1# SPDX-License-Identifier: GPL-2.0
   2menu "Kernel hacking"
   3
   4source "lib/Kconfig.debug"
   5
   6config ARM_PTDUMP_CORE
   7	def_bool n
   8
   9config ARM_PTDUMP_DEBUGFS
  10	bool "Export kernel pagetable layout to userspace via debugfs"
  11	depends on DEBUG_KERNEL
  12	depends on MMU
  13	select ARM_PTDUMP_CORE
  14	select DEBUG_FS
  15	---help---
  16	  Say Y here if you want to show the kernel pagetable layout in a
  17	  debugfs file. This information is only useful for kernel developers
  18	  who are working in architecture specific areas of the kernel.
  19	  It is probably not a good idea to enable this feature in a production
  20	  kernel.
  21	  If in doubt, say "N"
  22
  23config DEBUG_WX
  24	bool "Warn on W+X mappings at boot"
  25	depends on MMU
  26	select ARM_PTDUMP_CORE
  27	---help---
  28		Generate a warning if any W+X mappings are found at boot.
  29
  30		This is useful for discovering cases where the kernel is leaving
  31		W+X mappings after applying NX, as such mappings are a security risk.
  32
  33		Look for a message in dmesg output like this:
  34
  35			arm/mm: Checked W+X mappings: passed, no W+X pages found.
  36
  37		or like this, if the check failed:
  38
  39			arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found.
  40
  41		Note that even if the check fails, your kernel is possibly
  42		still fine, as W+X mappings are not a security hole in
  43		themselves, what they do is that they make the exploitation
  44		of other unfixed kernel bugs easier.
  45
  46		There is no runtime or memory usage effect of this option
  47		once the kernel has booted up - it's a one time check.
  48
  49		If in doubt, say "Y".
  50
  51# RMK wants arm kernels compiled with frame pointers or stack unwinding.
  52# If you know what you are doing and are willing to live without stack
  53# traces, you can get a slightly smaller kernel by setting this option to
  54# n, but then RMK will have to kill you ;).
  55config FRAME_POINTER
  56	bool
 
 
 
 
 
  57	depends on !THUMB2_KERNEL
  58	default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
 
  59	help
  60	  If you say N here, the resulting kernel will be slightly smaller and
  61	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
  62	  when a problem occurs with the kernel, the information that is
  63	  reported is severely limited.
  64
  65config ARM_UNWIND
  66	bool "Enable stack unwinding support (EXPERIMENTAL)"
  67	depends on AEABI
  68	default y
  69	help
  70	  This option enables stack unwinding support in the kernel
  71	  using the information automatically generated by the
  72	  compiler. The resulting kernel image is slightly bigger but
  73	  the performance is not affected. Currently, this feature
  74	  only works with EABI compilers. If unsure say Y.
 
 
  75
  76config OLD_MCOUNT
  77	bool
  78	depends on FUNCTION_TRACER && FRAME_POINTER
  79	default y
 
 
 
 
 
 
 
 
 
  80
  81config DEBUG_USER
  82	bool "Verbose user fault messages"
  83	help
  84	  When a user program crashes due to an exception, the kernel can
  85	  print a brief message explaining what the problem was. This is
  86	  sometimes helpful for debugging but serves no purpose on a
  87	  production system. Most people should say N here.
  88
  89	  In addition, you need to pass user_debug=N on the kernel command
  90	  line to enable this feature.  N consists of the sum of:
  91
  92	      1 - undefined instruction events
  93	      2 - system calls
  94	      4 - invalid data aborts
  95	      8 - SIGSEGV faults
  96	     16 - SIGBUS faults
  97
  98# These options are only for real kernel hackers who want to get their hands dirty.
  99config DEBUG_LL
 100	bool "Kernel low-level debugging functions (read help!)"
 101	depends on DEBUG_KERNEL
 102	help
 103	  Say Y here to include definitions of printascii, printch, printhex
 104	  in the kernel.  This is helpful if you are debugging code that
 105	  executes before the console is initialized.
 106
 107	  Note that selecting this option will limit the kernel to a single
 108	  UART definition, as specified below. Attempting to boot the kernel
 109	  image on a different platform *will not work*, so this option should
 110	  not be enabled for kernels that are intended to be portable.
 111
 112choice
 113	prompt "Kernel low-level debugging port"
 114	depends on DEBUG_LL
 115
 116	config DEBUG_ALPINE_UART0
 117		bool "Kernel low-level debugging messages via Alpine UART0"
 118		depends on ARCH_ALPINE
 119		select DEBUG_UART_8250
 120		help
 121		  Say Y here if you want kernel low-level debugging support
 122		  on Alpine based platforms.
 123
 124	config DEBUG_ASM9260_UART
 125		bool "Kernel low-level debugging via asm9260 UART"
 126		depends on MACH_ASM9260
 127		help
 128		  Say Y here if you want the debug print routines to direct
 129		  their output to an UART or USART port on asm9260 based
 130		  machines.
 131
 132		    DEBUG_UART_PHYS | DEBUG_UART_VIRT
 133
 134		    0x80000000      | 0xf0000000     | UART0
 135		    0x80004000      | 0xf0004000     | UART1
 136		    0x80008000      | 0xf0008000     | UART2
 137		    0x8000c000      | 0xf000c000     | UART3
 138		    0x80010000      | 0xf0010000     | UART4
 139		    0x80014000      | 0xf0014000     | UART5
 140		    0x80018000      | 0xf0018000     | UART6
 141		    0x8001c000      | 0xf001c000     | UART7
 142		    0x80020000      | 0xf0020000     | UART8
 143		    0x80024000      | 0xf0024000     | UART9
 144
 145	config DEBUG_AT91_RM9200_DBGU
 146		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
 147		select DEBUG_AT91_UART
 148		depends on SOC_AT91RM9200 || SOC_AT91SAM9
 149		help
 150		  Say Y here if you want kernel low-level debugging support
 151		  on the DBGU port of:
 152		    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
 153		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
 154
 155	config DEBUG_AT91_SAM9263_DBGU
 156		bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
 157		select DEBUG_AT91_UART
 158		depends on SOC_AT91SAM9 || SOC_SAMA5D3
 159		help
 160		  Say Y here if you want kernel low-level debugging support
 161		  on the DBGU port of:
 162		    at91sam9263, at91sam9g45, at91sam9m10,
 163		    sama5d3
 164
 165	config DEBUG_AT91_SAMA5D2_UART1
 166		bool "Kernel low-level debugging on SAMA5D2 UART1"
 167		select DEBUG_AT91_UART
 168		depends on SOC_SAMA5D2
 169		help
 170		  Say Y here if you want kernel low-level debugging support
 171		  on the UART1 port of sama5d2.
 172
 173	config DEBUG_AT91_SAMA5D4_USART3
 174		bool "Kernel low-level debugging on SAMA5D4 USART3"
 175		select DEBUG_AT91_UART
 176		depends on SOC_SAMA5D4
 177		help
 178		  Say Y here if you want kernel low-level debugging support
 179		  on the USART3 port of sama5d4.
 180
 181	config DEBUG_AT91_SAMV7_USART1
 182		bool "Kernel low-level debugging via SAMV7 USART1"
 183		select DEBUG_AT91_UART
 184		depends on SOC_SAMV7
 185		help
 186		  Say Y here if you want the debug print routines to direct
 187		  their output to the USART1 port on SAMV7 based
 188		  machines.
 189
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 190	config DEBUG_BCM2835
 191		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 192		depends on ARCH_BCM2835 && ARCH_MULTI_V6
 193		select DEBUG_UART_PL01X
 194
 195	config DEBUG_BCM2836
 196		bool "Kernel low-level debugging on BCM2836 PL011 UART"
 197		depends on ARCH_BCM2835 && ARCH_MULTI_V7
 198		select DEBUG_UART_PL01X
 199
 200	config DEBUG_BCM_5301X
 201		bool "Kernel low-level debugging on BCM5301X/NSP UART1"
 202		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
 203		select DEBUG_UART_8250
 204
 205	config DEBUG_BCM_HR2
 206		bool "Kernel low-level debugging on Hurricane 2 UART2"
 207		depends on ARCH_BCM_HR2
 208		select DEBUG_UART_8250
 209
 
 
 
 
 
 
 
 
 210	config DEBUG_BCM_KONA_UART
 211		bool "Kernel low-level debugging messages via BCM KONA UART"
 212		depends on ARCH_BCM_MOBILE
 213		select DEBUG_UART_8250
 214		help
 215		  Say Y here if you want kernel low-level debugging support
 216		  on Broadcom SoC platforms.
 217		  This low level debug works for Broadcom
 218		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 219		  bcm11351, etc...)
 220
 221	config DEBUG_BCM63XX_UART
 222		bool "Kernel low-level debugging on BCM63XX UART"
 223		depends on ARCH_BCM_63XX
 224
 225	config DEBUG_BERLIN_UART
 226		bool "Marvell Berlin SoC Debug UART"
 227		depends on ARCH_BERLIN
 228		select DEBUG_UART_8250
 229		help
 230		  Say Y here if you want kernel low-level debugging support
 231		  on Marvell Berlin SoC based platforms.
 232
 233	config DEBUG_BRCMSTB_UART
 234		bool "Use BRCMSTB UART for low-level debug"
 235		depends on ARCH_BRCMSTB
 236		help
 237		  Say Y here if you want the debug print routines to direct
 238		  their output to the first serial port on these devices. The
 239		  UART physical and virtual address is automatically provided
 240		  based on the chip identification register value.
 241
 242		  If you have a Broadcom STB chip and would like early print
 243		  messages to appear over the UART, select this option.
 244
 245	config DEBUG_CLPS711X_UART1
 246		bool "Kernel low-level debugging messages via UART1"
 247		depends on ARCH_CLPS711X
 248		help
 249		  Say Y here if you want the debug print routines to direct
 250		  their output to the first serial port on these devices.
 251
 252	config DEBUG_CLPS711X_UART2
 253		bool "Kernel low-level debugging messages via UART2"
 254		depends on ARCH_CLPS711X
 255		help
 256		  Say Y here if you want the debug print routines to direct
 257		  their output to the second serial port on these devices.
 258
 259	config DEBUG_CNS3XXX
 260		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
 261		depends on ARCH_CNS3XXX
 262		select DEBUG_UART_8250
 263		help
 264		  Say Y here if you want the debug print routines to direct
 265                  their output to the CNS3xxx UART0.
 266
 267	config DEBUG_DAVINCI_DA8XX_UART1
 268		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 269		depends on ARCH_DAVINCI_DA8XX
 270		select DEBUG_UART_8250
 271		help
 272		  Say Y here if you want the debug print routines to direct
 273		  their output to UART1 serial port on DaVinci DA8XX devices.
 274
 275	config DEBUG_DAVINCI_DA8XX_UART2
 276		bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
 277		depends on ARCH_DAVINCI_DA8XX
 278		select DEBUG_UART_8250
 279		help
 280		  Say Y here if you want the debug print routines to direct
 281		  their output to UART2 serial port on DaVinci DA8XX devices.
 282
 283	config DEBUG_DAVINCI_DMx_UART0
 284		bool "Kernel low-level debugging on DaVinci DMx using UART0"
 285		depends on ARCH_DAVINCI_DMx
 286		select DEBUG_UART_8250
 287		help
 288		  Say Y here if you want the debug print routines to direct
 289		  their output to UART0 serial port on DaVinci DMx devices.
 290
 291	config DEBUG_DC21285_PORT
 292		bool "Kernel low-level debugging messages via footbridge serial port"
 293		depends on FOOTBRIDGE
 294		help
 295		  Say Y here if you want the debug print routines to direct
 296		  their output to the serial port in the DC21285 (Footbridge).
 297
 298	config DEBUG_DIGICOLOR_UA0
 299		bool "Kernel low-level debugging messages via Digicolor UA0"
 300		depends on ARCH_DIGICOLOR
 301		help
 302		  Say Y here if you want the debug print routines to direct
 303		  their output to the UA0 serial port in the CX92755.
 304
 305	config DEBUG_EP93XX
 306		bool "Kernel low-level debugging messages via ep93xx UART"
 307		depends on ARCH_EP93XX
 308		select DEBUG_UART_PL01X
 309		help
 310		  Say Y here if you want kernel low-level debugging support
 311		  on Cirrus Logic EP93xx based platforms.
 312
 313	config DEBUG_FOOTBRIDGE_COM1
 314		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
 315		depends on FOOTBRIDGE
 316		select DEBUG_UART_8250
 317		help
 318		  Say Y here if you want the debug print routines to direct
 319		  their output to the 8250 at PCI COM1.
 320
 321	config DEBUG_GEMINI
 322		bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
 323		depends on ARCH_GEMINI
 324		select DEBUG_UART_8250
 325		help
 326		  Say Y here if you want kernel low-level debugging support
 327		  on Cortina Gemini based platforms.
 328
 329	config DEBUG_HI3620_UART
 330		bool "Hisilicon HI3620 Debug UART"
 331		depends on ARCH_HI3xxx
 332		select DEBUG_UART_PL01X
 333		help
 334		  Say Y here if you want kernel low-level debugging support
 335		  on HI3620 UART.
 336
 337	config DEBUG_HIGHBANK_UART
 338		bool "Kernel low-level debugging messages via Highbank UART"
 339		depends on ARCH_HIGHBANK
 340		select DEBUG_UART_PL01X
 341		help
 342		  Say Y here if you want the debug print routines to direct
 343		  their output to the UART on Highbank based devices.
 344
 345	config DEBUG_HIP01_UART
 346		bool "Hisilicon Hip01 Debug UART"
 347		depends on ARCH_HIP01
 348		select DEBUG_UART_8250
 349		help
 350		  Say Y here if you want kernel low-level debugging support
 351		  on HIP01 UART.
 352
 353	config DEBUG_HIP04_UART
 354		bool "Hisilicon HiP04 Debug UART"
 355		depends on ARCH_HIP04
 356		select DEBUG_UART_8250
 357		help
 358		  Say Y here if you want kernel low-level debugging support
 359		  on HIP04 UART.
 360
 361	config DEBUG_HIX5HD2_UART
 362		bool "Hisilicon Hix5hd2 Debug UART"
 363		depends on ARCH_HIX5HD2
 364		select DEBUG_UART_PL01X
 365		help
 366		  Say Y here if you want kernel low-level debugging support
 367		  on Hix5hd2 UART.
 368
 369	config DEBUG_IMX1_UART
 370		bool "i.MX1 Debug UART"
 371		depends on SOC_IMX1
 372		help
 373		  Say Y here if you want kernel low-level debugging support
 374		  on i.MX1.
 375
 376	config DEBUG_IMX23_UART
 377		bool "i.MX23 Debug UART"
 378		depends on SOC_IMX23
 379		select DEBUG_UART_PL01X
 380		help
 381		  Say Y here if you want kernel low-level debugging support
 382		  on i.MX23.
 383
 384	config DEBUG_IMX25_UART
 385		bool "i.MX25 Debug UART"
 386		depends on SOC_IMX25
 387		help
 388		  Say Y here if you want kernel low-level debugging support
 389		  on i.MX25.
 390
 391	config DEBUG_IMX21_IMX27_UART
 392		bool "i.MX21 and i.MX27 Debug UART"
 393		depends on SOC_IMX21 || SOC_IMX27
 394		help
 395		  Say Y here if you want kernel low-level debugging support
 396		  on i.MX21 or i.MX27.
 397
 398	config DEBUG_IMX28_UART
 399		bool "i.MX28 Debug UART"
 400		depends on SOC_IMX28
 401		select DEBUG_UART_PL01X
 402		help
 403		  Say Y here if you want kernel low-level debugging support
 404		  on i.MX28.
 405
 406	config DEBUG_IMX31_UART
 407		bool "i.MX31 Debug UART"
 408		depends on SOC_IMX31
 409		help
 410		  Say Y here if you want kernel low-level debugging support
 411		  on i.MX31.
 412
 413	config DEBUG_IMX35_UART
 414		bool "i.MX35 Debug UART"
 415		depends on SOC_IMX35
 416		help
 417		  Say Y here if you want kernel low-level debugging support
 418		  on i.MX35.
 419
 420	config DEBUG_IMX50_UART
 421		bool "i.MX50 Debug UART"
 422		depends on SOC_IMX50
 423		help
 424		  Say Y here if you want kernel low-level debugging support
 425		  on i.MX50.
 426
 427	config DEBUG_IMX51_UART
 428		bool "i.MX51 Debug UART"
 429		depends on SOC_IMX51
 430		help
 431		  Say Y here if you want kernel low-level debugging support
 432		  on i.MX51.
 433
 434	config DEBUG_IMX53_UART
 435		bool "i.MX53 Debug UART"
 436		depends on SOC_IMX53
 437		help
 438		  Say Y here if you want kernel low-level debugging support
 439		  on i.MX53.
 440
 441	config DEBUG_IMX6Q_UART
 442		bool "i.MX6Q/DL Debug UART"
 443		depends on SOC_IMX6Q
 444		help
 445		  Say Y here if you want kernel low-level debugging support
 446		  on i.MX6Q/DL.
 447
 448	config DEBUG_IMX6SL_UART
 449		bool "i.MX6SL Debug UART"
 450		depends on SOC_IMX6SL
 451		help
 452		  Say Y here if you want kernel low-level debugging support
 453		  on i.MX6SL.
 454
 455	config DEBUG_IMX6SX_UART
 456		bool "i.MX6SX Debug UART"
 457		depends on SOC_IMX6SX
 458		help
 459		  Say Y here if you want kernel low-level debugging support
 460		  on i.MX6SX.
 461
 462	config DEBUG_IMX6UL_UART
 463		bool "i.MX6UL Debug UART"
 464		depends on SOC_IMX6UL
 465		help
 466		  Say Y here if you want kernel low-level debugging support
 467		  on i.MX6UL.
 468
 469	config DEBUG_IMX7D_UART
 470		bool "i.MX7D Debug UART"
 471		depends on SOC_IMX7D
 472		help
 473		  Say Y here if you want kernel low-level debugging support
 474		  on i.MX7D.
 475
 476	config DEBUG_INTEGRATOR
 477		bool "Kernel low-level debugging messages via ARM Integrator UART"
 478		depends on ARCH_INTEGRATOR
 479		select DEBUG_UART_PL01X
 480		help
 481		  Say Y here if you want kernel low-level debugging support
 482		  on ARM Integrator platforms.
 483
 484	config DEBUG_KEYSTONE_UART0
 485		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 486		depends on ARCH_KEYSTONE
 487		select DEBUG_UART_8250
 488		help
 489		  Say Y here if you want the debug print routines to direct
 490		  their output to UART0 serial port on KEYSTONE2 devices.
 491
 492	config DEBUG_KEYSTONE_UART1
 493		bool "Kernel low-level debugging on KEYSTONE2 using UART1"
 494		depends on ARCH_KEYSTONE
 495		select DEBUG_UART_8250
 496		help
 497		  Say Y here if you want the debug print routines to direct
 498		  their output to UART1 serial port on KEYSTONE2 devices.
 499
 500	config DEBUG_KS8695_UART
 501		bool "KS8695 Debug UART"
 502		depends on ARCH_KS8695
 503		help
 504		  Say Y here if you want kernel low-level debugging support
 505		  on KS8695.
 506
 507	config DEBUG_LPC18XX_UART0
 508		bool "Kernel low-level debugging via LPC18xx/43xx UART0"
 509		depends on ARCH_LPC18XX
 510		select DEBUG_UART_8250
 511		help
 512		  Say Y here if you want kernel low-level debugging support
 513		  on NXP LPC18xx/43xx UART0.
 514
 515	config DEBUG_LPC32XX
 516		bool "Kernel low-level debugging messages via NXP LPC32xx UART"
 517		depends on ARCH_LPC32XX
 518		select DEBUG_UART_8250
 519		help
 520		  Say Y here if you want kernel low-level debugging support
 521		  on NXP LPC32xx based platforms.
 522
 523	config DEBUG_MESON_UARTAO
 524		bool "Kernel low-level debugging via Meson6 UARTAO"
 525		depends on ARCH_MESON
 526		help
 527		  Say Y here if you want kernel low-lever debugging support
 528		  on Amlogic Meson6 based platforms on the UARTAO.
 529
 530	config DEBUG_MMP_UART2
 531		bool "Kernel low-level debugging message via MMP UART2"
 532		depends on ARCH_MMP
 533		select DEBUG_UART_8250
 534		help
 535		  Say Y here if you want kernel low-level debugging support
 536		  on MMP UART2.
 537
 538	config DEBUG_MMP_UART3
 539		bool "Kernel low-level debugging message via MMP UART3"
 540		depends on ARCH_MMP
 541		select DEBUG_UART_8250
 542		help
 543		  Say Y here if you want kernel low-level debugging support
 544		  on MMP UART3.
 545
 546	config DEBUG_MVEBU_UART0
 547		bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
 548		depends on ARCH_MVEBU
 549		depends on ARCH_MVEBU && CPU_V7
 550		select DEBUG_UART_8250
 551		help
 552		  Say Y here if you want kernel low-level debugging support
 553		  on MVEBU based platforms on UART0.
 554
 555		  This option should be used with the old bootloaders
 556		  that left the internal registers mapped at
 557		  0xd0000000. As of today, this is the case on
 558		  platforms such as the Globalscale Mirabox or the
 559		  Plathome OpenBlocks AX3, when using the original
 560		  bootloader.
 561
 562		  This option will not work on older Marvell platforms
 563		  (Kirkwood, Dove, MV78xx0, Orion5x), which should pick
 564		  the "new bootloader" variant.
 565
 566		  If the wrong DEBUG_MVEBU_UART* option is selected,
 567		  when u-boot hands over to the kernel, the system
 568		  silently crashes, with no serial output at all.
 569
 570	config DEBUG_MVEBU_UART0_ALTERNATE
 571		bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
 572		depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X
 573		select DEBUG_UART_8250
 574		help
 575		  Say Y here if you want kernel low-level debugging support
 576		  on MVEBU based platforms on UART0. (Armada XP, Armada 3xx,
 577		  Kirkwood, Dove, MV78xx0, Orion5x).
 578
 579
 580		  This option should be used with the new bootloaders
 581		  that remap the internal registers at 0xf1000000.
 582
 583		  If the wrong DEBUG_MVEBU_UART* option is selected,
 584		  when u-boot hands over to the kernel, the system
 585		  silently crashes, with no serial output at all.
 586
 587	config DEBUG_MVEBU_UART1_ALTERNATE
 588		bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)"
 589		depends on ARCH_MVEBU
 590		select DEBUG_UART_8250
 591		help
 592		  Say Y here if you want kernel low-level debugging support
 593		  on MVEBU based platforms on UART1. (Armada XP, Armada 3xx,
 594		  Kirkwood, Dove, MV78xx0, Orion5x).
 595
 596		  This option should be used with the new bootloaders
 597		  that remap the internal registers at 0xf1000000.
 598		  All of the older (pre Armada XP/370) platforms also use
 599		  this address, regardless of the boot loader version.
 600
 601		  If the wrong DEBUG_MVEBU_UART* option is selected,
 602		  when u-boot hands over to the kernel, the system
 603		  silently crashes, with no serial output at all.
 604
 
 
 
 
 
 
 
 
 605	config DEBUG_MT6589_UART0
 606		bool "Mediatek mt6589 UART0"
 607		depends on ARCH_MEDIATEK
 608		select DEBUG_UART_8250
 609		help
 610		  Say Y here if you want kernel low-level debugging support
 611		  for Mediatek mt6589 based platforms on UART0.
 612
 613	config DEBUG_MT8127_UART0
 614		bool "Mediatek mt8127/mt6592 UART0"
 615		depends on ARCH_MEDIATEK
 616		select DEBUG_UART_8250
 617		help
 618		  Say Y here if you want kernel low-level debugging support
 619		  for Mediatek mt8127 based platforms on UART0.
 620
 621	config DEBUG_MT8135_UART3
 622		bool "Mediatek mt8135 UART3"
 623		depends on ARCH_MEDIATEK
 624		select DEBUG_UART_8250
 625		help
 626		  Say Y here if you want kernel low-level debugging support
 627		  for Mediatek mt8135 based platforms on UART3.
 628
 629	config DEBUG_NETX_UART
 630		bool "Kernel low-level debugging messages via NetX UART"
 631		depends on ARCH_NETX
 632		help
 633		  Say Y here if you want kernel low-level debugging support
 634		  on Hilscher NetX based platforms.
 635
 636	config DEBUG_NOMADIK_UART
 637		bool "Kernel low-level debugging messages via NOMADIK UART"
 638		depends on ARCH_NOMADIK
 639		select DEBUG_UART_PL01X
 640		help
 641		  Say Y here if you want kernel low-level debugging support
 642		  on NOMADIK based platforms.
 643
 644	config DEBUG_NSPIRE_CLASSIC_UART
 645		bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
 646		depends on ARCH_NSPIRE
 647		select DEBUG_UART_8250
 648		help
 649		  Say Y here if you want kernel low-level debugging support
 650		  on TI-NSPIRE classic models.
 651
 652	config DEBUG_NSPIRE_CX_UART
 653		bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
 654		depends on ARCH_NSPIRE
 655		select DEBUG_UART_PL01X
 656		help
 657		  Say Y here if you want kernel low-level debugging support
 658		  on TI-NSPIRE CX models.
 659
 660	config DEBUG_OMAP1UART1
 661		bool "Kernel low-level debugging via OMAP1 UART1"
 662		depends on ARCH_OMAP1
 663		select DEBUG_UART_8250
 664		help
 665		  Say Y here if you want kernel low-level debugging support
 666		  on OMAP1 based platforms (except OMAP730) on the UART1.
 667
 668	config DEBUG_OMAP1UART2
 669		bool "Kernel low-level debugging via OMAP1 UART2"
 670		depends on ARCH_OMAP1
 671		select DEBUG_UART_8250
 672		help
 673		  Say Y here if you want kernel low-level debugging support
 674		  on OMAP1 based platforms (except OMAP730) on the UART2.
 675
 676	config DEBUG_OMAP1UART3
 677		bool "Kernel low-level debugging via OMAP1 UART3"
 678		depends on ARCH_OMAP1
 679		select DEBUG_UART_8250
 680		help
 681		  Say Y here if you want kernel low-level debugging support
 682		  on OMAP1 based platforms (except OMAP730) on the UART3.
 683
 684	config DEBUG_OMAP2UART1
 685		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
 686		depends on ARCH_OMAP2PLUS
 687		select DEBUG_UART_8250
 688		help
 689		  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
 690		  omap3 torpedo and 3530 lv som.
 691
 692	config DEBUG_OMAP2UART2
 693		bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
 694		depends on ARCH_OMAP2PLUS
 695		select DEBUG_UART_8250
 696
 697	config DEBUG_OMAP2UART3
 698		bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
 699		depends on ARCH_OMAP2PLUS
 700		select DEBUG_UART_8250
 701
 702	config DEBUG_OMAP3UART3
 703		bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
 704		depends on ARCH_OMAP2PLUS
 705		select DEBUG_UART_8250
 706		help
 707		  This covers at least cm_t3x, beagle, crane, devkit8000,
 708		  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
 709		  and 3517evm.
 710
 711	config DEBUG_OMAP4UART3
 712		bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
 713		depends on ARCH_OMAP2PLUS
 714		select DEBUG_UART_8250
 715
 716	config DEBUG_OMAP3UART4
 717		bool "Kernel low-level debugging messages via OMAP36XX UART4"
 718		depends on ARCH_OMAP2PLUS
 719		select DEBUG_UART_8250
 720
 721	config DEBUG_OMAP4UART4
 722		bool "Kernel low-level debugging messages via OMAP4/5 UART4"
 723		depends on ARCH_OMAP2PLUS
 724		select DEBUG_UART_8250
 725
 726	config DEBUG_OMAP7XXUART1
 727		bool "Kernel low-level debugging via OMAP730 UART1"
 728		depends on ARCH_OMAP730
 729		select DEBUG_UART_8250
 730		help
 731		  Say Y here if you want kernel low-level debugging support
 732		  on OMAP730 based platforms on the UART1.
 733
 734	config DEBUG_OMAP7XXUART2
 735		bool "Kernel low-level debugging via OMAP730 UART2"
 736		depends on ARCH_OMAP730
 737		select DEBUG_UART_8250
 738		help
 739		  Say Y here if you want kernel low-level debugging support
 740		  on OMAP730 based platforms on the UART2.
 741
 742	config DEBUG_OMAP7XXUART3
 743		bool "Kernel low-level debugging via OMAP730 UART3"
 744		depends on ARCH_OMAP730
 745		select DEBUG_UART_8250
 746		help
 747		  Say Y here if you want kernel low-level debugging support
 748		  on OMAP730 based platforms on the UART3.
 749
 750	config DEBUG_TI81XXUART1
 751		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 752		depends on ARCH_OMAP2PLUS
 753		select DEBUG_UART_8250
 754
 755	config DEBUG_TI81XXUART2
 756		bool "Kernel low-level debugging messages via TI81XX UART2"
 757		depends on ARCH_OMAP2PLUS
 758		select DEBUG_UART_8250
 759
 760	config DEBUG_TI81XXUART3
 761		bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
 762		depends on ARCH_OMAP2PLUS
 763		select DEBUG_UART_8250
 764
 765	config DEBUG_AM33XXUART1
 766		bool "Kernel low-level debugging messages via AM33XX UART1"
 767		depends on ARCH_OMAP2PLUS
 768		select DEBUG_UART_8250
 769
 770	config DEBUG_ZOOM_UART
 771		bool "Kernel low-level debugging messages via Zoom2/3 UART"
 772		depends on ARCH_OMAP2PLUS
 773		select DEBUG_OMAP2PLUS_UART
 774
 775	config DEBUG_PICOXCELL_UART
 776		depends on ARCH_PICOXCELL
 777		bool "Use PicoXcell UART for low-level debug"
 778		select DEBUG_UART_8250
 779		help
 780		  Say Y here if you want kernel low-level debugging support
 781		  on PicoXcell based platforms.
 782
 783	config DEBUG_PXA_UART1
 784		depends on ARCH_PXA
 785		bool "Use PXA UART1 for low-level debug"
 786		select DEBUG_UART_8250
 787		help
 788		  Say Y here if you want kernel low-level debugging support
 789		  on PXA UART1.
 790
 791	config DEBUG_QCOM_UARTDM
 792		bool "Kernel low-level debugging messages via QCOM UARTDM"
 793		depends on ARCH_QCOM
 794		help
 795		  Say Y here if you want the debug print routines to direct
 796		  their output to the serial port on Qualcomm devices.
 797
 798		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
 799		  APQ8064   0x16640000        0xf0040000
 800		  APQ8084   0xf995e000        0xfa75e000
 801		  IPQ4019   0x078af000        0xf78af000
 802		  MSM8X60   0x19c40000        0xf0040000
 803		  MSM8960   0x16440000        0xf0040000
 804		  MSM8974   0xf991e000        0xfa71e000
 805
 806		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
 807		  options based on your needs.
 808
 809	config DEBUG_REALVIEW_STD_PORT
 810		bool "RealView Default UART"
 811		depends on ARCH_REALVIEW
 812		select DEBUG_UART_PL01X
 813		help
 814		  Say Y here if you want the debug print routines to direct
 815		  their output to the serial port on RealView EB, PB11MP, PBA8
 816		  and PBX platforms.
 817
 818	config DEBUG_REALVIEW_PB1176_PORT
 819		bool "RealView PB1176 UART"
 820		depends on MACH_REALVIEW_PB1176
 821		select DEBUG_UART_PL01X
 822		help
 823		  Say Y here if you want the debug print routines to direct
 824		  their output to the standard serial port on the RealView
 825		  PB1176 platform.
 826
 827	config DEBUG_RV1108_UART0
 828		bool "Kernel low-level debugging messages via Rockchip RV1108 UART0"
 829		depends on ARCH_ROCKCHIP
 830		select DEBUG_UART_8250
 831		help
 832		  Say Y here if you want kernel low-level debugging support
 833                  on Rockchip RV1108 based platforms.
 834
 835	config DEBUG_RV1108_UART1
 836		bool "Kernel low-level debugging messages via Rockchip RV1108 UART1"
 837		depends on ARCH_ROCKCHIP
 838		select DEBUG_UART_8250
 839		help
 840		  Say Y here if you want kernel low-level debugging support
 841		  on Rockchip RV1108 based platforms.
 842
 843	config DEBUG_RV1108_UART2
 844		bool "Kernel low-level debugging messages via Rockchip RV1108 UART2"
 845		depends on ARCH_ROCKCHIP
 846		select DEBUG_UART_8250
 847		help
 848		  Say Y here if you want kernel low-level debugging support
 849		  on Rockchip RV1108 based platforms.
 850
 851	config DEBUG_RK29_UART0
 852		bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
 853		depends on ARCH_ROCKCHIP
 854		select DEBUG_UART_8250
 855		help
 856		  Say Y here if you want kernel low-level debugging support
 857		  on Rockchip based platforms.
 858
 859	config DEBUG_RK29_UART1
 860		bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
 861		depends on ARCH_ROCKCHIP
 862		select DEBUG_UART_8250
 863		help
 864		  Say Y here if you want kernel low-level debugging support
 865		  on Rockchip based platforms.
 866
 867	config DEBUG_RK29_UART2
 868		bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
 869		depends on ARCH_ROCKCHIP
 870		select DEBUG_UART_8250
 871		help
 872		  Say Y here if you want kernel low-level debugging support
 873		  on Rockchip based platforms.
 874
 875	config DEBUG_RK3X_UART0
 876		bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0"
 877		depends on ARCH_ROCKCHIP
 878		select DEBUG_UART_8250
 879		help
 880		  Say Y here if you want kernel low-level debugging support
 881		  on Rockchip based platforms.
 882
 883	config DEBUG_RK3X_UART1
 884		bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1"
 885		depends on ARCH_ROCKCHIP
 886		select DEBUG_UART_8250
 887		help
 888		  Say Y here if you want kernel low-level debugging support
 889		  on Rockchip based platforms.
 890
 891	config DEBUG_RK3X_UART2
 892		bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2"
 893		depends on ARCH_ROCKCHIP
 894		select DEBUG_UART_8250
 895		help
 896		  Say Y here if you want kernel low-level debugging support
 897		  on Rockchip based platforms.
 898
 899	config DEBUG_RK3X_UART3
 900		bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3"
 901		depends on ARCH_ROCKCHIP
 902		select DEBUG_UART_8250
 903		help
 904		  Say Y here if you want kernel low-level debugging support
 905		  on Rockchip based platforms.
 906
 907	config DEBUG_RK32_UART2
 908		bool "Kernel low-level debugging messages via Rockchip RK32 UART2"
 909		depends on ARCH_ROCKCHIP
 910		select DEBUG_UART_8250
 911		help
 912		  Say Y here if you want kernel low-level debugging support
 913		  on Rockchip RK32xx based platforms.
 914
 915	config DEBUG_R7S72100_SCIF2
 916		bool "Kernel low-level debugging messages via SCIF2 on R7S72100"
 917		depends on ARCH_R7S72100
 918		help
 919		  Say Y here if you want kernel low-level debugging support
 920		  via SCIF2 on Renesas RZ/A1H (R7S72100).
 921
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 922	config DEBUG_RCAR_GEN1_SCIF0
 923		bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
 924		depends on ARCH_R8A7778
 925		help
 926		  Say Y here if you want kernel low-level debugging support
 927		  via SCIF0 on Renesas R-Car M1A (R8A7778).
 928
 929	config DEBUG_RCAR_GEN1_SCIF2
 930		bool "Kernel low-level debugging messages via SCIF2 on R8A7779"
 931		depends on ARCH_R8A7779
 932		help
 933		  Say Y here if you want kernel low-level debugging support
 934		  via SCIF2 on Renesas R-Car H1 (R8A7779).
 935
 936	config DEBUG_RCAR_GEN2_SCIF0
 937		bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
 938		depends on ARCH_R8A7743 || ARCH_R8A7790 || ARCH_R8A7791 || \
 939			ARCH_R8A7792 || ARCH_R8A7793
 940		help
 941		  Say Y here if you want kernel low-level debugging support
 942		  via SCIF0 on Renesas RZ/G1M (R8A7743), R-Car H2 (R8A7790),
 943		  M2-W (R8A7791), V2H (R8A7792), or M2-N (R8A7793).
 
 
 
 
 
 
 
 
 944
 945	config DEBUG_RCAR_GEN2_SCIF2
 946		bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
 947		depends on ARCH_R8A7794
 948		help
 949		  Say Y here if you want kernel low-level debugging support
 950		  via SCIF2 on Renesas R-Car E2 (R8A7794).
 951
 952	config DEBUG_RCAR_GEN2_SCIF4
 953		bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
 954		depends on ARCH_R8A7745
 955		help
 956		  Say Y here if you want kernel low-level debugging support
 957		  via SCIF4 on Renesas RZ/G1E (R8A7745).
 958
 
 
 
 
 
 
 
 959	config DEBUG_RMOBILE_SCIFA0
 960		bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
 961		depends on ARCH_R8A73A4
 962		help
 963		  Say Y here if you want kernel low-level debugging support
 964		  via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4).
 965
 966	config DEBUG_RMOBILE_SCIFA1
 967		bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
 968		depends on ARCH_R8A7740
 969		help
 970		  Say Y here if you want kernel low-level debugging support
 971		  via SCIFA1 on Renesas R-Mobile A1 (R8A7740).
 972
 973	config DEBUG_RMOBILE_SCIFA4
 974		bool "Kernel low-level debugging messages via SCIFA4 on SH73A0"
 975		depends on ARCH_SH73A0
 976		help
 977		  Say Y here if you want kernel low-level debugging support
 978		  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
 979
 980	config DEBUG_S3C_UART0
 981		depends on PLAT_SAMSUNG
 982		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 983		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 984		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 985		select DEBUG_S5PV210_UART if ARCH_S5PV210
 986		bool "Use Samsung S3C UART 0 for low-level debug"
 987		help
 988		  Say Y here if you want the debug print routines to direct
 989		  their output to UART 0. The port must have been initialised
 990		  by the boot-loader before use.
 991
 992	config DEBUG_S3C_UART1
 993		depends on PLAT_SAMSUNG
 994		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 995		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 996		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 997		select DEBUG_S5PV210_UART if ARCH_S5PV210
 998		bool "Use Samsung S3C UART 1 for low-level debug"
 999		help
1000		  Say Y here if you want the debug print routines to direct
1001		  their output to UART 1. The port must have been initialised
1002		  by the boot-loader before use.
1003
1004	config DEBUG_S3C_UART2
1005		depends on PLAT_SAMSUNG
1006		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
1007		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
1008		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
1009		select DEBUG_S5PV210_UART if ARCH_S5PV210
1010		bool "Use Samsung S3C UART 2 for low-level debug"
1011		help
1012		  Say Y here if you want the debug print routines to direct
1013		  their output to UART 2. The port must have been initialised
1014		  by the boot-loader before use.
1015
1016	config DEBUG_S3C_UART3
1017		depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
1018		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
1019		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
1020		select DEBUG_S5PV210_UART if ARCH_S5PV210
1021		bool "Use Samsung S3C UART 3 for low-level debug"
1022		help
1023		  Say Y here if you want the debug print routines to direct
1024		  their output to UART 3. The port must have been initialised
1025		  by the boot-loader before use.
1026
1027	config DEBUG_S3C2410_UART0
1028		depends on ARCH_S3C24XX
1029		select DEBUG_S3C2410_UART
1030		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
1031		help
1032		  Say Y here if you want the debug print routines to direct
1033		  their output to UART 0. The port must have been initialised
1034		  by the boot-loader before use.
1035
1036	config DEBUG_S3C2410_UART1
1037		depends on ARCH_S3C24XX
1038		select DEBUG_S3C2410_UART
1039		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
1040		help
1041		  Say Y here if you want the debug print routines to direct
1042		  their output to UART 1. The port must have been initialised
1043		  by the boot-loader before use.
1044
1045	config DEBUG_S3C2410_UART2
1046		depends on ARCH_S3C24XX
1047		select DEBUG_S3C2410_UART
1048		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
1049		help
1050		  Say Y here if you want the debug print routines to direct
1051		  their output to UART 2. The port must have been initialised
1052		  by the boot-loader before use.
1053
1054	config DEBUG_SA1100
1055		depends on ARCH_SA1100
1056		bool "Use SA1100 UARTs for low-level debug"
1057		help
1058		  Say Y here if you want kernel low-level debugging support
1059		  on SA-11x0 UART ports. The kernel will check for the first
1060		  enabled UART in a sequence 3-1-2.
1061
 
 
 
 
 
 
 
 
1062	config DEBUG_SOCFPGA_UART0
1063		depends on ARCH_SOCFPGA
1064		bool "Use SOCFPGA UART0 for low-level debug"
1065		select DEBUG_UART_8250
1066		help
1067		  Say Y here if you want kernel low-level debugging support
1068		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
1069
1070	config DEBUG_SOCFPGA_UART1
1071		depends on ARCH_SOCFPGA
1072		bool "Use SOCFPGA UART1 for low-level debug"
1073		select DEBUG_UART_8250
1074		help
1075		  Say Y here if you want kernel low-level debugging support
1076		  on SOCFPGA(Arria 10) based platforms.
1077
 
 
 
 
 
 
 
1078
1079	config DEBUG_SUN9I_UART0
1080		bool "Kernel low-level debugging messages via sun9i UART0"
1081		depends on MACH_SUN9I
1082		select DEBUG_UART_8250
1083		help
1084		  Say Y here if you want kernel low-level debugging support
1085		  on Allwinner A80 based platforms on the UART0.
1086
1087	config DEBUG_SUNXI_UART0
1088		bool "Kernel low-level debugging messages via sunXi UART0"
1089		depends on ARCH_SUNXI
1090		select DEBUG_UART_8250
1091		help
1092		  Say Y here if you want kernel low-level debugging support
1093		  on Allwinner A1X based platforms on the UART0.
1094
1095	config DEBUG_SUNXI_UART1
1096		bool "Kernel low-level debugging messages via sunXi UART1"
1097		depends on ARCH_SUNXI
1098		select DEBUG_UART_8250
1099		help
1100		  Say Y here if you want kernel low-level debugging support
1101		  on Allwinner A1X based platforms on the UART1.
1102
1103	config DEBUG_SUNXI_R_UART
1104		bool "Kernel low-level debugging messages via sunXi R_UART"
1105		depends on MACH_SUN6I || MACH_SUN8I
1106		select DEBUG_UART_8250
1107		help
1108		  Say Y here if you want kernel low-level debugging support
1109		  on Allwinner A31/A23 based platforms on the R_UART.
1110
1111	config DEBUG_SIRFPRIMA2_UART1
1112		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
1113		depends on ARCH_PRIMA2
1114		select DEBUG_SIRFSOC_UART
1115		help
1116		  Say Y here if you want the debug print routines to direct
1117		  their output to the uart1 port on SiRFprimaII devices.
1118
1119	config DEBUG_SIRFATLAS7_UART0
1120		bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
1121		depends on ARCH_ATLAS7
1122		select DEBUG_SIRFSOC_UART
1123		help
1124		  Say Y here if you want the debug print routines to direct
1125		  their output to the uart0 port on SiRFATLAS7 devices.The uart0
1126		  is used on SiRFATLAS7 as a extra debug port.sometimes an extra
1127		  debug port can be very useful.
1128
1129	config DEBUG_SIRFATLAS7_UART1
1130		bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
1131		depends on ARCH_ATLAS7
1132		select DEBUG_SIRFSOC_UART
1133		help
1134		  Say Y here if you want the debug print routines to direct
1135		  their output to the uart1 port on SiRFATLAS7 devices.
1136
1137	config DEBUG_SPEAR3XX
1138		bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
1139		depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
1140		select DEBUG_UART_PL01X
1141		help
1142		  Say Y here if you want kernel low-level debugging support
1143		  on ST SPEAr based platforms.
1144
1145	config DEBUG_SPEAR13XX
1146		bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
1147		depends on ARCH_SPEAR13XX
1148		select DEBUG_UART_PL01X
1149		help
1150		  Say Y here if you want kernel low-level debugging support
1151		  on ST SPEAr13xx based platforms.
1152
1153	config STIH41X_DEBUG_ASC2
1154		bool "Use StiH415/416 ASC2 UART for low-level debug"
1155		depends on ARCH_STI
1156		select DEBUG_STI_UART
1157		help
1158		  Say Y here if you want kernel low-level debugging support
1159		  on STiH415/416 based platforms like b2000, which has
1160		  default UART wired up to ASC2.
1161
1162		  If unsure, say N.
1163
1164	config STIH41X_DEBUG_SBC_ASC1
1165		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
1166		depends on ARCH_STI
1167		select DEBUG_STI_UART
1168		help
1169		  Say Y here if you want kernel low-level debugging support
1170		  on STiH415/416 based platforms like b2020. which has
1171		  default UART wired up to SBC ASC1.
1172
1173		  If unsure, say N.
1174
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1175	config TEGRA_DEBUG_UART_AUTO_ODMDATA
1176		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
1177		depends on ARCH_TEGRA
1178		select DEBUG_TEGRA_UART
1179		help
1180		  Automatically determines which UART to use for low-level
1181		  debug based on the ODMDATA value. This value is part of
1182		  the BCT, and is written to the boot memory device using
1183		  nvflash, or other flashing tool.  When bits 19:18 are 3,
1184		  then bits 17:15 indicate which UART to use; 0/1/2/3/4
1185		  are UART A/B/C/D/E.
1186
1187	config TEGRA_DEBUG_UARTA
1188		bool "Kernel low-level debugging messages via Tegra UART A"
1189		depends on ARCH_TEGRA
1190		select DEBUG_TEGRA_UART
1191		help
1192		  Say Y here if you want kernel low-level debugging support
1193		  on Tegra based platforms.
1194
1195	config TEGRA_DEBUG_UARTB
1196		bool "Kernel low-level debugging messages via Tegra UART B"
1197		depends on ARCH_TEGRA
1198		select DEBUG_TEGRA_UART
1199		help
1200		  Say Y here if you want kernel low-level debugging support
1201		  on Tegra based platforms.
1202
1203	config TEGRA_DEBUG_UARTC
1204		bool "Kernel low-level debugging messages via Tegra UART C"
1205		depends on ARCH_TEGRA
1206		select DEBUG_TEGRA_UART
1207		help
1208		  Say Y here if you want kernel low-level debugging support
1209		  on Tegra based platforms.
1210
1211	config TEGRA_DEBUG_UARTD
1212		bool "Kernel low-level debugging messages via Tegra UART D"
1213		depends on ARCH_TEGRA
1214		select DEBUG_TEGRA_UART
1215		help
1216		  Say Y here if you want kernel low-level debugging support
1217		  on Tegra based platforms.
1218
1219	config TEGRA_DEBUG_UARTE
1220		bool "Kernel low-level debugging messages via Tegra UART E"
1221		depends on ARCH_TEGRA
1222		select DEBUG_TEGRA_UART
1223		help
1224		  Say Y here if you want kernel low-level debugging support
1225		  on Tegra based platforms.
1226
1227	config DEBUG_U300_UART
1228		bool "Kernel low-level debugging messages via U300 UART0"
1229		depends on ARCH_U300
1230		select DEBUG_UART_PL01X
1231		help
1232		  Say Y here if you want the debug print routines to direct
1233		  their output to the uart port on U300 devices.
1234
1235	config DEBUG_UX500_UART
1236		depends on ARCH_U8500
1237		bool "Use Ux500 UART for low-level debug"
1238		help
1239		  Say Y here if you want kernel low-level debugging support
1240		  on Ux500 based platforms.
1241
1242	config DEBUG_VERSATILE
1243		bool "Kernel low-level debugging messages via ARM Versatile UART"
1244		depends on ARCH_VERSATILE
1245		select DEBUG_UART_PL01X
1246		help
1247		  Say Y here if you want kernel low-level debugging support
1248		  on ARM Versatile platforms.
1249
1250	config DEBUG_VEXPRESS_UART0_DETECT
1251		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
1252		depends on ARCH_VEXPRESS && CPU_CP15_MMU
1253		help
1254		  This option enables a simple heuristic which tries to determine
1255		  the motherboard's memory map variant (original or RS1) and then
1256		  choose the relevant UART0 base address.
1257
1258		  Note that this will only work with standard A-class core tiles,
1259		  and may fail with non-standard SMM or custom software models.
1260
1261	config DEBUG_VEXPRESS_UART0_CA9
1262		bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
1263		depends on ARCH_VEXPRESS
1264		select DEBUG_UART_PL01X
1265		help
1266		  This option selects UART0 at 0x10009000. Except for custom models,
1267		  this applies only to the V2P-CA9 tile.
1268
1269	config DEBUG_VEXPRESS_UART0_RS1
1270		bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
1271		depends on ARCH_VEXPRESS
1272		select DEBUG_UART_PL01X
1273		help
1274		  This option selects UART0 at 0x1c090000. This applies to most
1275		  of the tiles using the RS1 memory map, including all new A-class
1276		  core tiles, FPGA-based SMMs and software models.
1277
1278	config DEBUG_VEXPRESS_UART0_CRX
1279		bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)"
1280		depends on ARCH_VEXPRESS && !MMU
1281		select DEBUG_UART_PL01X
1282		help
1283		  This option selects UART0 at 0xb0090000. This is appropriate for
1284		  Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
1285
1286	config DEBUG_VF_UART
1287		bool "Vybrid UART"
1288		depends on SOC_VF610
1289		help
1290		  Say Y here if you want kernel low-level debugging support
1291		  on Vybrid based platforms.
1292
1293	config DEBUG_VT8500_UART0
1294		bool "Use UART0 on VIA/Wondermedia SoCs"
1295		depends on ARCH_VT8500
1296		help
1297		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
1298		  devices, including VT8500, WM8505, WM8650 and WM8850.
1299
1300	config DEBUG_ZTE_ZX
1301		bool "Use ZTE ZX UART"
1302		select DEBUG_UART_PL01X
1303		depends on ARCH_ZX
1304		help
1305		  Say Y here if you are enabling ZTE ZX296702 SOC and need
1306		  debug uart support.
1307
1308		  This option is preferred over the platform specific
1309		  options; the platform specific options are deprecated
1310		  and will be soon removed.
1311
1312	config DEBUG_ZYNQ_UART0
1313		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
1314		depends on ARCH_ZYNQ
1315		help
1316		  Say Y here if you want the debug print routines to direct
1317		  their output to UART0 on the Zynq platform.
1318
1319	config DEBUG_ZYNQ_UART1
1320		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
1321		depends on ARCH_ZYNQ
1322		help
1323		  Say Y here if you want the debug print routines to direct
1324		  their output to UART1 on the Zynq platform.
1325
1326		  If you have a ZC702 board and want early boot messages to
1327		  appear on the USB serial adaptor, select this option.
1328
1329	config DEBUG_ICEDCC
1330		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
1331		help
1332		  Say Y here if you want the debug print routines to direct
1333		  their output to the EmbeddedICE macrocell's DCC channel using
1334		  co-processor 14. This is known to work on the ARM9 style ICE
1335		  channel and on the XScale with the PEEDI.
1336
1337		  Note that the system will appear to hang during boot if there
1338		  is nothing connected to read from the DCC.
1339
1340	config DEBUG_SEMIHOSTING
1341		bool "Kernel low-level debug output via semihosting I/O"
1342		help
1343		  Semihosting enables code running on an ARM target to use
1344		  the I/O facilities on a host debugger/emulator through a
1345		  simple SVC call. The host debugger or emulator must have
1346		  semihosting enabled for the special svc call to be trapped
1347		  otherwise the kernel will crash.
1348
1349		  This is known to work with OpenOCD, as well as
1350		  ARM's Fast Models, or any other controlling environment
1351		  that implements semihosting.
1352
1353		  For more details about semihosting, please see
1354		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
1355
1356	config DEBUG_LL_UART_8250
1357		bool "Kernel low-level debugging via 8250 UART"
1358		help
1359		  Say Y here if you wish the debug print routes to direct
1360		  their output to an 8250 UART.  You can use this option
1361		  to provide the parameters for the 8250 UART rather than
1362		  selecting one of the platform specific options above if
1363		  you know the parameters for the port.
1364
1365		  This option is preferred over the platform specific
1366		  options; the platform specific options are deprecated
1367		  and will be soon removed.
1368
1369	config DEBUG_LL_UART_EFM32
1370		bool "Kernel low-level debugging via efm32 UART"
1371		depends on ARCH_EFM32
1372		help
1373		  Say Y here if you want the debug print routines to direct
1374		  their output to an UART or USART port on efm32 based
1375		  machines. Use the following addresses for DEBUG_UART_PHYS:
1376
1377		    0x4000c000 | USART0
1378		    0x4000c400 | USART1
1379		    0x4000c800 | USART2
1380		    0x4000e000 | UART0
1381		    0x4000e400 | UART1
1382
1383	config DEBUG_LL_UART_PL01X
1384		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
1385		help
1386		  Say Y here if you wish the debug print routes to direct
1387		  their output to a PL01x Primecell UART.  You can use
1388		  this option to provide the parameters for the UART
1389		  rather than selecting one of the platform specific
1390		  options above if you know the parameters for the port.
1391
1392		  This option is preferred over the platform specific
1393		  options; the platform specific options are deprecated
1394		  and will be soon removed.
1395
1396endchoice
1397
1398config DEBUG_AT91_UART
1399	bool
1400	depends on ARCH_AT91
1401
1402config DEBUG_EXYNOS_UART
1403	bool
1404
1405config DEBUG_S3C2410_UART
1406	bool
1407	select DEBUG_S3C24XX_UART
1408
1409config DEBUG_S3C24XX_UART
1410	bool
1411
1412config DEBUG_S3C64XX_UART
1413	bool
1414
1415config DEBUG_S5PV210_UART
1416	bool
1417
 
 
 
 
 
 
 
 
 
1418config DEBUG_OMAP2PLUS_UART
1419	bool
1420	depends on ARCH_OMAP2PLUS
1421
1422config DEBUG_IMX_UART_PORT
1423	int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
1424						DEBUG_IMX25_UART || \
1425						DEBUG_IMX21_IMX27_UART || \
1426						DEBUG_IMX31_UART || \
1427						DEBUG_IMX35_UART || \
1428						DEBUG_IMX50_UART || \
1429						DEBUG_IMX51_UART || \
1430						DEBUG_IMX53_UART || \
1431						DEBUG_IMX6Q_UART || \
1432						DEBUG_IMX6SL_UART || \
1433						DEBUG_IMX6SX_UART || \
1434						DEBUG_IMX6UL_UART || \
1435						DEBUG_IMX7D_UART
 
1436	default 1
1437	depends on ARCH_MXC
1438	help
1439	  Choose UART port on which kernel low-level debug messages
1440	  should be output.
1441
1442config DEBUG_VF_UART_PORT
1443	int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
1444	default 1
1445	range 0 3
1446	depends on SOC_VF610
1447	help
1448	  Choose UART port on which kernel low-level debug messages
1449	  should be output.
1450
1451config DEBUG_TEGRA_UART
1452	bool
1453	depends on ARCH_TEGRA
1454
1455config DEBUG_STI_UART
1456	bool
1457	depends on ARCH_STI
1458
1459config DEBUG_SIRFSOC_UART
1460	bool
1461	depends on ARCH_SIRF
 
 
 
 
 
 
 
1462
1463config DEBUG_LL_INCLUDE
1464	string
1465	default "debug/sa1100.S" if DEBUG_SA1100
1466	default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP
1467	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
1468	default "debug/at91.S" if DEBUG_AT91_UART
1469	default "debug/asm9260.S" if DEBUG_ASM9260_UART
1470	default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
1471	default "debug/dc21285.S" if DEBUG_DC21285_PORT
1472	default "debug/meson.S" if DEBUG_MESON_UARTAO
1473	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
1474	default "debug/exynos.S" if DEBUG_EXYNOS_UART
1475	default "debug/efm32.S" if DEBUG_LL_UART_EFM32
1476	default "debug/icedcc.S" if DEBUG_ICEDCC
1477	default "debug/imx.S" if DEBUG_IMX1_UART || \
1478				 DEBUG_IMX25_UART || \
1479				 DEBUG_IMX21_IMX27_UART || \
1480				 DEBUG_IMX31_UART || \
1481				 DEBUG_IMX35_UART || \
1482				 DEBUG_IMX50_UART || \
1483				 DEBUG_IMX51_UART || \
1484				 DEBUG_IMX53_UART ||\
1485				 DEBUG_IMX6Q_UART || \
1486				 DEBUG_IMX6SL_UART || \
1487				 DEBUG_IMX6SX_UART || \
1488				 DEBUG_IMX6UL_UART || \
1489				 DEBUG_IMX7D_UART
1490	default "debug/ks8695.S" if DEBUG_KS8695_UART
1491	default "debug/msm.S" if DEBUG_QCOM_UARTDM
1492	default "debug/netx.S" if DEBUG_NETX_UART
1493	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
1494	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
 
 
1495	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
1496	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
1497	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
 
1498	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
1499	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
 
1500	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
1501	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
1502	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
1503	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
1504	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
1505	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
1506	default "debug/sti.S" if DEBUG_STI_UART
 
 
1507	default "debug/tegra.S" if DEBUG_TEGRA_UART
1508	default "debug/ux500.S" if DEBUG_UX500_UART
1509	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
1510	default "debug/vf.S" if DEBUG_VF_UART
1511	default "debug/vt8500.S" if DEBUG_VT8500_UART0
1512	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
1513	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
1514	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
1515	default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
1516	default "mach/debug-macro.S"
1517
1518# Compatibility options for PL01x
1519config DEBUG_UART_PL01X
1520	bool
1521
1522# Compatibility options for 8250
1523config DEBUG_UART_8250
1524	def_bool ARCH_EBSA110 || \
1525		ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
1526		ARCH_RPC
1527
1528config DEBUG_UART_PHYS
1529	hex "Physical base address of debug UART"
1530	default 0x00100a00 if DEBUG_NETX_UART
1531	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
1532	default 0x01c28000 if DEBUG_SUNXI_UART0
1533	default 0x01c28400 if DEBUG_SUNXI_UART1
1534	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
1535	default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
1536	default 0x01f02800 if DEBUG_SUNXI_R_UART
1537	default 0x02530c00 if DEBUG_KEYSTONE_UART0
1538	default 0x02531000 if DEBUG_KEYSTONE_UART1
1539	default 0x03010fe0 if ARCH_RPC
1540	default 0x07000000 if DEBUG_SUN9I_UART0
1541	default 0x09405000 if DEBUG_ZTE_ZX
1542	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
1543				DEBUG_VEXPRESS_UART0_CA9
1544	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
1545	default 0x10124000 if DEBUG_RK3X_UART0
1546	default 0x10126000 if DEBUG_RK3X_UART1
1547	default 0x101f1000 if DEBUG_VERSATILE
1548	default 0x101fb000 if DEBUG_NOMADIK_UART
1549	default 0x10210000 if DEBUG_RV1108_UART2
1550	default 0x10220000 if DEBUG_RV1108_UART1
1551	default 0x10230000 if DEBUG_RV1108_UART0
1552	default 0x11002000 if DEBUG_MT8127_UART0
1553	default 0x11006000 if DEBUG_MT6589_UART0
1554	default 0x11009000 if DEBUG_MT8135_UART3
1555	default 0x16000000 if DEBUG_INTEGRATOR
 
1556	default 0x18000300 if DEBUG_BCM_5301X
1557	default 0x18000400 if DEBUG_BCM_HR2
1558	default 0x18010000 if DEBUG_SIRFATLAS7_UART0
1559	default 0x18020000 if DEBUG_SIRFATLAS7_UART1
1560	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
 
1561	default 0x20001000 if DEBUG_HIP01_UART
1562	default 0x20060000 if DEBUG_RK29_UART0
1563	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
1564	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
1565	default 0x20201000 if DEBUG_BCM2835
1566	default 0x3f201000 if DEBUG_BCM2836
1567	default 0x3e000000 if DEBUG_BCM_KONA_UART
1568	default 0x4000e400 if DEBUG_LL_UART_EFM32
 
 
 
1569	default 0x40028000 if DEBUG_AT91_SAMV7_USART1
1570	default 0x40081000 if DEBUG_LPC18XX_UART0
1571	default 0x40090000 if DEBUG_LPC32XX
1572	default 0x40100000 if DEBUG_PXA_UART1
1573	default 0x42000000 if DEBUG_GEMINI
1574	default 0x44e09000 if DEBUG_AM33XXUART1
1575	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
1576	default 0x48022000 if DEBUG_TI81XXUART2
1577	default 0x48024000 if DEBUG_TI81XXUART3
1578	default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
1579				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
1580	default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
1581				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
1582	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
1583	default 0x49020000 if DEBUG_OMAP3UART3
1584	default 0x49042000 if DEBUG_OMAP3UART4
1585	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
1586				DEBUG_S3C2410_UART0)
1587	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
1588				DEBUG_S3C2410_UART1)
1589	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
1590				DEBUG_S3C2410_UART2)
1591	default 0x78000000 if DEBUG_CNS3XXX
1592	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
1593	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
1594	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
1595	default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
1596	default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
1597	default 0x80010000 if DEBUG_ASM9260_UART
1598	default 0x80070000 if DEBUG_IMX23_UART
1599	default 0x80074000 if DEBUG_IMX28_UART
1600	default 0x80230000 if DEBUG_PICOXCELL_UART
1601	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
1602	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
1603	default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
1604	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
1605	default 0xc0013000 if DEBUG_U300_UART
1606	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
1607	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
1608	default 0xd0000000 if DEBUG_SPEAR3XX
1609	default 0xd0012000 if DEBUG_MVEBU_UART0
1610	default 0xc81004c0 if DEBUG_MESON_UARTAO
1611	default 0xd4017000 if DEBUG_MMP_UART2
1612	default 0xd4018000 if DEBUG_MMP_UART3
1613	default 0xe0000000 if DEBUG_SPEAR13XX
 
 
1614	default 0xe4007000 if DEBUG_HIP04_UART
1615	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
1616	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
 
1617	default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
1618	default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
1619	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
 
1620	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
1621	default 0xe8008000 if DEBUG_R7S72100_SCIF2
1622	default 0xf0000be0 if ARCH_EBSA110
 
1623	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
1624	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
1625	default 0xf7fc9000 if DEBUG_BERLIN_UART
1626	default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
1627	default 0xf8b00000 if DEBUG_HIX5HD2_UART
1628	default 0xf991e000 if DEBUG_QCOM_UARTDM
1629	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
1630	default 0xfcb00000 if DEBUG_HI3620_UART
1631	default 0xfd883000 if DEBUG_ALPINE_UART0
1632	default 0xfe800000 if ARCH_IOP32X
 
1633	default 0xff690000 if DEBUG_RK32_UART2
1634	default 0xffc02000 if DEBUG_SOCFPGA_UART0
1635	default 0xffc02100 if DEBUG_SOCFPGA_UART1
1636	default 0xffd82340 if ARCH_IOP13XX
1637	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
1638	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
1639	default 0xfff36000 if DEBUG_HIGHBANK_UART
1640	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
1641	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
1642	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
1643	default 0xfffe8600 if DEBUG_BCM63XX_UART
1644	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
1645	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
1646	default 0xfffff700 if ARCH_IOP33X
1647	depends on ARCH_EP93XX || \
1648	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
1649		DEBUG_LL_UART_EFM32 || \
1650		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
1651		DEBUG_NETX_UART || \
1652		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
 
1653		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
1654		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
1655		DEBUG_RCAR_GEN2_SCIF4 || \
 
1656		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
1657		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
1658		DEBUG_S3C64XX_UART || \
1659		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
1660		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
1661		DEBUG_AT91_UART
 
 
1662
1663config DEBUG_UART_VIRT
1664	hex "Virtual base address of debug UART"
1665	default 0xc881f000 if DEBUG_RV1108_UART2
1666	default 0xc8821000 if DEBUG_RV1108_UART1
1667	default 0xc8912000 if DEBUG_RV1108_UART0
1668	default 0xe0000a00 if DEBUG_NETX_UART
1669	default 0xe0010fe0 if ARCH_RPC
1670	default 0xf0000be0 if ARCH_EBSA110
1671	default 0xf0010000 if DEBUG_ASM9260_UART
 
1672	default 0xf01fb000 if DEBUG_NOMADIK_UART
1673	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
 
1674	default 0xf1000300 if DEBUG_BCM_5301X
1675	default 0xf1000400 if DEBUG_BCM_HR2
1676	default 0xf1002000 if DEBUG_MT8127_UART0
1677	default 0xf1006000 if DEBUG_MT6589_UART0
1678	default 0xf1009000 if DEBUG_MT8135_UART3
 
1679	default 0xf11f1000 if DEBUG_VERSATILE
1680	default 0xf1600000 if DEBUG_INTEGRATOR
1681	default 0xf1c28000 if DEBUG_SUNXI_UART0
1682	default 0xf1c28400 if DEBUG_SUNXI_UART1
1683	default 0xf1f02800 if DEBUG_SUNXI_R_UART
1684	default 0xf31004c0 if DEBUG_MESON_UARTAO
1685	default 0xf4090000 if DEBUG_LPC32XX
1686	default 0xf4200000 if DEBUG_GEMINI
1687	default 0xf6200000 if DEBUG_PXA_UART1
1688	default 0xf7000000 if DEBUG_SUN9I_UART0
1689	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
1690	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
1691				DEBUG_S3C2410_UART0)
1692	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
1693	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
1694	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
1695	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
1696				DEBUG_S3C2410_UART1)
1697	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
1698				DEBUG_S3C2410_UART2)
1699	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
1700	default 0xf7fc9000 if DEBUG_BERLIN_UART
1701	default 0xf8007000 if DEBUG_HIP04_UART
1702	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
1703	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
1704	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
1705	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
 
1706	default 0xf9e09000 if DEBUG_AM33XXUART1
1707	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
1708	default 0xfa022000 if DEBUG_TI81XXUART2
1709	default 0xfa024000 if DEBUG_TI81XXUART3
1710	default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
1711				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
1712	default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
1713				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
1714	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
1715	default 0xfa71e000 if DEBUG_QCOM_UARTDM
1716	default 0xfb002000 if DEBUG_CNS3XXX
1717	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
1718	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
1719	default 0xfb020000 if DEBUG_OMAP3UART3
1720	default 0xfb042000 if DEBUG_OMAP3UART4
1721	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
1722	default 0xfc705000 if DEBUG_ZTE_ZX
1723	default 0xfcfe8600 if DEBUG_BCM63XX_UART
1724	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
1725	default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0
 
1726	default 0xfd883000 if DEBUG_ALPINE_UART0
1727	default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE
1728	default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X
1729	default 0xfe017000 if DEBUG_MMP_UART2
1730	default 0xfe018000 if DEBUG_MMP_UART3
1731	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
1732	default 0xfe230000 if DEBUG_PICOXCELL_UART
1733	default 0xfe300000 if DEBUG_BCM_KONA_UART
1734	default 0xfe800000 if ARCH_IOP32X
1735	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
1736	default 0xfeb24000 if DEBUG_RK3X_UART0
1737	default 0xfeb26000 if DEBUG_RK3X_UART1
1738	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
1739	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
1740	default 0xfec02000 if DEBUG_SOCFPGA_UART0
1741	default 0xfec02100 if DEBUG_SOCFPGA_UART1
1742	default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU
 
1743	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
1744	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
1745	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
1746	default 0xfec20000 if DEBUG_SIRFATLAS7_UART1
1747	default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
1748	default 0xfec90000 if DEBUG_RK32_UART2
1749	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
1750	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
1751	default 0xfed60000 if DEBUG_RK29_UART0
1752	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
1753	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
1754	default 0xfedc0000 if DEBUG_EP93XX
1755	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
1756	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
1757	default 0xfee82340 if ARCH_IOP13XX
1758	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
1759	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
1760	default 0xfef36000 if DEBUG_HIGHBANK_UART
1761	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
1762	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
1763	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
1764	default 0xfefff700 if ARCH_IOP33X
1765	default 0xff003000 if DEBUG_U300_UART
1766	default 0xffd01000 if DEBUG_HIP01_UART
1767	default DEBUG_UART_PHYS if !MMU
1768	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
1769		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
1770		DEBUG_NETX_UART || \
1771		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
1772		DEBUG_S3C64XX_UART || \
1773		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
1774		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
1775		DEBUG_AT91_UART
 
 
1776
1777config DEBUG_UART_8250_SHIFT
1778	int "Register offset shift for the 8250 debug UART"
1779	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1780	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
1781		DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
1782		DEBUG_OMAP7XXUART3
1783	default 2
1784
1785config DEBUG_UART_8250_WORD
1786	bool "Use 32-bit accesses for 8250 UART"
1787	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1788	depends on DEBUG_UART_8250_SHIFT >= 2
1789	default y if DEBUG_PICOXCELL_UART || \
1790		DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \
1791		DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \
1792		DEBUG_ALPINE_UART0 || \
1793		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
1794		DEBUG_DAVINCI_DA8XX_UART2 || \
1795		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
1796
1797config DEBUG_UART_8250_PALMCHIP
1798	bool "8250 UART is Palmchip BK-310x"
1799	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1800	help
1801	  Palmchip provides a UART implementation compatible with 16550
1802	  except for having a different register layout.  Say Y here if
1803	  the debug UART is of this type.
1804
1805config DEBUG_UART_8250_FLOW_CONTROL
1806	bool "Enable flow control for 8250 UART"
1807	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
1808	default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
1809
1810config DEBUG_UNCOMPRESS
1811	bool "Enable decompressor debugging via DEBUG_LL output"
1812	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
 
1813	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
1814		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
1815		     !DEBUG_BRCMSTB_UART
1816	help
1817	  This option influences the normal decompressor output for
1818	  multiplatform kernels.  Normally, multiplatform kernels disable
1819	  decompressor output because it is not possible to know where to
1820	  send the decompressor output.
1821
1822	  When this option is set, the selected DEBUG_LL output method
1823	  will be re-used for normal decompressor output on multiplatform
1824	  kernels.
1825	  
1826
1827config UNCOMPRESS_INCLUDE
1828	string
1829	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
1830					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
1831	default "mach/uncompress.h"
1832
1833config EARLY_PRINTK
1834	bool "Early printk"
1835	depends on DEBUG_LL
1836	help
1837	  Say Y here if you want to have an early console using the
1838	  kernel low-level debugging functions. Add earlyprintk to your
1839	  kernel parameters to enable this console.
1840
1841config ARM_KPROBES_TEST
1842	tristate "Kprobes test module"
1843	depends on KPROBES && MODULES
1844	help
1845	  Perform tests of kprobes API and instruction set simulation.
1846
1847config PID_IN_CONTEXTIDR
1848	bool "Write the current PID to the CONTEXTIDR register"
1849	depends on CPU_COPY_V6
1850	help
1851	  Enabling this option causes the kernel to write the current PID to
1852	  the PROCID field of the CONTEXTIDR register, at the expense of some
1853	  additional instructions during context switch. Say Y here only if you
1854	  are planning to use hardware trace tools with this kernel.
1855
1856source "drivers/hwtracing/coresight/Kconfig"
1857
1858endmenu