,
 460				(u64)buffer_info->time_stamp,
 461				buffer_info->skb, next_desc);
 462
 463			if (netif_msg_pktdata(adapter) && buffer_info->skb)
 464				print_hex_dump(KERN_INFO, "",
 465					DUMP_PREFIX_ADDRESS,
 466					16, 1, buffer_info->skb->data,
 467					dma_unmap_len(buffer_info, len),
 468					true);
 469		}
 470	}
 471
 472	/* Print RX Rings Summary */
 473rx_ring_summary:
 474	dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
 475	pr_info("Queue [NTU] [NTC]\n");
 476	for (n = 0; n < adapter->num_rx_queues; n++) {
 477		rx_ring = adapter->rx_ring[n];
 478		pr_info(" %5d %5X %5X\n",
 479			n, rx_ring->next_to_use, rx_ring->next_to_clean);
 480	}
 481
 482	/* Print RX Rings */
 483	if (!netif_msg_rx_status(adapter))
 484		goto exit;
 485
 486	dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
 487
 488	/* Advanced Receive Descriptor (Read) Format
 489	 *    63                                           1        0
 490	 *    +-----------------------------------------------------+
 491	 *  0 |       Packet Buffer Address [63:1]           |A0/NSE|
 492	 *    +----------------------------------------------+------+
 493	 *  8 |       Header Buffer Address [63:1]           |  DD  |
 494	 *    +-----------------------------------------------------+
 495	 *
 496	 *
 497	 * Advanced Receive Descriptor (Write-Back) Format
 498	 *
 499	 *   63       48 47    32 31  30      21 20 17 16   4 3     0
 500	 *   +------------------------------------------------------+
 501	 * 0 | Packet     IP     |SPH| HDR_LEN   | RSV|Packet|  RSS |
 502	 *   | Checksum   Ident  |   |           |    | Type | Type |
 503	 *   +------------------------------------------------------+
 504	 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
 505	 *   +------------------------------------------------------+
 506	 *   63       48 47    32 31            20 19               0
 507	 */
 508
 509	for (n = 0; n < adapter->num_rx_queues; n++) {
 510		rx_ring = adapter->rx_ring[n];
 511		pr_info("------------------------------------\n");
 512		pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
 513		pr_info("------------------------------------\n");
 514		pr_info("R  [desc]      [ PktBuf     A0] [  HeadBuf   DD] [bi->dma       ] [bi->skb] <-- Adv Rx Read format\n");
 515		pr_info("RWB[desc]      [PcsmIpSHl PtRs] [vl er S cks ln] ---------------- [bi->skb] <-- Adv Rx Write-Back format\n");
 516
 517		for (i = 0; i < rx_ring->count; i++) {
 518			const char *next_desc;
 519			struct igb_rx_buffer *buffer_info;
 520			buffer_info = &rx_ring->rx_buffer_info[i];
 521			rx_desc = IGB_RX_DESC(rx_ring, i);
 522			u0 = (struct my_u0 *)rx_desc;
 523			staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 524
 525			if (i == rx_ring->next_to_use)
 526				next_desc = " NTU";
 527			else if (i == rx_ring->next_to_clean)
 528				next_desc = " NTC";
 529			else
 530				next_desc = "";
 531
 532			if (staterr & E1000_RXD_STAT_DD) {
 533				/* Descriptor Done */
 534				pr_info("%s[0x%03X]     %016llX %016llX ---------------- %s\n",
 535					"RWB", i,
 536					le64_to_cpu(u0->a),
 537					le64_to_cpu(u0->b),
 538					next_desc);
 539			} else {
 540				pr_info("%s[0x%03X]     %016llX %016llX %016llX %s\n",
 541					"R  ", i,
 542					le64_to_cpu(u0->a),
 543					le64_to_cpu(u0->b),
 544					(u64)buffer_info->dma,
 545					next_desc);
 546
 547				if (netif_msg_pktdata(adapter) &&
 548				    buffer_info->dma && buffer_info->page) {
 549					print_hex_dump(KERN_INFO, "",
 550					  DUMP_PREFIX_ADDRESS,
 551					  16, 1,
 552					  page_address(buffer_info->page) +
 553						      buffer_info->page_offset,
 554					  IGB_RX_BUFSZ, true);
 555				}
 556			}
 557		}
 558	}
 559
 560exit:
 561	return;
 562}
 563
 564/**
 565 *  igb_get_i2c_data - Reads the I2C SDA data bit
 566 *  @hw: pointer to hardware structure
 567 *  @i2cctl: Current value of I2CCTL register
 568 *
 569 *  Returns the I2C data bit value
 570 **/
 571static int igb_get_i2c_data(void *data)
 572{
 573	struct igb_adapter *adapter = (struct igb_adapter *)data;
 574	struct e1000_hw *hw = &adapter->hw;
 575	s32 i2cctl = rd32(E1000_I2CPARAMS);
 576
 577	return !!(i2cctl & E1000_I2C_DATA_IN);
 578}
 579
 580/**
 581 *  igb_set_i2c_data - Sets the I2C data bit
 582 *  @data: pointer to hardware structure
 583 *  @state: I2C data value (0 or 1) to set
 584 *
 585 *  Sets the I2C data bit
 586 **/
 587static void igb_set_i2c_data(void *data, int state)
 588{
 589	struct igb_adapter *adapter = (struct igb_adapter *)data;
 590	struct e1000_hw *hw = &adapter->hw;
 591	s32 i2cctl = rd32(E1000_I2CPARAMS);
 592
 593	if (state)
 594		i2cctl |= E1000_I2C_DATA_OUT;
 595	else
 596		i2cctl &= ~E1000_I2C_DATA_OUT;
 597
 598	i2cctl &= ~E1000_I2C_DATA_OE_N;
 599	i2cctl |= E1000_I2C_CLK_OE_N;
 600	wr32(E1000_I2CPARAMS, i2cctl);
 601	wrfl();
 602
 603}
 604
 605/**
 606 *  igb_set_i2c_clk - Sets the I2C SCL clock
 607 *  @data: pointer to hardware structure
 608 *  @state: state to set clock
 609 *
 610 *  Sets the I2C clock line to state
 611 **/
 612static void igb_set_i2c_clk(void *data, int state)
 613{
 614	struct igb_adapter *adapter = (struct igb_adapter *)data;
 615	struct e1000_hw *hw = &adapter->hw;
 616	s32 i2cctl = rd32(E1000_I2CPARAMS);
 617
 618	if (state) {
 619		i2cctl |= E1000_I2C_CLK_OUT;
 620		i2cctl &= ~E1000_I2C_CLK_OE_N;
 621	} else {
 622		i2cctl &= ~E1000_I2C_CLK_OUT;
 623		i2cctl &= ~E1000_I2C_CLK_OE_N;
 624	}
 625	wr32(E1000_I2CPARAMS, i2cctl);
 626	wrfl();
 627}
 628
 629/**
 630 *  igb_get_i2c_clk - Gets the I2C SCL clock state
 631 *  @data: pointer to hardware structure
 632 *
 633 *  Gets the I2C clock state
 634 **/
 635static int igb_get_i2c_clk(void *data)
 636{
 637	struct igb_adapter *adapter = (struct igb_adapter *)data;
 638	struct e1000_hw *hw = &adapter->hw;
 639	s32 i2cctl = rd32(E1000_I2CPARAMS);
 640
 641	return !!(i2cctl & E1000_I2C_CLK_IN);
 642}
 643
 644static const struct i2c_algo_bit_data igb_i2c_algo = {
 645	.setsda		= igb_set_i2c_data,
 646	.setscl		= igb_set_i2c_clk,
 647	.getsda		= igb_get_i2c_data,
 648	.getscl		= igb_get_i2c_clk,
 649	.udelay		= 5,
 650	.timeout	= 20,
 651};
 652
 653/**
 654 *  igb_get_hw_dev - return device
 655 *  @hw: pointer to hardware structure
 656 *
 657 *  used by hardware layer to print debugging information
 658 **/
 659struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
 660{
 661	struct igb_adapter *adapter = hw->back;
 662	return adapter->netdev;
 663}
 664
 665/**
 666 *  igb_init_module - Driver Registration Routine
 667 *
 668 *  igb_init_module is the first routine called when the driver is
 669 *  loaded. All it does is register with the PCI subsystem.
 670 **/
 671static int __init igb_init_module(void)
 672{
 673	int ret;
 674
 675	pr_info("%s - version %s\n",
 676	       igb_driver_string, igb_driver_version);
 677	pr_info("%s\n", igb_copyright);
 678
 679#ifdef CONFIG_IGB_DCA
 680	dca_register_notify(&dca_notifier);
 681#endif
 682	ret = pci_register_driver(&igb_driver);
 683	return ret;
 684}
 685
 686module_init(igb_init_module);
 687
 688/**
 689 *  igb_exit_module - Driver Exit Cleanup Routine
 690 *
 691 *  igb_exit_module is called just before the driver is removed
 692 *  from memory.
 693 **/
 694static void __exit igb_exit_module(void)
 695{
 696#ifdef CONFIG_IGB_DCA
 697	dca_unregister_notify(&dca_notifier);
 698#endif
 699	pci_unregister_driver(&igb_driver);
 700}
 701
 702module_exit(igb_exit_module);
 703
 704#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
 705/**
 706 *  igb_cache_ring_register - Descriptor ring to register mapping
 707 *  @adapter: board private structure to initialize
 708 *
 709 *  Once we know the feature-set enabled for the device, we'll cache
 710 *  the register offset the descriptor ring is assigned to.
 711 **/
 712static void igb_cache_ring_register(struct igb_adapter *adapter)
 713{
 714	int i = 0, j = 0;
 715	u32 rbase_offset = adapter->vfs_allocated_count;
 716
 717	switch (adapter->hw.mac.type) {
 718	case e1000_82576:
 719		/* The queues are allocated for virtualization such that VF 0
 720		 * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
 721		 * In order to avoid collision we start at the first free queue
 722		 * and continue consuming queues in the same sequence
 723		 */
 724		if (adapter->vfs_allocated_count) {
 725			for (; i < adapter->rss_queues; i++)
 726				adapter->rx_ring[i]->reg_idx = rbase_offset +
 727							       Q_IDX_82576(i);
 728		}
 729		/* Fall through */
 730	case e1000_82575:
 731	case e1000_82580:
 732	case e1000_i350:
 733	case e1000_i354:
 734	case e1000_i210:
 735	case e1000_i211:
 736		/* Fall through */
 737	default:
 738		for (; i < adapter->num_rx_queues; i++)
 739			adapter->rx_ring[i]->reg_idx = rbase_offset + i;
 740		for (; j < adapter->num_tx_queues; j++)
 741			adapter->tx_ring[j]->reg_idx = rbase_offset + j;
 742		break;
 743	}
 744}
 745
 746u32 igb_rd32(struct e1000_hw *hw, u32 reg)
 747{
 748	struct igb_adapter *igb = container_of(hw, struct igb_adapter, hw);
 749	u8 __iomem *hw_addr = ACCESS_ONCE(hw->hw_addr);
 750	u32 value = 0;
 751
 752	if (E1000_REMOVED(hw_addr))
 753		return ~value;
 754
 755	value = readl(&hw_addr[reg]);
 756
 757	/* reads should not return all F's */
 758	if (!(~value) && (!reg || !(~readl(hw_addr)))) {
 759		struct net_device *netdev = igb->netdev;
 760		hw->hw_addr = NULL;
 761		netif_device_detach(netdev);
 762		netdev_err(netdev, "PCIe link lost, device now detached\n");
 763	}
 764
 765	return value;
 766}
 767
 768/**
 769 *  igb_write_ivar - configure ivar for given MSI-X vector
 770 *  @hw: pointer to the HW structure
 771 *  @msix_vector: vector number we are allocating to a given ring
 772 *  @index: row index of IVAR register to write within IVAR table
 773 *  @offset: column offset of in IVAR, should be multiple of 8
 774 *
 775 *  This function is intended to handle the writing of the IVAR register
 776 *  for adapters 82576 and newer.  The IVAR table consists of 2 columns,
 777 *  each containing an cause allocation for an Rx and Tx ring, and a
 778 *  variable number of rows depending on the number of queues supported.
 779 **/
 780static void igb_write_ivar(struct e1000_hw *hw, int msix_vector,
 781			   int index, int offset)
 782{
 783	u32 ivar = array_rd32(E1000_IVAR0, index);
 784
 785	/* clear any bits that are currently set */
 786	ivar &= ~((u32)0xFF << offset);
 787
 788	/* write vector and valid bit */
 789	ivar |= (msix_vector | E1000_IVAR_VALID) << offset;
 790
 791	array_wr32(E1000_IVAR0, index, ivar);
 792}
 793
 794#define IGB_N0_QUEUE -1
 795static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
 796{
 797	struct igb_adapter *adapter = q_vector->adapter;
 798	struct e1000_hw *hw = &adapter->hw;
 799	int rx_queue = IGB_N0_QUEUE;
 800	int tx_queue = IGB_N0_QUEUE;
 801	u32 msixbm = 0;
 802
 803	if (q_vector->rx.ring)
 804		rx_queue = q_vector->rx.ring->reg_idx;
 805	if (q_vector->tx.ring)
 806		tx_queue = q_vector->tx.ring->reg_idx;
 807
 808	switch (hw->mac.type) {
 809	case e1000_82575:
 810		/* The 82575 assigns vectors using a bitmask, which matches the
 811		 * bitmask for the EICR/EIMS/EIMC registers.  To assign one
 812		 * or more queues to a vector, we write the appropriate bits
 813		 * into the MSIXBM register for that vector.
 814		 */
 815		if (rx_queue > IGB_N0_QUEUE)
 816			msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
 817		if (tx_queue > IGB_N0_QUEUE)
 818			msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
 819		if (!(adapter->flags & IGB_FLAG_HAS_MSIX) && msix_vector == 0)
 820			msixbm |= E1000_EIMS_OTHER;
 821		array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
 822		q_vector->eims_value = msixbm;
 823		break;
 824	case e1000_82576:
 825		/* 82576 uses a table that essentially consists of 2 columns
 826		 * with 8 rows.  The ordering is column-major so we use the
 827		 * lower 3 bits as the row index, and the 4th bit as the
 828		 * column offset.
 829		 */
 830		if (rx_queue > IGB_N0_QUEUE)
 831			igb_write_ivar(hw, msix_vector,
 832				       rx_queue & 0x7,
 833				       (rx_queue & 0x8) << 1);
 834		if (tx_queue > IGB_N0_QUEUE)
 835			igb_write_ivar(hw, msix_vector,
 836				       tx_queue & 0x7,
 837				       ((tx_queue & 0x8) << 1) + 8);
 838		q_vector->eims_value = 1 << msix_vector;
 839		break;
 840	case e1000_82580:
 841	case e1000_i350:
 842	case e1000_i354:
 843	case e1000_i210:
 844	case e1000_i211:
 845		/* On 82580 and newer adapters the scheme is similar to 82576
 846		 * however instead of ordering column-major we have things
 847		 * ordered row-major.  So we traverse the table by using
 848		 * bit 0 as the column offset, and the remaining bits as the
 849		 * row index.
 850		 */
 851		if (rx_queue > IGB_N0_QUEUE)
 852			igb_write_ivar(hw, msix_vector,
 853				       rx_queue >> 1,
 854				       (rx_queue & 0x1) << 4);
 855		if (tx_queue > IGB_N0_QUEUE)
 856			igb_write_ivar(hw, msix_vector,
 857				       tx_queue >> 1,
 858				       ((tx_queue & 0x1) << 4) + 8);
 859		q_vector->eims_value = 1 << msix_vector;
 860		break;
 861	default:
 862		BUG();
 863		break;
 864	}
 865
 866	/* add q_vector eims value to global eims_enable_mask */
 867	adapter->eims_enable_mask |= q_vector->eims_value;
 868
 869	/* configure q_vector to set itr on first interrupt */
 870	q_vector->set_itr = 1;
 871}
 872
 873/**
 874 *  igb_configure_msix - Configure MSI-X hardware
 875 *  @adapter: board private structure to initialize
 876 *
 877 *  igb_configure_msix sets up the hardware to properly
 878 *  generate MSI-X interrupts.
 879 **/
 880static void igb_configure_msix(struct igb_adapter *adapter)
 881{
 882	u32 tmp;
 883	int i, vector = 0;
 884	struct e1000_hw *hw = &adapter->hw;
 885
 886	adapter->eims_enable_mask = 0;
 887
 888	/* set vector for other causes, i.e. link changes */
 889	switch (hw->mac.type) {
 890	case e1000_82575:
 891		tmp = rd32(E1000_CTRL_EXT);
 892		/* enable MSI-X PBA support*/
 893		tmp |= E1000_CTRL_EXT_PBA_CLR;
 894
 895		/* Auto-Mask interrupts upon ICR read. */
 896		tmp |= E1000_CTRL_EXT_EIAME;
 897		tmp |= E1000_CTRL_EXT_IRCA;
 898
 899		wr32(E1000_CTRL_EXT, tmp);
 900
 901		/* enable msix_other interrupt */
 902		array_wr32(E1000_MSIXBM(0), vector++, E1000_EIMS_OTHER);
 903		adapter->eims_other = E1000_EIMS_OTHER;
 904
 905		break;
 906
 907	case e1000_82576:
 908	case e1000_82580:
 909	case e1000_i350:
 910	case e1000_i354:
 911	case e1000_i210:
 912	case e1000_i211:
 913		/* Turn on MSI-X capability first, or our settings
 914		 * won't stick.  And it will take days to debug.
 915		 */
 916		wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
 917		     E1000_GPIE_PBA | E1000_GPIE_EIAME |
 918		     E1000_GPIE_NSICR);
 919
 920		/* enable msix_other interrupt */
 921		adapter->eims_other = 1 << vector;
 922		tmp = (vector++ | E1000_IVAR_VALID) << 8;
 923
 924		wr32(E1000_IVAR_MISC, tmp);
 925		break;
 926	default:
 927		/* do nothing, since nothing else supports MSI-X */
 928		break;
 929	} /* switch (hw->mac.type) */
 930
 931	adapter->eims_enable_mask |= adapter->eims_other;
 932
 933	for (i = 0; i < adapter->num_q_vectors; i++)
 934		igb_assign_vector(adapter->q_vector[i], vector++);
 935
 936	wrfl();
 937}
 938
 939/**
 940 *  igb_request_msix - Initialize MSI-X interrupts
 941 *  @adapter: board private structure to initialize
 942 *
 943 *  igb_request_msix allocates MSI-X vectors and requests interrupts from the
 944 *  kernel.
 945 **/
 946static int igb_request_msix(struct igb_adapter *adapter)
 947{
 948	struct net_device *netdev = adapter->netdev;
 949	int i, err = 0, vector = 0, free_vector = 0;
 950
 951	err = request_irq(adapter->msix_entries[vector].vector,
 952			  igb_msix_other, 0, netdev->name, adapter);
 953	if (err)
 954		goto err_out;
 955
 956	for (i = 0; i < adapter->num_q_vectors; i++) {
 957		struct igb_q_vector *q_vector = adapter->q_vector[i];
 958
 959		vector++;
 960
 961		q_vector->itr_register = adapter->io_addr + E1000_EITR(vector);
 962
 963		if (q_vector->rx.ring && q_vector->tx.ring)
 964			sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
 965				q_vector->rx.ring->queue_index);
 966		else if (q_vector->tx.ring)
 967			sprintf(q_vector->name, "%s-tx-%u", netdev->name,
 968				q_vector->tx.ring->queue_index);
 969		else if (q_vector->rx.ring)
 970			sprintf(q_vector->name, "%s-rx-%u", netdev->name,
 971				q_vector->rx.ring->queue_index);
 972		else
 973			sprintf(q_vector->name, "%s-unused", netdev->name);
 974
 975		err = request_irq(adapter->msix_entries[vector].vector,
 976				  igb_msix_ring, 0, q_vector->name,
 977				  q_vector);
 978		if (err)
 979			goto err_free;
 980	}
 981
 982	igb_configure_msix(adapter);
 983	return 0;
 984
 985err_free:
 986	/* free already assigned IRQs */
 987	free_irq(adapter->msix_entries[free_vector++].vector, adapter);
 988
 989	vector--;
 990	for (i = 0; i < vector; i++) {
 991		free_irq(adapter->msix_entries[free_vector++].vector,
 992			 adapter->q_vector[i]);
 993	}
 994err_out:
 995	return err;
 996}
 997
 998/**
 999 *  igb_free_q_vector - Free memory allocated for specific interrupt vector
1000 *  @adapter: board private structure to initialize
1001 *  @v_idx: Index of vector to be freed
1002 *
1003 *  This function frees the memory allocated to the q_vector.
1004 **/
1005static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx)
1006{
1007	struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
1008
1009	adapter->q_vector[v_idx] = NULL;
1010
1011	/* igb_get_stats64() might access the rings on this vector,
1012	 * we must wait a grace period before freeing it.
1013	 */
1014	if (q_vector)
1015		kfree_rcu(q_vector, rcu);
1016}
1017
1018/**
1019 *  igb_reset_q_vector - Reset config for interrupt vector
1020 *  @adapter: board private structure to initialize
1021 *  @v_idx: Index of vector to be reset
1022 *
1023 *  If NAPI is enabled it will delete any references to the
1024 *  NAPI struct. This is preparation for igb_free_q_vector.
1025 **/
1026static void igb_reset_q_vector(struct igb_adapter *adapter, int v_idx)
1027{
1028	struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
1029
1030	/* Coming from igb_set_interrupt_capability, the vectors are not yet
1031	 * allocated. So, q_vector is NULL so we should stop here.
1032	 */
1033	if (!q_vector)
1034		return;
1035
1036	if (q_vector->tx.ring)
1037		adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL;
1038
1039	if (q_vector->rx.ring)
1040		adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL;
1041
1042	netif_napi_del(&q_vector->napi);
1043
1044}
1045
1046static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
1047{
1048	int v_idx = adapter->num_q_vectors;
1049
1050	if (adapter->flags & IGB_FLAG_HAS_MSIX)
1051		pci_disable_msix(adapter->pdev);
1052	else if (adapter->flags & IGB_FLAG_HAS_MSI)
1053		pci_disable_msi(adapter->pdev);
1054
1055	while (v_idx--)
1056		igb_reset_q_vector(adapter, v_idx);
1057}
1058
1059/**
1060 *  igb_free_q_vectors - Free memory allocated for interrupt vectors
1061 *  @adapter: board private structure to initialize
1062 *
1063 *  This function frees the memory allocated to the q_vectors.  In addition if
1064 *  NAPI is enabled it will delete any references to the NAPI struct prior
1065 *  to freeing the q_vector.
1066 **/
1067static void igb_free_q_vectors(struct igb_adapter *adapter)
1068{
1069	int v_idx = adapter->num_q_vectors;
1070
1071	adapter->num_tx_queues = 0;
1072	adapter->num_rx_queues = 0;
1073	adapter->num_q_vectors = 0;
1074
1075	while (v_idx--) {
1076		igb_reset_q_vector(adapter, v_idx);
1077		igb_free_q_vector(adapter, v_idx);
1078	}
1079}
1080
1081/**
1082 *  igb_clear_interrupt_scheme - reset the device to a state of no interrupts
1083 *  @adapter: board private structure to initialize
1084 *
1085 *  This function resets the device so that it has 0 Rx queues, Tx queues, and
1086 *  MSI-X interrupts allocated.
1087 */
1088static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
1089{
1090	igb_free_q_vectors(adapter);
1091	igb_reset_interrupt_capability(adapter);
1092}
1093
1094/**
1095 *  igb_set_interrupt_capability - set MSI or MSI-X if supported
1096 *  @adapter: board private structure to initialize
1097 *  @msix: boolean value of MSIX capability
1098 *
1099 *  Attempt to configure interrupts using the best available
1100 *  capabilities of the hardware and kernel.
1101 **/
1102static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix)
1103{
1104	int err;
1105	int numvecs, i;
1106
1107	if (!msix)
1108		goto msi_only;
1109	adapter->flags |= IGB_FLAG_HAS_MSIX;
1110
1111	/* Number of supported queues. */
1112	adapter->num_rx_queues = adapter->rss_queues;
1113	if (adapter->vfs_allocated_count)
1114		adapter->num_tx_queues = 1;
1115	else
1116		adapter->num_tx_queues = adapter->rss_queues;
1117
1118	/* start with one vector for every Rx queue */
1119	numvecs = adapter->num_rx_queues;
1120
1121	/* if Tx handler is separate add 1 for every Tx queue */
1122	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
1123		numvecs += adapter->num_tx_queues;
1124
1125	/* store the number of vectors reserved for queues */
1126	adapter->num_q_vectors = numvecs;
1127
1128	/* add 1 vector for link status interrupts */
1129	numvecs++;
1130	for (i = 0; i < numvecs; i++)
1131		adapter->msix_entries[i].entry = i;
1132
1133	err = pci_enable_msix_range(adapter->pdev,
1134				    adapter->msix_entries,
1135				    numvecs,
1136				    numvecs);
1137	if (err > 0)
1138		return;
1139
1140	igb_reset_interrupt_capability(adapter);
1141
1142	/* If we can't do MSI-X, try MSI */
1143msi_only:
1144	adapter->flags &= ~IGB_FLAG_HAS_MSIX;
1145#ifdef CONFIG_PCI_IOV
1146	/* disable SR-IOV for non MSI-X configurations */
1147	if (adapter->vf_data) {
1148		struct e1000_hw *hw = &adapter->hw;
1149		/* disable iov and allow time for transactions to clear */
1150		pci_disable_sriov(adapter->pdev);
1151		msleep(500);
1152
1153		kfree(adapter->vf_data);
1154		adapter->vf_data = NULL;
1155		wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
1156		wrfl();
1157		msleep(100);
1158		dev_info(&adapter->pdev->dev, "IOV Disabled\n");
1159	}
1160#endif
1161	adapter->vfs_allocated_count = 0;
1162	adapter->rss_queues = 1;
1163	adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
1164	adapter->num_rx_queues = 1;
1165	adapter->num_tx_queues = 1;
1166	adapter->num_q_vectors = 1;
1167	if (!pci_enable_msi(adapter->pdev))
1168		adapter->flags |= IGB_FLAG_HAS_MSI;
1169}
1170
1171static void igb_add_ring(struct igb_ring *ring,
1172			 struct igb_ring_container *head)
1173{
1174	head->ring = ring;
1175	head->count++;
1176}
1177
1178/**
1179 *  igb_alloc_q_vector - Allocate memory for a single interrupt vector
1180 *  @adapter: board private structure to initialize
1181 *  @v_count: q_vectors allocated on adapter, used for ring interleaving
1182 *  @v_idx: index of vector in adapter struct
1183 *  @txr_count: total number of Tx rings to allocate
1184 *  @txr_idx: index of first Tx ring to allocate
1185 *  @rxr_count: total number of Rx rings to allocate
1186 *  @rxr_idx: index of first Rx ring to allocate
1187 *
1188 *  We allocate one q_vector.  If allocation fails we return -ENOMEM.
1189 **/
1190static int igb_alloc_q_vector(struct igb_adapter *adapter,
1191			      int v_count, int v_idx,
1192			      int txr_count, int txr_idx,
1193			      int rxr_count, int rxr_idx)
1194{
1195	struct igb_q_vector *q_vector;
1196	struct igb_ring *ring;
1197	int ring_count, size;
1198
1199	/* igb only supports 1 Tx and/or 1 Rx queue per vector */
1200	if (txr_count > 1 || rxr_count > 1)
1201		return -ENOMEM;
1202
1203	ring_count = txr_count + rxr_count;
1204	size = sizeof(struct igb_q_vector) +
1205	       (sizeof(struct igb_ring) * ring_count);
1206
1207	/* allocate q_vector and rings */
1208	q_vector = adapter->q_vector[v_idx];
1209	if (!q_vector) {
1210		q_vector = kzalloc(size, GFP_KERNEL);
1211	} else if (size > ksize(q_vector)) {
1212		kfree_rcu(q_vector, rcu);
1213		q_vector = kzalloc(size, GFP_KERNEL);
1214	} else {
1215		memset(q_vector, 0, size);
1216	}
1217	if (!q_vector)
1218		return -ENOMEM;
1219
1220	/* initialize NAPI */
1221	netif_napi_add(adapter->netdev, &q_vector->napi,
1222		       igb_poll, 64);
1223
1224	/* tie q_vector and adapter together */
1225	adapter->q_vector[v_idx] = q_vector;
1226	q_vector->adapter = adapter;
1227
1228	/* initialize work limits */
1229	q_vector->tx.work_limit = adapter->tx_work_limit;
1230
1231	/* initialize ITR configuration */
1232	q_vector->itr_register = adapter->io_addr + E1000_EITR(0);
1233	q_vector->itr_val = IGB_START_ITR;
1234
1235	/* initialize pointer to rings */
1236	ring = q_vector->ring;
1237
1238	/* intialize ITR */
1239	if (rxr_count) {
1240		/* rx or rx/tx vector */
1241		if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3)
1242			q_vector->itr_val = adapter->rx_itr_setting;
1243	} else {
1244		/* tx only vector */
1245		if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3)
1246			q_vector->itr_val = adapter->tx_itr_setting;
1247	}
1248
1249	if (txr_count) {
1250		/* assign generic ring traits */
1251		ring->dev = &adapter->pdev->dev;
1252		ring->netdev = adapter->netdev;
1253
1254		/* configure backlink on ring */
1255		ring->q_vector = q_vector;
1256
1257		/* update q_vector Tx values */
1258		igb_add_ring(ring, &q_vector->tx);
1259
1260		/* For 82575, context index must be unique per ring. */
1261		if (adapter->hw.mac.type == e1000_82575)
1262			set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags);
1263
1264		/* apply Tx specific ring traits */
1265		ring->count = adapter->tx_ring_count;
1266		ring->queue_index = txr_idx;
1267
1268		u64_stats_init(&ring->tx_syncp);
1269		u64_stats_init(&ring->tx_syncp2);
1270
1271		/* assign ring to adapter */
1272		adapter->tx_ring[txr_idx] = ring;
1273
1274		/* push pointer to next ring */
1275		ring++;
1276	}
1277
1278	if (rxr_count) {
1279		/* assign generic ring traits */
1280		ring->dev = &adapter->pdev->dev;
1281		ring->netdev = adapter->netdev;
1282
1283		/* configure backlink on ring */
1284		ring->q_vector = q_vector;
1285
1286		/* update q_vector Rx values */
1287		igb_add_ring(ring, &q_vector->rx);
1288
1289		/* set flag indicating ring supports SCTP checksum offload */
1290		if (adapter->hw.mac.type >= e1000_82576)
1291			set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags);
1292
1293		/* On i350, i354, i210, and i211, loopback VLAN packets
1294		 * have the tag byte-swapped.
1295		 */
1296		if (adapter->hw.mac.type >= e1000_i350)
1297			set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags);
1298
1299		/* apply Rx specific ring traits */
1300		ring->count = adapter->rx_ring_count;
1301		ring->queue_index = rxr_idx;
1302
1303		u64_stats_init(&ring->rx_syncp);
1304
1305		/* assign ring to adapter */
1306		adapter->rx_ring[rxr_idx] = ring;
1307	}
1308
1309	return 0;
1310}
1311
1312
1313/**
1314 *  igb_alloc_q_vectors - Allocate memory for interrupt vectors
1315 *  @adapter: board private structure to initialize
1316 *
1317 *  We allocate one q_vector per queue interrupt.  If allocation fails we
1318 *  return -ENOMEM.
1319 **/
1320static int igb_alloc_q_vectors(struct igb_adapter *adapter)
1321{
1322	int q_vectors = adapter->num_q_vectors;
1323	int rxr_remaining = adapter->num_rx_queues;
1324	int txr_remaining = adapter->num_tx_queues;
1325	int rxr_idx = 0, txr_idx = 0, v_idx = 0;
1326	int err;
1327
1328	if (q_vectors >= (rxr_remaining + txr_remaining)) {
1329		for (; rxr_remaining; v_idx++) {
1330			err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
1331						 0, 0, 1, rxr_idx);
1332
1333			if (err)
1334				goto err_out;
1335
1336			/* update counts and index */
1337			rxr_remaining--;
1338			rxr_idx++;
1339		}
1340	}
1341
1342	for (; v_idx < q_vectors; v_idx++) {
1343		int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx);
1344		int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx);
1345
1346		err = igb_alloc_q_vector(adapter, q_vectors, v_idx,
1347					 tqpv, txr_idx, rqpv, rxr_idx);
1348
1349		if (err)
1350			goto err_out;
1351
1352		/* update counts and index */
1353		rxr_remaining -= rqpv;
1354		txr_remaining -= tqpv;
1355		rxr_idx++;
1356		txr_idx++;
1357	}
1358
1359	return 0;
1360
1361err_out:
1362	adapter->num_tx_queues = 0;
1363	adapter->num_rx_queues = 0;
1364	adapter->num_q_vectors = 0;
1365
1366	while (v_idx--)
1367		igb_free_q_vector(adapter, v_idx);
1368
1369	return -ENOMEM;
1370}
1371
1372/**
1373 *  igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
1374 *  @adapter: board private structure to initialize
1375 *  @msix: boolean value of MSIX capability
1376 *
1377 *  This function initializes the interrupts and allocates all of the queues.
1378 **/
1379static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix)
1380{
1381	struct pci_dev *pdev = adapter->pdev;
1382	int err;
1383
1384	igb_set_interrupt_capability(adapter, msix);
1385
1386	err = igb_alloc_q_vectors(adapter);
1387	if (err) {
1388		dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
1389		goto err_alloc_q_vectors;
1390	}
1391
1392	igb_cache_ring_register(adapter);
1393
1394	return 0;
1395
1396err_alloc_q_vectors:
1397	igb_reset_interrupt_capability(adapter);
1398	return err;
1399}
1400
1401/**
1402 *  igb_request_irq - initialize interrupts
1403 *  @adapter: board private structure to initialize
1404 *
1405 *  Attempts to configure interrupts using the best available
1406 *  capabilities of the hardware and kernel.
1407 **/
1408static int igb_request_irq(struct igb_adapter *adapter)
1409{
1410	struct net_device *netdev = adapter->netdev;
1411	struct pci_dev *pdev = adapter->pdev;
1412	int err = 0;
1413
1414	if (adapter->flags & IGB_FLAG_HAS_MSIX) {
1415		err = igb_request_msix(adapter);
1416		if (!err)
1417			goto request_done;
1418		/* fall back to MSI */
1419		igb_free_all_tx_resources(adapter);
1420		igb_free_all_rx_resources(adapter);
1421
1422		igb_clear_interrupt_scheme(adapter);
1423		err = igb_init_interrupt_scheme(adapter, false);
1424		if (err)
1425			goto request_done;
1426
1427		igb_setup_all_tx_resources(adapter);
1428		igb_setup_all_rx_resources(adapter);
1429		igb_configure(adapter);
1430	}
1431
1432	igb_assign_vector(adapter->q_vector[0], 0);
1433
1434	if (adapter->flags & IGB_FLAG_HAS_MSI) {
1435		err = request_irq(pdev->irq, igb_intr_msi, 0,
1436				  netdev->name, adapter);
1437		if (!err)
1438			goto request_done;
1439
1440		/* fall back to legacy interrupts */
1441		igb_reset_interrupt_capability(adapter);
1442		adapter->flags &= ~IGB_FLAG_HAS_MSI;
1443	}
1444
1445	err = request_irq(pdev->irq, igb_intr, IRQF_SHARED,
1446			  netdev->name, adapter);
1447
1448	if (err)
1449		dev_err(&pdev->dev, "Error %d getting interrupt\n",
1450			err);
1451
1452request_done:
1453	return err;
1454}
1455
1456static void igb_free_irq(struct igb_adapter *adapter)
1457{
1458	if (adapter->flags & IGB_FLAG_HAS_MSIX) {
1459		int vector = 0, i;
1460
1461		free_irq(adapter->msix_entries[vector++].vector, adapter);
1462
1463		for (i = 0; i < adapter->num_q_vectors; i++)
1464			free_irq(adapter->msix_entries[vector++].vector,
1465				 adapter->q_vector[i]);
1466	} else {
1467		free_irq(adapter->pdev->irq, adapter);
1468	}
1469}
1470
1471/**
1472 *  igb_irq_disable - Mask off interrupt generation on the NIC
1473 *  @adapter: board private structure
1474 **/
1475static void igb_irq_disable(struct igb_adapter *adapter)
1476{
1477	struct e1000_hw *hw = &adapter->hw;
1478
1479	/* we need to be careful when disabling interrupts.  The VFs are also
1480	 * mapped into these registers and so clearing the bits can cause
1481	 * issues on the VF drivers so we only need to clear what we set
1482	 */
1483	if (adapter->flags & IGB_FLAG_HAS_MSIX) {
1484		u32 regval = rd32(E1000_EIAM);
1485
1486		wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
1487		wr32(E1000_EIMC, adapter->eims_enable_mask);
1488		regval = rd32(E1000_EIAC);
1489		wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
1490	}
1491
1492	wr32(E1000_IAM, 0);
1493	wr32(E1000_IMC, ~0);
1494	wrfl();
1495	if (adapter->flags & IGB_FLAG_HAS_MSIX) {
1496		int i;
1497
1498		for (i = 0; i < adapter->num_q_vectors; i++)
1499			synchronize_irq(adapter->msix_entries[i].vector);
1500	} else {
1501		synchronize_irq(adapter->pdev->irq);
1502	}
1503}
1504
1505/**
1506 *  igb_irq_enable - Enable default interrupt generation settings
1507 *  @adapter: board private structure
1508 **/
1509static void igb_irq_enable(struct igb_adapter *adapter)
1510{
1511	struct e1000_hw *hw = &adapter->hw;
1512
1513	if (adapter->flags & IGB_FLAG_HAS_MSIX) {
1514		u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA;
1515		u32 regval = rd32(E1000_EIAC);
1516
1517		wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
1518		regval = rd32(E1000_EIAM);
1519		wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
1520		wr32(E1000_EIMS, adapter->eims_enable_mask);
1521		if (adapter->vfs_allocated_count) {
1522			wr32(E1000_MBVFIMR, 0xFF);
1523			ims |= E1000_IMS_VMMB;
1524		}
1525		wr32(E1000_IMS, ims);
1526	} else {
1527		wr32(E1000_IMS, IMS_ENABLE_MASK |
1528				E1000_IMS_DRSTA);
1529		wr32(E1000_IAM, IMS_ENABLE_MASK |
1530				E1000_IMS_DRSTA);
1531	}
1532}
1533
1534static void igb_update_mng_vlan(struct igb_adapter *adapter)
1535{
1536	struct e1000_hw *hw = &adapter->hw;
1537	u16 pf_id = adapter->vfs_allocated_count;
1538	u16 vid = adapter->hw.mng_cookie.vlan_id;
1539	u16 old_vid = adapter->mng_vlan_id;
1540
1541	if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
1542		/* add VID to filter table */
1543		igb_vfta_set(hw, vid, pf_id, true, true);
1544		adapter->mng_vlan_id = vid;
1545	} else {
1546		adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
1547	}
1548
1549	if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
1550	    (vid != old_vid) &&
1551	    !test_bit(old_vid, adapter->active_vlans)) {
1552		/* remove VID from filter table */
1553		igb_vfta_set(hw, vid, pf_id, false, true);
1554	}
1555}
1556
1557/**
1558 *  igb_release_hw_control - release control of the h/w to f/w
1559 *  @adapter: address of board private structure
1560 *
1561 *  igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
1562 *  For ASF and Pass Through versions of f/w this means that the
1563 *  driver is no longer loaded.
1564 **/
1565static void igb_release_hw_control(struct igb_adapter *adapter)
1566{
1567	struct e1000_hw *hw = &adapter->hw;
1568	u32 ctrl_ext;
1569
1570	/* Let firmware take over control of h/w */
1571	ctrl_ext = rd32(E1000_CTRL_EXT);
1572	wr32(E1000_CTRL_EXT,
1573			ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
1574}
1575
1576/**
1577 *  igb_get_hw_control - get control of the h/w from f/w
1578 *  @adapter: address of board private structure
1579 *
1580 *  igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
1581 *  For ASF and Pass Through versions of f/w this means that
1582 *  the driver is loaded.
1583 **/
1584static void igb_get_hw_control(struct igb_adapter *adapter)
1585{
1586	struct e1000_hw *hw = &adapter->hw;
1587	u32 ctrl_ext;
1588
1589	/* Let firmware know the driver has taken over */
1590	ctrl_ext = rd32(E1000_CTRL_EXT);
1591	wr32(E1000_CTRL_EXT,
1592			ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
1593}
1594
1595/**
1596 *  igb_configure - configure the hardware for RX and TX
1597 *  @adapter: private board structure
1598 **/
1599static void igb_configure(struct igb_adapter *adapter)
1600{
1601	struct net_device *netdev = adapter->netdev;
1602	int i;
1603
1604	igb_get_hw_control(adapter);
1605	igb_set_rx_mode(netdev);
1606
1607	igb_restore_vlan(adapter);
1608
1609	igb_setup_tctl(adapter);
1610	igb_setup_mrqc(adapter);
1611	igb_setup_rctl(adapter);
1612
1613	igb_configure_tx(adapter);
1614	igb_configure_rx(adapter);
1615
1616	igb_rx_fifo_flush_82575(&adapter->hw);
1617
1618	/* call igb_desc_unused which always leaves
1619	 * at least 1 descriptor unused to make sure
1620	 * next_to_use != next_to_clean
1621	 */
1622	for (i = 0; i < adapter->num_rx_queues; i++) {
1623		struct igb_ring *ring = adapter->rx_ring[i];
1624		igb_alloc_rx_buffers(ring, igb_desc_unused(ring));
1625	}
1626}
1627
1628/**
1629 *  igb_power_up_link - Power up the phy/serdes link
1630 *  @adapter: address of board private structure
1631 **/
1632void igb_power_up_link(struct igb_adapter *adapter)
1633{
1634	igb_reset_phy(&adapter->hw);
1635
1636	if (adapter->hw.phy.media_type == e1000_media_type_copper)
1637		igb_power_up_phy_copper(&adapter->hw);
1638	else
1639		igb_power_up_serdes_link_82575(&adapter->hw);
1640
1641	igb_setup_link(&adapter->hw);
1642}
1643
1644/**
1645 *  igb_power_down_link - Power down the phy/serdes link
1646 *  @adapter: address of board private structure
1647 */
1648static void igb_power_down_link(struct igb_adapter *adapter)
1649{
1650	if (adapter->hw.phy.media_type == e1000_media_type_copper)
1651		igb_power_down_phy_copper_82575(&adapter->hw);
1652	else
1653		igb_shutdown_serdes_link_82575(&adapter->hw);
1654}
1655
1656/**
1657 * Detect and switch function for Media Auto Sense
1658 * @adapter: address of the board private structure
1659 **/
1660static void igb_check_swap_media(struct igb_adapter *adapter)
1661{
1662	struct e1000_hw *hw = &adapter->hw;
1663	u32 ctrl_ext, connsw;
1664	bool swap_now = false;
1665
1666	ctrl_ext = rd32(E1000_CTRL_EXT);
1667	connsw = rd32(E1000_CONNSW);
1668
1669	/* need to live swap if current media is copper and we have fiber/serdes
1670	 * to go to.
1671	 */
1672
1673	if ((hw->phy.media_type == e1000_media_type_copper) &&
1674	    (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
1675		swap_now = true;
1676	} else if (!(connsw & E1000_CONNSW_SERDESD)) {
1677		/* copper signal takes time to appear */
1678		if (adapter->copper_tries < 4) {
1679			adapter->copper_tries++;
1680			connsw |= E1000_CONNSW_AUTOSENSE_CONF;
1681			wr32(E1000_CONNSW, connsw);
1682			return;
1683		} else {
1684			adapter->copper_tries = 0;
1685			if ((connsw & E1000_CONNSW_PHYSD) &&
1686			    (!(connsw & E1000_CONNSW_PHY_PDN))) {
1687				swap_now = true;
1688				connsw &= ~E1000_CONNSW_AUTOSENSE_CONF;
1689				wr32(E1000_CONNSW, connsw);
1690			}
1691		}
1692	}
1693
1694	if (!swap_now)
1695		return;
1696
1697	switch (hw->phy.media_type) {
1698	case e1000_media_type_copper:
1699		netdev_info(adapter->netdev,
1700			"MAS: changing media to fiber/serdes\n");
1701		ctrl_ext |=
1702			E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
1703		adapter->flags |= IGB_FLAG_MEDIA_RESET;
1704		adapter->copper_tries = 0;
1705		break;
1706	case e1000_media_type_internal_serdes:
1707	case e1000_media_type_fiber:
1708		netdev_info(adapter->netdev,
1709			"MAS: changing media to copper\n");
1710		ctrl_ext &=
1711			~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
1712		adapter->flags |= IGB_FLAG_MEDIA_RESET;
1713		break;
1714	default:
1715		/* shouldn't get here during regular operation */
1716		netdev_err(adapter->netdev,
1717			"AMS: Invalid media type found, returning\n");
1718		break;
1719	}
1720	wr32(E1000_CTRL_EXT, ctrl_ext);
1721}
1722
1723/**
1724 *  igb_up - Open the interface and prepare it to handle traffic
1725 *  @adapter: board private structure
1726 **/
1727int igb_up(struct igb_adapter *adapter)
1728{
1729	struct e1000_hw *hw = &adapter->hw;
1730	int i;
1731
1732	/* hardware has been reset, we need to reload some things */
1733	igb_configure(adapter);
1734
1735	clear_bit(__IGB_DOWN, &adapter->state);
1736
1737	for (i = 0; i < adapter->num_q_vectors; i++)
1738		napi_enable(&(adapter->q_vector[i]->napi));
1739
1740	if (adapter->flags & IGB_FLAG_HAS_MSIX)
1741		igb_configure_msix(adapter);
1742	else
1743		igb_assign_vector(adapter->q_vector[0], 0);
1744
1745	/* Clear any pending interrupts. */
1746	rd32(E1000_ICR);
1747	igb_irq_enable(adapter);
1748
1749	/* notify VFs that reset has been completed */
1750	if (adapter->vfs_allocated_count) {
1751		u32 reg_data = rd32(E1000_CTRL_EXT);
1752
1753		reg_data |= E1000_CTRL_EXT_PFRSTD;
1754		wr32(E1000_CTRL_EXT, reg_data);
1755	}
1756
1757	netif_tx_start_all_queues(adapter->netdev);
1758
1759	/* start the watchdog. */
1760	hw->mac.get_link_status = 1;
1761	schedule_work(&adapter->watchdog_task);
1762
1763	if ((adapter->flags & IGB_FLAG_EEE) &&
1764	    (!hw->dev_spec._82575.eee_disable))
1765		adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
1766
1767	return 0;
1768}
1769
1770void igb_down(struct igb_adapter *adapter)
1771{
1772	struct net_device *netdev = adapter->netdev;
1773	struct e1000_hw *hw = &adapter->hw;
1774	u32 tctl, rctl;
1775	int i;
1776
1777	/* signal that we're down so the interrupt handler does not
1778	 * reschedule our watchdog timer
1779	 */
1780	set_bit(__IGB_DOWN, &adapter->state);
1781
1782	/* disable receives in the hardware */
1783	rctl = rd32(E1000_RCTL);
1784	wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
1785	/* flush and sleep below */
1786
1787	netif_carrier_off(netdev);
1788	netif_tx_stop_all_queues(netdev);
1789
1790	/* disable transmits in the hardware */
1791	tctl = rd32(E1000_TCTL);
1792	tctl &= ~E1000_TCTL_EN;
1793	wr32(E1000_TCTL, tctl);
1794	/* flush both disables and wait for them to finish */
1795	wrfl();
1796	usleep_range(10000, 11000);
1797
1798	igb_irq_disable(adapter);
1799
1800	adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
1801
1802	for (i = 0; i < adapter->num_q_vectors; i++) {
1803		if (adapter->q_vector[i]) {
1804			napi_synchronize(&adapter->q_vector[i]->napi);
1805			napi_disable(&adapter->q_vector[i]->napi);
1806		}
1807	}
1808
1809	del_timer_sync(&adapter->watchdog_timer);
1810	del_timer_sync(&adapter->phy_info_timer);
1811
1812	/* record the stats before reset*/
1813	spin_lock(&adapter->stats64_lock);
1814	igb_update_stats(adapter, &adapter->stats64);
1815	spin_unlock(&adapter->stats64_lock);
1816
1817	adapter->link_speed = 0;
1818	adapter->link_duplex = 0;
1819
1820	if (!pci_channel_offline(adapter->pdev))
1821		igb_reset(adapter);
1822
1823	/* clear VLAN promisc flag so VFTA will be updated if necessary */
1824	adapter->flags &= ~IGB_FLAG_VLAN_PROMISC;
1825
1826	igb_clean_all_tx_rings(adapter);
1827	igb_clean_all_rx_rings(adapter);
1828#ifdef CONFIG_IGB_DCA
1829
1830	/* since we reset the hardware DCA settings were cleared */
1831	igb_setup_dca(adapter);
1832#endif
1833}
1834
1835void igb_reinit_locked(struct igb_adapter *adapter)
1836{
1837	WARN_ON(in_interrupt());
1838	while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
1839		usleep_range(1000, 2000);
1840	igb_down(adapter);
1841	igb_up(adapter);
1842	clear_bit(__IGB_RESETTING, &adapter->state);
1843}
1844
1845/** igb_enable_mas - Media Autosense re-enable after swap
1846 *
1847 * @adapter: adapter struct
1848 **/
1849static void igb_enable_mas(struct igb_adapter *adapter)
1850{
1851	struct e1000_hw *hw = &adapter->hw;
1852	u32 connsw = rd32(E1000_CONNSW);
1853
1854	/* configure for SerDes media detect */
1855	if ((hw->phy.media_type == e1000_media_type_copper) &&
1856	    (!(connsw & E1000_CONNSW_SERDESD))) {
1857		connsw |= E1000_CONNSW_ENRGSRC;
1858		connsw |= E1000_CONNSW_AUTOSENSE_EN;
1859		wr32(E1000_CONNSW, connsw);
1860		wrfl();
1861	}
1862}
1863
1864void igb_reset(struct igb_adapter *adapter)
1865{
1866	struct pci_dev *pdev = adapter->pdev;
1867	struct e1000_hw *hw = &adapter->hw;
1868	struct e1000_mac_info *mac = &hw->mac;
1869	struct e1000_fc_info *fc = &hw->fc;
1870	u32 pba, hwm;
1871
1872	/* Repartition Pba for greater than 9k mtu
1873	 * To take effect CTRL.RST is required.
1874	 */
1875	switch (mac->type) {
1876	case e1000_i350:
1877	case e1000_i354:
1878	case e1000_82580:
1879		pba = rd32(E1000_RXPBS);
1880		pba = igb_rxpbs_adjust_82580(pba);
1881		break;
1882	case e1000_82576:
1883		pba = rd32(E1000_RXPBS);
1884		pba &= E1000_RXPBS_SIZE_MASK_82576;
1885		break;
1886	case e1000_82575:
1887	case e1000_i210:
1888	case e1000_i211:
1889	default:
1890		pba = E1000_PBA_34K;
1891		break;
1892	}
1893
1894	if (mac->type == e1000_82575) {
1895		u32 min_rx_space, min_tx_space, needed_tx_space;
1896
1897		/* write Rx PBA so that hardware can report correct Tx PBA */
1898		wr32(E1000_PBA, pba);
1899
1900		/* To maintain wire speed transmits, the Tx FIFO should be
1901		 * large enough to accommodate two full transmit packets,
1902		 * rounded up to the next 1KB and expressed in KB.  Likewise,
1903		 * the Rx FIFO should be large enough to accommodate at least
1904		 * one full receive packet and is similarly rounded up and
1905		 * expressed in KB.
1906		 */
1907		min_rx_space = DIV_ROUND_UP(MAX_JUMBO_FRAME_SIZE, 1024);
1908
1909		/* The Tx FIFO also stores 16 bytes of information about the Tx
1910		 * but don't include Ethernet FCS because hardware appends it.
1911		 * We only need to round down to the nearest 512 byte block
1912		 * count since the value we care about is 2 frames, not 1.
1913		 */
1914		min_tx_space = adapter->max_frame_size;
1915		min_tx_space += sizeof(union e1000_adv_tx_desc) - ETH_FCS_LEN;
1916		min_tx_space = DIV_ROUND_UP(min_tx_space, 512);
1917
1918		/* upper 16 bits has Tx packet buffer allocation size in KB */
1919		needed_tx_space = min_tx_space - (rd32(E1000_PBA) >> 16);
1920
1921		/* If current Tx allocation is less than the min Tx FIFO size,
1922		 * and the min Tx FIFO size is less than the current Rx FIFO
1923		 * allocation, take space away from current Rx allocation.
1924		 */
1925		if (needed_tx_space < pba) {
1926			pba -= needed_tx_space;
1927
1928			/* if short on Rx space, Rx wins and must trump Tx
1929			 * adjustment
1930			 */
1931			if (pba < min_rx_space)
1932				pba = min_rx_space;
1933		}
1934
1935		/* adjust PBA for jumbo frames */
1936		wr32(E1000_PBA, pba);
1937	}
1938
1939	/* flow control settings
1940	 * The high water mark must be low enough to fit one full frame
1941	 * after transmitting the pause frame.  As such we must have enough
1942	 * space to allow for us to complete our current transmit and then
1943	 * receive the frame that is in progress from the link partner.
1944	 * Set it to:
1945	 * - the full Rx FIFO size minus one full Tx plus one full Rx frame
1946	 */
1947	hwm = (pba << 10) - (adapter->max_frame_size + MAX_JUMBO_FRAME_SIZE);
1948
1949	fc->high_water = hwm & 0xFFFFFFF0;	/* 16-byte granularity */
1950	fc->low_water = fc->high_water - 16;
1951	fc->pause_time = 0xFFFF;
1952	fc->send_xon = 1;
1953	fc->current_mode = fc->requested_mode;
1954
1955	/* disable receive for all VFs and wait one second */
1956	if (adapter->vfs_allocated_count) {
1957		int i;
1958
1959		for (i = 0 ; i < adapter->vfs_allocated_count; i++)
1960			adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
1961
1962		/* ping all the active vfs to let them know we are going down */
1963		igb_ping_all_vfs(adapter);
1964
1965		/* disable transmits and receives */
1966		wr32(E1000_VFRE, 0);
1967		wr32(E1000_VFTE, 0);
1968	}
1969
1970	/* Allow time for pending master requests to run */
1971	hw->mac.ops.reset_hw(hw);
1972	wr32(E1000_WUC, 0);
1973
1974	if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
1975		/* need to resetup here after media swap */
1976		adapter->ei.get_invariants(hw);
1977		adapter->flags &= ~IGB_FLAG_MEDIA_RESET;
1978	}
1979	if ((mac->type == e1000_82575) &&
1980	    (adapter->flags & IGB_FLAG_MAS_ENABLE)) {
1981		igb_enable_mas(adapter);
1982	}
1983	if (hw->mac.ops.init_hw(hw))
1984		dev_err(&pdev->dev, "Hardware Error\n");
1985
1986	/* Flow control settings reset on hardware reset, so guarantee flow
1987	 * control is off when forcing speed.
1988	 */
1989	if (!hw->mac.autoneg)
1990		igb_force_mac_fc(hw);
1991
1992	igb_init_dmac(adapter, pba);
1993#ifdef CONFIG_IGB_HWMON
1994	/* Re-initialize the thermal sensor on i350 devices. */
1995	if (!test_bit(__IGB_DOWN, &adapter->state)) {
1996		if (mac->type == e1000_i350 && hw->bus.func == 0) {
1997			/* If present, re-initialize the external thermal sensor
1998			 * interface.
1999			 */
2000			if (adapter->ets)
2001				mac->ops.init_thermal_sensor_thresh(hw);
2002		}
2003	}
2004#endif
2005	/* Re-establish EEE setting */
2006	if (hw->phy.media_type == e1000_media_type_copper) {
2007		switch (mac->type) {
2008		case e1000_i350:
2009		case e1000_i210:
2010		case e1000_i211:
2011			igb_set_eee_i350(hw, true, true);
2012			break;
2013		case e1000_i354:
2014			igb_set_eee_i354(hw, true, true);
2015			break;
2016		default:
2017			break;
2018		}
2019	}
2020	if (!netif_running(adapter->netdev))
2021		igb_power_down_link(adapter);
2022
2023	igb_update_mng_vlan(adapter);
2024
2025	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
2026	wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
2027
2028	/* Re-enable PTP, where applicable. */
2029	igb_ptp_reset(adapter);
2030
2031	igb_get_phy_info(hw);
2032}
2033
2034static netdev_features_t igb_fix_features(struct net_device *netdev,
2035	netdev_features_t features)
2036{
2037	/* Since there is no support for separate Rx/Tx vlan accel
2038	 * enable/disable make sure Tx flag is always in same state as Rx.
2039	 */
2040	if (features & NETIF_F_HW_VLAN_CTAG_RX)
2041		features |= NETIF_F_HW_VLAN_CTAG_TX;
2042	else
2043		features &= ~NETIF_F_HW_VLAN_CTAG_TX;
2044
2045	return features;
2046}
2047
2048static int igb_set_features(struct net_device *netdev,
2049	netdev_features_t features)
2050{
2051	netdev_features_t changed = netdev->features ^ features;
2052	struct igb_adapter *adapter = netdev_priv(netdev);
2053
2054	if (changed & NETIF_F_HW_VLAN_CTAG_RX)
2055		igb_vlan_mode(netdev, features);
2056
2057	if (!(changed & (NETIF_F_RXALL | NETIF_F_NTUPLE)))
2058		return 0;
2059
2060	netdev->features = features;
2061
2062	if (netif_running(netdev))
2063		igb_reinit_locked(adapter);
2064	else
2065		igb_reset(adapter);
2066
2067	return 0;
2068}
2069
2070static int igb_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
2071			   struct net_device *dev,
2072			   const unsigned char *addr, u16 vid,
2073			   u16 flags)
2074{
2075	/* guarantee we can provide a unique filter for the unicast address */
2076	if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) {
2077		struct igb_adapter *adapter = netdev_priv(dev);
2078		struct e1000_hw *hw = &adapter->hw;
2079		int vfn = adapter->vfs_allocated_count;
2080		int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
2081
2082		if (netdev_uc_count(dev) >= rar_entries)
2083			return -ENOMEM;
2084	}
2085
2086	return ndo_dflt_fdb_add(ndm, tb, dev, addr, vid, flags);
2087}
2088
2089static const struct net_device_ops igb_netdev_ops = {
2090	.ndo_open		= igb_open,
2091	.ndo_stop		= igb_close,
2092	.ndo_start_xmit		= igb_xmit_frame,
2093	.ndo_get_stats64	= igb_get_stats64,
2094	.ndo_set_rx_mode	= igb_set_rx_mode,
2095	.ndo_set_mac_address	= igb_set_mac,
2096	.ndo_change_mtu		= igb_change_mtu,
2097	.ndo_do_ioctl		= igb_ioctl,
2098	.ndo_tx_timeout		= igb_tx_timeout,
2099	.ndo_validate_addr	= eth_validate_addr,
2100	.ndo_vlan_rx_add_vid	= igb_vlan_rx_add_vid,
2101	.ndo_vlan_rx_kill_vid	= igb_vlan_rx_kill_vid,
2102	.ndo_set_vf_mac		= igb_ndo_set_vf_mac,
2103	.ndo_set_vf_vlan	= igb_ndo_set_vf_vlan,
2104	.ndo_set_vf_rate	= igb_ndo_set_vf_bw,
2105	.ndo_set_vf_spoofchk	= igb_ndo_set_vf_spoofchk,
2106	.ndo_get_vf_config	= igb_ndo_get_vf_config,
2107#ifdef CONFIG_NET_POLL_CONTROLLER
2108	.ndo_poll_controller	= igb_netpoll,
2109#endif
2110	.ndo_fix_features	= igb_fix_features,
2111	.ndo_set_features	= igb_set_features,
2112	.ndo_fdb_add		= igb_ndo_fdb_add,
2113	.ndo_features_check	= passthru_features_check,
2114};
2115
2116/**
2117 * igb_set_fw_version - Configure version string for ethtool
2118 * @adapter: adapter struct
2119 **/
2120void igb_set_fw_version(struct igb_adapter *adapter)
2121{
2122	struct e1000_hw *hw = &adapter->hw;
2123	struct e1000_fw_version fw;
2124
2125	igb_get_fw_version(hw, &fw);
2126
2127	switch (hw->mac.type) {
2128	case e1000_i210:
2129	case e1000_i211:
2130		if (!(igb_get_flash_presence_i210(hw))) {
2131			snprintf(adapter->fw_version,
2132				 sizeof(adapter->fw_version),
2133				 "%2d.%2d-%d",
2134				 fw.invm_major, fw.invm_minor,
2135				 fw.invm_img_type);
2136			break;
2137		}
2138		/* fall through */
2139	default:
2140		/* if option is rom valid, display its version too */
2141		if (fw.or_valid) {
2142			snprintf(adapter->fw_version,
2143				 sizeof(adapter->fw_version),
2144				 "%d.%d, 0x%08x, %d.%d.%d",
2145				 fw.eep_major, fw.eep_minor, fw.etrack_id,
2146				 fw.or_major, fw.or_build, fw.or_patch);
2147		/* no option rom */
2148		} else if (fw.etrack_id != 0X0000) {
2149			snprintf(adapter->fw_version,
2150			    sizeof(adapter->fw_version),
2151			    "%d.%d, 0x%08x",
2152			    fw.eep_major, fw.eep_minor, fw.etrack_id);
2153		} else {
2154		snprintf(adapter->fw_version,
2155		    sizeof(adapter->fw_version),
2156		    "%d.%d.%d",
2157		    fw.eep_major, fw.eep_minor, fw.eep_build);
2158		}
2159		break;
2160	}
2161}
2162
2163/**
2164 * igb_init_mas - init Media Autosense feature if enabled in the NVM
2165 *
2166 * @adapter: adapter struct
2167 **/
2168static void igb_init_mas(struct igb_adapter *adapter)
2169{
2170	struct e1000_hw *hw = &adapter->hw;
2171	u16 eeprom_data;
2172
2173	hw->nvm.ops.read(hw, NVM_COMPAT, 1, &eeprom_data);
2174	switch (hw->bus.func) {
2175	case E1000_FUNC_0:
2176		if (eeprom_data & IGB_MAS_ENABLE_0) {
2177			adapter->flags |= IGB_FLAG_MAS_ENABLE;
2178			netdev_info(adapter->netdev,
2179				"MAS: Enabling Media Autosense for port %d\n",
2180				hw->bus.func);
2181		}
2182		break;
2183	case E1000_FUNC_1:
2184		if (eeprom_data & IGB_MAS_ENABLE_1) {
2185			adapter->flags |= IGB_FLAG_MAS_ENABLE;
2186			netdev_info(adapter->netdev,
2187				"MAS: Enabling Media Autosense for port %d\n",
2188				hw->bus.func);
2189		}
2190		break;
2191	case E1000_FUNC_2:
2192		if (eeprom_data & IGB_MAS_ENABLE_2) {
2193			adapter->flags |= IGB_FLAG_MAS_ENABLE;
2194			netdev_info(adapter->netdev,
2195				"MAS: Enabling Media Autosense for port %d\n",
2196				hw->bus.func);
2197		}
2198		break;
2199	case E1000_FUNC_3:
2200		if (eeprom_data & IGB_MAS_ENABLE_3) {
2201			adapter->flags |= IGB_FLAG_MAS_ENABLE;
2202			netdev_info(adapter->netdev,
2203				"MAS: Enabling Media Autosense for port %d\n",
2204				hw->bus.func);
2205		}
2206		break;
2207	default:
2208		/* Shouldn't get here */
2209		netdev_err(adapter->netdev,
2210			"MAS: Invalid port configuration, returning\n");
2211		break;
2212	}
2213}
2214
2215/**
2216 *  igb_init_i2c - Init I2C interface
2217 *  @adapter: pointer to adapter structure
2218 **/
2219static s32 igb_init_i2c(struct igb_adapter *adapter)
2220{
2221	s32 status = 0;
2222
2223	/* I2C interface supported on i350 devices */
2224	if (adapter->hw.mac.type != e1000_i350)
2225		return 0;
2226
2227	/* Initialize the i2c bus which is controlled by the registers.
2228	 * This bus will use the i2c_algo_bit structue that implements
2229	 * the protocol through toggling of the 4 bits in the register.
2230	 */
2231	adapter->i2c_adap.owner = THIS_MODULE;
2232	adapter->i2c_algo = igb_i2c_algo;
2233	adapter->i2c_algo.data = adapter;
2234	adapter->i2c_adap.algo_data = &adapter->i2c_algo;
2235	adapter->i2c_adap.dev.parent = &adapter->pdev->dev;
2236	strlcpy(adapter->i2c_adap.name, "igb BB",
2237		sizeof(adapter->i2c_adap.name));
2238	status = i2c_bit_add_bus(&adapter->i2c_adap);
2239	return status;
2240}
2241
2242/**
2243 *  igb_probe - Device Initialization Routine
2244 *  @pdev: PCI device information struct
2245 *  @ent: entry in igb_pci_tbl
2246 *
2247 *  Returns 0 on success, negative on failure
2248 *
2249 *  igb_probe initializes an adapter identified by a pci_dev structure.
2250 *  The OS initialization, configuring of the adapter private structure,
2251 *  and a hardware reset occur.
2252 **/
2253static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2254{
2255	struct net_device *netdev;
2256	struct igb_adapter *adapter;
2257	struct e1000_hw *hw;
2258	u16 eeprom_data = 0;
2259	s32 ret_val;
2260	static int global_quad_port_a; /* global quad port a indication */
2261	const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
2262	int err, pci_using_dac;
2263	u8 part_str[E1000_PBANUM_LENGTH];
2264
2265	/* Catch broken hardware that put the wrong VF device ID in
2266	 * the PCIe SR-IOV capability.
2267	 */
2268	if (pdev->is_virtfn) {
2269		WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
2270			pci_name(pdev), pdev->vendor, pdev->device);
2271		return -EINVAL;
2272	}
2273
2274	err = pci_enable_device_mem(pdev);
2275	if (err)
2276		return err;
2277
2278	pci_using_dac = 0;
2279	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
2280	if (!err) {
2281		pci_using_dac = 1;
2282	} else {
2283		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
2284		if (err) {
2285			dev_err(&pdev->dev,
2286				"No usable DMA configuration, aborting\n");
2287			goto err_dma;
2288		}
2289	}
2290
2291	err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
2292					   IORESOURCE_MEM),
2293					   igb_driver_name);
2294	if (err)
2295		goto err_pci_reg;
2296
2297	pci_enable_pcie_error_reporting(pdev);
2298
2299	pci_set_master(pdev);
2300	pci_save_state(pdev);
2301
2302	err = -ENOMEM;
2303	netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
2304				   IGB_MAX_TX_QUEUES);
2305	if (!netdev)
2306		goto err_alloc_etherdev;
2307
2308	SET_NETDEV_DEV(netdev, &pdev->dev);
2309
2310	pci_set_drvdata(pdev, netdev);
2311	adapter = netdev_priv(netdev);
2312	adapter->netdev = netdev;
2313	adapter->pdev = pdev;
2314	hw = &adapter->hw;
2315	hw->back = adapter;
2316	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
2317
2318	err = -EIO;
2319	adapter->io_addr = pci_iomap(pdev, 0, 0);
2320	if (!adapter->io_addr)
2321		goto err_ioremap;
2322	/* hw->hw_addr can be altered, we'll use adapter->io_addr for unmap */
2323	hw->hw_addr = adapter->io_addr;
2324
2325	netdev->netdev_ops = &igb_netdev_ops;
2326	igb_set_ethtool_ops(netdev);
2327	netdev->watchdog_timeo = 5 * HZ;
2328
2329	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
2330
2331	netdev->mem_start = pci_resource_start(pdev, 0);
2332	netdev->mem_end = pci_resource_end(pdev, 0);
2333
2334	/* PCI config space info */
2335	hw->vendor_id = pdev->vendor;
2336	hw->device_id = pdev->device;
2337	hw->revision_id = pdev->revision;
2338	hw->subsystem_vendor_id = pdev->subsystem_vendor;
2339	hw->subsystem_device_id = pdev->subsystem_device;
2340
2341	/* Copy the default MAC, PHY and NVM function pointers */
2342	memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
2343	memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
2344	memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
2345	/* Initialize skew-specific constants */
2346	err = ei->get_invariants(hw);
2347	if (err)
2348		goto err_sw_init;
2349
2350	/* setup the private structure */
2351	err = igb_sw_init(adapter);
2352	if (err)
2353		goto err_sw_init;
2354
2355	igb_get_bus_info_pcie(hw);
2356
2357	hw->phy.autoneg_wait_to_complete = false;
2358
2359	/* Copper options */
2360	if (hw->phy.media_type == e1000_media_type_copper) {
2361		hw->phy.mdix = AUTO_ALL_MODES;
2362		hw->phy.disable_polarity_correction = false;
2363		hw->phy.ms_type = e1000_ms_hw_default;
2364	}
2365
2366	if (igb_check_reset_block(hw))
2367		dev_info(&pdev->dev,
2368			"PHY reset is blocked due to SOL/IDER session.\n");
2369
2370	/* features is initialized to 0 in allocation, it might have bits
2371	 * set by igb_sw_init so we should use an or instead of an
2372	 * assignment.
2373	 */
2374	netdev->features |= NETIF_F_SG |
2375			    NETIF_F_TSO |
2376			    NETIF_F_TSO6 |
2377			    NETIF_F_RXHASH |
2378			    NETIF_F_RXCSUM |
2379			    NETIF_F_HW_CSUM |
2380			    NETIF_F_HW_VLAN_CTAG_RX |
2381			    NETIF_F_HW_VLAN_CTAG_TX;
2382
2383	if (hw->mac.type >= e1000_82576)
2384		netdev->features |= NETIF_F_SCTP_CRC;
2385
2386	/* copy netdev features into list of user selectable features */
2387	netdev->hw_features |= netdev->features;
2388	netdev->hw_features |= NETIF_F_RXALL;
2389
2390	if (hw->mac.type >= e1000_i350)
2391		netdev->hw_features |= NETIF_F_NTUPLE;
2392
2393	/* set this bit last since it cannot be part of hw_features */
2394	netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
2395
2396	netdev->vlan_features |= NETIF_F_SG |
2397				 NETIF_F_TSO |
2398				 NETIF_F_TSO6 |
2399				 NETIF_F_HW_CSUM |
2400				 NETIF_F_SCTP_CRC;
2401
2402	netdev->mpls_features |= NETIF_F_HW_CSUM;
2403	netdev->hw_enc_features |= NETIF_F_HW_CSUM;
2404
2405	netdev->priv_flags |= IFF_SUPP_NOFCS;
2406
2407	if (pci_using_dac) {
2408		netdev->features |= NETIF_F_HIGHDMA;
2409		netdev->vlan_features |= NETIF_F_HIGHDMA;
2410	}
2411
2412	netdev->priv_flags |= IFF_UNICAST_FLT;
2413
2414	adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
2415
2416	/* before reading the NVM, reset the controller to put the device in a
2417	 * known good starting state
2418	 */
2419	hw->mac.ops.reset_hw(hw);
2420
2421	/* make sure the NVM is good , i211/i210 parts can have special NVM
2422	 * that doesn't contain a checksum
2423	 */
2424	switch (hw->mac.type) {
2425	case e1000_i210:
2426	case e1000_i211:
2427		if (igb_get_flash_presence_i210(hw)) {
2428			if (hw->nvm.ops.validate(hw) < 0) {
2429				dev_err(&pdev->dev,
2430					"The NVM Checksum Is Not Valid\n");
2431				err = -EIO;
2432				goto err_eeprom;
2433			}
2434		}
2435		break;
2436	default:
2437		if (hw->nvm.ops.validate(hw) < 0) {
2438			dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
2439			err = -EIO;
2440			goto err_eeprom;
2441		}
2442		break;
2443	}
2444
2445	/* copy the MAC address out of the NVM */
2446	if (hw->mac.ops.read_mac_addr(hw))
2447		dev_err(&pdev->dev, "NVM Read Error\n");
2448
2449	memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
2450
2451	if (!is_valid_ether_addr(netdev->dev_addr)) {
2452		dev_err(&pdev->dev, "Invalid MAC Address\n");
2453		err = -EIO;
2454		goto err_eeprom;
2455	}
2456
2457	/* get firmware version for ethtool -i */
2458	igb_set_fw_version(adapter);
2459
2460	/* configure RXPBSIZE and TXPBSIZE */
2461	if (hw->mac.type == e1000_i210) {
2462		wr32(E1000_RXPBS, I210_RXPBSIZE_DEFAULT);
2463		wr32(E1000_TXPBS, I210_TXPBSIZE_DEFAULT);
2464	}
2465
2466	setup_timer(&adapter->watchdog_timer, igb_watchdog,
2467		    (unsigned long) adapter);
2468	setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
2469		    (unsigned long) adapter);
2470
2471	INIT_WORK(&adapter->reset_task, igb_reset_task);
2472	INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
2473
2474	/* Initialize link properties that are user-changeable */
2475	adapter->fc_autoneg = true;
2476	hw->mac.autoneg = true;
2477	hw->phy.autoneg_advertised = 0x2f;
2478
2479	hw->fc.requested_mode = e1000_fc_default;
2480	hw->fc.current_mode = e1000_fc_default;
2481
2482	igb_validate_mdi_setting(hw);
2483
2484	/* By default, support wake on port A */
2485	if (hw->bus.func == 0)
2486		adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
2487
2488	/* Check the NVM for wake support on non-port A ports */
2489	if (hw->mac.type >= e1000_82580)
2490		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
2491				 NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
2492				 &eeprom_data);
2493	else if (hw->bus.func == 1)
2494		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
2495
2496	if (eeprom_data & IGB_EEPROM_APME)
2497		adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
2498
2499	/* now that we have the eeprom settings, apply the special cases where
2500	 * the eeprom may be wrong or the board simply won't support wake on
2501	 * lan on a particular port
2502	 */
2503	switch (pdev->device) {
2504	case E1000_DEV_ID_82575GB_QUAD_COPPER:
2505		adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
2506		break;
2507	case E1000_DEV_ID_82575EB_FIBER_SERDES:
2508	case E1000_DEV_ID_82576_FIBER:
2509	case E1000_DEV_ID_82576_SERDES:
2510		/* Wake events only supported on port A for dual fiber
2511		 * regardless of eeprom setting
2512		 */
2513		if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
2514			adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
2515		break;
2516	case E1000_DEV_ID_82576_QUAD_COPPER:
2517	case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
2518		/* if quad port adapter, disable WoL on all but port A */
2519		if (global_quad_port_a != 0)
2520			adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
2521		else
2522			adapter->flags |= IGB_FLAG_QUAD_PORT_A;
2523		/* Reset for multiple quad port adapters */
2524		if (++global_quad_port_a == 4)
2525			global_quad_port_a = 0;
2526		break;
2527	default:
2528		/* If the device can't wake, don't set software support */
2529		if (!device_can_wakeup(&adapter->pdev->dev))
2530			adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED;
2531	}
2532
2533	/* initialize the wol settings based on the eeprom settings */
2534	if (adapter->flags & IGB_FLAG_WOL_SUPPORTED)
2535		adapter->wol |= E1000_WUFC_MAG;
2536
2537	/* Some vendors want WoL disabled by default, but still supported */
2538	if ((hw->mac.type == e1000_i350) &&
2539	    (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
2540		adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
2541		adapter->wol = 0;
2542	}
2543
2544	/* Some vendors want the ability to Use the EEPROM setting as
2545	 * enable/disable only, and not for capability
2546	 */
2547	if (((hw->mac.type == e1000_i350) ||
2548	     (hw->mac.type == e1000_i354)) &&
2549	    (pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)) {
2550		adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
2551		adapter->wol = 0;
2552	}
2553	if (hw->mac.type == e1000_i350) {
2554		if (((pdev->subsystem_device == 0x5001) ||
2555		     (pdev->subsystem_device == 0x5002)) &&
2556				(hw->bus.func == 0)) {
2557			adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
2558			adapter->wol = 0;
2559		}
2560		if (pdev->subsystem_device == 0x1F52)
2561			adapter->flags |= IGB_FLAG_WOL_SUPPORTED;
2562	}
2563
2564	device_set_wakeup_enable(&adapter->pdev->dev,
2565				 adapter->flags & IGB_FLAG_WOL_SUPPORTED);
2566
2567	/* reset the hardware with the new settings */
2568	igb_reset(adapter);
2569
2570	/* Init the I2C interface */
2571	err = igb_init_i2c(adapter);
2572	if (err) {
2573		dev_err(&pdev->dev, "failed to init i2c interface\n");
2574		goto err_eeprom;
2575	}
2576
2577	/* let the f/w know that the h/w is now under the control of the
2578	 * driver.
2579	 */
2580	igb_get_hw_control(adapter);
2581
2582	strcpy(netdev->name, "eth%d");
2583	err = register_netdev(netdev);
2584	if (err)
2585		goto err_register;
2586
2587	/* carrier off reporting is important to ethtool even BEFORE open */
2588	netif_carrier_off(netdev);
2589
2590#ifdef CONFIG_IGB_DCA
2591	if (dca_add_requester(&pdev->dev) == 0) {
2592		adapter->flags |= IGB_FLAG_DCA_ENABLED;
2593		dev_info(&pdev->dev, "DCA enabled\n");
2594		igb_setup_dca(adapter);
2595	}
2596
2597#endif
2598#ifdef CONFIG_IGB_HWMON
2599	/* Initialize the thermal sensor on i350 devices. */
2600	if (hw->mac.type == e1000_i350 && hw->bus.func == 0) {
2601		u16 ets_word;
2602
2603		/* Read the NVM to determine if this i350 device supports an
2604		 * external thermal sensor.
2605		 */
2606		hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word);
2607		if (ets_word != 0x0000 && ets_word != 0xFFFF)
2608			adapter->ets = true;
2609		else
2610			adapter->ets = false;
2611		if (igb_sysfs_init(adapter))
2612			dev_err(&pdev->dev,
2613				"failed to allocate sysfs resources\n");
2614	} else {
2615		adapter->ets = false;
2616	}
2617#endif
2618	/* Check if Media Autosense is enabled */
2619	adapter->ei = *ei;
2620	if (hw->dev_spec._82575.mas_capable)
2621		igb_init_mas(adapter);
2622
2623	/* do hw tstamp init after resetting */
2624	igb_ptp_init(adapter);
2625
2626	dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
2627	/* print bus type/speed/width info, not applicable to i354 */
2628	if (hw->mac.type != e1000_i354) {
2629		dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
2630			 netdev->name,
2631			 ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
2632			  (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
2633			   "unknown"),
2634			 ((hw->bus.width == e1000_bus_width_pcie_x4) ?
2635			  "Width x4" :
2636			  (hw->bus.width == e1000_bus_width_pcie_x2) ?
2637			  "Width x2" :
2638			  (hw->bus.width == e1000_bus_width_pcie_x1) ?
2639			  "Width x1" : "unknown"), netdev->dev_addr);
2640	}
2641
2642	if ((hw->mac.type >= e1000_i210 ||
2643	     igb_get_flash_presence_i210(hw))) {
2644		ret_val = igb_read_part_string(hw, part_str,
2645					       E1000_PBANUM_LENGTH);
2646	} else {
2647		ret_val = -E1000_ERR_INVM_VALUE_NOT_FOUND;
2648	}
2649
2650	if (ret_val)
2651		strcpy(part_str, "Unknown");
2652	dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
2653	dev_info(&pdev->dev,
2654		"Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
2655		(adapter->flags & IGB_FLAG_HAS_MSIX) ? "MSI-X" :
2656		(adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
2657		adapter->num_rx_queues, adapter->num_tx_queues);
2658	if (hw->phy.media_type == e1000_media_type_copper) {
2659		switch (hw->mac.type) {
2660		case e1000_i350:
2661		case e1000_i210:
2662		case e1000_i211:
2663			/* Enable EEE for internal copper PHY devices */
2664			err = igb_set_eee_i350(hw, true, true);
2665			if ((!err) &&
2666			    (!hw->dev_spec._82575.eee_disable)) {
2667				adapter->eee_advert =
2668					MDIO_EEE_100TX | MDIO_EEE_1000T;
2669				adapter->flags |= IGB_FLAG_EEE;
2670			}
2671			break;
2672		case e1000_i354:
2673			if ((rd32(E1000_CTRL_EXT) &
2674			    E1000_CTRL_EXT_LINK_MODE_SGMII)) {
2675				err = igb_set_eee_i354(hw, true, true);
2676				if ((!err) &&
2677					(!hw->dev_spec._82575.eee_disable)) {
2678					adapter->eee_advert =
2679					   MDIO_EEE_100TX | MDIO_EEE_1000T;
2680					adapter->flags |= IGB_FLAG_EEE;
2681				}
2682			}
2683			break;
2684		default:
2685			break;
2686		}
2687	}
2688	pm_runtime_put_noidle(&pdev->dev);
2689	return 0;
2690
2691err_register:
2692	igb_release_hw_control(adapter);
2693	memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap));
2694err_eeprom:
2695	if (!igb_check_reset_block(hw))
2696		igb_reset_phy(hw);
2697
2698	if (hw->flash_address)
2699		iounmap(hw->flash_address);
2700err_sw_init:
2701	kfree(adapter->shadow_vfta);
2702	igb_clear_interrupt_scheme(adapter);
2703#ifdef CONFIG_PCI_IOV
2704	igb_disable_sriov(pdev);
2705#endif
2706	pci_iounmap(pdev, adapter->io_addr);
2707err_ioremap:
2708	free_netdev(netdev);
2709err_alloc_etherdev:
2710	pci_release_selected_regions(pdev,
2711				     pci_select_bars(pdev, IORESOURCE_MEM));
2712err_pci_reg:
2713err_dma:
2714	pci_disable_device(pdev);
2715	return err;
2716}
2717
2718#ifdef CONFIG_PCI_IOV
2719static int igb_disable_sriov(struct pci_dev *pdev)
2720{
2721	struct net_device *netdev = pci_get_drvdata(pdev);
2722	struct igb_adapter *adapter = netdev_priv(netdev);
2723	struct e1000_hw *hw = &adapter->hw;
2724
2725	/* reclaim resources allocated to VFs */
2726	if (adapter->vf_data) {
2727		/* disable iov and allow time for transactions to clear */
2728		if (pci_vfs_assigned(pdev)) {
2729			dev_warn(&pdev->dev,
2730				 "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
2731			return -EPERM;
2732		} else {
2733			pci_disable_sriov(pdev);
2734			msleep(500);
2735		}
2736
2737		kfree(adapter->vf_data);
2738		adapter->vf_data = NULL;
2739		adapter->vfs_allocated_count = 0;
2740		wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
2741		wrfl();
2742		msleep(100);
2743		dev_info(&pdev->dev, "IOV Disabled\n");
2744
2745		/* Re-enable DMA Coalescing flag since IOV is turned off */
2746		adapter->flags |= IGB_FLAG_DMAC;
2747	}
2748
2749	return 0;
2750}
2751
2752static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs)
2753{
2754	struct net_device *netdev = pci_get_drvdata(pdev);
2755	struct igb_adapter *adapter = netdev_priv(netdev);
2756	int old_vfs = pci_num_vf(pdev);
2757	int err = 0;
2758	int i;
2759
2760	if (!(adapter->flags & IGB_FLAG_HAS_MSIX) || num_vfs > 7) {
2761		err = -EPERM;
2762		goto out;
2763	}
2764	if (!num_vfs)
2765		goto out;
2766
2767	if (old_vfs) {
2768		dev_info(&pdev->dev, "%d pre-allocated VFs found - override max_vfs setting of %d\n",
2769			 old_vfs, max_vfs);
2770		adapter->vfs_allocated_count = old_vfs;
2771	} else
2772		adapter->vfs_allocated_count = num_vfs;
2773
2774	adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
2775				sizeof(struct vf_data_storage), GFP_KERNEL);
2776
2777	/* if allocation failed then we do not support SR-IOV */
2778	if (!adapter->vf_data) {
2779		adapter->vfs_allocated_count = 0;
2780		dev_err(&pdev->dev,
2781			"Unable to allocate memory for VF Data Storage\n");
2782		err = -ENOMEM;
2783		goto out;
2784	}
2785
2786	/* only call pci_enable_sriov() if no VFs are allocated already */
2787	if (!old_vfs) {
2788		err = pci_enable_sriov(pdev, adapter->vfs_allocated_count);
2789		if (err)
2790			goto err_out;
2791	}
2792	dev_info(&pdev->dev, "%d VFs allocated\n",
2793		 adapter->vfs_allocated_count);
2794	for (i = 0; i < adapter->vfs_allocated_count; i++)
2795		igb_vf_configure(adapter, i);
2796
2797	/* DMA Coalescing is not supported in IOV mode. */
2798	adapter->flags &= ~IGB_FLAG_DMAC;
2799	goto out;
2800
2801err_out:
2802	kfree(adapter->vf_data);
2803	adapter->vf_data = NULL;
2804	adapter->vfs_allocated_count = 0;
2805out:
2806	return err;
2807}
2808
2809#endif
2810/**
2811 *  igb_remove_i2c - Cleanup  I2C interface
2812 *  @adapter: pointer to adapter structure
2813 **/
2814static void igb_remove_i2c(struct igb_adapter *adapter)
2815{
2816	/* free the adapter bus structure */
2817	i2c_del_adapter(&adapter->i2c_adap);
2818}
2819
2820/**
2821 *  igb_remove - Device Removal Routine
2822 *  @pdev: PCI device information struct
2823 *
2824 *  igb_remove is called by the PCI subsystem to alert the driver
2825 *  that it should release a PCI device.  The could be caused by a
2826 *  Hot-Plug event, or because the driver is going to be removed from
2827 *  memory.
2828 **/
2829static void igb_remove(struct pci_dev *pdev)
2830{
2831	struct net_device *netdev = pci_get_drvdata(pdev);
2832	struct igb_adapter *adapter = netdev_priv(netdev);
2833	struct e1000_hw *hw = &adapter->hw;
2834
2835	pm_runtime_get_noresume(&pdev->dev);
2836#ifdef CONFIG_IGB_HWMON
2837	igb_sysfs_exit(adapter);
2838#endif
2839	igb_remove_i2c(adapter);
2840	igb_ptp_stop(adapter);
2841	/* The watchdog timer may be rescheduled, so explicitly
2842	 * disable watchdog from being rescheduled.
2843	 */
2844	set_bit(__IGB_DOWN, &adapter->state);
2845	del_timer_sync(&adapter->watchdog_timer);
2846	del_timer_sync(&adapter->phy_info_timer);
2847
2848	cancel_work_sync(&adapter->reset_task);
2849	cancel_work_sync(&adapter->watchdog_task);
2850
2851#ifdef CONFIG_IGB_DCA
2852	if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
2853		dev_info(&pdev->dev, "DCA disabled\n");
2854		dca_remove_requester(&pdev->dev);
2855		adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
2856		wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
2857	}
2858#endif
2859
2860	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
2861	 * would have already happened in close and is redundant.
2862	 */
2863	igb_release_hw_control(adapter);
2864
2865#ifdef CONFIG_PCI_IOV
2866	igb_disable_sriov(pdev);
2867#endif
2868
2869	unregister_netdev(netdev);
2870
2871	igb_clear_interrupt_scheme(adapter);
2872
2873	pci_iounmap(pdev, adapter->io_addr);
2874	if (hw->flash_address)
2875		iounmap(hw->flash_address);
2876	pci_release_selected_regions(pdev,
2877				     pci_select_bars(pdev, IORESOURCE_MEM));
2878
2879	kfree(adapter->shadow_vfta);
2880	free_netdev(netdev);
2881
2882	pci_disable_pcie_error_reporting(pdev);
2883
2884	pci_disable_device(pdev);
2885}
2886
2887/**
2888 *  igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
2889 *  @adapter: board private structure to initialize
2890 *
2891 *  This function initializes the vf specific data storage and then attempts to
2892 *  allocate the VFs.  The reason for ordering it this way is because it is much
2893 *  mor expensive time wise to disable SR-IOV than it is to allocate and free
2894 *  the memory for the VFs.
2895 **/
2896static void igb_probe_vfs(struct igb_adapter *adapter)
2897{
2898#ifdef CONFIG_PCI_IOV
2899	struct pci_dev *pdev = adapter->pdev;
2900	struct e1000_hw *hw = &adapter->hw;
2901
2902	/* Virtualization features not supported on i210 family. */
2903	if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
2904		return;
2905
2906	/* Of the below we really only want the effect of getting
2907	 * IGB_FLAG_HAS_MSIX set (if available), without which
2908	 * igb_enable_sriov() has no effect.
2909	 */
2910	igb_set_interrupt_capability(adapter, true);
2911	igb_reset_interrupt_capability(adapter);
2912
2913	pci_sriov_set_totalvfs(pdev, 7);
2914	igb_enable_sriov(pdev, max_vfs);
2915
2916#endif /* CONFIG_PCI_IOV */
2917}
2918
2919static void igb_init_queue_configuration(struct igb_adapter *adapter)
2920{
2921	struct e1000_hw *hw = &adapter->hw;
2922	u32 max_rss_queues;
2923
2924	/* Determine the maximum number of RSS queues supported. */
2925	switch (hw->mac.type) {
2926	case e1000_i211:
2927		max_rss_queues = IGB_MAX_RX_QUEUES_I211;
2928		break;
2929	case e1000_82575:
2930	case e1000_i210:
2931		max_rss_queues = IGB_MAX_RX_QUEUES_82575;
2932		break;
2933	case e1000_i350:
2934		/* I350 cannot do RSS and SR-IOV at the same time */
2935		if (!!adapter->vfs_allocated_count) {
2936			max_rss_queues = 1;
2937			break;
2938		}
2939		/* fall through */
2940	case e1000_82576:
2941		if (!!adapter->vfs_allocated_count) {
2942			max_rss_queues = 2;
2943			break;
2944		}
2945		/* fall through */
2946	case e1000_82580:
2947	case e1000_i354:
2948	default:
2949		max_rss_queues = IGB_MAX_RX_QUEUES;
2950		break;
2951	}
2952
2953	adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus());
2954
2955	igb_set_flag_queue_pairs(adapter, max_rss_queues);
2956}
2957
2958void igb_set_flag_queue_pairs(struct igb_adapter *adapter,
2959			      const u32 max_rss_queues)
2960{
2961	struct e1000_hw *hw = &adapter->hw;
2962
2963	/* Determine if we need to pair queues. */
2964	switch (hw->mac.type) {
2965	case e1000_82575:
2966	case e1000_i211:
2967		/* Device supports enough interrupts without queue pairing. */
2968		break;
2969	case e1000_82576:
2970	case e1000_82580:
2971	case e1000_i350:
2972	case e1000_i354:
2973	case e1000_i210:
2974	default:
2975		/* If rss_queues > half of max_rss_queues, pair the queues in
2976		 * order to conserve interrupts due to limited supply.
2977		 */
2978		if (adapter->rss_queues > (max_rss_queues / 2))
2979			adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
2980		else
2981			adapter->flags &= ~IGB_FLAG_QUEUE_PAIRS;
2982		break;
2983	}
2984}
2985
2986/**
2987 *  igb_sw_init - Initialize general software structures (struct igb_adapter)
2988 *  @adapter: board private structure to initialize
2989 *
2990 *  igb_sw_init initializes the Adapter private data structure.
2991 *  Fields are initialized based on PCI device information and
2992 *  OS network device settings (MTU size).
2993 **/
2994static int igb_sw_init(struct igb_adapter *adapter)
2995{
2996	struct e1000_hw *hw = &adapter->hw;
2997	struct net_device *netdev = adapter->netdev;
2998	struct pci_dev *pdev = adapter->pdev;
2999
3000	pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
3001
3002	/* set default ring sizes */
3003	adapter->tx_ring_count = IGB_DEFAULT_TXD;
3004	adapter->rx_ring_count = IGB_DEFAULT_RXD;
3005
3006	/* set default ITR values */
3007	adapter->rx_itr_setting = IGB_DEFAULT_ITR;
3008	adapter->tx_itr_setting = IGB_DEFAULT_ITR;
3009
3010	/* set default work limits */
3011	adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
3012
3013	adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
3014				  VLAN_HLEN;
3015	adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
3016
3017	spin_lock_init(&adapter->stats64_lock);
3018#ifdef CONFIG_PCI_IOV
3019	switch (hw->mac.type) {
3020	case e1000_82576:
3021	case e1000_i350:
3022		if (max_vfs > 7) {
3023			dev_warn(&pdev->dev,
3024				 "Maximum of 7 VFs per PF, using max\n");
3025			max_vfs = adapter->vfs_allocated_count = 7;
3026		} else
3027			adapter->vfs_allocated_count = max_vfs;
3028		if (adapter->vfs_allocated_count)
3029			dev_warn(&pdev->dev,
3030				 "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
3031		break;
3032	default:
3033		break;
3034	}
3035#endif /* CONFIG_PCI_IOV */
3036
3037	/* Assume MSI-X interrupts, will be checked during IRQ allocation */
3038	adapter->flags |= IGB_FLAG_HAS_MSIX;
3039
3040	igb_probe_vfs(adapter);
3041
3042	igb_init_queue_configuration(adapter);
3043
3044	/* Setup and initialize a copy of the hw vlan table array */
3045	adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32),
3046				       GFP_ATOMIC);
3047
3048	/* This call may decrease the number of queues */
3049	if (igb_init_interrupt_scheme(adapter, true)) {
3050		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
3051		return -ENOMEM;
3052	}
3053
3054	/* Explicitly disable IRQ since the NIC can be in any state. */
3055	igb_irq_disable(adapter);
3056
3057	if (hw->mac.type >= e1000_i350)
3058		adapter->flags &= ~IGB_FLAG_DMAC;
3059
3060	set_bit(__IGB_DOWN, &adapter->state);
3061	return 0;
3062}
3063
3064/**
3065 *  igb_open - Called when a network interface is made active
3066 *  @netdev: network interface device structure
3067 *
3068 *  Returns 0 on success, negative value on failure
3069 *
3070 *  The open entry point is called when a network interface is made
3071 *  active by the system (IFF_UP).  At this point all resources needed
3072 *  for transmit and receive operations are allocated, the interrupt
3073 *  handler is registered with the OS, the watchdog timer is started,
3074 *  and the stack is notified that the interface is ready.
3075 **/
3076static int __igb_open(struct net_device *netdev, bool resuming)
3077{
3078	struct igb_adapter *adapter = netdev_priv(netdev);
3079	struct e1000_hw *hw = &adapter->hw;
3080	struct pci_dev *pdev = adapter->pdev;
3081	int err;
3082	int i;
3083
3084	/* disallow open during test */
3085	if (test_bit(__IGB_TESTING, &adapter->state)) {
3086		WARN_ON(resuming);
3087		return -EBUSY;
3088	}
3089
3090	if (!resuming)
3091		pm_runtime_get_sync(&pdev->dev);
3092
3093	netif_carrier_off(netdev);
3094
3095	/* allocate transmit descriptors */
3096	err = igb_setup_all_tx_resources(adapter);
3097	if (err)
3098		goto err_setup_tx;
3099
3100	/* allocate receive descriptors */
3101	err = igb_setup_all_rx_resources(adapter);
3102	if (err)
3103		goto err_setup_rx;
3104
3105	igb_power_up_link(adapter);
3106
3107	/* before we allocate an interrupt, we must be ready to handle it.
3108	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
3109	 * as soon as we call pci_request_irq, so we have to setup our
3110	 * clean_rx handler before we do so.
3111	 */
3112	igb_configure(adapter);
3113
3114	err = igb_request_irq(adapter);
3115	if (err)
3116		goto err_req_irq;
3117
3118	/* Notify the stack of the actual queue counts. */
3119	err = netif_set_real_num_tx_queues(adapter->netdev,
3120					   adapter->num_tx_queues);
3121	if (err)
3122		goto err_set_queues;
3123
3124	err = netif_set_real_num_rx_queues(adapter->netdev,
3125					   adapter->num_rx_queues);
3126	if (err)
3127		goto err_set_queues;
3128
3129	/* From here on the code is the same as igb_up() */
3130	clear_bit(__IGB_DOWN, &adapter->state);
3131
3132	for (i = 0; i < adapter->num_q_vectors; i++)
3133		napi_enable(&(adapter->q_vector[i]->napi));
3134
3135	/* Clear any pending interrupts. */
3136	rd32(E1000_ICR);
3137
3138	igb_irq_enable(adapter);
3139
3140	/* notify VFs that reset has been completed */
3141	if (adapter->vfs_allocated_count) {
3142		u32 reg_data = rd32(E1000_CTRL_EXT);
3143
3144		reg_data |= E1000_CTRL_EXT_PFRSTD;
3145		wr32(E1000_CTRL_EXT, reg_data);
3146	}
3147
3148	netif_tx_start_all_queues(netdev);
3149
3150	if (!resuming)
3151		pm_runtime_put(&pdev->dev);
3152
3153	/* start the watchdog. */
3154	hw->mac.get_link_status = 1;
3155	schedule_work(&adapter->watchdog_task);
3156
3157	return 0;
3158
3159err_set_queues:
3160	igb_free_irq(adapter);
3161err_req_irq:
3162	igb_release_hw_control(adapter);
3163	igb_power_down_link(adapter);
3164	igb_free_all_rx_resources(adapter);
3165err_setup_rx:
3166	igb_free_all_tx_resources(adapter);
3167err_setup_tx:
3168	igb_reset(adapter);
3169	if (!resuming)
3170		pm_runtime_put(&pdev->dev);
3171
3172	return err;
3173}
3174
3175int igb_open(struct net_device *netdev)
3176{
3177	return __igb_open(netdev, false);
3178}
3179
3180/**
3181 *  igb_close - Disables a network interface
3182 *  @netdev: network interface device structure
3183 *
3184 *  Returns 0, this is not allowed to fail
3185 *
3186 *  The close entry point is called when an interface is de-activated
3187 *  by the OS.  The hardware is still under the driver's control, but
3188 *  needs to be disabled.  A global MAC reset is issued to stop the
3189 *  hardware, and all transmit and receive resources are freed.
3190 **/
3191static int __igb_close(struct net_device *netdev, bool suspending)
3192{
3193	struct igb_adapter *adapter = netdev_priv(netdev);
3194	struct pci_dev *pdev = adapter->pdev;
3195
3196	WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
3197
3198	if (!suspending)
3199		pm_runtime_get_sync(&pdev->dev);
3200
3201	igb_down(adapter);
3202	igb_free_irq(adapter);
3203
3204	igb_free_all_tx_resources(adapter);
3205	igb_free_all_rx_resources(adapter);
3206
3207	if (!suspending)
3208		pm_runtime_put_sync(&pdev->dev);
3209	return 0;
3210}
3211
3212int igb_close(struct net_device *netdev)
3213{
3214	return __igb_close(netdev, false);
3215}
3216
3217/**
3218 *  igb_setup_tx_resources - allocate Tx resources (Descriptors)
3219 *  @tx_ring: tx descriptor ring (for a specific queue) to setup
3220 *
3221 *  Return 0 on success, negative on failure
3222 **/
3223int igb_setup_tx_resources(struct igb_ring *tx_ring)
3224{
3225	struct device *dev = tx_ring->dev;
3226	int size;
3227
3228	size = sizeof(struct igb_tx_buffer) * tx_ring->count;
3229
3230	tx_ring->tx_buffer_info = vzalloc(size);
3231	if (!tx_ring->tx_buffer_info)
3232		goto err;
3233
3234	/* round up to nearest 4K */
3235	tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
3236	tx_ring->size = ALIGN(tx_ring->size, 4096);
3237
3238	tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
3239					   &tx_ring->dma, GFP_KERNEL);
3240	if (!tx_ring->desc)
3241		goto err;
3242
3243	tx_ring->next_to_use = 0;
3244	tx_ring->next_to_clean = 0;
3245
3246	return 0;
3247
3248err:
3249	vfree(tx_ring->tx_buffer_info);
3250	tx_ring->tx_buffer_info = NULL;
3251	dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
3252	return -ENOMEM;
3253}
3254
3255/**
3256 *  igb_setup_all_tx_resources - wrapper to allocate Tx resources
3257 *				 (Descriptors) for all queues
3258 *  @adapter: board private structure
3259 *
3260 *  Return 0 on success, negative on failure
3261 **/
3262static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
3263{
3264	struct pci_dev *pdev = adapter->pdev;
3265	int i, err = 0;
3266
3267	for (i = 0; i < adapter->num_tx_queues; i++) {
3268		err = igb_setup_tx_resources(adapter->tx_ring[i]);
3269		if (err) {
3270			dev_err(&pdev->dev,
3271				"Allocation for Tx Queue %u failed\n", i);
3272			for (i--; i >= 0; i--)
3273				igb_free_tx_resources(adapter->tx_ring[i]);
3274			break;
3275		}
3276	}
3277
3278	return err;
3279}
3280
3281/**
3282 *  igb_setup_tctl - configure the transmit control registers
3283 *  @adapter: Board private structure
3284 **/
3285void igb_setup_tctl(struct igb_adapter *adapter)
3286{
3287	struct e1000_hw *hw = &adapter->hw;
3288	u32 tctl;
3289
3290	/* disable queue 0 which is enabled by default on 82575 and 82576 */
3291	wr32(E1000_TXDCTL(0), 0);
3292
3293	/* Program the Transmit Control Register */
3294	tctl = rd32(E1000_TCTL);
3295	tctl &= ~E1000_TCTL_CT;
3296	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
3297		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
3298
3299	igb_config_collision_dist(hw);
3300
3301	/* Enable transmits */
3302	tctl |= E1000_TCTL_EN;
3303
3304	wr32(E1000_TCTL, tctl);
3305}
3306
3307/**
3308 *  igb_configure_tx_ring - Configure transmit ring after Reset
3309 *  @adapter: board private structure
3310 *  @ring: tx ring to configure
3311 *
3312 *  Configure a transmit ring after a reset.
3313 **/
3314void igb_configure_tx_ring(struct igb_adapter *adapter,
3315			   struct igb_ring *ring)
3316{
3317	struct e1000_hw *hw = &adapter->hw;
3318	u32 txdctl = 0;
3319	u64 tdba = ring->dma;
3320	int reg_idx = ring->reg_idx;
3321
3322	/* disable the queue */
3323	wr32(E1000_TXDCTL(reg_idx), 0);
3324	wrfl();
3325	mdelay(10);
3326
3327	wr32(E1000_TDLEN(reg_idx),
3328	     ring->count * sizeof(union e1000_adv_tx_desc));
3329	wr32(E1000_TDBAL(reg_idx),
3330	     tdba & 0x00000000ffffffffULL);
3331	wr32(E1000_TDBAH(reg_idx), tdba >> 32);
3332
3333	ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
3334	wr32(E1000_TDH(reg_idx), 0);
3335	writel(0, ring->tail);
3336
3337	txdctl |= IGB_TX_PTHRESH;
3338	txdctl |= IGB_TX_HTHRESH << 8;
3339	txdctl |= IGB_TX_WTHRESH << 16;
3340
3341	txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
3342	wr32(E1000_TXDCTL(reg_idx), txdctl);
3343}
3344
3345/**
3346 *  igb_configure_tx - Configure transmit Unit after Reset
3347 *  @adapter: board private structure
3348 *
3349 *  Configure the Tx unit of the MAC after a reset.
3350 **/
3351static void igb_configure_tx(struct igb_adapter *adapter)
3352{
3353	int i;
3354
3355	for (i = 0; i < adapter->num_tx_queues; i++)
3356		igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
3357}
3358
3359/**
3360 *  igb_setup_rx_resources - allocate Rx resources (Descriptors)
3361 *  @rx_ring: Rx descriptor ring (for a specific queue) to setup
3362 *
3363 *  Returns 0 on success, negative on failure
3364 **/
3365int igb_setup_rx_resources(struct igb_ring *rx_ring)
3366{
3367	struct device *dev = rx_ring->dev;
3368	int size;
3369
3370	size = sizeof(struct igb_rx_buffer) * rx_ring->count;
3371
3372	rx_ring->rx_buffer_info = vzalloc(size);
3373	if (!rx_ring->rx_buffer_info)
3374		goto err;
3375
3376	/* Round up to nearest 4K */
3377	rx_ring->size = rx_ring->count * sizeof(union e1000_adv_rx_desc);
3378	rx_ring->size = ALIGN(rx_ring->size, 4096);
3379
3380	rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
3381					   &rx_ring->dma, GFP_KERNEL);
3382	if (!rx_ring->desc)
3383		goto err;
3384
3385	rx_ring->next_to_alloc = 0;
3386	rx_ring->next_to_clean = 0;
3387	rx_ring->next_to_use = 0;
3388
3389	return 0;
3390
3391err:
3392	vfree(rx_ring->rx_buffer_info);
3393	rx_ring->rx_buffer_info = NULL;
3394	dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
3395	return -ENOMEM;
3396}
3397
3398/**
3399 *  igb_setup_all_rx_resources - wrapper to allocate Rx resources
3400 *				 (Descriptors) for all queues
3401 *  @adapter: board private structure
3402 *
3403 *  Return 0 on success, negative on failure
3404 **/
3405static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
3406{
3407	struct pci_dev *pdev = adapter->pdev;
3408	int i, err = 0;
3409
3410	for (i = 0; i < adapter->num_rx_queues; i++) {
3411		err = igb_setup_rx_resources(adapter->rx_ring[i]);
3412		if (err) {
3413			dev_err(&pdev->dev,
3414				"Allocation for Rx Queue %u failed\n", i);
3415			for (i--; i >= 0; i--)
3416				igb_free_rx_resources(adapter->rx_ring[i]);
3417			break;
3418		}
3419	}
3420
3421	return err;
3422}
3423
3424/**
3425 *  igb_setup_mrqc - configure the multiple receive queue control registers
3426 *  @adapter: Board private structure
3427 **/
3428static void igb_setup_mrqc(struct igb_adapter *adapter)
3429{
3430	struct e1000_hw *hw = &adapter->hw;
3431	u32 mrqc, rxcsum;
3432	u32 j, num_rx_queues;
3433	u32 rss_key[10];
3434
3435	netdev_rss_key_fill(rss_key, sizeof(rss_key));
3436	for (j = 0; j < 10; j++)
3437		wr32(E1000_RSSRK(j), rss_key[j]);
3438
3439	num_rx_queues = adapter->rss_queues;
3440
3441	switch (hw->mac.type) {
3442	case e1000_82576:
3443		/* 82576 supports 2 RSS queues for SR-IOV */
3444		if (adapter->vfs_allocated_count)
3445			num_rx_queues = 2;
3446		break;
3447	default:
3448		break;
3449	}
3450
3451	if (adapter->rss_indir_tbl_init != num_rx_queues) {
3452		for (j = 0; j < IGB_RETA_SIZE; j++)
3453			adapter->rss_indir_tbl[j] =
3454			(j * num_rx_queues) / IGB_RETA_SIZE;
3455		adapter->rss_indir_tbl_init = num_rx_queues;
3456	}
3457	igb_write_rss_indir_tbl(adapter);
3458
3459	/* Disable raw packet checksumming so that RSS hash is placed in
3460	 * descriptor on writeback.  No need to enable TCP/UDP/IP checksum
3461	 * offloads as they are enabled by default
3462	 */
3463	rxcsum = rd32(E1000_RXCSUM);
3464	rxcsum |= E1000_RXCSUM_PCSD;
3465
3466	if (adapter->hw.mac.type >= e1000_82576)
3467		/* Enable Receive Checksum Offload for SCTP */
3468		rxcsum |= E1000_RXCSUM_CRCOFL;
3469
3470	/* Don't need to set TUOFL or IPOFL, they default to 1 */
3471	wr32(E1000_RXCSUM, rxcsum);
3472
3473	/* Generate RSS hash based on packet types, TCP/UDP
3474	 * port numbers and/or IPv4/v6 src and dst addresses
3475	 */
3476	mrqc = E1000_MRQC_RSS_FIELD_IPV4 |
3477	       E1000_MRQC_RSS_FIELD_IPV4_TCP |
3478	       E1000_MRQC_RSS_FIELD_IPV6 |
3479	       E1000_MRQC_RSS_FIELD_IPV6_TCP |
3480	       E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
3481
3482	if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP)
3483		mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP;
3484	if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP)
3485		mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP;
3486
3487	/* If VMDq is enabled then we set the appropriate mode for that, else
3488	 * we default to RSS so that an RSS hash is calculated per packet even
3489	 * if we are only using one queue
3490	 */
3491	if (adapter->vfs_allocated_count) {
3492		if (hw->mac.type > e1000_82575) {
3493			/* Set the default pool for the PF's first queue */
3494			u32 vtctl = rd32(E1000_VT_CTL);
3495
3496			vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
3497				   E1000_VT_CTL_DISABLE_DEF_POOL);
3498			vtctl |= adapter->vfs_allocated_count <<
3499				E1000_VT_CTL_DEFAULT_POOL_SHIFT;
3500			wr32(E1000_VT_CTL, vtctl);
3501		}
3502		if (adapter->rss_queues > 1)
3503			mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_MQ;
3504		else
3505			mrqc |= E1000_MRQC_ENABLE_VMDQ;
3506	} else {
3507		if (hw->mac.type != e1000_i211)
3508			mrqc |= E1000_MRQC_ENABLE_RSS_MQ;
3509	}
3510	igb_vmm_control(adapter);
3511
3512	wr32(E1000_MRQC, mrqc);
3513}
3514
3515/**
3516 *  igb_setup_rctl - configure the receive control registers
3517 *  @adapter: Board private structure
3518 **/
3519void igb_setup_rctl(struct igb_adapter *adapter)
3520{
3521	struct e1000_hw *hw = &adapter->hw;
3522	u32 rctl;
3523
3524	rctl = rd32(E1000_RCTL);
3525
3526	rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
3527	rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
3528
3529	rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
3530		(hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
3531
3532	/* enable stripping of CRC. It's unlikely this will break BMC
3533	 * redirection as it did with e1000. Newer features require
3534	 * that the HW strips the CRC.
3535	 */
3536	rctl |= E1000_RCTL_SECRC;
3537
3538	/* disable store bad packets and clear size bits. */
3539	rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
3540
3541	/* enable LPE to allow for reception of jumbo frames */
3542	rctl |= E1000_RCTL_LPE;
3543
3544	/* disable queue 0 to prevent tail write w/o re-config */
3545	wr32(E1000_RXDCTL(0), 0);
3546
3547	/* Attention!!!  For SR-IOV PF driver operations you must enable
3548	 * queue drop for all VF and PF queues to prevent head of line blocking
3549	 * if an un-trusted VF does not provide descriptors to hardware.
3550	 */
3551	if (adapter->vfs_allocated_count) {
3552		/* set all queue drop enable bits */
3553		wr32(E1000_QDE, ALL_QUEUES);
3554	}
3555
3556	/* This is useful for sniffing bad packets. */
3557	if (adapter->netdev->features & NETIF_F_RXALL) {
3558		/* UPE and MPE will be handled by normal PROMISC logic
3559		 * in e1000e_set_rx_mode
3560		 */
3561		rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
3562			 E1000_RCTL_BAM | /* RX All Bcast Pkts */
3563			 E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
3564
3565		rctl &= ~(E1000_RCTL_DPF | /* Allow filtered pause */
3566			  E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
3567		/* Do not mess with E1000_CTRL_VME, it affects transmit as well,
3568		 * and that breaks VLANs.
3569		 */
3570	}
3571
3572	wr32(E1000_RCTL, rctl);
3573}
3574
3575static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
3576				   int vfn)
3577{
3578	struct e1000_hw *hw = &adapter->hw;
3579	u32 vmolr;
3580
3581	if (size > MAX_JUMBO_FRAME_SIZE)
3582		size = MAX_JUMBO_FRAME_SIZE;
3583
3584	vmolr = rd32(E1000_VMOLR(vfn));
3585	vmolr &= ~E1000_VMOLR_RLPML_MASK;
3586	vmolr |= size | E1000_VMOLR_LPE;
3587	wr32(E1000_VMOLR(vfn), vmolr);
3588
3589	return 0;
3590}
3591
3592static inline void igb_set_vf_vlan_strip(struct igb_adapter *adapter,
3593					 int vfn, bool enable)
3594{
3595	struct e1000_hw *hw = &adapter->hw;
3596	u32 val, reg;
3597
3598	if (hw->mac.type < e1000_82576)
3599		return;
3600
3601	if (hw->mac.type == e1000_i350)
3602		reg = E1000_DVMOLR(vfn);
3603	else
3604		reg = E1000_VMOLR(vfn);
3605
3606	val = rd32(reg);
3607	if (enable)
3608		val |= E1000_VMOLR_STRVLAN;
3609	else
3610		val &= ~(E1000_VMOLR_STRVLAN);
3611	wr32(reg, val);
3612}
3613
3614static inline void igb_set_vmolr(struct igb_adapter *adapter,
3615				 int vfn, bool aupe)
3616{
3617	struct e1000_hw *hw = &adapter->hw;
3618	u32 vmolr;
3619
3620	/* This register exists only on 82576 and newer so if we are older then
3621	 * we should exit and do nothing
3622	 */
3623	if (hw->mac.type < e1000_82576)
3624		return;
3625
3626	vmolr = rd32(E1000_VMOLR(vfn));
3627	if (aupe)
3628		vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */
3629	else
3630		vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
3631
3632	/* clear all bits that might not be set */
3633	vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
3634
3635	if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
3636		vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
3637	/* for VMDq only allow the VFs and pool 0 to accept broadcast and
3638	 * multicast packets
3639	 */
3640	if (vfn <= adapter->vfs_allocated_count)
3641		vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */
3642
3643	wr32(E1000_VMOLR(vfn), vmolr);
3644}
3645
3646/**
3647 *  igb_configure_rx_ring - Configure a receive ring after Reset
3648 *  @adapter: board private structure
3649 *  @ring: receive ring to be configured
3650 *
3651 *  Configure the Rx unit of the MAC after a reset.
3652 **/
3653void igb_configure_rx_ring(struct igb_adapter *adapter,
3654			   struct igb_ring *ring)
3655{
3656	struct e1000_hw *hw = &adapter->hw;
3657	u64 rdba = ring->dma;
3658	int reg_idx = ring->reg_idx;
3659	u32 srrctl = 0, rxdctl = 0;
3660
3661	/* disable the queue */
3662	wr32(E1000_RXDCTL(reg_idx), 0);
3663
3664	/* Set DMA base address registers */
3665	wr32(E1000_RDBAL(reg_idx),
3666	     rdba & 0x00000000ffffffffULL);
3667	wr32(E1000_RDBAH(reg_idx), rdba >> 32);
3668	wr32(E1000_RDLEN(reg_idx),
3669	     ring->count * sizeof(union e1000_adv_rx_desc));
3670
3671	/* initialize head and tail */
3672	ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
3673	wr32(E1000_RDH(reg_idx), 0);
3674	writel(0, ring->tail);
3675
3676	/* set descriptor configuration */
3677	srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
3678	srrctl |= IGB_RX_BUFSZ >> E1000_SRRCTL_BSIZEPKT_SHIFT;
3679	srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
3680	if (hw->mac.type >= e1000_82580)
3681		srrctl |= E1000_SRRCTL_TIMESTAMP;
3682	/* Only set Drop Enable if we are supporting multiple queues */
3683	if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
3684		srrctl |= E1000_SRRCTL_DROP_EN;
3685
3686	wr32(E1000_SRRCTL(reg_idx), srrctl);
3687
3688	/* set filtering for VMDQ pools */
3689	igb_set_vmolr(adapter, reg_idx & 0x7, true);
3690
3691	rxdctl |= IGB_RX_PTHRESH;
3692	rxdctl |= IGB_RX_HTHRESH << 8;
3693	rxdctl |= IGB_RX_WTHRESH << 16;
3694
3695	/* enable receive descriptor fetching */
3696	rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
3697	wr32(E1000_RXDCTL(reg_idx), rxdctl);
3698}
3699
3700/**
3701 *  igb_configure_rx - Configure receive Unit after Reset
3702 *  @adapter: board private structure
3703 *
3704 *  Configure the Rx unit of the MAC after a reset.
3705 **/
3706static void igb_configure_rx(struct igb_adapter *adapter)
3707{
3708	int i;
3709
3710	/* set the correct pool for the PF default MAC address in entry 0 */
3711	igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
3712			 adapter->vfs_allocated_count);
3713
3714	/* Setup the HW Rx Head and Tail Descriptor Pointers and
3715	 * the Base and Length of the Rx Descriptor Ring
3716	 */
3717	for (i = 0; i < adapter->num_rx_queues; i++)
3718		igb_configure_rx_ring(adapter, adapter->rx_ring[i]);
3719}
3720
3721/**
3722 *  igb_free_tx_resources - Free Tx Resources per Queue
3723 *  @tx_ring: Tx descriptor ring for a specific queue
3724 *
3725 *  Free all transmit software resources
3726 **/
3727void igb_free_tx_resources(struct igb_ring *tx_ring)
3728{
3729	igb_clean_tx_ring(tx_ring);
3730
3731	vfree(tx_ring->tx_buffer_info);
3732	tx_ring->tx_buffer_info = NULL;
3733
3734	/* if not set, then don't free */
3735	if (!tx_ring->desc)
3736		return;
3737
3738	dma_free_coherent(tx_ring->dev, tx_ring->size,
3739			  tx_ring->desc, tx_ring->dma);
3740
3741	tx_ring->desc = NULL;
3742}
3743
3744/**
3745 *  igb_free_all_tx_resources - Free Tx Resources for All Queues
3746 *  @adapter: board private structure
3747 *
3748 *  Free all transmit software resources
3749 **/
3750static void igb_free_all_tx_resources(struct igb_adapter *adapter)
3751{
3752	int i;
3753
3754	for (i = 0; i < adapter->num_tx_queues; i++)
3755		if (adapter->tx_ring[i])
3756			igb_free_tx_resources(adapter->tx_ring[i]);
3757}
3758
3759void igb_unmap_and_free_tx_resource(struct igb_ring *ring,
3760				    struct igb_tx_buffer *tx_buffer)
3761{
3762	if (tx_buffer->skb) {
3763		dev_kfree_skb_any(tx_buffer->skb);
3764		if (dma_unmap_len(tx_buffer, len))
3765			dma_unmap_single(ring->dev,
3766					 dma_unmap_addr(tx_buffer, dma),
3767					 dma_unmap_len(tx_buffer, len),
3768					 DMA_TO_DEVICE);
3769	} else if (dma_unmap_len(tx_buffer, len)) {
3770		dma_unmap_page(ring->dev,
3771			       dma_unmap_addr(tx_buffer, dma),
3772			       dma_unmap_len(tx_buffer, len),
3773			       DMA_TO_DEVICE);
3774	}
3775	tx_buffer->next_to_watch = NULL;
3776	tx_buffer->skb = NULL;
3777	dma_unmap_len_set(tx_buffer, len, 0);
3778	/* buffer_info must be completely set up in the transmit path */
3779}
3780
3781/**
3782 *  igb_clean_tx_ring - Free Tx Buffers
3783 *  @tx_ring: ring to be cleaned
3784 **/
3785static void igb_clean_tx_ring(struct igb_ring *tx_ring)
3786{
3787	struct igb_tx_buffer *buffer_info;
3788	unsigned long size;
3789	u16 i;
3790
3791	if (!tx_ring->tx_buffer_info)
3792		return;
3793	/* Free all the Tx ring sk_buffs */
3794
3795	for (i = 0; i < tx_ring->count; i++) {
3796		buffer_info = &tx_ring->tx_buffer_info[i];
3797		igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
3798	}
3799
3800	netdev_tx_reset_queue(txring_txq(tx_ring));
3801
3802	size = sizeof(struct igb_tx_buffer) * tx_ring->count;
3803	memset(tx_ring->tx_buffer_info, 0, size);
3804
3805	/* Zero out the descriptor ring */
3806	memset(tx_ring->desc, 0, tx_ring->size);
3807
3808	tx_ring->next_to_use = 0;
3809	tx_ring->next_to_clean = 0;
3810}
3811
3812/**
3813 *  igb_clean_all_tx_rings - Free Tx Buffers for all queues
3814 *  @adapter: board private structure
3815 **/
3816static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
3817{
3818	int i;
3819
3820	for (i = 0; i < adapter->num_tx_queues; i++)
3821		if (adapter->tx_ring[i])
3822			igb_clean_tx_ring(adapter->tx_ring[i]);
3823}
3824
3825/**
3826 *  igb_free_rx_resources - Free Rx Resources
3827 *  @rx_ring: ring to clean the resources from
3828 *
3829 *  Free all receive software resources
3830 **/
3831void igb_free_rx_resources(struct igb_ring *rx_ring)
3832{
3833	igb_clean_rx_ring(rx_ring);
3834
3835	vfree(rx_ring->rx_buffer_info);
3836	rx_ring->rx_buffer_info = NULL;
3837
3838	/* if not set, then don't free */
3839	if (!rx_ring->desc)
3840		return;
3841
3842	dma_free_coherent(rx_ring->dev, rx_ring->size,
3843			  rx_ring->desc, rx_ring->dma);
3844
3845	rx_ring->desc = NULL;
3846}
3847
3848/**
3849 *  igb_free_all_rx_resources - Free Rx Resources for All Queues
3850 *  @adapter: board private structure
3851 *
3852 *  Free all receive software resources
3853 **/
3854static void igb_free_all_rx_resources(struct igb_adapter *adapter)
3855{
3856	int i;
3857
3858	for (i = 0; i < adapter->num_rx_queues; i++)
3859		if (adapter->rx_ring[i])
3860			igb_free_rx_resources(adapter->rx_ring[i]);
3861}
3862
3863/**
3864 *  igb_clean_rx_ring - Free Rx Buffers per Queue
3865 *  @rx_ring: ring to free buffers from
3866 **/
3867static void igb_clean_rx_ring(struct igb_ring *rx_ring)
3868{
3869	unsigned long size;
3870	u16 i;
3871
3872	if (rx_ring->skb)
3873		dev_kfree_skb(rx_ring->skb);
3874	rx_ring->skb = NULL;
3875
3876	if (!rx_ring->rx_buffer_info)
3877		return;
3878
3879	/* Free all the Rx ring sk_buffs */
3880	for (i = 0; i < rx_ring->count; i++) {
3881		struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i];
3882
3883		if (!buffer_info->page)
3884			continue;
3885
3886		dma_unmap_page(rx_ring->dev,
3887			       buffer_info->dma,
3888			       PAGE_SIZE,
3889			       DMA_FROM_DEVICE);
3890		__free_page(buffer_info->page);
3891
3892		buffer_info->page = NULL;
3893	}
3894
3895	size = sizeof(struct igb_rx_buffer) * rx_ring->count;
3896	memset(rx_ring->rx_buffer_info, 0, size);
3897
3898	/* Zero out the descriptor ring */
3899	memset(rx_ring->desc, 0, rx_ring->size);
3900
3901	rx_ring->next_to_alloc = 0;
3902	rx_ring->next_to_clean = 0;
3903	rx_ring->next_to_use = 0;
3904}
3905
3906/**
3907 *  igb_clean_all_rx_rings - Free Rx Buffers for all queues
3908 *  @adapter: board private structure
3909 **/
3910static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
3911{
3912	int i;
3913
3914	for (i = 0; i < adapter->num_rx_queues; i++)
3915		if (adapter->rx_ring[i])
3916			igb_clean_rx_ring(adapter->rx_ring[i]);
3917}
3918
3919/**
3920 *  igb_set_mac - Change the Ethernet Address of the NIC
3921 *  @netdev: network interface device structure
3922 *  @p: pointer to an address structure
3923 *
3924 *  Returns 0 on success, negative on failure
3925 **/
3926static int igb_set_mac(struct net_device *netdev, void *p)
3927{
3928	struct igb_adapter *adapter = netdev_priv(netdev);
3929	struct e1000_hw *hw = &adapter->hw;
3930	struct sockaddr *addr = p;
3931
3932	if (!is_valid_ether_addr(addr->sa_data))
3933		return -EADDRNOTAVAIL;
3934
3935	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
3936	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
3937
3938	/* set the correct pool for the new PF MAC address in entry 0 */
3939	igb_rar_set_qsel(adapter, hw->mac.addr, 0,
3940			 adapter->vfs_allocated_count);
3941
3942	return 0;
3943}
3944
3945/**
3946 *  igb_write_mc_addr_list - write multicast addresses to MTA
3947 *  @netdev: network interface device structure
3948 *
3949 *  Writes multicast address list to the MTA hash table.
3950 *  Returns: -ENOMEM on failure
3951 *           0 on no addresses written
3952 *           X on writing X addresses to MTA
3953 **/
3954static int igb_write_mc_addr_list(struct net_device *netdev)
3955{
3956	struct igb_adapter *adapter = netdev_priv(netdev);
3957	struct e1000_hw *hw = &adapter->hw;
3958	struct netdev_hw_addr *ha;
3959	u8  *mta_list;
3960	int i;
3961
3962	if (netdev_mc_empty(netdev)) {
3963		/* nothing to program, so clear mc list */
3964		igb_update_mc_addr_list(hw, NULL, 0);
3965		igb_restore_vf_multicasts(adapter);
3966		return 0;
3967	}
3968
3969	mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
3970	if (!mta_list)
3971		return -ENOMEM;
3972
3973	/* The shared function expects a packed array of only addresses. */
3974	i = 0;
3975	netdev_for_each_mc_addr(ha, netdev)
3976		memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
3977
3978	igb_update_mc_addr_list(hw, mta_list, i);
3979	kfree(mta_list);
3980
3981	return netdev_mc_count(netdev);
3982}
3983
3984/**
3985 *  igb_write_uc_addr_list - write unicast addresses to RAR table
3986 *  @netdev: network interface device structure
3987 *
3988 *  Writes unicast address list to the RAR table.
3989 *  Returns: -ENOMEM on failure/insufficient address space
3990 *           0 on no addresses written
3991 *           X on writing X addresses to the RAR table
3992 **/
3993static int igb_write_uc_addr_list(struct net_device *netdev)
3994{
3995	struct igb_adapter *adapter = netdev_priv(netdev);
3996	struct e1000_hw *hw = &adapter->hw;
3997	unsigned int vfn = adapter->vfs_allocated_count;
3998	unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
3999	int count = 0;
4000
4001	/* return ENOMEM indicating insufficient memory for addresses */
4002	if (netdev_uc_count(netdev) > rar_entries)
4003		return -ENOMEM;
4004
4005	if (!netdev_uc_empty(netdev) && rar_entries) {
4006		struct netdev_hw_addr *ha;
4007
4008		netdev_for_each_uc_addr(ha, netdev) {
4009			if (!rar_entries)
4010				break;
4011			igb_rar_set_qsel(adapter, ha->addr,
4012					 rar_entries--,
4013					 vfn);
4014			count++;
4015		}
4016	}
4017	/* write the addresses in reverse order to avoid write combining */
4018	for (; rar_entries > 0 ; rar_entries--) {
4019		wr32(E1000_RAH(rar_entries), 0);
4020		wr32(E1000_RAL(rar_entries), 0);
4021	}
4022	wrfl();
4023
4024	return count;
4025}
4026
4027static int igb_vlan_promisc_enable(struct igb_adapter *adapter)
4028{
4029	struct e1000_hw *hw = &adapter->hw;
4030	u32 i, pf_id;
4031
4032	switch (hw->mac.type) {
4033	case e1000_i210:
4034	case e1000_i211:
4035	case e1000_i350:
4036		/* VLAN filtering needed for VLAN prio filter */
4037		if (adapter->netdev->features & NETIF_F_NTUPLE)
4038			break;
4039		/* fall through */
4040	case e1000_82576:
4041	case e1000_82580:
4042	case e1000_i354:
4043		/* VLAN filtering needed for pool filtering */
4044		if (adapter->vfs_allocated_count)
4045			break;
4046		/* fall through */
4047	default:
4048		return 1;
4049	}
4050
4051	/* We are already in VLAN promisc, nothing to do */
4052	if (adapter->flags & IGB_FLAG_VLAN_PROMISC)
4053		return 0;
4054
4055	if (!adapter->vfs_allocated_count)
4056		goto set_vfta;
4057
4058	/* Add PF to all active pools */
4059	pf_id = adapter->vfs_allocated_count + E1000_VLVF_POOLSEL_SHIFT;
4060
4061	for (i = E1000_VLVF_ARRAY_SIZE; --i;) {
4062		u32 vlvf = rd32(E1000_VLVF(i));
4063
4064		vlvf |= 1 << pf_id;
4065		wr32(E1000_VLVF(i), vlvf);
4066	}
4067
4068set_vfta:
4069	/* Set all bits in the VLAN filter table array */
4070	for (i = E1000_VLAN_FILTER_TBL_SIZE; i--;)
4071		hw->mac.ops.write_vfta(hw, i, ~0U);
4072
4073	/* Set flag so we don't redo unnecessary work */
4074	adapter->flags |= IGB_FLAG_VLAN_PROMISC;
4075
4076	return 0;
4077}
4078
4079#define VFTA_BLOCK_SIZE 8
4080static void igb_scrub_vfta(struct igb_adapter *adapter, u32 vfta_offset)
4081{
4082	struct e1000_hw *hw = &adapter->hw;
4083	u32 vfta[VFTA_BLOCK_SIZE] = { 0 };
4084	u32 vid_start = vfta_offset * 32;
4085	u32 vid_end = vid_start + (VFTA_BLOCK_SIZE * 32);
4086	u32 i, vid, word, bits, pf_id;
4087
4088	/* guarantee that we don't scrub out management VLAN */
4089	vid = adapter->mng_vlan_id;
4090	if (vid >= vid_start && vid < vid_end)
4091		vfta[(vid - vid_start) / 32] |= 1 << (vid % 32);
4092
4093	if (!adapter->vfs_allocated_count)
4094		goto set_vfta;
4095
4096	pf_id = adapter->vfs_allocated_count + E1000_VLVF_POOLSEL_SHIFT;
4097
4098	for (i = E1000_VLVF_ARRAY_SIZE; --i;) {
4099		u32 vlvf = rd32(E1000_VLVF(i));
4100
4101		/* pull VLAN ID from VLVF */
4102		vid = vlvf & VLAN_VID_MASK;
4103
4104		/* only concern ourselves with a certain range */
4105		if (vid < vid_start || vid >= vid_end)
4106			continue;
4107
4108		if (vlvf & E1000_VLVF_VLANID_ENABLE) {
4109			/* record VLAN ID in VFTA */
4110			vfta[(vid - vid_start) / 32] |= 1 << (vid % 32);
4111
4112			/* if PF is part of this then continue */
4113			if (test_bit(vid, adapter->active_vlans))
4114				continue;
4115		}
4116
4117		/* remove PF from the pool */
4118		bits = ~(1 << pf_id);
4119		bits &= rd32(E1000_VLVF(i));
4120		wr32(E1000_VLVF(i), bits);
4121	}
4122
4123set_vfta:
4124	/* extract values from active_vlans and write back to VFTA */
4125	for (i = VFTA_BLOCK_SIZE; i--;) {
4126		vid = (vfta_offset + i) * 32;
4127		word = vid / BITS_PER_LONG;
4128		bits = vid % BITS_PER_LONG;
4129
4130		vfta[i] |= adapter->active_vlans[word] >> bits;
4131
4132		hw->mac.ops.write_vfta(hw, vfta_offset + i, vfta[i]);
4133	}
4134}
4135
4136static void igb_vlan_promisc_disable(struct igb_adapter *adapter)
4137{
4138	u32 i;
4139
4140	/* We are not in VLAN promisc, nothing to do */
4141	if (!(adapter->flags & IGB_FLAG_VLAN_PROMISC))
4142		return;
4143
4144	/* Set flag so we don't redo unnecessary work */
4145	adapter->flags &= ~IGB_FLAG_VLAN_PROMISC;
4146
4147	for (i = 0; i < E1000_VLAN_FILTER_TBL_SIZE; i += VFTA_BLOCK_SIZE)
4148		igb_scrub_vfta(adapter, i);
4149}
4150
4151/**
4152 *  igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
4153 *  @netdev: network interface device structure
4154 *
4155 *  The set_rx_mode entry point is called whenever the unicast or multicast
4156 *  address lists or the network interface flags are updated.  This routine is
4157 *  responsible for configuring the hardware for proper unicast, multicast,
4158 *  promiscuous mode, and all-multi behavior.
4159 **/
4160static void igb_set_rx_mode(struct net_device *netdev)
4161{
4162	struct igb_adapter *adapter = netdev_priv(netdev);
4163	struct e1000_hw *hw = &adapter->hw;
4164	unsigned int vfn = adapter->vfs_allocated_count;
4165	u32 rctl = 0, vmolr = 0;
4166	int count;
4167
4168	/* Check for Promiscuous and All Multicast modes */
4169	if (netdev->flags & IFF_PROMISC) {
4170		rctl |= E1000_RCTL_UPE | E1000_RCTL_MPE;
4171		vmolr |= E1000_VMOLR_MPME;
4172
4173		/* enable use of UTA filter to force packets to default pool */
4174		if (hw->mac.type == e1000_82576)
4175			vmolr |= E1000_VMOLR_ROPE;
4176	} else {
4177		if (netdev->flags & IFF_ALLMULTI) {
4178			rctl |= E1000_RCTL_MPE;
4179			vmolr |= E1000_VMOLR_MPME;
4180		} else {
4181			/* Write addresses to the MTA, if the attempt fails
4182			 * then we should just turn on promiscuous mode so
4183			 * that we can at least receive multicast traffic
4184			 */
4185			count = igb_write_mc_addr_list(netdev);
4186			if (count < 0) {
4187				rctl |= E1000_RCTL_MPE;
4188				vmolr |= E1000_VMOLR_MPME;
4189			} else if (count) {
4190				vmolr |= E1000_VMOLR_ROMPE;
4191			}
4192		}
4193	}
4194
4195	/* Write addresses to available RAR registers, if there is not
4196	 * sufficient space to store all the addresses then enable
4197	 * unicast promiscuous mode
4198	 */
4199	count = igb_write_uc_addr_list(netdev);
4200	if (count < 0) {
4201		rctl |= E1000_RCTL_UPE;
4202		vmolr |= E1000_VMOLR_ROPE;
4203	}
4204
4205	/* enable VLAN filtering by default */
4206	rctl |= E1000_RCTL_VFE;
4207
4208	/* disable VLAN filtering for modes that require it */
4209	if ((netdev->flags & IFF_PROMISC) ||
4210	    (netdev->features & NETIF_F_RXALL)) {
4211		/* if we fail to set all rules then just clear VFE */
4212		if (igb_vlan_promisc_enable(adapter))
4213			rctl &= ~E1000_RCTL_VFE;
4214	} else {
4215		igb_vlan_promisc_disable(adapter);
4216	}
4217
4218	/* update state of unicast, multicast, and VLAN filtering modes */
4219	rctl |= rd32(E1000_RCTL) & ~(E1000_RCTL_UPE | E1000_RCTL_MPE |
4220				     E1000_RCTL_VFE);
4221	wr32(E1000_RCTL, rctl);
4222
4223	/* In order to support SR-IOV and eventually VMDq it is necessary to set
4224	 * the VMOLR to enable the appropriate modes.  Without this workaround
4225	 * we will have issues with VLAN tag stripping not being done for frames
4226	 * that are only arriving because we are the default pool
4227	 */
4228	if ((hw->mac.type < e1000_82576) || (hw->mac.type > e1000_i350))
4229		return;
4230
4231	/* set UTA to appropriate mode */
4232	igb_set_uta(adapter, !!(vmolr & E1000_VMOLR_ROPE));
4233
4234	vmolr |= rd32(E1000_VMOLR(vfn)) &
4235		 ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
4236
4237	/* enable Rx jumbo frames, no need for restriction */
4238	vmolr &= ~E1000_VMOLR_RLPML_MASK;
4239	vmolr |= MAX_JUMBO_FRAME_SIZE | E1000_VMOLR_LPE;
4240
4241	wr32(E1000_VMOLR(vfn), vmolr);
4242	wr32(E1000_RLPML, MAX_JUMBO_FRAME_SIZE);
4243
4244	igb_restore_vf_multicasts(adapter);
4245}
4246
4247static void igb_check_wvbr(struct igb_adapter *adapter)
4248{
4249	struct e1000_hw *hw = &adapter->hw;
4250	u32 wvbr = 0;
4251
4252	switch (hw->mac.type) {
4253	case e1000_82576:
4254	case e1000_i350:
4255		wvbr = rd32(E1000_WVBR);
4256		if (!wvbr)
4257			return;
4258		break;
4259	default:
4260		break;
4261	}
4262
4263	adapter->wvbr |= wvbr;
4264}
4265
4266#define IGB_STAGGERED_QUEUE_OFFSET 8
4267
4268static void igb_spoof_check(struct igb_adapter *adapter)
4269{
4270	int j;
4271
4272	if (!adapter->wvbr)
4273		return;
4274
4275	for (j = 0; j < adapter->vfs_allocated_count; j++) {
4276		if (adapter->wvbr & (1 << j) ||
4277		    adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
4278			dev_warn(&adapter->pdev->dev,
4279				"Spoof event(s) detected on VF %d\n", j);
4280			adapter->wvbr &=
4281				~((1 << j) |
4282				  (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
4283		}
4284	}
4285}
4286
4287/* Need to wait a few seconds after link up to get diagnostic information from
4288 * the phy
4289 */
4290static void igb_update_phy_info(unsigned long data)
4291{
4292	struct igb_adapter *adapter = (struct igb_adapter *) data;
4293	igb_get_phy_info(&adapter->hw);
4294}
4295
4296/**
4297 *  igb_has_link - check shared code for link and determine up/down
4298 *  @adapter: pointer to driver private info
4299 **/
4300bool igb_has_link(struct igb_adapter *adapter)
4301{
4302	struct e1000_hw *hw = &adapter->hw;
4303	bool link_active = false;
4304
4305	/* get_link_status is set on LSC (link status) interrupt or
4306	 * rx sequence error interrupt.  get_link_status will stay
4307	 * false until the e1000_check_for_link establishes link
4308	 * for copper adapters ONLY
4309	 */
4310	switch (hw->phy.media_type) {
4311	case e1000_media_type_copper:
4312		if (!hw->mac.get_link_status)
4313			return true;
4314	case e1000_media_type_internal_serdes:
4315		hw->mac.ops.check_for_link(hw);
4316		link_active = !hw->mac.get_link_status;
4317		break;
4318	default:
4319	case e1000_media_type_unknown:
4320		break;
4321	}
4322
4323	if (((hw->mac.type == e1000_i210) ||
4324	     (hw->mac.type == e1000_i211)) &&
4325	     (hw->phy.id == I210_I_PHY_ID)) {
4326		if (!netif_carrier_ok(adapter->netdev)) {
4327			adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
4328		} else if (!(adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)) {
4329			adapter->flags |= IGB_FLAG_NEED_LINK_UPDATE;
4330			adapter->link_check_timeout = jiffies;
4331		}
4332	}
4333
4334	return link_active;
4335}
4336
4337static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
4338{
4339	bool ret = false;
4340	u32 ctrl_ext, thstat;
4341
4342	/* check for thermal sensor event on i350 copper only */
4343	if (hw->mac.type == e1000_i350) {
4344		thstat = rd32(E1000_THSTAT);
4345		ctrl_ext = rd32(E1000_CTRL_EXT);
4346
4347		if ((hw->phy.media_type == e1000_media_type_copper) &&
4348		    !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII))
4349			ret = !!(thstat & event);
4350	}
4351
4352	return ret;
4353}
4354
4355/**
4356 *  igb_check_lvmmc - check for malformed packets received
4357 *  and indicated in LVMMC register
4358 *  @adapter: pointer to adapter
4359 **/
4360static void igb_check_lvmmc(struct igb_adapter *adapter)
4361{
4362	struct e1000_hw *hw = &adapter->hw;
4363	u32 lvmmc;
4364
4365	lvmmc = rd32(E1000_LVMMC);
4366	if (lvmmc) {
4367		if (unlikely(net_ratelimit())) {
4368			netdev_warn(adapter->netdev,
4369				    "malformed Tx packet detected and dropped, LVMMC:0x%08x\n",
4370				    lvmmc);
4371		}
4372	}
4373}
4374
4375/**
4376 *  igb_watchdog - Timer Call-back
4377 *  @data: pointer to adapter cast into an unsigned long
4378 **/
4379static void igb_watchdog(unsigned long data)
4380{
4381	struct igb_adapter *adapter = (struct igb_adapter *)data;
4382	/* Do the rest outside of interrupt context */
4383	schedule_work(&adapter->watchdog_task);
4384}
4385
4386static void igb_watchdog_task(struct work_struct *work)
4387{
4388	struct igb_adapter *adapter = container_of(work,
4389						   struct igb_adapter,
4390						   watchdog_task);
4391	struct e1000_hw *hw = &adapter->hw;
4392	struct e1000_phy_info *phy = &hw->phy;
4393	struct net_device *netdev = adapter->netdev;
4394	u32 link;
4395	int i;
4396	u32 connsw;
4397	u16 phy_data, retry_count = 20;
4398
4399	link = igb_has_link(adapter);
4400
4401	if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) {
4402		if (time_after(jiffies, (adapter->link_check_timeout + HZ)))
4403			adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
4404		else
4405			link = false;
4406	}
4407
4408	/* Force link down if we have fiber to swap to */
4409	if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
4410		if (hw->phy.media_type == e1000_media_type_copper) {
4411			connsw = rd32(E1000_CONNSW);
4412			if (!(connsw & E1000_CONNSW_AUTOSENSE_EN))
4413				link = 0;
4414		}
4415	}
4416	if (link) {
4417		/* Perform a reset if the media type changed. */
4418		if (hw->dev_spec._82575.media_changed) {
4419			hw->dev_spec._82575.media_changed = false;
4420			adapter->flags |= IGB_FLAG_MEDIA_RESET;
4421			igb_reset(adapter);
4422		}
4423		/* Cancel scheduled suspend requests. */
4424		pm_runtime_resume(netdev->dev.parent);
4425
4426		if (!netif_carrier_ok(netdev)) {
4427			u32 ctrl;
4428
4429			hw->mac.ops.get_speed_and_duplex(hw,
4430							 &adapter->link_speed,
4431							 &adapter->link_duplex);
4432
4433			ctrl = rd32(E1000_CTRL);
4434			/* Links status message must follow this format */
4435			netdev_info(netdev,
4436			       "igb: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
4437			       netdev->name,
4438			       adapter->link_speed,
4439			       adapter->link_duplex == FULL_DUPLEX ?
4440			       "Full" : "Half",
4441			       (ctrl & E1000_CTRL_TFCE) &&
4442			       (ctrl & E1000_CTRL_RFCE) ? "RX/TX" :
4443			       (ctrl & E1000_CTRL_RFCE) ?  "RX" :
4444			       (ctrl & E1000_CTRL_TFCE) ?  "TX" : "None");
4445
4446			/* disable EEE if enabled */
4447			if ((adapter->flags & IGB_FLAG_EEE) &&
4448				(adapter->link_duplex == HALF_DUPLEX)) {
4449				dev_info(&adapter->pdev->dev,
4450				"EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex.\n");
4451				adapter->hw.dev_spec._82575.eee_disable = true;
4452				adapter->flags &= ~IGB_FLAG_EEE;
4453			}
4454
4455			/* check if SmartSpeed worked */
4456			igb_check_downshift(hw);
4457			if (phy->speed_downgraded)
4458				netdev_warn(netdev, "Link Speed was downgraded by SmartSpeed\n");
4459
4460			/* check for thermal sensor event */
4461			if (igb_thermal_sensor_event(hw,
4462			    E1000_THSTAT_LINK_THROTTLE))
4463				netdev_info(netdev, "The network adapter link speed was downshifted because it overheated\n");
4464
4465			/* adjust timeout factor according to speed/duplex */
4466			adapter->tx_timeout_factor = 1;
4467			switch (adapter->link_speed) {
4468			case SPEED_10:
4469				adapter->tx_timeout_factor = 14;
4470				break;
4471			case SPEED_100:
4472				/* maybe add some timeout factor ? */
4473				break;
4474			}
4475
4476			if (adapter->link_speed != SPEED_1000)
4477				goto no_wait;
4478
4479			/* wait for Remote receiver status OK */
4480retry_read_status:
4481			if (!igb_read_phy_reg(hw, PHY_1000T_STATUS,
4482					      &phy_data)) {
4483				if (!(phy_data & SR_1000T_REMOTE_RX_STATUS) &&
4484				    retry_count) {
4485					msleep(100);
4486					retry_count--;
4487					goto retry_read_status;
4488				} else if (!retry_count) {
4489					dev_err(&adapter->pdev->dev, "exceed max 2 second\n");
4490				}
4491			} else {
4492				dev_err(&adapter->pdev->dev, "read 1000Base-T Status Reg\n");
4493			}
4494no_wait:
4495			netif_carrier_on(netdev);
4496
4497			igb_ping_all_vfs(adapter);
4498			igb_check_vf_rate_limit(adapter);
4499
4500			/* link state has changed, schedule phy info update */
4501			if (!test_bit(__IGB_DOWN, &adapter->state))
4502				mod_timer(&adapter->phy_info_timer,
4503					  round_jiffies(jiffies + 2 * HZ));
4504		}
4505	} else {
4506		if (netif_carrier_ok(netdev)) {
4507			adapter->link_speed = 0;
4508			adapter->link_duplex = 0;
4509
4510			/* check for thermal sensor event */
4511			if (igb_thermal_sensor_event(hw,
4512			    E1000_THSTAT_PWR_DOWN)) {
4513				netdev_err(netdev, "The network adapter was stopped because it overheated\n");
4514			}
4515
4516			/* Links status message must follow this format */
4517			netdev_info(netdev, "igb: %s NIC Link is Down\n",
4518			       netdev->name);
4519			netif_carrier_off(netdev);
4520
4521			igb_ping_all_vfs(adapter);
4522
4523			/* link state has changed, schedule phy info update */
4524			if (!test_bit(__IGB_DOWN, &adapter->state))
4525				mod_timer(&adapter->phy_info_timer,
4526					  round_jiffies(jiffies + 2 * HZ));
4527
4528			/* link is down, time to check for alternate media */
4529			if (adapter->flags & IGB_FLAG_MAS_ENABLE) {
4530				igb_check_swap_media(adapter);
4531				if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
4532					schedule_work(&adapter->reset_task);
4533					/* return immediately */
4534					return;
4535				}
4536			}
4537			pm_schedule_suspend(netdev->dev.parent,
4538					    MSEC_PER_SEC * 5);
4539
4540		/* also check for alternate media here */
4541		} else if (!netif_carrier_ok(netdev) &&
4542			   (adapter->flags & IGB_FLAG_MAS_ENABLE)) {
4543			igb_check_swap_media(adapter);
4544			if (adapter->flags & IGB_FLAG_MEDIA_RESET) {
4545				schedule_work(&adapter->reset_task);
4546				/* return immediately */
4547				return;
4548			}
4549		}
4550	}
4551
4552	spin_lock(&adapter->stats64_lock);
4553	igb_update_stats(adapter, &adapter->stats64);
4554	spin_unlock(&adapter->stats64_lock);
4555
4556	for (i = 0; i < adapter->num_tx_queues; i++) {
4557		struct igb_ring *tx_ring = adapter->tx_ring[i];
4558		if (!netif_carrier_ok(netdev)) {
4559			/* We've lost link, so the controller stops DMA,
4560			 * but we've got queued Tx work that's never going
4561			 * to get done, so reset controller to flush Tx.
4562			 * (Do the reset outside of interrupt context).
4563			 */
4564			if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
4565				adapter->tx_timeout_count++;
4566				schedule_work(&adapter->reset_task);
4567				/* return immediately since reset is imminent */
4568				return;
4569			}
4570		}
4571
4572		/* Force detection of hung controller every watchdog period */
4573		set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
4574	}
4575
4576	/* Cause software interrupt to ensure Rx ring is cleaned */
4577	if (adapter->flags & IGB_FLAG_HAS_MSIX) {
4578		u32 eics = 0;
4579
4580		for (i = 0; i < adapter->num_q_vectors; i++)
4581			eics |= adapter->q_vector[i]->eims_value;
4582		wr32(E1000_EICS, eics);
4583	} else {
4584		wr32(E1000_ICS, E1000_ICS_RXDMT0);
4585	}
4586
4587	igb_spoof_check(adapter);
4588	igb_ptp_rx_hang(adapter);
4589
4590	/* Check LVMMC register on i350/i354 only */
4591	if ((adapter->hw.mac.type == e1000_i350) ||
4592	    (adapter->hw.mac.type == e1000_i354))
4593		igb_check_lvmmc(adapter);
4594
4595	/* Reset the timer */
4596	if (!test_bit(__IGB_DOWN, &adapter->state)) {
4597		if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)
4598			mod_timer(&adapter->watchdog_timer,
4599				  round_jiffies(jiffies +  HZ));
4600		else
4601			mod_timer(&adapter->watchdog_timer,
4602				  round_jiffies(jiffies + 2 * HZ));
4603	}
4604}
4605
4606enum latency_range {
4607	lowest_latency = 0,
4608	low_latency = 1,
4609	bulk_latency = 2,
4610	latency_invalid = 255
4611};
4612
4613/**
4614 *  igb_update_ring_itr - update the dynamic ITR value based on packet size
4615 *  @q_vector: pointer to q_vector
4616 *
4617 *  Stores a new ITR value based on strictly on packet size.  This
4618 *  algorithm is less sophisticated than that used in igb_update_itr,
4619 *  due to the difficulty of synchronizing statistics across multiple
4620 *  receive rings.  The divisors and thresholds used by this function
4621 *  were determined based on theoretical maximum wire speed and testing
4622 *  data, in order to minimize response time while increasing bulk
4623 *  throughput.
4624 *  This functionality is controlled by ethtool's coalescing settings.
4625 *  NOTE:  This function is called only when operating in a multiqueue
4626 *         receive environment.
4627 **/
4628static void igb_update_ring_itr(struct igb_q_vector *q_vector)
4629{
4630	int new_val = q_vector->itr_val;
4631	int avg_wire_size = 0;
4632	struct igb_adapter *adapter = q_vector->adapter;
4633	unsigned int packets;
4634
4635	/* For non-gigabit speeds, just fix the interrupt rate at 4000
4636	 * ints/sec - ITR timer value of 120 ticks.
4637	 */
4638	if (adapter->link_speed != SPEED_1000) {
4639		new_val = IGB_4K_ITR;
4640		goto set_itr_val;
4641	}
4642
4643	packets = q_vector->rx.total_packets;
4644	if (packets)
4645		avg_wire_size = q_vector->rx.total_bytes / packets;
4646
4647	packets = q_vector->tx.total_packets;
4648	if (packets)
4649		avg_wire_size = max_t(u32, avg_wire_size,
4650				      q_vector->tx.total_bytes / packets);
4651
4652	/* if avg_wire_size isn't set no work was done */
4653	if (!avg_wire_size)
4654		goto clear_counts;
4655
4656	/* Add 24 bytes to size to account for CRC, preamble, and gap */
4657	avg_wire_size += 24;
4658
4659	/* Don't starve jumbo frames */
4660	avg_wire_size = min(avg_wire_size, 3000);
4661
4662	/* Give a little boost to mid-size frames */
4663	if ((avg_wire_size > 300) && (avg_wire_size < 1200))
4664		new_val = avg_wire_size / 3;
4665	else
4666		new_val = avg_wire_size / 2;
4667
4668	/* conservative mode (itr 3) eliminates the lowest_latency setting */
4669	if (new_val < IGB_20K_ITR &&
4670	    ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
4671	     (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
4672		new_val = IGB_20K_ITR;
4673
4674set_itr_val:
4675	if (new_val != q_vector->itr_val) {
4676		q_vector->itr_val = new_val;
4677		q_vector->set_itr = 1;
4678	}
4679clear_counts:
4680	q_vector->rx.total_bytes = 0;
4681	q_vector->rx.total_packets = 0;
4682	q_vector->tx.total_bytes = 0;
4683	q_vector->tx.total_packets = 0;
4684}
4685
4686/**
4687 *  igb_update_itr - update the dynamic ITR value based on statistics
4688 *  @q_vector: pointer to q_vector
4689 *  @ring_container: ring info to update the itr for
4690 *
4691 *  Stores a new ITR value based on packets and byte
4692 *  counts during the last interrupt.  The advantage of per interrupt
4693 *  computation is faster updates and more accurate ITR for the current
4694 *  traffic pattern.  Constants in this function were computed
4695 *  based on theoretical maximum wire speed and thresholds were set based
4696 *  on testing data as well as attempting to minimize response time
4697 *  while increasing bulk throughput.
4698 *  This functionality is controlled by ethtool's coalescing settings.
4699 *  NOTE:  These calculations are only valid when operating in a single-
4700 *         queue environment.
4701 **/
4702static void igb_update_itr(struct igb_q_vector *q_vector,
4703			   struct igb_ring_container *ring_container)
4704{
4705	unsigned int packets = ring_container->total_packets;
4706	unsigned int bytes = ring_container->total_bytes;
4707	u8 itrval = ring_container->itr;
4708
4709	/* no packets, exit with status unchanged */
4710	if (packets == 0)
4711		return;
4712
4713	switch (itrval) {
4714	case lowest_latency:
4715		/* handle TSO and jumbo frames */
4716		if (bytes/packets > 8000)
4717			itrval = bulk_latency;
4718		else if ((packets < 5) && (bytes > 512))
4719			itrval = low_latency;
4720		break;
4721	case low_latency:  /* 50 usec aka 20000 ints/s */
4722		if (bytes > 10000) {
4723			/* this if handles the TSO accounting */
4724			if (bytes/packets > 8000)
4725				itrval = bulk_latency;
4726			else if ((packets < 10) || ((bytes/packets) > 1200))
4727				itrval = bulk_latency;
4728			else if ((packets > 35))
4729				itrval = lowest_latency;
4730		} else if (bytes/packets > 2000) {
4731			itrval = bulk_latency;
4732		} else if (packets <= 2 && bytes < 512) {
4733			itrval = lowest_latency;
4734		}
4735		break;
4736	case bulk_latency: /* 250 usec aka 4000 ints/s */
4737		if (bytes > 25000) {
4738			if (packets > 35)
4739				itrval = low_latency;
4740		} else if (bytes < 1500) {
4741			itrval = low_latency;
4742		}
4743		break;
4744	}
4745
4746	/* clear work counters since we have the values we need */
4747	ring_container->total_bytes = 0;
4748	ring_container->total_packets = 0;
4749
4750	/* write updated itr to ring container */
4751	ring_container->itr = itrval;
4752}
4753
4754static void igb_set_itr(struct igb_q_vector *q_vector)
4755{
4756	struct igb_adapter *adapter = q_vector->adapter;
4757	u32 new_itr = q_vector->itr_val;
4758	u8 current_itr = 0;
4759
4760	/* for non-gigabit speeds, just fix the interrupt rate at 4000 */
4761	if (adapter->link_speed != SPEED_1000) {
4762		current_itr = 0;
4763		new_itr = IGB_4K_ITR;
4764		goto set_itr_now;
4765	}
4766
4767	igb_update_itr(q_vector, &q_vector->tx);
4768	igb_update_itr(q_vector, &q_vector->rx);
4769
4770	current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
4771
4772	/* conservative mode (itr 3) eliminates the lowest_latency setting */
4773	if (current_itr == lowest_latency &&
4774	    ((q_vector->rx.ring && adapter->rx_itr_setting == 3) ||
4775	     (!q_vector->rx.ring && adapter->tx_itr_setting == 3)))
4776		current_itr = low_latency;
4777
4778	switch (current_itr) {
4779	/* counts and packets in update_itr are dependent on these numbers */
4780	case lowest_latency:
4781		new_itr = IGB_70K_ITR; /* 70,000 ints/sec */
4782		break;
4783	case low_latency:
4784		new_itr = IGB_20K_ITR; /* 20,000 ints/sec */
4785		break;
4786	case bulk_latency:
4787		new_itr = IGB_4K_ITR;  /* 4,000 ints/sec */
4788		break;
4789	default:
4790		break;
4791	}
4792
4793set_itr_now:
4794	if (new_itr != q_vector->itr_val) {
4795		/* this attempts to bias the interrupt rate towards Bulk
4796		 * by adding intermediate steps when interrupt rate is
4797		 * increasing
4798		 */
4799		new_itr = new_itr > q_vector->itr_val ?
4800			  max((new_itr * q_vector->itr_val) /
4801			  (new_itr + (q_vector->itr_val >> 2)),
4802			  new_itr) : new_itr;
4803		/* Don't write the value here; it resets the adapter's
4804		 * internal timer, and causes us to delay far longer than
4805		 * we should between interrupts.  Instead, we write the ITR
4806		 * value at the beginning of the next interrupt so the timing
4807		 * ends up being correct.
4808		 */
4809		q_vector->itr_val = new_itr;
4810		q_vector->set_itr = 1;
4811	}
4812}
4813
4814static void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens,
4815			    u32 type_tucmd, u32 mss_l4len_idx)
4816{
4817	struct e1000_adv_tx_context_desc *context_desc;
4818	u16 i = tx_ring->next_to_use;
4819
4820	context_desc = IGB_TX_CTXTDESC(tx_ring, i);
4821
4822	i++;
4823	tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
4824
4825	/* set bits to identify this as an advanced context descriptor */
4826	type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT;
4827
4828	/* For 82575, context index must be unique per ring. */
4829	if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
4830		mss_l4len_idx |= tx_ring->reg_idx << 4;
4831
4832	context_desc->vlan_macip_lens	= cpu_to_le32(vlan_macip_lens);
4833	context_desc->seqnum_seed	= 0;
4834	context_desc->type_tucmd_mlhl	= cpu_to_le32(type_tucmd);
4835	context_desc->mss_l4len_idx	= cpu_to_le32(mss_l4len_idx);
4836}
4837
4838static int igb_tso(struct igb_ring *tx_ring,
4839		   struct igb_tx_buffer *first,
4840		   u8 *hdr_len)
4841{
4842	struct sk_buff *skb = first->skb;
4843	u32 vlan_macip_lens, type_tucmd;
4844	u32 mss_l4len_idx, l4len;
4845	int err;
4846
4847	if (skb->ip_summed != CHECKSUM_PARTIAL)
4848		return 0;
4849
4850	if (!skb_is_gso(skb))
4851		return 0;
4852
4853	err = skb_cow_head(skb, 0);
4854	if (err < 0)
4855		return err;
4856
4857	/* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
4858	type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP;
4859
4860	if (first->protocol == htons(ETH_P_IP)) {
4861		struct iphdr *iph = ip_hdr(skb);
4862		iph->tot_len = 0;
4863		iph->check = 0;
4864		tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
4865							 iph->daddr, 0,
4866							 IPPROTO_TCP,
4867							 0);
4868		type_tucmd |= E1000_ADVTXD_TUCMD_IPV4;
4869		first->tx_flags |= IGB_TX_FLAGS_TSO |
4870				   IGB_TX_FLAGS_CSUM |
4871				   IGB_TX_FLAGS_IPV4;
4872	} else if (skb_is_gso_v6(skb)) {
4873		ipv6_hdr(skb)->payload_len = 0;
4874		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
4875						       &ipv6_hdr(skb)->daddr,
4876						       0, IPPROTO_TCP, 0);
4877		first->tx_flags |= IGB_TX_FLAGS_TSO |
4878				   IGB_TX_FLAGS_CSUM;
4879	}
4880
4881	/* compute header lengths */
4882	l4len = tcp_hdrlen(skb);
4883	*hdr_len = skb_transport_offset(skb) + l4len;
4884
4885	/* update gso size and bytecount with header size */
4886	first->gso_segs = skb_shinfo(skb)->gso_segs;
4887	first->bytecount += (first->gso_segs - 1) * *hdr_len;
4888
4889	/* MSS L4LEN IDX */
4890	mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT;
4891	mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT;
4892
4893	/* VLAN MACLEN IPLEN */
4894	vlan_macip_lens = skb_network_header_len(skb);
4895	vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
4896	vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
4897
4898	igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx);
4899
4900	return 1;
4901}
4902
4903static inline bool igb_ipv6_csum_is_sctp(struct sk_buff *skb)
4904{
4905	unsigned int offset = 0;
4906
4907	ipv6_find_hdr(skb, &offset, IPPROTO_SCTP, NULL, NULL);
4908
4909	return offset == skb_checksum_start_offset(skb);
4910}
4911
4912static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first)
4913{
4914	struct sk_buff *skb = first->skb;
4915	u32 vlan_macip_lens = 0;
4916	u32 type_tucmd = 0;
4917
4918	if (skb->ip_summed != CHECKSUM_PARTIAL) {
4919csum_failed:
4920		if (!(first->tx_flags & IGB_TX_FLAGS_VLAN))
4921			return;
4922		goto no_csum;
4923	}
4924
4925	switch (skb->csum_offset) {
4926	case offsetof(struct tcphdr, check):
4927		type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP;
4928		/* fall through */
4929	case offsetof(struct udphdr, check):
4930		break;
4931	case offsetof(struct sctphdr, checksum):
4932		/* validate that this is actually an SCTP request */
4933		if (((first->protocol == htons(ETH_P_IP)) &&
4934		     (ip_hdr(skb)->protocol == IPPROTO_SCTP)) ||
4935		    ((first->protocol == htons(ETH_P_IPV6)) &&
4936		     igb_ipv6_csum_is_sctp(skb))) {
4937			type_tucmd = E1000_ADVTXD_TUCMD_L4T_SCTP;
4938			break;
4939		}
4940	default:
4941		skb_checksum_help(skb);
4942		goto csum_failed;
4943	}
4944
4945	/* update TX checksum flag */
4946	first->tx_flags |= IGB_TX_FLAGS_CSUM;
4947	vlan_macip_lens = skb_checksum_start_offset(skb) -
4948			  skb_network_offset(skb);
4949no_csum:
4950	vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT;
4951	vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK;
4952
4953	igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, 0);
4954}
4955
4956#define IGB_SET_FLAG(_input, _flag, _result) \
4957	((_flag <= _result) ? \
4958	 ((u32)(_input & _flag) * (_result / _flag)) : \
4959	 ((u32)(_input & _flag) / (_flag / _result)))
4960
4961static u32 igb_tx_cmd_type(struct sk_buff *skb, u32 tx_flags)
4962{
4963	/* set type for advanced descriptor with frame checksum insertion */
4964	u32 cmd_type = E1000_ADVTXD_DTYP_DATA |
4965		       E1000_ADVTXD_DCMD_DEXT |
4966		       E1000_ADVTXD_DCMD_IFCS;
4967
4968	/* set HW vlan bit if vlan is present */
4969	cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_VLAN,
4970				 (E1000_ADVTXD_DCMD_VLE));
4971
4972	/* set segmentation bits for TSO */
4973	cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSO,
4974				 (E1000_ADVTXD_DCMD_TSE));
4975
4976	/* set timestamp bit if present */
4977	cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSTAMP,
4978				 (E1000_ADVTXD_MAC_TSTAMP));
4979
4980	/* insert frame checksum */
4981	cmd_type ^= IGB_SET_FLAG(skb->no_fcs, 1, E1000_ADVTXD_DCMD_IFCS);
4982
4983	return cmd_type;
4984}
4985
4986static void igb_tx_olinfo_status(struct igb_ring *tx_ring,
4987				 union e1000_adv_tx_desc *tx_desc,
4988				 u32 tx_flags, unsigned int paylen)
4989{
4990	u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT;
4991
4992	/* 82575 requires a unique index per ring */
4993	if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
4994		olinfo_status |= tx_ring->reg_idx << 4;
4995
4996	/* insert L4 checksum */
4997	olinfo_status |= IGB_SET_FLAG(tx_flags,
4998				      IGB_TX_FLAGS_CSUM,
4999				      (E1000_TXD_POPTS_TXSM << 8));
5000
5001	/* insert IPv4 checksum */
5002	olinfo_status |= IGB_SET_FLAG(tx_flags,
5003				      IGB_TX_FLAGS_IPV4,
5004				      (E1000_TXD_POPTS_IXSM << 8));
5005
5006	tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
5007}
5008
5009static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
5010{
5011	struct net_device *netdev = tx_ring->netdev;
5012
5013	netif_stop_subqueue(netdev, tx_ring->queue_index);
5014
5015	/* Herbert's original patch had:
5016	 *  smp_mb__after_netif_stop_queue();
5017	 * but since that doesn't exist yet, just open code it.
5018	 */
5019	smp_mb();
5020
5021	/* We need to check again in a case another CPU has just
5022	 * made room available.
5023	 */
5024	if (igb_desc_unused(tx_ring) < size)
5025		return -EBUSY;
5026
5027	/* A reprieve! */
5028	netif_wake_subqueue(netdev, tx_ring->queue_index);
5029
5030	u64_stats_update_begin(&tx_ring->tx_syncp2);
5031	tx_ring->tx_stats.restart_queue2++;
5032	u64_stats_update_end(&tx_ring->tx_syncp2);
5033
5034	return 0;
5035}
5036
5037static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size)
5038{
5039	if (igb_desc_unused(tx_ring) >= size)
5040		return 0;
5041	return __igb_maybe_stop_tx(tx_ring, size);
5042}
5043
5044static void igb_tx_map(struct igb_ring *tx_ring,
5045		       struct igb_tx_buffer *first,
5046		       const u8 hdr_len)
5047{
5048	struct sk_buff *skb = first->skb;
5049	struct igb_tx_buffer *tx_buffer;
5050	union e1000_adv_tx_desc *tx_desc;
5051	struct skb_frag_struct *frag;
5052	dma_addr_t dma;
5053	unsigned int data_len, size;
5054	u32 tx_flags = first->tx_flags;
5055	u32 cmd_type = igb_tx_cmd_type(skb, tx_flags);
5056	u16 i = tx_ring->next_to_use;
5057
5058	tx_desc = IGB_TX_DESC(tx_ring, i);
5059
5060	igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len);
5061
5062	size = skb_headlen(skb);
5063	data_len = skb->data_len;
5064
5065	dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
5066
5067	tx_buffer = first;
5068
5069	for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
5070		if (dma_mapping_error(tx_ring->dev, dma))
5071			goto dma_error;
5072
5073		/* record length, and DMA address */
5074		dma_unmap_len_set(tx_buffer, len, size);
5075		dma_unmap_addr_set(tx_buffer, dma, dma);
5076
5077		tx_desc->read.buffer_addr = cpu_to_le64(dma);
5078
5079		while (unlikely(size > IGB_MAX_DATA_PER_TXD)) {
5080			tx_desc->read.cmd_type_len =
5081				cpu_to_le32(cmd_type ^ IGB_MAX_DATA_PER_TXD);
5082
5083			i++;
5084			tx_desc++;
5085			if (i == tx_ring->count) {
5086				tx_desc = IGB_TX_DESC(tx_ring, 0);
5087				i = 0;
5088			}
5089			tx_desc->read.olinfo_status = 0;
5090
5091			dma += IGB_MAX_DATA_PER_TXD;
5092			size -= IGB_MAX_DATA_PER_TXD;
5093
5094			tx_desc->read.buffer_addr = cpu_to_le64(dma);
5095		}
5096
5097		if (likely(!data_len))
5098			break;
5099
5100		tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size);
5101
5102		i++;
5103		tx_desc++;
5104		if (i == tx_ring->count) {
5105			tx_desc = IGB_TX_DESC(tx_ring, 0);
5106			i = 0;
5107		}
5108		tx_desc->read.olinfo_status = 0;
5109
5110		size = skb_frag_size(frag);
5111		data_len -= size;
5112
5113		dma = skb_frag_dma_map(tx_ring->dev, frag, 0,
5114				       size, DMA_TO_DEVICE);
5115
5116		tx_buffer = &tx_ring->tx_buffer_info[i];
5117	}
5118
5119	/* write last descriptor with RS and EOP bits */
5120	cmd_type |= size | IGB_TXD_DCMD;
5121	tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
5122
5123	netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
5124
5125	/* set the timestamp */
5126	first->time_stamp = jiffies;
5127
5128	/* Force memory writes to complete before letting h/w know there
5129	 * are new descriptors to fetch.  (Only applicable for weak-ordered
5130	 * memory model archs, such as IA-64).
5131	 *
5132	 * We also need this memory barrier to make certain all of the
5133	 * status bits have been updated before next_to_watch is written.
5134	 */
5135	wmb();
5136
5137	/* set next_to_watch value indicating a packet is present */
5138	first->next_to_watch = tx_desc;
5139
5140	i++;
5141	if (i == tx_ring->count)
5142		i = 0;
5143
5144	tx_ring->next_to_use = i;
5145
5146	/* Make sure there is space in the ring for the next send. */
5147	igb_maybe_stop_tx(tx_ring, DESC_NEEDED);
5148
5149	if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) {
5150		writel(i, tx_ring->tail);
5151
5152		/* we need this if more than one processor can write to our tail
5153		 * at a time, it synchronizes IO on IA64/Altix systems
5154		 */
5155		mmiowb();
5156	}
5157	return;
5158
5159dma_error:
5160	dev_err(tx_ring->dev, "TX DMA map failed\n");
5161
5162	/* clear dma mappings for failed tx_buffer_info map */
5163	for (;;) {
5164		tx_buffer = &tx_ring->tx_buffer_info[i];
5165		igb_unmap_and_free_tx_resource(tx_ring, tx_buffer);
5166		if (tx_buffer == first)
5167			break;
5168		if (i == 0)
5169			i = tx_ring->count;
5170		i--;
5171	}
5172
5173	tx_ring->next_to_use = i;
5174}
5175
5176netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
5177				struct igb_ring *tx_ring)
5178{
5179	struct igb_tx_buffer *first;
5180	int tso;
5181	u32 tx_flags = 0;
5182	unsigned short f;
5183	u16 count = TXD_USE_COUNT(skb_headlen(skb));
5184	__be16 protocol = vlan_get_protocol(skb);
5185	u8 hdr_len = 0;
5186
5187	/* need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD,
5188	 *       + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD,
5189	 *       + 2 desc gap to keep tail from touching head,
5190	 *       + 1 desc for context descriptor,
5191	 * otherwise try next time
5192	 */
5193	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
5194		count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
5195
5196	if (igb_maybe_stop_tx(tx_ring, count + 3)) {
5197		/* this is a hard error */
5198		return NETDEV_TX_BUSY;
5199	}
5200
5201	/* record the location of the first descriptor for this packet */
5202	first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
5203	first->skb = skb;
5204	first->bytecount = skb->len;
5205	first->gso_segs = 1;
5206
5207	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
5208		struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
5209
5210		if (!test_and_set_bit_lock(__IGB_PTP_TX_IN_PROGRESS,
5211					   &adapter->state)) {
5212			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
5213			tx_flags |= IGB_TX_FLAGS_TSTAMP;
5214
5215			adapter->ptp_tx_skb = skb_get(skb);
5216			adapter->ptp_tx_start = jiffies;
5217			if (adapter->hw.mac.type == e1000_82576)
5218				schedule_work(&adapter->ptp_tx_work);
5219		}
5220	}
5221
5222	skb_tx_timestamp(skb);
5223
5224	if (skb_vlan_tag_present(skb)) {
5225		tx_flags |= IGB_TX_FLAGS_VLAN;
5226		tx_flags |= (skb_vlan_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
5227	}
5228
5229	/* record initial flags and protocol */
5230	first->tx_flags = tx_flags;
5231	first->protocol = protocol;
5232
5233	tso = igb_tso(tx_ring, first, &hdr_len);
5234	if (tso < 0)
5235		goto out_drop;
5236	else if (!tso)
5237		igb_tx_csum(tx_ring, first);
5238
5239	igb_tx_map(tx_ring, first, hdr_len);
5240
5241	return NETDEV_TX_OK;
5242
5243out_drop:
5244	igb_unmap_and_free_tx_resource(tx_ring, first);
5245
5246	return NETDEV_TX_OK;
5247}
5248
5249static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter,
5250						    struct sk_buff *skb)
5251{
5252	unsigned int r_idx = skb->queue_mapping;
5253
5254	if (r_idx >= adapter->num_tx_queues)
5255		r_idx = r_idx % adapter->num_tx_queues;
5256
5257	return adapter->tx_ring[r_idx];
5258}
5259
5260static netdev_tx_t igb_xmit_frame(struct sk_buff *skb,
5261				  struct net_device *netdev)
5262{
5263	struct igb_adapter *adapter = netdev_priv(netdev);
5264
5265	/* The minimum packet size with TCTL.PSP set is 17 so pad the skb
5266	 * in order to meet this minimum size requirement.
5267	 */
5268	if (skb_put_padto(skb, 17))
5269		return NETDEV_TX_OK;
5270
5271	return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb));
5272}
5273
5274/**
5275 *  igb_tx_timeout - Respond to a Tx Hang
5276 *  @netdev: network interface device structure
5277 **/
5278static void igb_tx_timeout(struct net_device *netdev)
5279{
5280	struct igb_adapter *adapter = netdev_priv(netdev);
5281	struct e1000_hw *hw = &adapter->hw;
5282
5283	/* Do the reset outside of interrupt context */
5284	adapter->tx_timeout_count++;
5285
5286	if (hw->mac.type >= e1000_82580)
5287		hw->dev_spec._82575.global_device_reset = true;
5288
5289	schedule_work(&adapter->reset_task);
5290	wr32(E1000_EICS,
5291	     (adapter->eims_enable_mask & ~adapter->eims_other));
5292}
5293
5294static void igb_reset_task(struct work_struct *work)
5295{
5296	struct igb_adapter *adapter;
5297	adapter = container_of(work, struct igb_adapter, reset_task);
5298
5299	igb_dump(adapter);
5300	netdev_err(adapter->netdev, "Reset adapter\n");
5301	igb_reinit_locked(adapter);
5302}
5303
5304/**
5305 *  igb_get_stats64 - Get System Network Statistics
5306 *  @netdev: network interface device structure
5307 *  @stats: rtnl_link_stats64 pointer
5308 **/
5309static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev,
5310						struct rtnl_link_stats64 *stats)
5311{
5312	struct igb_adapter *adapter = netdev_priv(netdev);
5313
5314	spin_lock(&adapter->stats64_lock);
5315	igb_update_stats(adapter, &adapter->stats64);
5316	memcpy(stats, &adapter->stats64, sizeof(*stats));
5317	spin_unlock(&adapter->stats64_lock);
5318
5319	return stats;
5320}
5321
5322/**
5323 *  igb_change_mtu - Change the Maximum Transfer Unit
5324 *  @netdev: network interface device structure
5325 *  @new_mtu: new value for maximum frame size
5326 *
5327 *  Returns 0 on success, negative on failure
5328 **/
5329static int igb_change_mtu(struct net_device *netdev, int new_mtu)
5330{
5331	struct igb_adapter *adapter = netdev_priv(netdev);
5332	struct pci_dev *pdev = adapter->pdev;
5333	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
5334
5335	if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
5336		dev_err(&pdev->dev, "Invalid MTU setting\n");
5337		return -EINVAL;
5338	}
5339
5340#define MAX_STD_JUMBO_FRAME_SIZE 9238
5341	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
5342		dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
5343		return -EINVAL;
5344	}
5345
5346	/* adjust max frame to be at least the size of a standard frame */
5347	if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN))
5348		max_frame = ETH_FRAME_LEN + ETH_FCS_LEN;
5349
5350	while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
5351		usleep_range(1000, 2000);
5352
5353	/* igb_down has a dependency on max_frame_size */
5354	adapter->max_frame_size = max_frame;
5355
5356	if (netif_running(netdev))
5357		igb_down(adapter);
5358
5359	dev_info(&pdev->dev, "changing MTU from %d to %d\n",
5360		 netdev->mtu, new_mtu);
5361	netdev->mtu = new_mtu;
5362
5363	if (netif_running(netdev))
5364		igb_up(adapter);
5365	else
5366		igb_reset(adapter);
5367
5368	clear_bit(__IGB_RESETTING, &adapter->state);
5369
5370	return 0;
5371}
5372
5373/**
5374 *  igb_update_stats - Update the board statistics counters
5375 *  @adapter: board private structure
5376 **/
5377void igb_update_stats(struct igb_adapter *adapter,
5378		      struct rtnl_link_stats64 *net_stats)
5379{
5380	struct e1000_hw *hw = &adapter->hw;
5381	struct pci_dev *pdev = adapter->pdev;
5382	u32 reg, mpc;
5383	int i;
5384	u64 bytes, packets;
5385	unsigned int start;
5386	u64 _bytes, _packets;
5387
5388	/* Prevent stats update while adapter is being reset, or if the pci
5389	 * connection is down.
5390	 */
5391	if (adapter->link_speed == 0)
5392		return;
5393	if (pci_channel_offline(pdev))
5394		return;
5395
5396	bytes = 0;
5397	packets = 0;
5398
5399	rcu_read_lock();
5400	for (i = 0; i < adapter->num_rx_queues; i++) {
5401		struct igb_ring *ring = adapter->rx_ring[i];
5402		u32 rqdpc = rd32(E1000_RQDPC(i));
5403		if (hw->mac.type >= e1000_i210)
5404			wr32(E1000_RQDPC(i), 0);
5405
5406		if (rqdpc) {
5407			ring->rx_stats.drops += rqdpc;
5408			net_stats->rx_fifo_errors += rqdpc;
5409		}
5410
5411		do {
5412			start = u64_stats_fetch_begin_irq(&ring->rx_syncp);
5413			_bytes = ring->rx_stats.bytes;
5414			_packets = ring->rx_stats.packets;
5415		} while (u64_stats_fetch_retry_irq(&ring->rx_syncp, start));
5416		bytes += _bytes;
5417		packets += _packets;
5418	}
5419
5420	net_stats->rx_bytes = bytes;
5421	net_stats->rx_packets = packets;
5422
5423	bytes = 0;
5424	packets = 0;
5425	for (i = 0; i < adapter->num_tx_queues; i++) {
5426		struct igb_ring *ring = adapter->tx_ring[i];
5427		do {
5428			start = u64_stats_fetch_begin_irq(&ring->tx_syncp);
5429			_bytes = ring->tx_stats.bytes;
5430			_packets = ring->tx_stats.packets;
5431		} while (u64_stats_fetch_retry_irq(&ring->tx_syncp, start));
5432		bytes += _bytes;
5433		packets += _packets;
5434	}
5435	net_stats->tx_bytes = bytes;
5436	net_stats->tx_packets = packets;
5437	rcu_read_unlock();
5438
5439	/* read stats registers */
5440	adapter->stats.crcerrs += rd32(E1000_CRCERRS);
5441	adapter->stats.gprc += rd32(E1000_GPRC);
5442	adapter->stats.gorc += rd32(E1000_GORCL);
5443	rd32(E1000_GORCH); /* clear GORCL */
5444	adapter->stats.bprc += rd32(E1000_BPRC);
5445	adapter->stats.mprc += rd32(E1000_MPRC);
5446	adapter->stats.roc += rd32(E1000_ROC);
5447
5448	adapter->stats.prc64 += rd32(E1000_PRC64);
5449	adapter->stats.prc127 += rd32(E1000_PRC127);
5450	adapter->stats.prc255 += rd32(E1000_PRC255);
5451	adapter->stats.prc511 += rd32(E1000_PRC511);
5452	adapter->stats.prc1023 += rd32(E1000_PRC1023);
5453	adapter->stats.prc1522 += rd32(E1000_PRC1522);
5454	adapter->stats.symerrs += rd32(E1000_SYMERRS);
5455	adapter->stats.sec += rd32(E1000_SEC);
5456
5457	mpc = rd32(E1000_MPC);
5458	adapter->stats.mpc += mpc;
5459	net_stats->rx_fifo_errors += mpc;
5460	adapter->stats.scc += rd32(E1000_SCC);
5461	adapter->stats.ecol += rd32(E1000_ECOL);
5462	adapter->stats.mcc += rd32(E1000_MCC);
5463	adapter->stats.latecol += rd32(E1000_LATECOL);
5464	adapter->stats.dc += rd32(E1000_DC);
5465	adapter->stats.rlec += rd32(E1000_RLEC);
5466	adapter->stats.xonrxc += rd32(E1000_XONRXC);
5467	adapter->stats.xontxc += rd32(E1000_XONTXC);
5468	adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
5469	adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
5470	adapter->stats.fcruc += rd32(E1000_FCRUC);
5471	adapter->stats.gptc += rd32(E1000_GPTC);
5472	adapter->stats.gotc += rd32(E1000_GOTCL);
5473	rd32(E1000_GOTCH); /* clear GOTCL */
5474	adapter->stats.rnbc += rd32(E1000_RNBC);
5475	adapter->stats.ruc += rd32(E1000_RUC);
5476	adapter->stats.rfc += rd32(E1000_RFC);
5477	adapter->stats.rjc += rd32(E1000_RJC);
5478	adapter->stats.tor += rd32(E1000_TORH);
5479	adapter->stats.tot += rd32(E1000_TOTH);
5480	adapter->stats.tpr += rd32(E1000_TPR);
5481
5482	adapter->stats.ptc64 += rd32(E1000_PTC64);
5483	adapter->stats.ptc127 += rd32(E1000_PTC127);
5484	adapter->stats.ptc255 += rd32(E1000_PTC255);
5485	adapter->stats.ptc511 += rd32(E1000_PTC511);
5486	adapter->stats.ptc1023 += rd32(E1000_PTC1023);
5487	adapter->stats.ptc1522 += rd32(E1000_PTC1522);
5488
5489	adapter->stats.mptc += rd32(E1000_MPTC);
5490	adapter->stats.bptc += rd32(E1000_BPTC);
5491
5492	adapter->stats.tpt += rd32(E1000_TPT);
5493	adapter->stats.colc += rd32(E1000_COLC);
5494
5495	adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
5496	/* read internal phy specific stats */
5497	reg = rd32(E1000_CTRL_EXT);
5498	if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
5499		adapter->stats.rxerrc += rd32(E1000_RXERRC);
5500
5501		/* this stat has invalid values on i210/i211 */
5502		if ((hw->mac.type != e1000_i210) &&
5503		    (hw->mac.type != e1000_i211))
5504			adapter->stats.tncrs += rd32(E1000_TNCRS);
5505	}
5506
5507	adapter->stats.tsctc += rd32(E1000_TSCTC);
5508	adapter->stats.tsctfc += rd32(E1000_TSCTFC);
5509
5510	adapter->stats.iac += rd32(E1000_IAC);
5511	adapter->stats.icrxoc += rd32(E1000_ICRXOC);
5512	adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
5513	adapter->stats.icrxatc += rd32(E1000_ICRXATC);
5514	adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
5515	adapter->stats.ictxatc += rd32(E1000_ICTXATC);
5516	adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
5517	adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
5518	adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
5519
5520	/* Fill out the OS statistics structure */
5521	net_stats->multicast = adapter->stats.mprc;
5522	net_stats->collisions = adapter->stats.colc;
5523
5524	/* Rx Errors */
5525
5526	/* RLEC on some newer hardware can be incorrect so build
5527	 * our own version based on RUC and ROC
5528	 */
5529	net_stats->rx_errors = adapter->stats.rxerrc +
5530		adapter->stats.crcerrs + adapter->stats.algnerrc +
5531		adapter->stats.ruc + adapter->stats.roc +
5532		adapter->stats.cexterr;
5533	net_stats->rx_length_errors = adapter->stats.ruc +
5534				      adapter->stats.roc;
5535	net_stats->rx_crc_errors = adapter->stats.crcerrs;
5536	net_stats->rx_frame_errors = adapter->stats.algnerrc;
5537	net_stats->rx_missed_errors = adapter->stats.mpc;
5538
5539	/* Tx Errors */
5540	net_stats->tx_errors = adapter->stats.ecol +
5541			       adapter->stats.latecol;
5542	net_stats->tx_aborted_errors = adapter->stats.ecol;
5543	net_stats->tx_window_errors = adapter->stats.latecol;
5544	net_stats->tx_carrier_errors = adapter->stats.tncrs;
5545
5546	/* Tx Dropped needs to be maintained elsewhere */
5547
5548	/* Management Stats */
5549	adapter->stats.mgptc += rd32(E1000_MGTPTC);
5550	adapter->stats.mgprc += rd32(E1000_MGTPRC);
5551	adapter->stats.mgpdc += rd32(E1000_MGTPDC);
5552
5553	/* OS2BMC Stats */
5554	reg = rd32(E1000_MANC);
5555	if (reg & E1000_MANC_EN_BMC2OS) {
5556		adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
5557		adapter->stats.o2bspc += rd32(E1000_O2BSPC);
5558		adapter->stats.b2ospc += rd32(E1000_B2OSPC);
5559		adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
5560	}
5561}
5562
5563static void igb_tsync_interrupt(struct igb_adapter *adapter)
5564{
5565	struct e1000_hw *hw = &adapter->hw;
5566	struct ptp_clock_event event;
5567	struct timespec64 ts;
5568	u32 ack = 0, tsauxc, sec, nsec, tsicr = rd32(E1000_TSICR);
5569
5570	if (tsicr & TSINTR_SYS_WRAP) {
5571		event.type = PTP_CLOCK_PPS;
5572		if (adapter->ptp_caps.pps)
5573			ptp_clock_event(adapter->ptp_clock, &event);
5574		else
5575			dev_err(&adapter->pdev->dev, "unexpected SYS WRAP");
5576		ack |= TSINTR_SYS_WRAP;
5577	}
5578
5579	if (tsicr & E1000_TSICR_TXTS) {
5580		/* retrieve hardware timestamp */
5581		schedule_work(&adapter->ptp_tx_work);
5582		ack |= E1000_TSICR_TXTS;
5583	}
5584
5585	if (tsicr & TSINTR_TT0) {
5586		spin_lock(&adapter->tmreg_lock);
5587		ts = timespec64_add(adapter->perout[0].start,
5588				    adapter->perout[0].period);
5589		/* u32 conversion of tv_sec is safe until y2106 */
5590		wr32(E1000_TRGTTIML0, ts.tv_nsec);
5591		wr32(E1000_TRGTTIMH0, (u32)ts.tv_sec);
5592		tsauxc = rd32(E1000_TSAUXC);
5593		tsauxc |= TSAUXC_EN_TT0;
5594		wr32(E1000_TSAUXC, tsauxc);
5595		adapter->perout[0].start = ts;
5596		spin_unlock(&adapter->tmreg_lock);
5597		ack |= TSINTR_TT0;
5598	}
5599
5600	if (tsicr & TSINTR_TT1) {
5601		spin_lock(&adapter->tmreg_lock);
5602		ts = timespec64_add(adapter->perout[1].start,
5603				    adapter->perout[1].period);
5604		wr32(E1000_TRGTTIML1, ts.tv_nsec);
5605		wr32(E1000_TRGTTIMH1, (u32)ts.tv_sec);
5606		tsauxc = rd32(E1000_TSAUXC);
5607		tsauxc |= TSAUXC_EN_TT1;
5608		wr32(E1000_TSAUXC, tsauxc);
5609		adapter->perout[1].start = ts;
5610		spin_unlock(&adapter->tmreg_lock);
5611		ack |= TSINTR_TT1;
5612	}
5613
5614	if (tsicr & TSINTR_AUTT0) {
5615		nsec = rd32(E1000_AUXSTMPL0);
5616		sec  = rd32(E1000_AUXSTMPH0);
5617		event.type = PTP_CLOCK_EXTTS;
5618		event.index = 0;
5619		event.timestamp = sec * 1000000000ULL + nsec;
5620		ptp_clock_event(adapter->ptp_clock, &event);
5621		ack |= TSINTR_AUTT0;
5622	}
5623
5624	if (tsicr & TSINTR_AUTT1) {
5625		nsec = rd32(E1000_AUXSTMPL1);
5626		sec  = rd32(E1000_AUXSTMPH1);
5627		event.type = PTP_CLOCK_EXTTS;
5628		event.index = 1;
5629		event.timestamp = sec * 1000000000ULL + nsec;
5630		ptp_clock_event(adapter->ptp_clock, &event);
5631		ack |= TSINTR_AUTT1;
5632	}
5633
5634	/* acknowledge the interrupts */
5635	wr32(E1000_TSICR, ack);
5636}
5637
5638static irqreturn_t igb_msix_other(int irq, void *data)
5639{
5640	struct igb_adapter *adapter = data;
5641	struct e1000_hw *hw = &adapter->hw;
5642	u32 icr = rd32(E1000_ICR);
5643	/* reading ICR causes bit 31 of EICR to be cleared */
5644
5645	if (icr & E1000_ICR_DRSTA)
5646		schedule_work(&adapter->reset_task);
5647
5648	if (icr & E1000_ICR_DOUTSYNC) {
5649		/* HW is reporting DMA is out of sync */
5650		adapter->stats.doosync++;
5651		/* The DMA Out of Sync is also indication of a spoof event
5652		 * in IOV mode. Check the Wrong VM Behavior register to
5653		 * see if it is really a spoof event.
5654		 */
5655		igb_check_wvbr(adapter);
5656	}
5657
5658	/* Check for a mailbox event */
5659	if (icr & E1000_ICR_VMMB)
5660		igb_msg_task(adapter);
5661
5662	if (icr & E1000_ICR_LSC) {
5663		hw->mac.get_link_status = 1;
5664		/* guard against interrupt when we're going down */
5665		if (!test_bit(__IGB_DOWN, &adapter->state))
5666			mod_timer(&adapter->watchdog_timer, jiffies + 1);
5667	}
5668
5669	if (icr & E1000_ICR_TS)
5670		igb_tsync_interrupt(adapter);
5671
5672	wr32(E1000_EIMS, adapter->eims_other);
5673
5674	return IRQ_HANDLED;
5675}
5676
5677static void igb_write_itr(struct igb_q_vector *q_vector)
5678{
5679	struct igb_adapter *adapter = q_vector->adapter;
5680	u32 itr_val = q_vector->itr_val & 0x7FFC;
5681
5682	if (!q_vector->set_itr)
5683		return;
5684
5685	if (!itr_val)
5686		itr_val = 0x4;
5687
5688	if (adapter->hw.mac.type == e1000_82575)
5689		itr_val |= itr_val << 16;
5690	else
5691		itr_val |= E1000_EITR_CNT_IGNR;
5692
5693	writel(itr_val, q_vector->itr_register);
5694	q_vector->set_itr = 0;
5695}
5696
5697static irqreturn_t igb_msix_ring(int irq, void *data)
5698{
5699	struct igb_q_vector *q_vector = data;
5700
5701	/* Write the ITR value calculated from the previous interrupt. */
5702	igb_write_itr(q_vector);
5703
5704	napi_schedule(&q_vector->napi);
5705
5706	return IRQ_HANDLED;
5707}
5708
5709#ifdef CONFIG_IGB_DCA
5710static void igb_update_tx_dca(struct igb_adapter *adapter,
5711			      struct igb_ring *tx_ring,
5712			      int cpu)
5713{
5714	struct e1000_hw *hw = &adapter->hw;
5715	u32 txctrl = dca3_get_tag(tx_ring->dev, cpu);
5716
5717	if (hw->mac.type != e1000_82575)
5718		txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT;
5719
5720	/* We can enable relaxed ordering for reads, but not writes when
5721	 * DCA is enabled.  This is due to a known issue in some chipsets
5722	 * which will cause the DCA tag to be cleared.
5723	 */
5724	txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN |
5725		  E1000_DCA_TXCTRL_DATA_RRO_EN |
5726		  E1000_DCA_TXCTRL_DESC_DCA_EN;
5727
5728	wr32(E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl);
5729}
5730
5731static void igb_update_rx_dca(struct igb_adapter *adapter,
5732			      struct igb_ring *rx_ring,
5733			      int cpu)
5734{
5735	struct e1000_hw *hw = &adapter->hw;
5736	u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu);
5737
5738	if (hw->mac.type != e1000_82575)
5739		rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT;
5740
5741	/* We can enable relaxed ordering for reads, but not writes when
5742	 * DCA is enabled.  This is due to a known issue in some chipsets
5743	 * which will cause the DCA tag to be cleared.
5744	 */
5745	rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN |
5746		  E1000_DCA_RXCTRL_DESC_DCA_EN;
5747
5748	wr32(E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl);
5749}
5750
5751static void igb_update_dca(struct igb_q_vector *q_vector)
5752{
5753	struct igb_adapter *adapter = q_vector->adapter;
5754	int cpu = get_cpu();
5755
5756	if (q_vector->cpu == cpu)
5757		goto out_no_update;
5758
5759	if (q_vector->tx.ring)
5760		igb_update_tx_dca(adapter, q_vector->tx.ring, cpu);
5761
5762	if (q_vector->rx.ring)
5763		igb_update_rx_dca(adapter, q_vector->rx.ring, cpu);
5764
5765	q_vector->cpu = cpu;
5766out_no_update:
5767	put_cpu();
5768}
5769
5770static void igb_setup_dca(struct igb_adapter *adapter)
5771{
5772	struct e1000_hw *hw = &adapter->hw;
5773	int i;
5774
5775	if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
5776		return;
5777
5778	/* Always use CB2 mode, difference is masked in the CB driver. */
5779	wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
5780
5781	for (i = 0; i < adapter->num_q_vectors; i++) {
5782		adapter->q_vector[i]->cpu = -1;
5783		igb_update_dca(adapter->q_vector[i]);
5784	}
5785}
5786
5787static int __igb_notify_dca(struct device *dev, void *data)
5788{
5789	struct net_device *netdev = dev_get_drvdata(dev);
5790	struct igb_adapter *adapter = netdev_priv(netdev);
5791	struct pci_dev *pdev = adapter->pdev;
5792	struct e1000_hw *hw = &adapter->hw;
5793	unsigned long event = *(unsigned long *)data;
5794
5795	switch (event) {
5796	case DCA_PROVIDER_ADD:
5797		/* if already enabled, don't do it again */
5798		if (adapter->flags & IGB_FLAG_DCA_ENABLED)
5799			break;
5800		if (dca_add_requester(dev) == 0) {
5801			adapter->flags |= IGB_FLAG_DCA_ENABLED;
5802			dev_info(&pdev->dev, "DCA enabled\n");
5803			igb_setup_dca(adapter);
5804			break;
5805		}
5806		/* Fall Through since DCA is disabled. */
5807	case DCA_PROVIDER_REMOVE:
5808		if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
5809			/* without this a class_device is left
5810			 * hanging around in the sysfs model
5811			 */
5812			dca_remove_requester(dev);
5813			dev_info(&pdev->dev, "DCA disabled\n");
5814			adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
5815			wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
5816		}
5817		break;
5818	}
5819
5820	return 0;
5821}
5822
5823static int igb_notify_dca(struct notifier_block *nb, unsigned long event,
5824			  void *p)
5825{
5826	int ret_val;
5827
5828	ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event,
5829					 __igb_notify_dca);
5830
5831	return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
5832}
5833#endif /* CONFIG_IGB_DCA */
5834
5835#ifdef CONFIG_PCI_IOV
5836static int igb_vf_configure(struct igb_adapter *adapter, int vf)
5837{
5838	unsigned char mac_addr[ETH_ALEN];
5839
5840	eth_zero_addr(mac_addr);
5841	igb_set_vf_mac(adapter, vf, mac_addr);
5842
5843	/* By default spoof check is enabled for all VFs */
5844	adapter->vf_data[vf].spoofchk_enabled = true;
5845
5846	return 0;
5847}
5848
5849#endif
5850static void igb_ping_all_vfs(struct igb_adapter *adapter)
5851{
5852	struct e1000_hw *hw = &adapter->hw;
5853	u32 ping;
5854	int i;
5855
5856	for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
5857		ping = E1000_PF_CONTROL_MSG;
5858		if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
5859			ping |= E1000_VT_MSGTYPE_CTS;
5860		igb_write_mbx(hw, &ping, 1, i);
5861	}
5862}
5863
5864static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
5865{
5866	struct e1000_hw *hw = &adapter->hw;
5867	u32 vmolr = rd32(E1000_VMOLR(vf));
5868	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
5869
5870	vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC |
5871			    IGB_VF_FLAG_MULTI_PROMISC);
5872	vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
5873
5874	if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
5875		vmolr |= E1000_VMOLR_MPME;
5876		vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC;
5877		*msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
5878	} else {
5879		/* if we have hashes and we are clearing a multicast promisc
5880		 * flag we need to write the hashes to the MTA as this step
5881		 * was previously skipped
5882		 */
5883		if (vf_data->num_vf_mc_hashes > 30) {
5884			vmolr |= E1000_VMOLR_MPME;
5885		} else if (vf_data->num_vf_mc_hashes) {
5886			int j;
5887
5888			vmolr |= E1000_VMOLR_ROMPE;
5889			for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
5890				igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
5891		}
5892	}
5893
5894	wr32(E1000_VMOLR(vf), vmolr);
5895
5896	/* there are flags left unprocessed, likely not supported */
5897	if (*msgbuf & E1000_VT_MSGINFO_MASK)
5898		return -EINVAL;
5899
5900	return 0;
5901}
5902
5903static int igb_set_vf_multicasts(struct igb_adapter *adapter,
5904				  u32 *msgbuf, u32 vf)
5905{
5906	int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
5907	u16 *hash_list = (u16 *)&msgbuf[1];
5908	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
5909	int i;
5910
5911	/* salt away the number of multicast addresses assigned
5912	 * to this VF for later use to restore when the PF multi cast
5913	 * list changes
5914	 */
5915	vf_data->num_vf_mc_hashes = n;
5916
5917	/* only up to 30 hash values supported */
5918	if (n > 30)
5919		n = 30;
5920
5921	/* store the hashes for later use */
5922	for (i = 0; i < n; i++)
5923		vf_data->vf_mc_hashes[i] = hash_list[i];
5924
5925	/* Flush and reset the mta with the new values */
5926	igb_set_rx_mode(adapter->netdev);
5927
5928	return 0;
5929}
5930
5931static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
5932{
5933	struct e1000_hw *hw = &adapter->hw;
5934	struct vf_data_storage *vf_data;
5935	int i, j;
5936
5937	for (i = 0; i < adapter->vfs_allocated_count; i++) {
5938		u32 vmolr = rd32(E1000_VMOLR(i));
5939
5940		vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
5941
5942		vf_data = &adapter->vf_data[i];
5943
5944		if ((vf_data->num_vf_mc_hashes > 30) ||
5945		    (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
5946			vmolr |= E1000_VMOLR_MPME;
5947		} else if (vf_data->num_vf_mc_hashes) {
5948			vmolr |= E1000_VMOLR_ROMPE;
5949			for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
5950				igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
5951		}
5952		wr32(E1000_VMOLR(i), vmolr);
5953	}
5954}
5955
5956static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
5957{
5958	struct e1000_hw *hw = &adapter->hw;
5959	u32 pool_mask, vlvf_mask, i;
5960
5961	/* create mask for VF and other pools */
5962	pool_mask = E1000_VLVF_POOLSEL_MASK;
5963	vlvf_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
5964
5965	/* drop PF from pool bits */
5966	pool_mask &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT +
5967			     adapter->vfs_allocated_count));
5968
5969	/* Find the vlan filter for this id */
5970	for (i = E1000_VLVF_ARRAY_SIZE; i--;) {
5971		u32 vlvf = rd32(E1000_VLVF(i));
5972		u32 vfta_mask, vid, vfta;
5973
5974		/* remove the vf from the pool */
5975		if (!(vlvf & vlvf_mask))
5976			continue;
5977
5978		/* clear out bit from VLVF */
5979		vlvf ^= vlvf_mask;
5980
5981		/* if other pools are present, just remove ourselves */
5982		if (vlvf & pool_mask)
5983			goto update_vlvfb;
5984
5985		/* if PF is present, leave VFTA */
5986		if (vlvf & E1000_VLVF_POOLSEL_MASK)
5987			goto update_vlvf;
5988
5989		vid = vlvf & E1000_VLVF_VLANID_MASK;
5990		vfta_mask = 1 << (vid % 32);
5991
5992		/* clear bit from VFTA */
5993		vfta = adapter->shadow_vfta[vid / 32];
5994		if (vfta & vfta_mask)
5995			hw->mac.ops.write_vfta(hw, vid / 32, vfta ^ vfta_mask);
5996update_vlvf:
5997		/* clear pool selection enable */
5998		if (adapter->flags & IGB_FLAG_VLAN_PROMISC)
5999			vlvf &= E1000_VLVF_POOLSEL_MASK;
6000		else
6001			vlvf = 0;
6002update_vlvfb:
6003		/* clear pool bits */
6004		wr32(E1000_VLVF(i), vlvf);
6005	}
6006}
6007
6008static int igb_find_vlvf_entry(struct e1000_hw *hw, u32 vlan)
6009{
6010	u32 vlvf;
6011	int idx;
6012
6013	/* short cut the special case */
6014	if (vlan == 0)
6015		return 0;
6016
6017	/* Search for the VLAN id in the VLVF entries */
6018	for (idx = E1000_VLVF_ARRAY_SIZE; --idx;) {
6019		vlvf = rd32(E1000_VLVF(idx));
6020		if ((vlvf & VLAN_VID_MASK) == vlan)
6021			break;
6022	}
6023
6024	return idx;
6025}
6026
6027void igb_update_pf_vlvf(struct igb_adapter *adapter, u32 vid)
6028{
6029	struct e1000_hw *hw = &adapter->hw;
6030	u32 bits, pf_id;
6031	int idx;
6032
6033	idx = igb_find_vlvf_entry(hw, vid);
6034	if (!idx)
6035		return;
6036
6037	/* See if any other pools are set for this VLAN filter
6038	 * entry other than the PF.
6039	 */
6040	pf_id = adapter->vfs_allocated_count + E1000_VLVF_POOLSEL_SHIFT;
6041	bits = ~(1 << pf_id) & E1000_VLVF_POOLSEL_MASK;
6042	bits &= rd32(E1000_VLVF(idx));
6043
6044	/* Disable the filter so this falls into the default pool. */
6045	if (!bits) {
6046		if (adapter->flags & IGB_FLAG_VLAN_PROMISC)
6047			wr32(E1000_VLVF(idx), 1 << pf_id);
6048		else
6049			wr32(E1000_VLVF(idx), 0);
6050	}
6051}
6052
6053static s32 igb_set_vf_vlan(struct igb_adapter *adapter, u32 vid,
6054			   bool add, u32 vf)
6055{
6056	int pf_id = adapter->vfs_allocated_count;
6057	struct e1000_hw *hw = &adapter->hw;
6058	int err;
6059
6060	/* If VLAN overlaps with one the PF is currently monitoring make
6061	 * sure that we are able to allocate a VLVF entry.  This may be
6062	 * redundant but it guarantees PF will maintain visibility to
6063	 * the VLAN.
6064	 */
6065	if (add && test_bit(vid, adapter->active_vlans)) {
6066		err = igb_vfta_set(hw, vid, pf_id, true, false);
6067		if (err)
6068			return err;
6069	}
6070
6071	err = igb_vfta_set(hw, vid, vf, add, false);
6072
6073	if (add && !err)
6074		return err;
6075
6076	/* If we failed to add the VF VLAN or we are removing the VF VLAN
6077	 * we may need to drop the PF pool bit in order to allow us to free
6078	 * up the VLVF resources.
6079	 */
6080	if (test_bit(vid, adapter->active_vlans) ||
6081	    (adapter->flags & IGB_FLAG_VLAN_PROMISC))
6082		igb_update_pf_vlvf(adapter, vid);
6083
6084	return err;
6085}
6086
6087static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
6088{
6089	struct e1000_hw *hw = &adapter->hw;
6090
6091	if (vid)
6092		wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
6093	else
6094		wr32(E1000_VMVIR(vf), 0);
6095}
6096
6097static int igb_enable_port_vlan(struct igb_adapter *adapter, int vf,
6098				u16 vlan, u8 qos)
6099{
6100	int err;
6101
6102	err = igb_set_vf_vlan(adapter, vlan, true, vf);
6103	if (err)
6104		return err;
6105
6106	igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
6107	igb_set_vmolr(adapter, vf, !vlan);
6108
6109	/* revoke access to previous VLAN */
6110	if (vlan != adapter->vf_data[vf].pf_vlan)
6111		igb_set_vf_vlan(adapter, adapter->vf_data[vf].pf_vlan,
6112				false, vf);
6113
6114	adapter->vf_data[vf].pf_vlan = vlan;
6115	adapter->vf_data[vf].pf_qos = qos;
6116	igb_set_vf_vlan_strip(adapter, vf, true);
6117	dev_info(&adapter->pdev->dev,
6118		 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
6119	if (test_bit(__IGB_DOWN, &adapter->state)) {
6120		dev_warn(&adapter->pdev->dev,
6121			 "The VF VLAN has been set, but the PF device is not up.\n");
6122		dev_warn(&adapter->pdev->dev,
6123			 "Bring the PF device up before attempting to use the VF device.\n");
6124	}
6125
6126	return err;
6127}
6128
6129static int igb_disable_port_vlan(struct igb_adapter *adapter, int vf)
6130{
6131	/* Restore tagless access via VLAN 0 */
6132	igb_set_vf_vlan(adapter, 0, true, vf);
6133
6134	igb_set_vmvir(adapter, 0, vf);
6135	igb_set_vmolr(adapter, vf, true);
6136
6137	/* Remove any PF assigned VLAN */
6138	if (adapter->vf_data[vf].pf_vlan)
6139		igb_set_vf_vlan(adapter, adapter->vf_data[vf].pf_vlan,
6140				false, vf);
6141
6142	adapter->vf_data[vf].pf_vlan = 0;
6143	adapter->vf_data[vf].pf_qos = 0;
6144	igb_set_vf_vlan_strip(adapter, vf, false);
6145
6146	return 0;
6147}
6148
6149static int igb_ndo_set_vf_vlan(struct net_device *netdev,
6150			       int vf, u16 vlan, u8 qos)
6151{
6152	struct igb_adapter *adapter = netdev_priv(netdev);
6153
6154	if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
6155		return -EINVAL;
6156
6157	return (vlan || qos) ? igb_enable_port_vlan(adapter, vf, vlan, qos) :
6158			       igb_disable_port_vlan(adapter, vf);
6159}
6160
6161static int igb_set_vf_vlan_msg(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
6162{
6163	int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
6164	int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
6165	int ret;
6166
6167	if (adapter->vf_data[vf].pf_vlan)
6168		return -1;
6169
6170	/* VLAN 0 is a special case, don't allow it to be removed */
6171	if (!vid && !add)
6172		return 0;
6173
6174	ret = igb_set_vf_vlan(adapter, vid, !!add, vf);
6175	if (!ret)
6176		igb_set_vf_vlan_strip(adapter, vf, !!vid);
6177	return ret;
6178}
6179
6180static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
6181{
6182	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
6183
6184	/* clear flags - except flag that indicates PF has set the MAC */
6185	vf_data->flags &= IGB_VF_FLAG_PF_SET_MAC;
6186	vf_data->last_nack = jiffies;
6187
6188	/* reset vlans for device */
6189	igb_clear_vf_vfta(adapter, vf);
6190	igb_set_vf_vlan(adapter, vf_data->pf_vlan, true, vf);
6191	igb_set_vmvir(adapter, vf_data->pf_vlan |
6192			       (vf_data->pf_qos << VLAN_PRIO_SHIFT), vf);
6193	igb_set_vmolr(adapter, vf, !vf_data->pf_vlan);
6194	igb_set_vf_vlan_strip(adapter, vf, !!(vf_data->pf_vlan));
6195
6196	/* reset multicast table array for vf */
6197	adapter->vf_data[vf].num_vf_mc_hashes = 0;
6198
6199	/* Flush and reset the mta with the new values */
6200	igb_set_rx_mode(adapter->netdev);
6201}
6202
6203static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
6204{
6205	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
6206
6207	/* clear mac address as we were hotplug removed/added */
6208	if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
6209		eth_zero_addr(vf_mac);
6210
6211	/* process remaining reset events */
6212	igb_vf_reset(adapter, vf);
6213}
6214
6215static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
6216{
6217	struct e1000_hw *hw = &adapter->hw;
6218	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
6219	int rar_entry = hw->mac.rar_entry_count - (vf + 1);
6220	u32 reg, msgbuf[3];
6221	u8 *addr = (u8 *)(&msgbuf[1]);
6222
6223	/* process all the same items cleared in a function level reset */
6224	igb_vf_reset(adapter, vf);
6225
6226	/* set vf mac address */
6227	igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
6228
6229	/* enable transmit and receive for vf */
6230	reg = rd32(E1000_VFTE);
6231	wr32(E1000_VFTE, reg | (1 << vf));
6232	reg = rd32(E1000_VFRE);
6233	wr32(E1000_VFRE, reg | (1 << vf));
6234
6235	adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
6236
6237	/* reply to reset with ack and vf mac address */
6238	if (!is_zero_ether_addr(vf_mac)) {
6239		msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
6240		memcpy(addr, vf_mac, ETH_ALEN);
6241	} else {
6242		msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_NACK;
6243	}
6244	igb_write_mbx(hw, msgbuf, 3, vf);
6245}
6246
6247static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
6248{
6249	/* The VF MAC Address is stored in a packed array of bytes
6250	 * starting at the second 32 bit word of the msg array
6251	 */
6252	unsigned char *addr = (char *)&msg[1];
6253	int err = -1;
6254
6255	if (is_valid_ether_addr(addr))
6256		err = igb_set_vf_mac(adapter, vf, addr);
6257
6258	return err;
6259}
6260
6261static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
6262{
6263	struct e1000_hw *hw = &adapter->hw;
6264	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
6265	u32 msg = E1000_VT_MSGTYPE_NACK;
6266
6267	/* if device isn't clear to send it shouldn't be reading either */
6268	if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
6269	    time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
6270		igb_write_mbx(hw, &msg, 1, vf);
6271		vf_data->last_nack = jiffies;
6272	}
6273}
6274
6275static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
6276{
6277	struct pci_dev *pdev = adapter->pdev;
6278	u32 msgbuf[E1000_VFMAILBOX_SIZE];
6279	struct e1000_hw *hw = &adapter->hw;
6280	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
6281	s32 retval;
6282
6283	retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
6284
6285	if (retval) {
6286		/* if receive failed revoke VF CTS stats and restart init */
6287		dev_err(&pdev->dev, "Error receiving message from VF\n");
6288		vf_data->flags &= ~IGB_VF_FLAG_CTS;
6289		if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
6290			return;
6291		goto out;
6292	}
6293
6294	/* this is a message we already processed, do nothing */
6295	if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
6296		return;
6297
6298	/* until the vf completes a reset it should not be
6299	 * allowed to start any configuration.
6300	 */
6301	if (msgbuf[0] == E1000_VF_RESET) {
6302		igb_vf_reset_msg(adapter, vf);
6303		return;
6304	}
6305
6306	if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
6307		if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
6308			return;
6309		retval = -1;
6310		goto out;
6311	}
6312
6313	switch ((msgbuf[0] & 0xFFFF)) {
6314	case E1000_VF_SET_MAC_ADDR:
6315		retval = -EINVAL;
6316		if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
6317			retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
6318		else
6319			dev_warn(&pdev->dev,
6320				 "VF %d attempted to override administratively set MAC address\nReload the VF driver to resume operations\n",
6321				 vf);
6322		break;
6323	case E1000_VF_SET_PROMISC:
6324		retval = igb_set_vf_promisc(adapter, msgbuf, vf);
6325		break;
6326	case E1000_VF_SET_MULTICAST:
6327		retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
6328		break;
6329	case E1000_VF_SET_LPE:
6330		retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
6331		break;
6332	case E1000_VF_SET_VLAN:
6333		retval = -1;
6334		if (vf_data->pf_vlan)
6335			dev_warn(&pdev->dev,
6336				 "VF %d attempted to override administratively set VLAN tag\nReload the VF driver to resume operations\n",
6337				 vf);
6338		else
6339			retval = igb_set_vf_vlan_msg(adapter, msgbuf, vf);
6340		break;
6341	default:
6342		dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
6343		retval = -1;
6344		break;
6345	}
6346
6347	msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
6348out:
6349	/* notify the VF of the results of what it sent us */
6350	if (retval)
6351		msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
6352	else
6353		msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
6354
6355	igb_write_mbx(hw, msgbuf, 1, vf);
6356}
6357
6358static void igb_msg_task(struct igb_adapter *adapter)
6359{
6360	struct e1000_hw *hw = &adapter->hw;
6361	u32 vf;
6362
6363	for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
6364		/* process any reset requests */
6365		if (!igb_check_for_rst(hw, vf))
6366			igb_vf_reset_event(adapter, vf);
6367
6368		/* process any messages pending */
6369		if (!igb_check_for_msg(hw, vf))
6370			igb_rcv_msg_from_vf(adapter, vf);
6371
6372		/* process any acks */
6373		if (!igb_check_for_ack(hw, vf))
6374			igb_rcv_ack_from_vf(adapter, vf);
6375	}
6376}
6377
6378/**
6379 *  igb_set_uta - Set unicast filter table address
6380 *  @adapter: board private structure
6381 *  @set: boolean indicating if we are setting or clearing bits
6382 *
6383 *  The unicast table address is a register array of 32-bit registers.
6384 *  The table is meant to be used in a way similar to how the MTA is used
6385 *  however due to certain limitations in the hardware it is necessary to
6386 *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
6387 *  enable bit to allow vlan tag stripping when promiscuous mode is enabled
6388 **/
6389static void igb_set_uta(struct igb_adapter *adapter, bool set)
6390{
6391	struct e1000_hw *hw = &adapter->hw;
6392	u32 uta = set ? ~0 : 0;
6393	int i;
6394
6395	/* we only need to do this if VMDq is enabled */
6396	if (!adapter->vfs_allocated_count)
6397		return;
6398
6399	for (i = hw->mac.uta_reg_count; i--;)
6400		array_wr32(E1000_UTA, i, uta);
6401}
6402
6403/**
6404 *  igb_intr_msi - Interrupt Handler
6405 *  @irq: interrupt number
6406 *  @data: pointer to a network interface device structure
6407 **/
6408static irqreturn_t igb_intr_msi(int irq, void *data)
6409{
6410	struct igb_adapter *adapter = data;
6411	struct igb_q_vector *q_vector = adapter->q_vector[0];
6412	struct e1000_hw *hw = &adapter->hw;
6413	/* read ICR disables interrupts using IAM */
6414	u32 icr = rd32(E1000_ICR);
6415
6416	igb_write_itr(q_vector);
6417
6418	if (icr & E1000_ICR_DRSTA)
6419		schedule_work(&adapter->reset_task);
6420
6421	if (icr & E1000_ICR_DOUTSYNC) {
6422		/* HW is reporting DMA is out of sync */
6423		adapter->stats.doosync++;
6424	}
6425
6426	if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
6427		hw->mac.get_link_status = 1;
6428		if (!test_bit(__IGB_DOWN, &adapter->state))
6429			mod_timer(&adapter->watchdog_timer, jiffies + 1);
6430	}
6431
6432	if (icr & E1000_ICR_TS)
6433		igb_tsync_interrupt(adapter);
6434
6435	napi_schedule(&q_vector->napi);
6436
6437	return IRQ_HANDLED;
6438}
6439
6440/**
6441 *  igb_intr - Legacy Interrupt Handler
6442 *  @irq: interrupt number
6443 *  @data: pointer to a network interface device structure
6444 **/
6445static irqreturn_t igb_intr(int irq, void *data)
6446{
6447	struct igb_adapter *adapter = data;
6448	struct igb_q_vector *q_vector = adapter->q_vector[0];
6449	struct e1000_hw *hw = &adapter->hw;
6450	/* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
6451	 * need for the IMC write
6452	 */
6453	u32 icr = rd32(E1000_ICR);
6454
6455	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
6456	 * not set, then the adapter didn't send an interrupt
6457	 */
6458	if (!(icr & E1000_ICR_INT_ASSERTED))
6459		return IRQ_NONE;
6460
6461	igb_write_itr(q_vector);
6462
6463	if (icr & E1000_ICR_DRSTA)
6464		schedule_work(&adapter->reset_task);
6465
6466	if (icr & E1000_ICR_DOUTSYNC) {
6467		/* HW is reporting DMA is out of sync */
6468		adapter->stats.doosync++;
6469	}
6470
6471	if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
6472		hw->mac.get_link_status = 1;
6473		/* guard against interrupt when we're going down */
6474		if (!test_bit(__IGB_DOWN, &adapter->state))
6475			mod_timer(&adapter->watchdog_timer, jiffies + 1);
6476	}
6477
6478	if (icr & E1000_ICR_TS)
6479		igb_tsync_interrupt(adapter);
6480
6481	napi_schedule(&q_vector->napi);
6482
6483	return IRQ_HANDLED;
6484}
6485
6486static void igb_ring_irq_enable(struct igb_q_vector *q_vector)
6487{
6488	struct igb_adapter *adapter = q_vector->adapter;
6489	struct e1000_hw *hw = &adapter->hw;
6490
6491	if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) ||
6492	    (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) {
6493		if ((adapter->num_q_vectors == 1) && !adapter->vf_data)
6494			igb_set_itr(q_vector);
6495		else
6496			igb_update_ring_itr(q_vector);
6497	}
6498
6499	if (!test_bit(__IGB_DOWN, &adapter->state)) {
6500		if (adapter->flags & IGB_FLAG_HAS_MSIX)
6501			wr32(E1000_EIMS, q_vector->eims_value);
6502		else
6503			igb_irq_enable(adapter);
6504	}
6505}
6506
6507/**
6508 *  igb_poll - NAPI Rx polling callback
6509 *  @napi: napi polling structure
6510 *  @budget: count of how many packets we should handle
6511 **/
6512static int igb_poll(struct napi_struct *napi, int budget)
6513{
6514	struct igb_q_vector *q_vector = container_of(napi,
6515						     struct igb_q_vector,
6516						     napi);
6517	bool clean_complete = true;
6518	int work_done = 0;
6519
6520#ifdef CONFIG_IGB_DCA
6521	if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
6522		igb_update_dca(q_vector);
6523#endif
6524	if (q_vector->tx.ring)
6525		clean_complete = igb_clean_tx_irq(q_vector);
6526
6527	if (q_vector->rx.ring) {
6528		int cleaned = igb_clean_rx_irq(q_vector, budget);
6529
6530		work_done += cleaned;
6531		clean_complete &= (cleaned < budget);
6532	}
6533
6534	/* If all work not completed, return budget and keep polling */
6535	if (!clean_complete)
6536		return budget;
6537
6538	/* If not enough Rx work done, exit the polling mode */
6539	napi_complete_done(napi, work_done);
6540	igb_ring_irq_enable(q_vector);
6541
6542	return 0;
6543}
6544
6545/**
6546 *  igb_clean_tx_irq - Reclaim resources after transmit completes
6547 *  @q_vector: pointer to q_vector containing needed info
6548 *
6549 *  returns true if ring is completely cleaned
6550 **/
6551static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
6552{
6553	struct igb_adapter *adapter = q_vector->adapter;
6554	struct igb_ring *tx_ring = q_vector->tx.ring;
6555	struct igb_tx_buffer *tx_buffer;
6556	union e1000_adv_tx_desc *tx_desc;
6557	unsigned int total_bytes = 0, total_packets = 0;
6558	unsigned int budget = q_vector->tx.work_limit;
6559	unsigned int i = tx_ring->next_to_clean;
6560
6561	if (test_bit(__IGB_DOWN, &adapter->state))
6562		return true;
6563
6564	tx_buffer = &tx_ring->tx_buffer_info[i];
6565	tx_desc = IGB_TX_DESC(tx_ring, i);
6566	i -= tx_ring->count;
6567
6568	do {
6569		union e1000_adv_tx_desc *eop_desc = tx_buffer->next_to_watch;
6570
6571		/* if next_to_watch is not set then there is no work pending */
6572		if (!eop_desc)
6573			break;
6574
6575		/* prevent any other reads prior to eop_desc */
6576		read_barrier_depends();
6577
6578		/* if DD is not set pending work has not been completed */
6579		if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)))
6580			break;
6581
6582		/* clear next_to_watch to prevent false hangs */
6583		tx_buffer->next_to_watch = NULL;
6584
6585		/* update the statistics for this packet */
6586		total_bytes += tx_buffer->bytecount;
6587		total_packets += tx_buffer->gso_segs;
6588
6589		/* free the skb */
6590		dev_consume_skb_any(tx_buffer->skb);
6591
6592		/* unmap skb header data */
6593		dma_unmap_single(tx_ring->dev,
6594				 dma_unmap_addr(tx_buffer, dma),
6595				 dma_unmap_len(tx_buffer, len),
6596				 DMA_TO_DEVICE);
6597
6598		/* clear tx_buffer data */
6599		tx_buffer->skb = NULL;
6600		dma_unmap_len_set(tx_buffer, len, 0);
6601
6602		/* clear last DMA location and unmap remaining buffers */
6603		while (tx_desc != eop_desc) {
6604			tx_buffer++;
6605			tx_desc++;
6606			i++;
6607			if (unlikely(!i)) {
6608				i -= tx_ring->count;
6609				tx_buffer = tx_ring->tx_buffer_info;
6610				tx_desc = IGB_TX_DESC(tx_ring, 0);
6611			}
6612
6613			/* unmap any remaining paged data */
6614			if (dma_unmap_len(tx_buffer, len)) {
6615				dma_unmap_page(tx_ring->dev,
6616					       dma_unmap_addr(tx_buffer, dma),
6617					       dma_unmap_len(tx_buffer, len),
6618					       DMA_TO_DEVICE);
6619				dma_unmap_len_set(tx_buffer, len, 0);
6620			}
6621		}
6622
6623		/* move us one more past the eop_desc for start of next pkt */
6624		tx_buffer++;
6625		tx_desc++;
6626		i++;
6627		if (unlikely(!i)) {
6628			i -= tx_ring->count;
6629			tx_buffer = tx_ring->tx_buffer_info;
6630			tx_desc = IGB_TX_DESC(tx_ring, 0);
6631		}
6632
6633		/* issue prefetch for next Tx descriptor */
6634		prefetch(tx_desc);
6635
6636		/* update budget accounting */
6637		budget--;
6638	} while (likely(budget));
6639
6640	netdev_tx_completed_queue(txring_txq(tx_ring),
6641				  total_packets, total_bytes);
6642	i += tx_ring->count;
6643	tx_ring->next_to_clean = i;
6644	u64_stats_update_begin(&tx_ring->tx_syncp);
6645	tx_ring->tx_stats.bytes += total_bytes;
6646	tx_ring->tx_stats.packets += total_packets;
6647	u64_stats_update_end(&tx_ring->tx_syncp);
6648	q_vector->tx.total_bytes += total_bytes;
6649	q_vector->tx.total_packets += total_packets;
6650
6651	if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) {
6652		struct e1000_hw *hw = &adapter->hw;
6653
6654		/* Detect a transmit hang in hardware, this serializes the
6655		 * check with the clearing of time_stamp and movement of i
6656		 */
6657		clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags);
6658		if (tx_buffer->next_to_watch &&
6659		    time_after(jiffies, tx_buffer->time_stamp +
6660			       (adapter->tx_timeout_factor * HZ)) &&
6661		    !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
6662
6663			/* detected Tx unit hang */
6664			dev_err(tx_ring->dev,
6665				"Detected Tx Unit Hang\n"
6666				"  Tx Queue             <%d>\n"
6667				"  TDH                  <%x>\n"
6668				"  TDT                  <%x>\n"
6669				"  next_to_use          <%x>\n"
6670				"  next_to_clean        <%x>\n"
6671				"buffer_info[next_to_clean]\n"
6672				"  time_stamp           <%lx>\n"
6673				"  next_to_watch        <%p>\n"
6674				"  jiffies              <%lx>\n"
6675				"  desc.status          <%x>\n",
6676				tx_ring->queue_index,
6677				rd32(E1000_TDH(tx_ring->reg_idx)),
6678				readl(tx_ring->tail),
6679				tx_ring->next_to_use,
6680				tx_ring->next_to_clean,
6681				tx_buffer->time_stamp,
6682				tx_buffer->next_to_watch,
6683				jiffies,
6684				tx_buffer->next_to_watch->wb.status);
6685			netif_stop_subqueue(tx_ring->netdev,
6686					    tx_ring->queue_index);
6687
6688			/* we are about to reset, no point in enabling stuff */
6689			return true;
6690		}
6691	}
6692
6693#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
6694	if (unlikely(total_packets &&
6695	    netif_carrier_ok(tx_ring->netdev) &&
6696	    igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) {
6697		/* Make sure that anybody stopping the queue after this
6698		 * sees the new next_to_clean.
6699		 */
6700		smp_mb();
6701		if (__netif_subqueue_stopped(tx_ring->netdev,
6702					     tx_ring->queue_index) &&
6703		    !(test_bit(__IGB_DOWN, &adapter->state))) {
6704			netif_wake_subqueue(tx_ring->netdev,
6705					    tx_ring->queue_index);
6706
6707			u64_stats_update_begin(&tx_ring->tx_syncp);
6708			tx_ring->tx_stats.restart_queue++;
6709			u64_stats_update_end(&tx_ring->tx_syncp);
6710		}
6711	}
6712
6713	return !!budget;
6714}
6715
6716/**
6717 *  igb_reuse_rx_page - page flip buffer and store it back on the ring
6718 *  @rx_ring: rx descriptor ring to store buffers on
6719 *  @old_buff: donor buffer to have page reused
6720 *
6721 *  Synchronizes page for reuse by the adapter
6722 **/
6723static void igb_reuse_rx_page(struct igb_ring *rx_ring,
6724			      struct igb_rx_buffer *old_buff)
6725{
6726	struct igb_rx_buffer *new_buff;
6727	u16 nta = rx_ring->next_to_alloc;
6728
6729	new_buff = &rx_ring->rx_buffer_info[nta];
6730
6731	/* update, and store next to alloc */
6732	nta++;
6733	rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
6734
6735	/* transfer page from old buffer to new buffer */
6736	*new_buff = *old_buff;
6737
6738	/* sync the buffer for use by the device */
6739	dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma,
6740					 old_buff->page_offset,
6741					 IGB_RX_BUFSZ,
6742					 DMA_FROM_DEVICE);
6743}
6744
6745static inline bool igb_page_is_reserved(struct page *page)
6746{
6747	return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
6748}
6749
6750static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
6751				  struct page *page,
6752				  unsigned int truesize)
6753{
6754	/* avoid re-using remote pages */
6755	if (unlikely(igb_page_is_reserved(page)))
6756		return false;
6757
6758#if (PAGE_SIZE < 8192)
6759	/* if we are only owner of page we can reuse it */
6760	if (unlikely(page_count(page) != 1))
6761		return false;
6762
6763	/* flip page offset to other buffer */
6764	rx_buffer->page_offset ^= IGB_RX_BUFSZ;
6765#else
6766	/* move offset up to the next cache line */
6767	rx_buffer->page_offset += truesize;
6768
6769	if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ))
6770		return false;
6771#endif
6772
6773	/* Even if we own the page, we are not allowed to use atomic_set()
6774	 * This would break get_page_unless_zero() users.
6775	 */
6776	page_ref_inc(page);
6777
6778	return true;
6779}
6780
6781/**
6782 *  igb_add_rx_frag - Add contents of Rx buffer to sk_buff
6783 *  @rx_ring: rx descriptor ring to transact packets on
6784 *  @rx_buffer: buffer containing page to add
6785 *  @rx_desc: descriptor containing length of buffer written by hardware
6786 *  @skb: sk_buff to place the data into
6787 *
6788 *  This function will add the data contained in rx_buffer->page to the skb.
6789 *  This is done either through a direct copy if the data in the buffer is
6790 *  less than the skb header size, otherwise it will just attach the page as
6791 *  a frag to the skb.
6792 *
6793 *  The function will then update the page offset if necessary and return
6794 *  true if the buffer can be reused by the adapter.
6795 **/
6796static bool igb_add_rx_frag(struct igb_ring *rx_ring,
6797			    struct igb_rx_buffer *rx_buffer,
6798			    union e1000_adv_rx_desc *rx_desc,
6799			    struct sk_buff *skb)
6800{
6801	struct page *page = rx_buffer->page;
6802	unsigned char *va = page_address(page) + rx_buffer->page_offset;
6803	unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
6804#if (PAGE_SIZE < 8192)
6805	unsigned int truesize = IGB_RX_BUFSZ;
6806#else
6807	unsigned int truesize = SKB_DATA_ALIGN(size);
6808#endif
6809	unsigned int pull_len;
6810
6811	if (unlikely(skb_is_nonlinear(skb)))
6812		goto add_tail_frag;
6813
6814	if (unlikely(igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP))) {
6815		igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb);
6816		va += IGB_TS_HDR_LEN;
6817		size -= IGB_TS_HDR_LEN;
6818	}
6819
6820	if (likely(size <= IGB_RX_HDR_LEN)) {
6821		memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
6822
6823		/* page is not reserved, we can reuse buffer as-is */
6824		if (likely(!igb_page_is_reserved(page)))
6825			return true;
6826
6827		/* this page cannot be reused so discard it */
6828		__free_page(page);
6829		return false;
6830	}
6831
6832	/* we need the header to contain the greater of either ETH_HLEN or
6833	 * 60 bytes if the skb->len is less than 60 for skb_pad.
6834	 */
6835	pull_len = eth_get_headlen(va, IGB_RX_HDR_LEN);
6836
6837	/* align pull length to size of long to optimize memcpy performance */
6838	memcpy(__skb_put(skb, pull_len), va, ALIGN(pull_len, sizeof(long)));
6839
6840	/* update all of the pointers */
6841	va += pull_len;
6842	size -= pull_len;
6843
6844add_tail_frag:
6845	skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
6846			(unsigned long)va & ~PAGE_MASK, size, truesize);
6847
6848	return igb_can_reuse_rx_page(rx_buffer, page, truesize);
6849}
6850
6851static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring,
6852					   union e1000_adv_rx_desc *rx_desc,
6853					   struct sk_buff *skb)
6854{
6855	struct igb_rx_buffer *rx_buffer;
6856	struct page *page;
6857
6858	rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
6859	page = rx_buffer->page;
6860	prefetchw(page);
6861
6862	if (likely(!skb)) {
6863		void *page_addr = page_address(page) +
6864				  rx_buffer->page_offset;
6865
6866		/* prefetch first cache line of first page */
6867		prefetch(page_addr);
6868#if L1_CACHE_BYTES < 128
6869		prefetch(page_addr + L1_CACHE_BYTES);
6870#endif
6871
6872		/* allocate a skb to store the frags */
6873		skb = napi_alloc_skb(&rx_ring->q_vector->napi, IGB_RX_HDR_LEN);
6874		if (unlikely(!skb)) {
6875			rx_ring->rx_stats.alloc_failed++;
6876			return NULL;
6877		}
6878
6879		/* we will be copying header into skb->data in
6880		 * pskb_may_pull so it is in our interest to prefetch
6881		 * it now to avoid a possible cache miss
6882		 */
6883		prefetchw(skb->data);
6884	}
6885
6886	/* we are reusing so sync this buffer for CPU use */
6887	dma_sync_single_range_for_cpu(rx_ring->dev,
6888				      rx_buffer->dma,
6889				      rx_buffer->page_offset,
6890				      IGB_RX_BUFSZ,
6891				      DMA_FROM_DEVICE);
6892
6893	/* pull page into skb */
6894	if (igb_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
6895		/* hand second half of page back to the ring */
6896		igb_reuse_rx_page(rx_ring, rx_buffer);
6897	} else {
6898		/* we are not reusing the buffer so unmap it */
6899		dma_unmap_page(rx_ring->dev, rx_buffer->dma,
6900			       PAGE_SIZE, DMA_FROM_DEVICE);
6901	}
6902
6903	/* clear contents of rx_buffer */
6904	rx_buffer->page = NULL;
6905
6906	return skb;
6907}
6908
6909static inline void igb_rx_checksum(struct igb_ring *ring,
6910				   union e1000_adv_rx_desc *rx_desc,
6911				   struct sk_buff *skb)
6912{
6913	skb_checksum_none_assert(skb);
6914
6915	/* Ignore Checksum bit is set */
6916	if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM))
6917		return;
6918
6919	/* Rx checksum disabled via ethtool */
6920	if (!(ring->netdev->features & NETIF_F_RXCSUM))
6921		return;
6922
6923	/* TCP/UDP checksum error bit is set */
6924	if (igb_test_staterr(rx_desc,
6925			     E1000_RXDEXT_STATERR_TCPE |
6926			     E1000_RXDEXT_STATERR_IPE)) {
6927		/* work around errata with sctp packets where the TCPE aka
6928		 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
6929		 * packets, (aka let the stack check the crc32c)
6930		 */
6931		if (!((skb->len == 60) &&
6932		      test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) {
6933			u64_stats_update_begin(&ring->rx_syncp);
6934			ring->rx_stats.csum_err++;
6935			u64_stats_update_end(&ring->rx_syncp);
6936		}
6937		/* let the stack verify checksum errors */
6938		return;
6939	}
6940	/* It must be a TCP or UDP packet with a valid checksum */
6941	if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS |
6942				      E1000_RXD_STAT_UDPCS))
6943		skb->ip_summed = CHECKSUM_UNNECESSARY;
6944
6945	dev_dbg(ring->dev, "cksum success: bits %08X\n",
6946		le32_to_cpu(rx_desc->wb.upper.status_error));
6947}
6948
6949static inline void igb_rx_hash(struct igb_ring *ring,
6950			       union e1000_adv_rx_desc *rx_desc,
6951			       struct sk_buff *skb)
6952{
6953	if (ring->netdev->features & NETIF_F_RXHASH)
6954		skb_set_hash(skb,
6955			     le32_to_cpu(rx_desc->wb.lower.hi_dword.rss),
6956			     PKT_HASH_TYPE_L3);
6957}
6958
6959/**
6960 *  igb_is_non_eop - process handling of non-EOP buffers
6961 *  @rx_ring: Rx ring being processed
6962 *  @rx_desc: Rx descriptor for current buffer
6963 *  @skb: current socket buffer containing buffer in progress
6964 *
6965 *  This function updates next to clean.  If the buffer is an EOP buffer
6966 *  this function exits returning false, otherwise it will place the
6967 *  sk_buff in the next buffer to be chained and return true indicating
6968 *  that this is in fact a non-EOP buffer.
6969 **/
6970static bool igb_is_non_eop(struct igb_ring *rx_ring,
6971			   union e1000_adv_rx_desc *rx_desc)
6972{
6973	u32 ntc = rx_ring->next_to_clean + 1;
6974
6975	/* fetch, update, and store next to clean */
6976	ntc = (ntc < rx_ring->count) ? ntc : 0;
6977	rx_ring->next_to_clean = ntc;
6978
6979	prefetch(IGB_RX_DESC(rx_ring, ntc));
6980
6981	if (likely(igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)))
6982		return false;
6983
6984	return true;
6985}
6986
6987/**
6988 *  igb_cleanup_headers - Correct corrupted or empty headers
6989 *  @rx_ring: rx descriptor ring packet is being transacted on
6990 *  @rx_desc: pointer to the EOP Rx descriptor
6991 *  @skb: pointer to current skb being fixed
6992 *
6993 *  Address the case where we are pulling data in on pages only
6994 *  and as such no data is present in the skb header.
6995 *
6996 *  In addition if skb is not at least 60 bytes we need to pad it so that
6997 *  it is large enough to qualify as a valid Ethernet frame.
6998 *
6999 *  Returns true if an error was encountered and skb was freed.
7000 **/
7001static bool igb_cleanup_headers(struct igb_ring *rx_ring,
7002				union e1000_adv_rx_desc *rx_desc,
7003				struct sk_buff *skb)
7004{
7005	if (unlikely((igb_test_staterr(rx_desc,
7006				       E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) {
7007		struct net_device *netdev = rx_ring->netdev;
7008		if (!(netdev->features & NETIF_F_RXALL)) {
7009			dev_kfree_skb_any(skb);
7010			return true;
7011		}
7012	}
7013
7014	/* if eth_skb_pad returns an error the skb was freed */
7015	if (eth_skb_pad(skb))
7016		return true;
7017
7018	return false;
7019}
7020
7021/**
7022 *  igb_process_skb_fields - Populate skb header fields from Rx descriptor
7023 *  @rx_ring: rx descriptor ring packet is being transacted on
7024 *  @rx_desc: pointer to the EOP Rx descriptor
7025 *  @skb: pointer to current skb being populated
7026 *
7027 *  This function checks the ring, descriptor, and packet information in
7028 *  order to populate the hash, checksum, VLAN, timestamp, protocol, and
7029 *  other fields within the skb.
7030 **/
7031static void igb_process_skb_fields(struct igb_ring *rx_ring,
7032				   union e1000_adv_rx_desc *rx_desc,
7033				   struct sk_buff *skb)
7034{
7035	struct net_device *dev = rx_ring->netdev;
7036
7037	igb_rx_hash(rx_ring, rx_desc, skb);
7038
7039	igb_rx_checksum(rx_ring, rx_desc, skb);
7040
7041	if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TS) &&
7042	    !igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP))
7043		igb_ptp_rx_rgtstamp(rx_ring->q_vector, skb);
7044
7045	if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
7046	    igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) {
7047		u16 vid;
7048
7049		if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
7050		    test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags))
7051			vid = be16_to_cpu(rx_desc->wb.upper.vlan);
7052		else
7053			vid = le16_to_cpu(rx_desc->wb.upper.vlan);
7054
7055		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
7056	}
7057
7058	skb_record_rx_queue(skb, rx_ring->queue_index);
7059
7060	skb->protocol = eth_type_trans(skb, rx_ring->netdev);
7061}
7062
7063static int igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
7064{
7065	struct igb_ring *rx_ring = q_vector->rx.ring;
7066	struct sk_buff *skb = rx_ring->skb;
7067	unsigned int total_bytes = 0, total_packets = 0;
7068	u16 cleaned_count = igb_desc_unused(rx_ring);
7069
7070	while (likely(total_packets < budget)) {
7071		union e1000_adv_rx_desc *rx_desc;
7072
7073		/* return some buffers to hardware, one at a time is too slow */
7074		if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
7075			igb_alloc_rx_buffers(rx_ring, cleaned_count);
7076			cleaned_count = 0;
7077		}
7078
7079		rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean);
7080
7081		if (!rx_desc->wb.upper.status_error)
7082			break;
7083
7084		/* This memory barrier is needed to keep us from reading
7085		 * any other fields out of the rx_desc until we know the
7086		 * descriptor has been written back
7087		 */
7088		dma_rmb();
7089
7090		/* retrieve a buffer from the ring */
7091		skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb);
7092
7093		/* exit if we failed to retrieve a buffer */
7094		if (!skb)
7095			break;
7096
7097		cleaned_count++;
7098
7099		/* fetch next buffer in frame if non-eop */
7100		if (igb_is_non_eop(rx_ring, rx_desc))
7101			continue;
7102
7103		/* verify the packet layout is correct */
7104		if (igb_cleanup_headers(rx_ring, rx_desc, skb)) {
7105			skb = NULL;
7106			continue;
7107		}
7108
7109		/* probably a little skewed due to removing CRC */
7110		total_bytes += skb->len;
7111
7112		/* populate checksum, timestamp, VLAN, and protocol */
7113		igb_process_skb_fields(rx_ring, rx_desc, skb);
7114
7115		napi_gro_receive(&q_vector->napi, skb);
7116
7117		/* reset skb pointer */
7118		skb = NULL;
7119
7120		/* update budget accounting */
7121		total_packets++;
7122	}
7123
7124	/* place incomplete frames back on ring for completion */
7125	rx_ring->skb = skb;
7126
7127	u64_stats_update_begin(&rx_ring->rx_syncp);
7128	rx_ring->rx_stats.packets += total_packets;
7129	rx_ring->rx_stats.bytes += total_bytes;
7130	u64_stats_update_end(&rx_ring->rx_syncp);
7131	q_vector->rx.total_packets += total_packets;
7132	q_vector->rx.total_bytes += total_bytes;
7133
7134	if (cleaned_count)
7135		igb_alloc_rx_buffers(rx_ring, cleaned_count);
7136
7137	return total_packets;
7138}
7139
7140static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
7141				  struct igb_rx_buffer *bi)
7142{
7143	struct page *page = bi->page;
7144	dma_addr_t dma;
7145
7146	/* since we are recycling buffers we should seldom need to alloc */
7147	if (likely(page))
7148		return true;
7149
7150	/* alloc new page for storage */
7151	page = dev_alloc_page();
7152	if (unlikely(!page)) {
7153		rx_ring->rx_stats.alloc_failed++;
7154		return false;
7155	}
7156
7157	/* map page for use */
7158	dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
7159
7160	/* if mapping failed free memory back to system since
7161	 * there isn't much point in holding memory we can't use
7162	 */
7163	if (dma_mapping_error(rx_ring->dev, dma)) {
7164		__free_page(page);
7165
7166		rx_ring->rx_stats.alloc_failed++;
7167		return false;
7168	}
7169
7170	bi->dma = dma;
7171	bi->page = page;
7172	bi->page_offset = 0;
7173
7174	return true;
7175}
7176
7177/**
7178 *  igb_alloc_rx_buffers - Replace used receive buffers; packet split
7179 *  @adapter: address of board private structure
7180 **/
7181void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
7182{
7183	union e1000_adv_rx_desc *rx_desc;
7184	struct igb_rx_buffer *bi;
7185	u16 i = rx_ring->next_to_use;
7186
7187	/* nothing to do */
7188	if (!cleaned_count)
7189		return;
7190
7191	rx_desc = IGB_RX_DESC(rx_ring, i);
7192	bi = &rx_ring->rx_buffer_info[i];
7193	i -= rx_ring->count;
7194
7195	do {
7196		if (!igb_alloc_mapped_page(rx_ring, bi))
7197			break;
7198
7199		/* Refresh the desc even if buffer_addrs didn't change
7200		 * because each write-back erases this info.
7201		 */
7202		rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);
7203
7204		rx_desc++;
7205		bi++;
7206		i++;
7207		if (unlikely(!i)) {
7208			rx_desc = IGB_RX_DESC(rx_ring, 0);
7209			bi = rx_ring->rx_buffer_info;
7210			i -= rx_ring->count;
7211		}
7212
7213		/* clear the status bits for the next_to_use descriptor */
7214		rx_desc->wb.upper.status_error = 0;
7215
7216		cleaned_count--;
7217	} while (cleaned_count);
7218
7219	i += rx_ring->count;
7220
7221	if (rx_ring->next_to_use != i) {
7222		/* record the next descriptor to use */
7223		rx_ring->next_to_use = i;
7224
7225		/* update next to alloc since we have filled the ring */
7226		rx_ring->next_to_alloc = i;
7227
7228		/* Force memory writes to complete before letting h/w
7229		 * know there are new descriptors to fetch.  (Only
7230		 * applicable for weak-ordered memory model archs,
7231		 * such as IA-64).
7232		 */
7233		wmb();
7234		writel(i, rx_ring->tail);
7235	}
7236}
7237
7238/**
7239 * igb_mii_ioctl -
7240 * @netdev:
7241 * @ifreq:
7242 * @cmd:
7243 **/
7244static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
7245{
7246	struct igb_adapter *adapter = netdev_priv(netdev);
7247	struct mii_ioctl_data *data = if_mii(ifr);
7248
7249	if (adapter->hw.phy.media_type != e1000_media_type_copper)
7250		return -EOPNOTSUPP;
7251
7252	switch (cmd) {
7253	case SIOCGMIIPHY:
7254		data->phy_id = adapter->hw.phy.addr;
7255		break;
7256	case SIOCGMIIREG:
7257		if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
7258				     &data->val_out))
7259			return -EIO;
7260		break;
7261	case SIOCSMIIREG:
7262	default:
7263		return -EOPNOTSUPP;
7264	}
7265	return 0;
7266}
7267
7268/**
7269 * igb_ioctl -
7270 * @netdev:
7271 * @ifreq:
7272 * @cmd:
7273 **/
7274static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
7275{
7276	switch (cmd) {
7277	case SIOCGMIIPHY:
7278	case SIOCGMIIREG:
7279	case SIOCSMIIREG:
7280		return igb_mii_ioctl(netdev, ifr, cmd);
7281	case SIOCGHWTSTAMP:
7282		return igb_ptp_get_ts_config(netdev, ifr);
7283	case SIOCSHWTSTAMP:
7284		return igb_ptp_set_ts_config(netdev, ifr);
7285	default:
7286		return -EOPNOTSUPP;
7287	}
7288}
7289
7290void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
7291{
7292	struct igb_adapter *adapter = hw->back;
7293
7294	pci_read_config_word(adapter->pdev, reg, value);
7295}
7296
7297void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
7298{
7299	struct igb_adapter *adapter = hw->back;
7300
7301	pci_write_config_word(adapter->pdev, reg, *value);
7302}
7303
7304s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
7305{
7306	struct igb_adapter *adapter = hw->back;
7307
7308	if (pcie_capability_read_word(adapter->pdev, reg, value))
7309		return -E1000_ERR_CONFIG;
7310
7311	return 0;
7312}
7313
7314s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
7315{
7316	struct igb_adapter *adapter = hw->back;
7317
7318	if (pcie_capability_write_word(adapter->pdev, reg, *value))
7319		return -E1000_ERR_CONFIG;
7320
7321	return 0;
7322}
7323
7324static void igb_vlan_mode(struct net_device *netdev, netdev_features_t features)
7325{
7326	struct igb_adapter *adapter = netdev_priv(netdev);
7327	struct e1000_hw *hw = &adapter->hw;
7328	u32 ctrl, rctl;
7329	bool enable = !!(features & NETIF_F_HW_VLAN_CTAG_RX);
7330
7331	if (enable) {
7332		/* enable VLAN tag insert/strip */
7333		ctrl = rd32(E1000_CTRL);
7334		ctrl |= E1000_CTRL_VME;
7335		wr32(E1000_CTRL, ctrl);
7336
7337		/* Disable CFI check */
7338		rctl = rd32(E1000_RCTL);
7339		rctl &= ~E1000_RCTL_CFIEN;
7340		wr32(E1000_RCTL, rctl);
7341	} else {
7342		/* disable VLAN tag insert/strip */
7343		ctrl = rd32(E1000_CTRL);
7344		ctrl &= ~E1000_CTRL_VME;
7345		wr32(E1000_CTRL, ctrl);
7346	}
7347
7348	igb_set_vf_vlan_strip(adapter, adapter->vfs_allocated_count, enable);
7349}
7350
7351static int igb_vlan_rx_add_vid(struct net_device *netdev,
7352			       __be16 proto, u16 vid)
7353{
7354	struct igb_adapter *adapter = netdev_priv(netdev);
7355	struct e1000_hw *hw = &adapter->hw;
7356	int pf_id = adapter->vfs_allocated_count;
7357
7358	/* add the filter since PF can receive vlans w/o entry in vlvf */
7359	if (!vid || !(adapter->flags & IGB_FLAG_VLAN_PROMISC))
7360		igb_vfta_set(hw, vid, pf_id, true, !!vid);
7361
7362	set_bit(vid, adapter->active_vlans);
7363
7364	return 0;
7365}
7366
7367static int igb_vlan_rx_kill_vid(struct net_device *netdev,
7368				__be16 proto, u16 vid)
7369{
7370	struct igb_adapter *adapter = netdev_priv(netdev);
7371	int pf_id = adapter->vfs_allocated_count;
7372	struct e1000_hw *hw = &adapter->hw;
7373
7374	/* remove VID from filter table */
7375	if (vid && !(adapter->flags & IGB_FLAG_VLAN_PROMISC))
7376		igb_vfta_set(hw, vid, pf_id, false, true);
7377
7378	clear_bit(vid, adapter->active_vlans);
7379
7380	return 0;
7381}
7382
7383static void igb_restore_vlan(struct igb_adapter *adapter)
7384{
7385	u16 vid = 1;
7386
7387	igb_vlan_mode(adapter->netdev, adapter->netdev->features);
7388	igb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0);
7389
7390	for_each_set_bit_from(vid, adapter->active_vlans, VLAN_N_VID)
7391		igb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
7392}
7393
7394int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
7395{
7396	struct pci_dev *pdev = adapter->pdev;
7397	struct e1000_mac_info *mac = &adapter->hw.mac;
7398
7399	mac->autoneg = 0;
7400
7401	/* Make sure dplx is at most 1 bit and lsb of speed is not set
7402	 * for the switch() below to work
7403	 */
7404	if ((spd & 1) || (dplx & ~1))
7405		goto err_inval;
7406
7407	/* Fiber NIC's only allow 1000 gbps Full duplex
7408	 * and 100Mbps Full duplex for 100baseFx sfp
7409	 */
7410	if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) {
7411		switch (spd + dplx) {
7412		case SPEED_10 + DUPLEX_HALF:
7413		case SPEED_10 + DUPLEX_FULL:
7414		case SPEED_100 + DUPLEX_HALF:
7415			goto err_inval;
7416		default:
7417			break;
7418		}
7419	}
7420
7421	switch (spd + dplx) {
7422	case SPEED_10 + DUPLEX_HALF:
7423		mac->forced_speed_duplex = ADVERTISE_10_HALF;
7424		break;
7425	case SPEED_10 + DUPLEX_FULL:
7426		mac->forced_speed_duplex = ADVERTISE_10_FULL;
7427		break;
7428	case SPEED_100 + DUPLEX_HALF:
7429		mac->forced_speed_duplex = ADVERTISE_100_HALF;
7430		break;
7431	case SPEED_100 + DUPLEX_FULL:
7432		mac->forced_speed_duplex = ADVERTISE_100_FULL;
7433		break;
7434	case SPEED_1000 + DUPLEX_FULL:
7435		mac->autoneg = 1;
7436		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
7437		break;
7438	case SPEED_1000 + DUPLEX_HALF: /* not supported */
7439	default:
7440		goto err_inval;
7441	}
7442
7443	/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
7444	adapter->hw.phy.mdix = AUTO_ALL_MODES;
7445
7446	return 0;
7447
7448err_inval:
7449	dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
7450	return -EINVAL;
7451}
7452
7453static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
7454			  bool runtime)
7455{
7456	struct net_device *netdev = pci_get_drvdata(pdev);
7457	struct igb_adapter *adapter = netdev_priv(netdev);
7458	struct e1000_hw *hw = &adapter->hw;
7459	u32 ctrl, rctl, status;
7460	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
7461#ifdef CONFIG_PM
7462	int retval = 0;
7463#endif
7464
7465	netif_device_detach(netdev);
7466
7467	if (netif_running(netdev))
7468		__igb_close(netdev, true);
7469
7470	igb_clear_interrupt_scheme(adapter);
7471
7472#ifdef CONFIG_PM
7473	retval = pci_save_state(pdev);
7474	if (retval)
7475		return retval;
7476#endif
7477
7478	status = rd32(E1000_STATUS);
7479	if (status & E1000_STATUS_LU)
7480		wufc &= ~E1000_WUFC_LNKC;
7481
7482	if (wufc) {
7483		igb_setup_rctl(adapter);
7484		igb_set_rx_mode(netdev);
7485
7486		/* turn on all-multi mode if wake on multicast is enabled */
7487		if (wufc & E1000_WUFC_MC) {
7488			rctl = rd32(E1000_RCTL);
7489			rctl |= E1000_RCTL_MPE;
7490			wr32(E1000_RCTL, rctl);
7491		}
7492
7493		ctrl = rd32(E1000_CTRL);
7494		/* advertise wake from D3Cold */
7495		#define E1000_CTRL_ADVD3WUC 0x00100000
7496		/* phy power management enable */
7497		#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
7498		ctrl |= E1000_CTRL_ADVD3WUC;
7499		wr32(E1000_CTRL, ctrl);
7500
7501		/* Allow time for pending master requests to run */
7502		igb_disable_pcie_master(hw);
7503
7504		wr32(E1000_WUC, E1000_WUC_PME_EN);
7505		wr32(E1000_WUFC, wufc);
7506	} else {
7507		wr32(E1000_WUC, 0);
7508		wr32(E1000_WUFC, 0);
7509	}
7510
7511	*enable_wake = wufc || adapter->en_mng_pt;
7512	if (!*enable_wake)
7513		igb_power_down_link(adapter);
7514	else
7515		igb_power_up_link(adapter);
7516
7517	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
7518	 * would have already happened in close and is redundant.
7519	 */
7520	igb_release_hw_control(adapter);
7521
7522	pci_disable_device(pdev);
7523
7524	return 0;
7525}
7526
7527#ifdef CONFIG_PM
7528#ifdef CONFIG_PM_SLEEP
7529static int igb_suspend(struct device *dev)
7530{
7531	int retval;
7532	bool wake;
7533	struct pci_dev *pdev = to_pci_dev(dev);
7534
7535	retval = __igb_shutdown(pdev, &wake, 0);
7536	if (retval)
7537		return retval;
7538
7539	if (wake) {
7540		pci_prepare_to_sleep(pdev);
7541	} else {
7542		pci_wake_from_d3(pdev, false);
7543		pci_set_power_state(pdev, PCI_D3hot);
7544	}
7545
7546	return 0;
7547}
7548#endif /* CONFIG_PM_SLEEP */
7549
7550static int igb_resume(struct device *dev)
7551{
7552	struct pci_dev *pdev = to_pci_dev(dev);
7553	struct net_device *netdev = pci_get_drvdata(pdev);
7554	struct igb_adapter *adapter = netdev_priv(netdev);
7555	struct e1000_hw *hw = &adapter->hw;
7556	u32 err;
7557
7558	pci_set_power_state(pdev, PCI_D0);
7559	pci_restore_state(pdev);
7560	pci_save_state(pdev);
7561
7562	if (!pci_device_is_present(pdev))
7563		return -ENODEV;
7564	err = pci_enable_device_mem(pdev);
7565	if (err) {
7566		dev_err(&pdev->dev,
7567			"igb: Cannot enable PCI device from suspend\n");
7568		return err;
7569	}
7570	pci_set_master(pdev);
7571
7572	pci_enable_wake(pdev, PCI_D3hot, 0);
7573	pci_enable_wake(pdev, PCI_D3cold, 0);
7574
7575	if (igb_init_interrupt_scheme(adapter, true)) {
7576		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
7577		rtnl_unlock();
7578		return -ENOMEM;
7579	}
7580
7581	igb_reset(adapter);
7582
7583	/* let the f/w know that the h/w is now under the control of the
7584	 * driver.
7585	 */
7586	igb_get_hw_control(adapter);
7587
7588	wr32(E1000_WUS, ~0);
7589
7590	if (netdev->flags & IFF_UP) {
7591		rtnl_lock();
7592		err = __igb_open(netdev, true);
7593		rtnl_unlock();
7594		if (err)
7595			return err;
7596	}
7597
7598	netif_device_attach(netdev);
7599	return 0;
7600}
7601
7602static int igb_runtime_idle(struct device *dev)
7603{
7604	struct pci_dev *pdev = to_pci_dev(dev);
7605	struct net_device *netdev = pci_get_drvdata(pdev);
7606	struct igb_adapter *adapter = netdev_priv(netdev);
7607
7608	if (!igb_has_link(adapter))
7609		pm_schedule_suspend(dev, MSEC_PER_SEC * 5);
7610
7611	return -EBUSY;
7612}
7613
7614static int igb_runtime_suspend(struct device *dev)
7615{
7616	struct pci_dev *pdev = to_pci_dev(dev);
7617	int retval;
7618	bool wake;
7619
7620	retval = __igb_shutdown(pdev, &wake, 1);
7621	if (retval)
7622		return retval;
7623
7624	if (wake) {
7625		pci_prepare_to_sleep(pdev);
7626	} else {
7627		pci_wake_from_d3(pdev, false);
7628		pci_set_power_state(pdev, PCI_D3hot);
7629	}
7630
7631	return 0;
7632}
7633
7634static int igb_runtime_resume(struct device *dev)
7635{
7636	return igb_resume(dev);
7637}
7638#endif /* CONFIG_PM */
7639
7640static void igb_shutdown(struct pci_dev *pdev)
7641{
7642	bool wake;
7643
7644	__igb_shutdown(pdev, &wake, 0);
7645
7646	if (system_state == SYSTEM_POWER_OFF) {
7647		pci_wake_from_d3(pdev, wake);
7648		pci_set_power_state(pdev, PCI_D3hot);
7649	}
7650}
7651
7652#ifdef CONFIG_PCI_IOV
7653static int igb_sriov_reinit(struct pci_dev *dev)
7654{
7655	struct net_device *netdev = pci_get_drvdata(dev);
7656	struct igb_adapter *adapter = netdev_priv(netdev);
7657	struct pci_dev *pdev = adapter->pdev;
7658
7659	rtnl_lock();
7660
7661	if (netif_running(netdev))
7662		igb_close(netdev);
7663	else
7664		igb_reset(adapter);
7665
7666	igb_clear_interrupt_scheme(adapter);
7667
7668	igb_init_queue_configuration(adapter);
7669
7670	if (igb_init_interrupt_scheme(adapter, true)) {
7671		rtnl_unlock();
7672		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
7673		return -ENOMEM;
7674	}
7675
7676	if (netif_running(netdev))
7677		igb_open(netdev);
7678
7679	rtnl_unlock();
7680
7681	return 0;
7682}
7683
7684static int igb_pci_disable_sriov(struct pci_dev *dev)
7685{
7686	int err = igb_disable_sriov(dev);
7687
7688	if (!err)
7689		err = igb_sriov_reinit(dev);
7690
7691	return err;
7692}
7693
7694static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs)
7695{
7696	int err = igb_enable_sriov(dev, num_vfs);
7697
7698	if (err)
7699		goto out;
7700
7701	err = igb_sriov_reinit(dev);
7702	if (!err)
7703		return num_vfs;
7704
7705out:
7706	return err;
7707}
7708
7709#endif
7710static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
7711{
7712#ifdef CONFIG_PCI_IOV
7713	if (num_vfs == 0)
7714		return igb_pci_disable_sriov(dev);
7715	else
7716		return igb_pci_enable_sriov(dev, num_vfs);
7717#endif
7718	return 0;
7719}
7720
7721#ifdef CONFIG_NET_POLL_CONTROLLER
7722/* Polling 'interrupt' - used by things like netconsole to send skbs
7723 * without having to re-enable interrupts. It's not called while
7724 * the interrupt routine is executing.
7725 */
7726static void igb_netpoll(struct net_device *netdev)
7727{
7728	struct igb_adapter *adapter = netdev_priv(netdev);
7729	struct e1000_hw *hw = &adapter->hw;
7730	struct igb_q_vector *q_vector;
7731	int i;
7732
7733	for (i = 0; i < adapter->num_q_vectors; i++) {
7734		q_vector = adapter->q_vector[i];
7735		if (adapter->flags & IGB_FLAG_HAS_MSIX)
7736			wr32(E1000_EIMC, q_vector->eims_value);
7737		else
7738			igb_irq_disable(adapter);
7739		napi_schedule(&q_vector->napi);
7740	}
7741}
7742#endif /* CONFIG_NET_POLL_CONTROLLER */
7743
7744/**
7745 *  igb_io_error_detected - called when PCI error is detected
7746 *  @pdev: Pointer to PCI device
7747 *  @state: The current pci connection state
7748 *
7749 *  This function is called after a PCI bus error affecting
7750 *  this device has been detected.
7751 **/
7752static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
7753					      pci_channel_state_t state)
7754{
7755	struct net_device *netdev = pci_get_drvdata(pdev);
7756	struct igb_adapter *adapter = netdev_priv(netdev);
7757
7758	netif_device_detach(netdev);
7759
7760	if (state == pci_channel_io_perm_failure)
7761		return PCI_ERS_RESULT_DISCONNECT;
7762
7763	if (netif_running(netdev))
7764		igb_down(adapter);
7765	pci_disable_device(pdev);
7766
7767	/* Request a slot slot reset. */
7768	return PCI_ERS_RESULT_NEED_RESET;
7769}
7770
7771/**
7772 *  igb_io_slot_reset - called after the pci bus has been reset.
7773 *  @pdev: Pointer to PCI device
7774 *
7775 *  Restart the card from scratch, as if from a cold-boot. Implementation
7776 *  resembles the first-half of the igb_resume routine.
7777 **/
7778static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
7779{
7780	struct net_device *netdev = pci_get_drvdata(pdev);
7781	struct igb_adapter *adapter = netdev_priv(netdev);
7782	struct e1000_hw *hw = &adapter->hw;
7783	pci_ers_result_t result;
7784	int err;
7785
7786	if (pci_enable_device_mem(pdev)) {
7787		dev_err(&pdev->dev,
7788			"Cannot re-enable PCI device after reset.\n");
7789		result = PCI_ERS_RESULT_DISCONNECT;
7790	} else {
7791		pci_set_master(pdev);
7792		pci_restore_state(pdev);
7793		pci_save_state(pdev);
7794
7795		pci_enable_wake(pdev, PCI_D3hot, 0);
7796		pci_enable_wake(pdev, PCI_D3cold, 0);
7797
7798		igb_reset(adapter);
7799		wr32(E1000_WUS, ~0);
7800		result = PCI_ERS_RESULT_RECOVERED;
7801	}
7802
7803	err = pci_cleanup_aer_uncorrect_error_status(pdev);
7804	if (err) {
7805		dev_err(&pdev->dev,
7806			"pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
7807			err);
7808		/* non-fatal, continue */
7809	}
7810
7811	return result;
7812}
7813
7814/**
7815 *  igb_io_resume - called when traffic can start flowing again.
7816 *  @pdev: Pointer to PCI device
7817 *
7818 *  This callback is called when the error recovery driver tells us that
7819 *  its OK to resume normal operation. Implementation resembles the
7820 *  second-half of the igb_resume routine.
7821 */
7822static void igb_io_resume(struct pci_dev *pdev)
7823{
7824	struct net_device *netdev = pci_get_drvdata(pdev);
7825	struct igb_adapter *adapter = netdev_priv(netdev);
7826
7827	if (netif_running(netdev)) {
7828		if (igb_up(adapter)) {
7829			dev_err(&pdev->dev, "igb_up failed after reset\n");
7830			return;
7831		}
7832	}
7833
7834	netif_device_attach(netdev);
7835
7836	/* let the f/w know that the h/w is now under the control of the
7837	 * driver.
7838	 */
7839	igb_get_hw_control(adapter);
7840}
7841
7842static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
7843			     u8 qsel)
7844{
7845	struct e1000_hw *hw = &adapter->hw;
7846	u32 rar_low, rar_high;
7847
7848	/* HW expects these in little endian so we reverse the byte order
7849	 * from network order (big endian) to CPU endian
7850	 */
7851	rar_low = le32_to_cpup((__be32 *)(addr));
7852	rar_high = le16_to_cpup((__be16 *)(addr + 4));
7853
7854	/* Indicate to hardware the Address is Valid. */
7855	rar_high |= E1000_RAH_AV;
7856
7857	if (hw->mac.type == e1000_82575)
7858		rar_high |= E1000_RAH_POOL_1 * qsel;
7859	else
7860		rar_high |= E1000_RAH_POOL_1 << qsel;
7861
7862	wr32(E1000_RAL(index), rar_low);
7863	wrfl();
7864	wr32(E1000_RAH(index), rar_high);
7865	wrfl();
7866}
7867
7868static int igb_set_vf_mac(struct igb_adapter *adapter,
7869			  int vf, unsigned char *mac_addr)
7870{
7871	struct e1000_hw *hw = &adapter->hw;
7872	/* VF MAC addresses start at end of receive addresses and moves
7873	 * towards the first, as a result a collision should not be possible
7874	 */
7875	int rar_entry = hw->mac.rar_entry_count - (vf + 1);
7876
7877	memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
7878
7879	igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
7880
7881	return 0;
7882}
7883
7884static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
7885{
7886	struct igb_adapter *adapter = netdev_priv(netdev);
7887	if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
7888		return -EINVAL;
7889	adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
7890	dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
7891	dev_info(&adapter->pdev->dev,
7892		 "Reload the VF driver to make this change effective.");
7893	if (test_bit(__IGB_DOWN, &adapter->state)) {
7894		dev_warn(&adapter->pdev->dev,
7895			 "The VF MAC address has been set, but the PF device is not up.\n");
7896		dev_warn(&adapter->pdev->dev,
7897			 "Bring the PF device up before attempting to use the VF device.\n");
7898	}
7899	return igb_set_vf_mac(adapter, vf, mac);
7900}
7901
7902static int igb_link_mbps(int internal_link_speed)
7903{
7904	switch (internal_link_speed) {
7905	case SPEED_100:
7906		return 100;
7907	case SPEED_1000:
7908		return 1000;
7909	default:
7910		return 0;
7911	}
7912}
7913
7914static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
7915				  int link_speed)
7916{
7917	int rf_dec, rf_int;
7918	u32 bcnrc_val;
7919
7920	if (tx_rate != 0) {
7921		/* Calculate the rate factor values to set */
7922		rf_int = link_speed / tx_rate;
7923		rf_dec = (link_speed - (rf_int * tx_rate));
7924		rf_dec = (rf_dec * (1 << E1000_RTTBCNRC_RF_INT_SHIFT)) /
7925			 tx_rate;
7926
7927		bcnrc_val = E1000_RTTBCNRC_RS_ENA;
7928		bcnrc_val |= ((rf_int << E1000_RTTBCNRC_RF_INT_SHIFT) &
7929			      E1000_RTTBCNRC_RF_INT_MASK);
7930		bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
7931	} else {
7932		bcnrc_val = 0;
7933	}
7934
7935	wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */
7936	/* Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
7937	 * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported.
7938	 */
7939	wr32(E1000_RTTBCNRM, 0x14);
7940	wr32(E1000_RTTBCNRC, bcnrc_val);
7941}
7942
7943static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
7944{
7945	int actual_link_speed, i;
7946	bool reset_rate = false;
7947
7948	/* VF TX rate limit was not set or not supported */
7949	if ((adapter->vf_rate_link_speed == 0) ||
7950	    (adapter->hw.mac.type != e1000_82576))
7951		return;
7952
7953	actual_link_speed = igb_link_mbps(adapter->link_speed);
7954	if (actual_link_speed != adapter->vf_rate_link_speed) {
7955		reset_rate = true;
7956		adapter->vf_rate_link_speed = 0;
7957		dev_info(&adapter->pdev->dev,
7958			 "Link speed has been changed. VF Transmit rate is disabled\n");
7959	}
7960
7961	for (i = 0; i < adapter->vfs_allocated_count; i++) {
7962		if (reset_rate)
7963			adapter->vf_data[i].tx_rate = 0;
7964
7965		igb_set_vf_rate_limit(&adapter->hw, i,
7966				      adapter->vf_data[i].tx_rate,
7967				      actual_link_speed);
7968	}
7969}
7970
7971static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf,
7972			     int min_tx_rate, int max_tx_rate)
7973{
7974	struct igb_adapter *adapter = netdev_priv(netdev);
7975	struct e1000_hw *hw = &adapter->hw;
7976	int actual_link_speed;
7977
7978	if (hw->mac.type != e1000_82576)
7979		return -EOPNOTSUPP;
7980
7981	if (min_tx_rate)
7982		return -EINVAL;
7983
7984	actual_link_speed = igb_link_mbps(adapter->link_speed);
7985	if ((vf >= adapter->vfs_allocated_count) ||
7986	    (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
7987	    (max_tx_rate < 0) ||
7988	    (max_tx_rate > actual_link_speed))
7989		return -EINVAL;
7990
7991	adapter->vf_rate_link_speed = actual_link_speed;
7992	adapter->vf_data[vf].tx_rate = (u16)max_tx_rate;
7993	igb_set_vf_rate_limit(hw, vf, max_tx_rate, actual_link_speed);
7994
7995	return 0;
7996}
7997
7998static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf,
7999				   bool setting)
8000{
8001	struct igb_adapter *adapter = netdev_priv(netdev);
8002	struct e1000_hw *hw = &adapter->hw;
8003	u32 reg_val, reg_offset;
8004
8005	if (!adapter->vfs_allocated_count)
8006		return -EOPNOTSUPP;
8007
8008	if (vf >= adapter->vfs_allocated_count)
8009		return -EINVAL;
8010
8011	reg_offset = (hw->mac.type == e1000_82576) ? E1000_DTXSWC : E1000_TXSWC;
8012	reg_val = rd32(reg_offset);
8013	if (setting)
8014		reg_val |= ((1 << vf) |
8015			    (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT)));
8016	else
8017		reg_val &= ~((1 << vf) |
8018			     (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT)));
8019	wr32(reg_offset, reg_val);
8020
8021	adapter->vf_data[vf].spoofchk_enabled = setting;
8022	return 0;
8023}
8024
8025static int igb_ndo_get_vf_config(struct net_device *netdev,
8026				 int vf, struct ifla_vf_info *ivi)
8027{
8028	struct igb_adapter *adapter = netdev_priv(netdev);
8029	if (vf >= adapter->vfs_allocated_count)
8030		return -EINVAL;
8031	ivi->vf = vf;
8032	memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
8033	ivi->max_tx_rate = adapter->vf_data[vf].tx_rate;
8034	ivi->min_tx_rate = 0;
8035	ivi->vlan = adapter->vf_data[vf].pf_vlan;
8036	ivi->qos = adapter->vf_data[vf].pf_qos;
8037	ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled;
8038	return 0;
8039}
8040
8041static void igb_vmm_control(struct igb_adapter *adapter)
8042{
8043	struct e1000_hw *hw = &adapter->hw;
8044	u32 reg;
8045
8046	switch (hw->mac.type) {
8047	case e1000_82575:
8048	case e1000_i210:
8049	case e1000_i211:
8050	case e1000_i354:
8051	default:
8052		/* replication is not supported for 82575 */
8053		return;
8054	case e1000_82576:
8055		/* notify HW that the MAC is adding vlan tags */
8056		reg = rd32(E1000_DTXCTL);
8057		reg |= E1000_DTXCTL_VLAN_ADDED;
8058		wr32(E1000_DTXCTL, reg);
8059		/* Fall through */
8060	case e1000_82580:
8061		/* enable replication vlan tag stripping */
8062		reg = rd32(E1000_RPLOLR);
8063		reg |= E1000_RPLOLR_STRVLAN;
8064		wr32(E1000_RPLOLR, reg);
8065		/* Fall through */
8066	case e1000_i350:
8067		/* none of the above registers are supported by i350 */
8068		break;
8069	}
8070
8071	if (adapter->vfs_allocated_count) {
8072		igb_vmdq_set_loopback_pf(hw, true);
8073		igb_vmdq_set_replication_pf(hw, true);
8074		igb_vmdq_set_anti_spoofing_pf(hw, true,
8075					      adapter->vfs_allocated_count);
8076	} else {
8077		igb_vmdq_set_loopback_pf(hw, false);
8078		igb_vmdq_set_replication_pf(hw, false);
8079	}
8080}
8081
8082static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
8083{
8084	struct e1000_hw *hw = &adapter->hw;
8085	u32 dmac_thr;
8086	u16 hwm;
8087
8088	if (hw->mac.type > e1000_82580) {
8089		if (adapter->flags & IGB_FLAG_DMAC) {
8090			u32 reg;
8091
8092			/* force threshold to 0. */
8093			wr32(E1000_DMCTXTH, 0);
8094
8095			/* DMA Coalescing high water mark needs to be greater
8096			 * than the Rx threshold. Set hwm to PBA - max frame
8097			 * size in 16B units, capping it at PBA - 6KB.
8098			 */
8099			hwm = 64 * (pba - 6);
8100			reg = rd32(E1000_FCRTC);
8101			reg &= ~E1000_FCRTC_RTH_COAL_MASK;
8102			reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT)
8103				& E1000_FCRTC_RTH_COAL_MASK);
8104			wr32(E1000_FCRTC, reg);
8105
8106			/* Set the DMA Coalescing Rx threshold to PBA - 2 * max
8107			 * frame size, capping it at PBA - 10KB.
8108			 */
8109			dmac_thr = pba - 10;
8110			reg = rd32(E1000_DMACR);
8111			reg &= ~E1000_DMACR_DMACTHR_MASK;
8112			reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT)
8113				& E1000_DMACR_DMACTHR_MASK);
8114
8115			/* transition to L0x or L1 if available..*/
8116			reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
8117
8118			/* watchdog timer= +-1000 usec in 32usec intervals */
8119			reg |= (1000 >> 5);
8120
8121			/* Disable BMC-to-OS Watchdog Enable */
8122			if (hw->mac.type != e1000_i354)
8123				reg &= ~E1000_DMACR_DC_BMC2OSW_EN;
8124
8125			wr32(E1000_DMACR, reg);
8126
8127			/* no lower threshold to disable
8128			 * coalescing(smart fifb)-UTRESH=0
8129			 */
8130			wr32(E1000_DMCRTRH, 0);
8131
8132			reg = (IGB_DMCTLX_DCFLUSH_DIS | 0x4);
8133
8134			wr32(E1000_DMCTLX, reg);
8135
8136			/* free space in tx packet buffer to wake from
8137			 * DMA coal
8138			 */
8139			wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE -
8140			     (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6);
8141
8142			/* make low power state decision controlled
8143			 * by DMA coal
8144			 */
8145			reg = rd32(E1000_PCIEMISC);
8146			reg &= ~E1000_PCIEMISC_LX_DECISION;
8147			wr32(E1000_PCIEMISC, reg);
8148		} /* endif adapter->dmac is not disabled */
8149	} else if (hw->mac.type == e1000_82580) {
8150		u32 reg = rd32(E1000_PCIEMISC);
8151
8152		wr32(E1000_PCIEMISC, reg & ~E1000_PCIEMISC_LX_DECISION);
8153		wr32(E1000_DMACR, 0);
8154	}
8155}
8156
8157/**
8158 *  igb_read_i2c_byte - Reads 8 bit word over I2C
8159 *  @hw: pointer to hardware structure
8160 *  @byte_offset: byte offset to read
8161 *  @dev_addr: device address
8162 *  @data: value read
8163 *
8164 *  Performs byte read operation over I2C interface at
8165 *  a specified device address.
8166 **/
8167s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
8168		      u8 dev_addr, u8 *data)
8169{
8170	struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
8171	struct i2c_client *this_client = adapter->i2c_client;
8172	s32 status;
8173	u16 swfw_mask = 0;
8174
8175	if (!this_client)
8176		return E1000_ERR_I2C;
8177
8178	swfw_mask = E1000_SWFW_PHY0_SM;
8179
8180	if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
8181		return E1000_ERR_SWFW_SYNC;
8182
8183	status = i2c_smbus_read_byte_data(this_client, byte_offset);
8184	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
8185
8186	if (status < 0)
8187		return E1000_ERR_I2C;
8188	else {
8189		*data = status;
8190		return 0;
8191	}
8192}
8193
8194/**
8195 *  igb_write_i2c_byte - Writes 8 bit word over I2C
8196 *  @hw: pointer to hardware structure
8197 *  @byte_offset: byte offset to write
8198 *  @dev_addr: device address
8199 *  @data: value to write
8200 *
8201 *  Performs byte write operation over I2C interface at
8202 *  a specified device address.
8203 **/
8204s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
8205		       u8 dev_addr, u8 data)
8206{
8207	struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
8208	struct i2c_client *this_client = adapter->i2c_client;
8209	s32 status;
8210	u16 swfw_mask = E1000_SWFW_PHY0_SM;
8211
8212	if (!this_client)
8213		return E1000_ERR_I2C;
8214
8215	if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
8216		return E1000_ERR_SWFW_SYNC;
8217	status = i2c_smbus_write_byte_data(this_client, byte_offset, data);
8218	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
8219
8220	if (status)
8221		return E1000_ERR_I2C;
8222	else
8223		return 0;
8224
8225}
8226
8227int igb_reinit_queues(struct igb_adapter *adapter)
8228{
8229	struct net_device *netdev = adapter->netdev;
8230	struct pci_dev *pdev = adapter->pdev;
8231	int err = 0;
8232
8233	if (netif_running(netdev))
8234		igb_close(netdev);
8235
8236	igb_reset_interrupt_capability(adapter);
8237
8238	if (igb_init_interrupt_scheme(adapter, true)) {
8239		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
8240		return -ENOMEM;
8241	}
8242
8243	if (netif_running(netdev))
8244		err = igb_open(netdev);
8245
8246	return err;
8247}
8248/* igb_main.c */