Loading...
1/*
2 * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
3 *
4 * Marvell Orion-1-90 AP GE Reference Design Setup
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10#include <linux/gpio.h>
11#include <linux/kernel.h>
12#include <linux/init.h>
13#include <linux/platform_device.h>
14#include <linux/pci.h>
15#include <linux/irq.h>
16#include <linux/mtd/physmap.h>
17#include <linux/mv643xx_eth.h>
18#include <linux/spi/spi.h>
19#include <linux/spi/flash.h>
20#include <linux/ethtool.h>
21#include <net/dsa.h>
22#include <asm/mach-types.h>
23#include <asm/mach/arch.h>
24#include <asm/mach/pci.h>
25#include "common.h"
26#include "orion5x.h"
27
28static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
29 .phy_addr = -1,
30 .speed = SPEED_1000,
31 .duplex = DUPLEX_FULL,
32};
33
34static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
35 .port_names[0] = "lan1",
36 .port_names[1] = "lan2",
37 .port_names[2] = "lan3",
38 .port_names[3] = "lan4",
39 .port_names[4] = "wan",
40 .port_names[5] = "cpu",
41};
42
43static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
44 .nr_chips = 1,
45 .chip = &rd88f6183ap_ge_switch_chip_data,
46};
47
48static struct mtd_partition rd88f6183ap_ge_partitions[] = {
49 {
50 .name = "kernel",
51 .offset = 0x00000000,
52 .size = 0x00200000,
53 }, {
54 .name = "rootfs",
55 .offset = 0x00200000,
56 .size = 0x00500000,
57 }, {
58 .name = "nvram",
59 .offset = 0x00700000,
60 .size = 0x00080000,
61 },
62};
63
64static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
65 .type = "m25p64",
66 .nr_parts = ARRAY_SIZE(rd88f6183ap_ge_partitions),
67 .parts = rd88f6183ap_ge_partitions,
68};
69
70static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
71 {
72 .modalias = "m25p80",
73 .platform_data = &rd88f6183ap_ge_spi_slave_data,
74 .irq = NO_IRQ,
75 .max_speed_hz = 20000000,
76 .bus_num = 0,
77 .chip_select = 0,
78 },
79};
80
81static void __init rd88f6183ap_ge_init(void)
82{
83 /*
84 * Setup basic Orion functions. Need to be called early.
85 */
86 orion5x_init();
87
88 /*
89 * Configure peripherals.
90 */
91 orion5x_ehci0_init();
92 orion5x_eth_init(&rd88f6183ap_ge_eth_data);
93 orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
94 gpio_to_irq(3));
95 spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
96 ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
97 orion5x_spi_init();
98 orion5x_uart0_init();
99}
100
101static struct hw_pci rd88f6183ap_ge_pci __initdata = {
102 .nr_controllers = 2,
103 .setup = orion5x_pci_sys_setup,
104 .scan = orion5x_pci_sys_scan_bus,
105 .map_irq = orion5x_pci_map_irq,
106};
107
108static int __init rd88f6183ap_ge_pci_init(void)
109{
110 if (machine_is_rd88f6183ap_ge()) {
111 orion5x_pci_disable();
112 pci_common_init(&rd88f6183ap_ge_pci);
113 }
114
115 return 0;
116}
117subsys_initcall(rd88f6183ap_ge_pci_init);
118
119MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
120 /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
121 .atag_offset = 0x100,
122 .nr_irqs = ORION5X_NR_IRQS,
123 .init_machine = rd88f6183ap_ge_init,
124 .map_io = orion5x_map_io,
125 .init_early = orion5x_init_early,
126 .init_irq = orion5x_init_irq,
127 .init_time = orion5x_timer_init,
128 .fixup = tag_fixup_mem32,
129 .restart = orion5x_restart,
130MACHINE_END
1/*
2 * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
3 *
4 * Marvell Orion-1-90 AP GE Reference Design Setup
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11#include <linux/kernel.h>
12#include <linux/init.h>
13#include <linux/platform_device.h>
14#include <linux/pci.h>
15#include <linux/irq.h>
16#include <linux/mtd/physmap.h>
17#include <linux/mv643xx_eth.h>
18#include <linux/spi/spi.h>
19#include <linux/spi/orion_spi.h>
20#include <linux/spi/flash.h>
21#include <linux/ethtool.h>
22#include <net/dsa.h>
23#include <asm/mach-types.h>
24#include <asm/gpio.h>
25#include <asm/leds.h>
26#include <asm/mach/arch.h>
27#include <asm/mach/pci.h>
28#include <mach/orion5x.h>
29#include "common.h"
30
31static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
32 .phy_addr = -1,
33 .speed = SPEED_1000,
34 .duplex = DUPLEX_FULL,
35};
36
37static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
38 .port_names[0] = "lan1",
39 .port_names[1] = "lan2",
40 .port_names[2] = "lan3",
41 .port_names[3] = "lan4",
42 .port_names[4] = "wan",
43 .port_names[5] = "cpu",
44};
45
46static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
47 .nr_chips = 1,
48 .chip = &rd88f6183ap_ge_switch_chip_data,
49};
50
51static struct mtd_partition rd88f6183ap_ge_partitions[] = {
52 {
53 .name = "kernel",
54 .offset = 0x00000000,
55 .size = 0x00200000,
56 }, {
57 .name = "rootfs",
58 .offset = 0x00200000,
59 .size = 0x00500000,
60 }, {
61 .name = "nvram",
62 .offset = 0x00700000,
63 .size = 0x00080000,
64 },
65};
66
67static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
68 .type = "m25p64",
69 .nr_parts = ARRAY_SIZE(rd88f6183ap_ge_partitions),
70 .parts = rd88f6183ap_ge_partitions,
71};
72
73static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
74 {
75 .modalias = "m25p80",
76 .platform_data = &rd88f6183ap_ge_spi_slave_data,
77 .irq = NO_IRQ,
78 .max_speed_hz = 20000000,
79 .bus_num = 0,
80 .chip_select = 0,
81 },
82};
83
84static void __init rd88f6183ap_ge_init(void)
85{
86 /*
87 * Setup basic Orion functions. Need to be called early.
88 */
89 orion5x_init();
90
91 /*
92 * Configure peripherals.
93 */
94 orion5x_ehci0_init();
95 orion5x_eth_init(&rd88f6183ap_ge_eth_data);
96 orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
97 gpio_to_irq(3));
98 spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
99 ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
100 orion5x_spi_init();
101 orion5x_uart0_init();
102}
103
104static struct hw_pci rd88f6183ap_ge_pci __initdata = {
105 .nr_controllers = 2,
106 .swizzle = pci_std_swizzle,
107 .setup = orion5x_pci_sys_setup,
108 .scan = orion5x_pci_sys_scan_bus,
109 .map_irq = orion5x_pci_map_irq,
110};
111
112static int __init rd88f6183ap_ge_pci_init(void)
113{
114 if (machine_is_rd88f6183ap_ge()) {
115 orion5x_pci_disable();
116 pci_common_init(&rd88f6183ap_ge_pci);
117 }
118
119 return 0;
120}
121subsys_initcall(rd88f6183ap_ge_pci_init);
122
123MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
124 /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
125 .boot_params = 0x00000100,
126 .init_machine = rd88f6183ap_ge_init,
127 .map_io = orion5x_map_io,
128 .init_early = orion5x_init_early,
129 .init_irq = orion5x_init_irq,
130 .timer = &orion5x_timer,
131 .fixup = tag_fixup_mem32,
132MACHINE_END