1/*
  2 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
  3 *
  4 * The code contained herein is licensed under the GNU General Public
  5 * License. You may obtain a copy of the GNU General Public License
  6 * Version 2 or later at the following locations:
  7 *
  8 * http://www.opensource.org/licenses/gpl-license.html
  9 * http://www.gnu.org/copyleft/gpl.html
 10 */
 11
 12/dts-v1/;
 13#include "at91-sama5d4_ma5d4.dtsi"
 14
 15/ {
 16	model = "Aries/DENX MA5D4EVK";
 17	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
 18
 19	chosen {
 20		stdout-path = "serial3:115200n8";
 21	};
 22
 23	ahb {
 24		usb0: gadget@400000 {
 25			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 26			pinctrl-names = "default";
 27			pinctrl-0 = <&pinctrl_usba_vbus>;
 28			status = "okay";
 29		};
 30
 31		usb1: ohci@500000 {
 32			num-ports = <3>;
 33			atmel,vbus-gpio = <0
 34					   &pioE 11 GPIO_ACTIVE_LOW
 35					   &pioE 14 GPIO_ACTIVE_LOW
 36					  >;
 37			status = "okay";
 38		};
 39
 40		usb2: ehci@600000 {
 41			status = "okay";
 42		};
 43
 44		apb {
 45			hlcdc: hlcdc@f0000000 {
 46				status = "okay";
 47
 48				hlcdc-display-controller {
 49					pinctrl-names = "default";
 50					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
 51
 52					port@0 {
 53						hlcdc_panel_output: endpoint@0 {
 54							reg = <0>;
 55							remote-endpoint = <&panel_input>;
 56						};
 57					};
 58				};
 59
 60			};
 61
 62			macb0: ethernet@f8020000 {
 63				phy-mode = "rmii";
 64				status = "okay";
 65
 66				phy0: ethernet-phy@0 {
 67					reg = <0>;
 68				};
 69			};
 70
 71			usart0: serial@f802c000 {
 72				status = "okay";
 73			};
 74
 75			usart1: serial@f8030000 {
 76				status = "okay";
 77			};
 78
 79			mmc1: mmc@fc000000 {
 80				pinctrl-names = "default";
 81				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
 82				vmmc-supply = <&vcc_mmc1_reg>;
 83				vqmmc-supply = <&vcc_3v3_reg>;
 84				status = "okay";
 85				slot@0 {
 86					reg = <0>;
 87					bus-width = <4>;
 88					cd-gpios = <&pioE 5 0>;
 89				};
 90			};
 91
 92			adc0: adc@fc034000 {
 93				atmel,adc-ts-wires = <4>;
 94				atmel,adc-ts-pressure-threshold = <10000>;
 95			};
 96
 97
 98			pinctrl@fc06a000 {
 99				board {
100					pinctrl_mmc1_cd: mmc1_cd {
101						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
102					};
103					pinctrl_usba_vbus: usba_vbus {
104						atmel,pins =
105							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
106					};
107				};
108			};
109		};
110	};
111
112	backlight: backlight {
113		compatible = "pwm-backlight";
114		pwms = <&hlcdc_pwm 0 50000 0>;
115		brightness-levels = <0 4 8 16 32 64 128 255>;
116		default-brightness-level = <6>;
117		status = "okay";
118	};
119
120	leds {
121		compatible = "gpio-leds";
122		status = "okay";
123
124		user1 {
125			label = "user1";
126			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
127			linux,default-trigger = "heartbeat";
128		};
129
130		user2 {
131			label = "user2";
132			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
133			linux,default-trigger = "heartbeat";
134		};
135
136		user3 {
137			label = "user3";
138			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
139			linux,default-trigger = "heartbeat";
140		};
141	};
142
143	panel: panel {
144		/* Actually Ampire 800480R2 */
145		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
146		backlight = <&backlight>;
147		#address-cells = <1>;
148		#size-cells = <0>;
149		status = "okay";
150
151		port@0 {
152			#address-cells = <1>;
153			#size-cells = <0>;
154
155			panel_input: endpoint@0 {
156				reg = <0>;
157				remote-endpoint = <&hlcdc_panel_output>;
158			};
159		};
160	};
161
162	vcc_mmc1_reg: fixedregulator_mmc1 {
163		compatible = "regulator-fixed";
164		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
165		regulator-name = "VDD MCI1";
166		regulator-min-microvolt = <3300000>;
167		regulator-max-microvolt = <3300000>;
168		vin-supply = <&vcc_3v3_reg>;
169	};
170};