Loading...
Note: File does not exist in v4.17.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Gose board
4 *
5 * Copyright (C) 2014-2015 Renesas Electronics Corporation
6 */
7
8/*
9 * SSI-AK4643
10 *
11 * SW1: 1: AK4643
12 * 2: CN22
13 * 3: ADV7511
14 *
15 * This command is required when Playback/Capture
16 *
17 * amixer set "LINEOUT Mixer DACL" on
18 * amixer set "DVC Out" 100%
19 * amixer set "DVC In" 100%
20 *
21 * You can use Mute
22 *
23 * amixer set "DVC Out Mute" on
24 * amixer set "DVC In Mute" on
25 *
26 * You can use Volume Ramp
27 *
28 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
29 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
30 * amixer set "DVC Out Ramp" on
31 * aplay xxx.wav &
32 * amixer set "DVC Out" 80% // Volume Down
33 * amixer set "DVC Out" 100% // Volume Up
34 */
35
36/dts-v1/;
37#include "r8a7793.dtsi"
38#include <dt-bindings/gpio/gpio.h>
39#include <dt-bindings/input/input.h>
40
41/ {
42 model = "Gose";
43 compatible = "renesas,gose", "renesas,r8a7793";
44
45 aliases {
46 serial0 = &scif0;
47 serial1 = &scif1;
48 i2c9 = &gpioi2c2;
49 i2c10 = &gpioi2c4;
50 i2c11 = &i2chdmi;
51 i2c12 = &i2cexio4;
52 mmc0 = &sdhi0;
53 mmc1 = &sdhi1;
54 mmc2 = &sdhi2;
55 };
56
57 chosen {
58 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
59 stdout-path = "serial0:115200n8";
60 };
61
62 memory@40000000 {
63 device_type = "memory";
64 reg = <0 0x40000000 0 0x40000000>;
65 };
66
67 keyboard {
68 compatible = "gpio-keys";
69
70 pinctrl-0 = <&keyboard_pins>;
71 pinctrl-names = "default";
72
73 key-1 {
74 gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
75 linux,code = <KEY_1>;
76 label = "SW2-1";
77 wakeup-source;
78 debounce-interval = <20>;
79 };
80 key-2 {
81 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_2>;
83 label = "SW2-2";
84 wakeup-source;
85 debounce-interval = <20>;
86 };
87 key-3 {
88 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
89 linux,code = <KEY_3>;
90 label = "SW2-3";
91 wakeup-source;
92 debounce-interval = <20>;
93 };
94 key-4 {
95 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
96 linux,code = <KEY_4>;
97 label = "SW2-4";
98 wakeup-source;
99 debounce-interval = <20>;
100 };
101 key-a {
102 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
103 linux,code = <KEY_A>;
104 label = "SW30";
105 wakeup-source;
106 debounce-interval = <20>;
107 };
108 key-b {
109 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
110 linux,code = <KEY_B>;
111 label = "SW31";
112 wakeup-source;
113 debounce-interval = <20>;
114 };
115 key-c {
116 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
117 linux,code = <KEY_C>;
118 label = "SW32";
119 wakeup-source;
120 debounce-interval = <20>;
121 };
122 key-d {
123 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
124 linux,code = <KEY_D>;
125 label = "SW33";
126 wakeup-source;
127 debounce-interval = <20>;
128 };
129 key-e {
130 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
131 linux,code = <KEY_E>;
132 label = "SW34";
133 wakeup-source;
134 debounce-interval = <20>;
135 };
136 key-f {
137 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
138 linux,code = <KEY_F>;
139 label = "SW35";
140 wakeup-source;
141 debounce-interval = <20>;
142 };
143 key-g {
144 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
145 linux,code = <KEY_G>;
146 label = "SW36";
147 wakeup-source;
148 debounce-interval = <20>;
149 };
150 };
151
152 leds {
153 compatible = "gpio-leds";
154 led6 {
155 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
156 label = "LED6";
157 };
158 led7 {
159 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
160 label = "LED7";
161 };
162 led8 {
163 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
164 label = "LED8";
165 };
166 };
167
168 reg_1p8v: regulator-1v8 {
169 compatible = "regulator-fixed";
170 regulator-name = "fixed-1.8V";
171 regulator-min-microvolt = <1800000>;
172 regulator-max-microvolt = <1800000>;
173 regulator-boot-on;
174 regulator-always-on;
175 };
176
177 reg_3p3v: regulator-3v3 {
178 compatible = "regulator-fixed";
179 regulator-name = "fixed-3.3V";
180 regulator-min-microvolt = <3300000>;
181 regulator-max-microvolt = <3300000>;
182 regulator-boot-on;
183 regulator-always-on;
184 };
185
186 vcc_sdhi0: regulator-vcc-sdhi0 {
187 compatible = "regulator-fixed";
188
189 regulator-name = "SDHI0 Vcc";
190 regulator-min-microvolt = <3300000>;
191 regulator-max-microvolt = <3300000>;
192
193 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
194 enable-active-high;
195 };
196
197 vccq_sdhi0: regulator-vccq-sdhi0 {
198 compatible = "regulator-gpio";
199
200 regulator-name = "SDHI0 VccQ";
201 regulator-min-microvolt = <1800000>;
202 regulator-max-microvolt = <3300000>;
203
204 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
205 gpios-states = <1>;
206 states = <3300000 1>, <1800000 0>;
207 };
208
209 vcc_sdhi1: regulator-vcc-sdhi1 {
210 compatible = "regulator-fixed";
211
212 regulator-name = "SDHI1 Vcc";
213 regulator-min-microvolt = <3300000>;
214 regulator-max-microvolt = <3300000>;
215
216 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
217 enable-active-high;
218 };
219
220 vccq_sdhi1: regulator-vccq-sdhi1 {
221 compatible = "regulator-gpio";
222
223 regulator-name = "SDHI1 VccQ";
224 regulator-min-microvolt = <1800000>;
225 regulator-max-microvolt = <3300000>;
226
227 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
228 gpios-states = <1>;
229 states = <3300000 1>, <1800000 0>;
230 };
231
232 vcc_sdhi2: regulator-vcc-sdhi2 {
233 compatible = "regulator-fixed";
234
235 regulator-name = "SDHI2 Vcc";
236 regulator-min-microvolt = <3300000>;
237 regulator-max-microvolt = <3300000>;
238
239 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
240 enable-active-high;
241 };
242
243 vccq_sdhi2: regulator-vccq-sdhi2 {
244 compatible = "regulator-gpio";
245
246 regulator-name = "SDHI2 VccQ";
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <3300000>;
249
250 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
251 gpios-states = <1>;
252 states = <3300000 1>, <1800000 0>;
253 };
254
255 audio_clock: audio_clock {
256 compatible = "fixed-clock";
257 #clock-cells = <0>;
258 clock-frequency = <11289600>;
259 };
260
261 rsnd_ak4643: sound {
262 compatible = "simple-audio-card";
263
264 simple-audio-card,format = "left_j";
265 simple-audio-card,bitclock-master = <&sndcodec>;
266 simple-audio-card,frame-master = <&sndcodec>;
267
268 sndcpu: simple-audio-card,cpu {
269 sound-dai = <&rcar_sound>;
270 };
271
272 sndcodec: simple-audio-card,codec {
273 sound-dai = <&ak4643>;
274 clocks = <&audio_clock>;
275 };
276 };
277
278 hdmi-in {
279 compatible = "hdmi-connector";
280 type = "a";
281
282 port {
283 hdmi_con_in: endpoint {
284 remote-endpoint = <&adv7612_in>;
285 };
286 };
287 };
288
289 hdmi-out {
290 compatible = "hdmi-connector";
291 type = "a";
292
293 port {
294 hdmi_con_out: endpoint {
295 remote-endpoint = <&adv7511_out>;
296 };
297 };
298 };
299
300 composite-in {
301 compatible = "composite-video-connector";
302
303 port {
304 composite_con_in: endpoint {
305 remote-endpoint = <&adv7180_in>;
306 };
307 };
308 };
309
310 x2_clk: x2-clock {
311 compatible = "fixed-clock";
312 #clock-cells = <0>;
313 clock-frequency = <74250000>;
314 };
315
316 x13_clk: x13-clock {
317 compatible = "fixed-clock";
318 #clock-cells = <0>;
319 clock-frequency = <148500000>;
320 };
321
322 gpioi2c2: i2c-9 {
323 #address-cells = <1>;
324 #size-cells = <0>;
325 compatible = "i2c-gpio";
326 status = "disabled";
327 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
328 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
329 i2c-gpio,delay-us = <5>;
330 };
331
332 gpioi2c4: i2c-10 {
333 #address-cells = <1>;
334 #size-cells = <0>;
335 compatible = "i2c-gpio";
336 status = "disabled";
337 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
338 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
339 i2c-gpio,delay-us = <5>;
340 };
341
342 /*
343 * A fallback to GPIO is provided for I2C2.
344 */
345 i2chdmi: i2c-mux1 {
346 compatible = "i2c-demux-pinctrl";
347 i2c-parent = <&i2c2>, <&gpioi2c2>;
348 i2c-bus-name = "i2c-hdmi";
349 #address-cells = <1>;
350 #size-cells = <0>;
351
352 ak4643: codec@12 {
353 compatible = "asahi-kasei,ak4643";
354 #sound-dai-cells = <0>;
355 reg = <0x12>;
356 };
357
358 composite-in@20 {
359 compatible = "adi,adv7180cp";
360 reg = <0x20>;
361
362 ports {
363 #address-cells = <1>;
364 #size-cells = <0>;
365
366 port@0 {
367 reg = <0>;
368 adv7180_in: endpoint {
369 remote-endpoint = <&composite_con_in>;
370 };
371 };
372
373 port@3 {
374 reg = <3>;
375 adv7180_out: endpoint {
376 bus-width = <8>;
377 remote-endpoint = <&vin1ep>;
378 };
379 };
380 };
381 };
382
383 hdmi@39 {
384 compatible = "adi,adv7511w";
385 reg = <0x39>;
386 interrupt-parent = <&gpio3>;
387 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
388
389 avdd-supply = <®_1p8v>;
390 dvdd-supply = <®_1p8v>;
391 pvdd-supply = <®_1p8v>;
392 dvdd-3v-supply = <®_3p3v>;
393 bgvdd-supply = <®_1p8v>;
394
395 adi,input-depth = <8>;
396 adi,input-colorspace = "rgb";
397 adi,input-clock = "1x";
398
399 ports {
400 #address-cells = <1>;
401 #size-cells = <0>;
402
403 port@0 {
404 reg = <0>;
405 adv7511_in: endpoint {
406 remote-endpoint = <&du_out_rgb>;
407 };
408 };
409
410 port@1 {
411 reg = <1>;
412 adv7511_out: endpoint {
413 remote-endpoint = <&hdmi_con_out>;
414 };
415 };
416 };
417 };
418
419 hdmi-in@4c {
420 compatible = "adi,adv7612";
421 reg = <0x4c>;
422 interrupt-parent = <&gpio4>;
423 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
424 default-input = <0>;
425
426 ports {
427 #address-cells = <1>;
428 #size-cells = <0>;
429
430 port@0 {
431 reg = <0>;
432 adv7612_in: endpoint {
433 remote-endpoint = <&hdmi_con_in>;
434 };
435 };
436
437 port@2 {
438 reg = <2>;
439 adv7612_out: endpoint {
440 remote-endpoint = <&vin0ep2>;
441 };
442 };
443 };
444 };
445
446 eeprom@50 {
447 compatible = "renesas,r1ex24002", "atmel,24c02";
448 reg = <0x50>;
449 pagesize = <16>;
450 };
451 };
452
453 /*
454 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
455 * A fallback to GPIO is provided.
456 */
457 i2cexio4: i2c-mux2 {
458 compatible = "i2c-demux-pinctrl";
459 i2c-parent = <&i2c4>, <&gpioi2c4>;
460 i2c-bus-name = "i2c-exio4";
461 #address-cells = <1>;
462 #size-cells = <0>;
463 };
464};
465
466&du {
467 pinctrl-0 = <&du_pins>;
468 pinctrl-names = "default";
469 status = "okay";
470
471 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
472 <&x13_clk>, <&x2_clk>;
473 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
474
475 ports {
476 port@0 {
477 endpoint {
478 remote-endpoint = <&adv7511_in>;
479 };
480 };
481 };
482};
483
484&lvds0 {
485 ports {
486 port@1 {
487 lvds_connector: endpoint {
488 };
489 };
490 };
491};
492
493&extal_clk {
494 clock-frequency = <20000000>;
495};
496
497&pfc {
498 pinctrl-0 = <&scif_clk_pins>;
499 pinctrl-names = "default";
500
501 i2c2_pins: i2c2 {
502 groups = "i2c2";
503 function = "i2c2";
504 };
505
506 i2c4_pins: i2c4 {
507 groups = "i2c4_c";
508 function = "i2c4";
509 };
510
511 du_pins: du {
512 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
513 function = "du";
514 };
515
516 scif0_pins: scif0 {
517 groups = "scif0_data_d";
518 function = "scif0";
519 };
520
521 scif1_pins: scif1 {
522 groups = "scif1_data_d";
523 function = "scif1";
524 };
525
526 scif_clk_pins: scif_clk {
527 groups = "scif_clk";
528 function = "scif_clk";
529 };
530
531 ether_pins: ether {
532 groups = "eth_link", "eth_mdio", "eth_rmii";
533 function = "eth";
534 };
535
536 phy1_pins: phy1 {
537 groups = "intc_irq0";
538 function = "intc";
539 };
540
541 pmic_irq_pins: pmicirq {
542 groups = "intc_irq2";
543 function = "intc";
544 };
545
546 sdhi0_pins: sd0 {
547 groups = "sdhi0_data4", "sdhi0_ctrl";
548 function = "sdhi0";
549 power-source = <3300>;
550 };
551
552 sdhi0_pins_uhs: sd0_uhs {
553 groups = "sdhi0_data4", "sdhi0_ctrl";
554 function = "sdhi0";
555 power-source = <1800>;
556 };
557
558 sdhi1_pins: sd1 {
559 groups = "sdhi1_data4", "sdhi1_ctrl";
560 function = "sdhi1";
561 power-source = <3300>;
562 };
563
564 sdhi1_pins_uhs: sd1_uhs {
565 groups = "sdhi1_data4", "sdhi1_ctrl";
566 function = "sdhi1";
567 power-source = <1800>;
568 };
569
570 sdhi2_pins: sd2 {
571 groups = "sdhi2_data4", "sdhi2_ctrl";
572 function = "sdhi2";
573 power-source = <3300>;
574 };
575
576 sdhi2_pins_uhs: sd2_uhs {
577 groups = "sdhi2_data4", "sdhi2_ctrl";
578 function = "sdhi2";
579 power-source = <1800>;
580 };
581
582 qspi_pins: qspi {
583 groups = "qspi_ctrl", "qspi_data4";
584 function = "qspi";
585 };
586
587 sound_pins: sound {
588 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
589 function = "ssi";
590 };
591
592 sound_clk_pins: sound_clk {
593 groups = "audio_clk_a";
594 function = "audio_clk";
595 };
596
597 keyboard_pins: keyboard {
598 pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
599 bias-pull-up;
600 };
601
602 vin0_pins: vin0 {
603 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
604 function = "vin0";
605 };
606
607 vin1_pins: vin1 {
608 groups = "vin1_data8", "vin1_clk";
609 function = "vin1";
610 };
611};
612
613ðer {
614 pinctrl-0 = <ðer_pins>, <&phy1_pins>;
615 pinctrl-names = "default";
616
617 phy-handle = <&phy1>;
618 renesas,ether-link-active-low;
619 status = "okay";
620
621 phy1: ethernet-phy@1 {
622 compatible = "ethernet-phy-id0022.1537",
623 "ethernet-phy-ieee802.3-c22";
624 reg = <1>;
625 interrupt-parent = <&irqc0>;
626 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
627 micrel,led-mode = <1>;
628 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
629 };
630};
631
632&cmt0 {
633 status = "okay";
634};
635
636&cpu0 {
637 cpu0-supply = <&vdd_dvfs>;
638};
639
640&rwdt {
641 timeout-sec = <60>;
642 status = "okay";
643};
644
645&scif0 {
646 pinctrl-0 = <&scif0_pins>;
647 pinctrl-names = "default";
648
649 status = "okay";
650};
651
652&scif1 {
653 pinctrl-0 = <&scif1_pins>;
654 pinctrl-names = "default";
655
656 status = "okay";
657};
658
659&scif_clk {
660 clock-frequency = <14745600>;
661};
662
663&sdhi0 {
664 pinctrl-0 = <&sdhi0_pins>;
665 pinctrl-1 = <&sdhi0_pins_uhs>;
666 pinctrl-names = "default", "state_uhs";
667
668 vmmc-supply = <&vcc_sdhi0>;
669 vqmmc-supply = <&vccq_sdhi0>;
670 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
671 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
672 sd-uhs-sdr50;
673 sd-uhs-sdr104;
674 status = "okay";
675};
676
677&sdhi1 {
678 pinctrl-0 = <&sdhi1_pins>;
679 pinctrl-1 = <&sdhi1_pins_uhs>;
680 pinctrl-names = "default", "state_uhs";
681
682 vmmc-supply = <&vcc_sdhi1>;
683 vqmmc-supply = <&vccq_sdhi1>;
684 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
685 wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
686 sd-uhs-sdr50;
687 status = "okay";
688};
689
690&sdhi2 {
691 pinctrl-0 = <&sdhi2_pins>;
692 pinctrl-1 = <&sdhi2_pins_uhs>;
693 pinctrl-names = "default", "state_uhs";
694
695 vmmc-supply = <&vcc_sdhi2>;
696 vqmmc-supply = <&vccq_sdhi2>;
697 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
698 sd-uhs-sdr50;
699 status = "okay";
700};
701
702&qspi {
703 pinctrl-0 = <&qspi_pins>;
704 pinctrl-names = "default";
705
706 status = "okay";
707
708 flash@0 {
709 compatible = "spansion,s25fl512s", "jedec,spi-nor";
710 reg = <0>;
711 spi-max-frequency = <30000000>;
712 spi-tx-bus-width = <4>;
713 spi-rx-bus-width = <4>;
714 spi-cpol;
715 spi-cpha;
716 m25p,fast-read;
717
718 partitions {
719 compatible = "fixed-partitions";
720 #address-cells = <1>;
721 #size-cells = <1>;
722
723 partition@0 {
724 label = "loader";
725 reg = <0x00000000 0x00040000>;
726 read-only;
727 };
728 partition@40000 {
729 label = "user";
730 reg = <0x00040000 0x00400000>;
731 read-only;
732 };
733 partition@440000 {
734 label = "flash";
735 reg = <0x00440000 0x03bc0000>;
736 };
737 };
738 };
739};
740
741&i2c2 {
742 pinctrl-0 = <&i2c2_pins>;
743 pinctrl-names = "i2c-hdmi";
744
745 status = "okay";
746 clock-frequency = <100000>;
747
748};
749
750&i2c6 {
751 pinctrl-names = "default";
752 pinctrl-0 = <&pmic_irq_pins>;
753 status = "okay";
754 clock-frequency = <100000>;
755
756 pmic@58 {
757 compatible = "dlg,da9063";
758 reg = <0x58>;
759 interrupt-parent = <&irqc0>;
760 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
761 interrupt-controller;
762 #interrupt-cells = <2>;
763
764 rtc {
765 compatible = "dlg,da9063-rtc";
766 };
767
768 watchdog {
769 compatible = "dlg,da9063-watchdog";
770 };
771 };
772
773 vdd_dvfs: regulator@68 {
774 compatible = "dlg,da9210";
775 reg = <0x68>;
776 interrupt-parent = <&irqc0>;
777 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
778
779 regulator-min-microvolt = <1000000>;
780 regulator-max-microvolt = <1000000>;
781 regulator-boot-on;
782 regulator-always-on;
783 };
784};
785
786&i2c4 {
787 pinctrl-0 = <&i2c4_pins>;
788 pinctrl-names = "i2c-exio4";
789};
790
791&rcar_sound {
792 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
793 pinctrl-names = "default";
794
795 /* Single DAI */
796 #sound-dai-cells = <0>;
797
798 status = "okay";
799
800 rcar_sound,dai {
801 dai0 {
802 playback = <&ssi0>, <&src2>, <&dvc0>;
803 capture = <&ssi1>, <&src3>, <&dvc1>;
804 };
805 };
806};
807
808&ssi1 {
809 shared-pin;
810};
811
812/* HDMI video input */
813&vin0 {
814 status = "okay";
815 pinctrl-0 = <&vin0_pins>;
816 pinctrl-names = "default";
817
818 port {
819 vin0ep2: endpoint {
820 remote-endpoint = <&adv7612_out>;
821 bus-width = <24>;
822 hsync-active = <0>;
823 vsync-active = <0>;
824 pclk-sample = <1>;
825 data-active = <1>;
826 };
827 };
828};
829
830/* composite video input */
831&vin1 {
832 pinctrl-0 = <&vin1_pins>;
833 pinctrl-names = "default";
834
835 status = "okay";
836
837 port {
838 vin1ep: endpoint {
839 remote-endpoint = <&adv7180_out>;
840 bus-width = <8>;
841 };
842 };
843};