Loading...
1/*
2 * MPC8568E MDS Device Tree Source
3 *
4 * Copyright 2007, 2008 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12/include/ "mpc8568si-pre.dtsi"
13
14/ {
15 model = "MPC8568EMDS";
16 compatible = "MPC8568EMDS", "MPC85xxMDS";
17
18 aliases {
19 pci0 = &pci0;
20 pci1 = &pci1;
21 rapidio0 = &rio;
22 };
23
24 memory {
25 device_type = "memory";
26 reg = <0x0 0x0 0x0 0x0>;
27 };
28
29 lbc: localbus@e0005000 {
30 reg = <0x0 0xe0005000 0x0 0x1000>;
31 ranges = <0x0 0x0 0xfe000000 0x02000000
32 0x1 0x0 0xf8000000 0x00008000
33 0x2 0x0 0xf0000000 0x04000000
34 0x4 0x0 0xf8008000 0x00008000
35 0x5 0x0 0xf8010000 0x00008000>;
36
37 nor@0,0 {
38 #address-cells = <1>;
39 #size-cells = <1>;
40 compatible = "cfi-flash";
41 reg = <0x0 0x0 0x02000000>;
42 bank-width = <2>;
43 device-width = <2>;
44 };
45
46 bcsr@1,0 {
47 #address-cells = <1>;
48 #size-cells = <1>;
49 compatible = "fsl,mpc8568mds-bcsr";
50 reg = <1 0 0x8000>;
51 ranges = <0 1 0 0x8000>;
52
53 bcsr5: gpio-controller@11 {
54 #gpio-cells = <2>;
55 compatible = "fsl,mpc8568mds-bcsr-gpio";
56 reg = <0x5 0x1>;
57 gpio-controller;
58 };
59 };
60
61 pib@4,0 {
62 compatible = "fsl,mpc8568mds-pib";
63 reg = <4 0 0x8000>;
64 };
65
66 pib@5,0 {
67 compatible = "fsl,mpc8568mds-pib";
68 reg = <5 0 0x8000>;
69 };
70 };
71
72 soc: soc8568@e0000000 {
73 ranges = <0x0 0x0 0xe0000000 0x100000>;
74
75 i2c-sleep-nexus {
76 i2c@3000 {
77 rtc@68 {
78 compatible = "dallas,ds1374";
79 reg = <0x68>;
80 interrupts = <3 1 0 0>;
81 };
82 };
83 };
84
85 enet0: ethernet@24000 {
86 tbi-handle = <&tbi0>;
87 phy-handle = <&phy2>;
88 };
89
90 mdio@24520 {
91 phy0: ethernet-phy@7 {
92 interrupts = <1 1 0 0>;
93 reg = <0x7>;
94 };
95 phy1: ethernet-phy@1 {
96 interrupts = <2 1 0 0>;
97 reg = <0x1>;
98 };
99 phy2: ethernet-phy@2 {
100 interrupts = <1 1 0 0>;
101 reg = <0x2>;
102 };
103 phy3: ethernet-phy@3 {
104 interrupts = <2 1 0 0>;
105 reg = <0x3>;
106 };
107 tbi0: tbi-phy@11 {
108 reg = <0x11>;
109 device_type = "tbi-phy";
110 };
111 };
112
113 enet1: ethernet@25000 {
114 tbi-handle = <&tbi1>;
115 phy-handle = <&phy3>;
116 sleep = <&pmc 0x00000040>;
117 };
118
119 mdio@25520 {
120 tbi1: tbi-phy@11 {
121 reg = <0x11>;
122 device_type = "tbi-phy";
123 };
124 };
125
126 par_io@e0100 {
127 num-ports = <7>;
128
129 pio1: ucc_pin@1 {
130 pio-map = <
131 /* port pin dir open_drain assignment has_irq */
132 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
133 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
134 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
135 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
136 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
137 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
138 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
139 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
140 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
141 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
142 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
143 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
144 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
145 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
146 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
147 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
148 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
149 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
150 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
151 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
152 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
153 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
154 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */
155 };
156
157 pio2: ucc_pin@2 {
158 pio-map = <
159 /* port pin dir open_drain assignment has_irq */
160 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
161 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
162 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
163 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
164 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
165 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
166 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
167 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
168 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
169 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
170 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
171 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
172 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
173 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
174 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
175 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
176 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
177 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
178 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
179 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
180 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
181 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
182 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */
183 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */
184 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */
185 };
186 };
187 };
188
189 qe: qe@e0080000 {
190 ranges = <0x0 0x0 0xe0080000 0x40000>;
191 reg = <0x0 0xe0080000 0x0 0x480>;
192
193 spi@4c0 {
194 mode = "cpu";
195 };
196
197 spi@500 {
198 mode = "cpu";
199 };
200
201 enet2: ucc@2000 {
202 device_type = "network";
203 compatible = "ucc_geth";
204 local-mac-address = [ 00 00 00 00 00 00 ];
205 rx-clock-name = "none";
206 tx-clock-name = "clk16";
207 pio-handle = <&pio1>;
208 phy-handle = <&phy0>;
209 phy-connection-type = "rgmii-id";
210 };
211
212 enet3: ucc@3000 {
213 device_type = "network";
214 compatible = "ucc_geth";
215 local-mac-address = [ 00 00 00 00 00 00 ];
216 rx-clock-name = "none";
217 tx-clock-name = "clk16";
218 pio-handle = <&pio2>;
219 phy-handle = <&phy1>;
220 phy-connection-type = "rgmii-id";
221 };
222
223 mdio@2120 {
224 #address-cells = <1>;
225 #size-cells = <0>;
226 reg = <0x2120 0x18>;
227 compatible = "fsl,ucc-mdio";
228
229 /* These are the same PHYs as on
230 * gianfar's MDIO bus */
231 qe_phy0: ethernet-phy@7 {
232 interrupt-parent = <&mpic>;
233 interrupts = <1 1 0 0>;
234 reg = <0x7>;
235 };
236 qe_phy1: ethernet-phy@1 {
237 interrupt-parent = <&mpic>;
238 interrupts = <2 1 0 0>;
239 reg = <0x1>;
240 };
241 qe_phy2: ethernet-phy@2 {
242 interrupt-parent = <&mpic>;
243 interrupts = <1 1 0 0>;
244 reg = <0x2>;
245 };
246 qe_phy3: ethernet-phy@3 {
247 interrupt-parent = <&mpic>;
248 interrupts = <2 1 0 0>;
249 reg = <0x3>;
250 };
251 };
252 };
253
254 pci0: pci@e0008000 {
255 reg = <0x0 0xe0008000 0x0 0x1000>;
256 ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
257 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
258 clock-frequency = <66666666>;
259 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
260 interrupt-map = <
261 /* IDSEL 0x12 AD18 */
262 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
263 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
264 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
265 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
266
267 /* IDSEL 0x13 AD19 */
268 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
269 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
270 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
271 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
272 };
273
274 /* PCI Express */
275 pci1: pcie@e000a000 {
276 ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
277 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
278 reg = <0x0 0xe000a000 0x0 0x1000>;
279 pcie@0 {
280 ranges = <0x2000000 0x0 0xa0000000
281 0x2000000 0x0 0xa0000000
282 0x0 0x10000000
283
284 0x1000000 0x0 0x0
285 0x1000000 0x0 0x0
286 0x0 0x800000>;
287 };
288 };
289
290 rio: rapidio@e00c00000 {
291 reg = <0x0 0xe00c0000 0x0 0x20000>;
292 port1 {
293 ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
294 };
295 };
296
297 leds {
298 compatible = "gpio-leds";
299
300 green {
301 gpios = <&bcsr5 1 0>;
302 };
303
304 amber {
305 gpios = <&bcsr5 2 0>;
306 };
307
308 red {
309 gpios = <&bcsr5 3 0>;
310 };
311 };
312};
313
314/include/ "mpc8568si-post.dtsi"
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8568E MDS Device Tree Source
4 *
5 * Copyright 2007, 2008 Freescale Semiconductor Inc.
6 */
7
8/include/ "mpc8568si-pre.dtsi"
9
10/ {
11 model = "MPC8568EMDS";
12 compatible = "MPC8568EMDS", "MPC85xxMDS";
13
14 aliases {
15 pci0 = &pci0;
16 pci1 = &pci1;
17 rapidio0 = &rio;
18 };
19
20 memory {
21 device_type = "memory";
22 reg = <0x0 0x0 0x0 0x0>;
23 };
24
25 lbc: localbus@e0005000 {
26 reg = <0x0 0xe0005000 0x0 0x1000>;
27 ranges = <0x0 0x0 0xfe000000 0x02000000
28 0x1 0x0 0xf8000000 0x00008000
29 0x2 0x0 0xf0000000 0x04000000
30 0x4 0x0 0xf8008000 0x00008000
31 0x5 0x0 0xf8010000 0x00008000>;
32
33 nor@0,0 {
34 #address-cells = <1>;
35 #size-cells = <1>;
36 compatible = "cfi-flash";
37 reg = <0x0 0x0 0x02000000>;
38 bank-width = <2>;
39 device-width = <2>;
40 };
41
42 bcsr@1,0 {
43 #address-cells = <1>;
44 #size-cells = <1>;
45 compatible = "fsl,mpc8568mds-bcsr";
46 reg = <1 0 0x8000>;
47 ranges = <0 1 0 0x8000>;
48
49 bcsr5: gpio-controller@11 {
50 #gpio-cells = <2>;
51 compatible = "fsl,mpc8568mds-bcsr-gpio";
52 reg = <0x5 0x1>;
53 gpio-controller;
54 };
55 };
56
57 pib@4,0 {
58 compatible = "fsl,mpc8568mds-pib";
59 reg = <4 0 0x8000>;
60 };
61
62 pib@5,0 {
63 compatible = "fsl,mpc8568mds-pib";
64 reg = <5 0 0x8000>;
65 };
66 };
67
68 soc: soc8568@e0000000 {
69 ranges = <0x0 0x0 0xe0000000 0x100000>;
70
71 i2c-sleep-nexus {
72 i2c@3000 {
73 rtc@68 {
74 compatible = "dallas,ds1374";
75 reg = <0x68>;
76 interrupts = <3 1 0 0>;
77 };
78 };
79 };
80
81 enet0: ethernet@24000 {
82 tbi-handle = <&tbi0>;
83 phy-handle = <&phy2>;
84 };
85
86 mdio@24520 {
87 phy0: ethernet-phy@7 {
88 interrupts = <1 1 0 0>;
89 reg = <0x7>;
90 };
91 phy1: ethernet-phy@1 {
92 interrupts = <2 1 0 0>;
93 reg = <0x1>;
94 };
95 phy2: ethernet-phy@2 {
96 interrupts = <1 1 0 0>;
97 reg = <0x2>;
98 };
99 phy3: ethernet-phy@3 {
100 interrupts = <2 1 0 0>;
101 reg = <0x3>;
102 };
103 tbi0: tbi-phy@11 {
104 reg = <0x11>;
105 device_type = "tbi-phy";
106 };
107 };
108
109 enet1: ethernet@25000 {
110 tbi-handle = <&tbi1>;
111 phy-handle = <&phy3>;
112 sleep = <&pmc 0x00000040>;
113 };
114
115 mdio@25520 {
116 tbi1: tbi-phy@11 {
117 reg = <0x11>;
118 device_type = "tbi-phy";
119 };
120 };
121
122 par_io@e0100 {
123 num-ports = <7>;
124
125 pio1: ucc_pin@1 {
126 pio-map = <
127 /* port pin dir open_drain assignment has_irq */
128 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
129 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
130 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
131 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
132 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
133 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
134 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
135 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
136 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
137 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
138 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
139 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
140 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
141 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
142 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
143 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
144 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
145 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
146 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
147 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
148 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
149 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
150 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */
151 };
152
153 pio2: ucc_pin@2 {
154 pio-map = <
155 /* port pin dir open_drain assignment has_irq */
156 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
157 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
158 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
159 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
160 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
161 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
162 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
163 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
164 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
165 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
166 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
167 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
168 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
169 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
170 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
171 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
172 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
173 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
174 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
175 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
176 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
177 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
178 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */
179 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */
180 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */
181 };
182 };
183 };
184
185 qe: qe@e0080000 {
186 ranges = <0x0 0x0 0xe0080000 0x40000>;
187 reg = <0x0 0xe0080000 0x0 0x480>;
188
189 spi@4c0 {
190 mode = "cpu";
191 };
192
193 spi@500 {
194 mode = "cpu";
195 };
196
197 enet2: ucc@2000 {
198 device_type = "network";
199 compatible = "ucc_geth";
200 local-mac-address = [ 00 00 00 00 00 00 ];
201 rx-clock-name = "none";
202 tx-clock-name = "clk16";
203 pio-handle = <&pio1>;
204 phy-handle = <&phy0>;
205 phy-connection-type = "rgmii-id";
206 };
207
208 enet3: ucc@3000 {
209 device_type = "network";
210 compatible = "ucc_geth";
211 local-mac-address = [ 00 00 00 00 00 00 ];
212 rx-clock-name = "none";
213 tx-clock-name = "clk16";
214 pio-handle = <&pio2>;
215 phy-handle = <&phy1>;
216 phy-connection-type = "rgmii-id";
217 };
218
219 mdio@2120 {
220 #address-cells = <1>;
221 #size-cells = <0>;
222 reg = <0x2120 0x18>;
223 compatible = "fsl,ucc-mdio";
224
225 /* These are the same PHYs as on
226 * gianfar's MDIO bus */
227 qe_phy0: ethernet-phy@7 {
228 interrupt-parent = <&mpic>;
229 interrupts = <1 1 0 0>;
230 reg = <0x7>;
231 };
232 qe_phy1: ethernet-phy@1 {
233 interrupt-parent = <&mpic>;
234 interrupts = <2 1 0 0>;
235 reg = <0x1>;
236 };
237 qe_phy2: ethernet-phy@2 {
238 interrupt-parent = <&mpic>;
239 interrupts = <1 1 0 0>;
240 reg = <0x2>;
241 };
242 qe_phy3: ethernet-phy@3 {
243 interrupt-parent = <&mpic>;
244 interrupts = <2 1 0 0>;
245 reg = <0x3>;
246 };
247 };
248 };
249
250 pci0: pci@e0008000 {
251 reg = <0x0 0xe0008000 0x0 0x1000>;
252 ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
253 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
254 clock-frequency = <66666666>;
255 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
256 interrupt-map = <
257 /* IDSEL 0x12 AD18 */
258 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
259 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
260 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
261 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
262
263 /* IDSEL 0x13 AD19 */
264 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
265 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
266 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
267 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
268 };
269
270 /* PCI Express */
271 pci1: pcie@e000a000 {
272 ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
273 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
274 reg = <0x0 0xe000a000 0x0 0x1000>;
275 pcie@0 {
276 ranges = <0x2000000 0x0 0xa0000000
277 0x2000000 0x0 0xa0000000
278 0x0 0x10000000
279
280 0x1000000 0x0 0x0
281 0x1000000 0x0 0x0
282 0x0 0x800000>;
283 };
284 };
285
286 rio: rapidio@e00c00000 {
287 reg = <0x0 0xe00c0000 0x0 0x20000>;
288 port1 {
289 ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
290 };
291 };
292
293 leds {
294 compatible = "gpio-leds";
295
296 green {
297 gpios = <&bcsr5 1 0>;
298 };
299
300 amber {
301 gpios = <&bcsr5 2 0>;
302 };
303
304 red {
305 gpios = <&bcsr5 3 0>;
306 };
307 };
308};
309
310/include/ "mpc8568si-post.dtsi"