Linux Audio

Check our new training course

Loading...
v4.6
  1/*
  2 * Copyright © 2006 Intel Corporation
  3 *
  4 * Permission is hereby granted, free of charge, to any person obtaining a
  5 * copy of this software and associated documentation files (the "Software"),
  6 * to deal in the Software without restriction, including without limitation
  7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  8 * and/or sell copies of the Software, and to permit persons to whom the
  9 * Software is furnished to do so, subject to the following conditions:
 10 *
 11 * The above copyright notice and this permission notice (including the next
 12 * paragraph) shall be included in all copies or substantial portions of the
 13 * Software.
 14 *
 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 20 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 21 * SOFTWARE.
 22 *
 23 * Authors:
 24 *    Eric Anholt <eric@anholt.net>
 25 *
 26 */
 27
 28#ifndef _INTEL_BIOS_H_
 29#define _INTEL_BIOS_H_
 
 
 30
 31/**
 32 * struct vbt_header - VBT Header structure
 33 * @signature:		VBT signature, always starts with "$VBT"
 34 * @version:		Version of this structure
 35 * @header_size:	Size of this structure
 36 * @vbt_size:		Size of VBT (VBT Header, BDB Header and data blocks)
 37 * @vbt_checksum:	Checksum
 38 * @reserved0:		Reserved
 39 * @bdb_offset:		Offset of &struct bdb_header from beginning of VBT
 40 * @aim_offset:		Offsets of add-in data blocks from beginning of VBT
 41 */
 42struct vbt_header {
 43	u8 signature[20];
 44	u16 version;
 45	u16 header_size;
 46	u16 vbt_size;
 47	u8 vbt_checksum;
 48	u8 reserved0;
 49	u32 bdb_offset;
 50	u32 aim_offset[4];
 51} __packed;
 52
 53/**
 54 * struct bdb_header - BDB Header structure
 55 * @signature:		BDB signature "BIOS_DATA_BLOCK"
 56 * @version:		Version of the data block definitions
 57 * @header_size:	Size of this structure
 58 * @bdb_size:		Size of BDB (BDB Header and data blocks)
 59 */
 60struct bdb_header {
 61	u8 signature[16];
 62	u16 version;
 63	u16 header_size;
 64	u16 bdb_size;
 65} __packed;
 66
 67/* strictly speaking, this is a "skip" block, but it has interesting info */
 68struct vbios_data {
 69	u8 type; /* 0 == desktop, 1 == mobile */
 70	u8 relstage;
 71	u8 chipset;
 72	u8 lvds_present:1;
 73	u8 tv_present:1;
 74	u8 rsvd2:6; /* finish byte */
 75	u8 rsvd3[4];
 76	u8 signon[155];
 77	u8 copyright[61];
 78	u16 code_segment;
 79	u8 dos_boot_mode;
 80	u8 bandwidth_percent;
 81	u8 rsvd4; /* popup memory size */
 82	u8 resize_pci_bios;
 83	u8 rsvd5; /* is crt already on ddc2 */
 84} __packed;
 85
 86/*
 87 * There are several types of BIOS data blocks (BDBs), each block has
 88 * an ID and size in the first 3 bytes (ID in first, size in next 2).
 89 * Known types are listed below.
 90 */
 91#define BDB_GENERAL_FEATURES	  1
 92#define BDB_GENERAL_DEFINITIONS	  2
 93#define BDB_OLD_TOGGLE_LIST	  3
 94#define BDB_MODE_SUPPORT_LIST	  4
 95#define BDB_GENERIC_MODE_TABLE	  5
 96#define BDB_EXT_MMIO_REGS	  6
 97#define BDB_SWF_IO		  7
 98#define BDB_SWF_MMIO		  8
 99#define BDB_PSR			  9
100#define BDB_MODE_REMOVAL_TABLE	 10
101#define BDB_CHILD_DEVICE_TABLE	 11
102#define BDB_DRIVER_FEATURES	 12
103#define BDB_DRIVER_PERSISTENCE	 13
104#define BDB_EXT_TABLE_PTRS	 14
105#define BDB_DOT_CLOCK_OVERRIDE	 15
106#define BDB_DISPLAY_SELECT	 16
107/* 17 rsvd */
108#define BDB_DRIVER_ROTATION	 18
109#define BDB_DISPLAY_REMOVE	 19
110#define BDB_OEM_CUSTOM		 20
111#define BDB_EFP_LIST		 21 /* workarounds for VGA hsync/vsync */
112#define BDB_SDVO_LVDS_OPTIONS	 22
113#define BDB_SDVO_PANEL_DTDS	 23
114#define BDB_SDVO_LVDS_PNP_IDS	 24
115#define BDB_SDVO_LVDS_POWER_SEQ	 25
116#define BDB_TV_OPTIONS		 26
117#define BDB_EDP			 27
118#define BDB_LVDS_OPTIONS	 40
119#define BDB_LVDS_LFP_DATA_PTRS	 41
120#define BDB_LVDS_LFP_DATA	 42
121#define BDB_LVDS_BACKLIGHT	 43
122#define BDB_LVDS_POWER		 44
123#define BDB_MIPI_CONFIG		 52
124#define BDB_MIPI_SEQUENCE	 53
125#define BDB_SKIP		254 /* VBIOS private block, ignore */
126
127struct bdb_general_features {
128        /* bits 1 */
129	u8 panel_fitting:2;
130	u8 flexaim:1;
131	u8 msg_enable:1;
132	u8 clear_screen:3;
133	u8 color_flip:1;
134
135        /* bits 2 */
136	u8 download_ext_vbt:1;
137	u8 enable_ssc:1;
138	u8 ssc_freq:1;
139	u8 enable_lfp_on_override:1;
140	u8 disable_ssc_ddt:1;
141	u8 rsvd7:1;
142	u8 display_clock_mode:1;
143	u8 rsvd8:1; /* finish byte */
144
145        /* bits 3 */
146	u8 disable_smooth_vision:1;
147	u8 single_dvi:1;
148	u8 rsvd9:1;
149	u8 fdi_rx_polarity_inverted:1;
150	u8 rsvd10:4; /* finish byte */
151
152        /* bits 4 */
153	u8 legacy_monitor_detect;
154
155        /* bits 5 */
156	u8 int_crt_support:1;
157	u8 int_tv_support:1;
158	u8 int_efp_support:1;
159	u8 dp_ssc_enb:1;	/* PCH attached eDP supports SSC */
160	u8 dp_ssc_freq:1;	/* SSC freq for PCH attached eDP */
161	u8 rsvd11:3; /* finish byte */
162} __packed;
163
164/* pre-915 */
165#define GPIO_PIN_DVI_LVDS	0x03 /* "DVI/LVDS DDC GPIO pins" */
166#define GPIO_PIN_ADD_I2C	0x05 /* "ADDCARD I2C GPIO pins" */
167#define GPIO_PIN_ADD_DDC	0x04 /* "ADDCARD DDC GPIO pins" */
168#define GPIO_PIN_ADD_DDC_I2C	0x06 /* "ADDCARD DDC/I2C GPIO pins" */
169
170/* Pre 915 */
171#define DEVICE_TYPE_NONE	0x00
172#define DEVICE_TYPE_CRT		0x01
173#define DEVICE_TYPE_TV		0x09
174#define DEVICE_TYPE_EFP		0x12
175#define DEVICE_TYPE_LFP		0x22
176/* On 915+ */
177#define DEVICE_TYPE_CRT_DPMS		0x6001
178#define DEVICE_TYPE_CRT_DPMS_HOTPLUG	0x4001
179#define DEVICE_TYPE_TV_COMPOSITE	0x0209
180#define DEVICE_TYPE_TV_MACROVISION	0x0289
181#define DEVICE_TYPE_TV_RF_COMPOSITE	0x020c
182#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE	0x0609
183#define DEVICE_TYPE_TV_SCART		0x0209
184#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
185#define DEVICE_TYPE_EFP_HOTPLUG_PWR	0x6012
186#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR	0x6052
187#define DEVICE_TYPE_EFP_DVI_I		0x6053
188#define DEVICE_TYPE_EFP_DVI_D_DUAL	0x6152
189#define DEVICE_TYPE_EFP_DVI_D_HDCP	0x60d2
190#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR	0x6062
191#define DEVICE_TYPE_OPENLDI_DUALPIX	0x6162
192#define DEVICE_TYPE_LFP_PANELLINK	0x5012
193#define DEVICE_TYPE_LFP_CMOS_PWR	0x5042
194#define DEVICE_TYPE_LFP_LVDS_PWR	0x5062
195#define DEVICE_TYPE_LFP_LVDS_DUAL	0x5162
196#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP	0x51e2
197
198#define DEVICE_CFG_NONE		0x00
199#define DEVICE_CFG_12BIT_DVOB	0x01
200#define DEVICE_CFG_12BIT_DVOC	0x02
201#define DEVICE_CFG_24BIT_DVOBC	0x09
202#define DEVICE_CFG_24BIT_DVOCB	0x0a
203#define DEVICE_CFG_DUAL_DVOB	0x11
204#define DEVICE_CFG_DUAL_DVOC	0x12
205#define DEVICE_CFG_DUAL_DVOBC	0x13
206#define DEVICE_CFG_DUAL_LINK_DVOBC	0x19
207#define DEVICE_CFG_DUAL_LINK_DVOCB	0x1a
208
209#define DEVICE_WIRE_NONE	0x00
210#define DEVICE_WIRE_DVOB	0x01
211#define DEVICE_WIRE_DVOC	0x02
212#define DEVICE_WIRE_DVOBC	0x03
213#define DEVICE_WIRE_DVOBB	0x05
214#define DEVICE_WIRE_DVOCC	0x06
215#define DEVICE_WIRE_DVOB_MASTER 0x0d
216#define DEVICE_WIRE_DVOC_MASTER 0x0e
217
218#define DEVICE_PORT_DVOA	0x00 /* none on 845+ */
219#define DEVICE_PORT_DVOB	0x01
220#define DEVICE_PORT_DVOC	0x02
221
222/*
223 * We used to keep this struct but without any version control. We should avoid
224 * using it in the future, but it should be safe to keep using it in the old
225 * code. Do not change; we rely on its size.
226 */
227struct old_child_dev_config {
228	u16 handle;
229	u16 device_type;
230	u8  device_id[10]; /* ascii string */
 
231	u16 addin_offset;
232	u8  dvo_port; /* See Device_PORT_* above */
233	u8  i2c_pin;
234	u8  slave_addr;
235	u8  ddc_pin;
236	u16 edid_ptr;
237	u8  dvo_cfg; /* See DEVICE_CFG_* above */
238	u8  dvo2_port;
239	u8  i2c2_pin;
240	u8  slave2_addr;
241	u8  ddc2_pin;
242	u8  capabilities;
243	u8  dvo_wiring;/* See DEVICE_WIRE_* above */
244	u8  dvo2_wiring;
245	u16 extended_type;
246	u8  dvo_function;
247} __packed;
248
249/* This one contains field offsets that are known to be common for all BDB
250 * versions. Notice that the meaning of the contents contents may still change,
251 * but at least the offsets are consistent. */
252
253/* Definitions for flags_1 */
254#define IBOOST_ENABLE (1<<3)
255
256struct common_child_dev_config {
257	u16 handle;
258	u16 device_type;
259	u8 not_common1[12];
260	u8 dvo_port;
261	u8 not_common2[2];
262	u8 ddc_pin;
263	u16 edid_ptr;
264	u8 obsolete;
265	u8 flags_1;
266	u8 not_common3[13];
267	u8 iboost_level;
268} __packed;
269
270
271/* This field changes depending on the BDB version, so the most reliable way to
272 * read it is by checking the BDB version and reading the raw pointer. */
273union child_device_config {
274	/* This one is safe to be used anywhere, but the code should still check
275	 * the BDB version. */
276	u8 raw[33];
277	/* This one should only be kept for legacy code. */
278	struct old_child_dev_config old;
279	/* This one should also be safe to use anywhere, even without version
280	 * checks. */
281	struct common_child_dev_config common;
282} __packed;
283
284struct bdb_general_definitions {
285	/* DDC GPIO */
286	u8 crt_ddc_gmbus_pin;
287
288	/* DPMS bits */
289	u8 dpms_acpi:1;
290	u8 skip_boot_crt_detect:1;
291	u8 dpms_aim:1;
292	u8 rsvd1:5; /* finish byte */
293
294	/* boot device bits */
295	u8 boot_display[2];
296	u8 child_dev_size;
297
298	/*
299	 * Device info:
300	 * If TV is present, it'll be at devices[0].
301	 * LVDS will be next, either devices[0] or [1], if present.
302	 * On some platforms the number of device is 6. But could be as few as
303	 * 4 if both TV and LVDS are missing.
304	 * And the device num is related with the size of general definition
305	 * block. It is obtained by using the following formula:
306	 * number = (block_size - sizeof(bdb_general_definitions))/
307	 *	     defs->child_dev_size;
308	 */
309	uint8_t devices[0];
310} __packed;
311
312/* Mask for DRRS / Panel Channel / SSC / BLT control bits extraction */
313#define MODE_MASK		0x3
314
315struct bdb_lvds_options {
316	u8 panel_type;
317	u8 rsvd1;
318	/* LVDS capabilities, stored in a dword */
319	u8 pfit_mode:2;
320	u8 pfit_text_mode_enhanced:1;
321	u8 pfit_gfx_mode_enhanced:1;
322	u8 pfit_ratio_auto:1;
323	u8 pixel_dither:1;
324	u8 lvds_edid:1;
325	u8 rsvd2:1;
326	u8 rsvd4;
327	/* LVDS Panel channel bits stored here */
328	u32 lvds_panel_channel_bits;
329	/* LVDS SSC (Spread Spectrum Clock) bits stored here. */
330	u16 ssc_bits;
331	u16 ssc_freq;
332	u16 ssc_ddt;
333	/* Panel color depth defined here */
334	u16 panel_color_depth;
335	/* LVDS panel type bits stored here */
336	u32 dps_panel_type_bits;
337	/* LVDS backlight control type bits stored here */
338	u32 blt_control_type_bits;
339} __packed;
340
341/* LFP pointer table contains entries to the struct below */
342struct bdb_lvds_lfp_data_ptr {
343	u16 fp_timing_offset; /* offsets are from start of bdb */
344	u8 fp_table_size;
345	u16 dvo_timing_offset;
346	u8 dvo_table_size;
347	u16 panel_pnp_id_offset;
348	u8 pnp_table_size;
349} __packed;
350
351struct bdb_lvds_lfp_data_ptrs {
352	u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
353	struct bdb_lvds_lfp_data_ptr ptr[16];
354} __packed;
355
356/* LFP data has 3 blocks per entry */
357struct lvds_fp_timing {
358	u16 x_res;
359	u16 y_res;
360	u32 lvds_reg;
361	u32 lvds_reg_val;
362	u32 pp_on_reg;
363	u32 pp_on_reg_val;
364	u32 pp_off_reg;
365	u32 pp_off_reg_val;
366	u32 pp_cycle_reg;
367	u32 pp_cycle_reg_val;
368	u32 pfit_reg;
369	u32 pfit_reg_val;
370	u16 terminator;
371} __packed;
372
373struct lvds_dvo_timing {
374	u16 clock;		/**< In 10khz */
375	u8 hactive_lo;
376	u8 hblank_lo;
377	u8 hblank_hi:4;
378	u8 hactive_hi:4;
379	u8 vactive_lo;
380	u8 vblank_lo;
381	u8 vblank_hi:4;
382	u8 vactive_hi:4;
383	u8 hsync_off_lo;
384	u8 hsync_pulse_width;
385	u8 vsync_pulse_width:4;
386	u8 vsync_off:4;
387	u8 rsvd0:6;
388	u8 hsync_off_hi:2;
389	u8 h_image;
390	u8 v_image;
391	u8 max_hv;
392	u8 h_border;
393	u8 v_border;
394	u8 rsvd1:3;
395	u8 digital:2;
396	u8 vsync_positive:1;
397	u8 hsync_positive:1;
398	u8 rsvd2:1;
399} __packed;
400
401struct lvds_pnp_id {
402	u16 mfg_name;
403	u16 product_code;
404	u32 serial;
405	u8 mfg_week;
406	u8 mfg_year;
407} __packed;
408
409struct bdb_lvds_lfp_data_entry {
410	struct lvds_fp_timing fp_timing;
411	struct lvds_dvo_timing dvo_timing;
412	struct lvds_pnp_id pnp_id;
413} __packed;
414
415struct bdb_lvds_lfp_data {
416	struct bdb_lvds_lfp_data_entry data[16];
417} __packed;
418
419#define BDB_BACKLIGHT_TYPE_NONE	0
420#define BDB_BACKLIGHT_TYPE_PWM	2
421
422struct bdb_lfp_backlight_data_entry {
423	u8 type:2;
424	u8 active_low_pwm:1;
425	u8 obsolete1:5;
426	u16 pwm_freq_hz;
427	u8 min_brightness;
428	u8 obsolete2;
429	u8 obsolete3;
430} __packed;
431
432struct bdb_lfp_backlight_data {
433	u8 entry_size;
434	struct bdb_lfp_backlight_data_entry data[16];
435	u8 level[16];
436} __packed;
437
438struct aimdb_header {
439	char signature[16];
440	char oem_device[20];
441	u16 aimdb_version;
442	u16 aimdb_header_size;
443	u16 aimdb_size;
444} __packed;
445
446struct aimdb_block {
447	u8 aimdb_id;
448	u16 aimdb_size;
449} __packed;
450
451struct vch_panel_data {
452	u16 fp_timing_offset;
453	u8 fp_timing_size;
454	u16 dvo_timing_offset;
455	u8 dvo_timing_size;
456	u16 text_fitting_offset;
457	u8 text_fitting_size;
458	u16 graphics_fitting_offset;
459	u8 graphics_fitting_size;
460} __packed;
461
462struct vch_bdb_22 {
463	struct aimdb_block aimdb_block;
464	struct vch_panel_data panels[16];
465} __packed;
466
467struct bdb_sdvo_lvds_options {
468	u8 panel_backlight;
469	u8 h40_set_panel_type;
470	u8 panel_type;
471	u8 ssc_clk_freq;
472	u16 als_low_trip;
473	u16 als_high_trip;
474	u8 sclalarcoeff_tab_row_num;
475	u8 sclalarcoeff_tab_row_size;
476	u8 coefficient[8];
477	u8 panel_misc_bits_1;
478	u8 panel_misc_bits_2;
479	u8 panel_misc_bits_3;
480	u8 panel_misc_bits_4;
481} __packed;
482
483
484#define BDB_DRIVER_FEATURE_NO_LVDS		0
485#define BDB_DRIVER_FEATURE_INT_LVDS		1
486#define BDB_DRIVER_FEATURE_SDVO_LVDS		2
487#define BDB_DRIVER_FEATURE_EDP			3
488
489struct bdb_driver_features {
490	u8 boot_dev_algorithm:1;
491	u8 block_display_switch:1;
492	u8 allow_display_switch:1;
493	u8 hotplug_dvo:1;
494	u8 dual_view_zoom:1;
495	u8 int15h_hook:1;
496	u8 sprite_in_clone:1;
497	u8 primary_lfp_id:1;
498
499	u16 boot_mode_x;
500	u16 boot_mode_y;
501	u8 boot_mode_bpp;
502	u8 boot_mode_refresh;
503
504	u16 enable_lfp_primary:1;
505	u16 selective_mode_pruning:1;
506	u16 dual_frequency:1;
507	u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
508	u16 nt_clone_support:1;
509	u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
510	u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
511	u16 cui_aspect_scaling:1;
512	u16 preserve_aspect_ratio:1;
513	u16 sdvo_device_power_down:1;
514	u16 crt_hotplug:1;
515	u16 lvds_config:2;
516	u16 tv_hotplug:1;
517	u16 hdmi_config:2;
518
519	u8 static_display:1;
520	u8 reserved2:7;
521	u16 legacy_crt_max_x;
522	u16 legacy_crt_max_y;
523	u8 legacy_crt_max_refresh;
524
525	u8 hdmi_termination;
526	u8 custom_vbt_version;
527	/* Driver features data block */
528	u16 rmpm_enabled:1;
529	u16 s2ddt_enabled:1;
530	u16 dpst_enabled:1;
531	u16 bltclt_enabled:1;
532	u16 adb_enabled:1;
533	u16 drrs_enabled:1;
534	u16 grs_enabled:1;
535	u16 gpmt_enabled:1;
536	u16 tbt_enabled:1;
537	u16 psr_enabled:1;
538	u16 ips_enabled:1;
539	u16 reserved3:4;
540	u16 pc_feature_valid:1;
541} __packed;
542
543#define EDP_18BPP	0
544#define EDP_24BPP	1
545#define EDP_30BPP	2
546#define EDP_RATE_1_62	0
547#define EDP_RATE_2_7	1
548#define EDP_LANE_1	0
549#define EDP_LANE_2	1
550#define EDP_LANE_4	3
551#define EDP_PREEMPHASIS_NONE	0
552#define EDP_PREEMPHASIS_3_5dB	1
553#define EDP_PREEMPHASIS_6dB	2
554#define EDP_PREEMPHASIS_9_5dB	3
555#define EDP_VSWING_0_4V		0
556#define EDP_VSWING_0_6V		1
557#define EDP_VSWING_0_8V		2
558#define EDP_VSWING_1_2V		3
559
560struct edp_power_seq {
561	u16 t1_t3;
562	u16 t8;
563	u16 t9;
564	u16 t10;
565	u16 t11_t12;
566} __packed;
567
568struct edp_link_params {
569	u8 rate:4;
570	u8 lanes:4;
571	u8 preemphasis:4;
572	u8 vswing:4;
573} __packed;
574
575struct bdb_edp {
576	struct edp_power_seq power_seqs[16];
577	u32 color_depth;
578	struct edp_link_params link_params[16];
579	u32 sdrrs_msa_timing_delay;
 
 
580
581	/* ith bit indicates enabled/disabled for (i+1)th panel */
582	u16 edp_s3d_feature;
583	u16 edp_t3_optimization;
584	u64 edp_vswing_preemph;		/* v173 */
585} __packed;
586
587struct psr_table {
588	/* Feature bits */
589	u8 full_link:1;
590	u8 require_aux_to_wakeup:1;
591	u8 feature_bits_rsvd:6;
592
593	/* Wait times */
594	u8 idle_frames:4;
595	u8 lines_to_wait:3;
596	u8 wait_times_rsvd:1;
597
598	/* TP wake up time in multiple of 100 */
599	u16 tp1_wakeup_time;
600	u16 tp2_tp3_wakeup_time;
601} __packed;
602
603struct bdb_psr {
604	struct psr_table psr_table[16];
605} __packed;
606
607/*
608 * Driver<->VBIOS interaction occurs through scratch bits in
609 * GR18 & SWF*.
610 */
611
612/* GR18 bits are set on display switch and hotkey events */
613#define GR18_DRIVER_SWITCH_EN	(1<<7) /* 0: VBIOS control, 1: driver control */
614#define GR18_HOTKEY_MASK	0x78 /* See also SWF4 15:0 */
615#define   GR18_HK_NONE		(0x0<<3)
616#define   GR18_HK_LFP_STRETCH	(0x1<<3)
617#define   GR18_HK_TOGGLE_DISP	(0x2<<3)
618#define   GR18_HK_DISP_SWITCH	(0x4<<3) /* see SWF14 15:0 for what to enable */
619#define   GR18_HK_POPUP_DISABLED (0x6<<3)
620#define   GR18_HK_POPUP_ENABLED	(0x7<<3)
621#define   GR18_HK_PFIT		(0x8<<3)
622#define   GR18_HK_APM_CHANGE	(0xa<<3)
623#define   GR18_HK_MULTIPLE	(0xc<<3)
624#define GR18_USER_INT_EN	(1<<2)
625#define GR18_A0000_FLUSH_EN	(1<<1)
626#define GR18_SMM_EN		(1<<0)
627
628/* Set by driver, cleared by VBIOS */
629#define SWF00_YRES_SHIFT	16
630#define SWF00_XRES_SHIFT	0
631#define SWF00_RES_MASK		0xffff
632
633/* Set by VBIOS at boot time and driver at runtime */
634#define SWF01_TV2_FORMAT_SHIFT	8
635#define SWF01_TV1_FORMAT_SHIFT	0
636#define SWF01_TV_FORMAT_MASK	0xffff
637
638#define SWF10_VBIOS_BLC_I2C_EN	(1<<29)
639#define SWF10_GTT_OVERRIDE_EN	(1<<28)
640#define SWF10_LFP_DPMS_OVR	(1<<27) /* override DPMS on display switch */
641#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
642#define   SWF10_OLD_TOGGLE	0x0
643#define   SWF10_TOGGLE_LIST_1	0x1
644#define   SWF10_TOGGLE_LIST_2	0x2
645#define   SWF10_TOGGLE_LIST_3	0x3
646#define   SWF10_TOGGLE_LIST_4	0x4
647#define SWF10_PANNING_EN	(1<<23)
648#define SWF10_DRIVER_LOADED	(1<<22)
649#define SWF10_EXTENDED_DESKTOP	(1<<21)
650#define SWF10_EXCLUSIVE_MODE	(1<<20)
651#define SWF10_OVERLAY_EN	(1<<19)
652#define SWF10_PLANEB_HOLDOFF	(1<<18)
653#define SWF10_PLANEA_HOLDOFF	(1<<17)
654#define SWF10_VGA_HOLDOFF	(1<<16)
655#define SWF10_ACTIVE_DISP_MASK	0xffff
656#define   SWF10_PIPEB_LFP2	(1<<15)
657#define   SWF10_PIPEB_EFP2	(1<<14)
658#define   SWF10_PIPEB_TV2	(1<<13)
659#define   SWF10_PIPEB_CRT2	(1<<12)
660#define   SWF10_PIPEB_LFP	(1<<11)
661#define   SWF10_PIPEB_EFP	(1<<10)
662#define   SWF10_PIPEB_TV	(1<<9)
663#define   SWF10_PIPEB_CRT	(1<<8)
664#define   SWF10_PIPEA_LFP2	(1<<7)
665#define   SWF10_PIPEA_EFP2	(1<<6)
666#define   SWF10_PIPEA_TV2	(1<<5)
667#define   SWF10_PIPEA_CRT2	(1<<4)
668#define   SWF10_PIPEA_LFP	(1<<3)
669#define   SWF10_PIPEA_EFP	(1<<2)
670#define   SWF10_PIPEA_TV	(1<<1)
671#define   SWF10_PIPEA_CRT	(1<<0)
672
673#define SWF11_MEMORY_SIZE_SHIFT	16
674#define SWF11_SV_TEST_EN	(1<<15)
675#define SWF11_IS_AGP		(1<<14)
676#define SWF11_DISPLAY_HOLDOFF	(1<<13)
677#define SWF11_DPMS_REDUCED	(1<<12)
678#define SWF11_IS_VBE_MODE	(1<<11)
679#define SWF11_PIPEB_ACCESS	(1<<10) /* 0 here means pipe a */
680#define SWF11_DPMS_MASK		0x07
681#define   SWF11_DPMS_OFF	(1<<2)
682#define   SWF11_DPMS_SUSPEND	(1<<1)
683#define   SWF11_DPMS_STANDBY	(1<<0)
684#define   SWF11_DPMS_ON		0
685
686#define SWF14_GFX_PFIT_EN	(1<<31)
687#define SWF14_TEXT_PFIT_EN	(1<<30)
688#define SWF14_LID_STATUS_CLOSED	(1<<29) /* 0 here means open */
689#define SWF14_POPUP_EN		(1<<28)
690#define SWF14_DISPLAY_HOLDOFF	(1<<27)
691#define SWF14_DISP_DETECT_EN	(1<<26)
692#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
693#define SWF14_DRIVER_STATUS	(1<<24)
694#define SWF14_OS_TYPE_WIN9X	(1<<23)
695#define SWF14_OS_TYPE_WINNT	(1<<22)
696/* 21:19 rsvd */
697#define SWF14_PM_TYPE_MASK	0x00070000
698#define   SWF14_PM_ACPI_VIDEO	(0x4 << 16)
699#define   SWF14_PM_ACPI		(0x3 << 16)
700#define   SWF14_PM_APM_12	(0x2 << 16)
701#define   SWF14_PM_APM_11	(0x1 << 16)
702#define SWF14_HK_REQUEST_MASK	0x0000ffff /* see GR18 6:3 for event type */
703          /* if GR18 indicates a display switch */
704#define   SWF14_DS_PIPEB_LFP2_EN (1<<15)
705#define   SWF14_DS_PIPEB_EFP2_EN (1<<14)
706#define   SWF14_DS_PIPEB_TV2_EN  (1<<13)
707#define   SWF14_DS_PIPEB_CRT2_EN (1<<12)
708#define   SWF14_DS_PIPEB_LFP_EN  (1<<11)
709#define   SWF14_DS_PIPEB_EFP_EN  (1<<10)
710#define   SWF14_DS_PIPEB_TV_EN   (1<<9)
711#define   SWF14_DS_PIPEB_CRT_EN  (1<<8)
712#define   SWF14_DS_PIPEA_LFP2_EN (1<<7)
713#define   SWF14_DS_PIPEA_EFP2_EN (1<<6)
714#define   SWF14_DS_PIPEA_TV2_EN  (1<<5)
715#define   SWF14_DS_PIPEA_CRT2_EN (1<<4)
716#define   SWF14_DS_PIPEA_LFP_EN  (1<<3)
717#define   SWF14_DS_PIPEA_EFP_EN  (1<<2)
718#define   SWF14_DS_PIPEA_TV_EN   (1<<1)
719#define   SWF14_DS_PIPEA_CRT_EN  (1<<0)
720          /* if GR18 indicates a panel fitting request */
721#define   SWF14_PFIT_EN		(1<<0) /* 0 means disable */
722          /* if GR18 indicates an APM change request */
723#define   SWF14_APM_HIBERNATE	0x4
724#define   SWF14_APM_SUSPEND	0x3
725#define   SWF14_APM_STANDBY	0x1
726#define   SWF14_APM_RESTORE	0x0
727
728/* Add the device class for LFP, TV, HDMI */
729#define	 DEVICE_TYPE_INT_LFP	0x1022
730#define	 DEVICE_TYPE_INT_TV	0x1009
731#define	 DEVICE_TYPE_HDMI	0x60D2
732#define	 DEVICE_TYPE_DP		0x68C6
733#define	 DEVICE_TYPE_eDP	0x78C6
734
735#define  DEVICE_TYPE_CLASS_EXTENSION	(1 << 15)
736#define  DEVICE_TYPE_POWER_MANAGEMENT	(1 << 14)
737#define  DEVICE_TYPE_HOTPLUG_SIGNALING	(1 << 13)
738#define  DEVICE_TYPE_INTERNAL_CONNECTOR	(1 << 12)
739#define  DEVICE_TYPE_NOT_HDMI_OUTPUT	(1 << 11)
740#define  DEVICE_TYPE_MIPI_OUTPUT	(1 << 10)
741#define  DEVICE_TYPE_COMPOSITE_OUTPUT	(1 << 9)
742#define  DEVICE_TYPE_DUAL_CHANNEL	(1 << 8)
743#define  DEVICE_TYPE_HIGH_SPEED_LINK	(1 << 6)
744#define  DEVICE_TYPE_LVDS_SINGALING	(1 << 5)
745#define  DEVICE_TYPE_TMDS_DVI_SIGNALING	(1 << 4)
746#define  DEVICE_TYPE_VIDEO_SIGNALING	(1 << 3)
747#define  DEVICE_TYPE_DISPLAYPORT_OUTPUT	(1 << 2)
748#define  DEVICE_TYPE_DIGITAL_OUTPUT	(1 << 1)
749#define  DEVICE_TYPE_ANALOG_OUTPUT	(1 << 0)
750
751/*
752 * Bits we care about when checking for DEVICE_TYPE_eDP
753 * Depending on the system, the other bits may or may not
754 * be set for eDP outputs.
755 */
756#define DEVICE_TYPE_eDP_BITS \
757	(DEVICE_TYPE_INTERNAL_CONNECTOR | \
758	 DEVICE_TYPE_MIPI_OUTPUT | \
759	 DEVICE_TYPE_COMPOSITE_OUTPUT | \
760	 DEVICE_TYPE_DUAL_CHANNEL | \
761	 DEVICE_TYPE_LVDS_SINGALING | \
762	 DEVICE_TYPE_TMDS_DVI_SIGNALING | \
763	 DEVICE_TYPE_VIDEO_SIGNALING | \
764	 DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
765	 DEVICE_TYPE_ANALOG_OUTPUT)
766
767/* define the DVO port for HDMI output type */
768#define		DVO_B		1
769#define		DVO_C		2
770#define		DVO_D		3
771
772/* Possible values for the "DVO Port" field for versions >= 155: */
773#define DVO_PORT_HDMIA	0
774#define DVO_PORT_HDMIB	1
775#define DVO_PORT_HDMIC	2
776#define DVO_PORT_HDMID	3
777#define DVO_PORT_LVDS	4
778#define DVO_PORT_TV	5
779#define DVO_PORT_CRT	6
780#define DVO_PORT_DPB	7
781#define DVO_PORT_DPC	8
782#define DVO_PORT_DPD	9
783#define DVO_PORT_DPA	10
784#define DVO_PORT_DPE	11
785#define DVO_PORT_HDMIE	12
786#define DVO_PORT_MIPIA	21
787#define DVO_PORT_MIPIB	22
788#define DVO_PORT_MIPIC	23
789#define DVO_PORT_MIPID	24
790
791/* Block 52 contains MIPI Panel info
792 * 6 such enteries will there. Index into correct
793 * entery is based on the panel_index in #40 LFP
794 */
795#define MAX_MIPI_CONFIGURATIONS	6
796
797#define MIPI_DSI_UNDEFINED_PANEL_ID	0
798#define MIPI_DSI_GENERIC_PANEL_ID	1
799
800/*
801 * PMIC vs SoC Backlight support specified in pwm_blc
802 * field in mipi_config block below.
803*/
804#define PPS_BLC_PMIC   0
805#define PPS_BLC_SOC    1
806
807struct mipi_config {
808	u16 panel_id;
809
810	/* General Params */
811	u32 enable_dithering:1;
812	u32 rsvd1:1;
813	u32 is_bridge:1;
814
815	u32 panel_arch_type:2;
816	u32 is_cmd_mode:1;
817
818#define NON_BURST_SYNC_PULSE	0x1
819#define NON_BURST_SYNC_EVENTS	0x2
820#define BURST_MODE		0x3
821	u32 video_transfer_mode:2;
822
823	u32 cabc_supported:1;
824	u32 pwm_blc:1;
825
826	/* Bit 13:10 */
827#define PIXEL_FORMAT_RGB565			0x1
828#define PIXEL_FORMAT_RGB666			0x2
829#define PIXEL_FORMAT_RGB666_LOOSELY_PACKED	0x3
830#define PIXEL_FORMAT_RGB888			0x4
831	u32 videomode_color_format:4;
832
833	/* Bit 15:14 */
834#define ENABLE_ROTATION_0	0x0
835#define ENABLE_ROTATION_90	0x1
836#define ENABLE_ROTATION_180	0x2
837#define ENABLE_ROTATION_270	0x3
838	u32 rotation:2;
839	u32 bta_enabled:1;
840	u32 rsvd2:15;
841
842	/* 2 byte Port Description */
843#define DUAL_LINK_NOT_SUPPORTED	0
844#define DUAL_LINK_FRONT_BACK	1
845#define DUAL_LINK_PIXEL_ALT	2
846	u16 dual_link:2;
847	u16 lane_cnt:2;
848	u16 pixel_overlap:3;
849	u16 rsvd3:9;
850
851	u16 rsvd4;
852
853	u8 rsvd5;
854	u32 target_burst_mode_freq;
855	u32 dsi_ddr_clk;
856	u32 bridge_ref_clk;
857
858#define  BYTE_CLK_SEL_20MHZ		0
859#define  BYTE_CLK_SEL_10MHZ		1
860#define  BYTE_CLK_SEL_5MHZ		2
861	u8 byte_clk_sel:2;
862
863	u8 rsvd6:6;
864
865	/* DPHY Flags */
866	u16 dphy_param_valid:1;
867	u16 eot_pkt_disabled:1;
868	u16 enable_clk_stop:1;
869	u16 rsvd7:13;
870
871	u32 hs_tx_timeout;
872	u32 lp_rx_timeout;
873	u32 turn_around_timeout;
874	u32 device_reset_timer;
875	u32 master_init_timer;
876	u32 dbi_bw_timer;
877	u32 lp_byte_clk_val;
878
879	/*  4 byte Dphy Params */
880	u32 prepare_cnt:6;
881	u32 rsvd8:2;
882	u32 clk_zero_cnt:8;
883	u32 trail_cnt:5;
884	u32 rsvd9:3;
885	u32 exit_zero_cnt:6;
886	u32 rsvd10:2;
887
888	u32 clk_lane_switch_cnt;
889	u32 hl_switch_cnt;
890
891	u32 rsvd11[6];
892
893	/* timings based on dphy spec */
894	u8 tclk_miss;
895	u8 tclk_post;
896	u8 rsvd12;
897	u8 tclk_pre;
898	u8 tclk_prepare;
899	u8 tclk_settle;
900	u8 tclk_term_enable;
901	u8 tclk_trail;
902	u16 tclk_prepare_clkzero;
903	u8 rsvd13;
904	u8 td_term_enable;
905	u8 teot;
906	u8 ths_exit;
907	u8 ths_prepare;
908	u16 ths_prepare_hszero;
909	u8 rsvd14;
910	u8 ths_settle;
911	u8 ths_skip;
912	u8 ths_trail;
913	u8 tinit;
914	u8 tlpx;
915	u8 rsvd15[3];
916
917	/* GPIOs */
918	u8 panel_enable;
919	u8 bl_enable;
920	u8 pwm_enable;
921	u8 reset_r_n;
922	u8 pwr_down_r;
923	u8 stdby_r_n;
924
925} __packed;
926
927/* Block 52 contains MIPI configuration block
928 * 6 * bdb_mipi_config, followed by 6 pps data
929 * block below
930 *
931 * all delays has a unit of 100us
932 */
933struct mipi_pps_data {
934	u16 panel_on_delay;
935	u16 bl_enable_delay;
936	u16 bl_disable_delay;
937	u16 panel_off_delay;
938	u16 panel_power_cycle_delay;
939} __packed;
940
941struct bdb_mipi_config {
942	struct mipi_config config[MAX_MIPI_CONFIGURATIONS];
943	struct mipi_pps_data pps[MAX_MIPI_CONFIGURATIONS];
944} __packed;
945
946/* Block 53 contains MIPI sequences as needed by the panel
947 * for enabling it. This block can be variable in size and
948 * can be maximum of 6 blocks
949 */
950struct bdb_mipi_sequence {
951	u8 version;
952	u8 data[0];
953} __packed;
954
955/* MIPI Sequnece Block definitions */
956enum mipi_seq {
957	MIPI_SEQ_END = 0,
958	MIPI_SEQ_ASSERT_RESET,
959	MIPI_SEQ_INIT_OTP,
960	MIPI_SEQ_DISPLAY_ON,
961	MIPI_SEQ_DISPLAY_OFF,
962	MIPI_SEQ_DEASSERT_RESET,
963	MIPI_SEQ_BACKLIGHT_ON,		/* sequence block v2+ */
964	MIPI_SEQ_BACKLIGHT_OFF,		/* sequence block v2+ */
965	MIPI_SEQ_TEAR_ON,		/* sequence block v2+ */
966	MIPI_SEQ_TEAR_OFF,		/* sequence block v3+ */
967	MIPI_SEQ_POWER_ON,		/* sequence block v3+ */
968	MIPI_SEQ_POWER_OFF,		/* sequence block v3+ */
969	MIPI_SEQ_MAX
970};
971
972enum mipi_seq_element {
973	MIPI_SEQ_ELEM_END = 0,
974	MIPI_SEQ_ELEM_SEND_PKT,
975	MIPI_SEQ_ELEM_DELAY,
976	MIPI_SEQ_ELEM_GPIO,
977	MIPI_SEQ_ELEM_I2C,		/* sequence block v2+ */
978	MIPI_SEQ_ELEM_SPI,		/* sequence block v3+ */
979	MIPI_SEQ_ELEM_PMIC,		/* sequence block v3+ */
980	MIPI_SEQ_ELEM_MAX
981};
982
983enum mipi_gpio_pin_index {
984	MIPI_GPIO_UNDEFINED = 0,
985	MIPI_GPIO_PANEL_ENABLE,
986	MIPI_GPIO_BL_ENABLE,
987	MIPI_GPIO_PWM_ENABLE,
988	MIPI_GPIO_RESET_N,
989	MIPI_GPIO_PWR_DOWN_R,
990	MIPI_GPIO_STDBY_RST_N,
991	MIPI_GPIO_MAX
992};
993
994#endif /* _INTEL_BIOS_H_ */
v3.1
  1/*
  2 * Copyright © 2006 Intel Corporation
  3 *
  4 * Permission is hereby granted, free of charge, to any person obtaining a
  5 * copy of this software and associated documentation files (the "Software"),
  6 * to deal in the Software without restriction, including without limitation
  7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  8 * and/or sell copies of the Software, and to permit persons to whom the
  9 * Software is furnished to do so, subject to the following conditions:
 10 *
 11 * The above copyright notice and this permission notice (including the next
 12 * paragraph) shall be included in all copies or substantial portions of the
 13 * Software.
 14 *
 15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 20 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 21 * SOFTWARE.
 22 *
 23 * Authors:
 24 *    Eric Anholt <eric@anholt.net>
 25 *
 26 */
 27
 28#ifndef _I830_BIOS_H_
 29#define _I830_BIOS_H_
 30
 31#include "drmP.h"
 32
 
 
 
 
 
 
 
 
 
 
 
 33struct vbt_header {
 34	u8 signature[20];		/**< Always starts with 'VBT$' */
 35	u16 version;			/**< decimal */
 36	u16 header_size;		/**< in bytes */
 37	u16 vbt_size;			/**< in bytes */
 38	u8 vbt_checksum;
 39	u8 reserved0;
 40	u32 bdb_offset;			/**< from beginning of VBT */
 41	u32 aim_offset[4];		/**< from beginning of VBT */
 42} __attribute__((packed));
 43
 
 
 
 
 
 
 
 44struct bdb_header {
 45	u8 signature[16];		/**< Always 'BIOS_DATA_BLOCK' */
 46	u16 version;			/**< decimal */
 47	u16 header_size;		/**< in bytes */
 48	u16 bdb_size;			/**< in bytes */
 49};
 50
 51/* strictly speaking, this is a "skip" block, but it has interesting info */
 52struct vbios_data {
 53	u8 type; /* 0 == desktop, 1 == mobile */
 54	u8 relstage;
 55	u8 chipset;
 56	u8 lvds_present:1;
 57	u8 tv_present:1;
 58	u8 rsvd2:6; /* finish byte */
 59	u8 rsvd3[4];
 60	u8 signon[155];
 61	u8 copyright[61];
 62	u16 code_segment;
 63	u8 dos_boot_mode;
 64	u8 bandwidth_percent;
 65	u8 rsvd4; /* popup memory size */
 66	u8 resize_pci_bios;
 67	u8 rsvd5; /* is crt already on ddc2 */
 68} __attribute__((packed));
 69
 70/*
 71 * There are several types of BIOS data blocks (BDBs), each block has
 72 * an ID and size in the first 3 bytes (ID in first, size in next 2).
 73 * Known types are listed below.
 74 */
 75#define BDB_GENERAL_FEATURES	  1
 76#define BDB_GENERAL_DEFINITIONS	  2
 77#define BDB_OLD_TOGGLE_LIST	  3
 78#define BDB_MODE_SUPPORT_LIST	  4
 79#define BDB_GENERIC_MODE_TABLE	  5
 80#define BDB_EXT_MMIO_REGS	  6
 81#define BDB_SWF_IO		  7
 82#define BDB_SWF_MMIO		  8
 83#define BDB_DOT_CLOCK_TABLE	  9
 84#define BDB_MODE_REMOVAL_TABLE	 10
 85#define BDB_CHILD_DEVICE_TABLE	 11
 86#define BDB_DRIVER_FEATURES	 12
 87#define BDB_DRIVER_PERSISTENCE	 13
 88#define BDB_EXT_TABLE_PTRS	 14
 89#define BDB_DOT_CLOCK_OVERRIDE	 15
 90#define BDB_DISPLAY_SELECT	 16
 91/* 17 rsvd */
 92#define BDB_DRIVER_ROTATION	 18
 93#define BDB_DISPLAY_REMOVE	 19
 94#define BDB_OEM_CUSTOM		 20
 95#define BDB_EFP_LIST		 21 /* workarounds for VGA hsync/vsync */
 96#define BDB_SDVO_LVDS_OPTIONS	 22
 97#define BDB_SDVO_PANEL_DTDS	 23
 98#define BDB_SDVO_LVDS_PNP_IDS	 24
 99#define BDB_SDVO_LVDS_POWER_SEQ	 25
100#define BDB_TV_OPTIONS		 26
101#define BDB_EDP			 27
102#define BDB_LVDS_OPTIONS	 40
103#define BDB_LVDS_LFP_DATA_PTRS	 41
104#define BDB_LVDS_LFP_DATA	 42
105#define BDB_LVDS_BACKLIGHT	 43
106#define BDB_LVDS_POWER		 44
 
 
107#define BDB_SKIP		254 /* VBIOS private block, ignore */
108
109struct bdb_general_features {
110        /* bits 1 */
111	u8 panel_fitting:2;
112	u8 flexaim:1;
113	u8 msg_enable:1;
114	u8 clear_screen:3;
115	u8 color_flip:1;
116
117        /* bits 2 */
118	u8 download_ext_vbt:1;
119	u8 enable_ssc:1;
120	u8 ssc_freq:1;
121	u8 enable_lfp_on_override:1;
122	u8 disable_ssc_ddt:1;
123	u8 rsvd8:3; /* finish byte */
 
 
124
125        /* bits 3 */
126	u8 disable_smooth_vision:1;
127	u8 single_dvi:1;
128	u8 rsvd9:6; /* finish byte */
 
 
129
130        /* bits 4 */
131	u8 legacy_monitor_detect;
132
133        /* bits 5 */
134	u8 int_crt_support:1;
135	u8 int_tv_support:1;
136	u8 rsvd11:6; /* finish byte */
137} __attribute__((packed));
 
 
 
138
139/* pre-915 */
140#define GPIO_PIN_DVI_LVDS	0x03 /* "DVI/LVDS DDC GPIO pins" */
141#define GPIO_PIN_ADD_I2C	0x05 /* "ADDCARD I2C GPIO pins" */
142#define GPIO_PIN_ADD_DDC	0x04 /* "ADDCARD DDC GPIO pins" */
143#define GPIO_PIN_ADD_DDC_I2C	0x06 /* "ADDCARD DDC/I2C GPIO pins" */
144
145/* Pre 915 */
146#define DEVICE_TYPE_NONE	0x00
147#define DEVICE_TYPE_CRT		0x01
148#define DEVICE_TYPE_TV		0x09
149#define DEVICE_TYPE_EFP		0x12
150#define DEVICE_TYPE_LFP		0x22
151/* On 915+ */
152#define DEVICE_TYPE_CRT_DPMS		0x6001
153#define DEVICE_TYPE_CRT_DPMS_HOTPLUG	0x4001
154#define DEVICE_TYPE_TV_COMPOSITE	0x0209
155#define DEVICE_TYPE_TV_MACROVISION	0x0289
156#define DEVICE_TYPE_TV_RF_COMPOSITE	0x020c
157#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE	0x0609
158#define DEVICE_TYPE_TV_SCART		0x0209
159#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
160#define DEVICE_TYPE_EFP_HOTPLUG_PWR	0x6012
161#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR	0x6052
162#define DEVICE_TYPE_EFP_DVI_I		0x6053
163#define DEVICE_TYPE_EFP_DVI_D_DUAL	0x6152
164#define DEVICE_TYPE_EFP_DVI_D_HDCP	0x60d2
165#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR	0x6062
166#define DEVICE_TYPE_OPENLDI_DUALPIX	0x6162
167#define DEVICE_TYPE_LFP_PANELLINK	0x5012
168#define DEVICE_TYPE_LFP_CMOS_PWR	0x5042
169#define DEVICE_TYPE_LFP_LVDS_PWR	0x5062
170#define DEVICE_TYPE_LFP_LVDS_DUAL	0x5162
171#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP	0x51e2
172
173#define DEVICE_CFG_NONE		0x00
174#define DEVICE_CFG_12BIT_DVOB	0x01
175#define DEVICE_CFG_12BIT_DVOC	0x02
176#define DEVICE_CFG_24BIT_DVOBC	0x09
177#define DEVICE_CFG_24BIT_DVOCB	0x0a
178#define DEVICE_CFG_DUAL_DVOB	0x11
179#define DEVICE_CFG_DUAL_DVOC	0x12
180#define DEVICE_CFG_DUAL_DVOBC	0x13
181#define DEVICE_CFG_DUAL_LINK_DVOBC	0x19
182#define DEVICE_CFG_DUAL_LINK_DVOCB	0x1a
183
184#define DEVICE_WIRE_NONE	0x00
185#define DEVICE_WIRE_DVOB	0x01
186#define DEVICE_WIRE_DVOC	0x02
187#define DEVICE_WIRE_DVOBC	0x03
188#define DEVICE_WIRE_DVOBB	0x05
189#define DEVICE_WIRE_DVOCC	0x06
190#define DEVICE_WIRE_DVOB_MASTER 0x0d
191#define DEVICE_WIRE_DVOC_MASTER 0x0e
192
193#define DEVICE_PORT_DVOA	0x00 /* none on 845+ */
194#define DEVICE_PORT_DVOB	0x01
195#define DEVICE_PORT_DVOC	0x02
196
197struct child_device_config {
 
 
 
 
 
198	u16 handle;
199	u16 device_type;
200	u8  i2c_speed;
201	u8  rsvd[9];
202	u16 addin_offset;
203	u8  dvo_port; /* See Device_PORT_* above */
204	u8  i2c_pin;
205	u8  slave_addr;
206	u8  ddc_pin;
207	u16 edid_ptr;
208	u8  dvo_cfg; /* See DEVICE_CFG_* above */
209	u8  dvo2_port;
210	u8  i2c2_pin;
211	u8  slave2_addr;
212	u8  ddc2_pin;
213	u8  capabilities;
214	u8  dvo_wiring;/* See DEVICE_WIRE_* above */
215	u8  dvo2_wiring;
216	u16 extended_type;
217	u8  dvo_function;
218} __attribute__((packed));
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
219
220struct bdb_general_definitions {
221	/* DDC GPIO */
222	u8 crt_ddc_gmbus_pin;
223
224	/* DPMS bits */
225	u8 dpms_acpi:1;
226	u8 skip_boot_crt_detect:1;
227	u8 dpms_aim:1;
228	u8 rsvd1:5; /* finish byte */
229
230	/* boot device bits */
231	u8 boot_display[2];
232	u8 child_dev_size;
233
234	/*
235	 * Device info:
236	 * If TV is present, it'll be at devices[0].
237	 * LVDS will be next, either devices[0] or [1], if present.
238	 * On some platforms the number of device is 6. But could be as few as
239	 * 4 if both TV and LVDS are missing.
240	 * And the device num is related with the size of general definition
241	 * block. It is obtained by using the following formula:
242	 * number = (block_size - sizeof(bdb_general_definitions))/
243	 * 		sizeof(child_device_config);
244	 */
245	struct child_device_config devices[0];
246} __attribute__((packed));
 
 
 
247
248struct bdb_lvds_options {
249	u8 panel_type;
250	u8 rsvd1;
251	/* LVDS capabilities, stored in a dword */
252	u8 pfit_mode:2;
253	u8 pfit_text_mode_enhanced:1;
254	u8 pfit_gfx_mode_enhanced:1;
255	u8 pfit_ratio_auto:1;
256	u8 pixel_dither:1;
257	u8 lvds_edid:1;
258	u8 rsvd2:1;
259	u8 rsvd4;
260} __attribute__((packed));
 
 
 
 
 
 
 
 
 
 
 
 
261
262/* LFP pointer table contains entries to the struct below */
263struct bdb_lvds_lfp_data_ptr {
264	u16 fp_timing_offset; /* offsets are from start of bdb */
265	u8 fp_table_size;
266	u16 dvo_timing_offset;
267	u8 dvo_table_size;
268	u16 panel_pnp_id_offset;
269	u8 pnp_table_size;
270} __attribute__((packed));
271
272struct bdb_lvds_lfp_data_ptrs {
273	u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
274	struct bdb_lvds_lfp_data_ptr ptr[16];
275} __attribute__((packed));
276
277/* LFP data has 3 blocks per entry */
278struct lvds_fp_timing {
279	u16 x_res;
280	u16 y_res;
281	u32 lvds_reg;
282	u32 lvds_reg_val;
283	u32 pp_on_reg;
284	u32 pp_on_reg_val;
285	u32 pp_off_reg;
286	u32 pp_off_reg_val;
287	u32 pp_cycle_reg;
288	u32 pp_cycle_reg_val;
289	u32 pfit_reg;
290	u32 pfit_reg_val;
291	u16 terminator;
292} __attribute__((packed));
293
294struct lvds_dvo_timing {
295	u16 clock;		/**< In 10khz */
296	u8 hactive_lo;
297	u8 hblank_lo;
298	u8 hblank_hi:4;
299	u8 hactive_hi:4;
300	u8 vactive_lo;
301	u8 vblank_lo;
302	u8 vblank_hi:4;
303	u8 vactive_hi:4;
304	u8 hsync_off_lo;
305	u8 hsync_pulse_width;
306	u8 vsync_pulse_width:4;
307	u8 vsync_off:4;
308	u8 rsvd0:6;
309	u8 hsync_off_hi:2;
310	u8 h_image;
311	u8 v_image;
312	u8 max_hv;
313	u8 h_border;
314	u8 v_border;
315	u8 rsvd1:3;
316	u8 digital:2;
317	u8 vsync_positive:1;
318	u8 hsync_positive:1;
319	u8 rsvd2:1;
320} __attribute__((packed));
321
322struct lvds_pnp_id {
323	u16 mfg_name;
324	u16 product_code;
325	u32 serial;
326	u8 mfg_week;
327	u8 mfg_year;
328} __attribute__((packed));
329
330struct bdb_lvds_lfp_data_entry {
331	struct lvds_fp_timing fp_timing;
332	struct lvds_dvo_timing dvo_timing;
333	struct lvds_pnp_id pnp_id;
334} __attribute__((packed));
335
336struct bdb_lvds_lfp_data {
337	struct bdb_lvds_lfp_data_entry data[16];
338} __attribute__((packed));
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
339
340struct aimdb_header {
341	char signature[16];
342	char oem_device[20];
343	u16 aimdb_version;
344	u16 aimdb_header_size;
345	u16 aimdb_size;
346} __attribute__((packed));
347
348struct aimdb_block {
349	u8 aimdb_id;
350	u16 aimdb_size;
351} __attribute__((packed));
352
353struct vch_panel_data {
354	u16 fp_timing_offset;
355	u8 fp_timing_size;
356	u16 dvo_timing_offset;
357	u8 dvo_timing_size;
358	u16 text_fitting_offset;
359	u8 text_fitting_size;
360	u16 graphics_fitting_offset;
361	u8 graphics_fitting_size;
362} __attribute__((packed));
363
364struct vch_bdb_22 {
365	struct aimdb_block aimdb_block;
366	struct vch_panel_data panels[16];
367} __attribute__((packed));
368
369struct bdb_sdvo_lvds_options {
370	u8 panel_backlight;
371	u8 h40_set_panel_type;
372	u8 panel_type;
373	u8 ssc_clk_freq;
374	u16 als_low_trip;
375	u16 als_high_trip;
376	u8 sclalarcoeff_tab_row_num;
377	u8 sclalarcoeff_tab_row_size;
378	u8 coefficient[8];
379	u8 panel_misc_bits_1;
380	u8 panel_misc_bits_2;
381	u8 panel_misc_bits_3;
382	u8 panel_misc_bits_4;
383} __attribute__((packed));
384
385
386#define BDB_DRIVER_FEATURE_NO_LVDS		0
387#define BDB_DRIVER_FEATURE_INT_LVDS		1
388#define BDB_DRIVER_FEATURE_SDVO_LVDS		2
389#define BDB_DRIVER_FEATURE_EDP			3
390
391struct bdb_driver_features {
392	u8 boot_dev_algorithm:1;
393	u8 block_display_switch:1;
394	u8 allow_display_switch:1;
395	u8 hotplug_dvo:1;
396	u8 dual_view_zoom:1;
397	u8 int15h_hook:1;
398	u8 sprite_in_clone:1;
399	u8 primary_lfp_id:1;
400
401	u16 boot_mode_x;
402	u16 boot_mode_y;
403	u8 boot_mode_bpp;
404	u8 boot_mode_refresh;
405
406	u16 enable_lfp_primary:1;
407	u16 selective_mode_pruning:1;
408	u16 dual_frequency:1;
409	u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
410	u16 nt_clone_support:1;
411	u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
412	u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
413	u16 cui_aspect_scaling:1;
414	u16 preserve_aspect_ratio:1;
415	u16 sdvo_device_power_down:1;
416	u16 crt_hotplug:1;
417	u16 lvds_config:2;
418	u16 tv_hotplug:1;
419	u16 hdmi_config:2;
420
421	u8 static_display:1;
422	u8 reserved2:7;
423	u16 legacy_crt_max_x;
424	u16 legacy_crt_max_y;
425	u8 legacy_crt_max_refresh;
426
427	u8 hdmi_termination;
428	u8 custom_vbt_version;
429} __attribute__((packed));
 
 
 
 
 
 
 
 
 
 
 
 
 
 
430
431#define EDP_18BPP	0
432#define EDP_24BPP	1
433#define EDP_30BPP	2
434#define EDP_RATE_1_62	0
435#define EDP_RATE_2_7	1
436#define EDP_LANE_1	0
437#define EDP_LANE_2	1
438#define EDP_LANE_4	3
439#define EDP_PREEMPHASIS_NONE	0
440#define EDP_PREEMPHASIS_3_5dB	1
441#define EDP_PREEMPHASIS_6dB	2
442#define EDP_PREEMPHASIS_9_5dB	3
443#define EDP_VSWING_0_4V		0
444#define EDP_VSWING_0_6V		1
445#define EDP_VSWING_0_8V		2
446#define EDP_VSWING_1_2V		3
447
448struct edp_power_seq {
449	u16 t3;
450	u16 t7;
451	u16 t9;
452	u16 t10;
453	u16 t12;
454} __attribute__ ((packed));
455
456struct edp_link_params {
457	u8 rate:4;
458	u8 lanes:4;
459	u8 preemphasis:4;
460	u8 vswing:4;
461} __attribute__ ((packed));
462
463struct bdb_edp {
464	struct edp_power_seq power_seqs[16];
465	u32 color_depth;
 
466	u32 sdrrs_msa_timing_delay;
467	struct edp_link_params link_params[16];
468} __attribute__ ((packed));
469
470void intel_setup_bios(struct drm_device *dev);
471bool intel_parse_bios(struct drm_device *dev);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
472
473/*
474 * Driver<->VBIOS interaction occurs through scratch bits in
475 * GR18 & SWF*.
476 */
477
478/* GR18 bits are set on display switch and hotkey events */
479#define GR18_DRIVER_SWITCH_EN	(1<<7) /* 0: VBIOS control, 1: driver control */
480#define GR18_HOTKEY_MASK	0x78 /* See also SWF4 15:0 */
481#define   GR18_HK_NONE		(0x0<<3)
482#define   GR18_HK_LFP_STRETCH	(0x1<<3)
483#define   GR18_HK_TOGGLE_DISP	(0x2<<3)
484#define   GR18_HK_DISP_SWITCH	(0x4<<3) /* see SWF14 15:0 for what to enable */
485#define   GR18_HK_POPUP_DISABLED (0x6<<3)
486#define   GR18_HK_POPUP_ENABLED	(0x7<<3)
487#define   GR18_HK_PFIT		(0x8<<3)
488#define   GR18_HK_APM_CHANGE	(0xa<<3)
489#define   GR18_HK_MULTIPLE	(0xc<<3)
490#define GR18_USER_INT_EN	(1<<2)
491#define GR18_A0000_FLUSH_EN	(1<<1)
492#define GR18_SMM_EN		(1<<0)
493
494/* Set by driver, cleared by VBIOS */
495#define SWF00_YRES_SHIFT	16
496#define SWF00_XRES_SHIFT	0
497#define SWF00_RES_MASK		0xffff
498
499/* Set by VBIOS at boot time and driver at runtime */
500#define SWF01_TV2_FORMAT_SHIFT	8
501#define SWF01_TV1_FORMAT_SHIFT	0
502#define SWF01_TV_FORMAT_MASK	0xffff
503
504#define SWF10_VBIOS_BLC_I2C_EN	(1<<29)
505#define SWF10_GTT_OVERRIDE_EN	(1<<28)
506#define SWF10_LFP_DPMS_OVR	(1<<27) /* override DPMS on display switch */
507#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
508#define   SWF10_OLD_TOGGLE	0x0
509#define   SWF10_TOGGLE_LIST_1	0x1
510#define   SWF10_TOGGLE_LIST_2	0x2
511#define   SWF10_TOGGLE_LIST_3	0x3
512#define   SWF10_TOGGLE_LIST_4	0x4
513#define SWF10_PANNING_EN	(1<<23)
514#define SWF10_DRIVER_LOADED	(1<<22)
515#define SWF10_EXTENDED_DESKTOP	(1<<21)
516#define SWF10_EXCLUSIVE_MODE	(1<<20)
517#define SWF10_OVERLAY_EN	(1<<19)
518#define SWF10_PLANEB_HOLDOFF	(1<<18)
519#define SWF10_PLANEA_HOLDOFF	(1<<17)
520#define SWF10_VGA_HOLDOFF	(1<<16)
521#define SWF10_ACTIVE_DISP_MASK	0xffff
522#define   SWF10_PIPEB_LFP2	(1<<15)
523#define   SWF10_PIPEB_EFP2	(1<<14)
524#define   SWF10_PIPEB_TV2	(1<<13)
525#define   SWF10_PIPEB_CRT2	(1<<12)
526#define   SWF10_PIPEB_LFP	(1<<11)
527#define   SWF10_PIPEB_EFP	(1<<10)
528#define   SWF10_PIPEB_TV	(1<<9)
529#define   SWF10_PIPEB_CRT	(1<<8)
530#define   SWF10_PIPEA_LFP2	(1<<7)
531#define   SWF10_PIPEA_EFP2	(1<<6)
532#define   SWF10_PIPEA_TV2	(1<<5)
533#define   SWF10_PIPEA_CRT2	(1<<4)
534#define   SWF10_PIPEA_LFP	(1<<3)
535#define   SWF10_PIPEA_EFP	(1<<2)
536#define   SWF10_PIPEA_TV	(1<<1)
537#define   SWF10_PIPEA_CRT	(1<<0)
538
539#define SWF11_MEMORY_SIZE_SHIFT	16
540#define SWF11_SV_TEST_EN	(1<<15)
541#define SWF11_IS_AGP		(1<<14)
542#define SWF11_DISPLAY_HOLDOFF	(1<<13)
543#define SWF11_DPMS_REDUCED	(1<<12)
544#define SWF11_IS_VBE_MODE	(1<<11)
545#define SWF11_PIPEB_ACCESS	(1<<10) /* 0 here means pipe a */
546#define SWF11_DPMS_MASK		0x07
547#define   SWF11_DPMS_OFF	(1<<2)
548#define   SWF11_DPMS_SUSPEND	(1<<1)
549#define   SWF11_DPMS_STANDBY	(1<<0)
550#define   SWF11_DPMS_ON		0
551
552#define SWF14_GFX_PFIT_EN	(1<<31)
553#define SWF14_TEXT_PFIT_EN	(1<<30)
554#define SWF14_LID_STATUS_CLOSED	(1<<29) /* 0 here means open */
555#define SWF14_POPUP_EN		(1<<28)
556#define SWF14_DISPLAY_HOLDOFF	(1<<27)
557#define SWF14_DISP_DETECT_EN	(1<<26)
558#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
559#define SWF14_DRIVER_STATUS	(1<<24)
560#define SWF14_OS_TYPE_WIN9X	(1<<23)
561#define SWF14_OS_TYPE_WINNT	(1<<22)
562/* 21:19 rsvd */
563#define SWF14_PM_TYPE_MASK	0x00070000
564#define   SWF14_PM_ACPI_VIDEO	(0x4 << 16)
565#define   SWF14_PM_ACPI		(0x3 << 16)
566#define   SWF14_PM_APM_12	(0x2 << 16)
567#define   SWF14_PM_APM_11	(0x1 << 16)
568#define SWF14_HK_REQUEST_MASK	0x0000ffff /* see GR18 6:3 for event type */
569          /* if GR18 indicates a display switch */
570#define   SWF14_DS_PIPEB_LFP2_EN (1<<15)
571#define   SWF14_DS_PIPEB_EFP2_EN (1<<14)
572#define   SWF14_DS_PIPEB_TV2_EN  (1<<13)
573#define   SWF14_DS_PIPEB_CRT2_EN (1<<12)
574#define   SWF14_DS_PIPEB_LFP_EN  (1<<11)
575#define   SWF14_DS_PIPEB_EFP_EN  (1<<10)
576#define   SWF14_DS_PIPEB_TV_EN   (1<<9)
577#define   SWF14_DS_PIPEB_CRT_EN  (1<<8)
578#define   SWF14_DS_PIPEA_LFP2_EN (1<<7)
579#define   SWF14_DS_PIPEA_EFP2_EN (1<<6)
580#define   SWF14_DS_PIPEA_TV2_EN  (1<<5)
581#define   SWF14_DS_PIPEA_CRT2_EN (1<<4)
582#define   SWF14_DS_PIPEA_LFP_EN  (1<<3)
583#define   SWF14_DS_PIPEA_EFP_EN  (1<<2)
584#define   SWF14_DS_PIPEA_TV_EN   (1<<1)
585#define   SWF14_DS_PIPEA_CRT_EN  (1<<0)
586          /* if GR18 indicates a panel fitting request */
587#define   SWF14_PFIT_EN		(1<<0) /* 0 means disable */
588          /* if GR18 indicates an APM change request */
589#define   SWF14_APM_HIBERNATE	0x4
590#define   SWF14_APM_SUSPEND	0x3
591#define   SWF14_APM_STANDBY	0x1
592#define   SWF14_APM_RESTORE	0x0
593
594/* Add the device class for LFP, TV, HDMI */
595#define	 DEVICE_TYPE_INT_LFP	0x1022
596#define	 DEVICE_TYPE_INT_TV	0x1009
597#define	 DEVICE_TYPE_HDMI	0x60D2
598#define	 DEVICE_TYPE_DP		0x68C6
599#define	 DEVICE_TYPE_eDP	0x78C6
600
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
601/* define the DVO port for HDMI output type */
602#define		DVO_B		1
603#define		DVO_C		2
604#define		DVO_D		3
605
606/* define the PORT for DP output type */
607#define		PORT_IDPB	7
608#define		PORT_IDPC	8
609#define		PORT_IDPD	9
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
610
611#endif /* _I830_BIOS_H_ */