Loading...
1/*
2 * lm85.c - Part of lm_sensors, Linux kernel modules for hardware
3 * monitoring
4 * Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
5 * Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
6 * Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
7 * Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
8 * Copyright (C) 2007--2014 Jean Delvare <jdelvare@suse.de>
9 *
10 * Chip details at <http://www.national.com/ds/LM/LM85.pdf>
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 */
26
27#include <linux/module.h>
28#include <linux/init.h>
29#include <linux/slab.h>
30#include <linux/jiffies.h>
31#include <linux/i2c.h>
32#include <linux/hwmon.h>
33#include <linux/hwmon-vid.h>
34#include <linux/hwmon-sysfs.h>
35#include <linux/err.h>
36#include <linux/mutex.h>
37#include <linux/util_macros.h>
38
39/* Addresses to scan */
40static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
41
42enum chips {
43 lm85,
44 adm1027, adt7463, adt7468,
45 emc6d100, emc6d102, emc6d103, emc6d103s
46};
47
48/* The LM85 registers */
49
50#define LM85_REG_IN(nr) (0x20 + (nr))
51#define LM85_REG_IN_MIN(nr) (0x44 + (nr) * 2)
52#define LM85_REG_IN_MAX(nr) (0x45 + (nr) * 2)
53
54#define LM85_REG_TEMP(nr) (0x25 + (nr))
55#define LM85_REG_TEMP_MIN(nr) (0x4e + (nr) * 2)
56#define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2)
57
58/* Fan speeds are LSB, MSB (2 bytes) */
59#define LM85_REG_FAN(nr) (0x28 + (nr) * 2)
60#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) * 2)
61
62#define LM85_REG_PWM(nr) (0x30 + (nr))
63
64#define LM85_REG_COMPANY 0x3e
65#define LM85_REG_VERSTEP 0x3f
66
67#define ADT7468_REG_CFG5 0x7c
68#define ADT7468_OFF64 (1 << 0)
69#define ADT7468_HFPWM (1 << 1)
70#define IS_ADT7468_OFF64(data) \
71 ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64))
72#define IS_ADT7468_HFPWM(data) \
73 ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_HFPWM))
74
75/* These are the recognized values for the above regs */
76#define LM85_COMPANY_NATIONAL 0x01
77#define LM85_COMPANY_ANALOG_DEV 0x41
78#define LM85_COMPANY_SMSC 0x5c
79#define LM85_VERSTEP_LM85C 0x60
80#define LM85_VERSTEP_LM85B 0x62
81#define LM85_VERSTEP_LM96000_1 0x68
82#define LM85_VERSTEP_LM96000_2 0x69
83#define LM85_VERSTEP_ADM1027 0x60
84#define LM85_VERSTEP_ADT7463 0x62
85#define LM85_VERSTEP_ADT7463C 0x6A
86#define LM85_VERSTEP_ADT7468_1 0x71
87#define LM85_VERSTEP_ADT7468_2 0x72
88#define LM85_VERSTEP_EMC6D100_A0 0x60
89#define LM85_VERSTEP_EMC6D100_A1 0x61
90#define LM85_VERSTEP_EMC6D102 0x65
91#define LM85_VERSTEP_EMC6D103_A0 0x68
92#define LM85_VERSTEP_EMC6D103_A1 0x69
93#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */
94
95#define LM85_REG_CONFIG 0x40
96
97#define LM85_REG_ALARM1 0x41
98#define LM85_REG_ALARM2 0x42
99
100#define LM85_REG_VID 0x43
101
102/* Automated FAN control */
103#define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr))
104#define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr))
105#define LM85_REG_AFAN_SPIKE1 0x62
106#define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr))
107#define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr))
108#define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr))
109#define LM85_REG_AFAN_HYST1 0x6d
110#define LM85_REG_AFAN_HYST2 0x6e
111
112#define ADM1027_REG_EXTEND_ADC1 0x76
113#define ADM1027_REG_EXTEND_ADC2 0x77
114
115#define EMC6D100_REG_ALARM3 0x7d
116/* IN5, IN6 and IN7 */
117#define EMC6D100_REG_IN(nr) (0x70 + ((nr) - 5))
118#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr) - 5) * 2)
119#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr) - 5) * 2)
120#define EMC6D102_REG_EXTEND_ADC1 0x85
121#define EMC6D102_REG_EXTEND_ADC2 0x86
122#define EMC6D102_REG_EXTEND_ADC3 0x87
123#define EMC6D102_REG_EXTEND_ADC4 0x88
124
125/*
126 * Conversions. Rounding and limit checking is only done on the TO_REG
127 * variants. Note that you should be a bit careful with which arguments
128 * these macros are called: arguments may be evaluated more than once.
129 */
130
131/* IN are scaled according to built-in resistors */
132static const int lm85_scaling[] = { /* .001 Volts */
133 2500, 2250, 3300, 5000, 12000,
134 3300, 1500, 1800 /*EMC6D100*/
135};
136#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from))
137
138#define INS_TO_REG(n, val) \
139 clamp_val(SCALE(val, lm85_scaling[n], 192), 0, 255)
140
141#define INSEXT_FROM_REG(n, val, ext) \
142 SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n])
143
144#define INS_FROM_REG(n, val) SCALE((val), 192, lm85_scaling[n])
145
146/* FAN speed is measured using 90kHz clock */
147static inline u16 FAN_TO_REG(unsigned long val)
148{
149 if (!val)
150 return 0xffff;
151 return clamp_val(5400000 / val, 1, 0xfffe);
152}
153#define FAN_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
154 5400000 / (val))
155
156/* Temperature is reported in .001 degC increments */
157#define TEMP_TO_REG(val) \
158 DIV_ROUND_CLOSEST(clamp_val((val), -127000, 127000), 1000)
159#define TEMPEXT_FROM_REG(val, ext) \
160 SCALE(((val) << 4) + (ext), 16, 1000)
161#define TEMP_FROM_REG(val) ((val) * 1000)
162
163#define PWM_TO_REG(val) clamp_val(val, 0, 255)
164#define PWM_FROM_REG(val) (val)
165
166
167/*
168 * ZONEs have the following parameters:
169 * Limit (low) temp, 1. degC
170 * Hysteresis (below limit), 1. degC (0-15)
171 * Range of speed control, .1 degC (2-80)
172 * Critical (high) temp, 1. degC
173 *
174 * FAN PWMs have the following parameters:
175 * Reference Zone, 1, 2, 3, etc.
176 * Spinup time, .05 sec
177 * PWM value at limit/low temp, 1 count
178 * PWM Frequency, 1. Hz
179 * PWM is Min or OFF below limit, flag
180 * Invert PWM output, flag
181 *
182 * Some chips filter the temp, others the fan.
183 * Filter constant (or disabled) .1 seconds
184 */
185
186/* These are the zone temperature range encodings in .001 degree C */
187static const int lm85_range_map[] = {
188 2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000,
189 13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000
190};
191
192static int RANGE_TO_REG(long range)
193{
194 return find_closest(range, lm85_range_map, ARRAY_SIZE(lm85_range_map));
195}
196#define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f]
197
198/* These are the PWM frequency encodings */
199static const int lm85_freq_map[8] = { /* 1 Hz */
200 10, 15, 23, 30, 38, 47, 61, 94
201};
202static const int adm1027_freq_map[8] = { /* 1 Hz */
203 11, 15, 22, 29, 35, 44, 59, 88
204};
205#define FREQ_MAP_LEN 8
206
207static int FREQ_TO_REG(const int *map,
208 unsigned int map_size, unsigned long freq)
209{
210 return find_closest(freq, map, map_size);
211}
212
213static int FREQ_FROM_REG(const int *map, u8 reg)
214{
215 return map[reg & 0x07];
216}
217
218/*
219 * Since we can't use strings, I'm abusing these numbers
220 * to stand in for the following meanings:
221 * 1 -- PWM responds to Zone 1
222 * 2 -- PWM responds to Zone 2
223 * 3 -- PWM responds to Zone 3
224 * 23 -- PWM responds to the higher temp of Zone 2 or 3
225 * 123 -- PWM responds to highest of Zone 1, 2, or 3
226 * 0 -- PWM is always at 0% (ie, off)
227 * -1 -- PWM is always at 100%
228 * -2 -- PWM responds to manual control
229 */
230
231static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
232#define ZONE_FROM_REG(val) lm85_zone_map[(val) >> 5]
233
234static int ZONE_TO_REG(int zone)
235{
236 int i;
237
238 for (i = 0; i <= 7; ++i)
239 if (zone == lm85_zone_map[i])
240 break;
241 if (i > 7) /* Not found. */
242 i = 3; /* Always 100% */
243 return i << 5;
244}
245
246#define HYST_TO_REG(val) clamp_val(((val) + 500) / 1000, 0, 15)
247#define HYST_FROM_REG(val) ((val) * 1000)
248
249/*
250 * Chip sampling rates
251 *
252 * Some sensors are not updated more frequently than once per second
253 * so it doesn't make sense to read them more often than that.
254 * We cache the results and return the saved data if the driver
255 * is called again before a second has elapsed.
256 *
257 * Also, there is significant configuration data for this chip
258 * given the automatic PWM fan control that is possible. There
259 * are about 47 bytes of config data to only 22 bytes of actual
260 * readings. So, we keep the config data up to date in the cache
261 * when it is written and only sample it once every 1 *minute*
262 */
263#define LM85_DATA_INTERVAL (HZ + HZ / 2)
264#define LM85_CONFIG_INTERVAL (1 * 60 * HZ)
265
266/*
267 * LM85 can automatically adjust fan speeds based on temperature
268 * This structure encapsulates an entire Zone config. There are
269 * three zones (one for each temperature input) on the lm85
270 */
271struct lm85_zone {
272 s8 limit; /* Low temp limit */
273 u8 hyst; /* Low limit hysteresis. (0-15) */
274 u8 range; /* Temp range, encoded */
275 s8 critical; /* "All fans ON" temp limit */
276 u8 max_desired; /*
277 * Actual "max" temperature specified. Preserved
278 * to prevent "drift" as other autofan control
279 * values change.
280 */
281};
282
283struct lm85_autofan {
284 u8 config; /* Register value */
285 u8 min_pwm; /* Minimum PWM value, encoded */
286 u8 min_off; /* Min PWM or OFF below "limit", flag */
287};
288
289/*
290 * For each registered chip, we need to keep some data in memory.
291 * The structure is dynamically allocated.
292 */
293struct lm85_data {
294 struct i2c_client *client;
295 const struct attribute_group *groups[6];
296 const int *freq_map;
297 enum chips type;
298
299 bool has_vid5; /* true if VID5 is configured for ADT7463 or ADT7468 */
300
301 struct mutex update_lock;
302 int valid; /* !=0 if following fields are valid */
303 unsigned long last_reading; /* In jiffies */
304 unsigned long last_config; /* In jiffies */
305
306 u8 in[8]; /* Register value */
307 u8 in_max[8]; /* Register value */
308 u8 in_min[8]; /* Register value */
309 s8 temp[3]; /* Register value */
310 s8 temp_min[3]; /* Register value */
311 s8 temp_max[3]; /* Register value */
312 u16 fan[4]; /* Register value */
313 u16 fan_min[4]; /* Register value */
314 u8 pwm[3]; /* Register value */
315 u8 pwm_freq[3]; /* Register encoding */
316 u8 temp_ext[3]; /* Decoded values */
317 u8 in_ext[8]; /* Decoded values */
318 u8 vid; /* Register value */
319 u8 vrm; /* VRM version */
320 u32 alarms; /* Register encoding, combined */
321 u8 cfg5; /* Config Register 5 on ADT7468 */
322 struct lm85_autofan autofan[3];
323 struct lm85_zone zone[3];
324};
325
326static int lm85_read_value(struct i2c_client *client, u8 reg)
327{
328 int res;
329
330 /* What size location is it? */
331 switch (reg) {
332 case LM85_REG_FAN(0): /* Read WORD data */
333 case LM85_REG_FAN(1):
334 case LM85_REG_FAN(2):
335 case LM85_REG_FAN(3):
336 case LM85_REG_FAN_MIN(0):
337 case LM85_REG_FAN_MIN(1):
338 case LM85_REG_FAN_MIN(2):
339 case LM85_REG_FAN_MIN(3):
340 case LM85_REG_ALARM1: /* Read both bytes at once */
341 res = i2c_smbus_read_byte_data(client, reg) & 0xff;
342 res |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
343 break;
344 default: /* Read BYTE data */
345 res = i2c_smbus_read_byte_data(client, reg);
346 break;
347 }
348
349 return res;
350}
351
352static void lm85_write_value(struct i2c_client *client, u8 reg, int value)
353{
354 switch (reg) {
355 case LM85_REG_FAN(0): /* Write WORD data */
356 case LM85_REG_FAN(1):
357 case LM85_REG_FAN(2):
358 case LM85_REG_FAN(3):
359 case LM85_REG_FAN_MIN(0):
360 case LM85_REG_FAN_MIN(1):
361 case LM85_REG_FAN_MIN(2):
362 case LM85_REG_FAN_MIN(3):
363 /* NOTE: ALARM is read only, so not included here */
364 i2c_smbus_write_byte_data(client, reg, value & 0xff);
365 i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
366 break;
367 default: /* Write BYTE data */
368 i2c_smbus_write_byte_data(client, reg, value);
369 break;
370 }
371}
372
373static struct lm85_data *lm85_update_device(struct device *dev)
374{
375 struct lm85_data *data = dev_get_drvdata(dev);
376 struct i2c_client *client = data->client;
377 int i;
378
379 mutex_lock(&data->update_lock);
380
381 if (!data->valid ||
382 time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) {
383 /* Things that change quickly */
384 dev_dbg(&client->dev, "Reading sensor values\n");
385
386 /*
387 * Have to read extended bits first to "freeze" the
388 * more significant bits that are read later.
389 * There are 2 additional resolution bits per channel and we
390 * have room for 4, so we shift them to the left.
391 */
392 if (data->type == adm1027 || data->type == adt7463 ||
393 data->type == adt7468) {
394 int ext1 = lm85_read_value(client,
395 ADM1027_REG_EXTEND_ADC1);
396 int ext2 = lm85_read_value(client,
397 ADM1027_REG_EXTEND_ADC2);
398 int val = (ext1 << 8) + ext2;
399
400 for (i = 0; i <= 4; i++)
401 data->in_ext[i] =
402 ((val >> (i * 2)) & 0x03) << 2;
403
404 for (i = 0; i <= 2; i++)
405 data->temp_ext[i] =
406 (val >> ((i + 4) * 2)) & 0x0c;
407 }
408
409 data->vid = lm85_read_value(client, LM85_REG_VID);
410
411 for (i = 0; i <= 3; ++i) {
412 data->in[i] =
413 lm85_read_value(client, LM85_REG_IN(i));
414 data->fan[i] =
415 lm85_read_value(client, LM85_REG_FAN(i));
416 }
417
418 if (!data->has_vid5)
419 data->in[4] = lm85_read_value(client, LM85_REG_IN(4));
420
421 if (data->type == adt7468)
422 data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
423
424 for (i = 0; i <= 2; ++i) {
425 data->temp[i] =
426 lm85_read_value(client, LM85_REG_TEMP(i));
427 data->pwm[i] =
428 lm85_read_value(client, LM85_REG_PWM(i));
429
430 if (IS_ADT7468_OFF64(data))
431 data->temp[i] -= 64;
432 }
433
434 data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
435
436 if (data->type == emc6d100) {
437 /* Three more voltage sensors */
438 for (i = 5; i <= 7; ++i) {
439 data->in[i] = lm85_read_value(client,
440 EMC6D100_REG_IN(i));
441 }
442 /* More alarm bits */
443 data->alarms |= lm85_read_value(client,
444 EMC6D100_REG_ALARM3) << 16;
445 } else if (data->type == emc6d102 || data->type == emc6d103 ||
446 data->type == emc6d103s) {
447 /*
448 * Have to read LSB bits after the MSB ones because
449 * the reading of the MSB bits has frozen the
450 * LSBs (backward from the ADM1027).
451 */
452 int ext1 = lm85_read_value(client,
453 EMC6D102_REG_EXTEND_ADC1);
454 int ext2 = lm85_read_value(client,
455 EMC6D102_REG_EXTEND_ADC2);
456 int ext3 = lm85_read_value(client,
457 EMC6D102_REG_EXTEND_ADC3);
458 int ext4 = lm85_read_value(client,
459 EMC6D102_REG_EXTEND_ADC4);
460 data->in_ext[0] = ext3 & 0x0f;
461 data->in_ext[1] = ext4 & 0x0f;
462 data->in_ext[2] = ext4 >> 4;
463 data->in_ext[3] = ext3 >> 4;
464 data->in_ext[4] = ext2 >> 4;
465
466 data->temp_ext[0] = ext1 & 0x0f;
467 data->temp_ext[1] = ext2 & 0x0f;
468 data->temp_ext[2] = ext1 >> 4;
469 }
470
471 data->last_reading = jiffies;
472 } /* last_reading */
473
474 if (!data->valid ||
475 time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) {
476 /* Things that don't change often */
477 dev_dbg(&client->dev, "Reading config values\n");
478
479 for (i = 0; i <= 3; ++i) {
480 data->in_min[i] =
481 lm85_read_value(client, LM85_REG_IN_MIN(i));
482 data->in_max[i] =
483 lm85_read_value(client, LM85_REG_IN_MAX(i));
484 data->fan_min[i] =
485 lm85_read_value(client, LM85_REG_FAN_MIN(i));
486 }
487
488 if (!data->has_vid5) {
489 data->in_min[4] = lm85_read_value(client,
490 LM85_REG_IN_MIN(4));
491 data->in_max[4] = lm85_read_value(client,
492 LM85_REG_IN_MAX(4));
493 }
494
495 if (data->type == emc6d100) {
496 for (i = 5; i <= 7; ++i) {
497 data->in_min[i] = lm85_read_value(client,
498 EMC6D100_REG_IN_MIN(i));
499 data->in_max[i] = lm85_read_value(client,
500 EMC6D100_REG_IN_MAX(i));
501 }
502 }
503
504 for (i = 0; i <= 2; ++i) {
505 int val;
506
507 data->temp_min[i] =
508 lm85_read_value(client, LM85_REG_TEMP_MIN(i));
509 data->temp_max[i] =
510 lm85_read_value(client, LM85_REG_TEMP_MAX(i));
511
512 data->autofan[i].config =
513 lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
514 val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
515 data->pwm_freq[i] = val & 0x07;
516 data->zone[i].range = val >> 4;
517 data->autofan[i].min_pwm =
518 lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
519 data->zone[i].limit =
520 lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
521 data->zone[i].critical =
522 lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
523
524 if (IS_ADT7468_OFF64(data)) {
525 data->temp_min[i] -= 64;
526 data->temp_max[i] -= 64;
527 data->zone[i].limit -= 64;
528 data->zone[i].critical -= 64;
529 }
530 }
531
532 if (data->type != emc6d103s) {
533 i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
534 data->autofan[0].min_off = (i & 0x20) != 0;
535 data->autofan[1].min_off = (i & 0x40) != 0;
536 data->autofan[2].min_off = (i & 0x80) != 0;
537
538 i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
539 data->zone[0].hyst = i >> 4;
540 data->zone[1].hyst = i & 0x0f;
541
542 i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
543 data->zone[2].hyst = i >> 4;
544 }
545
546 data->last_config = jiffies;
547 } /* last_config */
548
549 data->valid = 1;
550
551 mutex_unlock(&data->update_lock);
552
553 return data;
554}
555
556/* 4 Fans */
557static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
558 char *buf)
559{
560 int nr = to_sensor_dev_attr(attr)->index;
561 struct lm85_data *data = lm85_update_device(dev);
562 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr]));
563}
564
565static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
566 char *buf)
567{
568 int nr = to_sensor_dev_attr(attr)->index;
569 struct lm85_data *data = lm85_update_device(dev);
570 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr]));
571}
572
573static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
574 const char *buf, size_t count)
575{
576 int nr = to_sensor_dev_attr(attr)->index;
577 struct lm85_data *data = dev_get_drvdata(dev);
578 struct i2c_client *client = data->client;
579 unsigned long val;
580 int err;
581
582 err = kstrtoul(buf, 10, &val);
583 if (err)
584 return err;
585
586 mutex_lock(&data->update_lock);
587 data->fan_min[nr] = FAN_TO_REG(val);
588 lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
589 mutex_unlock(&data->update_lock);
590 return count;
591}
592
593#define show_fan_offset(offset) \
594static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
595 show_fan, NULL, offset - 1); \
596static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
597 show_fan_min, set_fan_min, offset - 1)
598
599show_fan_offset(1);
600show_fan_offset(2);
601show_fan_offset(3);
602show_fan_offset(4);
603
604/* vid, vrm, alarms */
605
606static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
607 char *buf)
608{
609 struct lm85_data *data = lm85_update_device(dev);
610 int vid;
611
612 if (data->has_vid5) {
613 /* 6-pin VID (VRM 10) */
614 vid = vid_from_reg(data->vid & 0x3f, data->vrm);
615 } else {
616 /* 5-pin VID (VRM 9) */
617 vid = vid_from_reg(data->vid & 0x1f, data->vrm);
618 }
619
620 return sprintf(buf, "%d\n", vid);
621}
622
623static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
624
625static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
626 char *buf)
627{
628 struct lm85_data *data = dev_get_drvdata(dev);
629 return sprintf(buf, "%ld\n", (long) data->vrm);
630}
631
632static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
633 const char *buf, size_t count)
634{
635 struct lm85_data *data = dev_get_drvdata(dev);
636 unsigned long val;
637 int err;
638
639 err = kstrtoul(buf, 10, &val);
640 if (err)
641 return err;
642
643 if (val > 255)
644 return -EINVAL;
645
646 data->vrm = val;
647 return count;
648}
649
650static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
651
652static ssize_t show_alarms_reg(struct device *dev, struct device_attribute
653 *attr, char *buf)
654{
655 struct lm85_data *data = lm85_update_device(dev);
656 return sprintf(buf, "%u\n", data->alarms);
657}
658
659static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
660
661static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
662 char *buf)
663{
664 int nr = to_sensor_dev_attr(attr)->index;
665 struct lm85_data *data = lm85_update_device(dev);
666 return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
667}
668
669static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
670static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
671static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
672static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
673static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
674static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 18);
675static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 16);
676static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 17);
677static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
678static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14);
679static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
680static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 6);
681static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15);
682static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 10);
683static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 11);
684static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 12);
685static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 13);
686
687/* pwm */
688
689static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
690 char *buf)
691{
692 int nr = to_sensor_dev_attr(attr)->index;
693 struct lm85_data *data = lm85_update_device(dev);
694 return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
695}
696
697static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
698 const char *buf, size_t count)
699{
700 int nr = to_sensor_dev_attr(attr)->index;
701 struct lm85_data *data = dev_get_drvdata(dev);
702 struct i2c_client *client = data->client;
703 unsigned long val;
704 int err;
705
706 err = kstrtoul(buf, 10, &val);
707 if (err)
708 return err;
709
710 mutex_lock(&data->update_lock);
711 data->pwm[nr] = PWM_TO_REG(val);
712 lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
713 mutex_unlock(&data->update_lock);
714 return count;
715}
716
717static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
718 *attr, char *buf)
719{
720 int nr = to_sensor_dev_attr(attr)->index;
721 struct lm85_data *data = lm85_update_device(dev);
722 int pwm_zone, enable;
723
724 pwm_zone = ZONE_FROM_REG(data->autofan[nr].config);
725 switch (pwm_zone) {
726 case -1: /* PWM is always at 100% */
727 enable = 0;
728 break;
729 case 0: /* PWM is always at 0% */
730 case -2: /* PWM responds to manual control */
731 enable = 1;
732 break;
733 default: /* PWM in automatic mode */
734 enable = 2;
735 }
736 return sprintf(buf, "%d\n", enable);
737}
738
739static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
740 *attr, const char *buf, size_t count)
741{
742 int nr = to_sensor_dev_attr(attr)->index;
743 struct lm85_data *data = dev_get_drvdata(dev);
744 struct i2c_client *client = data->client;
745 u8 config;
746 unsigned long val;
747 int err;
748
749 err = kstrtoul(buf, 10, &val);
750 if (err)
751 return err;
752
753 switch (val) {
754 case 0:
755 config = 3;
756 break;
757 case 1:
758 config = 7;
759 break;
760 case 2:
761 /*
762 * Here we have to choose arbitrarily one of the 5 possible
763 * configurations; I go for the safest
764 */
765 config = 6;
766 break;
767 default:
768 return -EINVAL;
769 }
770
771 mutex_lock(&data->update_lock);
772 data->autofan[nr].config = lm85_read_value(client,
773 LM85_REG_AFAN_CONFIG(nr));
774 data->autofan[nr].config = (data->autofan[nr].config & ~0xe0)
775 | (config << 5);
776 lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
777 data->autofan[nr].config);
778 mutex_unlock(&data->update_lock);
779 return count;
780}
781
782static ssize_t show_pwm_freq(struct device *dev,
783 struct device_attribute *attr, char *buf)
784{
785 int nr = to_sensor_dev_attr(attr)->index;
786 struct lm85_data *data = lm85_update_device(dev);
787 int freq;
788
789 if (IS_ADT7468_HFPWM(data))
790 freq = 22500;
791 else
792 freq = FREQ_FROM_REG(data->freq_map, data->pwm_freq[nr]);
793
794 return sprintf(buf, "%d\n", freq);
795}
796
797static ssize_t set_pwm_freq(struct device *dev,
798 struct device_attribute *attr, const char *buf, size_t count)
799{
800 int nr = to_sensor_dev_attr(attr)->index;
801 struct lm85_data *data = dev_get_drvdata(dev);
802 struct i2c_client *client = data->client;
803 unsigned long val;
804 int err;
805
806 err = kstrtoul(buf, 10, &val);
807 if (err)
808 return err;
809
810 mutex_lock(&data->update_lock);
811 /*
812 * The ADT7468 has a special high-frequency PWM output mode,
813 * where all PWM outputs are driven by a 22.5 kHz clock.
814 * This might confuse the user, but there's not much we can do.
815 */
816 if (data->type == adt7468 && val >= 11300) { /* High freq. mode */
817 data->cfg5 &= ~ADT7468_HFPWM;
818 lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
819 } else { /* Low freq. mode */
820 data->pwm_freq[nr] = FREQ_TO_REG(data->freq_map,
821 FREQ_MAP_LEN, val);
822 lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
823 (data->zone[nr].range << 4)
824 | data->pwm_freq[nr]);
825 if (data->type == adt7468) {
826 data->cfg5 |= ADT7468_HFPWM;
827 lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
828 }
829 }
830 mutex_unlock(&data->update_lock);
831 return count;
832}
833
834#define show_pwm_reg(offset) \
835static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
836 show_pwm, set_pwm, offset - 1); \
837static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
838 show_pwm_enable, set_pwm_enable, offset - 1); \
839static SENSOR_DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR, \
840 show_pwm_freq, set_pwm_freq, offset - 1)
841
842show_pwm_reg(1);
843show_pwm_reg(2);
844show_pwm_reg(3);
845
846/* Voltages */
847
848static ssize_t show_in(struct device *dev, struct device_attribute *attr,
849 char *buf)
850{
851 int nr = to_sensor_dev_attr(attr)->index;
852 struct lm85_data *data = lm85_update_device(dev);
853 return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr],
854 data->in_ext[nr]));
855}
856
857static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
858 char *buf)
859{
860 int nr = to_sensor_dev_attr(attr)->index;
861 struct lm85_data *data = lm85_update_device(dev);
862 return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr]));
863}
864
865static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
866 const char *buf, size_t count)
867{
868 int nr = to_sensor_dev_attr(attr)->index;
869 struct lm85_data *data = dev_get_drvdata(dev);
870 struct i2c_client *client = data->client;
871 long val;
872 int err;
873
874 err = kstrtol(buf, 10, &val);
875 if (err)
876 return err;
877
878 mutex_lock(&data->update_lock);
879 data->in_min[nr] = INS_TO_REG(nr, val);
880 lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
881 mutex_unlock(&data->update_lock);
882 return count;
883}
884
885static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
886 char *buf)
887{
888 int nr = to_sensor_dev_attr(attr)->index;
889 struct lm85_data *data = lm85_update_device(dev);
890 return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr]));
891}
892
893static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
894 const char *buf, size_t count)
895{
896 int nr = to_sensor_dev_attr(attr)->index;
897 struct lm85_data *data = dev_get_drvdata(dev);
898 struct i2c_client *client = data->client;
899 long val;
900 int err;
901
902 err = kstrtol(buf, 10, &val);
903 if (err)
904 return err;
905
906 mutex_lock(&data->update_lock);
907 data->in_max[nr] = INS_TO_REG(nr, val);
908 lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
909 mutex_unlock(&data->update_lock);
910 return count;
911}
912
913#define show_in_reg(offset) \
914static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
915 show_in, NULL, offset); \
916static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
917 show_in_min, set_in_min, offset); \
918static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
919 show_in_max, set_in_max, offset)
920
921show_in_reg(0);
922show_in_reg(1);
923show_in_reg(2);
924show_in_reg(3);
925show_in_reg(4);
926show_in_reg(5);
927show_in_reg(6);
928show_in_reg(7);
929
930/* Temps */
931
932static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
933 char *buf)
934{
935 int nr = to_sensor_dev_attr(attr)->index;
936 struct lm85_data *data = lm85_update_device(dev);
937 return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr],
938 data->temp_ext[nr]));
939}
940
941static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
942 char *buf)
943{
944 int nr = to_sensor_dev_attr(attr)->index;
945 struct lm85_data *data = lm85_update_device(dev);
946 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
947}
948
949static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
950 const char *buf, size_t count)
951{
952 int nr = to_sensor_dev_attr(attr)->index;
953 struct lm85_data *data = dev_get_drvdata(dev);
954 struct i2c_client *client = data->client;
955 long val;
956 int err;
957
958 err = kstrtol(buf, 10, &val);
959 if (err)
960 return err;
961
962 if (IS_ADT7468_OFF64(data))
963 val += 64;
964
965 mutex_lock(&data->update_lock);
966 data->temp_min[nr] = TEMP_TO_REG(val);
967 lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
968 mutex_unlock(&data->update_lock);
969 return count;
970}
971
972static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
973 char *buf)
974{
975 int nr = to_sensor_dev_attr(attr)->index;
976 struct lm85_data *data = lm85_update_device(dev);
977 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
978}
979
980static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
981 const char *buf, size_t count)
982{
983 int nr = to_sensor_dev_attr(attr)->index;
984 struct lm85_data *data = dev_get_drvdata(dev);
985 struct i2c_client *client = data->client;
986 long val;
987 int err;
988
989 err = kstrtol(buf, 10, &val);
990 if (err)
991 return err;
992
993 if (IS_ADT7468_OFF64(data))
994 val += 64;
995
996 mutex_lock(&data->update_lock);
997 data->temp_max[nr] = TEMP_TO_REG(val);
998 lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
999 mutex_unlock(&data->update_lock);
1000 return count;
1001}
1002
1003#define show_temp_reg(offset) \
1004static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
1005 show_temp, NULL, offset - 1); \
1006static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
1007 show_temp_min, set_temp_min, offset - 1); \
1008static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
1009 show_temp_max, set_temp_max, offset - 1);
1010
1011show_temp_reg(1);
1012show_temp_reg(2);
1013show_temp_reg(3);
1014
1015
1016/* Automatic PWM control */
1017
1018static ssize_t show_pwm_auto_channels(struct device *dev,
1019 struct device_attribute *attr, char *buf)
1020{
1021 int nr = to_sensor_dev_attr(attr)->index;
1022 struct lm85_data *data = lm85_update_device(dev);
1023 return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config));
1024}
1025
1026static ssize_t set_pwm_auto_channels(struct device *dev,
1027 struct device_attribute *attr, const char *buf, size_t count)
1028{
1029 int nr = to_sensor_dev_attr(attr)->index;
1030 struct lm85_data *data = dev_get_drvdata(dev);
1031 struct i2c_client *client = data->client;
1032 long val;
1033 int err;
1034
1035 err = kstrtol(buf, 10, &val);
1036 if (err)
1037 return err;
1038
1039 mutex_lock(&data->update_lock);
1040 data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
1041 | ZONE_TO_REG(val);
1042 lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
1043 data->autofan[nr].config);
1044 mutex_unlock(&data->update_lock);
1045 return count;
1046}
1047
1048static ssize_t show_pwm_auto_pwm_min(struct device *dev,
1049 struct device_attribute *attr, char *buf)
1050{
1051 int nr = to_sensor_dev_attr(attr)->index;
1052 struct lm85_data *data = lm85_update_device(dev);
1053 return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
1054}
1055
1056static ssize_t set_pwm_auto_pwm_min(struct device *dev,
1057 struct device_attribute *attr, const char *buf, size_t count)
1058{
1059 int nr = to_sensor_dev_attr(attr)->index;
1060 struct lm85_data *data = dev_get_drvdata(dev);
1061 struct i2c_client *client = data->client;
1062 unsigned long val;
1063 int err;
1064
1065 err = kstrtoul(buf, 10, &val);
1066 if (err)
1067 return err;
1068
1069 mutex_lock(&data->update_lock);
1070 data->autofan[nr].min_pwm = PWM_TO_REG(val);
1071 lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
1072 data->autofan[nr].min_pwm);
1073 mutex_unlock(&data->update_lock);
1074 return count;
1075}
1076
1077static ssize_t show_pwm_auto_pwm_minctl(struct device *dev,
1078 struct device_attribute *attr, char *buf)
1079{
1080 int nr = to_sensor_dev_attr(attr)->index;
1081 struct lm85_data *data = lm85_update_device(dev);
1082 return sprintf(buf, "%d\n", data->autofan[nr].min_off);
1083}
1084
1085static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
1086 struct device_attribute *attr, const char *buf, size_t count)
1087{
1088 int nr = to_sensor_dev_attr(attr)->index;
1089 struct lm85_data *data = dev_get_drvdata(dev);
1090 struct i2c_client *client = data->client;
1091 u8 tmp;
1092 long val;
1093 int err;
1094
1095 err = kstrtol(buf, 10, &val);
1096 if (err)
1097 return err;
1098
1099 mutex_lock(&data->update_lock);
1100 data->autofan[nr].min_off = val;
1101 tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
1102 tmp &= ~(0x20 << nr);
1103 if (data->autofan[nr].min_off)
1104 tmp |= 0x20 << nr;
1105 lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp);
1106 mutex_unlock(&data->update_lock);
1107 return count;
1108}
1109
1110#define pwm_auto(offset) \
1111static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels, \
1112 S_IRUGO | S_IWUSR, show_pwm_auto_channels, \
1113 set_pwm_auto_channels, offset - 1); \
1114static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_min, \
1115 S_IRUGO | S_IWUSR, show_pwm_auto_pwm_min, \
1116 set_pwm_auto_pwm_min, offset - 1); \
1117static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, \
1118 S_IRUGO | S_IWUSR, show_pwm_auto_pwm_minctl, \
1119 set_pwm_auto_pwm_minctl, offset - 1)
1120
1121pwm_auto(1);
1122pwm_auto(2);
1123pwm_auto(3);
1124
1125/* Temperature settings for automatic PWM control */
1126
1127static ssize_t show_temp_auto_temp_off(struct device *dev,
1128 struct device_attribute *attr, char *buf)
1129{
1130 int nr = to_sensor_dev_attr(attr)->index;
1131 struct lm85_data *data = lm85_update_device(dev);
1132 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
1133 HYST_FROM_REG(data->zone[nr].hyst));
1134}
1135
1136static ssize_t set_temp_auto_temp_off(struct device *dev,
1137 struct device_attribute *attr, const char *buf, size_t count)
1138{
1139 int nr = to_sensor_dev_attr(attr)->index;
1140 struct lm85_data *data = dev_get_drvdata(dev);
1141 struct i2c_client *client = data->client;
1142 int min;
1143 long val;
1144 int err;
1145
1146 err = kstrtol(buf, 10, &val);
1147 if (err)
1148 return err;
1149
1150 mutex_lock(&data->update_lock);
1151 min = TEMP_FROM_REG(data->zone[nr].limit);
1152 data->zone[nr].hyst = HYST_TO_REG(min - val);
1153 if (nr == 0 || nr == 1) {
1154 lm85_write_value(client, LM85_REG_AFAN_HYST1,
1155 (data->zone[0].hyst << 4)
1156 | data->zone[1].hyst);
1157 } else {
1158 lm85_write_value(client, LM85_REG_AFAN_HYST2,
1159 (data->zone[2].hyst << 4));
1160 }
1161 mutex_unlock(&data->update_lock);
1162 return count;
1163}
1164
1165static ssize_t show_temp_auto_temp_min(struct device *dev,
1166 struct device_attribute *attr, char *buf)
1167{
1168 int nr = to_sensor_dev_attr(attr)->index;
1169 struct lm85_data *data = lm85_update_device(dev);
1170 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit));
1171}
1172
1173static ssize_t set_temp_auto_temp_min(struct device *dev,
1174 struct device_attribute *attr, const char *buf, size_t count)
1175{
1176 int nr = to_sensor_dev_attr(attr)->index;
1177 struct lm85_data *data = dev_get_drvdata(dev);
1178 struct i2c_client *client = data->client;
1179 long val;
1180 int err;
1181
1182 err = kstrtol(buf, 10, &val);
1183 if (err)
1184 return err;
1185
1186 mutex_lock(&data->update_lock);
1187 data->zone[nr].limit = TEMP_TO_REG(val);
1188 lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
1189 data->zone[nr].limit);
1190
1191/* Update temp_auto_max and temp_auto_range */
1192 data->zone[nr].range = RANGE_TO_REG(
1193 TEMP_FROM_REG(data->zone[nr].max_desired) -
1194 TEMP_FROM_REG(data->zone[nr].limit));
1195 lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
1196 ((data->zone[nr].range & 0x0f) << 4)
1197 | (data->pwm_freq[nr] & 0x07));
1198
1199 mutex_unlock(&data->update_lock);
1200 return count;
1201}
1202
1203static ssize_t show_temp_auto_temp_max(struct device *dev,
1204 struct device_attribute *attr, char *buf)
1205{
1206 int nr = to_sensor_dev_attr(attr)->index;
1207 struct lm85_data *data = lm85_update_device(dev);
1208 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
1209 RANGE_FROM_REG(data->zone[nr].range));
1210}
1211
1212static ssize_t set_temp_auto_temp_max(struct device *dev,
1213 struct device_attribute *attr, const char *buf, size_t count)
1214{
1215 int nr = to_sensor_dev_attr(attr)->index;
1216 struct lm85_data *data = dev_get_drvdata(dev);
1217 struct i2c_client *client = data->client;
1218 int min;
1219 long val;
1220 int err;
1221
1222 err = kstrtol(buf, 10, &val);
1223 if (err)
1224 return err;
1225
1226 mutex_lock(&data->update_lock);
1227 min = TEMP_FROM_REG(data->zone[nr].limit);
1228 data->zone[nr].max_desired = TEMP_TO_REG(val);
1229 data->zone[nr].range = RANGE_TO_REG(
1230 val - min);
1231 lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
1232 ((data->zone[nr].range & 0x0f) << 4)
1233 | (data->pwm_freq[nr] & 0x07));
1234 mutex_unlock(&data->update_lock);
1235 return count;
1236}
1237
1238static ssize_t show_temp_auto_temp_crit(struct device *dev,
1239 struct device_attribute *attr, char *buf)
1240{
1241 int nr = to_sensor_dev_attr(attr)->index;
1242 struct lm85_data *data = lm85_update_device(dev);
1243 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical));
1244}
1245
1246static ssize_t set_temp_auto_temp_crit(struct device *dev,
1247 struct device_attribute *attr, const char *buf, size_t count)
1248{
1249 int nr = to_sensor_dev_attr(attr)->index;
1250 struct lm85_data *data = dev_get_drvdata(dev);
1251 struct i2c_client *client = data->client;
1252 long val;
1253 int err;
1254
1255 err = kstrtol(buf, 10, &val);
1256 if (err)
1257 return err;
1258
1259 mutex_lock(&data->update_lock);
1260 data->zone[nr].critical = TEMP_TO_REG(val);
1261 lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
1262 data->zone[nr].critical);
1263 mutex_unlock(&data->update_lock);
1264 return count;
1265}
1266
1267#define temp_auto(offset) \
1268static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_off, \
1269 S_IRUGO | S_IWUSR, show_temp_auto_temp_off, \
1270 set_temp_auto_temp_off, offset - 1); \
1271static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_min, \
1272 S_IRUGO | S_IWUSR, show_temp_auto_temp_min, \
1273 set_temp_auto_temp_min, offset - 1); \
1274static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_max, \
1275 S_IRUGO | S_IWUSR, show_temp_auto_temp_max, \
1276 set_temp_auto_temp_max, offset - 1); \
1277static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_crit, \
1278 S_IRUGO | S_IWUSR, show_temp_auto_temp_crit, \
1279 set_temp_auto_temp_crit, offset - 1);
1280
1281temp_auto(1);
1282temp_auto(2);
1283temp_auto(3);
1284
1285static struct attribute *lm85_attributes[] = {
1286 &sensor_dev_attr_fan1_input.dev_attr.attr,
1287 &sensor_dev_attr_fan2_input.dev_attr.attr,
1288 &sensor_dev_attr_fan3_input.dev_attr.attr,
1289 &sensor_dev_attr_fan4_input.dev_attr.attr,
1290 &sensor_dev_attr_fan1_min.dev_attr.attr,
1291 &sensor_dev_attr_fan2_min.dev_attr.attr,
1292 &sensor_dev_attr_fan3_min.dev_attr.attr,
1293 &sensor_dev_attr_fan4_min.dev_attr.attr,
1294 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1295 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1296 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1297 &sensor_dev_attr_fan4_alarm.dev_attr.attr,
1298
1299 &sensor_dev_attr_pwm1.dev_attr.attr,
1300 &sensor_dev_attr_pwm2.dev_attr.attr,
1301 &sensor_dev_attr_pwm3.dev_attr.attr,
1302 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1303 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1304 &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1305 &sensor_dev_attr_pwm1_freq.dev_attr.attr,
1306 &sensor_dev_attr_pwm2_freq.dev_attr.attr,
1307 &sensor_dev_attr_pwm3_freq.dev_attr.attr,
1308
1309 &sensor_dev_attr_in0_input.dev_attr.attr,
1310 &sensor_dev_attr_in1_input.dev_attr.attr,
1311 &sensor_dev_attr_in2_input.dev_attr.attr,
1312 &sensor_dev_attr_in3_input.dev_attr.attr,
1313 &sensor_dev_attr_in0_min.dev_attr.attr,
1314 &sensor_dev_attr_in1_min.dev_attr.attr,
1315 &sensor_dev_attr_in2_min.dev_attr.attr,
1316 &sensor_dev_attr_in3_min.dev_attr.attr,
1317 &sensor_dev_attr_in0_max.dev_attr.attr,
1318 &sensor_dev_attr_in1_max.dev_attr.attr,
1319 &sensor_dev_attr_in2_max.dev_attr.attr,
1320 &sensor_dev_attr_in3_max.dev_attr.attr,
1321 &sensor_dev_attr_in0_alarm.dev_attr.attr,
1322 &sensor_dev_attr_in1_alarm.dev_attr.attr,
1323 &sensor_dev_attr_in2_alarm.dev_attr.attr,
1324 &sensor_dev_attr_in3_alarm.dev_attr.attr,
1325
1326 &sensor_dev_attr_temp1_input.dev_attr.attr,
1327 &sensor_dev_attr_temp2_input.dev_attr.attr,
1328 &sensor_dev_attr_temp3_input.dev_attr.attr,
1329 &sensor_dev_attr_temp1_min.dev_attr.attr,
1330 &sensor_dev_attr_temp2_min.dev_attr.attr,
1331 &sensor_dev_attr_temp3_min.dev_attr.attr,
1332 &sensor_dev_attr_temp1_max.dev_attr.attr,
1333 &sensor_dev_attr_temp2_max.dev_attr.attr,
1334 &sensor_dev_attr_temp3_max.dev_attr.attr,
1335 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
1336 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
1337 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1338 &sensor_dev_attr_temp1_fault.dev_attr.attr,
1339 &sensor_dev_attr_temp3_fault.dev_attr.attr,
1340
1341 &sensor_dev_attr_pwm1_auto_channels.dev_attr.attr,
1342 &sensor_dev_attr_pwm2_auto_channels.dev_attr.attr,
1343 &sensor_dev_attr_pwm3_auto_channels.dev_attr.attr,
1344 &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
1345 &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
1346 &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
1347
1348 &sensor_dev_attr_temp1_auto_temp_min.dev_attr.attr,
1349 &sensor_dev_attr_temp2_auto_temp_min.dev_attr.attr,
1350 &sensor_dev_attr_temp3_auto_temp_min.dev_attr.attr,
1351 &sensor_dev_attr_temp1_auto_temp_max.dev_attr.attr,
1352 &sensor_dev_attr_temp2_auto_temp_max.dev_attr.attr,
1353 &sensor_dev_attr_temp3_auto_temp_max.dev_attr.attr,
1354 &sensor_dev_attr_temp1_auto_temp_crit.dev_attr.attr,
1355 &sensor_dev_attr_temp2_auto_temp_crit.dev_attr.attr,
1356 &sensor_dev_attr_temp3_auto_temp_crit.dev_attr.attr,
1357
1358 &dev_attr_vrm.attr,
1359 &dev_attr_cpu0_vid.attr,
1360 &dev_attr_alarms.attr,
1361 NULL
1362};
1363
1364static const struct attribute_group lm85_group = {
1365 .attrs = lm85_attributes,
1366};
1367
1368static struct attribute *lm85_attributes_minctl[] = {
1369 &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
1370 &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
1371 &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
1372 NULL
1373};
1374
1375static const struct attribute_group lm85_group_minctl = {
1376 .attrs = lm85_attributes_minctl,
1377};
1378
1379static struct attribute *lm85_attributes_temp_off[] = {
1380 &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
1381 &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
1382 &sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
1383 NULL
1384};
1385
1386static const struct attribute_group lm85_group_temp_off = {
1387 .attrs = lm85_attributes_temp_off,
1388};
1389
1390static struct attribute *lm85_attributes_in4[] = {
1391 &sensor_dev_attr_in4_input.dev_attr.attr,
1392 &sensor_dev_attr_in4_min.dev_attr.attr,
1393 &sensor_dev_attr_in4_max.dev_attr.attr,
1394 &sensor_dev_attr_in4_alarm.dev_attr.attr,
1395 NULL
1396};
1397
1398static const struct attribute_group lm85_group_in4 = {
1399 .attrs = lm85_attributes_in4,
1400};
1401
1402static struct attribute *lm85_attributes_in567[] = {
1403 &sensor_dev_attr_in5_input.dev_attr.attr,
1404 &sensor_dev_attr_in6_input.dev_attr.attr,
1405 &sensor_dev_attr_in7_input.dev_attr.attr,
1406 &sensor_dev_attr_in5_min.dev_attr.attr,
1407 &sensor_dev_attr_in6_min.dev_attr.attr,
1408 &sensor_dev_attr_in7_min.dev_attr.attr,
1409 &sensor_dev_attr_in5_max.dev_attr.attr,
1410 &sensor_dev_attr_in6_max.dev_attr.attr,
1411 &sensor_dev_attr_in7_max.dev_attr.attr,
1412 &sensor_dev_attr_in5_alarm.dev_attr.attr,
1413 &sensor_dev_attr_in6_alarm.dev_attr.attr,
1414 &sensor_dev_attr_in7_alarm.dev_attr.attr,
1415 NULL
1416};
1417
1418static const struct attribute_group lm85_group_in567 = {
1419 .attrs = lm85_attributes_in567,
1420};
1421
1422static void lm85_init_client(struct i2c_client *client)
1423{
1424 int value;
1425
1426 /* Start monitoring if needed */
1427 value = lm85_read_value(client, LM85_REG_CONFIG);
1428 if (!(value & 0x01)) {
1429 dev_info(&client->dev, "Starting monitoring\n");
1430 lm85_write_value(client, LM85_REG_CONFIG, value | 0x01);
1431 }
1432
1433 /* Warn about unusual configuration bits */
1434 if (value & 0x02)
1435 dev_warn(&client->dev, "Device configuration is locked\n");
1436 if (!(value & 0x04))
1437 dev_warn(&client->dev, "Device is not ready\n");
1438}
1439
1440static int lm85_is_fake(struct i2c_client *client)
1441{
1442 /*
1443 * Differenciate between real LM96000 and Winbond WPCD377I. The latter
1444 * emulate the former except that it has no hardware monitoring function
1445 * so the readings are always 0.
1446 */
1447 int i;
1448 u8 in_temp, fan;
1449
1450 for (i = 0; i < 8; i++) {
1451 in_temp = i2c_smbus_read_byte_data(client, 0x20 + i);
1452 fan = i2c_smbus_read_byte_data(client, 0x28 + i);
1453 if (in_temp != 0x00 || fan != 0xff)
1454 return 0;
1455 }
1456
1457 return 1;
1458}
1459
1460/* Return 0 if detection is successful, -ENODEV otherwise */
1461static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
1462{
1463 struct i2c_adapter *adapter = client->adapter;
1464 int address = client->addr;
1465 const char *type_name = NULL;
1466 int company, verstep;
1467
1468 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1469 /* We need to be able to do byte I/O */
1470 return -ENODEV;
1471 }
1472
1473 /* Determine the chip type */
1474 company = lm85_read_value(client, LM85_REG_COMPANY);
1475 verstep = lm85_read_value(client, LM85_REG_VERSTEP);
1476
1477 dev_dbg(&adapter->dev,
1478 "Detecting device at 0x%02x with COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
1479 address, company, verstep);
1480
1481 if (company == LM85_COMPANY_NATIONAL) {
1482 switch (verstep) {
1483 case LM85_VERSTEP_LM85C:
1484 type_name = "lm85c";
1485 break;
1486 case LM85_VERSTEP_LM85B:
1487 type_name = "lm85b";
1488 break;
1489 case LM85_VERSTEP_LM96000_1:
1490 case LM85_VERSTEP_LM96000_2:
1491 /* Check for Winbond WPCD377I */
1492 if (lm85_is_fake(client)) {
1493 dev_dbg(&adapter->dev,
1494 "Found Winbond WPCD377I, ignoring\n");
1495 return -ENODEV;
1496 }
1497 type_name = "lm85";
1498 break;
1499 }
1500 } else if (company == LM85_COMPANY_ANALOG_DEV) {
1501 switch (verstep) {
1502 case LM85_VERSTEP_ADM1027:
1503 type_name = "adm1027";
1504 break;
1505 case LM85_VERSTEP_ADT7463:
1506 case LM85_VERSTEP_ADT7463C:
1507 type_name = "adt7463";
1508 break;
1509 case LM85_VERSTEP_ADT7468_1:
1510 case LM85_VERSTEP_ADT7468_2:
1511 type_name = "adt7468";
1512 break;
1513 }
1514 } else if (company == LM85_COMPANY_SMSC) {
1515 switch (verstep) {
1516 case LM85_VERSTEP_EMC6D100_A0:
1517 case LM85_VERSTEP_EMC6D100_A1:
1518 /* Note: we can't tell a '100 from a '101 */
1519 type_name = "emc6d100";
1520 break;
1521 case LM85_VERSTEP_EMC6D102:
1522 type_name = "emc6d102";
1523 break;
1524 case LM85_VERSTEP_EMC6D103_A0:
1525 case LM85_VERSTEP_EMC6D103_A1:
1526 type_name = "emc6d103";
1527 break;
1528 case LM85_VERSTEP_EMC6D103S:
1529 type_name = "emc6d103s";
1530 break;
1531 }
1532 }
1533
1534 if (!type_name)
1535 return -ENODEV;
1536
1537 strlcpy(info->type, type_name, I2C_NAME_SIZE);
1538
1539 return 0;
1540}
1541
1542static int lm85_probe(struct i2c_client *client, const struct i2c_device_id *id)
1543{
1544 struct device *dev = &client->dev;
1545 struct device *hwmon_dev;
1546 struct lm85_data *data;
1547 int idx = 0;
1548
1549 data = devm_kzalloc(dev, sizeof(struct lm85_data), GFP_KERNEL);
1550 if (!data)
1551 return -ENOMEM;
1552
1553 data->client = client;
1554 data->type = id->driver_data;
1555 mutex_init(&data->update_lock);
1556
1557 /* Fill in the chip specific driver values */
1558 switch (data->type) {
1559 case adm1027:
1560 case adt7463:
1561 case adt7468:
1562 case emc6d100:
1563 case emc6d102:
1564 case emc6d103:
1565 case emc6d103s:
1566 data->freq_map = adm1027_freq_map;
1567 break;
1568 default:
1569 data->freq_map = lm85_freq_map;
1570 }
1571
1572 /* Set the VRM version */
1573 data->vrm = vid_which_vrm();
1574
1575 /* Initialize the LM85 chip */
1576 lm85_init_client(client);
1577
1578 /* sysfs hooks */
1579 data->groups[idx++] = &lm85_group;
1580
1581 /* minctl and temp_off exist on all chips except emc6d103s */
1582 if (data->type != emc6d103s) {
1583 data->groups[idx++] = &lm85_group_minctl;
1584 data->groups[idx++] = &lm85_group_temp_off;
1585 }
1586
1587 /*
1588 * The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
1589 * as a sixth digital VID input rather than an analog input.
1590 */
1591 if (data->type == adt7463 || data->type == adt7468) {
1592 u8 vid = lm85_read_value(client, LM85_REG_VID);
1593 if (vid & 0x80)
1594 data->has_vid5 = true;
1595 }
1596
1597 if (!data->has_vid5)
1598 data->groups[idx++] = &lm85_group_in4;
1599
1600 /* The EMC6D100 has 3 additional voltage inputs */
1601 if (data->type == emc6d100)
1602 data->groups[idx++] = &lm85_group_in567;
1603
1604 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
1605 data, data->groups);
1606 return PTR_ERR_OR_ZERO(hwmon_dev);
1607}
1608
1609static const struct i2c_device_id lm85_id[] = {
1610 { "adm1027", adm1027 },
1611 { "adt7463", adt7463 },
1612 { "adt7468", adt7468 },
1613 { "lm85", lm85 },
1614 { "lm85b", lm85 },
1615 { "lm85c", lm85 },
1616 { "emc6d100", emc6d100 },
1617 { "emc6d101", emc6d100 },
1618 { "emc6d102", emc6d102 },
1619 { "emc6d103", emc6d103 },
1620 { "emc6d103s", emc6d103s },
1621 { }
1622};
1623MODULE_DEVICE_TABLE(i2c, lm85_id);
1624
1625static struct i2c_driver lm85_driver = {
1626 .class = I2C_CLASS_HWMON,
1627 .driver = {
1628 .name = "lm85",
1629 },
1630 .probe = lm85_probe,
1631 .id_table = lm85_id,
1632 .detect = lm85_detect,
1633 .address_list = normal_i2c,
1634};
1635
1636module_i2c_driver(lm85_driver);
1637
1638MODULE_LICENSE("GPL");
1639MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
1640 "Margit Schubert-While <margitsw@t-online.de>, "
1641 "Justin Thiessen <jthiessen@penguincomputing.com>");
1642MODULE_DESCRIPTION("LM85-B, LM85-C driver");
1/*
2 lm85.c - Part of lm_sensors, Linux kernel modules for hardware
3 monitoring
4 Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
5 Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
6 Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
7 Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
8 Copyright (C) 2007--2009 Jean Delvare <khali@linux-fr.org>
9
10 Chip details at <http://www.national.com/ds/LM/LM85.pdf>
11
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25*/
26
27#include <linux/module.h>
28#include <linux/init.h>
29#include <linux/slab.h>
30#include <linux/jiffies.h>
31#include <linux/i2c.h>
32#include <linux/hwmon.h>
33#include <linux/hwmon-vid.h>
34#include <linux/hwmon-sysfs.h>
35#include <linux/err.h>
36#include <linux/mutex.h>
37
38/* Addresses to scan */
39static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
40
41enum chips {
42 any_chip, lm85b, lm85c,
43 adm1027, adt7463, adt7468,
44 emc6d100, emc6d102, emc6d103, emc6d103s
45};
46
47/* The LM85 registers */
48
49#define LM85_REG_IN(nr) (0x20 + (nr))
50#define LM85_REG_IN_MIN(nr) (0x44 + (nr) * 2)
51#define LM85_REG_IN_MAX(nr) (0x45 + (nr) * 2)
52
53#define LM85_REG_TEMP(nr) (0x25 + (nr))
54#define LM85_REG_TEMP_MIN(nr) (0x4e + (nr) * 2)
55#define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2)
56
57/* Fan speeds are LSB, MSB (2 bytes) */
58#define LM85_REG_FAN(nr) (0x28 + (nr) * 2)
59#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) * 2)
60
61#define LM85_REG_PWM(nr) (0x30 + (nr))
62
63#define LM85_REG_COMPANY 0x3e
64#define LM85_REG_VERSTEP 0x3f
65
66#define ADT7468_REG_CFG5 0x7c
67#define ADT7468_OFF64 (1 << 0)
68#define ADT7468_HFPWM (1 << 1)
69#define IS_ADT7468_OFF64(data) \
70 ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64))
71#define IS_ADT7468_HFPWM(data) \
72 ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_HFPWM))
73
74/* These are the recognized values for the above regs */
75#define LM85_COMPANY_NATIONAL 0x01
76#define LM85_COMPANY_ANALOG_DEV 0x41
77#define LM85_COMPANY_SMSC 0x5c
78#define LM85_VERSTEP_VMASK 0xf0
79#define LM85_VERSTEP_GENERIC 0x60
80#define LM85_VERSTEP_GENERIC2 0x70
81#define LM85_VERSTEP_LM85C 0x60
82#define LM85_VERSTEP_LM85B 0x62
83#define LM85_VERSTEP_LM96000_1 0x68
84#define LM85_VERSTEP_LM96000_2 0x69
85#define LM85_VERSTEP_ADM1027 0x60
86#define LM85_VERSTEP_ADT7463 0x62
87#define LM85_VERSTEP_ADT7463C 0x6A
88#define LM85_VERSTEP_ADT7468_1 0x71
89#define LM85_VERSTEP_ADT7468_2 0x72
90#define LM85_VERSTEP_EMC6D100_A0 0x60
91#define LM85_VERSTEP_EMC6D100_A1 0x61
92#define LM85_VERSTEP_EMC6D102 0x65
93#define LM85_VERSTEP_EMC6D103_A0 0x68
94#define LM85_VERSTEP_EMC6D103_A1 0x69
95#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */
96
97#define LM85_REG_CONFIG 0x40
98
99#define LM85_REG_ALARM1 0x41
100#define LM85_REG_ALARM2 0x42
101
102#define LM85_REG_VID 0x43
103
104/* Automated FAN control */
105#define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr))
106#define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr))
107#define LM85_REG_AFAN_SPIKE1 0x62
108#define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr))
109#define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr))
110#define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr))
111#define LM85_REG_AFAN_HYST1 0x6d
112#define LM85_REG_AFAN_HYST2 0x6e
113
114#define ADM1027_REG_EXTEND_ADC1 0x76
115#define ADM1027_REG_EXTEND_ADC2 0x77
116
117#define EMC6D100_REG_ALARM3 0x7d
118/* IN5, IN6 and IN7 */
119#define EMC6D100_REG_IN(nr) (0x70 + ((nr) - 5))
120#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr) - 5) * 2)
121#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr) - 5) * 2)
122#define EMC6D102_REG_EXTEND_ADC1 0x85
123#define EMC6D102_REG_EXTEND_ADC2 0x86
124#define EMC6D102_REG_EXTEND_ADC3 0x87
125#define EMC6D102_REG_EXTEND_ADC4 0x88
126
127
128/* Conversions. Rounding and limit checking is only done on the TO_REG
129 variants. Note that you should be a bit careful with which arguments
130 these macros are called: arguments may be evaluated more than once.
131 */
132
133/* IN are scaled according to built-in resistors */
134static const int lm85_scaling[] = { /* .001 Volts */
135 2500, 2250, 3300, 5000, 12000,
136 3300, 1500, 1800 /*EMC6D100*/
137};
138#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from))
139
140#define INS_TO_REG(n, val) \
141 SENSORS_LIMIT(SCALE(val, lm85_scaling[n], 192), 0, 255)
142
143#define INSEXT_FROM_REG(n, val, ext) \
144 SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n])
145
146#define INS_FROM_REG(n, val) SCALE((val), 192, lm85_scaling[n])
147
148/* FAN speed is measured using 90kHz clock */
149static inline u16 FAN_TO_REG(unsigned long val)
150{
151 if (!val)
152 return 0xffff;
153 return SENSORS_LIMIT(5400000 / val, 1, 0xfffe);
154}
155#define FAN_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
156 5400000 / (val))
157
158/* Temperature is reported in .001 degC increments */
159#define TEMP_TO_REG(val) \
160 SENSORS_LIMIT(SCALE(val, 1000, 1), -127, 127)
161#define TEMPEXT_FROM_REG(val, ext) \
162 SCALE(((val) << 4) + (ext), 16, 1000)
163#define TEMP_FROM_REG(val) ((val) * 1000)
164
165#define PWM_TO_REG(val) SENSORS_LIMIT(val, 0, 255)
166#define PWM_FROM_REG(val) (val)
167
168
169/* ZONEs have the following parameters:
170 * Limit (low) temp, 1. degC
171 * Hysteresis (below limit), 1. degC (0-15)
172 * Range of speed control, .1 degC (2-80)
173 * Critical (high) temp, 1. degC
174 *
175 * FAN PWMs have the following parameters:
176 * Reference Zone, 1, 2, 3, etc.
177 * Spinup time, .05 sec
178 * PWM value at limit/low temp, 1 count
179 * PWM Frequency, 1. Hz
180 * PWM is Min or OFF below limit, flag
181 * Invert PWM output, flag
182 *
183 * Some chips filter the temp, others the fan.
184 * Filter constant (or disabled) .1 seconds
185 */
186
187/* These are the zone temperature range encodings in .001 degree C */
188static const int lm85_range_map[] = {
189 2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000,
190 13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000
191};
192
193static int RANGE_TO_REG(int range)
194{
195 int i;
196
197 /* Find the closest match */
198 for (i = 0; i < 15; ++i) {
199 if (range <= (lm85_range_map[i] + lm85_range_map[i + 1]) / 2)
200 break;
201 }
202
203 return i;
204}
205#define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f]
206
207/* These are the PWM frequency encodings */
208static const int lm85_freq_map[8] = { /* 1 Hz */
209 10, 15, 23, 30, 38, 47, 61, 94
210};
211static const int adm1027_freq_map[8] = { /* 1 Hz */
212 11, 15, 22, 29, 35, 44, 59, 88
213};
214
215static int FREQ_TO_REG(const int *map, int freq)
216{
217 int i;
218
219 /* Find the closest match */
220 for (i = 0; i < 7; ++i)
221 if (freq <= (map[i] + map[i + 1]) / 2)
222 break;
223 return i;
224}
225
226static int FREQ_FROM_REG(const int *map, u8 reg)
227{
228 return map[reg & 0x07];
229}
230
231/* Since we can't use strings, I'm abusing these numbers
232 * to stand in for the following meanings:
233 * 1 -- PWM responds to Zone 1
234 * 2 -- PWM responds to Zone 2
235 * 3 -- PWM responds to Zone 3
236 * 23 -- PWM responds to the higher temp of Zone 2 or 3
237 * 123 -- PWM responds to highest of Zone 1, 2, or 3
238 * 0 -- PWM is always at 0% (ie, off)
239 * -1 -- PWM is always at 100%
240 * -2 -- PWM responds to manual control
241 */
242
243static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
244#define ZONE_FROM_REG(val) lm85_zone_map[(val) >> 5]
245
246static int ZONE_TO_REG(int zone)
247{
248 int i;
249
250 for (i = 0; i <= 7; ++i)
251 if (zone == lm85_zone_map[i])
252 break;
253 if (i > 7) /* Not found. */
254 i = 3; /* Always 100% */
255 return i << 5;
256}
257
258#define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15)
259#define HYST_FROM_REG(val) ((val) * 1000)
260
261/* Chip sampling rates
262 *
263 * Some sensors are not updated more frequently than once per second
264 * so it doesn't make sense to read them more often than that.
265 * We cache the results and return the saved data if the driver
266 * is called again before a second has elapsed.
267 *
268 * Also, there is significant configuration data for this chip
269 * given the automatic PWM fan control that is possible. There
270 * are about 47 bytes of config data to only 22 bytes of actual
271 * readings. So, we keep the config data up to date in the cache
272 * when it is written and only sample it once every 1 *minute*
273 */
274#define LM85_DATA_INTERVAL (HZ + HZ / 2)
275#define LM85_CONFIG_INTERVAL (1 * 60 * HZ)
276
277/* LM85 can automatically adjust fan speeds based on temperature
278 * This structure encapsulates an entire Zone config. There are
279 * three zones (one for each temperature input) on the lm85
280 */
281struct lm85_zone {
282 s8 limit; /* Low temp limit */
283 u8 hyst; /* Low limit hysteresis. (0-15) */
284 u8 range; /* Temp range, encoded */
285 s8 critical; /* "All fans ON" temp limit */
286 u8 max_desired; /* Actual "max" temperature specified. Preserved
287 * to prevent "drift" as other autofan control
288 * values change.
289 */
290};
291
292struct lm85_autofan {
293 u8 config; /* Register value */
294 u8 min_pwm; /* Minimum PWM value, encoded */
295 u8 min_off; /* Min PWM or OFF below "limit", flag */
296};
297
298/* For each registered chip, we need to keep some data in memory.
299 The structure is dynamically allocated. */
300struct lm85_data {
301 struct device *hwmon_dev;
302 const int *freq_map;
303 enum chips type;
304
305 bool has_vid5; /* true if VID5 is configured for ADT7463 or ADT7468 */
306
307 struct mutex update_lock;
308 int valid; /* !=0 if following fields are valid */
309 unsigned long last_reading; /* In jiffies */
310 unsigned long last_config; /* In jiffies */
311
312 u8 in[8]; /* Register value */
313 u8 in_max[8]; /* Register value */
314 u8 in_min[8]; /* Register value */
315 s8 temp[3]; /* Register value */
316 s8 temp_min[3]; /* Register value */
317 s8 temp_max[3]; /* Register value */
318 u16 fan[4]; /* Register value */
319 u16 fan_min[4]; /* Register value */
320 u8 pwm[3]; /* Register value */
321 u8 pwm_freq[3]; /* Register encoding */
322 u8 temp_ext[3]; /* Decoded values */
323 u8 in_ext[8]; /* Decoded values */
324 u8 vid; /* Register value */
325 u8 vrm; /* VRM version */
326 u32 alarms; /* Register encoding, combined */
327 u8 cfg5; /* Config Register 5 on ADT7468 */
328 struct lm85_autofan autofan[3];
329 struct lm85_zone zone[3];
330};
331
332static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info);
333static int lm85_probe(struct i2c_client *client,
334 const struct i2c_device_id *id);
335static int lm85_remove(struct i2c_client *client);
336
337static int lm85_read_value(struct i2c_client *client, u8 reg);
338static void lm85_write_value(struct i2c_client *client, u8 reg, int value);
339static struct lm85_data *lm85_update_device(struct device *dev);
340
341
342static const struct i2c_device_id lm85_id[] = {
343 { "adm1027", adm1027 },
344 { "adt7463", adt7463 },
345 { "adt7468", adt7468 },
346 { "lm85", any_chip },
347 { "lm85b", lm85b },
348 { "lm85c", lm85c },
349 { "emc6d100", emc6d100 },
350 { "emc6d101", emc6d100 },
351 { "emc6d102", emc6d102 },
352 { "emc6d103", emc6d103 },
353 { "emc6d103s", emc6d103s },
354 { }
355};
356MODULE_DEVICE_TABLE(i2c, lm85_id);
357
358static struct i2c_driver lm85_driver = {
359 .class = I2C_CLASS_HWMON,
360 .driver = {
361 .name = "lm85",
362 },
363 .probe = lm85_probe,
364 .remove = lm85_remove,
365 .id_table = lm85_id,
366 .detect = lm85_detect,
367 .address_list = normal_i2c,
368};
369
370
371/* 4 Fans */
372static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
373 char *buf)
374{
375 int nr = to_sensor_dev_attr(attr)->index;
376 struct lm85_data *data = lm85_update_device(dev);
377 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr]));
378}
379
380static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
381 char *buf)
382{
383 int nr = to_sensor_dev_attr(attr)->index;
384 struct lm85_data *data = lm85_update_device(dev);
385 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr]));
386}
387
388static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
389 const char *buf, size_t count)
390{
391 int nr = to_sensor_dev_attr(attr)->index;
392 struct i2c_client *client = to_i2c_client(dev);
393 struct lm85_data *data = i2c_get_clientdata(client);
394 unsigned long val = simple_strtoul(buf, NULL, 10);
395
396 mutex_lock(&data->update_lock);
397 data->fan_min[nr] = FAN_TO_REG(val);
398 lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
399 mutex_unlock(&data->update_lock);
400 return count;
401}
402
403#define show_fan_offset(offset) \
404static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
405 show_fan, NULL, offset - 1); \
406static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
407 show_fan_min, set_fan_min, offset - 1)
408
409show_fan_offset(1);
410show_fan_offset(2);
411show_fan_offset(3);
412show_fan_offset(4);
413
414/* vid, vrm, alarms */
415
416static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
417 char *buf)
418{
419 struct lm85_data *data = lm85_update_device(dev);
420 int vid;
421
422 if (data->has_vid5) {
423 /* 6-pin VID (VRM 10) */
424 vid = vid_from_reg(data->vid & 0x3f, data->vrm);
425 } else {
426 /* 5-pin VID (VRM 9) */
427 vid = vid_from_reg(data->vid & 0x1f, data->vrm);
428 }
429
430 return sprintf(buf, "%d\n", vid);
431}
432
433static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
434
435static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr,
436 char *buf)
437{
438 struct lm85_data *data = dev_get_drvdata(dev);
439 return sprintf(buf, "%ld\n", (long) data->vrm);
440}
441
442static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr,
443 const char *buf, size_t count)
444{
445 struct lm85_data *data = dev_get_drvdata(dev);
446 data->vrm = simple_strtoul(buf, NULL, 10);
447 return count;
448}
449
450static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
451
452static ssize_t show_alarms_reg(struct device *dev, struct device_attribute
453 *attr, char *buf)
454{
455 struct lm85_data *data = lm85_update_device(dev);
456 return sprintf(buf, "%u\n", data->alarms);
457}
458
459static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
460
461static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
462 char *buf)
463{
464 int nr = to_sensor_dev_attr(attr)->index;
465 struct lm85_data *data = lm85_update_device(dev);
466 return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
467}
468
469static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
470static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
471static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
472static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
473static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
474static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 18);
475static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 16);
476static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 17);
477static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
478static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14);
479static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
480static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 6);
481static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15);
482static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 10);
483static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 11);
484static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 12);
485static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 13);
486
487/* pwm */
488
489static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
490 char *buf)
491{
492 int nr = to_sensor_dev_attr(attr)->index;
493 struct lm85_data *data = lm85_update_device(dev);
494 return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
495}
496
497static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
498 const char *buf, size_t count)
499{
500 int nr = to_sensor_dev_attr(attr)->index;
501 struct i2c_client *client = to_i2c_client(dev);
502 struct lm85_data *data = i2c_get_clientdata(client);
503 long val = simple_strtol(buf, NULL, 10);
504
505 mutex_lock(&data->update_lock);
506 data->pwm[nr] = PWM_TO_REG(val);
507 lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
508 mutex_unlock(&data->update_lock);
509 return count;
510}
511
512static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
513 *attr, char *buf)
514{
515 int nr = to_sensor_dev_attr(attr)->index;
516 struct lm85_data *data = lm85_update_device(dev);
517 int pwm_zone, enable;
518
519 pwm_zone = ZONE_FROM_REG(data->autofan[nr].config);
520 switch (pwm_zone) {
521 case -1: /* PWM is always at 100% */
522 enable = 0;
523 break;
524 case 0: /* PWM is always at 0% */
525 case -2: /* PWM responds to manual control */
526 enable = 1;
527 break;
528 default: /* PWM in automatic mode */
529 enable = 2;
530 }
531 return sprintf(buf, "%d\n", enable);
532}
533
534static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
535 *attr, const char *buf, size_t count)
536{
537 int nr = to_sensor_dev_attr(attr)->index;
538 struct i2c_client *client = to_i2c_client(dev);
539 struct lm85_data *data = i2c_get_clientdata(client);
540 long val = simple_strtol(buf, NULL, 10);
541 u8 config;
542
543 switch (val) {
544 case 0:
545 config = 3;
546 break;
547 case 1:
548 config = 7;
549 break;
550 case 2:
551 /* Here we have to choose arbitrarily one of the 5 possible
552 configurations; I go for the safest */
553 config = 6;
554 break;
555 default:
556 return -EINVAL;
557 }
558
559 mutex_lock(&data->update_lock);
560 data->autofan[nr].config = lm85_read_value(client,
561 LM85_REG_AFAN_CONFIG(nr));
562 data->autofan[nr].config = (data->autofan[nr].config & ~0xe0)
563 | (config << 5);
564 lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
565 data->autofan[nr].config);
566 mutex_unlock(&data->update_lock);
567 return count;
568}
569
570static ssize_t show_pwm_freq(struct device *dev,
571 struct device_attribute *attr, char *buf)
572{
573 int nr = to_sensor_dev_attr(attr)->index;
574 struct lm85_data *data = lm85_update_device(dev);
575 int freq;
576
577 if (IS_ADT7468_HFPWM(data))
578 freq = 22500;
579 else
580 freq = FREQ_FROM_REG(data->freq_map, data->pwm_freq[nr]);
581
582 return sprintf(buf, "%d\n", freq);
583}
584
585static ssize_t set_pwm_freq(struct device *dev,
586 struct device_attribute *attr, const char *buf, size_t count)
587{
588 int nr = to_sensor_dev_attr(attr)->index;
589 struct i2c_client *client = to_i2c_client(dev);
590 struct lm85_data *data = i2c_get_clientdata(client);
591 long val = simple_strtol(buf, NULL, 10);
592
593 mutex_lock(&data->update_lock);
594 /* The ADT7468 has a special high-frequency PWM output mode,
595 * where all PWM outputs are driven by a 22.5 kHz clock.
596 * This might confuse the user, but there's not much we can do. */
597 if (data->type == adt7468 && val >= 11300) { /* High freq. mode */
598 data->cfg5 &= ~ADT7468_HFPWM;
599 lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
600 } else { /* Low freq. mode */
601 data->pwm_freq[nr] = FREQ_TO_REG(data->freq_map, val);
602 lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
603 (data->zone[nr].range << 4)
604 | data->pwm_freq[nr]);
605 if (data->type == adt7468) {
606 data->cfg5 |= ADT7468_HFPWM;
607 lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
608 }
609 }
610 mutex_unlock(&data->update_lock);
611 return count;
612}
613
614#define show_pwm_reg(offset) \
615static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
616 show_pwm, set_pwm, offset - 1); \
617static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
618 show_pwm_enable, set_pwm_enable, offset - 1); \
619static SENSOR_DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR, \
620 show_pwm_freq, set_pwm_freq, offset - 1)
621
622show_pwm_reg(1);
623show_pwm_reg(2);
624show_pwm_reg(3);
625
626/* Voltages */
627
628static ssize_t show_in(struct device *dev, struct device_attribute *attr,
629 char *buf)
630{
631 int nr = to_sensor_dev_attr(attr)->index;
632 struct lm85_data *data = lm85_update_device(dev);
633 return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr],
634 data->in_ext[nr]));
635}
636
637static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
638 char *buf)
639{
640 int nr = to_sensor_dev_attr(attr)->index;
641 struct lm85_data *data = lm85_update_device(dev);
642 return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr]));
643}
644
645static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
646 const char *buf, size_t count)
647{
648 int nr = to_sensor_dev_attr(attr)->index;
649 struct i2c_client *client = to_i2c_client(dev);
650 struct lm85_data *data = i2c_get_clientdata(client);
651 long val = simple_strtol(buf, NULL, 10);
652
653 mutex_lock(&data->update_lock);
654 data->in_min[nr] = INS_TO_REG(nr, val);
655 lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
656 mutex_unlock(&data->update_lock);
657 return count;
658}
659
660static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
661 char *buf)
662{
663 int nr = to_sensor_dev_attr(attr)->index;
664 struct lm85_data *data = lm85_update_device(dev);
665 return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr]));
666}
667
668static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
669 const char *buf, size_t count)
670{
671 int nr = to_sensor_dev_attr(attr)->index;
672 struct i2c_client *client = to_i2c_client(dev);
673 struct lm85_data *data = i2c_get_clientdata(client);
674 long val = simple_strtol(buf, NULL, 10);
675
676 mutex_lock(&data->update_lock);
677 data->in_max[nr] = INS_TO_REG(nr, val);
678 lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
679 mutex_unlock(&data->update_lock);
680 return count;
681}
682
683#define show_in_reg(offset) \
684static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
685 show_in, NULL, offset); \
686static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
687 show_in_min, set_in_min, offset); \
688static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
689 show_in_max, set_in_max, offset)
690
691show_in_reg(0);
692show_in_reg(1);
693show_in_reg(2);
694show_in_reg(3);
695show_in_reg(4);
696show_in_reg(5);
697show_in_reg(6);
698show_in_reg(7);
699
700/* Temps */
701
702static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
703 char *buf)
704{
705 int nr = to_sensor_dev_attr(attr)->index;
706 struct lm85_data *data = lm85_update_device(dev);
707 return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr],
708 data->temp_ext[nr]));
709}
710
711static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
712 char *buf)
713{
714 int nr = to_sensor_dev_attr(attr)->index;
715 struct lm85_data *data = lm85_update_device(dev);
716 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
717}
718
719static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
720 const char *buf, size_t count)
721{
722 int nr = to_sensor_dev_attr(attr)->index;
723 struct i2c_client *client = to_i2c_client(dev);
724 struct lm85_data *data = i2c_get_clientdata(client);
725 long val = simple_strtol(buf, NULL, 10);
726
727 if (IS_ADT7468_OFF64(data))
728 val += 64;
729
730 mutex_lock(&data->update_lock);
731 data->temp_min[nr] = TEMP_TO_REG(val);
732 lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
733 mutex_unlock(&data->update_lock);
734 return count;
735}
736
737static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
738 char *buf)
739{
740 int nr = to_sensor_dev_attr(attr)->index;
741 struct lm85_data *data = lm85_update_device(dev);
742 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
743}
744
745static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
746 const char *buf, size_t count)
747{
748 int nr = to_sensor_dev_attr(attr)->index;
749 struct i2c_client *client = to_i2c_client(dev);
750 struct lm85_data *data = i2c_get_clientdata(client);
751 long val = simple_strtol(buf, NULL, 10);
752
753 if (IS_ADT7468_OFF64(data))
754 val += 64;
755
756 mutex_lock(&data->update_lock);
757 data->temp_max[nr] = TEMP_TO_REG(val);
758 lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
759 mutex_unlock(&data->update_lock);
760 return count;
761}
762
763#define show_temp_reg(offset) \
764static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
765 show_temp, NULL, offset - 1); \
766static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
767 show_temp_min, set_temp_min, offset - 1); \
768static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
769 show_temp_max, set_temp_max, offset - 1);
770
771show_temp_reg(1);
772show_temp_reg(2);
773show_temp_reg(3);
774
775
776/* Automatic PWM control */
777
778static ssize_t show_pwm_auto_channels(struct device *dev,
779 struct device_attribute *attr, char *buf)
780{
781 int nr = to_sensor_dev_attr(attr)->index;
782 struct lm85_data *data = lm85_update_device(dev);
783 return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config));
784}
785
786static ssize_t set_pwm_auto_channels(struct device *dev,
787 struct device_attribute *attr, const char *buf, size_t count)
788{
789 int nr = to_sensor_dev_attr(attr)->index;
790 struct i2c_client *client = to_i2c_client(dev);
791 struct lm85_data *data = i2c_get_clientdata(client);
792 long val = simple_strtol(buf, NULL, 10);
793
794 mutex_lock(&data->update_lock);
795 data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
796 | ZONE_TO_REG(val);
797 lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
798 data->autofan[nr].config);
799 mutex_unlock(&data->update_lock);
800 return count;
801}
802
803static ssize_t show_pwm_auto_pwm_min(struct device *dev,
804 struct device_attribute *attr, char *buf)
805{
806 int nr = to_sensor_dev_attr(attr)->index;
807 struct lm85_data *data = lm85_update_device(dev);
808 return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
809}
810
811static ssize_t set_pwm_auto_pwm_min(struct device *dev,
812 struct device_attribute *attr, const char *buf, size_t count)
813{
814 int nr = to_sensor_dev_attr(attr)->index;
815 struct i2c_client *client = to_i2c_client(dev);
816 struct lm85_data *data = i2c_get_clientdata(client);
817 long val = simple_strtol(buf, NULL, 10);
818
819 mutex_lock(&data->update_lock);
820 data->autofan[nr].min_pwm = PWM_TO_REG(val);
821 lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
822 data->autofan[nr].min_pwm);
823 mutex_unlock(&data->update_lock);
824 return count;
825}
826
827static ssize_t show_pwm_auto_pwm_minctl(struct device *dev,
828 struct device_attribute *attr, char *buf)
829{
830 int nr = to_sensor_dev_attr(attr)->index;
831 struct lm85_data *data = lm85_update_device(dev);
832 return sprintf(buf, "%d\n", data->autofan[nr].min_off);
833}
834
835static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
836 struct device_attribute *attr, const char *buf, size_t count)
837{
838 int nr = to_sensor_dev_attr(attr)->index;
839 struct i2c_client *client = to_i2c_client(dev);
840 struct lm85_data *data = i2c_get_clientdata(client);
841 long val = simple_strtol(buf, NULL, 10);
842 u8 tmp;
843
844 mutex_lock(&data->update_lock);
845 data->autofan[nr].min_off = val;
846 tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
847 tmp &= ~(0x20 << nr);
848 if (data->autofan[nr].min_off)
849 tmp |= 0x20 << nr;
850 lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp);
851 mutex_unlock(&data->update_lock);
852 return count;
853}
854
855#define pwm_auto(offset) \
856static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels, \
857 S_IRUGO | S_IWUSR, show_pwm_auto_channels, \
858 set_pwm_auto_channels, offset - 1); \
859static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_min, \
860 S_IRUGO | S_IWUSR, show_pwm_auto_pwm_min, \
861 set_pwm_auto_pwm_min, offset - 1); \
862static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, \
863 S_IRUGO | S_IWUSR, show_pwm_auto_pwm_minctl, \
864 set_pwm_auto_pwm_minctl, offset - 1)
865
866pwm_auto(1);
867pwm_auto(2);
868pwm_auto(3);
869
870/* Temperature settings for automatic PWM control */
871
872static ssize_t show_temp_auto_temp_off(struct device *dev,
873 struct device_attribute *attr, char *buf)
874{
875 int nr = to_sensor_dev_attr(attr)->index;
876 struct lm85_data *data = lm85_update_device(dev);
877 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
878 HYST_FROM_REG(data->zone[nr].hyst));
879}
880
881static ssize_t set_temp_auto_temp_off(struct device *dev,
882 struct device_attribute *attr, const char *buf, size_t count)
883{
884 int nr = to_sensor_dev_attr(attr)->index;
885 struct i2c_client *client = to_i2c_client(dev);
886 struct lm85_data *data = i2c_get_clientdata(client);
887 int min;
888 long val = simple_strtol(buf, NULL, 10);
889
890 mutex_lock(&data->update_lock);
891 min = TEMP_FROM_REG(data->zone[nr].limit);
892 data->zone[nr].hyst = HYST_TO_REG(min - val);
893 if (nr == 0 || nr == 1) {
894 lm85_write_value(client, LM85_REG_AFAN_HYST1,
895 (data->zone[0].hyst << 4)
896 | data->zone[1].hyst);
897 } else {
898 lm85_write_value(client, LM85_REG_AFAN_HYST2,
899 (data->zone[2].hyst << 4));
900 }
901 mutex_unlock(&data->update_lock);
902 return count;
903}
904
905static ssize_t show_temp_auto_temp_min(struct device *dev,
906 struct device_attribute *attr, char *buf)
907{
908 int nr = to_sensor_dev_attr(attr)->index;
909 struct lm85_data *data = lm85_update_device(dev);
910 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit));
911}
912
913static ssize_t set_temp_auto_temp_min(struct device *dev,
914 struct device_attribute *attr, const char *buf, size_t count)
915{
916 int nr = to_sensor_dev_attr(attr)->index;
917 struct i2c_client *client = to_i2c_client(dev);
918 struct lm85_data *data = i2c_get_clientdata(client);
919 long val = simple_strtol(buf, NULL, 10);
920
921 mutex_lock(&data->update_lock);
922 data->zone[nr].limit = TEMP_TO_REG(val);
923 lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
924 data->zone[nr].limit);
925
926/* Update temp_auto_max and temp_auto_range */
927 data->zone[nr].range = RANGE_TO_REG(
928 TEMP_FROM_REG(data->zone[nr].max_desired) -
929 TEMP_FROM_REG(data->zone[nr].limit));
930 lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
931 ((data->zone[nr].range & 0x0f) << 4)
932 | (data->pwm_freq[nr] & 0x07));
933
934 mutex_unlock(&data->update_lock);
935 return count;
936}
937
938static ssize_t show_temp_auto_temp_max(struct device *dev,
939 struct device_attribute *attr, char *buf)
940{
941 int nr = to_sensor_dev_attr(attr)->index;
942 struct lm85_data *data = lm85_update_device(dev);
943 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
944 RANGE_FROM_REG(data->zone[nr].range));
945}
946
947static ssize_t set_temp_auto_temp_max(struct device *dev,
948 struct device_attribute *attr, const char *buf, size_t count)
949{
950 int nr = to_sensor_dev_attr(attr)->index;
951 struct i2c_client *client = to_i2c_client(dev);
952 struct lm85_data *data = i2c_get_clientdata(client);
953 int min;
954 long val = simple_strtol(buf, NULL, 10);
955
956 mutex_lock(&data->update_lock);
957 min = TEMP_FROM_REG(data->zone[nr].limit);
958 data->zone[nr].max_desired = TEMP_TO_REG(val);
959 data->zone[nr].range = RANGE_TO_REG(
960 val - min);
961 lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
962 ((data->zone[nr].range & 0x0f) << 4)
963 | (data->pwm_freq[nr] & 0x07));
964 mutex_unlock(&data->update_lock);
965 return count;
966}
967
968static ssize_t show_temp_auto_temp_crit(struct device *dev,
969 struct device_attribute *attr, char *buf)
970{
971 int nr = to_sensor_dev_attr(attr)->index;
972 struct lm85_data *data = lm85_update_device(dev);
973 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical));
974}
975
976static ssize_t set_temp_auto_temp_crit(struct device *dev,
977 struct device_attribute *attr, const char *buf, size_t count)
978{
979 int nr = to_sensor_dev_attr(attr)->index;
980 struct i2c_client *client = to_i2c_client(dev);
981 struct lm85_data *data = i2c_get_clientdata(client);
982 long val = simple_strtol(buf, NULL, 10);
983
984 mutex_lock(&data->update_lock);
985 data->zone[nr].critical = TEMP_TO_REG(val);
986 lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
987 data->zone[nr].critical);
988 mutex_unlock(&data->update_lock);
989 return count;
990}
991
992#define temp_auto(offset) \
993static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_off, \
994 S_IRUGO | S_IWUSR, show_temp_auto_temp_off, \
995 set_temp_auto_temp_off, offset - 1); \
996static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_min, \
997 S_IRUGO | S_IWUSR, show_temp_auto_temp_min, \
998 set_temp_auto_temp_min, offset - 1); \
999static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_max, \
1000 S_IRUGO | S_IWUSR, show_temp_auto_temp_max, \
1001 set_temp_auto_temp_max, offset - 1); \
1002static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_crit, \
1003 S_IRUGO | S_IWUSR, show_temp_auto_temp_crit, \
1004 set_temp_auto_temp_crit, offset - 1);
1005
1006temp_auto(1);
1007temp_auto(2);
1008temp_auto(3);
1009
1010static struct attribute *lm85_attributes[] = {
1011 &sensor_dev_attr_fan1_input.dev_attr.attr,
1012 &sensor_dev_attr_fan2_input.dev_attr.attr,
1013 &sensor_dev_attr_fan3_input.dev_attr.attr,
1014 &sensor_dev_attr_fan4_input.dev_attr.attr,
1015 &sensor_dev_attr_fan1_min.dev_attr.attr,
1016 &sensor_dev_attr_fan2_min.dev_attr.attr,
1017 &sensor_dev_attr_fan3_min.dev_attr.attr,
1018 &sensor_dev_attr_fan4_min.dev_attr.attr,
1019 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1020 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1021 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1022 &sensor_dev_attr_fan4_alarm.dev_attr.attr,
1023
1024 &sensor_dev_attr_pwm1.dev_attr.attr,
1025 &sensor_dev_attr_pwm2.dev_attr.attr,
1026 &sensor_dev_attr_pwm3.dev_attr.attr,
1027 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1028 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1029 &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1030 &sensor_dev_attr_pwm1_freq.dev_attr.attr,
1031 &sensor_dev_attr_pwm2_freq.dev_attr.attr,
1032 &sensor_dev_attr_pwm3_freq.dev_attr.attr,
1033
1034 &sensor_dev_attr_in0_input.dev_attr.attr,
1035 &sensor_dev_attr_in1_input.dev_attr.attr,
1036 &sensor_dev_attr_in2_input.dev_attr.attr,
1037 &sensor_dev_attr_in3_input.dev_attr.attr,
1038 &sensor_dev_attr_in0_min.dev_attr.attr,
1039 &sensor_dev_attr_in1_min.dev_attr.attr,
1040 &sensor_dev_attr_in2_min.dev_attr.attr,
1041 &sensor_dev_attr_in3_min.dev_attr.attr,
1042 &sensor_dev_attr_in0_max.dev_attr.attr,
1043 &sensor_dev_attr_in1_max.dev_attr.attr,
1044 &sensor_dev_attr_in2_max.dev_attr.attr,
1045 &sensor_dev_attr_in3_max.dev_attr.attr,
1046 &sensor_dev_attr_in0_alarm.dev_attr.attr,
1047 &sensor_dev_attr_in1_alarm.dev_attr.attr,
1048 &sensor_dev_attr_in2_alarm.dev_attr.attr,
1049 &sensor_dev_attr_in3_alarm.dev_attr.attr,
1050
1051 &sensor_dev_attr_temp1_input.dev_attr.attr,
1052 &sensor_dev_attr_temp2_input.dev_attr.attr,
1053 &sensor_dev_attr_temp3_input.dev_attr.attr,
1054 &sensor_dev_attr_temp1_min.dev_attr.attr,
1055 &sensor_dev_attr_temp2_min.dev_attr.attr,
1056 &sensor_dev_attr_temp3_min.dev_attr.attr,
1057 &sensor_dev_attr_temp1_max.dev_attr.attr,
1058 &sensor_dev_attr_temp2_max.dev_attr.attr,
1059 &sensor_dev_attr_temp3_max.dev_attr.attr,
1060 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
1061 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
1062 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1063 &sensor_dev_attr_temp1_fault.dev_attr.attr,
1064 &sensor_dev_attr_temp3_fault.dev_attr.attr,
1065
1066 &sensor_dev_attr_pwm1_auto_channels.dev_attr.attr,
1067 &sensor_dev_attr_pwm2_auto_channels.dev_attr.attr,
1068 &sensor_dev_attr_pwm3_auto_channels.dev_attr.attr,
1069 &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
1070 &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
1071 &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
1072
1073 &sensor_dev_attr_temp1_auto_temp_min.dev_attr.attr,
1074 &sensor_dev_attr_temp2_auto_temp_min.dev_attr.attr,
1075 &sensor_dev_attr_temp3_auto_temp_min.dev_attr.attr,
1076 &sensor_dev_attr_temp1_auto_temp_max.dev_attr.attr,
1077 &sensor_dev_attr_temp2_auto_temp_max.dev_attr.attr,
1078 &sensor_dev_attr_temp3_auto_temp_max.dev_attr.attr,
1079 &sensor_dev_attr_temp1_auto_temp_crit.dev_attr.attr,
1080 &sensor_dev_attr_temp2_auto_temp_crit.dev_attr.attr,
1081 &sensor_dev_attr_temp3_auto_temp_crit.dev_attr.attr,
1082
1083 &dev_attr_vrm.attr,
1084 &dev_attr_cpu0_vid.attr,
1085 &dev_attr_alarms.attr,
1086 NULL
1087};
1088
1089static const struct attribute_group lm85_group = {
1090 .attrs = lm85_attributes,
1091};
1092
1093static struct attribute *lm85_attributes_minctl[] = {
1094 &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
1095 &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
1096 &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
1097 NULL
1098};
1099
1100static const struct attribute_group lm85_group_minctl = {
1101 .attrs = lm85_attributes_minctl,
1102};
1103
1104static struct attribute *lm85_attributes_temp_off[] = {
1105 &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
1106 &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
1107 &sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
1108 NULL
1109};
1110
1111static const struct attribute_group lm85_group_temp_off = {
1112 .attrs = lm85_attributes_temp_off,
1113};
1114
1115static struct attribute *lm85_attributes_in4[] = {
1116 &sensor_dev_attr_in4_input.dev_attr.attr,
1117 &sensor_dev_attr_in4_min.dev_attr.attr,
1118 &sensor_dev_attr_in4_max.dev_attr.attr,
1119 &sensor_dev_attr_in4_alarm.dev_attr.attr,
1120 NULL
1121};
1122
1123static const struct attribute_group lm85_group_in4 = {
1124 .attrs = lm85_attributes_in4,
1125};
1126
1127static struct attribute *lm85_attributes_in567[] = {
1128 &sensor_dev_attr_in5_input.dev_attr.attr,
1129 &sensor_dev_attr_in6_input.dev_attr.attr,
1130 &sensor_dev_attr_in7_input.dev_attr.attr,
1131 &sensor_dev_attr_in5_min.dev_attr.attr,
1132 &sensor_dev_attr_in6_min.dev_attr.attr,
1133 &sensor_dev_attr_in7_min.dev_attr.attr,
1134 &sensor_dev_attr_in5_max.dev_attr.attr,
1135 &sensor_dev_attr_in6_max.dev_attr.attr,
1136 &sensor_dev_attr_in7_max.dev_attr.attr,
1137 &sensor_dev_attr_in5_alarm.dev_attr.attr,
1138 &sensor_dev_attr_in6_alarm.dev_attr.attr,
1139 &sensor_dev_attr_in7_alarm.dev_attr.attr,
1140 NULL
1141};
1142
1143static const struct attribute_group lm85_group_in567 = {
1144 .attrs = lm85_attributes_in567,
1145};
1146
1147static void lm85_init_client(struct i2c_client *client)
1148{
1149 int value;
1150
1151 /* Start monitoring if needed */
1152 value = lm85_read_value(client, LM85_REG_CONFIG);
1153 if (!(value & 0x01)) {
1154 dev_info(&client->dev, "Starting monitoring\n");
1155 lm85_write_value(client, LM85_REG_CONFIG, value | 0x01);
1156 }
1157
1158 /* Warn about unusual configuration bits */
1159 if (value & 0x02)
1160 dev_warn(&client->dev, "Device configuration is locked\n");
1161 if (!(value & 0x04))
1162 dev_warn(&client->dev, "Device is not ready\n");
1163}
1164
1165static int lm85_is_fake(struct i2c_client *client)
1166{
1167 /*
1168 * Differenciate between real LM96000 and Winbond WPCD377I. The latter
1169 * emulate the former except that it has no hardware monitoring function
1170 * so the readings are always 0.
1171 */
1172 int i;
1173 u8 in_temp, fan;
1174
1175 for (i = 0; i < 8; i++) {
1176 in_temp = i2c_smbus_read_byte_data(client, 0x20 + i);
1177 fan = i2c_smbus_read_byte_data(client, 0x28 + i);
1178 if (in_temp != 0x00 || fan != 0xff)
1179 return 0;
1180 }
1181
1182 return 1;
1183}
1184
1185/* Return 0 if detection is successful, -ENODEV otherwise */
1186static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
1187{
1188 struct i2c_adapter *adapter = client->adapter;
1189 int address = client->addr;
1190 const char *type_name;
1191 int company, verstep;
1192
1193 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1194 /* We need to be able to do byte I/O */
1195 return -ENODEV;
1196 }
1197
1198 /* Determine the chip type */
1199 company = lm85_read_value(client, LM85_REG_COMPANY);
1200 verstep = lm85_read_value(client, LM85_REG_VERSTEP);
1201
1202 dev_dbg(&adapter->dev, "Detecting device at 0x%02x with "
1203 "COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
1204 address, company, verstep);
1205
1206 /* All supported chips have the version in common */
1207 if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
1208 (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
1209 dev_dbg(&adapter->dev,
1210 "Autodetection failed: unsupported version\n");
1211 return -ENODEV;
1212 }
1213 type_name = "lm85";
1214
1215 /* Now, refine the detection */
1216 if (company == LM85_COMPANY_NATIONAL) {
1217 switch (verstep) {
1218 case LM85_VERSTEP_LM85C:
1219 type_name = "lm85c";
1220 break;
1221 case LM85_VERSTEP_LM85B:
1222 type_name = "lm85b";
1223 break;
1224 case LM85_VERSTEP_LM96000_1:
1225 case LM85_VERSTEP_LM96000_2:
1226 /* Check for Winbond WPCD377I */
1227 if (lm85_is_fake(client)) {
1228 dev_dbg(&adapter->dev,
1229 "Found Winbond WPCD377I, ignoring\n");
1230 return -ENODEV;
1231 }
1232 break;
1233 }
1234 } else if (company == LM85_COMPANY_ANALOG_DEV) {
1235 switch (verstep) {
1236 case LM85_VERSTEP_ADM1027:
1237 type_name = "adm1027";
1238 break;
1239 case LM85_VERSTEP_ADT7463:
1240 case LM85_VERSTEP_ADT7463C:
1241 type_name = "adt7463";
1242 break;
1243 case LM85_VERSTEP_ADT7468_1:
1244 case LM85_VERSTEP_ADT7468_2:
1245 type_name = "adt7468";
1246 break;
1247 }
1248 } else if (company == LM85_COMPANY_SMSC) {
1249 switch (verstep) {
1250 case LM85_VERSTEP_EMC6D100_A0:
1251 case LM85_VERSTEP_EMC6D100_A1:
1252 /* Note: we can't tell a '100 from a '101 */
1253 type_name = "emc6d100";
1254 break;
1255 case LM85_VERSTEP_EMC6D102:
1256 type_name = "emc6d102";
1257 break;
1258 case LM85_VERSTEP_EMC6D103_A0:
1259 case LM85_VERSTEP_EMC6D103_A1:
1260 type_name = "emc6d103";
1261 break;
1262 case LM85_VERSTEP_EMC6D103S:
1263 type_name = "emc6d103s";
1264 break;
1265 }
1266 } else {
1267 dev_dbg(&adapter->dev,
1268 "Autodetection failed: unknown vendor\n");
1269 return -ENODEV;
1270 }
1271
1272 strlcpy(info->type, type_name, I2C_NAME_SIZE);
1273
1274 return 0;
1275}
1276
1277static void lm85_remove_files(struct i2c_client *client, struct lm85_data *data)
1278{
1279 sysfs_remove_group(&client->dev.kobj, &lm85_group);
1280 if (data->type != emc6d103s) {
1281 sysfs_remove_group(&client->dev.kobj, &lm85_group_minctl);
1282 sysfs_remove_group(&client->dev.kobj, &lm85_group_temp_off);
1283 }
1284 if (!data->has_vid5)
1285 sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
1286 if (data->type == emc6d100)
1287 sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
1288}
1289
1290static int lm85_probe(struct i2c_client *client,
1291 const struct i2c_device_id *id)
1292{
1293 struct lm85_data *data;
1294 int err;
1295
1296 data = kzalloc(sizeof(struct lm85_data), GFP_KERNEL);
1297 if (!data)
1298 return -ENOMEM;
1299
1300 i2c_set_clientdata(client, data);
1301 data->type = id->driver_data;
1302 mutex_init(&data->update_lock);
1303
1304 /* Fill in the chip specific driver values */
1305 switch (data->type) {
1306 case adm1027:
1307 case adt7463:
1308 case adt7468:
1309 case emc6d100:
1310 case emc6d102:
1311 case emc6d103:
1312 case emc6d103s:
1313 data->freq_map = adm1027_freq_map;
1314 break;
1315 default:
1316 data->freq_map = lm85_freq_map;
1317 }
1318
1319 /* Set the VRM version */
1320 data->vrm = vid_which_vrm();
1321
1322 /* Initialize the LM85 chip */
1323 lm85_init_client(client);
1324
1325 /* Register sysfs hooks */
1326 err = sysfs_create_group(&client->dev.kobj, &lm85_group);
1327 if (err)
1328 goto err_kfree;
1329
1330 /* minctl and temp_off exist on all chips except emc6d103s */
1331 if (data->type != emc6d103s) {
1332 err = sysfs_create_group(&client->dev.kobj, &lm85_group_minctl);
1333 if (err)
1334 goto err_remove_files;
1335 err = sysfs_create_group(&client->dev.kobj,
1336 &lm85_group_temp_off);
1337 if (err)
1338 goto err_remove_files;
1339 }
1340
1341 /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
1342 as a sixth digital VID input rather than an analog input. */
1343 if (data->type == adt7463 || data->type == adt7468) {
1344 u8 vid = lm85_read_value(client, LM85_REG_VID);
1345 if (vid & 0x80)
1346 data->has_vid5 = true;
1347 }
1348
1349 if (!data->has_vid5)
1350 if ((err = sysfs_create_group(&client->dev.kobj,
1351 &lm85_group_in4)))
1352 goto err_remove_files;
1353
1354 /* The EMC6D100 has 3 additional voltage inputs */
1355 if (data->type == emc6d100)
1356 if ((err = sysfs_create_group(&client->dev.kobj,
1357 &lm85_group_in567)))
1358 goto err_remove_files;
1359
1360 data->hwmon_dev = hwmon_device_register(&client->dev);
1361 if (IS_ERR(data->hwmon_dev)) {
1362 err = PTR_ERR(data->hwmon_dev);
1363 goto err_remove_files;
1364 }
1365
1366 return 0;
1367
1368 /* Error out and cleanup code */
1369 err_remove_files:
1370 lm85_remove_files(client, data);
1371 err_kfree:
1372 kfree(data);
1373 return err;
1374}
1375
1376static int lm85_remove(struct i2c_client *client)
1377{
1378 struct lm85_data *data = i2c_get_clientdata(client);
1379 hwmon_device_unregister(data->hwmon_dev);
1380 lm85_remove_files(client, data);
1381 kfree(data);
1382 return 0;
1383}
1384
1385
1386static int lm85_read_value(struct i2c_client *client, u8 reg)
1387{
1388 int res;
1389
1390 /* What size location is it? */
1391 switch (reg) {
1392 case LM85_REG_FAN(0): /* Read WORD data */
1393 case LM85_REG_FAN(1):
1394 case LM85_REG_FAN(2):
1395 case LM85_REG_FAN(3):
1396 case LM85_REG_FAN_MIN(0):
1397 case LM85_REG_FAN_MIN(1):
1398 case LM85_REG_FAN_MIN(2):
1399 case LM85_REG_FAN_MIN(3):
1400 case LM85_REG_ALARM1: /* Read both bytes at once */
1401 res = i2c_smbus_read_byte_data(client, reg) & 0xff;
1402 res |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
1403 break;
1404 default: /* Read BYTE data */
1405 res = i2c_smbus_read_byte_data(client, reg);
1406 break;
1407 }
1408
1409 return res;
1410}
1411
1412static void lm85_write_value(struct i2c_client *client, u8 reg, int value)
1413{
1414 switch (reg) {
1415 case LM85_REG_FAN(0): /* Write WORD data */
1416 case LM85_REG_FAN(1):
1417 case LM85_REG_FAN(2):
1418 case LM85_REG_FAN(3):
1419 case LM85_REG_FAN_MIN(0):
1420 case LM85_REG_FAN_MIN(1):
1421 case LM85_REG_FAN_MIN(2):
1422 case LM85_REG_FAN_MIN(3):
1423 /* NOTE: ALARM is read only, so not included here */
1424 i2c_smbus_write_byte_data(client, reg, value & 0xff);
1425 i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
1426 break;
1427 default: /* Write BYTE data */
1428 i2c_smbus_write_byte_data(client, reg, value);
1429 break;
1430 }
1431}
1432
1433static struct lm85_data *lm85_update_device(struct device *dev)
1434{
1435 struct i2c_client *client = to_i2c_client(dev);
1436 struct lm85_data *data = i2c_get_clientdata(client);
1437 int i;
1438
1439 mutex_lock(&data->update_lock);
1440
1441 if (!data->valid ||
1442 time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) {
1443 /* Things that change quickly */
1444 dev_dbg(&client->dev, "Reading sensor values\n");
1445
1446 /* Have to read extended bits first to "freeze" the
1447 * more significant bits that are read later.
1448 * There are 2 additional resolution bits per channel and we
1449 * have room for 4, so we shift them to the left.
1450 */
1451 if (data->type == adm1027 || data->type == adt7463 ||
1452 data->type == adt7468) {
1453 int ext1 = lm85_read_value(client,
1454 ADM1027_REG_EXTEND_ADC1);
1455 int ext2 = lm85_read_value(client,
1456 ADM1027_REG_EXTEND_ADC2);
1457 int val = (ext1 << 8) + ext2;
1458
1459 for (i = 0; i <= 4; i++)
1460 data->in_ext[i] =
1461 ((val >> (i * 2)) & 0x03) << 2;
1462
1463 for (i = 0; i <= 2; i++)
1464 data->temp_ext[i] =
1465 (val >> ((i + 4) * 2)) & 0x0c;
1466 }
1467
1468 data->vid = lm85_read_value(client, LM85_REG_VID);
1469
1470 for (i = 0; i <= 3; ++i) {
1471 data->in[i] =
1472 lm85_read_value(client, LM85_REG_IN(i));
1473 data->fan[i] =
1474 lm85_read_value(client, LM85_REG_FAN(i));
1475 }
1476
1477 if (!data->has_vid5)
1478 data->in[4] = lm85_read_value(client, LM85_REG_IN(4));
1479
1480 if (data->type == adt7468)
1481 data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
1482
1483 for (i = 0; i <= 2; ++i) {
1484 data->temp[i] =
1485 lm85_read_value(client, LM85_REG_TEMP(i));
1486 data->pwm[i] =
1487 lm85_read_value(client, LM85_REG_PWM(i));
1488
1489 if (IS_ADT7468_OFF64(data))
1490 data->temp[i] -= 64;
1491 }
1492
1493 data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
1494
1495 if (data->type == emc6d100) {
1496 /* Three more voltage sensors */
1497 for (i = 5; i <= 7; ++i) {
1498 data->in[i] = lm85_read_value(client,
1499 EMC6D100_REG_IN(i));
1500 }
1501 /* More alarm bits */
1502 data->alarms |= lm85_read_value(client,
1503 EMC6D100_REG_ALARM3) << 16;
1504 } else if (data->type == emc6d102 || data->type == emc6d103 ||
1505 data->type == emc6d103s) {
1506 /* Have to read LSB bits after the MSB ones because
1507 the reading of the MSB bits has frozen the
1508 LSBs (backward from the ADM1027).
1509 */
1510 int ext1 = lm85_read_value(client,
1511 EMC6D102_REG_EXTEND_ADC1);
1512 int ext2 = lm85_read_value(client,
1513 EMC6D102_REG_EXTEND_ADC2);
1514 int ext3 = lm85_read_value(client,
1515 EMC6D102_REG_EXTEND_ADC3);
1516 int ext4 = lm85_read_value(client,
1517 EMC6D102_REG_EXTEND_ADC4);
1518 data->in_ext[0] = ext3 & 0x0f;
1519 data->in_ext[1] = ext4 & 0x0f;
1520 data->in_ext[2] = ext4 >> 4;
1521 data->in_ext[3] = ext3 >> 4;
1522 data->in_ext[4] = ext2 >> 4;
1523
1524 data->temp_ext[0] = ext1 & 0x0f;
1525 data->temp_ext[1] = ext2 & 0x0f;
1526 data->temp_ext[2] = ext1 >> 4;
1527 }
1528
1529 data->last_reading = jiffies;
1530 } /* last_reading */
1531
1532 if (!data->valid ||
1533 time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) {
1534 /* Things that don't change often */
1535 dev_dbg(&client->dev, "Reading config values\n");
1536
1537 for (i = 0; i <= 3; ++i) {
1538 data->in_min[i] =
1539 lm85_read_value(client, LM85_REG_IN_MIN(i));
1540 data->in_max[i] =
1541 lm85_read_value(client, LM85_REG_IN_MAX(i));
1542 data->fan_min[i] =
1543 lm85_read_value(client, LM85_REG_FAN_MIN(i));
1544 }
1545
1546 if (!data->has_vid5) {
1547 data->in_min[4] = lm85_read_value(client,
1548 LM85_REG_IN_MIN(4));
1549 data->in_max[4] = lm85_read_value(client,
1550 LM85_REG_IN_MAX(4));
1551 }
1552
1553 if (data->type == emc6d100) {
1554 for (i = 5; i <= 7; ++i) {
1555 data->in_min[i] = lm85_read_value(client,
1556 EMC6D100_REG_IN_MIN(i));
1557 data->in_max[i] = lm85_read_value(client,
1558 EMC6D100_REG_IN_MAX(i));
1559 }
1560 }
1561
1562 for (i = 0; i <= 2; ++i) {
1563 int val;
1564
1565 data->temp_min[i] =
1566 lm85_read_value(client, LM85_REG_TEMP_MIN(i));
1567 data->temp_max[i] =
1568 lm85_read_value(client, LM85_REG_TEMP_MAX(i));
1569
1570 data->autofan[i].config =
1571 lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
1572 val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
1573 data->pwm_freq[i] = val & 0x07;
1574 data->zone[i].range = val >> 4;
1575 data->autofan[i].min_pwm =
1576 lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
1577 data->zone[i].limit =
1578 lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
1579 data->zone[i].critical =
1580 lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
1581
1582 if (IS_ADT7468_OFF64(data)) {
1583 data->temp_min[i] -= 64;
1584 data->temp_max[i] -= 64;
1585 data->zone[i].limit -= 64;
1586 data->zone[i].critical -= 64;
1587 }
1588 }
1589
1590 if (data->type != emc6d103s) {
1591 i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
1592 data->autofan[0].min_off = (i & 0x20) != 0;
1593 data->autofan[1].min_off = (i & 0x40) != 0;
1594 data->autofan[2].min_off = (i & 0x80) != 0;
1595
1596 i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
1597 data->zone[0].hyst = i >> 4;
1598 data->zone[1].hyst = i & 0x0f;
1599
1600 i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
1601 data->zone[2].hyst = i >> 4;
1602 }
1603
1604 data->last_config = jiffies;
1605 } /* last_config */
1606
1607 data->valid = 1;
1608
1609 mutex_unlock(&data->update_lock);
1610
1611 return data;
1612}
1613
1614
1615static int __init sm_lm85_init(void)
1616{
1617 return i2c_add_driver(&lm85_driver);
1618}
1619
1620static void __exit sm_lm85_exit(void)
1621{
1622 i2c_del_driver(&lm85_driver);
1623}
1624
1625MODULE_LICENSE("GPL");
1626MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
1627 "Margit Schubert-While <margitsw@t-online.de>, "
1628 "Justin Thiessen <jthiessen@penguincomputing.com>");
1629MODULE_DESCRIPTION("LM85-B, LM85-C driver");
1630
1631module_init(sm_lm85_init);
1632module_exit(sm_lm85_exit);