Loading...
Note: File does not exist in v6.9.4.
1/*
2 * Copyright (C) 2015
3 * Nikolaus Schaller <hns@goldelico.com>
4 *
5 * Common device tree include for OpenPandora devices.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <dt-bindings/input/input.h>
13
14/ {
15 cpus {
16 cpu@0 {
17 cpu0-supply = <&vcc>;
18 };
19 };
20
21 memory@80000000 {
22 device_type = "memory";
23 reg = <0x80000000 0x20000000>; /* 512 MB */
24 };
25
26 aliases {
27 display0 = &lcd;
28 };
29
30 tv: connector {
31 compatible = "connector-analog-tv";
32 label = "tv";
33
34 port {
35 tv_connector_in: endpoint {
36 remote-endpoint = <&venc_out>;
37 };
38 };
39 };
40
41 gpio-leds {
42
43 compatible = "gpio-leds";
44
45 pinctrl-names = "default";
46 pinctrl-0 = <&led_pins>;
47
48 led1 {
49 label = "pandora::sd1";
50 gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
51 linux,default-trigger = "mmc0";
52 default-state = "off";
53 };
54
55 led2 {
56 label = "pandora::sd2";
57 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
58 linux,default-trigger = "mmc1";
59 default-state = "off";
60 };
61
62 led3 {
63 label = "pandora::bluetooth";
64 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
65 linux,default-trigger = "heartbeat";
66 default-state = "off";
67 };
68
69 led4 {
70 label = "pandora::wifi";
71 gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
72 linux,default-trigger = "mmc2";
73 default-state = "off";
74 };
75 };
76
77 gpio-keys {
78 compatible = "gpio-keys";
79
80 pinctrl-names = "default";
81 pinctrl-0 = <&button_pins>;
82
83 up-button {
84 label = "up";
85 linux,code = <KEY_UP>;
86 gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */
87 wakeup-source;
88 };
89
90 down-button {
91 label = "down";
92 linux,code = <KEY_DOWN>;
93 gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */
94 wakeup-source;
95 };
96
97 left-button {
98 label = "left";
99 linux,code = <KEY_LEFT>;
100 gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */
101 wakeup-source;
102 };
103
104 right-button {
105 label = "right";
106 linux,code = <KEY_RIGHT>;
107 gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */
108 wakeup-source;
109 };
110
111 pageup-button {
112 label = "game 1";
113 linux,code = <KEY_PAGEUP>;
114 gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */
115 wakeup-source;
116 };
117
118 pagedown-button {
119 label = "game 3";
120 linux,code = <KEY_PAGEDOWN>;
121 gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */
122 wakeup-source;
123 };
124
125 home-button {
126 label = "game 4";
127 linux,code = <KEY_HOME>;
128 gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */
129 wakeup-source;
130 };
131
132 end-button {
133 label = "game 2";
134 linux,code = <KEY_END>;
135 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */
136 wakeup-source;
137 };
138
139 right-shift {
140 label = "l";
141 linux,code = <KEY_RIGHTSHIFT>;
142 gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */
143 wakeup-source;
144 };
145
146 kp-plus {
147 label = "l2";
148 linux,code = <KEY_KPPLUS>;
149 gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */
150 wakeup-source;
151 };
152
153 right-ctrl {
154 label = "r";
155 linux,code = <KEY_RIGHTCTRL>;
156 gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */
157 wakeup-source;
158 };
159
160 kp-minus {
161 label = "r2";
162 linux,code = <KEY_KPMINUS>;
163 gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */
164 wakeup-source;
165 };
166
167 left-ctrl {
168 label = "ctrl";
169 linux,code = <KEY_LEFTCTRL>;
170 gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */
171 wakeup-source;
172 };
173
174 menu {
175 label = "menu";
176 linux,code = <KEY_MENU>;
177 gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */
178 wakeup-source;
179 };
180
181 hold {
182 label = "hold";
183 linux,code = <KEY_COFFEE>;
184 gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */
185 wakeup-source;
186 };
187
188 left-alt {
189 label = "alt";
190 linux,code = <KEY_LEFTALT>;
191 gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
192 wakeup-source;
193 };
194
195 lid {
196 label = "lid";
197 linux,code = <0x00>; /* SW_LID lid shut */
198 linux,input-type = <0x05>; /* EV_SW */
199 gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */
200 };
201 };
202
203 /* HS USB Host PHY on PORT 2 */
204 hsusb2_phy: hsusb2_phy {
205 compatible = "usb-nop-xceiv";
206 reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
207 vcc-supply = <&vaux2>;
208 #phy-cells = <0>;
209 };
210
211 /* HS USB Host VBUS supply
212 * disabling this regulator causes current leakage, and LCD flicker
213 * on earlier (CC) board revisions, so keep it always on */
214 usb_host_5v: fixed-regulator-usb_host_5v {
215 compatible = "regulator-fixed";
216 regulator-name = "usb_host_5v";
217 regulator-min-microvolt = <5000000>;
218 regulator-max-microvolt = <5000000>;
219 regulator-always-on;
220 regulator-boot-on;
221 enable-active-high;
222 gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
223 };
224
225 /* wg7210 (wifi+bt module) 32k clock buffer */
226 wg7210_32k: fixed-regulator-wg7210_32k {
227 compatible = "regulator-fixed";
228 regulator-name = "wg7210_32k";
229 regulator-min-microvolt = <1800000>;
230 regulator-max-microvolt = <1800000>;
231 regulator-always-on;
232 enable-active-high;
233 gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
234 };
235};
236
237&omap3_pmx_core {
238
239 mmc1_pins: pinmux_mmc1_pins {
240 pinctrl-single,pins = <
241 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
242 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
243 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
244 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
245 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
246 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
247 >;
248 };
249
250 mmc2_pins: pinmux_mmc2_pins {
251 pinctrl-single,pins = <
252 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
253 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
254 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
255 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
256 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
257 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
258 OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */
259 OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */
260 OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */
261 OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
262 >;
263 };
264
265 dss_dpi_pins: pinmux_dss_dpi_pins {
266 pinctrl-single,pins = <
267 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
268 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
269 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
270 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
271 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
272 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
273 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
274 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
275 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
276 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
277 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
278 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
279 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
280 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
281 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
282 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
283 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
284 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
285 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
286 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
287 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
288 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
289 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
290 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
291 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
292 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
293 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
294 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
295 OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */
296 >;
297 };
298
299 uart3_pins: pinmux_uart3_pins {
300 pinctrl-single,pins = <
301 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
302 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
303 >;
304 };
305
306 led_pins: pinmux_leds_pins {
307 pinctrl-single,pins = <
308 OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */
309 OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */
310 OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */
311 OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */
312 >;
313 };
314
315 button_pins: pinmux_button_pins {
316 pinctrl-single,pins = <
317 OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */
318 OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */
319 OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */
320 OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */
321 OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */
322 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */
323 OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */
324 OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */
325 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */
326 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */
327 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */
328 OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */
329 OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */
330 OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */
331 OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */
332 OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */
333 OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */
334 >;
335 };
336
337 penirq_pins: pinmux_penirq_pins {
338 pinctrl-single,pins = <
339 /* here we could enable to wakeup the cpu from suspend by a pen touch */
340 OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */
341 >;
342 };
343
344};
345
346&omap3_pmx_core2 {
347 /* define in CPU specific file that includes this one
348 * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD()
349 */
350};
351
352&i2c1 {
353 clock-frequency = <2600000>;
354
355 twl: twl@48 {
356 reg = <0x48>;
357 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
358 interrupt-parent = <&intc>;
359
360 twl_power: power {
361 compatible = "ti,twl4030-power-reset";
362 ti,use_poweroff;
363 };
364
365 twl_audio: audio {
366 compatible = "ti,twl4030-audio";
367
368 codec {
369 ti,ramp_delay_value = <3>;
370 };
371 };
372 };
373};
374
375#include "twl4030.dtsi"
376#include "twl4030_omap3.dtsi"
377
378&twl_keypad {
379 keypad,num-rows = <8>;
380 keypad,num-columns = <6>;
381 linux,keymap = <
382 MATRIX_KEY(0, 0, KEY_9)
383 MATRIX_KEY(0, 1, KEY_8)
384 MATRIX_KEY(0, 2, KEY_I)
385 MATRIX_KEY(0, 3, KEY_J)
386 MATRIX_KEY(0, 4, KEY_N)
387 MATRIX_KEY(0, 5, KEY_M)
388 MATRIX_KEY(1, 0, KEY_0)
389 MATRIX_KEY(1, 1, KEY_7)
390 MATRIX_KEY(1, 2, KEY_U)
391 MATRIX_KEY(1, 3, KEY_H)
392 MATRIX_KEY(1, 4, KEY_B)
393 MATRIX_KEY(1, 5, KEY_SPACE)
394 MATRIX_KEY(2, 0, KEY_BACKSPACE)
395 MATRIX_KEY(2, 1, KEY_6)
396 MATRIX_KEY(2, 2, KEY_Y)
397 MATRIX_KEY(2, 3, KEY_G)
398 MATRIX_KEY(2, 4, KEY_V)
399 MATRIX_KEY(2, 5, KEY_FN)
400 MATRIX_KEY(3, 0, KEY_O)
401 MATRIX_KEY(3, 1, KEY_5)
402 MATRIX_KEY(3, 2, KEY_T)
403 MATRIX_KEY(3, 3, KEY_F)
404 MATRIX_KEY(3, 4, KEY_C)
405 MATRIX_KEY(4, 0, KEY_P)
406 MATRIX_KEY(4, 1, KEY_4)
407 MATRIX_KEY(4, 2, KEY_R)
408 MATRIX_KEY(4, 3, KEY_D)
409 MATRIX_KEY(4, 4, KEY_X)
410 MATRIX_KEY(5, 0, KEY_K)
411 MATRIX_KEY(5, 1, KEY_3)
412 MATRIX_KEY(5, 2, KEY_E)
413 MATRIX_KEY(5, 3, KEY_S)
414 MATRIX_KEY(5, 4, KEY_Z)
415 MATRIX_KEY(6, 0, KEY_L)
416 MATRIX_KEY(6, 1, KEY_2)
417 MATRIX_KEY(6, 2, KEY_W)
418 MATRIX_KEY(6, 3, KEY_A)
419 MATRIX_KEY(6, 4, KEY_RIGHTBRACE)
420 MATRIX_KEY(7, 0, KEY_ENTER)
421 MATRIX_KEY(7, 1, KEY_1)
422 MATRIX_KEY(7, 2, KEY_Q)
423 MATRIX_KEY(7, 3, KEY_LEFTSHIFT)
424 MATRIX_KEY(7, 4, KEY_LEFTBRACE )
425 >;
426};
427
428/* backup battery charger */
429&charger {
430 ti,bb-uvolt = <3200000>;
431 ti,bb-uamp = <150>;
432};
433
434/* MMC2 */
435&vmmc2 {
436 regulator-min-microvolt = <1850000>;
437 regulator-max-microvolt = <3150000>;
438};
439
440/* LCD */
441&vaux1 {
442 regulator-min-microvolt = <3000000>;
443 regulator-max-microvolt = <3000000>;
444};
445
446/* USB Host PHY */
447&vaux2 {
448 regulator-min-microvolt = <1800000>;
449 regulator-max-microvolt = <1800000>;
450};
451
452/* available on expansion connector */
453&vaux3 {
454 regulator-min-microvolt = <2800000>;
455 regulator-max-microvolt = <2800000>;
456};
457
458/* ADS7846 and nubs */
459&vaux4 {
460 regulator-min-microvolt = <2800000>;
461 regulator-max-microvolt = <2800000>;
462};
463
464/* power audio DAC and LID sensor */
465&vsim {
466 regulator-min-microvolt = <2800000>;
467 regulator-max-microvolt = <2800000>;
468 regulator-always-on;
469};
470
471&i2c2 {
472 clock-frequency = <100000>;
473 /* no clients so we should disable clock */
474};
475
476&i2c3 {
477 clock-frequency = <100000>;
478
479 bq27500@55 {
480 compatible = "ti,bq27500";
481 reg = <0x55>;
482 };
483
484};
485
486&usb_otg_hs {
487 interface-type = <0>;
488 usb-phy = <&usb2_phy>;
489 phys = <&usb2_phy>;
490 phy-names = "usb2-phy";
491 mode = <3>;
492 power = <50>;
493};
494
495/*
496 * Many pandora boards have been produced with defective write-protect switches
497 * on either slot, so it was decided not to use this feature. If you know
498 * your board has good switches, feel free to uncomment wp-gpios below.
499 */
500&mmc1 {
501 pinctrl-names = "default";
502 pinctrl-0 = <&mmc1_pins>;
503 vmmc-supply = <&vmmc1>;
504 bus-width = <4>;
505 cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
506 /*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/ /* GPIO_126 */
507};
508
509&mmc2 {
510 pinctrl-names = "default";
511 pinctrl-0 = <&mmc2_pins>;
512 vmmc-supply = <&vmmc2>;
513 bus-width = <4>;
514 cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
515 /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */
516};
517
518/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
519&mmc3 {
520 status = "disabled";
521};
522
523/* bluetooth*/
524&uart1 {
525};
526
527/* spare (expansion connector) */
528&uart2 {
529};
530
531/* console (expansion connector) */
532&uart3 {
533 pinctrl-names = "default";
534 pinctrl-0 = <&uart3_pins>;
535 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
536};
537
538&usbhshost {
539 port2-mode = "ehci-phy";
540};
541
542&usbhsehci {
543 phys = <0 &hsusb2_phy>;
544};
545
546&gpmc {
547 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
548
549 nand@0,0 {
550 compatible = "ti,omap2-nand";
551 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
552 interrupt-parent = <&gpmc>;
553 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
554 <1 IRQ_TYPE_NONE>; /* termcount */
555 nand-bus-width = <16>;
556 ti,nand-ecc-opt = "sw";
557
558 gpmc,sync-clk-ps = <0>;
559 gpmc,cs-on-ns = <0>;
560 gpmc,cs-rd-off-ns = <44>;
561 gpmc,cs-wr-off-ns = <44>;
562 gpmc,adv-on-ns = <6>;
563 gpmc,adv-rd-off-ns = <34>;
564 gpmc,adv-wr-off-ns = <44>;
565 gpmc,we-off-ns = <40>;
566 gpmc,oe-off-ns = <54>;
567 gpmc,access-ns = <64>;
568 gpmc,rd-cycle-ns = <82>;
569 gpmc,wr-cycle-ns = <82>;
570 gpmc,wr-access-ns = <40>;
571 gpmc,wr-data-mux-bus-ns = <0>;
572 gpmc,device-width = <2>;
573
574 #address-cells = <1>;
575 #size-cells = <1>;
576
577 /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */
578
579 x-loader@0 {
580 label = "xloader";
581 reg = <0 0x80000>;
582 };
583
584 bootloaders@80000 {
585 label = "uboot";
586 reg = <0x80000 0x1e0000>;
587 };
588
589 bootloaders_env@260000 {
590 label = "uboot-env";
591 reg = <0x260000 0x20000>;
592 };
593
594 kernel@280000 {
595 label = "boot";
596 reg = <0x280000 0xa00000>;
597 };
598
599 filesystem@c80000 {
600 label = "rootfs";
601 reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */
602 };
603 };
604};
605
606&mcspi1 {
607 tsc2046@0 {
608 reg = <0>; /* CS0 */
609 compatible = "ti,tsc2046";
610 spi-max-frequency = <1000000>;
611 pinctrl-names = "default";
612 pinctrl-0 = <&penirq_pins>;
613 interrupt-parent = <&gpio3>;
614 interrupts = <30 0>; /* GPIO_94 */
615 pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
616 vcc-supply = <&vaux4>;
617
618 ti,x-min = /bits/ 16 <0>;
619 ti,x-max = /bits/ 16 <8000>;
620 ti,y-min = /bits/ 16 <0>;
621 ti,y-max = /bits/ 16 <4800>;
622 ti,x-plate-ohms = /bits/ 16 <40>;
623 ti,pressure-max = /bits/ 16 <255>;
624
625 wakeup-source;
626 };
627
628 lcd: lcd@1 {
629 reg = <1>; /* CS1 */
630 compatible = "tpo,td043mtea1";
631 spi-max-frequency = <100000>;
632 spi-cpol;
633 spi-cpha;
634
635 label = "lcd";
636 reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */
637 vcc-supply = <&vaux1>;
638
639 port {
640 lcd_in: endpoint {
641 remote-endpoint = <&dpi_out>;
642 };
643 };
644 };
645
646
647};
648
649/* n/a - used as GPIOs */
650&mcbsp1 {
651};
652
653/* audio DAC */
654&mcbsp2 {
655};
656
657/* bluetooth */
658&mcbsp3 {
659};
660
661/* to twl4030*/
662&mcbsp4 {
663};
664
665&venc {
666 status = "ok";
667
668 vdda-supply = <&vdac>;
669
670 port {
671 venc_out: endpoint {
672 remote-endpoint = <&tv_connector_in>;
673 ti,channels = <2>;
674 };
675 };
676};
677
678&dss {
679 pinctrl-names = "default";
680 pinctrl-0 = < &dss_dpi_pins >;
681
682 status = "ok";
683 vdds_dsi-supply = <&vpll2>;
684
685 port {
686 dpi_out: endpoint {
687 remote-endpoint = <&lcd_in>;
688 data-lines = <24>;
689 };
690 };
691};