Loading...
Note: File does not exist in v6.9.4.
1/*
2 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "omap443x.dtsi"
11#include "elpida_ecb240abacn.dtsi"
12
13/ {
14 model = "TI OMAP4 SDP board";
15 compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
16
17 memory@80000000 {
18 device_type = "memory";
19 reg = <0x80000000 0x40000000>; /* 1 GB */
20 };
21
22 aliases {
23 display0 = &lcd0;
24 display1 = &lcd1;
25 display2 = &hdmi0;
26 };
27
28 vdd_eth: fixedregulator-vdd-eth {
29 compatible = "regulator-fixed";
30 regulator-name = "VDD_ETH";
31 regulator-min-microvolt = <3300000>;
32 regulator-max-microvolt = <3300000>;
33 gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
34 enable-active-high;
35 regulator-boot-on;
36 };
37
38 vbat: fixedregulator-vbat {
39 compatible = "regulator-fixed";
40 regulator-name = "VBAT";
41 regulator-min-microvolt = <3750000>;
42 regulator-max-microvolt = <3750000>;
43 regulator-boot-on;
44 };
45
46 leds {
47 compatible = "gpio-leds";
48 debug0 {
49 label = "omap4:green:debug0";
50 gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
51 };
52
53 debug1 {
54 label = "omap4:green:debug1";
55 gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
56 };
57
58 debug2 {
59 label = "omap4:green:debug2";
60 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
61 };
62
63 debug3 {
64 label = "omap4:green:debug3";
65 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
66 };
67
68 debug4 {
69 label = "omap4:green:debug4";
70 gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
71 };
72
73 user1 {
74 label = "omap4:blue:user";
75 gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
76 };
77
78 user2 {
79 label = "omap4:red:user";
80 gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
81 };
82
83 user3 {
84 label = "omap4:green:user";
85 gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
86 };
87 };
88
89 pwmleds {
90 compatible = "pwm-leds";
91 kpad {
92 label = "omap4::keypad";
93 pwms = <&twl_pwm 0 7812500>;
94 max-brightness = <127>;
95 };
96
97 charging {
98 label = "omap4:green:chrg";
99 pwms = <&twl_pwmled 0 7812500>;
100 max-brightness = <255>;
101 };
102 };
103
104 backlight {
105 compatible = "pwm-backlight";
106 pwms = <&twl_pwm 1 7812500>;
107 brightness-levels = <
108 0 10 20 30 40
109 50 60 70 80 90
110 100 110 120 127
111 >;
112 default-brightness-level = <13>;
113 };
114
115 sound {
116 compatible = "ti,abe-twl6040";
117 ti,model = "SDP4430";
118
119 ti,jack-detection = <1>;
120 ti,mclk-freq = <38400000>;
121
122 ti,mcpdm = <&mcpdm>;
123 ti,dmic = <&dmic>;
124
125 ti,twl6040 = <&twl6040>;
126
127 /* Audio routing */
128 ti,audio-routing =
129 "Headset Stereophone", "HSOL",
130 "Headset Stereophone", "HSOR",
131 "Earphone Spk", "EP",
132 "Ext Spk", "HFL",
133 "Ext Spk", "HFR",
134 "Line Out", "AUXL",
135 "Line Out", "AUXR",
136 "Vibrator", "VIBRAL",
137 "Vibrator", "VIBRAR",
138 "HSMIC", "Headset Mic",
139 "Headset Mic", "Headset Mic Bias",
140 "MAINMIC", "Main Handset Mic",
141 "Main Handset Mic", "Main Mic Bias",
142 "SUBMIC", "Sub Handset Mic",
143 "Sub Handset Mic", "Main Mic Bias",
144 "AFML", "Line In",
145 "AFMR", "Line In",
146 "DMic", "Digital Mic",
147 "Digital Mic", "Digital Mic1 Bias";
148 };
149
150 /* regulator for wl12xx on sdio5 */
151 wl12xx_vmmc: wl12xx_vmmc {
152 pinctrl-names = "default";
153 pinctrl-0 = <&wl12xx_gpio>;
154 compatible = "regulator-fixed";
155 regulator-name = "vwl1271";
156 regulator-min-microvolt = <1800000>;
157 regulator-max-microvolt = <1800000>;
158 gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
159 startup-delay-us = <70000>;
160 enable-active-high;
161 };
162
163 tpd12s015: encoder {
164 compatible = "ti,tpd12s015";
165
166 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
167 <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
168 <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
169
170 ports {
171 #address-cells = <1>;
172 #size-cells = <0>;
173
174 port@0 {
175 reg = <0>;
176
177 tpd12s015_in: endpoint {
178 remote-endpoint = <&hdmi_out>;
179 };
180 };
181
182 port@1 {
183 reg = <1>;
184
185 tpd12s015_out: endpoint {
186 remote-endpoint = <&hdmi_connector_in>;
187 };
188 };
189 };
190 };
191
192 hdmi0: connector {
193 compatible = "hdmi-connector";
194 label = "hdmi";
195
196 type = "c";
197
198 port {
199 hdmi_connector_in: endpoint {
200 remote-endpoint = <&tpd12s015_out>;
201 };
202 };
203 };
204};
205
206&omap4_pmx_core {
207 pinctrl-names = "default";
208 pinctrl-0 = <
209 &dss_hdmi_pins
210 &tpd12s015_pins
211 >;
212
213 uart2_pins: pinmux_uart2_pins {
214 pinctrl-single,pins = <
215 OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
216 OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
217 OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
218 OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
219 >;
220 };
221
222 uart3_pins: pinmux_uart3_pins {
223 pinctrl-single,pins = <
224 OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
225 OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
226 OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
227 OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
228 >;
229 };
230
231 uart4_pins: pinmux_uart4_pins {
232 pinctrl-single,pins = <
233 OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
234 OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
235 >;
236 };
237
238 twl6040_pins: pinmux_twl6040_pins {
239 pinctrl-single,pins = <
240 OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
241 OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
242 >;
243 };
244
245 mcpdm_pins: pinmux_mcpdm_pins {
246 pinctrl-single,pins = <
247 OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
248 OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
249 OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
250 OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
251 OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
252 >;
253 };
254
255 dmic_pins: pinmux_dmic_pins {
256 pinctrl-single,pins = <
257 OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
258 OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
259 OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
260 OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
261 >;
262 };
263
264 mcbsp1_pins: pinmux_mcbsp1_pins {
265 pinctrl-single,pins = <
266 OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
267 OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
268 OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
269 OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
270 >;
271 };
272
273 mcbsp2_pins: pinmux_mcbsp2_pins {
274 pinctrl-single,pins = <
275 OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
276 OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
277 OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
278 OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
279 >;
280 };
281
282 mcspi1_pins: pinmux_mcspi1_pins {
283 pinctrl-single,pins = <
284 OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
285 OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
286 OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
287 OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
288 >;
289 };
290
291 dss_hdmi_pins: pinmux_dss_hdmi_pins {
292 pinctrl-single,pins = <
293 OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
294 OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
295 OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
296 >;
297 };
298
299 tpd12s015_pins: pinmux_tpd12s015_pins {
300 pinctrl-single,pins = <
301 OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
302 OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
303 OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
304 >;
305 };
306
307 i2c1_pins: pinmux_i2c1_pins {
308 pinctrl-single,pins = <
309 OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
310 OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
311 >;
312 };
313
314 i2c2_pins: pinmux_i2c2_pins {
315 pinctrl-single,pins = <
316 OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
317 OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
318 >;
319 };
320
321 i2c3_pins: pinmux_i2c3_pins {
322 pinctrl-single,pins = <
323 OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
324 OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
325 >;
326 };
327
328 i2c4_pins: pinmux_i2c4_pins {
329 pinctrl-single,pins = <
330 OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
331 OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
332 >;
333 };
334
335 /* wl12xx GPIO output for WLAN_EN */
336 wl12xx_gpio: pinmux_wl12xx_gpio {
337 pinctrl-single,pins = <
338 OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
339 >;
340 };
341
342 /* wl12xx GPIO inputs and SDIO pins */
343 wl12xx_pins: pinmux_wl12xx_pins {
344 pinctrl-single,pins = <
345 OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
346 OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
347 OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
348 OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
349 OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
350 OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
351 OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
352 >;
353 };
354};
355
356&i2c1 {
357 pinctrl-names = "default";
358 pinctrl-0 = <&i2c1_pins>;
359
360 clock-frequency = <400000>;
361
362 twl: twl@48 {
363 reg = <0x48>;
364 /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
365 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
366 };
367
368 twl6040: twl@4b {
369 compatible = "ti,twl6040";
370 #clock-cells = <0>;
371 reg = <0x4b>;
372
373 pinctrl-names = "default";
374 pinctrl-0 = <&twl6040_pins>;
375
376 /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
377 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
378 ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
379
380 vio-supply = <&v1v8>;
381 v2v1-supply = <&v2v1>;
382 enable-active-high;
383
384 /* regulators for vibra motor */
385 vddvibl-supply = <&vbat>;
386 vddvibr-supply = <&vbat>;
387
388 vibra {
389 /* Vibra driver, motor resistance parameters */
390 ti,vibldrv-res = <8>;
391 ti,vibrdrv-res = <3>;
392 ti,viblmotor-res = <10>;
393 ti,vibrmotor-res = <10>;
394 };
395 };
396};
397
398#include "twl6030.dtsi"
399#include "twl6030_omap4.dtsi"
400
401&i2c2 {
402 pinctrl-names = "default";
403 pinctrl-0 = <&i2c2_pins>;
404
405 clock-frequency = <400000>;
406};
407
408&i2c3 {
409 pinctrl-names = "default";
410 pinctrl-0 = <&i2c3_pins>;
411
412 clock-frequency = <400000>;
413
414 /*
415 * Temperature Sensor
416 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
417 */
418 tmp105@48 {
419 compatible = "ti,tmp105";
420 reg = <0x48>;
421 };
422
423 /*
424 * Ambient Light Sensor
425 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
426 */
427 bh1780@29 {
428 compatible = "rohm,bh1780";
429 reg = <0x29>;
430 };
431};
432
433&i2c4 {
434 pinctrl-names = "default";
435 pinctrl-0 = <&i2c4_pins>;
436
437 clock-frequency = <400000>;
438
439 /*
440 * 3-Axis Digital Compass
441 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
442 */
443 hmc5843@1e {
444 compatible = "honeywell,hmc5843";
445 reg = <0x1e>;
446 };
447};
448
449&mcspi1 {
450 pinctrl-names = "default";
451 pinctrl-0 = <&mcspi1_pins>;
452
453 eth@0 {
454 compatible = "ks8851";
455 spi-max-frequency = <24000000>;
456 reg = <0>;
457 interrupt-parent = <&gpio2>;
458 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
459 vdd-supply = <&vdd_eth>;
460 };
461};
462
463&mmc1 {
464 vmmc-supply = <&vmmc>;
465 bus-width = <8>;
466};
467
468&mmc2 {
469 vmmc-supply = <&vaux1>;
470 bus-width = <8>;
471 ti,non-removable;
472};
473
474&mmc3 {
475 status = "disabled";
476};
477
478&mmc4 {
479 status = "disabled";
480};
481
482&mmc5 {
483 pinctrl-names = "default";
484 pinctrl-0 = <&wl12xx_pins>;
485 vmmc-supply = <&wl12xx_vmmc>;
486 non-removable;
487 bus-width = <4>;
488 cap-power-off-card;
489
490 #address-cells = <1>;
491 #size-cells = <0>;
492 wlcore: wlcore@2 {
493 compatible = "ti,wl1281";
494 reg = <2>;
495 interrupt-parent = <&gpio1>;
496 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
497 ref-clock-frequency = <26000000>;
498 tcxo-clock-frequency = <26000000>;
499 };
500};
501
502&emif1 {
503 cs1-used;
504 device-handle = <&elpida_ECB240ABACN>;
505};
506
507&emif2 {
508 cs1-used;
509 device-handle = <&elpida_ECB240ABACN>;
510};
511
512&keypad {
513 keypad,num-rows = <8>;
514 keypad,num-columns = <8>;
515 linux,keymap = <0x00000012 /* KEY_E */
516 0x00010013 /* KEY_R */
517 0x00020014 /* KEY_T */
518 0x00030066 /* KEY_HOME */
519 0x0004003f /* KEY_F5 */
520 0x000500f0 /* KEY_UNKNOWN */
521 0x00060017 /* KEY_I */
522 0x0007002a /* KEY_LEFTSHIFT */
523 0x01000020 /* KEY_D*/
524 0x01010021 /* KEY_F */
525 0x01020022 /* KEY_G */
526 0x010300e7 /* KEY_SEND */
527 0x01040040 /* KEY_F6 */
528 0x010500f0 /* KEY_UNKNOWN */
529 0x01060025 /* KEY_K */
530 0x0107001c /* KEY_ENTER */
531 0x0200002d /* KEY_X */
532 0x0201002e /* KEY_C */
533 0x0202002f /* KEY_V */
534 0x0203006b /* KEY_END */
535 0x02040041 /* KEY_F7 */
536 0x020500f0 /* KEY_UNKNOWN */
537 0x02060034 /* KEY_DOT */
538 0x0207003a /* KEY_CAPSLOCK */
539 0x0300002c /* KEY_Z */
540 0x0301004e /* KEY_KPLUS */
541 0x03020030 /* KEY_B */
542 0x0303003b /* KEY_F1 */
543 0x03040042 /* KEY_F8 */
544 0x030500f0 /* KEY_UNKNOWN */
545 0x03060018 /* KEY_O */
546 0x03070039 /* KEY_SPACE */
547 0x04000011 /* KEY_W */
548 0x04010015 /* KEY_Y */
549 0x04020016 /* KEY_U */
550 0x0403003c /* KEY_F2 */
551 0x04040073 /* KEY_VOLUMEUP */
552 0x040500f0 /* KEY_UNKNOWN */
553 0x04060026 /* KEY_L */
554 0x04070069 /* KEY_LEFT */
555 0x0500001f /* KEY_S */
556 0x05010023 /* KEY_H */
557 0x05020024 /* KEY_J */
558 0x0503003d /* KEY_F3 */
559 0x05040043 /* KEY_F9 */
560 0x05050072 /* KEY_VOLUMEDOWN */
561 0x05060032 /* KEY_M */
562 0x0507006a /* KEY_RIGHT */
563 0x06000010 /* KEY_Q */
564 0x0601001e /* KEY_A */
565 0x06020031 /* KEY_N */
566 0x0603009e /* KEY_BACK */
567 0x0604000e /* KEY_BACKSPACE */
568 0x060500f0 /* KEY_UNKNOWN */
569 0x06060019 /* KEY_P */
570 0x06070067 /* KEY_UP */
571 0x07000094 /* KEY_PROG1 */
572 0x07010095 /* KEY_PROG2 */
573 0x070200ca /* KEY_PROG3 */
574 0x070300cb /* KEY_PROG4 */
575 0x0704003e /* KEY_F4 */
576 0x070500f0 /* KEY_UNKNOWN */
577 0x07060160 /* KEY_OK */
578 0x0707006c>; /* KEY_DOWN */
579 linux,input-no-autorepeat;
580};
581
582&uart2 {
583 interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
584 &omap4_pmx_core OMAP4_UART2_RX>;
585 pinctrl-names = "default";
586 pinctrl-0 = <&uart2_pins>;
587};
588
589&uart3 {
590 interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
591 &omap4_pmx_core OMAP4_UART3_RX>;
592 pinctrl-names = "default";
593 pinctrl-0 = <&uart3_pins>;
594};
595
596&uart4 {
597 interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
598 &omap4_pmx_core OMAP4_UART4_RX>;
599 pinctrl-names = "default";
600 pinctrl-0 = <&uart4_pins>;
601};
602
603&mcbsp1 {
604 pinctrl-names = "default";
605 pinctrl-0 = <&mcbsp1_pins>;
606 status = "okay";
607};
608
609&mcbsp2 {
610 pinctrl-names = "default";
611 pinctrl-0 = <&mcbsp2_pins>;
612 status = "okay";
613};
614
615&dmic {
616 pinctrl-names = "default";
617 pinctrl-0 = <&dmic_pins>;
618 status = "okay";
619};
620
621&mcpdm {
622 pinctrl-names = "default";
623 pinctrl-0 = <&mcpdm_pins>;
624
625 clocks = <&twl6040>;
626 clock-names = "pdmclk";
627
628 status = "okay";
629};
630
631&twl_usb_comparator {
632 usb-supply = <&vusb>;
633};
634
635&usb_otg_hs {
636 interface-type = <1>;
637 mode = <3>;
638 power = <50>;
639};
640
641&dss {
642 status = "ok";
643};
644
645&dsi1 {
646 status = "ok";
647 vdd-supply = <&vcxio>;
648
649 port {
650 dsi1_out_ep: endpoint {
651 remote-endpoint = <&lcd0_in>;
652 lanes = <0 1 2 3 4 5>;
653 };
654 };
655
656 lcd0: display {
657 compatible = "tpo,taal", "panel-dsi-cm";
658 label = "lcd0";
659
660 reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
661
662 port {
663 lcd0_in: endpoint {
664 remote-endpoint = <&dsi1_out_ep>;
665 };
666 };
667 };
668};
669
670&dsi2 {
671 status = "ok";
672 vdd-supply = <&vcxio>;
673
674 port {
675 dsi2_out_ep: endpoint {
676 remote-endpoint = <&lcd1_in>;
677 lanes = <0 1 2 3 4 5>;
678 };
679 };
680
681 lcd1: display {
682 compatible = "tpo,taal", "panel-dsi-cm";
683 label = "lcd1";
684
685 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
686
687 port {
688 lcd1_in: endpoint {
689 remote-endpoint = <&dsi2_out_ep>;
690 };
691 };
692 };
693};
694
695&hdmi {
696 status = "ok";
697 vdda-supply = <&vdac>;
698
699 port {
700 hdmi_out: endpoint {
701 remote-endpoint = <&tpd12s015_in>;
702 };
703 };
704};