1/*
  2 * DTS file for SPEAr320 Evaluation Baord
  3 *
  4 * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
  5 *
  6 * The code contained herein is licensed under the GNU General Public
  7 * License. You may obtain a copy of the GNU General Public License
  8 * Version 2 or later at the following locations:
  9 *
 10 * http://www.opensource.org/licenses/gpl-license.html
 11 * http://www.gnu.org/copyleft/gpl.html
 12 */
 13
 14/dts-v1/;
 15/include/ "spear320.dtsi"
 16
 17/ {
 18	model = "ST SPEAr320 Evaluation Board";
 19	compatible = "st,spear320-evb", "st,spear320";
 20	#address-cells = <1>;
 21	#size-cells = <1>;
 22
 23	memory {
 24		reg = <0 0x40000000>;
 25	};
 26
 27	ahb {
 28		pinmux@b3000000 {
 29			st,pinmux-mode = <4>;
 30			pinctrl-names = "default";
 31			pinctrl-0 = <&state_default>;
 32
 33			state_default: pinmux {
 34				i2c0 {
 35					st,pins = "i2c0_grp";
 36					st,function = "i2c0";
 37				};
 38				mii0 {
 39					st,pins = "mii0_grp";
 40					st,function = "mii0";
 41				};
 42				ssp0 {
 43					st,pins = "ssp0_grp";
 44					st,function = "ssp0";
 45				};
 46				uart0 {
 47					st,pins = "uart0_grp";
 48					st,function = "uart0";
 49				};
 50				sdhci {
 51					st,pins = "sdhci_cd_51_grp";
 52					st,function = "sdhci";
 53				};
 54				i2s {
 55					st,pins = "i2s_grp";
 56					st,function = "i2s";
 57				};
 58				uart1 {
 59					st,pins = "uart1_grp";
 60					st,function = "uart1";
 61				};
 62				uart2 {
 63					st,pins = "uart2_grp";
 64					st,function = "uart2";
 65				};
 66				can0 {
 67					st,pins = "can0_grp";
 68					st,function = "can0";
 69				};
 70				can1 {
 71					st,pins = "can1_grp";
 72					st,function = "can1";
 73				};
 74				mii2 {
 75					st,pins = "mii2_grp";
 76					st,function = "mii2";
 77				};
 78				pwm0_1 {
 79					st,pins = "pwm0_1_pin_37_38_grp";
 80					st,function = "pwm0_1";
 81				};
 82			};
 83		};
 84
 85		dma@fc400000 {
 86			status = "okay";
 87		};
 88
 89		fsmc: flash@4c000000 {
 90			status = "okay";
 91		};
 92
 93		gmac: eth@e0800000 {
 94			status = "okay";
 95		};
 96
 97		sdhci@70000000 {
 98			power-gpio = <&gpiopinctrl 61 1>;
 99			status = "okay";
100		};
101
102		smi: flash@fc000000 {
103			status = "okay";
104			clock-rate=<50000000>;
105
106			flash@f8000000 {
107				#address-cells = <1>;
108				#size-cells = <1>;
109				reg = <0xf8000000 0x800000>;
110				st,smi-fast-mode;
111
112				partition@0 {
113					label = "xloader";
114					reg = <0x0 0x10000>;
115				};
116				partition@10000 {
117					label = "u-boot";
118					reg = <0x10000 0x50000>;
119				};
120				partition@60000 {
121					label = "environment";
122					reg = <0x60000 0x10000>;
123				};
124				partition@70000 {
125					label = "dtb";
126					reg = <0x70000 0x10000>;
127				};
128				partition@80000 {
129					label = "linux";
130					reg = <0x80000 0x310000>;
131				};
132				partition@390000 {
133					label = "rootfs";
134					reg = <0x390000 0x0>;
135				};
136			};
137		};
138
139		spi0: spi@d0100000 {
140			status = "okay";
141		};
142
143		spi1: spi@a5000000 {
144			status = "okay";
145		};
146
147		spi2: spi@a6000000 {
148			status = "okay";
149		};
150
151		ehci@e1800000 {
152			status = "okay";
153		};
154
155		ohci@e1900000 {
156			status = "okay";
157		};
158
159		ohci@e2100000 {
160			status = "okay";
161		};
162
163		apb {
164			gpio0: gpio@fc980000 {
165			       status = "okay";
166			};
167
168			gpio@b3000000 {
169			       status = "okay";
170			};
171
172			i2c0: i2c@d0180000 {
173			       status = "okay";
174			};
175
176			i2c1: i2c@a7000000 {
177			       status = "okay";
178			};
179
180			rtc@fc900000 {
181			       status = "okay";
182			};
183
184			serial@d0000000 {
185			       status = "okay";
186				pinctrl-names = "default";
187				pinctrl-0 = <>;
188			};
189
190			serial@a3000000 {
191			       status = "okay";
192				pinctrl-names = "default";
193				pinctrl-0 = <>;
194			};
195
196			serial@a4000000 {
197			       status = "okay";
198				pinctrl-names = "default";
199				pinctrl-0 = <>;
200			};
201
202			wdt@fc880000 {
203			       status = "okay";
204			};
205		};
206	};
207};