Loading...
1/*
2 * linux/drivers/mmc/core/mmc_ops.h
3 *
4 * Copyright 2006-2007 Pierre Ossman
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
10 */
11
12#include <linux/slab.h>
13#include <linux/export.h>
14#include <linux/types.h>
15#include <linux/scatterlist.h>
16
17#include <linux/mmc/host.h>
18#include <linux/mmc/card.h>
19#include <linux/mmc/mmc.h>
20
21#include "core.h"
22#include "host.h"
23#include "mmc_ops.h"
24
25#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
26
27static const u8 tuning_blk_pattern_4bit[] = {
28 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
29 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
30 0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
31 0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
32 0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
33 0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
34 0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
35 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
36};
37
38static const u8 tuning_blk_pattern_8bit[] = {
39 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
40 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
41 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
42 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
43 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
44 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
45 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
46 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
47 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
48 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
49 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
50 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
51 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
52 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
53 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
54 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
55};
56
57static inline int __mmc_send_status(struct mmc_card *card, u32 *status,
58 bool ignore_crc)
59{
60 int err;
61 struct mmc_command cmd = {0};
62
63 BUG_ON(!card);
64 BUG_ON(!card->host);
65
66 cmd.opcode = MMC_SEND_STATUS;
67 if (!mmc_host_is_spi(card->host))
68 cmd.arg = card->rca << 16;
69 cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
70 if (ignore_crc)
71 cmd.flags &= ~MMC_RSP_CRC;
72
73 err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
74 if (err)
75 return err;
76
77 /* NOTE: callers are required to understand the difference
78 * between "native" and SPI format status words!
79 */
80 if (status)
81 *status = cmd.resp[0];
82
83 return 0;
84}
85
86int mmc_send_status(struct mmc_card *card, u32 *status)
87{
88 return __mmc_send_status(card, status, false);
89}
90
91static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
92{
93 struct mmc_command cmd = {0};
94
95 BUG_ON(!host);
96
97 cmd.opcode = MMC_SELECT_CARD;
98
99 if (card) {
100 cmd.arg = card->rca << 16;
101 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
102 } else {
103 cmd.arg = 0;
104 cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
105 }
106
107 return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
108}
109
110int mmc_select_card(struct mmc_card *card)
111{
112 BUG_ON(!card);
113
114 return _mmc_select_card(card->host, card);
115}
116
117int mmc_deselect_cards(struct mmc_host *host)
118{
119 return _mmc_select_card(host, NULL);
120}
121
122/*
123 * Write the value specified in the device tree or board code into the optional
124 * 16 bit Driver Stage Register. This can be used to tune raise/fall times and
125 * drive strength of the DAT and CMD outputs. The actual meaning of a given
126 * value is hardware dependant.
127 * The presence of the DSR register can be determined from the CSD register,
128 * bit 76.
129 */
130int mmc_set_dsr(struct mmc_host *host)
131{
132 struct mmc_command cmd = {0};
133
134 cmd.opcode = MMC_SET_DSR;
135
136 cmd.arg = (host->dsr << 16) | 0xffff;
137 cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
138
139 return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
140}
141
142int mmc_go_idle(struct mmc_host *host)
143{
144 int err;
145 struct mmc_command cmd = {0};
146
147 /*
148 * Non-SPI hosts need to prevent chipselect going active during
149 * GO_IDLE; that would put chips into SPI mode. Remind them of
150 * that in case of hardware that won't pull up DAT3/nCS otherwise.
151 *
152 * SPI hosts ignore ios.chip_select; it's managed according to
153 * rules that must accommodate non-MMC slaves which this layer
154 * won't even know about.
155 */
156 if (!mmc_host_is_spi(host)) {
157 mmc_set_chip_select(host, MMC_CS_HIGH);
158 mmc_delay(1);
159 }
160
161 cmd.opcode = MMC_GO_IDLE_STATE;
162 cmd.arg = 0;
163 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
164
165 err = mmc_wait_for_cmd(host, &cmd, 0);
166
167 mmc_delay(1);
168
169 if (!mmc_host_is_spi(host)) {
170 mmc_set_chip_select(host, MMC_CS_DONTCARE);
171 mmc_delay(1);
172 }
173
174 host->use_spi_crc = 0;
175
176 return err;
177}
178
179int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
180{
181 struct mmc_command cmd = {0};
182 int i, err = 0;
183
184 BUG_ON(!host);
185
186 cmd.opcode = MMC_SEND_OP_COND;
187 cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
188 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
189
190 for (i = 100; i; i--) {
191 err = mmc_wait_for_cmd(host, &cmd, 0);
192 if (err)
193 break;
194
195 /* if we're just probing, do a single pass */
196 if (ocr == 0)
197 break;
198
199 /* otherwise wait until reset completes */
200 if (mmc_host_is_spi(host)) {
201 if (!(cmd.resp[0] & R1_SPI_IDLE))
202 break;
203 } else {
204 if (cmd.resp[0] & MMC_CARD_BUSY)
205 break;
206 }
207
208 err = -ETIMEDOUT;
209
210 mmc_delay(10);
211 }
212
213 if (rocr && !mmc_host_is_spi(host))
214 *rocr = cmd.resp[0];
215
216 return err;
217}
218
219int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
220{
221 int err;
222 struct mmc_command cmd = {0};
223
224 BUG_ON(!host);
225 BUG_ON(!cid);
226
227 cmd.opcode = MMC_ALL_SEND_CID;
228 cmd.arg = 0;
229 cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
230
231 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
232 if (err)
233 return err;
234
235 memcpy(cid, cmd.resp, sizeof(u32) * 4);
236
237 return 0;
238}
239
240int mmc_set_relative_addr(struct mmc_card *card)
241{
242 struct mmc_command cmd = {0};
243
244 BUG_ON(!card);
245 BUG_ON(!card->host);
246
247 cmd.opcode = MMC_SET_RELATIVE_ADDR;
248 cmd.arg = card->rca << 16;
249 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
250
251 return mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
252}
253
254static int
255mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
256{
257 int err;
258 struct mmc_command cmd = {0};
259
260 BUG_ON(!host);
261 BUG_ON(!cxd);
262
263 cmd.opcode = opcode;
264 cmd.arg = arg;
265 cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
266
267 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
268 if (err)
269 return err;
270
271 memcpy(cxd, cmd.resp, sizeof(u32) * 4);
272
273 return 0;
274}
275
276/*
277 * NOTE: void *buf, caller for the buf is required to use DMA-capable
278 * buffer or on-stack buffer (with some overhead in callee).
279 */
280static int
281mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
282 u32 opcode, void *buf, unsigned len)
283{
284 struct mmc_request mrq = {NULL};
285 struct mmc_command cmd = {0};
286 struct mmc_data data = {0};
287 struct scatterlist sg;
288
289 mrq.cmd = &cmd;
290 mrq.data = &data;
291
292 cmd.opcode = opcode;
293 cmd.arg = 0;
294
295 /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we
296 * rely on callers to never use this with "native" calls for reading
297 * CSD or CID. Native versions of those commands use the R2 type,
298 * not R1 plus a data block.
299 */
300 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
301
302 data.blksz = len;
303 data.blocks = 1;
304 data.flags = MMC_DATA_READ;
305 data.sg = &sg;
306 data.sg_len = 1;
307
308 sg_init_one(&sg, buf, len);
309
310 if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
311 /*
312 * The spec states that CSR and CID accesses have a timeout
313 * of 64 clock cycles.
314 */
315 data.timeout_ns = 0;
316 data.timeout_clks = 64;
317 } else
318 mmc_set_data_timeout(&data, card);
319
320 mmc_wait_for_req(host, &mrq);
321
322 if (cmd.error)
323 return cmd.error;
324 if (data.error)
325 return data.error;
326
327 return 0;
328}
329
330int mmc_send_csd(struct mmc_card *card, u32 *csd)
331{
332 int ret, i;
333 u32 *csd_tmp;
334
335 if (!mmc_host_is_spi(card->host))
336 return mmc_send_cxd_native(card->host, card->rca << 16,
337 csd, MMC_SEND_CSD);
338
339 csd_tmp = kzalloc(16, GFP_KERNEL);
340 if (!csd_tmp)
341 return -ENOMEM;
342
343 ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd_tmp, 16);
344 if (ret)
345 goto err;
346
347 for (i = 0;i < 4;i++)
348 csd[i] = be32_to_cpu(csd_tmp[i]);
349
350err:
351 kfree(csd_tmp);
352 return ret;
353}
354
355int mmc_send_cid(struct mmc_host *host, u32 *cid)
356{
357 int ret, i;
358 u32 *cid_tmp;
359
360 if (!mmc_host_is_spi(host)) {
361 if (!host->card)
362 return -EINVAL;
363 return mmc_send_cxd_native(host, host->card->rca << 16,
364 cid, MMC_SEND_CID);
365 }
366
367 cid_tmp = kzalloc(16, GFP_KERNEL);
368 if (!cid_tmp)
369 return -ENOMEM;
370
371 ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid_tmp, 16);
372 if (ret)
373 goto err;
374
375 for (i = 0;i < 4;i++)
376 cid[i] = be32_to_cpu(cid_tmp[i]);
377
378err:
379 kfree(cid_tmp);
380 return ret;
381}
382
383int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
384{
385 int err;
386 u8 *ext_csd;
387
388 if (!card || !new_ext_csd)
389 return -EINVAL;
390
391 if (!mmc_can_ext_csd(card))
392 return -EOPNOTSUPP;
393
394 /*
395 * As the ext_csd is so large and mostly unused, we don't store the
396 * raw block in mmc_card.
397 */
398 ext_csd = kzalloc(512, GFP_KERNEL);
399 if (!ext_csd)
400 return -ENOMEM;
401
402 err = mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD, ext_csd,
403 512);
404 if (err)
405 kfree(ext_csd);
406 else
407 *new_ext_csd = ext_csd;
408
409 return err;
410}
411EXPORT_SYMBOL_GPL(mmc_get_ext_csd);
412
413int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
414{
415 struct mmc_command cmd = {0};
416 int err;
417
418 cmd.opcode = MMC_SPI_READ_OCR;
419 cmd.arg = highcap ? (1 << 30) : 0;
420 cmd.flags = MMC_RSP_SPI_R3;
421
422 err = mmc_wait_for_cmd(host, &cmd, 0);
423
424 *ocrp = cmd.resp[1];
425 return err;
426}
427
428int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
429{
430 struct mmc_command cmd = {0};
431 int err;
432
433 cmd.opcode = MMC_SPI_CRC_ON_OFF;
434 cmd.flags = MMC_RSP_SPI_R1;
435 cmd.arg = use_crc;
436
437 err = mmc_wait_for_cmd(host, &cmd, 0);
438 if (!err)
439 host->use_spi_crc = use_crc;
440 return err;
441}
442
443int mmc_switch_status_error(struct mmc_host *host, u32 status)
444{
445 if (mmc_host_is_spi(host)) {
446 if (status & R1_SPI_ILLEGAL_COMMAND)
447 return -EBADMSG;
448 } else {
449 if (status & 0xFDFFA000)
450 pr_warn("%s: unexpected status %#x after switch\n",
451 mmc_hostname(host), status);
452 if (status & R1_SWITCH_ERROR)
453 return -EBADMSG;
454 }
455 return 0;
456}
457
458/**
459 * __mmc_switch - modify EXT_CSD register
460 * @card: the MMC card associated with the data transfer
461 * @set: cmd set values
462 * @index: EXT_CSD register index
463 * @value: value to program into EXT_CSD register
464 * @timeout_ms: timeout (ms) for operation performed by register write,
465 * timeout of zero implies maximum possible timeout
466 * @use_busy_signal: use the busy signal as response type
467 * @send_status: send status cmd to poll for busy
468 * @ignore_crc: ignore CRC errors when sending status cmd to poll for busy
469 *
470 * Modifies the EXT_CSD register for selected card.
471 */
472int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
473 unsigned int timeout_ms, bool use_busy_signal, bool send_status,
474 bool ignore_crc)
475{
476 struct mmc_host *host = card->host;
477 int err;
478 struct mmc_command cmd = {0};
479 unsigned long timeout;
480 u32 status = 0;
481 bool use_r1b_resp = use_busy_signal;
482 bool expired = false;
483
484 mmc_retune_hold(host);
485
486 /*
487 * If the cmd timeout and the max_busy_timeout of the host are both
488 * specified, let's validate them. A failure means we need to prevent
489 * the host from doing hw busy detection, which is done by converting
490 * to a R1 response instead of a R1B.
491 */
492 if (timeout_ms && host->max_busy_timeout &&
493 (timeout_ms > host->max_busy_timeout))
494 use_r1b_resp = false;
495
496 cmd.opcode = MMC_SWITCH;
497 cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
498 (index << 16) |
499 (value << 8) |
500 set;
501 cmd.flags = MMC_CMD_AC;
502 if (use_r1b_resp) {
503 cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B;
504 /*
505 * A busy_timeout of zero means the host can decide to use
506 * whatever value it finds suitable.
507 */
508 cmd.busy_timeout = timeout_ms;
509 } else {
510 cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1;
511 }
512
513 if (index == EXT_CSD_SANITIZE_START)
514 cmd.sanitize_busy = true;
515
516 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
517 if (err)
518 goto out;
519
520 /* No need to check card status in case of unblocking command */
521 if (!use_busy_signal)
522 goto out;
523
524 /*
525 * CRC errors shall only be ignored in cases were CMD13 is used to poll
526 * to detect busy completion.
527 */
528 if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
529 ignore_crc = false;
530
531 /* We have an unspecified cmd timeout, use the fallback value. */
532 if (!timeout_ms)
533 timeout_ms = MMC_OPS_TIMEOUT_MS;
534
535 /* Must check status to be sure of no errors. */
536 timeout = jiffies + msecs_to_jiffies(timeout_ms);
537 do {
538 if (send_status) {
539 /*
540 * Due to the possibility of being preempted after
541 * sending the status command, check the expiration
542 * time first.
543 */
544 expired = time_after(jiffies, timeout);
545 err = __mmc_send_status(card, &status, ignore_crc);
546 if (err)
547 goto out;
548 }
549 if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
550 break;
551 if (mmc_host_is_spi(host))
552 break;
553
554 /*
555 * We are not allowed to issue a status command and the host
556 * does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only
557 * rely on waiting for the stated timeout to be sufficient.
558 */
559 if (!send_status) {
560 mmc_delay(timeout_ms);
561 goto out;
562 }
563
564 /* Timeout if the device never leaves the program state. */
565 if (expired && R1_CURRENT_STATE(status) == R1_STATE_PRG) {
566 pr_err("%s: Card stuck in programming state! %s\n",
567 mmc_hostname(host), __func__);
568 err = -ETIMEDOUT;
569 goto out;
570 }
571 } while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
572
573 err = mmc_switch_status_error(host, status);
574out:
575 mmc_retune_release(host);
576
577 return err;
578}
579
580int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
581 unsigned int timeout_ms)
582{
583 return __mmc_switch(card, set, index, value, timeout_ms, true, true,
584 false);
585}
586EXPORT_SYMBOL_GPL(mmc_switch);
587
588int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error)
589{
590 struct mmc_request mrq = {NULL};
591 struct mmc_command cmd = {0};
592 struct mmc_data data = {0};
593 struct scatterlist sg;
594 struct mmc_ios *ios = &host->ios;
595 const u8 *tuning_block_pattern;
596 int size, err = 0;
597 u8 *data_buf;
598
599 if (ios->bus_width == MMC_BUS_WIDTH_8) {
600 tuning_block_pattern = tuning_blk_pattern_8bit;
601 size = sizeof(tuning_blk_pattern_8bit);
602 } else if (ios->bus_width == MMC_BUS_WIDTH_4) {
603 tuning_block_pattern = tuning_blk_pattern_4bit;
604 size = sizeof(tuning_blk_pattern_4bit);
605 } else
606 return -EINVAL;
607
608 data_buf = kzalloc(size, GFP_KERNEL);
609 if (!data_buf)
610 return -ENOMEM;
611
612 mrq.cmd = &cmd;
613 mrq.data = &data;
614
615 cmd.opcode = opcode;
616 cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
617
618 data.blksz = size;
619 data.blocks = 1;
620 data.flags = MMC_DATA_READ;
621
622 /*
623 * According to the tuning specs, Tuning process
624 * is normally shorter 40 executions of CMD19,
625 * and timeout value should be shorter than 150 ms
626 */
627 data.timeout_ns = 150 * NSEC_PER_MSEC;
628
629 data.sg = &sg;
630 data.sg_len = 1;
631 sg_init_one(&sg, data_buf, size);
632
633 mmc_wait_for_req(host, &mrq);
634
635 if (cmd_error)
636 *cmd_error = cmd.error;
637
638 if (cmd.error) {
639 err = cmd.error;
640 goto out;
641 }
642
643 if (data.error) {
644 err = data.error;
645 goto out;
646 }
647
648 if (memcmp(data_buf, tuning_block_pattern, size))
649 err = -EIO;
650
651out:
652 kfree(data_buf);
653 return err;
654}
655EXPORT_SYMBOL_GPL(mmc_send_tuning);
656
657static int
658mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
659 u8 len)
660{
661 struct mmc_request mrq = {NULL};
662 struct mmc_command cmd = {0};
663 struct mmc_data data = {0};
664 struct scatterlist sg;
665 u8 *data_buf;
666 u8 *test_buf;
667 int i, err;
668 static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 };
669 static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 };
670
671 /* dma onto stack is unsafe/nonportable, but callers to this
672 * routine normally provide temporary on-stack buffers ...
673 */
674 data_buf = kmalloc(len, GFP_KERNEL);
675 if (!data_buf)
676 return -ENOMEM;
677
678 if (len == 8)
679 test_buf = testdata_8bit;
680 else if (len == 4)
681 test_buf = testdata_4bit;
682 else {
683 pr_err("%s: Invalid bus_width %d\n",
684 mmc_hostname(host), len);
685 kfree(data_buf);
686 return -EINVAL;
687 }
688
689 if (opcode == MMC_BUS_TEST_W)
690 memcpy(data_buf, test_buf, len);
691
692 mrq.cmd = &cmd;
693 mrq.data = &data;
694 cmd.opcode = opcode;
695 cmd.arg = 0;
696
697 /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we
698 * rely on callers to never use this with "native" calls for reading
699 * CSD or CID. Native versions of those commands use the R2 type,
700 * not R1 plus a data block.
701 */
702 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
703
704 data.blksz = len;
705 data.blocks = 1;
706 if (opcode == MMC_BUS_TEST_R)
707 data.flags = MMC_DATA_READ;
708 else
709 data.flags = MMC_DATA_WRITE;
710
711 data.sg = &sg;
712 data.sg_len = 1;
713 mmc_set_data_timeout(&data, card);
714 sg_init_one(&sg, data_buf, len);
715 mmc_wait_for_req(host, &mrq);
716 err = 0;
717 if (opcode == MMC_BUS_TEST_R) {
718 for (i = 0; i < len / 4; i++)
719 if ((test_buf[i] ^ data_buf[i]) != 0xff) {
720 err = -EIO;
721 break;
722 }
723 }
724 kfree(data_buf);
725
726 if (cmd.error)
727 return cmd.error;
728 if (data.error)
729 return data.error;
730
731 return err;
732}
733
734int mmc_bus_test(struct mmc_card *card, u8 bus_width)
735{
736 int width;
737
738 if (bus_width == MMC_BUS_WIDTH_8)
739 width = 8;
740 else if (bus_width == MMC_BUS_WIDTH_4)
741 width = 4;
742 else if (bus_width == MMC_BUS_WIDTH_1)
743 return 0; /* no need for test */
744 else
745 return -EINVAL;
746
747 /*
748 * Ignore errors from BUS_TEST_W. BUS_TEST_R will fail if there
749 * is a problem. This improves chances that the test will work.
750 */
751 mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width);
752 return mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width);
753}
754
755int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
756{
757 struct mmc_command cmd = {0};
758 unsigned int opcode;
759 int err;
760
761 if (!card->ext_csd.hpi) {
762 pr_warn("%s: Card didn't support HPI command\n",
763 mmc_hostname(card->host));
764 return -EINVAL;
765 }
766
767 opcode = card->ext_csd.hpi_cmd;
768 if (opcode == MMC_STOP_TRANSMISSION)
769 cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
770 else if (opcode == MMC_SEND_STATUS)
771 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
772
773 cmd.opcode = opcode;
774 cmd.arg = card->rca << 16 | 1;
775
776 err = mmc_wait_for_cmd(card->host, &cmd, 0);
777 if (err) {
778 pr_warn("%s: error %d interrupting operation. "
779 "HPI command response %#x\n", mmc_hostname(card->host),
780 err, cmd.resp[0]);
781 return err;
782 }
783 if (status)
784 *status = cmd.resp[0];
785
786 return 0;
787}
788
789int mmc_can_ext_csd(struct mmc_card *card)
790{
791 return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
792}
1/*
2 * linux/drivers/mmc/core/mmc_ops.h
3 *
4 * Copyright 2006-2007 Pierre Ossman
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
10 */
11
12#include <linux/slab.h>
13#include <linux/types.h>
14#include <linux/scatterlist.h>
15
16#include <linux/mmc/host.h>
17#include <linux/mmc/card.h>
18#include <linux/mmc/mmc.h>
19
20#include "core.h"
21#include "mmc_ops.h"
22
23static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
24{
25 int err;
26 struct mmc_command cmd = {0};
27
28 BUG_ON(!host);
29
30 cmd.opcode = MMC_SELECT_CARD;
31
32 if (card) {
33 cmd.arg = card->rca << 16;
34 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
35 } else {
36 cmd.arg = 0;
37 cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
38 }
39
40 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
41 if (err)
42 return err;
43
44 return 0;
45}
46
47int mmc_select_card(struct mmc_card *card)
48{
49 BUG_ON(!card);
50
51 return _mmc_select_card(card->host, card);
52}
53
54int mmc_deselect_cards(struct mmc_host *host)
55{
56 return _mmc_select_card(host, NULL);
57}
58
59int mmc_card_sleepawake(struct mmc_host *host, int sleep)
60{
61 struct mmc_command cmd = {0};
62 struct mmc_card *card = host->card;
63 int err;
64
65 if (sleep)
66 mmc_deselect_cards(host);
67
68 cmd.opcode = MMC_SLEEP_AWAKE;
69 cmd.arg = card->rca << 16;
70 if (sleep)
71 cmd.arg |= 1 << 15;
72
73 cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
74 err = mmc_wait_for_cmd(host, &cmd, 0);
75 if (err)
76 return err;
77
78 /*
79 * If the host does not wait while the card signals busy, then we will
80 * will have to wait the sleep/awake timeout. Note, we cannot use the
81 * SEND_STATUS command to poll the status because that command (and most
82 * others) is invalid while the card sleeps.
83 */
84 if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
85 mmc_delay(DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000));
86
87 if (!sleep)
88 err = mmc_select_card(card);
89
90 return err;
91}
92
93int mmc_go_idle(struct mmc_host *host)
94{
95 int err;
96 struct mmc_command cmd = {0};
97
98 /*
99 * Non-SPI hosts need to prevent chipselect going active during
100 * GO_IDLE; that would put chips into SPI mode. Remind them of
101 * that in case of hardware that won't pull up DAT3/nCS otherwise.
102 *
103 * SPI hosts ignore ios.chip_select; it's managed according to
104 * rules that must accommodate non-MMC slaves which this layer
105 * won't even know about.
106 */
107 if (!mmc_host_is_spi(host)) {
108 mmc_set_chip_select(host, MMC_CS_HIGH);
109 mmc_delay(1);
110 }
111
112 cmd.opcode = MMC_GO_IDLE_STATE;
113 cmd.arg = 0;
114 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
115
116 err = mmc_wait_for_cmd(host, &cmd, 0);
117
118 mmc_delay(1);
119
120 if (!mmc_host_is_spi(host)) {
121 mmc_set_chip_select(host, MMC_CS_DONTCARE);
122 mmc_delay(1);
123 }
124
125 host->use_spi_crc = 0;
126
127 return err;
128}
129
130int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
131{
132 struct mmc_command cmd = {0};
133 int i, err = 0;
134
135 BUG_ON(!host);
136
137 cmd.opcode = MMC_SEND_OP_COND;
138 cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
139 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
140
141 for (i = 100; i; i--) {
142 err = mmc_wait_for_cmd(host, &cmd, 0);
143 if (err)
144 break;
145
146 /* if we're just probing, do a single pass */
147 if (ocr == 0)
148 break;
149
150 /* otherwise wait until reset completes */
151 if (mmc_host_is_spi(host)) {
152 if (!(cmd.resp[0] & R1_SPI_IDLE))
153 break;
154 } else {
155 if (cmd.resp[0] & MMC_CARD_BUSY)
156 break;
157 }
158
159 err = -ETIMEDOUT;
160
161 mmc_delay(10);
162 }
163
164 if (rocr && !mmc_host_is_spi(host))
165 *rocr = cmd.resp[0];
166
167 return err;
168}
169
170int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
171{
172 int err;
173 struct mmc_command cmd = {0};
174
175 BUG_ON(!host);
176 BUG_ON(!cid);
177
178 cmd.opcode = MMC_ALL_SEND_CID;
179 cmd.arg = 0;
180 cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
181
182 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
183 if (err)
184 return err;
185
186 memcpy(cid, cmd.resp, sizeof(u32) * 4);
187
188 return 0;
189}
190
191int mmc_set_relative_addr(struct mmc_card *card)
192{
193 int err;
194 struct mmc_command cmd = {0};
195
196 BUG_ON(!card);
197 BUG_ON(!card->host);
198
199 cmd.opcode = MMC_SET_RELATIVE_ADDR;
200 cmd.arg = card->rca << 16;
201 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
202
203 err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
204 if (err)
205 return err;
206
207 return 0;
208}
209
210static int
211mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
212{
213 int err;
214 struct mmc_command cmd = {0};
215
216 BUG_ON(!host);
217 BUG_ON(!cxd);
218
219 cmd.opcode = opcode;
220 cmd.arg = arg;
221 cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
222
223 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
224 if (err)
225 return err;
226
227 memcpy(cxd, cmd.resp, sizeof(u32) * 4);
228
229 return 0;
230}
231
232static int
233mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
234 u32 opcode, void *buf, unsigned len)
235{
236 struct mmc_request mrq = {0};
237 struct mmc_command cmd = {0};
238 struct mmc_data data = {0};
239 struct scatterlist sg;
240 void *data_buf;
241
242 /* dma onto stack is unsafe/nonportable, but callers to this
243 * routine normally provide temporary on-stack buffers ...
244 */
245 data_buf = kmalloc(len, GFP_KERNEL);
246 if (data_buf == NULL)
247 return -ENOMEM;
248
249 mrq.cmd = &cmd;
250 mrq.data = &data;
251
252 cmd.opcode = opcode;
253 cmd.arg = 0;
254
255 /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we
256 * rely on callers to never use this with "native" calls for reading
257 * CSD or CID. Native versions of those commands use the R2 type,
258 * not R1 plus a data block.
259 */
260 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
261
262 data.blksz = len;
263 data.blocks = 1;
264 data.flags = MMC_DATA_READ;
265 data.sg = &sg;
266 data.sg_len = 1;
267
268 sg_init_one(&sg, data_buf, len);
269
270 if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
271 /*
272 * The spec states that CSR and CID accesses have a timeout
273 * of 64 clock cycles.
274 */
275 data.timeout_ns = 0;
276 data.timeout_clks = 64;
277 } else
278 mmc_set_data_timeout(&data, card);
279
280 mmc_wait_for_req(host, &mrq);
281
282 memcpy(buf, data_buf, len);
283 kfree(data_buf);
284
285 if (cmd.error)
286 return cmd.error;
287 if (data.error)
288 return data.error;
289
290 return 0;
291}
292
293int mmc_send_csd(struct mmc_card *card, u32 *csd)
294{
295 int ret, i;
296
297 if (!mmc_host_is_spi(card->host))
298 return mmc_send_cxd_native(card->host, card->rca << 16,
299 csd, MMC_SEND_CSD);
300
301 ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16);
302 if (ret)
303 return ret;
304
305 for (i = 0;i < 4;i++)
306 csd[i] = be32_to_cpu(csd[i]);
307
308 return 0;
309}
310
311int mmc_send_cid(struct mmc_host *host, u32 *cid)
312{
313 int ret, i;
314
315 if (!mmc_host_is_spi(host)) {
316 if (!host->card)
317 return -EINVAL;
318 return mmc_send_cxd_native(host, host->card->rca << 16,
319 cid, MMC_SEND_CID);
320 }
321
322 ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16);
323 if (ret)
324 return ret;
325
326 for (i = 0;i < 4;i++)
327 cid[i] = be32_to_cpu(cid[i]);
328
329 return 0;
330}
331
332int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
333{
334 return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
335 ext_csd, 512);
336}
337
338int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
339{
340 struct mmc_command cmd = {0};
341 int err;
342
343 cmd.opcode = MMC_SPI_READ_OCR;
344 cmd.arg = highcap ? (1 << 30) : 0;
345 cmd.flags = MMC_RSP_SPI_R3;
346
347 err = mmc_wait_for_cmd(host, &cmd, 0);
348
349 *ocrp = cmd.resp[1];
350 return err;
351}
352
353int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
354{
355 struct mmc_command cmd = {0};
356 int err;
357
358 cmd.opcode = MMC_SPI_CRC_ON_OFF;
359 cmd.flags = MMC_RSP_SPI_R1;
360 cmd.arg = use_crc;
361
362 err = mmc_wait_for_cmd(host, &cmd, 0);
363 if (!err)
364 host->use_spi_crc = use_crc;
365 return err;
366}
367
368/**
369 * mmc_switch - modify EXT_CSD register
370 * @card: the MMC card associated with the data transfer
371 * @set: cmd set values
372 * @index: EXT_CSD register index
373 * @value: value to program into EXT_CSD register
374 * @timeout_ms: timeout (ms) for operation performed by register write,
375 * timeout of zero implies maximum possible timeout
376 *
377 * Modifies the EXT_CSD register for selected card.
378 */
379int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
380 unsigned int timeout_ms)
381{
382 int err;
383 struct mmc_command cmd = {0};
384 u32 status;
385
386 BUG_ON(!card);
387 BUG_ON(!card->host);
388
389 cmd.opcode = MMC_SWITCH;
390 cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
391 (index << 16) |
392 (value << 8) |
393 set;
394 cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
395 cmd.cmd_timeout_ms = timeout_ms;
396
397 err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
398 if (err)
399 return err;
400
401 /* Must check status to be sure of no errors */
402 do {
403 err = mmc_send_status(card, &status);
404 if (err)
405 return err;
406 if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
407 break;
408 if (mmc_host_is_spi(card->host))
409 break;
410 } while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
411
412 if (mmc_host_is_spi(card->host)) {
413 if (status & R1_SPI_ILLEGAL_COMMAND)
414 return -EBADMSG;
415 } else {
416 if (status & 0xFDFFA000)
417 printk(KERN_WARNING "%s: unexpected status %#x after "
418 "switch", mmc_hostname(card->host), status);
419 if (status & R1_SWITCH_ERROR)
420 return -EBADMSG;
421 }
422
423 return 0;
424}
425EXPORT_SYMBOL_GPL(mmc_switch);
426
427int mmc_send_status(struct mmc_card *card, u32 *status)
428{
429 int err;
430 struct mmc_command cmd = {0};
431
432 BUG_ON(!card);
433 BUG_ON(!card->host);
434
435 cmd.opcode = MMC_SEND_STATUS;
436 if (!mmc_host_is_spi(card->host))
437 cmd.arg = card->rca << 16;
438 cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
439
440 err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
441 if (err)
442 return err;
443
444 /* NOTE: callers are required to understand the difference
445 * between "native" and SPI format status words!
446 */
447 if (status)
448 *status = cmd.resp[0];
449
450 return 0;
451}
452
453static int
454mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
455 u8 len)
456{
457 struct mmc_request mrq = {0};
458 struct mmc_command cmd = {0};
459 struct mmc_data data = {0};
460 struct scatterlist sg;
461 u8 *data_buf;
462 u8 *test_buf;
463 int i, err;
464 static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 };
465 static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 };
466
467 /* dma onto stack is unsafe/nonportable, but callers to this
468 * routine normally provide temporary on-stack buffers ...
469 */
470 data_buf = kmalloc(len, GFP_KERNEL);
471 if (!data_buf)
472 return -ENOMEM;
473
474 if (len == 8)
475 test_buf = testdata_8bit;
476 else if (len == 4)
477 test_buf = testdata_4bit;
478 else {
479 printk(KERN_ERR "%s: Invalid bus_width %d\n",
480 mmc_hostname(host), len);
481 kfree(data_buf);
482 return -EINVAL;
483 }
484
485 if (opcode == MMC_BUS_TEST_W)
486 memcpy(data_buf, test_buf, len);
487
488 mrq.cmd = &cmd;
489 mrq.data = &data;
490 cmd.opcode = opcode;
491 cmd.arg = 0;
492
493 /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we
494 * rely on callers to never use this with "native" calls for reading
495 * CSD or CID. Native versions of those commands use the R2 type,
496 * not R1 plus a data block.
497 */
498 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
499
500 data.blksz = len;
501 data.blocks = 1;
502 if (opcode == MMC_BUS_TEST_R)
503 data.flags = MMC_DATA_READ;
504 else
505 data.flags = MMC_DATA_WRITE;
506
507 data.sg = &sg;
508 data.sg_len = 1;
509 sg_init_one(&sg, data_buf, len);
510 mmc_wait_for_req(host, &mrq);
511 err = 0;
512 if (opcode == MMC_BUS_TEST_R) {
513 for (i = 0; i < len / 4; i++)
514 if ((test_buf[i] ^ data_buf[i]) != 0xff) {
515 err = -EIO;
516 break;
517 }
518 }
519 kfree(data_buf);
520
521 if (cmd.error)
522 return cmd.error;
523 if (data.error)
524 return data.error;
525
526 return err;
527}
528
529int mmc_bus_test(struct mmc_card *card, u8 bus_width)
530{
531 int err, width;
532
533 if (bus_width == MMC_BUS_WIDTH_8)
534 width = 8;
535 else if (bus_width == MMC_BUS_WIDTH_4)
536 width = 4;
537 else if (bus_width == MMC_BUS_WIDTH_1)
538 return 0; /* no need for test */
539 else
540 return -EINVAL;
541
542 /*
543 * Ignore errors from BUS_TEST_W. BUS_TEST_R will fail if there
544 * is a problem. This improves chances that the test will work.
545 */
546 mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width);
547 err = mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width);
548 return err;
549}