Loading...
1/*
2 * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver
3 *
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
25 *
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
38 *
39 */
40
41#ifndef _PM8001_DEFS_H_
42#define _PM8001_DEFS_H_
43
44enum chip_flavors {
45 chip_8001,
46 chip_8008,
47 chip_8009,
48 chip_8018,
49 chip_8019,
50 chip_8074,
51 chip_8076,
52 chip_8077,
53 chip_8006,
54 chip_8070,
55 chip_8072
56};
57
58enum phy_speed {
59 PHY_SPEED_15 = 0x01,
60 PHY_SPEED_30 = 0x02,
61 PHY_SPEED_60 = 0x04,
62 PHY_SPEED_120 = 0x08,
63};
64
65enum data_direction {
66 DATA_DIR_NONE = 0x0, /* NO TRANSFER */
67 DATA_DIR_IN = 0x01, /* INBOUND */
68 DATA_DIR_OUT = 0x02, /* OUTBOUND */
69 DATA_DIR_BYRECIPIENT = 0x04, /* UNSPECIFIED */
70};
71
72enum port_type {
73 PORT_TYPE_SAS = (1L << 1),
74 PORT_TYPE_SATA = (1L << 0),
75};
76
77/* driver compile-time configuration */
78#define PM8001_MAX_CCB 512 /* max ccbs supported */
79#define PM8001_MPI_QUEUE 1024 /* maximum mpi queue entries */
80#define PM8001_MAX_INB_NUM 1
81#define PM8001_MAX_OUTB_NUM 1
82#define PM8001_MAX_SPCV_INB_NUM 1
83#define PM8001_MAX_SPCV_OUTB_NUM 4
84#define PM8001_CAN_QUEUE 508 /* SCSI Queue depth */
85
86/* Inbound/Outbound queue size */
87#define IOMB_SIZE_SPC 64
88#define IOMB_SIZE_SPCV 128
89
90/* unchangeable hardware details */
91#define PM8001_MAX_PHYS 16 /* max. possible phys */
92#define PM8001_MAX_PORTS 16 /* max. possible ports */
93#define PM8001_MAX_DEVICES 2048 /* max supported device */
94#define PM8001_MAX_MSIX_VEC 64 /* max msi-x int for spcv/ve */
95
96#define USI_MAX_MEMCNT_BASE 5
97#define IB (USI_MAX_MEMCNT_BASE + 1)
98#define CI (IB + PM8001_MAX_SPCV_INB_NUM)
99#define OB (CI + PM8001_MAX_SPCV_INB_NUM)
100#define PI (OB + PM8001_MAX_SPCV_OUTB_NUM)
101#define USI_MAX_MEMCNT (PI + PM8001_MAX_SPCV_OUTB_NUM)
102#define PM8001_MAX_DMA_SG SG_ALL
103enum memory_region_num {
104 AAP1 = 0x0, /* application acceleration processor */
105 IOP, /* IO processor */
106 NVMD, /* NVM device */
107 DEV_MEM, /* memory for devices */
108 CCB_MEM, /* memory for command control block */
109 FW_FLASH, /* memory for fw flash update */
110 FORENSIC_MEM /* memory for fw forensic data */
111};
112#define PM8001_EVENT_LOG_SIZE (128 * 1024)
113
114/*error code*/
115enum mpi_err {
116 MPI_IO_STATUS_SUCCESS = 0x0,
117 MPI_IO_STATUS_BUSY = 0x01,
118 MPI_IO_STATUS_FAIL = 0x02,
119};
120
121/**
122 * Phy Control constants
123 */
124enum phy_control_type {
125 PHY_LINK_RESET = 0x01,
126 PHY_HARD_RESET = 0x02,
127 PHY_NOTIFY_ENABLE_SPINUP = 0x10,
128};
129
130enum pm8001_hba_info_flags {
131 PM8001F_INIT_TIME = (1U << 0),
132 PM8001F_RUN_TIME = (1U << 1),
133};
134
135#endif
1/*
2 * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver
3 *
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
25 *
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
38 *
39 */
40
41#ifndef _PM8001_DEFS_H_
42#define _PM8001_DEFS_H_
43
44enum chip_flavors {
45 chip_8001,
46 chip_8008,
47 chip_8009,
48 chip_8018,
49 chip_8019,
50 chip_8074,
51 chip_8076,
52 chip_8077,
53 chip_8006,
54 chip_8070,
55 chip_8072
56};
57
58enum phy_speed {
59 PHY_SPEED_15 = 0x01,
60 PHY_SPEED_30 = 0x02,
61 PHY_SPEED_60 = 0x04,
62 PHY_SPEED_120 = 0x08,
63};
64
65enum data_direction {
66 DATA_DIR_NONE = 0x0, /* NO TRANSFER */
67 DATA_DIR_IN = 0x01, /* INBOUND */
68 DATA_DIR_OUT = 0x02, /* OUTBOUND */
69 DATA_DIR_BYRECIPIENT = 0x04, /* UNSPECIFIED */
70};
71
72enum port_type {
73 PORT_TYPE_SAS = (1L << 1),
74 PORT_TYPE_SATA = (1L << 0),
75};
76
77/* driver compile-time configuration */
78#define PM8001_MAX_CCB 1024 /* max ccbs supported */
79#define PM8001_MPI_QUEUE 1024 /* maximum mpi queue entries */
80#define PM8001_MAX_INB_NUM 64
81#define PM8001_MAX_OUTB_NUM 64
82#define PM8001_CAN_QUEUE 508 /* SCSI Queue depth */
83
84/* Inbound/Outbound queue size */
85#define IOMB_SIZE_SPC 64
86#define IOMB_SIZE_SPCV 128
87
88/* unchangeable hardware details */
89#define PM8001_MAX_PHYS 16 /* max. possible phys */
90#define PM8001_MAX_PORTS 16 /* max. possible ports */
91#define PM8001_MAX_DEVICES 2048 /* max supported device */
92#define PM8001_MAX_MSIX_VEC 64 /* max msi-x int for spcv/ve */
93#define PM8001_RESERVE_SLOT 8
94
95#define CONFIG_SCSI_PM8001_MAX_DMA_SG 528
96#define PM8001_MAX_DMA_SG CONFIG_SCSI_PM8001_MAX_DMA_SG
97
98enum memory_region_num {
99 AAP1 = 0x0, /* application acceleration processor */
100 IOP, /* IO processor */
101 NVMD, /* NVM device */
102 FW_FLASH, /* memory for fw flash update */
103 FORENSIC_MEM, /* memory for fw forensic data */
104 USI_MAX_MEMCNT_BASE
105};
106#define PM8001_EVENT_LOG_SIZE (128 * 1024)
107
108/**
109 * maximum DMA memory regions(number of IBQ + number of IBQ CI
110 * + number of OBQ + number of OBQ PI)
111 */
112#define USI_MAX_MEMCNT (USI_MAX_MEMCNT_BASE + ((2 * PM8001_MAX_INB_NUM) \
113 + (2 * PM8001_MAX_OUTB_NUM)))
114/*error code*/
115enum mpi_err {
116 MPI_IO_STATUS_SUCCESS = 0x0,
117 MPI_IO_STATUS_BUSY = 0x01,
118 MPI_IO_STATUS_FAIL = 0x02,
119};
120
121/**
122 * Phy Control constants
123 */
124enum phy_control_type {
125 PHY_LINK_RESET = 0x01,
126 PHY_HARD_RESET = 0x02,
127 PHY_NOTIFY_ENABLE_SPINUP = 0x10,
128};
129
130enum pm8001_hba_info_flags {
131 PM8001F_INIT_TIME = (1U << 0),
132 PM8001F_RUN_TIME = (1U << 1),
133};
134
135/**
136 * Phy Status
137 */
138#define PHY_LINK_DISABLE 0x00
139#define PHY_LINK_DOWN 0x01
140#define PHY_STATE_LINK_UP_SPCV 0x2
141#define PHY_STATE_LINK_UP_SPC 0x1
142
143#endif