Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Intel Multiprocessor Specification 1.1 and 1.4
4 * compliant MP-table parsing routines.
5 *
6 * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
7 * (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
8 * (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
9 */
10
11#include <linux/mm.h>
12#include <linux/init.h>
13#include <linux/delay.h>
14#include <linux/bootmem.h>
15#include <linux/memblock.h>
16#include <linux/kernel_stat.h>
17#include <linux/mc146818rtc.h>
18#include <linux/bitops.h>
19#include <linux/acpi.h>
20#include <linux/smp.h>
21#include <linux/pci.h>
22
23#include <asm/irqdomain.h>
24#include <asm/mtrr.h>
25#include <asm/mpspec.h>
26#include <asm/pgalloc.h>
27#include <asm/io_apic.h>
28#include <asm/proto.h>
29#include <asm/bios_ebda.h>
30#include <asm/e820/api.h>
31#include <asm/setup.h>
32#include <asm/smp.h>
33
34#include <asm/apic.h>
35/*
36 * Checksum an MP configuration block.
37 */
38
39static int __init mpf_checksum(unsigned char *mp, int len)
40{
41 int sum = 0;
42
43 while (len--)
44 sum += *mp++;
45
46 return sum & 0xFF;
47}
48
49int __init default_mpc_apic_id(struct mpc_cpu *m)
50{
51 return m->apicid;
52}
53
54static void __init MP_processor_info(struct mpc_cpu *m)
55{
56 int apicid;
57 char *bootup_cpu = "";
58
59 if (!(m->cpuflag & CPU_ENABLED)) {
60 disabled_cpus++;
61 return;
62 }
63
64 apicid = x86_init.mpparse.mpc_apic_id(m);
65
66 if (m->cpuflag & CPU_BOOTPROCESSOR) {
67 bootup_cpu = " (Bootup-CPU)";
68 boot_cpu_physical_apicid = m->apicid;
69 }
70
71 pr_info("Processor #%d%s\n", m->apicid, bootup_cpu);
72 generic_processor_info(apicid, m->apicver);
73}
74
75#ifdef CONFIG_X86_IO_APIC
76void __init default_mpc_oem_bus_info(struct mpc_bus *m, char *str)
77{
78 memcpy(str, m->bustype, 6);
79 str[6] = 0;
80 apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str);
81}
82
83static void __init MP_bus_info(struct mpc_bus *m)
84{
85 char str[7];
86
87 x86_init.mpparse.mpc_oem_bus_info(m, str);
88
89#if MAX_MP_BUSSES < 256
90 if (m->busid >= MAX_MP_BUSSES) {
91 pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n",
92 m->busid, str, MAX_MP_BUSSES - 1);
93 return;
94 }
95#endif
96
97 set_bit(m->busid, mp_bus_not_pci);
98 if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
99#ifdef CONFIG_EISA
100 mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
101#endif
102 } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
103 if (x86_init.mpparse.mpc_oem_pci_bus)
104 x86_init.mpparse.mpc_oem_pci_bus(m);
105
106 clear_bit(m->busid, mp_bus_not_pci);
107#ifdef CONFIG_EISA
108 mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
109 } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
110 mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
111#endif
112 } else
113 pr_warn("Unknown bustype %s - ignoring\n", str);
114}
115
116static void __init MP_ioapic_info(struct mpc_ioapic *m)
117{
118 struct ioapic_domain_cfg cfg = {
119 .type = IOAPIC_DOMAIN_LEGACY,
120 .ops = &mp_ioapic_irqdomain_ops,
121 };
122
123 if (m->flags & MPC_APIC_USABLE)
124 mp_register_ioapic(m->apicid, m->apicaddr, gsi_top, &cfg);
125}
126
127static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
128{
129 apic_printk(APIC_VERBOSE,
130 "Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
131 mp_irq->irqtype, mp_irq->irqflag & 3,
132 (mp_irq->irqflag >> 2) & 3, mp_irq->srcbus,
133 mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
134}
135
136#else /* CONFIG_X86_IO_APIC */
137static inline void __init MP_bus_info(struct mpc_bus *m) {}
138static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {}
139#endif /* CONFIG_X86_IO_APIC */
140
141static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
142{
143 apic_printk(APIC_VERBOSE,
144 "Lint: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC LINT %02x\n",
145 m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbusid,
146 m->srcbusirq, m->destapic, m->destapiclint);
147}
148
149/*
150 * Read/parse the MPC
151 */
152static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str)
153{
154
155 if (memcmp(mpc->signature, MPC_SIGNATURE, 4)) {
156 pr_err("MPTABLE: bad signature [%c%c%c%c]!\n",
157 mpc->signature[0], mpc->signature[1],
158 mpc->signature[2], mpc->signature[3]);
159 return 0;
160 }
161 if (mpf_checksum((unsigned char *)mpc, mpc->length)) {
162 pr_err("MPTABLE: checksum error!\n");
163 return 0;
164 }
165 if (mpc->spec != 0x01 && mpc->spec != 0x04) {
166 pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec);
167 return 0;
168 }
169 if (!mpc->lapic) {
170 pr_err("MPTABLE: null local APIC address!\n");
171 return 0;
172 }
173 memcpy(oem, mpc->oem, 8);
174 oem[8] = 0;
175 pr_info("MPTABLE: OEM ID: %s\n", oem);
176
177 memcpy(str, mpc->productid, 12);
178 str[12] = 0;
179
180 pr_info("MPTABLE: Product ID: %s\n", str);
181
182 pr_info("MPTABLE: APIC at: 0x%X\n", mpc->lapic);
183
184 return 1;
185}
186
187static void skip_entry(unsigned char **ptr, int *count, int size)
188{
189 *ptr += size;
190 *count += size;
191}
192
193static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
194{
195 pr_err("Your mptable is wrong, contact your HW vendor!\n");
196 pr_cont("type %x\n", *mpt);
197 print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16,
198 1, mpc, mpc->length, 1);
199}
200
201void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { }
202
203static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
204{
205 char str[16];
206 char oem[10];
207
208 int count = sizeof(*mpc);
209 unsigned char *mpt = ((unsigned char *)mpc) + count;
210
211 if (!smp_check_mpc(mpc, oem, str))
212 return 0;
213
214 /* Initialize the lapic mapping */
215 if (!acpi_lapic)
216 register_lapic_address(mpc->lapic);
217
218 if (early)
219 return 1;
220
221 if (mpc->oemptr)
222 x86_init.mpparse.smp_read_mpc_oem(mpc);
223
224 /*
225 * Now process the configuration blocks.
226 */
227 x86_init.mpparse.mpc_record(0);
228
229 while (count < mpc->length) {
230 switch (*mpt) {
231 case MP_PROCESSOR:
232 /* ACPI may have already provided this data */
233 if (!acpi_lapic)
234 MP_processor_info((struct mpc_cpu *)mpt);
235 skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
236 break;
237 case MP_BUS:
238 MP_bus_info((struct mpc_bus *)mpt);
239 skip_entry(&mpt, &count, sizeof(struct mpc_bus));
240 break;
241 case MP_IOAPIC:
242 MP_ioapic_info((struct mpc_ioapic *)mpt);
243 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
244 break;
245 case MP_INTSRC:
246 mp_save_irq((struct mpc_intsrc *)mpt);
247 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
248 break;
249 case MP_LINTSRC:
250 MP_lintsrc_info((struct mpc_lintsrc *)mpt);
251 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
252 break;
253 default:
254 /* wrong mptable */
255 smp_dump_mptable(mpc, mpt);
256 count = mpc->length;
257 break;
258 }
259 x86_init.mpparse.mpc_record(1);
260 }
261
262 if (!num_processors)
263 pr_err("MPTABLE: no processors registered!\n");
264 return num_processors;
265}
266
267#ifdef CONFIG_X86_IO_APIC
268
269static int __init ELCR_trigger(unsigned int irq)
270{
271 unsigned int port;
272
273 port = 0x4d0 + (irq >> 3);
274 return (inb(port) >> (irq & 7)) & 1;
275}
276
277static void __init construct_default_ioirq_mptable(int mpc_default_type)
278{
279 struct mpc_intsrc intsrc;
280 int i;
281 int ELCR_fallback = 0;
282
283 intsrc.type = MP_INTSRC;
284 intsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
285 intsrc.srcbus = 0;
286 intsrc.dstapic = mpc_ioapic_id(0);
287
288 intsrc.irqtype = mp_INT;
289
290 /*
291 * If true, we have an ISA/PCI system with no IRQ entries
292 * in the MP table. To prevent the PCI interrupts from being set up
293 * incorrectly, we try to use the ELCR. The sanity check to see if
294 * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
295 * never be level sensitive, so we simply see if the ELCR agrees.
296 * If it does, we assume it's valid.
297 */
298 if (mpc_default_type == 5) {
299 pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
300
301 if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
302 ELCR_trigger(13))
303 pr_err("ELCR contains invalid data... not using ELCR\n");
304 else {
305 pr_info("Using ELCR to identify PCI interrupts\n");
306 ELCR_fallback = 1;
307 }
308 }
309
310 for (i = 0; i < 16; i++) {
311 switch (mpc_default_type) {
312 case 2:
313 if (i == 0 || i == 13)
314 continue; /* IRQ0 & IRQ13 not connected */
315 /* fall through */
316 default:
317 if (i == 2)
318 continue; /* IRQ2 is never connected */
319 }
320
321 if (ELCR_fallback) {
322 /*
323 * If the ELCR indicates a level-sensitive interrupt, we
324 * copy that information over to the MP table in the
325 * irqflag field (level sensitive, active high polarity).
326 */
327 if (ELCR_trigger(i)) {
328 intsrc.irqflag = MP_IRQTRIG_LEVEL |
329 MP_IRQPOL_ACTIVE_HIGH;
330 } else {
331 intsrc.irqflag = MP_IRQTRIG_DEFAULT |
332 MP_IRQPOL_DEFAULT;
333 }
334 }
335
336 intsrc.srcbusirq = i;
337 intsrc.dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
338 mp_save_irq(&intsrc);
339 }
340
341 intsrc.irqtype = mp_ExtINT;
342 intsrc.srcbusirq = 0;
343 intsrc.dstirq = 0; /* 8259A to INTIN0 */
344 mp_save_irq(&intsrc);
345}
346
347
348static void __init construct_ioapic_table(int mpc_default_type)
349{
350 struct mpc_ioapic ioapic;
351 struct mpc_bus bus;
352
353 bus.type = MP_BUS;
354 bus.busid = 0;
355 switch (mpc_default_type) {
356 default:
357 pr_err("???\nUnknown standard configuration %d\n",
358 mpc_default_type);
359 /* fall through */
360 case 1:
361 case 5:
362 memcpy(bus.bustype, "ISA ", 6);
363 break;
364 case 2:
365 case 6:
366 case 3:
367 memcpy(bus.bustype, "EISA ", 6);
368 break;
369 }
370 MP_bus_info(&bus);
371 if (mpc_default_type > 4) {
372 bus.busid = 1;
373 memcpy(bus.bustype, "PCI ", 6);
374 MP_bus_info(&bus);
375 }
376
377 ioapic.type = MP_IOAPIC;
378 ioapic.apicid = 2;
379 ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
380 ioapic.flags = MPC_APIC_USABLE;
381 ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE;
382 MP_ioapic_info(&ioapic);
383
384 /*
385 * We set up most of the low 16 IO-APIC pins according to MPS rules.
386 */
387 construct_default_ioirq_mptable(mpc_default_type);
388}
389#else
390static inline void __init construct_ioapic_table(int mpc_default_type) { }
391#endif
392
393static inline void __init construct_default_ISA_mptable(int mpc_default_type)
394{
395 struct mpc_cpu processor;
396 struct mpc_lintsrc lintsrc;
397 int linttypes[2] = { mp_ExtINT, mp_NMI };
398 int i;
399
400 /*
401 * local APIC has default address
402 */
403 mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
404
405 /*
406 * 2 CPUs, numbered 0 & 1.
407 */
408 processor.type = MP_PROCESSOR;
409 /* Either an integrated APIC or a discrete 82489DX. */
410 processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
411 processor.cpuflag = CPU_ENABLED;
412 processor.cpufeature = (boot_cpu_data.x86 << 8) |
413 (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_stepping;
414 processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX];
415 processor.reserved[0] = 0;
416 processor.reserved[1] = 0;
417 for (i = 0; i < 2; i++) {
418 processor.apicid = i;
419 MP_processor_info(&processor);
420 }
421
422 construct_ioapic_table(mpc_default_type);
423
424 lintsrc.type = MP_LINTSRC;
425 lintsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
426 lintsrc.srcbusid = 0;
427 lintsrc.srcbusirq = 0;
428 lintsrc.destapic = MP_APIC_ALL;
429 for (i = 0; i < 2; i++) {
430 lintsrc.irqtype = linttypes[i];
431 lintsrc.destapiclint = i;
432 MP_lintsrc_info(&lintsrc);
433 }
434}
435
436static unsigned long mpf_base;
437static bool mpf_found;
438
439static unsigned long __init get_mpc_size(unsigned long physptr)
440{
441 struct mpc_table *mpc;
442 unsigned long size;
443
444 mpc = early_memremap(physptr, PAGE_SIZE);
445 size = mpc->length;
446 early_memunmap(mpc, PAGE_SIZE);
447 apic_printk(APIC_VERBOSE, " mpc: %lx-%lx\n", physptr, physptr + size);
448
449 return size;
450}
451
452static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
453{
454 struct mpc_table *mpc;
455 unsigned long size;
456
457 size = get_mpc_size(mpf->physptr);
458 mpc = early_memremap(mpf->physptr, size);
459
460 /*
461 * Read the physical hardware table. Anything here will
462 * override the defaults.
463 */
464 if (!smp_read_mpc(mpc, early)) {
465#ifdef CONFIG_X86_LOCAL_APIC
466 smp_found_config = 0;
467#endif
468 pr_err("BIOS bug, MP table errors detected!...\n");
469 pr_cont("... disabling SMP support. (tell your hw vendor)\n");
470 early_memunmap(mpc, size);
471 return -1;
472 }
473 early_memunmap(mpc, size);
474
475 if (early)
476 return -1;
477
478#ifdef CONFIG_X86_IO_APIC
479 /*
480 * If there are no explicit MP IRQ entries, then we are
481 * broken. We set up most of the low 16 IO-APIC pins to
482 * ISA defaults and hope it will work.
483 */
484 if (!mp_irq_entries) {
485 struct mpc_bus bus;
486
487 pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
488
489 bus.type = MP_BUS;
490 bus.busid = 0;
491 memcpy(bus.bustype, "ISA ", 6);
492 MP_bus_info(&bus);
493
494 construct_default_ioirq_mptable(0);
495 }
496#endif
497
498 return 0;
499}
500
501/*
502 * Scan the memory blocks for an SMP configuration block.
503 */
504void __init default_get_smp_config(unsigned int early)
505{
506 struct mpf_intel *mpf;
507
508 if (!smp_found_config)
509 return;
510
511 if (!mpf_found)
512 return;
513
514 if (acpi_lapic && early)
515 return;
516
517 /*
518 * MPS doesn't support hyperthreading, aka only have
519 * thread 0 apic id in MPS table
520 */
521 if (acpi_lapic && acpi_ioapic)
522 return;
523
524 mpf = early_memremap(mpf_base, sizeof(*mpf));
525 if (!mpf) {
526 pr_err("MPTABLE: error mapping MP table\n");
527 return;
528 }
529
530 pr_info("Intel MultiProcessor Specification v1.%d\n",
531 mpf->specification);
532#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
533 if (mpf->feature2 & (1 << 7)) {
534 pr_info(" IMCR and PIC compatibility mode.\n");
535 pic_mode = 1;
536 } else {
537 pr_info(" Virtual Wire compatibility mode.\n");
538 pic_mode = 0;
539 }
540#endif
541 /*
542 * Now see if we need to read further.
543 */
544 if (mpf->feature1) {
545 if (early) {
546 /*
547 * local APIC has default address
548 */
549 mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
550 return;
551 }
552
553 pr_info("Default MP configuration #%d\n", mpf->feature1);
554 construct_default_ISA_mptable(mpf->feature1);
555
556 } else if (mpf->physptr) {
557 if (check_physptr(mpf, early)) {
558 early_memunmap(mpf, sizeof(*mpf));
559 return;
560 }
561 } else
562 BUG();
563
564 if (!early)
565 pr_info("Processors: %d\n", num_processors);
566 /*
567 * Only use the first configuration found.
568 */
569
570 early_memunmap(mpf, sizeof(*mpf));
571}
572
573static void __init smp_reserve_memory(struct mpf_intel *mpf)
574{
575 memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
576}
577
578static int __init smp_scan_config(unsigned long base, unsigned long length)
579{
580 unsigned int *bp;
581 struct mpf_intel *mpf;
582 int ret = 0;
583
584 apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n",
585 base, base + length - 1);
586 BUILD_BUG_ON(sizeof(*mpf) != 16);
587
588 while (length > 0) {
589 bp = early_memremap(base, length);
590 mpf = (struct mpf_intel *)bp;
591 if ((*bp == SMP_MAGIC_IDENT) &&
592 (mpf->length == 1) &&
593 !mpf_checksum((unsigned char *)bp, 16) &&
594 ((mpf->specification == 1)
595 || (mpf->specification == 4))) {
596#ifdef CONFIG_X86_LOCAL_APIC
597 smp_found_config = 1;
598#endif
599 mpf_base = base;
600 mpf_found = true;
601
602 pr_info("found SMP MP-table at [mem %#010lx-%#010lx] mapped at [%p]\n",
603 base, base + sizeof(*mpf) - 1, mpf);
604
605 memblock_reserve(base, sizeof(*mpf));
606 if (mpf->physptr)
607 smp_reserve_memory(mpf);
608
609 ret = 1;
610 }
611 early_memunmap(bp, length);
612
613 if (ret)
614 break;
615
616 base += 16;
617 length -= 16;
618 }
619 return ret;
620}
621
622void __init default_find_smp_config(void)
623{
624 unsigned int address;
625
626 /*
627 * FIXME: Linux assumes you have 640K of base ram..
628 * this continues the error...
629 *
630 * 1) Scan the bottom 1K for a signature
631 * 2) Scan the top 1K of base RAM
632 * 3) Scan the 64K of bios
633 */
634 if (smp_scan_config(0x0, 0x400) ||
635 smp_scan_config(639 * 0x400, 0x400) ||
636 smp_scan_config(0xF0000, 0x10000))
637 return;
638 /*
639 * If it is an SMP machine we should know now, unless the
640 * configuration is in an EISA bus machine with an
641 * extended bios data area.
642 *
643 * there is a real-mode segmented pointer pointing to the
644 * 4K EBDA area at 0x40E, calculate and scan it here.
645 *
646 * NOTE! There are Linux loaders that will corrupt the EBDA
647 * area, and as such this kind of SMP config may be less
648 * trustworthy, simply because the SMP table may have been
649 * stomped on during early boot. These loaders are buggy and
650 * should be fixed.
651 *
652 * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
653 */
654
655 address = get_bios_ebda();
656 if (address)
657 smp_scan_config(address, 0x400);
658}
659
660#ifdef CONFIG_X86_IO_APIC
661static u8 __initdata irq_used[MAX_IRQ_SOURCES];
662
663static int __init get_MP_intsrc_index(struct mpc_intsrc *m)
664{
665 int i;
666
667 if (m->irqtype != mp_INT)
668 return 0;
669
670 if (m->irqflag != (MP_IRQTRIG_LEVEL | MP_IRQPOL_ACTIVE_LOW))
671 return 0;
672
673 /* not legacy */
674
675 for (i = 0; i < mp_irq_entries; i++) {
676 if (mp_irqs[i].irqtype != mp_INT)
677 continue;
678
679 if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
680 MP_IRQPOL_ACTIVE_LOW))
681 continue;
682
683 if (mp_irqs[i].srcbus != m->srcbus)
684 continue;
685 if (mp_irqs[i].srcbusirq != m->srcbusirq)
686 continue;
687 if (irq_used[i]) {
688 /* already claimed */
689 return -2;
690 }
691 irq_used[i] = 1;
692 return i;
693 }
694
695 /* not found */
696 return -1;
697}
698
699#define SPARE_SLOT_NUM 20
700
701static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
702
703static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
704{
705 int i;
706
707 apic_printk(APIC_VERBOSE, "OLD ");
708 print_mp_irq_info(m);
709
710 i = get_MP_intsrc_index(m);
711 if (i > 0) {
712 memcpy(m, &mp_irqs[i], sizeof(*m));
713 apic_printk(APIC_VERBOSE, "NEW ");
714 print_mp_irq_info(&mp_irqs[i]);
715 return;
716 }
717 if (!i) {
718 /* legacy, do nothing */
719 return;
720 }
721 if (*nr_m_spare < SPARE_SLOT_NUM) {
722 /*
723 * not found (-1), or duplicated (-2) are invalid entries,
724 * we need to use the slot later
725 */
726 m_spare[*nr_m_spare] = m;
727 *nr_m_spare += 1;
728 }
729}
730
731static int __init
732check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
733{
734 if (!mpc_new_phys || count <= mpc_new_length) {
735 WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
736 return -1;
737 }
738
739 return 0;
740}
741#else /* CONFIG_X86_IO_APIC */
742static
743inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
744#endif /* CONFIG_X86_IO_APIC */
745
746static int __init replace_intsrc_all(struct mpc_table *mpc,
747 unsigned long mpc_new_phys,
748 unsigned long mpc_new_length)
749{
750#ifdef CONFIG_X86_IO_APIC
751 int i;
752#endif
753 int count = sizeof(*mpc);
754 int nr_m_spare = 0;
755 unsigned char *mpt = ((unsigned char *)mpc) + count;
756
757 pr_info("mpc_length %x\n", mpc->length);
758 while (count < mpc->length) {
759 switch (*mpt) {
760 case MP_PROCESSOR:
761 skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
762 break;
763 case MP_BUS:
764 skip_entry(&mpt, &count, sizeof(struct mpc_bus));
765 break;
766 case MP_IOAPIC:
767 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
768 break;
769 case MP_INTSRC:
770 check_irq_src((struct mpc_intsrc *)mpt, &nr_m_spare);
771 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
772 break;
773 case MP_LINTSRC:
774 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
775 break;
776 default:
777 /* wrong mptable */
778 smp_dump_mptable(mpc, mpt);
779 goto out;
780 }
781 }
782
783#ifdef CONFIG_X86_IO_APIC
784 for (i = 0; i < mp_irq_entries; i++) {
785 if (irq_used[i])
786 continue;
787
788 if (mp_irqs[i].irqtype != mp_INT)
789 continue;
790
791 if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
792 MP_IRQPOL_ACTIVE_LOW))
793 continue;
794
795 if (nr_m_spare > 0) {
796 apic_printk(APIC_VERBOSE, "*NEW* found\n");
797 nr_m_spare--;
798 memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i]));
799 m_spare[nr_m_spare] = NULL;
800 } else {
801 struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
802 count += sizeof(struct mpc_intsrc);
803 if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
804 goto out;
805 memcpy(m, &mp_irqs[i], sizeof(*m));
806 mpc->length = count;
807 mpt += sizeof(struct mpc_intsrc);
808 }
809 print_mp_irq_info(&mp_irqs[i]);
810 }
811#endif
812out:
813 /* update checksum */
814 mpc->checksum = 0;
815 mpc->checksum -= mpf_checksum((unsigned char *)mpc, mpc->length);
816
817 return 0;
818}
819
820int enable_update_mptable;
821
822static int __init update_mptable_setup(char *str)
823{
824 enable_update_mptable = 1;
825#ifdef CONFIG_PCI
826 pci_routeirq = 1;
827#endif
828 return 0;
829}
830early_param("update_mptable", update_mptable_setup);
831
832static unsigned long __initdata mpc_new_phys;
833static unsigned long mpc_new_length __initdata = 4096;
834
835/* alloc_mptable or alloc_mptable=4k */
836static int __initdata alloc_mptable;
837static int __init parse_alloc_mptable_opt(char *p)
838{
839 enable_update_mptable = 1;
840#ifdef CONFIG_PCI
841 pci_routeirq = 1;
842#endif
843 alloc_mptable = 1;
844 if (!p)
845 return 0;
846 mpc_new_length = memparse(p, &p);
847 return 0;
848}
849early_param("alloc_mptable", parse_alloc_mptable_opt);
850
851void __init e820__memblock_alloc_reserved_mpc_new(void)
852{
853 if (enable_update_mptable && alloc_mptable)
854 mpc_new_phys = e820__memblock_alloc_reserved(mpc_new_length, 4);
855}
856
857static int __init update_mp_table(void)
858{
859 char str[16];
860 char oem[10];
861 struct mpf_intel *mpf;
862 struct mpc_table *mpc, *mpc_new;
863 unsigned long size;
864
865 if (!enable_update_mptable)
866 return 0;
867
868 if (!mpf_found)
869 return 0;
870
871 mpf = early_memremap(mpf_base, sizeof(*mpf));
872 if (!mpf) {
873 pr_err("MPTABLE: mpf early_memremap() failed\n");
874 return 0;
875 }
876
877 /*
878 * Now see if we need to go further.
879 */
880 if (mpf->feature1)
881 goto do_unmap_mpf;
882
883 if (!mpf->physptr)
884 goto do_unmap_mpf;
885
886 size = get_mpc_size(mpf->physptr);
887 mpc = early_memremap(mpf->physptr, size);
888 if (!mpc) {
889 pr_err("MPTABLE: mpc early_memremap() failed\n");
890 goto do_unmap_mpf;
891 }
892
893 if (!smp_check_mpc(mpc, oem, str))
894 goto do_unmap_mpc;
895
896 pr_info("mpf: %llx\n", (u64)mpf_base);
897 pr_info("physptr: %x\n", mpf->physptr);
898
899 if (mpc_new_phys && mpc->length > mpc_new_length) {
900 mpc_new_phys = 0;
901 pr_info("mpc_new_length is %ld, please use alloc_mptable=8k\n",
902 mpc_new_length);
903 }
904
905 if (!mpc_new_phys) {
906 unsigned char old, new;
907 /* check if we can change the position */
908 mpc->checksum = 0;
909 old = mpf_checksum((unsigned char *)mpc, mpc->length);
910 mpc->checksum = 0xff;
911 new = mpf_checksum((unsigned char *)mpc, mpc->length);
912 if (old == new) {
913 pr_info("mpc is readonly, please try alloc_mptable instead\n");
914 goto do_unmap_mpc;
915 }
916 pr_info("use in-position replacing\n");
917 } else {
918 mpc_new = early_memremap(mpc_new_phys, mpc_new_length);
919 if (!mpc_new) {
920 pr_err("MPTABLE: new mpc early_memremap() failed\n");
921 goto do_unmap_mpc;
922 }
923 mpf->physptr = mpc_new_phys;
924 memcpy(mpc_new, mpc, mpc->length);
925 early_memunmap(mpc, size);
926 mpc = mpc_new;
927 size = mpc_new_length;
928 /* check if we can modify that */
929 if (mpc_new_phys - mpf->physptr) {
930 struct mpf_intel *mpf_new;
931 /* steal 16 bytes from [0, 1k) */
932 mpf_new = early_memremap(0x400 - 16, sizeof(*mpf_new));
933 if (!mpf_new) {
934 pr_err("MPTABLE: new mpf early_memremap() failed\n");
935 goto do_unmap_mpc;
936 }
937 pr_info("mpf new: %x\n", 0x400 - 16);
938 memcpy(mpf_new, mpf, 16);
939 early_memunmap(mpf, sizeof(*mpf));
940 mpf = mpf_new;
941 mpf->physptr = mpc_new_phys;
942 }
943 mpf->checksum = 0;
944 mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16);
945 pr_info("physptr new: %x\n", mpf->physptr);
946 }
947
948 /*
949 * only replace the one with mp_INT and
950 * MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
951 * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
952 * may need pci=routeirq for all coverage
953 */
954 replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
955
956do_unmap_mpc:
957 early_memunmap(mpc, size);
958
959do_unmap_mpf:
960 early_memunmap(mpf, sizeof(*mpf));
961
962 return 0;
963}
964
965late_initcall(update_mp_table);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Intel Multiprocessor Specification 1.1 and 1.4
4 * compliant MP-table parsing routines.
5 *
6 * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
7 * (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
8 * (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
9 */
10
11#include <linux/mm.h>
12#include <linux/init.h>
13#include <linux/delay.h>
14#include <linux/memblock.h>
15#include <linux/kernel_stat.h>
16#include <linux/mc146818rtc.h>
17#include <linux/bitops.h>
18#include <linux/acpi.h>
19#include <linux/smp.h>
20#include <linux/pci.h>
21
22#include <asm/i8259.h>
23#include <asm/io_apic.h>
24#include <asm/acpi.h>
25#include <asm/irqdomain.h>
26#include <asm/mtrr.h>
27#include <asm/mpspec.h>
28#include <asm/proto.h>
29#include <asm/bios_ebda.h>
30#include <asm/e820/api.h>
31#include <asm/setup.h>
32#include <asm/smp.h>
33
34#include <asm/apic.h>
35/*
36 * Checksum an MP configuration block.
37 */
38
39static unsigned int num_procs __initdata;
40
41static int __init mpf_checksum(unsigned char *mp, int len)
42{
43 int sum = 0;
44
45 while (len--)
46 sum += *mp++;
47
48 return sum & 0xFF;
49}
50
51static void __init MP_processor_info(struct mpc_cpu *m)
52{
53 char *bootup_cpu = "";
54
55 topology_register_apic(m->apicid, CPU_ACPIID_INVALID, m->cpuflag & CPU_ENABLED);
56 if (!(m->cpuflag & CPU_ENABLED))
57 return;
58
59 if (m->cpuflag & CPU_BOOTPROCESSOR)
60 bootup_cpu = " (Bootup-CPU)";
61
62 pr_info("Processor #%d%s\n", m->apicid, bootup_cpu);
63 num_procs++;
64}
65
66#ifdef CONFIG_X86_IO_APIC
67static void __init mpc_oem_bus_info(struct mpc_bus *m, char *str)
68{
69 memcpy(str, m->bustype, 6);
70 str[6] = 0;
71 apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str);
72}
73
74static void __init MP_bus_info(struct mpc_bus *m)
75{
76 char str[7];
77
78 mpc_oem_bus_info(m, str);
79
80#if MAX_MP_BUSSES < 256
81 if (m->busid >= MAX_MP_BUSSES) {
82 pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n",
83 m->busid, str, MAX_MP_BUSSES - 1);
84 return;
85 }
86#endif
87
88 set_bit(m->busid, mp_bus_not_pci);
89 if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
90#ifdef CONFIG_EISA
91 mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
92#endif
93 } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
94 clear_bit(m->busid, mp_bus_not_pci);
95#ifdef CONFIG_EISA
96 mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
97 } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
98 mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
99#endif
100 } else
101 pr_warn("Unknown bustype %s - ignoring\n", str);
102}
103
104static void __init MP_ioapic_info(struct mpc_ioapic *m)
105{
106 struct ioapic_domain_cfg cfg = {
107 .type = IOAPIC_DOMAIN_LEGACY,
108 .ops = &mp_ioapic_irqdomain_ops,
109 };
110
111 if (m->flags & MPC_APIC_USABLE)
112 mp_register_ioapic(m->apicid, m->apicaddr, gsi_top, &cfg);
113}
114
115static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
116{
117 apic_printk(APIC_VERBOSE,
118 "Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
119 mp_irq->irqtype, mp_irq->irqflag & 3,
120 (mp_irq->irqflag >> 2) & 3, mp_irq->srcbus,
121 mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
122}
123
124#else /* CONFIG_X86_IO_APIC */
125static inline void __init MP_bus_info(struct mpc_bus *m) {}
126static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {}
127#endif /* CONFIG_X86_IO_APIC */
128
129static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
130{
131 apic_printk(APIC_VERBOSE,
132 "Lint: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC LINT %02x\n",
133 m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbusid,
134 m->srcbusirq, m->destapic, m->destapiclint);
135}
136
137/*
138 * Read/parse the MPC
139 */
140static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str)
141{
142
143 if (memcmp(mpc->signature, MPC_SIGNATURE, 4)) {
144 pr_err("MPTABLE: bad signature [%c%c%c%c]!\n",
145 mpc->signature[0], mpc->signature[1],
146 mpc->signature[2], mpc->signature[3]);
147 return 0;
148 }
149 if (mpf_checksum((unsigned char *)mpc, mpc->length)) {
150 pr_err("MPTABLE: checksum error!\n");
151 return 0;
152 }
153 if (mpc->spec != 0x01 && mpc->spec != 0x04) {
154 pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec);
155 return 0;
156 }
157 if (!mpc->lapic) {
158 pr_err("MPTABLE: null local APIC address!\n");
159 return 0;
160 }
161 memcpy(oem, mpc->oem, 8);
162 oem[8] = 0;
163 pr_info("MPTABLE: OEM ID: %s\n", oem);
164
165 memcpy(str, mpc->productid, 12);
166 str[12] = 0;
167
168 pr_info("MPTABLE: Product ID: %s\n", str);
169
170 pr_info("MPTABLE: APIC at: 0x%X\n", mpc->lapic);
171
172 return 1;
173}
174
175static void skip_entry(unsigned char **ptr, int *count, int size)
176{
177 *ptr += size;
178 *count += size;
179}
180
181static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
182{
183 pr_err("Your mptable is wrong, contact your HW vendor!\n");
184 pr_cont("type %x\n", *mpt);
185 print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16,
186 1, mpc, mpc->length, 1);
187}
188
189static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
190{
191 char str[16];
192 char oem[10];
193
194 int count = sizeof(*mpc);
195 unsigned char *mpt = ((unsigned char *)mpc) + count;
196
197 if (!smp_check_mpc(mpc, oem, str))
198 return 0;
199
200 if (early) {
201 /* Initialize the lapic mapping */
202 if (!acpi_lapic)
203 register_lapic_address(mpc->lapic);
204 return 1;
205 }
206
207 /* Now process the configuration blocks. */
208 while (count < mpc->length) {
209 switch (*mpt) {
210 case MP_PROCESSOR:
211 /* ACPI may have already provided this data */
212 if (!acpi_lapic)
213 MP_processor_info((struct mpc_cpu *)mpt);
214 skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
215 break;
216 case MP_BUS:
217 MP_bus_info((struct mpc_bus *)mpt);
218 skip_entry(&mpt, &count, sizeof(struct mpc_bus));
219 break;
220 case MP_IOAPIC:
221 MP_ioapic_info((struct mpc_ioapic *)mpt);
222 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
223 break;
224 case MP_INTSRC:
225 mp_save_irq((struct mpc_intsrc *)mpt);
226 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
227 break;
228 case MP_LINTSRC:
229 MP_lintsrc_info((struct mpc_lintsrc *)mpt);
230 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
231 break;
232 default:
233 /* wrong mptable */
234 smp_dump_mptable(mpc, mpt);
235 count = mpc->length;
236 break;
237 }
238 }
239
240 if (!num_procs && !acpi_lapic)
241 pr_err("MPTABLE: no processors registered!\n");
242 return num_procs || acpi_lapic;
243}
244
245#ifdef CONFIG_X86_IO_APIC
246
247static int __init ELCR_trigger(unsigned int irq)
248{
249 unsigned int port;
250
251 port = PIC_ELCR1 + (irq >> 3);
252 return (inb(port) >> (irq & 7)) & 1;
253}
254
255static void __init construct_default_ioirq_mptable(int mpc_default_type)
256{
257 struct mpc_intsrc intsrc;
258 int i;
259 int ELCR_fallback = 0;
260
261 intsrc.type = MP_INTSRC;
262 intsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
263 intsrc.srcbus = 0;
264 intsrc.dstapic = mpc_ioapic_id(0);
265
266 intsrc.irqtype = mp_INT;
267
268 /*
269 * If true, we have an ISA/PCI system with no IRQ entries
270 * in the MP table. To prevent the PCI interrupts from being set up
271 * incorrectly, we try to use the ELCR. The sanity check to see if
272 * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
273 * never be level sensitive, so we simply see if the ELCR agrees.
274 * If it does, we assume it's valid.
275 */
276 if (mpc_default_type == 5) {
277 pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
278
279 if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
280 ELCR_trigger(13))
281 pr_err("ELCR contains invalid data... not using ELCR\n");
282 else {
283 pr_info("Using ELCR to identify PCI interrupts\n");
284 ELCR_fallback = 1;
285 }
286 }
287
288 for (i = 0; i < 16; i++) {
289 switch (mpc_default_type) {
290 case 2:
291 if (i == 0 || i == 13)
292 continue; /* IRQ0 & IRQ13 not connected */
293 fallthrough;
294 default:
295 if (i == 2)
296 continue; /* IRQ2 is never connected */
297 }
298
299 if (ELCR_fallback) {
300 /*
301 * If the ELCR indicates a level-sensitive interrupt, we
302 * copy that information over to the MP table in the
303 * irqflag field (level sensitive, active high polarity).
304 */
305 if (ELCR_trigger(i)) {
306 intsrc.irqflag = MP_IRQTRIG_LEVEL |
307 MP_IRQPOL_ACTIVE_HIGH;
308 } else {
309 intsrc.irqflag = MP_IRQTRIG_DEFAULT |
310 MP_IRQPOL_DEFAULT;
311 }
312 }
313
314 intsrc.srcbusirq = i;
315 intsrc.dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
316 mp_save_irq(&intsrc);
317 }
318
319 intsrc.irqtype = mp_ExtINT;
320 intsrc.srcbusirq = 0;
321 intsrc.dstirq = 0; /* 8259A to INTIN0 */
322 mp_save_irq(&intsrc);
323}
324
325
326static void __init construct_ioapic_table(int mpc_default_type)
327{
328 struct mpc_ioapic ioapic;
329 struct mpc_bus bus;
330
331 bus.type = MP_BUS;
332 bus.busid = 0;
333 switch (mpc_default_type) {
334 default:
335 pr_err("???\nUnknown standard configuration %d\n",
336 mpc_default_type);
337 fallthrough;
338 case 1:
339 case 5:
340 memcpy(bus.bustype, "ISA ", 6);
341 break;
342 case 2:
343 case 6:
344 case 3:
345 memcpy(bus.bustype, "EISA ", 6);
346 break;
347 }
348 MP_bus_info(&bus);
349 if (mpc_default_type > 4) {
350 bus.busid = 1;
351 memcpy(bus.bustype, "PCI ", 6);
352 MP_bus_info(&bus);
353 }
354
355 ioapic.type = MP_IOAPIC;
356 ioapic.apicid = 2;
357 ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
358 ioapic.flags = MPC_APIC_USABLE;
359 ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE;
360 MP_ioapic_info(&ioapic);
361
362 /*
363 * We set up most of the low 16 IO-APIC pins according to MPS rules.
364 */
365 construct_default_ioirq_mptable(mpc_default_type);
366}
367#else
368static inline void __init construct_ioapic_table(int mpc_default_type) { }
369#endif
370
371static inline void __init construct_default_ISA_mptable(int mpc_default_type)
372{
373 struct mpc_cpu processor;
374 struct mpc_lintsrc lintsrc;
375 int linttypes[2] = { mp_ExtINT, mp_NMI };
376 int i;
377
378 /*
379 * 2 CPUs, numbered 0 & 1.
380 */
381 processor.type = MP_PROCESSOR;
382 /* Either an integrated APIC or a discrete 82489DX. */
383 processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
384 processor.cpuflag = CPU_ENABLED;
385 processor.cpufeature = (boot_cpu_data.x86 << 8) |
386 (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_stepping;
387 processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX];
388 processor.reserved[0] = 0;
389 processor.reserved[1] = 0;
390 for (i = 0; i < 2; i++) {
391 processor.apicid = i;
392 MP_processor_info(&processor);
393 }
394
395 construct_ioapic_table(mpc_default_type);
396
397 lintsrc.type = MP_LINTSRC;
398 lintsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
399 lintsrc.srcbusid = 0;
400 lintsrc.srcbusirq = 0;
401 lintsrc.destapic = MP_APIC_ALL;
402 for (i = 0; i < 2; i++) {
403 lintsrc.irqtype = linttypes[i];
404 lintsrc.destapiclint = i;
405 MP_lintsrc_info(&lintsrc);
406 }
407}
408
409static unsigned long mpf_base;
410static bool mpf_found;
411
412static unsigned long __init get_mpc_size(unsigned long physptr)
413{
414 struct mpc_table *mpc;
415 unsigned long size;
416
417 mpc = early_memremap(physptr, PAGE_SIZE);
418 size = mpc->length;
419 early_memunmap(mpc, PAGE_SIZE);
420 apic_printk(APIC_VERBOSE, " mpc: %lx-%lx\n", physptr, physptr + size);
421
422 return size;
423}
424
425static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
426{
427 struct mpc_table *mpc;
428 unsigned long size;
429
430 size = get_mpc_size(mpf->physptr);
431 mpc = early_memremap(mpf->physptr, size);
432
433 /*
434 * Read the physical hardware table. Anything here will
435 * override the defaults.
436 */
437 if (!smp_read_mpc(mpc, early)) {
438#ifdef CONFIG_X86_LOCAL_APIC
439 smp_found_config = 0;
440#endif
441 pr_err("BIOS bug, MP table errors detected!...\n");
442 pr_cont("... disabling SMP support. (tell your hw vendor)\n");
443 early_memunmap(mpc, size);
444 return -1;
445 }
446 early_memunmap(mpc, size);
447
448 if (early)
449 return -1;
450
451#ifdef CONFIG_X86_IO_APIC
452 /*
453 * If there are no explicit MP IRQ entries, then we are
454 * broken. We set up most of the low 16 IO-APIC pins to
455 * ISA defaults and hope it will work.
456 */
457 if (!mp_irq_entries) {
458 struct mpc_bus bus;
459
460 pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
461
462 bus.type = MP_BUS;
463 bus.busid = 0;
464 memcpy(bus.bustype, "ISA ", 6);
465 MP_bus_info(&bus);
466
467 construct_default_ioirq_mptable(0);
468 }
469#endif
470
471 return 0;
472}
473
474/*
475 * Scan the memory blocks for an SMP configuration block.
476 */
477static __init void mpparse_get_smp_config(unsigned int early)
478{
479 struct mpf_intel *mpf;
480
481 if (!smp_found_config)
482 return;
483
484 if (!mpf_found)
485 return;
486
487 if (acpi_lapic && early)
488 return;
489
490 /*
491 * MPS doesn't support hyperthreading, aka only have
492 * thread 0 apic id in MPS table
493 */
494 if (acpi_lapic && acpi_ioapic)
495 return;
496
497 mpf = early_memremap(mpf_base, sizeof(*mpf));
498 if (!mpf) {
499 pr_err("MPTABLE: error mapping MP table\n");
500 return;
501 }
502
503 pr_info("Intel MultiProcessor Specification v1.%d\n",
504 mpf->specification);
505#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
506 if (mpf->feature2 & (1 << 7)) {
507 pr_info(" IMCR and PIC compatibility mode.\n");
508 pic_mode = 1;
509 } else {
510 pr_info(" Virtual Wire compatibility mode.\n");
511 pic_mode = 0;
512 }
513#endif
514 /*
515 * Now see if we need to read further.
516 */
517 if (mpf->feature1) {
518 if (early) {
519 /* Local APIC has default address */
520 register_lapic_address(APIC_DEFAULT_PHYS_BASE);
521 goto out;
522 }
523
524 pr_info("Default MP configuration #%d\n", mpf->feature1);
525 construct_default_ISA_mptable(mpf->feature1);
526
527 } else if (mpf->physptr) {
528 if (check_physptr(mpf, early))
529 goto out;
530 } else
531 BUG();
532
533 if (!early && !acpi_lapic)
534 pr_info("Processors: %d\n", num_procs);
535 /*
536 * Only use the first configuration found.
537 */
538out:
539 early_memunmap(mpf, sizeof(*mpf));
540}
541
542void __init mpparse_parse_early_smp_config(void)
543{
544 mpparse_get_smp_config(true);
545}
546
547void __init mpparse_parse_smp_config(void)
548{
549 mpparse_get_smp_config(false);
550}
551
552static void __init smp_reserve_memory(struct mpf_intel *mpf)
553{
554 memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
555}
556
557static int __init smp_scan_config(unsigned long base, unsigned long length)
558{
559 unsigned int *bp;
560 struct mpf_intel *mpf;
561 int ret = 0;
562
563 apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n",
564 base, base + length - 1);
565 BUILD_BUG_ON(sizeof(*mpf) != 16);
566
567 while (length > 0) {
568 bp = early_memremap(base, length);
569 mpf = (struct mpf_intel *)bp;
570 if ((*bp == SMP_MAGIC_IDENT) &&
571 (mpf->length == 1) &&
572 !mpf_checksum((unsigned char *)bp, 16) &&
573 ((mpf->specification == 1)
574 || (mpf->specification == 4))) {
575#ifdef CONFIG_X86_LOCAL_APIC
576 smp_found_config = 1;
577#endif
578 mpf_base = base;
579 mpf_found = true;
580
581 pr_info("found SMP MP-table at [mem %#010lx-%#010lx]\n",
582 base, base + sizeof(*mpf) - 1);
583
584 memblock_reserve(base, sizeof(*mpf));
585 if (mpf->physptr)
586 smp_reserve_memory(mpf);
587
588 ret = 1;
589 }
590 early_memunmap(bp, length);
591
592 if (ret)
593 break;
594
595 base += 16;
596 length -= 16;
597 }
598 return ret;
599}
600
601void __init mpparse_find_mptable(void)
602{
603 unsigned int address;
604
605 /*
606 * FIXME: Linux assumes you have 640K of base ram..
607 * this continues the error...
608 *
609 * 1) Scan the bottom 1K for a signature
610 * 2) Scan the top 1K of base RAM
611 * 3) Scan the 64K of bios
612 */
613 if (smp_scan_config(0x0, 0x400) ||
614 smp_scan_config(639 * 0x400, 0x400) ||
615 smp_scan_config(0xF0000, 0x10000))
616 return;
617 /*
618 * If it is an SMP machine we should know now, unless the
619 * configuration is in an EISA bus machine with an
620 * extended bios data area.
621 *
622 * there is a real-mode segmented pointer pointing to the
623 * 4K EBDA area at 0x40E, calculate and scan it here.
624 *
625 * NOTE! There are Linux loaders that will corrupt the EBDA
626 * area, and as such this kind of SMP config may be less
627 * trustworthy, simply because the SMP table may have been
628 * stomped on during early boot. These loaders are buggy and
629 * should be fixed.
630 *
631 * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
632 */
633
634 address = get_bios_ebda();
635 if (address)
636 smp_scan_config(address, 0x400);
637}
638
639#ifdef CONFIG_X86_IO_APIC
640static u8 __initdata irq_used[MAX_IRQ_SOURCES];
641
642static int __init get_MP_intsrc_index(struct mpc_intsrc *m)
643{
644 int i;
645
646 if (m->irqtype != mp_INT)
647 return 0;
648
649 if (m->irqflag != (MP_IRQTRIG_LEVEL | MP_IRQPOL_ACTIVE_LOW))
650 return 0;
651
652 /* not legacy */
653
654 for (i = 0; i < mp_irq_entries; i++) {
655 if (mp_irqs[i].irqtype != mp_INT)
656 continue;
657
658 if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
659 MP_IRQPOL_ACTIVE_LOW))
660 continue;
661
662 if (mp_irqs[i].srcbus != m->srcbus)
663 continue;
664 if (mp_irqs[i].srcbusirq != m->srcbusirq)
665 continue;
666 if (irq_used[i]) {
667 /* already claimed */
668 return -2;
669 }
670 irq_used[i] = 1;
671 return i;
672 }
673
674 /* not found */
675 return -1;
676}
677
678#define SPARE_SLOT_NUM 20
679
680static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
681
682static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
683{
684 int i;
685
686 apic_printk(APIC_VERBOSE, "OLD ");
687 print_mp_irq_info(m);
688
689 i = get_MP_intsrc_index(m);
690 if (i > 0) {
691 memcpy(m, &mp_irqs[i], sizeof(*m));
692 apic_printk(APIC_VERBOSE, "NEW ");
693 print_mp_irq_info(&mp_irqs[i]);
694 return;
695 }
696 if (!i) {
697 /* legacy, do nothing */
698 return;
699 }
700 if (*nr_m_spare < SPARE_SLOT_NUM) {
701 /*
702 * not found (-1), or duplicated (-2) are invalid entries,
703 * we need to use the slot later
704 */
705 m_spare[*nr_m_spare] = m;
706 *nr_m_spare += 1;
707 }
708}
709
710static int __init
711check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
712{
713 if (!mpc_new_phys || count <= mpc_new_length) {
714 WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
715 return -1;
716 }
717
718 return 0;
719}
720#else /* CONFIG_X86_IO_APIC */
721static
722inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
723#endif /* CONFIG_X86_IO_APIC */
724
725static int __init replace_intsrc_all(struct mpc_table *mpc,
726 unsigned long mpc_new_phys,
727 unsigned long mpc_new_length)
728{
729#ifdef CONFIG_X86_IO_APIC
730 int i;
731#endif
732 int count = sizeof(*mpc);
733 int nr_m_spare = 0;
734 unsigned char *mpt = ((unsigned char *)mpc) + count;
735
736 pr_info("mpc_length %x\n", mpc->length);
737 while (count < mpc->length) {
738 switch (*mpt) {
739 case MP_PROCESSOR:
740 skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
741 break;
742 case MP_BUS:
743 skip_entry(&mpt, &count, sizeof(struct mpc_bus));
744 break;
745 case MP_IOAPIC:
746 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
747 break;
748 case MP_INTSRC:
749 check_irq_src((struct mpc_intsrc *)mpt, &nr_m_spare);
750 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
751 break;
752 case MP_LINTSRC:
753 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
754 break;
755 default:
756 /* wrong mptable */
757 smp_dump_mptable(mpc, mpt);
758 goto out;
759 }
760 }
761
762#ifdef CONFIG_X86_IO_APIC
763 for (i = 0; i < mp_irq_entries; i++) {
764 if (irq_used[i])
765 continue;
766
767 if (mp_irqs[i].irqtype != mp_INT)
768 continue;
769
770 if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
771 MP_IRQPOL_ACTIVE_LOW))
772 continue;
773
774 if (nr_m_spare > 0) {
775 apic_printk(APIC_VERBOSE, "*NEW* found\n");
776 nr_m_spare--;
777 memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i]));
778 m_spare[nr_m_spare] = NULL;
779 } else {
780 struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
781 count += sizeof(struct mpc_intsrc);
782 if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
783 goto out;
784 memcpy(m, &mp_irqs[i], sizeof(*m));
785 mpc->length = count;
786 mpt += sizeof(struct mpc_intsrc);
787 }
788 print_mp_irq_info(&mp_irqs[i]);
789 }
790#endif
791out:
792 /* update checksum */
793 mpc->checksum = 0;
794 mpc->checksum -= mpf_checksum((unsigned char *)mpc, mpc->length);
795
796 return 0;
797}
798
799int enable_update_mptable;
800
801static int __init update_mptable_setup(char *str)
802{
803 enable_update_mptable = 1;
804#ifdef CONFIG_PCI
805 pci_routeirq = 1;
806#endif
807 return 0;
808}
809early_param("update_mptable", update_mptable_setup);
810
811static unsigned long __initdata mpc_new_phys;
812static unsigned long mpc_new_length __initdata = 4096;
813
814/* alloc_mptable or alloc_mptable=4k */
815static int __initdata alloc_mptable;
816static int __init parse_alloc_mptable_opt(char *p)
817{
818 enable_update_mptable = 1;
819#ifdef CONFIG_PCI
820 pci_routeirq = 1;
821#endif
822 alloc_mptable = 1;
823 if (!p)
824 return 0;
825 mpc_new_length = memparse(p, &p);
826 return 0;
827}
828early_param("alloc_mptable", parse_alloc_mptable_opt);
829
830void __init e820__memblock_alloc_reserved_mpc_new(void)
831{
832 if (enable_update_mptable && alloc_mptable)
833 mpc_new_phys = e820__memblock_alloc_reserved(mpc_new_length, 4);
834}
835
836static int __init update_mp_table(void)
837{
838 char str[16];
839 char oem[10];
840 struct mpf_intel *mpf;
841 struct mpc_table *mpc, *mpc_new;
842 unsigned long size;
843
844 if (!enable_update_mptable)
845 return 0;
846
847 if (!mpf_found)
848 return 0;
849
850 mpf = early_memremap(mpf_base, sizeof(*mpf));
851 if (!mpf) {
852 pr_err("MPTABLE: mpf early_memremap() failed\n");
853 return 0;
854 }
855
856 /*
857 * Now see if we need to go further.
858 */
859 if (mpf->feature1)
860 goto do_unmap_mpf;
861
862 if (!mpf->physptr)
863 goto do_unmap_mpf;
864
865 size = get_mpc_size(mpf->physptr);
866 mpc = early_memremap(mpf->physptr, size);
867 if (!mpc) {
868 pr_err("MPTABLE: mpc early_memremap() failed\n");
869 goto do_unmap_mpf;
870 }
871
872 if (!smp_check_mpc(mpc, oem, str))
873 goto do_unmap_mpc;
874
875 pr_info("mpf: %llx\n", (u64)mpf_base);
876 pr_info("physptr: %x\n", mpf->physptr);
877
878 if (mpc_new_phys && mpc->length > mpc_new_length) {
879 mpc_new_phys = 0;
880 pr_info("mpc_new_length is %ld, please use alloc_mptable=8k\n",
881 mpc_new_length);
882 }
883
884 if (!mpc_new_phys) {
885 unsigned char old, new;
886 /* check if we can change the position */
887 mpc->checksum = 0;
888 old = mpf_checksum((unsigned char *)mpc, mpc->length);
889 mpc->checksum = 0xff;
890 new = mpf_checksum((unsigned char *)mpc, mpc->length);
891 if (old == new) {
892 pr_info("mpc is readonly, please try alloc_mptable instead\n");
893 goto do_unmap_mpc;
894 }
895 pr_info("use in-position replacing\n");
896 } else {
897 mpc_new = early_memremap(mpc_new_phys, mpc_new_length);
898 if (!mpc_new) {
899 pr_err("MPTABLE: new mpc early_memremap() failed\n");
900 goto do_unmap_mpc;
901 }
902 mpf->physptr = mpc_new_phys;
903 memcpy(mpc_new, mpc, mpc->length);
904 early_memunmap(mpc, size);
905 mpc = mpc_new;
906 size = mpc_new_length;
907 /* check if we can modify that */
908 if (mpc_new_phys - mpf->physptr) {
909 struct mpf_intel *mpf_new;
910 /* steal 16 bytes from [0, 1k) */
911 mpf_new = early_memremap(0x400 - 16, sizeof(*mpf_new));
912 if (!mpf_new) {
913 pr_err("MPTABLE: new mpf early_memremap() failed\n");
914 goto do_unmap_mpc;
915 }
916 pr_info("mpf new: %x\n", 0x400 - 16);
917 memcpy(mpf_new, mpf, 16);
918 early_memunmap(mpf, sizeof(*mpf));
919 mpf = mpf_new;
920 mpf->physptr = mpc_new_phys;
921 }
922 mpf->checksum = 0;
923 mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16);
924 pr_info("physptr new: %x\n", mpf->physptr);
925 }
926
927 /*
928 * only replace the one with mp_INT and
929 * MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
930 * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
931 * may need pci=routeirq for all coverage
932 */
933 replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
934
935do_unmap_mpc:
936 early_memunmap(mpc, size);
937
938do_unmap_mpf:
939 early_memunmap(mpf, sizeof(*mpf));
940
941 return 0;
942}
943
944late_initcall(update_mp_table);